Home

Context Navigation

header.f90 @ 130

Last change on this file since 130 was 130, checked in by letzel, 17 years ago

DVRP output modifications:

The user can now visualize user-defined quantities using dvrp.

data_output_dvrp calls the new user_interface subroutine
user_data_output_dvrp in case of unknown variables (CASE DEFAULT).

Two instead of one digit are allowed to specify isosurface and slicer

variables with the parameter mode_dvrp.

Property svn:keywords set to Id

File size: 59.0 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[130]	6	! allow two instead of one digit to specify isosurface and slicer variables
[117]	7	! Output of sorting frequency of particles
[1]	8	!
	9	! Former revisions:
	10	! -----------------
[3]	11	! $Id: header.f90 130 2007-11-13 14:08:40Z letzel $
[39]	12	!
[110]	13	! 108 2007-08-24 15:10:38Z letzel
	14	! Output of informations for coupled model runs (boundary conditions etc.)
	15	! + output of momentumfluxes at the top boundary
	16	! Rayleigh damping for ocean, e_init
	17	!
[98]	18	! 97 2007-06-21 08:23:15Z raasch
	19	! Adjustments for the ocean version.
	20	! use_pt_reference renamed use_reference
	21	!
[90]	22	! 87 2007-05-22 15:46:47Z raasch
	23	! Bugfix: output of use_upstream_for_tke
	24	!
[83]	25	! 82 2007-04-16 15:40:52Z raasch
	26	! Preprocessor strings for different linux clusters changed to "lc",
	27	! routine local_flush is used for buffer flushing
	28	!
[77]	29	! 76 2007-03-29 00:58:32Z raasch
	30	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	31	! output of the loop optimization method, moisture renamed humidity,
	32	! output of subversion revision number
	33	!
[39]	34	! 19 2007-02-23 04:53:48Z raasch
	35	! Output of scalar flux applied at top boundary
	36	!
[3]	37	! RCS Log replace by Id keyword, revision history cleaned up
	38	!
[1]	39	! Revision 1.63 2006/08/22 13:53:13 raasch
	40	! Output of dz_max
	41	!
	42	! Revision 1.1 1997/08/11 06:17:20 raasch
	43	! Initial revision
	44	!
	45	!
	46	! Description:
	47	! ------------
	48	! Writing a header with all important informations about the actual run.
	49	! This subroutine is called three times, two times at the beginning
	50	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	51	! end of the run, then writing additional information about CPU-usage on file
	52	! header.
	53	!------------------------------------------------------------------------------!
	54
	55	USE arrays_3d
	56	USE control_parameters
	57	USE cloud_parameters
	58	USE cpulog
	59	USE dvrp_variables
	60	USE grid_variables
	61	USE indices
	62	USE model_1d
	63	USE particle_attributes
	64	USE pegrid
	65	USE spectrum
	66
	67	IMPLICIT NONE
	68
	69	CHARACTER (LEN=1) :: prec
	70	CHARACTER (LEN=2) :: do2d_mode
	71	CHARACTER (LEN=5) :: section_chr
	72	CHARACTER (LEN=9) :: time_to_string
	73	CHARACTER (LEN=10) :: coor_chr, host_chr
	74	CHARACTER (LEN=16) :: begin_chr
[75]	75	CHARACTER (LEN=21) :: ver_rev
[1]	76	CHARACTER (LEN=40) :: output_format
	77	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	78	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
	79	run_classification, slices, temperatures, &
	80	ugcomponent, vgcomponent
	81	CHARACTER (LEN=85) :: roben, runten
	82
	83	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	84	REAL :: cpuseconds_per_simulated_second
	85
	86	!
	87	!-- Open the output file. At the end of the simulation, output is directed
	88	!-- to unit 19.
	89	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	90	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	91	io = 15 ! header output on file RUN_CONTROL
	92	ELSE
	93	io = 19 ! header output on file HEADER
	94	ENDIF
	95	CALL check_open( io )
	96
	97	!
	98	!-- At the end of the run, output file (HEADER) will be rewritten with
	99	!-- new informations
	100	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	101
	102	!
	103	!-- Determine kind of model run
	104	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	105	run_classification = '3D - restart run'
	106	ELSE
	107	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	108	run_classification = '3D - run without 1D - prerun'
	109	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	110	run_classification = '3D - run with 1D - prerun'
	111	ELSE
	112	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	113	ENDIF
	114	ENDIF
[97]	115	IF ( ocean ) THEN
	116	run_classification = 'ocean - ' // run_classification
	117	ELSE
	118	run_classification = 'atmosphere - ' // run_classification
	119	ENDIF
[1]	120
	121	!
	122	!-- Run-identification, date, time, host
	123	host_chr = host(1:10)
[75]	124	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	125	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
	126	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
	127	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	128	ADJUSTR( host_chr )
[1]	129	#if defined( __parallel )
	130	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	131	char1 = 'calculated'
	132	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	133	host(1:2) == 'lc' ) .AND. &
	134	npex == -1 .AND. pdims(2) == 1 ) THEN
	135	char1 = 'forced'
	136	ELSE
	137	char1 = 'predefined'
	138	ENDIF
	139	IF ( threads_per_task == 1 ) THEN
[102]	140	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	141	ELSE
[102]	142	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	143	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	144	ENDIF
	145	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	146	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	147	npex == -1 .AND. pdims(2) == 1 ) &
	148	THEN
[102]	149	WRITE ( io, 106 )
[1]	150	ELSEIF ( pdims(2) == 1 ) THEN
[102]	151	WRITE ( io, 107 ) 'x'
[1]	152	ELSEIF ( pdims(1) == 1 ) THEN
[102]	153	WRITE ( io, 107 ) 'y'
[1]	154	ENDIF
[102]	155	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	156	#endif
	157	WRITE ( io, 99 )
	158
	159	!
	160	!-- Numerical schemes
	161	WRITE ( io, 110 )
	162	IF ( psolver(1:7) == 'poisfft' ) THEN
	163	WRITE ( io, 111 ) TRIM( fft_method )
	164	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	165	ELSEIF ( psolver == 'sor' ) THEN
	166	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	167	ELSEIF ( psolver == 'multigrid' ) THEN
	168	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	169	IF ( mg_cycles == -1 ) THEN
	170	WRITE ( io, 140 ) residual_limit
	171	ELSE
	172	WRITE ( io, 141 ) mg_cycles
	173	ENDIF
	174	IF ( mg_switch_to_pe0_level == 0 ) THEN
	175	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	176	nzt_mg(1)
	177	ELSE
	178	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	179	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	180	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	181	nzt_mg(mg_switch_to_pe0_level), &
	182	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	183	nzt_mg(1)
	184	ENDIF
	185	ENDIF
	186	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	187	THEN
	188	WRITE ( io, 142 )
	189	ENDIF
	190
	191	IF ( momentum_advec == 'pw-scheme' ) THEN
	192	WRITE ( io, 113 )
	193	ELSE
	194	WRITE ( io, 114 )
	195	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	196	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	197	overshoot_limit_w /= 0.0 ) THEN
	198	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	199	overshoot_limit_w
	200	ENDIF
	201	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	202	ups_limit_w /= 0.0 ) &
	203	THEN
	204	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	205	ENDIF
	206	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	207	ENDIF
	208	IF ( scalar_advec == 'pw-scheme' ) THEN
	209	WRITE ( io, 116 )
	210	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	211	WRITE ( io, 117 )
	212	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	213	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	214	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	215	ENDIF
	216	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	217	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	218	ENDIF
	219	ELSE
	220	WRITE ( io, 118 )
	221	ENDIF
[63]	222
	223	WRITE ( io, 139 ) TRIM( loop_optimization )
	224
[1]	225	IF ( galilei_transformation ) THEN
	226	IF ( use_ug_for_galilei_tr ) THEN
	227	char1 = 'geostrophic wind'
	228	ELSE
	229	char1 = 'mean wind in model domain'
	230	ENDIF
	231	IF ( simulated_time_at_begin == simulated_time ) THEN
	232	char2 = 'at the start of the run'
	233	ELSE
	234	char2 = 'at the end of the run'
	235	ENDIF
	236	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	237	advected_distance_x/1000.0, advected_distance_y/1000.0
	238	ENDIF
	239	IF ( timestep_scheme == 'leapfrog' ) THEN
	240	WRITE ( io, 120 )
	241	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	242	WRITE ( io, 121 )
	243	ELSE
	244	WRITE ( io, 122 ) timestep_scheme
	245	ENDIF
[87]	246	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	247	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	248	IF ( .NOT. ocean ) THEN
	249	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	250	rayleigh_damping_factor
	251	ELSE
	252	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	253	rayleigh_damping_factor
	254	ENDIF
[1]	255	ENDIF
[75]	256	IF ( humidity ) THEN
[1]	257	IF ( .NOT. cloud_physics ) THEN
	258	WRITE ( io, 129 )
	259	ELSE
	260	WRITE ( io, 130 )
	261	WRITE ( io, 131 )
	262	IF ( radiation ) WRITE ( io, 132 )
	263	IF ( precipitation ) WRITE ( io, 133 )
	264	ENDIF
	265	ENDIF
	266	IF ( passive_scalar ) WRITE ( io, 134 )
	267	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	268	WRITE ( io, 99 )
	269
	270	!
	271	!-- Runtime and timestep informations
	272	WRITE ( io, 200 )
	273	IF ( .NOT. dt_fixed ) THEN
	274	WRITE ( io, 201 ) dt_max, cfl_factor
	275	ELSE
	276	WRITE ( io, 202 ) dt
	277	ENDIF
	278	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	279
	280	IF ( time_restart /= 9999999.9 .AND. &
	281	simulated_time_at_begin == simulated_time ) THEN
	282	IF ( dt_restart == 9999999.9 ) THEN
	283	WRITE ( io, 204 ) ' Restart at: ',time_restart
	284	ELSE
	285	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	286	ENDIF
	287	ENDIF
	288
	289	IF ( simulated_time_at_begin /= simulated_time ) THEN
	290	i = MAX ( log_point_s(10)%counts, 1 )
	291	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	292	cpuseconds_per_simulated_second = 0.0
	293	ELSE
	294	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	295	( simulated_time - &
	296	simulated_time_at_begin )
	297	ENDIF
	298	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	299	log_point_s(10)%sum / REAL( i ), &
	300	cpuseconds_per_simulated_second
	301	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	302	IF ( dt_restart == 9999999.9 ) THEN
	303	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	304	ELSE
	305	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	306	ENDIF
	307	ENDIF
	308	ENDIF
	309
	310	!
	311	!-- Computational grid
[94]	312	IF ( .NOT. ocean ) THEN
	313	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	314	IF ( dz_stretch_level_index < nzt+1 ) THEN
	315	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	316	dz_stretch_factor, dz_max
	317	ENDIF
	318	ELSE
	319	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	320	IF ( dz_stretch_level_index > 0 ) THEN
	321	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	322	dz_stretch_factor, dz_max
	323	ENDIF
[1]	324	ENDIF
	325	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	326	MIN( nnz+2, nzt+2 )
[76]	327	IF ( numprocs > 1 ) THEN
	328	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	329	WRITE ( io, 255 )
	330	ELSE
	331	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	332	ENDIF
[1]	333	ENDIF
	334	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	335
	336	!
	337	!-- Topography
	338	WRITE ( io, 270 ) topography
	339	SELECT CASE ( TRIM( topography ) )
	340
	341	CASE ( 'flat' )
	342	! no actions necessary
	343
	344	CASE ( 'single_building' )
	345	blx = INT( building_length_x / dx )
	346	bly = INT( building_length_y / dy )
	347	bh = INT( building_height / dz )
	348
	349	IF ( building_wall_left == 9999999.9 ) THEN
	350	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	351	ENDIF
	352	bxl = INT ( building_wall_left / dx + 0.5 )
	353	bxr = bxl + blx
	354
	355	IF ( building_wall_south == 9999999.9 ) THEN
	356	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	357	ENDIF
	358	bys = INT ( building_wall_south / dy + 0.5 )
	359	byn = bys + bly
	360
	361	WRITE ( io, 271 ) building_length_x, building_length_y, &
	362	building_height, bxl, bxr, bys, byn
	363
	364	END SELECT
	365
	366	!
	367	!-- Boundary conditions
	368	IF ( ibc_p_b == 0 ) THEN
	369	runten = 'p(0) = 0 \|'
	370	ELSEIF ( ibc_p_b == 1 ) THEN
	371	runten = 'p(0) = p(1) \|'
	372	ELSE
	373	runten = 'p(0) = p(1) +R\|'
	374	ENDIF
	375	IF ( ibc_p_t == 0 ) THEN
	376	roben = 'p(nzt+1) = 0 \|'
	377	ELSE
	378	roben = 'p(nzt+1) = p(nzt) \|'
	379	ENDIF
	380
	381	IF ( ibc_uv_b == 0 ) THEN
	382	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	383	ELSE
	384	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	385	ENDIF
	386	IF ( ibc_uv_t == 0 ) THEN
	387	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	388	ELSE
	389	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	390	ENDIF
	391
	392	IF ( ibc_pt_b == 0 ) THEN
	393	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	394	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	395	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	396	ELSEIF ( ibc_pt_b == 2 ) THEN
	397	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	398	ENDIF
	399	IF ( ibc_pt_t == 0 ) THEN
[19]	400	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	401	ELSEIF( ibc_pt_t == 1 ) THEN
	402	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	403	ELSEIF( ibc_pt_t == 2 ) THEN
	404	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	405	ENDIF
	406
	407	WRITE ( io, 300 ) runten, roben
	408
	409	IF ( .NOT. constant_diffusion ) THEN
	410	IF ( ibc_e_b == 1 ) THEN
	411	runten = 'e(0) = e(1)'
	412	ELSE
	413	runten = 'e(0) = e(1) = (u/0.1)*2'
	414	ENDIF
	415	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	416
[97]	417	WRITE ( io, 301 ) 'e', runten, roben
[1]	418
	419	ENDIF
	420
[97]	421	IF ( ocean ) THEN
	422	runten = 'sa(0) = sa(1)'
	423	IF ( ibc_sa_t == 0 ) THEN
	424	roben = 'sa(nzt+1) = sa_surface'
[1]	425	ELSE
[97]	426	roben = 'sa(nzt+1) = sa(nzt)'
[1]	427	ENDIF
[97]	428	WRITE ( io, 301 ) 'sa', runten, roben
	429	ENDIF
[1]	430
[97]	431	IF ( humidity ) THEN
	432	IF ( ibc_q_b == 0 ) THEN
	433	runten = 'q(0) = q_surface'
	434	ELSE
	435	runten = 'q(0) = q(1)'
	436	ENDIF
	437	IF ( ibc_q_t == 0 ) THEN
	438	roben = 'q(nzt) = q_top'
	439	ELSE
	440	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	441	ENDIF
	442	WRITE ( io, 301 ) 'q', runten, roben
	443	ENDIF
[1]	444
[97]	445	IF ( passive_scalar ) THEN
	446	IF ( ibc_q_b == 0 ) THEN
	447	runten = 's(0) = s_surface'
	448	ELSE
	449	runten = 's(0) = s(1)'
	450	ENDIF
	451	IF ( ibc_q_t == 0 ) THEN
	452	roben = 's(nzt) = s_top'
	453	ELSE
	454	roben = 's(nzt) = s(nzt-1) + ds/dz'
	455	ENDIF
	456	WRITE ( io, 301 ) 's', runten, roben
[1]	457	ENDIF
	458
	459	IF ( use_surface_fluxes ) THEN
	460	WRITE ( io, 303 )
	461	IF ( constant_heatflux ) THEN
	462	WRITE ( io, 306 ) surface_heatflux
	463	IF ( random_heatflux ) WRITE ( io, 307 )
	464	ENDIF
[75]	465	IF ( humidity .AND. constant_waterflux ) THEN
[1]	466	WRITE ( io, 311 ) surface_waterflux
	467	ENDIF
	468	IF ( passive_scalar .AND. constant_waterflux ) THEN
	469	WRITE ( io, 313 ) surface_waterflux
	470	ENDIF
	471	ENDIF
	472
[19]	473	IF ( use_top_fluxes ) THEN
	474	WRITE ( io, 304 )
[102]	475	IF ( coupling_mode == 'uncoupled' ) THEN
[103]	476	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
[102]	477	IF ( constant_top_heatflux ) THEN
	478	WRITE ( io, 306 ) top_heatflux
	479	ENDIF
	480	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	481	WRITE ( io, 316 )
[19]	482	ENDIF
[97]	483	IF ( ocean .AND. constant_top_salinityflux ) THEN
	484	WRITE ( io, 309 ) top_salinityflux
	485	ENDIF
[75]	486	IF ( humidity .OR. passive_scalar ) THEN
[19]	487	WRITE ( io, 315 )
	488	ENDIF
	489	ENDIF
	490
[1]	491	IF ( prandtl_layer ) THEN
[94]	492	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	493	rif_min, rif_max
[1]	494	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	495	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	496	WRITE ( io, 312 )
	497	ENDIF
	498	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	499	WRITE ( io, 314 )
	500	ENDIF
	501	ELSE
	502	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	503	WRITE ( io, 310 ) rif_min, rif_max
	504	ENDIF
	505	ENDIF
	506
	507	WRITE ( io, 317 ) bc_lr, bc_ns
	508	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	509	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	510	ENDIF
	511
	512	!
	513	!-- Listing of 1D-profiles
	514	WRITE ( io, 320 ) dt_dopr_listing
	515	IF ( averaging_interval_pr /= 0.0 ) THEN
	516	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	517	ENDIF
	518
	519	!
	520	!-- DATA output
	521	WRITE ( io, 330 )
	522	IF ( averaging_interval_pr /= 0.0 ) THEN
	523	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	524	ENDIF
	525
	526	!
	527	!-- 1D-profiles
	528	dopr_chr = 'Profile:'
	529	IF ( dopr_n /= 0 ) THEN
	530	WRITE ( io, 331 )
	531
	532	output_format = ''
	533	IF ( netcdf_output ) THEN
	534	IF ( netcdf_64bit ) THEN
	535	output_format = 'netcdf (64 bit offset)'
	536	ELSE
	537	output_format = 'netcdf'
	538	ENDIF
	539	ENDIF
	540	IF ( profil_output ) THEN
	541	IF ( netcdf_output ) THEN
	542	output_format = TRIM( output_format ) // ' and profil'
	543	ELSE
	544	output_format = 'profil'
	545	ENDIF
	546	ENDIF
	547	WRITE ( io, 345 ) output_format
	548
	549	DO i = 1, dopr_n
	550	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	551	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	552	WRITE ( io, 332 ) dopr_chr
	553	dopr_chr = ' :'
	554	ENDIF
	555	ENDDO
	556
	557	IF ( dopr_chr /= '' ) THEN
	558	WRITE ( io, 332 ) dopr_chr
	559	ENDIF
	560	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	561	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	562	ENDIF
	563
	564	!
	565	!-- 2D-arrays
	566	DO av = 0, 1
	567
	568	i = 1
	569	do2d_xy = ''
	570	do2d_xz = ''
	571	do2d_yz = ''
	572	DO WHILE ( do2d(av,i) /= ' ' )
	573
	574	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	575	do2d_mode = do2d(av,i)(l-1:l)
	576
	577	SELECT CASE ( do2d_mode )
	578	CASE ( 'xy' )
	579	ll = LEN_TRIM( do2d_xy )
	580	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	581	CASE ( 'xz' )
	582	ll = LEN_TRIM( do2d_xz )
	583	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	584	CASE ( 'yz' )
	585	ll = LEN_TRIM( do2d_yz )
	586	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	587	END SELECT
	588
	589	i = i + 1
	590
	591	ENDDO
	592
	593	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	594	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	595	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	596	( netcdf_output .OR. iso2d_output ) ) THEN
	597
	598	IF ( av == 0 ) THEN
	599	WRITE ( io, 334 ) ''
	600	ELSE
	601	WRITE ( io, 334 ) '(time-averaged)'
	602	ENDIF
	603
	604	IF ( do2d_at_begin ) THEN
	605	begin_chr = 'and at the start'
	606	ELSE
	607	begin_chr = ''
	608	ENDIF
	609
	610	output_format = ''
	611	IF ( netcdf_output ) THEN
	612	IF ( netcdf_64bit ) THEN
	613	output_format = 'netcdf (64 bit offset)'
	614	ELSE
	615	output_format = 'netcdf'
	616	ENDIF
	617	ENDIF
	618	IF ( iso2d_output ) THEN
	619	IF ( netcdf_output ) THEN
	620	output_format = TRIM( output_format ) // ' and iso2d'
	621	ELSE
	622	output_format = 'iso2d'
	623	ENDIF
	624	ENDIF
	625	WRITE ( io, 345 ) output_format
	626
	627	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	628	i = 1
	629	slices = '/'
	630	coordinates = '/'
	631	!
	632	!-- Building strings with index and coordinate informations of the
	633	!-- slices
	634	DO WHILE ( section(i,1) /= -9999 )
	635
	636	WRITE (section_chr,'(I5)') section(i,1)
	637	section_chr = ADJUSTL( section_chr )
	638	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	639
	640	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	641	coor_chr = ADJUSTL( coor_chr )
	642	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	643
	644	i = i + 1
	645	ENDDO
	646	IF ( av == 0 ) THEN
	647	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	648	TRIM( begin_chr ), 'k', TRIM( slices ), &
	649	TRIM( coordinates )
	650	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	651	WRITE ( io, 339 ) skip_time_do2d_xy
	652	ENDIF
	653	ELSE
	654	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	655	TRIM( begin_chr ), averaging_interval, &
	656	dt_averaging_input, 'k', TRIM( slices ), &
	657	TRIM( coordinates )
	658	IF ( skip_time_data_output_av /= 0.0 ) THEN
	659	WRITE ( io, 339 ) skip_time_data_output_av
	660	ENDIF
	661	ENDIF
	662
	663	ENDIF
	664
	665	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	666	i = 1
	667	slices = '/'
	668	coordinates = '/'
	669	!
	670	!-- Building strings with index and coordinate informations of the
	671	!-- slices
	672	DO WHILE ( section(i,2) /= -9999 )
	673
	674	WRITE (section_chr,'(I5)') section(i,2)
	675	section_chr = ADJUSTL( section_chr )
	676	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	677
	678	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	679	coor_chr = ADJUSTL( coor_chr )
	680	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	681
	682	i = i + 1
	683	ENDDO
	684	IF ( av == 0 ) THEN
	685	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	686	TRIM( begin_chr ), 'j', TRIM( slices ), &
	687	TRIM( coordinates )
	688	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	689	WRITE ( io, 339 ) skip_time_do2d_xz
	690	ENDIF
	691	ELSE
	692	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	693	TRIM( begin_chr ), averaging_interval, &
	694	dt_averaging_input, 'j', TRIM( slices ), &
	695	TRIM( coordinates )
	696	IF ( skip_time_data_output_av /= 0.0 ) THEN
	697	WRITE ( io, 339 ) skip_time_data_output_av
	698	ENDIF
	699	ENDIF
	700	ENDIF
	701
	702	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	703	i = 1
	704	slices = '/'
	705	coordinates = '/'
	706	!
	707	!-- Building strings with index and coordinate informations of the
	708	!-- slices
	709	DO WHILE ( section(i,3) /= -9999 )
	710
	711	WRITE (section_chr,'(I5)') section(i,3)
	712	section_chr = ADJUSTL( section_chr )
	713	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	714
	715	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	716	coor_chr = ADJUSTL( coor_chr )
	717	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	718
	719	i = i + 1
	720	ENDDO
	721	IF ( av == 0 ) THEN
	722	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	723	TRIM( begin_chr ), 'i', TRIM( slices ), &
	724	TRIM( coordinates )
	725	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	726	WRITE ( io, 339 ) skip_time_do2d_yz
	727	ENDIF
	728	ELSE
	729	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	730	TRIM( begin_chr ), averaging_interval, &
	731	dt_averaging_input, 'i', TRIM( slices ), &
	732	TRIM( coordinates )
	733	IF ( skip_time_data_output_av /= 0.0 ) THEN
	734	WRITE ( io, 339 ) skip_time_data_output_av
	735	ENDIF
	736	ENDIF
	737	ENDIF
	738
	739	ENDIF
	740
	741	ENDDO
	742
	743	!
	744	!-- 3d-arrays
	745	DO av = 0, 1
	746
	747	i = 1
	748	do3d_chr = ''
	749	DO WHILE ( do3d(av,i) /= ' ' )
	750
	751	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	752	i = i + 1
	753
	754	ENDDO
	755
	756	IF ( do3d_chr /= '' ) THEN
	757	IF ( av == 0 ) THEN
	758	WRITE ( io, 336 ) ''
	759	ELSE
	760	WRITE ( io, 336 ) '(time-averaged)'
	761	ENDIF
	762
	763	output_format = ''
	764	IF ( netcdf_output ) THEN
[46]	765	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	766	output_format = 'netcdf (64 bit offset)'
	767	ELSE
	768	output_format = 'netcdf'
	769	ENDIF
	770	ENDIF
	771	IF ( avs_output ) THEN
	772	IF ( netcdf_output ) THEN
	773	output_format = TRIM( output_format ) // ' and avs'
	774	ELSE
	775	output_format = 'avs'
	776	ENDIF
	777	ENDIF
	778	WRITE ( io, 345 ) output_format
	779
	780	IF ( do3d_at_begin ) THEN
	781	begin_chr = 'and at the start'
	782	ELSE
	783	begin_chr = ''
	784	ENDIF
	785	IF ( av == 0 ) THEN
	786	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	787	zu(nz_do3d), nz_do3d
	788	ELSE
	789	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	790	TRIM( begin_chr ), averaging_interval, &
	791	dt_averaging_input, zu(nz_do3d), nz_do3d
	792	ENDIF
	793
	794	IF ( do3d_compress ) THEN
	795	do3d_chr = ''
	796	i = 1
	797	DO WHILE ( do3d(av,i) /= ' ' )
	798
	799	SELECT CASE ( do3d(av,i) )
	800	CASE ( 'u' )
	801	j = 1
	802	CASE ( 'v' )
	803	j = 2
	804	CASE ( 'w' )
	805	j = 3
	806	CASE ( 'p' )
	807	j = 4
	808	CASE ( 'pt' )
	809	j = 5
	810	END SELECT
	811	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	812	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	813	':' // prec // ','
	814	i = i + 1
	815
	816	ENDDO
	817	WRITE ( io, 338 ) do3d_chr
	818
	819	ENDIF
	820
	821	IF ( av == 0 ) THEN
	822	IF ( skip_time_do3d /= 0.0 ) THEN
	823	WRITE ( io, 339 ) skip_time_do3d
	824	ENDIF
	825	ELSE
	826	IF ( skip_time_data_output_av /= 0.0 ) THEN
	827	WRITE ( io, 339 ) skip_time_data_output_av
	828	ENDIF
	829	ENDIF
	830
	831	ENDIF
	832
	833	ENDDO
	834
	835	!
	836	!-- Timeseries
	837	IF ( dt_dots /= 9999999.9 ) THEN
	838	WRITE ( io, 340 )
	839
	840	output_format = ''
	841	IF ( netcdf_output ) THEN
	842	IF ( netcdf_64bit ) THEN
	843	output_format = 'netcdf (64 bit offset)'
	844	ELSE
	845	output_format = 'netcdf'
	846	ENDIF
	847	ENDIF
	848	IF ( profil_output ) THEN
	849	IF ( netcdf_output ) THEN
	850	output_format = TRIM( output_format ) // ' and profil'
	851	ELSE
	852	output_format = 'profil'
	853	ENDIF
	854	ENDIF
	855	WRITE ( io, 345 ) output_format
	856	WRITE ( io, 341 ) dt_dots
	857	ENDIF
	858
	859	#if defined( __dvrp_graphics )
	860	!
	861	!-- Dvrp-output
	862	IF ( dt_dvrp /= 9999999.9 ) THEN
	863	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	864	TRIM( dvrp_username ), TRIM( dvrp_directory )
	865	i = 1
	866	l = 0
	867	DO WHILE ( mode_dvrp(i) /= ' ' )
	868	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	869	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	870	l = l + 1
	871	IF ( do3d(0,j) /= ' ' ) THEN
	872	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	873	ENDIF
	874	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	875	READ ( mode_dvrp(i), '(6X,I2)' ) j
[1]	876	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	877	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	878	WRITE ( io, 363 )
	879	ENDIF
	880	i = i + 1
	881	ENDDO
	882	ENDIF
	883	#endif
	884
	885	#if defined( __spectra )
	886	!
	887	!-- Spectra output
	888	IF ( dt_dosp /= 9999999.9 ) THEN
	889	WRITE ( io, 370 )
	890
	891	output_format = ''
	892	IF ( netcdf_output ) THEN
	893	IF ( netcdf_64bit ) THEN
	894	output_format = 'netcdf (64 bit offset)'
	895	ELSE
	896	output_format = 'netcdf'
	897	ENDIF
	898	ENDIF
	899	IF ( profil_output ) THEN
	900	IF ( netcdf_output ) THEN
	901	output_format = TRIM( output_format ) // ' and profil'
	902	ELSE
	903	output_format = 'profil'
	904	ENDIF
	905	ENDIF
	906	WRITE ( io, 345 ) output_format
	907	WRITE ( io, 371 ) dt_dosp
	908	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	909	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	910	( spectra_direction(i), i = 1,10 ), &
	911	( comp_spectra_level(i), i = 1,10 ), &
	912	( plot_spectra_level(i), i = 1,10 ), &
	913	averaging_interval_sp, dt_averaging_input_pr
	914	ENDIF
	915	#endif
	916
	917	WRITE ( io, 99 )
	918
	919	!
	920	!-- Physical quantities
	921	WRITE ( io, 400 )
	922
	923	!
	924	!-- Geostrophic parameters
	925	WRITE ( io, 410 ) omega, phi, f, fs
	926
	927	!
	928	!-- Other quantities
	929	WRITE ( io, 411 ) g
[97]	930	IF ( use_reference ) THEN
	931	IF ( ocean ) THEN
	932	WRITE ( io, 412 ) prho_reference
	933	ELSE
	934	WRITE ( io, 413 ) pt_reference
	935	ENDIF
	936	ENDIF
[1]	937
	938	!
	939	!-- Cloud physics parameters
	940	IF ( cloud_physics ) THEN
[57]	941	WRITE ( io, 415 )
	942	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	943	ENDIF
	944
	945	!-- Profile of the geostrophic wind (component ug)
	946	!-- Building output strings
	947	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	948	gradients = '------'
	949	slices = ' 0'
	950	coordinates = ' 0.0'
	951	i = 1
	952	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	953
	954	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	955	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	956
	957	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	958	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	959
	960	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	961	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	962
	963	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	964	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	965
	966	i = i + 1
	967	ENDDO
	968
	969	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	970	TRIM( gradients ), TRIM( slices )
	971
	972	!-- Profile of the geostrophic wind (component vg)
	973	!-- Building output strings
	974	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	975	gradients = '------'
	976	slices = ' 0'
	977	coordinates = ' 0.0'
	978	i = 1
	979	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	980
	981	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	982	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	983
	984	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	985	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	986
	987	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	988	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	989
	990	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	991	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	992
	993	i = i + 1
	994	ENDDO
	995
	996	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	997	TRIM( gradients ), TRIM( slices )
	998
	999	!
	1000	!-- Initial temperature profile
	1001	!-- Building output strings, starting with surface temperature
	1002	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1003	gradients = '------'
	1004	slices = ' 0'
	1005	coordinates = ' 0.0'
	1006	i = 1
	1007	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1008
[94]	1009	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1010	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1011
[94]	1012	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1013	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1014
[94]	1015	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1016	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1017
[94]	1018	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1019	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1020
	1021	i = i + 1
	1022	ENDDO
	1023
	1024	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1025	TRIM( gradients ), TRIM( slices )
	1026
	1027	!
	1028	!-- Initial humidity profile
	1029	!-- Building output strings, starting with surface humidity
[75]	1030	IF ( humidity .OR. passive_scalar ) THEN
[1]	1031	WRITE ( temperatures, '(E8.1)' ) q_surface
	1032	gradients = '--------'
	1033	slices = ' 0'
	1034	coordinates = ' 0.0'
	1035	i = 1
	1036	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1037
	1038	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1039	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1040
	1041	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1042	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1043
	1044	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1045	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1046
	1047	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1048	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1049
	1050	i = i + 1
	1051	ENDDO
	1052
[75]	1053	IF ( humidity ) THEN
[1]	1054	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1055	TRIM( gradients ), TRIM( slices )
	1056	ELSE
	1057	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1058	TRIM( gradients ), TRIM( slices )
	1059	ENDIF
	1060	ENDIF
	1061
	1062	!
[97]	1063	!-- Initial salinity profile
	1064	!-- Building output strings, starting with surface salinity
	1065	IF ( ocean ) THEN
	1066	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1067	gradients = '------'
	1068	slices = ' 0'
	1069	coordinates = ' 0.0'
	1070	i = 1
	1071	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1072
	1073	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1074	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1075
	1076	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1077	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1078
	1079	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1080	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1081
	1082	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1083	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1084
	1085	i = i + 1
	1086	ENDDO
	1087
	1088	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1089	TRIM( gradients ), TRIM( slices )
	1090	ENDIF
	1091
	1092	!
[1]	1093	!-- LES / turbulence parameters
	1094	WRITE ( io, 450 )
	1095
	1096	!--
	1097	! ... LES-constants used must still be added here
	1098	!--
	1099	IF ( constant_diffusion ) THEN
	1100	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1101	prandtl_number
	1102	ENDIF
	1103	IF ( .NOT. constant_diffusion) THEN
[108]	1104	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1105	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1106	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1107	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1108	ENDIF
	1109
	1110	!
	1111	!-- Special actions during the run
	1112	WRITE ( io, 470 )
	1113	IF ( create_disturbances ) THEN
	1114	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1115	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1116	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1117	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1118	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1119	ELSE
	1120	WRITE ( io, 473 ) disturbance_energy_limit
	1121	ENDIF
	1122	WRITE ( io, 474 ) TRIM( random_generator )
	1123	ENDIF
	1124	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1125	WRITE ( io, 475 ) pt_surface_initial_change
	1126	ENDIF
[75]	1127	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1128	WRITE ( io, 476 ) q_surface_initial_change
	1129	ENDIF
	1130	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1131	WRITE ( io, 477 ) q_surface_initial_change
	1132	ENDIF
	1133
[60]	1134	IF ( particle_advection ) THEN
[1]	1135	!
[60]	1136	!-- Particle attributes
	1137	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1138	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1139	end_time_prel, dt_sort_particles
[60]	1140	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1141	IF ( random_start_position ) WRITE ( io, 481 )
	1142	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1143	WRITE ( io, 495 ) total_number_of_particles
	1144	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1145	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1146	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1147	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1148	WRITE ( io, 484 ) total_number_of_tails, &
	1149	minimum_tailpoint_distance, &
	1150	maximum_tailpoint_age
	1151	ENDIF
[1]	1152	ENDIF
[60]	1153	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1154	WRITE ( io, 485 ) dt_write_particle_data
	1155	output_format = ''
	1156	IF ( netcdf_output ) THEN
	1157	IF ( netcdf_64bit ) THEN
	1158	output_format = 'netcdf (64 bit offset) and binary'
	1159	ELSE
	1160	output_format = 'netcdf and binary'
	1161	ENDIF
[1]	1162	ELSE
[60]	1163	output_format = 'binary'
[1]	1164	ENDIF
[60]	1165	WRITE ( io, 345 ) output_format
[1]	1166	ENDIF
[60]	1167	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1168	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1169
[60]	1170	WRITE ( io, 487 ) number_of_particle_groups
[1]	1171
[60]	1172	DO i = 1, number_of_particle_groups
	1173	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1174	WRITE ( io, 490 ) i, 0.0
	1175	WRITE ( io, 492 )
[1]	1176	ELSE
[60]	1177	WRITE ( io, 490 ) i, radius(i)
	1178	IF ( density_ratio(i) /= 0.0 ) THEN
	1179	WRITE ( io, 491 ) density_ratio(i)
	1180	ELSE
	1181	WRITE ( io, 492 )
	1182	ENDIF
[1]	1183	ENDIF
[60]	1184	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1185	pdx(i), pdy(i), pdz(i)
	1186	ENDDO
[1]	1187
[60]	1188	ENDIF
[1]	1189
[60]	1190
[1]	1191	!
	1192	!-- Parameters of 1D-model
	1193	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1194	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1195	mixing_length_1d, dissipation_1d
	1196	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1197	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1198	ENDIF
	1199	ENDIF
	1200
	1201	!
	1202	!-- User-defined informations
	1203	CALL user_header( io )
	1204
	1205	WRITE ( io, 99 )
	1206
	1207	!
	1208	!-- Write buffer contents to disc immediately
[82]	1209	CALL local_flush( io )
[1]	1210
	1211	!
	1212	!-- Here the FORMATs start
	1213
	1214	99 FORMAT (1X,78('-'))
[97]	1215	100 FORMAT (/1X,'*************************',11X,42('-')/ &
[75]	1216	1X,'* ',A,' *',11X,A/ &
[102]	1217	1X,'*************************',11X,42('-'))
	1218	101 FORMAT (37X,'coupled run: ',A/ &
	1219	37X,42('-'))
	1220	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
[1]	1221	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1222	' Run on host: ',A10)
	1223	#if defined( __parallel )
[102]	1224	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1225	')',1X,A)
[102]	1226	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1227	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1228	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1229	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1230	37X,'because the job is running on an SMP-cluster')
[102]	1231	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1232	#endif
	1233	110 FORMAT (/' Numerical Schemes:'/ &
	1234	' -----------------'/)
	1235	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1236	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1237	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1238	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1239	' or Upstream')
	1240	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1241	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1242	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1243	' or Upstream')
	1244	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1245	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1246	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1247	' Translation velocity = ',A/ &
	1248	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1249	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1250	' of timestep changes)')
	1251	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1252	' timestep changes')
	1253	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1254	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1255	' maximum damping coefficient: ',F5.3, ' 1/s')
	1256	124 FORMAT (' Spline-overshoots are being suppressed')
	1257	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1258	' of'/ &
	1259	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1260	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1261	' of'/ &
	1262	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1263	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1264	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1265	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1266	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1267	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1268	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1269	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1270	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1271	' effective emissivity scheme')
	1272	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1273	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1274	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1275	A,'-cycle)'/ &
	1276	' number of grid levels: ',I2/ &
	1277	' Gauss-Seidel red/black iterations: ',I2)
	1278	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1279	I3,')')
	1280	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1281	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1282	I3,')'/ &
	1283	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1284	I3,')')
	1285	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1286	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1287	140 FORMAT (' maximum residual allowed: ',E10.3)
	1288	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1289	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1290	'step')
[87]	1291	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1292	'kinetic energy')
[1]	1293	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1294	'conserved')
	1295	200 FORMAT (//' Run time and time step information:'/ &
	1296	' ----------------------------------'/)
	1297	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1298	' CFL-factor: ',F4.2)
	1299	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1300	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1301	' End time: ',F9.3,' s')
	1302	204 FORMAT ( A,F9.3,' s')
	1303	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1304	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1305	' CPU-time used: ',F9.3,' s per timestep: ', &
	1306	' ',F9.3,' s'/ &
	1307	' per second of simulated tim', &
	1308	'e: ',F9.3,' s')
	1309	250 FORMAT (//' Computational grid and domain size:'/ &
	1310	' ----------------------------------'// &
	1311	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1312	' m dz = ',F7.3,' m'/ &
	1313	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1314	' m z(u) = ',F10.3,' m'/)
	1315	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1316	' factor: ',F5.3/ &
	1317	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1318	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1319	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1320	255 FORMAT (' Subdomains have equal size')
	1321	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1322	'have smaller sizes'/ &
	1323	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1324	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1325	' degrees')
	1326	270 FORMAT (//' Topography informations:'/ &
	1327	' -----------------------'// &
	1328	1X,'Topography: ',A)
	1329	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1330	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1331	' / ',I4)
	1332	300 FORMAT (//' Boundary conditions:'/ &
	1333	' -------------------'// &
	1334	' p uv ', &
	1335	' pt'// &
	1336	' B. bound.: ',A/ &
	1337	' T. bound.: ',A)
[97]	1338	301 FORMAT (/' ',A// &
[1]	1339	' B. bound.: ',A/ &
	1340	' T. bound.: ',A)
[19]	1341	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1342	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1343	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1344	'computational u,v-level:'// &
[1]	1345	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1346	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1347	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1348	307 FORMAT (' Heatflux has a random normal distribution')
	1349	308 FORMAT (' Predefined surface temperature')
[97]	1350	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1351	310 FORMAT (//' 1D-Model:'// &
	1352	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1353	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1354	312 FORMAT (' Predefined surface humidity')
	1355	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1356	314 FORMAT (' Predefined scalar value at the surface')
[19]	1357	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1358	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1359	'atmosphere model')
[1]	1360	317 FORMAT (//' Lateral boundaries:'/ &
	1361	' left/right: ',A/ &
	1362	' north/south: ',A)
	1363	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1364	'max =',F5.1,' m**2/s')
[103]	1365	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
	1366	' v: ',F9.6,' m2/s2')
[1]	1367	320 FORMAT (//' List output:'/ &
	1368	' -----------'// &
	1369	' 1D-Profiles:'/ &
	1370	' Output every ',F8.2,' s')
	1371	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1372	' Averaging input every ',F8.2,' s')
	1373	330 FORMAT (//' Data output:'/ &
	1374	' -----------'/)
	1375	331 FORMAT (/' 1D-Profiles:')
	1376	332 FORMAT (/' ',A)
	1377	333 FORMAT (' Output every ',F8.2,' s',/ &
	1378	' Time averaged over ',F8.2,' s'/ &
	1379	' Averaging input every ',F8.2,' s')
	1380	334 FORMAT (/' 2D-Arrays',A,':')
	1381	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1382	' Output every ',F8.2,' s ',A/ &
	1383	' Cross sections at ',A1,' = ',A/ &
	1384	' scalar-coordinates: ',A,' m'/)
	1385	336 FORMAT (/' 3D-Arrays',A,':')
	1386	337 FORMAT (/' Arrays: ',A/ &
	1387	' Output every ',F8.2,' s ',A/ &
	1388	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1389	338 FORMAT (' Compressed data output'/ &
	1390	' Decimal precision: ',A/)
	1391	339 FORMAT (' No output during initial ',F8.2,' s')
	1392	340 FORMAT (/' Time series:')
	1393	341 FORMAT (' Output every ',F8.2,' s'/)
	1394	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1395	' Output every ',F8.2,' s ',A/ &
	1396	' Time averaged over ',F8.2,' s'/ &
	1397	' Averaging input every ',F8.2,' s'/ &
	1398	' Cross sections at ',A1,' = ',A/ &
	1399	' scalar-coordinates: ',A,' m'/)
	1400	343 FORMAT (/' Arrays: ',A/ &
	1401	' Output every ',F8.2,' s ',A/ &
	1402	' Time averaged over ',F8.2,' s'/ &
	1403	' Averaging input every ',F8.2,' s'/ &
	1404	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1405	345 FORMAT (' Output format: ',A/)
	1406	#if defined( __dvrp_graphics )
	1407	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1408	' Output every ',F7.1,' s'/ &
	1409	' Output mode: ',A/ &
	1410	' Host / User: ',A,' / ',A/ &
	1411	' Directory: ',A// &
	1412	' The sequence contains:')
	1413	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1414	362 FORMAT (' Sectional plane ',A)
	1415	363 FORMAT (' Particles')
	1416	#endif
	1417	#if defined( __spectra )
	1418	370 FORMAT (' Spectra:')
	1419	371 FORMAT (' Output every ',F7.1,' s'/)
	1420	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1421	' Directions: ', 10(A5,',')/ &
	1422	' height levels k = ', 9(I3,','),I3,'.'/ &
	1423	' height levels selected for standard plot:'/ &
	1424	' k = ', 9(I3,','),I3,'.'/ &
	1425	' Time averaged over ', F7.1, ' s,' / &
	1426	' Profiles for the time averaging are taken every ', &
	1427	F6.1,' s')
	1428	#endif
	1429	400 FORMAT (//' Physical quantities:'/ &
	1430	' -------------------'/)
	1431	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1432	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1433	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1434	' f* = ',F9.6,' 1/s')
	1435	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1436	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1437	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1438	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1439	' ------------------------'/)
[57]	1440	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1441	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1442	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1443	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1444	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1445	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1446	' Height: ',A,' m'/ &
	1447	' Temperature: ',A,' K'/ &
	1448	' Gradient: ',A,' K/100m'/ &
	1449	' Gridpoint: ',A)
	1450	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1451	' Height: ',A,' m'/ &
	1452	' Humidity: ',A,' kg/kg'/ &
	1453	' Gradient: ',A,' (kg/kg)/100m'/ &
	1454	' Gridpoint: ',A)
	1455	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1456	' Height: ',A,' m'/ &
	1457	' Scalar concentration: ',A,' kg/m**3'/ &
	1458	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1459	' Gridpoint: ',A)
	1460	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1461	' Height: ',A,' m'/ &
	1462	' ug: ',A,' m/s'/ &
	1463	' Gradient: ',A,' 1/100s'/ &
	1464	' Gridpoint: ',A)
	1465	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1466	' Height: ',A,' m'/ &
[97]	1467	' vg: ',A,' m/s'/ &
[1]	1468	' Gradient: ',A,' 1/100s'/ &
	1469	' Gridpoint: ',A)
[97]	1470	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1471	' Height: ',A,' m'/ &
	1472	' Salinity: ',A,' psu'/ &
	1473	' Gradient: ',A,' psu/100m'/ &
	1474	' Gridpoint: ',A)
[1]	1475	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1476	' ---------------------------'/)
	1477	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1478	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1479	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1480	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1481	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1482	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1483	470 FORMAT (//' Actions during the simulation:'/ &
	1484	' -----------------------------'/)
[94]	1485	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1486	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1487	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1488	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1489	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1490	' to i/j =',I4)
	1491	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1492	1X,F5.3, ' m2/s2')
	1493	474 FORMAT (' Random number generator used : ',A/)
	1494	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1495	'respectively, if'/ &
	1496	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1497	' 3D-simulation'/)
	1498	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1499	'respectively, if the'/ &
	1500	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1501	' the 3D-simulation'/)
	1502	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1503	'respectively, if the'/ &
	1504	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1505	' the 3D-simulation'/)
	1506	480 FORMAT (' Particles:'/ &
	1507	' ---------'// &
	1508	' Particle advection is active (switched on at t = ', F7.1, &
	1509	' s)'/ &
	1510	' Start of new particle generations every ',F6.1,' s'/ &
	1511	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1512	' bottom: ', A, ' top: ', A/&
	1513	' Maximum particle age: ',F9.1,' s'/ &
[117]	1514	' Advection stopped at t = ',F9.1,' s'/ &
	1515	' Particles are sorted every ',F9.1,' s'/)
[1]	1516	481 FORMAT (' Particles have random start positions'/)
	1517	482 FORMAT (' Particles are advected only horizontally'/)
	1518	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1519	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1520	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1521	' Maximum age of the end of the tail: ',F8.2,' s')
	1522	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1523	486 FORMAT (' Particle statistics are written on file'/)
	1524	487 FORMAT (' Number of particle groups: ',I2/)
	1525	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1526	' minimum timestep for advection: ', F7.5/)
	1527	489 FORMAT (' Number of particles simultaneously released at each ', &
	1528	'point: ', I5/)
	1529	490 FORMAT (' Particle group ',I2,':'/ &
	1530	' Particle radius: ',E10.3, 'm')
	1531	491 FORMAT (' Particle inertia is activated'/ &
	1532	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1533	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1534	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1535	' y:',F8.1,' - ',F8.1,' m'/&
	1536	' z:',F8.1,' - ',F8.1,' m'/&
	1537	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1538	' m dz = ',F8.1,' m'/)
	1539	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1540	F8.2,' s'/)
	1541	495 FORMAT (' Number of particles in total domain: ',I10/)
	1542	500 FORMAT (//' 1D-Model parameters:'/ &
	1543	' -------------------'// &
	1544	' Simulation time: ',F8.1,' s'/ &
	1545	' Run-controll output every: ',F8.1,' s'/ &
	1546	' Vertical profile output every: ',F8.1,' s'/ &
	1547	' Mixing length calculation: ',A/ &
	1548	' Dissipation calculation: ',A/)
	1549	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1550
	1551
	1552	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 130

Download in other formats: