Home

Context Navigation

header.f90 @ 403

Last change on this file since 403 was 392, checked in by raasch, 15 years ago

New:
---

Adapted for machine lck
(mrun, mbuild, subjob)

bc_lr/bc_ns in most subroutines replaced by LOGICAL variables bc_lr_cyc,
bc_ns_cyc for speed optimization
(check_parameters, diffusion_u, diffusion_v, diffusion_w, modules)

Additional timestep criterion in case of simulations with plant canopy (timestep)

Check for illegal entries in section_xy|xz|yz that exceed nz+1|ny+1|nx+1
(check_parameters)

Clipping of dvrp output implemented. Default colourtable for particles
implemented, particle attributes (color, dvrp_size) can be set with new
parameters particle_color, particle_dvrpsize, color_interval,
dvrpsize_interval (init_dvrp, data_output_dvrp, modules, user_data_output_dvrp).
Slicer attributes (dvrp) are set with new routine set_slicer_attributes_dvrp
and are controlled with existing parameters slicer_range_limits.
(set_slicer_attributes_dvrp)

Ocean atmosphere coupling allows to use independent precursor runs in order
to account for different spin-up times. The time when coupling has to be
started is given by new inipar parameter coupling_start_time. The precursor
ocean run has to be started using new mrun option "-y" in order to add
appendix "_O" to all output files.
(check_for_restart, check_parameters, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, header, init_coupling, modules, mrun,
parin, read_var_list, surface_coupler, time_integration, write_var_list)

Polygon reduction for topography and ground plate isosurface. Reduction level
for buildings can be chosen with parameter cluster_size. (init_dvrp)

External pressure gradient (check_parameters, header, init_3d_model, modules,
parin, prognostic_equations, read_var_list, write_var_list)

New topography case 'single_street_canyon' (header, init_grid, modules, parin,
read_var_list, user_check_parameters, user_header, user_init_grid, write_var_list)

Option to predefine a target bulk velocity for conserve_volume_flow
(check_parameters, header, init_3d_model, modules, parin, read_var_list,
write_var_list)

Option for user defined 2D data output in xy cross sections at z=nzb+1
(data_output_2d, user_data_output_2d)

xy cross section output of surface heatfluxes (latent, sensible)
(average_3d_data, check_parameters, data_output_2d, modules, read_3d_binary,
sum_up_3d_data, write_3d_binary)

average_3d_data, check_for_restart, check_parameters, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, init_coupling, init_dvrp, init_grid, init_3d_model, header, mbuild, modules, mrun, package_parin, parin, prognostic_equations, read_3d_binary, read_var_list, subjob, surface_coupler, timestep, time_integration, user_check_parameters, user_data_output_2d, user_data_output_dvrp, user_header, user_init_grid, write_3d_binary, write_var_list

New: set_particle_attributes, set_slicer_attributes_dvrp

Changed:

lcmuk changed to lc to avoid problems with Intel compiler on sgi-ice
(poisfft)

For extended NetCDF files, the updated title attribute includes an update of
time_average_text where appropriate. (netcdf)

In case of restart runs without extension, initial profiles are not written
to NetCDF-file anymore. (data_output_profiles, modules, read_var_list, write_var_list)

Small change in formatting of the message handling routine concering the output in the
job protocoll. (message)

initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now
independent of turbulent_inflow (check_parameters, header, init_3d_model)

2 NetCDF error numbers changed. (data_output_3d)

A Link to the website appendix_a.html is printed for further information
about the possible errors. (message)

Temperature gradient criterion for estimating the boundary layer height
replaced by the gradient criterion of Sullivan et al. (1998). (flow_statistics)

NetCDF unit attribute in timeseries output in case of statistic regions added
(netcdf)

Output of NetCDF messages with aid of message handling routine.
(check_open, close_file, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, netcdf, output_particles_netcdf)

Output of messages replaced by message handling routine.
(advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart,
check_open, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp,
data_output_profiles, data_output_spectra, fft_xy, flow_statistics, header,
init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid,
netcdf, parin, plant_canopy_model, poisfft_hybrid, poismg, read_3d_binary,
read_var_list, surface_coupler, temperton_fft, timestep, user_actions,
user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy,
user_parin, user_read_restart_data, user_spectra )

Maximum number of tails is calculated from maximum number of particles and
skip_particles_for_tail (init_particles)

Value of vertical_particle_advection may differ for each particle group
(advec_particles, header, modules)

First constant in array den also defined as type double. (eqn_state_seawater)

Parameter dvrp_psize moved from particles_par to dvrp_graphics_par. (package_parin)

topography_grid_convention moved from userpar to inipar (check_parameters,
header, parin, read_var_list, user_check_parameters, user_header,
user_init_grid, user_parin, write_var_list)

Default value of grid_matching changed to strict.

Adjustments for runs on lcxt4 (necessary due to an software update on CRAY) and
for coupled runs on ibmy (mrun, subjob)

advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart, check_open, check_parameters, close_file, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, eqn_state_seawater, fft_xy, flow_statistics, header, init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid, message, mrun, netcdf, output_particles_netcdf, package_parin, parin, plant_canopy_model, poisfft, poisfft_hybrid, poismg, read_3d_binary, read_var_list, sort_particles, subjob, user_check_parameters, user_header, user_init_grid, user_parin, surface_coupler, temperton_fft, timestep, user_actions, user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy, user_parin, user_read_restart_data, user_spectra, write_var_list

Errors:

Bugfix: Initial hydrostatic pressure profile in case of ocean runs is now
calculated in 5 iteration steps. (init_ocean)

Bugfix: wrong sign in buoyancy production of ocean part in case of not using
the reference density (only in 3D routine production_e) (production_e)

Bugfix: output of averaged 2d/3d quantities requires that an avaraging
interval has been set, respective error message is included (check_parameters)

Bugfix: Output on unit 14 only if requested by write_binary.
(user_last_actions)

Bugfix to avoid zero division by km_neutral (production_e)

Bugfix for extended NetCDF files: In order to avoid 'data mode' errors if
updated attributes are larger than their original size, NF90_PUT_ATT is called
in 'define mode' enclosed by NF90_REDEF and NF90_ENDDEF calls. This implies a
possible performance loss; an alternative strategy would be to ensure equal
attribute size in a job chain. (netcdf)

Bugfix: correction of initial volume flow for non-flat topography (init_3d_model)
Bugfix: zero initialization of arrays within buildings for 'cyclic_fill' (init_3d_model)

Bugfix: to_be_resorted => s_av for time-averaged scalars (data_output_2d, data_output_3d)

Bugfix: error in formatting the output (message)

Bugfix: avoid that ngp_2dh_s_inner becomes zero (init_3_model)

Typographical error: unit of wpt in dots_unit (modules)

Bugfix: error in check, if particles moved further than one subdomain length.
This check must not be applied for newly released particles. (advec_particles)

Bugfix: several tail counters are initialized, particle_tail_coordinates is
only written to file if its third index is > 0, arrays for tails are allocated
with a minimum size of 10 tails if there is no tail initially (init_particles,
advec_particles)

Bugfix: pressure included for profile output (check_parameters)

Bugfix: Type of count and count_rate changed to default INTEGER on NEC machines
(cpu_log)

Bugfix: output if particle time series only if particle advection is switched
on. (time_integration)

Bugfix: qsws was calculated in case of constant heatflux = .FALSE. (prandtl_fluxes)

Bugfix: averaging along z is not allowed for 2d quantities (e.g. u* and z0) (data_output_2d)

Typographical errors (netcdf)

If the inversion height calculated by the prerun is zero, inflow_damping_height
must be explicitly specified (init_3d_model)

Small bugfix concerning 3d 64bit netcdf output format (header)

Bugfix: dt_fixed removed from the restart file, because otherwise, no change
from a fixed to a variable timestep would be possible in restart runs.
(read_var_list, write_var_list)

Bugfix: initial setting of time_coupling in coupled restart runs (time_integration)

advec_particles, check_parameters, cpu_log, data_output_2d, data_output_3d, header, init_3d_model, init_particles, init_ocean, modules, netcdf, prandtl_fluxes, production_e, read_var_list, time_integration, user_last_actions, write_var_list

Property svn:keywords set to Id

File size: 69.1 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 392 2009-09-24 10:39:14Z franke $
	11	!
	12	! 346 2009-07-06 10:13:41Z raasch
[328]	13	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	14	! Coupling with independent precursor runs.
[254]	15	! Output of messages replaced by message handling routine.
[336]	16	! Output of several additional dvr parameters
[240]	17	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	18	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	19	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	20	! topography_grid_convention moved from user_header
[292]	21	! small bugfix concerning 3d 64bit netcdf output format
[1]	22	!
[226]	23	! 206 2008-10-13 14:59:11Z raasch
	24	! Bugfix: error in zu index in case of section_xy = -1
	25	!
[200]	26	! 198 2008-09-17 08:55:28Z raasch
	27	! Format adjustments allowing output of larger revision numbers
	28	!
[198]	29	! 197 2008-09-16 15:29:03Z raasch
	30	! allow 100 spectra levels instead of 10 for consistency with
	31	! define_netcdf_header,
	32	! bugfix in the output of the characteristic levels of potential temperature,
	33	! geostrophic wind, scalar concentration, humidity and leaf area density,
	34	! output of turbulence recycling informations
	35	!
[139]	36	! 138 2007-11-28 10:03:58Z letzel
	37	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	38	! Allow two instead of one digit to specify isosurface and slicer variables.
	39	! Output of sorting frequency of particles
	40	!
[110]	41	! 108 2007-08-24 15:10:38Z letzel
	42	! Output of informations for coupled model runs (boundary conditions etc.)
	43	! + output of momentumfluxes at the top boundary
	44	! Rayleigh damping for ocean, e_init
	45	!
[98]	46	! 97 2007-06-21 08:23:15Z raasch
	47	! Adjustments for the ocean version.
	48	! use_pt_reference renamed use_reference
	49	!
[90]	50	! 87 2007-05-22 15:46:47Z raasch
	51	! Bugfix: output of use_upstream_for_tke
	52	!
[83]	53	! 82 2007-04-16 15:40:52Z raasch
	54	! Preprocessor strings for different linux clusters changed to "lc",
	55	! routine local_flush is used for buffer flushing
	56	!
[77]	57	! 76 2007-03-29 00:58:32Z raasch
	58	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	59	! output of the loop optimization method, moisture renamed humidity,
	60	! output of subversion revision number
	61	!
[39]	62	! 19 2007-02-23 04:53:48Z raasch
	63	! Output of scalar flux applied at top boundary
	64	!
[3]	65	! RCS Log replace by Id keyword, revision history cleaned up
	66	!
[1]	67	! Revision 1.63 2006/08/22 13:53:13 raasch
	68	! Output of dz_max
	69	!
	70	! Revision 1.1 1997/08/11 06:17:20 raasch
	71	! Initial revision
	72	!
	73	!
	74	! Description:
	75	! ------------
	76	! Writing a header with all important informations about the actual run.
	77	! This subroutine is called three times, two times at the beginning
	78	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	79	! end of the run, then writing additional information about CPU-usage on file
	80	! header.
	81	!------------------------------------------------------------------------------!
	82
	83	USE arrays_3d
	84	USE control_parameters
	85	USE cloud_parameters
	86	USE cpulog
	87	USE dvrp_variables
	88	USE grid_variables
	89	USE indices
	90	USE model_1d
	91	USE particle_attributes
	92	USE pegrid
	93	USE spectrum
	94
	95	IMPLICIT NONE
	96
	97	CHARACTER (LEN=1) :: prec
	98	CHARACTER (LEN=2) :: do2d_mode
	99	CHARACTER (LEN=5) :: section_chr
	100	CHARACTER (LEN=9) :: time_to_string
	101	CHARACTER (LEN=10) :: coor_chr, host_chr
	102	CHARACTER (LEN=16) :: begin_chr
[200]	103	CHARACTER (LEN=23) :: ver_rev
[1]	104	CHARACTER (LEN=40) :: output_format
[167]	105	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	106	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	107	run_classification
	108	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	109	temperatures, ugcomponent, vgcomponent
[1]	110	CHARACTER (LEN=85) :: roben, runten
	111
[240]	112	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
[336]	113	cyn, cys, i, ihost, io, j, l, ll, m, mpi_type
[1]	114	REAL :: cpuseconds_per_simulated_second
	115
	116	!
	117	!-- Open the output file. At the end of the simulation, output is directed
	118	!-- to unit 19.
	119	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	120	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	121	io = 15 ! header output on file RUN_CONTROL
	122	ELSE
	123	io = 19 ! header output on file HEADER
	124	ENDIF
	125	CALL check_open( io )
	126
	127	!
	128	!-- At the end of the run, output file (HEADER) will be rewritten with
	129	!-- new informations
	130	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	131
	132	!
	133	!-- Determine kind of model run
	134	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	135	run_classification = '3D - restart run'
[328]	136	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	137	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	138	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	139	run_classification = '3D - run without 1D - prerun'
[197]	140	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	141	run_classification = '3D - run with 1D - prerun'
[197]	142	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	143	run_classification = '3D - run initialized by user'
[1]	144	ELSE
[254]	145	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	146	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	147	ENDIF
[97]	148	IF ( ocean ) THEN
	149	run_classification = 'ocean - ' // run_classification
	150	ELSE
	151	run_classification = 'atmosphere - ' // run_classification
	152	ENDIF
[1]	153
	154	!
	155	!-- Run-identification, date, time, host
	156	host_chr = host(1:10)
[75]	157	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	158	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	159	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	160	#if defined( __mpi2 )
	161	mpi_type = 2
	162	#else
	163	mpi_type = 1
	164	#endif
	165	WRITE ( io, 101 ) mpi_type, coupling_mode
	166	ENDIF
[102]	167	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	168	ADJUSTR( host_chr )
[1]	169	#if defined( __parallel )
	170	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	171	char1 = 'calculated'
	172	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	173	host(1:2) == 'lc' ) .AND. &
	174	npex == -1 .AND. pdims(2) == 1 ) THEN
	175	char1 = 'forced'
	176	ELSE
	177	char1 = 'predefined'
	178	ENDIF
	179	IF ( threads_per_task == 1 ) THEN
[102]	180	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	181	ELSE
[102]	182	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	183	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	184	ENDIF
	185	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	186	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	187	npex == -1 .AND. pdims(2) == 1 ) &
	188	THEN
[102]	189	WRITE ( io, 106 )
[1]	190	ELSEIF ( pdims(2) == 1 ) THEN
[102]	191	WRITE ( io, 107 ) 'x'
[1]	192	ELSEIF ( pdims(1) == 1 ) THEN
[102]	193	WRITE ( io, 107 ) 'y'
[1]	194	ENDIF
[102]	195	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	196	#endif
	197	WRITE ( io, 99 )
	198
	199	!
	200	!-- Numerical schemes
	201	WRITE ( io, 110 )
	202	IF ( psolver(1:7) == 'poisfft' ) THEN
	203	WRITE ( io, 111 ) TRIM( fft_method )
	204	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	205	ELSEIF ( psolver == 'sor' ) THEN
	206	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	207	ELSEIF ( psolver == 'multigrid' ) THEN
	208	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	209	IF ( mg_cycles == -1 ) THEN
	210	WRITE ( io, 140 ) residual_limit
	211	ELSE
	212	WRITE ( io, 141 ) mg_cycles
	213	ENDIF
	214	IF ( mg_switch_to_pe0_level == 0 ) THEN
	215	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	216	nzt_mg(1)
[197]	217	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	218	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	219	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	220	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	221	nzt_mg(mg_switch_to_pe0_level), &
	222	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	223	nzt_mg(1)
	224	ENDIF
	225	ENDIF
	226	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	227	THEN
	228	WRITE ( io, 142 )
	229	ENDIF
	230
	231	IF ( momentum_advec == 'pw-scheme' ) THEN
	232	WRITE ( io, 113 )
	233	ELSE
	234	WRITE ( io, 114 )
	235	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	236	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	237	overshoot_limit_w /= 0.0 ) THEN
	238	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	239	overshoot_limit_w
	240	ENDIF
	241	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	242	ups_limit_w /= 0.0 ) &
	243	THEN
	244	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	245	ENDIF
	246	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	247	ENDIF
	248	IF ( scalar_advec == 'pw-scheme' ) THEN
	249	WRITE ( io, 116 )
	250	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	251	WRITE ( io, 117 )
	252	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	253	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	254	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	255	ENDIF
	256	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	257	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	258	ENDIF
	259	ELSE
	260	WRITE ( io, 118 )
	261	ENDIF
[63]	262
	263	WRITE ( io, 139 ) TRIM( loop_optimization )
	264
[1]	265	IF ( galilei_transformation ) THEN
	266	IF ( use_ug_for_galilei_tr ) THEN
	267	char1 = 'geostrophic wind'
	268	ELSE
	269	char1 = 'mean wind in model domain'
	270	ENDIF
	271	IF ( simulated_time_at_begin == simulated_time ) THEN
	272	char2 = 'at the start of the run'
	273	ELSE
	274	char2 = 'at the end of the run'
	275	ENDIF
	276	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	277	advected_distance_x/1000.0, advected_distance_y/1000.0
	278	ENDIF
	279	IF ( timestep_scheme == 'leapfrog' ) THEN
	280	WRITE ( io, 120 )
	281	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	282	WRITE ( io, 121 )
	283	ELSE
	284	WRITE ( io, 122 ) timestep_scheme
	285	ENDIF
[87]	286	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	287	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	288	IF ( .NOT. ocean ) THEN
	289	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	290	rayleigh_damping_factor
	291	ELSE
	292	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	293	rayleigh_damping_factor
	294	ENDIF
[1]	295	ENDIF
[75]	296	IF ( humidity ) THEN
[1]	297	IF ( .NOT. cloud_physics ) THEN
	298	WRITE ( io, 129 )
	299	ELSE
	300	WRITE ( io, 130 )
	301	WRITE ( io, 131 )
	302	IF ( radiation ) WRITE ( io, 132 )
	303	IF ( precipitation ) WRITE ( io, 133 )
	304	ENDIF
	305	ENDIF
	306	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	307	IF ( conserve_volume_flow ) THEN
[241]	308	WRITE ( io, 150 ) conserve_volume_flow_mode
	309	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	310	WRITE ( io, 151 ) u_bulk, v_bulk
	311	ENDIF
[240]	312	ELSEIF ( dp_external ) THEN
	313	IF ( dp_smooth ) THEN
[241]	314	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	315	ELSE
[241]	316	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	317	ENDIF
	318	ENDIF
[1]	319	WRITE ( io, 99 )
	320
	321	!
	322	!-- Runtime and timestep informations
	323	WRITE ( io, 200 )
	324	IF ( .NOT. dt_fixed ) THEN
	325	WRITE ( io, 201 ) dt_max, cfl_factor
	326	ELSE
	327	WRITE ( io, 202 ) dt
	328	ENDIF
	329	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	330
	331	IF ( time_restart /= 9999999.9 .AND. &
	332	simulated_time_at_begin == simulated_time ) THEN
	333	IF ( dt_restart == 9999999.9 ) THEN
	334	WRITE ( io, 204 ) ' Restart at: ',time_restart
	335	ELSE
	336	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	337	ENDIF
	338	ENDIF
	339
	340	IF ( simulated_time_at_begin /= simulated_time ) THEN
	341	i = MAX ( log_point_s(10)%counts, 1 )
	342	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	343	cpuseconds_per_simulated_second = 0.0
	344	ELSE
	345	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	346	( simulated_time - &
	347	simulated_time_at_begin )
	348	ENDIF
	349	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	350	log_point_s(10)%sum / REAL( i ), &
	351	cpuseconds_per_simulated_second
	352	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	353	IF ( dt_restart == 9999999.9 ) THEN
	354	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	355	ELSE
	356	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	357	ENDIF
	358	ENDIF
	359	ENDIF
	360
	361	!
[291]	362	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	363	!-- and ocean are used. In this case, coupling_start_time defines the time
	364	!-- when the coupling is switched on.
	365	IF ( coupling_start_time /= 0.0 ) THEN
	366	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	367	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	368	ELSE
	369	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	370	'precursor runs'
	371	ENDIF
	372	WRITE ( io, 207 ) char1, coupling_start_time
	373	ENDIF
	374
	375	!
[1]	376	!-- Computational grid
[94]	377	IF ( .NOT. ocean ) THEN
	378	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	379	IF ( dz_stretch_level_index < nzt+1 ) THEN
	380	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	381	dz_stretch_factor, dz_max
	382	ENDIF
	383	ELSE
	384	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	385	IF ( dz_stretch_level_index > 0 ) THEN
	386	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	387	dz_stretch_factor, dz_max
	388	ENDIF
[1]	389	ENDIF
	390	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	391	MIN( nnz+2, nzt+2 )
[76]	392	IF ( numprocs > 1 ) THEN
	393	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	394	WRITE ( io, 255 )
	395	ELSE
	396	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	397	ENDIF
[1]	398	ENDIF
	399	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	400
	401	!
	402	!-- Topography
	403	WRITE ( io, 270 ) topography
	404	SELECT CASE ( TRIM( topography ) )
	405
	406	CASE ( 'flat' )
	407	! no actions necessary
	408
	409	CASE ( 'single_building' )
	410	blx = INT( building_length_x / dx )
	411	bly = INT( building_length_y / dy )
	412	bh = INT( building_height / dz )
	413
	414	IF ( building_wall_left == 9999999.9 ) THEN
	415	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	416	ENDIF
	417	bxl = INT ( building_wall_left / dx + 0.5 )
	418	bxr = bxl + blx
	419
	420	IF ( building_wall_south == 9999999.9 ) THEN
	421	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	422	ENDIF
	423	bys = INT ( building_wall_south / dy + 0.5 )
	424	byn = bys + bly
	425
	426	WRITE ( io, 271 ) building_length_x, building_length_y, &
	427	building_height, bxl, bxr, bys, byn
	428
[240]	429	CASE ( 'single_street_canyon' )
	430	ch = NINT( canyon_height / dz )
	431	IF ( canyon_width_x /= 9999999.9 ) THEN
	432	!
	433	!-- Street canyon in y direction
	434	cwx = NINT( canyon_width_x / dx )
	435	IF ( canyon_wall_left == 9999999.9 ) THEN
	436	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	437	ENDIF
	438	cxl = NINT( canyon_wall_left / dx )
	439	cxr = cxl + cwx
	440	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	441
	442	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	443	!
	444	!-- Street canyon in x direction
	445	cwy = NINT( canyon_width_y / dy )
	446	IF ( canyon_wall_south == 9999999.9 ) THEN
	447	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	448	ENDIF
	449	cys = NINT( canyon_wall_south / dy )
	450	cyn = cys + cwy
	451	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	452	ENDIF
	453
[1]	454	END SELECT
	455
[256]	456	IF ( TRIM( topography ) /= 'flat' ) THEN
	457	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	458	IF ( TRIM( topography ) == 'single_building' .OR. &
	459	TRIM( topography ) == 'single_street_canyon' ) THEN
	460	WRITE ( io, 278 )
	461	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	462	WRITE ( io, 279 )
	463	ENDIF
	464	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	465	WRITE ( io, 278 )
	466	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	467	WRITE ( io, 279 )
	468	ENDIF
	469	ENDIF
	470
[138]	471	IF ( plant_canopy ) THEN
	472
	473	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	474	IF ( passive_scalar ) THEN
	475	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	476	leaf_surface_concentration
	477	ENDIF
[138]	478
[1]	479	!
[153]	480	!-- Heat flux at the top of vegetation
	481	WRITE ( io, 282 ) cthf
	482
	483	!
[138]	484	!-- Leaf area density profile
	485	!-- Building output strings, starting with surface value
	486	WRITE ( learde, '(F6.2)' ) lad_surface
	487	gradients = '------'
	488	slices = ' 0'
	489	coordinates = ' 0.0'
	490	i = 1
	491	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	492
	493	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	494	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	495
	496	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	497	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	498
	499	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	500	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	501
	502	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	503	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	504
	505	i = i + 1
	506	ENDDO
	507
[153]	508	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	509	TRIM( gradients ), TRIM( slices )
	510
	511	ENDIF
	512
	513	!
[1]	514	!-- Boundary conditions
	515	IF ( ibc_p_b == 0 ) THEN
	516	runten = 'p(0) = 0 \|'
	517	ELSEIF ( ibc_p_b == 1 ) THEN
	518	runten = 'p(0) = p(1) \|'
	519	ELSE
	520	runten = 'p(0) = p(1) +R\|'
	521	ENDIF
	522	IF ( ibc_p_t == 0 ) THEN
	523	roben = 'p(nzt+1) = 0 \|'
	524	ELSE
	525	roben = 'p(nzt+1) = p(nzt) \|'
	526	ENDIF
	527
	528	IF ( ibc_uv_b == 0 ) THEN
	529	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	530	ELSE
	531	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	532	ENDIF
[132]	533	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	534	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	535	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	536	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	537	ELSE
	538	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	539	ENDIF
	540
	541	IF ( ibc_pt_b == 0 ) THEN
	542	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	543	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	544	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	545	ELSEIF ( ibc_pt_b == 2 ) THEN
	546	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	547	ENDIF
	548	IF ( ibc_pt_t == 0 ) THEN
[19]	549	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	550	ELSEIF( ibc_pt_t == 1 ) THEN
	551	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	552	ELSEIF( ibc_pt_t == 2 ) THEN
	553	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	554	ENDIF
	555
	556	WRITE ( io, 300 ) runten, roben
	557
	558	IF ( .NOT. constant_diffusion ) THEN
	559	IF ( ibc_e_b == 1 ) THEN
	560	runten = 'e(0) = e(1)'
	561	ELSE
	562	runten = 'e(0) = e(1) = (u/0.1)*2'
	563	ENDIF
	564	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	565
[97]	566	WRITE ( io, 301 ) 'e', runten, roben
[1]	567
	568	ENDIF
	569
[97]	570	IF ( ocean ) THEN
	571	runten = 'sa(0) = sa(1)'
	572	IF ( ibc_sa_t == 0 ) THEN
	573	roben = 'sa(nzt+1) = sa_surface'
[1]	574	ELSE
[97]	575	roben = 'sa(nzt+1) = sa(nzt)'
[1]	576	ENDIF
[97]	577	WRITE ( io, 301 ) 'sa', runten, roben
	578	ENDIF
[1]	579
[97]	580	IF ( humidity ) THEN
	581	IF ( ibc_q_b == 0 ) THEN
	582	runten = 'q(0) = q_surface'
	583	ELSE
	584	runten = 'q(0) = q(1)'
	585	ENDIF
	586	IF ( ibc_q_t == 0 ) THEN
	587	roben = 'q(nzt) = q_top'
	588	ELSE
	589	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	590	ENDIF
	591	WRITE ( io, 301 ) 'q', runten, roben
	592	ENDIF
[1]	593
[97]	594	IF ( passive_scalar ) THEN
	595	IF ( ibc_q_b == 0 ) THEN
	596	runten = 's(0) = s_surface'
	597	ELSE
	598	runten = 's(0) = s(1)'
	599	ENDIF
	600	IF ( ibc_q_t == 0 ) THEN
	601	roben = 's(nzt) = s_top'
	602	ELSE
	603	roben = 's(nzt) = s(nzt-1) + ds/dz'
	604	ENDIF
	605	WRITE ( io, 301 ) 's', runten, roben
[1]	606	ENDIF
	607
	608	IF ( use_surface_fluxes ) THEN
	609	WRITE ( io, 303 )
	610	IF ( constant_heatflux ) THEN
	611	WRITE ( io, 306 ) surface_heatflux
	612	IF ( random_heatflux ) WRITE ( io, 307 )
	613	ENDIF
[75]	614	IF ( humidity .AND. constant_waterflux ) THEN
[1]	615	WRITE ( io, 311 ) surface_waterflux
	616	ENDIF
	617	IF ( passive_scalar .AND. constant_waterflux ) THEN
	618	WRITE ( io, 313 ) surface_waterflux
	619	ENDIF
	620	ENDIF
	621
[19]	622	IF ( use_top_fluxes ) THEN
	623	WRITE ( io, 304 )
[102]	624	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	625	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	626	IF ( constant_top_heatflux ) THEN
	627	WRITE ( io, 306 ) top_heatflux
	628	ENDIF
	629	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	630	WRITE ( io, 316 )
[19]	631	ENDIF
[97]	632	IF ( ocean .AND. constant_top_salinityflux ) THEN
	633	WRITE ( io, 309 ) top_salinityflux
	634	ENDIF
[75]	635	IF ( humidity .OR. passive_scalar ) THEN
[19]	636	WRITE ( io, 315 )
	637	ENDIF
	638	ENDIF
	639
[1]	640	IF ( prandtl_layer ) THEN
[94]	641	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	642	rif_min, rif_max
[1]	643	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	644	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	645	WRITE ( io, 312 )
	646	ENDIF
	647	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	648	WRITE ( io, 314 )
	649	ENDIF
	650	ELSE
	651	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	652	WRITE ( io, 310 ) rif_min, rif_max
	653	ENDIF
	654	ENDIF
	655
	656	WRITE ( io, 317 ) bc_lr, bc_ns
	657	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	658	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	659	IF ( turbulent_inflow ) THEN
	660	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	661	inflow_damping_height, inflow_damping_width
	662	ENDIF
[1]	663	ENDIF
	664
	665	!
	666	!-- Listing of 1D-profiles
[151]	667	WRITE ( io, 325 ) dt_dopr_listing
[1]	668	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	669	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	670	ENDIF
	671
	672	!
	673	!-- DATA output
	674	WRITE ( io, 330 )
	675	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	676	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	677	ENDIF
	678
	679	!
	680	!-- 1D-profiles
[346]	681	dopr_chr = 'Profile:'
[1]	682	IF ( dopr_n /= 0 ) THEN
	683	WRITE ( io, 331 )
	684
	685	output_format = ''
	686	IF ( netcdf_output ) THEN
	687	IF ( netcdf_64bit ) THEN
	688	output_format = 'netcdf (64 bit offset)'
	689	ELSE
	690	output_format = 'netcdf'
	691	ENDIF
	692	ENDIF
	693	IF ( profil_output ) THEN
	694	IF ( netcdf_output ) THEN
	695	output_format = TRIM( output_format ) // ' and profil'
	696	ELSE
	697	output_format = 'profil'
	698	ENDIF
	699	ENDIF
[292]	700	WRITE ( io, 344 ) output_format
[1]	701
	702	DO i = 1, dopr_n
	703	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	704	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	705	WRITE ( io, 332 ) dopr_chr
	706	dopr_chr = ' :'
	707	ENDIF
	708	ENDDO
	709
	710	IF ( dopr_chr /= '' ) THEN
	711	WRITE ( io, 332 ) dopr_chr
	712	ENDIF
	713	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	714	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	715	ENDIF
	716
	717	!
	718	!-- 2D-arrays
	719	DO av = 0, 1
	720
	721	i = 1
	722	do2d_xy = ''
	723	do2d_xz = ''
	724	do2d_yz = ''
	725	DO WHILE ( do2d(av,i) /= ' ' )
	726
	727	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	728	do2d_mode = do2d(av,i)(l-1:l)
	729
	730	SELECT CASE ( do2d_mode )
	731	CASE ( 'xy' )
	732	ll = LEN_TRIM( do2d_xy )
	733	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	734	CASE ( 'xz' )
	735	ll = LEN_TRIM( do2d_xz )
	736	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	737	CASE ( 'yz' )
	738	ll = LEN_TRIM( do2d_yz )
	739	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	740	END SELECT
	741
	742	i = i + 1
	743
	744	ENDDO
	745
	746	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	747	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	748	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	749	( netcdf_output .OR. iso2d_output ) ) THEN
	750
	751	IF ( av == 0 ) THEN
	752	WRITE ( io, 334 ) ''
	753	ELSE
	754	WRITE ( io, 334 ) '(time-averaged)'
	755	ENDIF
	756
	757	IF ( do2d_at_begin ) THEN
	758	begin_chr = 'and at the start'
	759	ELSE
	760	begin_chr = ''
	761	ENDIF
	762
	763	output_format = ''
	764	IF ( netcdf_output ) THEN
	765	IF ( netcdf_64bit ) THEN
	766	output_format = 'netcdf (64 bit offset)'
	767	ELSE
	768	output_format = 'netcdf'
	769	ENDIF
	770	ENDIF
	771	IF ( iso2d_output ) THEN
	772	IF ( netcdf_output ) THEN
	773	output_format = TRIM( output_format ) // ' and iso2d'
	774	ELSE
	775	output_format = 'iso2d'
	776	ENDIF
	777	ENDIF
[292]	778	WRITE ( io, 344 ) output_format
[1]	779
	780	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	781	i = 1
	782	slices = '/'
	783	coordinates = '/'
	784	!
	785	!-- Building strings with index and coordinate informations of the
	786	!-- slices
	787	DO WHILE ( section(i,1) /= -9999 )
	788
	789	WRITE (section_chr,'(I5)') section(i,1)
	790	section_chr = ADJUSTL( section_chr )
	791	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	792
[206]	793	IF ( section(i,1) == -1 ) THEN
	794	WRITE (coor_chr,'(F10.1)') -1.0
	795	ELSE
	796	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	797	ENDIF
[1]	798	coor_chr = ADJUSTL( coor_chr )
	799	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	800
	801	i = i + 1
	802	ENDDO
	803	IF ( av == 0 ) THEN
	804	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	805	TRIM( begin_chr ), 'k', TRIM( slices ), &
	806	TRIM( coordinates )
	807	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	808	WRITE ( io, 339 ) skip_time_do2d_xy
	809	ENDIF
	810	ELSE
	811	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	812	TRIM( begin_chr ), averaging_interval, &
	813	dt_averaging_input, 'k', TRIM( slices ), &
	814	TRIM( coordinates )
	815	IF ( skip_time_data_output_av /= 0.0 ) THEN
	816	WRITE ( io, 339 ) skip_time_data_output_av
	817	ENDIF
	818	ENDIF
	819
	820	ENDIF
	821
	822	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	823	i = 1
	824	slices = '/'
	825	coordinates = '/'
	826	!
	827	!-- Building strings with index and coordinate informations of the
	828	!-- slices
	829	DO WHILE ( section(i,2) /= -9999 )
	830
	831	WRITE (section_chr,'(I5)') section(i,2)
	832	section_chr = ADJUSTL( section_chr )
	833	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	834
	835	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	836	coor_chr = ADJUSTL( coor_chr )
	837	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	838
	839	i = i + 1
	840	ENDDO
	841	IF ( av == 0 ) THEN
	842	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	843	TRIM( begin_chr ), 'j', TRIM( slices ), &
	844	TRIM( coordinates )
	845	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	846	WRITE ( io, 339 ) skip_time_do2d_xz
	847	ENDIF
	848	ELSE
	849	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	850	TRIM( begin_chr ), averaging_interval, &
	851	dt_averaging_input, 'j', TRIM( slices ), &
	852	TRIM( coordinates )
	853	IF ( skip_time_data_output_av /= 0.0 ) THEN
	854	WRITE ( io, 339 ) skip_time_data_output_av
	855	ENDIF
	856	ENDIF
	857	ENDIF
	858
	859	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	860	i = 1
	861	slices = '/'
	862	coordinates = '/'
	863	!
	864	!-- Building strings with index and coordinate informations of the
	865	!-- slices
	866	DO WHILE ( section(i,3) /= -9999 )
	867
	868	WRITE (section_chr,'(I5)') section(i,3)
	869	section_chr = ADJUSTL( section_chr )
	870	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	871
	872	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	873	coor_chr = ADJUSTL( coor_chr )
	874	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	875
	876	i = i + 1
	877	ENDDO
	878	IF ( av == 0 ) THEN
	879	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	880	TRIM( begin_chr ), 'i', TRIM( slices ), &
	881	TRIM( coordinates )
	882	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	883	WRITE ( io, 339 ) skip_time_do2d_yz
	884	ENDIF
	885	ELSE
	886	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	887	TRIM( begin_chr ), averaging_interval, &
	888	dt_averaging_input, 'i', TRIM( slices ), &
	889	TRIM( coordinates )
	890	IF ( skip_time_data_output_av /= 0.0 ) THEN
	891	WRITE ( io, 339 ) skip_time_data_output_av
	892	ENDIF
	893	ENDIF
	894	ENDIF
	895
	896	ENDIF
	897
	898	ENDDO
	899
	900	!
	901	!-- 3d-arrays
	902	DO av = 0, 1
	903
	904	i = 1
	905	do3d_chr = ''
	906	DO WHILE ( do3d(av,i) /= ' ' )
	907
	908	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	909	i = i + 1
	910
	911	ENDDO
	912
	913	IF ( do3d_chr /= '' ) THEN
	914	IF ( av == 0 ) THEN
	915	WRITE ( io, 336 ) ''
	916	ELSE
	917	WRITE ( io, 336 ) '(time-averaged)'
	918	ENDIF
	919
	920	output_format = ''
	921	IF ( netcdf_output ) THEN
[292]	922	IF ( netcdf_64bit_3d ) THEN
[1]	923	output_format = 'netcdf (64 bit offset)'
	924	ELSE
	925	output_format = 'netcdf'
	926	ENDIF
	927	ENDIF
	928	IF ( avs_output ) THEN
	929	IF ( netcdf_output ) THEN
	930	output_format = TRIM( output_format ) // ' and avs'
	931	ELSE
	932	output_format = 'avs'
	933	ENDIF
	934	ENDIF
[292]	935	WRITE ( io, 344 ) output_format
[1]	936
	937	IF ( do3d_at_begin ) THEN
	938	begin_chr = 'and at the start'
	939	ELSE
	940	begin_chr = ''
	941	ENDIF
	942	IF ( av == 0 ) THEN
	943	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	944	zu(nz_do3d), nz_do3d
	945	ELSE
	946	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	947	TRIM( begin_chr ), averaging_interval, &
	948	dt_averaging_input, zu(nz_do3d), nz_do3d
	949	ENDIF
	950
	951	IF ( do3d_compress ) THEN
	952	do3d_chr = ''
	953	i = 1
	954	DO WHILE ( do3d(av,i) /= ' ' )
	955
	956	SELECT CASE ( do3d(av,i) )
	957	CASE ( 'u' )
	958	j = 1
	959	CASE ( 'v' )
	960	j = 2
	961	CASE ( 'w' )
	962	j = 3
	963	CASE ( 'p' )
	964	j = 4
	965	CASE ( 'pt' )
	966	j = 5
	967	END SELECT
	968	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	969	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	970	':' // prec // ','
	971	i = i + 1
	972
	973	ENDDO
	974	WRITE ( io, 338 ) do3d_chr
	975
	976	ENDIF
	977
	978	IF ( av == 0 ) THEN
	979	IF ( skip_time_do3d /= 0.0 ) THEN
	980	WRITE ( io, 339 ) skip_time_do3d
	981	ENDIF
	982	ELSE
	983	IF ( skip_time_data_output_av /= 0.0 ) THEN
	984	WRITE ( io, 339 ) skip_time_data_output_av
	985	ENDIF
	986	ENDIF
	987
	988	ENDIF
	989
	990	ENDDO
	991
	992	!
	993	!-- Timeseries
	994	IF ( dt_dots /= 9999999.9 ) THEN
	995	WRITE ( io, 340 )
	996
	997	output_format = ''
	998	IF ( netcdf_output ) THEN
	999	IF ( netcdf_64bit ) THEN
	1000	output_format = 'netcdf (64 bit offset)'
	1001	ELSE
	1002	output_format = 'netcdf'
	1003	ENDIF
	1004	ENDIF
	1005	IF ( profil_output ) THEN
	1006	IF ( netcdf_output ) THEN
	1007	output_format = TRIM( output_format ) // ' and profil'
	1008	ELSE
	1009	output_format = 'profil'
	1010	ENDIF
	1011	ENDIF
[292]	1012	WRITE ( io, 344 ) output_format
[1]	1013	WRITE ( io, 341 ) dt_dots
	1014	ENDIF
	1015
	1016	#if defined( __dvrp_graphics )
	1017	!
	1018	!-- Dvrp-output
	1019	IF ( dt_dvrp /= 9999999.9 ) THEN
	1020	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1021	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1022	i = 1
	1023	l = 0
[336]	1024	m = 0
[1]	1025	DO WHILE ( mode_dvrp(i) /= ' ' )
	1026	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1027	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1028	l = l + 1
	1029	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1030	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1031	isosurface_color(:,l)
[1]	1032	ENDIF
	1033	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1034	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1035	m = m + 1
	1036	IF ( do2d(0,j) /= ' ' ) THEN
	1037	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1038	slicer_range_limits_dvrp(:,m)
	1039	ENDIF
[1]	1040	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1041	WRITE ( io, 363 ) dvrp_psize
	1042	IF ( particle_dvrpsize /= 'none' ) THEN
	1043	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1044	dvrpsize_interval
	1045	ENDIF
	1046	IF ( particle_color /= 'none' ) THEN
	1047	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1048	color_interval
	1049	ENDIF
[1]	1050	ENDIF
	1051	i = i + 1
	1052	ENDDO
[237]	1053
[336]	1054	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1055	superelevation_y, superelevation, clip_dvrp_l, &
	1056	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1057
	1058	IF ( TRIM( topography ) /= 'flat' ) THEN
	1059	WRITE ( io, 366 ) topography_color
	1060	IF ( cluster_size > 1 ) THEN
	1061	WRITE ( io, 367 ) cluster_size
	1062	ENDIF
[237]	1063	ENDIF
	1064
[1]	1065	ENDIF
	1066	#endif
	1067
	1068	#if defined( __spectra )
	1069	!
	1070	!-- Spectra output
	1071	IF ( dt_dosp /= 9999999.9 ) THEN
	1072	WRITE ( io, 370 )
	1073
	1074	output_format = ''
	1075	IF ( netcdf_output ) THEN
	1076	IF ( netcdf_64bit ) THEN
	1077	output_format = 'netcdf (64 bit offset)'
	1078	ELSE
	1079	output_format = 'netcdf'
	1080	ENDIF
	1081	ENDIF
	1082	IF ( profil_output ) THEN
	1083	IF ( netcdf_output ) THEN
	1084	output_format = TRIM( output_format ) // ' and profil'
	1085	ELSE
	1086	output_format = 'profil'
	1087	ENDIF
	1088	ENDIF
[292]	1089	WRITE ( io, 344 ) output_format
[1]	1090	WRITE ( io, 371 ) dt_dosp
	1091	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1092	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1093	( spectra_direction(i), i = 1,10 ), &
[189]	1094	( comp_spectra_level(i), i = 1,100 ), &
	1095	( plot_spectra_level(i), i = 1,100 ), &
[1]	1096	averaging_interval_sp, dt_averaging_input_pr
	1097	ENDIF
	1098	#endif
	1099
	1100	WRITE ( io, 99 )
	1101
	1102	!
	1103	!-- Physical quantities
	1104	WRITE ( io, 400 )
	1105
	1106	!
	1107	!-- Geostrophic parameters
	1108	WRITE ( io, 410 ) omega, phi, f, fs
	1109
	1110	!
	1111	!-- Other quantities
	1112	WRITE ( io, 411 ) g
[97]	1113	IF ( use_reference ) THEN
	1114	IF ( ocean ) THEN
	1115	WRITE ( io, 412 ) prho_reference
	1116	ELSE
	1117	WRITE ( io, 413 ) pt_reference
	1118	ENDIF
	1119	ENDIF
[1]	1120
	1121	!
	1122	!-- Cloud physics parameters
	1123	IF ( cloud_physics ) THEN
[57]	1124	WRITE ( io, 415 )
	1125	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1126	ENDIF
	1127
	1128	!-- Profile of the geostrophic wind (component ug)
	1129	!-- Building output strings
	1130	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1131	gradients = '------'
	1132	slices = ' 0'
	1133	coordinates = ' 0.0'
	1134	i = 1
	1135	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1136
[167]	1137	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1138	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1139
[167]	1140	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1141	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1142
[167]	1143	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1144	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1145
[167]	1146	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1147	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1148
	1149	i = i + 1
	1150	ENDDO
	1151
	1152	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1153	TRIM( gradients ), TRIM( slices )
	1154
	1155	!-- Profile of the geostrophic wind (component vg)
	1156	!-- Building output strings
	1157	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1158	gradients = '------'
	1159	slices = ' 0'
	1160	coordinates = ' 0.0'
	1161	i = 1
	1162	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1163
[167]	1164	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1165	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1166
[167]	1167	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1168	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1169
[167]	1170	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1171	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1172
[167]	1173	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1174	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1175
	1176	i = i + 1
	1177	ENDDO
	1178
	1179	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1180	TRIM( gradients ), TRIM( slices )
	1181
	1182	!
	1183	!-- Initial temperature profile
	1184	!-- Building output strings, starting with surface temperature
	1185	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1186	gradients = '------'
	1187	slices = ' 0'
	1188	coordinates = ' 0.0'
	1189	i = 1
	1190	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1191
[94]	1192	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1193	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1194
[94]	1195	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1196	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1197
[94]	1198	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1199	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1200
[94]	1201	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1202	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1203
	1204	i = i + 1
	1205	ENDDO
	1206
	1207	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1208	TRIM( gradients ), TRIM( slices )
	1209
	1210	!
	1211	!-- Initial humidity profile
	1212	!-- Building output strings, starting with surface humidity
[75]	1213	IF ( humidity .OR. passive_scalar ) THEN
[1]	1214	WRITE ( temperatures, '(E8.1)' ) q_surface
	1215	gradients = '--------'
	1216	slices = ' 0'
	1217	coordinates = ' 0.0'
	1218	i = 1
	1219	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1220
	1221	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1222	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1223
	1224	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1225	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1226
	1227	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1228	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1229
	1230	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1231	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1232
	1233	i = i + 1
	1234	ENDDO
	1235
[75]	1236	IF ( humidity ) THEN
[1]	1237	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1238	TRIM( gradients ), TRIM( slices )
	1239	ELSE
	1240	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1241	TRIM( gradients ), TRIM( slices )
	1242	ENDIF
	1243	ENDIF
	1244
	1245	!
[97]	1246	!-- Initial salinity profile
	1247	!-- Building output strings, starting with surface salinity
	1248	IF ( ocean ) THEN
	1249	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1250	gradients = '------'
	1251	slices = ' 0'
	1252	coordinates = ' 0.0'
	1253	i = 1
	1254	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1255
	1256	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1257	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1258
	1259	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1260	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1261
	1262	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1263	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1264
	1265	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1266	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1267
	1268	i = i + 1
	1269	ENDDO
	1270
	1271	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1272	TRIM( gradients ), TRIM( slices )
	1273	ENDIF
	1274
	1275	!
[1]	1276	!-- LES / turbulence parameters
	1277	WRITE ( io, 450 )
	1278
	1279	!--
	1280	! ... LES-constants used must still be added here
	1281	!--
	1282	IF ( constant_diffusion ) THEN
	1283	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1284	prandtl_number
	1285	ENDIF
	1286	IF ( .NOT. constant_diffusion) THEN
[108]	1287	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1288	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1289	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1290	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1291	ENDIF
	1292
	1293	!
	1294	!-- Special actions during the run
	1295	WRITE ( io, 470 )
	1296	IF ( create_disturbances ) THEN
	1297	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1298	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1299	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1300	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1301	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1302	ELSE
	1303	WRITE ( io, 473 ) disturbance_energy_limit
	1304	ENDIF
	1305	WRITE ( io, 474 ) TRIM( random_generator )
	1306	ENDIF
	1307	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1308	WRITE ( io, 475 ) pt_surface_initial_change
	1309	ENDIF
[75]	1310	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1311	WRITE ( io, 476 ) q_surface_initial_change
	1312	ENDIF
	1313	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1314	WRITE ( io, 477 ) q_surface_initial_change
	1315	ENDIF
	1316
[60]	1317	IF ( particle_advection ) THEN
[1]	1318	!
[60]	1319	!-- Particle attributes
	1320	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1321	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1322	end_time_prel, dt_sort_particles
[60]	1323	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1324	IF ( random_start_position ) WRITE ( io, 481 )
	1325	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1326	WRITE ( io, 495 ) total_number_of_particles
	1327	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1328	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1329	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1330	WRITE ( io, 484 ) total_number_of_tails, &
	1331	minimum_tailpoint_distance, &
	1332	maximum_tailpoint_age
	1333	ENDIF
[1]	1334	ENDIF
[60]	1335	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1336	WRITE ( io, 485 ) dt_write_particle_data
	1337	output_format = ''
	1338	IF ( netcdf_output ) THEN
	1339	IF ( netcdf_64bit ) THEN
	1340	output_format = 'netcdf (64 bit offset) and binary'
	1341	ELSE
	1342	output_format = 'netcdf and binary'
	1343	ENDIF
[1]	1344	ELSE
[60]	1345	output_format = 'binary'
[1]	1346	ENDIF
[292]	1347	WRITE ( io, 344 ) output_format
[1]	1348	ENDIF
[60]	1349	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1350	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1351
[60]	1352	WRITE ( io, 487 ) number_of_particle_groups
[1]	1353
[60]	1354	DO i = 1, number_of_particle_groups
	1355	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1356	WRITE ( io, 490 ) i, 0.0
	1357	WRITE ( io, 492 )
[1]	1358	ELSE
[60]	1359	WRITE ( io, 490 ) i, radius(i)
	1360	IF ( density_ratio(i) /= 0.0 ) THEN
	1361	WRITE ( io, 491 ) density_ratio(i)
	1362	ELSE
	1363	WRITE ( io, 492 )
	1364	ENDIF
[1]	1365	ENDIF
[60]	1366	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1367	pdx(i), pdy(i), pdz(i)
[336]	1368	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1369	ENDDO
[1]	1370
[60]	1371	ENDIF
[1]	1372
[60]	1373
[1]	1374	!
	1375	!-- Parameters of 1D-model
	1376	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1377	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1378	mixing_length_1d, dissipation_1d
	1379	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1380	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1381	ENDIF
	1382	ENDIF
	1383
	1384	!
	1385	!-- User-defined informations
	1386	CALL user_header( io )
	1387
	1388	WRITE ( io, 99 )
	1389
	1390	!
	1391	!-- Write buffer contents to disc immediately
[82]	1392	CALL local_flush( io )
[1]	1393
	1394	!
	1395	!-- Here the FORMATs start
	1396
	1397	99 FORMAT (1X,78('-'))
[200]	1398	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1399	1X,'* ',A,' *',9X,A/ &
	1400	1X,'***************************',9X,42('-'))
[291]	1401	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1402	37X,42('-'))
[200]	1403	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1404	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1405	' Run on host: ',A10)
[1]	1406	#if defined( __parallel )
[200]	1407	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1408	')',1X,A)
[200]	1409	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1410	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1411	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1412	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1413	37X,'because the job is running on an SMP-cluster')
[102]	1414	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1415	#endif
	1416	110 FORMAT (/' Numerical Schemes:'/ &
	1417	' -----------------'/)
	1418	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1419	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1420	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1421	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1422	' or Upstream')
	1423	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1424	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1425	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1426	' or Upstream')
	1427	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1428	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1429	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1430	' Translation velocity = ',A/ &
	1431	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1432	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1433	' of timestep changes)')
	1434	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1435	' timestep changes')
	1436	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1437	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1438	' maximum damping coefficient: ',F5.3, ' 1/s')
	1439	124 FORMAT (' Spline-overshoots are being suppressed')
	1440	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1441	' of'/ &
	1442	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1443	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1444	' of'/ &
	1445	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1446	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1447	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1448	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1449	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1450	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1451	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1452	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1453	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1454	' effective emissivity scheme')
	1455	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1456	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1457	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1458	A,'-cycle)'/ &
	1459	' number of grid levels: ',I2/ &
	1460	' Gauss-Seidel red/black iterations: ',I2)
	1461	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1462	I3,')')
	1463	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1464	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1465	I3,')'/ &
	1466	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1467	I3,')')
	1468	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1469	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1470	140 FORMAT (' maximum residual allowed: ',E10.3)
	1471	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1472	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1473	'step')
[87]	1474	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1475	'kinetic energy')
[1]	1476	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1477	'conserved'/ &
	1478	' using the ',A,' mode')
	1479	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1480	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1481	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1482	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1483	200 FORMAT (//' Run time and time step information:'/ &
	1484	' ----------------------------------'/)
	1485	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1486	' CFL-factor: ',F4.2)
	1487	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1488	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1489	' End time: ',F9.3,' s')
	1490	204 FORMAT ( A,F9.3,' s')
	1491	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1492	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1493	' CPU-time used: ',F9.3,' s per timestep: ', &
	1494	' ',F9.3,' s'/ &
	1495	' per second of simulated tim', &
	1496	'e: ',F9.3,' s')
[291]	1497	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1498	250 FORMAT (//' Computational grid and domain size:'/ &
	1499	' ----------------------------------'// &
	1500	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1501	' m dz = ',F7.3,' m'/ &
	1502	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1503	' m z(u) = ',F10.3,' m'/)
	1504	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1505	' factor: ',F5.3/ &
	1506	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1507	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1508	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1509	255 FORMAT (' Subdomains have equal size')
	1510	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1511	'have smaller sizes'/ &
	1512	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1513	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1514	' degrees')
	1515	270 FORMAT (//' Topography informations:'/ &
	1516	' -----------------------'// &
	1517	1X,'Topography: ',A)
	1518	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1519	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1520	' / ',I4)
[240]	1521	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1522	' direction' / &
	1523	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1524	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1525	278 FORMAT (' Topography grid definition convention:'/ &
	1526	' cell edge (staggered grid points'/ &
	1527	' (u in x-direction, v in y-direction))' /)
	1528	279 FORMAT (' Topography grid definition convention:'/ &
	1529	' cell center (scalar grid points)' /)
[138]	1530	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1531	' ------------------------------'// &
	1532	' Canopy mode: ', A / &
	1533	' Canopy top: ',I4 / &
	1534	' Leaf drag coefficient: ',F6.2 /)
[153]	1535	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1536	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1537	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1538	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1539	' Height: ',A,' m'/ &
	1540	' Leaf area density: ',A,' m2/m3'/ &
	1541	' Gradient: ',A,' m2/m4'/ &
	1542	' Gridpoint: ',A)
	1543
[1]	1544	300 FORMAT (//' Boundary conditions:'/ &
	1545	' -------------------'// &
	1546	' p uv ', &
	1547	' pt'// &
	1548	' B. bound.: ',A/ &
	1549	' T. bound.: ',A)
[97]	1550	301 FORMAT (/' ',A// &
[1]	1551	' B. bound.: ',A/ &
	1552	' T. bound.: ',A)
[19]	1553	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1554	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1555	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1556	'computational u,v-level:'// &
[1]	1557	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1558	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1559	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1560	307 FORMAT (' Heatflux has a random normal distribution')
	1561	308 FORMAT (' Predefined surface temperature')
[97]	1562	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1563	310 FORMAT (//' 1D-Model:'// &
	1564	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1565	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1566	312 FORMAT (' Predefined surface humidity')
	1567	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1568	314 FORMAT (' Predefined scalar value at the surface')
[19]	1569	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1570	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1571	'atmosphere model')
[1]	1572	317 FORMAT (//' Lateral boundaries:'/ &
	1573	' left/right: ',A/ &
	1574	' north/south: ',A)
	1575	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1576	'max =',F5.1,' m**2/s')
[151]	1577	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1578	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1579	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1580	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1581	' v: ',F9.6,' m2/s2')
[151]	1582	325 FORMAT (//' List output:'/ &
[1]	1583	' -----------'// &
	1584	' 1D-Profiles:'/ &
	1585	' Output every ',F8.2,' s')
[151]	1586	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1587	' Averaging input every ',F8.2,' s')
	1588	330 FORMAT (//' Data output:'/ &
	1589	' -----------'/)
	1590	331 FORMAT (/' 1D-Profiles:')
	1591	332 FORMAT (/' ',A)
	1592	333 FORMAT (' Output every ',F8.2,' s',/ &
	1593	' Time averaged over ',F8.2,' s'/ &
	1594	' Averaging input every ',F8.2,' s')
	1595	334 FORMAT (/' 2D-Arrays',A,':')
	1596	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1597	' Output every ',F8.2,' s ',A/ &
	1598	' Cross sections at ',A1,' = ',A/ &
	1599	' scalar-coordinates: ',A,' m'/)
	1600	336 FORMAT (/' 3D-Arrays',A,':')
	1601	337 FORMAT (/' Arrays: ',A/ &
	1602	' Output every ',F8.2,' s ',A/ &
	1603	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1604	338 FORMAT (' Compressed data output'/ &
	1605	' Decimal precision: ',A/)
	1606	339 FORMAT (' No output during initial ',F8.2,' s')
	1607	340 FORMAT (/' Time series:')
	1608	341 FORMAT (' Output every ',F8.2,' s'/)
	1609	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1610	' Output every ',F8.2,' s ',A/ &
	1611	' Time averaged over ',F8.2,' s'/ &
	1612	' Averaging input every ',F8.2,' s'/ &
	1613	' Cross sections at ',A1,' = ',A/ &
	1614	' scalar-coordinates: ',A,' m'/)
	1615	343 FORMAT (/' Arrays: ',A/ &
	1616	' Output every ',F8.2,' s ',A/ &
	1617	' Time averaged over ',F8.2,' s'/ &
	1618	' Averaging input every ',F8.2,' s'/ &
	1619	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1620	344 FORMAT (' Output format: ',A/)
[1]	1621	#if defined( __dvrp_graphics )
	1622	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1623	' Output every ',F7.1,' s'/ &
	1624	' Output mode: ',A/ &
	1625	' Host / User: ',A,' / ',A/ &
	1626	' Directory: ',A// &
	1627	' The sequence contains:')
[337]	1628	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1629	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1630	362 FORMAT (/' Slicer plane ',A/ &
[336]	1631	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1632	363 FORMAT (/' Particles'/ &
[336]	1633	' particle size: ',F7.2,' m')
	1634	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1635	F6.2,',',F6.2,']')
[337]	1636	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1637	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1638	')'/ &
	1639	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1640	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1641	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1642	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1643	#endif
	1644	#if defined( __spectra )
	1645	370 FORMAT (' Spectra:')
	1646	371 FORMAT (' Output every ',F7.1,' s'/)
	1647	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1648	' Directions: ', 10(A5,',')/ &
[189]	1649	' height levels k = ', 20(I3,',')/ &
	1650	' ', 20(I3,',')/ &
	1651	' ', 20(I3,',')/ &
	1652	' ', 20(I3,',')/ &
	1653	' ', 19(I3,','),I3,'.'/ &
[1]	1654	' height levels selected for standard plot:'/ &
[189]	1655	' k = ', 20(I3,',')/ &
	1656	' ', 20(I3,',')/ &
	1657	' ', 20(I3,',')/ &
	1658	' ', 20(I3,',')/ &
	1659	' ', 19(I3,','),I3,'.'/ &
[1]	1660	' Time averaged over ', F7.1, ' s,' / &
	1661	' Profiles for the time averaging are taken every ', &
	1662	F6.1,' s')
	1663	#endif
	1664	400 FORMAT (//' Physical quantities:'/ &
	1665	' -------------------'/)
	1666	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1667	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1668	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1669	' f* = ',F9.6,' 1/s')
	1670	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1671	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1672	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1673	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1674	' ------------------------'/)
[57]	1675	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1676	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1677	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1678	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1679	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1680	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1681	' Height: ',A,' m'/ &
	1682	' Temperature: ',A,' K'/ &
	1683	' Gradient: ',A,' K/100m'/ &
	1684	' Gridpoint: ',A)
	1685	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1686	' Height: ',A,' m'/ &
	1687	' Humidity: ',A,' kg/kg'/ &
	1688	' Gradient: ',A,' (kg/kg)/100m'/ &
	1689	' Gridpoint: ',A)
	1690	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1691	' Height: ',A,' m'/ &
	1692	' Scalar concentration: ',A,' kg/m**3'/ &
	1693	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1694	' Gridpoint: ',A)
	1695	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1696	' Height: ',A,' m'/ &
	1697	' ug: ',A,' m/s'/ &
	1698	' Gradient: ',A,' 1/100s'/ &
	1699	' Gridpoint: ',A)
	1700	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1701	' Height: ',A,' m'/ &
[97]	1702	' vg: ',A,' m/s'/ &
[1]	1703	' Gradient: ',A,' 1/100s'/ &
	1704	' Gridpoint: ',A)
[97]	1705	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1706	' Height: ',A,' m'/ &
	1707	' Salinity: ',A,' psu'/ &
	1708	' Gradient: ',A,' psu/100m'/ &
	1709	' Gridpoint: ',A)
[1]	1710	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1711	' ---------------------------'/)
	1712	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1713	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1714	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1715	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1716	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1717	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1718	470 FORMAT (//' Actions during the simulation:'/ &
	1719	' -----------------------------'/)
[94]	1720	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1721	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1722	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1723	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1724	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1725	' to i/j =',I4)
	1726	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1727	1X,F5.3, ' m2/s2')
	1728	474 FORMAT (' Random number generator used : ',A/)
	1729	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1730	'respectively, if'/ &
	1731	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1732	' 3D-simulation'/)
	1733	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1734	'respectively, if the'/ &
	1735	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1736	' the 3D-simulation'/)
	1737	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1738	'respectively, if the'/ &
	1739	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1740	' the 3D-simulation'/)
	1741	480 FORMAT (' Particles:'/ &
	1742	' ---------'// &
	1743	' Particle advection is active (switched on at t = ', F7.1, &
	1744	' s)'/ &
	1745	' Start of new particle generations every ',F6.1,' s'/ &
	1746	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1747	' bottom: ', A, ' top: ', A/&
	1748	' Maximum particle age: ',F9.1,' s'/ &
[117]	1749	' Advection stopped at t = ',F9.1,' s'/ &
	1750	' Particles are sorted every ',F9.1,' s'/)
[1]	1751	481 FORMAT (' Particles have random start positions'/)
[336]	1752	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1753	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1754	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1755	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1756	' Maximum age of the end of the tail: ',F8.2,' s')
	1757	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1758	486 FORMAT (' Particle statistics are written on file'/)
	1759	487 FORMAT (' Number of particle groups: ',I2/)
	1760	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1761	' minimum timestep for advection: ', F7.5/)
	1762	489 FORMAT (' Number of particles simultaneously released at each ', &
	1763	'point: ', I5/)
	1764	490 FORMAT (' Particle group ',I2,':'/ &
	1765	' Particle radius: ',E10.3, 'm')
	1766	491 FORMAT (' Particle inertia is activated'/ &
	1767	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1768	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1769	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1770	' y:',F8.1,' - ',F8.1,' m'/&
	1771	' z:',F8.1,' - ',F8.1,' m'/&
	1772	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1773	' m dz = ',F8.1,' m'/)
	1774	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1775	F8.2,' s'/)
	1776	495 FORMAT (' Number of particles in total domain: ',I10/)
	1777	500 FORMAT (//' 1D-Model parameters:'/ &
	1778	' -------------------'// &
	1779	' Simulation time: ',F8.1,' s'/ &
	1780	' Run-controll output every: ',F8.1,' s'/ &
	1781	' Vertical profile output every: ',F8.1,' s'/ &
	1782	' Mixing length calculation: ',A/ &
	1783	' Dissipation calculation: ',A/)
	1784	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1785
	1786
	1787	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 403

Download in other formats: