Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 184

Last change on this file since 184 was 167, checked in by steinfeld, 16 years ago
Bugfix in header.f90
Property svn:keywords set to `Id`
File size: 62.0 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[167]	6	! Bugfix in the output of the characteristic levels of potential temperature,
	7	! geostrophic wind, scalar concentration, humidity and leaf area density
[151]	8	! Output of turbulence recycling informations
[1]	9	!
	10	! Former revisions:
	11	! -----------------
[3]	12	! $Id: header.f90 167 2008-05-15 13:19:25Z letzel $
[39]	13	!
[139]	14	! 138 2007-11-28 10:03:58Z letzel
	15	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	16	! Allow two instead of one digit to specify isosurface and slicer variables.
	17	! Output of sorting frequency of particles
	18	!
[110]	19	! 108 2007-08-24 15:10:38Z letzel
	20	! Output of informations for coupled model runs (boundary conditions etc.)
	21	! + output of momentumfluxes at the top boundary
	22	! Rayleigh damping for ocean, e_init
	23	!
[98]	24	! 97 2007-06-21 08:23:15Z raasch
	25	! Adjustments for the ocean version.
	26	! use_pt_reference renamed use_reference
	27	!
[90]	28	! 87 2007-05-22 15:46:47Z raasch
	29	! Bugfix: output of use_upstream_for_tke
	30	!
[83]	31	! 82 2007-04-16 15:40:52Z raasch
	32	! Preprocessor strings for different linux clusters changed to "lc",
	33	! routine local_flush is used for buffer flushing
	34	!
[77]	35	! 76 2007-03-29 00:58:32Z raasch
	36	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	37	! output of the loop optimization method, moisture renamed humidity,
	38	! output of subversion revision number
	39	!
[39]	40	! 19 2007-02-23 04:53:48Z raasch
	41	! Output of scalar flux applied at top boundary
	42	!
[3]	43	! RCS Log replace by Id keyword, revision history cleaned up
	44	!
[1]	45	! Revision 1.63 2006/08/22 13:53:13 raasch
	46	! Output of dz_max
	47	!
	48	! Revision 1.1 1997/08/11 06:17:20 raasch
	49	! Initial revision
	50	!
	51	!
	52	! Description:
	53	! ------------
	54	! Writing a header with all important informations about the actual run.
	55	! This subroutine is called three times, two times at the beginning
	56	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	57	! end of the run, then writing additional information about CPU-usage on file
	58	! header.
	59	!------------------------------------------------------------------------------!
	60
	61	USE arrays_3d
	62	USE control_parameters
	63	USE cloud_parameters
	64	USE cpulog
	65	USE dvrp_variables
	66	USE grid_variables
	67	USE indices
	68	USE model_1d
	69	USE particle_attributes
	70	USE pegrid
	71	USE spectrum
	72
	73	IMPLICIT NONE
	74
	75	CHARACTER (LEN=1) :: prec
	76	CHARACTER (LEN=2) :: do2d_mode
	77	CHARACTER (LEN=5) :: section_chr
	78	CHARACTER (LEN=9) :: time_to_string
	79	CHARACTER (LEN=10) :: coor_chr, host_chr
	80	CHARACTER (LEN=16) :: begin_chr
[75]	81	CHARACTER (LEN=21) :: ver_rev
[1]	82	CHARACTER (LEN=40) :: output_format
[167]	83	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	84	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[167]	85	run_classification
	86	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	87	temperatures, ugcomponent, vgcomponent
[1]	88	CHARACTER (LEN=85) :: roben, runten
	89
	90	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	91	REAL :: cpuseconds_per_simulated_second
	92
	93	!
	94	!-- Open the output file. At the end of the simulation, output is directed
	95	!-- to unit 19.
	96	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	97	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	98	io = 15 ! header output on file RUN_CONTROL
	99	ELSE
	100	io = 19 ! header output on file HEADER
	101	ENDIF
	102	CALL check_open( io )
	103
	104	!
	105	!-- At the end of the run, output file (HEADER) will be rewritten with
	106	!-- new informations
	107	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	108
	109	!
	110	!-- Determine kind of model run
	111	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	112	run_classification = '3D - restart run'
[147]	113	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
	114	run_classification = '3D - run using 3D - prerun data'
	115	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	116	run_classification = '3D - run without 1D - prerun'
	117	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	118	run_classification = '3D - run with 1D - prerun'
[1]	119	ELSE
[147]	120	PRINT*,'+++ header: unknown action(s): ',initializing_actions
[1]	121	ENDIF
[97]	122	IF ( ocean ) THEN
	123	run_classification = 'ocean - ' // run_classification
	124	ELSE
	125	run_classification = 'atmosphere - ' // run_classification
	126	ENDIF
[1]	127
	128	!
	129	!-- Run-identification, date, time, host
	130	host_chr = host(1:10)
[75]	131	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	132	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	133	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	134	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	135	ADJUSTR( host_chr )
[1]	136	#if defined( __parallel )
	137	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	138	char1 = 'calculated'
	139	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	140	host(1:2) == 'lc' ) .AND. &
	141	npex == -1 .AND. pdims(2) == 1 ) THEN
	142	char1 = 'forced'
	143	ELSE
	144	char1 = 'predefined'
	145	ENDIF
	146	IF ( threads_per_task == 1 ) THEN
[102]	147	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	148	ELSE
[102]	149	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	150	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	151	ENDIF
	152	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	153	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	154	npex == -1 .AND. pdims(2) == 1 ) &
	155	THEN
[102]	156	WRITE ( io, 106 )
[1]	157	ELSEIF ( pdims(2) == 1 ) THEN
[102]	158	WRITE ( io, 107 ) 'x'
[1]	159	ELSEIF ( pdims(1) == 1 ) THEN
[102]	160	WRITE ( io, 107 ) 'y'
[1]	161	ENDIF
[102]	162	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	163	#endif
	164	WRITE ( io, 99 )
	165
	166	!
	167	!-- Numerical schemes
	168	WRITE ( io, 110 )
	169	IF ( psolver(1:7) == 'poisfft' ) THEN
	170	WRITE ( io, 111 ) TRIM( fft_method )
	171	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	172	ELSEIF ( psolver == 'sor' ) THEN
	173	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	174	ELSEIF ( psolver == 'multigrid' ) THEN
	175	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	176	IF ( mg_cycles == -1 ) THEN
	177	WRITE ( io, 140 ) residual_limit
	178	ELSE
	179	WRITE ( io, 141 ) mg_cycles
	180	ENDIF
	181	IF ( mg_switch_to_pe0_level == 0 ) THEN
	182	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	183	nzt_mg(1)
	184	ELSE
	185	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	186	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	187	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	188	nzt_mg(mg_switch_to_pe0_level), &
	189	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	190	nzt_mg(1)
	191	ENDIF
	192	ENDIF
	193	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	194	THEN
	195	WRITE ( io, 142 )
	196	ENDIF
	197
	198	IF ( momentum_advec == 'pw-scheme' ) THEN
	199	WRITE ( io, 113 )
	200	ELSE
	201	WRITE ( io, 114 )
	202	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	203	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	204	overshoot_limit_w /= 0.0 ) THEN
	205	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	206	overshoot_limit_w
	207	ENDIF
	208	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	209	ups_limit_w /= 0.0 ) &
	210	THEN
	211	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	212	ENDIF
	213	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	214	ENDIF
	215	IF ( scalar_advec == 'pw-scheme' ) THEN
	216	WRITE ( io, 116 )
	217	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	218	WRITE ( io, 117 )
	219	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	220	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	221	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	222	ENDIF
	223	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	224	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	225	ENDIF
	226	ELSE
	227	WRITE ( io, 118 )
	228	ENDIF
[63]	229
	230	WRITE ( io, 139 ) TRIM( loop_optimization )
	231
[1]	232	IF ( galilei_transformation ) THEN
	233	IF ( use_ug_for_galilei_tr ) THEN
	234	char1 = 'geostrophic wind'
	235	ELSE
	236	char1 = 'mean wind in model domain'
	237	ENDIF
	238	IF ( simulated_time_at_begin == simulated_time ) THEN
	239	char2 = 'at the start of the run'
	240	ELSE
	241	char2 = 'at the end of the run'
	242	ENDIF
	243	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	244	advected_distance_x/1000.0, advected_distance_y/1000.0
	245	ENDIF
	246	IF ( timestep_scheme == 'leapfrog' ) THEN
	247	WRITE ( io, 120 )
	248	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	249	WRITE ( io, 121 )
	250	ELSE
	251	WRITE ( io, 122 ) timestep_scheme
	252	ENDIF
[87]	253	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	254	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	255	IF ( .NOT. ocean ) THEN
	256	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	257	rayleigh_damping_factor
	258	ELSE
	259	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	260	rayleigh_damping_factor
	261	ENDIF
[1]	262	ENDIF
[75]	263	IF ( humidity ) THEN
[1]	264	IF ( .NOT. cloud_physics ) THEN
	265	WRITE ( io, 129 )
	266	ELSE
	267	WRITE ( io, 130 )
	268	WRITE ( io, 131 )
	269	IF ( radiation ) WRITE ( io, 132 )
	270	IF ( precipitation ) WRITE ( io, 133 )
	271	ENDIF
	272	ENDIF
	273	IF ( passive_scalar ) WRITE ( io, 134 )
	274	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	275	WRITE ( io, 99 )
	276
	277	!
	278	!-- Runtime and timestep informations
	279	WRITE ( io, 200 )
	280	IF ( .NOT. dt_fixed ) THEN
	281	WRITE ( io, 201 ) dt_max, cfl_factor
	282	ELSE
	283	WRITE ( io, 202 ) dt
	284	ENDIF
	285	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	286
	287	IF ( time_restart /= 9999999.9 .AND. &
	288	simulated_time_at_begin == simulated_time ) THEN
	289	IF ( dt_restart == 9999999.9 ) THEN
	290	WRITE ( io, 204 ) ' Restart at: ',time_restart
	291	ELSE
	292	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	293	ENDIF
	294	ENDIF
	295
	296	IF ( simulated_time_at_begin /= simulated_time ) THEN
	297	i = MAX ( log_point_s(10)%counts, 1 )
	298	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	299	cpuseconds_per_simulated_second = 0.0
	300	ELSE
	301	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	302	( simulated_time - &
	303	simulated_time_at_begin )
	304	ENDIF
	305	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	306	log_point_s(10)%sum / REAL( i ), &
	307	cpuseconds_per_simulated_second
	308	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	309	IF ( dt_restart == 9999999.9 ) THEN
	310	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	311	ELSE
	312	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	313	ENDIF
	314	ENDIF
	315	ENDIF
	316
	317	!
	318	!-- Computational grid
[94]	319	IF ( .NOT. ocean ) THEN
	320	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	321	IF ( dz_stretch_level_index < nzt+1 ) THEN
	322	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	323	dz_stretch_factor, dz_max
	324	ENDIF
	325	ELSE
	326	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	327	IF ( dz_stretch_level_index > 0 ) THEN
	328	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	329	dz_stretch_factor, dz_max
	330	ENDIF
[1]	331	ENDIF
	332	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	333	MIN( nnz+2, nzt+2 )
[76]	334	IF ( numprocs > 1 ) THEN
	335	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	336	WRITE ( io, 255 )
	337	ELSE
	338	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	339	ENDIF
[1]	340	ENDIF
	341	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	342
	343	!
	344	!-- Topography
	345	WRITE ( io, 270 ) topography
	346	SELECT CASE ( TRIM( topography ) )
	347
	348	CASE ( 'flat' )
	349	! no actions necessary
	350
	351	CASE ( 'single_building' )
	352	blx = INT( building_length_x / dx )
	353	bly = INT( building_length_y / dy )
	354	bh = INT( building_height / dz )
	355
	356	IF ( building_wall_left == 9999999.9 ) THEN
	357	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	358	ENDIF
	359	bxl = INT ( building_wall_left / dx + 0.5 )
	360	bxr = bxl + blx
	361
	362	IF ( building_wall_south == 9999999.9 ) THEN
	363	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	364	ENDIF
	365	bys = INT ( building_wall_south / dy + 0.5 )
	366	byn = bys + bly
	367
	368	WRITE ( io, 271 ) building_length_x, building_length_y, &
	369	building_height, bxl, bxr, bys, byn
	370
	371	END SELECT
	372
[138]	373	IF ( plant_canopy ) THEN
	374
	375	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	376	IF ( passive_scalar ) THEN
	377	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	378	leaf_surface_concentration
	379	ENDIF
[138]	380
[1]	381	!
[153]	382	!-- Heat flux at the top of vegetation
	383	WRITE ( io, 282 ) cthf
	384
	385	!
[138]	386	!-- Leaf area density profile
	387	!-- Building output strings, starting with surface value
	388	WRITE ( learde, '(F6.2)' ) lad_surface
	389	gradients = '------'
	390	slices = ' 0'
	391	coordinates = ' 0.0'
	392	i = 1
	393	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	394
	395	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	396	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	397
	398	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	399	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	400
	401	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	402	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	403
	404	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	405	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	406
	407	i = i + 1
	408	ENDDO
	409
[153]	410	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	411	TRIM( gradients ), TRIM( slices )
	412
	413	ENDIF
	414
	415	!
[1]	416	!-- Boundary conditions
	417	IF ( ibc_p_b == 0 ) THEN
	418	runten = 'p(0) = 0 \|'
	419	ELSEIF ( ibc_p_b == 1 ) THEN
	420	runten = 'p(0) = p(1) \|'
	421	ELSE
	422	runten = 'p(0) = p(1) +R\|'
	423	ENDIF
	424	IF ( ibc_p_t == 0 ) THEN
	425	roben = 'p(nzt+1) = 0 \|'
	426	ELSE
	427	roben = 'p(nzt+1) = p(nzt) \|'
	428	ENDIF
	429
	430	IF ( ibc_uv_b == 0 ) THEN
	431	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	432	ELSE
	433	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	434	ENDIF
[132]	435	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	436	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	437	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	438	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	439	ELSE
	440	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	441	ENDIF
	442
	443	IF ( ibc_pt_b == 0 ) THEN
	444	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	445	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	446	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	447	ELSEIF ( ibc_pt_b == 2 ) THEN
	448	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	449	ENDIF
	450	IF ( ibc_pt_t == 0 ) THEN
[19]	451	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	452	ELSEIF( ibc_pt_t == 1 ) THEN
	453	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	454	ELSEIF( ibc_pt_t == 2 ) THEN
	455	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	456	ENDIF
	457
	458	WRITE ( io, 300 ) runten, roben
	459
	460	IF ( .NOT. constant_diffusion ) THEN
	461	IF ( ibc_e_b == 1 ) THEN
	462	runten = 'e(0) = e(1)'
	463	ELSE
	464	runten = 'e(0) = e(1) = (u/0.1)*2'
	465	ENDIF
	466	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	467
[97]	468	WRITE ( io, 301 ) 'e', runten, roben
[1]	469
	470	ENDIF
	471
[97]	472	IF ( ocean ) THEN
	473	runten = 'sa(0) = sa(1)'
	474	IF ( ibc_sa_t == 0 ) THEN
	475	roben = 'sa(nzt+1) = sa_surface'
[1]	476	ELSE
[97]	477	roben = 'sa(nzt+1) = sa(nzt)'
[1]	478	ENDIF
[97]	479	WRITE ( io, 301 ) 'sa', runten, roben
	480	ENDIF
[1]	481
[97]	482	IF ( humidity ) THEN
	483	IF ( ibc_q_b == 0 ) THEN
	484	runten = 'q(0) = q_surface'
	485	ELSE
	486	runten = 'q(0) = q(1)'
	487	ENDIF
	488	IF ( ibc_q_t == 0 ) THEN
	489	roben = 'q(nzt) = q_top'
	490	ELSE
	491	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	492	ENDIF
	493	WRITE ( io, 301 ) 'q', runten, roben
	494	ENDIF
[1]	495
[97]	496	IF ( passive_scalar ) THEN
	497	IF ( ibc_q_b == 0 ) THEN
	498	runten = 's(0) = s_surface'
	499	ELSE
	500	runten = 's(0) = s(1)'
	501	ENDIF
	502	IF ( ibc_q_t == 0 ) THEN
	503	roben = 's(nzt) = s_top'
	504	ELSE
	505	roben = 's(nzt) = s(nzt-1) + ds/dz'
	506	ENDIF
	507	WRITE ( io, 301 ) 's', runten, roben
[1]	508	ENDIF
	509
	510	IF ( use_surface_fluxes ) THEN
	511	WRITE ( io, 303 )
	512	IF ( constant_heatflux ) THEN
	513	WRITE ( io, 306 ) surface_heatflux
	514	IF ( random_heatflux ) WRITE ( io, 307 )
	515	ENDIF
[75]	516	IF ( humidity .AND. constant_waterflux ) THEN
[1]	517	WRITE ( io, 311 ) surface_waterflux
	518	ENDIF
	519	IF ( passive_scalar .AND. constant_waterflux ) THEN
	520	WRITE ( io, 313 ) surface_waterflux
	521	ENDIF
	522	ENDIF
	523
[19]	524	IF ( use_top_fluxes ) THEN
	525	WRITE ( io, 304 )
[102]	526	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	527	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	528	IF ( constant_top_heatflux ) THEN
	529	WRITE ( io, 306 ) top_heatflux
	530	ENDIF
	531	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	532	WRITE ( io, 316 )
[19]	533	ENDIF
[97]	534	IF ( ocean .AND. constant_top_salinityflux ) THEN
	535	WRITE ( io, 309 ) top_salinityflux
	536	ENDIF
[75]	537	IF ( humidity .OR. passive_scalar ) THEN
[19]	538	WRITE ( io, 315 )
	539	ENDIF
	540	ENDIF
	541
[1]	542	IF ( prandtl_layer ) THEN
[94]	543	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	544	rif_min, rif_max
[1]	545	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	546	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	547	WRITE ( io, 312 )
	548	ENDIF
	549	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	550	WRITE ( io, 314 )
	551	ENDIF
	552	ELSE
	553	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	554	WRITE ( io, 310 ) rif_min, rif_max
	555	ENDIF
	556	ENDIF
	557
	558	WRITE ( io, 317 ) bc_lr, bc_ns
	559	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	560	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	561	IF ( turbulent_inflow ) THEN
	562	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	563	inflow_damping_height, inflow_damping_width
	564	ENDIF
[1]	565	ENDIF
	566
	567	!
	568	!-- Listing of 1D-profiles
[151]	569	WRITE ( io, 325 ) dt_dopr_listing
[1]	570	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	571	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	572	ENDIF
	573
	574	!
	575	!-- DATA output
	576	WRITE ( io, 330 )
	577	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	578	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	579	ENDIF
	580
	581	!
	582	!-- 1D-profiles
	583	dopr_chr = 'Profile:'
	584	IF ( dopr_n /= 0 ) THEN
	585	WRITE ( io, 331 )
	586
	587	output_format = ''
	588	IF ( netcdf_output ) THEN
	589	IF ( netcdf_64bit ) THEN
	590	output_format = 'netcdf (64 bit offset)'
	591	ELSE
	592	output_format = 'netcdf'
	593	ENDIF
	594	ENDIF
	595	IF ( profil_output ) THEN
	596	IF ( netcdf_output ) THEN
	597	output_format = TRIM( output_format ) // ' and profil'
	598	ELSE
	599	output_format = 'profil'
	600	ENDIF
	601	ENDIF
	602	WRITE ( io, 345 ) output_format
	603
	604	DO i = 1, dopr_n
	605	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	606	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	607	WRITE ( io, 332 ) dopr_chr
	608	dopr_chr = ' :'
	609	ENDIF
	610	ENDDO
	611
	612	IF ( dopr_chr /= '' ) THEN
	613	WRITE ( io, 332 ) dopr_chr
	614	ENDIF
	615	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	616	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	617	ENDIF
	618
	619	!
	620	!-- 2D-arrays
	621	DO av = 0, 1
	622
	623	i = 1
	624	do2d_xy = ''
	625	do2d_xz = ''
	626	do2d_yz = ''
	627	DO WHILE ( do2d(av,i) /= ' ' )
	628
	629	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	630	do2d_mode = do2d(av,i)(l-1:l)
	631
	632	SELECT CASE ( do2d_mode )
	633	CASE ( 'xy' )
	634	ll = LEN_TRIM( do2d_xy )
	635	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	636	CASE ( 'xz' )
	637	ll = LEN_TRIM( do2d_xz )
	638	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	639	CASE ( 'yz' )
	640	ll = LEN_TRIM( do2d_yz )
	641	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	642	END SELECT
	643
	644	i = i + 1
	645
	646	ENDDO
	647
	648	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	649	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	650	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	651	( netcdf_output .OR. iso2d_output ) ) THEN
	652
	653	IF ( av == 0 ) THEN
	654	WRITE ( io, 334 ) ''
	655	ELSE
	656	WRITE ( io, 334 ) '(time-averaged)'
	657	ENDIF
	658
	659	IF ( do2d_at_begin ) THEN
	660	begin_chr = 'and at the start'
	661	ELSE
	662	begin_chr = ''
	663	ENDIF
	664
	665	output_format = ''
	666	IF ( netcdf_output ) THEN
	667	IF ( netcdf_64bit ) THEN
	668	output_format = 'netcdf (64 bit offset)'
	669	ELSE
	670	output_format = 'netcdf'
	671	ENDIF
	672	ENDIF
	673	IF ( iso2d_output ) THEN
	674	IF ( netcdf_output ) THEN
	675	output_format = TRIM( output_format ) // ' and iso2d'
	676	ELSE
	677	output_format = 'iso2d'
	678	ENDIF
	679	ENDIF
	680	WRITE ( io, 345 ) output_format
	681
	682	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	683	i = 1
	684	slices = '/'
	685	coordinates = '/'
	686	!
	687	!-- Building strings with index and coordinate informations of the
	688	!-- slices
	689	DO WHILE ( section(i,1) /= -9999 )
	690
	691	WRITE (section_chr,'(I5)') section(i,1)
	692	section_chr = ADJUSTL( section_chr )
	693	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	694
	695	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	696	coor_chr = ADJUSTL( coor_chr )
	697	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	698
	699	i = i + 1
	700	ENDDO
	701	IF ( av == 0 ) THEN
	702	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	703	TRIM( begin_chr ), 'k', TRIM( slices ), &
	704	TRIM( coordinates )
	705	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	706	WRITE ( io, 339 ) skip_time_do2d_xy
	707	ENDIF
	708	ELSE
	709	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	710	TRIM( begin_chr ), averaging_interval, &
	711	dt_averaging_input, 'k', TRIM( slices ), &
	712	TRIM( coordinates )
	713	IF ( skip_time_data_output_av /= 0.0 ) THEN
	714	WRITE ( io, 339 ) skip_time_data_output_av
	715	ENDIF
	716	ENDIF
	717
	718	ENDIF
	719
	720	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	721	i = 1
	722	slices = '/'
	723	coordinates = '/'
	724	!
	725	!-- Building strings with index and coordinate informations of the
	726	!-- slices
	727	DO WHILE ( section(i,2) /= -9999 )
	728
	729	WRITE (section_chr,'(I5)') section(i,2)
	730	section_chr = ADJUSTL( section_chr )
	731	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	732
	733	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	734	coor_chr = ADJUSTL( coor_chr )
	735	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	736
	737	i = i + 1
	738	ENDDO
	739	IF ( av == 0 ) THEN
	740	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	741	TRIM( begin_chr ), 'j', TRIM( slices ), &
	742	TRIM( coordinates )
	743	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	744	WRITE ( io, 339 ) skip_time_do2d_xz
	745	ENDIF
	746	ELSE
	747	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	748	TRIM( begin_chr ), averaging_interval, &
	749	dt_averaging_input, 'j', TRIM( slices ), &
	750	TRIM( coordinates )
	751	IF ( skip_time_data_output_av /= 0.0 ) THEN
	752	WRITE ( io, 339 ) skip_time_data_output_av
	753	ENDIF
	754	ENDIF
	755	ENDIF
	756
	757	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	758	i = 1
	759	slices = '/'
	760	coordinates = '/'
	761	!
	762	!-- Building strings with index and coordinate informations of the
	763	!-- slices
	764	DO WHILE ( section(i,3) /= -9999 )
	765
	766	WRITE (section_chr,'(I5)') section(i,3)
	767	section_chr = ADJUSTL( section_chr )
	768	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	769
	770	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	771	coor_chr = ADJUSTL( coor_chr )
	772	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	773
	774	i = i + 1
	775	ENDDO
	776	IF ( av == 0 ) THEN
	777	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	778	TRIM( begin_chr ), 'i', TRIM( slices ), &
	779	TRIM( coordinates )
	780	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	781	WRITE ( io, 339 ) skip_time_do2d_yz
	782	ENDIF
	783	ELSE
	784	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	785	TRIM( begin_chr ), averaging_interval, &
	786	dt_averaging_input, 'i', TRIM( slices ), &
	787	TRIM( coordinates )
	788	IF ( skip_time_data_output_av /= 0.0 ) THEN
	789	WRITE ( io, 339 ) skip_time_data_output_av
	790	ENDIF
	791	ENDIF
	792	ENDIF
	793
	794	ENDIF
	795
	796	ENDDO
	797
	798	!
	799	!-- 3d-arrays
	800	DO av = 0, 1
	801
	802	i = 1
	803	do3d_chr = ''
	804	DO WHILE ( do3d(av,i) /= ' ' )
	805
	806	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	807	i = i + 1
	808
	809	ENDDO
	810
	811	IF ( do3d_chr /= '' ) THEN
	812	IF ( av == 0 ) THEN
	813	WRITE ( io, 336 ) ''
	814	ELSE
	815	WRITE ( io, 336 ) '(time-averaged)'
	816	ENDIF
	817
	818	output_format = ''
	819	IF ( netcdf_output ) THEN
[46]	820	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	821	output_format = 'netcdf (64 bit offset)'
	822	ELSE
	823	output_format = 'netcdf'
	824	ENDIF
	825	ENDIF
	826	IF ( avs_output ) THEN
	827	IF ( netcdf_output ) THEN
	828	output_format = TRIM( output_format ) // ' and avs'
	829	ELSE
	830	output_format = 'avs'
	831	ENDIF
	832	ENDIF
	833	WRITE ( io, 345 ) output_format
	834
	835	IF ( do3d_at_begin ) THEN
	836	begin_chr = 'and at the start'
	837	ELSE
	838	begin_chr = ''
	839	ENDIF
	840	IF ( av == 0 ) THEN
	841	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	842	zu(nz_do3d), nz_do3d
	843	ELSE
	844	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	845	TRIM( begin_chr ), averaging_interval, &
	846	dt_averaging_input, zu(nz_do3d), nz_do3d
	847	ENDIF
	848
	849	IF ( do3d_compress ) THEN
	850	do3d_chr = ''
	851	i = 1
	852	DO WHILE ( do3d(av,i) /= ' ' )
	853
	854	SELECT CASE ( do3d(av,i) )
	855	CASE ( 'u' )
	856	j = 1
	857	CASE ( 'v' )
	858	j = 2
	859	CASE ( 'w' )
	860	j = 3
	861	CASE ( 'p' )
	862	j = 4
	863	CASE ( 'pt' )
	864	j = 5
	865	END SELECT
	866	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	867	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	868	':' // prec // ','
	869	i = i + 1
	870
	871	ENDDO
	872	WRITE ( io, 338 ) do3d_chr
	873
	874	ENDIF
	875
	876	IF ( av == 0 ) THEN
	877	IF ( skip_time_do3d /= 0.0 ) THEN
	878	WRITE ( io, 339 ) skip_time_do3d
	879	ENDIF
	880	ELSE
	881	IF ( skip_time_data_output_av /= 0.0 ) THEN
	882	WRITE ( io, 339 ) skip_time_data_output_av
	883	ENDIF
	884	ENDIF
	885
	886	ENDIF
	887
	888	ENDDO
	889
	890	!
	891	!-- Timeseries
	892	IF ( dt_dots /= 9999999.9 ) THEN
	893	WRITE ( io, 340 )
	894
	895	output_format = ''
	896	IF ( netcdf_output ) THEN
	897	IF ( netcdf_64bit ) THEN
	898	output_format = 'netcdf (64 bit offset)'
	899	ELSE
	900	output_format = 'netcdf'
	901	ENDIF
	902	ENDIF
	903	IF ( profil_output ) THEN
	904	IF ( netcdf_output ) THEN
	905	output_format = TRIM( output_format ) // ' and profil'
	906	ELSE
	907	output_format = 'profil'
	908	ENDIF
	909	ENDIF
	910	WRITE ( io, 345 ) output_format
	911	WRITE ( io, 341 ) dt_dots
	912	ENDIF
	913
	914	#if defined( __dvrp_graphics )
	915	!
	916	!-- Dvrp-output
	917	IF ( dt_dvrp /= 9999999.9 ) THEN
	918	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	919	TRIM( dvrp_username ), TRIM( dvrp_directory )
	920	i = 1
	921	l = 0
	922	DO WHILE ( mode_dvrp(i) /= ' ' )
	923	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	924	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	925	l = l + 1
	926	IF ( do3d(0,j) /= ' ' ) THEN
	927	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	928	ENDIF
	929	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	930	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	931	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	932	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	933	WRITE ( io, 363 )
	934	ENDIF
	935	i = i + 1
	936	ENDDO
	937	ENDIF
	938	#endif
	939
	940	#if defined( __spectra )
	941	!
	942	!-- Spectra output
	943	IF ( dt_dosp /= 9999999.9 ) THEN
	944	WRITE ( io, 370 )
	945
	946	output_format = ''
	947	IF ( netcdf_output ) THEN
	948	IF ( netcdf_64bit ) THEN
	949	output_format = 'netcdf (64 bit offset)'
	950	ELSE
	951	output_format = 'netcdf'
	952	ENDIF
	953	ENDIF
	954	IF ( profil_output ) THEN
	955	IF ( netcdf_output ) THEN
	956	output_format = TRIM( output_format ) // ' and profil'
	957	ELSE
	958	output_format = 'profil'
	959	ENDIF
	960	ENDIF
	961	WRITE ( io, 345 ) output_format
	962	WRITE ( io, 371 ) dt_dosp
	963	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	964	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	965	( spectra_direction(i), i = 1,10 ), &
	966	( comp_spectra_level(i), i = 1,10 ), &
	967	( plot_spectra_level(i), i = 1,10 ), &
	968	averaging_interval_sp, dt_averaging_input_pr
	969	ENDIF
	970	#endif
	971
	972	WRITE ( io, 99 )
	973
	974	!
	975	!-- Physical quantities
	976	WRITE ( io, 400 )
	977
	978	!
	979	!-- Geostrophic parameters
	980	WRITE ( io, 410 ) omega, phi, f, fs
	981
	982	!
	983	!-- Other quantities
	984	WRITE ( io, 411 ) g
[97]	985	IF ( use_reference ) THEN
	986	IF ( ocean ) THEN
	987	WRITE ( io, 412 ) prho_reference
	988	ELSE
	989	WRITE ( io, 413 ) pt_reference
	990	ENDIF
	991	ENDIF
[1]	992
	993	!
	994	!-- Cloud physics parameters
	995	IF ( cloud_physics ) THEN
[57]	996	WRITE ( io, 415 )
	997	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	998	ENDIF
	999
	1000	!-- Profile of the geostrophic wind (component ug)
	1001	!-- Building output strings
	1002	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1003	gradients = '------'
	1004	slices = ' 0'
	1005	coordinates = ' 0.0'
	1006	i = 1
	1007	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1008
[167]	1009	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1010	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1011
[167]	1012	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1013	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1014
[167]	1015	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1016	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1017
[167]	1018	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1019	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1020
	1021	i = i + 1
	1022	ENDDO
	1023
	1024	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1025	TRIM( gradients ), TRIM( slices )
	1026
	1027	!-- Profile of the geostrophic wind (component vg)
	1028	!-- Building output strings
	1029	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1030	gradients = '------'
	1031	slices = ' 0'
	1032	coordinates = ' 0.0'
	1033	i = 1
	1034	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1035
[167]	1036	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1037	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1038
[167]	1039	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1040	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1041
[167]	1042	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1043	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1044
[167]	1045	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1046	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1047
	1048	i = i + 1
	1049	ENDDO
	1050
	1051	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1052	TRIM( gradients ), TRIM( slices )
	1053
	1054	!
	1055	!-- Initial temperature profile
	1056	!-- Building output strings, starting with surface temperature
	1057	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1058	gradients = '------'
	1059	slices = ' 0'
	1060	coordinates = ' 0.0'
	1061	i = 1
	1062	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1063
[94]	1064	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1065	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1066
[94]	1067	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1068	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1069
[94]	1070	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1071	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1072
[94]	1073	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1074	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1075
	1076	i = i + 1
	1077	ENDDO
	1078
	1079	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1080	TRIM( gradients ), TRIM( slices )
	1081
	1082	!
	1083	!-- Initial humidity profile
	1084	!-- Building output strings, starting with surface humidity
[75]	1085	IF ( humidity .OR. passive_scalar ) THEN
[1]	1086	WRITE ( temperatures, '(E8.1)' ) q_surface
	1087	gradients = '--------'
	1088	slices = ' 0'
	1089	coordinates = ' 0.0'
	1090	i = 1
	1091	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1092
	1093	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1094	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1095
	1096	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1097	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1098
	1099	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1100	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1101
	1102	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1103	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1104
	1105	i = i + 1
	1106	ENDDO
	1107
[75]	1108	IF ( humidity ) THEN
[1]	1109	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1110	TRIM( gradients ), TRIM( slices )
	1111	ELSE
	1112	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1113	TRIM( gradients ), TRIM( slices )
	1114	ENDIF
	1115	ENDIF
	1116
	1117	!
[97]	1118	!-- Initial salinity profile
	1119	!-- Building output strings, starting with surface salinity
	1120	IF ( ocean ) THEN
	1121	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1122	gradients = '------'
	1123	slices = ' 0'
	1124	coordinates = ' 0.0'
	1125	i = 1
	1126	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1127
	1128	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1129	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1130
	1131	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1132	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1133
	1134	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1135	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1136
	1137	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1138	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1139
	1140	i = i + 1
	1141	ENDDO
	1142
	1143	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1144	TRIM( gradients ), TRIM( slices )
	1145	ENDIF
	1146
	1147	!
[1]	1148	!-- LES / turbulence parameters
	1149	WRITE ( io, 450 )
	1150
	1151	!--
	1152	! ... LES-constants used must still be added here
	1153	!--
	1154	IF ( constant_diffusion ) THEN
	1155	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1156	prandtl_number
	1157	ENDIF
	1158	IF ( .NOT. constant_diffusion) THEN
[108]	1159	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1160	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1161	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1162	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1163	ENDIF
	1164
	1165	!
	1166	!-- Special actions during the run
	1167	WRITE ( io, 470 )
	1168	IF ( create_disturbances ) THEN
	1169	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1170	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1171	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1172	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1173	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1174	ELSE
	1175	WRITE ( io, 473 ) disturbance_energy_limit
	1176	ENDIF
	1177	WRITE ( io, 474 ) TRIM( random_generator )
	1178	ENDIF
	1179	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1180	WRITE ( io, 475 ) pt_surface_initial_change
	1181	ENDIF
[75]	1182	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1183	WRITE ( io, 476 ) q_surface_initial_change
	1184	ENDIF
	1185	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1186	WRITE ( io, 477 ) q_surface_initial_change
	1187	ENDIF
	1188
[60]	1189	IF ( particle_advection ) THEN
[1]	1190	!
[60]	1191	!-- Particle attributes
	1192	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1193	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1194	end_time_prel, dt_sort_particles
[60]	1195	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1196	IF ( random_start_position ) WRITE ( io, 481 )
	1197	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1198	WRITE ( io, 495 ) total_number_of_particles
	1199	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1200	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1201	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1202	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1203	WRITE ( io, 484 ) total_number_of_tails, &
	1204	minimum_tailpoint_distance, &
	1205	maximum_tailpoint_age
	1206	ENDIF
[1]	1207	ENDIF
[60]	1208	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1209	WRITE ( io, 485 ) dt_write_particle_data
	1210	output_format = ''
	1211	IF ( netcdf_output ) THEN
	1212	IF ( netcdf_64bit ) THEN
	1213	output_format = 'netcdf (64 bit offset) and binary'
	1214	ELSE
	1215	output_format = 'netcdf and binary'
	1216	ENDIF
[1]	1217	ELSE
[60]	1218	output_format = 'binary'
[1]	1219	ENDIF
[60]	1220	WRITE ( io, 345 ) output_format
[1]	1221	ENDIF
[60]	1222	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1223	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1224
[60]	1225	WRITE ( io, 487 ) number_of_particle_groups
[1]	1226
[60]	1227	DO i = 1, number_of_particle_groups
	1228	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1229	WRITE ( io, 490 ) i, 0.0
	1230	WRITE ( io, 492 )
[1]	1231	ELSE
[60]	1232	WRITE ( io, 490 ) i, radius(i)
	1233	IF ( density_ratio(i) /= 0.0 ) THEN
	1234	WRITE ( io, 491 ) density_ratio(i)
	1235	ELSE
	1236	WRITE ( io, 492 )
	1237	ENDIF
[1]	1238	ENDIF
[60]	1239	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1240	pdx(i), pdy(i), pdz(i)
	1241	ENDDO
[1]	1242
[60]	1243	ENDIF
[1]	1244
[60]	1245
[1]	1246	!
	1247	!-- Parameters of 1D-model
	1248	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1249	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1250	mixing_length_1d, dissipation_1d
	1251	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1252	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1253	ENDIF
	1254	ENDIF
	1255
	1256	!
	1257	!-- User-defined informations
	1258	CALL user_header( io )
	1259
	1260	WRITE ( io, 99 )
	1261
	1262	!
	1263	!-- Write buffer contents to disc immediately
[82]	1264	CALL local_flush( io )
[1]	1265
	1266	!
	1267	!-- Here the FORMATs start
	1268
	1269	99 FORMAT (1X,78('-'))
[97]	1270	100 FORMAT (/1X,'*************************',11X,42('-')/ &
[75]	1271	1X,'* ',A,' *',11X,A/ &
[102]	1272	1X,'*************************',11X,42('-'))
	1273	101 FORMAT (37X,'coupled run: ',A/ &
	1274	37X,42('-'))
	1275	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
[1]	1276	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1277	' Run on host: ',A10)
	1278	#if defined( __parallel )
[102]	1279	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1280	')',1X,A)
[102]	1281	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1282	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1283	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1284	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1285	37X,'because the job is running on an SMP-cluster')
[102]	1286	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1287	#endif
	1288	110 FORMAT (/' Numerical Schemes:'/ &
	1289	' -----------------'/)
	1290	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1291	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1292	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1293	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1294	' or Upstream')
	1295	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1296	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1297	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1298	' or Upstream')
	1299	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1300	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1301	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1302	' Translation velocity = ',A/ &
	1303	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1304	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1305	' of timestep changes)')
	1306	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1307	' timestep changes')
	1308	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1309	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1310	' maximum damping coefficient: ',F5.3, ' 1/s')
	1311	124 FORMAT (' Spline-overshoots are being suppressed')
	1312	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1313	' of'/ &
	1314	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1315	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1316	' of'/ &
	1317	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1318	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1319	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1320	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1321	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1322	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1323	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1324	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1325	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1326	' effective emissivity scheme')
	1327	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1328	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1329	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1330	A,'-cycle)'/ &
	1331	' number of grid levels: ',I2/ &
	1332	' Gauss-Seidel red/black iterations: ',I2)
	1333	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1334	I3,')')
	1335	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1336	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1337	I3,')'/ &
	1338	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1339	I3,')')
	1340	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1341	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1342	140 FORMAT (' maximum residual allowed: ',E10.3)
	1343	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1344	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1345	'step')
[87]	1346	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1347	'kinetic energy')
[1]	1348	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1349	'conserved')
	1350	200 FORMAT (//' Run time and time step information:'/ &
	1351	' ----------------------------------'/)
	1352	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1353	' CFL-factor: ',F4.2)
	1354	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1355	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1356	' End time: ',F9.3,' s')
	1357	204 FORMAT ( A,F9.3,' s')
	1358	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1359	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1360	' CPU-time used: ',F9.3,' s per timestep: ', &
	1361	' ',F9.3,' s'/ &
	1362	' per second of simulated tim', &
	1363	'e: ',F9.3,' s')
	1364	250 FORMAT (//' Computational grid and domain size:'/ &
	1365	' ----------------------------------'// &
	1366	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1367	' m dz = ',F7.3,' m'/ &
	1368	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1369	' m z(u) = ',F10.3,' m'/)
	1370	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1371	' factor: ',F5.3/ &
	1372	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1373	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1374	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1375	255 FORMAT (' Subdomains have equal size')
	1376	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1377	'have smaller sizes'/ &
	1378	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1379	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1380	' degrees')
	1381	270 FORMAT (//' Topography informations:'/ &
	1382	' -----------------------'// &
	1383	1X,'Topography: ',A)
	1384	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1385	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1386	' / ',I4)
[138]	1387	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1388	' ------------------------------'// &
	1389	' Canopy mode: ', A / &
	1390	' Canopy top: ',I4 / &
	1391	' Leaf drag coefficient: ',F6.2 /)
[153]	1392	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1393	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1394	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1395	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1396	' Height: ',A,' m'/ &
	1397	' Leaf area density: ',A,' m2/m3'/ &
	1398	' Gradient: ',A,' m2/m4'/ &
	1399	' Gridpoint: ',A)
	1400
[1]	1401	300 FORMAT (//' Boundary conditions:'/ &
	1402	' -------------------'// &
	1403	' p uv ', &
	1404	' pt'// &
	1405	' B. bound.: ',A/ &
	1406	' T. bound.: ',A)
[97]	1407	301 FORMAT (/' ',A// &
[1]	1408	' B. bound.: ',A/ &
	1409	' T. bound.: ',A)
[19]	1410	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1411	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1412	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1413	'computational u,v-level:'// &
[1]	1414	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1415	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1416	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1417	307 FORMAT (' Heatflux has a random normal distribution')
	1418	308 FORMAT (' Predefined surface temperature')
[97]	1419	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1420	310 FORMAT (//' 1D-Model:'// &
	1421	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1422	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1423	312 FORMAT (' Predefined surface humidity')
	1424	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1425	314 FORMAT (' Predefined scalar value at the surface')
[19]	1426	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1427	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1428	'atmosphere model')
[1]	1429	317 FORMAT (//' Lateral boundaries:'/ &
	1430	' left/right: ',A/ &
	1431	' north/south: ',A)
	1432	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1433	'max =',F5.1,' m**2/s')
[151]	1434	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1435	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1436	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1437	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1438	' v: ',F9.6,' m2/s2')
[151]	1439	325 FORMAT (//' List output:'/ &
[1]	1440	' -----------'// &
	1441	' 1D-Profiles:'/ &
	1442	' Output every ',F8.2,' s')
[151]	1443	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1444	' Averaging input every ',F8.2,' s')
	1445	330 FORMAT (//' Data output:'/ &
	1446	' -----------'/)
	1447	331 FORMAT (/' 1D-Profiles:')
	1448	332 FORMAT (/' ',A)
	1449	333 FORMAT (' Output every ',F8.2,' s',/ &
	1450	' Time averaged over ',F8.2,' s'/ &
	1451	' Averaging input every ',F8.2,' s')
	1452	334 FORMAT (/' 2D-Arrays',A,':')
	1453	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1454	' Output every ',F8.2,' s ',A/ &
	1455	' Cross sections at ',A1,' = ',A/ &
	1456	' scalar-coordinates: ',A,' m'/)
	1457	336 FORMAT (/' 3D-Arrays',A,':')
	1458	337 FORMAT (/' Arrays: ',A/ &
	1459	' Output every ',F8.2,' s ',A/ &
	1460	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1461	338 FORMAT (' Compressed data output'/ &
	1462	' Decimal precision: ',A/)
	1463	339 FORMAT (' No output during initial ',F8.2,' s')
	1464	340 FORMAT (/' Time series:')
	1465	341 FORMAT (' Output every ',F8.2,' s'/)
	1466	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1467	' Output every ',F8.2,' s ',A/ &
	1468	' Time averaged over ',F8.2,' s'/ &
	1469	' Averaging input every ',F8.2,' s'/ &
	1470	' Cross sections at ',A1,' = ',A/ &
	1471	' scalar-coordinates: ',A,' m'/)
	1472	343 FORMAT (/' Arrays: ',A/ &
	1473	' Output every ',F8.2,' s ',A/ &
	1474	' Time averaged over ',F8.2,' s'/ &
	1475	' Averaging input every ',F8.2,' s'/ &
	1476	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1477	345 FORMAT (' Output format: ',A/)
	1478	#if defined( __dvrp_graphics )
	1479	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1480	' Output every ',F7.1,' s'/ &
	1481	' Output mode: ',A/ &
	1482	' Host / User: ',A,' / ',A/ &
	1483	' Directory: ',A// &
	1484	' The sequence contains:')
	1485	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1486	362 FORMAT (' Sectional plane ',A)
	1487	363 FORMAT (' Particles')
	1488	#endif
	1489	#if defined( __spectra )
	1490	370 FORMAT (' Spectra:')
	1491	371 FORMAT (' Output every ',F7.1,' s'/)
	1492	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1493	' Directions: ', 10(A5,',')/ &
	1494	' height levels k = ', 9(I3,','),I3,'.'/ &
	1495	' height levels selected for standard plot:'/ &
	1496	' k = ', 9(I3,','),I3,'.'/ &
	1497	' Time averaged over ', F7.1, ' s,' / &
	1498	' Profiles for the time averaging are taken every ', &
	1499	F6.1,' s')
	1500	#endif
	1501	400 FORMAT (//' Physical quantities:'/ &
	1502	' -------------------'/)
	1503	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1504	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1505	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1506	' f* = ',F9.6,' 1/s')
	1507	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1508	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1509	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1510	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1511	' ------------------------'/)
[57]	1512	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1513	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1514	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1515	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1516	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1517	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1518	' Height: ',A,' m'/ &
	1519	' Temperature: ',A,' K'/ &
	1520	' Gradient: ',A,' K/100m'/ &
	1521	' Gridpoint: ',A)
	1522	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1523	' Height: ',A,' m'/ &
	1524	' Humidity: ',A,' kg/kg'/ &
	1525	' Gradient: ',A,' (kg/kg)/100m'/ &
	1526	' Gridpoint: ',A)
	1527	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1528	' Height: ',A,' m'/ &
	1529	' Scalar concentration: ',A,' kg/m**3'/ &
	1530	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1531	' Gridpoint: ',A)
	1532	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1533	' Height: ',A,' m'/ &
	1534	' ug: ',A,' m/s'/ &
	1535	' Gradient: ',A,' 1/100s'/ &
	1536	' Gridpoint: ',A)
	1537	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1538	' Height: ',A,' m'/ &
[97]	1539	' vg: ',A,' m/s'/ &
[1]	1540	' Gradient: ',A,' 1/100s'/ &
	1541	' Gridpoint: ',A)
[97]	1542	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1543	' Height: ',A,' m'/ &
	1544	' Salinity: ',A,' psu'/ &
	1545	' Gradient: ',A,' psu/100m'/ &
	1546	' Gridpoint: ',A)
[1]	1547	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1548	' ---------------------------'/)
	1549	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1550	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1551	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1552	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1553	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1554	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1555	470 FORMAT (//' Actions during the simulation:'/ &
	1556	' -----------------------------'/)
[94]	1557	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1558	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1559	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1560	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1561	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1562	' to i/j =',I4)
	1563	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1564	1X,F5.3, ' m2/s2')
	1565	474 FORMAT (' Random number generator used : ',A/)
	1566	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1567	'respectively, if'/ &
	1568	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1569	' 3D-simulation'/)
	1570	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1571	'respectively, if the'/ &
	1572	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1573	' the 3D-simulation'/)
	1574	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1575	'respectively, if the'/ &
	1576	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1577	' the 3D-simulation'/)
	1578	480 FORMAT (' Particles:'/ &
	1579	' ---------'// &
	1580	' Particle advection is active (switched on at t = ', F7.1, &
	1581	' s)'/ &
	1582	' Start of new particle generations every ',F6.1,' s'/ &
	1583	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1584	' bottom: ', A, ' top: ', A/&
	1585	' Maximum particle age: ',F9.1,' s'/ &
[117]	1586	' Advection stopped at t = ',F9.1,' s'/ &
	1587	' Particles are sorted every ',F9.1,' s'/)
[1]	1588	481 FORMAT (' Particles have random start positions'/)
	1589	482 FORMAT (' Particles are advected only horizontally'/)
	1590	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1591	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1592	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1593	' Maximum age of the end of the tail: ',F8.2,' s')
	1594	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1595	486 FORMAT (' Particle statistics are written on file'/)
	1596	487 FORMAT (' Number of particle groups: ',I2/)
	1597	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1598	' minimum timestep for advection: ', F7.5/)
	1599	489 FORMAT (' Number of particles simultaneously released at each ', &
	1600	'point: ', I5/)
	1601	490 FORMAT (' Particle group ',I2,':'/ &
	1602	' Particle radius: ',E10.3, 'm')
	1603	491 FORMAT (' Particle inertia is activated'/ &
	1604	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1605	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1606	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1607	' y:',F8.1,' - ',F8.1,' m'/&
	1608	' z:',F8.1,' - ',F8.1,' m'/&
	1609	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1610	' m dz = ',F8.1,' m'/)
	1611	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1612	F8.2,' s'/)
	1613	495 FORMAT (' Number of particles in total domain: ',I10/)
	1614	500 FORMAT (//' 1D-Model parameters:'/ &
	1615	' -------------------'// &
	1616	' Simulation time: ',F8.1,' s'/ &
	1617	' Run-controll output every: ',F8.1,' s'/ &
	1618	' Vertical profile output every: ',F8.1,' s'/ &
	1619	' Mixing length calculation: ',A/ &
	1620	' Dissipation calculation: ',A/)
	1621	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1622
	1623
	1624	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |