[1] | 1 | SUBROUTINE header |
---|
| 2 | |
---|
| 3 | !------------------------------------------------------------------------------! |
---|
[254] | 4 | ! Current revisions: |
---|
[1] | 5 | ! ----------------- |
---|
[411] | 6 | ! +large scale vertical motion (subsidence/ascent) |
---|
[392] | 7 | ! |
---|
| 8 | ! |
---|
[410] | 9 | ! Branch revisions: |
---|
| 10 | ! ----------------- |
---|
| 11 | ! Masked data output: + dt_domask, mask_01~20_x|y|z, mask_01~20_x|y|z_loop, |
---|
| 12 | ! mask_scale|_x|y|z, masks, netcdf_format_mask[_av], skip_time_domask |
---|
| 13 | ! |
---|
[392] | 14 | ! Former revisions: |
---|
| 15 | ! ----------------- |
---|
| 16 | ! $Id: header.f90 411 2009-12-11 14:15:58Z heinze $ |
---|
| 17 | ! |
---|
| 18 | ! 346 2009-07-06 10:13:41Z raasch |
---|
[328] | 19 | ! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill' |
---|
[291] | 20 | ! Coupling with independent precursor runs. |
---|
[254] | 21 | ! Output of messages replaced by message handling routine. |
---|
[336] | 22 | ! Output of several additional dvr parameters |
---|
[240] | 23 | ! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left, |
---|
[241] | 24 | ! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b, |
---|
| 25 | ! dp_smooth, dpdxy, u_bulk, v_bulk |
---|
[256] | 26 | ! topography_grid_convention moved from user_header |
---|
[292] | 27 | ! small bugfix concerning 3d 64bit netcdf output format |
---|
[1] | 28 | ! |
---|
[226] | 29 | ! 206 2008-10-13 14:59:11Z raasch |
---|
| 30 | ! Bugfix: error in zu index in case of section_xy = -1 |
---|
| 31 | ! |
---|
[200] | 32 | ! 198 2008-09-17 08:55:28Z raasch |
---|
| 33 | ! Format adjustments allowing output of larger revision numbers |
---|
| 34 | ! |
---|
[198] | 35 | ! 197 2008-09-16 15:29:03Z raasch |
---|
| 36 | ! allow 100 spectra levels instead of 10 for consistency with |
---|
| 37 | ! define_netcdf_header, |
---|
| 38 | ! bugfix in the output of the characteristic levels of potential temperature, |
---|
| 39 | ! geostrophic wind, scalar concentration, humidity and leaf area density, |
---|
| 40 | ! output of turbulence recycling informations |
---|
| 41 | ! |
---|
[139] | 42 | ! 138 2007-11-28 10:03:58Z letzel |
---|
| 43 | ! Allow new case bc_uv_t = 'dirichlet_0' for channel flow. |
---|
| 44 | ! Allow two instead of one digit to specify isosurface and slicer variables. |
---|
| 45 | ! Output of sorting frequency of particles |
---|
| 46 | ! |
---|
[110] | 47 | ! 108 2007-08-24 15:10:38Z letzel |
---|
| 48 | ! Output of informations for coupled model runs (boundary conditions etc.) |
---|
| 49 | ! + output of momentumfluxes at the top boundary |
---|
| 50 | ! Rayleigh damping for ocean, e_init |
---|
| 51 | ! |
---|
[98] | 52 | ! 97 2007-06-21 08:23:15Z raasch |
---|
| 53 | ! Adjustments for the ocean version. |
---|
| 54 | ! use_pt_reference renamed use_reference |
---|
| 55 | ! |
---|
[90] | 56 | ! 87 2007-05-22 15:46:47Z raasch |
---|
| 57 | ! Bugfix: output of use_upstream_for_tke |
---|
| 58 | ! |
---|
[83] | 59 | ! 82 2007-04-16 15:40:52Z raasch |
---|
| 60 | ! Preprocessor strings for different linux clusters changed to "lc", |
---|
| 61 | ! routine local_flush is used for buffer flushing |
---|
| 62 | ! |
---|
[77] | 63 | ! 76 2007-03-29 00:58:32Z raasch |
---|
| 64 | ! Output of netcdf_64bit_3d, particles-package is now part of the default code, |
---|
| 65 | ! output of the loop optimization method, moisture renamed humidity, |
---|
| 66 | ! output of subversion revision number |
---|
| 67 | ! |
---|
[39] | 68 | ! 19 2007-02-23 04:53:48Z raasch |
---|
| 69 | ! Output of scalar flux applied at top boundary |
---|
| 70 | ! |
---|
[3] | 71 | ! RCS Log replace by Id keyword, revision history cleaned up |
---|
| 72 | ! |
---|
[1] | 73 | ! Revision 1.63 2006/08/22 13:53:13 raasch |
---|
| 74 | ! Output of dz_max |
---|
| 75 | ! |
---|
| 76 | ! Revision 1.1 1997/08/11 06:17:20 raasch |
---|
| 77 | ! Initial revision |
---|
| 78 | ! |
---|
| 79 | ! |
---|
| 80 | ! Description: |
---|
| 81 | ! ------------ |
---|
| 82 | ! Writing a header with all important informations about the actual run. |
---|
| 83 | ! This subroutine is called three times, two times at the beginning |
---|
| 84 | ! (writing information on files RUN_CONTROL and HEADER) and one time at the |
---|
| 85 | ! end of the run, then writing additional information about CPU-usage on file |
---|
| 86 | ! header. |
---|
[411] | 87 | !-----------------------------------------------------------------------------! |
---|
[1] | 88 | |
---|
| 89 | USE arrays_3d |
---|
| 90 | USE control_parameters |
---|
| 91 | USE cloud_parameters |
---|
| 92 | USE cpulog |
---|
| 93 | USE dvrp_variables |
---|
| 94 | USE grid_variables |
---|
| 95 | USE indices |
---|
| 96 | USE model_1d |
---|
| 97 | USE particle_attributes |
---|
| 98 | USE pegrid |
---|
[411] | 99 | USE subsidence_mod |
---|
[1] | 100 | USE spectrum |
---|
| 101 | |
---|
| 102 | IMPLICIT NONE |
---|
| 103 | |
---|
| 104 | CHARACTER (LEN=1) :: prec |
---|
| 105 | CHARACTER (LEN=2) :: do2d_mode |
---|
| 106 | CHARACTER (LEN=5) :: section_chr |
---|
| 107 | CHARACTER (LEN=9) :: time_to_string |
---|
| 108 | CHARACTER (LEN=10) :: coor_chr, host_chr |
---|
| 109 | CHARACTER (LEN=16) :: begin_chr |
---|
[200] | 110 | CHARACTER (LEN=23) :: ver_rev |
---|
[1] | 111 | CHARACTER (LEN=40) :: output_format |
---|
[167] | 112 | CHARACTER (LEN=70) :: char1, char2, dopr_chr, & |
---|
[1] | 113 | do2d_xy, do2d_xz, do2d_yz, do3d_chr, & |
---|
[410] | 114 | domask_chr, run_classification |
---|
[167] | 115 | CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, & |
---|
| 116 | temperatures, ugcomponent, vgcomponent |
---|
[1] | 117 | CHARACTER (LEN=85) :: roben, runten |
---|
| 118 | |
---|
[410] | 119 | CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) |
---|
| 120 | |
---|
| 121 | INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, & |
---|
| 122 | cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type |
---|
[1] | 123 | REAL :: cpuseconds_per_simulated_second |
---|
| 124 | |
---|
| 125 | ! |
---|
| 126 | !-- Open the output file. At the end of the simulation, output is directed |
---|
| 127 | !-- to unit 19. |
---|
| 128 | IF ( ( runnr == 0 .OR. force_print_header ) .AND. & |
---|
| 129 | .NOT. simulated_time_at_begin /= simulated_time ) THEN |
---|
| 130 | io = 15 ! header output on file RUN_CONTROL |
---|
| 131 | ELSE |
---|
| 132 | io = 19 ! header output on file HEADER |
---|
| 133 | ENDIF |
---|
| 134 | CALL check_open( io ) |
---|
| 135 | |
---|
| 136 | ! |
---|
| 137 | !-- At the end of the run, output file (HEADER) will be rewritten with |
---|
| 138 | !-- new informations |
---|
| 139 | IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 ) |
---|
| 140 | |
---|
| 141 | ! |
---|
| 142 | !-- Determine kind of model run |
---|
| 143 | IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN |
---|
| 144 | run_classification = '3D - restart run' |
---|
[328] | 145 | ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN |
---|
| 146 | run_classification = '3D - run with cyclic fill of 3D - prerun data' |
---|
[147] | 147 | ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN |
---|
| 148 | run_classification = '3D - run without 1D - prerun' |
---|
[197] | 149 | ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN |
---|
[147] | 150 | run_classification = '3D - run with 1D - prerun' |
---|
[197] | 151 | ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN |
---|
| 152 | run_classification = '3D - run initialized by user' |
---|
[1] | 153 | ELSE |
---|
[254] | 154 | message_string = ' unknown action(s): ' // TRIM( initializing_actions ) |
---|
| 155 | CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 ) |
---|
[1] | 156 | ENDIF |
---|
[97] | 157 | IF ( ocean ) THEN |
---|
| 158 | run_classification = 'ocean - ' // run_classification |
---|
| 159 | ELSE |
---|
| 160 | run_classification = 'atmosphere - ' // run_classification |
---|
| 161 | ENDIF |
---|
[1] | 162 | |
---|
| 163 | ! |
---|
| 164 | !-- Run-identification, date, time, host |
---|
| 165 | host_chr = host(1:10) |
---|
[75] | 166 | ver_rev = TRIM( version ) // ' ' // TRIM( revision ) |
---|
[102] | 167 | WRITE ( io, 100 ) ver_rev, TRIM( run_classification ) |
---|
[291] | 168 | IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN |
---|
| 169 | #if defined( __mpi2 ) |
---|
| 170 | mpi_type = 2 |
---|
| 171 | #else |
---|
| 172 | mpi_type = 1 |
---|
| 173 | #endif |
---|
| 174 | WRITE ( io, 101 ) mpi_type, coupling_mode |
---|
| 175 | ENDIF |
---|
[102] | 176 | WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, & |
---|
| 177 | ADJUSTR( host_chr ) |
---|
[1] | 178 | #if defined( __parallel ) |
---|
| 179 | IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN |
---|
| 180 | char1 = 'calculated' |
---|
| 181 | ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. & |
---|
| 182 | host(1:2) == 'lc' ) .AND. & |
---|
| 183 | npex == -1 .AND. pdims(2) == 1 ) THEN |
---|
| 184 | char1 = 'forced' |
---|
| 185 | ELSE |
---|
| 186 | char1 = 'predefined' |
---|
| 187 | ENDIF |
---|
| 188 | IF ( threads_per_task == 1 ) THEN |
---|
[102] | 189 | WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 ) |
---|
[1] | 190 | ELSE |
---|
[102] | 191 | WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, & |
---|
[1] | 192 | threads_per_task, pdims(1), pdims(2), TRIM( char1 ) |
---|
| 193 | ENDIF |
---|
| 194 | IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. & |
---|
| 195 | host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. & |
---|
| 196 | npex == -1 .AND. pdims(2) == 1 ) & |
---|
| 197 | THEN |
---|
[102] | 198 | WRITE ( io, 106 ) |
---|
[1] | 199 | ELSEIF ( pdims(2) == 1 ) THEN |
---|
[102] | 200 | WRITE ( io, 107 ) 'x' |
---|
[1] | 201 | ELSEIF ( pdims(1) == 1 ) THEN |
---|
[102] | 202 | WRITE ( io, 107 ) 'y' |
---|
[1] | 203 | ENDIF |
---|
[102] | 204 | IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 ) |
---|
[1] | 205 | #endif |
---|
| 206 | WRITE ( io, 99 ) |
---|
| 207 | |
---|
| 208 | ! |
---|
| 209 | !-- Numerical schemes |
---|
| 210 | WRITE ( io, 110 ) |
---|
| 211 | IF ( psolver(1:7) == 'poisfft' ) THEN |
---|
| 212 | WRITE ( io, 111 ) TRIM( fft_method ) |
---|
| 213 | IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 ) |
---|
| 214 | ELSEIF ( psolver == 'sor' ) THEN |
---|
| 215 | WRITE ( io, 112 ) nsor_ini, nsor, omega_sor |
---|
| 216 | ELSEIF ( psolver == 'multigrid' ) THEN |
---|
| 217 | WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb |
---|
| 218 | IF ( mg_cycles == -1 ) THEN |
---|
| 219 | WRITE ( io, 140 ) residual_limit |
---|
| 220 | ELSE |
---|
| 221 | WRITE ( io, 141 ) mg_cycles |
---|
| 222 | ENDIF |
---|
| 223 | IF ( mg_switch_to_pe0_level == 0 ) THEN |
---|
| 224 | WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, & |
---|
| 225 | nzt_mg(1) |
---|
[197] | 226 | ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN |
---|
[1] | 227 | WRITE ( io, 137 ) mg_switch_to_pe0_level, & |
---|
| 228 | mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, & |
---|
| 229 | mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, & |
---|
| 230 | nzt_mg(mg_switch_to_pe0_level), & |
---|
| 231 | nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, & |
---|
| 232 | nzt_mg(1) |
---|
| 233 | ENDIF |
---|
| 234 | ENDIF |
---|
| 235 | IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) & |
---|
| 236 | THEN |
---|
| 237 | WRITE ( io, 142 ) |
---|
| 238 | ENDIF |
---|
| 239 | |
---|
| 240 | IF ( momentum_advec == 'pw-scheme' ) THEN |
---|
| 241 | WRITE ( io, 113 ) |
---|
| 242 | ELSE |
---|
| 243 | WRITE ( io, 114 ) |
---|
| 244 | IF ( cut_spline_overshoot ) WRITE ( io, 124 ) |
---|
| 245 | IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. & |
---|
| 246 | overshoot_limit_w /= 0.0 ) THEN |
---|
| 247 | WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, & |
---|
| 248 | overshoot_limit_w |
---|
| 249 | ENDIF |
---|
| 250 | IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. & |
---|
| 251 | ups_limit_w /= 0.0 ) & |
---|
| 252 | THEN |
---|
| 253 | WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w |
---|
| 254 | ENDIF |
---|
| 255 | IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor |
---|
| 256 | ENDIF |
---|
| 257 | IF ( scalar_advec == 'pw-scheme' ) THEN |
---|
| 258 | WRITE ( io, 116 ) |
---|
| 259 | ELSEIF ( scalar_advec == 'ups-scheme' ) THEN |
---|
| 260 | WRITE ( io, 117 ) |
---|
| 261 | IF ( cut_spline_overshoot ) WRITE ( io, 124 ) |
---|
| 262 | IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN |
---|
| 263 | WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt |
---|
| 264 | ENDIF |
---|
| 265 | IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN |
---|
| 266 | WRITE ( io, 126 ) ups_limit_e, ups_limit_pt |
---|
| 267 | ENDIF |
---|
| 268 | ELSE |
---|
| 269 | WRITE ( io, 118 ) |
---|
| 270 | ENDIF |
---|
[63] | 271 | |
---|
| 272 | WRITE ( io, 139 ) TRIM( loop_optimization ) |
---|
| 273 | |
---|
[1] | 274 | IF ( galilei_transformation ) THEN |
---|
| 275 | IF ( use_ug_for_galilei_tr ) THEN |
---|
| 276 | char1 = 'geostrophic wind' |
---|
| 277 | ELSE |
---|
| 278 | char1 = 'mean wind in model domain' |
---|
| 279 | ENDIF |
---|
| 280 | IF ( simulated_time_at_begin == simulated_time ) THEN |
---|
| 281 | char2 = 'at the start of the run' |
---|
| 282 | ELSE |
---|
| 283 | char2 = 'at the end of the run' |
---|
| 284 | ENDIF |
---|
| 285 | WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), & |
---|
| 286 | advected_distance_x/1000.0, advected_distance_y/1000.0 |
---|
| 287 | ENDIF |
---|
| 288 | IF ( timestep_scheme == 'leapfrog' ) THEN |
---|
| 289 | WRITE ( io, 120 ) |
---|
| 290 | ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN |
---|
| 291 | WRITE ( io, 121 ) |
---|
| 292 | ELSE |
---|
| 293 | WRITE ( io, 122 ) timestep_scheme |
---|
| 294 | ENDIF |
---|
[87] | 295 | IF ( use_upstream_for_tke ) WRITE ( io, 143 ) |
---|
[1] | 296 | IF ( rayleigh_damping_factor /= 0.0 ) THEN |
---|
[108] | 297 | IF ( .NOT. ocean ) THEN |
---|
| 298 | WRITE ( io, 123 ) 'above', rayleigh_damping_height, & |
---|
| 299 | rayleigh_damping_factor |
---|
| 300 | ELSE |
---|
| 301 | WRITE ( io, 123 ) 'below', rayleigh_damping_height, & |
---|
| 302 | rayleigh_damping_factor |
---|
| 303 | ENDIF |
---|
[1] | 304 | ENDIF |
---|
[75] | 305 | IF ( humidity ) THEN |
---|
[1] | 306 | IF ( .NOT. cloud_physics ) THEN |
---|
| 307 | WRITE ( io, 129 ) |
---|
| 308 | ELSE |
---|
| 309 | WRITE ( io, 130 ) |
---|
| 310 | WRITE ( io, 131 ) |
---|
| 311 | IF ( radiation ) WRITE ( io, 132 ) |
---|
| 312 | IF ( precipitation ) WRITE ( io, 133 ) |
---|
| 313 | ENDIF |
---|
| 314 | ENDIF |
---|
| 315 | IF ( passive_scalar ) WRITE ( io, 134 ) |
---|
[240] | 316 | IF ( conserve_volume_flow ) THEN |
---|
[241] | 317 | WRITE ( io, 150 ) conserve_volume_flow_mode |
---|
| 318 | IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN |
---|
| 319 | WRITE ( io, 151 ) u_bulk, v_bulk |
---|
| 320 | ENDIF |
---|
[240] | 321 | ELSEIF ( dp_external ) THEN |
---|
| 322 | IF ( dp_smooth ) THEN |
---|
[241] | 323 | WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.' |
---|
[240] | 324 | ELSE |
---|
[241] | 325 | WRITE ( io, 152 ) dpdxy, dp_level_b, '.' |
---|
[240] | 326 | ENDIF |
---|
| 327 | ENDIF |
---|
[411] | 328 | IF ( large_scale_subsidence ) THEN |
---|
| 329 | WRITE ( io, 153 ) |
---|
| 330 | WRITE ( io, 154 ) |
---|
| 331 | ENDIF |
---|
[1] | 332 | WRITE ( io, 99 ) |
---|
| 333 | |
---|
| 334 | ! |
---|
| 335 | !-- Runtime and timestep informations |
---|
| 336 | WRITE ( io, 200 ) |
---|
| 337 | IF ( .NOT. dt_fixed ) THEN |
---|
| 338 | WRITE ( io, 201 ) dt_max, cfl_factor |
---|
| 339 | ELSE |
---|
| 340 | WRITE ( io, 202 ) dt |
---|
| 341 | ENDIF |
---|
| 342 | WRITE ( io, 203 ) simulated_time_at_begin, end_time |
---|
| 343 | |
---|
| 344 | IF ( time_restart /= 9999999.9 .AND. & |
---|
| 345 | simulated_time_at_begin == simulated_time ) THEN |
---|
| 346 | IF ( dt_restart == 9999999.9 ) THEN |
---|
| 347 | WRITE ( io, 204 ) ' Restart at: ',time_restart |
---|
| 348 | ELSE |
---|
| 349 | WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart |
---|
| 350 | ENDIF |
---|
| 351 | ENDIF |
---|
| 352 | |
---|
| 353 | IF ( simulated_time_at_begin /= simulated_time ) THEN |
---|
| 354 | i = MAX ( log_point_s(10)%counts, 1 ) |
---|
| 355 | IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN |
---|
| 356 | cpuseconds_per_simulated_second = 0.0 |
---|
| 357 | ELSE |
---|
| 358 | cpuseconds_per_simulated_second = log_point_s(10)%sum / & |
---|
| 359 | ( simulated_time - & |
---|
| 360 | simulated_time_at_begin ) |
---|
| 361 | ENDIF |
---|
| 362 | WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, & |
---|
| 363 | log_point_s(10)%sum / REAL( i ), & |
---|
| 364 | cpuseconds_per_simulated_second |
---|
| 365 | IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN |
---|
| 366 | IF ( dt_restart == 9999999.9 ) THEN |
---|
| 367 | WRITE ( io, 204 ) ' Next restart at: ',time_restart |
---|
| 368 | ELSE |
---|
| 369 | WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart |
---|
| 370 | ENDIF |
---|
| 371 | ENDIF |
---|
| 372 | ENDIF |
---|
| 373 | |
---|
| 374 | ! |
---|
[291] | 375 | !-- Start time for coupled runs, if independent precursor runs for atmosphere |
---|
| 376 | !-- and ocean are used. In this case, coupling_start_time defines the time |
---|
| 377 | !-- when the coupling is switched on. |
---|
| 378 | IF ( coupling_start_time /= 0.0 ) THEN |
---|
| 379 | IF ( coupling_start_time >= simulated_time_at_begin ) THEN |
---|
| 380 | char1 = 'Precursor run for a coupled atmosphere-ocean run' |
---|
| 381 | ELSE |
---|
| 382 | char1 = 'Coupled atmosphere-ocean run following independent ' // & |
---|
| 383 | 'precursor runs' |
---|
| 384 | ENDIF |
---|
| 385 | WRITE ( io, 207 ) char1, coupling_start_time |
---|
| 386 | ENDIF |
---|
| 387 | |
---|
| 388 | ! |
---|
[1] | 389 | !-- Computational grid |
---|
[94] | 390 | IF ( .NOT. ocean ) THEN |
---|
| 391 | WRITE ( io, 250 ) dx, dy, dz, (nx+1)*dx, (ny+1)*dy, zu(nzt+1) |
---|
| 392 | IF ( dz_stretch_level_index < nzt+1 ) THEN |
---|
| 393 | WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, & |
---|
| 394 | dz_stretch_factor, dz_max |
---|
| 395 | ENDIF |
---|
| 396 | ELSE |
---|
| 397 | WRITE ( io, 250 ) dx, dy, dz, (nx+1)*dx, (ny+1)*dy, zu(0) |
---|
| 398 | IF ( dz_stretch_level_index > 0 ) THEN |
---|
| 399 | WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, & |
---|
| 400 | dz_stretch_factor, dz_max |
---|
| 401 | ENDIF |
---|
[1] | 402 | ENDIF |
---|
| 403 | WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), & |
---|
| 404 | MIN( nnz+2, nzt+2 ) |
---|
[76] | 405 | IF ( numprocs > 1 ) THEN |
---|
| 406 | IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN |
---|
| 407 | WRITE ( io, 255 ) |
---|
| 408 | ELSE |
---|
| 409 | WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2 |
---|
| 410 | ENDIF |
---|
[1] | 411 | ENDIF |
---|
| 412 | IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface |
---|
| 413 | |
---|
| 414 | ! |
---|
| 415 | !-- Topography |
---|
| 416 | WRITE ( io, 270 ) topography |
---|
| 417 | SELECT CASE ( TRIM( topography ) ) |
---|
| 418 | |
---|
| 419 | CASE ( 'flat' ) |
---|
| 420 | ! no actions necessary |
---|
| 421 | |
---|
| 422 | CASE ( 'single_building' ) |
---|
| 423 | blx = INT( building_length_x / dx ) |
---|
| 424 | bly = INT( building_length_y / dy ) |
---|
| 425 | bh = INT( building_height / dz ) |
---|
| 426 | |
---|
| 427 | IF ( building_wall_left == 9999999.9 ) THEN |
---|
| 428 | building_wall_left = ( nx + 1 - blx ) / 2 * dx |
---|
| 429 | ENDIF |
---|
| 430 | bxl = INT ( building_wall_left / dx + 0.5 ) |
---|
| 431 | bxr = bxl + blx |
---|
| 432 | |
---|
| 433 | IF ( building_wall_south == 9999999.9 ) THEN |
---|
| 434 | building_wall_south = ( ny + 1 - bly ) / 2 * dy |
---|
| 435 | ENDIF |
---|
| 436 | bys = INT ( building_wall_south / dy + 0.5 ) |
---|
| 437 | byn = bys + bly |
---|
| 438 | |
---|
| 439 | WRITE ( io, 271 ) building_length_x, building_length_y, & |
---|
| 440 | building_height, bxl, bxr, bys, byn |
---|
| 441 | |
---|
[240] | 442 | CASE ( 'single_street_canyon' ) |
---|
| 443 | ch = NINT( canyon_height / dz ) |
---|
| 444 | IF ( canyon_width_x /= 9999999.9 ) THEN |
---|
| 445 | ! |
---|
| 446 | !-- Street canyon in y direction |
---|
| 447 | cwx = NINT( canyon_width_x / dx ) |
---|
| 448 | IF ( canyon_wall_left == 9999999.9 ) THEN |
---|
| 449 | canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx |
---|
| 450 | ENDIF |
---|
| 451 | cxl = NINT( canyon_wall_left / dx ) |
---|
| 452 | cxr = cxl + cwx |
---|
| 453 | WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr |
---|
| 454 | |
---|
| 455 | ELSEIF ( canyon_width_y /= 9999999.9 ) THEN |
---|
| 456 | ! |
---|
| 457 | !-- Street canyon in x direction |
---|
| 458 | cwy = NINT( canyon_width_y / dy ) |
---|
| 459 | IF ( canyon_wall_south == 9999999.9 ) THEN |
---|
| 460 | canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy |
---|
| 461 | ENDIF |
---|
| 462 | cys = NINT( canyon_wall_south / dy ) |
---|
| 463 | cyn = cys + cwy |
---|
| 464 | WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn |
---|
| 465 | ENDIF |
---|
| 466 | |
---|
[1] | 467 | END SELECT |
---|
| 468 | |
---|
[256] | 469 | IF ( TRIM( topography ) /= 'flat' ) THEN |
---|
| 470 | IF ( TRIM( topography_grid_convention ) == ' ' ) THEN |
---|
| 471 | IF ( TRIM( topography ) == 'single_building' .OR. & |
---|
| 472 | TRIM( topography ) == 'single_street_canyon' ) THEN |
---|
| 473 | WRITE ( io, 278 ) |
---|
| 474 | ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN |
---|
| 475 | WRITE ( io, 279 ) |
---|
| 476 | ENDIF |
---|
| 477 | ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN |
---|
| 478 | WRITE ( io, 278 ) |
---|
| 479 | ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN |
---|
| 480 | WRITE ( io, 279 ) |
---|
| 481 | ENDIF |
---|
| 482 | ENDIF |
---|
| 483 | |
---|
[138] | 484 | IF ( plant_canopy ) THEN |
---|
| 485 | |
---|
| 486 | WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient |
---|
[153] | 487 | IF ( passive_scalar ) THEN |
---|
| 488 | WRITE ( io, 281 ) scalar_exchange_coefficient, & |
---|
| 489 | leaf_surface_concentration |
---|
| 490 | ENDIF |
---|
[138] | 491 | |
---|
[1] | 492 | ! |
---|
[153] | 493 | !-- Heat flux at the top of vegetation |
---|
| 494 | WRITE ( io, 282 ) cthf |
---|
| 495 | |
---|
| 496 | ! |
---|
[138] | 497 | !-- Leaf area density profile |
---|
| 498 | !-- Building output strings, starting with surface value |
---|
| 499 | WRITE ( learde, '(F6.2)' ) lad_surface |
---|
| 500 | gradients = '------' |
---|
| 501 | slices = ' 0' |
---|
| 502 | coordinates = ' 0.0' |
---|
| 503 | i = 1 |
---|
| 504 | DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 505 | |
---|
| 506 | WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i)) |
---|
| 507 | learde = TRIM( learde ) // ' ' // TRIM( coor_chr ) |
---|
| 508 | |
---|
| 509 | WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i) |
---|
| 510 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 511 | |
---|
| 512 | WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i) |
---|
| 513 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 514 | |
---|
| 515 | WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i) |
---|
| 516 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 517 | |
---|
| 518 | i = i + 1 |
---|
| 519 | ENDDO |
---|
| 520 | |
---|
[153] | 521 | WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), & |
---|
[138] | 522 | TRIM( gradients ), TRIM( slices ) |
---|
| 523 | |
---|
| 524 | ENDIF |
---|
| 525 | |
---|
| 526 | ! |
---|
[1] | 527 | !-- Boundary conditions |
---|
| 528 | IF ( ibc_p_b == 0 ) THEN |
---|
| 529 | runten = 'p(0) = 0 |' |
---|
| 530 | ELSEIF ( ibc_p_b == 1 ) THEN |
---|
| 531 | runten = 'p(0) = p(1) |' |
---|
| 532 | ELSE |
---|
| 533 | runten = 'p(0) = p(1) +R|' |
---|
| 534 | ENDIF |
---|
| 535 | IF ( ibc_p_t == 0 ) THEN |
---|
| 536 | roben = 'p(nzt+1) = 0 |' |
---|
| 537 | ELSE |
---|
| 538 | roben = 'p(nzt+1) = p(nzt) |' |
---|
| 539 | ENDIF |
---|
| 540 | |
---|
| 541 | IF ( ibc_uv_b == 0 ) THEN |
---|
| 542 | runten = TRIM( runten ) // ' uv(0) = -uv(1) |' |
---|
| 543 | ELSE |
---|
| 544 | runten = TRIM( runten ) // ' uv(0) = uv(1) |' |
---|
| 545 | ENDIF |
---|
[132] | 546 | IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN |
---|
| 547 | roben = TRIM( roben ) // ' uv(nzt+1) = 0 |' |
---|
| 548 | ELSEIF ( ibc_uv_t == 0 ) THEN |
---|
[1] | 549 | roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) |' |
---|
| 550 | ELSE |
---|
| 551 | roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) |' |
---|
| 552 | ENDIF |
---|
| 553 | |
---|
| 554 | IF ( ibc_pt_b == 0 ) THEN |
---|
| 555 | runten = TRIM( runten ) // ' pt(0) = pt_surface' |
---|
[102] | 556 | ELSEIF ( ibc_pt_b == 1 ) THEN |
---|
[1] | 557 | runten = TRIM( runten ) // ' pt(0) = pt(1)' |
---|
[102] | 558 | ELSEIF ( ibc_pt_b == 2 ) THEN |
---|
| 559 | runten = TRIM( runten ) // ' pt(0) = from coupled model' |
---|
[1] | 560 | ENDIF |
---|
| 561 | IF ( ibc_pt_t == 0 ) THEN |
---|
[19] | 562 | roben = TRIM( roben ) // ' pt(nzt+1) = pt_top' |
---|
| 563 | ELSEIF( ibc_pt_t == 1 ) THEN |
---|
| 564 | roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)' |
---|
| 565 | ELSEIF( ibc_pt_t == 2 ) THEN |
---|
| 566 | roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini' |
---|
[1] | 567 | ENDIF |
---|
| 568 | |
---|
| 569 | WRITE ( io, 300 ) runten, roben |
---|
| 570 | |
---|
| 571 | IF ( .NOT. constant_diffusion ) THEN |
---|
| 572 | IF ( ibc_e_b == 1 ) THEN |
---|
| 573 | runten = 'e(0) = e(1)' |
---|
| 574 | ELSE |
---|
| 575 | runten = 'e(0) = e(1) = (u*/0.1)**2' |
---|
| 576 | ENDIF |
---|
| 577 | roben = 'e(nzt+1) = e(nzt) = e(nzt-1)' |
---|
| 578 | |
---|
[97] | 579 | WRITE ( io, 301 ) 'e', runten, roben |
---|
[1] | 580 | |
---|
| 581 | ENDIF |
---|
| 582 | |
---|
[97] | 583 | IF ( ocean ) THEN |
---|
| 584 | runten = 'sa(0) = sa(1)' |
---|
| 585 | IF ( ibc_sa_t == 0 ) THEN |
---|
| 586 | roben = 'sa(nzt+1) = sa_surface' |
---|
[1] | 587 | ELSE |
---|
[97] | 588 | roben = 'sa(nzt+1) = sa(nzt)' |
---|
[1] | 589 | ENDIF |
---|
[97] | 590 | WRITE ( io, 301 ) 'sa', runten, roben |
---|
| 591 | ENDIF |
---|
[1] | 592 | |
---|
[97] | 593 | IF ( humidity ) THEN |
---|
| 594 | IF ( ibc_q_b == 0 ) THEN |
---|
| 595 | runten = 'q(0) = q_surface' |
---|
| 596 | ELSE |
---|
| 597 | runten = 'q(0) = q(1)' |
---|
| 598 | ENDIF |
---|
| 599 | IF ( ibc_q_t == 0 ) THEN |
---|
| 600 | roben = 'q(nzt) = q_top' |
---|
| 601 | ELSE |
---|
| 602 | roben = 'q(nzt) = q(nzt-1) + dq/dz' |
---|
| 603 | ENDIF |
---|
| 604 | WRITE ( io, 301 ) 'q', runten, roben |
---|
| 605 | ENDIF |
---|
[1] | 606 | |
---|
[97] | 607 | IF ( passive_scalar ) THEN |
---|
| 608 | IF ( ibc_q_b == 0 ) THEN |
---|
| 609 | runten = 's(0) = s_surface' |
---|
| 610 | ELSE |
---|
| 611 | runten = 's(0) = s(1)' |
---|
| 612 | ENDIF |
---|
| 613 | IF ( ibc_q_t == 0 ) THEN |
---|
| 614 | roben = 's(nzt) = s_top' |
---|
| 615 | ELSE |
---|
| 616 | roben = 's(nzt) = s(nzt-1) + ds/dz' |
---|
| 617 | ENDIF |
---|
| 618 | WRITE ( io, 301 ) 's', runten, roben |
---|
[1] | 619 | ENDIF |
---|
| 620 | |
---|
| 621 | IF ( use_surface_fluxes ) THEN |
---|
| 622 | WRITE ( io, 303 ) |
---|
| 623 | IF ( constant_heatflux ) THEN |
---|
| 624 | WRITE ( io, 306 ) surface_heatflux |
---|
| 625 | IF ( random_heatflux ) WRITE ( io, 307 ) |
---|
| 626 | ENDIF |
---|
[75] | 627 | IF ( humidity .AND. constant_waterflux ) THEN |
---|
[1] | 628 | WRITE ( io, 311 ) surface_waterflux |
---|
| 629 | ENDIF |
---|
| 630 | IF ( passive_scalar .AND. constant_waterflux ) THEN |
---|
| 631 | WRITE ( io, 313 ) surface_waterflux |
---|
| 632 | ENDIF |
---|
| 633 | ENDIF |
---|
| 634 | |
---|
[19] | 635 | IF ( use_top_fluxes ) THEN |
---|
| 636 | WRITE ( io, 304 ) |
---|
[102] | 637 | IF ( coupling_mode == 'uncoupled' ) THEN |
---|
[151] | 638 | WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v |
---|
[102] | 639 | IF ( constant_top_heatflux ) THEN |
---|
| 640 | WRITE ( io, 306 ) top_heatflux |
---|
| 641 | ENDIF |
---|
| 642 | ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN |
---|
| 643 | WRITE ( io, 316 ) |
---|
[19] | 644 | ENDIF |
---|
[97] | 645 | IF ( ocean .AND. constant_top_salinityflux ) THEN |
---|
| 646 | WRITE ( io, 309 ) top_salinityflux |
---|
| 647 | ENDIF |
---|
[75] | 648 | IF ( humidity .OR. passive_scalar ) THEN |
---|
[19] | 649 | WRITE ( io, 315 ) |
---|
| 650 | ENDIF |
---|
| 651 | ENDIF |
---|
| 652 | |
---|
[1] | 653 | IF ( prandtl_layer ) THEN |
---|
[94] | 654 | WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, & |
---|
| 655 | rif_min, rif_max |
---|
[1] | 656 | IF ( .NOT. constant_heatflux ) WRITE ( io, 308 ) |
---|
[75] | 657 | IF ( humidity .AND. .NOT. constant_waterflux ) THEN |
---|
[1] | 658 | WRITE ( io, 312 ) |
---|
| 659 | ENDIF |
---|
| 660 | IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN |
---|
| 661 | WRITE ( io, 314 ) |
---|
| 662 | ENDIF |
---|
| 663 | ELSE |
---|
| 664 | IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN |
---|
| 665 | WRITE ( io, 310 ) rif_min, rif_max |
---|
| 666 | ENDIF |
---|
| 667 | ENDIF |
---|
| 668 | |
---|
| 669 | WRITE ( io, 317 ) bc_lr, bc_ns |
---|
| 670 | IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN |
---|
| 671 | WRITE ( io, 318 ) outflow_damping_width, km_damp_max |
---|
[151] | 672 | IF ( turbulent_inflow ) THEN |
---|
| 673 | WRITE ( io, 319 ) recycling_width, recycling_plane, & |
---|
| 674 | inflow_damping_height, inflow_damping_width |
---|
| 675 | ENDIF |
---|
[1] | 676 | ENDIF |
---|
| 677 | |
---|
| 678 | ! |
---|
| 679 | !-- Listing of 1D-profiles |
---|
[151] | 680 | WRITE ( io, 325 ) dt_dopr_listing |
---|
[1] | 681 | IF ( averaging_interval_pr /= 0.0 ) THEN |
---|
[151] | 682 | WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr |
---|
[1] | 683 | ENDIF |
---|
| 684 | |
---|
| 685 | ! |
---|
| 686 | !-- DATA output |
---|
| 687 | WRITE ( io, 330 ) |
---|
| 688 | IF ( averaging_interval_pr /= 0.0 ) THEN |
---|
[151] | 689 | WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr |
---|
[1] | 690 | ENDIF |
---|
| 691 | |
---|
| 692 | ! |
---|
| 693 | !-- 1D-profiles |
---|
[346] | 694 | dopr_chr = 'Profile:' |
---|
[1] | 695 | IF ( dopr_n /= 0 ) THEN |
---|
| 696 | WRITE ( io, 331 ) |
---|
| 697 | |
---|
| 698 | output_format = '' |
---|
| 699 | IF ( netcdf_output ) THEN |
---|
| 700 | IF ( netcdf_64bit ) THEN |
---|
| 701 | output_format = 'netcdf (64 bit offset)' |
---|
| 702 | ELSE |
---|
| 703 | output_format = 'netcdf' |
---|
| 704 | ENDIF |
---|
| 705 | ENDIF |
---|
| 706 | IF ( profil_output ) THEN |
---|
| 707 | IF ( netcdf_output ) THEN |
---|
| 708 | output_format = TRIM( output_format ) // ' and profil' |
---|
| 709 | ELSE |
---|
| 710 | output_format = 'profil' |
---|
| 711 | ENDIF |
---|
| 712 | ENDIF |
---|
[292] | 713 | WRITE ( io, 344 ) output_format |
---|
[1] | 714 | |
---|
| 715 | DO i = 1, dopr_n |
---|
| 716 | dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ',' |
---|
| 717 | IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN |
---|
| 718 | WRITE ( io, 332 ) dopr_chr |
---|
| 719 | dopr_chr = ' :' |
---|
| 720 | ENDIF |
---|
| 721 | ENDDO |
---|
| 722 | |
---|
| 723 | IF ( dopr_chr /= '' ) THEN |
---|
| 724 | WRITE ( io, 332 ) dopr_chr |
---|
| 725 | ENDIF |
---|
| 726 | WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr |
---|
| 727 | IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr |
---|
| 728 | ENDIF |
---|
| 729 | |
---|
| 730 | ! |
---|
| 731 | !-- 2D-arrays |
---|
| 732 | DO av = 0, 1 |
---|
| 733 | |
---|
| 734 | i = 1 |
---|
| 735 | do2d_xy = '' |
---|
| 736 | do2d_xz = '' |
---|
| 737 | do2d_yz = '' |
---|
| 738 | DO WHILE ( do2d(av,i) /= ' ' ) |
---|
| 739 | |
---|
| 740 | l = MAX( 2, LEN_TRIM( do2d(av,i) ) ) |
---|
| 741 | do2d_mode = do2d(av,i)(l-1:l) |
---|
| 742 | |
---|
| 743 | SELECT CASE ( do2d_mode ) |
---|
| 744 | CASE ( 'xy' ) |
---|
| 745 | ll = LEN_TRIM( do2d_xy ) |
---|
| 746 | do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ',' |
---|
| 747 | CASE ( 'xz' ) |
---|
| 748 | ll = LEN_TRIM( do2d_xz ) |
---|
| 749 | do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ',' |
---|
| 750 | CASE ( 'yz' ) |
---|
| 751 | ll = LEN_TRIM( do2d_yz ) |
---|
| 752 | do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ',' |
---|
| 753 | END SELECT |
---|
| 754 | |
---|
| 755 | i = i + 1 |
---|
| 756 | |
---|
| 757 | ENDDO |
---|
| 758 | |
---|
| 759 | IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. & |
---|
| 760 | ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. & |
---|
| 761 | ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. & |
---|
| 762 | ( netcdf_output .OR. iso2d_output ) ) THEN |
---|
| 763 | |
---|
| 764 | IF ( av == 0 ) THEN |
---|
| 765 | WRITE ( io, 334 ) '' |
---|
| 766 | ELSE |
---|
| 767 | WRITE ( io, 334 ) '(time-averaged)' |
---|
| 768 | ENDIF |
---|
| 769 | |
---|
| 770 | IF ( do2d_at_begin ) THEN |
---|
| 771 | begin_chr = 'and at the start' |
---|
| 772 | ELSE |
---|
| 773 | begin_chr = '' |
---|
| 774 | ENDIF |
---|
| 775 | |
---|
| 776 | output_format = '' |
---|
| 777 | IF ( netcdf_output ) THEN |
---|
| 778 | IF ( netcdf_64bit ) THEN |
---|
| 779 | output_format = 'netcdf (64 bit offset)' |
---|
| 780 | ELSE |
---|
| 781 | output_format = 'netcdf' |
---|
| 782 | ENDIF |
---|
| 783 | ENDIF |
---|
| 784 | IF ( iso2d_output ) THEN |
---|
| 785 | IF ( netcdf_output ) THEN |
---|
| 786 | output_format = TRIM( output_format ) // ' and iso2d' |
---|
| 787 | ELSE |
---|
| 788 | output_format = 'iso2d' |
---|
| 789 | ENDIF |
---|
| 790 | ENDIF |
---|
[292] | 791 | WRITE ( io, 344 ) output_format |
---|
[1] | 792 | |
---|
| 793 | IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN |
---|
| 794 | i = 1 |
---|
| 795 | slices = '/' |
---|
| 796 | coordinates = '/' |
---|
| 797 | ! |
---|
| 798 | !-- Building strings with index and coordinate informations of the |
---|
| 799 | !-- slices |
---|
| 800 | DO WHILE ( section(i,1) /= -9999 ) |
---|
| 801 | |
---|
| 802 | WRITE (section_chr,'(I5)') section(i,1) |
---|
| 803 | section_chr = ADJUSTL( section_chr ) |
---|
| 804 | slices = TRIM( slices ) // TRIM( section_chr ) // '/' |
---|
| 805 | |
---|
[206] | 806 | IF ( section(i,1) == -1 ) THEN |
---|
| 807 | WRITE (coor_chr,'(F10.1)') -1.0 |
---|
| 808 | ELSE |
---|
| 809 | WRITE (coor_chr,'(F10.1)') zu(section(i,1)) |
---|
| 810 | ENDIF |
---|
[1] | 811 | coor_chr = ADJUSTL( coor_chr ) |
---|
| 812 | coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/' |
---|
| 813 | |
---|
| 814 | i = i + 1 |
---|
| 815 | ENDDO |
---|
| 816 | IF ( av == 0 ) THEN |
---|
| 817 | WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, & |
---|
| 818 | TRIM( begin_chr ), 'k', TRIM( slices ), & |
---|
| 819 | TRIM( coordinates ) |
---|
| 820 | IF ( skip_time_do2d_xy /= 0.0 ) THEN |
---|
| 821 | WRITE ( io, 339 ) skip_time_do2d_xy |
---|
| 822 | ENDIF |
---|
| 823 | ELSE |
---|
| 824 | WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, & |
---|
| 825 | TRIM( begin_chr ), averaging_interval, & |
---|
| 826 | dt_averaging_input, 'k', TRIM( slices ), & |
---|
| 827 | TRIM( coordinates ) |
---|
| 828 | IF ( skip_time_data_output_av /= 0.0 ) THEN |
---|
| 829 | WRITE ( io, 339 ) skip_time_data_output_av |
---|
| 830 | ENDIF |
---|
| 831 | ENDIF |
---|
| 832 | |
---|
| 833 | ENDIF |
---|
| 834 | |
---|
| 835 | IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN |
---|
| 836 | i = 1 |
---|
| 837 | slices = '/' |
---|
| 838 | coordinates = '/' |
---|
| 839 | ! |
---|
| 840 | !-- Building strings with index and coordinate informations of the |
---|
| 841 | !-- slices |
---|
| 842 | DO WHILE ( section(i,2) /= -9999 ) |
---|
| 843 | |
---|
| 844 | WRITE (section_chr,'(I5)') section(i,2) |
---|
| 845 | section_chr = ADJUSTL( section_chr ) |
---|
| 846 | slices = TRIM( slices ) // TRIM( section_chr ) // '/' |
---|
| 847 | |
---|
| 848 | WRITE (coor_chr,'(F10.1)') section(i,2) * dy |
---|
| 849 | coor_chr = ADJUSTL( coor_chr ) |
---|
| 850 | coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/' |
---|
| 851 | |
---|
| 852 | i = i + 1 |
---|
| 853 | ENDDO |
---|
| 854 | IF ( av == 0 ) THEN |
---|
| 855 | WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, & |
---|
| 856 | TRIM( begin_chr ), 'j', TRIM( slices ), & |
---|
| 857 | TRIM( coordinates ) |
---|
| 858 | IF ( skip_time_do2d_xz /= 0.0 ) THEN |
---|
| 859 | WRITE ( io, 339 ) skip_time_do2d_xz |
---|
| 860 | ENDIF |
---|
| 861 | ELSE |
---|
| 862 | WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, & |
---|
| 863 | TRIM( begin_chr ), averaging_interval, & |
---|
| 864 | dt_averaging_input, 'j', TRIM( slices ), & |
---|
| 865 | TRIM( coordinates ) |
---|
| 866 | IF ( skip_time_data_output_av /= 0.0 ) THEN |
---|
| 867 | WRITE ( io, 339 ) skip_time_data_output_av |
---|
| 868 | ENDIF |
---|
| 869 | ENDIF |
---|
| 870 | ENDIF |
---|
| 871 | |
---|
| 872 | IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN |
---|
| 873 | i = 1 |
---|
| 874 | slices = '/' |
---|
| 875 | coordinates = '/' |
---|
| 876 | ! |
---|
| 877 | !-- Building strings with index and coordinate informations of the |
---|
| 878 | !-- slices |
---|
| 879 | DO WHILE ( section(i,3) /= -9999 ) |
---|
| 880 | |
---|
| 881 | WRITE (section_chr,'(I5)') section(i,3) |
---|
| 882 | section_chr = ADJUSTL( section_chr ) |
---|
| 883 | slices = TRIM( slices ) // TRIM( section_chr ) // '/' |
---|
| 884 | |
---|
| 885 | WRITE (coor_chr,'(F10.1)') section(i,3) * dx |
---|
| 886 | coor_chr = ADJUSTL( coor_chr ) |
---|
| 887 | coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/' |
---|
| 888 | |
---|
| 889 | i = i + 1 |
---|
| 890 | ENDDO |
---|
| 891 | IF ( av == 0 ) THEN |
---|
| 892 | WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, & |
---|
| 893 | TRIM( begin_chr ), 'i', TRIM( slices ), & |
---|
| 894 | TRIM( coordinates ) |
---|
| 895 | IF ( skip_time_do2d_yz /= 0.0 ) THEN |
---|
| 896 | WRITE ( io, 339 ) skip_time_do2d_yz |
---|
| 897 | ENDIF |
---|
| 898 | ELSE |
---|
| 899 | WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, & |
---|
| 900 | TRIM( begin_chr ), averaging_interval, & |
---|
| 901 | dt_averaging_input, 'i', TRIM( slices ), & |
---|
| 902 | TRIM( coordinates ) |
---|
| 903 | IF ( skip_time_data_output_av /= 0.0 ) THEN |
---|
| 904 | WRITE ( io, 339 ) skip_time_data_output_av |
---|
| 905 | ENDIF |
---|
| 906 | ENDIF |
---|
| 907 | ENDIF |
---|
| 908 | |
---|
| 909 | ENDIF |
---|
| 910 | |
---|
| 911 | ENDDO |
---|
| 912 | |
---|
| 913 | ! |
---|
| 914 | !-- 3d-arrays |
---|
| 915 | DO av = 0, 1 |
---|
| 916 | |
---|
| 917 | i = 1 |
---|
| 918 | do3d_chr = '' |
---|
| 919 | DO WHILE ( do3d(av,i) /= ' ' ) |
---|
| 920 | |
---|
| 921 | do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ',' |
---|
| 922 | i = i + 1 |
---|
| 923 | |
---|
| 924 | ENDDO |
---|
| 925 | |
---|
| 926 | IF ( do3d_chr /= '' ) THEN |
---|
| 927 | IF ( av == 0 ) THEN |
---|
| 928 | WRITE ( io, 336 ) '' |
---|
| 929 | ELSE |
---|
| 930 | WRITE ( io, 336 ) '(time-averaged)' |
---|
| 931 | ENDIF |
---|
| 932 | |
---|
| 933 | output_format = '' |
---|
| 934 | IF ( netcdf_output ) THEN |
---|
[292] | 935 | IF ( netcdf_64bit_3d ) THEN |
---|
[1] | 936 | output_format = 'netcdf (64 bit offset)' |
---|
| 937 | ELSE |
---|
| 938 | output_format = 'netcdf' |
---|
| 939 | ENDIF |
---|
| 940 | ENDIF |
---|
| 941 | IF ( avs_output ) THEN |
---|
| 942 | IF ( netcdf_output ) THEN |
---|
| 943 | output_format = TRIM( output_format ) // ' and avs' |
---|
| 944 | ELSE |
---|
| 945 | output_format = 'avs' |
---|
| 946 | ENDIF |
---|
| 947 | ENDIF |
---|
[292] | 948 | WRITE ( io, 344 ) output_format |
---|
[1] | 949 | |
---|
| 950 | IF ( do3d_at_begin ) THEN |
---|
| 951 | begin_chr = 'and at the start' |
---|
| 952 | ELSE |
---|
| 953 | begin_chr = '' |
---|
| 954 | ENDIF |
---|
| 955 | IF ( av == 0 ) THEN |
---|
| 956 | WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), & |
---|
| 957 | zu(nz_do3d), nz_do3d |
---|
| 958 | ELSE |
---|
| 959 | WRITE ( io, 343 ) do3d_chr, dt_data_output_av, & |
---|
| 960 | TRIM( begin_chr ), averaging_interval, & |
---|
| 961 | dt_averaging_input, zu(nz_do3d), nz_do3d |
---|
| 962 | ENDIF |
---|
| 963 | |
---|
| 964 | IF ( do3d_compress ) THEN |
---|
| 965 | do3d_chr = '' |
---|
| 966 | i = 1 |
---|
| 967 | DO WHILE ( do3d(av,i) /= ' ' ) |
---|
| 968 | |
---|
| 969 | SELECT CASE ( do3d(av,i) ) |
---|
| 970 | CASE ( 'u' ) |
---|
| 971 | j = 1 |
---|
| 972 | CASE ( 'v' ) |
---|
| 973 | j = 2 |
---|
| 974 | CASE ( 'w' ) |
---|
| 975 | j = 3 |
---|
| 976 | CASE ( 'p' ) |
---|
| 977 | j = 4 |
---|
| 978 | CASE ( 'pt' ) |
---|
| 979 | j = 5 |
---|
| 980 | END SELECT |
---|
| 981 | WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision |
---|
| 982 | do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // & |
---|
| 983 | ':' // prec // ',' |
---|
| 984 | i = i + 1 |
---|
| 985 | |
---|
| 986 | ENDDO |
---|
| 987 | WRITE ( io, 338 ) do3d_chr |
---|
| 988 | |
---|
| 989 | ENDIF |
---|
| 990 | |
---|
| 991 | IF ( av == 0 ) THEN |
---|
| 992 | IF ( skip_time_do3d /= 0.0 ) THEN |
---|
| 993 | WRITE ( io, 339 ) skip_time_do3d |
---|
| 994 | ENDIF |
---|
| 995 | ELSE |
---|
| 996 | IF ( skip_time_data_output_av /= 0.0 ) THEN |
---|
| 997 | WRITE ( io, 339 ) skip_time_data_output_av |
---|
| 998 | ENDIF |
---|
| 999 | ENDIF |
---|
| 1000 | |
---|
| 1001 | ENDIF |
---|
| 1002 | |
---|
| 1003 | ENDDO |
---|
| 1004 | |
---|
| 1005 | ! |
---|
[410] | 1006 | !-- masked arrays |
---|
| 1007 | IF ( masks > 0 ) WRITE ( io, 345 ) & |
---|
| 1008 | mask_scale_x, mask_scale_y, mask_scale_z |
---|
| 1009 | DO mid = 1, masks |
---|
| 1010 | DO av = 0, 1 |
---|
| 1011 | |
---|
| 1012 | i = 1 |
---|
| 1013 | domask_chr = '' |
---|
| 1014 | DO WHILE ( domask(mid,av,i) /= ' ' ) |
---|
| 1015 | domask_chr = TRIM( domask_chr ) // ' ' // & |
---|
| 1016 | TRIM( domask(mid,av,i) ) // ',' |
---|
| 1017 | i = i + 1 |
---|
| 1018 | ENDDO |
---|
| 1019 | |
---|
| 1020 | IF ( domask_chr /= '' ) THEN |
---|
| 1021 | IF ( av == 0 ) THEN |
---|
| 1022 | WRITE ( io, 346 ) '', mid |
---|
| 1023 | ELSE |
---|
| 1024 | WRITE ( io, 346 ) ' (time-averaged)', mid |
---|
| 1025 | ENDIF |
---|
| 1026 | |
---|
| 1027 | output_format = '' |
---|
| 1028 | IF ( netcdf_output ) THEN |
---|
| 1029 | SELECT CASE ( nc_format_mask(mid,av) ) |
---|
| 1030 | CASE ( 1 ) |
---|
| 1031 | output_format = 'netcdf (classic format)' |
---|
| 1032 | CASE ( 2 ) |
---|
| 1033 | output_format = 'netcdf (64bit offset format)' |
---|
| 1034 | CASE ( 3 ) |
---|
| 1035 | output_format = 'netcdf (NetCDF 4 format)' |
---|
| 1036 | CASE ( 4 ) |
---|
| 1037 | output_format = 'netcdf (NetCDF 4 classic model format)' |
---|
| 1038 | END SELECT |
---|
| 1039 | ENDIF |
---|
| 1040 | WRITE ( io, 344 ) output_format |
---|
| 1041 | |
---|
| 1042 | IF ( av == 0 ) THEN |
---|
| 1043 | WRITE ( io, 347 ) domask_chr, dt_domask(mid) |
---|
| 1044 | ELSE |
---|
| 1045 | WRITE ( io, 348 ) domask_chr, dt_data_output_av, & |
---|
| 1046 | averaging_interval, dt_averaging_input |
---|
| 1047 | ENDIF |
---|
| 1048 | |
---|
| 1049 | IF ( av == 0 ) THEN |
---|
| 1050 | IF ( skip_time_domask(mid) /= 0.0 ) THEN |
---|
| 1051 | WRITE ( io, 339 ) skip_time_domask(mid) |
---|
| 1052 | ENDIF |
---|
| 1053 | ELSE |
---|
| 1054 | IF ( skip_time_data_output_av /= 0.0 ) THEN |
---|
| 1055 | WRITE ( io, 339 ) skip_time_data_output_av |
---|
| 1056 | ENDIF |
---|
| 1057 | ENDIF |
---|
| 1058 | ! |
---|
| 1059 | !-- output locations |
---|
| 1060 | DO dim = 1, 3 |
---|
| 1061 | IF ( mask(mid,dim,1) >= 0.0 ) THEN |
---|
| 1062 | count = 0 |
---|
| 1063 | DO WHILE ( mask(mid,dim,count+1) >= 0.0 ) |
---|
| 1064 | count = count + 1 |
---|
| 1065 | ENDDO |
---|
| 1066 | WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), & |
---|
| 1067 | mask(mid,dim,:count) |
---|
| 1068 | ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. & |
---|
| 1069 | mask_loop(mid,dim,2) < 0.0 .AND. & |
---|
| 1070 | mask_loop(mid,dim,3) == 0.0 ) THEN |
---|
| 1071 | WRITE ( io, 350 ) dir(dim), dir(dim) |
---|
| 1072 | ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN |
---|
| 1073 | WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), & |
---|
| 1074 | mask_loop(mid,dim,1:2) |
---|
| 1075 | ELSE |
---|
| 1076 | WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), & |
---|
| 1077 | mask_loop(mid,dim,1:3) |
---|
| 1078 | ENDIF |
---|
| 1079 | ENDDO |
---|
| 1080 | ENDIF |
---|
| 1081 | |
---|
| 1082 | ENDDO |
---|
| 1083 | ENDDO |
---|
| 1084 | |
---|
| 1085 | ! |
---|
[1] | 1086 | !-- Timeseries |
---|
| 1087 | IF ( dt_dots /= 9999999.9 ) THEN |
---|
| 1088 | WRITE ( io, 340 ) |
---|
| 1089 | |
---|
| 1090 | output_format = '' |
---|
| 1091 | IF ( netcdf_output ) THEN |
---|
| 1092 | IF ( netcdf_64bit ) THEN |
---|
| 1093 | output_format = 'netcdf (64 bit offset)' |
---|
| 1094 | ELSE |
---|
| 1095 | output_format = 'netcdf' |
---|
| 1096 | ENDIF |
---|
| 1097 | ENDIF |
---|
| 1098 | IF ( profil_output ) THEN |
---|
| 1099 | IF ( netcdf_output ) THEN |
---|
| 1100 | output_format = TRIM( output_format ) // ' and profil' |
---|
| 1101 | ELSE |
---|
| 1102 | output_format = 'profil' |
---|
| 1103 | ENDIF |
---|
| 1104 | ENDIF |
---|
[292] | 1105 | WRITE ( io, 344 ) output_format |
---|
[1] | 1106 | WRITE ( io, 341 ) dt_dots |
---|
| 1107 | ENDIF |
---|
| 1108 | |
---|
| 1109 | #if defined( __dvrp_graphics ) |
---|
| 1110 | ! |
---|
| 1111 | !-- Dvrp-output |
---|
| 1112 | IF ( dt_dvrp /= 9999999.9 ) THEN |
---|
| 1113 | WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), & |
---|
| 1114 | TRIM( dvrp_username ), TRIM( dvrp_directory ) |
---|
| 1115 | i = 1 |
---|
| 1116 | l = 0 |
---|
[336] | 1117 | m = 0 |
---|
[1] | 1118 | DO WHILE ( mode_dvrp(i) /= ' ' ) |
---|
| 1119 | IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN |
---|
[130] | 1120 | READ ( mode_dvrp(i), '(10X,I2)' ) j |
---|
[1] | 1121 | l = l + 1 |
---|
| 1122 | IF ( do3d(0,j) /= ' ' ) THEN |
---|
[336] | 1123 | WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), & |
---|
| 1124 | isosurface_color(:,l) |
---|
[1] | 1125 | ENDIF |
---|
| 1126 | ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN |
---|
[130] | 1127 | READ ( mode_dvrp(i), '(6X,I2)' ) j |
---|
[336] | 1128 | m = m + 1 |
---|
| 1129 | IF ( do2d(0,j) /= ' ' ) THEN |
---|
| 1130 | WRITE ( io, 362 ) TRIM( do2d(0,j) ), & |
---|
| 1131 | slicer_range_limits_dvrp(:,m) |
---|
| 1132 | ENDIF |
---|
[1] | 1133 | ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN |
---|
[336] | 1134 | WRITE ( io, 363 ) dvrp_psize |
---|
| 1135 | IF ( particle_dvrpsize /= 'none' ) THEN |
---|
| 1136 | WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), & |
---|
| 1137 | dvrpsize_interval |
---|
| 1138 | ENDIF |
---|
| 1139 | IF ( particle_color /= 'none' ) THEN |
---|
| 1140 | WRITE ( io, 364 ) 'color', TRIM( particle_color ), & |
---|
| 1141 | color_interval |
---|
| 1142 | ENDIF |
---|
[1] | 1143 | ENDIF |
---|
| 1144 | i = i + 1 |
---|
| 1145 | ENDDO |
---|
[237] | 1146 | |
---|
[336] | 1147 | WRITE ( io, 365 ) groundplate_color, superelevation_x, & |
---|
| 1148 | superelevation_y, superelevation, clip_dvrp_l, & |
---|
| 1149 | clip_dvrp_r, clip_dvrp_s, clip_dvrp_n |
---|
| 1150 | |
---|
| 1151 | IF ( TRIM( topography ) /= 'flat' ) THEN |
---|
| 1152 | WRITE ( io, 366 ) topography_color |
---|
| 1153 | IF ( cluster_size > 1 ) THEN |
---|
| 1154 | WRITE ( io, 367 ) cluster_size |
---|
| 1155 | ENDIF |
---|
[237] | 1156 | ENDIF |
---|
| 1157 | |
---|
[1] | 1158 | ENDIF |
---|
| 1159 | #endif |
---|
| 1160 | |
---|
| 1161 | #if defined( __spectra ) |
---|
| 1162 | ! |
---|
| 1163 | !-- Spectra output |
---|
| 1164 | IF ( dt_dosp /= 9999999.9 ) THEN |
---|
| 1165 | WRITE ( io, 370 ) |
---|
| 1166 | |
---|
| 1167 | output_format = '' |
---|
| 1168 | IF ( netcdf_output ) THEN |
---|
| 1169 | IF ( netcdf_64bit ) THEN |
---|
| 1170 | output_format = 'netcdf (64 bit offset)' |
---|
| 1171 | ELSE |
---|
| 1172 | output_format = 'netcdf' |
---|
| 1173 | ENDIF |
---|
| 1174 | ENDIF |
---|
| 1175 | IF ( profil_output ) THEN |
---|
| 1176 | IF ( netcdf_output ) THEN |
---|
| 1177 | output_format = TRIM( output_format ) // ' and profil' |
---|
| 1178 | ELSE |
---|
| 1179 | output_format = 'profil' |
---|
| 1180 | ENDIF |
---|
| 1181 | ENDIF |
---|
[292] | 1182 | WRITE ( io, 344 ) output_format |
---|
[1] | 1183 | WRITE ( io, 371 ) dt_dosp |
---|
| 1184 | IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp |
---|
| 1185 | WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), & |
---|
| 1186 | ( spectra_direction(i), i = 1,10 ), & |
---|
[189] | 1187 | ( comp_spectra_level(i), i = 1,100 ), & |
---|
| 1188 | ( plot_spectra_level(i), i = 1,100 ), & |
---|
[1] | 1189 | averaging_interval_sp, dt_averaging_input_pr |
---|
| 1190 | ENDIF |
---|
| 1191 | #endif |
---|
| 1192 | |
---|
| 1193 | WRITE ( io, 99 ) |
---|
| 1194 | |
---|
| 1195 | ! |
---|
| 1196 | !-- Physical quantities |
---|
| 1197 | WRITE ( io, 400 ) |
---|
| 1198 | |
---|
| 1199 | ! |
---|
| 1200 | !-- Geostrophic parameters |
---|
| 1201 | WRITE ( io, 410 ) omega, phi, f, fs |
---|
| 1202 | |
---|
| 1203 | ! |
---|
| 1204 | !-- Other quantities |
---|
| 1205 | WRITE ( io, 411 ) g |
---|
[97] | 1206 | IF ( use_reference ) THEN |
---|
| 1207 | IF ( ocean ) THEN |
---|
| 1208 | WRITE ( io, 412 ) prho_reference |
---|
| 1209 | ELSE |
---|
| 1210 | WRITE ( io, 413 ) pt_reference |
---|
| 1211 | ENDIF |
---|
| 1212 | ENDIF |
---|
[1] | 1213 | |
---|
| 1214 | ! |
---|
| 1215 | !-- Cloud physics parameters |
---|
| 1216 | IF ( cloud_physics ) THEN |
---|
[57] | 1217 | WRITE ( io, 415 ) |
---|
| 1218 | WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v |
---|
[1] | 1219 | ENDIF |
---|
| 1220 | |
---|
| 1221 | !-- Profile of the geostrophic wind (component ug) |
---|
| 1222 | !-- Building output strings |
---|
| 1223 | WRITE ( ugcomponent, '(F6.2)' ) ug_surface |
---|
| 1224 | gradients = '------' |
---|
| 1225 | slices = ' 0' |
---|
| 1226 | coordinates = ' 0.0' |
---|
| 1227 | i = 1 |
---|
| 1228 | DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1229 | |
---|
[167] | 1230 | WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i)) |
---|
[1] | 1231 | ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr ) |
---|
| 1232 | |
---|
[167] | 1233 | WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i) |
---|
[1] | 1234 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 1235 | |
---|
[167] | 1236 | WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i) |
---|
[1] | 1237 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 1238 | |
---|
[167] | 1239 | WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i) |
---|
[1] | 1240 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 1241 | |
---|
| 1242 | i = i + 1 |
---|
| 1243 | ENDDO |
---|
| 1244 | |
---|
| 1245 | WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), & |
---|
| 1246 | TRIM( gradients ), TRIM( slices ) |
---|
| 1247 | |
---|
| 1248 | !-- Profile of the geostrophic wind (component vg) |
---|
| 1249 | !-- Building output strings |
---|
| 1250 | WRITE ( vgcomponent, '(F6.2)' ) vg_surface |
---|
| 1251 | gradients = '------' |
---|
| 1252 | slices = ' 0' |
---|
| 1253 | coordinates = ' 0.0' |
---|
| 1254 | i = 1 |
---|
| 1255 | DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1256 | |
---|
[167] | 1257 | WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i)) |
---|
[1] | 1258 | vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr ) |
---|
| 1259 | |
---|
[167] | 1260 | WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i) |
---|
[1] | 1261 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 1262 | |
---|
[167] | 1263 | WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i) |
---|
[1] | 1264 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 1265 | |
---|
[167] | 1266 | WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i) |
---|
[1] | 1267 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 1268 | |
---|
| 1269 | i = i + 1 |
---|
| 1270 | ENDDO |
---|
| 1271 | |
---|
| 1272 | WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), & |
---|
| 1273 | TRIM( gradients ), TRIM( slices ) |
---|
| 1274 | |
---|
| 1275 | ! |
---|
| 1276 | !-- Initial temperature profile |
---|
| 1277 | !-- Building output strings, starting with surface temperature |
---|
| 1278 | WRITE ( temperatures, '(F6.2)' ) pt_surface |
---|
| 1279 | gradients = '------' |
---|
| 1280 | slices = ' 0' |
---|
| 1281 | coordinates = ' 0.0' |
---|
| 1282 | i = 1 |
---|
| 1283 | DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1284 | |
---|
[94] | 1285 | WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i)) |
---|
| 1286 | temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr ) |
---|
[1] | 1287 | |
---|
[94] | 1288 | WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i) |
---|
| 1289 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
[1] | 1290 | |
---|
[94] | 1291 | WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i) |
---|
| 1292 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
[1] | 1293 | |
---|
[94] | 1294 | WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i) |
---|
| 1295 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
[1] | 1296 | |
---|
| 1297 | i = i + 1 |
---|
| 1298 | ENDDO |
---|
| 1299 | |
---|
| 1300 | WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), & |
---|
| 1301 | TRIM( gradients ), TRIM( slices ) |
---|
| 1302 | |
---|
| 1303 | ! |
---|
| 1304 | !-- Initial humidity profile |
---|
| 1305 | !-- Building output strings, starting with surface humidity |
---|
[75] | 1306 | IF ( humidity .OR. passive_scalar ) THEN |
---|
[1] | 1307 | WRITE ( temperatures, '(E8.1)' ) q_surface |
---|
| 1308 | gradients = '--------' |
---|
| 1309 | slices = ' 0' |
---|
| 1310 | coordinates = ' 0.0' |
---|
| 1311 | i = 1 |
---|
| 1312 | DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1313 | |
---|
| 1314 | WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i)) |
---|
| 1315 | temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr ) |
---|
| 1316 | |
---|
| 1317 | WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i) |
---|
| 1318 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 1319 | |
---|
| 1320 | WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i) |
---|
| 1321 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 1322 | |
---|
| 1323 | WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i) |
---|
| 1324 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 1325 | |
---|
| 1326 | i = i + 1 |
---|
| 1327 | ENDDO |
---|
| 1328 | |
---|
[75] | 1329 | IF ( humidity ) THEN |
---|
[1] | 1330 | WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), & |
---|
| 1331 | TRIM( gradients ), TRIM( slices ) |
---|
| 1332 | ELSE |
---|
| 1333 | WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), & |
---|
| 1334 | TRIM( gradients ), TRIM( slices ) |
---|
| 1335 | ENDIF |
---|
| 1336 | ENDIF |
---|
| 1337 | |
---|
| 1338 | ! |
---|
[97] | 1339 | !-- Initial salinity profile |
---|
| 1340 | !-- Building output strings, starting with surface salinity |
---|
| 1341 | IF ( ocean ) THEN |
---|
| 1342 | WRITE ( temperatures, '(F6.2)' ) sa_surface |
---|
| 1343 | gradients = '------' |
---|
| 1344 | slices = ' 0' |
---|
| 1345 | coordinates = ' 0.0' |
---|
| 1346 | i = 1 |
---|
| 1347 | DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1348 | |
---|
| 1349 | WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i)) |
---|
| 1350 | temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr ) |
---|
| 1351 | |
---|
| 1352 | WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i) |
---|
| 1353 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 1354 | |
---|
| 1355 | WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i) |
---|
| 1356 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 1357 | |
---|
| 1358 | WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i) |
---|
| 1359 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 1360 | |
---|
| 1361 | i = i + 1 |
---|
| 1362 | ENDDO |
---|
| 1363 | |
---|
| 1364 | WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), & |
---|
| 1365 | TRIM( gradients ), TRIM( slices ) |
---|
| 1366 | ENDIF |
---|
| 1367 | |
---|
| 1368 | ! |
---|
[411] | 1369 | !-- Profile for the large scale vertial velocity |
---|
| 1370 | !-- Building output strings, starting with surface value |
---|
| 1371 | IF ( large_scale_subsidence ) THEN |
---|
| 1372 | temperatures = ' 0.0' |
---|
| 1373 | gradients = '------' |
---|
| 1374 | slices = ' 0' |
---|
| 1375 | coordinates = ' 0.0' |
---|
| 1376 | i = 1 |
---|
| 1377 | DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 ) |
---|
| 1378 | |
---|
| 1379 | WRITE (coor_chr,'(E10.2,7X)') & |
---|
| 1380 | w_subs(ws_vertical_gradient_level_ind(i)) |
---|
| 1381 | temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr ) |
---|
| 1382 | |
---|
| 1383 | WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i) |
---|
| 1384 | gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr ) |
---|
| 1385 | |
---|
| 1386 | WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i) |
---|
| 1387 | slices = TRIM( slices ) // ' ' // TRIM( coor_chr ) |
---|
| 1388 | |
---|
| 1389 | WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i) |
---|
| 1390 | coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr ) |
---|
| 1391 | |
---|
| 1392 | i = i + 1 |
---|
| 1393 | ENDDO |
---|
| 1394 | |
---|
| 1395 | WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), & |
---|
| 1396 | TRIM( gradients ), TRIM( slices ) |
---|
| 1397 | ENDIF |
---|
| 1398 | |
---|
| 1399 | ! |
---|
[1] | 1400 | !-- LES / turbulence parameters |
---|
| 1401 | WRITE ( io, 450 ) |
---|
| 1402 | |
---|
| 1403 | !-- |
---|
| 1404 | ! ... LES-constants used must still be added here |
---|
| 1405 | !-- |
---|
| 1406 | IF ( constant_diffusion ) THEN |
---|
| 1407 | WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, & |
---|
| 1408 | prandtl_number |
---|
| 1409 | ENDIF |
---|
| 1410 | IF ( .NOT. constant_diffusion) THEN |
---|
[108] | 1411 | IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init |
---|
[1] | 1412 | IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min |
---|
| 1413 | IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor |
---|
| 1414 | IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 ) |
---|
| 1415 | ENDIF |
---|
| 1416 | |
---|
| 1417 | ! |
---|
| 1418 | !-- Special actions during the run |
---|
| 1419 | WRITE ( io, 470 ) |
---|
| 1420 | IF ( create_disturbances ) THEN |
---|
| 1421 | WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, & |
---|
| 1422 | zu(disturbance_level_ind_b), disturbance_level_ind_b,& |
---|
| 1423 | zu(disturbance_level_ind_t), disturbance_level_ind_t |
---|
| 1424 | IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN |
---|
| 1425 | WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end |
---|
| 1426 | ELSE |
---|
| 1427 | WRITE ( io, 473 ) disturbance_energy_limit |
---|
| 1428 | ENDIF |
---|
| 1429 | WRITE ( io, 474 ) TRIM( random_generator ) |
---|
| 1430 | ENDIF |
---|
| 1431 | IF ( pt_surface_initial_change /= 0.0 ) THEN |
---|
| 1432 | WRITE ( io, 475 ) pt_surface_initial_change |
---|
| 1433 | ENDIF |
---|
[75] | 1434 | IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN |
---|
[1] | 1435 | WRITE ( io, 476 ) q_surface_initial_change |
---|
| 1436 | ENDIF |
---|
| 1437 | IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN |
---|
| 1438 | WRITE ( io, 477 ) q_surface_initial_change |
---|
| 1439 | ENDIF |
---|
| 1440 | |
---|
[60] | 1441 | IF ( particle_advection ) THEN |
---|
[1] | 1442 | ! |
---|
[60] | 1443 | !-- Particle attributes |
---|
| 1444 | WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, & |
---|
| 1445 | bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, & |
---|
[117] | 1446 | end_time_prel, dt_sort_particles |
---|
[60] | 1447 | IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part |
---|
| 1448 | IF ( random_start_position ) WRITE ( io, 481 ) |
---|
| 1449 | IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point |
---|
| 1450 | WRITE ( io, 495 ) total_number_of_particles |
---|
| 1451 | IF ( maximum_number_of_tailpoints /= 0 ) THEN |
---|
| 1452 | WRITE ( io, 483 ) maximum_number_of_tailpoints |
---|
| 1453 | IF ( minimum_tailpoint_distance /= 0 ) THEN |
---|
| 1454 | WRITE ( io, 484 ) total_number_of_tails, & |
---|
| 1455 | minimum_tailpoint_distance, & |
---|
| 1456 | maximum_tailpoint_age |
---|
| 1457 | ENDIF |
---|
[1] | 1458 | ENDIF |
---|
[60] | 1459 | IF ( dt_write_particle_data /= 9999999.9 ) THEN |
---|
| 1460 | WRITE ( io, 485 ) dt_write_particle_data |
---|
| 1461 | output_format = '' |
---|
| 1462 | IF ( netcdf_output ) THEN |
---|
| 1463 | IF ( netcdf_64bit ) THEN |
---|
| 1464 | output_format = 'netcdf (64 bit offset) and binary' |
---|
| 1465 | ELSE |
---|
| 1466 | output_format = 'netcdf and binary' |
---|
| 1467 | ENDIF |
---|
[1] | 1468 | ELSE |
---|
[60] | 1469 | output_format = 'binary' |
---|
[1] | 1470 | ENDIF |
---|
[292] | 1471 | WRITE ( io, 344 ) output_format |
---|
[1] | 1472 | ENDIF |
---|
[60] | 1473 | IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts |
---|
| 1474 | IF ( write_particle_statistics ) WRITE ( io, 486 ) |
---|
[1] | 1475 | |
---|
[60] | 1476 | WRITE ( io, 487 ) number_of_particle_groups |
---|
[1] | 1477 | |
---|
[60] | 1478 | DO i = 1, number_of_particle_groups |
---|
| 1479 | IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN |
---|
| 1480 | WRITE ( io, 490 ) i, 0.0 |
---|
| 1481 | WRITE ( io, 492 ) |
---|
[1] | 1482 | ELSE |
---|
[60] | 1483 | WRITE ( io, 490 ) i, radius(i) |
---|
| 1484 | IF ( density_ratio(i) /= 0.0 ) THEN |
---|
| 1485 | WRITE ( io, 491 ) density_ratio(i) |
---|
| 1486 | ELSE |
---|
| 1487 | WRITE ( io, 492 ) |
---|
| 1488 | ENDIF |
---|
[1] | 1489 | ENDIF |
---|
[60] | 1490 | WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), & |
---|
| 1491 | pdx(i), pdy(i), pdz(i) |
---|
[336] | 1492 | IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 ) |
---|
[60] | 1493 | ENDDO |
---|
[1] | 1494 | |
---|
[60] | 1495 | ENDIF |
---|
[1] | 1496 | |
---|
[60] | 1497 | |
---|
[1] | 1498 | ! |
---|
| 1499 | !-- Parameters of 1D-model |
---|
| 1500 | IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN |
---|
| 1501 | WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, & |
---|
| 1502 | mixing_length_1d, dissipation_1d |
---|
| 1503 | IF ( damp_level_ind_1d /= nzt+1 ) THEN |
---|
| 1504 | WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d |
---|
| 1505 | ENDIF |
---|
| 1506 | ENDIF |
---|
| 1507 | |
---|
| 1508 | ! |
---|
| 1509 | !-- User-defined informations |
---|
| 1510 | CALL user_header( io ) |
---|
| 1511 | |
---|
| 1512 | WRITE ( io, 99 ) |
---|
| 1513 | |
---|
| 1514 | ! |
---|
| 1515 | !-- Write buffer contents to disc immediately |
---|
[82] | 1516 | CALL local_flush( io ) |
---|
[1] | 1517 | |
---|
| 1518 | ! |
---|
| 1519 | !-- Here the FORMATs start |
---|
| 1520 | |
---|
| 1521 | 99 FORMAT (1X,78('-')) |
---|
[200] | 1522 | 100 FORMAT (/1X,'***************************',9X,42('-')/ & |
---|
| 1523 | 1X,'* ',A,' *',9X,A/ & |
---|
| 1524 | 1X,'***************************',9X,42('-')) |
---|
[291] | 1525 | 101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ & |
---|
[102] | 1526 | 37X,42('-')) |
---|
[200] | 1527 | 102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ & |
---|
| 1528 | ' Time: ',A8,9X,'Run-No.: ',I2.2/ & |
---|
| 1529 | ' Run on host: ',A10) |
---|
[1] | 1530 | #if defined( __parallel ) |
---|
[200] | 1531 | 103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, & |
---|
[1] | 1532 | ')',1X,A) |
---|
[200] | 1533 | 104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ & |
---|
[1] | 1534 | 37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A) |
---|
[102] | 1535 | 105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!') |
---|
| 1536 | 106 FORMAT (37X,'A 1d-decomposition along x is forced'/ & |
---|
[1] | 1537 | 37X,'because the job is running on an SMP-cluster') |
---|
[102] | 1538 | 107 FORMAT (37X,'A 1d-decomposition along ',A,' is used') |
---|
[1] | 1539 | #endif |
---|
| 1540 | 110 FORMAT (/' Numerical Schemes:'/ & |
---|
| 1541 | ' -----------------'/) |
---|
| 1542 | 111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines') |
---|
| 1543 | 112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ & |
---|
| 1544 | ' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3) |
---|
| 1545 | 113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', & |
---|
| 1546 | ' or Upstream') |
---|
| 1547 | 114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme') |
---|
| 1548 | 115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3) |
---|
| 1549 | 116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', & |
---|
| 1550 | ' or Upstream') |
---|
| 1551 | 117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme') |
---|
| 1552 | 118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme') |
---|
| 1553 | 119 FORMAT (' --> Galilei-Transform applied to horizontal advection', & |
---|
| 1554 | ' Translation velocity = ',A/ & |
---|
| 1555 | ' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)') |
---|
| 1556 | 120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', & |
---|
| 1557 | ' of timestep changes)') |
---|
| 1558 | 121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', & |
---|
| 1559 | ' timestep changes') |
---|
| 1560 | 122 FORMAT (' --> Time differencing scheme: ',A) |
---|
[108] | 1561 | 123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ & |
---|
[1] | 1562 | ' maximum damping coefficient: ',F5.3, ' 1/s') |
---|
| 1563 | 124 FORMAT (' Spline-overshoots are being suppressed') |
---|
| 1564 | 125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', & |
---|
| 1565 | ' of'/ & |
---|
| 1566 | ' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4) |
---|
| 1567 | 126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', & |
---|
| 1568 | ' of'/ & |
---|
| 1569 | ' delta_e = ',F6.4,4X,'delta_pt = ',F6.4) |
---|
| 1570 | 127 FORMAT (' The following absolute overshoot differences are tolerated:'/& |
---|
| 1571 | ' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4) |
---|
| 1572 | 128 FORMAT (' The following absolute overshoot differences are tolerated:'/& |
---|
| 1573 | ' delta_e = ',F6.4,4X,'delta_pt = ',F6.4) |
---|
| 1574 | 129 FORMAT (' --> Additional prognostic equation for the specific humidity') |
---|
| 1575 | 130 FORMAT (' --> Additional prognostic equation for the total water content') |
---|
| 1576 | 131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)') |
---|
| 1577 | 132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ & |
---|
| 1578 | ' effective emissivity scheme') |
---|
| 1579 | 133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme') |
---|
| 1580 | 134 FORMAT (' --> Additional prognostic equation for a passive scalar') |
---|
| 1581 | 135 FORMAT (' --> Solve perturbation pressure via multigrid method (', & |
---|
| 1582 | A,'-cycle)'/ & |
---|
| 1583 | ' number of grid levels: ',I2/ & |
---|
| 1584 | ' Gauss-Seidel red/black iterations: ',I2) |
---|
| 1585 | 136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', & |
---|
| 1586 | I3,')') |
---|
| 1587 | 137 FORMAT (' level data gathered on PE0 at level: ',I2/ & |
---|
| 1588 | ' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', & |
---|
| 1589 | I3,')'/ & |
---|
| 1590 | ' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', & |
---|
| 1591 | I3,')') |
---|
| 1592 | 138 FORMAT (' Using hybrid version for 1d-domain-decomposition') |
---|
[63] | 1593 | 139 FORMAT (' --> Loop optimization method: ',A) |
---|
[1] | 1594 | 140 FORMAT (' maximum residual allowed: ',E10.3) |
---|
| 1595 | 141 FORMAT (' fixed number of multigrid cycles: ',I4) |
---|
| 1596 | 142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', & |
---|
| 1597 | 'step') |
---|
[87] | 1598 | 143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', & |
---|
| 1599 | 'kinetic energy') |
---|
[1] | 1600 | 150 FORMAT (' --> Volume flow at the right and north boundary will be ', & |
---|
[241] | 1601 | 'conserved'/ & |
---|
| 1602 | ' using the ',A,' mode') |
---|
| 1603 | 151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s') |
---|
[306] | 1604 | 152 FORMAT (' --> External pressure gradient directly prescribed by the user:',& |
---|
| 1605 | /' ',2(1X,E12.5),'Pa/m in x/y direction', & |
---|
| 1606 | /' starting from dp_level_b =', F8.3, 'm', A /) |
---|
[411] | 1607 | 153 FORMAT (' --> Large-scale vertical motion is used in the ', & |
---|
| 1608 | 'prognostic equation for') |
---|
| 1609 | 154 FORMAT (' the potential temperature') |
---|
[1] | 1610 | 200 FORMAT (//' Run time and time step information:'/ & |
---|
| 1611 | ' ----------------------------------'/) |
---|
| 1612 | 201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', & |
---|
| 1613 | ' CFL-factor: ',F4.2) |
---|
| 1614 | 202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/) |
---|
| 1615 | 203 FORMAT ( ' Start time: ',F9.3,' s'/ & |
---|
| 1616 | ' End time: ',F9.3,' s') |
---|
| 1617 | 204 FORMAT ( A,F9.3,' s') |
---|
| 1618 | 205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s') |
---|
| 1619 | 206 FORMAT (/' Time reached: ',F9.3,' s'/ & |
---|
| 1620 | ' CPU-time used: ',F9.3,' s per timestep: ', & |
---|
| 1621 | ' ',F9.3,' s'/ & |
---|
| 1622 | ' per second of simulated tim', & |
---|
| 1623 | 'e: ',F9.3,' s') |
---|
[291] | 1624 | 207 FORMAT ( A/' Coupling start time:',F9.3,' s') |
---|
[1] | 1625 | 250 FORMAT (//' Computational grid and domain size:'/ & |
---|
| 1626 | ' ----------------------------------'// & |
---|
| 1627 | ' Grid length: dx = ',F7.3,' m dy = ',F7.3, & |
---|
| 1628 | ' m dz = ',F7.3,' m'/ & |
---|
| 1629 | ' Domain size: x = ',F10.3,' m y = ',F10.3, & |
---|
| 1630 | ' m z(u) = ',F10.3,' m'/) |
---|
| 1631 | 252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', & |
---|
| 1632 | ' factor: ',F5.3/ & |
---|
| 1633 | ' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/) |
---|
| 1634 | 254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ & |
---|
| 1635 | ' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/) |
---|
| 1636 | 255 FORMAT (' Subdomains have equal size') |
---|
| 1637 | 256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', & |
---|
| 1638 | 'have smaller sizes'/ & |
---|
| 1639 | ' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')') |
---|
| 1640 | 260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,& |
---|
| 1641 | ' degrees') |
---|
| 1642 | 270 FORMAT (//' Topography informations:'/ & |
---|
| 1643 | ' -----------------------'// & |
---|
| 1644 | 1X,'Topography: ',A) |
---|
| 1645 | 271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ & |
---|
| 1646 | ' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, & |
---|
| 1647 | ' / ',I4) |
---|
[240] | 1648 | 272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, & |
---|
| 1649 | ' direction' / & |
---|
| 1650 | ' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / & |
---|
| 1651 | ' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.') |
---|
[256] | 1652 | 278 FORMAT (' Topography grid definition convention:'/ & |
---|
| 1653 | ' cell edge (staggered grid points'/ & |
---|
| 1654 | ' (u in x-direction, v in y-direction))' /) |
---|
| 1655 | 279 FORMAT (' Topography grid definition convention:'/ & |
---|
| 1656 | ' cell center (scalar grid points)' /) |
---|
[138] | 1657 | 280 FORMAT (//' Vegetation canopy (drag) model:'/ & |
---|
| 1658 | ' ------------------------------'// & |
---|
| 1659 | ' Canopy mode: ', A / & |
---|
| 1660 | ' Canopy top: ',I4 / & |
---|
| 1661 | ' Leaf drag coefficient: ',F6.2 /) |
---|
[153] | 1662 | 281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / & |
---|
| 1663 | ' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /) |
---|
| 1664 | 282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s') |
---|
| 1665 | 283 FORMAT (/ ' Characteristic levels of the leaf area density:'// & |
---|
[138] | 1666 | ' Height: ',A,' m'/ & |
---|
| 1667 | ' Leaf area density: ',A,' m**2/m**3'/ & |
---|
| 1668 | ' Gradient: ',A,' m**2/m**4'/ & |
---|
| 1669 | ' Gridpoint: ',A) |
---|
| 1670 | |
---|
[1] | 1671 | 300 FORMAT (//' Boundary conditions:'/ & |
---|
| 1672 | ' -------------------'// & |
---|
| 1673 | ' p uv ', & |
---|
| 1674 | ' pt'// & |
---|
| 1675 | ' B. bound.: ',A/ & |
---|
| 1676 | ' T. bound.: ',A) |
---|
[97] | 1677 | 301 FORMAT (/' ',A// & |
---|
[1] | 1678 | ' B. bound.: ',A/ & |
---|
| 1679 | ' T. bound.: ',A) |
---|
[19] | 1680 | 303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1') |
---|
| 1681 | 304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt') |
---|
| 1682 | 305 FORMAT (//' Prandtl-Layer between bottom surface and first ', & |
---|
| 1683 | 'computational u,v-level:'// & |
---|
[1] | 1684 | ' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ & |
---|
| 1685 | ' Rif value range: ',F6.2,' <= rif <=',F6.2) |
---|
[97] | 1686 | 306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s') |
---|
[1] | 1687 | 307 FORMAT (' Heatflux has a random normal distribution') |
---|
| 1688 | 308 FORMAT (' Predefined surface temperature') |
---|
[97] | 1689 | 309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s') |
---|
[1] | 1690 | 310 FORMAT (//' 1D-Model:'// & |
---|
| 1691 | ' Rif value range: ',F6.2,' <= rif <=',F6.2) |
---|
| 1692 | 311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s') |
---|
| 1693 | 312 FORMAT (' Predefined surface humidity') |
---|
| 1694 | 313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)') |
---|
| 1695 | 314 FORMAT (' Predefined scalar value at the surface') |
---|
[19] | 1696 | 315 FORMAT (' Humidity / scalar flux at top surface is 0.0') |
---|
[102] | 1697 | 316 FORMAT (' Sensible heatflux and momentum flux from coupled ', & |
---|
| 1698 | 'atmosphere model') |
---|
[1] | 1699 | 317 FORMAT (//' Lateral boundaries:'/ & |
---|
| 1700 | ' left/right: ',A/ & |
---|
| 1701 | ' north/south: ',A) |
---|
| 1702 | 318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', & |
---|
| 1703 | 'max =',F5.1,' m**2/s') |
---|
[151] | 1704 | 319 FORMAT (' turbulence recycling at inflow switched on'/ & |
---|
| 1705 | ' width of recycling domain: ',F7.1,' m grid index: ',I4/ & |
---|
| 1706 | ' inflow damping height: ',F6.1,' m width: ',F6.1,' m') |
---|
| 1707 | 320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m**2/s**2'/ & |
---|
[103] | 1708 | ' v: ',F9.6,' m**2/s**2') |
---|
[151] | 1709 | 325 FORMAT (//' List output:'/ & |
---|
[1] | 1710 | ' -----------'// & |
---|
| 1711 | ' 1D-Profiles:'/ & |
---|
| 1712 | ' Output every ',F8.2,' s') |
---|
[151] | 1713 | 326 FORMAT (' Time averaged over ',F8.2,' s'/ & |
---|
[1] | 1714 | ' Averaging input every ',F8.2,' s') |
---|
| 1715 | 330 FORMAT (//' Data output:'/ & |
---|
| 1716 | ' -----------'/) |
---|
| 1717 | 331 FORMAT (/' 1D-Profiles:') |
---|
| 1718 | 332 FORMAT (/' ',A) |
---|
| 1719 | 333 FORMAT (' Output every ',F8.2,' s',/ & |
---|
| 1720 | ' Time averaged over ',F8.2,' s'/ & |
---|
| 1721 | ' Averaging input every ',F8.2,' s') |
---|
| 1722 | 334 FORMAT (/' 2D-Arrays',A,':') |
---|
| 1723 | 335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ & |
---|
| 1724 | ' Output every ',F8.2,' s ',A/ & |
---|
| 1725 | ' Cross sections at ',A1,' = ',A/ & |
---|
| 1726 | ' scalar-coordinates: ',A,' m'/) |
---|
| 1727 | 336 FORMAT (/' 3D-Arrays',A,':') |
---|
| 1728 | 337 FORMAT (/' Arrays: ',A/ & |
---|
| 1729 | ' Output every ',F8.2,' s ',A/ & |
---|
| 1730 | ' Upper output limit at ',F8.2,' m (GP ',I4,')'/) |
---|
| 1731 | 338 FORMAT (' Compressed data output'/ & |
---|
| 1732 | ' Decimal precision: ',A/) |
---|
| 1733 | 339 FORMAT (' No output during initial ',F8.2,' s') |
---|
| 1734 | 340 FORMAT (/' Time series:') |
---|
| 1735 | 341 FORMAT (' Output every ',F8.2,' s'/) |
---|
| 1736 | 342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ & |
---|
| 1737 | ' Output every ',F8.2,' s ',A/ & |
---|
| 1738 | ' Time averaged over ',F8.2,' s'/ & |
---|
| 1739 | ' Averaging input every ',F8.2,' s'/ & |
---|
| 1740 | ' Cross sections at ',A1,' = ',A/ & |
---|
| 1741 | ' scalar-coordinates: ',A,' m'/) |
---|
| 1742 | 343 FORMAT (/' Arrays: ',A/ & |
---|
| 1743 | ' Output every ',F8.2,' s ',A/ & |
---|
| 1744 | ' Time averaged over ',F8.2,' s'/ & |
---|
| 1745 | ' Averaging input every ',F8.2,' s'/ & |
---|
| 1746 | ' Upper output limit at ',F8.2,' m (GP ',I4,')'/) |
---|
[292] | 1747 | 344 FORMAT (' Output format: ',A/) |
---|
[410] | 1748 | 345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ & |
---|
| 1749 | ' mask_scale_x (in x-direction): ',F9.3, ' m',/ & |
---|
| 1750 | ' mask_scale_y (in y-direction): ',F9.3, ' m',/ & |
---|
| 1751 | ' mask_scale_z (in z-direction): ',F9.3, ' m' ) |
---|
| 1752 | 346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':') |
---|
| 1753 | 347 FORMAT (' Variables: ',A/ & |
---|
| 1754 | ' Output every ',F8.2,' s') |
---|
| 1755 | 348 FORMAT (' Variables: ',A/ & |
---|
| 1756 | ' Output every ',F8.2,' s'/ & |
---|
| 1757 | ' Time averaged over ',F8.2,' s'/ & |
---|
| 1758 | ' Averaging input every ',F8.2,' s') |
---|
| 1759 | 349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', & |
---|
| 1760 | 'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ & |
---|
| 1761 | 13(' ',8(F8.2,',')/) ) |
---|
| 1762 | 350 FORMAT (/' Output locations in ',A,'-direction: ', & |
---|
| 1763 | 'all gridpoints along ',A,'-direction (default).' ) |
---|
| 1764 | 351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', & |
---|
| 1765 | 'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ & |
---|
| 1766 | ' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 ) |
---|
[1] | 1767 | #if defined( __dvrp_graphics ) |
---|
| 1768 | 360 FORMAT (' Plot-Sequence with dvrp-software:'/ & |
---|
| 1769 | ' Output every ',F7.1,' s'/ & |
---|
| 1770 | ' Output mode: ',A/ & |
---|
| 1771 | ' Host / User: ',A,' / ',A/ & |
---|
| 1772 | ' Directory: ',A// & |
---|
| 1773 | ' The sequence contains:') |
---|
[337] | 1774 | 361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ & |
---|
| 1775 | ' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)') |
---|
| 1776 | 362 FORMAT (/' Slicer plane ',A/ & |
---|
[336] | 1777 | ' Slicer limits: [',F6.2,',',F6.2,']') |
---|
[337] | 1778 | 363 FORMAT (/' Particles'/ & |
---|
[336] | 1779 | ' particle size: ',F7.2,' m') |
---|
| 1780 | 364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', & |
---|
| 1781 | F6.2,',',F6.2,']') |
---|
[337] | 1782 | 365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ & |
---|
[336] | 1783 | ' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, & |
---|
| 1784 | ')'/ & |
---|
| 1785 | ' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ & |
---|
| 1786 | ' from y = ',F9.1,' m to y = ',F9.1,' m') |
---|
[337] | 1787 | 366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)') |
---|
[336] | 1788 | 367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1) |
---|
[1] | 1789 | #endif |
---|
| 1790 | #if defined( __spectra ) |
---|
| 1791 | 370 FORMAT (' Spectra:') |
---|
| 1792 | 371 FORMAT (' Output every ',F7.1,' s'/) |
---|
| 1793 | 372 FORMAT (' Arrays: ', 10(A5,',')/ & |
---|
| 1794 | ' Directions: ', 10(A5,',')/ & |
---|
[189] | 1795 | ' height levels k = ', 20(I3,',')/ & |
---|
| 1796 | ' ', 20(I3,',')/ & |
---|
| 1797 | ' ', 20(I3,',')/ & |
---|
| 1798 | ' ', 20(I3,',')/ & |
---|
| 1799 | ' ', 19(I3,','),I3,'.'/ & |
---|
[1] | 1800 | ' height levels selected for standard plot:'/ & |
---|
[189] | 1801 | ' k = ', 20(I3,',')/ & |
---|
| 1802 | ' ', 20(I3,',')/ & |
---|
| 1803 | ' ', 20(I3,',')/ & |
---|
| 1804 | ' ', 20(I3,',')/ & |
---|
| 1805 | ' ', 19(I3,','),I3,'.'/ & |
---|
[1] | 1806 | ' Time averaged over ', F7.1, ' s,' / & |
---|
| 1807 | ' Profiles for the time averaging are taken every ', & |
---|
| 1808 | F6.1,' s') |
---|
| 1809 | #endif |
---|
| 1810 | 400 FORMAT (//' Physical quantities:'/ & |
---|
| 1811 | ' -------------------'/) |
---|
| 1812 | 410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ & |
---|
| 1813 | ' Geograph. latitude : phi = ',F4.1,' degr'/ & |
---|
| 1814 | ' Coriolis parameter : f = ',F9.6,' 1/s'/ & |
---|
| 1815 | ' f* = ',F9.6,' 1/s') |
---|
| 1816 | 411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2') |
---|
[97] | 1817 | 412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3') |
---|
| 1818 | 413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K') |
---|
[57] | 1819 | 415 FORMAT (/' Cloud physics parameters:'/ & |
---|
[1] | 1820 | ' ------------------------'/) |
---|
[57] | 1821 | 416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ & |
---|
[1] | 1822 | ' Gas constant : R = ',F5.1,' J/(kg K)'/ & |
---|
| 1823 | ' Density of air : rho_0 = ',F5.3,' kg/m**3'/ & |
---|
| 1824 | ' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ & |
---|
| 1825 | ' Vapourization heat : L_v = ',E8.2,' J/kg') |
---|
| 1826 | 420 FORMAT (/' Characteristic levels of the initial temperature profile:'// & |
---|
| 1827 | ' Height: ',A,' m'/ & |
---|
| 1828 | ' Temperature: ',A,' K'/ & |
---|
| 1829 | ' Gradient: ',A,' K/100m'/ & |
---|
| 1830 | ' Gridpoint: ',A) |
---|
| 1831 | 421 FORMAT (/' Characteristic levels of the initial humidity profile:'// & |
---|
| 1832 | ' Height: ',A,' m'/ & |
---|
| 1833 | ' Humidity: ',A,' kg/kg'/ & |
---|
| 1834 | ' Gradient: ',A,' (kg/kg)/100m'/ & |
---|
| 1835 | ' Gridpoint: ',A) |
---|
| 1836 | 422 FORMAT (/' Characteristic levels of the initial scalar profile:'// & |
---|
| 1837 | ' Height: ',A,' m'/ & |
---|
| 1838 | ' Scalar concentration: ',A,' kg/m**3'/ & |
---|
| 1839 | ' Gradient: ',A,' (kg/m**3)/100m'/ & |
---|
| 1840 | ' Gridpoint: ',A) |
---|
| 1841 | 423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// & |
---|
| 1842 | ' Height: ',A,' m'/ & |
---|
| 1843 | ' ug: ',A,' m/s'/ & |
---|
| 1844 | ' Gradient: ',A,' 1/100s'/ & |
---|
| 1845 | ' Gridpoint: ',A) |
---|
| 1846 | 424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// & |
---|
| 1847 | ' Height: ',A,' m'/ & |
---|
[97] | 1848 | ' vg: ',A,' m/s'/ & |
---|
[1] | 1849 | ' Gradient: ',A,' 1/100s'/ & |
---|
| 1850 | ' Gridpoint: ',A) |
---|
[97] | 1851 | 425 FORMAT (/' Characteristic levels of the initial salinity profile:'// & |
---|
| 1852 | ' Height: ',A,' m'/ & |
---|
| 1853 | ' Salinity: ',A,' psu'/ & |
---|
| 1854 | ' Gradient: ',A,' psu/100m'/ & |
---|
| 1855 | ' Gridpoint: ',A) |
---|
[411] | 1856 | 426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// & |
---|
| 1857 | ' Height: ',A,' m'/ & |
---|
| 1858 | ' w_subs: ',A,' m/s'/ & |
---|
| 1859 | ' Gradient: ',A,' (m/s)/100m'/ & |
---|
| 1860 | ' Gridpoint: ',A) |
---|
[1] | 1861 | 450 FORMAT (//' LES / Turbulence quantities:'/ & |
---|
| 1862 | ' ---------------------------'/) |
---|
| 1863 | 451 FORMAT (' Diffusion coefficients are constant:'/ & |
---|
| 1864 | ' Km = ',F6.2,' m**2/s Kh = ',F6.2,' m**2/s Pr = ',F5.2) |
---|
| 1865 | 452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.') |
---|
| 1866 | 453 FORMAT (' Mixing length is limited to ',F4.2,' * z') |
---|
| 1867 | 454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2') |
---|
[108] | 1868 | 455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2') |
---|
[1] | 1869 | 470 FORMAT (//' Actions during the simulation:'/ & |
---|
| 1870 | ' -----------------------------'/) |
---|
[94] | 1871 | 471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ & |
---|
| 1872 | ' Disturbance amplitude : ',F4.2, ' m/s'/ & |
---|
| 1873 | ' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ & |
---|
| 1874 | ' Upper disturbance level : ',F8.2,' m (GP ',I4,')') |
---|
[1] | 1875 | 472 FORMAT (' Disturbances continued during the run from i/j =',I4, & |
---|
| 1876 | ' to i/j =',I4) |
---|
| 1877 | 473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',& |
---|
| 1878 | 1X,F5.3, ' m**2/s**2') |
---|
| 1879 | 474 FORMAT (' Random number generator used : ',A/) |
---|
| 1880 | 475 FORMAT (' The surface temperature is increased (or decreased, ', & |
---|
| 1881 | 'respectively, if'/ & |
---|
| 1882 | ' the value is negative) by ',F5.2,' K at the beginning of the',& |
---|
| 1883 | ' 3D-simulation'/) |
---|
| 1884 | 476 FORMAT (' The surface humidity is increased (or decreased, ',& |
---|
| 1885 | 'respectively, if the'/ & |
---|
| 1886 | ' value is negative) by ',E8.1,' kg/kg at the beginning of', & |
---|
| 1887 | ' the 3D-simulation'/) |
---|
| 1888 | 477 FORMAT (' The scalar value is increased at the surface (or decreased, ',& |
---|
| 1889 | 'respectively, if the'/ & |
---|
| 1890 | ' value is negative) by ',E8.1,' kg/m**3 at the beginning of', & |
---|
| 1891 | ' the 3D-simulation'/) |
---|
| 1892 | 480 FORMAT (' Particles:'/ & |
---|
| 1893 | ' ---------'// & |
---|
| 1894 | ' Particle advection is active (switched on at t = ', F7.1, & |
---|
| 1895 | ' s)'/ & |
---|
| 1896 | ' Start of new particle generations every ',F6.1,' s'/ & |
---|
| 1897 | ' Boundary conditions: left/right: ', A, ' north/south: ', A/& |
---|
| 1898 | ' bottom: ', A, ' top: ', A/& |
---|
| 1899 | ' Maximum particle age: ',F9.1,' s'/ & |
---|
[117] | 1900 | ' Advection stopped at t = ',F9.1,' s'/ & |
---|
| 1901 | ' Particles are sorted every ',F9.1,' s'/) |
---|
[1] | 1902 | 481 FORMAT (' Particles have random start positions'/) |
---|
[336] | 1903 | 482 FORMAT (' Particles are advected only horizontally'/) |
---|
[1] | 1904 | 483 FORMAT (' Particles have tails with a maximum of ',I3,' points') |
---|
| 1905 | 484 FORMAT (' Number of tails of the total domain: ',I10/ & |
---|
| 1906 | ' Minimum distance between tailpoints: ',F8.2,' m'/ & |
---|
| 1907 | ' Maximum age of the end of the tail: ',F8.2,' s') |
---|
| 1908 | 485 FORMAT (' Particle data are written on file every ', F9.1, ' s') |
---|
| 1909 | 486 FORMAT (' Particle statistics are written on file'/) |
---|
| 1910 | 487 FORMAT (' Number of particle groups: ',I2/) |
---|
| 1911 | 488 FORMAT (' SGS velocity components are used for particle advection'/ & |
---|
| 1912 | ' minimum timestep for advection: ', F7.5/) |
---|
| 1913 | 489 FORMAT (' Number of particles simultaneously released at each ', & |
---|
| 1914 | 'point: ', I5/) |
---|
| 1915 | 490 FORMAT (' Particle group ',I2,':'/ & |
---|
| 1916 | ' Particle radius: ',E10.3, 'm') |
---|
| 1917 | 491 FORMAT (' Particle inertia is activated'/ & |
---|
| 1918 | ' density_ratio (rho_fluid/rho_particle) = ',F5.3/) |
---|
| 1919 | 492 FORMAT (' Particles are advected only passively (no inertia)'/) |
---|
| 1920 | 493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/& |
---|
| 1921 | ' y:',F8.1,' - ',F8.1,' m'/& |
---|
| 1922 | ' z:',F8.1,' - ',F8.1,' m'/& |
---|
| 1923 | ' Particle distances: dx = ',F8.1,' m dy = ',F8.1, & |
---|
| 1924 | ' m dz = ',F8.1,' m'/) |
---|
| 1925 | 494 FORMAT (' Output of particle time series in NetCDF format every ', & |
---|
| 1926 | F8.2,' s'/) |
---|
| 1927 | 495 FORMAT (' Number of particles in total domain: ',I10/) |
---|
| 1928 | 500 FORMAT (//' 1D-Model parameters:'/ & |
---|
| 1929 | ' -------------------'// & |
---|
| 1930 | ' Simulation time: ',F8.1,' s'/ & |
---|
| 1931 | ' Run-controll output every: ',F8.1,' s'/ & |
---|
| 1932 | ' Vertical profile output every: ',F8.1,' s'/ & |
---|
| 1933 | ' Mixing length calculation: ',A/ & |
---|
| 1934 | ' Dissipation calculation: ',A/) |
---|
| 1935 | 502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/) |
---|
| 1936 | |
---|
| 1937 | |
---|
| 1938 | END SUBROUTINE header |
---|