Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 412

Last change on this file since 412 was 411, checked in by heinze, 15 years ago
Large scale vertical motion (subsidence/ascent) can be applied to the prognostic equation for the potential temperature
Property svn:keywords set to `Id`
File size: 75.2 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[411]	6	! +large scale vertical motion (subsidence/ascent)
[392]	7	!
	8	!
[410]	9	! Branch revisions:
	10	! -----------------
	11	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
	12	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
	13	!
[392]	14	! Former revisions:
	15	! -----------------
	16	! $Id: header.f90 411 2009-12-11 14:15:58Z raasch $
	17	!
	18	! 346 2009-07-06 10:13:41Z raasch
[328]	19	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	20	! Coupling with independent precursor runs.
[254]	21	! Output of messages replaced by message handling routine.
[336]	22	! Output of several additional dvr parameters
[240]	23	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	24	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	25	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	26	! topography_grid_convention moved from user_header
[292]	27	! small bugfix concerning 3d 64bit netcdf output format
[1]	28	!
[226]	29	! 206 2008-10-13 14:59:11Z raasch
	30	! Bugfix: error in zu index in case of section_xy = -1
	31	!
[200]	32	! 198 2008-09-17 08:55:28Z raasch
	33	! Format adjustments allowing output of larger revision numbers
	34	!
[198]	35	! 197 2008-09-16 15:29:03Z raasch
	36	! allow 100 spectra levels instead of 10 for consistency with
	37	! define_netcdf_header,
	38	! bugfix in the output of the characteristic levels of potential temperature,
	39	! geostrophic wind, scalar concentration, humidity and leaf area density,
	40	! output of turbulence recycling informations
	41	!
[139]	42	! 138 2007-11-28 10:03:58Z letzel
	43	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	44	! Allow two instead of one digit to specify isosurface and slicer variables.
	45	! Output of sorting frequency of particles
	46	!
[110]	47	! 108 2007-08-24 15:10:38Z letzel
	48	! Output of informations for coupled model runs (boundary conditions etc.)
	49	! + output of momentumfluxes at the top boundary
	50	! Rayleigh damping for ocean, e_init
	51	!
[98]	52	! 97 2007-06-21 08:23:15Z raasch
	53	! Adjustments for the ocean version.
	54	! use_pt_reference renamed use_reference
	55	!
[90]	56	! 87 2007-05-22 15:46:47Z raasch
	57	! Bugfix: output of use_upstream_for_tke
	58	!
[83]	59	! 82 2007-04-16 15:40:52Z raasch
	60	! Preprocessor strings for different linux clusters changed to "lc",
	61	! routine local_flush is used for buffer flushing
	62	!
[77]	63	! 76 2007-03-29 00:58:32Z raasch
	64	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	65	! output of the loop optimization method, moisture renamed humidity,
	66	! output of subversion revision number
	67	!
[39]	68	! 19 2007-02-23 04:53:48Z raasch
	69	! Output of scalar flux applied at top boundary
	70	!
[3]	71	! RCS Log replace by Id keyword, revision history cleaned up
	72	!
[1]	73	! Revision 1.63 2006/08/22 13:53:13 raasch
	74	! Output of dz_max
	75	!
	76	! Revision 1.1 1997/08/11 06:17:20 raasch
	77	! Initial revision
	78	!
	79	!
	80	! Description:
	81	! ------------
	82	! Writing a header with all important informations about the actual run.
	83	! This subroutine is called three times, two times at the beginning
	84	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	85	! end of the run, then writing additional information about CPU-usage on file
	86	! header.
[411]	87	!-----------------------------------------------------------------------------!
[1]	88
	89	USE arrays_3d
	90	USE control_parameters
	91	USE cloud_parameters
	92	USE cpulog
	93	USE dvrp_variables
	94	USE grid_variables
	95	USE indices
	96	USE model_1d
	97	USE particle_attributes
	98	USE pegrid
[411]	99	USE subsidence_mod
[1]	100	USE spectrum
	101
	102	IMPLICIT NONE
	103
	104	CHARACTER (LEN=1) :: prec
	105	CHARACTER (LEN=2) :: do2d_mode
	106	CHARACTER (LEN=5) :: section_chr
	107	CHARACTER (LEN=9) :: time_to_string
	108	CHARACTER (LEN=10) :: coor_chr, host_chr
	109	CHARACTER (LEN=16) :: begin_chr
[200]	110	CHARACTER (LEN=23) :: ver_rev
[1]	111	CHARACTER (LEN=40) :: output_format
[167]	112	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	113	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	114	domask_chr, run_classification
[167]	115	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	116	temperatures, ugcomponent, vgcomponent
[1]	117	CHARACTER (LEN=85) :: roben, runten
	118
[410]	119	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	120
	121	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	122	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	123	REAL :: cpuseconds_per_simulated_second
	124
	125	!
	126	!-- Open the output file. At the end of the simulation, output is directed
	127	!-- to unit 19.
	128	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	129	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	130	io = 15 ! header output on file RUN_CONTROL
	131	ELSE
	132	io = 19 ! header output on file HEADER
	133	ENDIF
	134	CALL check_open( io )
	135
	136	!
	137	!-- At the end of the run, output file (HEADER) will be rewritten with
	138	!-- new informations
	139	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	140
	141	!
	142	!-- Determine kind of model run
	143	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	144	run_classification = '3D - restart run'
[328]	145	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	146	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	147	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	148	run_classification = '3D - run without 1D - prerun'
[197]	149	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	150	run_classification = '3D - run with 1D - prerun'
[197]	151	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	152	run_classification = '3D - run initialized by user'
[1]	153	ELSE
[254]	154	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	155	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	156	ENDIF
[97]	157	IF ( ocean ) THEN
	158	run_classification = 'ocean - ' // run_classification
	159	ELSE
	160	run_classification = 'atmosphere - ' // run_classification
	161	ENDIF
[1]	162
	163	!
	164	!-- Run-identification, date, time, host
	165	host_chr = host(1:10)
[75]	166	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	167	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	168	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	169	#if defined( __mpi2 )
	170	mpi_type = 2
	171	#else
	172	mpi_type = 1
	173	#endif
	174	WRITE ( io, 101 ) mpi_type, coupling_mode
	175	ENDIF
[102]	176	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	177	ADJUSTR( host_chr )
[1]	178	#if defined( __parallel )
	179	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	180	char1 = 'calculated'
	181	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	182	host(1:2) == 'lc' ) .AND. &
	183	npex == -1 .AND. pdims(2) == 1 ) THEN
	184	char1 = 'forced'
	185	ELSE
	186	char1 = 'predefined'
	187	ENDIF
	188	IF ( threads_per_task == 1 ) THEN
[102]	189	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	190	ELSE
[102]	191	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	192	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	193	ENDIF
	194	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	195	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	196	npex == -1 .AND. pdims(2) == 1 ) &
	197	THEN
[102]	198	WRITE ( io, 106 )
[1]	199	ELSEIF ( pdims(2) == 1 ) THEN
[102]	200	WRITE ( io, 107 ) 'x'
[1]	201	ELSEIF ( pdims(1) == 1 ) THEN
[102]	202	WRITE ( io, 107 ) 'y'
[1]	203	ENDIF
[102]	204	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	205	#endif
	206	WRITE ( io, 99 )
	207
	208	!
	209	!-- Numerical schemes
	210	WRITE ( io, 110 )
	211	IF ( psolver(1:7) == 'poisfft' ) THEN
	212	WRITE ( io, 111 ) TRIM( fft_method )
	213	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	214	ELSEIF ( psolver == 'sor' ) THEN
	215	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	216	ELSEIF ( psolver == 'multigrid' ) THEN
	217	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	218	IF ( mg_cycles == -1 ) THEN
	219	WRITE ( io, 140 ) residual_limit
	220	ELSE
	221	WRITE ( io, 141 ) mg_cycles
	222	ENDIF
	223	IF ( mg_switch_to_pe0_level == 0 ) THEN
	224	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	225	nzt_mg(1)
[197]	226	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	227	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	228	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	229	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	230	nzt_mg(mg_switch_to_pe0_level), &
	231	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	232	nzt_mg(1)
	233	ENDIF
	234	ENDIF
	235	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	236	THEN
	237	WRITE ( io, 142 )
	238	ENDIF
	239
	240	IF ( momentum_advec == 'pw-scheme' ) THEN
	241	WRITE ( io, 113 )
	242	ELSE
	243	WRITE ( io, 114 )
	244	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	245	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	246	overshoot_limit_w /= 0.0 ) THEN
	247	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	248	overshoot_limit_w
	249	ENDIF
	250	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	251	ups_limit_w /= 0.0 ) &
	252	THEN
	253	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	254	ENDIF
	255	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	256	ENDIF
	257	IF ( scalar_advec == 'pw-scheme' ) THEN
	258	WRITE ( io, 116 )
	259	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	260	WRITE ( io, 117 )
	261	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	262	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	263	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	264	ENDIF
	265	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	266	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	267	ENDIF
	268	ELSE
	269	WRITE ( io, 118 )
	270	ENDIF
[63]	271
	272	WRITE ( io, 139 ) TRIM( loop_optimization )
	273
[1]	274	IF ( galilei_transformation ) THEN
	275	IF ( use_ug_for_galilei_tr ) THEN
	276	char1 = 'geostrophic wind'
	277	ELSE
	278	char1 = 'mean wind in model domain'
	279	ENDIF
	280	IF ( simulated_time_at_begin == simulated_time ) THEN
	281	char2 = 'at the start of the run'
	282	ELSE
	283	char2 = 'at the end of the run'
	284	ENDIF
	285	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	286	advected_distance_x/1000.0, advected_distance_y/1000.0
	287	ENDIF
	288	IF ( timestep_scheme == 'leapfrog' ) THEN
	289	WRITE ( io, 120 )
	290	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	291	WRITE ( io, 121 )
	292	ELSE
	293	WRITE ( io, 122 ) timestep_scheme
	294	ENDIF
[87]	295	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	296	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	297	IF ( .NOT. ocean ) THEN
	298	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	299	rayleigh_damping_factor
	300	ELSE
	301	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	302	rayleigh_damping_factor
	303	ENDIF
[1]	304	ENDIF
[75]	305	IF ( humidity ) THEN
[1]	306	IF ( .NOT. cloud_physics ) THEN
	307	WRITE ( io, 129 )
	308	ELSE
	309	WRITE ( io, 130 )
	310	WRITE ( io, 131 )
	311	IF ( radiation ) WRITE ( io, 132 )
	312	IF ( precipitation ) WRITE ( io, 133 )
	313	ENDIF
	314	ENDIF
	315	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	316	IF ( conserve_volume_flow ) THEN
[241]	317	WRITE ( io, 150 ) conserve_volume_flow_mode
	318	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	319	WRITE ( io, 151 ) u_bulk, v_bulk
	320	ENDIF
[240]	321	ELSEIF ( dp_external ) THEN
	322	IF ( dp_smooth ) THEN
[241]	323	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	324	ELSE
[241]	325	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	326	ENDIF
	327	ENDIF
[411]	328	IF ( large_scale_subsidence ) THEN
	329	WRITE ( io, 153 )
	330	WRITE ( io, 154 )
	331	ENDIF
[1]	332	WRITE ( io, 99 )
	333
	334	!
	335	!-- Runtime and timestep informations
	336	WRITE ( io, 200 )
	337	IF ( .NOT. dt_fixed ) THEN
	338	WRITE ( io, 201 ) dt_max, cfl_factor
	339	ELSE
	340	WRITE ( io, 202 ) dt
	341	ENDIF
	342	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	343
	344	IF ( time_restart /= 9999999.9 .AND. &
	345	simulated_time_at_begin == simulated_time ) THEN
	346	IF ( dt_restart == 9999999.9 ) THEN
	347	WRITE ( io, 204 ) ' Restart at: ',time_restart
	348	ELSE
	349	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	350	ENDIF
	351	ENDIF
	352
	353	IF ( simulated_time_at_begin /= simulated_time ) THEN
	354	i = MAX ( log_point_s(10)%counts, 1 )
	355	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	356	cpuseconds_per_simulated_second = 0.0
	357	ELSE
	358	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	359	( simulated_time - &
	360	simulated_time_at_begin )
	361	ENDIF
	362	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	363	log_point_s(10)%sum / REAL( i ), &
	364	cpuseconds_per_simulated_second
	365	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	366	IF ( dt_restart == 9999999.9 ) THEN
	367	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	368	ELSE
	369	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	370	ENDIF
	371	ENDIF
	372	ENDIF
	373
	374	!
[291]	375	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	376	!-- and ocean are used. In this case, coupling_start_time defines the time
	377	!-- when the coupling is switched on.
	378	IF ( coupling_start_time /= 0.0 ) THEN
	379	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	380	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	381	ELSE
	382	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	383	'precursor runs'
	384	ENDIF
	385	WRITE ( io, 207 ) char1, coupling_start_time
	386	ENDIF
	387
	388	!
[1]	389	!-- Computational grid
[94]	390	IF ( .NOT. ocean ) THEN
	391	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	392	IF ( dz_stretch_level_index < nzt+1 ) THEN
	393	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	394	dz_stretch_factor, dz_max
	395	ENDIF
	396	ELSE
	397	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	398	IF ( dz_stretch_level_index > 0 ) THEN
	399	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	400	dz_stretch_factor, dz_max
	401	ENDIF
[1]	402	ENDIF
	403	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	404	MIN( nnz+2, nzt+2 )
[76]	405	IF ( numprocs > 1 ) THEN
	406	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	407	WRITE ( io, 255 )
	408	ELSE
	409	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	410	ENDIF
[1]	411	ENDIF
	412	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	413
	414	!
	415	!-- Topography
	416	WRITE ( io, 270 ) topography
	417	SELECT CASE ( TRIM( topography ) )
	418
	419	CASE ( 'flat' )
	420	! no actions necessary
	421
	422	CASE ( 'single_building' )
	423	blx = INT( building_length_x / dx )
	424	bly = INT( building_length_y / dy )
	425	bh = INT( building_height / dz )
	426
	427	IF ( building_wall_left == 9999999.9 ) THEN
	428	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	429	ENDIF
	430	bxl = INT ( building_wall_left / dx + 0.5 )
	431	bxr = bxl + blx
	432
	433	IF ( building_wall_south == 9999999.9 ) THEN
	434	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	435	ENDIF
	436	bys = INT ( building_wall_south / dy + 0.5 )
	437	byn = bys + bly
	438
	439	WRITE ( io, 271 ) building_length_x, building_length_y, &
	440	building_height, bxl, bxr, bys, byn
	441
[240]	442	CASE ( 'single_street_canyon' )
	443	ch = NINT( canyon_height / dz )
	444	IF ( canyon_width_x /= 9999999.9 ) THEN
	445	!
	446	!-- Street canyon in y direction
	447	cwx = NINT( canyon_width_x / dx )
	448	IF ( canyon_wall_left == 9999999.9 ) THEN
	449	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	450	ENDIF
	451	cxl = NINT( canyon_wall_left / dx )
	452	cxr = cxl + cwx
	453	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	454
	455	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	456	!
	457	!-- Street canyon in x direction
	458	cwy = NINT( canyon_width_y / dy )
	459	IF ( canyon_wall_south == 9999999.9 ) THEN
	460	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	461	ENDIF
	462	cys = NINT( canyon_wall_south / dy )
	463	cyn = cys + cwy
	464	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	465	ENDIF
	466
[1]	467	END SELECT
	468
[256]	469	IF ( TRIM( topography ) /= 'flat' ) THEN
	470	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	471	IF ( TRIM( topography ) == 'single_building' .OR. &
	472	TRIM( topography ) == 'single_street_canyon' ) THEN
	473	WRITE ( io, 278 )
	474	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	475	WRITE ( io, 279 )
	476	ENDIF
	477	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	478	WRITE ( io, 278 )
	479	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	480	WRITE ( io, 279 )
	481	ENDIF
	482	ENDIF
	483
[138]	484	IF ( plant_canopy ) THEN
	485
	486	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	487	IF ( passive_scalar ) THEN
	488	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	489	leaf_surface_concentration
	490	ENDIF
[138]	491
[1]	492	!
[153]	493	!-- Heat flux at the top of vegetation
	494	WRITE ( io, 282 ) cthf
	495
	496	!
[138]	497	!-- Leaf area density profile
	498	!-- Building output strings, starting with surface value
	499	WRITE ( learde, '(F6.2)' ) lad_surface
	500	gradients = '------'
	501	slices = ' 0'
	502	coordinates = ' 0.0'
	503	i = 1
	504	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	505
	506	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	507	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	508
	509	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	510	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	511
	512	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	513	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	514
	515	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	516	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	517
	518	i = i + 1
	519	ENDDO
	520
[153]	521	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	522	TRIM( gradients ), TRIM( slices )
	523
	524	ENDIF
	525
	526	!
[1]	527	!-- Boundary conditions
	528	IF ( ibc_p_b == 0 ) THEN
	529	runten = 'p(0) = 0 \|'
	530	ELSEIF ( ibc_p_b == 1 ) THEN
	531	runten = 'p(0) = p(1) \|'
	532	ELSE
	533	runten = 'p(0) = p(1) +R\|'
	534	ENDIF
	535	IF ( ibc_p_t == 0 ) THEN
	536	roben = 'p(nzt+1) = 0 \|'
	537	ELSE
	538	roben = 'p(nzt+1) = p(nzt) \|'
	539	ENDIF
	540
	541	IF ( ibc_uv_b == 0 ) THEN
	542	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	543	ELSE
	544	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	545	ENDIF
[132]	546	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	547	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	548	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	549	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	550	ELSE
	551	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	552	ENDIF
	553
	554	IF ( ibc_pt_b == 0 ) THEN
	555	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	556	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	557	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	558	ELSEIF ( ibc_pt_b == 2 ) THEN
	559	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	560	ENDIF
	561	IF ( ibc_pt_t == 0 ) THEN
[19]	562	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	563	ELSEIF( ibc_pt_t == 1 ) THEN
	564	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	565	ELSEIF( ibc_pt_t == 2 ) THEN
	566	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	567	ENDIF
	568
	569	WRITE ( io, 300 ) runten, roben
	570
	571	IF ( .NOT. constant_diffusion ) THEN
	572	IF ( ibc_e_b == 1 ) THEN
	573	runten = 'e(0) = e(1)'
	574	ELSE
	575	runten = 'e(0) = e(1) = (u/0.1)*2'
	576	ENDIF
	577	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	578
[97]	579	WRITE ( io, 301 ) 'e', runten, roben
[1]	580
	581	ENDIF
	582
[97]	583	IF ( ocean ) THEN
	584	runten = 'sa(0) = sa(1)'
	585	IF ( ibc_sa_t == 0 ) THEN
	586	roben = 'sa(nzt+1) = sa_surface'
[1]	587	ELSE
[97]	588	roben = 'sa(nzt+1) = sa(nzt)'
[1]	589	ENDIF
[97]	590	WRITE ( io, 301 ) 'sa', runten, roben
	591	ENDIF
[1]	592
[97]	593	IF ( humidity ) THEN
	594	IF ( ibc_q_b == 0 ) THEN
	595	runten = 'q(0) = q_surface'
	596	ELSE
	597	runten = 'q(0) = q(1)'
	598	ENDIF
	599	IF ( ibc_q_t == 0 ) THEN
	600	roben = 'q(nzt) = q_top'
	601	ELSE
	602	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	603	ENDIF
	604	WRITE ( io, 301 ) 'q', runten, roben
	605	ENDIF
[1]	606
[97]	607	IF ( passive_scalar ) THEN
	608	IF ( ibc_q_b == 0 ) THEN
	609	runten = 's(0) = s_surface'
	610	ELSE
	611	runten = 's(0) = s(1)'
	612	ENDIF
	613	IF ( ibc_q_t == 0 ) THEN
	614	roben = 's(nzt) = s_top'
	615	ELSE
	616	roben = 's(nzt) = s(nzt-1) + ds/dz'
	617	ENDIF
	618	WRITE ( io, 301 ) 's', runten, roben
[1]	619	ENDIF
	620
	621	IF ( use_surface_fluxes ) THEN
	622	WRITE ( io, 303 )
	623	IF ( constant_heatflux ) THEN
	624	WRITE ( io, 306 ) surface_heatflux
	625	IF ( random_heatflux ) WRITE ( io, 307 )
	626	ENDIF
[75]	627	IF ( humidity .AND. constant_waterflux ) THEN
[1]	628	WRITE ( io, 311 ) surface_waterflux
	629	ENDIF
	630	IF ( passive_scalar .AND. constant_waterflux ) THEN
	631	WRITE ( io, 313 ) surface_waterflux
	632	ENDIF
	633	ENDIF
	634
[19]	635	IF ( use_top_fluxes ) THEN
	636	WRITE ( io, 304 )
[102]	637	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	638	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	639	IF ( constant_top_heatflux ) THEN
	640	WRITE ( io, 306 ) top_heatflux
	641	ENDIF
	642	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	643	WRITE ( io, 316 )
[19]	644	ENDIF
[97]	645	IF ( ocean .AND. constant_top_salinityflux ) THEN
	646	WRITE ( io, 309 ) top_salinityflux
	647	ENDIF
[75]	648	IF ( humidity .OR. passive_scalar ) THEN
[19]	649	WRITE ( io, 315 )
	650	ENDIF
	651	ENDIF
	652
[1]	653	IF ( prandtl_layer ) THEN
[94]	654	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	655	rif_min, rif_max
[1]	656	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	657	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	658	WRITE ( io, 312 )
	659	ENDIF
	660	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	661	WRITE ( io, 314 )
	662	ENDIF
	663	ELSE
	664	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	665	WRITE ( io, 310 ) rif_min, rif_max
	666	ENDIF
	667	ENDIF
	668
	669	WRITE ( io, 317 ) bc_lr, bc_ns
	670	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	671	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	672	IF ( turbulent_inflow ) THEN
	673	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	674	inflow_damping_height, inflow_damping_width
	675	ENDIF
[1]	676	ENDIF
	677
	678	!
	679	!-- Listing of 1D-profiles
[151]	680	WRITE ( io, 325 ) dt_dopr_listing
[1]	681	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	682	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	683	ENDIF
	684
	685	!
	686	!-- DATA output
	687	WRITE ( io, 330 )
	688	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	689	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	690	ENDIF
	691
	692	!
	693	!-- 1D-profiles
[346]	694	dopr_chr = 'Profile:'
[1]	695	IF ( dopr_n /= 0 ) THEN
	696	WRITE ( io, 331 )
	697
	698	output_format = ''
	699	IF ( netcdf_output ) THEN
	700	IF ( netcdf_64bit ) THEN
	701	output_format = 'netcdf (64 bit offset)'
	702	ELSE
	703	output_format = 'netcdf'
	704	ENDIF
	705	ENDIF
	706	IF ( profil_output ) THEN
	707	IF ( netcdf_output ) THEN
	708	output_format = TRIM( output_format ) // ' and profil'
	709	ELSE
	710	output_format = 'profil'
	711	ENDIF
	712	ENDIF
[292]	713	WRITE ( io, 344 ) output_format
[1]	714
	715	DO i = 1, dopr_n
	716	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	717	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	718	WRITE ( io, 332 ) dopr_chr
	719	dopr_chr = ' :'
	720	ENDIF
	721	ENDDO
	722
	723	IF ( dopr_chr /= '' ) THEN
	724	WRITE ( io, 332 ) dopr_chr
	725	ENDIF
	726	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	727	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	728	ENDIF
	729
	730	!
	731	!-- 2D-arrays
	732	DO av = 0, 1
	733
	734	i = 1
	735	do2d_xy = ''
	736	do2d_xz = ''
	737	do2d_yz = ''
	738	DO WHILE ( do2d(av,i) /= ' ' )
	739
	740	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	741	do2d_mode = do2d(av,i)(l-1:l)
	742
	743	SELECT CASE ( do2d_mode )
	744	CASE ( 'xy' )
	745	ll = LEN_TRIM( do2d_xy )
	746	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	747	CASE ( 'xz' )
	748	ll = LEN_TRIM( do2d_xz )
	749	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	750	CASE ( 'yz' )
	751	ll = LEN_TRIM( do2d_yz )
	752	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	753	END SELECT
	754
	755	i = i + 1
	756
	757	ENDDO
	758
	759	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	760	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	761	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	762	( netcdf_output .OR. iso2d_output ) ) THEN
	763
	764	IF ( av == 0 ) THEN
	765	WRITE ( io, 334 ) ''
	766	ELSE
	767	WRITE ( io, 334 ) '(time-averaged)'
	768	ENDIF
	769
	770	IF ( do2d_at_begin ) THEN
	771	begin_chr = 'and at the start'
	772	ELSE
	773	begin_chr = ''
	774	ENDIF
	775
	776	output_format = ''
	777	IF ( netcdf_output ) THEN
	778	IF ( netcdf_64bit ) THEN
	779	output_format = 'netcdf (64 bit offset)'
	780	ELSE
	781	output_format = 'netcdf'
	782	ENDIF
	783	ENDIF
	784	IF ( iso2d_output ) THEN
	785	IF ( netcdf_output ) THEN
	786	output_format = TRIM( output_format ) // ' and iso2d'
	787	ELSE
	788	output_format = 'iso2d'
	789	ENDIF
	790	ENDIF
[292]	791	WRITE ( io, 344 ) output_format
[1]	792
	793	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	794	i = 1
	795	slices = '/'
	796	coordinates = '/'
	797	!
	798	!-- Building strings with index and coordinate informations of the
	799	!-- slices
	800	DO WHILE ( section(i,1) /= -9999 )
	801
	802	WRITE (section_chr,'(I5)') section(i,1)
	803	section_chr = ADJUSTL( section_chr )
	804	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	805
[206]	806	IF ( section(i,1) == -1 ) THEN
	807	WRITE (coor_chr,'(F10.1)') -1.0
	808	ELSE
	809	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	810	ENDIF
[1]	811	coor_chr = ADJUSTL( coor_chr )
	812	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	813
	814	i = i + 1
	815	ENDDO
	816	IF ( av == 0 ) THEN
	817	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	818	TRIM( begin_chr ), 'k', TRIM( slices ), &
	819	TRIM( coordinates )
	820	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	821	WRITE ( io, 339 ) skip_time_do2d_xy
	822	ENDIF
	823	ELSE
	824	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	825	TRIM( begin_chr ), averaging_interval, &
	826	dt_averaging_input, 'k', TRIM( slices ), &
	827	TRIM( coordinates )
	828	IF ( skip_time_data_output_av /= 0.0 ) THEN
	829	WRITE ( io, 339 ) skip_time_data_output_av
	830	ENDIF
	831	ENDIF
	832
	833	ENDIF
	834
	835	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	836	i = 1
	837	slices = '/'
	838	coordinates = '/'
	839	!
	840	!-- Building strings with index and coordinate informations of the
	841	!-- slices
	842	DO WHILE ( section(i,2) /= -9999 )
	843
	844	WRITE (section_chr,'(I5)') section(i,2)
	845	section_chr = ADJUSTL( section_chr )
	846	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	847
	848	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	849	coor_chr = ADJUSTL( coor_chr )
	850	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	851
	852	i = i + 1
	853	ENDDO
	854	IF ( av == 0 ) THEN
	855	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	856	TRIM( begin_chr ), 'j', TRIM( slices ), &
	857	TRIM( coordinates )
	858	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	859	WRITE ( io, 339 ) skip_time_do2d_xz
	860	ENDIF
	861	ELSE
	862	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	863	TRIM( begin_chr ), averaging_interval, &
	864	dt_averaging_input, 'j', TRIM( slices ), &
	865	TRIM( coordinates )
	866	IF ( skip_time_data_output_av /= 0.0 ) THEN
	867	WRITE ( io, 339 ) skip_time_data_output_av
	868	ENDIF
	869	ENDIF
	870	ENDIF
	871
	872	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	873	i = 1
	874	slices = '/'
	875	coordinates = '/'
	876	!
	877	!-- Building strings with index and coordinate informations of the
	878	!-- slices
	879	DO WHILE ( section(i,3) /= -9999 )
	880
	881	WRITE (section_chr,'(I5)') section(i,3)
	882	section_chr = ADJUSTL( section_chr )
	883	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	884
	885	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	886	coor_chr = ADJUSTL( coor_chr )
	887	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	888
	889	i = i + 1
	890	ENDDO
	891	IF ( av == 0 ) THEN
	892	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	893	TRIM( begin_chr ), 'i', TRIM( slices ), &
	894	TRIM( coordinates )
	895	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	896	WRITE ( io, 339 ) skip_time_do2d_yz
	897	ENDIF
	898	ELSE
	899	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	900	TRIM( begin_chr ), averaging_interval, &
	901	dt_averaging_input, 'i', TRIM( slices ), &
	902	TRIM( coordinates )
	903	IF ( skip_time_data_output_av /= 0.0 ) THEN
	904	WRITE ( io, 339 ) skip_time_data_output_av
	905	ENDIF
	906	ENDIF
	907	ENDIF
	908
	909	ENDIF
	910
	911	ENDDO
	912
	913	!
	914	!-- 3d-arrays
	915	DO av = 0, 1
	916
	917	i = 1
	918	do3d_chr = ''
	919	DO WHILE ( do3d(av,i) /= ' ' )
	920
	921	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	922	i = i + 1
	923
	924	ENDDO
	925
	926	IF ( do3d_chr /= '' ) THEN
	927	IF ( av == 0 ) THEN
	928	WRITE ( io, 336 ) ''
	929	ELSE
	930	WRITE ( io, 336 ) '(time-averaged)'
	931	ENDIF
	932
	933	output_format = ''
	934	IF ( netcdf_output ) THEN
[292]	935	IF ( netcdf_64bit_3d ) THEN
[1]	936	output_format = 'netcdf (64 bit offset)'
	937	ELSE
	938	output_format = 'netcdf'
	939	ENDIF
	940	ENDIF
	941	IF ( avs_output ) THEN
	942	IF ( netcdf_output ) THEN
	943	output_format = TRIM( output_format ) // ' and avs'
	944	ELSE
	945	output_format = 'avs'
	946	ENDIF
	947	ENDIF
[292]	948	WRITE ( io, 344 ) output_format
[1]	949
	950	IF ( do3d_at_begin ) THEN
	951	begin_chr = 'and at the start'
	952	ELSE
	953	begin_chr = ''
	954	ENDIF
	955	IF ( av == 0 ) THEN
	956	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	957	zu(nz_do3d), nz_do3d
	958	ELSE
	959	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	960	TRIM( begin_chr ), averaging_interval, &
	961	dt_averaging_input, zu(nz_do3d), nz_do3d
	962	ENDIF
	963
	964	IF ( do3d_compress ) THEN
	965	do3d_chr = ''
	966	i = 1
	967	DO WHILE ( do3d(av,i) /= ' ' )
	968
	969	SELECT CASE ( do3d(av,i) )
	970	CASE ( 'u' )
	971	j = 1
	972	CASE ( 'v' )
	973	j = 2
	974	CASE ( 'w' )
	975	j = 3
	976	CASE ( 'p' )
	977	j = 4
	978	CASE ( 'pt' )
	979	j = 5
	980	END SELECT
	981	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	982	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	983	':' // prec // ','
	984	i = i + 1
	985
	986	ENDDO
	987	WRITE ( io, 338 ) do3d_chr
	988
	989	ENDIF
	990
	991	IF ( av == 0 ) THEN
	992	IF ( skip_time_do3d /= 0.0 ) THEN
	993	WRITE ( io, 339 ) skip_time_do3d
	994	ENDIF
	995	ELSE
	996	IF ( skip_time_data_output_av /= 0.0 ) THEN
	997	WRITE ( io, 339 ) skip_time_data_output_av
	998	ENDIF
	999	ENDIF
	1000
	1001	ENDIF
	1002
	1003	ENDDO
	1004
	1005	!
[410]	1006	!-- masked arrays
	1007	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1008	mask_scale_x, mask_scale_y, mask_scale_z
	1009	DO mid = 1, masks
	1010	DO av = 0, 1
	1011
	1012	i = 1
	1013	domask_chr = ''
	1014	DO WHILE ( domask(mid,av,i) /= ' ' )
	1015	domask_chr = TRIM( domask_chr ) // ' ' // &
	1016	TRIM( domask(mid,av,i) ) // ','
	1017	i = i + 1
	1018	ENDDO
	1019
	1020	IF ( domask_chr /= '' ) THEN
	1021	IF ( av == 0 ) THEN
	1022	WRITE ( io, 346 ) '', mid
	1023	ELSE
	1024	WRITE ( io, 346 ) ' (time-averaged)', mid
	1025	ENDIF
	1026
	1027	output_format = ''
	1028	IF ( netcdf_output ) THEN
	1029	SELECT CASE ( nc_format_mask(mid,av) )
	1030	CASE ( 1 )
	1031	output_format = 'netcdf (classic format)'
	1032	CASE ( 2 )
	1033	output_format = 'netcdf (64bit offset format)'
	1034	CASE ( 3 )
	1035	output_format = 'netcdf (NetCDF 4 format)'
	1036	CASE ( 4 )
	1037	output_format = 'netcdf (NetCDF 4 classic model format)'
	1038	END SELECT
	1039	ENDIF
	1040	WRITE ( io, 344 ) output_format
	1041
	1042	IF ( av == 0 ) THEN
	1043	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1044	ELSE
	1045	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1046	averaging_interval, dt_averaging_input
	1047	ENDIF
	1048
	1049	IF ( av == 0 ) THEN
	1050	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1051	WRITE ( io, 339 ) skip_time_domask(mid)
	1052	ENDIF
	1053	ELSE
	1054	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1055	WRITE ( io, 339 ) skip_time_data_output_av
	1056	ENDIF
	1057	ENDIF
	1058	!
	1059	!-- output locations
	1060	DO dim = 1, 3
	1061	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1062	count = 0
	1063	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1064	count = count + 1
	1065	ENDDO
	1066	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1067	mask(mid,dim,:count)
	1068	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1069	mask_loop(mid,dim,2) < 0.0 .AND. &
	1070	mask_loop(mid,dim,3) == 0.0 ) THEN
	1071	WRITE ( io, 350 ) dir(dim), dir(dim)
	1072	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1073	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1074	mask_loop(mid,dim,1:2)
	1075	ELSE
	1076	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1077	mask_loop(mid,dim,1:3)
	1078	ENDIF
	1079	ENDDO
	1080	ENDIF
	1081
	1082	ENDDO
	1083	ENDDO
	1084
	1085	!
[1]	1086	!-- Timeseries
	1087	IF ( dt_dots /= 9999999.9 ) THEN
	1088	WRITE ( io, 340 )
	1089
	1090	output_format = ''
	1091	IF ( netcdf_output ) THEN
	1092	IF ( netcdf_64bit ) THEN
	1093	output_format = 'netcdf (64 bit offset)'
	1094	ELSE
	1095	output_format = 'netcdf'
	1096	ENDIF
	1097	ENDIF
	1098	IF ( profil_output ) THEN
	1099	IF ( netcdf_output ) THEN
	1100	output_format = TRIM( output_format ) // ' and profil'
	1101	ELSE
	1102	output_format = 'profil'
	1103	ENDIF
	1104	ENDIF
[292]	1105	WRITE ( io, 344 ) output_format
[1]	1106	WRITE ( io, 341 ) dt_dots
	1107	ENDIF
	1108
	1109	#if defined( __dvrp_graphics )
	1110	!
	1111	!-- Dvrp-output
	1112	IF ( dt_dvrp /= 9999999.9 ) THEN
	1113	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1114	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1115	i = 1
	1116	l = 0
[336]	1117	m = 0
[1]	1118	DO WHILE ( mode_dvrp(i) /= ' ' )
	1119	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1120	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1121	l = l + 1
	1122	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1123	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1124	isosurface_color(:,l)
[1]	1125	ENDIF
	1126	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1127	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1128	m = m + 1
	1129	IF ( do2d(0,j) /= ' ' ) THEN
	1130	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1131	slicer_range_limits_dvrp(:,m)
	1132	ENDIF
[1]	1133	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1134	WRITE ( io, 363 ) dvrp_psize
	1135	IF ( particle_dvrpsize /= 'none' ) THEN
	1136	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1137	dvrpsize_interval
	1138	ENDIF
	1139	IF ( particle_color /= 'none' ) THEN
	1140	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1141	color_interval
	1142	ENDIF
[1]	1143	ENDIF
	1144	i = i + 1
	1145	ENDDO
[237]	1146
[336]	1147	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1148	superelevation_y, superelevation, clip_dvrp_l, &
	1149	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1150
	1151	IF ( TRIM( topography ) /= 'flat' ) THEN
	1152	WRITE ( io, 366 ) topography_color
	1153	IF ( cluster_size > 1 ) THEN
	1154	WRITE ( io, 367 ) cluster_size
	1155	ENDIF
[237]	1156	ENDIF
	1157
[1]	1158	ENDIF
	1159	#endif
	1160
	1161	#if defined( __spectra )
	1162	!
	1163	!-- Spectra output
	1164	IF ( dt_dosp /= 9999999.9 ) THEN
	1165	WRITE ( io, 370 )
	1166
	1167	output_format = ''
	1168	IF ( netcdf_output ) THEN
	1169	IF ( netcdf_64bit ) THEN
	1170	output_format = 'netcdf (64 bit offset)'
	1171	ELSE
	1172	output_format = 'netcdf'
	1173	ENDIF
	1174	ENDIF
	1175	IF ( profil_output ) THEN
	1176	IF ( netcdf_output ) THEN
	1177	output_format = TRIM( output_format ) // ' and profil'
	1178	ELSE
	1179	output_format = 'profil'
	1180	ENDIF
	1181	ENDIF
[292]	1182	WRITE ( io, 344 ) output_format
[1]	1183	WRITE ( io, 371 ) dt_dosp
	1184	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1185	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1186	( spectra_direction(i), i = 1,10 ), &
[189]	1187	( comp_spectra_level(i), i = 1,100 ), &
	1188	( plot_spectra_level(i), i = 1,100 ), &
[1]	1189	averaging_interval_sp, dt_averaging_input_pr
	1190	ENDIF
	1191	#endif
	1192
	1193	WRITE ( io, 99 )
	1194
	1195	!
	1196	!-- Physical quantities
	1197	WRITE ( io, 400 )
	1198
	1199	!
	1200	!-- Geostrophic parameters
	1201	WRITE ( io, 410 ) omega, phi, f, fs
	1202
	1203	!
	1204	!-- Other quantities
	1205	WRITE ( io, 411 ) g
[97]	1206	IF ( use_reference ) THEN
	1207	IF ( ocean ) THEN
	1208	WRITE ( io, 412 ) prho_reference
	1209	ELSE
	1210	WRITE ( io, 413 ) pt_reference
	1211	ENDIF
	1212	ENDIF
[1]	1213
	1214	!
	1215	!-- Cloud physics parameters
	1216	IF ( cloud_physics ) THEN
[57]	1217	WRITE ( io, 415 )
	1218	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1219	ENDIF
	1220
	1221	!-- Profile of the geostrophic wind (component ug)
	1222	!-- Building output strings
	1223	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1224	gradients = '------'
	1225	slices = ' 0'
	1226	coordinates = ' 0.0'
	1227	i = 1
	1228	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1229
[167]	1230	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1231	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1232
[167]	1233	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1234	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1235
[167]	1236	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1237	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1238
[167]	1239	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1240	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1241
	1242	i = i + 1
	1243	ENDDO
	1244
	1245	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1246	TRIM( gradients ), TRIM( slices )
	1247
	1248	!-- Profile of the geostrophic wind (component vg)
	1249	!-- Building output strings
	1250	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1251	gradients = '------'
	1252	slices = ' 0'
	1253	coordinates = ' 0.0'
	1254	i = 1
	1255	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1256
[167]	1257	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1258	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1259
[167]	1260	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1261	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1262
[167]	1263	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1264	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1265
[167]	1266	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1267	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1268
	1269	i = i + 1
	1270	ENDDO
	1271
	1272	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1273	TRIM( gradients ), TRIM( slices )
	1274
	1275	!
	1276	!-- Initial temperature profile
	1277	!-- Building output strings, starting with surface temperature
	1278	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1279	gradients = '------'
	1280	slices = ' 0'
	1281	coordinates = ' 0.0'
	1282	i = 1
	1283	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1284
[94]	1285	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1286	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1287
[94]	1288	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1289	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1290
[94]	1291	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1292	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1293
[94]	1294	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1295	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1296
	1297	i = i + 1
	1298	ENDDO
	1299
	1300	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1301	TRIM( gradients ), TRIM( slices )
	1302
	1303	!
	1304	!-- Initial humidity profile
	1305	!-- Building output strings, starting with surface humidity
[75]	1306	IF ( humidity .OR. passive_scalar ) THEN
[1]	1307	WRITE ( temperatures, '(E8.1)' ) q_surface
	1308	gradients = '--------'
	1309	slices = ' 0'
	1310	coordinates = ' 0.0'
	1311	i = 1
	1312	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1313
	1314	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1315	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1316
	1317	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1318	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1319
	1320	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1321	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1322
	1323	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1324	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1325
	1326	i = i + 1
	1327	ENDDO
	1328
[75]	1329	IF ( humidity ) THEN
[1]	1330	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1331	TRIM( gradients ), TRIM( slices )
	1332	ELSE
	1333	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1334	TRIM( gradients ), TRIM( slices )
	1335	ENDIF
	1336	ENDIF
	1337
	1338	!
[97]	1339	!-- Initial salinity profile
	1340	!-- Building output strings, starting with surface salinity
	1341	IF ( ocean ) THEN
	1342	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1343	gradients = '------'
	1344	slices = ' 0'
	1345	coordinates = ' 0.0'
	1346	i = 1
	1347	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1348
	1349	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1350	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1351
	1352	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1353	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1354
	1355	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1356	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1357
	1358	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1359	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1360
	1361	i = i + 1
	1362	ENDDO
	1363
	1364	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1365	TRIM( gradients ), TRIM( slices )
	1366	ENDIF
	1367
	1368	!
[411]	1369	!-- Profile for the large scale vertial velocity
	1370	!-- Building output strings, starting with surface value
	1371	IF ( large_scale_subsidence ) THEN
	1372	temperatures = ' 0.0'
	1373	gradients = '------'
	1374	slices = ' 0'
	1375	coordinates = ' 0.0'
	1376	i = 1
	1377	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
	1378
	1379	WRITE (coor_chr,'(E10.2,7X)') &
	1380	w_subs(ws_vertical_gradient_level_ind(i))
	1381	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1382
	1383	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
	1384	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1385
	1386	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
	1387	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1388
	1389	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
	1390	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1391
	1392	i = i + 1
	1393	ENDDO
	1394
	1395	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1396	TRIM( gradients ), TRIM( slices )
	1397	ENDIF
	1398
	1399	!
[1]	1400	!-- LES / turbulence parameters
	1401	WRITE ( io, 450 )
	1402
	1403	!--
	1404	! ... LES-constants used must still be added here
	1405	!--
	1406	IF ( constant_diffusion ) THEN
	1407	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1408	prandtl_number
	1409	ENDIF
	1410	IF ( .NOT. constant_diffusion) THEN
[108]	1411	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1412	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1413	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1414	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1415	ENDIF
	1416
	1417	!
	1418	!-- Special actions during the run
	1419	WRITE ( io, 470 )
	1420	IF ( create_disturbances ) THEN
	1421	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1422	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1423	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1424	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1425	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1426	ELSE
	1427	WRITE ( io, 473 ) disturbance_energy_limit
	1428	ENDIF
	1429	WRITE ( io, 474 ) TRIM( random_generator )
	1430	ENDIF
	1431	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1432	WRITE ( io, 475 ) pt_surface_initial_change
	1433	ENDIF
[75]	1434	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1435	WRITE ( io, 476 ) q_surface_initial_change
	1436	ENDIF
	1437	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1438	WRITE ( io, 477 ) q_surface_initial_change
	1439	ENDIF
	1440
[60]	1441	IF ( particle_advection ) THEN
[1]	1442	!
[60]	1443	!-- Particle attributes
	1444	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1445	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1446	end_time_prel, dt_sort_particles
[60]	1447	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1448	IF ( random_start_position ) WRITE ( io, 481 )
	1449	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1450	WRITE ( io, 495 ) total_number_of_particles
	1451	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1452	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1453	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1454	WRITE ( io, 484 ) total_number_of_tails, &
	1455	minimum_tailpoint_distance, &
	1456	maximum_tailpoint_age
	1457	ENDIF
[1]	1458	ENDIF
[60]	1459	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1460	WRITE ( io, 485 ) dt_write_particle_data
	1461	output_format = ''
	1462	IF ( netcdf_output ) THEN
	1463	IF ( netcdf_64bit ) THEN
	1464	output_format = 'netcdf (64 bit offset) and binary'
	1465	ELSE
	1466	output_format = 'netcdf and binary'
	1467	ENDIF
[1]	1468	ELSE
[60]	1469	output_format = 'binary'
[1]	1470	ENDIF
[292]	1471	WRITE ( io, 344 ) output_format
[1]	1472	ENDIF
[60]	1473	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1474	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1475
[60]	1476	WRITE ( io, 487 ) number_of_particle_groups
[1]	1477
[60]	1478	DO i = 1, number_of_particle_groups
	1479	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1480	WRITE ( io, 490 ) i, 0.0
	1481	WRITE ( io, 492 )
[1]	1482	ELSE
[60]	1483	WRITE ( io, 490 ) i, radius(i)
	1484	IF ( density_ratio(i) /= 0.0 ) THEN
	1485	WRITE ( io, 491 ) density_ratio(i)
	1486	ELSE
	1487	WRITE ( io, 492 )
	1488	ENDIF
[1]	1489	ENDIF
[60]	1490	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1491	pdx(i), pdy(i), pdz(i)
[336]	1492	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1493	ENDDO
[1]	1494
[60]	1495	ENDIF
[1]	1496
[60]	1497
[1]	1498	!
	1499	!-- Parameters of 1D-model
	1500	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1501	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1502	mixing_length_1d, dissipation_1d
	1503	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1504	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1505	ENDIF
	1506	ENDIF
	1507
	1508	!
	1509	!-- User-defined informations
	1510	CALL user_header( io )
	1511
	1512	WRITE ( io, 99 )
	1513
	1514	!
	1515	!-- Write buffer contents to disc immediately
[82]	1516	CALL local_flush( io )
[1]	1517
	1518	!
	1519	!-- Here the FORMATs start
	1520
	1521	99 FORMAT (1X,78('-'))
[200]	1522	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1523	1X,'* ',A,' *',9X,A/ &
	1524	1X,'***************************',9X,42('-'))
[291]	1525	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1526	37X,42('-'))
[200]	1527	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1528	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1529	' Run on host: ',A10)
[1]	1530	#if defined( __parallel )
[200]	1531	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1532	')',1X,A)
[200]	1533	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1534	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1535	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1536	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1537	37X,'because the job is running on an SMP-cluster')
[102]	1538	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1539	#endif
	1540	110 FORMAT (/' Numerical Schemes:'/ &
	1541	' -----------------'/)
	1542	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1543	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1544	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1545	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1546	' or Upstream')
	1547	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1548	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1549	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1550	' or Upstream')
	1551	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1552	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1553	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1554	' Translation velocity = ',A/ &
	1555	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1556	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1557	' of timestep changes)')
	1558	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1559	' timestep changes')
	1560	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1561	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1562	' maximum damping coefficient: ',F5.3, ' 1/s')
	1563	124 FORMAT (' Spline-overshoots are being suppressed')
	1564	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1565	' of'/ &
	1566	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1567	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1568	' of'/ &
	1569	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1570	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1571	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1572	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1573	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1574	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1575	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1576	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1577	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1578	' effective emissivity scheme')
	1579	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1580	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1581	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1582	A,'-cycle)'/ &
	1583	' number of grid levels: ',I2/ &
	1584	' Gauss-Seidel red/black iterations: ',I2)
	1585	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1586	I3,')')
	1587	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1588	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1589	I3,')'/ &
	1590	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1591	I3,')')
	1592	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1593	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1594	140 FORMAT (' maximum residual allowed: ',E10.3)
	1595	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1596	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1597	'step')
[87]	1598	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1599	'kinetic energy')
[1]	1600	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1601	'conserved'/ &
	1602	' using the ',A,' mode')
	1603	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1604	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1605	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1606	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1607	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1608	'prognostic equation for')
	1609	154 FORMAT (' the potential temperature')
[1]	1610	200 FORMAT (//' Run time and time step information:'/ &
	1611	' ----------------------------------'/)
	1612	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1613	' CFL-factor: ',F4.2)
	1614	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1615	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1616	' End time: ',F9.3,' s')
	1617	204 FORMAT ( A,F9.3,' s')
	1618	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1619	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1620	' CPU-time used: ',F9.3,' s per timestep: ', &
	1621	' ',F9.3,' s'/ &
	1622	' per second of simulated tim', &
	1623	'e: ',F9.3,' s')
[291]	1624	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1625	250 FORMAT (//' Computational grid and domain size:'/ &
	1626	' ----------------------------------'// &
	1627	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1628	' m dz = ',F7.3,' m'/ &
	1629	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1630	' m z(u) = ',F10.3,' m'/)
	1631	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1632	' factor: ',F5.3/ &
	1633	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1634	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1635	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1636	255 FORMAT (' Subdomains have equal size')
	1637	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1638	'have smaller sizes'/ &
	1639	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1640	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1641	' degrees')
	1642	270 FORMAT (//' Topography informations:'/ &
	1643	' -----------------------'// &
	1644	1X,'Topography: ',A)
	1645	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1646	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1647	' / ',I4)
[240]	1648	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1649	' direction' / &
	1650	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1651	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1652	278 FORMAT (' Topography grid definition convention:'/ &
	1653	' cell edge (staggered grid points'/ &
	1654	' (u in x-direction, v in y-direction))' /)
	1655	279 FORMAT (' Topography grid definition convention:'/ &
	1656	' cell center (scalar grid points)' /)
[138]	1657	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1658	' ------------------------------'// &
	1659	' Canopy mode: ', A / &
	1660	' Canopy top: ',I4 / &
	1661	' Leaf drag coefficient: ',F6.2 /)
[153]	1662	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1663	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1664	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1665	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1666	' Height: ',A,' m'/ &
	1667	' Leaf area density: ',A,' m2/m3'/ &
	1668	' Gradient: ',A,' m2/m4'/ &
	1669	' Gridpoint: ',A)
	1670
[1]	1671	300 FORMAT (//' Boundary conditions:'/ &
	1672	' -------------------'// &
	1673	' p uv ', &
	1674	' pt'// &
	1675	' B. bound.: ',A/ &
	1676	' T. bound.: ',A)
[97]	1677	301 FORMAT (/' ',A// &
[1]	1678	' B. bound.: ',A/ &
	1679	' T. bound.: ',A)
[19]	1680	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1681	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1682	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1683	'computational u,v-level:'// &
[1]	1684	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1685	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1686	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1687	307 FORMAT (' Heatflux has a random normal distribution')
	1688	308 FORMAT (' Predefined surface temperature')
[97]	1689	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1690	310 FORMAT (//' 1D-Model:'// &
	1691	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1692	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1693	312 FORMAT (' Predefined surface humidity')
	1694	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1695	314 FORMAT (' Predefined scalar value at the surface')
[19]	1696	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1697	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1698	'atmosphere model')
[1]	1699	317 FORMAT (//' Lateral boundaries:'/ &
	1700	' left/right: ',A/ &
	1701	' north/south: ',A)
	1702	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1703	'max =',F5.1,' m**2/s')
[151]	1704	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1705	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1706	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1707	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1708	' v: ',F9.6,' m2/s2')
[151]	1709	325 FORMAT (//' List output:'/ &
[1]	1710	' -----------'// &
	1711	' 1D-Profiles:'/ &
	1712	' Output every ',F8.2,' s')
[151]	1713	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1714	' Averaging input every ',F8.2,' s')
	1715	330 FORMAT (//' Data output:'/ &
	1716	' -----------'/)
	1717	331 FORMAT (/' 1D-Profiles:')
	1718	332 FORMAT (/' ',A)
	1719	333 FORMAT (' Output every ',F8.2,' s',/ &
	1720	' Time averaged over ',F8.2,' s'/ &
	1721	' Averaging input every ',F8.2,' s')
	1722	334 FORMAT (/' 2D-Arrays',A,':')
	1723	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1724	' Output every ',F8.2,' s ',A/ &
	1725	' Cross sections at ',A1,' = ',A/ &
	1726	' scalar-coordinates: ',A,' m'/)
	1727	336 FORMAT (/' 3D-Arrays',A,':')
	1728	337 FORMAT (/' Arrays: ',A/ &
	1729	' Output every ',F8.2,' s ',A/ &
	1730	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1731	338 FORMAT (' Compressed data output'/ &
	1732	' Decimal precision: ',A/)
	1733	339 FORMAT (' No output during initial ',F8.2,' s')
	1734	340 FORMAT (/' Time series:')
	1735	341 FORMAT (' Output every ',F8.2,' s'/)
	1736	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1737	' Output every ',F8.2,' s ',A/ &
	1738	' Time averaged over ',F8.2,' s'/ &
	1739	' Averaging input every ',F8.2,' s'/ &
	1740	' Cross sections at ',A1,' = ',A/ &
	1741	' scalar-coordinates: ',A,' m'/)
	1742	343 FORMAT (/' Arrays: ',A/ &
	1743	' Output every ',F8.2,' s ',A/ &
	1744	' Time averaged over ',F8.2,' s'/ &
	1745	' Averaging input every ',F8.2,' s'/ &
	1746	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1747	344 FORMAT (' Output format: ',A/)
[410]	1748	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1749	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1750	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1751	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1752	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1753	347 FORMAT (' Variables: ',A/ &
	1754	' Output every ',F8.2,' s')
	1755	348 FORMAT (' Variables: ',A/ &
	1756	' Output every ',F8.2,' s'/ &
	1757	' Time averaged over ',F8.2,' s'/ &
	1758	' Averaging input every ',F8.2,' s')
	1759	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1760	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1761	13(' ',8(F8.2,',')/) )
	1762	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1763	'all gridpoints along ',A,'-direction (default).' )
	1764	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1765	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1766	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1767	#if defined( __dvrp_graphics )
	1768	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1769	' Output every ',F7.1,' s'/ &
	1770	' Output mode: ',A/ &
	1771	' Host / User: ',A,' / ',A/ &
	1772	' Directory: ',A// &
	1773	' The sequence contains:')
[337]	1774	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1775	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1776	362 FORMAT (/' Slicer plane ',A/ &
[336]	1777	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1778	363 FORMAT (/' Particles'/ &
[336]	1779	' particle size: ',F7.2,' m')
	1780	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1781	F6.2,',',F6.2,']')
[337]	1782	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1783	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1784	')'/ &
	1785	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1786	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1787	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1788	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1789	#endif
	1790	#if defined( __spectra )
	1791	370 FORMAT (' Spectra:')
	1792	371 FORMAT (' Output every ',F7.1,' s'/)
	1793	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1794	' Directions: ', 10(A5,',')/ &
[189]	1795	' height levels k = ', 20(I3,',')/ &
	1796	' ', 20(I3,',')/ &
	1797	' ', 20(I3,',')/ &
	1798	' ', 20(I3,',')/ &
	1799	' ', 19(I3,','),I3,'.'/ &
[1]	1800	' height levels selected for standard plot:'/ &
[189]	1801	' k = ', 20(I3,',')/ &
	1802	' ', 20(I3,',')/ &
	1803	' ', 20(I3,',')/ &
	1804	' ', 20(I3,',')/ &
	1805	' ', 19(I3,','),I3,'.'/ &
[1]	1806	' Time averaged over ', F7.1, ' s,' / &
	1807	' Profiles for the time averaging are taken every ', &
	1808	F6.1,' s')
	1809	#endif
	1810	400 FORMAT (//' Physical quantities:'/ &
	1811	' -------------------'/)
	1812	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1813	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1814	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1815	' f* = ',F9.6,' 1/s')
	1816	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1817	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1818	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1819	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1820	' ------------------------'/)
[57]	1821	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1822	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1823	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1824	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1825	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1826	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1827	' Height: ',A,' m'/ &
	1828	' Temperature: ',A,' K'/ &
	1829	' Gradient: ',A,' K/100m'/ &
	1830	' Gridpoint: ',A)
	1831	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1832	' Height: ',A,' m'/ &
	1833	' Humidity: ',A,' kg/kg'/ &
	1834	' Gradient: ',A,' (kg/kg)/100m'/ &
	1835	' Gridpoint: ',A)
	1836	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1837	' Height: ',A,' m'/ &
	1838	' Scalar concentration: ',A,' kg/m**3'/ &
	1839	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1840	' Gridpoint: ',A)
	1841	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1842	' Height: ',A,' m'/ &
	1843	' ug: ',A,' m/s'/ &
	1844	' Gradient: ',A,' 1/100s'/ &
	1845	' Gridpoint: ',A)
	1846	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1847	' Height: ',A,' m'/ &
[97]	1848	' vg: ',A,' m/s'/ &
[1]	1849	' Gradient: ',A,' 1/100s'/ &
	1850	' Gridpoint: ',A)
[97]	1851	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1852	' Height: ',A,' m'/ &
	1853	' Salinity: ',A,' psu'/ &
	1854	' Gradient: ',A,' psu/100m'/ &
	1855	' Gridpoint: ',A)
[411]	1856	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1857	' Height: ',A,' m'/ &
	1858	' w_subs: ',A,' m/s'/ &
	1859	' Gradient: ',A,' (m/s)/100m'/ &
	1860	' Gridpoint: ',A)
[1]	1861	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1862	' ---------------------------'/)
	1863	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1864	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1865	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1866	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1867	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1868	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1869	470 FORMAT (//' Actions during the simulation:'/ &
	1870	' -----------------------------'/)
[94]	1871	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1872	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1873	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1874	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1875	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1876	' to i/j =',I4)
	1877	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1878	1X,F5.3, ' m2/s2')
	1879	474 FORMAT (' Random number generator used : ',A/)
	1880	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1881	'respectively, if'/ &
	1882	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1883	' 3D-simulation'/)
	1884	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1885	'respectively, if the'/ &
	1886	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1887	' the 3D-simulation'/)
	1888	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1889	'respectively, if the'/ &
	1890	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1891	' the 3D-simulation'/)
	1892	480 FORMAT (' Particles:'/ &
	1893	' ---------'// &
	1894	' Particle advection is active (switched on at t = ', F7.1, &
	1895	' s)'/ &
	1896	' Start of new particle generations every ',F6.1,' s'/ &
	1897	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1898	' bottom: ', A, ' top: ', A/&
	1899	' Maximum particle age: ',F9.1,' s'/ &
[117]	1900	' Advection stopped at t = ',F9.1,' s'/ &
	1901	' Particles are sorted every ',F9.1,' s'/)
[1]	1902	481 FORMAT (' Particles have random start positions'/)
[336]	1903	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1904	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1905	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1906	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1907	' Maximum age of the end of the tail: ',F8.2,' s')
	1908	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1909	486 FORMAT (' Particle statistics are written on file'/)
	1910	487 FORMAT (' Number of particle groups: ',I2/)
	1911	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1912	' minimum timestep for advection: ', F7.5/)
	1913	489 FORMAT (' Number of particles simultaneously released at each ', &
	1914	'point: ', I5/)
	1915	490 FORMAT (' Particle group ',I2,':'/ &
	1916	' Particle radius: ',E10.3, 'm')
	1917	491 FORMAT (' Particle inertia is activated'/ &
	1918	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1919	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1920	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1921	' y:',F8.1,' - ',F8.1,' m'/&
	1922	' z:',F8.1,' - ',F8.1,' m'/&
	1923	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1924	' m dz = ',F8.1,' m'/)
	1925	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1926	F8.2,' s'/)
	1927	495 FORMAT (' Number of particles in total domain: ',I10/)
	1928	500 FORMAT (//' 1D-Model parameters:'/ &
	1929	' -------------------'// &
	1930	' Simulation time: ',F8.1,' s'/ &
	1931	' Run-controll output every: ',F8.1,' s'/ &
	1932	' Vertical profile output every: ',F8.1,' s'/ &
	1933	' Mixing length calculation: ',A/ &
	1934	' Dissipation calculation: ',A/)
	1935	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1936
	1937
	1938	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |