Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 251

Last change on this file since 251 was 241, checked in by letzel, 16 years ago
Option to predefine a target bulk velocity for conserve_volume_flow
Property svn:keywords set to `Id`
File size: 65.5 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[237]	6	! Output of cluster_size
[240]	7	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	8	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	9	! dp_smooth, dpdxy, u_bulk, v_bulk
[1]	10	!
	11	! Former revisions:
	12	! -----------------
[3]	13	! $Id: header.f90 241 2009-02-19 16:08:56Z raasch $
[39]	14	!
[226]	15	! 206 2008-10-13 14:59:11Z raasch
	16	! Bugfix: error in zu index in case of section_xy = -1
	17	!
[200]	18	! 198 2008-09-17 08:55:28Z raasch
	19	! Format adjustments allowing output of larger revision numbers
	20	!
[198]	21	! 197 2008-09-16 15:29:03Z raasch
	22	! allow 100 spectra levels instead of 10 for consistency with
	23	! define_netcdf_header,
	24	! bugfix in the output of the characteristic levels of potential temperature,
	25	! geostrophic wind, scalar concentration, humidity and leaf area density,
	26	! output of turbulence recycling informations
	27	!
[139]	28	! 138 2007-11-28 10:03:58Z letzel
	29	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	30	! Allow two instead of one digit to specify isosurface and slicer variables.
	31	! Output of sorting frequency of particles
	32	!
[110]	33	! 108 2007-08-24 15:10:38Z letzel
	34	! Output of informations for coupled model runs (boundary conditions etc.)
	35	! + output of momentumfluxes at the top boundary
	36	! Rayleigh damping for ocean, e_init
	37	!
[98]	38	! 97 2007-06-21 08:23:15Z raasch
	39	! Adjustments for the ocean version.
	40	! use_pt_reference renamed use_reference
	41	!
[90]	42	! 87 2007-05-22 15:46:47Z raasch
	43	! Bugfix: output of use_upstream_for_tke
	44	!
[83]	45	! 82 2007-04-16 15:40:52Z raasch
	46	! Preprocessor strings for different linux clusters changed to "lc",
	47	! routine local_flush is used for buffer flushing
	48	!
[77]	49	! 76 2007-03-29 00:58:32Z raasch
	50	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	51	! output of the loop optimization method, moisture renamed humidity,
	52	! output of subversion revision number
	53	!
[39]	54	! 19 2007-02-23 04:53:48Z raasch
	55	! Output of scalar flux applied at top boundary
	56	!
[3]	57	! RCS Log replace by Id keyword, revision history cleaned up
	58	!
[1]	59	! Revision 1.63 2006/08/22 13:53:13 raasch
	60	! Output of dz_max
	61	!
	62	! Revision 1.1 1997/08/11 06:17:20 raasch
	63	! Initial revision
	64	!
	65	!
	66	! Description:
	67	! ------------
	68	! Writing a header with all important informations about the actual run.
	69	! This subroutine is called three times, two times at the beginning
	70	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	71	! end of the run, then writing additional information about CPU-usage on file
	72	! header.
	73	!------------------------------------------------------------------------------!
	74
	75	USE arrays_3d
	76	USE control_parameters
	77	USE cloud_parameters
	78	USE cpulog
	79	USE dvrp_variables
	80	USE grid_variables
	81	USE indices
	82	USE model_1d
	83	USE particle_attributes
	84	USE pegrid
	85	USE spectrum
	86
	87	IMPLICIT NONE
	88
	89	CHARACTER (LEN=1) :: prec
	90	CHARACTER (LEN=2) :: do2d_mode
	91	CHARACTER (LEN=5) :: section_chr
	92	CHARACTER (LEN=9) :: time_to_string
	93	CHARACTER (LEN=10) :: coor_chr, host_chr
	94	CHARACTER (LEN=16) :: begin_chr
[200]	95	CHARACTER (LEN=23) :: ver_rev
[1]	96	CHARACTER (LEN=40) :: output_format
[167]	97	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	98	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	99	run_classification
	100	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	101	temperatures, ugcomponent, vgcomponent
[1]	102	CHARACTER (LEN=85) :: roben, runten
	103
[240]	104	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
	105	cyn, cys, i, ihost, io, j, l, ll
[1]	106	REAL :: cpuseconds_per_simulated_second
	107
	108	!
	109	!-- Open the output file. At the end of the simulation, output is directed
	110	!-- to unit 19.
	111	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	112	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	113	io = 15 ! header output on file RUN_CONTROL
	114	ELSE
	115	io = 19 ! header output on file HEADER
	116	ENDIF
	117	CALL check_open( io )
	118
	119	!
	120	!-- At the end of the run, output file (HEADER) will be rewritten with
	121	!-- new informations
	122	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	123
	124	!
	125	!-- Determine kind of model run
	126	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	127	run_classification = '3D - restart run'
[147]	128	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	129	run_classification = '3D - run using 3D - prerun data'
	130	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	131	run_classification = '3D - run without 1D - prerun'
[197]	132	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	133	run_classification = '3D - run with 1D - prerun'
[197]	134	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	135	run_classification = '3D - run initialized by user'
[1]	136	ELSE
[147]	137	PRINT*,'+++ header: unknown action(s): ',initializing_actions
[1]	138	ENDIF
[97]	139	IF ( ocean ) THEN
	140	run_classification = 'ocean - ' // run_classification
	141	ELSE
	142	run_classification = 'atmosphere - ' // run_classification
	143	ENDIF
[1]	144
	145	!
	146	!-- Run-identification, date, time, host
	147	host_chr = host(1:10)
[75]	148	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	149	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	150	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	151	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	152	ADJUSTR( host_chr )
[1]	153	#if defined( __parallel )
	154	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	155	char1 = 'calculated'
	156	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	157	host(1:2) == 'lc' ) .AND. &
	158	npex == -1 .AND. pdims(2) == 1 ) THEN
	159	char1 = 'forced'
	160	ELSE
	161	char1 = 'predefined'
	162	ENDIF
	163	IF ( threads_per_task == 1 ) THEN
[102]	164	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	165	ELSE
[102]	166	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	167	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	168	ENDIF
	169	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	170	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	171	npex == -1 .AND. pdims(2) == 1 ) &
	172	THEN
[102]	173	WRITE ( io, 106 )
[1]	174	ELSEIF ( pdims(2) == 1 ) THEN
[102]	175	WRITE ( io, 107 ) 'x'
[1]	176	ELSEIF ( pdims(1) == 1 ) THEN
[102]	177	WRITE ( io, 107 ) 'y'
[1]	178	ENDIF
[102]	179	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	180	#endif
	181	WRITE ( io, 99 )
	182
	183	!
	184	!-- Numerical schemes
	185	WRITE ( io, 110 )
	186	IF ( psolver(1:7) == 'poisfft' ) THEN
	187	WRITE ( io, 111 ) TRIM( fft_method )
	188	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	189	ELSEIF ( psolver == 'sor' ) THEN
	190	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	191	ELSEIF ( psolver == 'multigrid' ) THEN
	192	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	193	IF ( mg_cycles == -1 ) THEN
	194	WRITE ( io, 140 ) residual_limit
	195	ELSE
	196	WRITE ( io, 141 ) mg_cycles
	197	ENDIF
	198	IF ( mg_switch_to_pe0_level == 0 ) THEN
	199	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	200	nzt_mg(1)
[197]	201	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	202	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	203	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	204	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	205	nzt_mg(mg_switch_to_pe0_level), &
	206	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	207	nzt_mg(1)
	208	ENDIF
	209	ENDIF
	210	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	211	THEN
	212	WRITE ( io, 142 )
	213	ENDIF
	214
	215	IF ( momentum_advec == 'pw-scheme' ) THEN
	216	WRITE ( io, 113 )
	217	ELSE
	218	WRITE ( io, 114 )
	219	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	220	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	221	overshoot_limit_w /= 0.0 ) THEN
	222	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	223	overshoot_limit_w
	224	ENDIF
	225	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	226	ups_limit_w /= 0.0 ) &
	227	THEN
	228	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	229	ENDIF
	230	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	231	ENDIF
	232	IF ( scalar_advec == 'pw-scheme' ) THEN
	233	WRITE ( io, 116 )
	234	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	235	WRITE ( io, 117 )
	236	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	237	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	238	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	239	ENDIF
	240	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	241	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	242	ENDIF
	243	ELSE
	244	WRITE ( io, 118 )
	245	ENDIF
[63]	246
	247	WRITE ( io, 139 ) TRIM( loop_optimization )
	248
[1]	249	IF ( galilei_transformation ) THEN
	250	IF ( use_ug_for_galilei_tr ) THEN
	251	char1 = 'geostrophic wind'
	252	ELSE
	253	char1 = 'mean wind in model domain'
	254	ENDIF
	255	IF ( simulated_time_at_begin == simulated_time ) THEN
	256	char2 = 'at the start of the run'
	257	ELSE
	258	char2 = 'at the end of the run'
	259	ENDIF
	260	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	261	advected_distance_x/1000.0, advected_distance_y/1000.0
	262	ENDIF
	263	IF ( timestep_scheme == 'leapfrog' ) THEN
	264	WRITE ( io, 120 )
	265	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	266	WRITE ( io, 121 )
	267	ELSE
	268	WRITE ( io, 122 ) timestep_scheme
	269	ENDIF
[87]	270	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	271	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	272	IF ( .NOT. ocean ) THEN
	273	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	274	rayleigh_damping_factor
	275	ELSE
	276	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	277	rayleigh_damping_factor
	278	ENDIF
[1]	279	ENDIF
[75]	280	IF ( humidity ) THEN
[1]	281	IF ( .NOT. cloud_physics ) THEN
	282	WRITE ( io, 129 )
	283	ELSE
	284	WRITE ( io, 130 )
	285	WRITE ( io, 131 )
	286	IF ( radiation ) WRITE ( io, 132 )
	287	IF ( precipitation ) WRITE ( io, 133 )
	288	ENDIF
	289	ENDIF
	290	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	291	IF ( conserve_volume_flow ) THEN
[241]	292	WRITE ( io, 150 ) conserve_volume_flow_mode
	293	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	294	WRITE ( io, 151 ) u_bulk, v_bulk
	295	ENDIF
[240]	296	ELSEIF ( dp_external ) THEN
	297	IF ( dp_smooth ) THEN
[241]	298	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	299	ELSE
[241]	300	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	301	ENDIF
	302	ENDIF
[1]	303	WRITE ( io, 99 )
	304
	305	!
	306	!-- Runtime and timestep informations
	307	WRITE ( io, 200 )
	308	IF ( .NOT. dt_fixed ) THEN
	309	WRITE ( io, 201 ) dt_max, cfl_factor
	310	ELSE
	311	WRITE ( io, 202 ) dt
	312	ENDIF
	313	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	314
	315	IF ( time_restart /= 9999999.9 .AND. &
	316	simulated_time_at_begin == simulated_time ) THEN
	317	IF ( dt_restart == 9999999.9 ) THEN
	318	WRITE ( io, 204 ) ' Restart at: ',time_restart
	319	ELSE
	320	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	321	ENDIF
	322	ENDIF
	323
	324	IF ( simulated_time_at_begin /= simulated_time ) THEN
	325	i = MAX ( log_point_s(10)%counts, 1 )
	326	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	327	cpuseconds_per_simulated_second = 0.0
	328	ELSE
	329	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	330	( simulated_time - &
	331	simulated_time_at_begin )
	332	ENDIF
	333	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	334	log_point_s(10)%sum / REAL( i ), &
	335	cpuseconds_per_simulated_second
	336	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	337	IF ( dt_restart == 9999999.9 ) THEN
	338	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	339	ELSE
	340	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	341	ENDIF
	342	ENDIF
	343	ENDIF
	344
	345	!
	346	!-- Computational grid
[94]	347	IF ( .NOT. ocean ) THEN
	348	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	349	IF ( dz_stretch_level_index < nzt+1 ) THEN
	350	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	351	dz_stretch_factor, dz_max
	352	ENDIF
	353	ELSE
	354	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	355	IF ( dz_stretch_level_index > 0 ) THEN
	356	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	357	dz_stretch_factor, dz_max
	358	ENDIF
[1]	359	ENDIF
	360	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	361	MIN( nnz+2, nzt+2 )
[76]	362	IF ( numprocs > 1 ) THEN
	363	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	364	WRITE ( io, 255 )
	365	ELSE
	366	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	367	ENDIF
[1]	368	ENDIF
	369	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	370
	371	!
	372	!-- Topography
	373	WRITE ( io, 270 ) topography
	374	SELECT CASE ( TRIM( topography ) )
	375
	376	CASE ( 'flat' )
	377	! no actions necessary
	378
	379	CASE ( 'single_building' )
	380	blx = INT( building_length_x / dx )
	381	bly = INT( building_length_y / dy )
	382	bh = INT( building_height / dz )
	383
	384	IF ( building_wall_left == 9999999.9 ) THEN
	385	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	386	ENDIF
	387	bxl = INT ( building_wall_left / dx + 0.5 )
	388	bxr = bxl + blx
	389
	390	IF ( building_wall_south == 9999999.9 ) THEN
	391	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	392	ENDIF
	393	bys = INT ( building_wall_south / dy + 0.5 )
	394	byn = bys + bly
	395
	396	WRITE ( io, 271 ) building_length_x, building_length_y, &
	397	building_height, bxl, bxr, bys, byn
	398
[240]	399	CASE ( 'single_street_canyon' )
	400	ch = NINT( canyon_height / dz )
	401	IF ( canyon_width_x /= 9999999.9 ) THEN
	402	!
	403	!-- Street canyon in y direction
	404	cwx = NINT( canyon_width_x / dx )
	405	IF ( canyon_wall_left == 9999999.9 ) THEN
	406	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	407	ENDIF
	408	cxl = NINT( canyon_wall_left / dx )
	409	cxr = cxl + cwx
	410	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	411
	412	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	413	!
	414	!-- Street canyon in x direction
	415	cwy = NINT( canyon_width_y / dy )
	416	IF ( canyon_wall_south == 9999999.9 ) THEN
	417	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	418	ENDIF
	419	cys = NINT( canyon_wall_south / dy )
	420	cyn = cys + cwy
	421	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	422	ENDIF
	423
[1]	424	END SELECT
	425
[138]	426	IF ( plant_canopy ) THEN
	427
	428	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	429	IF ( passive_scalar ) THEN
	430	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	431	leaf_surface_concentration
	432	ENDIF
[138]	433
[1]	434	!
[153]	435	!-- Heat flux at the top of vegetation
	436	WRITE ( io, 282 ) cthf
	437
	438	!
[138]	439	!-- Leaf area density profile
	440	!-- Building output strings, starting with surface value
	441	WRITE ( learde, '(F6.2)' ) lad_surface
	442	gradients = '------'
	443	slices = ' 0'
	444	coordinates = ' 0.0'
	445	i = 1
	446	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	447
	448	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	449	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	450
	451	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	452	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	453
	454	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	455	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	456
	457	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	458	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	459
	460	i = i + 1
	461	ENDDO
	462
[153]	463	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	464	TRIM( gradients ), TRIM( slices )
	465
	466	ENDIF
	467
	468	!
[1]	469	!-- Boundary conditions
	470	IF ( ibc_p_b == 0 ) THEN
	471	runten = 'p(0) = 0 \|'
	472	ELSEIF ( ibc_p_b == 1 ) THEN
	473	runten = 'p(0) = p(1) \|'
	474	ELSE
	475	runten = 'p(0) = p(1) +R\|'
	476	ENDIF
	477	IF ( ibc_p_t == 0 ) THEN
	478	roben = 'p(nzt+1) = 0 \|'
	479	ELSE
	480	roben = 'p(nzt+1) = p(nzt) \|'
	481	ENDIF
	482
	483	IF ( ibc_uv_b == 0 ) THEN
	484	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	485	ELSE
	486	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	487	ENDIF
[132]	488	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	489	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	490	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	491	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	492	ELSE
	493	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	494	ENDIF
	495
	496	IF ( ibc_pt_b == 0 ) THEN
	497	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	498	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	499	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	500	ELSEIF ( ibc_pt_b == 2 ) THEN
	501	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	502	ENDIF
	503	IF ( ibc_pt_t == 0 ) THEN
[19]	504	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	505	ELSEIF( ibc_pt_t == 1 ) THEN
	506	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	507	ELSEIF( ibc_pt_t == 2 ) THEN
	508	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	509	ENDIF
	510
	511	WRITE ( io, 300 ) runten, roben
	512
	513	IF ( .NOT. constant_diffusion ) THEN
	514	IF ( ibc_e_b == 1 ) THEN
	515	runten = 'e(0) = e(1)'
	516	ELSE
	517	runten = 'e(0) = e(1) = (u/0.1)*2'
	518	ENDIF
	519	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	520
[97]	521	WRITE ( io, 301 ) 'e', runten, roben
[1]	522
	523	ENDIF
	524
[97]	525	IF ( ocean ) THEN
	526	runten = 'sa(0) = sa(1)'
	527	IF ( ibc_sa_t == 0 ) THEN
	528	roben = 'sa(nzt+1) = sa_surface'
[1]	529	ELSE
[97]	530	roben = 'sa(nzt+1) = sa(nzt)'
[1]	531	ENDIF
[97]	532	WRITE ( io, 301 ) 'sa', runten, roben
	533	ENDIF
[1]	534
[97]	535	IF ( humidity ) THEN
	536	IF ( ibc_q_b == 0 ) THEN
	537	runten = 'q(0) = q_surface'
	538	ELSE
	539	runten = 'q(0) = q(1)'
	540	ENDIF
	541	IF ( ibc_q_t == 0 ) THEN
	542	roben = 'q(nzt) = q_top'
	543	ELSE
	544	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	545	ENDIF
	546	WRITE ( io, 301 ) 'q', runten, roben
	547	ENDIF
[1]	548
[97]	549	IF ( passive_scalar ) THEN
	550	IF ( ibc_q_b == 0 ) THEN
	551	runten = 's(0) = s_surface'
	552	ELSE
	553	runten = 's(0) = s(1)'
	554	ENDIF
	555	IF ( ibc_q_t == 0 ) THEN
	556	roben = 's(nzt) = s_top'
	557	ELSE
	558	roben = 's(nzt) = s(nzt-1) + ds/dz'
	559	ENDIF
	560	WRITE ( io, 301 ) 's', runten, roben
[1]	561	ENDIF
	562
	563	IF ( use_surface_fluxes ) THEN
	564	WRITE ( io, 303 )
	565	IF ( constant_heatflux ) THEN
	566	WRITE ( io, 306 ) surface_heatflux
	567	IF ( random_heatflux ) WRITE ( io, 307 )
	568	ENDIF
[75]	569	IF ( humidity .AND. constant_waterflux ) THEN
[1]	570	WRITE ( io, 311 ) surface_waterflux
	571	ENDIF
	572	IF ( passive_scalar .AND. constant_waterflux ) THEN
	573	WRITE ( io, 313 ) surface_waterflux
	574	ENDIF
	575	ENDIF
	576
[19]	577	IF ( use_top_fluxes ) THEN
	578	WRITE ( io, 304 )
[102]	579	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	580	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	581	IF ( constant_top_heatflux ) THEN
	582	WRITE ( io, 306 ) top_heatflux
	583	ENDIF
	584	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	585	WRITE ( io, 316 )
[19]	586	ENDIF
[97]	587	IF ( ocean .AND. constant_top_salinityflux ) THEN
	588	WRITE ( io, 309 ) top_salinityflux
	589	ENDIF
[75]	590	IF ( humidity .OR. passive_scalar ) THEN
[19]	591	WRITE ( io, 315 )
	592	ENDIF
	593	ENDIF
	594
[1]	595	IF ( prandtl_layer ) THEN
[94]	596	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	597	rif_min, rif_max
[1]	598	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	599	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	600	WRITE ( io, 312 )
	601	ENDIF
	602	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	603	WRITE ( io, 314 )
	604	ENDIF
	605	ELSE
	606	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	607	WRITE ( io, 310 ) rif_min, rif_max
	608	ENDIF
	609	ENDIF
	610
	611	WRITE ( io, 317 ) bc_lr, bc_ns
	612	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	613	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	614	IF ( turbulent_inflow ) THEN
	615	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	616	inflow_damping_height, inflow_damping_width
	617	ENDIF
[1]	618	ENDIF
	619
	620	!
	621	!-- Listing of 1D-profiles
[151]	622	WRITE ( io, 325 ) dt_dopr_listing
[1]	623	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	624	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	625	ENDIF
	626
	627	!
	628	!-- DATA output
	629	WRITE ( io, 330 )
	630	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	631	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	632	ENDIF
	633
	634	!
	635	!-- 1D-profiles
	636	dopr_chr = 'Profile:'
	637	IF ( dopr_n /= 0 ) THEN
	638	WRITE ( io, 331 )
	639
	640	output_format = ''
	641	IF ( netcdf_output ) THEN
	642	IF ( netcdf_64bit ) THEN
	643	output_format = 'netcdf (64 bit offset)'
	644	ELSE
	645	output_format = 'netcdf'
	646	ENDIF
	647	ENDIF
	648	IF ( profil_output ) THEN
	649	IF ( netcdf_output ) THEN
	650	output_format = TRIM( output_format ) // ' and profil'
	651	ELSE
	652	output_format = 'profil'
	653	ENDIF
	654	ENDIF
	655	WRITE ( io, 345 ) output_format
	656
	657	DO i = 1, dopr_n
	658	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	659	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	660	WRITE ( io, 332 ) dopr_chr
	661	dopr_chr = ' :'
	662	ENDIF
	663	ENDDO
	664
	665	IF ( dopr_chr /= '' ) THEN
	666	WRITE ( io, 332 ) dopr_chr
	667	ENDIF
	668	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	669	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	670	ENDIF
	671
	672	!
	673	!-- 2D-arrays
	674	DO av = 0, 1
	675
	676	i = 1
	677	do2d_xy = ''
	678	do2d_xz = ''
	679	do2d_yz = ''
	680	DO WHILE ( do2d(av,i) /= ' ' )
	681
	682	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	683	do2d_mode = do2d(av,i)(l-1:l)
	684
	685	SELECT CASE ( do2d_mode )
	686	CASE ( 'xy' )
	687	ll = LEN_TRIM( do2d_xy )
	688	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	689	CASE ( 'xz' )
	690	ll = LEN_TRIM( do2d_xz )
	691	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	692	CASE ( 'yz' )
	693	ll = LEN_TRIM( do2d_yz )
	694	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	695	END SELECT
	696
	697	i = i + 1
	698
	699	ENDDO
	700
	701	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	702	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	703	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	704	( netcdf_output .OR. iso2d_output ) ) THEN
	705
	706	IF ( av == 0 ) THEN
	707	WRITE ( io, 334 ) ''
	708	ELSE
	709	WRITE ( io, 334 ) '(time-averaged)'
	710	ENDIF
	711
	712	IF ( do2d_at_begin ) THEN
	713	begin_chr = 'and at the start'
	714	ELSE
	715	begin_chr = ''
	716	ENDIF
	717
	718	output_format = ''
	719	IF ( netcdf_output ) THEN
	720	IF ( netcdf_64bit ) THEN
	721	output_format = 'netcdf (64 bit offset)'
	722	ELSE
	723	output_format = 'netcdf'
	724	ENDIF
	725	ENDIF
	726	IF ( iso2d_output ) THEN
	727	IF ( netcdf_output ) THEN
	728	output_format = TRIM( output_format ) // ' and iso2d'
	729	ELSE
	730	output_format = 'iso2d'
	731	ENDIF
	732	ENDIF
	733	WRITE ( io, 345 ) output_format
	734
	735	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	736	i = 1
	737	slices = '/'
	738	coordinates = '/'
	739	!
	740	!-- Building strings with index and coordinate informations of the
	741	!-- slices
	742	DO WHILE ( section(i,1) /= -9999 )
	743
	744	WRITE (section_chr,'(I5)') section(i,1)
	745	section_chr = ADJUSTL( section_chr )
	746	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	747
[206]	748	IF ( section(i,1) == -1 ) THEN
	749	WRITE (coor_chr,'(F10.1)') -1.0
	750	ELSE
	751	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	752	ENDIF
[1]	753	coor_chr = ADJUSTL( coor_chr )
	754	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	755
	756	i = i + 1
	757	ENDDO
	758	IF ( av == 0 ) THEN
	759	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	760	TRIM( begin_chr ), 'k', TRIM( slices ), &
	761	TRIM( coordinates )
	762	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	763	WRITE ( io, 339 ) skip_time_do2d_xy
	764	ENDIF
	765	ELSE
	766	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	767	TRIM( begin_chr ), averaging_interval, &
	768	dt_averaging_input, 'k', TRIM( slices ), &
	769	TRIM( coordinates )
	770	IF ( skip_time_data_output_av /= 0.0 ) THEN
	771	WRITE ( io, 339 ) skip_time_data_output_av
	772	ENDIF
	773	ENDIF
	774
	775	ENDIF
	776
	777	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	778	i = 1
	779	slices = '/'
	780	coordinates = '/'
	781	!
	782	!-- Building strings with index and coordinate informations of the
	783	!-- slices
	784	DO WHILE ( section(i,2) /= -9999 )
	785
	786	WRITE (section_chr,'(I5)') section(i,2)
	787	section_chr = ADJUSTL( section_chr )
	788	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	789
	790	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	791	coor_chr = ADJUSTL( coor_chr )
	792	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	793
	794	i = i + 1
	795	ENDDO
	796	IF ( av == 0 ) THEN
	797	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	798	TRIM( begin_chr ), 'j', TRIM( slices ), &
	799	TRIM( coordinates )
	800	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	801	WRITE ( io, 339 ) skip_time_do2d_xz
	802	ENDIF
	803	ELSE
	804	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	805	TRIM( begin_chr ), averaging_interval, &
	806	dt_averaging_input, 'j', TRIM( slices ), &
	807	TRIM( coordinates )
	808	IF ( skip_time_data_output_av /= 0.0 ) THEN
	809	WRITE ( io, 339 ) skip_time_data_output_av
	810	ENDIF
	811	ENDIF
	812	ENDIF
	813
	814	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	815	i = 1
	816	slices = '/'
	817	coordinates = '/'
	818	!
	819	!-- Building strings with index and coordinate informations of the
	820	!-- slices
	821	DO WHILE ( section(i,3) /= -9999 )
	822
	823	WRITE (section_chr,'(I5)') section(i,3)
	824	section_chr = ADJUSTL( section_chr )
	825	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	826
	827	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	828	coor_chr = ADJUSTL( coor_chr )
	829	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	830
	831	i = i + 1
	832	ENDDO
	833	IF ( av == 0 ) THEN
	834	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	835	TRIM( begin_chr ), 'i', TRIM( slices ), &
	836	TRIM( coordinates )
	837	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	838	WRITE ( io, 339 ) skip_time_do2d_yz
	839	ENDIF
	840	ELSE
	841	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	842	TRIM( begin_chr ), averaging_interval, &
	843	dt_averaging_input, 'i', TRIM( slices ), &
	844	TRIM( coordinates )
	845	IF ( skip_time_data_output_av /= 0.0 ) THEN
	846	WRITE ( io, 339 ) skip_time_data_output_av
	847	ENDIF
	848	ENDIF
	849	ENDIF
	850
	851	ENDIF
	852
	853	ENDDO
	854
	855	!
	856	!-- 3d-arrays
	857	DO av = 0, 1
	858
	859	i = 1
	860	do3d_chr = ''
	861	DO WHILE ( do3d(av,i) /= ' ' )
	862
	863	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	864	i = i + 1
	865
	866	ENDDO
	867
	868	IF ( do3d_chr /= '' ) THEN
	869	IF ( av == 0 ) THEN
	870	WRITE ( io, 336 ) ''
	871	ELSE
	872	WRITE ( io, 336 ) '(time-averaged)'
	873	ENDIF
	874
	875	output_format = ''
	876	IF ( netcdf_output ) THEN
[46]	877	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	878	output_format = 'netcdf (64 bit offset)'
	879	ELSE
	880	output_format = 'netcdf'
	881	ENDIF
	882	ENDIF
	883	IF ( avs_output ) THEN
	884	IF ( netcdf_output ) THEN
	885	output_format = TRIM( output_format ) // ' and avs'
	886	ELSE
	887	output_format = 'avs'
	888	ENDIF
	889	ENDIF
	890	WRITE ( io, 345 ) output_format
	891
	892	IF ( do3d_at_begin ) THEN
	893	begin_chr = 'and at the start'
	894	ELSE
	895	begin_chr = ''
	896	ENDIF
	897	IF ( av == 0 ) THEN
	898	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	899	zu(nz_do3d), nz_do3d
	900	ELSE
	901	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	902	TRIM( begin_chr ), averaging_interval, &
	903	dt_averaging_input, zu(nz_do3d), nz_do3d
	904	ENDIF
	905
	906	IF ( do3d_compress ) THEN
	907	do3d_chr = ''
	908	i = 1
	909	DO WHILE ( do3d(av,i) /= ' ' )
	910
	911	SELECT CASE ( do3d(av,i) )
	912	CASE ( 'u' )
	913	j = 1
	914	CASE ( 'v' )
	915	j = 2
	916	CASE ( 'w' )
	917	j = 3
	918	CASE ( 'p' )
	919	j = 4
	920	CASE ( 'pt' )
	921	j = 5
	922	END SELECT
	923	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	924	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	925	':' // prec // ','
	926	i = i + 1
	927
	928	ENDDO
	929	WRITE ( io, 338 ) do3d_chr
	930
	931	ENDIF
	932
	933	IF ( av == 0 ) THEN
	934	IF ( skip_time_do3d /= 0.0 ) THEN
	935	WRITE ( io, 339 ) skip_time_do3d
	936	ENDIF
	937	ELSE
	938	IF ( skip_time_data_output_av /= 0.0 ) THEN
	939	WRITE ( io, 339 ) skip_time_data_output_av
	940	ENDIF
	941	ENDIF
	942
	943	ENDIF
	944
	945	ENDDO
	946
	947	!
	948	!-- Timeseries
	949	IF ( dt_dots /= 9999999.9 ) THEN
	950	WRITE ( io, 340 )
	951
	952	output_format = ''
	953	IF ( netcdf_output ) THEN
	954	IF ( netcdf_64bit ) THEN
	955	output_format = 'netcdf (64 bit offset)'
	956	ELSE
	957	output_format = 'netcdf'
	958	ENDIF
	959	ENDIF
	960	IF ( profil_output ) THEN
	961	IF ( netcdf_output ) THEN
	962	output_format = TRIM( output_format ) // ' and profil'
	963	ELSE
	964	output_format = 'profil'
	965	ENDIF
	966	ENDIF
	967	WRITE ( io, 345 ) output_format
	968	WRITE ( io, 341 ) dt_dots
	969	ENDIF
	970
	971	#if defined( __dvrp_graphics )
	972	!
	973	!-- Dvrp-output
	974	IF ( dt_dvrp /= 9999999.9 ) THEN
	975	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	976	TRIM( dvrp_username ), TRIM( dvrp_directory )
	977	i = 1
	978	l = 0
	979	DO WHILE ( mode_dvrp(i) /= ' ' )
	980	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	981	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	982	l = l + 1
	983	IF ( do3d(0,j) /= ' ' ) THEN
	984	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	985	ENDIF
	986	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	987	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	988	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	989	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	990	WRITE ( io, 363 )
	991	ENDIF
	992	i = i + 1
	993	ENDDO
[237]	994
	995	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
	996	WRITE ( io, 364 ) cluster_size
	997	ENDIF
	998
[1]	999	ENDIF
	1000	#endif
	1001
	1002	#if defined( __spectra )
	1003	!
	1004	!-- Spectra output
	1005	IF ( dt_dosp /= 9999999.9 ) THEN
	1006	WRITE ( io, 370 )
	1007
	1008	output_format = ''
	1009	IF ( netcdf_output ) THEN
	1010	IF ( netcdf_64bit ) THEN
	1011	output_format = 'netcdf (64 bit offset)'
	1012	ELSE
	1013	output_format = 'netcdf'
	1014	ENDIF
	1015	ENDIF
	1016	IF ( profil_output ) THEN
	1017	IF ( netcdf_output ) THEN
	1018	output_format = TRIM( output_format ) // ' and profil'
	1019	ELSE
	1020	output_format = 'profil'
	1021	ENDIF
	1022	ENDIF
	1023	WRITE ( io, 345 ) output_format
	1024	WRITE ( io, 371 ) dt_dosp
	1025	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1026	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1027	( spectra_direction(i), i = 1,10 ), &
[189]	1028	( comp_spectra_level(i), i = 1,100 ), &
	1029	( plot_spectra_level(i), i = 1,100 ), &
[1]	1030	averaging_interval_sp, dt_averaging_input_pr
	1031	ENDIF
	1032	#endif
	1033
	1034	WRITE ( io, 99 )
	1035
	1036	!
	1037	!-- Physical quantities
	1038	WRITE ( io, 400 )
	1039
	1040	!
	1041	!-- Geostrophic parameters
	1042	WRITE ( io, 410 ) omega, phi, f, fs
	1043
	1044	!
	1045	!-- Other quantities
	1046	WRITE ( io, 411 ) g
[97]	1047	IF ( use_reference ) THEN
	1048	IF ( ocean ) THEN
	1049	WRITE ( io, 412 ) prho_reference
	1050	ELSE
	1051	WRITE ( io, 413 ) pt_reference
	1052	ENDIF
	1053	ENDIF
[1]	1054
	1055	!
	1056	!-- Cloud physics parameters
	1057	IF ( cloud_physics ) THEN
[57]	1058	WRITE ( io, 415 )
	1059	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1060	ENDIF
	1061
	1062	!-- Profile of the geostrophic wind (component ug)
	1063	!-- Building output strings
	1064	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1065	gradients = '------'
	1066	slices = ' 0'
	1067	coordinates = ' 0.0'
	1068	i = 1
	1069	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1070
[167]	1071	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1072	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1073
[167]	1074	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1075	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1076
[167]	1077	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1078	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1079
[167]	1080	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1081	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1082
	1083	i = i + 1
	1084	ENDDO
	1085
	1086	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1087	TRIM( gradients ), TRIM( slices )
	1088
	1089	!-- Profile of the geostrophic wind (component vg)
	1090	!-- Building output strings
	1091	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1092	gradients = '------'
	1093	slices = ' 0'
	1094	coordinates = ' 0.0'
	1095	i = 1
	1096	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1097
[167]	1098	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1099	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1100
[167]	1101	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1102	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1103
[167]	1104	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1105	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1106
[167]	1107	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1108	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1109
	1110	i = i + 1
	1111	ENDDO
	1112
	1113	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1114	TRIM( gradients ), TRIM( slices )
	1115
	1116	!
	1117	!-- Initial temperature profile
	1118	!-- Building output strings, starting with surface temperature
	1119	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1120	gradients = '------'
	1121	slices = ' 0'
	1122	coordinates = ' 0.0'
	1123	i = 1
	1124	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1125
[94]	1126	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1127	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1128
[94]	1129	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1130	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1131
[94]	1132	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1133	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1134
[94]	1135	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1136	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1137
	1138	i = i + 1
	1139	ENDDO
	1140
	1141	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1142	TRIM( gradients ), TRIM( slices )
	1143
	1144	!
	1145	!-- Initial humidity profile
	1146	!-- Building output strings, starting with surface humidity
[75]	1147	IF ( humidity .OR. passive_scalar ) THEN
[1]	1148	WRITE ( temperatures, '(E8.1)' ) q_surface
	1149	gradients = '--------'
	1150	slices = ' 0'
	1151	coordinates = ' 0.0'
	1152	i = 1
	1153	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1154
	1155	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1156	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1157
	1158	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1159	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1160
	1161	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1162	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1163
	1164	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1165	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1166
	1167	i = i + 1
	1168	ENDDO
	1169
[75]	1170	IF ( humidity ) THEN
[1]	1171	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1172	TRIM( gradients ), TRIM( slices )
	1173	ELSE
	1174	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1175	TRIM( gradients ), TRIM( slices )
	1176	ENDIF
	1177	ENDIF
	1178
	1179	!
[97]	1180	!-- Initial salinity profile
	1181	!-- Building output strings, starting with surface salinity
	1182	IF ( ocean ) THEN
	1183	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1184	gradients = '------'
	1185	slices = ' 0'
	1186	coordinates = ' 0.0'
	1187	i = 1
	1188	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1189
	1190	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1191	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1192
	1193	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1194	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1195
	1196	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1197	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1198
	1199	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1200	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1201
	1202	i = i + 1
	1203	ENDDO
	1204
	1205	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1206	TRIM( gradients ), TRIM( slices )
	1207	ENDIF
	1208
	1209	!
[1]	1210	!-- LES / turbulence parameters
	1211	WRITE ( io, 450 )
	1212
	1213	!--
	1214	! ... LES-constants used must still be added here
	1215	!--
	1216	IF ( constant_diffusion ) THEN
	1217	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1218	prandtl_number
	1219	ENDIF
	1220	IF ( .NOT. constant_diffusion) THEN
[108]	1221	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1222	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1223	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1224	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1225	ENDIF
	1226
	1227	!
	1228	!-- Special actions during the run
	1229	WRITE ( io, 470 )
	1230	IF ( create_disturbances ) THEN
	1231	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1232	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1233	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1234	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1235	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1236	ELSE
	1237	WRITE ( io, 473 ) disturbance_energy_limit
	1238	ENDIF
	1239	WRITE ( io, 474 ) TRIM( random_generator )
	1240	ENDIF
	1241	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1242	WRITE ( io, 475 ) pt_surface_initial_change
	1243	ENDIF
[75]	1244	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1245	WRITE ( io, 476 ) q_surface_initial_change
	1246	ENDIF
	1247	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1248	WRITE ( io, 477 ) q_surface_initial_change
	1249	ENDIF
	1250
[60]	1251	IF ( particle_advection ) THEN
[1]	1252	!
[60]	1253	!-- Particle attributes
	1254	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1255	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1256	end_time_prel, dt_sort_particles
[60]	1257	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1258	IF ( random_start_position ) WRITE ( io, 481 )
	1259	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1260	WRITE ( io, 495 ) total_number_of_particles
	1261	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1262	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1263	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1264	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1265	WRITE ( io, 484 ) total_number_of_tails, &
	1266	minimum_tailpoint_distance, &
	1267	maximum_tailpoint_age
	1268	ENDIF
[1]	1269	ENDIF
[60]	1270	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1271	WRITE ( io, 485 ) dt_write_particle_data
	1272	output_format = ''
	1273	IF ( netcdf_output ) THEN
	1274	IF ( netcdf_64bit ) THEN
	1275	output_format = 'netcdf (64 bit offset) and binary'
	1276	ELSE
	1277	output_format = 'netcdf and binary'
	1278	ENDIF
[1]	1279	ELSE
[60]	1280	output_format = 'binary'
[1]	1281	ENDIF
[60]	1282	WRITE ( io, 345 ) output_format
[1]	1283	ENDIF
[60]	1284	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1285	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1286
[60]	1287	WRITE ( io, 487 ) number_of_particle_groups
[1]	1288
[60]	1289	DO i = 1, number_of_particle_groups
	1290	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1291	WRITE ( io, 490 ) i, 0.0
	1292	WRITE ( io, 492 )
[1]	1293	ELSE
[60]	1294	WRITE ( io, 490 ) i, radius(i)
	1295	IF ( density_ratio(i) /= 0.0 ) THEN
	1296	WRITE ( io, 491 ) density_ratio(i)
	1297	ELSE
	1298	WRITE ( io, 492 )
	1299	ENDIF
[1]	1300	ENDIF
[60]	1301	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1302	pdx(i), pdy(i), pdz(i)
	1303	ENDDO
[1]	1304
[60]	1305	ENDIF
[1]	1306
[60]	1307
[1]	1308	!
	1309	!-- Parameters of 1D-model
	1310	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1311	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1312	mixing_length_1d, dissipation_1d
	1313	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1314	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1315	ENDIF
	1316	ENDIF
	1317
	1318	!
	1319	!-- User-defined informations
	1320	CALL user_header( io )
	1321
	1322	WRITE ( io, 99 )
	1323
	1324	!
	1325	!-- Write buffer contents to disc immediately
[82]	1326	CALL local_flush( io )
[1]	1327
	1328	!
	1329	!-- Here the FORMATs start
	1330
	1331	99 FORMAT (1X,78('-'))
[200]	1332	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1333	1X,'* ',A,' *',9X,A/ &
	1334	1X,'***************************',9X,42('-'))
[102]	1335	101 FORMAT (37X,'coupled run: ',A/ &
	1336	37X,42('-'))
[200]	1337	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1338	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1339	' Run on host: ',A10)
[1]	1340	#if defined( __parallel )
[200]	1341	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1342	')',1X,A)
[200]	1343	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1344	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1345	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1346	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1347	37X,'because the job is running on an SMP-cluster')
[102]	1348	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1349	#endif
	1350	110 FORMAT (/' Numerical Schemes:'/ &
	1351	' -----------------'/)
	1352	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1353	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1354	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1355	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1356	' or Upstream')
	1357	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1358	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1359	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1360	' or Upstream')
	1361	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1362	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1363	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1364	' Translation velocity = ',A/ &
	1365	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1366	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1367	' of timestep changes)')
	1368	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1369	' timestep changes')
	1370	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1371	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1372	' maximum damping coefficient: ',F5.3, ' 1/s')
	1373	124 FORMAT (' Spline-overshoots are being suppressed')
	1374	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1375	' of'/ &
	1376	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1377	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1378	' of'/ &
	1379	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1380	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1381	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1382	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1383	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1384	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1385	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1386	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1387	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1388	' effective emissivity scheme')
	1389	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1390	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1391	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1392	A,'-cycle)'/ &
	1393	' number of grid levels: ',I2/ &
	1394	' Gauss-Seidel red/black iterations: ',I2)
	1395	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1396	I3,')')
	1397	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1398	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1399	I3,')'/ &
	1400	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1401	I3,')')
	1402	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1403	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1404	140 FORMAT (' maximum residual allowed: ',E10.3)
	1405	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1406	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1407	'step')
[87]	1408	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1409	'kinetic energy')
[1]	1410	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1411	'conserved'/ &
	1412	' using the ',A,' mode')
	1413	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
	1414	152 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
[240]	1415	2(1X,E12.5),'Pa/m', &
	1416	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
	1417	A /)
[1]	1418	200 FORMAT (//' Run time and time step information:'/ &
	1419	' ----------------------------------'/)
	1420	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1421	' CFL-factor: ',F4.2)
	1422	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1423	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1424	' End time: ',F9.3,' s')
	1425	204 FORMAT ( A,F9.3,' s')
	1426	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1427	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1428	' CPU-time used: ',F9.3,' s per timestep: ', &
	1429	' ',F9.3,' s'/ &
	1430	' per second of simulated tim', &
	1431	'e: ',F9.3,' s')
	1432	250 FORMAT (//' Computational grid and domain size:'/ &
	1433	' ----------------------------------'// &
	1434	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1435	' m dz = ',F7.3,' m'/ &
	1436	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1437	' m z(u) = ',F10.3,' m'/)
	1438	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1439	' factor: ',F5.3/ &
	1440	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1441	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1442	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1443	255 FORMAT (' Subdomains have equal size')
	1444	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1445	'have smaller sizes'/ &
	1446	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1447	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1448	' degrees')
	1449	270 FORMAT (//' Topography informations:'/ &
	1450	' -----------------------'// &
	1451	1X,'Topography: ',A)
	1452	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1453	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1454	' / ',I4)
[240]	1455	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1456	' direction' / &
	1457	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1458	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[138]	1459	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1460	' ------------------------------'// &
	1461	' Canopy mode: ', A / &
	1462	' Canopy top: ',I4 / &
	1463	' Leaf drag coefficient: ',F6.2 /)
[153]	1464	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1465	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1466	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1467	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1468	' Height: ',A,' m'/ &
	1469	' Leaf area density: ',A,' m2/m3'/ &
	1470	' Gradient: ',A,' m2/m4'/ &
	1471	' Gridpoint: ',A)
	1472
[1]	1473	300 FORMAT (//' Boundary conditions:'/ &
	1474	' -------------------'// &
	1475	' p uv ', &
	1476	' pt'// &
	1477	' B. bound.: ',A/ &
	1478	' T. bound.: ',A)
[97]	1479	301 FORMAT (/' ',A// &
[1]	1480	' B. bound.: ',A/ &
	1481	' T. bound.: ',A)
[19]	1482	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1483	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1484	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1485	'computational u,v-level:'// &
[1]	1486	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1487	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1488	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1489	307 FORMAT (' Heatflux has a random normal distribution')
	1490	308 FORMAT (' Predefined surface temperature')
[97]	1491	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1492	310 FORMAT (//' 1D-Model:'// &
	1493	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1494	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1495	312 FORMAT (' Predefined surface humidity')
	1496	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1497	314 FORMAT (' Predefined scalar value at the surface')
[19]	1498	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1499	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1500	'atmosphere model')
[1]	1501	317 FORMAT (//' Lateral boundaries:'/ &
	1502	' left/right: ',A/ &
	1503	' north/south: ',A)
	1504	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1505	'max =',F5.1,' m**2/s')
[151]	1506	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1507	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1508	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1509	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1510	' v: ',F9.6,' m2/s2')
[151]	1511	325 FORMAT (//' List output:'/ &
[1]	1512	' -----------'// &
	1513	' 1D-Profiles:'/ &
	1514	' Output every ',F8.2,' s')
[151]	1515	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1516	' Averaging input every ',F8.2,' s')
	1517	330 FORMAT (//' Data output:'/ &
	1518	' -----------'/)
	1519	331 FORMAT (/' 1D-Profiles:')
	1520	332 FORMAT (/' ',A)
	1521	333 FORMAT (' Output every ',F8.2,' s',/ &
	1522	' Time averaged over ',F8.2,' s'/ &
	1523	' Averaging input every ',F8.2,' s')
	1524	334 FORMAT (/' 2D-Arrays',A,':')
	1525	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1526	' Output every ',F8.2,' s ',A/ &
	1527	' Cross sections at ',A1,' = ',A/ &
	1528	' scalar-coordinates: ',A,' m'/)
	1529	336 FORMAT (/' 3D-Arrays',A,':')
	1530	337 FORMAT (/' Arrays: ',A/ &
	1531	' Output every ',F8.2,' s ',A/ &
	1532	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1533	338 FORMAT (' Compressed data output'/ &
	1534	' Decimal precision: ',A/)
	1535	339 FORMAT (' No output during initial ',F8.2,' s')
	1536	340 FORMAT (/' Time series:')
	1537	341 FORMAT (' Output every ',F8.2,' s'/)
	1538	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1539	' Output every ',F8.2,' s ',A/ &
	1540	' Time averaged over ',F8.2,' s'/ &
	1541	' Averaging input every ',F8.2,' s'/ &
	1542	' Cross sections at ',A1,' = ',A/ &
	1543	' scalar-coordinates: ',A,' m'/)
	1544	343 FORMAT (/' Arrays: ',A/ &
	1545	' Output every ',F8.2,' s ',A/ &
	1546	' Time averaged over ',F8.2,' s'/ &
	1547	' Averaging input every ',F8.2,' s'/ &
	1548	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1549	345 FORMAT (' Output format: ',A/)
	1550	#if defined( __dvrp_graphics )
	1551	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1552	' Output every ',F7.1,' s'/ &
	1553	' Output mode: ',A/ &
	1554	' Host / User: ',A,' / ',A/ &
	1555	' Directory: ',A// &
	1556	' The sequence contains:')
	1557	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1558	362 FORMAT (' Sectional plane ',A)
	1559	363 FORMAT (' Particles')
[237]	1560	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
[1]	1561	#endif
	1562	#if defined( __spectra )
	1563	370 FORMAT (' Spectra:')
	1564	371 FORMAT (' Output every ',F7.1,' s'/)
	1565	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1566	' Directions: ', 10(A5,',')/ &
[189]	1567	' height levels k = ', 20(I3,',')/ &
	1568	' ', 20(I3,',')/ &
	1569	' ', 20(I3,',')/ &
	1570	' ', 20(I3,',')/ &
	1571	' ', 19(I3,','),I3,'.'/ &
[1]	1572	' height levels selected for standard plot:'/ &
[189]	1573	' k = ', 20(I3,',')/ &
	1574	' ', 20(I3,',')/ &
	1575	' ', 20(I3,',')/ &
	1576	' ', 20(I3,',')/ &
	1577	' ', 19(I3,','),I3,'.'/ &
[1]	1578	' Time averaged over ', F7.1, ' s,' / &
	1579	' Profiles for the time averaging are taken every ', &
	1580	F6.1,' s')
	1581	#endif
	1582	400 FORMAT (//' Physical quantities:'/ &
	1583	' -------------------'/)
	1584	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1585	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1586	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1587	' f* = ',F9.6,' 1/s')
	1588	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1589	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1590	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1591	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1592	' ------------------------'/)
[57]	1593	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1594	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1595	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1596	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1597	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1598	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1599	' Height: ',A,' m'/ &
	1600	' Temperature: ',A,' K'/ &
	1601	' Gradient: ',A,' K/100m'/ &
	1602	' Gridpoint: ',A)
	1603	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1604	' Height: ',A,' m'/ &
	1605	' Humidity: ',A,' kg/kg'/ &
	1606	' Gradient: ',A,' (kg/kg)/100m'/ &
	1607	' Gridpoint: ',A)
	1608	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1609	' Height: ',A,' m'/ &
	1610	' Scalar concentration: ',A,' kg/m**3'/ &
	1611	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1612	' Gridpoint: ',A)
	1613	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1614	' Height: ',A,' m'/ &
	1615	' ug: ',A,' m/s'/ &
	1616	' Gradient: ',A,' 1/100s'/ &
	1617	' Gridpoint: ',A)
	1618	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1619	' Height: ',A,' m'/ &
[97]	1620	' vg: ',A,' m/s'/ &
[1]	1621	' Gradient: ',A,' 1/100s'/ &
	1622	' Gridpoint: ',A)
[97]	1623	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1624	' Height: ',A,' m'/ &
	1625	' Salinity: ',A,' psu'/ &
	1626	' Gradient: ',A,' psu/100m'/ &
	1627	' Gridpoint: ',A)
[1]	1628	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1629	' ---------------------------'/)
	1630	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1631	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1632	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1633	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1634	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1635	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1636	470 FORMAT (//' Actions during the simulation:'/ &
	1637	' -----------------------------'/)
[94]	1638	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1639	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1640	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1641	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1642	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1643	' to i/j =',I4)
	1644	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1645	1X,F5.3, ' m2/s2')
	1646	474 FORMAT (' Random number generator used : ',A/)
	1647	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1648	'respectively, if'/ &
	1649	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1650	' 3D-simulation'/)
	1651	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1652	'respectively, if the'/ &
	1653	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1654	' the 3D-simulation'/)
	1655	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1656	'respectively, if the'/ &
	1657	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1658	' the 3D-simulation'/)
	1659	480 FORMAT (' Particles:'/ &
	1660	' ---------'// &
	1661	' Particle advection is active (switched on at t = ', F7.1, &
	1662	' s)'/ &
	1663	' Start of new particle generations every ',F6.1,' s'/ &
	1664	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1665	' bottom: ', A, ' top: ', A/&
	1666	' Maximum particle age: ',F9.1,' s'/ &
[117]	1667	' Advection stopped at t = ',F9.1,' s'/ &
	1668	' Particles are sorted every ',F9.1,' s'/)
[1]	1669	481 FORMAT (' Particles have random start positions'/)
	1670	482 FORMAT (' Particles are advected only horizontally'/)
	1671	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1672	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1673	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1674	' Maximum age of the end of the tail: ',F8.2,' s')
	1675	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1676	486 FORMAT (' Particle statistics are written on file'/)
	1677	487 FORMAT (' Number of particle groups: ',I2/)
	1678	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1679	' minimum timestep for advection: ', F7.5/)
	1680	489 FORMAT (' Number of particles simultaneously released at each ', &
	1681	'point: ', I5/)
	1682	490 FORMAT (' Particle group ',I2,':'/ &
	1683	' Particle radius: ',E10.3, 'm')
	1684	491 FORMAT (' Particle inertia is activated'/ &
	1685	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1686	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1687	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1688	' y:',F8.1,' - ',F8.1,' m'/&
	1689	' z:',F8.1,' - ',F8.1,' m'/&
	1690	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1691	' m dz = ',F8.1,' m'/)
	1692	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1693	F8.2,' s'/)
	1694	495 FORMAT (' Number of particles in total domain: ',I10/)
	1695	500 FORMAT (//' 1D-Model parameters:'/ &
	1696	' -------------------'// &
	1697	' Simulation time: ',F8.1,' s'/ &
	1698	' Run-controll output every: ',F8.1,' s'/ &
	1699	' Vertical profile output every: ',F8.1,' s'/ &
	1700	' Mixing length calculation: ',A/ &
	1701	' Dissipation calculation: ',A/)
	1702	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1703
	1704
	1705	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |