Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1118

Last change on this file since 1118 was 1116, checked in by hoffmann, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 78.2 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[941]	22	!
[1116]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1116 2013-03-26 18:49:55Z suehring $
	27	!
[1116]	28	! 1115 2013-03-26 18:16:16Z hoffmann
	29	! descriptions for Seifert-Beheng-cloud-physics-scheme added
	30	!
[1112]	31	! 1111 2013-03-08 23:54:10Z raasch
	32	! output of accelerator board information
	33	! ibc_p_b = 2 removed
	34	!
[1109]	35	! 1108 2013-03-05 07:03:32Z raasch
	36	! bugfix for r1106
	37	!
[1107]	38	! 1106 2013-03-04 05:31:38Z raasch
	39	! some format changes for coupled runs
	40	!
[1093]	41	! 1092 2013-02-02 11:24:22Z raasch
	42	! unused variables removed
	43	!
[1037]	44	! 1036 2012-10-22 13:43:42Z raasch
	45	! code put under GPL (PALM 3.9)
	46	!
[1035]	47	! 1031 2012-10-19 14:35:30Z raasch
	48	! output of netCDF data format modified
	49	!
[1017]	50	! 1015 2012-09-27 09:23:24Z raasch
	51	! output of Aajustment of mixing length to the Prandtl mixing length at first
	52	! grid point above ground removed
	53	!
[1004]	54	! 1003 2012-09-14 14:35:53Z raasch
	55	! output of information about equal/unequal subdomain size removed
	56	!
[1002]	57	! 1001 2012-09-13 14:08:46Z raasch
	58	! all actions concerning leapfrog- and upstream-spline-scheme removed
	59	!
[979]	60	! 978 2012-08-09 08:28:32Z fricke
	61	! -km_damp_max, outflow_damping_width
	62	! +pt_damping_factor, pt_damping_width
	63	! +z0h
	64	!
[965]	65	! 964 2012-07-26 09:14:24Z raasch
	66	! output of profil-related quantities removed
	67	!
[941]	68	! 940 2012-07-09 14:31:00Z raasch
	69	! Output in case of simulations for pure neutral stratification (no pt-equation
	70	! solved)
	71	!
[928]	72	! 927 2012-06-06 19:15:04Z raasch
	73	! output of masking_method for mg-solver
	74	!
[869]	75	! 868 2012-03-28 12:21:07Z raasch
	76	! translation velocity in Galilean transformation changed to 0.6 * ug
	77	!
[834]	78	! 833 2012-02-22 08:55:55Z maronga
	79	! Adjusted format for leaf area density
	80	!
[829]	81	! 828 2012-02-21 12:00:36Z raasch
	82	! output of dissipation_classes + radius_classes
	83	!
[826]	84	! 825 2012-02-19 03:03:44Z raasch
	85	! Output of cloud physics parameters/quantities complemented and restructured
	86	!
[768]	87	! 767 2011-10-14 06:39:12Z raasch
	88	! Output of given initial u,v-profiles
	89	!
[760]	90	! 759 2011-09-15 13:58:31Z raasch
	91	! output of maximum number of parallel io streams
	92	!
[708]	93	! 707 2011-03-29 11:39:40Z raasch
	94	! bc_lr/ns replaced by bc_lr/ns_cyc
	95	!
[668]	96	! 667 2010-12-23 12:06:00Z suehring/gryschka
	97	! Output of advection scheme.
	98	! Modified output of Prandtl-layer height.
	99	!
[581]	100	! 580 2010-10-05 13:59:11Z heinze
	101	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	102	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	103	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	104	!
[494]	105	! 493 2010-03-01 08:30:24Z raasch
	106	! NetCDF data output format extendend for NetCDF4/HDF5
	107	!
[482]	108	! 449 2010-02-02 11:23:59Z raasch
	109	! +large scale vertical motion (subsidence/ascent)
	110	! Bugfix: index problem concerning gradient_level indices removed
	111	!
[449]	112	! 410 2009-12-04 17:05:40Z letzel
	113	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	114	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	115	!
[392]	116	! 346 2009-07-06 10:13:41Z raasch
[328]	117	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	118	! Coupling with independent precursor runs.
[254]	119	! Output of messages replaced by message handling routine.
[336]	120	! Output of several additional dvr parameters
[240]	121	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	122	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	123	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	124	! topography_grid_convention moved from user_header
[292]	125	! small bugfix concerning 3d 64bit netcdf output format
[1]	126	!
[226]	127	! 206 2008-10-13 14:59:11Z raasch
	128	! Bugfix: error in zu index in case of section_xy = -1
	129	!
[200]	130	! 198 2008-09-17 08:55:28Z raasch
	131	! Format adjustments allowing output of larger revision numbers
	132	!
[198]	133	! 197 2008-09-16 15:29:03Z raasch
	134	! allow 100 spectra levels instead of 10 for consistency with
	135	! define_netcdf_header,
	136	! bugfix in the output of the characteristic levels of potential temperature,
	137	! geostrophic wind, scalar concentration, humidity and leaf area density,
	138	! output of turbulence recycling informations
	139	!
[139]	140	! 138 2007-11-28 10:03:58Z letzel
	141	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	142	! Allow two instead of one digit to specify isosurface and slicer variables.
	143	! Output of sorting frequency of particles
	144	!
[110]	145	! 108 2007-08-24 15:10:38Z letzel
	146	! Output of informations for coupled model runs (boundary conditions etc.)
	147	! + output of momentumfluxes at the top boundary
	148	! Rayleigh damping for ocean, e_init
	149	!
[98]	150	! 97 2007-06-21 08:23:15Z raasch
	151	! Adjustments for the ocean version.
	152	! use_pt_reference renamed use_reference
	153	!
[90]	154	! 87 2007-05-22 15:46:47Z raasch
	155	! Bugfix: output of use_upstream_for_tke
	156	!
[83]	157	! 82 2007-04-16 15:40:52Z raasch
	158	! Preprocessor strings for different linux clusters changed to "lc",
	159	! routine local_flush is used for buffer flushing
	160	!
[77]	161	! 76 2007-03-29 00:58:32Z raasch
	162	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	163	! output of the loop optimization method, moisture renamed humidity,
	164	! output of subversion revision number
	165	!
[39]	166	! 19 2007-02-23 04:53:48Z raasch
	167	! Output of scalar flux applied at top boundary
	168	!
[3]	169	! RCS Log replace by Id keyword, revision history cleaned up
	170	!
[1]	171	! Revision 1.63 2006/08/22 13:53:13 raasch
	172	! Output of dz_max
	173	!
	174	! Revision 1.1 1997/08/11 06:17:20 raasch
	175	! Initial revision
	176	!
	177	!
	178	! Description:
	179	! ------------
	180	! Writing a header with all important informations about the actual run.
	181	! This subroutine is called three times, two times at the beginning
	182	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	183	! end of the run, then writing additional information about CPU-usage on file
	184	! header.
[411]	185	!-----------------------------------------------------------------------------!
[1]	186
	187	USE arrays_3d
	188	USE control_parameters
	189	USE cloud_parameters
	190	USE cpulog
	191	USE dvrp_variables
	192	USE grid_variables
	193	USE indices
	194	USE model_1d
	195	USE particle_attributes
	196	USE pegrid
[411]	197	USE subsidence_mod
[1]	198	USE spectrum
	199
	200	IMPLICIT NONE
	201
	202	CHARACTER (LEN=1) :: prec
	203	CHARACTER (LEN=2) :: do2d_mode
	204	CHARACTER (LEN=5) :: section_chr
	205	CHARACTER (LEN=10) :: coor_chr, host_chr
	206	CHARACTER (LEN=16) :: begin_chr
[1106]	207	CHARACTER (LEN=26) :: ver_rev
[1]	208	CHARACTER (LEN=40) :: output_format
[167]	209	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	210	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	211	domask_chr, run_classification
[167]	212	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	213	temperatures, ugcomponent, vgcomponent
[1]	214	CHARACTER (LEN=85) :: roben, runten
	215
[410]	216	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	217
	218	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	219	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	220	REAL :: cpuseconds_per_simulated_second
	221
	222	!
	223	!-- Open the output file. At the end of the simulation, output is directed
	224	!-- to unit 19.
	225	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	226	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	227	io = 15 ! header output on file RUN_CONTROL
	228	ELSE
	229	io = 19 ! header output on file HEADER
	230	ENDIF
	231	CALL check_open( io )
	232
	233	!
	234	!-- At the end of the run, output file (HEADER) will be rewritten with
	235	!-- new informations
	236	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	237
	238	!
	239	!-- Determine kind of model run
	240	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	241	run_classification = '3D - restart run'
[328]	242	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	243	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	244	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	245	run_classification = '3D - run without 1D - prerun'
[197]	246	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	247	run_classification = '3D - run with 1D - prerun'
[197]	248	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	249	run_classification = '3D - run initialized by user'
[1]	250	ELSE
[254]	251	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	252	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	253	ENDIF
[97]	254	IF ( ocean ) THEN
	255	run_classification = 'ocean - ' // run_classification
	256	ELSE
	257	run_classification = 'atmosphere - ' // run_classification
	258	ENDIF
[1]	259
	260	!
	261	!-- Run-identification, date, time, host
	262	host_chr = host(1:10)
[75]	263	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	264	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	265	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	266	#if defined( __mpi2 )
	267	mpi_type = 2
	268	#else
	269	mpi_type = 1
	270	#endif
	271	WRITE ( io, 101 ) mpi_type, coupling_mode
	272	ENDIF
[1108]	273	#if defined( __parallel )
[1106]	274	IF ( coupling_start_time /= 0.0 ) THEN
	275	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	276	WRITE ( io, 109 )
	277	ELSE
	278	WRITE ( io, 114 )
	279	ENDIF
	280	ENDIF
[1108]	281	#endif
[102]	282	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	283	ADJUSTR( host_chr )
[1]	284	#if defined( __parallel )
	285	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	286	char1 = 'calculated'
	287	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	288	host(1:2) == 'lc' ) .AND. &
	289	npex == -1 .AND. pdims(2) == 1 ) THEN
	290	char1 = 'forced'
	291	ELSE
	292	char1 = 'predefined'
	293	ENDIF
	294	IF ( threads_per_task == 1 ) THEN
[102]	295	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	296	ELSE
[102]	297	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	298	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	299	ENDIF
[1111]	300	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
[1]	301	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	302	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	303	npex == -1 .AND. pdims(2) == 1 ) &
	304	THEN
[102]	305	WRITE ( io, 106 )
[1]	306	ELSEIF ( pdims(2) == 1 ) THEN
[102]	307	WRITE ( io, 107 ) 'x'
[1]	308	ELSEIF ( pdims(1) == 1 ) THEN
[102]	309	WRITE ( io, 107 ) 'y'
[1]	310	ENDIF
[102]	311	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	312	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	313	WRITE ( io, 108 ) maximum_parallel_io_streams
	314	ENDIF
[1111]	315	#else
	316	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
[1]	317	#endif
	318	WRITE ( io, 99 )
	319
	320	!
	321	!-- Numerical schemes
	322	WRITE ( io, 110 )
	323	IF ( psolver(1:7) == 'poisfft' ) THEN
	324	WRITE ( io, 111 ) TRIM( fft_method )
	325	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	326	ELSEIF ( psolver == 'sor' ) THEN
	327	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	328	ELSEIF ( psolver == 'multigrid' ) THEN
	329	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	330	IF ( mg_cycles == -1 ) THEN
	331	WRITE ( io, 140 ) residual_limit
	332	ELSE
	333	WRITE ( io, 141 ) mg_cycles
	334	ENDIF
	335	IF ( mg_switch_to_pe0_level == 0 ) THEN
	336	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	337	nzt_mg(1)
[197]	338	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	339	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	340	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	341	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	342	nzt_mg(mg_switch_to_pe0_level), &
	343	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	344	nzt_mg(1)
	345	ENDIF
[927]	346	IF ( masking_method ) WRITE ( io, 144 )
[1]	347	ENDIF
	348	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	349	THEN
	350	WRITE ( io, 142 )
	351	ENDIF
	352
	353	IF ( momentum_advec == 'pw-scheme' ) THEN
	354	WRITE ( io, 113 )
[667]	355	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	356	WRITE ( io, 503 )
[1]	357	ENDIF
	358	IF ( scalar_advec == 'pw-scheme' ) THEN
	359	WRITE ( io, 116 )
[667]	360	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	361	WRITE ( io, 504 )
[1]	362	ELSE
	363	WRITE ( io, 118 )
	364	ENDIF
[63]	365
	366	WRITE ( io, 139 ) TRIM( loop_optimization )
	367
[1]	368	IF ( galilei_transformation ) THEN
	369	IF ( use_ug_for_galilei_tr ) THEN
[868]	370	char1 = '0.6 * geostrophic wind'
[1]	371	ELSE
	372	char1 = 'mean wind in model domain'
	373	ENDIF
	374	IF ( simulated_time_at_begin == simulated_time ) THEN
	375	char2 = 'at the start of the run'
	376	ELSE
	377	char2 = 'at the end of the run'
	378	ENDIF
	379	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	380	advected_distance_x/1000.0, advected_distance_y/1000.0
	381	ENDIF
[1001]	382	WRITE ( io, 122 ) timestep_scheme
[87]	383	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	384	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	385	IF ( .NOT. ocean ) THEN
	386	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	387	rayleigh_damping_factor
	388	ELSE
	389	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	390	rayleigh_damping_factor
	391	ENDIF
[1]	392	ENDIF
[940]	393	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	394	IF ( humidity ) THEN
[1]	395	IF ( .NOT. cloud_physics ) THEN
	396	WRITE ( io, 129 )
	397	ELSE
	398	WRITE ( io, 130 )
	399	ENDIF
	400	ENDIF
	401	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	402	IF ( conserve_volume_flow ) THEN
[241]	403	WRITE ( io, 150 ) conserve_volume_flow_mode
	404	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	405	WRITE ( io, 151 ) u_bulk, v_bulk
	406	ENDIF
[240]	407	ELSEIF ( dp_external ) THEN
	408	IF ( dp_smooth ) THEN
[241]	409	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	410	ELSE
[241]	411	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	412	ENDIF
	413	ENDIF
[411]	414	IF ( large_scale_subsidence ) THEN
	415	WRITE ( io, 153 )
	416	WRITE ( io, 154 )
	417	ENDIF
[1]	418	WRITE ( io, 99 )
	419
	420	!
	421	!-- Runtime and timestep informations
	422	WRITE ( io, 200 )
	423	IF ( .NOT. dt_fixed ) THEN
	424	WRITE ( io, 201 ) dt_max, cfl_factor
	425	ELSE
	426	WRITE ( io, 202 ) dt
	427	ENDIF
	428	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	429
	430	IF ( time_restart /= 9999999.9 .AND. &
	431	simulated_time_at_begin == simulated_time ) THEN
	432	IF ( dt_restart == 9999999.9 ) THEN
	433	WRITE ( io, 204 ) ' Restart at: ',time_restart
	434	ELSE
	435	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	436	ENDIF
	437	ENDIF
	438
	439	IF ( simulated_time_at_begin /= simulated_time ) THEN
	440	i = MAX ( log_point_s(10)%counts, 1 )
	441	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	442	cpuseconds_per_simulated_second = 0.0
	443	ELSE
	444	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	445	( simulated_time - &
	446	simulated_time_at_begin )
	447	ENDIF
	448	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	449	log_point_s(10)%sum / REAL( i ), &
	450	cpuseconds_per_simulated_second
	451	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	452	IF ( dt_restart == 9999999.9 ) THEN
[1106]	453	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	454	ELSE
[1106]	455	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	456	ENDIF
	457	ENDIF
	458	ENDIF
	459
	460	!
[291]	461	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	462	!-- and ocean are used or have been used. In this case, coupling_start_time
	463	!-- defines the time when the coupling is switched on.
[291]	464	IF ( coupling_start_time /= 0.0 ) THEN
[1106]	465	WRITE ( io, 207 ) coupling_start_time
[291]	466	ENDIF
	467
	468	!
[1]	469	!-- Computational grid
[94]	470	IF ( .NOT. ocean ) THEN
	471	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	472	IF ( dz_stretch_level_index < nzt+1 ) THEN
	473	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	474	dz_stretch_factor, dz_max
	475	ENDIF
	476	ELSE
	477	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	478	IF ( dz_stretch_level_index > 0 ) THEN
	479	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	480	dz_stretch_factor, dz_max
	481	ENDIF
[1]	482	ENDIF
	483	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	484	MIN( nnz+2, nzt+2 )
	485	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	486
	487	!
	488	!-- Topography
	489	WRITE ( io, 270 ) topography
	490	SELECT CASE ( TRIM( topography ) )
	491
	492	CASE ( 'flat' )
	493	! no actions necessary
	494
	495	CASE ( 'single_building' )
	496	blx = INT( building_length_x / dx )
	497	bly = INT( building_length_y / dy )
	498	bh = INT( building_height / dz )
	499
	500	IF ( building_wall_left == 9999999.9 ) THEN
	501	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	502	ENDIF
	503	bxl = INT ( building_wall_left / dx + 0.5 )
	504	bxr = bxl + blx
	505
	506	IF ( building_wall_south == 9999999.9 ) THEN
	507	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	508	ENDIF
	509	bys = INT ( building_wall_south / dy + 0.5 )
	510	byn = bys + bly
	511
	512	WRITE ( io, 271 ) building_length_x, building_length_y, &
	513	building_height, bxl, bxr, bys, byn
	514
[240]	515	CASE ( 'single_street_canyon' )
	516	ch = NINT( canyon_height / dz )
	517	IF ( canyon_width_x /= 9999999.9 ) THEN
	518	!
	519	!-- Street canyon in y direction
	520	cwx = NINT( canyon_width_x / dx )
	521	IF ( canyon_wall_left == 9999999.9 ) THEN
	522	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	523	ENDIF
	524	cxl = NINT( canyon_wall_left / dx )
	525	cxr = cxl + cwx
	526	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	527
	528	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	529	!
	530	!-- Street canyon in x direction
	531	cwy = NINT( canyon_width_y / dy )
	532	IF ( canyon_wall_south == 9999999.9 ) THEN
	533	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	534	ENDIF
	535	cys = NINT( canyon_wall_south / dy )
	536	cyn = cys + cwy
	537	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	538	ENDIF
	539
[1]	540	END SELECT
	541
[256]	542	IF ( TRIM( topography ) /= 'flat' ) THEN
	543	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	544	IF ( TRIM( topography ) == 'single_building' .OR. &
	545	TRIM( topography ) == 'single_street_canyon' ) THEN
	546	WRITE ( io, 278 )
	547	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	548	WRITE ( io, 279 )
	549	ENDIF
	550	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	551	WRITE ( io, 278 )
	552	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	553	WRITE ( io, 279 )
	554	ENDIF
	555	ENDIF
	556
[138]	557	IF ( plant_canopy ) THEN
	558
	559	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	560	IF ( passive_scalar ) THEN
	561	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	562	leaf_surface_concentration
	563	ENDIF
[138]	564
[1]	565	!
[153]	566	!-- Heat flux at the top of vegetation
	567	WRITE ( io, 282 ) cthf
	568
	569	!
[138]	570	!-- Leaf area density profile
	571	!-- Building output strings, starting with surface value
[833]	572	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	573	gradients = '------'
	574	slices = ' 0'
	575	coordinates = ' 0.0'
	576	i = 1
	577	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	578
	579	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	580	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	581
	582	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	583	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	584
	585	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	586	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	587
	588	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	589	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	590
	591	i = i + 1
	592	ENDDO
	593
[153]	594	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	595	TRIM( gradients ), TRIM( slices )
	596
	597	ENDIF
	598
	599	!
[1]	600	!-- Boundary conditions
	601	IF ( ibc_p_b == 0 ) THEN
	602	runten = 'p(0) = 0 \|'
	603	ELSEIF ( ibc_p_b == 1 ) THEN
	604	runten = 'p(0) = p(1) \|'
	605	ENDIF
	606	IF ( ibc_p_t == 0 ) THEN
	607	roben = 'p(nzt+1) = 0 \|'
	608	ELSE
	609	roben = 'p(nzt+1) = p(nzt) \|'
	610	ENDIF
	611
	612	IF ( ibc_uv_b == 0 ) THEN
	613	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	614	ELSE
	615	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	616	ENDIF
[132]	617	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	618	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	619	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	620	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	621	ELSE
	622	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	623	ENDIF
	624
	625	IF ( ibc_pt_b == 0 ) THEN
	626	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	627	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	628	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	629	ELSEIF ( ibc_pt_b == 2 ) THEN
	630	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	631	ENDIF
	632	IF ( ibc_pt_t == 0 ) THEN
[19]	633	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	634	ELSEIF( ibc_pt_t == 1 ) THEN
	635	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	636	ELSEIF( ibc_pt_t == 2 ) THEN
	637	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	638
[1]	639	ENDIF
	640
	641	WRITE ( io, 300 ) runten, roben
	642
	643	IF ( .NOT. constant_diffusion ) THEN
	644	IF ( ibc_e_b == 1 ) THEN
	645	runten = 'e(0) = e(1)'
	646	ELSE
	647	runten = 'e(0) = e(1) = (u/0.1)*2'
	648	ENDIF
	649	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	650
[97]	651	WRITE ( io, 301 ) 'e', runten, roben
[1]	652
	653	ENDIF
	654
[97]	655	IF ( ocean ) THEN
	656	runten = 'sa(0) = sa(1)'
	657	IF ( ibc_sa_t == 0 ) THEN
	658	roben = 'sa(nzt+1) = sa_surface'
[1]	659	ELSE
[97]	660	roben = 'sa(nzt+1) = sa(nzt)'
[1]	661	ENDIF
[97]	662	WRITE ( io, 301 ) 'sa', runten, roben
	663	ENDIF
[1]	664
[97]	665	IF ( humidity ) THEN
	666	IF ( ibc_q_b == 0 ) THEN
	667	runten = 'q(0) = q_surface'
	668	ELSE
	669	runten = 'q(0) = q(1)'
	670	ENDIF
	671	IF ( ibc_q_t == 0 ) THEN
	672	roben = 'q(nzt) = q_top'
	673	ELSE
	674	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	675	ENDIF
	676	WRITE ( io, 301 ) 'q', runten, roben
	677	ENDIF
[1]	678
[97]	679	IF ( passive_scalar ) THEN
	680	IF ( ibc_q_b == 0 ) THEN
	681	runten = 's(0) = s_surface'
	682	ELSE
	683	runten = 's(0) = s(1)'
	684	ENDIF
	685	IF ( ibc_q_t == 0 ) THEN
	686	roben = 's(nzt) = s_top'
	687	ELSE
	688	roben = 's(nzt) = s(nzt-1) + ds/dz'
	689	ENDIF
	690	WRITE ( io, 301 ) 's', runten, roben
[1]	691	ENDIF
	692
	693	IF ( use_surface_fluxes ) THEN
	694	WRITE ( io, 303 )
	695	IF ( constant_heatflux ) THEN
	696	WRITE ( io, 306 ) surface_heatflux
	697	IF ( random_heatflux ) WRITE ( io, 307 )
	698	ENDIF
[75]	699	IF ( humidity .AND. constant_waterflux ) THEN
[1]	700	WRITE ( io, 311 ) surface_waterflux
	701	ENDIF
	702	IF ( passive_scalar .AND. constant_waterflux ) THEN
	703	WRITE ( io, 313 ) surface_waterflux
	704	ENDIF
	705	ENDIF
	706
[19]	707	IF ( use_top_fluxes ) THEN
	708	WRITE ( io, 304 )
[102]	709	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	710	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	711	IF ( constant_top_heatflux ) THEN
	712	WRITE ( io, 306 ) top_heatflux
	713	ENDIF
	714	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	715	WRITE ( io, 316 )
[19]	716	ENDIF
[97]	717	IF ( ocean .AND. constant_top_salinityflux ) THEN
	718	WRITE ( io, 309 ) top_salinityflux
	719	ENDIF
[75]	720	IF ( humidity .OR. passive_scalar ) THEN
[19]	721	WRITE ( io, 315 )
	722	ENDIF
	723	ENDIF
	724
[1]	725	IF ( prandtl_layer ) THEN
[978]	726	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	727	z0h_factor*roughness_length, kappa, &
[94]	728	rif_min, rif_max
[1]	729	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	730	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	731	WRITE ( io, 312 )
	732	ENDIF
	733	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	734	WRITE ( io, 314 )
	735	ENDIF
	736	ELSE
	737	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	738	WRITE ( io, 310 ) rif_min, rif_max
	739	ENDIF
	740	ENDIF
	741
	742	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	743	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	744	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	745	IF ( turbulent_inflow ) THEN
	746	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	747	inflow_damping_height, inflow_damping_width
	748	ENDIF
[1]	749	ENDIF
	750
	751	!
	752	!-- Listing of 1D-profiles
[151]	753	WRITE ( io, 325 ) dt_dopr_listing
[1]	754	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	755	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	756	ENDIF
	757
	758	!
	759	!-- DATA output
	760	WRITE ( io, 330 )
	761	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	762	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	763	ENDIF
	764
	765	!
	766	!-- 1D-profiles
[346]	767	dopr_chr = 'Profile:'
[1]	768	IF ( dopr_n /= 0 ) THEN
	769	WRITE ( io, 331 )
	770
	771	output_format = ''
	772	IF ( netcdf_output ) THEN
[1031]	773	output_format = output_format_netcdf
[1]	774	ENDIF
[292]	775	WRITE ( io, 344 ) output_format
[1]	776
	777	DO i = 1, dopr_n
	778	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	779	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	780	WRITE ( io, 332 ) dopr_chr
	781	dopr_chr = ' :'
	782	ENDIF
	783	ENDDO
	784
	785	IF ( dopr_chr /= '' ) THEN
	786	WRITE ( io, 332 ) dopr_chr
	787	ENDIF
	788	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	789	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	790	ENDIF
	791
	792	!
	793	!-- 2D-arrays
	794	DO av = 0, 1
	795
	796	i = 1
	797	do2d_xy = ''
	798	do2d_xz = ''
	799	do2d_yz = ''
	800	DO WHILE ( do2d(av,i) /= ' ' )
	801
	802	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	803	do2d_mode = do2d(av,i)(l-1:l)
	804
	805	SELECT CASE ( do2d_mode )
	806	CASE ( 'xy' )
	807	ll = LEN_TRIM( do2d_xy )
	808	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	809	CASE ( 'xz' )
	810	ll = LEN_TRIM( do2d_xz )
	811	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	812	CASE ( 'yz' )
	813	ll = LEN_TRIM( do2d_yz )
	814	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	815	END SELECT
	816
	817	i = i + 1
	818
	819	ENDDO
	820
	821	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	822	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	823	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	824	( netcdf_output .OR. iso2d_output ) ) THEN
	825
	826	IF ( av == 0 ) THEN
	827	WRITE ( io, 334 ) ''
	828	ELSE
	829	WRITE ( io, 334 ) '(time-averaged)'
	830	ENDIF
	831
	832	IF ( do2d_at_begin ) THEN
	833	begin_chr = 'and at the start'
	834	ELSE
	835	begin_chr = ''
	836	ENDIF
	837
	838	output_format = ''
	839	IF ( netcdf_output ) THEN
[1031]	840	output_format = output_format_netcdf
[1]	841	ENDIF
	842	IF ( iso2d_output ) THEN
	843	IF ( netcdf_output ) THEN
[1031]	844	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	845	ELSE
	846	output_format = 'iso2d'
	847	ENDIF
	848	ENDIF
[292]	849	WRITE ( io, 344 ) output_format
[1]	850
	851	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	852	i = 1
	853	slices = '/'
	854	coordinates = '/'
	855	!
	856	!-- Building strings with index and coordinate informations of the
	857	!-- slices
	858	DO WHILE ( section(i,1) /= -9999 )
	859
	860	WRITE (section_chr,'(I5)') section(i,1)
	861	section_chr = ADJUSTL( section_chr )
	862	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	863
[206]	864	IF ( section(i,1) == -1 ) THEN
	865	WRITE (coor_chr,'(F10.1)') -1.0
	866	ELSE
	867	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	868	ENDIF
[1]	869	coor_chr = ADJUSTL( coor_chr )
	870	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	871
	872	i = i + 1
	873	ENDDO
	874	IF ( av == 0 ) THEN
	875	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	876	TRIM( begin_chr ), 'k', TRIM( slices ), &
	877	TRIM( coordinates )
	878	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	879	WRITE ( io, 339 ) skip_time_do2d_xy
	880	ENDIF
	881	ELSE
	882	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	883	TRIM( begin_chr ), averaging_interval, &
	884	dt_averaging_input, 'k', TRIM( slices ), &
	885	TRIM( coordinates )
	886	IF ( skip_time_data_output_av /= 0.0 ) THEN
	887	WRITE ( io, 339 ) skip_time_data_output_av
	888	ENDIF
	889	ENDIF
	890
	891	ENDIF
	892
	893	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	894	i = 1
	895	slices = '/'
	896	coordinates = '/'
	897	!
	898	!-- Building strings with index and coordinate informations of the
	899	!-- slices
	900	DO WHILE ( section(i,2) /= -9999 )
	901
	902	WRITE (section_chr,'(I5)') section(i,2)
	903	section_chr = ADJUSTL( section_chr )
	904	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	905
	906	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	907	coor_chr = ADJUSTL( coor_chr )
	908	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	909
	910	i = i + 1
	911	ENDDO
	912	IF ( av == 0 ) THEN
	913	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	914	TRIM( begin_chr ), 'j', TRIM( slices ), &
	915	TRIM( coordinates )
	916	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	917	WRITE ( io, 339 ) skip_time_do2d_xz
	918	ENDIF
	919	ELSE
	920	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	921	TRIM( begin_chr ), averaging_interval, &
	922	dt_averaging_input, 'j', TRIM( slices ), &
	923	TRIM( coordinates )
	924	IF ( skip_time_data_output_av /= 0.0 ) THEN
	925	WRITE ( io, 339 ) skip_time_data_output_av
	926	ENDIF
	927	ENDIF
	928	ENDIF
	929
	930	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	931	i = 1
	932	slices = '/'
	933	coordinates = '/'
	934	!
	935	!-- Building strings with index and coordinate informations of the
	936	!-- slices
	937	DO WHILE ( section(i,3) /= -9999 )
	938
	939	WRITE (section_chr,'(I5)') section(i,3)
	940	section_chr = ADJUSTL( section_chr )
	941	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	942
	943	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	944	coor_chr = ADJUSTL( coor_chr )
	945	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	946
	947	i = i + 1
	948	ENDDO
	949	IF ( av == 0 ) THEN
	950	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	951	TRIM( begin_chr ), 'i', TRIM( slices ), &
	952	TRIM( coordinates )
	953	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	954	WRITE ( io, 339 ) skip_time_do2d_yz
	955	ENDIF
	956	ELSE
	957	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	958	TRIM( begin_chr ), averaging_interval, &
	959	dt_averaging_input, 'i', TRIM( slices ), &
	960	TRIM( coordinates )
	961	IF ( skip_time_data_output_av /= 0.0 ) THEN
	962	WRITE ( io, 339 ) skip_time_data_output_av
	963	ENDIF
	964	ENDIF
	965	ENDIF
	966
	967	ENDIF
	968
	969	ENDDO
	970
	971	!
	972	!-- 3d-arrays
	973	DO av = 0, 1
	974
	975	i = 1
	976	do3d_chr = ''
	977	DO WHILE ( do3d(av,i) /= ' ' )
	978
	979	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	980	i = i + 1
	981
	982	ENDDO
	983
	984	IF ( do3d_chr /= '' ) THEN
	985	IF ( av == 0 ) THEN
	986	WRITE ( io, 336 ) ''
	987	ELSE
	988	WRITE ( io, 336 ) '(time-averaged)'
	989	ENDIF
	990
	991	output_format = ''
	992	IF ( netcdf_output ) THEN
[1031]	993	output_format = output_format_netcdf
[1]	994	ENDIF
	995	IF ( avs_output ) THEN
	996	IF ( netcdf_output ) THEN
[1031]	997	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	998	ELSE
	999	output_format = 'avs'
	1000	ENDIF
	1001	ENDIF
[292]	1002	WRITE ( io, 344 ) output_format
[1]	1003
	1004	IF ( do3d_at_begin ) THEN
	1005	begin_chr = 'and at the start'
	1006	ELSE
	1007	begin_chr = ''
	1008	ENDIF
	1009	IF ( av == 0 ) THEN
	1010	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1011	zu(nz_do3d), nz_do3d
	1012	ELSE
	1013	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1014	TRIM( begin_chr ), averaging_interval, &
	1015	dt_averaging_input, zu(nz_do3d), nz_do3d
	1016	ENDIF
	1017
	1018	IF ( do3d_compress ) THEN
	1019	do3d_chr = ''
	1020	i = 1
	1021	DO WHILE ( do3d(av,i) /= ' ' )
	1022
	1023	SELECT CASE ( do3d(av,i) )
	1024	CASE ( 'u' )
	1025	j = 1
	1026	CASE ( 'v' )
	1027	j = 2
	1028	CASE ( 'w' )
	1029	j = 3
	1030	CASE ( 'p' )
	1031	j = 4
	1032	CASE ( 'pt' )
	1033	j = 5
	1034	END SELECT
	1035	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1036	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1037	':' // prec // ','
	1038	i = i + 1
	1039
	1040	ENDDO
	1041	WRITE ( io, 338 ) do3d_chr
	1042
	1043	ENDIF
	1044
	1045	IF ( av == 0 ) THEN
	1046	IF ( skip_time_do3d /= 0.0 ) THEN
	1047	WRITE ( io, 339 ) skip_time_do3d
	1048	ENDIF
	1049	ELSE
	1050	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1051	WRITE ( io, 339 ) skip_time_data_output_av
	1052	ENDIF
	1053	ENDIF
	1054
	1055	ENDIF
	1056
	1057	ENDDO
	1058
	1059	!
[410]	1060	!-- masked arrays
	1061	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1062	mask_scale_x, mask_scale_y, mask_scale_z
	1063	DO mid = 1, masks
	1064	DO av = 0, 1
	1065
	1066	i = 1
	1067	domask_chr = ''
	1068	DO WHILE ( domask(mid,av,i) /= ' ' )
	1069	domask_chr = TRIM( domask_chr ) // ' ' // &
	1070	TRIM( domask(mid,av,i) ) // ','
	1071	i = i + 1
	1072	ENDDO
	1073
	1074	IF ( domask_chr /= '' ) THEN
	1075	IF ( av == 0 ) THEN
	1076	WRITE ( io, 346 ) '', mid
	1077	ELSE
	1078	WRITE ( io, 346 ) ' (time-averaged)', mid
	1079	ENDIF
	1080
[1031]	1081	output_format = ' '
[410]	1082	IF ( netcdf_output ) THEN
[1031]	1083	output_format = output_format_netcdf
[410]	1084	ENDIF
	1085	WRITE ( io, 344 ) output_format
	1086
	1087	IF ( av == 0 ) THEN
	1088	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1089	ELSE
	1090	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1091	averaging_interval, dt_averaging_input
	1092	ENDIF
	1093
	1094	IF ( av == 0 ) THEN
	1095	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1096	WRITE ( io, 339 ) skip_time_domask(mid)
	1097	ENDIF
	1098	ELSE
	1099	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1100	WRITE ( io, 339 ) skip_time_data_output_av
	1101	ENDIF
	1102	ENDIF
	1103	!
	1104	!-- output locations
	1105	DO dim = 1, 3
	1106	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1107	count = 0
	1108	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1109	count = count + 1
	1110	ENDDO
	1111	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1112	mask(mid,dim,:count)
	1113	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1114	mask_loop(mid,dim,2) < 0.0 .AND. &
	1115	mask_loop(mid,dim,3) == 0.0 ) THEN
	1116	WRITE ( io, 350 ) dir(dim), dir(dim)
	1117	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1118	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1119	mask_loop(mid,dim,1:2)
	1120	ELSE
	1121	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1122	mask_loop(mid,dim,1:3)
	1123	ENDIF
	1124	ENDDO
	1125	ENDIF
	1126
	1127	ENDDO
	1128	ENDDO
	1129
	1130	!
[1]	1131	!-- Timeseries
	1132	IF ( dt_dots /= 9999999.9 ) THEN
	1133	WRITE ( io, 340 )
	1134
	1135	output_format = ''
	1136	IF ( netcdf_output ) THEN
[1031]	1137	output_format = output_format_netcdf
[1]	1138	ENDIF
[292]	1139	WRITE ( io, 344 ) output_format
[1]	1140	WRITE ( io, 341 ) dt_dots
	1141	ENDIF
	1142
	1143	#if defined( __dvrp_graphics )
	1144	!
	1145	!-- Dvrp-output
	1146	IF ( dt_dvrp /= 9999999.9 ) THEN
	1147	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1148	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1149	i = 1
	1150	l = 0
[336]	1151	m = 0
[1]	1152	DO WHILE ( mode_dvrp(i) /= ' ' )
	1153	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1154	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1155	l = l + 1
	1156	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1157	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1158	isosurface_color(:,l)
[1]	1159	ENDIF
	1160	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1161	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1162	m = m + 1
	1163	IF ( do2d(0,j) /= ' ' ) THEN
	1164	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1165	slicer_range_limits_dvrp(:,m)
	1166	ENDIF
[1]	1167	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1168	WRITE ( io, 363 ) dvrp_psize
	1169	IF ( particle_dvrpsize /= 'none' ) THEN
	1170	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1171	dvrpsize_interval
	1172	ENDIF
	1173	IF ( particle_color /= 'none' ) THEN
	1174	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1175	color_interval
	1176	ENDIF
[1]	1177	ENDIF
	1178	i = i + 1
	1179	ENDDO
[237]	1180
[336]	1181	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1182	superelevation_y, superelevation, clip_dvrp_l, &
	1183	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1184
	1185	IF ( TRIM( topography ) /= 'flat' ) THEN
	1186	WRITE ( io, 366 ) topography_color
	1187	IF ( cluster_size > 1 ) THEN
	1188	WRITE ( io, 367 ) cluster_size
	1189	ENDIF
[237]	1190	ENDIF
	1191
[1]	1192	ENDIF
	1193	#endif
	1194
	1195	#if defined( __spectra )
	1196	!
	1197	!-- Spectra output
	1198	IF ( dt_dosp /= 9999999.9 ) THEN
	1199	WRITE ( io, 370 )
	1200
[1031]	1201	output_format = ' '
[1]	1202	IF ( netcdf_output ) THEN
[1031]	1203	output_format = output_format_netcdf
[1]	1204	ENDIF
[292]	1205	WRITE ( io, 344 ) output_format
[1]	1206	WRITE ( io, 371 ) dt_dosp
	1207	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1208	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1209	( spectra_direction(i), i = 1,10 ), &
[189]	1210	( comp_spectra_level(i), i = 1,100 ), &
	1211	( plot_spectra_level(i), i = 1,100 ), &
[1]	1212	averaging_interval_sp, dt_averaging_input_pr
	1213	ENDIF
	1214	#endif
	1215
	1216	WRITE ( io, 99 )
	1217
	1218	!
	1219	!-- Physical quantities
	1220	WRITE ( io, 400 )
	1221
	1222	!
	1223	!-- Geostrophic parameters
	1224	WRITE ( io, 410 ) omega, phi, f, fs
	1225
	1226	!
	1227	!-- Other quantities
	1228	WRITE ( io, 411 ) g
[97]	1229	IF ( use_reference ) THEN
	1230	IF ( ocean ) THEN
	1231	WRITE ( io, 412 ) prho_reference
	1232	ELSE
	1233	WRITE ( io, 413 ) pt_reference
	1234	ENDIF
	1235	ENDIF
[1]	1236
	1237	!
	1238	!-- Cloud physics parameters
	1239	IF ( cloud_physics ) THEN
[57]	1240	WRITE ( io, 415 )
	1241	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1115]	1242	IF ( icloud_scheme == 0 ) THEN
	1243	WRITE ( io, 510 ) 1.0E-6 * nc_const
	1244	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
	1245	ENDIF
[1]	1246	ENDIF
	1247
	1248	!-- Profile of the geostrophic wind (component ug)
	1249	!-- Building output strings
	1250	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1251	gradients = '------'
	1252	slices = ' 0'
	1253	coordinates = ' 0.0'
	1254	i = 1
	1255	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1256
[167]	1257	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1258	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1259
[167]	1260	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1261	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1262
[167]	1263	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1264	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1265
[167]	1266	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1267	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1268
[430]	1269	IF ( i == 10 ) THEN
	1270	EXIT
	1271	ELSE
	1272	i = i + 1
	1273	ENDIF
	1274
[1]	1275	ENDDO
	1276
	1277	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1278	TRIM( gradients ), TRIM( slices )
	1279
	1280	!-- Profile of the geostrophic wind (component vg)
	1281	!-- Building output strings
	1282	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1283	gradients = '------'
	1284	slices = ' 0'
	1285	coordinates = ' 0.0'
	1286	i = 1
	1287	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1288
[167]	1289	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1290	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1291
[167]	1292	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1293	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1294
[167]	1295	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1296	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1297
[167]	1298	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1299	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1300
[430]	1301	IF ( i == 10 ) THEN
	1302	EXIT
	1303	ELSE
	1304	i = i + 1
	1305	ENDIF
	1306
[1]	1307	ENDDO
	1308
	1309	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1310	TRIM( gradients ), TRIM( slices )
	1311
	1312	!
[767]	1313	!-- Initial wind profiles
	1314	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1315
	1316	!
[1]	1317	!-- Initial temperature profile
	1318	!-- Building output strings, starting with surface temperature
	1319	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1320	gradients = '------'
	1321	slices = ' 0'
	1322	coordinates = ' 0.0'
	1323	i = 1
	1324	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1325
[94]	1326	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1327	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1328
[94]	1329	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1330	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1331
[94]	1332	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1333	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1334
[94]	1335	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1336	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1337
[430]	1338	IF ( i == 10 ) THEN
	1339	EXIT
	1340	ELSE
	1341	i = i + 1
	1342	ENDIF
	1343
[1]	1344	ENDDO
	1345
	1346	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1347	TRIM( gradients ), TRIM( slices )
	1348
	1349	!
	1350	!-- Initial humidity profile
	1351	!-- Building output strings, starting with surface humidity
[75]	1352	IF ( humidity .OR. passive_scalar ) THEN
[1]	1353	WRITE ( temperatures, '(E8.1)' ) q_surface
	1354	gradients = '--------'
	1355	slices = ' 0'
	1356	coordinates = ' 0.0'
	1357	i = 1
	1358	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1359
	1360	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1361	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1362
	1363	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1364	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1365
	1366	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1367	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1368
	1369	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1370	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1371
[430]	1372	IF ( i == 10 ) THEN
	1373	EXIT
	1374	ELSE
	1375	i = i + 1
	1376	ENDIF
	1377
[1]	1378	ENDDO
	1379
[75]	1380	IF ( humidity ) THEN
[1]	1381	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1382	TRIM( gradients ), TRIM( slices )
	1383	ELSE
	1384	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1385	TRIM( gradients ), TRIM( slices )
	1386	ENDIF
	1387	ENDIF
	1388
	1389	!
[97]	1390	!-- Initial salinity profile
	1391	!-- Building output strings, starting with surface salinity
	1392	IF ( ocean ) THEN
	1393	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1394	gradients = '------'
	1395	slices = ' 0'
	1396	coordinates = ' 0.0'
	1397	i = 1
	1398	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1399
	1400	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1401	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1402
	1403	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1404	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1405
	1406	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1407	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1408
	1409	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1410	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1411
[430]	1412	IF ( i == 10 ) THEN
	1413	EXIT
	1414	ELSE
	1415	i = i + 1
	1416	ENDIF
	1417
[97]	1418	ENDDO
	1419
	1420	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1421	TRIM( gradients ), TRIM( slices )
	1422	ENDIF
	1423
	1424	!
[411]	1425	!-- Profile for the large scale vertial velocity
	1426	!-- Building output strings, starting with surface value
	1427	IF ( large_scale_subsidence ) THEN
	1428	temperatures = ' 0.0'
	1429	gradients = '------'
	1430	slices = ' 0'
	1431	coordinates = ' 0.0'
	1432	i = 1
[580]	1433	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1434
	1435	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1436	w_subs(subs_vertical_gradient_level_i(i))
[411]	1437	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1438
[580]	1439	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1440	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1441
[580]	1442	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1443	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1444
[580]	1445	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1446	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1447
[430]	1448	IF ( i == 10 ) THEN
	1449	EXIT
	1450	ELSE
	1451	i = i + 1
	1452	ENDIF
	1453
[411]	1454	ENDDO
	1455
	1456	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1457	TRIM( gradients ), TRIM( slices )
	1458	ENDIF
	1459
	1460	!
[824]	1461	!-- Cloud physcis parameters / quantities / numerical methods
	1462	WRITE ( io, 430 )
	1463	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1464	WRITE ( io, 431 )
	1465	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1466	WRITE ( io, 432 )
[1115]	1467	IF ( radiation ) WRITE ( io, 132 )
	1468	IF ( icloud_scheme == 1 ) THEN
	1469	IF ( precipitation ) WRITE ( io, 133 )
	1470	ELSEIF ( icloud_scheme == 0 ) THEN
	1471	IF ( drizzle ) WRITE ( io, 506 )
	1472	IF ( precipitation ) THEN
	1473	WRITE ( io, 505 )
	1474	IF ( turbulence ) WRITE ( io, 507 )
	1475	IF ( ventilation_effect ) WRITE ( io, 508 )
	1476	IF ( limiter_sedimentation ) WRITE ( io, 509 )
	1477	ENDIF
	1478	ENDIF
[824]	1479	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1480	WRITE ( io, 433 )
	1481	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1482	IF ( collision_kernel /= 'none' ) THEN
	1483	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1484	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1485	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1486	ENDIF
[825]	1487	ELSE
[828]	1488	WRITE ( io, 437 )
[825]	1489	ENDIF
[824]	1490	ENDIF
	1491
	1492	!
[1]	1493	!-- LES / turbulence parameters
	1494	WRITE ( io, 450 )
	1495
	1496	!--
	1497	! ... LES-constants used must still be added here
	1498	!--
	1499	IF ( constant_diffusion ) THEN
	1500	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1501	prandtl_number
	1502	ENDIF
	1503	IF ( .NOT. constant_diffusion) THEN
[108]	1504	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1505	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1506	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1507	ENDIF
	1508
	1509	!
	1510	!-- Special actions during the run
	1511	WRITE ( io, 470 )
	1512	IF ( create_disturbances ) THEN
	1513	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1514	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1515	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1516	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1517	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1518	ELSE
	1519	WRITE ( io, 473 ) disturbance_energy_limit
	1520	ENDIF
	1521	WRITE ( io, 474 ) TRIM( random_generator )
	1522	ENDIF
	1523	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1524	WRITE ( io, 475 ) pt_surface_initial_change
	1525	ENDIF
[75]	1526	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1527	WRITE ( io, 476 ) q_surface_initial_change
	1528	ENDIF
	1529	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1530	WRITE ( io, 477 ) q_surface_initial_change
	1531	ENDIF
	1532
[60]	1533	IF ( particle_advection ) THEN
[1]	1534	!
[60]	1535	!-- Particle attributes
	1536	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1537	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1538	end_time_prel, dt_sort_particles
[60]	1539	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1540	IF ( random_start_position ) WRITE ( io, 481 )
	1541	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1542	WRITE ( io, 495 ) total_number_of_particles
[824]	1543	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1544	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1545	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1546	WRITE ( io, 484 ) total_number_of_tails, &
	1547	minimum_tailpoint_distance, &
	1548	maximum_tailpoint_age
	1549	ENDIF
[1]	1550	ENDIF
[60]	1551	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1552	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1553	output_format = ' '
[60]	1554	IF ( netcdf_output ) THEN
[493]	1555	IF ( netcdf_data_format > 1 ) THEN
[60]	1556	output_format = 'netcdf (64 bit offset) and binary'
	1557	ELSE
	1558	output_format = 'netcdf and binary'
	1559	ENDIF
[1]	1560	ELSE
[60]	1561	output_format = 'binary'
[1]	1562	ENDIF
[292]	1563	WRITE ( io, 344 ) output_format
[1]	1564	ENDIF
[60]	1565	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1566	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1567
[60]	1568	WRITE ( io, 487 ) number_of_particle_groups
[1]	1569
[60]	1570	DO i = 1, number_of_particle_groups
	1571	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1572	WRITE ( io, 490 ) i, 0.0
	1573	WRITE ( io, 492 )
[1]	1574	ELSE
[60]	1575	WRITE ( io, 490 ) i, radius(i)
	1576	IF ( density_ratio(i) /= 0.0 ) THEN
	1577	WRITE ( io, 491 ) density_ratio(i)
	1578	ELSE
	1579	WRITE ( io, 492 )
	1580	ENDIF
[1]	1581	ENDIF
[60]	1582	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1583	pdx(i), pdy(i), pdz(i)
[336]	1584	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1585	ENDDO
[1]	1586
[60]	1587	ENDIF
[1]	1588
[60]	1589
[1]	1590	!
	1591	!-- Parameters of 1D-model
	1592	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1593	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1594	mixing_length_1d, dissipation_1d
	1595	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1596	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1597	ENDIF
	1598	ENDIF
	1599
	1600	!
	1601	!-- User-defined informations
	1602	CALL user_header( io )
	1603
	1604	WRITE ( io, 99 )
	1605
	1606	!
	1607	!-- Write buffer contents to disc immediately
[82]	1608	CALL local_flush( io )
[1]	1609
	1610	!
	1611	!-- Here the FORMATs start
	1612
	1613	99 FORMAT (1X,78('-'))
[1106]	1614	100 FORMAT (/1X,'******************************',6X,42('-')/ &
	1615	1X,'* ',A,' *',6X,A/ &
	1616	1X,'******************************',6X,42('-'))
[291]	1617	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1618	37X,42('-'))
[1106]	1619	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
	1620	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1621	' Run on host: ',A10)
[1]	1622	#if defined( __parallel )
[1106]	1623	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1624	')',1X,A)
[200]	1625	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1626	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1627	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1628	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1629	37X,'because the job is running on an SMP-cluster')
[102]	1630	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1631	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1106]	1632	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
	1633	37X,42('-'))
	1634	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
	1635	37X,'independent precursor runs'/ &
	1636	37X,42('-'))
[1111]	1637	117 FORMAT (' Accelerator boards / node: ',I2)
[1]	1638	#endif
	1639	110 FORMAT (/' Numerical Schemes:'/ &
	1640	' -----------------'/)
	1641	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1642	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1643	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1644	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1645	' or Upstream')
	1646	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1647	' or Upstream')
	1648	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1649	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1650	' translation velocity = ',A/ &
[1]	1651	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
[1111]	1652	120 FORMAT (' Accelerator boards: ',8X,I2)
[1]	1653	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1654	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1655	' maximum damping coefficient: ',F5.3, ' 1/s')
	1656	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1657	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1658	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1659	F6.2, ' K assumed')
[824]	1660	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1661	' effective emissivity scheme')
[824]	1662	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1663	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1664	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1665	A,'-cycle)'/ &
	1666	' number of grid levels: ',I2/ &
	1667	' Gauss-Seidel red/black iterations: ',I2)
	1668	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1669	I3,')')
	1670	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1671	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1672	I3,')'/ &
	1673	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1674	I3,')')
	1675	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1676	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1677	140 FORMAT (' maximum residual allowed: ',E10.3)
	1678	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1679	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1680	'step')
[87]	1681	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1682	'kinetic energy')
[927]	1683	144 FORMAT (' masking method is used')
[1]	1684	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1685	'conserved'/ &
	1686	' using the ',A,' mode')
	1687	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1688	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1689	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1690	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1691	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1692	'prognostic equation for')
	1693	154 FORMAT (' the potential temperature')
[1]	1694	200 FORMAT (//' Run time and time step information:'/ &
	1695	' ----------------------------------'/)
[1106]	1696	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1]	1697	' CFL-factor: ',F4.2)
[1106]	1698	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1699	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1700	' End time: ',F9.3,' s')
[1]	1701	204 FORMAT ( A,F9.3,' s')
	1702	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
[1106]	1703	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1704	' CPU-time used: ',F9.3,' s per timestep: ', &
	1705	' ',F9.3,' s'/ &
[1111]	1706	' per second of simulated tim', &
[1]	1707	'e: ',F9.3,' s')
[1106]	1708	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
[1]	1709	250 FORMAT (//' Computational grid and domain size:'/ &
	1710	' ----------------------------------'// &
	1711	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1712	' m dz = ',F7.3,' m'/ &
	1713	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1714	' m z(u) = ',F10.3,' m'/)
	1715	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1716	' factor: ',F5.3/ &
	1717	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1718	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1719	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1720	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1721	' degrees')
	1722	270 FORMAT (//' Topography informations:'/ &
	1723	' -----------------------'// &
	1724	1X,'Topography: ',A)
	1725	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1726	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1727	' / ',I4)
[240]	1728	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1729	' direction' / &
	1730	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1731	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1732	278 FORMAT (' Topography grid definition convention:'/ &
	1733	' cell edge (staggered grid points'/ &
	1734	' (u in x-direction, v in y-direction))' /)
	1735	279 FORMAT (' Topography grid definition convention:'/ &
	1736	' cell center (scalar grid points)' /)
[138]	1737	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1738	' ------------------------------'// &
	1739	' Canopy mode: ', A / &
	1740	' Canopy top: ',I4 / &
	1741	' Leaf drag coefficient: ',F6.2 /)
[153]	1742	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1743	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1744	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1745	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1746	' Height: ',A,' m'/ &
	1747	' Leaf area density: ',A,' m2/m3'/ &
	1748	' Gradient: ',A,' m2/m4'/ &
	1749	' Gridpoint: ',A)
	1750
[1]	1751	300 FORMAT (//' Boundary conditions:'/ &
	1752	' -------------------'// &
	1753	' p uv ', &
	1754	' pt'// &
	1755	' B. bound.: ',A/ &
	1756	' T. bound.: ',A)
[97]	1757	301 FORMAT (/' ',A// &
[1]	1758	' B. bound.: ',A/ &
	1759	' T. bound.: ',A)
[19]	1760	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1761	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1762	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1763	'computational u,v-level:'// &
[978]	1764	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1765	' m kappa = ',F4.2/ &
[1]	1766	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1767	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1768	307 FORMAT (' Heatflux has a random normal distribution')
	1769	308 FORMAT (' Predefined surface temperature')
[97]	1770	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1771	310 FORMAT (//' 1D-Model:'// &
	1772	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1773	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1774	312 FORMAT (' Predefined surface humidity')
	1775	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1776	314 FORMAT (' Predefined scalar value at the surface')
[19]	1777	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1778	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1779	'atmosphere model')
[1]	1780	317 FORMAT (//' Lateral boundaries:'/ &
	1781	' left/right: ',A/ &
	1782	' north/south: ',A)
[978]	1783	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1784	'damping factor = ',F6.4)
[151]	1785	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1786	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1787	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1788	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1789	' v: ',F9.6,' m2/s2')
[151]	1790	325 FORMAT (//' List output:'/ &
[1]	1791	' -----------'// &
	1792	' 1D-Profiles:'/ &
	1793	' Output every ',F8.2,' s')
[151]	1794	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1795	' Averaging input every ',F8.2,' s')
	1796	330 FORMAT (//' Data output:'/ &
	1797	' -----------'/)
	1798	331 FORMAT (/' 1D-Profiles:')
	1799	332 FORMAT (/' ',A)
	1800	333 FORMAT (' Output every ',F8.2,' s',/ &
	1801	' Time averaged over ',F8.2,' s'/ &
	1802	' Averaging input every ',F8.2,' s')
	1803	334 FORMAT (/' 2D-Arrays',A,':')
	1804	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1805	' Output every ',F8.2,' s ',A/ &
	1806	' Cross sections at ',A1,' = ',A/ &
	1807	' scalar-coordinates: ',A,' m'/)
	1808	336 FORMAT (/' 3D-Arrays',A,':')
	1809	337 FORMAT (/' Arrays: ',A/ &
	1810	' Output every ',F8.2,' s ',A/ &
	1811	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1812	338 FORMAT (' Compressed data output'/ &
	1813	' Decimal precision: ',A/)
	1814	339 FORMAT (' No output during initial ',F8.2,' s')
	1815	340 FORMAT (/' Time series:')
	1816	341 FORMAT (' Output every ',F8.2,' s'/)
	1817	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1818	' Output every ',F8.2,' s ',A/ &
	1819	' Time averaged over ',F8.2,' s'/ &
	1820	' Averaging input every ',F8.2,' s'/ &
	1821	' Cross sections at ',A1,' = ',A/ &
	1822	' scalar-coordinates: ',A,' m'/)
	1823	343 FORMAT (/' Arrays: ',A/ &
	1824	' Output every ',F8.2,' s ',A/ &
	1825	' Time averaged over ',F8.2,' s'/ &
	1826	' Averaging input every ',F8.2,' s'/ &
	1827	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1828	344 FORMAT (' Output format: ',A/)
[410]	1829	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1830	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1831	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1832	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1833	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1834	347 FORMAT (' Variables: ',A/ &
	1835	' Output every ',F8.2,' s')
	1836	348 FORMAT (' Variables: ',A/ &
	1837	' Output every ',F8.2,' s'/ &
	1838	' Time averaged over ',F8.2,' s'/ &
	1839	' Averaging input every ',F8.2,' s')
	1840	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1841	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1842	13(' ',8(F8.2,',')/) )
	1843	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1844	'all gridpoints along ',A,'-direction (default).' )
	1845	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1846	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1847	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1848	#if defined( __dvrp_graphics )
	1849	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1850	' Output every ',F7.1,' s'/ &
	1851	' Output mode: ',A/ &
	1852	' Host / User: ',A,' / ',A/ &
	1853	' Directory: ',A// &
	1854	' The sequence contains:')
[337]	1855	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1856	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1857	362 FORMAT (/' Slicer plane ',A/ &
[336]	1858	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1859	363 FORMAT (/' Particles'/ &
[336]	1860	' particle size: ',F7.2,' m')
	1861	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1862	F6.2,',',F6.2,']')
[337]	1863	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1864	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1865	')'/ &
	1866	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1867	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1868	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1869	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1870	#endif
	1871	#if defined( __spectra )
	1872	370 FORMAT (' Spectra:')
	1873	371 FORMAT (' Output every ',F7.1,' s'/)
	1874	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1875	' Directions: ', 10(A5,',')/ &
[189]	1876	' height levels k = ', 20(I3,',')/ &
	1877	' ', 20(I3,',')/ &
	1878	' ', 20(I3,',')/ &
	1879	' ', 20(I3,',')/ &
	1880	' ', 19(I3,','),I3,'.'/ &
[1]	1881	' height levels selected for standard plot:'/ &
[189]	1882	' k = ', 20(I3,',')/ &
	1883	' ', 20(I3,',')/ &
	1884	' ', 20(I3,',')/ &
	1885	' ', 20(I3,',')/ &
	1886	' ', 19(I3,','),I3,'.'/ &
[1]	1887	' Time averaged over ', F7.1, ' s,' / &
	1888	' Profiles for the time averaging are taken every ', &
	1889	F6.1,' s')
	1890	#endif
	1891	400 FORMAT (//' Physical quantities:'/ &
	1892	' -------------------'/)
	1893	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1894	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1895	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1896	' f* = ',F9.6,' 1/s')
	1897	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1898	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1899	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1900	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1901	' ------------------------'/)
[57]	1902	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1903	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1904	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1905	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1906	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1907	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1908	' Height: ',A,' m'/ &
	1909	' Temperature: ',A,' K'/ &
	1910	' Gradient: ',A,' K/100m'/ &
	1911	' Gridpoint: ',A)
	1912	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1913	' Height: ',A,' m'/ &
	1914	' Humidity: ',A,' kg/kg'/ &
	1915	' Gradient: ',A,' (kg/kg)/100m'/ &
	1916	' Gridpoint: ',A)
	1917	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1918	' Height: ',A,' m'/ &
	1919	' Scalar concentration: ',A,' kg/m**3'/ &
	1920	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1921	' Gridpoint: ',A)
	1922	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1923	' Height: ',A,' m'/ &
	1924	' ug: ',A,' m/s'/ &
	1925	' Gradient: ',A,' 1/100s'/ &
	1926	' Gridpoint: ',A)
	1927	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1928	' Height: ',A,' m'/ &
[97]	1929	' vg: ',A,' m/s'/ &
[1]	1930	' Gradient: ',A,' 1/100s'/ &
	1931	' Gridpoint: ',A)
[97]	1932	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1933	' Height: ',A,' m'/ &
	1934	' Salinity: ',A,' psu'/ &
	1935	' Gradient: ',A,' psu/100m'/ &
	1936	' Gridpoint: ',A)
[411]	1937	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1938	' Height: ',A,' m'/ &
	1939	' w_subs: ',A,' m/s'/ &
	1940	' Gradient: ',A,' (m/s)/100m'/ &
	1941	' Gridpoint: ',A)
[767]	1942	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1943	' profiles')
[824]	1944	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1945	' ----------------------------------'/)
	1946	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1947	'on)')
	1948	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1949	' total water content is used.'/ &
	1950	' Condensation is parameterized via 0% - or 100% scheme.')
	1951	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1952	'icle model')
	1953	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1954	' droplets < 1.0E-6 m')
[825]	1955	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1956	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1957	'are used'/ &
	1958	' number of radius classes: ',I3,' interval ', &
	1959	'[1.0E-6,2.0E-4] m'/ &
	1960	' number of dissipation classes: ',I2,' interval ', &
	1961	'[0,1000] cm2/s3')
	1962	437 FORMAT (' Droplet collision is switched off')
[1]	1963	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1964	' ---------------------------'/)
[824]	1965	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1966	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1967	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1968	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1969	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1970	470 FORMAT (//' Actions during the simulation:'/ &
	1971	' -----------------------------'/)
[94]	1972	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1973	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1974	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1975	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1976	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1977	' to i/j =',I4)
	1978	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1979	1X,F5.3, ' m2/s2')
	1980	474 FORMAT (' Random number generator used : ',A/)
	1981	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1982	'respectively, if'/ &
	1983	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1984	' 3D-simulation'/)
	1985	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1986	'respectively, if the'/ &
	1987	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1988	' the 3D-simulation'/)
	1989	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1990	'respectively, if the'/ &
	1991	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1992	' the 3D-simulation'/)
	1993	480 FORMAT (' Particles:'/ &
	1994	' ---------'// &
	1995	' Particle advection is active (switched on at t = ', F7.1, &
	1996	' s)'/ &
	1997	' Start of new particle generations every ',F6.1,' s'/ &
	1998	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1999	' bottom: ', A, ' top: ', A/&
	2000	' Maximum particle age: ',F9.1,' s'/ &
[117]	2001	' Advection stopped at t = ',F9.1,' s'/ &
	2002	' Particles are sorted every ',F9.1,' s'/)
[1]	2003	481 FORMAT (' Particles have random start positions'/)
[336]	2004	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2005	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2006	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2007	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2008	' Maximum age of the end of the tail: ',F8.2,' s')
	2009	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2010	486 FORMAT (' Particle statistics are written on file'/)
	2011	487 FORMAT (' Number of particle groups: ',I2/)
	2012	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2013	' minimum timestep for advection: ', F7.5/)
	2014	489 FORMAT (' Number of particles simultaneously released at each ', &
	2015	'point: ', I5/)
	2016	490 FORMAT (' Particle group ',I2,':'/ &
	2017	' Particle radius: ',E10.3, 'm')
	2018	491 FORMAT (' Particle inertia is activated'/ &
	2019	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2020	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2021	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2022	' y:',F8.1,' - ',F8.1,' m'/&
	2023	' z:',F8.1,' - ',F8.1,' m'/&
	2024	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2025	' m dz = ',F8.1,' m'/)
	2026	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2027	F8.2,' s'/)
	2028	495 FORMAT (' Number of particles in total domain: ',I10/)
	2029	500 FORMAT (//' 1D-Model parameters:'/ &
	2030	' -------------------'// &
	2031	' Simulation time: ',F8.1,' s'/ &
	2032	' Run-controll output every: ',F8.1,' s'/ &
	2033	' Vertical profile output every: ',F8.1,' s'/ &
	2034	' Mixing length calculation: ',A/ &
	2035	' Dissipation calculation: ',A/)
	2036	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2037	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2038	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1115]	2039	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
	2040	506 FORMAT (' Drizzle parameterization via Stokes law')
	2041	507 FORMAT (' Turbulence effects on precipitation process')
	2042	508 FORMAT (' Ventilation effects on evaporation of rain drops')
	2043	509 FORMAT (' Slope limiter used for sedimentation process')
	2044	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
	2045	511 FORMAT (' Sedimentation Courant number: '/&
	2046	' C_s = ',F3.1,' ')
[1]	2047
	2048	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |