Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 236

Last change on this file since 236 was 226, checked in by raasch, 16 years ago
preparations for the next release
Property svn:keywords set to `Id`
File size: 63.2 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[226]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 226 2009-02-02 07:39:34Z letzel $
[39]	11	!
[226]	12	! 206 2008-10-13 14:59:11Z raasch
	13	! Bugfix: error in zu index in case of section_xy = -1
	14	!
[200]	15	! 198 2008-09-17 08:55:28Z raasch
	16	! Format adjustments allowing output of larger revision numbers
	17	!
[198]	18	! 197 2008-09-16 15:29:03Z raasch
	19	! allow 100 spectra levels instead of 10 for consistency with
	20	! define_netcdf_header,
	21	! bugfix in the output of the characteristic levels of potential temperature,
	22	! geostrophic wind, scalar concentration, humidity and leaf area density,
	23	! output of turbulence recycling informations
	24	!
[139]	25	! 138 2007-11-28 10:03:58Z letzel
	26	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	27	! Allow two instead of one digit to specify isosurface and slicer variables.
	28	! Output of sorting frequency of particles
	29	!
[110]	30	! 108 2007-08-24 15:10:38Z letzel
	31	! Output of informations for coupled model runs (boundary conditions etc.)
	32	! + output of momentumfluxes at the top boundary
	33	! Rayleigh damping for ocean, e_init
	34	!
[98]	35	! 97 2007-06-21 08:23:15Z raasch
	36	! Adjustments for the ocean version.
	37	! use_pt_reference renamed use_reference
	38	!
[90]	39	! 87 2007-05-22 15:46:47Z raasch
	40	! Bugfix: output of use_upstream_for_tke
	41	!
[83]	42	! 82 2007-04-16 15:40:52Z raasch
	43	! Preprocessor strings for different linux clusters changed to "lc",
	44	! routine local_flush is used for buffer flushing
	45	!
[77]	46	! 76 2007-03-29 00:58:32Z raasch
	47	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	48	! output of the loop optimization method, moisture renamed humidity,
	49	! output of subversion revision number
	50	!
[39]	51	! 19 2007-02-23 04:53:48Z raasch
	52	! Output of scalar flux applied at top boundary
	53	!
[3]	54	! RCS Log replace by Id keyword, revision history cleaned up
	55	!
[1]	56	! Revision 1.63 2006/08/22 13:53:13 raasch
	57	! Output of dz_max
	58	!
	59	! Revision 1.1 1997/08/11 06:17:20 raasch
	60	! Initial revision
	61	!
	62	!
	63	! Description:
	64	! ------------
	65	! Writing a header with all important informations about the actual run.
	66	! This subroutine is called three times, two times at the beginning
	67	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	68	! end of the run, then writing additional information about CPU-usage on file
	69	! header.
	70	!------------------------------------------------------------------------------!
	71
	72	USE arrays_3d
	73	USE control_parameters
	74	USE cloud_parameters
	75	USE cpulog
	76	USE dvrp_variables
	77	USE grid_variables
	78	USE indices
	79	USE model_1d
	80	USE particle_attributes
	81	USE pegrid
	82	USE spectrum
	83
	84	IMPLICIT NONE
	85
	86	CHARACTER (LEN=1) :: prec
	87	CHARACTER (LEN=2) :: do2d_mode
	88	CHARACTER (LEN=5) :: section_chr
	89	CHARACTER (LEN=9) :: time_to_string
	90	CHARACTER (LEN=10) :: coor_chr, host_chr
	91	CHARACTER (LEN=16) :: begin_chr
[200]	92	CHARACTER (LEN=23) :: ver_rev
[1]	93	CHARACTER (LEN=40) :: output_format
[167]	94	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	95	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	96	run_classification
	97	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	98	temperatures, ugcomponent, vgcomponent
[1]	99	CHARACTER (LEN=85) :: roben, runten
	100
	101	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	102	REAL :: cpuseconds_per_simulated_second
	103
	104	!
	105	!-- Open the output file. At the end of the simulation, output is directed
	106	!-- to unit 19.
	107	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	108	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	109	io = 15 ! header output on file RUN_CONTROL
	110	ELSE
	111	io = 19 ! header output on file HEADER
	112	ENDIF
	113	CALL check_open( io )
	114
	115	!
	116	!-- At the end of the run, output file (HEADER) will be rewritten with
	117	!-- new informations
	118	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	119
	120	!
	121	!-- Determine kind of model run
	122	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	123	run_classification = '3D - restart run'
[147]	124	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	125	run_classification = '3D - run using 3D - prerun data'
	126	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	127	run_classification = '3D - run without 1D - prerun'
[197]	128	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	129	run_classification = '3D - run with 1D - prerun'
[197]	130	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	131	run_classification = '3D - run initialized by user'
[1]	132	ELSE
[147]	133	PRINT*,'+++ header: unknown action(s): ',initializing_actions
[1]	134	ENDIF
[97]	135	IF ( ocean ) THEN
	136	run_classification = 'ocean - ' // run_classification
	137	ELSE
	138	run_classification = 'atmosphere - ' // run_classification
	139	ENDIF
[1]	140
	141	!
	142	!-- Run-identification, date, time, host
	143	host_chr = host(1:10)
[75]	144	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	145	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	146	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	147	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	148	ADJUSTR( host_chr )
[1]	149	#if defined( __parallel )
	150	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	151	char1 = 'calculated'
	152	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	153	host(1:2) == 'lc' ) .AND. &
	154	npex == -1 .AND. pdims(2) == 1 ) THEN
	155	char1 = 'forced'
	156	ELSE
	157	char1 = 'predefined'
	158	ENDIF
	159	IF ( threads_per_task == 1 ) THEN
[102]	160	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	161	ELSE
[102]	162	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	163	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	164	ENDIF
	165	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	166	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	167	npex == -1 .AND. pdims(2) == 1 ) &
	168	THEN
[102]	169	WRITE ( io, 106 )
[1]	170	ELSEIF ( pdims(2) == 1 ) THEN
[102]	171	WRITE ( io, 107 ) 'x'
[1]	172	ELSEIF ( pdims(1) == 1 ) THEN
[102]	173	WRITE ( io, 107 ) 'y'
[1]	174	ENDIF
[102]	175	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	176	#endif
	177	WRITE ( io, 99 )
	178
	179	!
	180	!-- Numerical schemes
	181	WRITE ( io, 110 )
	182	IF ( psolver(1:7) == 'poisfft' ) THEN
	183	WRITE ( io, 111 ) TRIM( fft_method )
	184	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	185	ELSEIF ( psolver == 'sor' ) THEN
	186	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	187	ELSEIF ( psolver == 'multigrid' ) THEN
	188	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	189	IF ( mg_cycles == -1 ) THEN
	190	WRITE ( io, 140 ) residual_limit
	191	ELSE
	192	WRITE ( io, 141 ) mg_cycles
	193	ENDIF
	194	IF ( mg_switch_to_pe0_level == 0 ) THEN
	195	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	196	nzt_mg(1)
[197]	197	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	198	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	199	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	200	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	201	nzt_mg(mg_switch_to_pe0_level), &
	202	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	203	nzt_mg(1)
	204	ENDIF
	205	ENDIF
	206	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	207	THEN
	208	WRITE ( io, 142 )
	209	ENDIF
	210
	211	IF ( momentum_advec == 'pw-scheme' ) THEN
	212	WRITE ( io, 113 )
	213	ELSE
	214	WRITE ( io, 114 )
	215	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	216	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	217	overshoot_limit_w /= 0.0 ) THEN
	218	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	219	overshoot_limit_w
	220	ENDIF
	221	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	222	ups_limit_w /= 0.0 ) &
	223	THEN
	224	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	225	ENDIF
	226	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	227	ENDIF
	228	IF ( scalar_advec == 'pw-scheme' ) THEN
	229	WRITE ( io, 116 )
	230	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	231	WRITE ( io, 117 )
	232	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	233	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	234	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	235	ENDIF
	236	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	237	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	238	ENDIF
	239	ELSE
	240	WRITE ( io, 118 )
	241	ENDIF
[63]	242
	243	WRITE ( io, 139 ) TRIM( loop_optimization )
	244
[1]	245	IF ( galilei_transformation ) THEN
	246	IF ( use_ug_for_galilei_tr ) THEN
	247	char1 = 'geostrophic wind'
	248	ELSE
	249	char1 = 'mean wind in model domain'
	250	ENDIF
	251	IF ( simulated_time_at_begin == simulated_time ) THEN
	252	char2 = 'at the start of the run'
	253	ELSE
	254	char2 = 'at the end of the run'
	255	ENDIF
	256	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	257	advected_distance_x/1000.0, advected_distance_y/1000.0
	258	ENDIF
	259	IF ( timestep_scheme == 'leapfrog' ) THEN
	260	WRITE ( io, 120 )
	261	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	262	WRITE ( io, 121 )
	263	ELSE
	264	WRITE ( io, 122 ) timestep_scheme
	265	ENDIF
[87]	266	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	267	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	268	IF ( .NOT. ocean ) THEN
	269	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	270	rayleigh_damping_factor
	271	ELSE
	272	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	273	rayleigh_damping_factor
	274	ENDIF
[1]	275	ENDIF
[75]	276	IF ( humidity ) THEN
[1]	277	IF ( .NOT. cloud_physics ) THEN
	278	WRITE ( io, 129 )
	279	ELSE
	280	WRITE ( io, 130 )
	281	WRITE ( io, 131 )
	282	IF ( radiation ) WRITE ( io, 132 )
	283	IF ( precipitation ) WRITE ( io, 133 )
	284	ENDIF
	285	ENDIF
	286	IF ( passive_scalar ) WRITE ( io, 134 )
	287	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	288	WRITE ( io, 99 )
	289
	290	!
	291	!-- Runtime and timestep informations
	292	WRITE ( io, 200 )
	293	IF ( .NOT. dt_fixed ) THEN
	294	WRITE ( io, 201 ) dt_max, cfl_factor
	295	ELSE
	296	WRITE ( io, 202 ) dt
	297	ENDIF
	298	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	299
	300	IF ( time_restart /= 9999999.9 .AND. &
	301	simulated_time_at_begin == simulated_time ) THEN
	302	IF ( dt_restart == 9999999.9 ) THEN
	303	WRITE ( io, 204 ) ' Restart at: ',time_restart
	304	ELSE
	305	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	306	ENDIF
	307	ENDIF
	308
	309	IF ( simulated_time_at_begin /= simulated_time ) THEN
	310	i = MAX ( log_point_s(10)%counts, 1 )
	311	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	312	cpuseconds_per_simulated_second = 0.0
	313	ELSE
	314	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	315	( simulated_time - &
	316	simulated_time_at_begin )
	317	ENDIF
	318	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	319	log_point_s(10)%sum / REAL( i ), &
	320	cpuseconds_per_simulated_second
	321	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	322	IF ( dt_restart == 9999999.9 ) THEN
	323	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	324	ELSE
	325	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	326	ENDIF
	327	ENDIF
	328	ENDIF
	329
	330	!
	331	!-- Computational grid
[94]	332	IF ( .NOT. ocean ) THEN
	333	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	334	IF ( dz_stretch_level_index < nzt+1 ) THEN
	335	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	336	dz_stretch_factor, dz_max
	337	ENDIF
	338	ELSE
	339	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	340	IF ( dz_stretch_level_index > 0 ) THEN
	341	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	342	dz_stretch_factor, dz_max
	343	ENDIF
[1]	344	ENDIF
	345	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	346	MIN( nnz+2, nzt+2 )
[76]	347	IF ( numprocs > 1 ) THEN
	348	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	349	WRITE ( io, 255 )
	350	ELSE
	351	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	352	ENDIF
[1]	353	ENDIF
	354	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	355
	356	!
	357	!-- Topography
	358	WRITE ( io, 270 ) topography
	359	SELECT CASE ( TRIM( topography ) )
	360
	361	CASE ( 'flat' )
	362	! no actions necessary
	363
	364	CASE ( 'single_building' )
	365	blx = INT( building_length_x / dx )
	366	bly = INT( building_length_y / dy )
	367	bh = INT( building_height / dz )
	368
	369	IF ( building_wall_left == 9999999.9 ) THEN
	370	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	371	ENDIF
	372	bxl = INT ( building_wall_left / dx + 0.5 )
	373	bxr = bxl + blx
	374
	375	IF ( building_wall_south == 9999999.9 ) THEN
	376	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	377	ENDIF
	378	bys = INT ( building_wall_south / dy + 0.5 )
	379	byn = bys + bly
	380
	381	WRITE ( io, 271 ) building_length_x, building_length_y, &
	382	building_height, bxl, bxr, bys, byn
	383
	384	END SELECT
	385
[138]	386	IF ( plant_canopy ) THEN
	387
	388	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	389	IF ( passive_scalar ) THEN
	390	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	391	leaf_surface_concentration
	392	ENDIF
[138]	393
[1]	394	!
[153]	395	!-- Heat flux at the top of vegetation
	396	WRITE ( io, 282 ) cthf
	397
	398	!
[138]	399	!-- Leaf area density profile
	400	!-- Building output strings, starting with surface value
	401	WRITE ( learde, '(F6.2)' ) lad_surface
	402	gradients = '------'
	403	slices = ' 0'
	404	coordinates = ' 0.0'
	405	i = 1
	406	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	407
	408	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	409	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	410
	411	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	412	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	413
	414	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	415	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	416
	417	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	418	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	419
	420	i = i + 1
	421	ENDDO
	422
[153]	423	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	424	TRIM( gradients ), TRIM( slices )
	425
	426	ENDIF
	427
	428	!
[1]	429	!-- Boundary conditions
	430	IF ( ibc_p_b == 0 ) THEN
	431	runten = 'p(0) = 0 \|'
	432	ELSEIF ( ibc_p_b == 1 ) THEN
	433	runten = 'p(0) = p(1) \|'
	434	ELSE
	435	runten = 'p(0) = p(1) +R\|'
	436	ENDIF
	437	IF ( ibc_p_t == 0 ) THEN
	438	roben = 'p(nzt+1) = 0 \|'
	439	ELSE
	440	roben = 'p(nzt+1) = p(nzt) \|'
	441	ENDIF
	442
	443	IF ( ibc_uv_b == 0 ) THEN
	444	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	445	ELSE
	446	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	447	ENDIF
[132]	448	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	449	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	450	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	451	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	452	ELSE
	453	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	454	ENDIF
	455
	456	IF ( ibc_pt_b == 0 ) THEN
	457	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	458	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	459	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	460	ELSEIF ( ibc_pt_b == 2 ) THEN
	461	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	462	ENDIF
	463	IF ( ibc_pt_t == 0 ) THEN
[19]	464	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	465	ELSEIF( ibc_pt_t == 1 ) THEN
	466	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	467	ELSEIF( ibc_pt_t == 2 ) THEN
	468	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	469	ENDIF
	470
	471	WRITE ( io, 300 ) runten, roben
	472
	473	IF ( .NOT. constant_diffusion ) THEN
	474	IF ( ibc_e_b == 1 ) THEN
	475	runten = 'e(0) = e(1)'
	476	ELSE
	477	runten = 'e(0) = e(1) = (u/0.1)*2'
	478	ENDIF
	479	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	480
[97]	481	WRITE ( io, 301 ) 'e', runten, roben
[1]	482
	483	ENDIF
	484
[97]	485	IF ( ocean ) THEN
	486	runten = 'sa(0) = sa(1)'
	487	IF ( ibc_sa_t == 0 ) THEN
	488	roben = 'sa(nzt+1) = sa_surface'
[1]	489	ELSE
[97]	490	roben = 'sa(nzt+1) = sa(nzt)'
[1]	491	ENDIF
[97]	492	WRITE ( io, 301 ) 'sa', runten, roben
	493	ENDIF
[1]	494
[97]	495	IF ( humidity ) THEN
	496	IF ( ibc_q_b == 0 ) THEN
	497	runten = 'q(0) = q_surface'
	498	ELSE
	499	runten = 'q(0) = q(1)'
	500	ENDIF
	501	IF ( ibc_q_t == 0 ) THEN
	502	roben = 'q(nzt) = q_top'
	503	ELSE
	504	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	505	ENDIF
	506	WRITE ( io, 301 ) 'q', runten, roben
	507	ENDIF
[1]	508
[97]	509	IF ( passive_scalar ) THEN
	510	IF ( ibc_q_b == 0 ) THEN
	511	runten = 's(0) = s_surface'
	512	ELSE
	513	runten = 's(0) = s(1)'
	514	ENDIF
	515	IF ( ibc_q_t == 0 ) THEN
	516	roben = 's(nzt) = s_top'
	517	ELSE
	518	roben = 's(nzt) = s(nzt-1) + ds/dz'
	519	ENDIF
	520	WRITE ( io, 301 ) 's', runten, roben
[1]	521	ENDIF
	522
	523	IF ( use_surface_fluxes ) THEN
	524	WRITE ( io, 303 )
	525	IF ( constant_heatflux ) THEN
	526	WRITE ( io, 306 ) surface_heatflux
	527	IF ( random_heatflux ) WRITE ( io, 307 )
	528	ENDIF
[75]	529	IF ( humidity .AND. constant_waterflux ) THEN
[1]	530	WRITE ( io, 311 ) surface_waterflux
	531	ENDIF
	532	IF ( passive_scalar .AND. constant_waterflux ) THEN
	533	WRITE ( io, 313 ) surface_waterflux
	534	ENDIF
	535	ENDIF
	536
[19]	537	IF ( use_top_fluxes ) THEN
	538	WRITE ( io, 304 )
[102]	539	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	540	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	541	IF ( constant_top_heatflux ) THEN
	542	WRITE ( io, 306 ) top_heatflux
	543	ENDIF
	544	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	545	WRITE ( io, 316 )
[19]	546	ENDIF
[97]	547	IF ( ocean .AND. constant_top_salinityflux ) THEN
	548	WRITE ( io, 309 ) top_salinityflux
	549	ENDIF
[75]	550	IF ( humidity .OR. passive_scalar ) THEN
[19]	551	WRITE ( io, 315 )
	552	ENDIF
	553	ENDIF
	554
[1]	555	IF ( prandtl_layer ) THEN
[94]	556	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	557	rif_min, rif_max
[1]	558	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	559	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	560	WRITE ( io, 312 )
	561	ENDIF
	562	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	563	WRITE ( io, 314 )
	564	ENDIF
	565	ELSE
	566	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	567	WRITE ( io, 310 ) rif_min, rif_max
	568	ENDIF
	569	ENDIF
	570
	571	WRITE ( io, 317 ) bc_lr, bc_ns
	572	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	573	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	574	IF ( turbulent_inflow ) THEN
	575	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	576	inflow_damping_height, inflow_damping_width
	577	ENDIF
[1]	578	ENDIF
	579
	580	!
	581	!-- Listing of 1D-profiles
[151]	582	WRITE ( io, 325 ) dt_dopr_listing
[1]	583	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	584	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	585	ENDIF
	586
	587	!
	588	!-- DATA output
	589	WRITE ( io, 330 )
	590	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	591	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	592	ENDIF
	593
	594	!
	595	!-- 1D-profiles
	596	dopr_chr = 'Profile:'
	597	IF ( dopr_n /= 0 ) THEN
	598	WRITE ( io, 331 )
	599
	600	output_format = ''
	601	IF ( netcdf_output ) THEN
	602	IF ( netcdf_64bit ) THEN
	603	output_format = 'netcdf (64 bit offset)'
	604	ELSE
	605	output_format = 'netcdf'
	606	ENDIF
	607	ENDIF
	608	IF ( profil_output ) THEN
	609	IF ( netcdf_output ) THEN
	610	output_format = TRIM( output_format ) // ' and profil'
	611	ELSE
	612	output_format = 'profil'
	613	ENDIF
	614	ENDIF
	615	WRITE ( io, 345 ) output_format
	616
	617	DO i = 1, dopr_n
	618	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	619	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	620	WRITE ( io, 332 ) dopr_chr
	621	dopr_chr = ' :'
	622	ENDIF
	623	ENDDO
	624
	625	IF ( dopr_chr /= '' ) THEN
	626	WRITE ( io, 332 ) dopr_chr
	627	ENDIF
	628	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	629	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	630	ENDIF
	631
	632	!
	633	!-- 2D-arrays
	634	DO av = 0, 1
	635
	636	i = 1
	637	do2d_xy = ''
	638	do2d_xz = ''
	639	do2d_yz = ''
	640	DO WHILE ( do2d(av,i) /= ' ' )
	641
	642	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	643	do2d_mode = do2d(av,i)(l-1:l)
	644
	645	SELECT CASE ( do2d_mode )
	646	CASE ( 'xy' )
	647	ll = LEN_TRIM( do2d_xy )
	648	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	649	CASE ( 'xz' )
	650	ll = LEN_TRIM( do2d_xz )
	651	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	652	CASE ( 'yz' )
	653	ll = LEN_TRIM( do2d_yz )
	654	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	655	END SELECT
	656
	657	i = i + 1
	658
	659	ENDDO
	660
	661	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	662	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	663	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	664	( netcdf_output .OR. iso2d_output ) ) THEN
	665
	666	IF ( av == 0 ) THEN
	667	WRITE ( io, 334 ) ''
	668	ELSE
	669	WRITE ( io, 334 ) '(time-averaged)'
	670	ENDIF
	671
	672	IF ( do2d_at_begin ) THEN
	673	begin_chr = 'and at the start'
	674	ELSE
	675	begin_chr = ''
	676	ENDIF
	677
	678	output_format = ''
	679	IF ( netcdf_output ) THEN
	680	IF ( netcdf_64bit ) THEN
	681	output_format = 'netcdf (64 bit offset)'
	682	ELSE
	683	output_format = 'netcdf'
	684	ENDIF
	685	ENDIF
	686	IF ( iso2d_output ) THEN
	687	IF ( netcdf_output ) THEN
	688	output_format = TRIM( output_format ) // ' and iso2d'
	689	ELSE
	690	output_format = 'iso2d'
	691	ENDIF
	692	ENDIF
	693	WRITE ( io, 345 ) output_format
	694
	695	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	696	i = 1
	697	slices = '/'
	698	coordinates = '/'
	699	!
	700	!-- Building strings with index and coordinate informations of the
	701	!-- slices
	702	DO WHILE ( section(i,1) /= -9999 )
	703
	704	WRITE (section_chr,'(I5)') section(i,1)
	705	section_chr = ADJUSTL( section_chr )
	706	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	707
[206]	708	IF ( section(i,1) == -1 ) THEN
	709	WRITE (coor_chr,'(F10.1)') -1.0
	710	ELSE
	711	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	712	ENDIF
[1]	713	coor_chr = ADJUSTL( coor_chr )
	714	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	715
	716	i = i + 1
	717	ENDDO
	718	IF ( av == 0 ) THEN
	719	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	720	TRIM( begin_chr ), 'k', TRIM( slices ), &
	721	TRIM( coordinates )
	722	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	723	WRITE ( io, 339 ) skip_time_do2d_xy
	724	ENDIF
	725	ELSE
	726	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	727	TRIM( begin_chr ), averaging_interval, &
	728	dt_averaging_input, 'k', TRIM( slices ), &
	729	TRIM( coordinates )
	730	IF ( skip_time_data_output_av /= 0.0 ) THEN
	731	WRITE ( io, 339 ) skip_time_data_output_av
	732	ENDIF
	733	ENDIF
	734
	735	ENDIF
	736
	737	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	738	i = 1
	739	slices = '/'
	740	coordinates = '/'
	741	!
	742	!-- Building strings with index and coordinate informations of the
	743	!-- slices
	744	DO WHILE ( section(i,2) /= -9999 )
	745
	746	WRITE (section_chr,'(I5)') section(i,2)
	747	section_chr = ADJUSTL( section_chr )
	748	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	749
	750	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	751	coor_chr = ADJUSTL( coor_chr )
	752	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	753
	754	i = i + 1
	755	ENDDO
	756	IF ( av == 0 ) THEN
	757	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	758	TRIM( begin_chr ), 'j', TRIM( slices ), &
	759	TRIM( coordinates )
	760	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	761	WRITE ( io, 339 ) skip_time_do2d_xz
	762	ENDIF
	763	ELSE
	764	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	765	TRIM( begin_chr ), averaging_interval, &
	766	dt_averaging_input, 'j', TRIM( slices ), &
	767	TRIM( coordinates )
	768	IF ( skip_time_data_output_av /= 0.0 ) THEN
	769	WRITE ( io, 339 ) skip_time_data_output_av
	770	ENDIF
	771	ENDIF
	772	ENDIF
	773
	774	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	775	i = 1
	776	slices = '/'
	777	coordinates = '/'
	778	!
	779	!-- Building strings with index and coordinate informations of the
	780	!-- slices
	781	DO WHILE ( section(i,3) /= -9999 )
	782
	783	WRITE (section_chr,'(I5)') section(i,3)
	784	section_chr = ADJUSTL( section_chr )
	785	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	786
	787	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	788	coor_chr = ADJUSTL( coor_chr )
	789	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	790
	791	i = i + 1
	792	ENDDO
	793	IF ( av == 0 ) THEN
	794	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	795	TRIM( begin_chr ), 'i', TRIM( slices ), &
	796	TRIM( coordinates )
	797	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	798	WRITE ( io, 339 ) skip_time_do2d_yz
	799	ENDIF
	800	ELSE
	801	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	802	TRIM( begin_chr ), averaging_interval, &
	803	dt_averaging_input, 'i', TRIM( slices ), &
	804	TRIM( coordinates )
	805	IF ( skip_time_data_output_av /= 0.0 ) THEN
	806	WRITE ( io, 339 ) skip_time_data_output_av
	807	ENDIF
	808	ENDIF
	809	ENDIF
	810
	811	ENDIF
	812
	813	ENDDO
	814
	815	!
	816	!-- 3d-arrays
	817	DO av = 0, 1
	818
	819	i = 1
	820	do3d_chr = ''
	821	DO WHILE ( do3d(av,i) /= ' ' )
	822
	823	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	824	i = i + 1
	825
	826	ENDDO
	827
	828	IF ( do3d_chr /= '' ) THEN
	829	IF ( av == 0 ) THEN
	830	WRITE ( io, 336 ) ''
	831	ELSE
	832	WRITE ( io, 336 ) '(time-averaged)'
	833	ENDIF
	834
	835	output_format = ''
	836	IF ( netcdf_output ) THEN
[46]	837	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	838	output_format = 'netcdf (64 bit offset)'
	839	ELSE
	840	output_format = 'netcdf'
	841	ENDIF
	842	ENDIF
	843	IF ( avs_output ) THEN
	844	IF ( netcdf_output ) THEN
	845	output_format = TRIM( output_format ) // ' and avs'
	846	ELSE
	847	output_format = 'avs'
	848	ENDIF
	849	ENDIF
	850	WRITE ( io, 345 ) output_format
	851
	852	IF ( do3d_at_begin ) THEN
	853	begin_chr = 'and at the start'
	854	ELSE
	855	begin_chr = ''
	856	ENDIF
	857	IF ( av == 0 ) THEN
	858	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	859	zu(nz_do3d), nz_do3d
	860	ELSE
	861	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	862	TRIM( begin_chr ), averaging_interval, &
	863	dt_averaging_input, zu(nz_do3d), nz_do3d
	864	ENDIF
	865
	866	IF ( do3d_compress ) THEN
	867	do3d_chr = ''
	868	i = 1
	869	DO WHILE ( do3d(av,i) /= ' ' )
	870
	871	SELECT CASE ( do3d(av,i) )
	872	CASE ( 'u' )
	873	j = 1
	874	CASE ( 'v' )
	875	j = 2
	876	CASE ( 'w' )
	877	j = 3
	878	CASE ( 'p' )
	879	j = 4
	880	CASE ( 'pt' )
	881	j = 5
	882	END SELECT
	883	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	884	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	885	':' // prec // ','
	886	i = i + 1
	887
	888	ENDDO
	889	WRITE ( io, 338 ) do3d_chr
	890
	891	ENDIF
	892
	893	IF ( av == 0 ) THEN
	894	IF ( skip_time_do3d /= 0.0 ) THEN
	895	WRITE ( io, 339 ) skip_time_do3d
	896	ENDIF
	897	ELSE
	898	IF ( skip_time_data_output_av /= 0.0 ) THEN
	899	WRITE ( io, 339 ) skip_time_data_output_av
	900	ENDIF
	901	ENDIF
	902
	903	ENDIF
	904
	905	ENDDO
	906
	907	!
	908	!-- Timeseries
	909	IF ( dt_dots /= 9999999.9 ) THEN
	910	WRITE ( io, 340 )
	911
	912	output_format = ''
	913	IF ( netcdf_output ) THEN
	914	IF ( netcdf_64bit ) THEN
	915	output_format = 'netcdf (64 bit offset)'
	916	ELSE
	917	output_format = 'netcdf'
	918	ENDIF
	919	ENDIF
	920	IF ( profil_output ) THEN
	921	IF ( netcdf_output ) THEN
	922	output_format = TRIM( output_format ) // ' and profil'
	923	ELSE
	924	output_format = 'profil'
	925	ENDIF
	926	ENDIF
	927	WRITE ( io, 345 ) output_format
	928	WRITE ( io, 341 ) dt_dots
	929	ENDIF
	930
	931	#if defined( __dvrp_graphics )
	932	!
	933	!-- Dvrp-output
	934	IF ( dt_dvrp /= 9999999.9 ) THEN
	935	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	936	TRIM( dvrp_username ), TRIM( dvrp_directory )
	937	i = 1
	938	l = 0
	939	DO WHILE ( mode_dvrp(i) /= ' ' )
	940	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	941	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	942	l = l + 1
	943	IF ( do3d(0,j) /= ' ' ) THEN
	944	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	945	ENDIF
	946	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	947	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	948	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	949	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	950	WRITE ( io, 363 )
	951	ENDIF
	952	i = i + 1
	953	ENDDO
	954	ENDIF
	955	#endif
	956
	957	#if defined( __spectra )
	958	!
	959	!-- Spectra output
	960	IF ( dt_dosp /= 9999999.9 ) THEN
	961	WRITE ( io, 370 )
	962
	963	output_format = ''
	964	IF ( netcdf_output ) THEN
	965	IF ( netcdf_64bit ) THEN
	966	output_format = 'netcdf (64 bit offset)'
	967	ELSE
	968	output_format = 'netcdf'
	969	ENDIF
	970	ENDIF
	971	IF ( profil_output ) THEN
	972	IF ( netcdf_output ) THEN
	973	output_format = TRIM( output_format ) // ' and profil'
	974	ELSE
	975	output_format = 'profil'
	976	ENDIF
	977	ENDIF
	978	WRITE ( io, 345 ) output_format
	979	WRITE ( io, 371 ) dt_dosp
	980	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	981	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	982	( spectra_direction(i), i = 1,10 ), &
[189]	983	( comp_spectra_level(i), i = 1,100 ), &
	984	( plot_spectra_level(i), i = 1,100 ), &
[1]	985	averaging_interval_sp, dt_averaging_input_pr
	986	ENDIF
	987	#endif
	988
	989	WRITE ( io, 99 )
	990
	991	!
	992	!-- Physical quantities
	993	WRITE ( io, 400 )
	994
	995	!
	996	!-- Geostrophic parameters
	997	WRITE ( io, 410 ) omega, phi, f, fs
	998
	999	!
	1000	!-- Other quantities
	1001	WRITE ( io, 411 ) g
[97]	1002	IF ( use_reference ) THEN
	1003	IF ( ocean ) THEN
	1004	WRITE ( io, 412 ) prho_reference
	1005	ELSE
	1006	WRITE ( io, 413 ) pt_reference
	1007	ENDIF
	1008	ENDIF
[1]	1009
	1010	!
	1011	!-- Cloud physics parameters
	1012	IF ( cloud_physics ) THEN
[57]	1013	WRITE ( io, 415 )
	1014	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1015	ENDIF
	1016
	1017	!-- Profile of the geostrophic wind (component ug)
	1018	!-- Building output strings
	1019	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1020	gradients = '------'
	1021	slices = ' 0'
	1022	coordinates = ' 0.0'
	1023	i = 1
	1024	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1025
[167]	1026	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1027	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1028
[167]	1029	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1030	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1031
[167]	1032	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1033	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1034
[167]	1035	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1036	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1037
	1038	i = i + 1
	1039	ENDDO
	1040
	1041	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1042	TRIM( gradients ), TRIM( slices )
	1043
	1044	!-- Profile of the geostrophic wind (component vg)
	1045	!-- Building output strings
	1046	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1047	gradients = '------'
	1048	slices = ' 0'
	1049	coordinates = ' 0.0'
	1050	i = 1
	1051	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1052
[167]	1053	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1054	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1055
[167]	1056	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1057	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1058
[167]	1059	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1060	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1061
[167]	1062	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1063	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1064
	1065	i = i + 1
	1066	ENDDO
	1067
	1068	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1069	TRIM( gradients ), TRIM( slices )
	1070
	1071	!
	1072	!-- Initial temperature profile
	1073	!-- Building output strings, starting with surface temperature
	1074	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1075	gradients = '------'
	1076	slices = ' 0'
	1077	coordinates = ' 0.0'
	1078	i = 1
	1079	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1080
[94]	1081	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1082	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1083
[94]	1084	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1085	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1086
[94]	1087	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1088	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1089
[94]	1090	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1091	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1092
	1093	i = i + 1
	1094	ENDDO
	1095
	1096	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1097	TRIM( gradients ), TRIM( slices )
	1098
	1099	!
	1100	!-- Initial humidity profile
	1101	!-- Building output strings, starting with surface humidity
[75]	1102	IF ( humidity .OR. passive_scalar ) THEN
[1]	1103	WRITE ( temperatures, '(E8.1)' ) q_surface
	1104	gradients = '--------'
	1105	slices = ' 0'
	1106	coordinates = ' 0.0'
	1107	i = 1
	1108	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1109
	1110	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1111	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1112
	1113	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1114	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1115
	1116	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1117	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1118
	1119	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1120	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1121
	1122	i = i + 1
	1123	ENDDO
	1124
[75]	1125	IF ( humidity ) THEN
[1]	1126	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1127	TRIM( gradients ), TRIM( slices )
	1128	ELSE
	1129	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1130	TRIM( gradients ), TRIM( slices )
	1131	ENDIF
	1132	ENDIF
	1133
	1134	!
[97]	1135	!-- Initial salinity profile
	1136	!-- Building output strings, starting with surface salinity
	1137	IF ( ocean ) THEN
	1138	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1139	gradients = '------'
	1140	slices = ' 0'
	1141	coordinates = ' 0.0'
	1142	i = 1
	1143	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1144
	1145	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1146	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1147
	1148	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1149	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1150
	1151	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1152	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1153
	1154	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1155	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1156
	1157	i = i + 1
	1158	ENDDO
	1159
	1160	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1161	TRIM( gradients ), TRIM( slices )
	1162	ENDIF
	1163
	1164	!
[1]	1165	!-- LES / turbulence parameters
	1166	WRITE ( io, 450 )
	1167
	1168	!--
	1169	! ... LES-constants used must still be added here
	1170	!--
	1171	IF ( constant_diffusion ) THEN
	1172	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1173	prandtl_number
	1174	ENDIF
	1175	IF ( .NOT. constant_diffusion) THEN
[108]	1176	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1177	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1178	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1179	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1180	ENDIF
	1181
	1182	!
	1183	!-- Special actions during the run
	1184	WRITE ( io, 470 )
	1185	IF ( create_disturbances ) THEN
	1186	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1187	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1188	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1189	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1190	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1191	ELSE
	1192	WRITE ( io, 473 ) disturbance_energy_limit
	1193	ENDIF
	1194	WRITE ( io, 474 ) TRIM( random_generator )
	1195	ENDIF
	1196	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1197	WRITE ( io, 475 ) pt_surface_initial_change
	1198	ENDIF
[75]	1199	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1200	WRITE ( io, 476 ) q_surface_initial_change
	1201	ENDIF
	1202	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1203	WRITE ( io, 477 ) q_surface_initial_change
	1204	ENDIF
	1205
[60]	1206	IF ( particle_advection ) THEN
[1]	1207	!
[60]	1208	!-- Particle attributes
	1209	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1210	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1211	end_time_prel, dt_sort_particles
[60]	1212	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1213	IF ( random_start_position ) WRITE ( io, 481 )
	1214	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1215	WRITE ( io, 495 ) total_number_of_particles
	1216	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1217	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1218	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1219	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1220	WRITE ( io, 484 ) total_number_of_tails, &
	1221	minimum_tailpoint_distance, &
	1222	maximum_tailpoint_age
	1223	ENDIF
[1]	1224	ENDIF
[60]	1225	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1226	WRITE ( io, 485 ) dt_write_particle_data
	1227	output_format = ''
	1228	IF ( netcdf_output ) THEN
	1229	IF ( netcdf_64bit ) THEN
	1230	output_format = 'netcdf (64 bit offset) and binary'
	1231	ELSE
	1232	output_format = 'netcdf and binary'
	1233	ENDIF
[1]	1234	ELSE
[60]	1235	output_format = 'binary'
[1]	1236	ENDIF
[60]	1237	WRITE ( io, 345 ) output_format
[1]	1238	ENDIF
[60]	1239	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1240	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1241
[60]	1242	WRITE ( io, 487 ) number_of_particle_groups
[1]	1243
[60]	1244	DO i = 1, number_of_particle_groups
	1245	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1246	WRITE ( io, 490 ) i, 0.0
	1247	WRITE ( io, 492 )
[1]	1248	ELSE
[60]	1249	WRITE ( io, 490 ) i, radius(i)
	1250	IF ( density_ratio(i) /= 0.0 ) THEN
	1251	WRITE ( io, 491 ) density_ratio(i)
	1252	ELSE
	1253	WRITE ( io, 492 )
	1254	ENDIF
[1]	1255	ENDIF
[60]	1256	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1257	pdx(i), pdy(i), pdz(i)
	1258	ENDDO
[1]	1259
[60]	1260	ENDIF
[1]	1261
[60]	1262
[1]	1263	!
	1264	!-- Parameters of 1D-model
	1265	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1266	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1267	mixing_length_1d, dissipation_1d
	1268	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1269	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1270	ENDIF
	1271	ENDIF
	1272
	1273	!
	1274	!-- User-defined informations
	1275	CALL user_header( io )
	1276
	1277	WRITE ( io, 99 )
	1278
	1279	!
	1280	!-- Write buffer contents to disc immediately
[82]	1281	CALL local_flush( io )
[1]	1282
	1283	!
	1284	!-- Here the FORMATs start
	1285
	1286	99 FORMAT (1X,78('-'))
[200]	1287	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1288	1X,'* ',A,' *',9X,A/ &
	1289	1X,'***************************',9X,42('-'))
[102]	1290	101 FORMAT (37X,'coupled run: ',A/ &
	1291	37X,42('-'))
[200]	1292	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1293	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1294	' Run on host: ',A10)
[1]	1295	#if defined( __parallel )
[200]	1296	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1297	')',1X,A)
[200]	1298	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1299	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1300	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1301	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1302	37X,'because the job is running on an SMP-cluster')
[102]	1303	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1304	#endif
	1305	110 FORMAT (/' Numerical Schemes:'/ &
	1306	' -----------------'/)
	1307	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1308	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1309	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1310	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1311	' or Upstream')
	1312	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1313	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1314	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1315	' or Upstream')
	1316	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1317	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1318	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1319	' Translation velocity = ',A/ &
	1320	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1321	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1322	' of timestep changes)')
	1323	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1324	' timestep changes')
	1325	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1326	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1327	' maximum damping coefficient: ',F5.3, ' 1/s')
	1328	124 FORMAT (' Spline-overshoots are being suppressed')
	1329	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1330	' of'/ &
	1331	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1332	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1333	' of'/ &
	1334	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1335	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1336	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1337	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1338	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1339	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1340	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1341	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1342	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1343	' effective emissivity scheme')
	1344	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1345	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1346	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1347	A,'-cycle)'/ &
	1348	' number of grid levels: ',I2/ &
	1349	' Gauss-Seidel red/black iterations: ',I2)
	1350	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1351	I3,')')
	1352	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1353	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1354	I3,')'/ &
	1355	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1356	I3,')')
	1357	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1358	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1359	140 FORMAT (' maximum residual allowed: ',E10.3)
	1360	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1361	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1362	'step')
[87]	1363	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1364	'kinetic energy')
[1]	1365	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1366	'conserved')
	1367	200 FORMAT (//' Run time and time step information:'/ &
	1368	' ----------------------------------'/)
	1369	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1370	' CFL-factor: ',F4.2)
	1371	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1372	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1373	' End time: ',F9.3,' s')
	1374	204 FORMAT ( A,F9.3,' s')
	1375	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1376	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1377	' CPU-time used: ',F9.3,' s per timestep: ', &
	1378	' ',F9.3,' s'/ &
	1379	' per second of simulated tim', &
	1380	'e: ',F9.3,' s')
	1381	250 FORMAT (//' Computational grid and domain size:'/ &
	1382	' ----------------------------------'// &
	1383	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1384	' m dz = ',F7.3,' m'/ &
	1385	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1386	' m z(u) = ',F10.3,' m'/)
	1387	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1388	' factor: ',F5.3/ &
	1389	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1390	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1391	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1392	255 FORMAT (' Subdomains have equal size')
	1393	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1394	'have smaller sizes'/ &
	1395	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1396	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1397	' degrees')
	1398	270 FORMAT (//' Topography informations:'/ &
	1399	' -----------------------'// &
	1400	1X,'Topography: ',A)
	1401	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1402	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1403	' / ',I4)
[138]	1404	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1405	' ------------------------------'// &
	1406	' Canopy mode: ', A / &
	1407	' Canopy top: ',I4 / &
	1408	' Leaf drag coefficient: ',F6.2 /)
[153]	1409	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1410	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1411	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1412	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1413	' Height: ',A,' m'/ &
	1414	' Leaf area density: ',A,' m2/m3'/ &
	1415	' Gradient: ',A,' m2/m4'/ &
	1416	' Gridpoint: ',A)
	1417
[1]	1418	300 FORMAT (//' Boundary conditions:'/ &
	1419	' -------------------'// &
	1420	' p uv ', &
	1421	' pt'// &
	1422	' B. bound.: ',A/ &
	1423	' T. bound.: ',A)
[97]	1424	301 FORMAT (/' ',A// &
[1]	1425	' B. bound.: ',A/ &
	1426	' T. bound.: ',A)
[19]	1427	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1428	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1429	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1430	'computational u,v-level:'// &
[1]	1431	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1432	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1433	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1434	307 FORMAT (' Heatflux has a random normal distribution')
	1435	308 FORMAT (' Predefined surface temperature')
[97]	1436	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1437	310 FORMAT (//' 1D-Model:'// &
	1438	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1439	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1440	312 FORMAT (' Predefined surface humidity')
	1441	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1442	314 FORMAT (' Predefined scalar value at the surface')
[19]	1443	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1444	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1445	'atmosphere model')
[1]	1446	317 FORMAT (//' Lateral boundaries:'/ &
	1447	' left/right: ',A/ &
	1448	' north/south: ',A)
	1449	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1450	'max =',F5.1,' m**2/s')
[151]	1451	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1452	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1453	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1454	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1455	' v: ',F9.6,' m2/s2')
[151]	1456	325 FORMAT (//' List output:'/ &
[1]	1457	' -----------'// &
	1458	' 1D-Profiles:'/ &
	1459	' Output every ',F8.2,' s')
[151]	1460	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1461	' Averaging input every ',F8.2,' s')
	1462	330 FORMAT (//' Data output:'/ &
	1463	' -----------'/)
	1464	331 FORMAT (/' 1D-Profiles:')
	1465	332 FORMAT (/' ',A)
	1466	333 FORMAT (' Output every ',F8.2,' s',/ &
	1467	' Time averaged over ',F8.2,' s'/ &
	1468	' Averaging input every ',F8.2,' s')
	1469	334 FORMAT (/' 2D-Arrays',A,':')
	1470	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1471	' Output every ',F8.2,' s ',A/ &
	1472	' Cross sections at ',A1,' = ',A/ &
	1473	' scalar-coordinates: ',A,' m'/)
	1474	336 FORMAT (/' 3D-Arrays',A,':')
	1475	337 FORMAT (/' Arrays: ',A/ &
	1476	' Output every ',F8.2,' s ',A/ &
	1477	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1478	338 FORMAT (' Compressed data output'/ &
	1479	' Decimal precision: ',A/)
	1480	339 FORMAT (' No output during initial ',F8.2,' s')
	1481	340 FORMAT (/' Time series:')
	1482	341 FORMAT (' Output every ',F8.2,' s'/)
	1483	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1484	' Output every ',F8.2,' s ',A/ &
	1485	' Time averaged over ',F8.2,' s'/ &
	1486	' Averaging input every ',F8.2,' s'/ &
	1487	' Cross sections at ',A1,' = ',A/ &
	1488	' scalar-coordinates: ',A,' m'/)
	1489	343 FORMAT (/' Arrays: ',A/ &
	1490	' Output every ',F8.2,' s ',A/ &
	1491	' Time averaged over ',F8.2,' s'/ &
	1492	' Averaging input every ',F8.2,' s'/ &
	1493	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1494	345 FORMAT (' Output format: ',A/)
	1495	#if defined( __dvrp_graphics )
	1496	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1497	' Output every ',F7.1,' s'/ &
	1498	' Output mode: ',A/ &
	1499	' Host / User: ',A,' / ',A/ &
	1500	' Directory: ',A// &
	1501	' The sequence contains:')
	1502	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1503	362 FORMAT (' Sectional plane ',A)
	1504	363 FORMAT (' Particles')
	1505	#endif
	1506	#if defined( __spectra )
	1507	370 FORMAT (' Spectra:')
	1508	371 FORMAT (' Output every ',F7.1,' s'/)
	1509	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1510	' Directions: ', 10(A5,',')/ &
[189]	1511	' height levels k = ', 20(I3,',')/ &
	1512	' ', 20(I3,',')/ &
	1513	' ', 20(I3,',')/ &
	1514	' ', 20(I3,',')/ &
	1515	' ', 19(I3,','),I3,'.'/ &
[1]	1516	' height levels selected for standard plot:'/ &
[189]	1517	' k = ', 20(I3,',')/ &
	1518	' ', 20(I3,',')/ &
	1519	' ', 20(I3,',')/ &
	1520	' ', 20(I3,',')/ &
	1521	' ', 19(I3,','),I3,'.'/ &
[1]	1522	' Time averaged over ', F7.1, ' s,' / &
	1523	' Profiles for the time averaging are taken every ', &
	1524	F6.1,' s')
	1525	#endif
	1526	400 FORMAT (//' Physical quantities:'/ &
	1527	' -------------------'/)
	1528	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1529	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1530	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1531	' f* = ',F9.6,' 1/s')
	1532	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1533	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1534	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1535	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1536	' ------------------------'/)
[57]	1537	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1538	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1539	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1540	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1541	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1542	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1543	' Height: ',A,' m'/ &
	1544	' Temperature: ',A,' K'/ &
	1545	' Gradient: ',A,' K/100m'/ &
	1546	' Gridpoint: ',A)
	1547	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1548	' Height: ',A,' m'/ &
	1549	' Humidity: ',A,' kg/kg'/ &
	1550	' Gradient: ',A,' (kg/kg)/100m'/ &
	1551	' Gridpoint: ',A)
	1552	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1553	' Height: ',A,' m'/ &
	1554	' Scalar concentration: ',A,' kg/m**3'/ &
	1555	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1556	' Gridpoint: ',A)
	1557	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1558	' Height: ',A,' m'/ &
	1559	' ug: ',A,' m/s'/ &
	1560	' Gradient: ',A,' 1/100s'/ &
	1561	' Gridpoint: ',A)
	1562	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1563	' Height: ',A,' m'/ &
[97]	1564	' vg: ',A,' m/s'/ &
[1]	1565	' Gradient: ',A,' 1/100s'/ &
	1566	' Gridpoint: ',A)
[97]	1567	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1568	' Height: ',A,' m'/ &
	1569	' Salinity: ',A,' psu'/ &
	1570	' Gradient: ',A,' psu/100m'/ &
	1571	' Gridpoint: ',A)
[1]	1572	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1573	' ---------------------------'/)
	1574	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1575	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1576	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1577	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1578	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1579	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1580	470 FORMAT (//' Actions during the simulation:'/ &
	1581	' -----------------------------'/)
[94]	1582	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1583	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1584	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1585	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1586	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1587	' to i/j =',I4)
	1588	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1589	1X,F5.3, ' m2/s2')
	1590	474 FORMAT (' Random number generator used : ',A/)
	1591	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1592	'respectively, if'/ &
	1593	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1594	' 3D-simulation'/)
	1595	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1596	'respectively, if the'/ &
	1597	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1598	' the 3D-simulation'/)
	1599	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1600	'respectively, if the'/ &
	1601	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1602	' the 3D-simulation'/)
	1603	480 FORMAT (' Particles:'/ &
	1604	' ---------'// &
	1605	' Particle advection is active (switched on at t = ', F7.1, &
	1606	' s)'/ &
	1607	' Start of new particle generations every ',F6.1,' s'/ &
	1608	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1609	' bottom: ', A, ' top: ', A/&
	1610	' Maximum particle age: ',F9.1,' s'/ &
[117]	1611	' Advection stopped at t = ',F9.1,' s'/ &
	1612	' Particles are sorted every ',F9.1,' s'/)
[1]	1613	481 FORMAT (' Particles have random start positions'/)
	1614	482 FORMAT (' Particles are advected only horizontally'/)
	1615	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1616	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1617	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1618	' Maximum age of the end of the tail: ',F8.2,' s')
	1619	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1620	486 FORMAT (' Particle statistics are written on file'/)
	1621	487 FORMAT (' Number of particle groups: ',I2/)
	1622	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1623	' minimum timestep for advection: ', F7.5/)
	1624	489 FORMAT (' Number of particles simultaneously released at each ', &
	1625	'point: ', I5/)
	1626	490 FORMAT (' Particle group ',I2,':'/ &
	1627	' Particle radius: ',E10.3, 'm')
	1628	491 FORMAT (' Particle inertia is activated'/ &
	1629	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1630	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1631	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1632	' y:',F8.1,' - ',F8.1,' m'/&
	1633	' z:',F8.1,' - ',F8.1,' m'/&
	1634	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1635	' m dz = ',F8.1,' m'/)
	1636	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1637	F8.2,' s'/)
	1638	495 FORMAT (' Number of particles in total domain: ',I10/)
	1639	500 FORMAT (//' 1D-Model parameters:'/ &
	1640	' -------------------'// &
	1641	' Simulation time: ',F8.1,' s'/ &
	1642	' Run-controll output every: ',F8.1,' s'/ &
	1643	' Vertical profile output every: ',F8.1,' s'/ &
	1644	' Mixing length calculation: ',A/ &
	1645	' Dissipation calculation: ',A/)
	1646	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1647
	1648
	1649	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |