Home

Context Navigation

header.f90 @ 141

Last change on this file since 141 was 139, checked in by raasch, 17 years ago

New:
---

Plant canopy model of Watanabe (2004,BLM 112,307-341) added.
It can be switched on by the inipar parameter plant_canopy.
The inipar parameter canopy_mode can be used to prescribe a
plant canopy type. The default case is a homogeneous plant
canopy. Heterogeneous distributions of the leaf area
density and the canopy drag coefficient can be defined in the
new routine user_init_plant_canopy (user_interface).
The inipar parameters lad_surface, lad_vertical_gradient and
lad_vertical_gradient_level can be used in order to
prescribe the vertical profile of leaf area density. The
inipar parameter drag_coefficient determines the canopy
drag coefficient.
Finally, the inipar parameter pch_index determines the
index of the upper boundary of the plant canopy.

Allow new case bc_uv_t = 'dirichlet_0' for channel flow.

For unknown variables (CASE DEFAULT) call new subroutine user_data_output_dvrp

Pressure boundary conditions for vertical walls added to the multigrid solver.
They are applied using new wall flag arrays (wall_flags_..) which are defined
for each grid level. New argument gls added to routine user_init_grid
(user_interface).

Frequence of sorting particles can be controlled with new particles_par
parameter dt_sort_particles. Sorting is moved from the SGS timestep loop in
advec_particles after the end of this loop.

advec_particles, check_parameters, data_output_dvrp, header, init_3d_model, init_grid, init_particles, init_pegrid, modules, package_parin, parin, plant_canopy_model, read_var_list, read_3d_binary, user_interface, write_var_list, write_3d_binary

Changed:

Redefine initial nzb_local as the actual total size of topography (later the
extent of topography in nzb_local is reduced by 1dx at the E topography walls
and by 1dy at the N topography walls to form the basis for nzb_s_inner);
for consistency redefine 'single_building' case.

Vertical profiles now based on nzb_s_inner; they are divided by
ngp_2dh_s_inner (scalars, procucts of scalars) and ngp_2dh (staggered velocity
components and their products, procucts of scalars and velocity components),
respectively.

Allow two instead of one digit to specify isosurface and slicer variables.

Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d (check_open)

prognostic_equations include the respective wall_*flux in the parameter list of
calls of diffusion_s. Same as before, only the values of wall_heatflux(0:4)
can be assigned. At present, wall_humidityflux, wall_qflux, wall_salinityflux,
and wall_scalarflux are kept zero. diffusion_s uses the respective wall_*flux
instead of wall_heatflux. This update serves two purposes:

it avoids errors in calculations with humidity/scalar/salinity and prescribed

non-zero wall_heatflux,

it prepares PALM for a possible assignment of wall fluxes of

humidity/scalar/salinity in a future release.

buoyancy, check_open, data_output_dvrp, diffusion_s, diffusivities, flow_statistics, header, init_3d_model, init_dvrp, init_grid, modules, prognostic_equations

Errors:

Bugfix: summation of sums_l_l in diffusivities.

Several bugfixes in the ocean part: Initial density rho is calculated
(init_ocean). Error in initializing u_init and v_init removed
(check_parameters). Calculation of density flux now starts from
nzb+1 (production_e).

Bugfix: pleft/pright changed to pnorth/psouth in sendrecv of particle tail
numbers along y, small bugfixes in the SGS part (advec_particles)

Bugfix: model_string needed a default value (combine_plot_fields)

Bugfix: wavenumber calculation for even nx in routines maketri (poisfft)

Bugfix: assignment of fluxes at walls

Bugfix: absolute value of f must be used when calculating the Blackadar mixing length (init_1d_model)

advec_particles, check_parameters, combine_plot_fields, diffusion_s, diffusivities, init_ocean, init_1d_model, poisfft, production_e

Property svn:keywords set to Id

File size: 60.8 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[139]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 139 2007-11-29 09:37:41Z raasch $
[39]	11	!
[139]	12	! 138 2007-11-28 10:03:58Z letzel
	13	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	14	! Allow two instead of one digit to specify isosurface and slicer variables.
	15	! Output of sorting frequency of particles
	16	!
[110]	17	! 108 2007-08-24 15:10:38Z letzel
	18	! Output of informations for coupled model runs (boundary conditions etc.)
	19	! + output of momentumfluxes at the top boundary
	20	! Rayleigh damping for ocean, e_init
	21	!
[98]	22	! 97 2007-06-21 08:23:15Z raasch
	23	! Adjustments for the ocean version.
	24	! use_pt_reference renamed use_reference
	25	!
[90]	26	! 87 2007-05-22 15:46:47Z raasch
	27	! Bugfix: output of use_upstream_for_tke
	28	!
[83]	29	! 82 2007-04-16 15:40:52Z raasch
	30	! Preprocessor strings for different linux clusters changed to "lc",
	31	! routine local_flush is used for buffer flushing
	32	!
[77]	33	! 76 2007-03-29 00:58:32Z raasch
	34	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	35	! output of the loop optimization method, moisture renamed humidity,
	36	! output of subversion revision number
	37	!
[39]	38	! 19 2007-02-23 04:53:48Z raasch
	39	! Output of scalar flux applied at top boundary
	40	!
[3]	41	! RCS Log replace by Id keyword, revision history cleaned up
	42	!
[1]	43	! Revision 1.63 2006/08/22 13:53:13 raasch
	44	! Output of dz_max
	45	!
	46	! Revision 1.1 1997/08/11 06:17:20 raasch
	47	! Initial revision
	48	!
	49	!
	50	! Description:
	51	! ------------
	52	! Writing a header with all important informations about the actual run.
	53	! This subroutine is called three times, two times at the beginning
	54	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	55	! end of the run, then writing additional information about CPU-usage on file
	56	! header.
	57	!------------------------------------------------------------------------------!
	58
	59	USE arrays_3d
	60	USE control_parameters
	61	USE cloud_parameters
	62	USE cpulog
	63	USE dvrp_variables
	64	USE grid_variables
	65	USE indices
	66	USE model_1d
	67	USE particle_attributes
	68	USE pegrid
	69	USE spectrum
	70
	71	IMPLICIT NONE
	72
	73	CHARACTER (LEN=1) :: prec
	74	CHARACTER (LEN=2) :: do2d_mode
	75	CHARACTER (LEN=5) :: section_chr
	76	CHARACTER (LEN=9) :: time_to_string
	77	CHARACTER (LEN=10) :: coor_chr, host_chr
	78	CHARACTER (LEN=16) :: begin_chr
[75]	79	CHARACTER (LEN=21) :: ver_rev
[1]	80	CHARACTER (LEN=40) :: output_format
	81	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	82	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[138]	83	run_classification, slices, temperatures, learde, &
[1]	84	ugcomponent, vgcomponent
	85	CHARACTER (LEN=85) :: roben, runten
	86
	87	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	88	REAL :: cpuseconds_per_simulated_second
	89
	90	!
	91	!-- Open the output file. At the end of the simulation, output is directed
	92	!-- to unit 19.
	93	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	94	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	95	io = 15 ! header output on file RUN_CONTROL
	96	ELSE
	97	io = 19 ! header output on file HEADER
	98	ENDIF
	99	CALL check_open( io )
	100
	101	!
	102	!-- At the end of the run, output file (HEADER) will be rewritten with
	103	!-- new informations
	104	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	105
	106	!
	107	!-- Determine kind of model run
	108	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	109	run_classification = '3D - restart run'
	110	ELSE
	111	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	112	run_classification = '3D - run without 1D - prerun'
	113	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	114	run_classification = '3D - run with 1D - prerun'
	115	ELSE
	116	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	117	ENDIF
	118	ENDIF
[97]	119	IF ( ocean ) THEN
	120	run_classification = 'ocean - ' // run_classification
	121	ELSE
	122	run_classification = 'atmosphere - ' // run_classification
	123	ENDIF
[1]	124
	125	!
	126	!-- Run-identification, date, time, host
	127	host_chr = host(1:10)
[75]	128	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	129	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	130	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	131	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	132	ADJUSTR( host_chr )
[1]	133	#if defined( __parallel )
	134	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	135	char1 = 'calculated'
	136	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	137	host(1:2) == 'lc' ) .AND. &
	138	npex == -1 .AND. pdims(2) == 1 ) THEN
	139	char1 = 'forced'
	140	ELSE
	141	char1 = 'predefined'
	142	ENDIF
	143	IF ( threads_per_task == 1 ) THEN
[102]	144	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	145	ELSE
[102]	146	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	147	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	148	ENDIF
	149	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	150	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	151	npex == -1 .AND. pdims(2) == 1 ) &
	152	THEN
[102]	153	WRITE ( io, 106 )
[1]	154	ELSEIF ( pdims(2) == 1 ) THEN
[102]	155	WRITE ( io, 107 ) 'x'
[1]	156	ELSEIF ( pdims(1) == 1 ) THEN
[102]	157	WRITE ( io, 107 ) 'y'
[1]	158	ENDIF
[102]	159	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	160	#endif
	161	WRITE ( io, 99 )
	162
	163	!
	164	!-- Numerical schemes
	165	WRITE ( io, 110 )
	166	IF ( psolver(1:7) == 'poisfft' ) THEN
	167	WRITE ( io, 111 ) TRIM( fft_method )
	168	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	169	ELSEIF ( psolver == 'sor' ) THEN
	170	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	171	ELSEIF ( psolver == 'multigrid' ) THEN
	172	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	173	IF ( mg_cycles == -1 ) THEN
	174	WRITE ( io, 140 ) residual_limit
	175	ELSE
	176	WRITE ( io, 141 ) mg_cycles
	177	ENDIF
	178	IF ( mg_switch_to_pe0_level == 0 ) THEN
	179	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	180	nzt_mg(1)
	181	ELSE
	182	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	183	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	184	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	185	nzt_mg(mg_switch_to_pe0_level), &
	186	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	187	nzt_mg(1)
	188	ENDIF
	189	ENDIF
	190	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	191	THEN
	192	WRITE ( io, 142 )
	193	ENDIF
	194
	195	IF ( momentum_advec == 'pw-scheme' ) THEN
	196	WRITE ( io, 113 )
	197	ELSE
	198	WRITE ( io, 114 )
	199	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	200	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	201	overshoot_limit_w /= 0.0 ) THEN
	202	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	203	overshoot_limit_w
	204	ENDIF
	205	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	206	ups_limit_w /= 0.0 ) &
	207	THEN
	208	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	209	ENDIF
	210	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	211	ENDIF
	212	IF ( scalar_advec == 'pw-scheme' ) THEN
	213	WRITE ( io, 116 )
	214	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	215	WRITE ( io, 117 )
	216	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	217	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	218	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	219	ENDIF
	220	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	221	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	222	ENDIF
	223	ELSE
	224	WRITE ( io, 118 )
	225	ENDIF
[63]	226
	227	WRITE ( io, 139 ) TRIM( loop_optimization )
	228
[1]	229	IF ( galilei_transformation ) THEN
	230	IF ( use_ug_for_galilei_tr ) THEN
	231	char1 = 'geostrophic wind'
	232	ELSE
	233	char1 = 'mean wind in model domain'
	234	ENDIF
	235	IF ( simulated_time_at_begin == simulated_time ) THEN
	236	char2 = 'at the start of the run'
	237	ELSE
	238	char2 = 'at the end of the run'
	239	ENDIF
	240	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	241	advected_distance_x/1000.0, advected_distance_y/1000.0
	242	ENDIF
	243	IF ( timestep_scheme == 'leapfrog' ) THEN
	244	WRITE ( io, 120 )
	245	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	246	WRITE ( io, 121 )
	247	ELSE
	248	WRITE ( io, 122 ) timestep_scheme
	249	ENDIF
[87]	250	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	251	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	252	IF ( .NOT. ocean ) THEN
	253	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	254	rayleigh_damping_factor
	255	ELSE
	256	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	257	rayleigh_damping_factor
	258	ENDIF
[1]	259	ENDIF
[75]	260	IF ( humidity ) THEN
[1]	261	IF ( .NOT. cloud_physics ) THEN
	262	WRITE ( io, 129 )
	263	ELSE
	264	WRITE ( io, 130 )
	265	WRITE ( io, 131 )
	266	IF ( radiation ) WRITE ( io, 132 )
	267	IF ( precipitation ) WRITE ( io, 133 )
	268	ENDIF
	269	ENDIF
	270	IF ( passive_scalar ) WRITE ( io, 134 )
	271	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	272	WRITE ( io, 99 )
	273
	274	!
	275	!-- Runtime and timestep informations
	276	WRITE ( io, 200 )
	277	IF ( .NOT. dt_fixed ) THEN
	278	WRITE ( io, 201 ) dt_max, cfl_factor
	279	ELSE
	280	WRITE ( io, 202 ) dt
	281	ENDIF
	282	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	283
	284	IF ( time_restart /= 9999999.9 .AND. &
	285	simulated_time_at_begin == simulated_time ) THEN
	286	IF ( dt_restart == 9999999.9 ) THEN
	287	WRITE ( io, 204 ) ' Restart at: ',time_restart
	288	ELSE
	289	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	290	ENDIF
	291	ENDIF
	292
	293	IF ( simulated_time_at_begin /= simulated_time ) THEN
	294	i = MAX ( log_point_s(10)%counts, 1 )
	295	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	296	cpuseconds_per_simulated_second = 0.0
	297	ELSE
	298	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	299	( simulated_time - &
	300	simulated_time_at_begin )
	301	ENDIF
	302	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	303	log_point_s(10)%sum / REAL( i ), &
	304	cpuseconds_per_simulated_second
	305	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	306	IF ( dt_restart == 9999999.9 ) THEN
	307	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	308	ELSE
	309	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	310	ENDIF
	311	ENDIF
	312	ENDIF
	313
	314	!
	315	!-- Computational grid
[94]	316	IF ( .NOT. ocean ) THEN
	317	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	318	IF ( dz_stretch_level_index < nzt+1 ) THEN
	319	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	320	dz_stretch_factor, dz_max
	321	ENDIF
	322	ELSE
	323	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	324	IF ( dz_stretch_level_index > 0 ) THEN
	325	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	326	dz_stretch_factor, dz_max
	327	ENDIF
[1]	328	ENDIF
	329	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	330	MIN( nnz+2, nzt+2 )
[76]	331	IF ( numprocs > 1 ) THEN
	332	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	333	WRITE ( io, 255 )
	334	ELSE
	335	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	336	ENDIF
[1]	337	ENDIF
	338	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	339
	340	!
	341	!-- Topography
	342	WRITE ( io, 270 ) topography
	343	SELECT CASE ( TRIM( topography ) )
	344
	345	CASE ( 'flat' )
	346	! no actions necessary
	347
	348	CASE ( 'single_building' )
	349	blx = INT( building_length_x / dx )
	350	bly = INT( building_length_y / dy )
	351	bh = INT( building_height / dz )
	352
	353	IF ( building_wall_left == 9999999.9 ) THEN
	354	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	355	ENDIF
	356	bxl = INT ( building_wall_left / dx + 0.5 )
	357	bxr = bxl + blx
	358
	359	IF ( building_wall_south == 9999999.9 ) THEN
	360	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	361	ENDIF
	362	bys = INT ( building_wall_south / dy + 0.5 )
	363	byn = bys + bly
	364
	365	WRITE ( io, 271 ) building_length_x, building_length_y, &
	366	building_height, bxl, bxr, bys, byn
	367
	368	END SELECT
	369
[138]	370	IF ( plant_canopy ) THEN
	371
	372	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
	373
[1]	374	!
[138]	375	!-- Leaf area density profile
	376	!-- Building output strings, starting with surface value
	377	WRITE ( learde, '(F6.2)' ) lad_surface
	378	gradients = '------'
	379	slices = ' 0'
	380	coordinates = ' 0.0'
	381	i = 1
	382	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	383
	384	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	385	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	386
	387	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	388	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	389
	390	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	391	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	392
	393	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	394	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	395
	396	i = i + 1
	397	ENDDO
	398
	399	WRITE ( io, 281 ) TRIM( coordinates ), TRIM( learde ), &
	400	TRIM( gradients ), TRIM( slices )
	401
	402	ENDIF
	403
	404	!
[1]	405	!-- Boundary conditions
	406	IF ( ibc_p_b == 0 ) THEN
	407	runten = 'p(0) = 0 \|'
	408	ELSEIF ( ibc_p_b == 1 ) THEN
	409	runten = 'p(0) = p(1) \|'
	410	ELSE
	411	runten = 'p(0) = p(1) +R\|'
	412	ENDIF
	413	IF ( ibc_p_t == 0 ) THEN
	414	roben = 'p(nzt+1) = 0 \|'
	415	ELSE
	416	roben = 'p(nzt+1) = p(nzt) \|'
	417	ENDIF
	418
	419	IF ( ibc_uv_b == 0 ) THEN
	420	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	421	ELSE
	422	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	423	ENDIF
[132]	424	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	425	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	426	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	427	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	428	ELSE
	429	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	430	ENDIF
	431
	432	IF ( ibc_pt_b == 0 ) THEN
	433	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	434	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	435	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	436	ELSEIF ( ibc_pt_b == 2 ) THEN
	437	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	438	ENDIF
	439	IF ( ibc_pt_t == 0 ) THEN
[19]	440	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	441	ELSEIF( ibc_pt_t == 1 ) THEN
	442	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	443	ELSEIF( ibc_pt_t == 2 ) THEN
	444	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	445	ENDIF
	446
	447	WRITE ( io, 300 ) runten, roben
	448
	449	IF ( .NOT. constant_diffusion ) THEN
	450	IF ( ibc_e_b == 1 ) THEN
	451	runten = 'e(0) = e(1)'
	452	ELSE
	453	runten = 'e(0) = e(1) = (u/0.1)*2'
	454	ENDIF
	455	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	456
[97]	457	WRITE ( io, 301 ) 'e', runten, roben
[1]	458
	459	ENDIF
	460
[97]	461	IF ( ocean ) THEN
	462	runten = 'sa(0) = sa(1)'
	463	IF ( ibc_sa_t == 0 ) THEN
	464	roben = 'sa(nzt+1) = sa_surface'
[1]	465	ELSE
[97]	466	roben = 'sa(nzt+1) = sa(nzt)'
[1]	467	ENDIF
[97]	468	WRITE ( io, 301 ) 'sa', runten, roben
	469	ENDIF
[1]	470
[97]	471	IF ( humidity ) THEN
	472	IF ( ibc_q_b == 0 ) THEN
	473	runten = 'q(0) = q_surface'
	474	ELSE
	475	runten = 'q(0) = q(1)'
	476	ENDIF
	477	IF ( ibc_q_t == 0 ) THEN
	478	roben = 'q(nzt) = q_top'
	479	ELSE
	480	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	481	ENDIF
	482	WRITE ( io, 301 ) 'q', runten, roben
	483	ENDIF
[1]	484
[97]	485	IF ( passive_scalar ) THEN
	486	IF ( ibc_q_b == 0 ) THEN
	487	runten = 's(0) = s_surface'
	488	ELSE
	489	runten = 's(0) = s(1)'
	490	ENDIF
	491	IF ( ibc_q_t == 0 ) THEN
	492	roben = 's(nzt) = s_top'
	493	ELSE
	494	roben = 's(nzt) = s(nzt-1) + ds/dz'
	495	ENDIF
	496	WRITE ( io, 301 ) 's', runten, roben
[1]	497	ENDIF
	498
	499	IF ( use_surface_fluxes ) THEN
	500	WRITE ( io, 303 )
	501	IF ( constant_heatflux ) THEN
	502	WRITE ( io, 306 ) surface_heatflux
	503	IF ( random_heatflux ) WRITE ( io, 307 )
	504	ENDIF
[75]	505	IF ( humidity .AND. constant_waterflux ) THEN
[1]	506	WRITE ( io, 311 ) surface_waterflux
	507	ENDIF
	508	IF ( passive_scalar .AND. constant_waterflux ) THEN
	509	WRITE ( io, 313 ) surface_waterflux
	510	ENDIF
	511	ENDIF
	512
[19]	513	IF ( use_top_fluxes ) THEN
	514	WRITE ( io, 304 )
[102]	515	IF ( coupling_mode == 'uncoupled' ) THEN
[103]	516	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
[102]	517	IF ( constant_top_heatflux ) THEN
	518	WRITE ( io, 306 ) top_heatflux
	519	ENDIF
	520	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	521	WRITE ( io, 316 )
[19]	522	ENDIF
[97]	523	IF ( ocean .AND. constant_top_salinityflux ) THEN
	524	WRITE ( io, 309 ) top_salinityflux
	525	ENDIF
[75]	526	IF ( humidity .OR. passive_scalar ) THEN
[19]	527	WRITE ( io, 315 )
	528	ENDIF
	529	ENDIF
	530
[1]	531	IF ( prandtl_layer ) THEN
[94]	532	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	533	rif_min, rif_max
[1]	534	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	535	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	536	WRITE ( io, 312 )
	537	ENDIF
	538	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	539	WRITE ( io, 314 )
	540	ENDIF
	541	ELSE
	542	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	543	WRITE ( io, 310 ) rif_min, rif_max
	544	ENDIF
	545	ENDIF
	546
	547	WRITE ( io, 317 ) bc_lr, bc_ns
	548	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	549	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	550	ENDIF
	551
	552	!
	553	!-- Listing of 1D-profiles
	554	WRITE ( io, 320 ) dt_dopr_listing
	555	IF ( averaging_interval_pr /= 0.0 ) THEN
	556	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	557	ENDIF
	558
	559	!
	560	!-- DATA output
	561	WRITE ( io, 330 )
	562	IF ( averaging_interval_pr /= 0.0 ) THEN
	563	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	564	ENDIF
	565
	566	!
	567	!-- 1D-profiles
	568	dopr_chr = 'Profile:'
	569	IF ( dopr_n /= 0 ) THEN
	570	WRITE ( io, 331 )
	571
	572	output_format = ''
	573	IF ( netcdf_output ) THEN
	574	IF ( netcdf_64bit ) THEN
	575	output_format = 'netcdf (64 bit offset)'
	576	ELSE
	577	output_format = 'netcdf'
	578	ENDIF
	579	ENDIF
	580	IF ( profil_output ) THEN
	581	IF ( netcdf_output ) THEN
	582	output_format = TRIM( output_format ) // ' and profil'
	583	ELSE
	584	output_format = 'profil'
	585	ENDIF
	586	ENDIF
	587	WRITE ( io, 345 ) output_format
	588
	589	DO i = 1, dopr_n
	590	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	591	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	592	WRITE ( io, 332 ) dopr_chr
	593	dopr_chr = ' :'
	594	ENDIF
	595	ENDDO
	596
	597	IF ( dopr_chr /= '' ) THEN
	598	WRITE ( io, 332 ) dopr_chr
	599	ENDIF
	600	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	601	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	602	ENDIF
	603
	604	!
	605	!-- 2D-arrays
	606	DO av = 0, 1
	607
	608	i = 1
	609	do2d_xy = ''
	610	do2d_xz = ''
	611	do2d_yz = ''
	612	DO WHILE ( do2d(av,i) /= ' ' )
	613
	614	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	615	do2d_mode = do2d(av,i)(l-1:l)
	616
	617	SELECT CASE ( do2d_mode )
	618	CASE ( 'xy' )
	619	ll = LEN_TRIM( do2d_xy )
	620	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	621	CASE ( 'xz' )
	622	ll = LEN_TRIM( do2d_xz )
	623	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	624	CASE ( 'yz' )
	625	ll = LEN_TRIM( do2d_yz )
	626	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	627	END SELECT
	628
	629	i = i + 1
	630
	631	ENDDO
	632
	633	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	634	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	635	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	636	( netcdf_output .OR. iso2d_output ) ) THEN
	637
	638	IF ( av == 0 ) THEN
	639	WRITE ( io, 334 ) ''
	640	ELSE
	641	WRITE ( io, 334 ) '(time-averaged)'
	642	ENDIF
	643
	644	IF ( do2d_at_begin ) THEN
	645	begin_chr = 'and at the start'
	646	ELSE
	647	begin_chr = ''
	648	ENDIF
	649
	650	output_format = ''
	651	IF ( netcdf_output ) THEN
	652	IF ( netcdf_64bit ) THEN
	653	output_format = 'netcdf (64 bit offset)'
	654	ELSE
	655	output_format = 'netcdf'
	656	ENDIF
	657	ENDIF
	658	IF ( iso2d_output ) THEN
	659	IF ( netcdf_output ) THEN
	660	output_format = TRIM( output_format ) // ' and iso2d'
	661	ELSE
	662	output_format = 'iso2d'
	663	ENDIF
	664	ENDIF
	665	WRITE ( io, 345 ) output_format
	666
	667	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	668	i = 1
	669	slices = '/'
	670	coordinates = '/'
	671	!
	672	!-- Building strings with index and coordinate informations of the
	673	!-- slices
	674	DO WHILE ( section(i,1) /= -9999 )
	675
	676	WRITE (section_chr,'(I5)') section(i,1)
	677	section_chr = ADJUSTL( section_chr )
	678	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	679
	680	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	681	coor_chr = ADJUSTL( coor_chr )
	682	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	683
	684	i = i + 1
	685	ENDDO
	686	IF ( av == 0 ) THEN
	687	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	688	TRIM( begin_chr ), 'k', TRIM( slices ), &
	689	TRIM( coordinates )
	690	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	691	WRITE ( io, 339 ) skip_time_do2d_xy
	692	ENDIF
	693	ELSE
	694	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	695	TRIM( begin_chr ), averaging_interval, &
	696	dt_averaging_input, 'k', TRIM( slices ), &
	697	TRIM( coordinates )
	698	IF ( skip_time_data_output_av /= 0.0 ) THEN
	699	WRITE ( io, 339 ) skip_time_data_output_av
	700	ENDIF
	701	ENDIF
	702
	703	ENDIF
	704
	705	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	706	i = 1
	707	slices = '/'
	708	coordinates = '/'
	709	!
	710	!-- Building strings with index and coordinate informations of the
	711	!-- slices
	712	DO WHILE ( section(i,2) /= -9999 )
	713
	714	WRITE (section_chr,'(I5)') section(i,2)
	715	section_chr = ADJUSTL( section_chr )
	716	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	717
	718	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	719	coor_chr = ADJUSTL( coor_chr )
	720	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	721
	722	i = i + 1
	723	ENDDO
	724	IF ( av == 0 ) THEN
	725	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	726	TRIM( begin_chr ), 'j', TRIM( slices ), &
	727	TRIM( coordinates )
	728	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	729	WRITE ( io, 339 ) skip_time_do2d_xz
	730	ENDIF
	731	ELSE
	732	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	733	TRIM( begin_chr ), averaging_interval, &
	734	dt_averaging_input, 'j', TRIM( slices ), &
	735	TRIM( coordinates )
	736	IF ( skip_time_data_output_av /= 0.0 ) THEN
	737	WRITE ( io, 339 ) skip_time_data_output_av
	738	ENDIF
	739	ENDIF
	740	ENDIF
	741
	742	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	743	i = 1
	744	slices = '/'
	745	coordinates = '/'
	746	!
	747	!-- Building strings with index and coordinate informations of the
	748	!-- slices
	749	DO WHILE ( section(i,3) /= -9999 )
	750
	751	WRITE (section_chr,'(I5)') section(i,3)
	752	section_chr = ADJUSTL( section_chr )
	753	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	754
	755	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	756	coor_chr = ADJUSTL( coor_chr )
	757	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	758
	759	i = i + 1
	760	ENDDO
	761	IF ( av == 0 ) THEN
	762	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	763	TRIM( begin_chr ), 'i', TRIM( slices ), &
	764	TRIM( coordinates )
	765	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	766	WRITE ( io, 339 ) skip_time_do2d_yz
	767	ENDIF
	768	ELSE
	769	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	770	TRIM( begin_chr ), averaging_interval, &
	771	dt_averaging_input, 'i', TRIM( slices ), &
	772	TRIM( coordinates )
	773	IF ( skip_time_data_output_av /= 0.0 ) THEN
	774	WRITE ( io, 339 ) skip_time_data_output_av
	775	ENDIF
	776	ENDIF
	777	ENDIF
	778
	779	ENDIF
	780
	781	ENDDO
	782
	783	!
	784	!-- 3d-arrays
	785	DO av = 0, 1
	786
	787	i = 1
	788	do3d_chr = ''
	789	DO WHILE ( do3d(av,i) /= ' ' )
	790
	791	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	792	i = i + 1
	793
	794	ENDDO
	795
	796	IF ( do3d_chr /= '' ) THEN
	797	IF ( av == 0 ) THEN
	798	WRITE ( io, 336 ) ''
	799	ELSE
	800	WRITE ( io, 336 ) '(time-averaged)'
	801	ENDIF
	802
	803	output_format = ''
	804	IF ( netcdf_output ) THEN
[46]	805	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	806	output_format = 'netcdf (64 bit offset)'
	807	ELSE
	808	output_format = 'netcdf'
	809	ENDIF
	810	ENDIF
	811	IF ( avs_output ) THEN
	812	IF ( netcdf_output ) THEN
	813	output_format = TRIM( output_format ) // ' and avs'
	814	ELSE
	815	output_format = 'avs'
	816	ENDIF
	817	ENDIF
	818	WRITE ( io, 345 ) output_format
	819
	820	IF ( do3d_at_begin ) THEN
	821	begin_chr = 'and at the start'
	822	ELSE
	823	begin_chr = ''
	824	ENDIF
	825	IF ( av == 0 ) THEN
	826	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	827	zu(nz_do3d), nz_do3d
	828	ELSE
	829	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	830	TRIM( begin_chr ), averaging_interval, &
	831	dt_averaging_input, zu(nz_do3d), nz_do3d
	832	ENDIF
	833
	834	IF ( do3d_compress ) THEN
	835	do3d_chr = ''
	836	i = 1
	837	DO WHILE ( do3d(av,i) /= ' ' )
	838
	839	SELECT CASE ( do3d(av,i) )
	840	CASE ( 'u' )
	841	j = 1
	842	CASE ( 'v' )
	843	j = 2
	844	CASE ( 'w' )
	845	j = 3
	846	CASE ( 'p' )
	847	j = 4
	848	CASE ( 'pt' )
	849	j = 5
	850	END SELECT
	851	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	852	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	853	':' // prec // ','
	854	i = i + 1
	855
	856	ENDDO
	857	WRITE ( io, 338 ) do3d_chr
	858
	859	ENDIF
	860
	861	IF ( av == 0 ) THEN
	862	IF ( skip_time_do3d /= 0.0 ) THEN
	863	WRITE ( io, 339 ) skip_time_do3d
	864	ENDIF
	865	ELSE
	866	IF ( skip_time_data_output_av /= 0.0 ) THEN
	867	WRITE ( io, 339 ) skip_time_data_output_av
	868	ENDIF
	869	ENDIF
	870
	871	ENDIF
	872
	873	ENDDO
	874
	875	!
	876	!-- Timeseries
	877	IF ( dt_dots /= 9999999.9 ) THEN
	878	WRITE ( io, 340 )
	879
	880	output_format = ''
	881	IF ( netcdf_output ) THEN
	882	IF ( netcdf_64bit ) THEN
	883	output_format = 'netcdf (64 bit offset)'
	884	ELSE
	885	output_format = 'netcdf'
	886	ENDIF
	887	ENDIF
	888	IF ( profil_output ) THEN
	889	IF ( netcdf_output ) THEN
	890	output_format = TRIM( output_format ) // ' and profil'
	891	ELSE
	892	output_format = 'profil'
	893	ENDIF
	894	ENDIF
	895	WRITE ( io, 345 ) output_format
	896	WRITE ( io, 341 ) dt_dots
	897	ENDIF
	898
	899	#if defined( __dvrp_graphics )
	900	!
	901	!-- Dvrp-output
	902	IF ( dt_dvrp /= 9999999.9 ) THEN
	903	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	904	TRIM( dvrp_username ), TRIM( dvrp_directory )
	905	i = 1
	906	l = 0
	907	DO WHILE ( mode_dvrp(i) /= ' ' )
	908	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	909	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	910	l = l + 1
	911	IF ( do3d(0,j) /= ' ' ) THEN
	912	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	913	ENDIF
	914	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	915	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	916	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	917	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	918	WRITE ( io, 363 )
	919	ENDIF
	920	i = i + 1
	921	ENDDO
	922	ENDIF
	923	#endif
	924
	925	#if defined( __spectra )
	926	!
	927	!-- Spectra output
	928	IF ( dt_dosp /= 9999999.9 ) THEN
	929	WRITE ( io, 370 )
	930
	931	output_format = ''
	932	IF ( netcdf_output ) THEN
	933	IF ( netcdf_64bit ) THEN
	934	output_format = 'netcdf (64 bit offset)'
	935	ELSE
	936	output_format = 'netcdf'
	937	ENDIF
	938	ENDIF
	939	IF ( profil_output ) THEN
	940	IF ( netcdf_output ) THEN
	941	output_format = TRIM( output_format ) // ' and profil'
	942	ELSE
	943	output_format = 'profil'
	944	ENDIF
	945	ENDIF
	946	WRITE ( io, 345 ) output_format
	947	WRITE ( io, 371 ) dt_dosp
	948	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	949	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	950	( spectra_direction(i), i = 1,10 ), &
	951	( comp_spectra_level(i), i = 1,10 ), &
	952	( plot_spectra_level(i), i = 1,10 ), &
	953	averaging_interval_sp, dt_averaging_input_pr
	954	ENDIF
	955	#endif
	956
	957	WRITE ( io, 99 )
	958
	959	!
	960	!-- Physical quantities
	961	WRITE ( io, 400 )
	962
	963	!
	964	!-- Geostrophic parameters
	965	WRITE ( io, 410 ) omega, phi, f, fs
	966
	967	!
	968	!-- Other quantities
	969	WRITE ( io, 411 ) g
[97]	970	IF ( use_reference ) THEN
	971	IF ( ocean ) THEN
	972	WRITE ( io, 412 ) prho_reference
	973	ELSE
	974	WRITE ( io, 413 ) pt_reference
	975	ENDIF
	976	ENDIF
[1]	977
	978	!
	979	!-- Cloud physics parameters
	980	IF ( cloud_physics ) THEN
[57]	981	WRITE ( io, 415 )
	982	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	983	ENDIF
	984
	985	!-- Profile of the geostrophic wind (component ug)
	986	!-- Building output strings
	987	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	988	gradients = '------'
	989	slices = ' 0'
	990	coordinates = ' 0.0'
	991	i = 1
	992	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	993
	994	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	995	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	996
	997	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	998	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	999
	1000	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	1001	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1002
	1003	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	1004	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1005
	1006	i = i + 1
	1007	ENDDO
	1008
	1009	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1010	TRIM( gradients ), TRIM( slices )
	1011
	1012	!-- Profile of the geostrophic wind (component vg)
	1013	!-- Building output strings
	1014	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1015	gradients = '------'
	1016	slices = ' 0'
	1017	coordinates = ' 0.0'
	1018	i = 1
	1019	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1020
	1021	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	1022	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1023
	1024	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	1025	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1026
	1027	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	1028	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1029
	1030	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	1031	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1032
	1033	i = i + 1
	1034	ENDDO
	1035
	1036	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1037	TRIM( gradients ), TRIM( slices )
	1038
	1039	!
	1040	!-- Initial temperature profile
	1041	!-- Building output strings, starting with surface temperature
	1042	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1043	gradients = '------'
	1044	slices = ' 0'
	1045	coordinates = ' 0.0'
	1046	i = 1
	1047	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1048
[94]	1049	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1050	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1051
[94]	1052	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1053	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1054
[94]	1055	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1056	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1057
[94]	1058	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1059	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1060
	1061	i = i + 1
	1062	ENDDO
	1063
	1064	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1065	TRIM( gradients ), TRIM( slices )
	1066
	1067	!
	1068	!-- Initial humidity profile
	1069	!-- Building output strings, starting with surface humidity
[75]	1070	IF ( humidity .OR. passive_scalar ) THEN
[1]	1071	WRITE ( temperatures, '(E8.1)' ) q_surface
	1072	gradients = '--------'
	1073	slices = ' 0'
	1074	coordinates = ' 0.0'
	1075	i = 1
	1076	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1077
	1078	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1079	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1080
	1081	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1082	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1083
	1084	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1085	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1086
	1087	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1088	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1089
	1090	i = i + 1
	1091	ENDDO
	1092
[75]	1093	IF ( humidity ) THEN
[1]	1094	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1095	TRIM( gradients ), TRIM( slices )
	1096	ELSE
	1097	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1098	TRIM( gradients ), TRIM( slices )
	1099	ENDIF
	1100	ENDIF
	1101
	1102	!
[97]	1103	!-- Initial salinity profile
	1104	!-- Building output strings, starting with surface salinity
	1105	IF ( ocean ) THEN
	1106	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1107	gradients = '------'
	1108	slices = ' 0'
	1109	coordinates = ' 0.0'
	1110	i = 1
	1111	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1112
	1113	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1114	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1115
	1116	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1117	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1118
	1119	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1120	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1121
	1122	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1123	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1124
	1125	i = i + 1
	1126	ENDDO
	1127
	1128	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1129	TRIM( gradients ), TRIM( slices )
	1130	ENDIF
	1131
	1132	!
[1]	1133	!-- LES / turbulence parameters
	1134	WRITE ( io, 450 )
	1135
	1136	!--
	1137	! ... LES-constants used must still be added here
	1138	!--
	1139	IF ( constant_diffusion ) THEN
	1140	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1141	prandtl_number
	1142	ENDIF
	1143	IF ( .NOT. constant_diffusion) THEN
[108]	1144	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1145	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1146	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1147	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1148	ENDIF
	1149
	1150	!
	1151	!-- Special actions during the run
	1152	WRITE ( io, 470 )
	1153	IF ( create_disturbances ) THEN
	1154	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1155	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1156	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1157	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1158	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1159	ELSE
	1160	WRITE ( io, 473 ) disturbance_energy_limit
	1161	ENDIF
	1162	WRITE ( io, 474 ) TRIM( random_generator )
	1163	ENDIF
	1164	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1165	WRITE ( io, 475 ) pt_surface_initial_change
	1166	ENDIF
[75]	1167	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1168	WRITE ( io, 476 ) q_surface_initial_change
	1169	ENDIF
	1170	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1171	WRITE ( io, 477 ) q_surface_initial_change
	1172	ENDIF
	1173
[60]	1174	IF ( particle_advection ) THEN
[1]	1175	!
[60]	1176	!-- Particle attributes
	1177	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1178	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1179	end_time_prel, dt_sort_particles
[60]	1180	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1181	IF ( random_start_position ) WRITE ( io, 481 )
	1182	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1183	WRITE ( io, 495 ) total_number_of_particles
	1184	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1185	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1186	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1187	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1188	WRITE ( io, 484 ) total_number_of_tails, &
	1189	minimum_tailpoint_distance, &
	1190	maximum_tailpoint_age
	1191	ENDIF
[1]	1192	ENDIF
[60]	1193	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1194	WRITE ( io, 485 ) dt_write_particle_data
	1195	output_format = ''
	1196	IF ( netcdf_output ) THEN
	1197	IF ( netcdf_64bit ) THEN
	1198	output_format = 'netcdf (64 bit offset) and binary'
	1199	ELSE
	1200	output_format = 'netcdf and binary'
	1201	ENDIF
[1]	1202	ELSE
[60]	1203	output_format = 'binary'
[1]	1204	ENDIF
[60]	1205	WRITE ( io, 345 ) output_format
[1]	1206	ENDIF
[60]	1207	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1208	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1209
[60]	1210	WRITE ( io, 487 ) number_of_particle_groups
[1]	1211
[60]	1212	DO i = 1, number_of_particle_groups
	1213	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1214	WRITE ( io, 490 ) i, 0.0
	1215	WRITE ( io, 492 )
[1]	1216	ELSE
[60]	1217	WRITE ( io, 490 ) i, radius(i)
	1218	IF ( density_ratio(i) /= 0.0 ) THEN
	1219	WRITE ( io, 491 ) density_ratio(i)
	1220	ELSE
	1221	WRITE ( io, 492 )
	1222	ENDIF
[1]	1223	ENDIF
[60]	1224	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1225	pdx(i), pdy(i), pdz(i)
	1226	ENDDO
[1]	1227
[60]	1228	ENDIF
[1]	1229
[60]	1230
[1]	1231	!
	1232	!-- Parameters of 1D-model
	1233	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1234	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1235	mixing_length_1d, dissipation_1d
	1236	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1237	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1238	ENDIF
	1239	ENDIF
	1240
	1241	!
	1242	!-- User-defined informations
	1243	CALL user_header( io )
	1244
	1245	WRITE ( io, 99 )
	1246
	1247	!
	1248	!-- Write buffer contents to disc immediately
[82]	1249	CALL local_flush( io )
[1]	1250
	1251	!
	1252	!-- Here the FORMATs start
	1253
	1254	99 FORMAT (1X,78('-'))
[97]	1255	100 FORMAT (/1X,'*************************',11X,42('-')/ &
[75]	1256	1X,'* ',A,' *',11X,A/ &
[102]	1257	1X,'*************************',11X,42('-'))
	1258	101 FORMAT (37X,'coupled run: ',A/ &
	1259	37X,42('-'))
	1260	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
[1]	1261	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1262	' Run on host: ',A10)
	1263	#if defined( __parallel )
[102]	1264	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1265	')',1X,A)
[102]	1266	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1267	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1268	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1269	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1270	37X,'because the job is running on an SMP-cluster')
[102]	1271	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1272	#endif
	1273	110 FORMAT (/' Numerical Schemes:'/ &
	1274	' -----------------'/)
	1275	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1276	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1277	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1278	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1279	' or Upstream')
	1280	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1281	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1282	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1283	' or Upstream')
	1284	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1285	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1286	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1287	' Translation velocity = ',A/ &
	1288	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1289	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1290	' of timestep changes)')
	1291	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1292	' timestep changes')
	1293	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1294	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1295	' maximum damping coefficient: ',F5.3, ' 1/s')
	1296	124 FORMAT (' Spline-overshoots are being suppressed')
	1297	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1298	' of'/ &
	1299	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1300	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1301	' of'/ &
	1302	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1303	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1304	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1305	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1306	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1307	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1308	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1309	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1310	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1311	' effective emissivity scheme')
	1312	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1313	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1314	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1315	A,'-cycle)'/ &
	1316	' number of grid levels: ',I2/ &
	1317	' Gauss-Seidel red/black iterations: ',I2)
	1318	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1319	I3,')')
	1320	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1321	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1322	I3,')'/ &
	1323	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1324	I3,')')
	1325	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1326	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1327	140 FORMAT (' maximum residual allowed: ',E10.3)
	1328	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1329	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1330	'step')
[87]	1331	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1332	'kinetic energy')
[1]	1333	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1334	'conserved')
	1335	200 FORMAT (//' Run time and time step information:'/ &
	1336	' ----------------------------------'/)
	1337	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1338	' CFL-factor: ',F4.2)
	1339	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1340	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1341	' End time: ',F9.3,' s')
	1342	204 FORMAT ( A,F9.3,' s')
	1343	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1344	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1345	' CPU-time used: ',F9.3,' s per timestep: ', &
	1346	' ',F9.3,' s'/ &
	1347	' per second of simulated tim', &
	1348	'e: ',F9.3,' s')
	1349	250 FORMAT (//' Computational grid and domain size:'/ &
	1350	' ----------------------------------'// &
	1351	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1352	' m dz = ',F7.3,' m'/ &
	1353	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1354	' m z(u) = ',F10.3,' m'/)
	1355	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1356	' factor: ',F5.3/ &
	1357	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1358	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1359	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1360	255 FORMAT (' Subdomains have equal size')
	1361	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1362	'have smaller sizes'/ &
	1363	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1364	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1365	' degrees')
	1366	270 FORMAT (//' Topography informations:'/ &
	1367	' -----------------------'// &
	1368	1X,'Topography: ',A)
	1369	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1370	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1371	' / ',I4)
[138]	1372	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1373	' ------------------------------'// &
	1374	' Canopy mode: ', A / &
	1375	' Canopy top: ',I4 / &
	1376	' Leaf drag coefficient: ',F6.2 /)
	1377	281 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
	1378	' Height: ',A,' m'/ &
	1379	' Leaf area density: ',A,' m2/m3'/ &
	1380	' Gradient: ',A,' m2/m4'/ &
	1381	' Gridpoint: ',A)
	1382
[1]	1383	300 FORMAT (//' Boundary conditions:'/ &
	1384	' -------------------'// &
	1385	' p uv ', &
	1386	' pt'// &
	1387	' B. bound.: ',A/ &
	1388	' T. bound.: ',A)
[97]	1389	301 FORMAT (/' ',A// &
[1]	1390	' B. bound.: ',A/ &
	1391	' T. bound.: ',A)
[19]	1392	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1393	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1394	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1395	'computational u,v-level:'// &
[1]	1396	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1397	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1398	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1399	307 FORMAT (' Heatflux has a random normal distribution')
	1400	308 FORMAT (' Predefined surface temperature')
[97]	1401	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1402	310 FORMAT (//' 1D-Model:'// &
	1403	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1404	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1405	312 FORMAT (' Predefined surface humidity')
	1406	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1407	314 FORMAT (' Predefined scalar value at the surface')
[19]	1408	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1409	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1410	'atmosphere model')
[1]	1411	317 FORMAT (//' Lateral boundaries:'/ &
	1412	' left/right: ',A/ &
	1413	' north/south: ',A)
	1414	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1415	'max =',F5.1,' m**2/s')
[103]	1416	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
	1417	' v: ',F9.6,' m2/s2')
[1]	1418	320 FORMAT (//' List output:'/ &
	1419	' -----------'// &
	1420	' 1D-Profiles:'/ &
	1421	' Output every ',F8.2,' s')
	1422	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1423	' Averaging input every ',F8.2,' s')
	1424	330 FORMAT (//' Data output:'/ &
	1425	' -----------'/)
	1426	331 FORMAT (/' 1D-Profiles:')
	1427	332 FORMAT (/' ',A)
	1428	333 FORMAT (' Output every ',F8.2,' s',/ &
	1429	' Time averaged over ',F8.2,' s'/ &
	1430	' Averaging input every ',F8.2,' s')
	1431	334 FORMAT (/' 2D-Arrays',A,':')
	1432	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1433	' Output every ',F8.2,' s ',A/ &
	1434	' Cross sections at ',A1,' = ',A/ &
	1435	' scalar-coordinates: ',A,' m'/)
	1436	336 FORMAT (/' 3D-Arrays',A,':')
	1437	337 FORMAT (/' Arrays: ',A/ &
	1438	' Output every ',F8.2,' s ',A/ &
	1439	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1440	338 FORMAT (' Compressed data output'/ &
	1441	' Decimal precision: ',A/)
	1442	339 FORMAT (' No output during initial ',F8.2,' s')
	1443	340 FORMAT (/' Time series:')
	1444	341 FORMAT (' Output every ',F8.2,' s'/)
	1445	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1446	' Output every ',F8.2,' s ',A/ &
	1447	' Time averaged over ',F8.2,' s'/ &
	1448	' Averaging input every ',F8.2,' s'/ &
	1449	' Cross sections at ',A1,' = ',A/ &
	1450	' scalar-coordinates: ',A,' m'/)
	1451	343 FORMAT (/' Arrays: ',A/ &
	1452	' Output every ',F8.2,' s ',A/ &
	1453	' Time averaged over ',F8.2,' s'/ &
	1454	' Averaging input every ',F8.2,' s'/ &
	1455	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1456	345 FORMAT (' Output format: ',A/)
	1457	#if defined( __dvrp_graphics )
	1458	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1459	' Output every ',F7.1,' s'/ &
	1460	' Output mode: ',A/ &
	1461	' Host / User: ',A,' / ',A/ &
	1462	' Directory: ',A// &
	1463	' The sequence contains:')
	1464	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1465	362 FORMAT (' Sectional plane ',A)
	1466	363 FORMAT (' Particles')
	1467	#endif
	1468	#if defined( __spectra )
	1469	370 FORMAT (' Spectra:')
	1470	371 FORMAT (' Output every ',F7.1,' s'/)
	1471	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1472	' Directions: ', 10(A5,',')/ &
	1473	' height levels k = ', 9(I3,','),I3,'.'/ &
	1474	' height levels selected for standard plot:'/ &
	1475	' k = ', 9(I3,','),I3,'.'/ &
	1476	' Time averaged over ', F7.1, ' s,' / &
	1477	' Profiles for the time averaging are taken every ', &
	1478	F6.1,' s')
	1479	#endif
	1480	400 FORMAT (//' Physical quantities:'/ &
	1481	' -------------------'/)
	1482	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1483	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1484	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1485	' f* = ',F9.6,' 1/s')
	1486	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1487	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1488	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1489	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1490	' ------------------------'/)
[57]	1491	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1492	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1493	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1494	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1495	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1496	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1497	' Height: ',A,' m'/ &
	1498	' Temperature: ',A,' K'/ &
	1499	' Gradient: ',A,' K/100m'/ &
	1500	' Gridpoint: ',A)
	1501	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1502	' Height: ',A,' m'/ &
	1503	' Humidity: ',A,' kg/kg'/ &
	1504	' Gradient: ',A,' (kg/kg)/100m'/ &
	1505	' Gridpoint: ',A)
	1506	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1507	' Height: ',A,' m'/ &
	1508	' Scalar concentration: ',A,' kg/m**3'/ &
	1509	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1510	' Gridpoint: ',A)
	1511	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1512	' Height: ',A,' m'/ &
	1513	' ug: ',A,' m/s'/ &
	1514	' Gradient: ',A,' 1/100s'/ &
	1515	' Gridpoint: ',A)
	1516	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1517	' Height: ',A,' m'/ &
[97]	1518	' vg: ',A,' m/s'/ &
[1]	1519	' Gradient: ',A,' 1/100s'/ &
	1520	' Gridpoint: ',A)
[97]	1521	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1522	' Height: ',A,' m'/ &
	1523	' Salinity: ',A,' psu'/ &
	1524	' Gradient: ',A,' psu/100m'/ &
	1525	' Gridpoint: ',A)
[1]	1526	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1527	' ---------------------------'/)
	1528	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1529	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1530	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1531	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1532	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1533	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1534	470 FORMAT (//' Actions during the simulation:'/ &
	1535	' -----------------------------'/)
[94]	1536	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1537	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1538	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1539	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1540	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1541	' to i/j =',I4)
	1542	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1543	1X,F5.3, ' m2/s2')
	1544	474 FORMAT (' Random number generator used : ',A/)
	1545	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1546	'respectively, if'/ &
	1547	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1548	' 3D-simulation'/)
	1549	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1550	'respectively, if the'/ &
	1551	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1552	' the 3D-simulation'/)
	1553	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1554	'respectively, if the'/ &
	1555	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1556	' the 3D-simulation'/)
	1557	480 FORMAT (' Particles:'/ &
	1558	' ---------'// &
	1559	' Particle advection is active (switched on at t = ', F7.1, &
	1560	' s)'/ &
	1561	' Start of new particle generations every ',F6.1,' s'/ &
	1562	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1563	' bottom: ', A, ' top: ', A/&
	1564	' Maximum particle age: ',F9.1,' s'/ &
[117]	1565	' Advection stopped at t = ',F9.1,' s'/ &
	1566	' Particles are sorted every ',F9.1,' s'/)
[1]	1567	481 FORMAT (' Particles have random start positions'/)
	1568	482 FORMAT (' Particles are advected only horizontally'/)
	1569	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1570	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1571	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1572	' Maximum age of the end of the tail: ',F8.2,' s')
	1573	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1574	486 FORMAT (' Particle statistics are written on file'/)
	1575	487 FORMAT (' Number of particle groups: ',I2/)
	1576	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1577	' minimum timestep for advection: ', F7.5/)
	1578	489 FORMAT (' Number of particles simultaneously released at each ', &
	1579	'point: ', I5/)
	1580	490 FORMAT (' Particle group ',I2,':'/ &
	1581	' Particle radius: ',E10.3, 'm')
	1582	491 FORMAT (' Particle inertia is activated'/ &
	1583	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1584	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1585	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1586	' y:',F8.1,' - ',F8.1,' m'/&
	1587	' z:',F8.1,' - ',F8.1,' m'/&
	1588	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1589	' m dz = ',F8.1,' m'/)
	1590	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1591	F8.2,' s'/)
	1592	495 FORMAT (' Number of particles in total domain: ',I10/)
	1593	500 FORMAT (//' 1D-Model parameters:'/ &
	1594	' -------------------'// &
	1595	' Simulation time: ',F8.1,' s'/ &
	1596	' Run-controll output every: ',F8.1,' s'/ &
	1597	' Vertical profile output every: ',F8.1,' s'/ &
	1598	' Mixing length calculation: ',A/ &
	1599	' Dissipation calculation: ',A/)
	1600	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1601
	1602
	1603	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 141

Download in other formats: