Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1113

Last change on this file since 1113 was 1112, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.1 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1112]	22	!
[941]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1112 2013-03-09 00:34:37Z raasch $
	27	!
[1112]	28	! 1111 2013-03-08 23:54:10Z raasch
	29	! output of accelerator board information
	30	! ibc_p_b = 2 removed
	31	!
[1109]	32	! 1108 2013-03-05 07:03:32Z raasch
	33	! bugfix for r1106
	34	!
[1107]	35	! 1106 2013-03-04 05:31:38Z raasch
	36	! some format changes for coupled runs
	37	!
[1093]	38	! 1092 2013-02-02 11:24:22Z raasch
	39	! unused variables removed
	40	!
[1037]	41	! 1036 2012-10-22 13:43:42Z raasch
	42	! code put under GPL (PALM 3.9)
	43	!
[1035]	44	! 1031 2012-10-19 14:35:30Z raasch
	45	! output of netCDF data format modified
	46	!
[1017]	47	! 1015 2012-09-27 09:23:24Z raasch
	48	! output of Aajustment of mixing length to the Prandtl mixing length at first
	49	! grid point above ground removed
	50	!
[1004]	51	! 1003 2012-09-14 14:35:53Z raasch
	52	! output of information about equal/unequal subdomain size removed
	53	!
[1002]	54	! 1001 2012-09-13 14:08:46Z raasch
	55	! all actions concerning leapfrog- and upstream-spline-scheme removed
	56	!
[979]	57	! 978 2012-08-09 08:28:32Z fricke
	58	! -km_damp_max, outflow_damping_width
	59	! +pt_damping_factor, pt_damping_width
	60	! +z0h
	61	!
[965]	62	! 964 2012-07-26 09:14:24Z raasch
	63	! output of profil-related quantities removed
	64	!
[941]	65	! 940 2012-07-09 14:31:00Z raasch
	66	! Output in case of simulations for pure neutral stratification (no pt-equation
	67	! solved)
	68	!
[928]	69	! 927 2012-06-06 19:15:04Z raasch
	70	! output of masking_method for mg-solver
	71	!
[869]	72	! 868 2012-03-28 12:21:07Z raasch
	73	! translation velocity in Galilean transformation changed to 0.6 * ug
	74	!
[834]	75	! 833 2012-02-22 08:55:55Z maronga
	76	! Adjusted format for leaf area density
	77	!
[829]	78	! 828 2012-02-21 12:00:36Z raasch
	79	! output of dissipation_classes + radius_classes
	80	!
[826]	81	! 825 2012-02-19 03:03:44Z raasch
	82	! Output of cloud physics parameters/quantities complemented and restructured
	83	!
[768]	84	! 767 2011-10-14 06:39:12Z raasch
	85	! Output of given initial u,v-profiles
	86	!
[760]	87	! 759 2011-09-15 13:58:31Z raasch
	88	! output of maximum number of parallel io streams
	89	!
[708]	90	! 707 2011-03-29 11:39:40Z raasch
	91	! bc_lr/ns replaced by bc_lr/ns_cyc
	92	!
[668]	93	! 667 2010-12-23 12:06:00Z suehring/gryschka
	94	! Output of advection scheme.
	95	! Modified output of Prandtl-layer height.
	96	!
[581]	97	! 580 2010-10-05 13:59:11Z heinze
	98	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	99	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	100	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	101	!
[494]	102	! 493 2010-03-01 08:30:24Z raasch
	103	! NetCDF data output format extendend for NetCDF4/HDF5
	104	!
[482]	105	! 449 2010-02-02 11:23:59Z raasch
	106	! +large scale vertical motion (subsidence/ascent)
	107	! Bugfix: index problem concerning gradient_level indices removed
	108	!
[449]	109	! 410 2009-12-04 17:05:40Z letzel
	110	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	111	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	112	!
[392]	113	! 346 2009-07-06 10:13:41Z raasch
[328]	114	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	115	! Coupling with independent precursor runs.
[254]	116	! Output of messages replaced by message handling routine.
[336]	117	! Output of several additional dvr parameters
[240]	118	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	119	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	120	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	121	! topography_grid_convention moved from user_header
[292]	122	! small bugfix concerning 3d 64bit netcdf output format
[1]	123	!
[226]	124	! 206 2008-10-13 14:59:11Z raasch
	125	! Bugfix: error in zu index in case of section_xy = -1
	126	!
[200]	127	! 198 2008-09-17 08:55:28Z raasch
	128	! Format adjustments allowing output of larger revision numbers
	129	!
[198]	130	! 197 2008-09-16 15:29:03Z raasch
	131	! allow 100 spectra levels instead of 10 for consistency with
	132	! define_netcdf_header,
	133	! bugfix in the output of the characteristic levels of potential temperature,
	134	! geostrophic wind, scalar concentration, humidity and leaf area density,
	135	! output of turbulence recycling informations
	136	!
[139]	137	! 138 2007-11-28 10:03:58Z letzel
	138	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	139	! Allow two instead of one digit to specify isosurface and slicer variables.
	140	! Output of sorting frequency of particles
	141	!
[110]	142	! 108 2007-08-24 15:10:38Z letzel
	143	! Output of informations for coupled model runs (boundary conditions etc.)
	144	! + output of momentumfluxes at the top boundary
	145	! Rayleigh damping for ocean, e_init
	146	!
[98]	147	! 97 2007-06-21 08:23:15Z raasch
	148	! Adjustments for the ocean version.
	149	! use_pt_reference renamed use_reference
	150	!
[90]	151	! 87 2007-05-22 15:46:47Z raasch
	152	! Bugfix: output of use_upstream_for_tke
	153	!
[83]	154	! 82 2007-04-16 15:40:52Z raasch
	155	! Preprocessor strings for different linux clusters changed to "lc",
	156	! routine local_flush is used for buffer flushing
	157	!
[77]	158	! 76 2007-03-29 00:58:32Z raasch
	159	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	160	! output of the loop optimization method, moisture renamed humidity,
	161	! output of subversion revision number
	162	!
[39]	163	! 19 2007-02-23 04:53:48Z raasch
	164	! Output of scalar flux applied at top boundary
	165	!
[3]	166	! RCS Log replace by Id keyword, revision history cleaned up
	167	!
[1]	168	! Revision 1.63 2006/08/22 13:53:13 raasch
	169	! Output of dz_max
	170	!
	171	! Revision 1.1 1997/08/11 06:17:20 raasch
	172	! Initial revision
	173	!
	174	!
	175	! Description:
	176	! ------------
	177	! Writing a header with all important informations about the actual run.
	178	! This subroutine is called three times, two times at the beginning
	179	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	180	! end of the run, then writing additional information about CPU-usage on file
	181	! header.
[411]	182	!-----------------------------------------------------------------------------!
[1]	183
	184	USE arrays_3d
	185	USE control_parameters
	186	USE cloud_parameters
	187	USE cpulog
	188	USE dvrp_variables
	189	USE grid_variables
	190	USE indices
	191	USE model_1d
	192	USE particle_attributes
	193	USE pegrid
[411]	194	USE subsidence_mod
[1]	195	USE spectrum
	196
	197	IMPLICIT NONE
	198
	199	CHARACTER (LEN=1) :: prec
	200	CHARACTER (LEN=2) :: do2d_mode
	201	CHARACTER (LEN=5) :: section_chr
	202	CHARACTER (LEN=10) :: coor_chr, host_chr
	203	CHARACTER (LEN=16) :: begin_chr
[1106]	204	CHARACTER (LEN=26) :: ver_rev
[1]	205	CHARACTER (LEN=40) :: output_format
[167]	206	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	207	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	208	domask_chr, run_classification
[167]	209	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	210	temperatures, ugcomponent, vgcomponent
[1]	211	CHARACTER (LEN=85) :: roben, runten
	212
[410]	213	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	214
	215	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	216	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	217	REAL :: cpuseconds_per_simulated_second
	218
	219	!
	220	!-- Open the output file. At the end of the simulation, output is directed
	221	!-- to unit 19.
	222	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	223	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	224	io = 15 ! header output on file RUN_CONTROL
	225	ELSE
	226	io = 19 ! header output on file HEADER
	227	ENDIF
	228	CALL check_open( io )
	229
	230	!
	231	!-- At the end of the run, output file (HEADER) will be rewritten with
	232	!-- new informations
	233	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	234
	235	!
	236	!-- Determine kind of model run
	237	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	238	run_classification = '3D - restart run'
[328]	239	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	240	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	241	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	242	run_classification = '3D - run without 1D - prerun'
[197]	243	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	244	run_classification = '3D - run with 1D - prerun'
[197]	245	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	246	run_classification = '3D - run initialized by user'
[1]	247	ELSE
[254]	248	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	249	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	250	ENDIF
[97]	251	IF ( ocean ) THEN
	252	run_classification = 'ocean - ' // run_classification
	253	ELSE
	254	run_classification = 'atmosphere - ' // run_classification
	255	ENDIF
[1]	256
	257	!
	258	!-- Run-identification, date, time, host
	259	host_chr = host(1:10)
[75]	260	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	261	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	262	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	263	#if defined( __mpi2 )
	264	mpi_type = 2
	265	#else
	266	mpi_type = 1
	267	#endif
	268	WRITE ( io, 101 ) mpi_type, coupling_mode
	269	ENDIF
[1108]	270	#if defined( __parallel )
[1106]	271	IF ( coupling_start_time /= 0.0 ) THEN
	272	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	273	WRITE ( io, 109 )
	274	ELSE
	275	WRITE ( io, 114 )
	276	ENDIF
	277	ENDIF
[1108]	278	#endif
[102]	279	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	280	ADJUSTR( host_chr )
[1]	281	#if defined( __parallel )
	282	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	283	char1 = 'calculated'
	284	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	285	host(1:2) == 'lc' ) .AND. &
	286	npex == -1 .AND. pdims(2) == 1 ) THEN
	287	char1 = 'forced'
	288	ELSE
	289	char1 = 'predefined'
	290	ENDIF
	291	IF ( threads_per_task == 1 ) THEN
[102]	292	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	293	ELSE
[102]	294	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	295	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	296	ENDIF
[1111]	297	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
[1]	298	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	299	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	300	npex == -1 .AND. pdims(2) == 1 ) &
	301	THEN
[102]	302	WRITE ( io, 106 )
[1]	303	ELSEIF ( pdims(2) == 1 ) THEN
[102]	304	WRITE ( io, 107 ) 'x'
[1]	305	ELSEIF ( pdims(1) == 1 ) THEN
[102]	306	WRITE ( io, 107 ) 'y'
[1]	307	ENDIF
[102]	308	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	309	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	310	WRITE ( io, 108 ) maximum_parallel_io_streams
	311	ENDIF
[1111]	312	#else
	313	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
[1]	314	#endif
	315	WRITE ( io, 99 )
	316
	317	!
	318	!-- Numerical schemes
	319	WRITE ( io, 110 )
	320	IF ( psolver(1:7) == 'poisfft' ) THEN
	321	WRITE ( io, 111 ) TRIM( fft_method )
	322	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	323	ELSEIF ( psolver == 'sor' ) THEN
	324	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	325	ELSEIF ( psolver == 'multigrid' ) THEN
	326	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	327	IF ( mg_cycles == -1 ) THEN
	328	WRITE ( io, 140 ) residual_limit
	329	ELSE
	330	WRITE ( io, 141 ) mg_cycles
	331	ENDIF
	332	IF ( mg_switch_to_pe0_level == 0 ) THEN
	333	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	334	nzt_mg(1)
[197]	335	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	336	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	337	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	338	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	339	nzt_mg(mg_switch_to_pe0_level), &
	340	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	341	nzt_mg(1)
	342	ENDIF
[927]	343	IF ( masking_method ) WRITE ( io, 144 )
[1]	344	ENDIF
	345	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	346	THEN
	347	WRITE ( io, 142 )
	348	ENDIF
	349
	350	IF ( momentum_advec == 'pw-scheme' ) THEN
	351	WRITE ( io, 113 )
[667]	352	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	353	WRITE ( io, 503 )
[1]	354	ENDIF
	355	IF ( scalar_advec == 'pw-scheme' ) THEN
	356	WRITE ( io, 116 )
[667]	357	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	358	WRITE ( io, 504 )
[1]	359	ELSE
	360	WRITE ( io, 118 )
	361	ENDIF
[63]	362
	363	WRITE ( io, 139 ) TRIM( loop_optimization )
	364
[1]	365	IF ( galilei_transformation ) THEN
	366	IF ( use_ug_for_galilei_tr ) THEN
[868]	367	char1 = '0.6 * geostrophic wind'
[1]	368	ELSE
	369	char1 = 'mean wind in model domain'
	370	ENDIF
	371	IF ( simulated_time_at_begin == simulated_time ) THEN
	372	char2 = 'at the start of the run'
	373	ELSE
	374	char2 = 'at the end of the run'
	375	ENDIF
	376	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	377	advected_distance_x/1000.0, advected_distance_y/1000.0
	378	ENDIF
[1001]	379	WRITE ( io, 122 ) timestep_scheme
[87]	380	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	381	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	382	IF ( .NOT. ocean ) THEN
	383	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	384	rayleigh_damping_factor
	385	ELSE
	386	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	387	rayleigh_damping_factor
	388	ENDIF
[1]	389	ENDIF
[940]	390	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	391	IF ( humidity ) THEN
[1]	392	IF ( .NOT. cloud_physics ) THEN
	393	WRITE ( io, 129 )
	394	ELSE
	395	WRITE ( io, 130 )
	396	ENDIF
	397	ENDIF
	398	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	399	IF ( conserve_volume_flow ) THEN
[241]	400	WRITE ( io, 150 ) conserve_volume_flow_mode
	401	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	402	WRITE ( io, 151 ) u_bulk, v_bulk
	403	ENDIF
[240]	404	ELSEIF ( dp_external ) THEN
	405	IF ( dp_smooth ) THEN
[241]	406	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	407	ELSE
[241]	408	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	409	ENDIF
	410	ENDIF
[411]	411	IF ( large_scale_subsidence ) THEN
	412	WRITE ( io, 153 )
	413	WRITE ( io, 154 )
	414	ENDIF
[1]	415	WRITE ( io, 99 )
	416
	417	!
	418	!-- Runtime and timestep informations
	419	WRITE ( io, 200 )
	420	IF ( .NOT. dt_fixed ) THEN
	421	WRITE ( io, 201 ) dt_max, cfl_factor
	422	ELSE
	423	WRITE ( io, 202 ) dt
	424	ENDIF
	425	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	426
	427	IF ( time_restart /= 9999999.9 .AND. &
	428	simulated_time_at_begin == simulated_time ) THEN
	429	IF ( dt_restart == 9999999.9 ) THEN
	430	WRITE ( io, 204 ) ' Restart at: ',time_restart
	431	ELSE
	432	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	433	ENDIF
	434	ENDIF
	435
	436	IF ( simulated_time_at_begin /= simulated_time ) THEN
	437	i = MAX ( log_point_s(10)%counts, 1 )
	438	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	439	cpuseconds_per_simulated_second = 0.0
	440	ELSE
	441	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	442	( simulated_time - &
	443	simulated_time_at_begin )
	444	ENDIF
	445	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	446	log_point_s(10)%sum / REAL( i ), &
	447	cpuseconds_per_simulated_second
	448	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	449	IF ( dt_restart == 9999999.9 ) THEN
[1106]	450	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	451	ELSE
[1106]	452	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	453	ENDIF
	454	ENDIF
	455	ENDIF
	456
	457	!
[291]	458	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	459	!-- and ocean are used or have been used. In this case, coupling_start_time
	460	!-- defines the time when the coupling is switched on.
[291]	461	IF ( coupling_start_time /= 0.0 ) THEN
[1106]	462	WRITE ( io, 207 ) coupling_start_time
[291]	463	ENDIF
	464
	465	!
[1]	466	!-- Computational grid
[94]	467	IF ( .NOT. ocean ) THEN
	468	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	469	IF ( dz_stretch_level_index < nzt+1 ) THEN
	470	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	471	dz_stretch_factor, dz_max
	472	ENDIF
	473	ELSE
	474	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	475	IF ( dz_stretch_level_index > 0 ) THEN
	476	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	477	dz_stretch_factor, dz_max
	478	ENDIF
[1]	479	ENDIF
	480	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	481	MIN( nnz+2, nzt+2 )
	482	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	483
	484	!
	485	!-- Topography
	486	WRITE ( io, 270 ) topography
	487	SELECT CASE ( TRIM( topography ) )
	488
	489	CASE ( 'flat' )
	490	! no actions necessary
	491
	492	CASE ( 'single_building' )
	493	blx = INT( building_length_x / dx )
	494	bly = INT( building_length_y / dy )
	495	bh = INT( building_height / dz )
	496
	497	IF ( building_wall_left == 9999999.9 ) THEN
	498	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	499	ENDIF
	500	bxl = INT ( building_wall_left / dx + 0.5 )
	501	bxr = bxl + blx
	502
	503	IF ( building_wall_south == 9999999.9 ) THEN
	504	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	505	ENDIF
	506	bys = INT ( building_wall_south / dy + 0.5 )
	507	byn = bys + bly
	508
	509	WRITE ( io, 271 ) building_length_x, building_length_y, &
	510	building_height, bxl, bxr, bys, byn
	511
[240]	512	CASE ( 'single_street_canyon' )
	513	ch = NINT( canyon_height / dz )
	514	IF ( canyon_width_x /= 9999999.9 ) THEN
	515	!
	516	!-- Street canyon in y direction
	517	cwx = NINT( canyon_width_x / dx )
	518	IF ( canyon_wall_left == 9999999.9 ) THEN
	519	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	520	ENDIF
	521	cxl = NINT( canyon_wall_left / dx )
	522	cxr = cxl + cwx
	523	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	524
	525	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	526	!
	527	!-- Street canyon in x direction
	528	cwy = NINT( canyon_width_y / dy )
	529	IF ( canyon_wall_south == 9999999.9 ) THEN
	530	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	531	ENDIF
	532	cys = NINT( canyon_wall_south / dy )
	533	cyn = cys + cwy
	534	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	535	ENDIF
	536
[1]	537	END SELECT
	538
[256]	539	IF ( TRIM( topography ) /= 'flat' ) THEN
	540	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	541	IF ( TRIM( topography ) == 'single_building' .OR. &
	542	TRIM( topography ) == 'single_street_canyon' ) THEN
	543	WRITE ( io, 278 )
	544	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	545	WRITE ( io, 279 )
	546	ENDIF
	547	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	548	WRITE ( io, 278 )
	549	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	550	WRITE ( io, 279 )
	551	ENDIF
	552	ENDIF
	553
[138]	554	IF ( plant_canopy ) THEN
	555
	556	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	557	IF ( passive_scalar ) THEN
	558	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	559	leaf_surface_concentration
	560	ENDIF
[138]	561
[1]	562	!
[153]	563	!-- Heat flux at the top of vegetation
	564	WRITE ( io, 282 ) cthf
	565
	566	!
[138]	567	!-- Leaf area density profile
	568	!-- Building output strings, starting with surface value
[833]	569	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	570	gradients = '------'
	571	slices = ' 0'
	572	coordinates = ' 0.0'
	573	i = 1
	574	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	575
	576	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	577	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	578
	579	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	580	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	581
	582	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	583	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	584
	585	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	586	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	587
	588	i = i + 1
	589	ENDDO
	590
[153]	591	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	592	TRIM( gradients ), TRIM( slices )
	593
	594	ENDIF
	595
	596	!
[1]	597	!-- Boundary conditions
	598	IF ( ibc_p_b == 0 ) THEN
	599	runten = 'p(0) = 0 \|'
	600	ELSEIF ( ibc_p_b == 1 ) THEN
	601	runten = 'p(0) = p(1) \|'
	602	ENDIF
	603	IF ( ibc_p_t == 0 ) THEN
	604	roben = 'p(nzt+1) = 0 \|'
	605	ELSE
	606	roben = 'p(nzt+1) = p(nzt) \|'
	607	ENDIF
	608
	609	IF ( ibc_uv_b == 0 ) THEN
	610	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	611	ELSE
	612	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	613	ENDIF
[132]	614	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	615	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	616	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	617	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	618	ELSE
	619	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	620	ENDIF
	621
	622	IF ( ibc_pt_b == 0 ) THEN
	623	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	624	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	625	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	626	ELSEIF ( ibc_pt_b == 2 ) THEN
	627	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	628	ENDIF
	629	IF ( ibc_pt_t == 0 ) THEN
[19]	630	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	631	ELSEIF( ibc_pt_t == 1 ) THEN
	632	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	633	ELSEIF( ibc_pt_t == 2 ) THEN
	634	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	635
[1]	636	ENDIF
	637
	638	WRITE ( io, 300 ) runten, roben
	639
	640	IF ( .NOT. constant_diffusion ) THEN
	641	IF ( ibc_e_b == 1 ) THEN
	642	runten = 'e(0) = e(1)'
	643	ELSE
	644	runten = 'e(0) = e(1) = (u/0.1)*2'
	645	ENDIF
	646	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	647
[97]	648	WRITE ( io, 301 ) 'e', runten, roben
[1]	649
	650	ENDIF
	651
[97]	652	IF ( ocean ) THEN
	653	runten = 'sa(0) = sa(1)'
	654	IF ( ibc_sa_t == 0 ) THEN
	655	roben = 'sa(nzt+1) = sa_surface'
[1]	656	ELSE
[97]	657	roben = 'sa(nzt+1) = sa(nzt)'
[1]	658	ENDIF
[97]	659	WRITE ( io, 301 ) 'sa', runten, roben
	660	ENDIF
[1]	661
[97]	662	IF ( humidity ) THEN
	663	IF ( ibc_q_b == 0 ) THEN
	664	runten = 'q(0) = q_surface'
	665	ELSE
	666	runten = 'q(0) = q(1)'
	667	ENDIF
	668	IF ( ibc_q_t == 0 ) THEN
	669	roben = 'q(nzt) = q_top'
	670	ELSE
	671	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	672	ENDIF
	673	WRITE ( io, 301 ) 'q', runten, roben
	674	ENDIF
[1]	675
[97]	676	IF ( passive_scalar ) THEN
	677	IF ( ibc_q_b == 0 ) THEN
	678	runten = 's(0) = s_surface'
	679	ELSE
	680	runten = 's(0) = s(1)'
	681	ENDIF
	682	IF ( ibc_q_t == 0 ) THEN
	683	roben = 's(nzt) = s_top'
	684	ELSE
	685	roben = 's(nzt) = s(nzt-1) + ds/dz'
	686	ENDIF
	687	WRITE ( io, 301 ) 's', runten, roben
[1]	688	ENDIF
	689
	690	IF ( use_surface_fluxes ) THEN
	691	WRITE ( io, 303 )
	692	IF ( constant_heatflux ) THEN
	693	WRITE ( io, 306 ) surface_heatflux
	694	IF ( random_heatflux ) WRITE ( io, 307 )
	695	ENDIF
[75]	696	IF ( humidity .AND. constant_waterflux ) THEN
[1]	697	WRITE ( io, 311 ) surface_waterflux
	698	ENDIF
	699	IF ( passive_scalar .AND. constant_waterflux ) THEN
	700	WRITE ( io, 313 ) surface_waterflux
	701	ENDIF
	702	ENDIF
	703
[19]	704	IF ( use_top_fluxes ) THEN
	705	WRITE ( io, 304 )
[102]	706	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	707	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	708	IF ( constant_top_heatflux ) THEN
	709	WRITE ( io, 306 ) top_heatflux
	710	ENDIF
	711	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	712	WRITE ( io, 316 )
[19]	713	ENDIF
[97]	714	IF ( ocean .AND. constant_top_salinityflux ) THEN
	715	WRITE ( io, 309 ) top_salinityflux
	716	ENDIF
[75]	717	IF ( humidity .OR. passive_scalar ) THEN
[19]	718	WRITE ( io, 315 )
	719	ENDIF
	720	ENDIF
	721
[1]	722	IF ( prandtl_layer ) THEN
[978]	723	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	724	z0h_factor*roughness_length, kappa, &
[94]	725	rif_min, rif_max
[1]	726	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	727	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	728	WRITE ( io, 312 )
	729	ENDIF
	730	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	731	WRITE ( io, 314 )
	732	ENDIF
	733	ELSE
	734	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	735	WRITE ( io, 310 ) rif_min, rif_max
	736	ENDIF
	737	ENDIF
	738
	739	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	740	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	741	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	742	IF ( turbulent_inflow ) THEN
	743	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	744	inflow_damping_height, inflow_damping_width
	745	ENDIF
[1]	746	ENDIF
	747
	748	!
	749	!-- Listing of 1D-profiles
[151]	750	WRITE ( io, 325 ) dt_dopr_listing
[1]	751	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	752	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	753	ENDIF
	754
	755	!
	756	!-- DATA output
	757	WRITE ( io, 330 )
	758	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	759	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	760	ENDIF
	761
	762	!
	763	!-- 1D-profiles
[346]	764	dopr_chr = 'Profile:'
[1]	765	IF ( dopr_n /= 0 ) THEN
	766	WRITE ( io, 331 )
	767
	768	output_format = ''
	769	IF ( netcdf_output ) THEN
[1031]	770	output_format = output_format_netcdf
[1]	771	ENDIF
[292]	772	WRITE ( io, 344 ) output_format
[1]	773
	774	DO i = 1, dopr_n
	775	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	776	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	777	WRITE ( io, 332 ) dopr_chr
	778	dopr_chr = ' :'
	779	ENDIF
	780	ENDDO
	781
	782	IF ( dopr_chr /= '' ) THEN
	783	WRITE ( io, 332 ) dopr_chr
	784	ENDIF
	785	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	786	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	787	ENDIF
	788
	789	!
	790	!-- 2D-arrays
	791	DO av = 0, 1
	792
	793	i = 1
	794	do2d_xy = ''
	795	do2d_xz = ''
	796	do2d_yz = ''
	797	DO WHILE ( do2d(av,i) /= ' ' )
	798
	799	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	800	do2d_mode = do2d(av,i)(l-1:l)
	801
	802	SELECT CASE ( do2d_mode )
	803	CASE ( 'xy' )
	804	ll = LEN_TRIM( do2d_xy )
	805	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	806	CASE ( 'xz' )
	807	ll = LEN_TRIM( do2d_xz )
	808	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	809	CASE ( 'yz' )
	810	ll = LEN_TRIM( do2d_yz )
	811	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	812	END SELECT
	813
	814	i = i + 1
	815
	816	ENDDO
	817
	818	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	819	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	820	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	821	( netcdf_output .OR. iso2d_output ) ) THEN
	822
	823	IF ( av == 0 ) THEN
	824	WRITE ( io, 334 ) ''
	825	ELSE
	826	WRITE ( io, 334 ) '(time-averaged)'
	827	ENDIF
	828
	829	IF ( do2d_at_begin ) THEN
	830	begin_chr = 'and at the start'
	831	ELSE
	832	begin_chr = ''
	833	ENDIF
	834
	835	output_format = ''
	836	IF ( netcdf_output ) THEN
[1031]	837	output_format = output_format_netcdf
[1]	838	ENDIF
	839	IF ( iso2d_output ) THEN
	840	IF ( netcdf_output ) THEN
[1031]	841	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	842	ELSE
	843	output_format = 'iso2d'
	844	ENDIF
	845	ENDIF
[292]	846	WRITE ( io, 344 ) output_format
[1]	847
	848	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	849	i = 1
	850	slices = '/'
	851	coordinates = '/'
	852	!
	853	!-- Building strings with index and coordinate informations of the
	854	!-- slices
	855	DO WHILE ( section(i,1) /= -9999 )
	856
	857	WRITE (section_chr,'(I5)') section(i,1)
	858	section_chr = ADJUSTL( section_chr )
	859	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	860
[206]	861	IF ( section(i,1) == -1 ) THEN
	862	WRITE (coor_chr,'(F10.1)') -1.0
	863	ELSE
	864	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	865	ENDIF
[1]	866	coor_chr = ADJUSTL( coor_chr )
	867	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	868
	869	i = i + 1
	870	ENDDO
	871	IF ( av == 0 ) THEN
	872	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	873	TRIM( begin_chr ), 'k', TRIM( slices ), &
	874	TRIM( coordinates )
	875	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	876	WRITE ( io, 339 ) skip_time_do2d_xy
	877	ENDIF
	878	ELSE
	879	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	880	TRIM( begin_chr ), averaging_interval, &
	881	dt_averaging_input, 'k', TRIM( slices ), &
	882	TRIM( coordinates )
	883	IF ( skip_time_data_output_av /= 0.0 ) THEN
	884	WRITE ( io, 339 ) skip_time_data_output_av
	885	ENDIF
	886	ENDIF
	887
	888	ENDIF
	889
	890	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	891	i = 1
	892	slices = '/'
	893	coordinates = '/'
	894	!
	895	!-- Building strings with index and coordinate informations of the
	896	!-- slices
	897	DO WHILE ( section(i,2) /= -9999 )
	898
	899	WRITE (section_chr,'(I5)') section(i,2)
	900	section_chr = ADJUSTL( section_chr )
	901	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	902
	903	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	904	coor_chr = ADJUSTL( coor_chr )
	905	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	906
	907	i = i + 1
	908	ENDDO
	909	IF ( av == 0 ) THEN
	910	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	911	TRIM( begin_chr ), 'j', TRIM( slices ), &
	912	TRIM( coordinates )
	913	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	914	WRITE ( io, 339 ) skip_time_do2d_xz
	915	ENDIF
	916	ELSE
	917	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	918	TRIM( begin_chr ), averaging_interval, &
	919	dt_averaging_input, 'j', TRIM( slices ), &
	920	TRIM( coordinates )
	921	IF ( skip_time_data_output_av /= 0.0 ) THEN
	922	WRITE ( io, 339 ) skip_time_data_output_av
	923	ENDIF
	924	ENDIF
	925	ENDIF
	926
	927	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	928	i = 1
	929	slices = '/'
	930	coordinates = '/'
	931	!
	932	!-- Building strings with index and coordinate informations of the
	933	!-- slices
	934	DO WHILE ( section(i,3) /= -9999 )
	935
	936	WRITE (section_chr,'(I5)') section(i,3)
	937	section_chr = ADJUSTL( section_chr )
	938	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	939
	940	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	941	coor_chr = ADJUSTL( coor_chr )
	942	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	943
	944	i = i + 1
	945	ENDDO
	946	IF ( av == 0 ) THEN
	947	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	948	TRIM( begin_chr ), 'i', TRIM( slices ), &
	949	TRIM( coordinates )
	950	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	951	WRITE ( io, 339 ) skip_time_do2d_yz
	952	ENDIF
	953	ELSE
	954	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	955	TRIM( begin_chr ), averaging_interval, &
	956	dt_averaging_input, 'i', TRIM( slices ), &
	957	TRIM( coordinates )
	958	IF ( skip_time_data_output_av /= 0.0 ) THEN
	959	WRITE ( io, 339 ) skip_time_data_output_av
	960	ENDIF
	961	ENDIF
	962	ENDIF
	963
	964	ENDIF
	965
	966	ENDDO
	967
	968	!
	969	!-- 3d-arrays
	970	DO av = 0, 1
	971
	972	i = 1
	973	do3d_chr = ''
	974	DO WHILE ( do3d(av,i) /= ' ' )
	975
	976	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	977	i = i + 1
	978
	979	ENDDO
	980
	981	IF ( do3d_chr /= '' ) THEN
	982	IF ( av == 0 ) THEN
	983	WRITE ( io, 336 ) ''
	984	ELSE
	985	WRITE ( io, 336 ) '(time-averaged)'
	986	ENDIF
	987
	988	output_format = ''
	989	IF ( netcdf_output ) THEN
[1031]	990	output_format = output_format_netcdf
[1]	991	ENDIF
	992	IF ( avs_output ) THEN
	993	IF ( netcdf_output ) THEN
[1031]	994	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	995	ELSE
	996	output_format = 'avs'
	997	ENDIF
	998	ENDIF
[292]	999	WRITE ( io, 344 ) output_format
[1]	1000
	1001	IF ( do3d_at_begin ) THEN
	1002	begin_chr = 'and at the start'
	1003	ELSE
	1004	begin_chr = ''
	1005	ENDIF
	1006	IF ( av == 0 ) THEN
	1007	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1008	zu(nz_do3d), nz_do3d
	1009	ELSE
	1010	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1011	TRIM( begin_chr ), averaging_interval, &
	1012	dt_averaging_input, zu(nz_do3d), nz_do3d
	1013	ENDIF
	1014
	1015	IF ( do3d_compress ) THEN
	1016	do3d_chr = ''
	1017	i = 1
	1018	DO WHILE ( do3d(av,i) /= ' ' )
	1019
	1020	SELECT CASE ( do3d(av,i) )
	1021	CASE ( 'u' )
	1022	j = 1
	1023	CASE ( 'v' )
	1024	j = 2
	1025	CASE ( 'w' )
	1026	j = 3
	1027	CASE ( 'p' )
	1028	j = 4
	1029	CASE ( 'pt' )
	1030	j = 5
	1031	END SELECT
	1032	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1033	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1034	':' // prec // ','
	1035	i = i + 1
	1036
	1037	ENDDO
	1038	WRITE ( io, 338 ) do3d_chr
	1039
	1040	ENDIF
	1041
	1042	IF ( av == 0 ) THEN
	1043	IF ( skip_time_do3d /= 0.0 ) THEN
	1044	WRITE ( io, 339 ) skip_time_do3d
	1045	ENDIF
	1046	ELSE
	1047	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1048	WRITE ( io, 339 ) skip_time_data_output_av
	1049	ENDIF
	1050	ENDIF
	1051
	1052	ENDIF
	1053
	1054	ENDDO
	1055
	1056	!
[410]	1057	!-- masked arrays
	1058	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1059	mask_scale_x, mask_scale_y, mask_scale_z
	1060	DO mid = 1, masks
	1061	DO av = 0, 1
	1062
	1063	i = 1
	1064	domask_chr = ''
	1065	DO WHILE ( domask(mid,av,i) /= ' ' )
	1066	domask_chr = TRIM( domask_chr ) // ' ' // &
	1067	TRIM( domask(mid,av,i) ) // ','
	1068	i = i + 1
	1069	ENDDO
	1070
	1071	IF ( domask_chr /= '' ) THEN
	1072	IF ( av == 0 ) THEN
	1073	WRITE ( io, 346 ) '', mid
	1074	ELSE
	1075	WRITE ( io, 346 ) ' (time-averaged)', mid
	1076	ENDIF
	1077
[1031]	1078	output_format = ' '
[410]	1079	IF ( netcdf_output ) THEN
[1031]	1080	output_format = output_format_netcdf
[410]	1081	ENDIF
	1082	WRITE ( io, 344 ) output_format
	1083
	1084	IF ( av == 0 ) THEN
	1085	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1086	ELSE
	1087	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1088	averaging_interval, dt_averaging_input
	1089	ENDIF
	1090
	1091	IF ( av == 0 ) THEN
	1092	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1093	WRITE ( io, 339 ) skip_time_domask(mid)
	1094	ENDIF
	1095	ELSE
	1096	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1097	WRITE ( io, 339 ) skip_time_data_output_av
	1098	ENDIF
	1099	ENDIF
	1100	!
	1101	!-- output locations
	1102	DO dim = 1, 3
	1103	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1104	count = 0
	1105	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1106	count = count + 1
	1107	ENDDO
	1108	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1109	mask(mid,dim,:count)
	1110	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1111	mask_loop(mid,dim,2) < 0.0 .AND. &
	1112	mask_loop(mid,dim,3) == 0.0 ) THEN
	1113	WRITE ( io, 350 ) dir(dim), dir(dim)
	1114	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1115	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1116	mask_loop(mid,dim,1:2)
	1117	ELSE
	1118	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1119	mask_loop(mid,dim,1:3)
	1120	ENDIF
	1121	ENDDO
	1122	ENDIF
	1123
	1124	ENDDO
	1125	ENDDO
	1126
	1127	!
[1]	1128	!-- Timeseries
	1129	IF ( dt_dots /= 9999999.9 ) THEN
	1130	WRITE ( io, 340 )
	1131
	1132	output_format = ''
	1133	IF ( netcdf_output ) THEN
[1031]	1134	output_format = output_format_netcdf
[1]	1135	ENDIF
[292]	1136	WRITE ( io, 344 ) output_format
[1]	1137	WRITE ( io, 341 ) dt_dots
	1138	ENDIF
	1139
	1140	#if defined( __dvrp_graphics )
	1141	!
	1142	!-- Dvrp-output
	1143	IF ( dt_dvrp /= 9999999.9 ) THEN
	1144	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1145	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1146	i = 1
	1147	l = 0
[336]	1148	m = 0
[1]	1149	DO WHILE ( mode_dvrp(i) /= ' ' )
	1150	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1151	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1152	l = l + 1
	1153	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1154	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1155	isosurface_color(:,l)
[1]	1156	ENDIF
	1157	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1158	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1159	m = m + 1
	1160	IF ( do2d(0,j) /= ' ' ) THEN
	1161	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1162	slicer_range_limits_dvrp(:,m)
	1163	ENDIF
[1]	1164	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1165	WRITE ( io, 363 ) dvrp_psize
	1166	IF ( particle_dvrpsize /= 'none' ) THEN
	1167	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1168	dvrpsize_interval
	1169	ENDIF
	1170	IF ( particle_color /= 'none' ) THEN
	1171	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1172	color_interval
	1173	ENDIF
[1]	1174	ENDIF
	1175	i = i + 1
	1176	ENDDO
[237]	1177
[336]	1178	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1179	superelevation_y, superelevation, clip_dvrp_l, &
	1180	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1181
	1182	IF ( TRIM( topography ) /= 'flat' ) THEN
	1183	WRITE ( io, 366 ) topography_color
	1184	IF ( cluster_size > 1 ) THEN
	1185	WRITE ( io, 367 ) cluster_size
	1186	ENDIF
[237]	1187	ENDIF
	1188
[1]	1189	ENDIF
	1190	#endif
	1191
	1192	#if defined( __spectra )
	1193	!
	1194	!-- Spectra output
	1195	IF ( dt_dosp /= 9999999.9 ) THEN
	1196	WRITE ( io, 370 )
	1197
[1031]	1198	output_format = ' '
[1]	1199	IF ( netcdf_output ) THEN
[1031]	1200	output_format = output_format_netcdf
[1]	1201	ENDIF
[292]	1202	WRITE ( io, 344 ) output_format
[1]	1203	WRITE ( io, 371 ) dt_dosp
	1204	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1205	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1206	( spectra_direction(i), i = 1,10 ), &
[189]	1207	( comp_spectra_level(i), i = 1,100 ), &
	1208	( plot_spectra_level(i), i = 1,100 ), &
[1]	1209	averaging_interval_sp, dt_averaging_input_pr
	1210	ENDIF
	1211	#endif
	1212
	1213	WRITE ( io, 99 )
	1214
	1215	!
	1216	!-- Physical quantities
	1217	WRITE ( io, 400 )
	1218
	1219	!
	1220	!-- Geostrophic parameters
	1221	WRITE ( io, 410 ) omega, phi, f, fs
	1222
	1223	!
	1224	!-- Other quantities
	1225	WRITE ( io, 411 ) g
[97]	1226	IF ( use_reference ) THEN
	1227	IF ( ocean ) THEN
	1228	WRITE ( io, 412 ) prho_reference
	1229	ELSE
	1230	WRITE ( io, 413 ) pt_reference
	1231	ENDIF
	1232	ENDIF
[1]	1233
	1234	!
	1235	!-- Cloud physics parameters
	1236	IF ( cloud_physics ) THEN
[57]	1237	WRITE ( io, 415 )
	1238	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1239	ENDIF
	1240
	1241	!-- Profile of the geostrophic wind (component ug)
	1242	!-- Building output strings
	1243	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1244	gradients = '------'
	1245	slices = ' 0'
	1246	coordinates = ' 0.0'
	1247	i = 1
	1248	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1249
[167]	1250	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1251	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1254	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1255
[167]	1256	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1257	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1258
[167]	1259	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1260	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1261
[430]	1262	IF ( i == 10 ) THEN
	1263	EXIT
	1264	ELSE
	1265	i = i + 1
	1266	ENDIF
	1267
[1]	1268	ENDDO
	1269
	1270	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1271	TRIM( gradients ), TRIM( slices )
	1272
	1273	!-- Profile of the geostrophic wind (component vg)
	1274	!-- Building output strings
	1275	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1276	gradients = '------'
	1277	slices = ' 0'
	1278	coordinates = ' 0.0'
	1279	i = 1
	1280	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1281
[167]	1282	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1283	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1284
[167]	1285	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1286	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1287
[167]	1288	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1289	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1290
[167]	1291	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1292	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1293
[430]	1294	IF ( i == 10 ) THEN
	1295	EXIT
	1296	ELSE
	1297	i = i + 1
	1298	ENDIF
	1299
[1]	1300	ENDDO
	1301
	1302	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1303	TRIM( gradients ), TRIM( slices )
	1304
	1305	!
[767]	1306	!-- Initial wind profiles
	1307	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1308
	1309	!
[1]	1310	!-- Initial temperature profile
	1311	!-- Building output strings, starting with surface temperature
	1312	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1313	gradients = '------'
	1314	slices = ' 0'
	1315	coordinates = ' 0.0'
	1316	i = 1
	1317	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1318
[94]	1319	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1320	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1321
[94]	1322	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1323	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1324
[94]	1325	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1326	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1327
[94]	1328	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1329	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1330
[430]	1331	IF ( i == 10 ) THEN
	1332	EXIT
	1333	ELSE
	1334	i = i + 1
	1335	ENDIF
	1336
[1]	1337	ENDDO
	1338
	1339	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1340	TRIM( gradients ), TRIM( slices )
	1341
	1342	!
	1343	!-- Initial humidity profile
	1344	!-- Building output strings, starting with surface humidity
[75]	1345	IF ( humidity .OR. passive_scalar ) THEN
[1]	1346	WRITE ( temperatures, '(E8.1)' ) q_surface
	1347	gradients = '--------'
	1348	slices = ' 0'
	1349	coordinates = ' 0.0'
	1350	i = 1
	1351	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1352
	1353	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1354	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1355
	1356	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1357	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1358
	1359	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1360	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1361
	1362	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1363	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1364
[430]	1365	IF ( i == 10 ) THEN
	1366	EXIT
	1367	ELSE
	1368	i = i + 1
	1369	ENDIF
	1370
[1]	1371	ENDDO
	1372
[75]	1373	IF ( humidity ) THEN
[1]	1374	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1375	TRIM( gradients ), TRIM( slices )
	1376	ELSE
	1377	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1378	TRIM( gradients ), TRIM( slices )
	1379	ENDIF
	1380	ENDIF
	1381
	1382	!
[97]	1383	!-- Initial salinity profile
	1384	!-- Building output strings, starting with surface salinity
	1385	IF ( ocean ) THEN
	1386	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1387	gradients = '------'
	1388	slices = ' 0'
	1389	coordinates = ' 0.0'
	1390	i = 1
	1391	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1392
	1393	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1394	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1395
	1396	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1397	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1398
	1399	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1400	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1401
	1402	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1403	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1404
[430]	1405	IF ( i == 10 ) THEN
	1406	EXIT
	1407	ELSE
	1408	i = i + 1
	1409	ENDIF
	1410
[97]	1411	ENDDO
	1412
	1413	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1414	TRIM( gradients ), TRIM( slices )
	1415	ENDIF
	1416
	1417	!
[411]	1418	!-- Profile for the large scale vertial velocity
	1419	!-- Building output strings, starting with surface value
	1420	IF ( large_scale_subsidence ) THEN
	1421	temperatures = ' 0.0'
	1422	gradients = '------'
	1423	slices = ' 0'
	1424	coordinates = ' 0.0'
	1425	i = 1
[580]	1426	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1427
	1428	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1429	w_subs(subs_vertical_gradient_level_i(i))
[411]	1430	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1431
[580]	1432	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1433	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1434
[580]	1435	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1436	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1437
[580]	1438	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1439	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1440
[430]	1441	IF ( i == 10 ) THEN
	1442	EXIT
	1443	ELSE
	1444	i = i + 1
	1445	ENDIF
	1446
[411]	1447	ENDDO
	1448
	1449	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1450	TRIM( gradients ), TRIM( slices )
	1451	ENDIF
	1452
	1453	!
[824]	1454	!-- Cloud physcis parameters / quantities / numerical methods
	1455	WRITE ( io, 430 )
	1456	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1457	WRITE ( io, 431 )
	1458	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1459	WRITE ( io, 432 )
	1460	IF ( radiation ) WRITE ( io, 132 )
	1461	IF ( precipitation ) WRITE ( io, 133 )
	1462	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1463	WRITE ( io, 433 )
	1464	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1465	IF ( collision_kernel /= 'none' ) THEN
	1466	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1467	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1468	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1469	ENDIF
[825]	1470	ELSE
[828]	1471	WRITE ( io, 437 )
[825]	1472	ENDIF
[824]	1473	ENDIF
	1474
	1475	!
[1]	1476	!-- LES / turbulence parameters
	1477	WRITE ( io, 450 )
	1478
	1479	!--
	1480	! ... LES-constants used must still be added here
	1481	!--
	1482	IF ( constant_diffusion ) THEN
	1483	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1484	prandtl_number
	1485	ENDIF
	1486	IF ( .NOT. constant_diffusion) THEN
[108]	1487	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1488	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1489	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1490	ENDIF
	1491
	1492	!
	1493	!-- Special actions during the run
	1494	WRITE ( io, 470 )
	1495	IF ( create_disturbances ) THEN
	1496	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1497	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1498	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1499	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1500	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1501	ELSE
	1502	WRITE ( io, 473 ) disturbance_energy_limit
	1503	ENDIF
	1504	WRITE ( io, 474 ) TRIM( random_generator )
	1505	ENDIF
	1506	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1507	WRITE ( io, 475 ) pt_surface_initial_change
	1508	ENDIF
[75]	1509	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1510	WRITE ( io, 476 ) q_surface_initial_change
	1511	ENDIF
	1512	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1513	WRITE ( io, 477 ) q_surface_initial_change
	1514	ENDIF
	1515
[60]	1516	IF ( particle_advection ) THEN
[1]	1517	!
[60]	1518	!-- Particle attributes
	1519	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1520	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1521	end_time_prel, dt_sort_particles
[60]	1522	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1523	IF ( random_start_position ) WRITE ( io, 481 )
	1524	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1525	WRITE ( io, 495 ) total_number_of_particles
[824]	1526	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1527	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1528	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1529	WRITE ( io, 484 ) total_number_of_tails, &
	1530	minimum_tailpoint_distance, &
	1531	maximum_tailpoint_age
	1532	ENDIF
[1]	1533	ENDIF
[60]	1534	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1535	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1536	output_format = ' '
[60]	1537	IF ( netcdf_output ) THEN
[493]	1538	IF ( netcdf_data_format > 1 ) THEN
[60]	1539	output_format = 'netcdf (64 bit offset) and binary'
	1540	ELSE
	1541	output_format = 'netcdf and binary'
	1542	ENDIF
[1]	1543	ELSE
[60]	1544	output_format = 'binary'
[1]	1545	ENDIF
[292]	1546	WRITE ( io, 344 ) output_format
[1]	1547	ENDIF
[60]	1548	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1549	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1550
[60]	1551	WRITE ( io, 487 ) number_of_particle_groups
[1]	1552
[60]	1553	DO i = 1, number_of_particle_groups
	1554	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1555	WRITE ( io, 490 ) i, 0.0
	1556	WRITE ( io, 492 )
[1]	1557	ELSE
[60]	1558	WRITE ( io, 490 ) i, radius(i)
	1559	IF ( density_ratio(i) /= 0.0 ) THEN
	1560	WRITE ( io, 491 ) density_ratio(i)
	1561	ELSE
	1562	WRITE ( io, 492 )
	1563	ENDIF
[1]	1564	ENDIF
[60]	1565	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1566	pdx(i), pdy(i), pdz(i)
[336]	1567	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1568	ENDDO
[1]	1569
[60]	1570	ENDIF
[1]	1571
[60]	1572
[1]	1573	!
	1574	!-- Parameters of 1D-model
	1575	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1576	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1577	mixing_length_1d, dissipation_1d
	1578	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1579	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1580	ENDIF
	1581	ENDIF
	1582
	1583	!
	1584	!-- User-defined informations
	1585	CALL user_header( io )
	1586
	1587	WRITE ( io, 99 )
	1588
	1589	!
	1590	!-- Write buffer contents to disc immediately
[82]	1591	CALL local_flush( io )
[1]	1592
	1593	!
	1594	!-- Here the FORMATs start
	1595
	1596	99 FORMAT (1X,78('-'))
[1106]	1597	100 FORMAT (/1X,'******************************',6X,42('-')/ &
	1598	1X,'* ',A,' *',6X,A/ &
	1599	1X,'******************************',6X,42('-'))
[291]	1600	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1601	37X,42('-'))
[1106]	1602	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
	1603	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1604	' Run on host: ',A10)
[1]	1605	#if defined( __parallel )
[1106]	1606	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1607	')',1X,A)
[200]	1608	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1609	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1610	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1611	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1612	37X,'because the job is running on an SMP-cluster')
[102]	1613	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1614	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1106]	1615	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
	1616	37X,42('-'))
	1617	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
	1618	37X,'independent precursor runs'/ &
	1619	37X,42('-'))
[1111]	1620	117 FORMAT (' Accelerator boards / node: ',I2)
[1]	1621	#endif
	1622	110 FORMAT (/' Numerical Schemes:'/ &
	1623	' -----------------'/)
	1624	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1625	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1626	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1627	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1628	' or Upstream')
	1629	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1630	' or Upstream')
	1631	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1632	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1633	' translation velocity = ',A/ &
[1]	1634	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
[1111]	1635	120 FORMAT (' Accelerator boards: ',8X,I2)
[1]	1636	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1637	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1638	' maximum damping coefficient: ',F5.3, ' 1/s')
	1639	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1640	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1641	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1642	F6.2, ' K assumed')
[824]	1643	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1644	' effective emissivity scheme')
[824]	1645	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1646	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1647	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1648	A,'-cycle)'/ &
	1649	' number of grid levels: ',I2/ &
	1650	' Gauss-Seidel red/black iterations: ',I2)
	1651	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1652	I3,')')
	1653	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1654	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1655	I3,')'/ &
	1656	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1657	I3,')')
	1658	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1659	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1660	140 FORMAT (' maximum residual allowed: ',E10.3)
	1661	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1662	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1663	'step')
[87]	1664	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1665	'kinetic energy')
[927]	1666	144 FORMAT (' masking method is used')
[1]	1667	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1668	'conserved'/ &
	1669	' using the ',A,' mode')
	1670	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1671	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1672	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1673	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1674	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1675	'prognostic equation for')
	1676	154 FORMAT (' the potential temperature')
[1]	1677	200 FORMAT (//' Run time and time step information:'/ &
	1678	' ----------------------------------'/)
[1106]	1679	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1]	1680	' CFL-factor: ',F4.2)
[1106]	1681	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1682	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1683	' End time: ',F9.3,' s')
[1]	1684	204 FORMAT ( A,F9.3,' s')
	1685	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
[1106]	1686	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1687	' CPU-time used: ',F9.3,' s per timestep: ', &
	1688	' ',F9.3,' s'/ &
[1111]	1689	' per second of simulated tim', &
[1]	1690	'e: ',F9.3,' s')
[1106]	1691	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
[1]	1692	250 FORMAT (//' Computational grid and domain size:'/ &
	1693	' ----------------------------------'// &
	1694	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1695	' m dz = ',F7.3,' m'/ &
	1696	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1697	' m z(u) = ',F10.3,' m'/)
	1698	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1699	' factor: ',F5.3/ &
	1700	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1701	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1702	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1703	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1704	' degrees')
	1705	270 FORMAT (//' Topography informations:'/ &
	1706	' -----------------------'// &
	1707	1X,'Topography: ',A)
	1708	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1709	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1710	' / ',I4)
[240]	1711	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1712	' direction' / &
	1713	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1714	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1715	278 FORMAT (' Topography grid definition convention:'/ &
	1716	' cell edge (staggered grid points'/ &
	1717	' (u in x-direction, v in y-direction))' /)
	1718	279 FORMAT (' Topography grid definition convention:'/ &
	1719	' cell center (scalar grid points)' /)
[138]	1720	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1721	' ------------------------------'// &
	1722	' Canopy mode: ', A / &
	1723	' Canopy top: ',I4 / &
	1724	' Leaf drag coefficient: ',F6.2 /)
[153]	1725	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1726	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1727	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1728	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1729	' Height: ',A,' m'/ &
	1730	' Leaf area density: ',A,' m2/m3'/ &
	1731	' Gradient: ',A,' m2/m4'/ &
	1732	' Gridpoint: ',A)
	1733
[1]	1734	300 FORMAT (//' Boundary conditions:'/ &
	1735	' -------------------'// &
	1736	' p uv ', &
	1737	' pt'// &
	1738	' B. bound.: ',A/ &
	1739	' T. bound.: ',A)
[97]	1740	301 FORMAT (/' ',A// &
[1]	1741	' B. bound.: ',A/ &
	1742	' T. bound.: ',A)
[19]	1743	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1744	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1745	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1746	'computational u,v-level:'// &
[978]	1747	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1748	' m kappa = ',F4.2/ &
[1]	1749	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1750	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1751	307 FORMAT (' Heatflux has a random normal distribution')
	1752	308 FORMAT (' Predefined surface temperature')
[97]	1753	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1754	310 FORMAT (//' 1D-Model:'// &
	1755	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1756	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1757	312 FORMAT (' Predefined surface humidity')
	1758	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1759	314 FORMAT (' Predefined scalar value at the surface')
[19]	1760	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1761	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1762	'atmosphere model')
[1]	1763	317 FORMAT (//' Lateral boundaries:'/ &
	1764	' left/right: ',A/ &
	1765	' north/south: ',A)
[978]	1766	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1767	'damping factor = ',F6.4)
[151]	1768	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1769	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1770	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1771	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1772	' v: ',F9.6,' m2/s2')
[151]	1773	325 FORMAT (//' List output:'/ &
[1]	1774	' -----------'// &
	1775	' 1D-Profiles:'/ &
	1776	' Output every ',F8.2,' s')
[151]	1777	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1778	' Averaging input every ',F8.2,' s')
	1779	330 FORMAT (//' Data output:'/ &
	1780	' -----------'/)
	1781	331 FORMAT (/' 1D-Profiles:')
	1782	332 FORMAT (/' ',A)
	1783	333 FORMAT (' Output every ',F8.2,' s',/ &
	1784	' Time averaged over ',F8.2,' s'/ &
	1785	' Averaging input every ',F8.2,' s')
	1786	334 FORMAT (/' 2D-Arrays',A,':')
	1787	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1788	' Output every ',F8.2,' s ',A/ &
	1789	' Cross sections at ',A1,' = ',A/ &
	1790	' scalar-coordinates: ',A,' m'/)
	1791	336 FORMAT (/' 3D-Arrays',A,':')
	1792	337 FORMAT (/' Arrays: ',A/ &
	1793	' Output every ',F8.2,' s ',A/ &
	1794	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1795	338 FORMAT (' Compressed data output'/ &
	1796	' Decimal precision: ',A/)
	1797	339 FORMAT (' No output during initial ',F8.2,' s')
	1798	340 FORMAT (/' Time series:')
	1799	341 FORMAT (' Output every ',F8.2,' s'/)
	1800	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1801	' Output every ',F8.2,' s ',A/ &
	1802	' Time averaged over ',F8.2,' s'/ &
	1803	' Averaging input every ',F8.2,' s'/ &
	1804	' Cross sections at ',A1,' = ',A/ &
	1805	' scalar-coordinates: ',A,' m'/)
	1806	343 FORMAT (/' Arrays: ',A/ &
	1807	' Output every ',F8.2,' s ',A/ &
	1808	' Time averaged over ',F8.2,' s'/ &
	1809	' Averaging input every ',F8.2,' s'/ &
	1810	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1811	344 FORMAT (' Output format: ',A/)
[410]	1812	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1813	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1814	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1815	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1816	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1817	347 FORMAT (' Variables: ',A/ &
	1818	' Output every ',F8.2,' s')
	1819	348 FORMAT (' Variables: ',A/ &
	1820	' Output every ',F8.2,' s'/ &
	1821	' Time averaged over ',F8.2,' s'/ &
	1822	' Averaging input every ',F8.2,' s')
	1823	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1824	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1825	13(' ',8(F8.2,',')/) )
	1826	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1827	'all gridpoints along ',A,'-direction (default).' )
	1828	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1829	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1830	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1831	#if defined( __dvrp_graphics )
	1832	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1833	' Output every ',F7.1,' s'/ &
	1834	' Output mode: ',A/ &
	1835	' Host / User: ',A,' / ',A/ &
	1836	' Directory: ',A// &
	1837	' The sequence contains:')
[337]	1838	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1839	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1840	362 FORMAT (/' Slicer plane ',A/ &
[336]	1841	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1842	363 FORMAT (/' Particles'/ &
[336]	1843	' particle size: ',F7.2,' m')
	1844	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1845	F6.2,',',F6.2,']')
[337]	1846	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1847	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1848	')'/ &
	1849	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1850	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1851	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1852	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1853	#endif
	1854	#if defined( __spectra )
	1855	370 FORMAT (' Spectra:')
	1856	371 FORMAT (' Output every ',F7.1,' s'/)
	1857	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1858	' Directions: ', 10(A5,',')/ &
[189]	1859	' height levels k = ', 20(I3,',')/ &
	1860	' ', 20(I3,',')/ &
	1861	' ', 20(I3,',')/ &
	1862	' ', 20(I3,',')/ &
	1863	' ', 19(I3,','),I3,'.'/ &
[1]	1864	' height levels selected for standard plot:'/ &
[189]	1865	' k = ', 20(I3,',')/ &
	1866	' ', 20(I3,',')/ &
	1867	' ', 20(I3,',')/ &
	1868	' ', 20(I3,',')/ &
	1869	' ', 19(I3,','),I3,'.'/ &
[1]	1870	' Time averaged over ', F7.1, ' s,' / &
	1871	' Profiles for the time averaging are taken every ', &
	1872	F6.1,' s')
	1873	#endif
	1874	400 FORMAT (//' Physical quantities:'/ &
	1875	' -------------------'/)
	1876	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1877	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1878	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1879	' f* = ',F9.6,' 1/s')
	1880	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1881	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1882	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1883	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1884	' ------------------------'/)
[57]	1885	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1886	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1887	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1888	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1889	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1890	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1891	' Height: ',A,' m'/ &
	1892	' Temperature: ',A,' K'/ &
	1893	' Gradient: ',A,' K/100m'/ &
	1894	' Gridpoint: ',A)
	1895	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1896	' Height: ',A,' m'/ &
	1897	' Humidity: ',A,' kg/kg'/ &
	1898	' Gradient: ',A,' (kg/kg)/100m'/ &
	1899	' Gridpoint: ',A)
	1900	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1901	' Height: ',A,' m'/ &
	1902	' Scalar concentration: ',A,' kg/m**3'/ &
	1903	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1904	' Gridpoint: ',A)
	1905	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1906	' Height: ',A,' m'/ &
	1907	' ug: ',A,' m/s'/ &
	1908	' Gradient: ',A,' 1/100s'/ &
	1909	' Gridpoint: ',A)
	1910	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1911	' Height: ',A,' m'/ &
[97]	1912	' vg: ',A,' m/s'/ &
[1]	1913	' Gradient: ',A,' 1/100s'/ &
	1914	' Gridpoint: ',A)
[97]	1915	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1916	' Height: ',A,' m'/ &
	1917	' Salinity: ',A,' psu'/ &
	1918	' Gradient: ',A,' psu/100m'/ &
	1919	' Gridpoint: ',A)
[411]	1920	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1921	' Height: ',A,' m'/ &
	1922	' w_subs: ',A,' m/s'/ &
	1923	' Gradient: ',A,' (m/s)/100m'/ &
	1924	' Gridpoint: ',A)
[767]	1925	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1926	' profiles')
[824]	1927	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1928	' ----------------------------------'/)
	1929	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1930	'on)')
	1931	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1932	' total water content is used.'/ &
	1933	' Condensation is parameterized via 0% - or 100% scheme.')
	1934	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1935	'icle model')
	1936	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1937	' droplets < 1.0E-6 m')
[825]	1938	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1939	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1940	'are used'/ &
	1941	' number of radius classes: ',I3,' interval ', &
	1942	'[1.0E-6,2.0E-4] m'/ &
	1943	' number of dissipation classes: ',I2,' interval ', &
	1944	'[0,1000] cm2/s3')
	1945	437 FORMAT (' Droplet collision is switched off')
[1]	1946	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1947	' ---------------------------'/)
[824]	1948	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1949	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1950	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1951	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1952	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1953	470 FORMAT (//' Actions during the simulation:'/ &
	1954	' -----------------------------'/)
[94]	1955	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1956	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1957	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1958	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1959	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1960	' to i/j =',I4)
	1961	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1962	1X,F5.3, ' m2/s2')
	1963	474 FORMAT (' Random number generator used : ',A/)
	1964	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1965	'respectively, if'/ &
	1966	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1967	' 3D-simulation'/)
	1968	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1969	'respectively, if the'/ &
	1970	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1971	' the 3D-simulation'/)
	1972	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1973	'respectively, if the'/ &
	1974	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1975	' the 3D-simulation'/)
	1976	480 FORMAT (' Particles:'/ &
	1977	' ---------'// &
	1978	' Particle advection is active (switched on at t = ', F7.1, &
	1979	' s)'/ &
	1980	' Start of new particle generations every ',F6.1,' s'/ &
	1981	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1982	' bottom: ', A, ' top: ', A/&
	1983	' Maximum particle age: ',F9.1,' s'/ &
[117]	1984	' Advection stopped at t = ',F9.1,' s'/ &
	1985	' Particles are sorted every ',F9.1,' s'/)
[1]	1986	481 FORMAT (' Particles have random start positions'/)
[336]	1987	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1988	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1989	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1990	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1991	' Maximum age of the end of the tail: ',F8.2,' s')
	1992	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1993	486 FORMAT (' Particle statistics are written on file'/)
	1994	487 FORMAT (' Number of particle groups: ',I2/)
	1995	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1996	' minimum timestep for advection: ', F7.5/)
	1997	489 FORMAT (' Number of particles simultaneously released at each ', &
	1998	'point: ', I5/)
	1999	490 FORMAT (' Particle group ',I2,':'/ &
	2000	' Particle radius: ',E10.3, 'm')
	2001	491 FORMAT (' Particle inertia is activated'/ &
	2002	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2003	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2004	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2005	' y:',F8.1,' - ',F8.1,' m'/&
	2006	' z:',F8.1,' - ',F8.1,' m'/&
	2007	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2008	' m dz = ',F8.1,' m'/)
	2009	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2010	F8.2,' s'/)
	2011	495 FORMAT (' Number of particles in total domain: ',I10/)
	2012	500 FORMAT (//' 1D-Model parameters:'/ &
	2013	' -------------------'// &
	2014	' Simulation time: ',F8.1,' s'/ &
	2015	' Run-controll output every: ',F8.1,' s'/ &
	2016	' Vertical profile output every: ',F8.1,' s'/ &
	2017	' Mixing length calculation: ',A/ &
	2018	' Dissipation calculation: ',A/)
	2019	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2020	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2021	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2022
	2023
	2024	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |