Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 200

Last change on this file since 200 was 200, checked in by raasch, 16 years ago
format adjustments in header allowing output of larger revision numbers
Property svn:keywords set to `Id`
File size: 63.0 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[198]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 200 2008-09-17 09:49:06Z raasch $
[39]	11	!
[200]	12	! 198 2008-09-17 08:55:28Z raasch
	13	! Format adjustments allowing output of larger revision numbers
	14	!
[198]	15	! 197 2008-09-16 15:29:03Z raasch
	16	! allow 100 spectra levels instead of 10 for consistency with
	17	! define_netcdf_header,
	18	! bugfix in the output of the characteristic levels of potential temperature,
	19	! geostrophic wind, scalar concentration, humidity and leaf area density,
	20	! output of turbulence recycling informations
	21	!
[139]	22	! 138 2007-11-28 10:03:58Z letzel
	23	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	24	! Allow two instead of one digit to specify isosurface and slicer variables.
	25	! Output of sorting frequency of particles
	26	!
[110]	27	! 108 2007-08-24 15:10:38Z letzel
	28	! Output of informations for coupled model runs (boundary conditions etc.)
	29	! + output of momentumfluxes at the top boundary
	30	! Rayleigh damping for ocean, e_init
	31	!
[98]	32	! 97 2007-06-21 08:23:15Z raasch
	33	! Adjustments for the ocean version.
	34	! use_pt_reference renamed use_reference
	35	!
[90]	36	! 87 2007-05-22 15:46:47Z raasch
	37	! Bugfix: output of use_upstream_for_tke
	38	!
[83]	39	! 82 2007-04-16 15:40:52Z raasch
	40	! Preprocessor strings for different linux clusters changed to "lc",
	41	! routine local_flush is used for buffer flushing
	42	!
[77]	43	! 76 2007-03-29 00:58:32Z raasch
	44	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	45	! output of the loop optimization method, moisture renamed humidity,
	46	! output of subversion revision number
	47	!
[39]	48	! 19 2007-02-23 04:53:48Z raasch
	49	! Output of scalar flux applied at top boundary
	50	!
[3]	51	! RCS Log replace by Id keyword, revision history cleaned up
	52	!
[1]	53	! Revision 1.63 2006/08/22 13:53:13 raasch
	54	! Output of dz_max
	55	!
	56	! Revision 1.1 1997/08/11 06:17:20 raasch
	57	! Initial revision
	58	!
	59	!
	60	! Description:
	61	! ------------
	62	! Writing a header with all important informations about the actual run.
	63	! This subroutine is called three times, two times at the beginning
	64	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	65	! end of the run, then writing additional information about CPU-usage on file
	66	! header.
	67	!------------------------------------------------------------------------------!
	68
	69	USE arrays_3d
	70	USE control_parameters
	71	USE cloud_parameters
	72	USE cpulog
	73	USE dvrp_variables
	74	USE grid_variables
	75	USE indices
	76	USE model_1d
	77	USE particle_attributes
	78	USE pegrid
	79	USE spectrum
	80
	81	IMPLICIT NONE
	82
	83	CHARACTER (LEN=1) :: prec
	84	CHARACTER (LEN=2) :: do2d_mode
	85	CHARACTER (LEN=5) :: section_chr
	86	CHARACTER (LEN=9) :: time_to_string
	87	CHARACTER (LEN=10) :: coor_chr, host_chr
	88	CHARACTER (LEN=16) :: begin_chr
[200]	89	CHARACTER (LEN=23) :: ver_rev
[1]	90	CHARACTER (LEN=40) :: output_format
[167]	91	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	92	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	93	run_classification
	94	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	95	temperatures, ugcomponent, vgcomponent
[1]	96	CHARACTER (LEN=85) :: roben, runten
	97
	98	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	99	REAL :: cpuseconds_per_simulated_second
	100
	101	!
	102	!-- Open the output file. At the end of the simulation, output is directed
	103	!-- to unit 19.
	104	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	105	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	106	io = 15 ! header output on file RUN_CONTROL
	107	ELSE
	108	io = 19 ! header output on file HEADER
	109	ENDIF
	110	CALL check_open( io )
	111
	112	!
	113	!-- At the end of the run, output file (HEADER) will be rewritten with
	114	!-- new informations
	115	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	116
	117	!
	118	!-- Determine kind of model run
	119	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	120	run_classification = '3D - restart run'
[147]	121	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	122	run_classification = '3D - run using 3D - prerun data'
	123	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	124	run_classification = '3D - run without 1D - prerun'
[197]	125	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	126	run_classification = '3D - run with 1D - prerun'
[197]	127	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	128	run_classification = '3D - run initialized by user'
[1]	129	ELSE
[147]	130	PRINT*,'+++ header: unknown action(s): ',initializing_actions
[1]	131	ENDIF
[97]	132	IF ( ocean ) THEN
	133	run_classification = 'ocean - ' // run_classification
	134	ELSE
	135	run_classification = 'atmosphere - ' // run_classification
	136	ENDIF
[1]	137
	138	!
	139	!-- Run-identification, date, time, host
	140	host_chr = host(1:10)
[75]	141	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	142	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	143	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	144	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	145	ADJUSTR( host_chr )
[1]	146	#if defined( __parallel )
	147	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	148	char1 = 'calculated'
	149	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	150	host(1:2) == 'lc' ) .AND. &
	151	npex == -1 .AND. pdims(2) == 1 ) THEN
	152	char1 = 'forced'
	153	ELSE
	154	char1 = 'predefined'
	155	ENDIF
	156	IF ( threads_per_task == 1 ) THEN
[102]	157	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	158	ELSE
[102]	159	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	160	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	161	ENDIF
	162	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	163	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	164	npex == -1 .AND. pdims(2) == 1 ) &
	165	THEN
[102]	166	WRITE ( io, 106 )
[1]	167	ELSEIF ( pdims(2) == 1 ) THEN
[102]	168	WRITE ( io, 107 ) 'x'
[1]	169	ELSEIF ( pdims(1) == 1 ) THEN
[102]	170	WRITE ( io, 107 ) 'y'
[1]	171	ENDIF
[102]	172	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	173	#endif
	174	WRITE ( io, 99 )
	175
	176	!
	177	!-- Numerical schemes
	178	WRITE ( io, 110 )
	179	IF ( psolver(1:7) == 'poisfft' ) THEN
	180	WRITE ( io, 111 ) TRIM( fft_method )
	181	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	182	ELSEIF ( psolver == 'sor' ) THEN
	183	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	184	ELSEIF ( psolver == 'multigrid' ) THEN
	185	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	186	IF ( mg_cycles == -1 ) THEN
	187	WRITE ( io, 140 ) residual_limit
	188	ELSE
	189	WRITE ( io, 141 ) mg_cycles
	190	ENDIF
	191	IF ( mg_switch_to_pe0_level == 0 ) THEN
	192	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	193	nzt_mg(1)
[197]	194	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	195	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	196	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	197	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	198	nzt_mg(mg_switch_to_pe0_level), &
	199	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	200	nzt_mg(1)
	201	ENDIF
	202	ENDIF
	203	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	204	THEN
	205	WRITE ( io, 142 )
	206	ENDIF
	207
	208	IF ( momentum_advec == 'pw-scheme' ) THEN
	209	WRITE ( io, 113 )
	210	ELSE
	211	WRITE ( io, 114 )
	212	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	213	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	214	overshoot_limit_w /= 0.0 ) THEN
	215	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	216	overshoot_limit_w
	217	ENDIF
	218	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	219	ups_limit_w /= 0.0 ) &
	220	THEN
	221	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	222	ENDIF
	223	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	224	ENDIF
	225	IF ( scalar_advec == 'pw-scheme' ) THEN
	226	WRITE ( io, 116 )
	227	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	228	WRITE ( io, 117 )
	229	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	230	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	231	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	232	ENDIF
	233	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	234	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	235	ENDIF
	236	ELSE
	237	WRITE ( io, 118 )
	238	ENDIF
[63]	239
	240	WRITE ( io, 139 ) TRIM( loop_optimization )
	241
[1]	242	IF ( galilei_transformation ) THEN
	243	IF ( use_ug_for_galilei_tr ) THEN
	244	char1 = 'geostrophic wind'
	245	ELSE
	246	char1 = 'mean wind in model domain'
	247	ENDIF
	248	IF ( simulated_time_at_begin == simulated_time ) THEN
	249	char2 = 'at the start of the run'
	250	ELSE
	251	char2 = 'at the end of the run'
	252	ENDIF
	253	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	254	advected_distance_x/1000.0, advected_distance_y/1000.0
	255	ENDIF
	256	IF ( timestep_scheme == 'leapfrog' ) THEN
	257	WRITE ( io, 120 )
	258	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	259	WRITE ( io, 121 )
	260	ELSE
	261	WRITE ( io, 122 ) timestep_scheme
	262	ENDIF
[87]	263	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	264	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	265	IF ( .NOT. ocean ) THEN
	266	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	267	rayleigh_damping_factor
	268	ELSE
	269	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	270	rayleigh_damping_factor
	271	ENDIF
[1]	272	ENDIF
[75]	273	IF ( humidity ) THEN
[1]	274	IF ( .NOT. cloud_physics ) THEN
	275	WRITE ( io, 129 )
	276	ELSE
	277	WRITE ( io, 130 )
	278	WRITE ( io, 131 )
	279	IF ( radiation ) WRITE ( io, 132 )
	280	IF ( precipitation ) WRITE ( io, 133 )
	281	ENDIF
	282	ENDIF
	283	IF ( passive_scalar ) WRITE ( io, 134 )
	284	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	285	WRITE ( io, 99 )
	286
	287	!
	288	!-- Runtime and timestep informations
	289	WRITE ( io, 200 )
	290	IF ( .NOT. dt_fixed ) THEN
	291	WRITE ( io, 201 ) dt_max, cfl_factor
	292	ELSE
	293	WRITE ( io, 202 ) dt
	294	ENDIF
	295	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	296
	297	IF ( time_restart /= 9999999.9 .AND. &
	298	simulated_time_at_begin == simulated_time ) THEN
	299	IF ( dt_restart == 9999999.9 ) THEN
	300	WRITE ( io, 204 ) ' Restart at: ',time_restart
	301	ELSE
	302	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	303	ENDIF
	304	ENDIF
	305
	306	IF ( simulated_time_at_begin /= simulated_time ) THEN
	307	i = MAX ( log_point_s(10)%counts, 1 )
	308	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	309	cpuseconds_per_simulated_second = 0.0
	310	ELSE
	311	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	312	( simulated_time - &
	313	simulated_time_at_begin )
	314	ENDIF
	315	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	316	log_point_s(10)%sum / REAL( i ), &
	317	cpuseconds_per_simulated_second
	318	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	319	IF ( dt_restart == 9999999.9 ) THEN
	320	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	321	ELSE
	322	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	323	ENDIF
	324	ENDIF
	325	ENDIF
	326
	327	!
	328	!-- Computational grid
[94]	329	IF ( .NOT. ocean ) THEN
	330	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	331	IF ( dz_stretch_level_index < nzt+1 ) THEN
	332	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	333	dz_stretch_factor, dz_max
	334	ENDIF
	335	ELSE
	336	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	337	IF ( dz_stretch_level_index > 0 ) THEN
	338	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	339	dz_stretch_factor, dz_max
	340	ENDIF
[1]	341	ENDIF
	342	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	343	MIN( nnz+2, nzt+2 )
[76]	344	IF ( numprocs > 1 ) THEN
	345	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	346	WRITE ( io, 255 )
	347	ELSE
	348	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	349	ENDIF
[1]	350	ENDIF
	351	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	352
	353	!
	354	!-- Topography
	355	WRITE ( io, 270 ) topography
	356	SELECT CASE ( TRIM( topography ) )
	357
	358	CASE ( 'flat' )
	359	! no actions necessary
	360
	361	CASE ( 'single_building' )
	362	blx = INT( building_length_x / dx )
	363	bly = INT( building_length_y / dy )
	364	bh = INT( building_height / dz )
	365
	366	IF ( building_wall_left == 9999999.9 ) THEN
	367	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	368	ENDIF
	369	bxl = INT ( building_wall_left / dx + 0.5 )
	370	bxr = bxl + blx
	371
	372	IF ( building_wall_south == 9999999.9 ) THEN
	373	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	374	ENDIF
	375	bys = INT ( building_wall_south / dy + 0.5 )
	376	byn = bys + bly
	377
	378	WRITE ( io, 271 ) building_length_x, building_length_y, &
	379	building_height, bxl, bxr, bys, byn
	380
	381	END SELECT
	382
[138]	383	IF ( plant_canopy ) THEN
	384
	385	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	386	IF ( passive_scalar ) THEN
	387	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	388	leaf_surface_concentration
	389	ENDIF
[138]	390
[1]	391	!
[153]	392	!-- Heat flux at the top of vegetation
	393	WRITE ( io, 282 ) cthf
	394
	395	!
[138]	396	!-- Leaf area density profile
	397	!-- Building output strings, starting with surface value
	398	WRITE ( learde, '(F6.2)' ) lad_surface
	399	gradients = '------'
	400	slices = ' 0'
	401	coordinates = ' 0.0'
	402	i = 1
	403	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	404
	405	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	406	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	407
	408	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	409	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	410
	411	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	412	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	413
	414	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	415	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	416
	417	i = i + 1
	418	ENDDO
	419
[153]	420	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	421	TRIM( gradients ), TRIM( slices )
	422
	423	ENDIF
	424
	425	!
[1]	426	!-- Boundary conditions
	427	IF ( ibc_p_b == 0 ) THEN
	428	runten = 'p(0) = 0 \|'
	429	ELSEIF ( ibc_p_b == 1 ) THEN
	430	runten = 'p(0) = p(1) \|'
	431	ELSE
	432	runten = 'p(0) = p(1) +R\|'
	433	ENDIF
	434	IF ( ibc_p_t == 0 ) THEN
	435	roben = 'p(nzt+1) = 0 \|'
	436	ELSE
	437	roben = 'p(nzt+1) = p(nzt) \|'
	438	ENDIF
	439
	440	IF ( ibc_uv_b == 0 ) THEN
	441	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	442	ELSE
	443	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	444	ENDIF
[132]	445	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	446	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	447	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	448	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	449	ELSE
	450	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	451	ENDIF
	452
	453	IF ( ibc_pt_b == 0 ) THEN
	454	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	455	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	456	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	457	ELSEIF ( ibc_pt_b == 2 ) THEN
	458	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	459	ENDIF
	460	IF ( ibc_pt_t == 0 ) THEN
[19]	461	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	462	ELSEIF( ibc_pt_t == 1 ) THEN
	463	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	464	ELSEIF( ibc_pt_t == 2 ) THEN
	465	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	466	ENDIF
	467
	468	WRITE ( io, 300 ) runten, roben
	469
	470	IF ( .NOT. constant_diffusion ) THEN
	471	IF ( ibc_e_b == 1 ) THEN
	472	runten = 'e(0) = e(1)'
	473	ELSE
	474	runten = 'e(0) = e(1) = (u/0.1)*2'
	475	ENDIF
	476	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	477
[97]	478	WRITE ( io, 301 ) 'e', runten, roben
[1]	479
	480	ENDIF
	481
[97]	482	IF ( ocean ) THEN
	483	runten = 'sa(0) = sa(1)'
	484	IF ( ibc_sa_t == 0 ) THEN
	485	roben = 'sa(nzt+1) = sa_surface'
[1]	486	ELSE
[97]	487	roben = 'sa(nzt+1) = sa(nzt)'
[1]	488	ENDIF
[97]	489	WRITE ( io, 301 ) 'sa', runten, roben
	490	ENDIF
[1]	491
[97]	492	IF ( humidity ) THEN
	493	IF ( ibc_q_b == 0 ) THEN
	494	runten = 'q(0) = q_surface'
	495	ELSE
	496	runten = 'q(0) = q(1)'
	497	ENDIF
	498	IF ( ibc_q_t == 0 ) THEN
	499	roben = 'q(nzt) = q_top'
	500	ELSE
	501	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	502	ENDIF
	503	WRITE ( io, 301 ) 'q', runten, roben
	504	ENDIF
[1]	505
[97]	506	IF ( passive_scalar ) THEN
	507	IF ( ibc_q_b == 0 ) THEN
	508	runten = 's(0) = s_surface'
	509	ELSE
	510	runten = 's(0) = s(1)'
	511	ENDIF
	512	IF ( ibc_q_t == 0 ) THEN
	513	roben = 's(nzt) = s_top'
	514	ELSE
	515	roben = 's(nzt) = s(nzt-1) + ds/dz'
	516	ENDIF
	517	WRITE ( io, 301 ) 's', runten, roben
[1]	518	ENDIF
	519
	520	IF ( use_surface_fluxes ) THEN
	521	WRITE ( io, 303 )
	522	IF ( constant_heatflux ) THEN
	523	WRITE ( io, 306 ) surface_heatflux
	524	IF ( random_heatflux ) WRITE ( io, 307 )
	525	ENDIF
[75]	526	IF ( humidity .AND. constant_waterflux ) THEN
[1]	527	WRITE ( io, 311 ) surface_waterflux
	528	ENDIF
	529	IF ( passive_scalar .AND. constant_waterflux ) THEN
	530	WRITE ( io, 313 ) surface_waterflux
	531	ENDIF
	532	ENDIF
	533
[19]	534	IF ( use_top_fluxes ) THEN
	535	WRITE ( io, 304 )
[102]	536	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	537	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	538	IF ( constant_top_heatflux ) THEN
	539	WRITE ( io, 306 ) top_heatflux
	540	ENDIF
	541	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	542	WRITE ( io, 316 )
[19]	543	ENDIF
[97]	544	IF ( ocean .AND. constant_top_salinityflux ) THEN
	545	WRITE ( io, 309 ) top_salinityflux
	546	ENDIF
[75]	547	IF ( humidity .OR. passive_scalar ) THEN
[19]	548	WRITE ( io, 315 )
	549	ENDIF
	550	ENDIF
	551
[1]	552	IF ( prandtl_layer ) THEN
[94]	553	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	554	rif_min, rif_max
[1]	555	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	556	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	557	WRITE ( io, 312 )
	558	ENDIF
	559	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	560	WRITE ( io, 314 )
	561	ENDIF
	562	ELSE
	563	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	564	WRITE ( io, 310 ) rif_min, rif_max
	565	ENDIF
	566	ENDIF
	567
	568	WRITE ( io, 317 ) bc_lr, bc_ns
	569	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	570	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	571	IF ( turbulent_inflow ) THEN
	572	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	573	inflow_damping_height, inflow_damping_width
	574	ENDIF
[1]	575	ENDIF
	576
	577	!
	578	!-- Listing of 1D-profiles
[151]	579	WRITE ( io, 325 ) dt_dopr_listing
[1]	580	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	581	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	582	ENDIF
	583
	584	!
	585	!-- DATA output
	586	WRITE ( io, 330 )
	587	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	588	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	589	ENDIF
	590
	591	!
	592	!-- 1D-profiles
	593	dopr_chr = 'Profile:'
	594	IF ( dopr_n /= 0 ) THEN
	595	WRITE ( io, 331 )
	596
	597	output_format = ''
	598	IF ( netcdf_output ) THEN
	599	IF ( netcdf_64bit ) THEN
	600	output_format = 'netcdf (64 bit offset)'
	601	ELSE
	602	output_format = 'netcdf'
	603	ENDIF
	604	ENDIF
	605	IF ( profil_output ) THEN
	606	IF ( netcdf_output ) THEN
	607	output_format = TRIM( output_format ) // ' and profil'
	608	ELSE
	609	output_format = 'profil'
	610	ENDIF
	611	ENDIF
	612	WRITE ( io, 345 ) output_format
	613
	614	DO i = 1, dopr_n
	615	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	616	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	617	WRITE ( io, 332 ) dopr_chr
	618	dopr_chr = ' :'
	619	ENDIF
	620	ENDDO
	621
	622	IF ( dopr_chr /= '' ) THEN
	623	WRITE ( io, 332 ) dopr_chr
	624	ENDIF
	625	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	626	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	627	ENDIF
	628
	629	!
	630	!-- 2D-arrays
	631	DO av = 0, 1
	632
	633	i = 1
	634	do2d_xy = ''
	635	do2d_xz = ''
	636	do2d_yz = ''
	637	DO WHILE ( do2d(av,i) /= ' ' )
	638
	639	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	640	do2d_mode = do2d(av,i)(l-1:l)
	641
	642	SELECT CASE ( do2d_mode )
	643	CASE ( 'xy' )
	644	ll = LEN_TRIM( do2d_xy )
	645	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	646	CASE ( 'xz' )
	647	ll = LEN_TRIM( do2d_xz )
	648	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	649	CASE ( 'yz' )
	650	ll = LEN_TRIM( do2d_yz )
	651	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	652	END SELECT
	653
	654	i = i + 1
	655
	656	ENDDO
	657
	658	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	659	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	660	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	661	( netcdf_output .OR. iso2d_output ) ) THEN
	662
	663	IF ( av == 0 ) THEN
	664	WRITE ( io, 334 ) ''
	665	ELSE
	666	WRITE ( io, 334 ) '(time-averaged)'
	667	ENDIF
	668
	669	IF ( do2d_at_begin ) THEN
	670	begin_chr = 'and at the start'
	671	ELSE
	672	begin_chr = ''
	673	ENDIF
	674
	675	output_format = ''
	676	IF ( netcdf_output ) THEN
	677	IF ( netcdf_64bit ) THEN
	678	output_format = 'netcdf (64 bit offset)'
	679	ELSE
	680	output_format = 'netcdf'
	681	ENDIF
	682	ENDIF
	683	IF ( iso2d_output ) THEN
	684	IF ( netcdf_output ) THEN
	685	output_format = TRIM( output_format ) // ' and iso2d'
	686	ELSE
	687	output_format = 'iso2d'
	688	ENDIF
	689	ENDIF
	690	WRITE ( io, 345 ) output_format
	691
	692	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	693	i = 1
	694	slices = '/'
	695	coordinates = '/'
	696	!
	697	!-- Building strings with index and coordinate informations of the
	698	!-- slices
	699	DO WHILE ( section(i,1) /= -9999 )
	700
	701	WRITE (section_chr,'(I5)') section(i,1)
	702	section_chr = ADJUSTL( section_chr )
	703	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	704
	705	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	706	coor_chr = ADJUSTL( coor_chr )
	707	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	708
	709	i = i + 1
	710	ENDDO
	711	IF ( av == 0 ) THEN
	712	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	713	TRIM( begin_chr ), 'k', TRIM( slices ), &
	714	TRIM( coordinates )
	715	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	716	WRITE ( io, 339 ) skip_time_do2d_xy
	717	ENDIF
	718	ELSE
	719	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	720	TRIM( begin_chr ), averaging_interval, &
	721	dt_averaging_input, 'k', TRIM( slices ), &
	722	TRIM( coordinates )
	723	IF ( skip_time_data_output_av /= 0.0 ) THEN
	724	WRITE ( io, 339 ) skip_time_data_output_av
	725	ENDIF
	726	ENDIF
	727
	728	ENDIF
	729
	730	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	731	i = 1
	732	slices = '/'
	733	coordinates = '/'
	734	!
	735	!-- Building strings with index and coordinate informations of the
	736	!-- slices
	737	DO WHILE ( section(i,2) /= -9999 )
	738
	739	WRITE (section_chr,'(I5)') section(i,2)
	740	section_chr = ADJUSTL( section_chr )
	741	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	742
	743	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	744	coor_chr = ADJUSTL( coor_chr )
	745	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	746
	747	i = i + 1
	748	ENDDO
	749	IF ( av == 0 ) THEN
	750	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	751	TRIM( begin_chr ), 'j', TRIM( slices ), &
	752	TRIM( coordinates )
	753	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	754	WRITE ( io, 339 ) skip_time_do2d_xz
	755	ENDIF
	756	ELSE
	757	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	758	TRIM( begin_chr ), averaging_interval, &
	759	dt_averaging_input, 'j', TRIM( slices ), &
	760	TRIM( coordinates )
	761	IF ( skip_time_data_output_av /= 0.0 ) THEN
	762	WRITE ( io, 339 ) skip_time_data_output_av
	763	ENDIF
	764	ENDIF
	765	ENDIF
	766
	767	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	768	i = 1
	769	slices = '/'
	770	coordinates = '/'
	771	!
	772	!-- Building strings with index and coordinate informations of the
	773	!-- slices
	774	DO WHILE ( section(i,3) /= -9999 )
	775
	776	WRITE (section_chr,'(I5)') section(i,3)
	777	section_chr = ADJUSTL( section_chr )
	778	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	779
	780	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	781	coor_chr = ADJUSTL( coor_chr )
	782	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	783
	784	i = i + 1
	785	ENDDO
	786	IF ( av == 0 ) THEN
	787	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	788	TRIM( begin_chr ), 'i', TRIM( slices ), &
	789	TRIM( coordinates )
	790	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	791	WRITE ( io, 339 ) skip_time_do2d_yz
	792	ENDIF
	793	ELSE
	794	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	795	TRIM( begin_chr ), averaging_interval, &
	796	dt_averaging_input, 'i', TRIM( slices ), &
	797	TRIM( coordinates )
	798	IF ( skip_time_data_output_av /= 0.0 ) THEN
	799	WRITE ( io, 339 ) skip_time_data_output_av
	800	ENDIF
	801	ENDIF
	802	ENDIF
	803
	804	ENDIF
	805
	806	ENDDO
	807
	808	!
	809	!-- 3d-arrays
	810	DO av = 0, 1
	811
	812	i = 1
	813	do3d_chr = ''
	814	DO WHILE ( do3d(av,i) /= ' ' )
	815
	816	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	817	i = i + 1
	818
	819	ENDDO
	820
	821	IF ( do3d_chr /= '' ) THEN
	822	IF ( av == 0 ) THEN
	823	WRITE ( io, 336 ) ''
	824	ELSE
	825	WRITE ( io, 336 ) '(time-averaged)'
	826	ENDIF
	827
	828	output_format = ''
	829	IF ( netcdf_output ) THEN
[46]	830	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	831	output_format = 'netcdf (64 bit offset)'
	832	ELSE
	833	output_format = 'netcdf'
	834	ENDIF
	835	ENDIF
	836	IF ( avs_output ) THEN
	837	IF ( netcdf_output ) THEN
	838	output_format = TRIM( output_format ) // ' and avs'
	839	ELSE
	840	output_format = 'avs'
	841	ENDIF
	842	ENDIF
	843	WRITE ( io, 345 ) output_format
	844
	845	IF ( do3d_at_begin ) THEN
	846	begin_chr = 'and at the start'
	847	ELSE
	848	begin_chr = ''
	849	ENDIF
	850	IF ( av == 0 ) THEN
	851	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	852	zu(nz_do3d), nz_do3d
	853	ELSE
	854	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	855	TRIM( begin_chr ), averaging_interval, &
	856	dt_averaging_input, zu(nz_do3d), nz_do3d
	857	ENDIF
	858
	859	IF ( do3d_compress ) THEN
	860	do3d_chr = ''
	861	i = 1
	862	DO WHILE ( do3d(av,i) /= ' ' )
	863
	864	SELECT CASE ( do3d(av,i) )
	865	CASE ( 'u' )
	866	j = 1
	867	CASE ( 'v' )
	868	j = 2
	869	CASE ( 'w' )
	870	j = 3
	871	CASE ( 'p' )
	872	j = 4
	873	CASE ( 'pt' )
	874	j = 5
	875	END SELECT
	876	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	877	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	878	':' // prec // ','
	879	i = i + 1
	880
	881	ENDDO
	882	WRITE ( io, 338 ) do3d_chr
	883
	884	ENDIF
	885
	886	IF ( av == 0 ) THEN
	887	IF ( skip_time_do3d /= 0.0 ) THEN
	888	WRITE ( io, 339 ) skip_time_do3d
	889	ENDIF
	890	ELSE
	891	IF ( skip_time_data_output_av /= 0.0 ) THEN
	892	WRITE ( io, 339 ) skip_time_data_output_av
	893	ENDIF
	894	ENDIF
	895
	896	ENDIF
	897
	898	ENDDO
	899
	900	!
	901	!-- Timeseries
	902	IF ( dt_dots /= 9999999.9 ) THEN
	903	WRITE ( io, 340 )
	904
	905	output_format = ''
	906	IF ( netcdf_output ) THEN
	907	IF ( netcdf_64bit ) THEN
	908	output_format = 'netcdf (64 bit offset)'
	909	ELSE
	910	output_format = 'netcdf'
	911	ENDIF
	912	ENDIF
	913	IF ( profil_output ) THEN
	914	IF ( netcdf_output ) THEN
	915	output_format = TRIM( output_format ) // ' and profil'
	916	ELSE
	917	output_format = 'profil'
	918	ENDIF
	919	ENDIF
	920	WRITE ( io, 345 ) output_format
	921	WRITE ( io, 341 ) dt_dots
	922	ENDIF
	923
	924	#if defined( __dvrp_graphics )
	925	!
	926	!-- Dvrp-output
	927	IF ( dt_dvrp /= 9999999.9 ) THEN
	928	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	929	TRIM( dvrp_username ), TRIM( dvrp_directory )
	930	i = 1
	931	l = 0
	932	DO WHILE ( mode_dvrp(i) /= ' ' )
	933	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	934	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	935	l = l + 1
	936	IF ( do3d(0,j) /= ' ' ) THEN
	937	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	938	ENDIF
	939	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	940	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	941	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	942	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	943	WRITE ( io, 363 )
	944	ENDIF
	945	i = i + 1
	946	ENDDO
	947	ENDIF
	948	#endif
	949
	950	#if defined( __spectra )
	951	!
	952	!-- Spectra output
	953	IF ( dt_dosp /= 9999999.9 ) THEN
	954	WRITE ( io, 370 )
	955
	956	output_format = ''
	957	IF ( netcdf_output ) THEN
	958	IF ( netcdf_64bit ) THEN
	959	output_format = 'netcdf (64 bit offset)'
	960	ELSE
	961	output_format = 'netcdf'
	962	ENDIF
	963	ENDIF
	964	IF ( profil_output ) THEN
	965	IF ( netcdf_output ) THEN
	966	output_format = TRIM( output_format ) // ' and profil'
	967	ELSE
	968	output_format = 'profil'
	969	ENDIF
	970	ENDIF
	971	WRITE ( io, 345 ) output_format
	972	WRITE ( io, 371 ) dt_dosp
	973	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	974	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	975	( spectra_direction(i), i = 1,10 ), &
[189]	976	( comp_spectra_level(i), i = 1,100 ), &
	977	( plot_spectra_level(i), i = 1,100 ), &
[1]	978	averaging_interval_sp, dt_averaging_input_pr
	979	ENDIF
	980	#endif
	981
	982	WRITE ( io, 99 )
	983
	984	!
	985	!-- Physical quantities
	986	WRITE ( io, 400 )
	987
	988	!
	989	!-- Geostrophic parameters
	990	WRITE ( io, 410 ) omega, phi, f, fs
	991
	992	!
	993	!-- Other quantities
	994	WRITE ( io, 411 ) g
[97]	995	IF ( use_reference ) THEN
	996	IF ( ocean ) THEN
	997	WRITE ( io, 412 ) prho_reference
	998	ELSE
	999	WRITE ( io, 413 ) pt_reference
	1000	ENDIF
	1001	ENDIF
[1]	1002
	1003	!
	1004	!-- Cloud physics parameters
	1005	IF ( cloud_physics ) THEN
[57]	1006	WRITE ( io, 415 )
	1007	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1008	ENDIF
	1009
	1010	!-- Profile of the geostrophic wind (component ug)
	1011	!-- Building output strings
	1012	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1013	gradients = '------'
	1014	slices = ' 0'
	1015	coordinates = ' 0.0'
	1016	i = 1
	1017	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1018
[167]	1019	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1020	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1021
[167]	1022	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1023	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1024
[167]	1025	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1026	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1027
[167]	1028	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1029	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1030
	1031	i = i + 1
	1032	ENDDO
	1033
	1034	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1035	TRIM( gradients ), TRIM( slices )
	1036
	1037	!-- Profile of the geostrophic wind (component vg)
	1038	!-- Building output strings
	1039	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1040	gradients = '------'
	1041	slices = ' 0'
	1042	coordinates = ' 0.0'
	1043	i = 1
	1044	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1045
[167]	1046	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1047	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1048
[167]	1049	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1050	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1051
[167]	1052	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1053	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1054
[167]	1055	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1056	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1057
	1058	i = i + 1
	1059	ENDDO
	1060
	1061	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1062	TRIM( gradients ), TRIM( slices )
	1063
	1064	!
	1065	!-- Initial temperature profile
	1066	!-- Building output strings, starting with surface temperature
	1067	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1068	gradients = '------'
	1069	slices = ' 0'
	1070	coordinates = ' 0.0'
	1071	i = 1
	1072	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1073
[94]	1074	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1075	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1076
[94]	1077	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1078	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1079
[94]	1080	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1081	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1082
[94]	1083	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1084	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1085
	1086	i = i + 1
	1087	ENDDO
	1088
	1089	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1090	TRIM( gradients ), TRIM( slices )
	1091
	1092	!
	1093	!-- Initial humidity profile
	1094	!-- Building output strings, starting with surface humidity
[75]	1095	IF ( humidity .OR. passive_scalar ) THEN
[1]	1096	WRITE ( temperatures, '(E8.1)' ) q_surface
	1097	gradients = '--------'
	1098	slices = ' 0'
	1099	coordinates = ' 0.0'
	1100	i = 1
	1101	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1102
	1103	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1104	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1105
	1106	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1107	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1108
	1109	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1110	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1111
	1112	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1113	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1114
	1115	i = i + 1
	1116	ENDDO
	1117
[75]	1118	IF ( humidity ) THEN
[1]	1119	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1120	TRIM( gradients ), TRIM( slices )
	1121	ELSE
	1122	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1123	TRIM( gradients ), TRIM( slices )
	1124	ENDIF
	1125	ENDIF
	1126
	1127	!
[97]	1128	!-- Initial salinity profile
	1129	!-- Building output strings, starting with surface salinity
	1130	IF ( ocean ) THEN
	1131	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1132	gradients = '------'
	1133	slices = ' 0'
	1134	coordinates = ' 0.0'
	1135	i = 1
	1136	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1137
	1138	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1139	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1140
	1141	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1142	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1143
	1144	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1145	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1146
	1147	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1148	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1149
	1150	i = i + 1
	1151	ENDDO
	1152
	1153	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1154	TRIM( gradients ), TRIM( slices )
	1155	ENDIF
	1156
	1157	!
[1]	1158	!-- LES / turbulence parameters
	1159	WRITE ( io, 450 )
	1160
	1161	!--
	1162	! ... LES-constants used must still be added here
	1163	!--
	1164	IF ( constant_diffusion ) THEN
	1165	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1166	prandtl_number
	1167	ENDIF
	1168	IF ( .NOT. constant_diffusion) THEN
[108]	1169	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1170	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1171	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1172	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1173	ENDIF
	1174
	1175	!
	1176	!-- Special actions during the run
	1177	WRITE ( io, 470 )
	1178	IF ( create_disturbances ) THEN
	1179	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1180	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1181	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1182	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1183	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1184	ELSE
	1185	WRITE ( io, 473 ) disturbance_energy_limit
	1186	ENDIF
	1187	WRITE ( io, 474 ) TRIM( random_generator )
	1188	ENDIF
	1189	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1190	WRITE ( io, 475 ) pt_surface_initial_change
	1191	ENDIF
[75]	1192	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1193	WRITE ( io, 476 ) q_surface_initial_change
	1194	ENDIF
	1195	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1196	WRITE ( io, 477 ) q_surface_initial_change
	1197	ENDIF
	1198
[60]	1199	IF ( particle_advection ) THEN
[1]	1200	!
[60]	1201	!-- Particle attributes
	1202	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1203	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1204	end_time_prel, dt_sort_particles
[60]	1205	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1206	IF ( random_start_position ) WRITE ( io, 481 )
	1207	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1208	WRITE ( io, 495 ) total_number_of_particles
	1209	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1210	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1211	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1212	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1213	WRITE ( io, 484 ) total_number_of_tails, &
	1214	minimum_tailpoint_distance, &
	1215	maximum_tailpoint_age
	1216	ENDIF
[1]	1217	ENDIF
[60]	1218	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1219	WRITE ( io, 485 ) dt_write_particle_data
	1220	output_format = ''
	1221	IF ( netcdf_output ) THEN
	1222	IF ( netcdf_64bit ) THEN
	1223	output_format = 'netcdf (64 bit offset) and binary'
	1224	ELSE
	1225	output_format = 'netcdf and binary'
	1226	ENDIF
[1]	1227	ELSE
[60]	1228	output_format = 'binary'
[1]	1229	ENDIF
[60]	1230	WRITE ( io, 345 ) output_format
[1]	1231	ENDIF
[60]	1232	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1233	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1234
[60]	1235	WRITE ( io, 487 ) number_of_particle_groups
[1]	1236
[60]	1237	DO i = 1, number_of_particle_groups
	1238	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1239	WRITE ( io, 490 ) i, 0.0
	1240	WRITE ( io, 492 )
[1]	1241	ELSE
[60]	1242	WRITE ( io, 490 ) i, radius(i)
	1243	IF ( density_ratio(i) /= 0.0 ) THEN
	1244	WRITE ( io, 491 ) density_ratio(i)
	1245	ELSE
	1246	WRITE ( io, 492 )
	1247	ENDIF
[1]	1248	ENDIF
[60]	1249	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1250	pdx(i), pdy(i), pdz(i)
	1251	ENDDO
[1]	1252
[60]	1253	ENDIF
[1]	1254
[60]	1255
[1]	1256	!
	1257	!-- Parameters of 1D-model
	1258	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1259	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1260	mixing_length_1d, dissipation_1d
	1261	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1262	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1263	ENDIF
	1264	ENDIF
	1265
	1266	!
	1267	!-- User-defined informations
	1268	CALL user_header( io )
	1269
	1270	WRITE ( io, 99 )
	1271
	1272	!
	1273	!-- Write buffer contents to disc immediately
[82]	1274	CALL local_flush( io )
[1]	1275
	1276	!
	1277	!-- Here the FORMATs start
	1278
	1279	99 FORMAT (1X,78('-'))
[200]	1280	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1281	1X,'* ',A,' *',9X,A/ &
	1282	1X,'***************************',9X,42('-'))
[102]	1283	101 FORMAT (37X,'coupled run: ',A/ &
	1284	37X,42('-'))
[200]	1285	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1286	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1287	' Run on host: ',A10)
[1]	1288	#if defined( __parallel )
[200]	1289	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1290	')',1X,A)
[200]	1291	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1292	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1293	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1294	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1295	37X,'because the job is running on an SMP-cluster')
[102]	1296	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1297	#endif
	1298	110 FORMAT (/' Numerical Schemes:'/ &
	1299	' -----------------'/)
	1300	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1301	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1302	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1303	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1304	' or Upstream')
	1305	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1306	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1307	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1308	' or Upstream')
	1309	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1310	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1311	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1312	' Translation velocity = ',A/ &
	1313	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1314	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1315	' of timestep changes)')
	1316	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1317	' timestep changes')
	1318	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1319	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1320	' maximum damping coefficient: ',F5.3, ' 1/s')
	1321	124 FORMAT (' Spline-overshoots are being suppressed')
	1322	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1323	' of'/ &
	1324	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1325	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1326	' of'/ &
	1327	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1328	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1329	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1330	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1331	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1332	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1333	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1334	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1335	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1336	' effective emissivity scheme')
	1337	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1338	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1339	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1340	A,'-cycle)'/ &
	1341	' number of grid levels: ',I2/ &
	1342	' Gauss-Seidel red/black iterations: ',I2)
	1343	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1344	I3,')')
	1345	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1346	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1347	I3,')'/ &
	1348	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1349	I3,')')
	1350	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1351	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1352	140 FORMAT (' maximum residual allowed: ',E10.3)
	1353	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1354	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1355	'step')
[87]	1356	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1357	'kinetic energy')
[1]	1358	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1359	'conserved')
	1360	200 FORMAT (//' Run time and time step information:'/ &
	1361	' ----------------------------------'/)
	1362	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1363	' CFL-factor: ',F4.2)
	1364	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1365	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1366	' End time: ',F9.3,' s')
	1367	204 FORMAT ( A,F9.3,' s')
	1368	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1369	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1370	' CPU-time used: ',F9.3,' s per timestep: ', &
	1371	' ',F9.3,' s'/ &
	1372	' per second of simulated tim', &
	1373	'e: ',F9.3,' s')
	1374	250 FORMAT (//' Computational grid and domain size:'/ &
	1375	' ----------------------------------'// &
	1376	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1377	' m dz = ',F7.3,' m'/ &
	1378	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1379	' m z(u) = ',F10.3,' m'/)
	1380	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1381	' factor: ',F5.3/ &
	1382	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1383	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1384	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1385	255 FORMAT (' Subdomains have equal size')
	1386	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1387	'have smaller sizes'/ &
	1388	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1389	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1390	' degrees')
	1391	270 FORMAT (//' Topography informations:'/ &
	1392	' -----------------------'// &
	1393	1X,'Topography: ',A)
	1394	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1395	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1396	' / ',I4)
[138]	1397	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1398	' ------------------------------'// &
	1399	' Canopy mode: ', A / &
	1400	' Canopy top: ',I4 / &
	1401	' Leaf drag coefficient: ',F6.2 /)
[153]	1402	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1403	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1404	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1405	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1406	' Height: ',A,' m'/ &
	1407	' Leaf area density: ',A,' m2/m3'/ &
	1408	' Gradient: ',A,' m2/m4'/ &
	1409	' Gridpoint: ',A)
	1410
[1]	1411	300 FORMAT (//' Boundary conditions:'/ &
	1412	' -------------------'// &
	1413	' p uv ', &
	1414	' pt'// &
	1415	' B. bound.: ',A/ &
	1416	' T. bound.: ',A)
[97]	1417	301 FORMAT (/' ',A// &
[1]	1418	' B. bound.: ',A/ &
	1419	' T. bound.: ',A)
[19]	1420	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1421	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1422	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1423	'computational u,v-level:'// &
[1]	1424	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1425	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1426	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1427	307 FORMAT (' Heatflux has a random normal distribution')
	1428	308 FORMAT (' Predefined surface temperature')
[97]	1429	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1430	310 FORMAT (//' 1D-Model:'// &
	1431	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1432	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1433	312 FORMAT (' Predefined surface humidity')
	1434	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1435	314 FORMAT (' Predefined scalar value at the surface')
[19]	1436	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1437	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1438	'atmosphere model')
[1]	1439	317 FORMAT (//' Lateral boundaries:'/ &
	1440	' left/right: ',A/ &
	1441	' north/south: ',A)
	1442	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1443	'max =',F5.1,' m**2/s')
[151]	1444	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1445	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1446	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1447	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1448	' v: ',F9.6,' m2/s2')
[151]	1449	325 FORMAT (//' List output:'/ &
[1]	1450	' -----------'// &
	1451	' 1D-Profiles:'/ &
	1452	' Output every ',F8.2,' s')
[151]	1453	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1454	' Averaging input every ',F8.2,' s')
	1455	330 FORMAT (//' Data output:'/ &
	1456	' -----------'/)
	1457	331 FORMAT (/' 1D-Profiles:')
	1458	332 FORMAT (/' ',A)
	1459	333 FORMAT (' Output every ',F8.2,' s',/ &
	1460	' Time averaged over ',F8.2,' s'/ &
	1461	' Averaging input every ',F8.2,' s')
	1462	334 FORMAT (/' 2D-Arrays',A,':')
	1463	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1464	' Output every ',F8.2,' s ',A/ &
	1465	' Cross sections at ',A1,' = ',A/ &
	1466	' scalar-coordinates: ',A,' m'/)
	1467	336 FORMAT (/' 3D-Arrays',A,':')
	1468	337 FORMAT (/' Arrays: ',A/ &
	1469	' Output every ',F8.2,' s ',A/ &
	1470	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1471	338 FORMAT (' Compressed data output'/ &
	1472	' Decimal precision: ',A/)
	1473	339 FORMAT (' No output during initial ',F8.2,' s')
	1474	340 FORMAT (/' Time series:')
	1475	341 FORMAT (' Output every ',F8.2,' s'/)
	1476	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1477	' Output every ',F8.2,' s ',A/ &
	1478	' Time averaged over ',F8.2,' s'/ &
	1479	' Averaging input every ',F8.2,' s'/ &
	1480	' Cross sections at ',A1,' = ',A/ &
	1481	' scalar-coordinates: ',A,' m'/)
	1482	343 FORMAT (/' Arrays: ',A/ &
	1483	' Output every ',F8.2,' s ',A/ &
	1484	' Time averaged over ',F8.2,' s'/ &
	1485	' Averaging input every ',F8.2,' s'/ &
	1486	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1487	345 FORMAT (' Output format: ',A/)
	1488	#if defined( __dvrp_graphics )
	1489	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1490	' Output every ',F7.1,' s'/ &
	1491	' Output mode: ',A/ &
	1492	' Host / User: ',A,' / ',A/ &
	1493	' Directory: ',A// &
	1494	' The sequence contains:')
	1495	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1496	362 FORMAT (' Sectional plane ',A)
	1497	363 FORMAT (' Particles')
	1498	#endif
	1499	#if defined( __spectra )
	1500	370 FORMAT (' Spectra:')
	1501	371 FORMAT (' Output every ',F7.1,' s'/)
	1502	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1503	' Directions: ', 10(A5,',')/ &
[189]	1504	' height levels k = ', 20(I3,',')/ &
	1505	' ', 20(I3,',')/ &
	1506	' ', 20(I3,',')/ &
	1507	' ', 20(I3,',')/ &
	1508	' ', 19(I3,','),I3,'.'/ &
[1]	1509	' height levels selected for standard plot:'/ &
[189]	1510	' k = ', 20(I3,',')/ &
	1511	' ', 20(I3,',')/ &
	1512	' ', 20(I3,',')/ &
	1513	' ', 20(I3,',')/ &
	1514	' ', 19(I3,','),I3,'.'/ &
[1]	1515	' Time averaged over ', F7.1, ' s,' / &
	1516	' Profiles for the time averaging are taken every ', &
	1517	F6.1,' s')
	1518	#endif
	1519	400 FORMAT (//' Physical quantities:'/ &
	1520	' -------------------'/)
	1521	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1522	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1523	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1524	' f* = ',F9.6,' 1/s')
	1525	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1526	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1527	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1528	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1529	' ------------------------'/)
[57]	1530	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1531	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1532	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1533	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1534	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1535	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1536	' Height: ',A,' m'/ &
	1537	' Temperature: ',A,' K'/ &
	1538	' Gradient: ',A,' K/100m'/ &
	1539	' Gridpoint: ',A)
	1540	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1541	' Height: ',A,' m'/ &
	1542	' Humidity: ',A,' kg/kg'/ &
	1543	' Gradient: ',A,' (kg/kg)/100m'/ &
	1544	' Gridpoint: ',A)
	1545	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1546	' Height: ',A,' m'/ &
	1547	' Scalar concentration: ',A,' kg/m**3'/ &
	1548	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1549	' Gridpoint: ',A)
	1550	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1551	' Height: ',A,' m'/ &
	1552	' ug: ',A,' m/s'/ &
	1553	' Gradient: ',A,' 1/100s'/ &
	1554	' Gridpoint: ',A)
	1555	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1556	' Height: ',A,' m'/ &
[97]	1557	' vg: ',A,' m/s'/ &
[1]	1558	' Gradient: ',A,' 1/100s'/ &
	1559	' Gridpoint: ',A)
[97]	1560	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1561	' Height: ',A,' m'/ &
	1562	' Salinity: ',A,' psu'/ &
	1563	' Gradient: ',A,' psu/100m'/ &
	1564	' Gridpoint: ',A)
[1]	1565	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1566	' ---------------------------'/)
	1567	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1568	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1569	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1570	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1571	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1572	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1573	470 FORMAT (//' Actions during the simulation:'/ &
	1574	' -----------------------------'/)
[94]	1575	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1576	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1577	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1578	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1579	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1580	' to i/j =',I4)
	1581	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1582	1X,F5.3, ' m2/s2')
	1583	474 FORMAT (' Random number generator used : ',A/)
	1584	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1585	'respectively, if'/ &
	1586	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1587	' 3D-simulation'/)
	1588	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1589	'respectively, if the'/ &
	1590	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1591	' the 3D-simulation'/)
	1592	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1593	'respectively, if the'/ &
	1594	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1595	' the 3D-simulation'/)
	1596	480 FORMAT (' Particles:'/ &
	1597	' ---------'// &
	1598	' Particle advection is active (switched on at t = ', F7.1, &
	1599	' s)'/ &
	1600	' Start of new particle generations every ',F6.1,' s'/ &
	1601	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1602	' bottom: ', A, ' top: ', A/&
	1603	' Maximum particle age: ',F9.1,' s'/ &
[117]	1604	' Advection stopped at t = ',F9.1,' s'/ &
	1605	' Particles are sorted every ',F9.1,' s'/)
[1]	1606	481 FORMAT (' Particles have random start positions'/)
	1607	482 FORMAT (' Particles are advected only horizontally'/)
	1608	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1609	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1610	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1611	' Maximum age of the end of the tail: ',F8.2,' s')
	1612	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1613	486 FORMAT (' Particle statistics are written on file'/)
	1614	487 FORMAT (' Number of particle groups: ',I2/)
	1615	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1616	' minimum timestep for advection: ', F7.5/)
	1617	489 FORMAT (' Number of particles simultaneously released at each ', &
	1618	'point: ', I5/)
	1619	490 FORMAT (' Particle group ',I2,':'/ &
	1620	' Particle radius: ',E10.3, 'm')
	1621	491 FORMAT (' Particle inertia is activated'/ &
	1622	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1623	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1624	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1625	' y:',F8.1,' - ',F8.1,' m'/&
	1626	' z:',F8.1,' - ',F8.1,' m'/&
	1627	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1628	' m dz = ',F8.1,' m'/)
	1629	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1630	F8.2,' s'/)
	1631	495 FORMAT (' Number of particles in total domain: ',I10/)
	1632	500 FORMAT (//' 1D-Model parameters:'/ &
	1633	' -------------------'// &
	1634	' Simulation time: ',F8.1,' s'/ &
	1635	' Run-controll output every: ',F8.1,' s'/ &
	1636	' Vertical profile output every: ',F8.1,' s'/ &
	1637	' Mixing length calculation: ',A/ &
	1638	' Dissipation calculation: ',A/)
	1639	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1640
	1641
	1642	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |