Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 277

Last change on this file since 277 was 256, checked in by letzel, 16 years ago
topography_grid_convention moved from userpar to inipar documentation and examples updated
Property svn:keywords set to `Id`
File size: 66.6 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[254]	6	! Output of messages replaced by message handling routine.
[237]	7	! Output of cluster_size
[240]	8	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	9	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	10	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	11	! topography_grid_convention moved from user_header
[1]	12	!
	13	! Former revisions:
	14	! -----------------
[3]	15	! $Id: header.f90 256 2009-03-08 08:56:27Z heinze $
[39]	16	!
[226]	17	! 206 2008-10-13 14:59:11Z raasch
	18	! Bugfix: error in zu index in case of section_xy = -1
	19	!
[200]	20	! 198 2008-09-17 08:55:28Z raasch
	21	! Format adjustments allowing output of larger revision numbers
	22	!
[198]	23	! 197 2008-09-16 15:29:03Z raasch
	24	! allow 100 spectra levels instead of 10 for consistency with
	25	! define_netcdf_header,
	26	! bugfix in the output of the characteristic levels of potential temperature,
	27	! geostrophic wind, scalar concentration, humidity and leaf area density,
	28	! output of turbulence recycling informations
	29	!
[139]	30	! 138 2007-11-28 10:03:58Z letzel
	31	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	32	! Allow two instead of one digit to specify isosurface and slicer variables.
	33	! Output of sorting frequency of particles
	34	!
[110]	35	! 108 2007-08-24 15:10:38Z letzel
	36	! Output of informations for coupled model runs (boundary conditions etc.)
	37	! + output of momentumfluxes at the top boundary
	38	! Rayleigh damping for ocean, e_init
	39	!
[98]	40	! 97 2007-06-21 08:23:15Z raasch
	41	! Adjustments for the ocean version.
	42	! use_pt_reference renamed use_reference
	43	!
[90]	44	! 87 2007-05-22 15:46:47Z raasch
	45	! Bugfix: output of use_upstream_for_tke
	46	!
[83]	47	! 82 2007-04-16 15:40:52Z raasch
	48	! Preprocessor strings for different linux clusters changed to "lc",
	49	! routine local_flush is used for buffer flushing
	50	!
[77]	51	! 76 2007-03-29 00:58:32Z raasch
	52	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	53	! output of the loop optimization method, moisture renamed humidity,
	54	! output of subversion revision number
	55	!
[39]	56	! 19 2007-02-23 04:53:48Z raasch
	57	! Output of scalar flux applied at top boundary
	58	!
[3]	59	! RCS Log replace by Id keyword, revision history cleaned up
	60	!
[1]	61	! Revision 1.63 2006/08/22 13:53:13 raasch
	62	! Output of dz_max
	63	!
	64	! Revision 1.1 1997/08/11 06:17:20 raasch
	65	! Initial revision
	66	!
	67	!
	68	! Description:
	69	! ------------
	70	! Writing a header with all important informations about the actual run.
	71	! This subroutine is called three times, two times at the beginning
	72	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	73	! end of the run, then writing additional information about CPU-usage on file
	74	! header.
	75	!------------------------------------------------------------------------------!
	76
	77	USE arrays_3d
	78	USE control_parameters
	79	USE cloud_parameters
	80	USE cpulog
	81	USE dvrp_variables
	82	USE grid_variables
	83	USE indices
	84	USE model_1d
	85	USE particle_attributes
	86	USE pegrid
	87	USE spectrum
	88
	89	IMPLICIT NONE
	90
	91	CHARACTER (LEN=1) :: prec
	92	CHARACTER (LEN=2) :: do2d_mode
	93	CHARACTER (LEN=5) :: section_chr
	94	CHARACTER (LEN=9) :: time_to_string
	95	CHARACTER (LEN=10) :: coor_chr, host_chr
	96	CHARACTER (LEN=16) :: begin_chr
[200]	97	CHARACTER (LEN=23) :: ver_rev
[1]	98	CHARACTER (LEN=40) :: output_format
[167]	99	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	100	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	101	run_classification
	102	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	103	temperatures, ugcomponent, vgcomponent
[1]	104	CHARACTER (LEN=85) :: roben, runten
	105
[240]	106	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
	107	cyn, cys, i, ihost, io, j, l, ll
[1]	108	REAL :: cpuseconds_per_simulated_second
	109
	110	!
	111	!-- Open the output file. At the end of the simulation, output is directed
	112	!-- to unit 19.
	113	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	114	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	115	io = 15 ! header output on file RUN_CONTROL
	116	ELSE
	117	io = 19 ! header output on file HEADER
	118	ENDIF
	119	CALL check_open( io )
	120
	121	!
	122	!-- At the end of the run, output file (HEADER) will be rewritten with
	123	!-- new informations
	124	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	125
	126	!
	127	!-- Determine kind of model run
	128	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	129	run_classification = '3D - restart run'
[147]	130	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	131	run_classification = '3D - run using 3D - prerun data'
	132	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	133	run_classification = '3D - run without 1D - prerun'
[197]	134	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	135	run_classification = '3D - run with 1D - prerun'
[197]	136	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	137	run_classification = '3D - run initialized by user'
[1]	138	ELSE
[254]	139	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	140	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	141	ENDIF
[97]	142	IF ( ocean ) THEN
	143	run_classification = 'ocean - ' // run_classification
	144	ELSE
	145	run_classification = 'atmosphere - ' // run_classification
	146	ENDIF
[1]	147
	148	!
	149	!-- Run-identification, date, time, host
	150	host_chr = host(1:10)
[75]	151	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	152	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	153	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	154	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	155	ADJUSTR( host_chr )
[1]	156	#if defined( __parallel )
	157	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	158	char1 = 'calculated'
	159	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	160	host(1:2) == 'lc' ) .AND. &
	161	npex == -1 .AND. pdims(2) == 1 ) THEN
	162	char1 = 'forced'
	163	ELSE
	164	char1 = 'predefined'
	165	ENDIF
	166	IF ( threads_per_task == 1 ) THEN
[102]	167	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	168	ELSE
[102]	169	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	170	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	171	ENDIF
	172	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	173	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	174	npex == -1 .AND. pdims(2) == 1 ) &
	175	THEN
[102]	176	WRITE ( io, 106 )
[1]	177	ELSEIF ( pdims(2) == 1 ) THEN
[102]	178	WRITE ( io, 107 ) 'x'
[1]	179	ELSEIF ( pdims(1) == 1 ) THEN
[102]	180	WRITE ( io, 107 ) 'y'
[1]	181	ENDIF
[102]	182	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	183	#endif
	184	WRITE ( io, 99 )
	185
	186	!
	187	!-- Numerical schemes
	188	WRITE ( io, 110 )
	189	IF ( psolver(1:7) == 'poisfft' ) THEN
	190	WRITE ( io, 111 ) TRIM( fft_method )
	191	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	192	ELSEIF ( psolver == 'sor' ) THEN
	193	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	194	ELSEIF ( psolver == 'multigrid' ) THEN
	195	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	196	IF ( mg_cycles == -1 ) THEN
	197	WRITE ( io, 140 ) residual_limit
	198	ELSE
	199	WRITE ( io, 141 ) mg_cycles
	200	ENDIF
	201	IF ( mg_switch_to_pe0_level == 0 ) THEN
	202	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	203	nzt_mg(1)
[197]	204	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	205	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	206	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	207	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	208	nzt_mg(mg_switch_to_pe0_level), &
	209	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	210	nzt_mg(1)
	211	ENDIF
	212	ENDIF
	213	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	214	THEN
	215	WRITE ( io, 142 )
	216	ENDIF
	217
	218	IF ( momentum_advec == 'pw-scheme' ) THEN
	219	WRITE ( io, 113 )
	220	ELSE
	221	WRITE ( io, 114 )
	222	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	223	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	224	overshoot_limit_w /= 0.0 ) THEN
	225	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	226	overshoot_limit_w
	227	ENDIF
	228	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	229	ups_limit_w /= 0.0 ) &
	230	THEN
	231	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	232	ENDIF
	233	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	234	ENDIF
	235	IF ( scalar_advec == 'pw-scheme' ) THEN
	236	WRITE ( io, 116 )
	237	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	238	WRITE ( io, 117 )
	239	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	240	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	241	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	242	ENDIF
	243	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	244	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	245	ENDIF
	246	ELSE
	247	WRITE ( io, 118 )
	248	ENDIF
[63]	249
	250	WRITE ( io, 139 ) TRIM( loop_optimization )
	251
[1]	252	IF ( galilei_transformation ) THEN
	253	IF ( use_ug_for_galilei_tr ) THEN
	254	char1 = 'geostrophic wind'
	255	ELSE
	256	char1 = 'mean wind in model domain'
	257	ENDIF
	258	IF ( simulated_time_at_begin == simulated_time ) THEN
	259	char2 = 'at the start of the run'
	260	ELSE
	261	char2 = 'at the end of the run'
	262	ENDIF
	263	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	264	advected_distance_x/1000.0, advected_distance_y/1000.0
	265	ENDIF
	266	IF ( timestep_scheme == 'leapfrog' ) THEN
	267	WRITE ( io, 120 )
	268	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	269	WRITE ( io, 121 )
	270	ELSE
	271	WRITE ( io, 122 ) timestep_scheme
	272	ENDIF
[87]	273	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	274	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	275	IF ( .NOT. ocean ) THEN
	276	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	277	rayleigh_damping_factor
	278	ELSE
	279	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	280	rayleigh_damping_factor
	281	ENDIF
[1]	282	ENDIF
[75]	283	IF ( humidity ) THEN
[1]	284	IF ( .NOT. cloud_physics ) THEN
	285	WRITE ( io, 129 )
	286	ELSE
	287	WRITE ( io, 130 )
	288	WRITE ( io, 131 )
	289	IF ( radiation ) WRITE ( io, 132 )
	290	IF ( precipitation ) WRITE ( io, 133 )
	291	ENDIF
	292	ENDIF
	293	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	294	IF ( conserve_volume_flow ) THEN
[241]	295	WRITE ( io, 150 ) conserve_volume_flow_mode
	296	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	297	WRITE ( io, 151 ) u_bulk, v_bulk
	298	ENDIF
[240]	299	ELSEIF ( dp_external ) THEN
	300	IF ( dp_smooth ) THEN
[241]	301	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	302	ELSE
[241]	303	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	304	ENDIF
	305	ENDIF
[1]	306	WRITE ( io, 99 )
	307
	308	!
	309	!-- Runtime and timestep informations
	310	WRITE ( io, 200 )
	311	IF ( .NOT. dt_fixed ) THEN
	312	WRITE ( io, 201 ) dt_max, cfl_factor
	313	ELSE
	314	WRITE ( io, 202 ) dt
	315	ENDIF
	316	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	317
	318	IF ( time_restart /= 9999999.9 .AND. &
	319	simulated_time_at_begin == simulated_time ) THEN
	320	IF ( dt_restart == 9999999.9 ) THEN
	321	WRITE ( io, 204 ) ' Restart at: ',time_restart
	322	ELSE
	323	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	324	ENDIF
	325	ENDIF
	326
	327	IF ( simulated_time_at_begin /= simulated_time ) THEN
	328	i = MAX ( log_point_s(10)%counts, 1 )
	329	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	330	cpuseconds_per_simulated_second = 0.0
	331	ELSE
	332	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	333	( simulated_time - &
	334	simulated_time_at_begin )
	335	ENDIF
	336	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	337	log_point_s(10)%sum / REAL( i ), &
	338	cpuseconds_per_simulated_second
	339	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	340	IF ( dt_restart == 9999999.9 ) THEN
	341	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	342	ELSE
	343	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	344	ENDIF
	345	ENDIF
	346	ENDIF
	347
	348	!
	349	!-- Computational grid
[94]	350	IF ( .NOT. ocean ) THEN
	351	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	352	IF ( dz_stretch_level_index < nzt+1 ) THEN
	353	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	354	dz_stretch_factor, dz_max
	355	ENDIF
	356	ELSE
	357	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	358	IF ( dz_stretch_level_index > 0 ) THEN
	359	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	360	dz_stretch_factor, dz_max
	361	ENDIF
[1]	362	ENDIF
	363	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	364	MIN( nnz+2, nzt+2 )
[76]	365	IF ( numprocs > 1 ) THEN
	366	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	367	WRITE ( io, 255 )
	368	ELSE
	369	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	370	ENDIF
[1]	371	ENDIF
	372	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	373
	374	!
	375	!-- Topography
	376	WRITE ( io, 270 ) topography
	377	SELECT CASE ( TRIM( topography ) )
	378
	379	CASE ( 'flat' )
	380	! no actions necessary
	381
	382	CASE ( 'single_building' )
	383	blx = INT( building_length_x / dx )
	384	bly = INT( building_length_y / dy )
	385	bh = INT( building_height / dz )
	386
	387	IF ( building_wall_left == 9999999.9 ) THEN
	388	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	389	ENDIF
	390	bxl = INT ( building_wall_left / dx + 0.5 )
	391	bxr = bxl + blx
	392
	393	IF ( building_wall_south == 9999999.9 ) THEN
	394	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	395	ENDIF
	396	bys = INT ( building_wall_south / dy + 0.5 )
	397	byn = bys + bly
	398
	399	WRITE ( io, 271 ) building_length_x, building_length_y, &
	400	building_height, bxl, bxr, bys, byn
	401
[240]	402	CASE ( 'single_street_canyon' )
	403	ch = NINT( canyon_height / dz )
	404	IF ( canyon_width_x /= 9999999.9 ) THEN
	405	!
	406	!-- Street canyon in y direction
	407	cwx = NINT( canyon_width_x / dx )
	408	IF ( canyon_wall_left == 9999999.9 ) THEN
	409	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	410	ENDIF
	411	cxl = NINT( canyon_wall_left / dx )
	412	cxr = cxl + cwx
	413	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	414
	415	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	416	!
	417	!-- Street canyon in x direction
	418	cwy = NINT( canyon_width_y / dy )
	419	IF ( canyon_wall_south == 9999999.9 ) THEN
	420	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	421	ENDIF
	422	cys = NINT( canyon_wall_south / dy )
	423	cyn = cys + cwy
	424	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	425	ENDIF
	426
[1]	427	END SELECT
	428
[256]	429	IF ( TRIM( topography ) /= 'flat' ) THEN
	430	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	431	IF ( TRIM( topography ) == 'single_building' .OR. &
	432	TRIM( topography ) == 'single_street_canyon' ) THEN
	433	WRITE ( io, 278 )
	434	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	435	WRITE ( io, 279 )
	436	ENDIF
	437	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	438	WRITE ( io, 278 )
	439	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	440	WRITE ( io, 279 )
	441	ENDIF
	442	ENDIF
	443
[138]	444	IF ( plant_canopy ) THEN
	445
	446	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	447	IF ( passive_scalar ) THEN
	448	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	449	leaf_surface_concentration
	450	ENDIF
[138]	451
[1]	452	!
[153]	453	!-- Heat flux at the top of vegetation
	454	WRITE ( io, 282 ) cthf
	455
	456	!
[138]	457	!-- Leaf area density profile
	458	!-- Building output strings, starting with surface value
	459	WRITE ( learde, '(F6.2)' ) lad_surface
	460	gradients = '------'
	461	slices = ' 0'
	462	coordinates = ' 0.0'
	463	i = 1
	464	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	465
	466	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	467	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	468
	469	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	470	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	471
	472	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	473	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	474
	475	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	476	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	477
	478	i = i + 1
	479	ENDDO
	480
[153]	481	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	482	TRIM( gradients ), TRIM( slices )
	483
	484	ENDIF
	485
	486	!
[1]	487	!-- Boundary conditions
	488	IF ( ibc_p_b == 0 ) THEN
	489	runten = 'p(0) = 0 \|'
	490	ELSEIF ( ibc_p_b == 1 ) THEN
	491	runten = 'p(0) = p(1) \|'
	492	ELSE
	493	runten = 'p(0) = p(1) +R\|'
	494	ENDIF
	495	IF ( ibc_p_t == 0 ) THEN
	496	roben = 'p(nzt+1) = 0 \|'
	497	ELSE
	498	roben = 'p(nzt+1) = p(nzt) \|'
	499	ENDIF
	500
	501	IF ( ibc_uv_b == 0 ) THEN
	502	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	503	ELSE
	504	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	505	ENDIF
[132]	506	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	507	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	508	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	509	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	510	ELSE
	511	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	512	ENDIF
	513
	514	IF ( ibc_pt_b == 0 ) THEN
	515	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	516	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	517	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	518	ELSEIF ( ibc_pt_b == 2 ) THEN
	519	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	520	ENDIF
	521	IF ( ibc_pt_t == 0 ) THEN
[19]	522	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	523	ELSEIF( ibc_pt_t == 1 ) THEN
	524	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	525	ELSEIF( ibc_pt_t == 2 ) THEN
	526	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	527	ENDIF
	528
	529	WRITE ( io, 300 ) runten, roben
	530
	531	IF ( .NOT. constant_diffusion ) THEN
	532	IF ( ibc_e_b == 1 ) THEN
	533	runten = 'e(0) = e(1)'
	534	ELSE
	535	runten = 'e(0) = e(1) = (u/0.1)*2'
	536	ENDIF
	537	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	538
[97]	539	WRITE ( io, 301 ) 'e', runten, roben
[1]	540
	541	ENDIF
	542
[97]	543	IF ( ocean ) THEN
	544	runten = 'sa(0) = sa(1)'
	545	IF ( ibc_sa_t == 0 ) THEN
	546	roben = 'sa(nzt+1) = sa_surface'
[1]	547	ELSE
[97]	548	roben = 'sa(nzt+1) = sa(nzt)'
[1]	549	ENDIF
[97]	550	WRITE ( io, 301 ) 'sa', runten, roben
	551	ENDIF
[1]	552
[97]	553	IF ( humidity ) THEN
	554	IF ( ibc_q_b == 0 ) THEN
	555	runten = 'q(0) = q_surface'
	556	ELSE
	557	runten = 'q(0) = q(1)'
	558	ENDIF
	559	IF ( ibc_q_t == 0 ) THEN
	560	roben = 'q(nzt) = q_top'
	561	ELSE
	562	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	563	ENDIF
	564	WRITE ( io, 301 ) 'q', runten, roben
	565	ENDIF
[1]	566
[97]	567	IF ( passive_scalar ) THEN
	568	IF ( ibc_q_b == 0 ) THEN
	569	runten = 's(0) = s_surface'
	570	ELSE
	571	runten = 's(0) = s(1)'
	572	ENDIF
	573	IF ( ibc_q_t == 0 ) THEN
	574	roben = 's(nzt) = s_top'
	575	ELSE
	576	roben = 's(nzt) = s(nzt-1) + ds/dz'
	577	ENDIF
	578	WRITE ( io, 301 ) 's', runten, roben
[1]	579	ENDIF
	580
	581	IF ( use_surface_fluxes ) THEN
	582	WRITE ( io, 303 )
	583	IF ( constant_heatflux ) THEN
	584	WRITE ( io, 306 ) surface_heatflux
	585	IF ( random_heatflux ) WRITE ( io, 307 )
	586	ENDIF
[75]	587	IF ( humidity .AND. constant_waterflux ) THEN
[1]	588	WRITE ( io, 311 ) surface_waterflux
	589	ENDIF
	590	IF ( passive_scalar .AND. constant_waterflux ) THEN
	591	WRITE ( io, 313 ) surface_waterflux
	592	ENDIF
	593	ENDIF
	594
[19]	595	IF ( use_top_fluxes ) THEN
	596	WRITE ( io, 304 )
[102]	597	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	598	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	599	IF ( constant_top_heatflux ) THEN
	600	WRITE ( io, 306 ) top_heatflux
	601	ENDIF
	602	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	603	WRITE ( io, 316 )
[19]	604	ENDIF
[97]	605	IF ( ocean .AND. constant_top_salinityflux ) THEN
	606	WRITE ( io, 309 ) top_salinityflux
	607	ENDIF
[75]	608	IF ( humidity .OR. passive_scalar ) THEN
[19]	609	WRITE ( io, 315 )
	610	ENDIF
	611	ENDIF
	612
[1]	613	IF ( prandtl_layer ) THEN
[94]	614	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	615	rif_min, rif_max
[1]	616	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	617	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	618	WRITE ( io, 312 )
	619	ENDIF
	620	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	621	WRITE ( io, 314 )
	622	ENDIF
	623	ELSE
	624	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	625	WRITE ( io, 310 ) rif_min, rif_max
	626	ENDIF
	627	ENDIF
	628
	629	WRITE ( io, 317 ) bc_lr, bc_ns
	630	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	631	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	632	IF ( turbulent_inflow ) THEN
	633	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	634	inflow_damping_height, inflow_damping_width
	635	ENDIF
[1]	636	ENDIF
	637
	638	!
	639	!-- Listing of 1D-profiles
[151]	640	WRITE ( io, 325 ) dt_dopr_listing
[1]	641	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	642	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	643	ENDIF
	644
	645	!
	646	!-- DATA output
	647	WRITE ( io, 330 )
	648	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	649	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	650	ENDIF
	651
	652	!
	653	!-- 1D-profiles
[254]	654	dopr_chr = 'Pofile:'
[1]	655	IF ( dopr_n /= 0 ) THEN
	656	WRITE ( io, 331 )
	657
	658	output_format = ''
	659	IF ( netcdf_output ) THEN
	660	IF ( netcdf_64bit ) THEN
	661	output_format = 'netcdf (64 bit offset)'
	662	ELSE
	663	output_format = 'netcdf'
	664	ENDIF
	665	ENDIF
	666	IF ( profil_output ) THEN
	667	IF ( netcdf_output ) THEN
	668	output_format = TRIM( output_format ) // ' and profil'
	669	ELSE
	670	output_format = 'profil'
	671	ENDIF
	672	ENDIF
	673	WRITE ( io, 345 ) output_format
	674
	675	DO i = 1, dopr_n
	676	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	677	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	678	WRITE ( io, 332 ) dopr_chr
	679	dopr_chr = ' :'
	680	ENDIF
	681	ENDDO
	682
	683	IF ( dopr_chr /= '' ) THEN
	684	WRITE ( io, 332 ) dopr_chr
	685	ENDIF
	686	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	687	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	688	ENDIF
	689
	690	!
	691	!-- 2D-arrays
	692	DO av = 0, 1
	693
	694	i = 1
	695	do2d_xy = ''
	696	do2d_xz = ''
	697	do2d_yz = ''
	698	DO WHILE ( do2d(av,i) /= ' ' )
	699
	700	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	701	do2d_mode = do2d(av,i)(l-1:l)
	702
	703	SELECT CASE ( do2d_mode )
	704	CASE ( 'xy' )
	705	ll = LEN_TRIM( do2d_xy )
	706	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	707	CASE ( 'xz' )
	708	ll = LEN_TRIM( do2d_xz )
	709	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	710	CASE ( 'yz' )
	711	ll = LEN_TRIM( do2d_yz )
	712	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	713	END SELECT
	714
	715	i = i + 1
	716
	717	ENDDO
	718
	719	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	720	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	721	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	722	( netcdf_output .OR. iso2d_output ) ) THEN
	723
	724	IF ( av == 0 ) THEN
	725	WRITE ( io, 334 ) ''
	726	ELSE
	727	WRITE ( io, 334 ) '(time-averaged)'
	728	ENDIF
	729
	730	IF ( do2d_at_begin ) THEN
	731	begin_chr = 'and at the start'
	732	ELSE
	733	begin_chr = ''
	734	ENDIF
	735
	736	output_format = ''
	737	IF ( netcdf_output ) THEN
	738	IF ( netcdf_64bit ) THEN
	739	output_format = 'netcdf (64 bit offset)'
	740	ELSE
	741	output_format = 'netcdf'
	742	ENDIF
	743	ENDIF
	744	IF ( iso2d_output ) THEN
	745	IF ( netcdf_output ) THEN
	746	output_format = TRIM( output_format ) // ' and iso2d'
	747	ELSE
	748	output_format = 'iso2d'
	749	ENDIF
	750	ENDIF
	751	WRITE ( io, 345 ) output_format
	752
	753	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	754	i = 1
	755	slices = '/'
	756	coordinates = '/'
	757	!
	758	!-- Building strings with index and coordinate informations of the
	759	!-- slices
	760	DO WHILE ( section(i,1) /= -9999 )
	761
	762	WRITE (section_chr,'(I5)') section(i,1)
	763	section_chr = ADJUSTL( section_chr )
	764	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	765
[206]	766	IF ( section(i,1) == -1 ) THEN
	767	WRITE (coor_chr,'(F10.1)') -1.0
	768	ELSE
	769	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	770	ENDIF
[1]	771	coor_chr = ADJUSTL( coor_chr )
	772	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	773
	774	i = i + 1
	775	ENDDO
	776	IF ( av == 0 ) THEN
	777	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	778	TRIM( begin_chr ), 'k', TRIM( slices ), &
	779	TRIM( coordinates )
	780	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	781	WRITE ( io, 339 ) skip_time_do2d_xy
	782	ENDIF
	783	ELSE
	784	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	785	TRIM( begin_chr ), averaging_interval, &
	786	dt_averaging_input, 'k', TRIM( slices ), &
	787	TRIM( coordinates )
	788	IF ( skip_time_data_output_av /= 0.0 ) THEN
	789	WRITE ( io, 339 ) skip_time_data_output_av
	790	ENDIF
	791	ENDIF
	792
	793	ENDIF
	794
	795	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	796	i = 1
	797	slices = '/'
	798	coordinates = '/'
	799	!
	800	!-- Building strings with index and coordinate informations of the
	801	!-- slices
	802	DO WHILE ( section(i,2) /= -9999 )
	803
	804	WRITE (section_chr,'(I5)') section(i,2)
	805	section_chr = ADJUSTL( section_chr )
	806	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	807
	808	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	809	coor_chr = ADJUSTL( coor_chr )
	810	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	811
	812	i = i + 1
	813	ENDDO
	814	IF ( av == 0 ) THEN
	815	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	816	TRIM( begin_chr ), 'j', TRIM( slices ), &
	817	TRIM( coordinates )
	818	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	819	WRITE ( io, 339 ) skip_time_do2d_xz
	820	ENDIF
	821	ELSE
	822	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	823	TRIM( begin_chr ), averaging_interval, &
	824	dt_averaging_input, 'j', TRIM( slices ), &
	825	TRIM( coordinates )
	826	IF ( skip_time_data_output_av /= 0.0 ) THEN
	827	WRITE ( io, 339 ) skip_time_data_output_av
	828	ENDIF
	829	ENDIF
	830	ENDIF
	831
	832	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	833	i = 1
	834	slices = '/'
	835	coordinates = '/'
	836	!
	837	!-- Building strings with index and coordinate informations of the
	838	!-- slices
	839	DO WHILE ( section(i,3) /= -9999 )
	840
	841	WRITE (section_chr,'(I5)') section(i,3)
	842	section_chr = ADJUSTL( section_chr )
	843	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	844
	845	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	846	coor_chr = ADJUSTL( coor_chr )
	847	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	848
	849	i = i + 1
	850	ENDDO
	851	IF ( av == 0 ) THEN
	852	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	853	TRIM( begin_chr ), 'i', TRIM( slices ), &
	854	TRIM( coordinates )
	855	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	856	WRITE ( io, 339 ) skip_time_do2d_yz
	857	ENDIF
	858	ELSE
	859	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	860	TRIM( begin_chr ), averaging_interval, &
	861	dt_averaging_input, 'i', TRIM( slices ), &
	862	TRIM( coordinates )
	863	IF ( skip_time_data_output_av /= 0.0 ) THEN
	864	WRITE ( io, 339 ) skip_time_data_output_av
	865	ENDIF
	866	ENDIF
	867	ENDIF
	868
	869	ENDIF
	870
	871	ENDDO
	872
	873	!
	874	!-- 3d-arrays
	875	DO av = 0, 1
	876
	877	i = 1
	878	do3d_chr = ''
	879	DO WHILE ( do3d(av,i) /= ' ' )
	880
	881	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	882	i = i + 1
	883
	884	ENDDO
	885
	886	IF ( do3d_chr /= '' ) THEN
	887	IF ( av == 0 ) THEN
	888	WRITE ( io, 336 ) ''
	889	ELSE
	890	WRITE ( io, 336 ) '(time-averaged)'
	891	ENDIF
	892
	893	output_format = ''
	894	IF ( netcdf_output ) THEN
[46]	895	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	896	output_format = 'netcdf (64 bit offset)'
	897	ELSE
	898	output_format = 'netcdf'
	899	ENDIF
	900	ENDIF
	901	IF ( avs_output ) THEN
	902	IF ( netcdf_output ) THEN
	903	output_format = TRIM( output_format ) // ' and avs'
	904	ELSE
	905	output_format = 'avs'
	906	ENDIF
	907	ENDIF
	908	WRITE ( io, 345 ) output_format
	909
	910	IF ( do3d_at_begin ) THEN
	911	begin_chr = 'and at the start'
	912	ELSE
	913	begin_chr = ''
	914	ENDIF
	915	IF ( av == 0 ) THEN
	916	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	917	zu(nz_do3d), nz_do3d
	918	ELSE
	919	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	920	TRIM( begin_chr ), averaging_interval, &
	921	dt_averaging_input, zu(nz_do3d), nz_do3d
	922	ENDIF
	923
	924	IF ( do3d_compress ) THEN
	925	do3d_chr = ''
	926	i = 1
	927	DO WHILE ( do3d(av,i) /= ' ' )
	928
	929	SELECT CASE ( do3d(av,i) )
	930	CASE ( 'u' )
	931	j = 1
	932	CASE ( 'v' )
	933	j = 2
	934	CASE ( 'w' )
	935	j = 3
	936	CASE ( 'p' )
	937	j = 4
	938	CASE ( 'pt' )
	939	j = 5
	940	END SELECT
	941	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	942	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	943	':' // prec // ','
	944	i = i + 1
	945
	946	ENDDO
	947	WRITE ( io, 338 ) do3d_chr
	948
	949	ENDIF
	950
	951	IF ( av == 0 ) THEN
	952	IF ( skip_time_do3d /= 0.0 ) THEN
	953	WRITE ( io, 339 ) skip_time_do3d
	954	ENDIF
	955	ELSE
	956	IF ( skip_time_data_output_av /= 0.0 ) THEN
	957	WRITE ( io, 339 ) skip_time_data_output_av
	958	ENDIF
	959	ENDIF
	960
	961	ENDIF
	962
	963	ENDDO
	964
	965	!
	966	!-- Timeseries
	967	IF ( dt_dots /= 9999999.9 ) THEN
	968	WRITE ( io, 340 )
	969
	970	output_format = ''
	971	IF ( netcdf_output ) THEN
	972	IF ( netcdf_64bit ) THEN
	973	output_format = 'netcdf (64 bit offset)'
	974	ELSE
	975	output_format = 'netcdf'
	976	ENDIF
	977	ENDIF
	978	IF ( profil_output ) THEN
	979	IF ( netcdf_output ) THEN
	980	output_format = TRIM( output_format ) // ' and profil'
	981	ELSE
	982	output_format = 'profil'
	983	ENDIF
	984	ENDIF
	985	WRITE ( io, 345 ) output_format
	986	WRITE ( io, 341 ) dt_dots
	987	ENDIF
	988
	989	#if defined( __dvrp_graphics )
	990	!
	991	!-- Dvrp-output
	992	IF ( dt_dvrp /= 9999999.9 ) THEN
	993	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	994	TRIM( dvrp_username ), TRIM( dvrp_directory )
	995	i = 1
	996	l = 0
	997	DO WHILE ( mode_dvrp(i) /= ' ' )
	998	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	999	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1000	l = l + 1
	1001	IF ( do3d(0,j) /= ' ' ) THEN
	1002	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	1003	ENDIF
	1004	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1005	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	1006	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	1007	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	1008	WRITE ( io, 363 )
	1009	ENDIF
	1010	i = i + 1
	1011	ENDDO
[237]	1012
	1013	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
	1014	WRITE ( io, 364 ) cluster_size
	1015	ENDIF
	1016
[1]	1017	ENDIF
	1018	#endif
	1019
	1020	#if defined( __spectra )
	1021	!
	1022	!-- Spectra output
	1023	IF ( dt_dosp /= 9999999.9 ) THEN
	1024	WRITE ( io, 370 )
	1025
	1026	output_format = ''
	1027	IF ( netcdf_output ) THEN
	1028	IF ( netcdf_64bit ) THEN
	1029	output_format = 'netcdf (64 bit offset)'
	1030	ELSE
	1031	output_format = 'netcdf'
	1032	ENDIF
	1033	ENDIF
	1034	IF ( profil_output ) THEN
	1035	IF ( netcdf_output ) THEN
	1036	output_format = TRIM( output_format ) // ' and profil'
	1037	ELSE
	1038	output_format = 'profil'
	1039	ENDIF
	1040	ENDIF
	1041	WRITE ( io, 345 ) output_format
	1042	WRITE ( io, 371 ) dt_dosp
	1043	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1044	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1045	( spectra_direction(i), i = 1,10 ), &
[189]	1046	( comp_spectra_level(i), i = 1,100 ), &
	1047	( plot_spectra_level(i), i = 1,100 ), &
[1]	1048	averaging_interval_sp, dt_averaging_input_pr
	1049	ENDIF
	1050	#endif
	1051
	1052	WRITE ( io, 99 )
	1053
	1054	!
	1055	!-- Physical quantities
	1056	WRITE ( io, 400 )
	1057
	1058	!
	1059	!-- Geostrophic parameters
	1060	WRITE ( io, 410 ) omega, phi, f, fs
	1061
	1062	!
	1063	!-- Other quantities
	1064	WRITE ( io, 411 ) g
[97]	1065	IF ( use_reference ) THEN
	1066	IF ( ocean ) THEN
	1067	WRITE ( io, 412 ) prho_reference
	1068	ELSE
	1069	WRITE ( io, 413 ) pt_reference
	1070	ENDIF
	1071	ENDIF
[1]	1072
	1073	!
	1074	!-- Cloud physics parameters
	1075	IF ( cloud_physics ) THEN
[57]	1076	WRITE ( io, 415 )
	1077	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1078	ENDIF
	1079
	1080	!-- Profile of the geostrophic wind (component ug)
	1081	!-- Building output strings
	1082	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1083	gradients = '------'
	1084	slices = ' 0'
	1085	coordinates = ' 0.0'
	1086	i = 1
	1087	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1088
[167]	1089	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1090	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1091
[167]	1092	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1093	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1094
[167]	1095	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1096	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1097
[167]	1098	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1099	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1100
	1101	i = i + 1
	1102	ENDDO
	1103
	1104	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1105	TRIM( gradients ), TRIM( slices )
	1106
	1107	!-- Profile of the geostrophic wind (component vg)
	1108	!-- Building output strings
	1109	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1110	gradients = '------'
	1111	slices = ' 0'
	1112	coordinates = ' 0.0'
	1113	i = 1
	1114	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1115
[167]	1116	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1117	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1118
[167]	1119	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1120	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1121
[167]	1122	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1123	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1124
[167]	1125	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1126	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1127
	1128	i = i + 1
	1129	ENDDO
	1130
	1131	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1132	TRIM( gradients ), TRIM( slices )
	1133
	1134	!
	1135	!-- Initial temperature profile
	1136	!-- Building output strings, starting with surface temperature
	1137	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1138	gradients = '------'
	1139	slices = ' 0'
	1140	coordinates = ' 0.0'
	1141	i = 1
	1142	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1143
[94]	1144	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1145	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1146
[94]	1147	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1148	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1149
[94]	1150	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1151	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1152
[94]	1153	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1154	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1155
	1156	i = i + 1
	1157	ENDDO
	1158
	1159	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1160	TRIM( gradients ), TRIM( slices )
	1161
	1162	!
	1163	!-- Initial humidity profile
	1164	!-- Building output strings, starting with surface humidity
[75]	1165	IF ( humidity .OR. passive_scalar ) THEN
[1]	1166	WRITE ( temperatures, '(E8.1)' ) q_surface
	1167	gradients = '--------'
	1168	slices = ' 0'
	1169	coordinates = ' 0.0'
	1170	i = 1
	1171	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1172
	1173	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1174	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1175
	1176	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1177	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1178
	1179	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1180	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1181
	1182	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1183	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1184
	1185	i = i + 1
	1186	ENDDO
	1187
[75]	1188	IF ( humidity ) THEN
[1]	1189	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1190	TRIM( gradients ), TRIM( slices )
	1191	ELSE
	1192	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1193	TRIM( gradients ), TRIM( slices )
	1194	ENDIF
	1195	ENDIF
	1196
	1197	!
[97]	1198	!-- Initial salinity profile
	1199	!-- Building output strings, starting with surface salinity
	1200	IF ( ocean ) THEN
	1201	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1202	gradients = '------'
	1203	slices = ' 0'
	1204	coordinates = ' 0.0'
	1205	i = 1
	1206	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1207
	1208	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1209	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1210
	1211	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1212	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1213
	1214	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1215	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1216
	1217	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1218	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1219
	1220	i = i + 1
	1221	ENDDO
	1222
	1223	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1224	TRIM( gradients ), TRIM( slices )
	1225	ENDIF
	1226
	1227	!
[1]	1228	!-- LES / turbulence parameters
	1229	WRITE ( io, 450 )
	1230
	1231	!--
	1232	! ... LES-constants used must still be added here
	1233	!--
	1234	IF ( constant_diffusion ) THEN
	1235	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1236	prandtl_number
	1237	ENDIF
	1238	IF ( .NOT. constant_diffusion) THEN
[108]	1239	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1240	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1241	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1242	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1243	ENDIF
	1244
	1245	!
	1246	!-- Special actions during the run
	1247	WRITE ( io, 470 )
	1248	IF ( create_disturbances ) THEN
	1249	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1250	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1251	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1252	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1253	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1254	ELSE
	1255	WRITE ( io, 473 ) disturbance_energy_limit
	1256	ENDIF
	1257	WRITE ( io, 474 ) TRIM( random_generator )
	1258	ENDIF
	1259	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1260	WRITE ( io, 475 ) pt_surface_initial_change
	1261	ENDIF
[75]	1262	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1263	WRITE ( io, 476 ) q_surface_initial_change
	1264	ENDIF
	1265	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1266	WRITE ( io, 477 ) q_surface_initial_change
	1267	ENDIF
	1268
[60]	1269	IF ( particle_advection ) THEN
[1]	1270	!
[60]	1271	!-- Particle attributes
	1272	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1273	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1274	end_time_prel, dt_sort_particles
[60]	1275	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1276	IF ( random_start_position ) WRITE ( io, 481 )
	1277	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1278	WRITE ( io, 495 ) total_number_of_particles
	1279	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1280	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1281	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1282	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1283	WRITE ( io, 484 ) total_number_of_tails, &
	1284	minimum_tailpoint_distance, &
	1285	maximum_tailpoint_age
	1286	ENDIF
[1]	1287	ENDIF
[60]	1288	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1289	WRITE ( io, 485 ) dt_write_particle_data
	1290	output_format = ''
	1291	IF ( netcdf_output ) THEN
	1292	IF ( netcdf_64bit ) THEN
	1293	output_format = 'netcdf (64 bit offset) and binary'
	1294	ELSE
	1295	output_format = 'netcdf and binary'
	1296	ENDIF
[1]	1297	ELSE
[60]	1298	output_format = 'binary'
[1]	1299	ENDIF
[60]	1300	WRITE ( io, 345 ) output_format
[1]	1301	ENDIF
[60]	1302	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1303	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1304
[60]	1305	WRITE ( io, 487 ) number_of_particle_groups
[1]	1306
[60]	1307	DO i = 1, number_of_particle_groups
	1308	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1309	WRITE ( io, 490 ) i, 0.0
	1310	WRITE ( io, 492 )
[1]	1311	ELSE
[60]	1312	WRITE ( io, 490 ) i, radius(i)
	1313	IF ( density_ratio(i) /= 0.0 ) THEN
	1314	WRITE ( io, 491 ) density_ratio(i)
	1315	ELSE
	1316	WRITE ( io, 492 )
	1317	ENDIF
[1]	1318	ENDIF
[60]	1319	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1320	pdx(i), pdy(i), pdz(i)
	1321	ENDDO
[1]	1322
[60]	1323	ENDIF
[1]	1324
[60]	1325
[1]	1326	!
	1327	!-- Parameters of 1D-model
	1328	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1329	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1330	mixing_length_1d, dissipation_1d
	1331	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1332	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1333	ENDIF
	1334	ENDIF
	1335
	1336	!
	1337	!-- User-defined informations
	1338	CALL user_header( io )
	1339
	1340	WRITE ( io, 99 )
	1341
	1342	!
	1343	!-- Write buffer contents to disc immediately
[82]	1344	CALL local_flush( io )
[1]	1345
	1346	!
	1347	!-- Here the FORMATs start
	1348
	1349	99 FORMAT (1X,78('-'))
[200]	1350	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1351	1X,'* ',A,' *',9X,A/ &
	1352	1X,'***************************',9X,42('-'))
[102]	1353	101 FORMAT (37X,'coupled run: ',A/ &
	1354	37X,42('-'))
[200]	1355	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1356	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1357	' Run on host: ',A10)
[1]	1358	#if defined( __parallel )
[200]	1359	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1360	')',1X,A)
[200]	1361	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1362	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1363	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1364	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1365	37X,'because the job is running on an SMP-cluster')
[102]	1366	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1367	#endif
	1368	110 FORMAT (/' Numerical Schemes:'/ &
	1369	' -----------------'/)
	1370	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1371	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1372	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1373	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1374	' or Upstream')
	1375	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1376	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1377	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1378	' or Upstream')
	1379	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1380	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1381	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1382	' Translation velocity = ',A/ &
	1383	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1384	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1385	' of timestep changes)')
	1386	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1387	' timestep changes')
	1388	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1389	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1390	' maximum damping coefficient: ',F5.3, ' 1/s')
	1391	124 FORMAT (' Spline-overshoots are being suppressed')
	1392	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1393	' of'/ &
	1394	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1395	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1396	' of'/ &
	1397	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1398	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1399	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1400	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1401	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1402	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1403	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1404	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1405	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1406	' effective emissivity scheme')
	1407	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1408	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1409	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1410	A,'-cycle)'/ &
	1411	' number of grid levels: ',I2/ &
	1412	' Gauss-Seidel red/black iterations: ',I2)
	1413	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1414	I3,')')
	1415	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1416	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1417	I3,')'/ &
	1418	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1419	I3,')')
	1420	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1421	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1422	140 FORMAT (' maximum residual allowed: ',E10.3)
	1423	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1424	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1425	'step')
[87]	1426	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1427	'kinetic energy')
[1]	1428	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1429	'conserved'/ &
	1430	' using the ',A,' mode')
	1431	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
	1432	152 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
[240]	1433	2(1X,E12.5),'Pa/m', &
	1434	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
	1435	A /)
[1]	1436	200 FORMAT (//' Run time and time step information:'/ &
	1437	' ----------------------------------'/)
	1438	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1439	' CFL-factor: ',F4.2)
	1440	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1441	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1442	' End time: ',F9.3,' s')
	1443	204 FORMAT ( A,F9.3,' s')
	1444	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1445	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1446	' CPU-time used: ',F9.3,' s per timestep: ', &
	1447	' ',F9.3,' s'/ &
	1448	' per second of simulated tim', &
	1449	'e: ',F9.3,' s')
	1450	250 FORMAT (//' Computational grid and domain size:'/ &
	1451	' ----------------------------------'// &
	1452	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1453	' m dz = ',F7.3,' m'/ &
	1454	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1455	' m z(u) = ',F10.3,' m'/)
	1456	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1457	' factor: ',F5.3/ &
	1458	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1459	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1460	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1461	255 FORMAT (' Subdomains have equal size')
	1462	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1463	'have smaller sizes'/ &
	1464	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1465	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1466	' degrees')
	1467	270 FORMAT (//' Topography informations:'/ &
	1468	' -----------------------'// &
	1469	1X,'Topography: ',A)
	1470	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1471	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1472	' / ',I4)
[240]	1473	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1474	' direction' / &
	1475	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1476	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1477	278 FORMAT (' Topography grid definition convention:'/ &
	1478	' cell edge (staggered grid points'/ &
	1479	' (u in x-direction, v in y-direction))' /)
	1480	279 FORMAT (' Topography grid definition convention:'/ &
	1481	' cell center (scalar grid points)' /)
[138]	1482	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1483	' ------------------------------'// &
	1484	' Canopy mode: ', A / &
	1485	' Canopy top: ',I4 / &
	1486	' Leaf drag coefficient: ',F6.2 /)
[153]	1487	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1488	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1489	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1490	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1491	' Height: ',A,' m'/ &
	1492	' Leaf area density: ',A,' m2/m3'/ &
	1493	' Gradient: ',A,' m2/m4'/ &
	1494	' Gridpoint: ',A)
	1495
[1]	1496	300 FORMAT (//' Boundary conditions:'/ &
	1497	' -------------------'// &
	1498	' p uv ', &
	1499	' pt'// &
	1500	' B. bound.: ',A/ &
	1501	' T. bound.: ',A)
[97]	1502	301 FORMAT (/' ',A// &
[1]	1503	' B. bound.: ',A/ &
	1504	' T. bound.: ',A)
[19]	1505	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1506	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1507	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1508	'computational u,v-level:'// &
[1]	1509	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1510	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1511	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1512	307 FORMAT (' Heatflux has a random normal distribution')
	1513	308 FORMAT (' Predefined surface temperature')
[97]	1514	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1515	310 FORMAT (//' 1D-Model:'// &
	1516	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1517	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1518	312 FORMAT (' Predefined surface humidity')
	1519	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1520	314 FORMAT (' Predefined scalar value at the surface')
[19]	1521	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1522	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1523	'atmosphere model')
[1]	1524	317 FORMAT (//' Lateral boundaries:'/ &
	1525	' left/right: ',A/ &
	1526	' north/south: ',A)
	1527	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1528	'max =',F5.1,' m**2/s')
[151]	1529	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1530	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1531	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1532	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1533	' v: ',F9.6,' m2/s2')
[151]	1534	325 FORMAT (//' List output:'/ &
[1]	1535	' -----------'// &
	1536	' 1D-Profiles:'/ &
	1537	' Output every ',F8.2,' s')
[151]	1538	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1539	' Averaging input every ',F8.2,' s')
	1540	330 FORMAT (//' Data output:'/ &
	1541	' -----------'/)
	1542	331 FORMAT (/' 1D-Profiles:')
	1543	332 FORMAT (/' ',A)
	1544	333 FORMAT (' Output every ',F8.2,' s',/ &
	1545	' Time averaged over ',F8.2,' s'/ &
	1546	' Averaging input every ',F8.2,' s')
	1547	334 FORMAT (/' 2D-Arrays',A,':')
	1548	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1549	' Output every ',F8.2,' s ',A/ &
	1550	' Cross sections at ',A1,' = ',A/ &
	1551	' scalar-coordinates: ',A,' m'/)
	1552	336 FORMAT (/' 3D-Arrays',A,':')
	1553	337 FORMAT (/' Arrays: ',A/ &
	1554	' Output every ',F8.2,' s ',A/ &
	1555	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1556	338 FORMAT (' Compressed data output'/ &
	1557	' Decimal precision: ',A/)
	1558	339 FORMAT (' No output during initial ',F8.2,' s')
	1559	340 FORMAT (/' Time series:')
	1560	341 FORMAT (' Output every ',F8.2,' s'/)
	1561	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1562	' Output every ',F8.2,' s ',A/ &
	1563	' Time averaged over ',F8.2,' s'/ &
	1564	' Averaging input every ',F8.2,' s'/ &
	1565	' Cross sections at ',A1,' = ',A/ &
	1566	' scalar-coordinates: ',A,' m'/)
	1567	343 FORMAT (/' Arrays: ',A/ &
	1568	' Output every ',F8.2,' s ',A/ &
	1569	' Time averaged over ',F8.2,' s'/ &
	1570	' Averaging input every ',F8.2,' s'/ &
	1571	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1572	345 FORMAT (' Output format: ',A/)
	1573	#if defined( __dvrp_graphics )
	1574	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1575	' Output every ',F7.1,' s'/ &
	1576	' Output mode: ',A/ &
	1577	' Host / User: ',A,' / ',A/ &
	1578	' Directory: ',A// &
	1579	' The sequence contains:')
	1580	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1581	362 FORMAT (' Sectional plane ',A)
	1582	363 FORMAT (' Particles')
[237]	1583	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
[1]	1584	#endif
	1585	#if defined( __spectra )
	1586	370 FORMAT (' Spectra:')
	1587	371 FORMAT (' Output every ',F7.1,' s'/)
	1588	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1589	' Directions: ', 10(A5,',')/ &
[189]	1590	' height levels k = ', 20(I3,',')/ &
	1591	' ', 20(I3,',')/ &
	1592	' ', 20(I3,',')/ &
	1593	' ', 20(I3,',')/ &
	1594	' ', 19(I3,','),I3,'.'/ &
[1]	1595	' height levels selected for standard plot:'/ &
[189]	1596	' k = ', 20(I3,',')/ &
	1597	' ', 20(I3,',')/ &
	1598	' ', 20(I3,',')/ &
	1599	' ', 20(I3,',')/ &
	1600	' ', 19(I3,','),I3,'.'/ &
[1]	1601	' Time averaged over ', F7.1, ' s,' / &
	1602	' Profiles for the time averaging are taken every ', &
	1603	F6.1,' s')
	1604	#endif
	1605	400 FORMAT (//' Physical quantities:'/ &
	1606	' -------------------'/)
	1607	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1608	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1609	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1610	' f* = ',F9.6,' 1/s')
	1611	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1612	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1613	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1614	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1615	' ------------------------'/)
[57]	1616	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1617	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1618	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1619	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1620	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1621	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1622	' Height: ',A,' m'/ &
	1623	' Temperature: ',A,' K'/ &
	1624	' Gradient: ',A,' K/100m'/ &
	1625	' Gridpoint: ',A)
	1626	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1627	' Height: ',A,' m'/ &
	1628	' Humidity: ',A,' kg/kg'/ &
	1629	' Gradient: ',A,' (kg/kg)/100m'/ &
	1630	' Gridpoint: ',A)
	1631	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1632	' Height: ',A,' m'/ &
	1633	' Scalar concentration: ',A,' kg/m**3'/ &
	1634	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1635	' Gridpoint: ',A)
	1636	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1637	' Height: ',A,' m'/ &
	1638	' ug: ',A,' m/s'/ &
	1639	' Gradient: ',A,' 1/100s'/ &
	1640	' Gridpoint: ',A)
	1641	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1642	' Height: ',A,' m'/ &
[97]	1643	' vg: ',A,' m/s'/ &
[1]	1644	' Gradient: ',A,' 1/100s'/ &
	1645	' Gridpoint: ',A)
[97]	1646	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1647	' Height: ',A,' m'/ &
	1648	' Salinity: ',A,' psu'/ &
	1649	' Gradient: ',A,' psu/100m'/ &
	1650	' Gridpoint: ',A)
[1]	1651	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1652	' ---------------------------'/)
	1653	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1654	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1655	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1656	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1657	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1658	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1659	470 FORMAT (//' Actions during the simulation:'/ &
	1660	' -----------------------------'/)
[94]	1661	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1662	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1663	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1664	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1665	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1666	' to i/j =',I4)
	1667	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1668	1X,F5.3, ' m2/s2')
	1669	474 FORMAT (' Random number generator used : ',A/)
	1670	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1671	'respectively, if'/ &
	1672	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1673	' 3D-simulation'/)
	1674	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1675	'respectively, if the'/ &
	1676	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1677	' the 3D-simulation'/)
	1678	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1679	'respectively, if the'/ &
	1680	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1681	' the 3D-simulation'/)
	1682	480 FORMAT (' Particles:'/ &
	1683	' ---------'// &
	1684	' Particle advection is active (switched on at t = ', F7.1, &
	1685	' s)'/ &
	1686	' Start of new particle generations every ',F6.1,' s'/ &
	1687	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1688	' bottom: ', A, ' top: ', A/&
	1689	' Maximum particle age: ',F9.1,' s'/ &
[117]	1690	' Advection stopped at t = ',F9.1,' s'/ &
	1691	' Particles are sorted every ',F9.1,' s'/)
[1]	1692	481 FORMAT (' Particles have random start positions'/)
	1693	482 FORMAT (' Particles are advected only horizontally'/)
	1694	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1695	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1696	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1697	' Maximum age of the end of the tail: ',F8.2,' s')
	1698	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1699	486 FORMAT (' Particle statistics are written on file'/)
	1700	487 FORMAT (' Number of particle groups: ',I2/)
	1701	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1702	' minimum timestep for advection: ', F7.5/)
	1703	489 FORMAT (' Number of particles simultaneously released at each ', &
	1704	'point: ', I5/)
	1705	490 FORMAT (' Particle group ',I2,':'/ &
	1706	' Particle radius: ',E10.3, 'm')
	1707	491 FORMAT (' Particle inertia is activated'/ &
	1708	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1709	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1710	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1711	' y:',F8.1,' - ',F8.1,' m'/&
	1712	' z:',F8.1,' - ',F8.1,' m'/&
	1713	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1714	' m dz = ',F8.1,' m'/)
	1715	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1716	F8.2,' s'/)
	1717	495 FORMAT (' Number of particles in total domain: ',I10/)
	1718	500 FORMAT (//' 1D-Model parameters:'/ &
	1719	' -------------------'// &
	1720	' Simulation time: ',F8.1,' s'/ &
	1721	' Run-controll output every: ',F8.1,' s'/ &
	1722	' Vertical profile output every: ',F8.1,' s'/ &
	1723	' Mixing length calculation: ',A/ &
	1724	' Dissipation calculation: ',A/)
	1725	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1726
	1727
	1728	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |