Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 324

Last change on this file since 324 was 306, checked in by letzel, 16 years ago
Typographical error (mrun) Use option -p for all scp calls (batch_scp) Modified output format (header)
Property svn:keywords set to `Id`
File size: 67.4 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[291]	6	! Coupling with independent precursor runs.
[254]	7	! Output of messages replaced by message handling routine.
[237]	8	! Output of cluster_size
[240]	9	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	10	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	11	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	12	! topography_grid_convention moved from user_header
[292]	13	! small bugfix concerning 3d 64bit netcdf output format
[1]	14	!
	15	! Former revisions:
	16	! -----------------
[3]	17	! $Id: header.f90 306 2009-04-27 14:11:40Z weinreis $
[39]	18	!
[226]	19	! 206 2008-10-13 14:59:11Z raasch
	20	! Bugfix: error in zu index in case of section_xy = -1
	21	!
[200]	22	! 198 2008-09-17 08:55:28Z raasch
	23	! Format adjustments allowing output of larger revision numbers
	24	!
[198]	25	! 197 2008-09-16 15:29:03Z raasch
	26	! allow 100 spectra levels instead of 10 for consistency with
	27	! define_netcdf_header,
	28	! bugfix in the output of the characteristic levels of potential temperature,
	29	! geostrophic wind, scalar concentration, humidity and leaf area density,
	30	! output of turbulence recycling informations
	31	!
[139]	32	! 138 2007-11-28 10:03:58Z letzel
	33	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	34	! Allow two instead of one digit to specify isosurface and slicer variables.
	35	! Output of sorting frequency of particles
	36	!
[110]	37	! 108 2007-08-24 15:10:38Z letzel
	38	! Output of informations for coupled model runs (boundary conditions etc.)
	39	! + output of momentumfluxes at the top boundary
	40	! Rayleigh damping for ocean, e_init
	41	!
[98]	42	! 97 2007-06-21 08:23:15Z raasch
	43	! Adjustments for the ocean version.
	44	! use_pt_reference renamed use_reference
	45	!
[90]	46	! 87 2007-05-22 15:46:47Z raasch
	47	! Bugfix: output of use_upstream_for_tke
	48	!
[83]	49	! 82 2007-04-16 15:40:52Z raasch
	50	! Preprocessor strings for different linux clusters changed to "lc",
	51	! routine local_flush is used for buffer flushing
	52	!
[77]	53	! 76 2007-03-29 00:58:32Z raasch
	54	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	55	! output of the loop optimization method, moisture renamed humidity,
	56	! output of subversion revision number
	57	!
[39]	58	! 19 2007-02-23 04:53:48Z raasch
	59	! Output of scalar flux applied at top boundary
	60	!
[3]	61	! RCS Log replace by Id keyword, revision history cleaned up
	62	!
[1]	63	! Revision 1.63 2006/08/22 13:53:13 raasch
	64	! Output of dz_max
	65	!
	66	! Revision 1.1 1997/08/11 06:17:20 raasch
	67	! Initial revision
	68	!
	69	!
	70	! Description:
	71	! ------------
	72	! Writing a header with all important informations about the actual run.
	73	! This subroutine is called three times, two times at the beginning
	74	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	75	! end of the run, then writing additional information about CPU-usage on file
	76	! header.
	77	!------------------------------------------------------------------------------!
	78
	79	USE arrays_3d
	80	USE control_parameters
	81	USE cloud_parameters
	82	USE cpulog
	83	USE dvrp_variables
	84	USE grid_variables
	85	USE indices
	86	USE model_1d
	87	USE particle_attributes
	88	USE pegrid
	89	USE spectrum
	90
	91	IMPLICIT NONE
	92
	93	CHARACTER (LEN=1) :: prec
	94	CHARACTER (LEN=2) :: do2d_mode
	95	CHARACTER (LEN=5) :: section_chr
	96	CHARACTER (LEN=9) :: time_to_string
	97	CHARACTER (LEN=10) :: coor_chr, host_chr
	98	CHARACTER (LEN=16) :: begin_chr
[200]	99	CHARACTER (LEN=23) :: ver_rev
[1]	100	CHARACTER (LEN=40) :: output_format
[167]	101	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	102	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	103	run_classification
	104	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	105	temperatures, ugcomponent, vgcomponent
[1]	106	CHARACTER (LEN=85) :: roben, runten
	107
[240]	108	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
[291]	109	cyn, cys, i, ihost, io, j, l, ll, mpi_type
[1]	110	REAL :: cpuseconds_per_simulated_second
	111
	112	!
	113	!-- Open the output file. At the end of the simulation, output is directed
	114	!-- to unit 19.
	115	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	116	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	117	io = 15 ! header output on file RUN_CONTROL
	118	ELSE
	119	io = 19 ! header output on file HEADER
	120	ENDIF
	121	CALL check_open( io )
	122
	123	!
	124	!-- At the end of the run, output file (HEADER) will be rewritten with
	125	!-- new informations
	126	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	127
	128	!
	129	!-- Determine kind of model run
	130	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	131	run_classification = '3D - restart run'
[147]	132	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	133	run_classification = '3D - run using 3D - prerun data'
	134	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	135	run_classification = '3D - run without 1D - prerun'
[197]	136	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	137	run_classification = '3D - run with 1D - prerun'
[197]	138	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	139	run_classification = '3D - run initialized by user'
[1]	140	ELSE
[254]	141	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	142	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	143	ENDIF
[97]	144	IF ( ocean ) THEN
	145	run_classification = 'ocean - ' // run_classification
	146	ELSE
	147	run_classification = 'atmosphere - ' // run_classification
	148	ENDIF
[1]	149
	150	!
	151	!-- Run-identification, date, time, host
	152	host_chr = host(1:10)
[75]	153	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	154	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	155	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	156	#if defined( __mpi2 )
	157	mpi_type = 2
	158	#else
	159	mpi_type = 1
	160	#endif
	161	WRITE ( io, 101 ) mpi_type, coupling_mode
	162	ENDIF
[102]	163	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	164	ADJUSTR( host_chr )
[1]	165	#if defined( __parallel )
	166	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	167	char1 = 'calculated'
	168	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	169	host(1:2) == 'lc' ) .AND. &
	170	npex == -1 .AND. pdims(2) == 1 ) THEN
	171	char1 = 'forced'
	172	ELSE
	173	char1 = 'predefined'
	174	ENDIF
	175	IF ( threads_per_task == 1 ) THEN
[102]	176	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	177	ELSE
[102]	178	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	179	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	180	ENDIF
	181	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	182	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	183	npex == -1 .AND. pdims(2) == 1 ) &
	184	THEN
[102]	185	WRITE ( io, 106 )
[1]	186	ELSEIF ( pdims(2) == 1 ) THEN
[102]	187	WRITE ( io, 107 ) 'x'
[1]	188	ELSEIF ( pdims(1) == 1 ) THEN
[102]	189	WRITE ( io, 107 ) 'y'
[1]	190	ENDIF
[102]	191	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	192	#endif
	193	WRITE ( io, 99 )
	194
	195	!
	196	!-- Numerical schemes
	197	WRITE ( io, 110 )
	198	IF ( psolver(1:7) == 'poisfft' ) THEN
	199	WRITE ( io, 111 ) TRIM( fft_method )
	200	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	201	ELSEIF ( psolver == 'sor' ) THEN
	202	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	203	ELSEIF ( psolver == 'multigrid' ) THEN
	204	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	205	IF ( mg_cycles == -1 ) THEN
	206	WRITE ( io, 140 ) residual_limit
	207	ELSE
	208	WRITE ( io, 141 ) mg_cycles
	209	ENDIF
	210	IF ( mg_switch_to_pe0_level == 0 ) THEN
	211	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	212	nzt_mg(1)
[197]	213	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	214	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	215	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	216	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	217	nzt_mg(mg_switch_to_pe0_level), &
	218	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	219	nzt_mg(1)
	220	ENDIF
	221	ENDIF
	222	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	223	THEN
	224	WRITE ( io, 142 )
	225	ENDIF
	226
	227	IF ( momentum_advec == 'pw-scheme' ) THEN
	228	WRITE ( io, 113 )
	229	ELSE
	230	WRITE ( io, 114 )
	231	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	232	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	233	overshoot_limit_w /= 0.0 ) THEN
	234	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	235	overshoot_limit_w
	236	ENDIF
	237	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	238	ups_limit_w /= 0.0 ) &
	239	THEN
	240	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	241	ENDIF
	242	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	243	ENDIF
	244	IF ( scalar_advec == 'pw-scheme' ) THEN
	245	WRITE ( io, 116 )
	246	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	247	WRITE ( io, 117 )
	248	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	249	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	250	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	251	ENDIF
	252	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	253	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	254	ENDIF
	255	ELSE
	256	WRITE ( io, 118 )
	257	ENDIF
[63]	258
	259	WRITE ( io, 139 ) TRIM( loop_optimization )
	260
[1]	261	IF ( galilei_transformation ) THEN
	262	IF ( use_ug_for_galilei_tr ) THEN
	263	char1 = 'geostrophic wind'
	264	ELSE
	265	char1 = 'mean wind in model domain'
	266	ENDIF
	267	IF ( simulated_time_at_begin == simulated_time ) THEN
	268	char2 = 'at the start of the run'
	269	ELSE
	270	char2 = 'at the end of the run'
	271	ENDIF
	272	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	273	advected_distance_x/1000.0, advected_distance_y/1000.0
	274	ENDIF
	275	IF ( timestep_scheme == 'leapfrog' ) THEN
	276	WRITE ( io, 120 )
	277	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	278	WRITE ( io, 121 )
	279	ELSE
	280	WRITE ( io, 122 ) timestep_scheme
	281	ENDIF
[87]	282	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	283	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	284	IF ( .NOT. ocean ) THEN
	285	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	286	rayleigh_damping_factor
	287	ELSE
	288	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	289	rayleigh_damping_factor
	290	ENDIF
[1]	291	ENDIF
[75]	292	IF ( humidity ) THEN
[1]	293	IF ( .NOT. cloud_physics ) THEN
	294	WRITE ( io, 129 )
	295	ELSE
	296	WRITE ( io, 130 )
	297	WRITE ( io, 131 )
	298	IF ( radiation ) WRITE ( io, 132 )
	299	IF ( precipitation ) WRITE ( io, 133 )
	300	ENDIF
	301	ENDIF
	302	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	303	IF ( conserve_volume_flow ) THEN
[241]	304	WRITE ( io, 150 ) conserve_volume_flow_mode
	305	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	306	WRITE ( io, 151 ) u_bulk, v_bulk
	307	ENDIF
[240]	308	ELSEIF ( dp_external ) THEN
	309	IF ( dp_smooth ) THEN
[241]	310	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	311	ELSE
[241]	312	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	313	ENDIF
	314	ENDIF
[1]	315	WRITE ( io, 99 )
	316
	317	!
	318	!-- Runtime and timestep informations
	319	WRITE ( io, 200 )
	320	IF ( .NOT. dt_fixed ) THEN
	321	WRITE ( io, 201 ) dt_max, cfl_factor
	322	ELSE
	323	WRITE ( io, 202 ) dt
	324	ENDIF
	325	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	326
	327	IF ( time_restart /= 9999999.9 .AND. &
	328	simulated_time_at_begin == simulated_time ) THEN
	329	IF ( dt_restart == 9999999.9 ) THEN
	330	WRITE ( io, 204 ) ' Restart at: ',time_restart
	331	ELSE
	332	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	333	ENDIF
	334	ENDIF
	335
	336	IF ( simulated_time_at_begin /= simulated_time ) THEN
	337	i = MAX ( log_point_s(10)%counts, 1 )
	338	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	339	cpuseconds_per_simulated_second = 0.0
	340	ELSE
	341	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	342	( simulated_time - &
	343	simulated_time_at_begin )
	344	ENDIF
	345	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	346	log_point_s(10)%sum / REAL( i ), &
	347	cpuseconds_per_simulated_second
	348	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	349	IF ( dt_restart == 9999999.9 ) THEN
	350	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	351	ELSE
	352	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	353	ENDIF
	354	ENDIF
	355	ENDIF
	356
	357	!
[291]	358	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	359	!-- and ocean are used. In this case, coupling_start_time defines the time
	360	!-- when the coupling is switched on.
	361	IF ( coupling_start_time /= 0.0 ) THEN
	362	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	363	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	364	ELSE
	365	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	366	'precursor runs'
	367	ENDIF
	368	WRITE ( io, 207 ) char1, coupling_start_time
	369	ENDIF
	370
	371	!
[1]	372	!-- Computational grid
[94]	373	IF ( .NOT. ocean ) THEN
	374	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	375	IF ( dz_stretch_level_index < nzt+1 ) THEN
	376	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	377	dz_stretch_factor, dz_max
	378	ENDIF
	379	ELSE
	380	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	381	IF ( dz_stretch_level_index > 0 ) THEN
	382	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	383	dz_stretch_factor, dz_max
	384	ENDIF
[1]	385	ENDIF
	386	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	387	MIN( nnz+2, nzt+2 )
[76]	388	IF ( numprocs > 1 ) THEN
	389	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	390	WRITE ( io, 255 )
	391	ELSE
	392	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	393	ENDIF
[1]	394	ENDIF
	395	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	396
	397	!
	398	!-- Topography
	399	WRITE ( io, 270 ) topography
	400	SELECT CASE ( TRIM( topography ) )
	401
	402	CASE ( 'flat' )
	403	! no actions necessary
	404
	405	CASE ( 'single_building' )
	406	blx = INT( building_length_x / dx )
	407	bly = INT( building_length_y / dy )
	408	bh = INT( building_height / dz )
	409
	410	IF ( building_wall_left == 9999999.9 ) THEN
	411	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	412	ENDIF
	413	bxl = INT ( building_wall_left / dx + 0.5 )
	414	bxr = bxl + blx
	415
	416	IF ( building_wall_south == 9999999.9 ) THEN
	417	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	418	ENDIF
	419	bys = INT ( building_wall_south / dy + 0.5 )
	420	byn = bys + bly
	421
	422	WRITE ( io, 271 ) building_length_x, building_length_y, &
	423	building_height, bxl, bxr, bys, byn
	424
[240]	425	CASE ( 'single_street_canyon' )
	426	ch = NINT( canyon_height / dz )
	427	IF ( canyon_width_x /= 9999999.9 ) THEN
	428	!
	429	!-- Street canyon in y direction
	430	cwx = NINT( canyon_width_x / dx )
	431	IF ( canyon_wall_left == 9999999.9 ) THEN
	432	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	433	ENDIF
	434	cxl = NINT( canyon_wall_left / dx )
	435	cxr = cxl + cwx
	436	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	437
	438	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	439	!
	440	!-- Street canyon in x direction
	441	cwy = NINT( canyon_width_y / dy )
	442	IF ( canyon_wall_south == 9999999.9 ) THEN
	443	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	444	ENDIF
	445	cys = NINT( canyon_wall_south / dy )
	446	cyn = cys + cwy
	447	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	448	ENDIF
	449
[1]	450	END SELECT
	451
[256]	452	IF ( TRIM( topography ) /= 'flat' ) THEN
	453	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	454	IF ( TRIM( topography ) == 'single_building' .OR. &
	455	TRIM( topography ) == 'single_street_canyon' ) THEN
	456	WRITE ( io, 278 )
	457	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	458	WRITE ( io, 279 )
	459	ENDIF
	460	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	461	WRITE ( io, 278 )
	462	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	463	WRITE ( io, 279 )
	464	ENDIF
	465	ENDIF
	466
[138]	467	IF ( plant_canopy ) THEN
	468
	469	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	470	IF ( passive_scalar ) THEN
	471	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	472	leaf_surface_concentration
	473	ENDIF
[138]	474
[1]	475	!
[153]	476	!-- Heat flux at the top of vegetation
	477	WRITE ( io, 282 ) cthf
	478
	479	!
[138]	480	!-- Leaf area density profile
	481	!-- Building output strings, starting with surface value
	482	WRITE ( learde, '(F6.2)' ) lad_surface
	483	gradients = '------'
	484	slices = ' 0'
	485	coordinates = ' 0.0'
	486	i = 1
	487	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	488
	489	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	490	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	491
	492	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	493	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	494
	495	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	496	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	497
	498	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	499	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	500
	501	i = i + 1
	502	ENDDO
	503
[153]	504	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	505	TRIM( gradients ), TRIM( slices )
	506
	507	ENDIF
	508
	509	!
[1]	510	!-- Boundary conditions
	511	IF ( ibc_p_b == 0 ) THEN
	512	runten = 'p(0) = 0 \|'
	513	ELSEIF ( ibc_p_b == 1 ) THEN
	514	runten = 'p(0) = p(1) \|'
	515	ELSE
	516	runten = 'p(0) = p(1) +R\|'
	517	ENDIF
	518	IF ( ibc_p_t == 0 ) THEN
	519	roben = 'p(nzt+1) = 0 \|'
	520	ELSE
	521	roben = 'p(nzt+1) = p(nzt) \|'
	522	ENDIF
	523
	524	IF ( ibc_uv_b == 0 ) THEN
	525	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	526	ELSE
	527	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	528	ENDIF
[132]	529	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	530	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	531	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	532	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	533	ELSE
	534	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	535	ENDIF
	536
	537	IF ( ibc_pt_b == 0 ) THEN
	538	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	539	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	540	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	541	ELSEIF ( ibc_pt_b == 2 ) THEN
	542	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	543	ENDIF
	544	IF ( ibc_pt_t == 0 ) THEN
[19]	545	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	546	ELSEIF( ibc_pt_t == 1 ) THEN
	547	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	548	ELSEIF( ibc_pt_t == 2 ) THEN
	549	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	550	ENDIF
	551
	552	WRITE ( io, 300 ) runten, roben
	553
	554	IF ( .NOT. constant_diffusion ) THEN
	555	IF ( ibc_e_b == 1 ) THEN
	556	runten = 'e(0) = e(1)'
	557	ELSE
	558	runten = 'e(0) = e(1) = (u/0.1)*2'
	559	ENDIF
	560	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	561
[97]	562	WRITE ( io, 301 ) 'e', runten, roben
[1]	563
	564	ENDIF
	565
[97]	566	IF ( ocean ) THEN
	567	runten = 'sa(0) = sa(1)'
	568	IF ( ibc_sa_t == 0 ) THEN
	569	roben = 'sa(nzt+1) = sa_surface'
[1]	570	ELSE
[97]	571	roben = 'sa(nzt+1) = sa(nzt)'
[1]	572	ENDIF
[97]	573	WRITE ( io, 301 ) 'sa', runten, roben
	574	ENDIF
[1]	575
[97]	576	IF ( humidity ) THEN
	577	IF ( ibc_q_b == 0 ) THEN
	578	runten = 'q(0) = q_surface'
	579	ELSE
	580	runten = 'q(0) = q(1)'
	581	ENDIF
	582	IF ( ibc_q_t == 0 ) THEN
	583	roben = 'q(nzt) = q_top'
	584	ELSE
	585	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	586	ENDIF
	587	WRITE ( io, 301 ) 'q', runten, roben
	588	ENDIF
[1]	589
[97]	590	IF ( passive_scalar ) THEN
	591	IF ( ibc_q_b == 0 ) THEN
	592	runten = 's(0) = s_surface'
	593	ELSE
	594	runten = 's(0) = s(1)'
	595	ENDIF
	596	IF ( ibc_q_t == 0 ) THEN
	597	roben = 's(nzt) = s_top'
	598	ELSE
	599	roben = 's(nzt) = s(nzt-1) + ds/dz'
	600	ENDIF
	601	WRITE ( io, 301 ) 's', runten, roben
[1]	602	ENDIF
	603
	604	IF ( use_surface_fluxes ) THEN
	605	WRITE ( io, 303 )
	606	IF ( constant_heatflux ) THEN
	607	WRITE ( io, 306 ) surface_heatflux
	608	IF ( random_heatflux ) WRITE ( io, 307 )
	609	ENDIF
[75]	610	IF ( humidity .AND. constant_waterflux ) THEN
[1]	611	WRITE ( io, 311 ) surface_waterflux
	612	ENDIF
	613	IF ( passive_scalar .AND. constant_waterflux ) THEN
	614	WRITE ( io, 313 ) surface_waterflux
	615	ENDIF
	616	ENDIF
	617
[19]	618	IF ( use_top_fluxes ) THEN
	619	WRITE ( io, 304 )
[102]	620	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	621	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	622	IF ( constant_top_heatflux ) THEN
	623	WRITE ( io, 306 ) top_heatflux
	624	ENDIF
	625	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	626	WRITE ( io, 316 )
[19]	627	ENDIF
[97]	628	IF ( ocean .AND. constant_top_salinityflux ) THEN
	629	WRITE ( io, 309 ) top_salinityflux
	630	ENDIF
[75]	631	IF ( humidity .OR. passive_scalar ) THEN
[19]	632	WRITE ( io, 315 )
	633	ENDIF
	634	ENDIF
	635
[1]	636	IF ( prandtl_layer ) THEN
[94]	637	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	638	rif_min, rif_max
[1]	639	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	640	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	641	WRITE ( io, 312 )
	642	ENDIF
	643	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	644	WRITE ( io, 314 )
	645	ENDIF
	646	ELSE
	647	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	648	WRITE ( io, 310 ) rif_min, rif_max
	649	ENDIF
	650	ENDIF
	651
	652	WRITE ( io, 317 ) bc_lr, bc_ns
	653	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	654	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	655	IF ( turbulent_inflow ) THEN
	656	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	657	inflow_damping_height, inflow_damping_width
	658	ENDIF
[1]	659	ENDIF
	660
	661	!
	662	!-- Listing of 1D-profiles
[151]	663	WRITE ( io, 325 ) dt_dopr_listing
[1]	664	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	665	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	666	ENDIF
	667
	668	!
	669	!-- DATA output
	670	WRITE ( io, 330 )
	671	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	672	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	673	ENDIF
	674
	675	!
	676	!-- 1D-profiles
[254]	677	dopr_chr = 'Pofile:'
[1]	678	IF ( dopr_n /= 0 ) THEN
	679	WRITE ( io, 331 )
	680
	681	output_format = ''
	682	IF ( netcdf_output ) THEN
	683	IF ( netcdf_64bit ) THEN
	684	output_format = 'netcdf (64 bit offset)'
	685	ELSE
	686	output_format = 'netcdf'
	687	ENDIF
	688	ENDIF
	689	IF ( profil_output ) THEN
	690	IF ( netcdf_output ) THEN
	691	output_format = TRIM( output_format ) // ' and profil'
	692	ELSE
	693	output_format = 'profil'
	694	ENDIF
	695	ENDIF
[292]	696	WRITE ( io, 344 ) output_format
[1]	697
	698	DO i = 1, dopr_n
	699	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	700	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	701	WRITE ( io, 332 ) dopr_chr
	702	dopr_chr = ' :'
	703	ENDIF
	704	ENDDO
	705
	706	IF ( dopr_chr /= '' ) THEN
	707	WRITE ( io, 332 ) dopr_chr
	708	ENDIF
	709	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	710	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	711	ENDIF
	712
	713	!
	714	!-- 2D-arrays
	715	DO av = 0, 1
	716
	717	i = 1
	718	do2d_xy = ''
	719	do2d_xz = ''
	720	do2d_yz = ''
	721	DO WHILE ( do2d(av,i) /= ' ' )
	722
	723	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	724	do2d_mode = do2d(av,i)(l-1:l)
	725
	726	SELECT CASE ( do2d_mode )
	727	CASE ( 'xy' )
	728	ll = LEN_TRIM( do2d_xy )
	729	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	730	CASE ( 'xz' )
	731	ll = LEN_TRIM( do2d_xz )
	732	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	733	CASE ( 'yz' )
	734	ll = LEN_TRIM( do2d_yz )
	735	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	736	END SELECT
	737
	738	i = i + 1
	739
	740	ENDDO
	741
	742	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	743	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	744	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	745	( netcdf_output .OR. iso2d_output ) ) THEN
	746
	747	IF ( av == 0 ) THEN
	748	WRITE ( io, 334 ) ''
	749	ELSE
	750	WRITE ( io, 334 ) '(time-averaged)'
	751	ENDIF
	752
	753	IF ( do2d_at_begin ) THEN
	754	begin_chr = 'and at the start'
	755	ELSE
	756	begin_chr = ''
	757	ENDIF
	758
	759	output_format = ''
	760	IF ( netcdf_output ) THEN
	761	IF ( netcdf_64bit ) THEN
	762	output_format = 'netcdf (64 bit offset)'
	763	ELSE
	764	output_format = 'netcdf'
	765	ENDIF
	766	ENDIF
	767	IF ( iso2d_output ) THEN
	768	IF ( netcdf_output ) THEN
	769	output_format = TRIM( output_format ) // ' and iso2d'
	770	ELSE
	771	output_format = 'iso2d'
	772	ENDIF
	773	ENDIF
[292]	774	WRITE ( io, 344 ) output_format
[1]	775
	776	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	777	i = 1
	778	slices = '/'
	779	coordinates = '/'
	780	!
	781	!-- Building strings with index and coordinate informations of the
	782	!-- slices
	783	DO WHILE ( section(i,1) /= -9999 )
	784
	785	WRITE (section_chr,'(I5)') section(i,1)
	786	section_chr = ADJUSTL( section_chr )
	787	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	788
[206]	789	IF ( section(i,1) == -1 ) THEN
	790	WRITE (coor_chr,'(F10.1)') -1.0
	791	ELSE
	792	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	793	ENDIF
[1]	794	coor_chr = ADJUSTL( coor_chr )
	795	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	796
	797	i = i + 1
	798	ENDDO
	799	IF ( av == 0 ) THEN
	800	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	801	TRIM( begin_chr ), 'k', TRIM( slices ), &
	802	TRIM( coordinates )
	803	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	804	WRITE ( io, 339 ) skip_time_do2d_xy
	805	ENDIF
	806	ELSE
	807	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	808	TRIM( begin_chr ), averaging_interval, &
	809	dt_averaging_input, 'k', TRIM( slices ), &
	810	TRIM( coordinates )
	811	IF ( skip_time_data_output_av /= 0.0 ) THEN
	812	WRITE ( io, 339 ) skip_time_data_output_av
	813	ENDIF
	814	ENDIF
	815
	816	ENDIF
	817
	818	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	819	i = 1
	820	slices = '/'
	821	coordinates = '/'
	822	!
	823	!-- Building strings with index and coordinate informations of the
	824	!-- slices
	825	DO WHILE ( section(i,2) /= -9999 )
	826
	827	WRITE (section_chr,'(I5)') section(i,2)
	828	section_chr = ADJUSTL( section_chr )
	829	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	830
	831	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	832	coor_chr = ADJUSTL( coor_chr )
	833	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	834
	835	i = i + 1
	836	ENDDO
	837	IF ( av == 0 ) THEN
	838	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	839	TRIM( begin_chr ), 'j', TRIM( slices ), &
	840	TRIM( coordinates )
	841	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	842	WRITE ( io, 339 ) skip_time_do2d_xz
	843	ENDIF
	844	ELSE
	845	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	846	TRIM( begin_chr ), averaging_interval, &
	847	dt_averaging_input, 'j', TRIM( slices ), &
	848	TRIM( coordinates )
	849	IF ( skip_time_data_output_av /= 0.0 ) THEN
	850	WRITE ( io, 339 ) skip_time_data_output_av
	851	ENDIF
	852	ENDIF
	853	ENDIF
	854
	855	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	856	i = 1
	857	slices = '/'
	858	coordinates = '/'
	859	!
	860	!-- Building strings with index and coordinate informations of the
	861	!-- slices
	862	DO WHILE ( section(i,3) /= -9999 )
	863
	864	WRITE (section_chr,'(I5)') section(i,3)
	865	section_chr = ADJUSTL( section_chr )
	866	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	867
	868	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	869	coor_chr = ADJUSTL( coor_chr )
	870	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	871
	872	i = i + 1
	873	ENDDO
	874	IF ( av == 0 ) THEN
	875	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	876	TRIM( begin_chr ), 'i', TRIM( slices ), &
	877	TRIM( coordinates )
	878	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	879	WRITE ( io, 339 ) skip_time_do2d_yz
	880	ENDIF
	881	ELSE
	882	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	883	TRIM( begin_chr ), averaging_interval, &
	884	dt_averaging_input, 'i', TRIM( slices ), &
	885	TRIM( coordinates )
	886	IF ( skip_time_data_output_av /= 0.0 ) THEN
	887	WRITE ( io, 339 ) skip_time_data_output_av
	888	ENDIF
	889	ENDIF
	890	ENDIF
	891
	892	ENDIF
	893
	894	ENDDO
	895
	896	!
	897	!-- 3d-arrays
	898	DO av = 0, 1
	899
	900	i = 1
	901	do3d_chr = ''
	902	DO WHILE ( do3d(av,i) /= ' ' )
	903
	904	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	905	i = i + 1
	906
	907	ENDDO
	908
	909	IF ( do3d_chr /= '' ) THEN
	910	IF ( av == 0 ) THEN
	911	WRITE ( io, 336 ) ''
	912	ELSE
	913	WRITE ( io, 336 ) '(time-averaged)'
	914	ENDIF
	915
	916	output_format = ''
	917	IF ( netcdf_output ) THEN
[292]	918	IF ( netcdf_64bit_3d ) THEN
[1]	919	output_format = 'netcdf (64 bit offset)'
	920	ELSE
	921	output_format = 'netcdf'
	922	ENDIF
	923	ENDIF
	924	IF ( avs_output ) THEN
	925	IF ( netcdf_output ) THEN
	926	output_format = TRIM( output_format ) // ' and avs'
	927	ELSE
	928	output_format = 'avs'
	929	ENDIF
	930	ENDIF
[292]	931	WRITE ( io, 344 ) output_format
[1]	932
	933	IF ( do3d_at_begin ) THEN
	934	begin_chr = 'and at the start'
	935	ELSE
	936	begin_chr = ''
	937	ENDIF
	938	IF ( av == 0 ) THEN
	939	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	940	zu(nz_do3d), nz_do3d
	941	ELSE
	942	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	943	TRIM( begin_chr ), averaging_interval, &
	944	dt_averaging_input, zu(nz_do3d), nz_do3d
	945	ENDIF
	946
	947	IF ( do3d_compress ) THEN
	948	do3d_chr = ''
	949	i = 1
	950	DO WHILE ( do3d(av,i) /= ' ' )
	951
	952	SELECT CASE ( do3d(av,i) )
	953	CASE ( 'u' )
	954	j = 1
	955	CASE ( 'v' )
	956	j = 2
	957	CASE ( 'w' )
	958	j = 3
	959	CASE ( 'p' )
	960	j = 4
	961	CASE ( 'pt' )
	962	j = 5
	963	END SELECT
	964	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	965	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	966	':' // prec // ','
	967	i = i + 1
	968
	969	ENDDO
	970	WRITE ( io, 338 ) do3d_chr
	971
	972	ENDIF
	973
	974	IF ( av == 0 ) THEN
	975	IF ( skip_time_do3d /= 0.0 ) THEN
	976	WRITE ( io, 339 ) skip_time_do3d
	977	ENDIF
	978	ELSE
	979	IF ( skip_time_data_output_av /= 0.0 ) THEN
	980	WRITE ( io, 339 ) skip_time_data_output_av
	981	ENDIF
	982	ENDIF
	983
	984	ENDIF
	985
	986	ENDDO
	987
	988	!
	989	!-- Timeseries
	990	IF ( dt_dots /= 9999999.9 ) THEN
	991	WRITE ( io, 340 )
	992
	993	output_format = ''
	994	IF ( netcdf_output ) THEN
	995	IF ( netcdf_64bit ) THEN
	996	output_format = 'netcdf (64 bit offset)'
	997	ELSE
	998	output_format = 'netcdf'
	999	ENDIF
	1000	ENDIF
	1001	IF ( profil_output ) THEN
	1002	IF ( netcdf_output ) THEN
	1003	output_format = TRIM( output_format ) // ' and profil'
	1004	ELSE
	1005	output_format = 'profil'
	1006	ENDIF
	1007	ENDIF
[292]	1008	WRITE ( io, 344 ) output_format
[1]	1009	WRITE ( io, 341 ) dt_dots
	1010	ENDIF
	1011
	1012	#if defined( __dvrp_graphics )
	1013	!
	1014	!-- Dvrp-output
	1015	IF ( dt_dvrp /= 9999999.9 ) THEN
	1016	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1017	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1018	i = 1
	1019	l = 0
	1020	DO WHILE ( mode_dvrp(i) /= ' ' )
	1021	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1022	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1023	l = l + 1
	1024	IF ( do3d(0,j) /= ' ' ) THEN
	1025	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	1026	ENDIF
	1027	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1028	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	1029	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	1030	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	1031	WRITE ( io, 363 )
	1032	ENDIF
	1033	i = i + 1
	1034	ENDDO
[237]	1035
	1036	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
	1037	WRITE ( io, 364 ) cluster_size
	1038	ENDIF
	1039
[1]	1040	ENDIF
	1041	#endif
	1042
	1043	#if defined( __spectra )
	1044	!
	1045	!-- Spectra output
	1046	IF ( dt_dosp /= 9999999.9 ) THEN
	1047	WRITE ( io, 370 )
	1048
	1049	output_format = ''
	1050	IF ( netcdf_output ) THEN
	1051	IF ( netcdf_64bit ) THEN
	1052	output_format = 'netcdf (64 bit offset)'
	1053	ELSE
	1054	output_format = 'netcdf'
	1055	ENDIF
	1056	ENDIF
	1057	IF ( profil_output ) THEN
	1058	IF ( netcdf_output ) THEN
	1059	output_format = TRIM( output_format ) // ' and profil'
	1060	ELSE
	1061	output_format = 'profil'
	1062	ENDIF
	1063	ENDIF
[292]	1064	WRITE ( io, 344 ) output_format
[1]	1065	WRITE ( io, 371 ) dt_dosp
	1066	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1067	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1068	( spectra_direction(i), i = 1,10 ), &
[189]	1069	( comp_spectra_level(i), i = 1,100 ), &
	1070	( plot_spectra_level(i), i = 1,100 ), &
[1]	1071	averaging_interval_sp, dt_averaging_input_pr
	1072	ENDIF
	1073	#endif
	1074
	1075	WRITE ( io, 99 )
	1076
	1077	!
	1078	!-- Physical quantities
	1079	WRITE ( io, 400 )
	1080
	1081	!
	1082	!-- Geostrophic parameters
	1083	WRITE ( io, 410 ) omega, phi, f, fs
	1084
	1085	!
	1086	!-- Other quantities
	1087	WRITE ( io, 411 ) g
[97]	1088	IF ( use_reference ) THEN
	1089	IF ( ocean ) THEN
	1090	WRITE ( io, 412 ) prho_reference
	1091	ELSE
	1092	WRITE ( io, 413 ) pt_reference
	1093	ENDIF
	1094	ENDIF
[1]	1095
	1096	!
	1097	!-- Cloud physics parameters
	1098	IF ( cloud_physics ) THEN
[57]	1099	WRITE ( io, 415 )
	1100	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1101	ENDIF
	1102
	1103	!-- Profile of the geostrophic wind (component ug)
	1104	!-- Building output strings
	1105	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1106	gradients = '------'
	1107	slices = ' 0'
	1108	coordinates = ' 0.0'
	1109	i = 1
	1110	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1111
[167]	1112	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1113	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1114
[167]	1115	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1116	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1117
[167]	1118	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1119	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1120
[167]	1121	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1122	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1123
	1124	i = i + 1
	1125	ENDDO
	1126
	1127	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1128	TRIM( gradients ), TRIM( slices )
	1129
	1130	!-- Profile of the geostrophic wind (component vg)
	1131	!-- Building output strings
	1132	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1133	gradients = '------'
	1134	slices = ' 0'
	1135	coordinates = ' 0.0'
	1136	i = 1
	1137	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1138
[167]	1139	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1140	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1141
[167]	1142	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1143	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1144
[167]	1145	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1146	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1147
[167]	1148	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1149	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1150
	1151	i = i + 1
	1152	ENDDO
	1153
	1154	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1155	TRIM( gradients ), TRIM( slices )
	1156
	1157	!
	1158	!-- Initial temperature profile
	1159	!-- Building output strings, starting with surface temperature
	1160	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1161	gradients = '------'
	1162	slices = ' 0'
	1163	coordinates = ' 0.0'
	1164	i = 1
	1165	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1166
[94]	1167	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1168	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1169
[94]	1170	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1171	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1172
[94]	1173	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1174	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1175
[94]	1176	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1177	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1178
	1179	i = i + 1
	1180	ENDDO
	1181
	1182	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1183	TRIM( gradients ), TRIM( slices )
	1184
	1185	!
	1186	!-- Initial humidity profile
	1187	!-- Building output strings, starting with surface humidity
[75]	1188	IF ( humidity .OR. passive_scalar ) THEN
[1]	1189	WRITE ( temperatures, '(E8.1)' ) q_surface
	1190	gradients = '--------'
	1191	slices = ' 0'
	1192	coordinates = ' 0.0'
	1193	i = 1
	1194	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1195
	1196	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1197	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1198
	1199	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1200	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1201
	1202	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1203	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1204
	1205	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1206	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1207
	1208	i = i + 1
	1209	ENDDO
	1210
[75]	1211	IF ( humidity ) THEN
[1]	1212	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1213	TRIM( gradients ), TRIM( slices )
	1214	ELSE
	1215	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1216	TRIM( gradients ), TRIM( slices )
	1217	ENDIF
	1218	ENDIF
	1219
	1220	!
[97]	1221	!-- Initial salinity profile
	1222	!-- Building output strings, starting with surface salinity
	1223	IF ( ocean ) THEN
	1224	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1225	gradients = '------'
	1226	slices = ' 0'
	1227	coordinates = ' 0.0'
	1228	i = 1
	1229	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1230
	1231	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1232	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1233
	1234	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1235	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1236
	1237	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1238	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1239
	1240	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1241	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1242
	1243	i = i + 1
	1244	ENDDO
	1245
	1246	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1247	TRIM( gradients ), TRIM( slices )
	1248	ENDIF
	1249
	1250	!
[1]	1251	!-- LES / turbulence parameters
	1252	WRITE ( io, 450 )
	1253
	1254	!--
	1255	! ... LES-constants used must still be added here
	1256	!--
	1257	IF ( constant_diffusion ) THEN
	1258	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1259	prandtl_number
	1260	ENDIF
	1261	IF ( .NOT. constant_diffusion) THEN
[108]	1262	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1263	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1264	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1265	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1266	ENDIF
	1267
	1268	!
	1269	!-- Special actions during the run
	1270	WRITE ( io, 470 )
	1271	IF ( create_disturbances ) THEN
	1272	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1273	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1274	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1275	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1276	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1277	ELSE
	1278	WRITE ( io, 473 ) disturbance_energy_limit
	1279	ENDIF
	1280	WRITE ( io, 474 ) TRIM( random_generator )
	1281	ENDIF
	1282	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1283	WRITE ( io, 475 ) pt_surface_initial_change
	1284	ENDIF
[75]	1285	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1286	WRITE ( io, 476 ) q_surface_initial_change
	1287	ENDIF
	1288	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1289	WRITE ( io, 477 ) q_surface_initial_change
	1290	ENDIF
	1291
[60]	1292	IF ( particle_advection ) THEN
[1]	1293	!
[60]	1294	!-- Particle attributes
	1295	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1296	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1297	end_time_prel, dt_sort_particles
[60]	1298	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1299	IF ( random_start_position ) WRITE ( io, 481 )
	1300	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1301	WRITE ( io, 495 ) total_number_of_particles
	1302	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1303	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1304	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1305	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1306	WRITE ( io, 484 ) total_number_of_tails, &
	1307	minimum_tailpoint_distance, &
	1308	maximum_tailpoint_age
	1309	ENDIF
[1]	1310	ENDIF
[60]	1311	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1312	WRITE ( io, 485 ) dt_write_particle_data
	1313	output_format = ''
	1314	IF ( netcdf_output ) THEN
	1315	IF ( netcdf_64bit ) THEN
	1316	output_format = 'netcdf (64 bit offset) and binary'
	1317	ELSE
	1318	output_format = 'netcdf and binary'
	1319	ENDIF
[1]	1320	ELSE
[60]	1321	output_format = 'binary'
[1]	1322	ENDIF
[292]	1323	WRITE ( io, 344 ) output_format
[1]	1324	ENDIF
[60]	1325	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1326	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1327
[60]	1328	WRITE ( io, 487 ) number_of_particle_groups
[1]	1329
[60]	1330	DO i = 1, number_of_particle_groups
	1331	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1332	WRITE ( io, 490 ) i, 0.0
	1333	WRITE ( io, 492 )
[1]	1334	ELSE
[60]	1335	WRITE ( io, 490 ) i, radius(i)
	1336	IF ( density_ratio(i) /= 0.0 ) THEN
	1337	WRITE ( io, 491 ) density_ratio(i)
	1338	ELSE
	1339	WRITE ( io, 492 )
	1340	ENDIF
[1]	1341	ENDIF
[60]	1342	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1343	pdx(i), pdy(i), pdz(i)
	1344	ENDDO
[1]	1345
[60]	1346	ENDIF
[1]	1347
[60]	1348
[1]	1349	!
	1350	!-- Parameters of 1D-model
	1351	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1352	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1353	mixing_length_1d, dissipation_1d
	1354	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1355	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1356	ENDIF
	1357	ENDIF
	1358
	1359	!
	1360	!-- User-defined informations
	1361	CALL user_header( io )
	1362
	1363	WRITE ( io, 99 )
	1364
	1365	!
	1366	!-- Write buffer contents to disc immediately
[82]	1367	CALL local_flush( io )
[1]	1368
	1369	!
	1370	!-- Here the FORMATs start
	1371
	1372	99 FORMAT (1X,78('-'))
[200]	1373	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1374	1X,'* ',A,' *',9X,A/ &
	1375	1X,'***************************',9X,42('-'))
[291]	1376	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1377	37X,42('-'))
[200]	1378	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1379	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1380	' Run on host: ',A10)
[1]	1381	#if defined( __parallel )
[200]	1382	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1383	')',1X,A)
[200]	1384	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1385	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1386	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1387	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1388	37X,'because the job is running on an SMP-cluster')
[102]	1389	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1390	#endif
	1391	110 FORMAT (/' Numerical Schemes:'/ &
	1392	' -----------------'/)
	1393	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1394	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1395	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1396	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1397	' or Upstream')
	1398	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1399	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1400	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1401	' or Upstream')
	1402	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1403	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1404	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1405	' Translation velocity = ',A/ &
	1406	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1407	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1408	' of timestep changes)')
	1409	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1410	' timestep changes')
	1411	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1412	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1413	' maximum damping coefficient: ',F5.3, ' 1/s')
	1414	124 FORMAT (' Spline-overshoots are being suppressed')
	1415	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1416	' of'/ &
	1417	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1418	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1419	' of'/ &
	1420	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1421	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1422	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1423	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1424	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1425	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1426	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1427	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1428	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1429	' effective emissivity scheme')
	1430	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1431	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1432	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1433	A,'-cycle)'/ &
	1434	' number of grid levels: ',I2/ &
	1435	' Gauss-Seidel red/black iterations: ',I2)
	1436	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1437	I3,')')
	1438	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1439	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1440	I3,')'/ &
	1441	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1442	I3,')')
	1443	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1444	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1445	140 FORMAT (' maximum residual allowed: ',E10.3)
	1446	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1447	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1448	'step')
[87]	1449	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1450	'kinetic energy')
[1]	1451	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1452	'conserved'/ &
	1453	' using the ',A,' mode')
	1454	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1455	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1456	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1457	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1458	200 FORMAT (//' Run time and time step information:'/ &
	1459	' ----------------------------------'/)
	1460	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1461	' CFL-factor: ',F4.2)
	1462	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1463	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1464	' End time: ',F9.3,' s')
	1465	204 FORMAT ( A,F9.3,' s')
	1466	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1467	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1468	' CPU-time used: ',F9.3,' s per timestep: ', &
	1469	' ',F9.3,' s'/ &
	1470	' per second of simulated tim', &
	1471	'e: ',F9.3,' s')
[291]	1472	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1473	250 FORMAT (//' Computational grid and domain size:'/ &
	1474	' ----------------------------------'// &
	1475	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1476	' m dz = ',F7.3,' m'/ &
	1477	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1478	' m z(u) = ',F10.3,' m'/)
	1479	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1480	' factor: ',F5.3/ &
	1481	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1482	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1483	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1484	255 FORMAT (' Subdomains have equal size')
	1485	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1486	'have smaller sizes'/ &
	1487	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1488	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1489	' degrees')
	1490	270 FORMAT (//' Topography informations:'/ &
	1491	' -----------------------'// &
	1492	1X,'Topography: ',A)
	1493	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1494	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1495	' / ',I4)
[240]	1496	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1497	' direction' / &
	1498	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1499	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1500	278 FORMAT (' Topography grid definition convention:'/ &
	1501	' cell edge (staggered grid points'/ &
	1502	' (u in x-direction, v in y-direction))' /)
	1503	279 FORMAT (' Topography grid definition convention:'/ &
	1504	' cell center (scalar grid points)' /)
[138]	1505	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1506	' ------------------------------'// &
	1507	' Canopy mode: ', A / &
	1508	' Canopy top: ',I4 / &
	1509	' Leaf drag coefficient: ',F6.2 /)
[153]	1510	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1511	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1512	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1513	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1514	' Height: ',A,' m'/ &
	1515	' Leaf area density: ',A,' m2/m3'/ &
	1516	' Gradient: ',A,' m2/m4'/ &
	1517	' Gridpoint: ',A)
	1518
[1]	1519	300 FORMAT (//' Boundary conditions:'/ &
	1520	' -------------------'// &
	1521	' p uv ', &
	1522	' pt'// &
	1523	' B. bound.: ',A/ &
	1524	' T. bound.: ',A)
[97]	1525	301 FORMAT (/' ',A// &
[1]	1526	' B. bound.: ',A/ &
	1527	' T. bound.: ',A)
[19]	1528	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1529	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1530	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1531	'computational u,v-level:'// &
[1]	1532	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1533	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1534	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1535	307 FORMAT (' Heatflux has a random normal distribution')
	1536	308 FORMAT (' Predefined surface temperature')
[97]	1537	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1538	310 FORMAT (//' 1D-Model:'// &
	1539	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1540	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1541	312 FORMAT (' Predefined surface humidity')
	1542	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1543	314 FORMAT (' Predefined scalar value at the surface')
[19]	1544	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1545	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1546	'atmosphere model')
[1]	1547	317 FORMAT (//' Lateral boundaries:'/ &
	1548	' left/right: ',A/ &
	1549	' north/south: ',A)
	1550	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1551	'max =',F5.1,' m**2/s')
[151]	1552	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1553	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1554	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1555	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1556	' v: ',F9.6,' m2/s2')
[151]	1557	325 FORMAT (//' List output:'/ &
[1]	1558	' -----------'// &
	1559	' 1D-Profiles:'/ &
	1560	' Output every ',F8.2,' s')
[151]	1561	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1562	' Averaging input every ',F8.2,' s')
	1563	330 FORMAT (//' Data output:'/ &
	1564	' -----------'/)
	1565	331 FORMAT (/' 1D-Profiles:')
	1566	332 FORMAT (/' ',A)
	1567	333 FORMAT (' Output every ',F8.2,' s',/ &
	1568	' Time averaged over ',F8.2,' s'/ &
	1569	' Averaging input every ',F8.2,' s')
	1570	334 FORMAT (/' 2D-Arrays',A,':')
	1571	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1572	' Output every ',F8.2,' s ',A/ &
	1573	' Cross sections at ',A1,' = ',A/ &
	1574	' scalar-coordinates: ',A,' m'/)
	1575	336 FORMAT (/' 3D-Arrays',A,':')
	1576	337 FORMAT (/' Arrays: ',A/ &
	1577	' Output every ',F8.2,' s ',A/ &
	1578	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1579	338 FORMAT (' Compressed data output'/ &
	1580	' Decimal precision: ',A/)
	1581	339 FORMAT (' No output during initial ',F8.2,' s')
	1582	340 FORMAT (/' Time series:')
	1583	341 FORMAT (' Output every ',F8.2,' s'/)
	1584	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1585	' Output every ',F8.2,' s ',A/ &
	1586	' Time averaged over ',F8.2,' s'/ &
	1587	' Averaging input every ',F8.2,' s'/ &
	1588	' Cross sections at ',A1,' = ',A/ &
	1589	' scalar-coordinates: ',A,' m'/)
	1590	343 FORMAT (/' Arrays: ',A/ &
	1591	' Output every ',F8.2,' s ',A/ &
	1592	' Time averaged over ',F8.2,' s'/ &
	1593	' Averaging input every ',F8.2,' s'/ &
	1594	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1595	344 FORMAT (' Output format: ',A/)
[1]	1596	#if defined( __dvrp_graphics )
	1597	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1598	' Output every ',F7.1,' s'/ &
	1599	' Output mode: ',A/ &
	1600	' Host / User: ',A,' / ',A/ &
	1601	' Directory: ',A// &
	1602	' The sequence contains:')
	1603	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1604	362 FORMAT (' Sectional plane ',A)
	1605	363 FORMAT (' Particles')
[237]	1606	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
[1]	1607	#endif
	1608	#if defined( __spectra )
	1609	370 FORMAT (' Spectra:')
	1610	371 FORMAT (' Output every ',F7.1,' s'/)
	1611	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1612	' Directions: ', 10(A5,',')/ &
[189]	1613	' height levels k = ', 20(I3,',')/ &
	1614	' ', 20(I3,',')/ &
	1615	' ', 20(I3,',')/ &
	1616	' ', 20(I3,',')/ &
	1617	' ', 19(I3,','),I3,'.'/ &
[1]	1618	' height levels selected for standard plot:'/ &
[189]	1619	' k = ', 20(I3,',')/ &
	1620	' ', 20(I3,',')/ &
	1621	' ', 20(I3,',')/ &
	1622	' ', 20(I3,',')/ &
	1623	' ', 19(I3,','),I3,'.'/ &
[1]	1624	' Time averaged over ', F7.1, ' s,' / &
	1625	' Profiles for the time averaging are taken every ', &
	1626	F6.1,' s')
	1627	#endif
	1628	400 FORMAT (//' Physical quantities:'/ &
	1629	' -------------------'/)
	1630	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1631	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1632	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1633	' f* = ',F9.6,' 1/s')
	1634	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1635	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1636	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1637	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1638	' ------------------------'/)
[57]	1639	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1640	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1641	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1642	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1643	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1644	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1645	' Height: ',A,' m'/ &
	1646	' Temperature: ',A,' K'/ &
	1647	' Gradient: ',A,' K/100m'/ &
	1648	' Gridpoint: ',A)
	1649	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1650	' Height: ',A,' m'/ &
	1651	' Humidity: ',A,' kg/kg'/ &
	1652	' Gradient: ',A,' (kg/kg)/100m'/ &
	1653	' Gridpoint: ',A)
	1654	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1655	' Height: ',A,' m'/ &
	1656	' Scalar concentration: ',A,' kg/m**3'/ &
	1657	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1658	' Gridpoint: ',A)
	1659	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1660	' Height: ',A,' m'/ &
	1661	' ug: ',A,' m/s'/ &
	1662	' Gradient: ',A,' 1/100s'/ &
	1663	' Gridpoint: ',A)
	1664	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1665	' Height: ',A,' m'/ &
[97]	1666	' vg: ',A,' m/s'/ &
[1]	1667	' Gradient: ',A,' 1/100s'/ &
	1668	' Gridpoint: ',A)
[97]	1669	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1670	' Height: ',A,' m'/ &
	1671	' Salinity: ',A,' psu'/ &
	1672	' Gradient: ',A,' psu/100m'/ &
	1673	' Gridpoint: ',A)
[1]	1674	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1675	' ---------------------------'/)
	1676	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1677	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1678	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1679	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1680	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1681	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1682	470 FORMAT (//' Actions during the simulation:'/ &
	1683	' -----------------------------'/)
[94]	1684	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1685	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1686	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1687	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1688	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1689	' to i/j =',I4)
	1690	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1691	1X,F5.3, ' m2/s2')
	1692	474 FORMAT (' Random number generator used : ',A/)
	1693	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1694	'respectively, if'/ &
	1695	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1696	' 3D-simulation'/)
	1697	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1698	'respectively, if the'/ &
	1699	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1700	' the 3D-simulation'/)
	1701	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1702	'respectively, if the'/ &
	1703	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1704	' the 3D-simulation'/)
	1705	480 FORMAT (' Particles:'/ &
	1706	' ---------'// &
	1707	' Particle advection is active (switched on at t = ', F7.1, &
	1708	' s)'/ &
	1709	' Start of new particle generations every ',F6.1,' s'/ &
	1710	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1711	' bottom: ', A, ' top: ', A/&
	1712	' Maximum particle age: ',F9.1,' s'/ &
[117]	1713	' Advection stopped at t = ',F9.1,' s'/ &
	1714	' Particles are sorted every ',F9.1,' s'/)
[1]	1715	481 FORMAT (' Particles have random start positions'/)
	1716	482 FORMAT (' Particles are advected only horizontally'/)
	1717	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1718	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1719	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1720	' Maximum age of the end of the tail: ',F8.2,' s')
	1721	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1722	486 FORMAT (' Particle statistics are written on file'/)
	1723	487 FORMAT (' Number of particle groups: ',I2/)
	1724	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1725	' minimum timestep for advection: ', F7.5/)
	1726	489 FORMAT (' Number of particles simultaneously released at each ', &
	1727	'point: ', I5/)
	1728	490 FORMAT (' Particle group ',I2,':'/ &
	1729	' Particle radius: ',E10.3, 'm')
	1730	491 FORMAT (' Particle inertia is activated'/ &
	1731	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1732	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1733	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1734	' y:',F8.1,' - ',F8.1,' m'/&
	1735	' z:',F8.1,' - ',F8.1,' m'/&
	1736	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1737	' m dz = ',F8.1,' m'/)
	1738	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1739	F8.2,' s'/)
	1740	495 FORMAT (' Number of particles in total domain: ',I10/)
	1741	500 FORMAT (//' 1D-Model parameters:'/ &
	1742	' -------------------'// &
	1743	' Simulation time: ',F8.1,' s'/ &
	1744	' Run-controll output every: ',F8.1,' s'/ &
	1745	' Vertical profile output every: ',F8.1,' s'/ &
	1746	' Mixing length calculation: ',A/ &
	1747	' Dissipation calculation: ',A/)
	1748	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1749
	1750
	1751	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |