Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 345

Last change on this file since 345 was 337, checked in by raasch, 15 years ago
documentation for using dvr; bugfix for last revision
Property svn:keywords set to `Id`
File size: 69.1 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[328]	6	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	7	! Coupling with independent precursor runs.
[254]	8	! Output of messages replaced by message handling routine.
[336]	9	! Output of several additional dvr parameters
[240]	10	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	11	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	12	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	13	! topography_grid_convention moved from user_header
[292]	14	! small bugfix concerning 3d 64bit netcdf output format
[1]	15	!
	16	! Former revisions:
	17	! -----------------
[3]	18	! $Id: header.f90 337 2009-06-10 13:21:14Z heinze $
[39]	19	!
[226]	20	! 206 2008-10-13 14:59:11Z raasch
	21	! Bugfix: error in zu index in case of section_xy = -1
	22	!
[200]	23	! 198 2008-09-17 08:55:28Z raasch
	24	! Format adjustments allowing output of larger revision numbers
	25	!
[198]	26	! 197 2008-09-16 15:29:03Z raasch
	27	! allow 100 spectra levels instead of 10 for consistency with
	28	! define_netcdf_header,
	29	! bugfix in the output of the characteristic levels of potential temperature,
	30	! geostrophic wind, scalar concentration, humidity and leaf area density,
	31	! output of turbulence recycling informations
	32	!
[139]	33	! 138 2007-11-28 10:03:58Z letzel
	34	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	35	! Allow two instead of one digit to specify isosurface and slicer variables.
	36	! Output of sorting frequency of particles
	37	!
[110]	38	! 108 2007-08-24 15:10:38Z letzel
	39	! Output of informations for coupled model runs (boundary conditions etc.)
	40	! + output of momentumfluxes at the top boundary
	41	! Rayleigh damping for ocean, e_init
	42	!
[98]	43	! 97 2007-06-21 08:23:15Z raasch
	44	! Adjustments for the ocean version.
	45	! use_pt_reference renamed use_reference
	46	!
[90]	47	! 87 2007-05-22 15:46:47Z raasch
	48	! Bugfix: output of use_upstream_for_tke
	49	!
[83]	50	! 82 2007-04-16 15:40:52Z raasch
	51	! Preprocessor strings for different linux clusters changed to "lc",
	52	! routine local_flush is used for buffer flushing
	53	!
[77]	54	! 76 2007-03-29 00:58:32Z raasch
	55	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	56	! output of the loop optimization method, moisture renamed humidity,
	57	! output of subversion revision number
	58	!
[39]	59	! 19 2007-02-23 04:53:48Z raasch
	60	! Output of scalar flux applied at top boundary
	61	!
[3]	62	! RCS Log replace by Id keyword, revision history cleaned up
	63	!
[1]	64	! Revision 1.63 2006/08/22 13:53:13 raasch
	65	! Output of dz_max
	66	!
	67	! Revision 1.1 1997/08/11 06:17:20 raasch
	68	! Initial revision
	69	!
	70	!
	71	! Description:
	72	! ------------
	73	! Writing a header with all important informations about the actual run.
	74	! This subroutine is called three times, two times at the beginning
	75	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	76	! end of the run, then writing additional information about CPU-usage on file
	77	! header.
	78	!------------------------------------------------------------------------------!
	79
	80	USE arrays_3d
	81	USE control_parameters
	82	USE cloud_parameters
	83	USE cpulog
	84	USE dvrp_variables
	85	USE grid_variables
	86	USE indices
	87	USE model_1d
	88	USE particle_attributes
	89	USE pegrid
	90	USE spectrum
	91
	92	IMPLICIT NONE
	93
	94	CHARACTER (LEN=1) :: prec
	95	CHARACTER (LEN=2) :: do2d_mode
	96	CHARACTER (LEN=5) :: section_chr
	97	CHARACTER (LEN=9) :: time_to_string
	98	CHARACTER (LEN=10) :: coor_chr, host_chr
	99	CHARACTER (LEN=16) :: begin_chr
[200]	100	CHARACTER (LEN=23) :: ver_rev
[1]	101	CHARACTER (LEN=40) :: output_format
[167]	102	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	103	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	104	run_classification
	105	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	106	temperatures, ugcomponent, vgcomponent
[1]	107	CHARACTER (LEN=85) :: roben, runten
	108
[240]	109	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
[336]	110	cyn, cys, i, ihost, io, j, l, ll, m, mpi_type
[1]	111	REAL :: cpuseconds_per_simulated_second
	112
	113	!
	114	!-- Open the output file. At the end of the simulation, output is directed
	115	!-- to unit 19.
	116	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	117	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	118	io = 15 ! header output on file RUN_CONTROL
	119	ELSE
	120	io = 19 ! header output on file HEADER
	121	ENDIF
	122	CALL check_open( io )
	123
	124	!
	125	!-- At the end of the run, output file (HEADER) will be rewritten with
	126	!-- new informations
	127	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	128
	129	!
	130	!-- Determine kind of model run
	131	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	132	run_classification = '3D - restart run'
[328]	133	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	134	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	135	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	136	run_classification = '3D - run without 1D - prerun'
[197]	137	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	138	run_classification = '3D - run with 1D - prerun'
[197]	139	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	140	run_classification = '3D - run initialized by user'
[1]	141	ELSE
[254]	142	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	143	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	144	ENDIF
[97]	145	IF ( ocean ) THEN
	146	run_classification = 'ocean - ' // run_classification
	147	ELSE
	148	run_classification = 'atmosphere - ' // run_classification
	149	ENDIF
[1]	150
	151	!
	152	!-- Run-identification, date, time, host
	153	host_chr = host(1:10)
[75]	154	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	155	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	156	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	157	#if defined( __mpi2 )
	158	mpi_type = 2
	159	#else
	160	mpi_type = 1
	161	#endif
	162	WRITE ( io, 101 ) mpi_type, coupling_mode
	163	ENDIF
[102]	164	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	165	ADJUSTR( host_chr )
[1]	166	#if defined( __parallel )
	167	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	168	char1 = 'calculated'
	169	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	170	host(1:2) == 'lc' ) .AND. &
	171	npex == -1 .AND. pdims(2) == 1 ) THEN
	172	char1 = 'forced'
	173	ELSE
	174	char1 = 'predefined'
	175	ENDIF
	176	IF ( threads_per_task == 1 ) THEN
[102]	177	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	178	ELSE
[102]	179	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	180	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	181	ENDIF
	182	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	183	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	184	npex == -1 .AND. pdims(2) == 1 ) &
	185	THEN
[102]	186	WRITE ( io, 106 )
[1]	187	ELSEIF ( pdims(2) == 1 ) THEN
[102]	188	WRITE ( io, 107 ) 'x'
[1]	189	ELSEIF ( pdims(1) == 1 ) THEN
[102]	190	WRITE ( io, 107 ) 'y'
[1]	191	ENDIF
[102]	192	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	193	#endif
	194	WRITE ( io, 99 )
	195
	196	!
	197	!-- Numerical schemes
	198	WRITE ( io, 110 )
	199	IF ( psolver(1:7) == 'poisfft' ) THEN
	200	WRITE ( io, 111 ) TRIM( fft_method )
	201	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	202	ELSEIF ( psolver == 'sor' ) THEN
	203	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	204	ELSEIF ( psolver == 'multigrid' ) THEN
	205	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	206	IF ( mg_cycles == -1 ) THEN
	207	WRITE ( io, 140 ) residual_limit
	208	ELSE
	209	WRITE ( io, 141 ) mg_cycles
	210	ENDIF
	211	IF ( mg_switch_to_pe0_level == 0 ) THEN
	212	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	213	nzt_mg(1)
[197]	214	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	215	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	216	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	217	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	218	nzt_mg(mg_switch_to_pe0_level), &
	219	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	220	nzt_mg(1)
	221	ENDIF
	222	ENDIF
	223	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	224	THEN
	225	WRITE ( io, 142 )
	226	ENDIF
	227
	228	IF ( momentum_advec == 'pw-scheme' ) THEN
	229	WRITE ( io, 113 )
	230	ELSE
	231	WRITE ( io, 114 )
	232	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	233	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	234	overshoot_limit_w /= 0.0 ) THEN
	235	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	236	overshoot_limit_w
	237	ENDIF
	238	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	239	ups_limit_w /= 0.0 ) &
	240	THEN
	241	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	242	ENDIF
	243	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	244	ENDIF
	245	IF ( scalar_advec == 'pw-scheme' ) THEN
	246	WRITE ( io, 116 )
	247	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	248	WRITE ( io, 117 )
	249	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	250	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	251	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	252	ENDIF
	253	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	254	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	255	ENDIF
	256	ELSE
	257	WRITE ( io, 118 )
	258	ENDIF
[63]	259
	260	WRITE ( io, 139 ) TRIM( loop_optimization )
	261
[1]	262	IF ( galilei_transformation ) THEN
	263	IF ( use_ug_for_galilei_tr ) THEN
	264	char1 = 'geostrophic wind'
	265	ELSE
	266	char1 = 'mean wind in model domain'
	267	ENDIF
	268	IF ( simulated_time_at_begin == simulated_time ) THEN
	269	char2 = 'at the start of the run'
	270	ELSE
	271	char2 = 'at the end of the run'
	272	ENDIF
	273	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	274	advected_distance_x/1000.0, advected_distance_y/1000.0
	275	ENDIF
	276	IF ( timestep_scheme == 'leapfrog' ) THEN
	277	WRITE ( io, 120 )
	278	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	279	WRITE ( io, 121 )
	280	ELSE
	281	WRITE ( io, 122 ) timestep_scheme
	282	ENDIF
[87]	283	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	284	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	285	IF ( .NOT. ocean ) THEN
	286	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	287	rayleigh_damping_factor
	288	ELSE
	289	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	290	rayleigh_damping_factor
	291	ENDIF
[1]	292	ENDIF
[75]	293	IF ( humidity ) THEN
[1]	294	IF ( .NOT. cloud_physics ) THEN
	295	WRITE ( io, 129 )
	296	ELSE
	297	WRITE ( io, 130 )
	298	WRITE ( io, 131 )
	299	IF ( radiation ) WRITE ( io, 132 )
	300	IF ( precipitation ) WRITE ( io, 133 )
	301	ENDIF
	302	ENDIF
	303	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	304	IF ( conserve_volume_flow ) THEN
[241]	305	WRITE ( io, 150 ) conserve_volume_flow_mode
	306	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	307	WRITE ( io, 151 ) u_bulk, v_bulk
	308	ENDIF
[240]	309	ELSEIF ( dp_external ) THEN
	310	IF ( dp_smooth ) THEN
[241]	311	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	312	ELSE
[241]	313	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	314	ENDIF
	315	ENDIF
[1]	316	WRITE ( io, 99 )
	317
	318	!
	319	!-- Runtime and timestep informations
	320	WRITE ( io, 200 )
	321	IF ( .NOT. dt_fixed ) THEN
	322	WRITE ( io, 201 ) dt_max, cfl_factor
	323	ELSE
	324	WRITE ( io, 202 ) dt
	325	ENDIF
	326	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	327
	328	IF ( time_restart /= 9999999.9 .AND. &
	329	simulated_time_at_begin == simulated_time ) THEN
	330	IF ( dt_restart == 9999999.9 ) THEN
	331	WRITE ( io, 204 ) ' Restart at: ',time_restart
	332	ELSE
	333	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	334	ENDIF
	335	ENDIF
	336
	337	IF ( simulated_time_at_begin /= simulated_time ) THEN
	338	i = MAX ( log_point_s(10)%counts, 1 )
	339	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	340	cpuseconds_per_simulated_second = 0.0
	341	ELSE
	342	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	343	( simulated_time - &
	344	simulated_time_at_begin )
	345	ENDIF
	346	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	347	log_point_s(10)%sum / REAL( i ), &
	348	cpuseconds_per_simulated_second
	349	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	350	IF ( dt_restart == 9999999.9 ) THEN
	351	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	352	ELSE
	353	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	354	ENDIF
	355	ENDIF
	356	ENDIF
	357
	358	!
[291]	359	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	360	!-- and ocean are used. In this case, coupling_start_time defines the time
	361	!-- when the coupling is switched on.
	362	IF ( coupling_start_time /= 0.0 ) THEN
	363	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	364	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	365	ELSE
	366	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	367	'precursor runs'
	368	ENDIF
	369	WRITE ( io, 207 ) char1, coupling_start_time
	370	ENDIF
	371
	372	!
[1]	373	!-- Computational grid
[94]	374	IF ( .NOT. ocean ) THEN
	375	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	376	IF ( dz_stretch_level_index < nzt+1 ) THEN
	377	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	378	dz_stretch_factor, dz_max
	379	ENDIF
	380	ELSE
	381	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	382	IF ( dz_stretch_level_index > 0 ) THEN
	383	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	384	dz_stretch_factor, dz_max
	385	ENDIF
[1]	386	ENDIF
	387	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	388	MIN( nnz+2, nzt+2 )
[76]	389	IF ( numprocs > 1 ) THEN
	390	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	391	WRITE ( io, 255 )
	392	ELSE
	393	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	394	ENDIF
[1]	395	ENDIF
	396	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	397
	398	!
	399	!-- Topography
	400	WRITE ( io, 270 ) topography
	401	SELECT CASE ( TRIM( topography ) )
	402
	403	CASE ( 'flat' )
	404	! no actions necessary
	405
	406	CASE ( 'single_building' )
	407	blx = INT( building_length_x / dx )
	408	bly = INT( building_length_y / dy )
	409	bh = INT( building_height / dz )
	410
	411	IF ( building_wall_left == 9999999.9 ) THEN
	412	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	413	ENDIF
	414	bxl = INT ( building_wall_left / dx + 0.5 )
	415	bxr = bxl + blx
	416
	417	IF ( building_wall_south == 9999999.9 ) THEN
	418	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	419	ENDIF
	420	bys = INT ( building_wall_south / dy + 0.5 )
	421	byn = bys + bly
	422
	423	WRITE ( io, 271 ) building_length_x, building_length_y, &
	424	building_height, bxl, bxr, bys, byn
	425
[240]	426	CASE ( 'single_street_canyon' )
	427	ch = NINT( canyon_height / dz )
	428	IF ( canyon_width_x /= 9999999.9 ) THEN
	429	!
	430	!-- Street canyon in y direction
	431	cwx = NINT( canyon_width_x / dx )
	432	IF ( canyon_wall_left == 9999999.9 ) THEN
	433	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	434	ENDIF
	435	cxl = NINT( canyon_wall_left / dx )
	436	cxr = cxl + cwx
	437	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	438
	439	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	440	!
	441	!-- Street canyon in x direction
	442	cwy = NINT( canyon_width_y / dy )
	443	IF ( canyon_wall_south == 9999999.9 ) THEN
	444	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	445	ENDIF
	446	cys = NINT( canyon_wall_south / dy )
	447	cyn = cys + cwy
	448	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	449	ENDIF
	450
[1]	451	END SELECT
	452
[256]	453	IF ( TRIM( topography ) /= 'flat' ) THEN
	454	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	455	IF ( TRIM( topography ) == 'single_building' .OR. &
	456	TRIM( topography ) == 'single_street_canyon' ) THEN
	457	WRITE ( io, 278 )
	458	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	459	WRITE ( io, 279 )
	460	ENDIF
	461	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	462	WRITE ( io, 278 )
	463	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	464	WRITE ( io, 279 )
	465	ENDIF
	466	ENDIF
	467
[138]	468	IF ( plant_canopy ) THEN
	469
	470	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	471	IF ( passive_scalar ) THEN
	472	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	473	leaf_surface_concentration
	474	ENDIF
[138]	475
[1]	476	!
[153]	477	!-- Heat flux at the top of vegetation
	478	WRITE ( io, 282 ) cthf
	479
	480	!
[138]	481	!-- Leaf area density profile
	482	!-- Building output strings, starting with surface value
	483	WRITE ( learde, '(F6.2)' ) lad_surface
	484	gradients = '------'
	485	slices = ' 0'
	486	coordinates = ' 0.0'
	487	i = 1
	488	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	489
	490	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	491	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	492
	493	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	494	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	495
	496	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	497	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	498
	499	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	500	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	501
	502	i = i + 1
	503	ENDDO
	504
[153]	505	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	506	TRIM( gradients ), TRIM( slices )
	507
	508	ENDIF
	509
	510	!
[1]	511	!-- Boundary conditions
	512	IF ( ibc_p_b == 0 ) THEN
	513	runten = 'p(0) = 0 \|'
	514	ELSEIF ( ibc_p_b == 1 ) THEN
	515	runten = 'p(0) = p(1) \|'
	516	ELSE
	517	runten = 'p(0) = p(1) +R\|'
	518	ENDIF
	519	IF ( ibc_p_t == 0 ) THEN
	520	roben = 'p(nzt+1) = 0 \|'
	521	ELSE
	522	roben = 'p(nzt+1) = p(nzt) \|'
	523	ENDIF
	524
	525	IF ( ibc_uv_b == 0 ) THEN
	526	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	527	ELSE
	528	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	529	ENDIF
[132]	530	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	531	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	532	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	533	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	534	ELSE
	535	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	536	ENDIF
	537
	538	IF ( ibc_pt_b == 0 ) THEN
	539	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	540	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	541	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	542	ELSEIF ( ibc_pt_b == 2 ) THEN
	543	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	544	ENDIF
	545	IF ( ibc_pt_t == 0 ) THEN
[19]	546	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	547	ELSEIF( ibc_pt_t == 1 ) THEN
	548	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	549	ELSEIF( ibc_pt_t == 2 ) THEN
	550	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	551	ENDIF
	552
	553	WRITE ( io, 300 ) runten, roben
	554
	555	IF ( .NOT. constant_diffusion ) THEN
	556	IF ( ibc_e_b == 1 ) THEN
	557	runten = 'e(0) = e(1)'
	558	ELSE
	559	runten = 'e(0) = e(1) = (u/0.1)*2'
	560	ENDIF
	561	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	562
[97]	563	WRITE ( io, 301 ) 'e', runten, roben
[1]	564
	565	ENDIF
	566
[97]	567	IF ( ocean ) THEN
	568	runten = 'sa(0) = sa(1)'
	569	IF ( ibc_sa_t == 0 ) THEN
	570	roben = 'sa(nzt+1) = sa_surface'
[1]	571	ELSE
[97]	572	roben = 'sa(nzt+1) = sa(nzt)'
[1]	573	ENDIF
[97]	574	WRITE ( io, 301 ) 'sa', runten, roben
	575	ENDIF
[1]	576
[97]	577	IF ( humidity ) THEN
	578	IF ( ibc_q_b == 0 ) THEN
	579	runten = 'q(0) = q_surface'
	580	ELSE
	581	runten = 'q(0) = q(1)'
	582	ENDIF
	583	IF ( ibc_q_t == 0 ) THEN
	584	roben = 'q(nzt) = q_top'
	585	ELSE
	586	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	587	ENDIF
	588	WRITE ( io, 301 ) 'q', runten, roben
	589	ENDIF
[1]	590
[97]	591	IF ( passive_scalar ) THEN
	592	IF ( ibc_q_b == 0 ) THEN
	593	runten = 's(0) = s_surface'
	594	ELSE
	595	runten = 's(0) = s(1)'
	596	ENDIF
	597	IF ( ibc_q_t == 0 ) THEN
	598	roben = 's(nzt) = s_top'
	599	ELSE
	600	roben = 's(nzt) = s(nzt-1) + ds/dz'
	601	ENDIF
	602	WRITE ( io, 301 ) 's', runten, roben
[1]	603	ENDIF
	604
	605	IF ( use_surface_fluxes ) THEN
	606	WRITE ( io, 303 )
	607	IF ( constant_heatflux ) THEN
	608	WRITE ( io, 306 ) surface_heatflux
	609	IF ( random_heatflux ) WRITE ( io, 307 )
	610	ENDIF
[75]	611	IF ( humidity .AND. constant_waterflux ) THEN
[1]	612	WRITE ( io, 311 ) surface_waterflux
	613	ENDIF
	614	IF ( passive_scalar .AND. constant_waterflux ) THEN
	615	WRITE ( io, 313 ) surface_waterflux
	616	ENDIF
	617	ENDIF
	618
[19]	619	IF ( use_top_fluxes ) THEN
	620	WRITE ( io, 304 )
[102]	621	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	622	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	623	IF ( constant_top_heatflux ) THEN
	624	WRITE ( io, 306 ) top_heatflux
	625	ENDIF
	626	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	627	WRITE ( io, 316 )
[19]	628	ENDIF
[97]	629	IF ( ocean .AND. constant_top_salinityflux ) THEN
	630	WRITE ( io, 309 ) top_salinityflux
	631	ENDIF
[75]	632	IF ( humidity .OR. passive_scalar ) THEN
[19]	633	WRITE ( io, 315 )
	634	ENDIF
	635	ENDIF
	636
[1]	637	IF ( prandtl_layer ) THEN
[94]	638	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	639	rif_min, rif_max
[1]	640	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	641	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	642	WRITE ( io, 312 )
	643	ENDIF
	644	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	645	WRITE ( io, 314 )
	646	ENDIF
	647	ELSE
	648	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	649	WRITE ( io, 310 ) rif_min, rif_max
	650	ENDIF
	651	ENDIF
	652
	653	WRITE ( io, 317 ) bc_lr, bc_ns
	654	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	655	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	656	IF ( turbulent_inflow ) THEN
	657	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	658	inflow_damping_height, inflow_damping_width
	659	ENDIF
[1]	660	ENDIF
	661
	662	!
	663	!-- Listing of 1D-profiles
[151]	664	WRITE ( io, 325 ) dt_dopr_listing
[1]	665	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	666	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	667	ENDIF
	668
	669	!
	670	!-- DATA output
	671	WRITE ( io, 330 )
	672	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	673	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	674	ENDIF
	675
	676	!
	677	!-- 1D-profiles
[254]	678	dopr_chr = 'Pofile:'
[1]	679	IF ( dopr_n /= 0 ) THEN
	680	WRITE ( io, 331 )
	681
	682	output_format = ''
	683	IF ( netcdf_output ) THEN
	684	IF ( netcdf_64bit ) THEN
	685	output_format = 'netcdf (64 bit offset)'
	686	ELSE
	687	output_format = 'netcdf'
	688	ENDIF
	689	ENDIF
	690	IF ( profil_output ) THEN
	691	IF ( netcdf_output ) THEN
	692	output_format = TRIM( output_format ) // ' and profil'
	693	ELSE
	694	output_format = 'profil'
	695	ENDIF
	696	ENDIF
[292]	697	WRITE ( io, 344 ) output_format
[1]	698
	699	DO i = 1, dopr_n
	700	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	701	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	702	WRITE ( io, 332 ) dopr_chr
	703	dopr_chr = ' :'
	704	ENDIF
	705	ENDDO
	706
	707	IF ( dopr_chr /= '' ) THEN
	708	WRITE ( io, 332 ) dopr_chr
	709	ENDIF
	710	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	711	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	712	ENDIF
	713
	714	!
	715	!-- 2D-arrays
	716	DO av = 0, 1
	717
	718	i = 1
	719	do2d_xy = ''
	720	do2d_xz = ''
	721	do2d_yz = ''
	722	DO WHILE ( do2d(av,i) /= ' ' )
	723
	724	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	725	do2d_mode = do2d(av,i)(l-1:l)
	726
	727	SELECT CASE ( do2d_mode )
	728	CASE ( 'xy' )
	729	ll = LEN_TRIM( do2d_xy )
	730	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	731	CASE ( 'xz' )
	732	ll = LEN_TRIM( do2d_xz )
	733	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	734	CASE ( 'yz' )
	735	ll = LEN_TRIM( do2d_yz )
	736	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	737	END SELECT
	738
	739	i = i + 1
	740
	741	ENDDO
	742
	743	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	744	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	745	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	746	( netcdf_output .OR. iso2d_output ) ) THEN
	747
	748	IF ( av == 0 ) THEN
	749	WRITE ( io, 334 ) ''
	750	ELSE
	751	WRITE ( io, 334 ) '(time-averaged)'
	752	ENDIF
	753
	754	IF ( do2d_at_begin ) THEN
	755	begin_chr = 'and at the start'
	756	ELSE
	757	begin_chr = ''
	758	ENDIF
	759
	760	output_format = ''
	761	IF ( netcdf_output ) THEN
	762	IF ( netcdf_64bit ) THEN
	763	output_format = 'netcdf (64 bit offset)'
	764	ELSE
	765	output_format = 'netcdf'
	766	ENDIF
	767	ENDIF
	768	IF ( iso2d_output ) THEN
	769	IF ( netcdf_output ) THEN
	770	output_format = TRIM( output_format ) // ' and iso2d'
	771	ELSE
	772	output_format = 'iso2d'
	773	ENDIF
	774	ENDIF
[292]	775	WRITE ( io, 344 ) output_format
[1]	776
	777	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	778	i = 1
	779	slices = '/'
	780	coordinates = '/'
	781	!
	782	!-- Building strings with index and coordinate informations of the
	783	!-- slices
	784	DO WHILE ( section(i,1) /= -9999 )
	785
	786	WRITE (section_chr,'(I5)') section(i,1)
	787	section_chr = ADJUSTL( section_chr )
	788	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	789
[206]	790	IF ( section(i,1) == -1 ) THEN
	791	WRITE (coor_chr,'(F10.1)') -1.0
	792	ELSE
	793	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	794	ENDIF
[1]	795	coor_chr = ADJUSTL( coor_chr )
	796	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	797
	798	i = i + 1
	799	ENDDO
	800	IF ( av == 0 ) THEN
	801	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	802	TRIM( begin_chr ), 'k', TRIM( slices ), &
	803	TRIM( coordinates )
	804	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	805	WRITE ( io, 339 ) skip_time_do2d_xy
	806	ENDIF
	807	ELSE
	808	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	809	TRIM( begin_chr ), averaging_interval, &
	810	dt_averaging_input, 'k', TRIM( slices ), &
	811	TRIM( coordinates )
	812	IF ( skip_time_data_output_av /= 0.0 ) THEN
	813	WRITE ( io, 339 ) skip_time_data_output_av
	814	ENDIF
	815	ENDIF
	816
	817	ENDIF
	818
	819	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	820	i = 1
	821	slices = '/'
	822	coordinates = '/'
	823	!
	824	!-- Building strings with index and coordinate informations of the
	825	!-- slices
	826	DO WHILE ( section(i,2) /= -9999 )
	827
	828	WRITE (section_chr,'(I5)') section(i,2)
	829	section_chr = ADJUSTL( section_chr )
	830	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	831
	832	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	833	coor_chr = ADJUSTL( coor_chr )
	834	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	835
	836	i = i + 1
	837	ENDDO
	838	IF ( av == 0 ) THEN
	839	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	840	TRIM( begin_chr ), 'j', TRIM( slices ), &
	841	TRIM( coordinates )
	842	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	843	WRITE ( io, 339 ) skip_time_do2d_xz
	844	ENDIF
	845	ELSE
	846	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	847	TRIM( begin_chr ), averaging_interval, &
	848	dt_averaging_input, 'j', TRIM( slices ), &
	849	TRIM( coordinates )
	850	IF ( skip_time_data_output_av /= 0.0 ) THEN
	851	WRITE ( io, 339 ) skip_time_data_output_av
	852	ENDIF
	853	ENDIF
	854	ENDIF
	855
	856	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	857	i = 1
	858	slices = '/'
	859	coordinates = '/'
	860	!
	861	!-- Building strings with index and coordinate informations of the
	862	!-- slices
	863	DO WHILE ( section(i,3) /= -9999 )
	864
	865	WRITE (section_chr,'(I5)') section(i,3)
	866	section_chr = ADJUSTL( section_chr )
	867	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	868
	869	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	870	coor_chr = ADJUSTL( coor_chr )
	871	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	872
	873	i = i + 1
	874	ENDDO
	875	IF ( av == 0 ) THEN
	876	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	877	TRIM( begin_chr ), 'i', TRIM( slices ), &
	878	TRIM( coordinates )
	879	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	880	WRITE ( io, 339 ) skip_time_do2d_yz
	881	ENDIF
	882	ELSE
	883	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	884	TRIM( begin_chr ), averaging_interval, &
	885	dt_averaging_input, 'i', TRIM( slices ), &
	886	TRIM( coordinates )
	887	IF ( skip_time_data_output_av /= 0.0 ) THEN
	888	WRITE ( io, 339 ) skip_time_data_output_av
	889	ENDIF
	890	ENDIF
	891	ENDIF
	892
	893	ENDIF
	894
	895	ENDDO
	896
	897	!
	898	!-- 3d-arrays
	899	DO av = 0, 1
	900
	901	i = 1
	902	do3d_chr = ''
	903	DO WHILE ( do3d(av,i) /= ' ' )
	904
	905	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	906	i = i + 1
	907
	908	ENDDO
	909
	910	IF ( do3d_chr /= '' ) THEN
	911	IF ( av == 0 ) THEN
	912	WRITE ( io, 336 ) ''
	913	ELSE
	914	WRITE ( io, 336 ) '(time-averaged)'
	915	ENDIF
	916
	917	output_format = ''
	918	IF ( netcdf_output ) THEN
[292]	919	IF ( netcdf_64bit_3d ) THEN
[1]	920	output_format = 'netcdf (64 bit offset)'
	921	ELSE
	922	output_format = 'netcdf'
	923	ENDIF
	924	ENDIF
	925	IF ( avs_output ) THEN
	926	IF ( netcdf_output ) THEN
	927	output_format = TRIM( output_format ) // ' and avs'
	928	ELSE
	929	output_format = 'avs'
	930	ENDIF
	931	ENDIF
[292]	932	WRITE ( io, 344 ) output_format
[1]	933
	934	IF ( do3d_at_begin ) THEN
	935	begin_chr = 'and at the start'
	936	ELSE
	937	begin_chr = ''
	938	ENDIF
	939	IF ( av == 0 ) THEN
	940	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	941	zu(nz_do3d), nz_do3d
	942	ELSE
	943	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	944	TRIM( begin_chr ), averaging_interval, &
	945	dt_averaging_input, zu(nz_do3d), nz_do3d
	946	ENDIF
	947
	948	IF ( do3d_compress ) THEN
	949	do3d_chr = ''
	950	i = 1
	951	DO WHILE ( do3d(av,i) /= ' ' )
	952
	953	SELECT CASE ( do3d(av,i) )
	954	CASE ( 'u' )
	955	j = 1
	956	CASE ( 'v' )
	957	j = 2
	958	CASE ( 'w' )
	959	j = 3
	960	CASE ( 'p' )
	961	j = 4
	962	CASE ( 'pt' )
	963	j = 5
	964	END SELECT
	965	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	966	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	967	':' // prec // ','
	968	i = i + 1
	969
	970	ENDDO
	971	WRITE ( io, 338 ) do3d_chr
	972
	973	ENDIF
	974
	975	IF ( av == 0 ) THEN
	976	IF ( skip_time_do3d /= 0.0 ) THEN
	977	WRITE ( io, 339 ) skip_time_do3d
	978	ENDIF
	979	ELSE
	980	IF ( skip_time_data_output_av /= 0.0 ) THEN
	981	WRITE ( io, 339 ) skip_time_data_output_av
	982	ENDIF
	983	ENDIF
	984
	985	ENDIF
	986
	987	ENDDO
	988
	989	!
	990	!-- Timeseries
	991	IF ( dt_dots /= 9999999.9 ) THEN
	992	WRITE ( io, 340 )
	993
	994	output_format = ''
	995	IF ( netcdf_output ) THEN
	996	IF ( netcdf_64bit ) THEN
	997	output_format = 'netcdf (64 bit offset)'
	998	ELSE
	999	output_format = 'netcdf'
	1000	ENDIF
	1001	ENDIF
	1002	IF ( profil_output ) THEN
	1003	IF ( netcdf_output ) THEN
	1004	output_format = TRIM( output_format ) // ' and profil'
	1005	ELSE
	1006	output_format = 'profil'
	1007	ENDIF
	1008	ENDIF
[292]	1009	WRITE ( io, 344 ) output_format
[1]	1010	WRITE ( io, 341 ) dt_dots
	1011	ENDIF
	1012
	1013	#if defined( __dvrp_graphics )
	1014	!
	1015	!-- Dvrp-output
	1016	IF ( dt_dvrp /= 9999999.9 ) THEN
	1017	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1018	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1019	i = 1
	1020	l = 0
[336]	1021	m = 0
[1]	1022	DO WHILE ( mode_dvrp(i) /= ' ' )
	1023	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1024	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1025	l = l + 1
	1026	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1027	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1028	isosurface_color(:,l)
[1]	1029	ENDIF
	1030	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1031	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1032	m = m + 1
	1033	IF ( do2d(0,j) /= ' ' ) THEN
	1034	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1035	slicer_range_limits_dvrp(:,m)
	1036	ENDIF
[1]	1037	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1038	WRITE ( io, 363 ) dvrp_psize
	1039	IF ( particle_dvrpsize /= 'none' ) THEN
	1040	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1041	dvrpsize_interval
	1042	ENDIF
	1043	IF ( particle_color /= 'none' ) THEN
	1044	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1045	color_interval
	1046	ENDIF
[1]	1047	ENDIF
	1048	i = i + 1
	1049	ENDDO
[237]	1050
[336]	1051	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1052	superelevation_y, superelevation, clip_dvrp_l, &
	1053	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1054
	1055	IF ( TRIM( topography ) /= 'flat' ) THEN
	1056	WRITE ( io, 366 ) topography_color
	1057	IF ( cluster_size > 1 ) THEN
	1058	WRITE ( io, 367 ) cluster_size
	1059	ENDIF
[237]	1060	ENDIF
	1061
[1]	1062	ENDIF
	1063	#endif
	1064
	1065	#if defined( __spectra )
	1066	!
	1067	!-- Spectra output
	1068	IF ( dt_dosp /= 9999999.9 ) THEN
	1069	WRITE ( io, 370 )
	1070
	1071	output_format = ''
	1072	IF ( netcdf_output ) THEN
	1073	IF ( netcdf_64bit ) THEN
	1074	output_format = 'netcdf (64 bit offset)'
	1075	ELSE
	1076	output_format = 'netcdf'
	1077	ENDIF
	1078	ENDIF
	1079	IF ( profil_output ) THEN
	1080	IF ( netcdf_output ) THEN
	1081	output_format = TRIM( output_format ) // ' and profil'
	1082	ELSE
	1083	output_format = 'profil'
	1084	ENDIF
	1085	ENDIF
[292]	1086	WRITE ( io, 344 ) output_format
[1]	1087	WRITE ( io, 371 ) dt_dosp
	1088	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1089	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1090	( spectra_direction(i), i = 1,10 ), &
[189]	1091	( comp_spectra_level(i), i = 1,100 ), &
	1092	( plot_spectra_level(i), i = 1,100 ), &
[1]	1093	averaging_interval_sp, dt_averaging_input_pr
	1094	ENDIF
	1095	#endif
	1096
	1097	WRITE ( io, 99 )
	1098
	1099	!
	1100	!-- Physical quantities
	1101	WRITE ( io, 400 )
	1102
	1103	!
	1104	!-- Geostrophic parameters
	1105	WRITE ( io, 410 ) omega, phi, f, fs
	1106
	1107	!
	1108	!-- Other quantities
	1109	WRITE ( io, 411 ) g
[97]	1110	IF ( use_reference ) THEN
	1111	IF ( ocean ) THEN
	1112	WRITE ( io, 412 ) prho_reference
	1113	ELSE
	1114	WRITE ( io, 413 ) pt_reference
	1115	ENDIF
	1116	ENDIF
[1]	1117
	1118	!
	1119	!-- Cloud physics parameters
	1120	IF ( cloud_physics ) THEN
[57]	1121	WRITE ( io, 415 )
	1122	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1123	ENDIF
	1124
	1125	!-- Profile of the geostrophic wind (component ug)
	1126	!-- Building output strings
	1127	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1128	gradients = '------'
	1129	slices = ' 0'
	1130	coordinates = ' 0.0'
	1131	i = 1
	1132	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1133
[167]	1134	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1135	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1136
[167]	1137	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1138	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1139
[167]	1140	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1141	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1142
[167]	1143	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1144	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1145
	1146	i = i + 1
	1147	ENDDO
	1148
	1149	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1150	TRIM( gradients ), TRIM( slices )
	1151
	1152	!-- Profile of the geostrophic wind (component vg)
	1153	!-- Building output strings
	1154	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1155	gradients = '------'
	1156	slices = ' 0'
	1157	coordinates = ' 0.0'
	1158	i = 1
	1159	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1160
[167]	1161	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1162	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1163
[167]	1164	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1165	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1166
[167]	1167	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1168	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1169
[167]	1170	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1171	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1172
	1173	i = i + 1
	1174	ENDDO
	1175
	1176	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1177	TRIM( gradients ), TRIM( slices )
	1178
	1179	!
	1180	!-- Initial temperature profile
	1181	!-- Building output strings, starting with surface temperature
	1182	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1183	gradients = '------'
	1184	slices = ' 0'
	1185	coordinates = ' 0.0'
	1186	i = 1
	1187	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1188
[94]	1189	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1190	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1191
[94]	1192	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1193	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1194
[94]	1195	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1196	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1197
[94]	1198	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1199	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1200
	1201	i = i + 1
	1202	ENDDO
	1203
	1204	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1205	TRIM( gradients ), TRIM( slices )
	1206
	1207	!
	1208	!-- Initial humidity profile
	1209	!-- Building output strings, starting with surface humidity
[75]	1210	IF ( humidity .OR. passive_scalar ) THEN
[1]	1211	WRITE ( temperatures, '(E8.1)' ) q_surface
	1212	gradients = '--------'
	1213	slices = ' 0'
	1214	coordinates = ' 0.0'
	1215	i = 1
	1216	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1217
	1218	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1219	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1220
	1221	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1222	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1223
	1224	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1225	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1226
	1227	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1228	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1229
	1230	i = i + 1
	1231	ENDDO
	1232
[75]	1233	IF ( humidity ) THEN
[1]	1234	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1235	TRIM( gradients ), TRIM( slices )
	1236	ELSE
	1237	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1238	TRIM( gradients ), TRIM( slices )
	1239	ENDIF
	1240	ENDIF
	1241
	1242	!
[97]	1243	!-- Initial salinity profile
	1244	!-- Building output strings, starting with surface salinity
	1245	IF ( ocean ) THEN
	1246	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1247	gradients = '------'
	1248	slices = ' 0'
	1249	coordinates = ' 0.0'
	1250	i = 1
	1251	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1252
	1253	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1254	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1255
	1256	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1257	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1258
	1259	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1260	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1261
	1262	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1263	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1264
	1265	i = i + 1
	1266	ENDDO
	1267
	1268	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1269	TRIM( gradients ), TRIM( slices )
	1270	ENDIF
	1271
	1272	!
[1]	1273	!-- LES / turbulence parameters
	1274	WRITE ( io, 450 )
	1275
	1276	!--
	1277	! ... LES-constants used must still be added here
	1278	!--
	1279	IF ( constant_diffusion ) THEN
	1280	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1281	prandtl_number
	1282	ENDIF
	1283	IF ( .NOT. constant_diffusion) THEN
[108]	1284	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1285	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1286	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1287	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1288	ENDIF
	1289
	1290	!
	1291	!-- Special actions during the run
	1292	WRITE ( io, 470 )
	1293	IF ( create_disturbances ) THEN
	1294	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1295	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1296	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1297	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1298	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1299	ELSE
	1300	WRITE ( io, 473 ) disturbance_energy_limit
	1301	ENDIF
	1302	WRITE ( io, 474 ) TRIM( random_generator )
	1303	ENDIF
	1304	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1305	WRITE ( io, 475 ) pt_surface_initial_change
	1306	ENDIF
[75]	1307	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1308	WRITE ( io, 476 ) q_surface_initial_change
	1309	ENDIF
	1310	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1311	WRITE ( io, 477 ) q_surface_initial_change
	1312	ENDIF
	1313
[60]	1314	IF ( particle_advection ) THEN
[1]	1315	!
[60]	1316	!-- Particle attributes
	1317	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1318	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1319	end_time_prel, dt_sort_particles
[60]	1320	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1321	IF ( random_start_position ) WRITE ( io, 481 )
	1322	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1323	WRITE ( io, 495 ) total_number_of_particles
	1324	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1325	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1326	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1327	WRITE ( io, 484 ) total_number_of_tails, &
	1328	minimum_tailpoint_distance, &
	1329	maximum_tailpoint_age
	1330	ENDIF
[1]	1331	ENDIF
[60]	1332	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1333	WRITE ( io, 485 ) dt_write_particle_data
	1334	output_format = ''
	1335	IF ( netcdf_output ) THEN
	1336	IF ( netcdf_64bit ) THEN
	1337	output_format = 'netcdf (64 bit offset) and binary'
	1338	ELSE
	1339	output_format = 'netcdf and binary'
	1340	ENDIF
[1]	1341	ELSE
[60]	1342	output_format = 'binary'
[1]	1343	ENDIF
[292]	1344	WRITE ( io, 344 ) output_format
[1]	1345	ENDIF
[60]	1346	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1347	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1348
[60]	1349	WRITE ( io, 487 ) number_of_particle_groups
[1]	1350
[60]	1351	DO i = 1, number_of_particle_groups
	1352	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1353	WRITE ( io, 490 ) i, 0.0
	1354	WRITE ( io, 492 )
[1]	1355	ELSE
[60]	1356	WRITE ( io, 490 ) i, radius(i)
	1357	IF ( density_ratio(i) /= 0.0 ) THEN
	1358	WRITE ( io, 491 ) density_ratio(i)
	1359	ELSE
	1360	WRITE ( io, 492 )
	1361	ENDIF
[1]	1362	ENDIF
[60]	1363	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1364	pdx(i), pdy(i), pdz(i)
[336]	1365	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1366	ENDDO
[1]	1367
[60]	1368	ENDIF
[1]	1369
[60]	1370
[1]	1371	!
	1372	!-- Parameters of 1D-model
	1373	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1374	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1375	mixing_length_1d, dissipation_1d
	1376	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1377	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1378	ENDIF
	1379	ENDIF
	1380
	1381	!
	1382	!-- User-defined informations
	1383	CALL user_header( io )
	1384
	1385	WRITE ( io, 99 )
	1386
	1387	!
	1388	!-- Write buffer contents to disc immediately
[82]	1389	CALL local_flush( io )
[1]	1390
	1391	!
	1392	!-- Here the FORMATs start
	1393
	1394	99 FORMAT (1X,78('-'))
[200]	1395	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1396	1X,'* ',A,' *',9X,A/ &
	1397	1X,'***************************',9X,42('-'))
[291]	1398	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1399	37X,42('-'))
[200]	1400	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1401	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1402	' Run on host: ',A10)
[1]	1403	#if defined( __parallel )
[200]	1404	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1405	')',1X,A)
[200]	1406	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1407	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1408	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1409	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1410	37X,'because the job is running on an SMP-cluster')
[102]	1411	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1412	#endif
	1413	110 FORMAT (/' Numerical Schemes:'/ &
	1414	' -----------------'/)
	1415	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1416	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1417	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1418	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1419	' or Upstream')
	1420	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1421	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1422	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1423	' or Upstream')
	1424	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1425	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1426	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1427	' Translation velocity = ',A/ &
	1428	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1429	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1430	' of timestep changes)')
	1431	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1432	' timestep changes')
	1433	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1434	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1435	' maximum damping coefficient: ',F5.3, ' 1/s')
	1436	124 FORMAT (' Spline-overshoots are being suppressed')
	1437	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1438	' of'/ &
	1439	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1440	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1441	' of'/ &
	1442	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1443	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1444	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1445	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1446	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1447	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1448	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1449	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1450	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1451	' effective emissivity scheme')
	1452	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1453	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1454	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1455	A,'-cycle)'/ &
	1456	' number of grid levels: ',I2/ &
	1457	' Gauss-Seidel red/black iterations: ',I2)
	1458	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1459	I3,')')
	1460	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1461	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1462	I3,')'/ &
	1463	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1464	I3,')')
	1465	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1466	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1467	140 FORMAT (' maximum residual allowed: ',E10.3)
	1468	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1469	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1470	'step')
[87]	1471	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1472	'kinetic energy')
[1]	1473	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1474	'conserved'/ &
	1475	' using the ',A,' mode')
	1476	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1477	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1478	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1479	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1480	200 FORMAT (//' Run time and time step information:'/ &
	1481	' ----------------------------------'/)
	1482	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1483	' CFL-factor: ',F4.2)
	1484	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1485	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1486	' End time: ',F9.3,' s')
	1487	204 FORMAT ( A,F9.3,' s')
	1488	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1489	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1490	' CPU-time used: ',F9.3,' s per timestep: ', &
	1491	' ',F9.3,' s'/ &
	1492	' per second of simulated tim', &
	1493	'e: ',F9.3,' s')
[291]	1494	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1495	250 FORMAT (//' Computational grid and domain size:'/ &
	1496	' ----------------------------------'// &
	1497	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1498	' m dz = ',F7.3,' m'/ &
	1499	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1500	' m z(u) = ',F10.3,' m'/)
	1501	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1502	' factor: ',F5.3/ &
	1503	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1504	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1505	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1506	255 FORMAT (' Subdomains have equal size')
	1507	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1508	'have smaller sizes'/ &
	1509	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1510	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1511	' degrees')
	1512	270 FORMAT (//' Topography informations:'/ &
	1513	' -----------------------'// &
	1514	1X,'Topography: ',A)
	1515	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1516	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1517	' / ',I4)
[240]	1518	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1519	' direction' / &
	1520	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1521	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1522	278 FORMAT (' Topography grid definition convention:'/ &
	1523	' cell edge (staggered grid points'/ &
	1524	' (u in x-direction, v in y-direction))' /)
	1525	279 FORMAT (' Topography grid definition convention:'/ &
	1526	' cell center (scalar grid points)' /)
[138]	1527	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1528	' ------------------------------'// &
	1529	' Canopy mode: ', A / &
	1530	' Canopy top: ',I4 / &
	1531	' Leaf drag coefficient: ',F6.2 /)
[153]	1532	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1533	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1534	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1535	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1536	' Height: ',A,' m'/ &
	1537	' Leaf area density: ',A,' m2/m3'/ &
	1538	' Gradient: ',A,' m2/m4'/ &
	1539	' Gridpoint: ',A)
	1540
[1]	1541	300 FORMAT (//' Boundary conditions:'/ &
	1542	' -------------------'// &
	1543	' p uv ', &
	1544	' pt'// &
	1545	' B. bound.: ',A/ &
	1546	' T. bound.: ',A)
[97]	1547	301 FORMAT (/' ',A// &
[1]	1548	' B. bound.: ',A/ &
	1549	' T. bound.: ',A)
[19]	1550	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1551	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1552	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1553	'computational u,v-level:'// &
[1]	1554	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1555	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1556	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1557	307 FORMAT (' Heatflux has a random normal distribution')
	1558	308 FORMAT (' Predefined surface temperature')
[97]	1559	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1560	310 FORMAT (//' 1D-Model:'// &
	1561	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1562	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1563	312 FORMAT (' Predefined surface humidity')
	1564	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1565	314 FORMAT (' Predefined scalar value at the surface')
[19]	1566	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1567	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1568	'atmosphere model')
[1]	1569	317 FORMAT (//' Lateral boundaries:'/ &
	1570	' left/right: ',A/ &
	1571	' north/south: ',A)
	1572	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1573	'max =',F5.1,' m**2/s')
[151]	1574	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1575	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1576	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1577	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1578	' v: ',F9.6,' m2/s2')
[151]	1579	325 FORMAT (//' List output:'/ &
[1]	1580	' -----------'// &
	1581	' 1D-Profiles:'/ &
	1582	' Output every ',F8.2,' s')
[151]	1583	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1584	' Averaging input every ',F8.2,' s')
	1585	330 FORMAT (//' Data output:'/ &
	1586	' -----------'/)
	1587	331 FORMAT (/' 1D-Profiles:')
	1588	332 FORMAT (/' ',A)
	1589	333 FORMAT (' Output every ',F8.2,' s',/ &
	1590	' Time averaged over ',F8.2,' s'/ &
	1591	' Averaging input every ',F8.2,' s')
	1592	334 FORMAT (/' 2D-Arrays',A,':')
	1593	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1594	' Output every ',F8.2,' s ',A/ &
	1595	' Cross sections at ',A1,' = ',A/ &
	1596	' scalar-coordinates: ',A,' m'/)
	1597	336 FORMAT (/' 3D-Arrays',A,':')
	1598	337 FORMAT (/' Arrays: ',A/ &
	1599	' Output every ',F8.2,' s ',A/ &
	1600	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1601	338 FORMAT (' Compressed data output'/ &
	1602	' Decimal precision: ',A/)
	1603	339 FORMAT (' No output during initial ',F8.2,' s')
	1604	340 FORMAT (/' Time series:')
	1605	341 FORMAT (' Output every ',F8.2,' s'/)
	1606	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1607	' Output every ',F8.2,' s ',A/ &
	1608	' Time averaged over ',F8.2,' s'/ &
	1609	' Averaging input every ',F8.2,' s'/ &
	1610	' Cross sections at ',A1,' = ',A/ &
	1611	' scalar-coordinates: ',A,' m'/)
	1612	343 FORMAT (/' Arrays: ',A/ &
	1613	' Output every ',F8.2,' s ',A/ &
	1614	' Time averaged over ',F8.2,' s'/ &
	1615	' Averaging input every ',F8.2,' s'/ &
	1616	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1617	344 FORMAT (' Output format: ',A/)
[1]	1618	#if defined( __dvrp_graphics )
	1619	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1620	' Output every ',F7.1,' s'/ &
	1621	' Output mode: ',A/ &
	1622	' Host / User: ',A,' / ',A/ &
	1623	' Directory: ',A// &
	1624	' The sequence contains:')
[337]	1625	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1626	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1627	362 FORMAT (/' Slicer plane ',A/ &
[336]	1628	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1629	363 FORMAT (/' Particles'/ &
[336]	1630	' particle size: ',F7.2,' m')
	1631	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1632	F6.2,',',F6.2,']')
[337]	1633	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1634	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1635	')'/ &
	1636	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1637	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1638	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1639	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1640	#endif
	1641	#if defined( __spectra )
	1642	370 FORMAT (' Spectra:')
	1643	371 FORMAT (' Output every ',F7.1,' s'/)
	1644	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1645	' Directions: ', 10(A5,',')/ &
[189]	1646	' height levels k = ', 20(I3,',')/ &
	1647	' ', 20(I3,',')/ &
	1648	' ', 20(I3,',')/ &
	1649	' ', 20(I3,',')/ &
	1650	' ', 19(I3,','),I3,'.'/ &
[1]	1651	' height levels selected for standard plot:'/ &
[189]	1652	' k = ', 20(I3,',')/ &
	1653	' ', 20(I3,',')/ &
	1654	' ', 20(I3,',')/ &
	1655	' ', 20(I3,',')/ &
	1656	' ', 19(I3,','),I3,'.'/ &
[1]	1657	' Time averaged over ', F7.1, ' s,' / &
	1658	' Profiles for the time averaging are taken every ', &
	1659	F6.1,' s')
	1660	#endif
	1661	400 FORMAT (//' Physical quantities:'/ &
	1662	' -------------------'/)
	1663	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1664	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1665	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1666	' f* = ',F9.6,' 1/s')
	1667	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1668	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1669	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1670	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1671	' ------------------------'/)
[57]	1672	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1673	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1674	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1675	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1676	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1677	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1678	' Height: ',A,' m'/ &
	1679	' Temperature: ',A,' K'/ &
	1680	' Gradient: ',A,' K/100m'/ &
	1681	' Gridpoint: ',A)
	1682	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1683	' Height: ',A,' m'/ &
	1684	' Humidity: ',A,' kg/kg'/ &
	1685	' Gradient: ',A,' (kg/kg)/100m'/ &
	1686	' Gridpoint: ',A)
	1687	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1688	' Height: ',A,' m'/ &
	1689	' Scalar concentration: ',A,' kg/m**3'/ &
	1690	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1691	' Gridpoint: ',A)
	1692	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1693	' Height: ',A,' m'/ &
	1694	' ug: ',A,' m/s'/ &
	1695	' Gradient: ',A,' 1/100s'/ &
	1696	' Gridpoint: ',A)
	1697	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1698	' Height: ',A,' m'/ &
[97]	1699	' vg: ',A,' m/s'/ &
[1]	1700	' Gradient: ',A,' 1/100s'/ &
	1701	' Gridpoint: ',A)
[97]	1702	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1703	' Height: ',A,' m'/ &
	1704	' Salinity: ',A,' psu'/ &
	1705	' Gradient: ',A,' psu/100m'/ &
	1706	' Gridpoint: ',A)
[1]	1707	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1708	' ---------------------------'/)
	1709	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1710	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1711	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1712	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1713	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1714	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1715	470 FORMAT (//' Actions during the simulation:'/ &
	1716	' -----------------------------'/)
[94]	1717	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1718	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1719	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1720	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1721	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1722	' to i/j =',I4)
	1723	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1724	1X,F5.3, ' m2/s2')
	1725	474 FORMAT (' Random number generator used : ',A/)
	1726	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1727	'respectively, if'/ &
	1728	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1729	' 3D-simulation'/)
	1730	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1731	'respectively, if the'/ &
	1732	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1733	' the 3D-simulation'/)
	1734	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1735	'respectively, if the'/ &
	1736	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1737	' the 3D-simulation'/)
	1738	480 FORMAT (' Particles:'/ &
	1739	' ---------'// &
	1740	' Particle advection is active (switched on at t = ', F7.1, &
	1741	' s)'/ &
	1742	' Start of new particle generations every ',F6.1,' s'/ &
	1743	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1744	' bottom: ', A, ' top: ', A/&
	1745	' Maximum particle age: ',F9.1,' s'/ &
[117]	1746	' Advection stopped at t = ',F9.1,' s'/ &
	1747	' Particles are sorted every ',F9.1,' s'/)
[1]	1748	481 FORMAT (' Particles have random start positions'/)
[336]	1749	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1750	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1751	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1752	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1753	' Maximum age of the end of the tail: ',F8.2,' s')
	1754	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1755	486 FORMAT (' Particle statistics are written on file'/)
	1756	487 FORMAT (' Number of particle groups: ',I2/)
	1757	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1758	' minimum timestep for advection: ', F7.5/)
	1759	489 FORMAT (' Number of particles simultaneously released at each ', &
	1760	'point: ', I5/)
	1761	490 FORMAT (' Particle group ',I2,':'/ &
	1762	' Particle radius: ',E10.3, 'm')
	1763	491 FORMAT (' Particle inertia is activated'/ &
	1764	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1765	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1766	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1767	' y:',F8.1,' - ',F8.1,' m'/&
	1768	' z:',F8.1,' - ',F8.1,' m'/&
	1769	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1770	' m dz = ',F8.1,' m'/)
	1771	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1772	F8.2,' s'/)
	1773	495 FORMAT (' Number of particles in total domain: ',I10/)
	1774	500 FORMAT (//' 1D-Model parameters:'/ &
	1775	' -------------------'// &
	1776	' Simulation time: ',F8.1,' s'/ &
	1777	' Run-controll output every: ',F8.1,' s'/ &
	1778	' Vertical profile output every: ',F8.1,' s'/ &
	1779	' Mixing length calculation: ',A/ &
	1780	' Dissipation calculation: ',A/)
	1781	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1782
	1783
	1784	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |