Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 240

Last change on this file since 240 was 240, checked in by letzel, 16 years ago
External pressure gradient (check_parameters, init_3d_model, header, modules, parin, prognostic_equations) New topography case 'single_street_canyon'
Property svn:keywords set to `Id`
File size: 65.2 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[237]	6	! Output of cluster_size
[240]	7	! +dp_external, dp_level_b, dp_smooth, dpdxy
	8	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
	9	! canyon_wall_south
[1]	10	!
	11	! Former revisions:
	12	! -----------------
[3]	13	! $Id: header.f90 240 2009-02-18 17:50:38Z letzel $
[39]	14	!
[226]	15	! 206 2008-10-13 14:59:11Z raasch
	16	! Bugfix: error in zu index in case of section_xy = -1
	17	!
[200]	18	! 198 2008-09-17 08:55:28Z raasch
	19	! Format adjustments allowing output of larger revision numbers
	20	!
[198]	21	! 197 2008-09-16 15:29:03Z raasch
	22	! allow 100 spectra levels instead of 10 for consistency with
	23	! define_netcdf_header,
	24	! bugfix in the output of the characteristic levels of potential temperature,
	25	! geostrophic wind, scalar concentration, humidity and leaf area density,
	26	! output of turbulence recycling informations
	27	!
[139]	28	! 138 2007-11-28 10:03:58Z letzel
	29	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	30	! Allow two instead of one digit to specify isosurface and slicer variables.
	31	! Output of sorting frequency of particles
	32	!
[110]	33	! 108 2007-08-24 15:10:38Z letzel
	34	! Output of informations for coupled model runs (boundary conditions etc.)
	35	! + output of momentumfluxes at the top boundary
	36	! Rayleigh damping for ocean, e_init
	37	!
[98]	38	! 97 2007-06-21 08:23:15Z raasch
	39	! Adjustments for the ocean version.
	40	! use_pt_reference renamed use_reference
	41	!
[90]	42	! 87 2007-05-22 15:46:47Z raasch
	43	! Bugfix: output of use_upstream_for_tke
	44	!
[83]	45	! 82 2007-04-16 15:40:52Z raasch
	46	! Preprocessor strings for different linux clusters changed to "lc",
	47	! routine local_flush is used for buffer flushing
	48	!
[77]	49	! 76 2007-03-29 00:58:32Z raasch
	50	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	51	! output of the loop optimization method, moisture renamed humidity,
	52	! output of subversion revision number
	53	!
[39]	54	! 19 2007-02-23 04:53:48Z raasch
	55	! Output of scalar flux applied at top boundary
	56	!
[3]	57	! RCS Log replace by Id keyword, revision history cleaned up
	58	!
[1]	59	! Revision 1.63 2006/08/22 13:53:13 raasch
	60	! Output of dz_max
	61	!
	62	! Revision 1.1 1997/08/11 06:17:20 raasch
	63	! Initial revision
	64	!
	65	!
	66	! Description:
	67	! ------------
	68	! Writing a header with all important informations about the actual run.
	69	! This subroutine is called three times, two times at the beginning
	70	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	71	! end of the run, then writing additional information about CPU-usage on file
	72	! header.
	73	!------------------------------------------------------------------------------!
	74
	75	USE arrays_3d
	76	USE control_parameters
	77	USE cloud_parameters
	78	USE cpulog
	79	USE dvrp_variables
	80	USE grid_variables
	81	USE indices
	82	USE model_1d
	83	USE particle_attributes
	84	USE pegrid
	85	USE spectrum
	86
	87	IMPLICIT NONE
	88
	89	CHARACTER (LEN=1) :: prec
	90	CHARACTER (LEN=2) :: do2d_mode
	91	CHARACTER (LEN=5) :: section_chr
	92	CHARACTER (LEN=9) :: time_to_string
	93	CHARACTER (LEN=10) :: coor_chr, host_chr
	94	CHARACTER (LEN=16) :: begin_chr
[200]	95	CHARACTER (LEN=23) :: ver_rev
[1]	96	CHARACTER (LEN=40) :: output_format
[167]	97	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	98	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	99	run_classification
	100	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	101	temperatures, ugcomponent, vgcomponent
[1]	102	CHARACTER (LEN=85) :: roben, runten
	103
[240]	104	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
	105	cyn, cys, i, ihost, io, j, l, ll
[1]	106	REAL :: cpuseconds_per_simulated_second
	107
	108	!
	109	!-- Open the output file. At the end of the simulation, output is directed
	110	!-- to unit 19.
	111	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	112	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	113	io = 15 ! header output on file RUN_CONTROL
	114	ELSE
	115	io = 19 ! header output on file HEADER
	116	ENDIF
	117	CALL check_open( io )
	118
	119	!
	120	!-- At the end of the run, output file (HEADER) will be rewritten with
	121	!-- new informations
	122	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	123
	124	!
	125	!-- Determine kind of model run
	126	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	127	run_classification = '3D - restart run'
[147]	128	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	129	run_classification = '3D - run using 3D - prerun data'
	130	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	131	run_classification = '3D - run without 1D - prerun'
[197]	132	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	133	run_classification = '3D - run with 1D - prerun'
[197]	134	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	135	run_classification = '3D - run initialized by user'
[1]	136	ELSE
[147]	137	PRINT*,'+++ header: unknown action(s): ',initializing_actions
[1]	138	ENDIF
[97]	139	IF ( ocean ) THEN
	140	run_classification = 'ocean - ' // run_classification
	141	ELSE
	142	run_classification = 'atmosphere - ' // run_classification
	143	ENDIF
[1]	144
	145	!
	146	!-- Run-identification, date, time, host
	147	host_chr = host(1:10)
[75]	148	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	149	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	150	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	151	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	152	ADJUSTR( host_chr )
[1]	153	#if defined( __parallel )
	154	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	155	char1 = 'calculated'
	156	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	157	host(1:2) == 'lc' ) .AND. &
	158	npex == -1 .AND. pdims(2) == 1 ) THEN
	159	char1 = 'forced'
	160	ELSE
	161	char1 = 'predefined'
	162	ENDIF
	163	IF ( threads_per_task == 1 ) THEN
[102]	164	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	165	ELSE
[102]	166	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	167	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	168	ENDIF
	169	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	170	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	171	npex == -1 .AND. pdims(2) == 1 ) &
	172	THEN
[102]	173	WRITE ( io, 106 )
[1]	174	ELSEIF ( pdims(2) == 1 ) THEN
[102]	175	WRITE ( io, 107 ) 'x'
[1]	176	ELSEIF ( pdims(1) == 1 ) THEN
[102]	177	WRITE ( io, 107 ) 'y'
[1]	178	ENDIF
[102]	179	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	180	#endif
	181	WRITE ( io, 99 )
	182
	183	!
	184	!-- Numerical schemes
	185	WRITE ( io, 110 )
	186	IF ( psolver(1:7) == 'poisfft' ) THEN
	187	WRITE ( io, 111 ) TRIM( fft_method )
	188	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	189	ELSEIF ( psolver == 'sor' ) THEN
	190	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	191	ELSEIF ( psolver == 'multigrid' ) THEN
	192	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	193	IF ( mg_cycles == -1 ) THEN
	194	WRITE ( io, 140 ) residual_limit
	195	ELSE
	196	WRITE ( io, 141 ) mg_cycles
	197	ENDIF
	198	IF ( mg_switch_to_pe0_level == 0 ) THEN
	199	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	200	nzt_mg(1)
[197]	201	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	202	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	203	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	204	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	205	nzt_mg(mg_switch_to_pe0_level), &
	206	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	207	nzt_mg(1)
	208	ENDIF
	209	ENDIF
	210	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	211	THEN
	212	WRITE ( io, 142 )
	213	ENDIF
	214
	215	IF ( momentum_advec == 'pw-scheme' ) THEN
	216	WRITE ( io, 113 )
	217	ELSE
	218	WRITE ( io, 114 )
	219	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	220	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	221	overshoot_limit_w /= 0.0 ) THEN
	222	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	223	overshoot_limit_w
	224	ENDIF
	225	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	226	ups_limit_w /= 0.0 ) &
	227	THEN
	228	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	229	ENDIF
	230	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	231	ENDIF
	232	IF ( scalar_advec == 'pw-scheme' ) THEN
	233	WRITE ( io, 116 )
	234	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	235	WRITE ( io, 117 )
	236	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	237	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	238	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	239	ENDIF
	240	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	241	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	242	ENDIF
	243	ELSE
	244	WRITE ( io, 118 )
	245	ENDIF
[63]	246
	247	WRITE ( io, 139 ) TRIM( loop_optimization )
	248
[1]	249	IF ( galilei_transformation ) THEN
	250	IF ( use_ug_for_galilei_tr ) THEN
	251	char1 = 'geostrophic wind'
	252	ELSE
	253	char1 = 'mean wind in model domain'
	254	ENDIF
	255	IF ( simulated_time_at_begin == simulated_time ) THEN
	256	char2 = 'at the start of the run'
	257	ELSE
	258	char2 = 'at the end of the run'
	259	ENDIF
	260	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	261	advected_distance_x/1000.0, advected_distance_y/1000.0
	262	ENDIF
	263	IF ( timestep_scheme == 'leapfrog' ) THEN
	264	WRITE ( io, 120 )
	265	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	266	WRITE ( io, 121 )
	267	ELSE
	268	WRITE ( io, 122 ) timestep_scheme
	269	ENDIF
[87]	270	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	271	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	272	IF ( .NOT. ocean ) THEN
	273	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	274	rayleigh_damping_factor
	275	ELSE
	276	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	277	rayleigh_damping_factor
	278	ENDIF
[1]	279	ENDIF
[75]	280	IF ( humidity ) THEN
[1]	281	IF ( .NOT. cloud_physics ) THEN
	282	WRITE ( io, 129 )
	283	ELSE
	284	WRITE ( io, 130 )
	285	WRITE ( io, 131 )
	286	IF ( radiation ) WRITE ( io, 132 )
	287	IF ( precipitation ) WRITE ( io, 133 )
	288	ENDIF
	289	ENDIF
	290	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	291	IF ( conserve_volume_flow ) THEN
	292	WRITE ( io, 150 )
	293	ELSEIF ( dp_external ) THEN
	294	IF ( dp_smooth ) THEN
	295	WRITE ( io, 151 ) dpdxy, dp_level_b, ', vertically smoothed.'
	296	ELSE
	297	WRITE ( io, 151 ) dpdxy, dp_level_b, '.'
	298	ENDIF
	299	ENDIF
[1]	300	WRITE ( io, 99 )
	301
	302	!
	303	!-- Runtime and timestep informations
	304	WRITE ( io, 200 )
	305	IF ( .NOT. dt_fixed ) THEN
	306	WRITE ( io, 201 ) dt_max, cfl_factor
	307	ELSE
	308	WRITE ( io, 202 ) dt
	309	ENDIF
	310	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	311
	312	IF ( time_restart /= 9999999.9 .AND. &
	313	simulated_time_at_begin == simulated_time ) THEN
	314	IF ( dt_restart == 9999999.9 ) THEN
	315	WRITE ( io, 204 ) ' Restart at: ',time_restart
	316	ELSE
	317	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	318	ENDIF
	319	ENDIF
	320
	321	IF ( simulated_time_at_begin /= simulated_time ) THEN
	322	i = MAX ( log_point_s(10)%counts, 1 )
	323	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	324	cpuseconds_per_simulated_second = 0.0
	325	ELSE
	326	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	327	( simulated_time - &
	328	simulated_time_at_begin )
	329	ENDIF
	330	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	331	log_point_s(10)%sum / REAL( i ), &
	332	cpuseconds_per_simulated_second
	333	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	334	IF ( dt_restart == 9999999.9 ) THEN
	335	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	336	ELSE
	337	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	338	ENDIF
	339	ENDIF
	340	ENDIF
	341
	342	!
	343	!-- Computational grid
[94]	344	IF ( .NOT. ocean ) THEN
	345	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	346	IF ( dz_stretch_level_index < nzt+1 ) THEN
	347	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	348	dz_stretch_factor, dz_max
	349	ENDIF
	350	ELSE
	351	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	352	IF ( dz_stretch_level_index > 0 ) THEN
	353	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	354	dz_stretch_factor, dz_max
	355	ENDIF
[1]	356	ENDIF
	357	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	358	MIN( nnz+2, nzt+2 )
[76]	359	IF ( numprocs > 1 ) THEN
	360	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	361	WRITE ( io, 255 )
	362	ELSE
	363	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	364	ENDIF
[1]	365	ENDIF
	366	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	367
	368	!
	369	!-- Topography
	370	WRITE ( io, 270 ) topography
	371	SELECT CASE ( TRIM( topography ) )
	372
	373	CASE ( 'flat' )
	374	! no actions necessary
	375
	376	CASE ( 'single_building' )
	377	blx = INT( building_length_x / dx )
	378	bly = INT( building_length_y / dy )
	379	bh = INT( building_height / dz )
	380
	381	IF ( building_wall_left == 9999999.9 ) THEN
	382	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	383	ENDIF
	384	bxl = INT ( building_wall_left / dx + 0.5 )
	385	bxr = bxl + blx
	386
	387	IF ( building_wall_south == 9999999.9 ) THEN
	388	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	389	ENDIF
	390	bys = INT ( building_wall_south / dy + 0.5 )
	391	byn = bys + bly
	392
	393	WRITE ( io, 271 ) building_length_x, building_length_y, &
	394	building_height, bxl, bxr, bys, byn
	395
[240]	396	CASE ( 'single_street_canyon' )
	397	ch = NINT( canyon_height / dz )
	398	IF ( canyon_width_x /= 9999999.9 ) THEN
	399	!
	400	!-- Street canyon in y direction
	401	cwx = NINT( canyon_width_x / dx )
	402	IF ( canyon_wall_left == 9999999.9 ) THEN
	403	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	404	ENDIF
	405	cxl = NINT( canyon_wall_left / dx )
	406	cxr = cxl + cwx
	407	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	408
	409	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	410	!
	411	!-- Street canyon in x direction
	412	cwy = NINT( canyon_width_y / dy )
	413	IF ( canyon_wall_south == 9999999.9 ) THEN
	414	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	415	ENDIF
	416	cys = NINT( canyon_wall_south / dy )
	417	cyn = cys + cwy
	418	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	419	ENDIF
	420
[1]	421	END SELECT
	422
[138]	423	IF ( plant_canopy ) THEN
	424
	425	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	426	IF ( passive_scalar ) THEN
	427	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	428	leaf_surface_concentration
	429	ENDIF
[138]	430
[1]	431	!
[153]	432	!-- Heat flux at the top of vegetation
	433	WRITE ( io, 282 ) cthf
	434
	435	!
[138]	436	!-- Leaf area density profile
	437	!-- Building output strings, starting with surface value
	438	WRITE ( learde, '(F6.2)' ) lad_surface
	439	gradients = '------'
	440	slices = ' 0'
	441	coordinates = ' 0.0'
	442	i = 1
	443	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	444
	445	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	446	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	447
	448	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	449	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	450
	451	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	452	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	453
	454	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	455	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	456
	457	i = i + 1
	458	ENDDO
	459
[153]	460	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	461	TRIM( gradients ), TRIM( slices )
	462
	463	ENDIF
	464
	465	!
[1]	466	!-- Boundary conditions
	467	IF ( ibc_p_b == 0 ) THEN
	468	runten = 'p(0) = 0 \|'
	469	ELSEIF ( ibc_p_b == 1 ) THEN
	470	runten = 'p(0) = p(1) \|'
	471	ELSE
	472	runten = 'p(0) = p(1) +R\|'
	473	ENDIF
	474	IF ( ibc_p_t == 0 ) THEN
	475	roben = 'p(nzt+1) = 0 \|'
	476	ELSE
	477	roben = 'p(nzt+1) = p(nzt) \|'
	478	ENDIF
	479
	480	IF ( ibc_uv_b == 0 ) THEN
	481	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	482	ELSE
	483	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	484	ENDIF
[132]	485	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	486	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	487	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	488	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	489	ELSE
	490	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	491	ENDIF
	492
	493	IF ( ibc_pt_b == 0 ) THEN
	494	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	495	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	496	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	497	ELSEIF ( ibc_pt_b == 2 ) THEN
	498	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	499	ENDIF
	500	IF ( ibc_pt_t == 0 ) THEN
[19]	501	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	502	ELSEIF( ibc_pt_t == 1 ) THEN
	503	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	504	ELSEIF( ibc_pt_t == 2 ) THEN
	505	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	506	ENDIF
	507
	508	WRITE ( io, 300 ) runten, roben
	509
	510	IF ( .NOT. constant_diffusion ) THEN
	511	IF ( ibc_e_b == 1 ) THEN
	512	runten = 'e(0) = e(1)'
	513	ELSE
	514	runten = 'e(0) = e(1) = (u/0.1)*2'
	515	ENDIF
	516	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	517
[97]	518	WRITE ( io, 301 ) 'e', runten, roben
[1]	519
	520	ENDIF
	521
[97]	522	IF ( ocean ) THEN
	523	runten = 'sa(0) = sa(1)'
	524	IF ( ibc_sa_t == 0 ) THEN
	525	roben = 'sa(nzt+1) = sa_surface'
[1]	526	ELSE
[97]	527	roben = 'sa(nzt+1) = sa(nzt)'
[1]	528	ENDIF
[97]	529	WRITE ( io, 301 ) 'sa', runten, roben
	530	ENDIF
[1]	531
[97]	532	IF ( humidity ) THEN
	533	IF ( ibc_q_b == 0 ) THEN
	534	runten = 'q(0) = q_surface'
	535	ELSE
	536	runten = 'q(0) = q(1)'
	537	ENDIF
	538	IF ( ibc_q_t == 0 ) THEN
	539	roben = 'q(nzt) = q_top'
	540	ELSE
	541	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	542	ENDIF
	543	WRITE ( io, 301 ) 'q', runten, roben
	544	ENDIF
[1]	545
[97]	546	IF ( passive_scalar ) THEN
	547	IF ( ibc_q_b == 0 ) THEN
	548	runten = 's(0) = s_surface'
	549	ELSE
	550	runten = 's(0) = s(1)'
	551	ENDIF
	552	IF ( ibc_q_t == 0 ) THEN
	553	roben = 's(nzt) = s_top'
	554	ELSE
	555	roben = 's(nzt) = s(nzt-1) + ds/dz'
	556	ENDIF
	557	WRITE ( io, 301 ) 's', runten, roben
[1]	558	ENDIF
	559
	560	IF ( use_surface_fluxes ) THEN
	561	WRITE ( io, 303 )
	562	IF ( constant_heatflux ) THEN
	563	WRITE ( io, 306 ) surface_heatflux
	564	IF ( random_heatflux ) WRITE ( io, 307 )
	565	ENDIF
[75]	566	IF ( humidity .AND. constant_waterflux ) THEN
[1]	567	WRITE ( io, 311 ) surface_waterflux
	568	ENDIF
	569	IF ( passive_scalar .AND. constant_waterflux ) THEN
	570	WRITE ( io, 313 ) surface_waterflux
	571	ENDIF
	572	ENDIF
	573
[19]	574	IF ( use_top_fluxes ) THEN
	575	WRITE ( io, 304 )
[102]	576	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	577	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	578	IF ( constant_top_heatflux ) THEN
	579	WRITE ( io, 306 ) top_heatflux
	580	ENDIF
	581	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	582	WRITE ( io, 316 )
[19]	583	ENDIF
[97]	584	IF ( ocean .AND. constant_top_salinityflux ) THEN
	585	WRITE ( io, 309 ) top_salinityflux
	586	ENDIF
[75]	587	IF ( humidity .OR. passive_scalar ) THEN
[19]	588	WRITE ( io, 315 )
	589	ENDIF
	590	ENDIF
	591
[1]	592	IF ( prandtl_layer ) THEN
[94]	593	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	594	rif_min, rif_max
[1]	595	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	596	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	597	WRITE ( io, 312 )
	598	ENDIF
	599	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	600	WRITE ( io, 314 )
	601	ENDIF
	602	ELSE
	603	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	604	WRITE ( io, 310 ) rif_min, rif_max
	605	ENDIF
	606	ENDIF
	607
	608	WRITE ( io, 317 ) bc_lr, bc_ns
	609	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	610	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	611	IF ( turbulent_inflow ) THEN
	612	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	613	inflow_damping_height, inflow_damping_width
	614	ENDIF
[1]	615	ENDIF
	616
	617	!
	618	!-- Listing of 1D-profiles
[151]	619	WRITE ( io, 325 ) dt_dopr_listing
[1]	620	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	621	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	622	ENDIF
	623
	624	!
	625	!-- DATA output
	626	WRITE ( io, 330 )
	627	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	628	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	629	ENDIF
	630
	631	!
	632	!-- 1D-profiles
	633	dopr_chr = 'Profile:'
	634	IF ( dopr_n /= 0 ) THEN
	635	WRITE ( io, 331 )
	636
	637	output_format = ''
	638	IF ( netcdf_output ) THEN
	639	IF ( netcdf_64bit ) THEN
	640	output_format = 'netcdf (64 bit offset)'
	641	ELSE
	642	output_format = 'netcdf'
	643	ENDIF
	644	ENDIF
	645	IF ( profil_output ) THEN
	646	IF ( netcdf_output ) THEN
	647	output_format = TRIM( output_format ) // ' and profil'
	648	ELSE
	649	output_format = 'profil'
	650	ENDIF
	651	ENDIF
	652	WRITE ( io, 345 ) output_format
	653
	654	DO i = 1, dopr_n
	655	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	656	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	657	WRITE ( io, 332 ) dopr_chr
	658	dopr_chr = ' :'
	659	ENDIF
	660	ENDDO
	661
	662	IF ( dopr_chr /= '' ) THEN
	663	WRITE ( io, 332 ) dopr_chr
	664	ENDIF
	665	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	666	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	667	ENDIF
	668
	669	!
	670	!-- 2D-arrays
	671	DO av = 0, 1
	672
	673	i = 1
	674	do2d_xy = ''
	675	do2d_xz = ''
	676	do2d_yz = ''
	677	DO WHILE ( do2d(av,i) /= ' ' )
	678
	679	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	680	do2d_mode = do2d(av,i)(l-1:l)
	681
	682	SELECT CASE ( do2d_mode )
	683	CASE ( 'xy' )
	684	ll = LEN_TRIM( do2d_xy )
	685	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	686	CASE ( 'xz' )
	687	ll = LEN_TRIM( do2d_xz )
	688	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	689	CASE ( 'yz' )
	690	ll = LEN_TRIM( do2d_yz )
	691	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	692	END SELECT
	693
	694	i = i + 1
	695
	696	ENDDO
	697
	698	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	699	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	700	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	701	( netcdf_output .OR. iso2d_output ) ) THEN
	702
	703	IF ( av == 0 ) THEN
	704	WRITE ( io, 334 ) ''
	705	ELSE
	706	WRITE ( io, 334 ) '(time-averaged)'
	707	ENDIF
	708
	709	IF ( do2d_at_begin ) THEN
	710	begin_chr = 'and at the start'
	711	ELSE
	712	begin_chr = ''
	713	ENDIF
	714
	715	output_format = ''
	716	IF ( netcdf_output ) THEN
	717	IF ( netcdf_64bit ) THEN
	718	output_format = 'netcdf (64 bit offset)'
	719	ELSE
	720	output_format = 'netcdf'
	721	ENDIF
	722	ENDIF
	723	IF ( iso2d_output ) THEN
	724	IF ( netcdf_output ) THEN
	725	output_format = TRIM( output_format ) // ' and iso2d'
	726	ELSE
	727	output_format = 'iso2d'
	728	ENDIF
	729	ENDIF
	730	WRITE ( io, 345 ) output_format
	731
	732	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	733	i = 1
	734	slices = '/'
	735	coordinates = '/'
	736	!
	737	!-- Building strings with index and coordinate informations of the
	738	!-- slices
	739	DO WHILE ( section(i,1) /= -9999 )
	740
	741	WRITE (section_chr,'(I5)') section(i,1)
	742	section_chr = ADJUSTL( section_chr )
	743	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	744
[206]	745	IF ( section(i,1) == -1 ) THEN
	746	WRITE (coor_chr,'(F10.1)') -1.0
	747	ELSE
	748	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	749	ENDIF
[1]	750	coor_chr = ADJUSTL( coor_chr )
	751	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	752
	753	i = i + 1
	754	ENDDO
	755	IF ( av == 0 ) THEN
	756	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	757	TRIM( begin_chr ), 'k', TRIM( slices ), &
	758	TRIM( coordinates )
	759	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	760	WRITE ( io, 339 ) skip_time_do2d_xy
	761	ENDIF
	762	ELSE
	763	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	764	TRIM( begin_chr ), averaging_interval, &
	765	dt_averaging_input, 'k', TRIM( slices ), &
	766	TRIM( coordinates )
	767	IF ( skip_time_data_output_av /= 0.0 ) THEN
	768	WRITE ( io, 339 ) skip_time_data_output_av
	769	ENDIF
	770	ENDIF
	771
	772	ENDIF
	773
	774	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	775	i = 1
	776	slices = '/'
	777	coordinates = '/'
	778	!
	779	!-- Building strings with index and coordinate informations of the
	780	!-- slices
	781	DO WHILE ( section(i,2) /= -9999 )
	782
	783	WRITE (section_chr,'(I5)') section(i,2)
	784	section_chr = ADJUSTL( section_chr )
	785	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	786
	787	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	788	coor_chr = ADJUSTL( coor_chr )
	789	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	790
	791	i = i + 1
	792	ENDDO
	793	IF ( av == 0 ) THEN
	794	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	795	TRIM( begin_chr ), 'j', TRIM( slices ), &
	796	TRIM( coordinates )
	797	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	798	WRITE ( io, 339 ) skip_time_do2d_xz
	799	ENDIF
	800	ELSE
	801	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	802	TRIM( begin_chr ), averaging_interval, &
	803	dt_averaging_input, 'j', TRIM( slices ), &
	804	TRIM( coordinates )
	805	IF ( skip_time_data_output_av /= 0.0 ) THEN
	806	WRITE ( io, 339 ) skip_time_data_output_av
	807	ENDIF
	808	ENDIF
	809	ENDIF
	810
	811	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	812	i = 1
	813	slices = '/'
	814	coordinates = '/'
	815	!
	816	!-- Building strings with index and coordinate informations of the
	817	!-- slices
	818	DO WHILE ( section(i,3) /= -9999 )
	819
	820	WRITE (section_chr,'(I5)') section(i,3)
	821	section_chr = ADJUSTL( section_chr )
	822	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	823
	824	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	825	coor_chr = ADJUSTL( coor_chr )
	826	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	827
	828	i = i + 1
	829	ENDDO
	830	IF ( av == 0 ) THEN
	831	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	832	TRIM( begin_chr ), 'i', TRIM( slices ), &
	833	TRIM( coordinates )
	834	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	835	WRITE ( io, 339 ) skip_time_do2d_yz
	836	ENDIF
	837	ELSE
	838	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	839	TRIM( begin_chr ), averaging_interval, &
	840	dt_averaging_input, 'i', TRIM( slices ), &
	841	TRIM( coordinates )
	842	IF ( skip_time_data_output_av /= 0.0 ) THEN
	843	WRITE ( io, 339 ) skip_time_data_output_av
	844	ENDIF
	845	ENDIF
	846	ENDIF
	847
	848	ENDIF
	849
	850	ENDDO
	851
	852	!
	853	!-- 3d-arrays
	854	DO av = 0, 1
	855
	856	i = 1
	857	do3d_chr = ''
	858	DO WHILE ( do3d(av,i) /= ' ' )
	859
	860	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	861	i = i + 1
	862
	863	ENDDO
	864
	865	IF ( do3d_chr /= '' ) THEN
	866	IF ( av == 0 ) THEN
	867	WRITE ( io, 336 ) ''
	868	ELSE
	869	WRITE ( io, 336 ) '(time-averaged)'
	870	ENDIF
	871
	872	output_format = ''
	873	IF ( netcdf_output ) THEN
[46]	874	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	875	output_format = 'netcdf (64 bit offset)'
	876	ELSE
	877	output_format = 'netcdf'
	878	ENDIF
	879	ENDIF
	880	IF ( avs_output ) THEN
	881	IF ( netcdf_output ) THEN
	882	output_format = TRIM( output_format ) // ' and avs'
	883	ELSE
	884	output_format = 'avs'
	885	ENDIF
	886	ENDIF
	887	WRITE ( io, 345 ) output_format
	888
	889	IF ( do3d_at_begin ) THEN
	890	begin_chr = 'and at the start'
	891	ELSE
	892	begin_chr = ''
	893	ENDIF
	894	IF ( av == 0 ) THEN
	895	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	896	zu(nz_do3d), nz_do3d
	897	ELSE
	898	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	899	TRIM( begin_chr ), averaging_interval, &
	900	dt_averaging_input, zu(nz_do3d), nz_do3d
	901	ENDIF
	902
	903	IF ( do3d_compress ) THEN
	904	do3d_chr = ''
	905	i = 1
	906	DO WHILE ( do3d(av,i) /= ' ' )
	907
	908	SELECT CASE ( do3d(av,i) )
	909	CASE ( 'u' )
	910	j = 1
	911	CASE ( 'v' )
	912	j = 2
	913	CASE ( 'w' )
	914	j = 3
	915	CASE ( 'p' )
	916	j = 4
	917	CASE ( 'pt' )
	918	j = 5
	919	END SELECT
	920	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	921	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	922	':' // prec // ','
	923	i = i + 1
	924
	925	ENDDO
	926	WRITE ( io, 338 ) do3d_chr
	927
	928	ENDIF
	929
	930	IF ( av == 0 ) THEN
	931	IF ( skip_time_do3d /= 0.0 ) THEN
	932	WRITE ( io, 339 ) skip_time_do3d
	933	ENDIF
	934	ELSE
	935	IF ( skip_time_data_output_av /= 0.0 ) THEN
	936	WRITE ( io, 339 ) skip_time_data_output_av
	937	ENDIF
	938	ENDIF
	939
	940	ENDIF
	941
	942	ENDDO
	943
	944	!
	945	!-- Timeseries
	946	IF ( dt_dots /= 9999999.9 ) THEN
	947	WRITE ( io, 340 )
	948
	949	output_format = ''
	950	IF ( netcdf_output ) THEN
	951	IF ( netcdf_64bit ) THEN
	952	output_format = 'netcdf (64 bit offset)'
	953	ELSE
	954	output_format = 'netcdf'
	955	ENDIF
	956	ENDIF
	957	IF ( profil_output ) THEN
	958	IF ( netcdf_output ) THEN
	959	output_format = TRIM( output_format ) // ' and profil'
	960	ELSE
	961	output_format = 'profil'
	962	ENDIF
	963	ENDIF
	964	WRITE ( io, 345 ) output_format
	965	WRITE ( io, 341 ) dt_dots
	966	ENDIF
	967
	968	#if defined( __dvrp_graphics )
	969	!
	970	!-- Dvrp-output
	971	IF ( dt_dvrp /= 9999999.9 ) THEN
	972	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	973	TRIM( dvrp_username ), TRIM( dvrp_directory )
	974	i = 1
	975	l = 0
	976	DO WHILE ( mode_dvrp(i) /= ' ' )
	977	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	978	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	979	l = l + 1
	980	IF ( do3d(0,j) /= ' ' ) THEN
	981	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	982	ENDIF
	983	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	984	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	985	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	986	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	987	WRITE ( io, 363 )
	988	ENDIF
	989	i = i + 1
	990	ENDDO
[237]	991
	992	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
	993	WRITE ( io, 364 ) cluster_size
	994	ENDIF
	995
[1]	996	ENDIF
	997	#endif
	998
	999	#if defined( __spectra )
	1000	!
	1001	!-- Spectra output
	1002	IF ( dt_dosp /= 9999999.9 ) THEN
	1003	WRITE ( io, 370 )
	1004
	1005	output_format = ''
	1006	IF ( netcdf_output ) THEN
	1007	IF ( netcdf_64bit ) THEN
	1008	output_format = 'netcdf (64 bit offset)'
	1009	ELSE
	1010	output_format = 'netcdf'
	1011	ENDIF
	1012	ENDIF
	1013	IF ( profil_output ) THEN
	1014	IF ( netcdf_output ) THEN
	1015	output_format = TRIM( output_format ) // ' and profil'
	1016	ELSE
	1017	output_format = 'profil'
	1018	ENDIF
	1019	ENDIF
	1020	WRITE ( io, 345 ) output_format
	1021	WRITE ( io, 371 ) dt_dosp
	1022	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1023	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1024	( spectra_direction(i), i = 1,10 ), &
[189]	1025	( comp_spectra_level(i), i = 1,100 ), &
	1026	( plot_spectra_level(i), i = 1,100 ), &
[1]	1027	averaging_interval_sp, dt_averaging_input_pr
	1028	ENDIF
	1029	#endif
	1030
	1031	WRITE ( io, 99 )
	1032
	1033	!
	1034	!-- Physical quantities
	1035	WRITE ( io, 400 )
	1036
	1037	!
	1038	!-- Geostrophic parameters
	1039	WRITE ( io, 410 ) omega, phi, f, fs
	1040
	1041	!
	1042	!-- Other quantities
	1043	WRITE ( io, 411 ) g
[97]	1044	IF ( use_reference ) THEN
	1045	IF ( ocean ) THEN
	1046	WRITE ( io, 412 ) prho_reference
	1047	ELSE
	1048	WRITE ( io, 413 ) pt_reference
	1049	ENDIF
	1050	ENDIF
[1]	1051
	1052	!
	1053	!-- Cloud physics parameters
	1054	IF ( cloud_physics ) THEN
[57]	1055	WRITE ( io, 415 )
	1056	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1057	ENDIF
	1058
	1059	!-- Profile of the geostrophic wind (component ug)
	1060	!-- Building output strings
	1061	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1062	gradients = '------'
	1063	slices = ' 0'
	1064	coordinates = ' 0.0'
	1065	i = 1
	1066	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1067
[167]	1068	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1069	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1070
[167]	1071	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1072	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1073
[167]	1074	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1075	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1076
[167]	1077	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1078	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1079
	1080	i = i + 1
	1081	ENDDO
	1082
	1083	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1084	TRIM( gradients ), TRIM( slices )
	1085
	1086	!-- Profile of the geostrophic wind (component vg)
	1087	!-- Building output strings
	1088	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1089	gradients = '------'
	1090	slices = ' 0'
	1091	coordinates = ' 0.0'
	1092	i = 1
	1093	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1094
[167]	1095	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1096	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1097
[167]	1098	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1099	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1100
[167]	1101	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1102	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1103
[167]	1104	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1105	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1106
	1107	i = i + 1
	1108	ENDDO
	1109
	1110	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1111	TRIM( gradients ), TRIM( slices )
	1112
	1113	!
	1114	!-- Initial temperature profile
	1115	!-- Building output strings, starting with surface temperature
	1116	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1117	gradients = '------'
	1118	slices = ' 0'
	1119	coordinates = ' 0.0'
	1120	i = 1
	1121	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1122
[94]	1123	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1124	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1125
[94]	1126	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1127	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1128
[94]	1129	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1130	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1131
[94]	1132	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1133	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1134
	1135	i = i + 1
	1136	ENDDO
	1137
	1138	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1139	TRIM( gradients ), TRIM( slices )
	1140
	1141	!
	1142	!-- Initial humidity profile
	1143	!-- Building output strings, starting with surface humidity
[75]	1144	IF ( humidity .OR. passive_scalar ) THEN
[1]	1145	WRITE ( temperatures, '(E8.1)' ) q_surface
	1146	gradients = '--------'
	1147	slices = ' 0'
	1148	coordinates = ' 0.0'
	1149	i = 1
	1150	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1151
	1152	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1153	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1154
	1155	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1156	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1157
	1158	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1159	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1160
	1161	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1162	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1163
	1164	i = i + 1
	1165	ENDDO
	1166
[75]	1167	IF ( humidity ) THEN
[1]	1168	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1169	TRIM( gradients ), TRIM( slices )
	1170	ELSE
	1171	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1172	TRIM( gradients ), TRIM( slices )
	1173	ENDIF
	1174	ENDIF
	1175
	1176	!
[97]	1177	!-- Initial salinity profile
	1178	!-- Building output strings, starting with surface salinity
	1179	IF ( ocean ) THEN
	1180	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1181	gradients = '------'
	1182	slices = ' 0'
	1183	coordinates = ' 0.0'
	1184	i = 1
	1185	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1186
	1187	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1188	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1189
	1190	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1191	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1192
	1193	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1194	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1195
	1196	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1197	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1198
	1199	i = i + 1
	1200	ENDDO
	1201
	1202	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1203	TRIM( gradients ), TRIM( slices )
	1204	ENDIF
	1205
	1206	!
[1]	1207	!-- LES / turbulence parameters
	1208	WRITE ( io, 450 )
	1209
	1210	!--
	1211	! ... LES-constants used must still be added here
	1212	!--
	1213	IF ( constant_diffusion ) THEN
	1214	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1215	prandtl_number
	1216	ENDIF
	1217	IF ( .NOT. constant_diffusion) THEN
[108]	1218	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1219	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1220	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1221	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1222	ENDIF
	1223
	1224	!
	1225	!-- Special actions during the run
	1226	WRITE ( io, 470 )
	1227	IF ( create_disturbances ) THEN
	1228	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1229	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1230	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1231	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1232	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1233	ELSE
	1234	WRITE ( io, 473 ) disturbance_energy_limit
	1235	ENDIF
	1236	WRITE ( io, 474 ) TRIM( random_generator )
	1237	ENDIF
	1238	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1239	WRITE ( io, 475 ) pt_surface_initial_change
	1240	ENDIF
[75]	1241	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1242	WRITE ( io, 476 ) q_surface_initial_change
	1243	ENDIF
	1244	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1245	WRITE ( io, 477 ) q_surface_initial_change
	1246	ENDIF
	1247
[60]	1248	IF ( particle_advection ) THEN
[1]	1249	!
[60]	1250	!-- Particle attributes
	1251	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1252	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1253	end_time_prel, dt_sort_particles
[60]	1254	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1255	IF ( random_start_position ) WRITE ( io, 481 )
	1256	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1257	WRITE ( io, 495 ) total_number_of_particles
	1258	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1259	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1260	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1261	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1262	WRITE ( io, 484 ) total_number_of_tails, &
	1263	minimum_tailpoint_distance, &
	1264	maximum_tailpoint_age
	1265	ENDIF
[1]	1266	ENDIF
[60]	1267	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1268	WRITE ( io, 485 ) dt_write_particle_data
	1269	output_format = ''
	1270	IF ( netcdf_output ) THEN
	1271	IF ( netcdf_64bit ) THEN
	1272	output_format = 'netcdf (64 bit offset) and binary'
	1273	ELSE
	1274	output_format = 'netcdf and binary'
	1275	ENDIF
[1]	1276	ELSE
[60]	1277	output_format = 'binary'
[1]	1278	ENDIF
[60]	1279	WRITE ( io, 345 ) output_format
[1]	1280	ENDIF
[60]	1281	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1282	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1283
[60]	1284	WRITE ( io, 487 ) number_of_particle_groups
[1]	1285
[60]	1286	DO i = 1, number_of_particle_groups
	1287	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1288	WRITE ( io, 490 ) i, 0.0
	1289	WRITE ( io, 492 )
[1]	1290	ELSE
[60]	1291	WRITE ( io, 490 ) i, radius(i)
	1292	IF ( density_ratio(i) /= 0.0 ) THEN
	1293	WRITE ( io, 491 ) density_ratio(i)
	1294	ELSE
	1295	WRITE ( io, 492 )
	1296	ENDIF
[1]	1297	ENDIF
[60]	1298	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1299	pdx(i), pdy(i), pdz(i)
	1300	ENDDO
[1]	1301
[60]	1302	ENDIF
[1]	1303
[60]	1304
[1]	1305	!
	1306	!-- Parameters of 1D-model
	1307	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1308	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1309	mixing_length_1d, dissipation_1d
	1310	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1311	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1312	ENDIF
	1313	ENDIF
	1314
	1315	!
	1316	!-- User-defined informations
	1317	CALL user_header( io )
	1318
	1319	WRITE ( io, 99 )
	1320
	1321	!
	1322	!-- Write buffer contents to disc immediately
[82]	1323	CALL local_flush( io )
[1]	1324
	1325	!
	1326	!-- Here the FORMATs start
	1327
	1328	99 FORMAT (1X,78('-'))
[200]	1329	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1330	1X,'* ',A,' *',9X,A/ &
	1331	1X,'***************************',9X,42('-'))
[102]	1332	101 FORMAT (37X,'coupled run: ',A/ &
	1333	37X,42('-'))
[200]	1334	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1335	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1336	' Run on host: ',A10)
[1]	1337	#if defined( __parallel )
[200]	1338	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1339	')',1X,A)
[200]	1340	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1341	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1342	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1343	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1344	37X,'because the job is running on an SMP-cluster')
[102]	1345	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1346	#endif
	1347	110 FORMAT (/' Numerical Schemes:'/ &
	1348	' -----------------'/)
	1349	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1350	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1351	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1352	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1353	' or Upstream')
	1354	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1355	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1356	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1357	' or Upstream')
	1358	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1359	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1360	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1361	' Translation velocity = ',A/ &
	1362	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1363	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1364	' of timestep changes)')
	1365	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1366	' timestep changes')
	1367	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1368	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1369	' maximum damping coefficient: ',F5.3, ' 1/s')
	1370	124 FORMAT (' Spline-overshoots are being suppressed')
	1371	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1372	' of'/ &
	1373	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1374	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1375	' of'/ &
	1376	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1377	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1378	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1379	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1380	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1381	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1382	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1383	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1384	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1385	' effective emissivity scheme')
	1386	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1387	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1388	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1389	A,'-cycle)'/ &
	1390	' number of grid levels: ',I2/ &
	1391	' Gauss-Seidel red/black iterations: ',I2)
	1392	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1393	I3,')')
	1394	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1395	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1396	I3,')'/ &
	1397	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1398	I3,')')
	1399	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1400	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1401	140 FORMAT (' maximum residual allowed: ',E10.3)
	1402	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1403	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1404	'step')
[87]	1405	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1406	'kinetic energy')
[1]	1407	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1408	'conserved')
[240]	1409	151 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
	1410	2(1X,E12.5),'Pa/m', &
	1411	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
	1412	A /)
[1]	1413	200 FORMAT (//' Run time and time step information:'/ &
	1414	' ----------------------------------'/)
	1415	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1416	' CFL-factor: ',F4.2)
	1417	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1418	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1419	' End time: ',F9.3,' s')
	1420	204 FORMAT ( A,F9.3,' s')
	1421	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1422	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1423	' CPU-time used: ',F9.3,' s per timestep: ', &
	1424	' ',F9.3,' s'/ &
	1425	' per second of simulated tim', &
	1426	'e: ',F9.3,' s')
	1427	250 FORMAT (//' Computational grid and domain size:'/ &
	1428	' ----------------------------------'// &
	1429	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1430	' m dz = ',F7.3,' m'/ &
	1431	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1432	' m z(u) = ',F10.3,' m'/)
	1433	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1434	' factor: ',F5.3/ &
	1435	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1436	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1437	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1438	255 FORMAT (' Subdomains have equal size')
	1439	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1440	'have smaller sizes'/ &
	1441	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1442	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1443	' degrees')
	1444	270 FORMAT (//' Topography informations:'/ &
	1445	' -----------------------'// &
	1446	1X,'Topography: ',A)
	1447	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1448	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1449	' / ',I4)
[240]	1450	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1451	' direction' / &
	1452	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1453	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[138]	1454	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1455	' ------------------------------'// &
	1456	' Canopy mode: ', A / &
	1457	' Canopy top: ',I4 / &
	1458	' Leaf drag coefficient: ',F6.2 /)
[153]	1459	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1460	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1461	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1462	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1463	' Height: ',A,' m'/ &
	1464	' Leaf area density: ',A,' m2/m3'/ &
	1465	' Gradient: ',A,' m2/m4'/ &
	1466	' Gridpoint: ',A)
	1467
[1]	1468	300 FORMAT (//' Boundary conditions:'/ &
	1469	' -------------------'// &
	1470	' p uv ', &
	1471	' pt'// &
	1472	' B. bound.: ',A/ &
	1473	' T. bound.: ',A)
[97]	1474	301 FORMAT (/' ',A// &
[1]	1475	' B. bound.: ',A/ &
	1476	' T. bound.: ',A)
[19]	1477	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1478	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1479	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1480	'computational u,v-level:'// &
[1]	1481	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1482	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1483	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1484	307 FORMAT (' Heatflux has a random normal distribution')
	1485	308 FORMAT (' Predefined surface temperature')
[97]	1486	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1487	310 FORMAT (//' 1D-Model:'// &
	1488	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1489	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1490	312 FORMAT (' Predefined surface humidity')
	1491	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1492	314 FORMAT (' Predefined scalar value at the surface')
[19]	1493	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1494	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1495	'atmosphere model')
[1]	1496	317 FORMAT (//' Lateral boundaries:'/ &
	1497	' left/right: ',A/ &
	1498	' north/south: ',A)
	1499	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1500	'max =',F5.1,' m**2/s')
[151]	1501	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1502	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1503	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1504	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1505	' v: ',F9.6,' m2/s2')
[151]	1506	325 FORMAT (//' List output:'/ &
[1]	1507	' -----------'// &
	1508	' 1D-Profiles:'/ &
	1509	' Output every ',F8.2,' s')
[151]	1510	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1511	' Averaging input every ',F8.2,' s')
	1512	330 FORMAT (//' Data output:'/ &
	1513	' -----------'/)
	1514	331 FORMAT (/' 1D-Profiles:')
	1515	332 FORMAT (/' ',A)
	1516	333 FORMAT (' Output every ',F8.2,' s',/ &
	1517	' Time averaged over ',F8.2,' s'/ &
	1518	' Averaging input every ',F8.2,' s')
	1519	334 FORMAT (/' 2D-Arrays',A,':')
	1520	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1521	' Output every ',F8.2,' s ',A/ &
	1522	' Cross sections at ',A1,' = ',A/ &
	1523	' scalar-coordinates: ',A,' m'/)
	1524	336 FORMAT (/' 3D-Arrays',A,':')
	1525	337 FORMAT (/' Arrays: ',A/ &
	1526	' Output every ',F8.2,' s ',A/ &
	1527	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1528	338 FORMAT (' Compressed data output'/ &
	1529	' Decimal precision: ',A/)
	1530	339 FORMAT (' No output during initial ',F8.2,' s')
	1531	340 FORMAT (/' Time series:')
	1532	341 FORMAT (' Output every ',F8.2,' s'/)
	1533	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1534	' Output every ',F8.2,' s ',A/ &
	1535	' Time averaged over ',F8.2,' s'/ &
	1536	' Averaging input every ',F8.2,' s'/ &
	1537	' Cross sections at ',A1,' = ',A/ &
	1538	' scalar-coordinates: ',A,' m'/)
	1539	343 FORMAT (/' Arrays: ',A/ &
	1540	' Output every ',F8.2,' s ',A/ &
	1541	' Time averaged over ',F8.2,' s'/ &
	1542	' Averaging input every ',F8.2,' s'/ &
	1543	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1544	345 FORMAT (' Output format: ',A/)
	1545	#if defined( __dvrp_graphics )
	1546	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1547	' Output every ',F7.1,' s'/ &
	1548	' Output mode: ',A/ &
	1549	' Host / User: ',A,' / ',A/ &
	1550	' Directory: ',A// &
	1551	' The sequence contains:')
	1552	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1553	362 FORMAT (' Sectional plane ',A)
	1554	363 FORMAT (' Particles')
[237]	1555	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
[1]	1556	#endif
	1557	#if defined( __spectra )
	1558	370 FORMAT (' Spectra:')
	1559	371 FORMAT (' Output every ',F7.1,' s'/)
	1560	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1561	' Directions: ', 10(A5,',')/ &
[189]	1562	' height levels k = ', 20(I3,',')/ &
	1563	' ', 20(I3,',')/ &
	1564	' ', 20(I3,',')/ &
	1565	' ', 20(I3,',')/ &
	1566	' ', 19(I3,','),I3,'.'/ &
[1]	1567	' height levels selected for standard plot:'/ &
[189]	1568	' k = ', 20(I3,',')/ &
	1569	' ', 20(I3,',')/ &
	1570	' ', 20(I3,',')/ &
	1571	' ', 20(I3,',')/ &
	1572	' ', 19(I3,','),I3,'.'/ &
[1]	1573	' Time averaged over ', F7.1, ' s,' / &
	1574	' Profiles for the time averaging are taken every ', &
	1575	F6.1,' s')
	1576	#endif
	1577	400 FORMAT (//' Physical quantities:'/ &
	1578	' -------------------'/)
	1579	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1580	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1581	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1582	' f* = ',F9.6,' 1/s')
	1583	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1584	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1585	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1586	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1587	' ------------------------'/)
[57]	1588	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1589	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1590	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1591	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1592	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1593	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1594	' Height: ',A,' m'/ &
	1595	' Temperature: ',A,' K'/ &
	1596	' Gradient: ',A,' K/100m'/ &
	1597	' Gridpoint: ',A)
	1598	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1599	' Height: ',A,' m'/ &
	1600	' Humidity: ',A,' kg/kg'/ &
	1601	' Gradient: ',A,' (kg/kg)/100m'/ &
	1602	' Gridpoint: ',A)
	1603	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1604	' Height: ',A,' m'/ &
	1605	' Scalar concentration: ',A,' kg/m**3'/ &
	1606	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1607	' Gridpoint: ',A)
	1608	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1609	' Height: ',A,' m'/ &
	1610	' ug: ',A,' m/s'/ &
	1611	' Gradient: ',A,' 1/100s'/ &
	1612	' Gridpoint: ',A)
	1613	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1614	' Height: ',A,' m'/ &
[97]	1615	' vg: ',A,' m/s'/ &
[1]	1616	' Gradient: ',A,' 1/100s'/ &
	1617	' Gridpoint: ',A)
[97]	1618	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1619	' Height: ',A,' m'/ &
	1620	' Salinity: ',A,' psu'/ &
	1621	' Gradient: ',A,' psu/100m'/ &
	1622	' Gridpoint: ',A)
[1]	1623	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1624	' ---------------------------'/)
	1625	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1626	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1627	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1628	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1629	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1630	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1631	470 FORMAT (//' Actions during the simulation:'/ &
	1632	' -----------------------------'/)
[94]	1633	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1634	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1635	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1636	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1637	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1638	' to i/j =',I4)
	1639	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1640	1X,F5.3, ' m2/s2')
	1641	474 FORMAT (' Random number generator used : ',A/)
	1642	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1643	'respectively, if'/ &
	1644	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1645	' 3D-simulation'/)
	1646	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1647	'respectively, if the'/ &
	1648	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1649	' the 3D-simulation'/)
	1650	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1651	'respectively, if the'/ &
	1652	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1653	' the 3D-simulation'/)
	1654	480 FORMAT (' Particles:'/ &
	1655	' ---------'// &
	1656	' Particle advection is active (switched on at t = ', F7.1, &
	1657	' s)'/ &
	1658	' Start of new particle generations every ',F6.1,' s'/ &
	1659	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1660	' bottom: ', A, ' top: ', A/&
	1661	' Maximum particle age: ',F9.1,' s'/ &
[117]	1662	' Advection stopped at t = ',F9.1,' s'/ &
	1663	' Particles are sorted every ',F9.1,' s'/)
[1]	1664	481 FORMAT (' Particles have random start positions'/)
	1665	482 FORMAT (' Particles are advected only horizontally'/)
	1666	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1667	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1668	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1669	' Maximum age of the end of the tail: ',F8.2,' s')
	1670	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1671	486 FORMAT (' Particle statistics are written on file'/)
	1672	487 FORMAT (' Number of particle groups: ',I2/)
	1673	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1674	' minimum timestep for advection: ', F7.5/)
	1675	489 FORMAT (' Number of particles simultaneously released at each ', &
	1676	'point: ', I5/)
	1677	490 FORMAT (' Particle group ',I2,':'/ &
	1678	' Particle radius: ',E10.3, 'm')
	1679	491 FORMAT (' Particle inertia is activated'/ &
	1680	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1681	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1682	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1683	' y:',F8.1,' - ',F8.1,' m'/&
	1684	' z:',F8.1,' - ',F8.1,' m'/&
	1685	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1686	' m dz = ',F8.1,' m'/)
	1687	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1688	F8.2,' s'/)
	1689	495 FORMAT (' Number of particles in total domain: ',I10/)
	1690	500 FORMAT (//' 1D-Model parameters:'/ &
	1691	' -------------------'// &
	1692	' Simulation time: ',F8.1,' s'/ &
	1693	' Run-controll output every: ',F8.1,' s'/ &
	1694	' Vertical profile output every: ',F8.1,' s'/ &
	1695	' Mixing length calculation: ',A/ &
	1696	' Dissipation calculation: ',A/)
	1697	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1698
	1699
	1700	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |