Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1108

Last change on this file since 1108 was 1108, checked in by raasch, 12 years ago
bugfix for r1106 + coupled runs on lckyut/lckyuh
Property svn:keywords set to `Id`
File size: 76.7 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1108]	22	! bugfix for r1106
[941]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1108 2013-03-05 07:03:32Z raasch $
	27	!
[1107]	28	! 1106 2013-03-04 05:31:38Z raasch
	29	! some format changes for coupled runs
	30	!
[1093]	31	! 1092 2013-02-02 11:24:22Z raasch
	32	! unused variables removed
	33	!
[1037]	34	! 1036 2012-10-22 13:43:42Z raasch
	35	! code put under GPL (PALM 3.9)
	36	!
[1035]	37	! 1031 2012-10-19 14:35:30Z raasch
	38	! output of netCDF data format modified
	39	!
[1017]	40	! 1015 2012-09-27 09:23:24Z raasch
	41	! output of Aajustment of mixing length to the Prandtl mixing length at first
	42	! grid point above ground removed
	43	!
[1004]	44	! 1003 2012-09-14 14:35:53Z raasch
	45	! output of information about equal/unequal subdomain size removed
	46	!
[1002]	47	! 1001 2012-09-13 14:08:46Z raasch
	48	! all actions concerning leapfrog- and upstream-spline-scheme removed
	49	!
[979]	50	! 978 2012-08-09 08:28:32Z fricke
	51	! -km_damp_max, outflow_damping_width
	52	! +pt_damping_factor, pt_damping_width
	53	! +z0h
	54	!
[965]	55	! 964 2012-07-26 09:14:24Z raasch
	56	! output of profil-related quantities removed
	57	!
[941]	58	! 940 2012-07-09 14:31:00Z raasch
	59	! Output in case of simulations for pure neutral stratification (no pt-equation
	60	! solved)
	61	!
[928]	62	! 927 2012-06-06 19:15:04Z raasch
	63	! output of masking_method for mg-solver
	64	!
[869]	65	! 868 2012-03-28 12:21:07Z raasch
	66	! translation velocity in Galilean transformation changed to 0.6 * ug
	67	!
[834]	68	! 833 2012-02-22 08:55:55Z maronga
	69	! Adjusted format for leaf area density
	70	!
[829]	71	! 828 2012-02-21 12:00:36Z raasch
	72	! output of dissipation_classes + radius_classes
	73	!
[826]	74	! 825 2012-02-19 03:03:44Z raasch
	75	! Output of cloud physics parameters/quantities complemented and restructured
	76	!
[768]	77	! 767 2011-10-14 06:39:12Z raasch
	78	! Output of given initial u,v-profiles
	79	!
[760]	80	! 759 2011-09-15 13:58:31Z raasch
	81	! output of maximum number of parallel io streams
	82	!
[708]	83	! 707 2011-03-29 11:39:40Z raasch
	84	! bc_lr/ns replaced by bc_lr/ns_cyc
	85	!
[668]	86	! 667 2010-12-23 12:06:00Z suehring/gryschka
	87	! Output of advection scheme.
	88	! Modified output of Prandtl-layer height.
	89	!
[581]	90	! 580 2010-10-05 13:59:11Z heinze
	91	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	92	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	93	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	94	!
[494]	95	! 493 2010-03-01 08:30:24Z raasch
	96	! NetCDF data output format extendend for NetCDF4/HDF5
	97	!
[482]	98	! 449 2010-02-02 11:23:59Z raasch
	99	! +large scale vertical motion (subsidence/ascent)
	100	! Bugfix: index problem concerning gradient_level indices removed
	101	!
[449]	102	! 410 2009-12-04 17:05:40Z letzel
	103	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	104	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	105	!
[392]	106	! 346 2009-07-06 10:13:41Z raasch
[328]	107	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	108	! Coupling with independent precursor runs.
[254]	109	! Output of messages replaced by message handling routine.
[336]	110	! Output of several additional dvr parameters
[240]	111	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	112	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	113	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	114	! topography_grid_convention moved from user_header
[292]	115	! small bugfix concerning 3d 64bit netcdf output format
[1]	116	!
[226]	117	! 206 2008-10-13 14:59:11Z raasch
	118	! Bugfix: error in zu index in case of section_xy = -1
	119	!
[200]	120	! 198 2008-09-17 08:55:28Z raasch
	121	! Format adjustments allowing output of larger revision numbers
	122	!
[198]	123	! 197 2008-09-16 15:29:03Z raasch
	124	! allow 100 spectra levels instead of 10 for consistency with
	125	! define_netcdf_header,
	126	! bugfix in the output of the characteristic levels of potential temperature,
	127	! geostrophic wind, scalar concentration, humidity and leaf area density,
	128	! output of turbulence recycling informations
	129	!
[139]	130	! 138 2007-11-28 10:03:58Z letzel
	131	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	132	! Allow two instead of one digit to specify isosurface and slicer variables.
	133	! Output of sorting frequency of particles
	134	!
[110]	135	! 108 2007-08-24 15:10:38Z letzel
	136	! Output of informations for coupled model runs (boundary conditions etc.)
	137	! + output of momentumfluxes at the top boundary
	138	! Rayleigh damping for ocean, e_init
	139	!
[98]	140	! 97 2007-06-21 08:23:15Z raasch
	141	! Adjustments for the ocean version.
	142	! use_pt_reference renamed use_reference
	143	!
[90]	144	! 87 2007-05-22 15:46:47Z raasch
	145	! Bugfix: output of use_upstream_for_tke
	146	!
[83]	147	! 82 2007-04-16 15:40:52Z raasch
	148	! Preprocessor strings for different linux clusters changed to "lc",
	149	! routine local_flush is used for buffer flushing
	150	!
[77]	151	! 76 2007-03-29 00:58:32Z raasch
	152	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	153	! output of the loop optimization method, moisture renamed humidity,
	154	! output of subversion revision number
	155	!
[39]	156	! 19 2007-02-23 04:53:48Z raasch
	157	! Output of scalar flux applied at top boundary
	158	!
[3]	159	! RCS Log replace by Id keyword, revision history cleaned up
	160	!
[1]	161	! Revision 1.63 2006/08/22 13:53:13 raasch
	162	! Output of dz_max
	163	!
	164	! Revision 1.1 1997/08/11 06:17:20 raasch
	165	! Initial revision
	166	!
	167	!
	168	! Description:
	169	! ------------
	170	! Writing a header with all important informations about the actual run.
	171	! This subroutine is called three times, two times at the beginning
	172	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	173	! end of the run, then writing additional information about CPU-usage on file
	174	! header.
[411]	175	!-----------------------------------------------------------------------------!
[1]	176
	177	USE arrays_3d
	178	USE control_parameters
	179	USE cloud_parameters
	180	USE cpulog
	181	USE dvrp_variables
	182	USE grid_variables
	183	USE indices
	184	USE model_1d
	185	USE particle_attributes
	186	USE pegrid
[411]	187	USE subsidence_mod
[1]	188	USE spectrum
	189
	190	IMPLICIT NONE
	191
	192	CHARACTER (LEN=1) :: prec
	193	CHARACTER (LEN=2) :: do2d_mode
	194	CHARACTER (LEN=5) :: section_chr
	195	CHARACTER (LEN=10) :: coor_chr, host_chr
	196	CHARACTER (LEN=16) :: begin_chr
[1106]	197	CHARACTER (LEN=26) :: ver_rev
[1]	198	CHARACTER (LEN=40) :: output_format
[167]	199	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	200	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	201	domask_chr, run_classification
[167]	202	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	203	temperatures, ugcomponent, vgcomponent
[1]	204	CHARACTER (LEN=85) :: roben, runten
	205
[410]	206	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	207
	208	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	209	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	210	REAL :: cpuseconds_per_simulated_second
	211
	212	!
	213	!-- Open the output file. At the end of the simulation, output is directed
	214	!-- to unit 19.
	215	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	216	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	217	io = 15 ! header output on file RUN_CONTROL
	218	ELSE
	219	io = 19 ! header output on file HEADER
	220	ENDIF
	221	CALL check_open( io )
	222
	223	!
	224	!-- At the end of the run, output file (HEADER) will be rewritten with
	225	!-- new informations
	226	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	227
	228	!
	229	!-- Determine kind of model run
	230	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	231	run_classification = '3D - restart run'
[328]	232	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	233	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	234	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	235	run_classification = '3D - run without 1D - prerun'
[197]	236	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	237	run_classification = '3D - run with 1D - prerun'
[197]	238	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	239	run_classification = '3D - run initialized by user'
[1]	240	ELSE
[254]	241	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	242	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	243	ENDIF
[97]	244	IF ( ocean ) THEN
	245	run_classification = 'ocean - ' // run_classification
	246	ELSE
	247	run_classification = 'atmosphere - ' // run_classification
	248	ENDIF
[1]	249
	250	!
	251	!-- Run-identification, date, time, host
	252	host_chr = host(1:10)
[75]	253	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	254	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	255	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	256	#if defined( __mpi2 )
	257	mpi_type = 2
	258	#else
	259	mpi_type = 1
	260	#endif
	261	WRITE ( io, 101 ) mpi_type, coupling_mode
	262	ENDIF
[1108]	263	#if defined( __parallel )
[1106]	264	IF ( coupling_start_time /= 0.0 ) THEN
	265	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	266	WRITE ( io, 109 )
	267	ELSE
	268	WRITE ( io, 114 )
	269	ENDIF
	270	ENDIF
[1108]	271	#endif
[102]	272	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	273	ADJUSTR( host_chr )
[1]	274	#if defined( __parallel )
	275	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	276	char1 = 'calculated'
	277	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	278	host(1:2) == 'lc' ) .AND. &
	279	npex == -1 .AND. pdims(2) == 1 ) THEN
	280	char1 = 'forced'
	281	ELSE
	282	char1 = 'predefined'
	283	ENDIF
	284	IF ( threads_per_task == 1 ) THEN
[102]	285	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	286	ELSE
[102]	287	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	288	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	289	ENDIF
	290	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	291	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	292	npex == -1 .AND. pdims(2) == 1 ) &
	293	THEN
[102]	294	WRITE ( io, 106 )
[1]	295	ELSEIF ( pdims(2) == 1 ) THEN
[102]	296	WRITE ( io, 107 ) 'x'
[1]	297	ELSEIF ( pdims(1) == 1 ) THEN
[102]	298	WRITE ( io, 107 ) 'y'
[1]	299	ENDIF
[102]	300	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	301	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	302	WRITE ( io, 108 ) maximum_parallel_io_streams
	303	ENDIF
[1]	304	#endif
	305	WRITE ( io, 99 )
	306
	307	!
	308	!-- Numerical schemes
	309	WRITE ( io, 110 )
	310	IF ( psolver(1:7) == 'poisfft' ) THEN
	311	WRITE ( io, 111 ) TRIM( fft_method )
	312	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	313	ELSEIF ( psolver == 'sor' ) THEN
	314	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	315	ELSEIF ( psolver == 'multigrid' ) THEN
	316	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	317	IF ( mg_cycles == -1 ) THEN
	318	WRITE ( io, 140 ) residual_limit
	319	ELSE
	320	WRITE ( io, 141 ) mg_cycles
	321	ENDIF
	322	IF ( mg_switch_to_pe0_level == 0 ) THEN
	323	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	324	nzt_mg(1)
[197]	325	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	326	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	327	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	328	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	329	nzt_mg(mg_switch_to_pe0_level), &
	330	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	331	nzt_mg(1)
	332	ENDIF
[927]	333	IF ( masking_method ) WRITE ( io, 144 )
[1]	334	ENDIF
	335	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	336	THEN
	337	WRITE ( io, 142 )
	338	ENDIF
	339
	340	IF ( momentum_advec == 'pw-scheme' ) THEN
	341	WRITE ( io, 113 )
[667]	342	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	343	WRITE ( io, 503 )
[1]	344	ENDIF
	345	IF ( scalar_advec == 'pw-scheme' ) THEN
	346	WRITE ( io, 116 )
[667]	347	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	348	WRITE ( io, 504 )
[1]	349	ELSE
	350	WRITE ( io, 118 )
	351	ENDIF
[63]	352
	353	WRITE ( io, 139 ) TRIM( loop_optimization )
	354
[1]	355	IF ( galilei_transformation ) THEN
	356	IF ( use_ug_for_galilei_tr ) THEN
[868]	357	char1 = '0.6 * geostrophic wind'
[1]	358	ELSE
	359	char1 = 'mean wind in model domain'
	360	ENDIF
	361	IF ( simulated_time_at_begin == simulated_time ) THEN
	362	char2 = 'at the start of the run'
	363	ELSE
	364	char2 = 'at the end of the run'
	365	ENDIF
	366	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	367	advected_distance_x/1000.0, advected_distance_y/1000.0
	368	ENDIF
[1001]	369	WRITE ( io, 122 ) timestep_scheme
[87]	370	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	371	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	372	IF ( .NOT. ocean ) THEN
	373	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	374	rayleigh_damping_factor
	375	ELSE
	376	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	377	rayleigh_damping_factor
	378	ENDIF
[1]	379	ENDIF
[940]	380	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	381	IF ( humidity ) THEN
[1]	382	IF ( .NOT. cloud_physics ) THEN
	383	WRITE ( io, 129 )
	384	ELSE
	385	WRITE ( io, 130 )
	386	ENDIF
	387	ENDIF
	388	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	389	IF ( conserve_volume_flow ) THEN
[241]	390	WRITE ( io, 150 ) conserve_volume_flow_mode
	391	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	392	WRITE ( io, 151 ) u_bulk, v_bulk
	393	ENDIF
[240]	394	ELSEIF ( dp_external ) THEN
	395	IF ( dp_smooth ) THEN
[241]	396	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	397	ELSE
[241]	398	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	399	ENDIF
	400	ENDIF
[411]	401	IF ( large_scale_subsidence ) THEN
	402	WRITE ( io, 153 )
	403	WRITE ( io, 154 )
	404	ENDIF
[1]	405	WRITE ( io, 99 )
	406
	407	!
	408	!-- Runtime and timestep informations
	409	WRITE ( io, 200 )
	410	IF ( .NOT. dt_fixed ) THEN
	411	WRITE ( io, 201 ) dt_max, cfl_factor
	412	ELSE
	413	WRITE ( io, 202 ) dt
	414	ENDIF
	415	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	416
	417	IF ( time_restart /= 9999999.9 .AND. &
	418	simulated_time_at_begin == simulated_time ) THEN
	419	IF ( dt_restart == 9999999.9 ) THEN
	420	WRITE ( io, 204 ) ' Restart at: ',time_restart
	421	ELSE
	422	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	423	ENDIF
	424	ENDIF
	425
	426	IF ( simulated_time_at_begin /= simulated_time ) THEN
	427	i = MAX ( log_point_s(10)%counts, 1 )
	428	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	429	cpuseconds_per_simulated_second = 0.0
	430	ELSE
	431	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	432	( simulated_time - &
	433	simulated_time_at_begin )
	434	ENDIF
	435	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	436	log_point_s(10)%sum / REAL( i ), &
	437	cpuseconds_per_simulated_second
	438	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	439	IF ( dt_restart == 9999999.9 ) THEN
[1106]	440	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	441	ELSE
[1106]	442	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	443	ENDIF
	444	ENDIF
	445	ENDIF
	446
	447	!
[291]	448	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	449	!-- and ocean are used or have been used. In this case, coupling_start_time
	450	!-- defines the time when the coupling is switched on.
[291]	451	IF ( coupling_start_time /= 0.0 ) THEN
[1106]	452	WRITE ( io, 207 ) coupling_start_time
[291]	453	ENDIF
	454
	455	!
[1]	456	!-- Computational grid
[94]	457	IF ( .NOT. ocean ) THEN
	458	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	459	IF ( dz_stretch_level_index < nzt+1 ) THEN
	460	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	461	dz_stretch_factor, dz_max
	462	ENDIF
	463	ELSE
	464	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	465	IF ( dz_stretch_level_index > 0 ) THEN
	466	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	467	dz_stretch_factor, dz_max
	468	ENDIF
[1]	469	ENDIF
	470	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	471	MIN( nnz+2, nzt+2 )
	472	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	473
	474	!
	475	!-- Topography
	476	WRITE ( io, 270 ) topography
	477	SELECT CASE ( TRIM( topography ) )
	478
	479	CASE ( 'flat' )
	480	! no actions necessary
	481
	482	CASE ( 'single_building' )
	483	blx = INT( building_length_x / dx )
	484	bly = INT( building_length_y / dy )
	485	bh = INT( building_height / dz )
	486
	487	IF ( building_wall_left == 9999999.9 ) THEN
	488	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	489	ENDIF
	490	bxl = INT ( building_wall_left / dx + 0.5 )
	491	bxr = bxl + blx
	492
	493	IF ( building_wall_south == 9999999.9 ) THEN
	494	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	495	ENDIF
	496	bys = INT ( building_wall_south / dy + 0.5 )
	497	byn = bys + bly
	498
	499	WRITE ( io, 271 ) building_length_x, building_length_y, &
	500	building_height, bxl, bxr, bys, byn
	501
[240]	502	CASE ( 'single_street_canyon' )
	503	ch = NINT( canyon_height / dz )
	504	IF ( canyon_width_x /= 9999999.9 ) THEN
	505	!
	506	!-- Street canyon in y direction
	507	cwx = NINT( canyon_width_x / dx )
	508	IF ( canyon_wall_left == 9999999.9 ) THEN
	509	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	510	ENDIF
	511	cxl = NINT( canyon_wall_left / dx )
	512	cxr = cxl + cwx
	513	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	514
	515	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	516	!
	517	!-- Street canyon in x direction
	518	cwy = NINT( canyon_width_y / dy )
	519	IF ( canyon_wall_south == 9999999.9 ) THEN
	520	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	521	ENDIF
	522	cys = NINT( canyon_wall_south / dy )
	523	cyn = cys + cwy
	524	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	525	ENDIF
	526
[1]	527	END SELECT
	528
[256]	529	IF ( TRIM( topography ) /= 'flat' ) THEN
	530	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	531	IF ( TRIM( topography ) == 'single_building' .OR. &
	532	TRIM( topography ) == 'single_street_canyon' ) THEN
	533	WRITE ( io, 278 )
	534	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	535	WRITE ( io, 279 )
	536	ENDIF
	537	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	538	WRITE ( io, 278 )
	539	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	540	WRITE ( io, 279 )
	541	ENDIF
	542	ENDIF
	543
[138]	544	IF ( plant_canopy ) THEN
	545
	546	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	547	IF ( passive_scalar ) THEN
	548	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	549	leaf_surface_concentration
	550	ENDIF
[138]	551
[1]	552	!
[153]	553	!-- Heat flux at the top of vegetation
	554	WRITE ( io, 282 ) cthf
	555
	556	!
[138]	557	!-- Leaf area density profile
	558	!-- Building output strings, starting with surface value
[833]	559	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	560	gradients = '------'
	561	slices = ' 0'
	562	coordinates = ' 0.0'
	563	i = 1
	564	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	565
	566	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	567	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	568
	569	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	570	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	571
	572	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	573	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	574
	575	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	576	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	577
	578	i = i + 1
	579	ENDDO
	580
[153]	581	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	582	TRIM( gradients ), TRIM( slices )
	583
	584	ENDIF
	585
	586	!
[1]	587	!-- Boundary conditions
	588	IF ( ibc_p_b == 0 ) THEN
	589	runten = 'p(0) = 0 \|'
	590	ELSEIF ( ibc_p_b == 1 ) THEN
	591	runten = 'p(0) = p(1) \|'
	592	ELSE
	593	runten = 'p(0) = p(1) +R\|'
	594	ENDIF
	595	IF ( ibc_p_t == 0 ) THEN
	596	roben = 'p(nzt+1) = 0 \|'
	597	ELSE
	598	roben = 'p(nzt+1) = p(nzt) \|'
	599	ENDIF
	600
	601	IF ( ibc_uv_b == 0 ) THEN
	602	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	603	ELSE
	604	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	605	ENDIF
[132]	606	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	607	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	608	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	609	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	610	ELSE
	611	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	612	ENDIF
	613
	614	IF ( ibc_pt_b == 0 ) THEN
	615	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	616	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	617	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	618	ELSEIF ( ibc_pt_b == 2 ) THEN
	619	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	620	ENDIF
	621	IF ( ibc_pt_t == 0 ) THEN
[19]	622	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	623	ELSEIF( ibc_pt_t == 1 ) THEN
	624	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	625	ELSEIF( ibc_pt_t == 2 ) THEN
	626	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	627
[1]	628	ENDIF
	629
	630	WRITE ( io, 300 ) runten, roben
	631
	632	IF ( .NOT. constant_diffusion ) THEN
	633	IF ( ibc_e_b == 1 ) THEN
	634	runten = 'e(0) = e(1)'
	635	ELSE
	636	runten = 'e(0) = e(1) = (u/0.1)*2'
	637	ENDIF
	638	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	639
[97]	640	WRITE ( io, 301 ) 'e', runten, roben
[1]	641
	642	ENDIF
	643
[97]	644	IF ( ocean ) THEN
	645	runten = 'sa(0) = sa(1)'
	646	IF ( ibc_sa_t == 0 ) THEN
	647	roben = 'sa(nzt+1) = sa_surface'
[1]	648	ELSE
[97]	649	roben = 'sa(nzt+1) = sa(nzt)'
[1]	650	ENDIF
[97]	651	WRITE ( io, 301 ) 'sa', runten, roben
	652	ENDIF
[1]	653
[97]	654	IF ( humidity ) THEN
	655	IF ( ibc_q_b == 0 ) THEN
	656	runten = 'q(0) = q_surface'
	657	ELSE
	658	runten = 'q(0) = q(1)'
	659	ENDIF
	660	IF ( ibc_q_t == 0 ) THEN
	661	roben = 'q(nzt) = q_top'
	662	ELSE
	663	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	664	ENDIF
	665	WRITE ( io, 301 ) 'q', runten, roben
	666	ENDIF
[1]	667
[97]	668	IF ( passive_scalar ) THEN
	669	IF ( ibc_q_b == 0 ) THEN
	670	runten = 's(0) = s_surface'
	671	ELSE
	672	runten = 's(0) = s(1)'
	673	ENDIF
	674	IF ( ibc_q_t == 0 ) THEN
	675	roben = 's(nzt) = s_top'
	676	ELSE
	677	roben = 's(nzt) = s(nzt-1) + ds/dz'
	678	ENDIF
	679	WRITE ( io, 301 ) 's', runten, roben
[1]	680	ENDIF
	681
	682	IF ( use_surface_fluxes ) THEN
	683	WRITE ( io, 303 )
	684	IF ( constant_heatflux ) THEN
	685	WRITE ( io, 306 ) surface_heatflux
	686	IF ( random_heatflux ) WRITE ( io, 307 )
	687	ENDIF
[75]	688	IF ( humidity .AND. constant_waterflux ) THEN
[1]	689	WRITE ( io, 311 ) surface_waterflux
	690	ENDIF
	691	IF ( passive_scalar .AND. constant_waterflux ) THEN
	692	WRITE ( io, 313 ) surface_waterflux
	693	ENDIF
	694	ENDIF
	695
[19]	696	IF ( use_top_fluxes ) THEN
	697	WRITE ( io, 304 )
[102]	698	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	699	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	700	IF ( constant_top_heatflux ) THEN
	701	WRITE ( io, 306 ) top_heatflux
	702	ENDIF
	703	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	704	WRITE ( io, 316 )
[19]	705	ENDIF
[97]	706	IF ( ocean .AND. constant_top_salinityflux ) THEN
	707	WRITE ( io, 309 ) top_salinityflux
	708	ENDIF
[75]	709	IF ( humidity .OR. passive_scalar ) THEN
[19]	710	WRITE ( io, 315 )
	711	ENDIF
	712	ENDIF
	713
[1]	714	IF ( prandtl_layer ) THEN
[978]	715	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	716	z0h_factor*roughness_length, kappa, &
[94]	717	rif_min, rif_max
[1]	718	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	719	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	720	WRITE ( io, 312 )
	721	ENDIF
	722	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	723	WRITE ( io, 314 )
	724	ENDIF
	725	ELSE
	726	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	727	WRITE ( io, 310 ) rif_min, rif_max
	728	ENDIF
	729	ENDIF
	730
	731	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	732	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	733	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	734	IF ( turbulent_inflow ) THEN
	735	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	736	inflow_damping_height, inflow_damping_width
	737	ENDIF
[1]	738	ENDIF
	739
	740	!
	741	!-- Listing of 1D-profiles
[151]	742	WRITE ( io, 325 ) dt_dopr_listing
[1]	743	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	744	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	745	ENDIF
	746
	747	!
	748	!-- DATA output
	749	WRITE ( io, 330 )
	750	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	751	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	752	ENDIF
	753
	754	!
	755	!-- 1D-profiles
[346]	756	dopr_chr = 'Profile:'
[1]	757	IF ( dopr_n /= 0 ) THEN
	758	WRITE ( io, 331 )
	759
	760	output_format = ''
	761	IF ( netcdf_output ) THEN
[1031]	762	output_format = output_format_netcdf
[1]	763	ENDIF
[292]	764	WRITE ( io, 344 ) output_format
[1]	765
	766	DO i = 1, dopr_n
	767	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	768	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	769	WRITE ( io, 332 ) dopr_chr
	770	dopr_chr = ' :'
	771	ENDIF
	772	ENDDO
	773
	774	IF ( dopr_chr /= '' ) THEN
	775	WRITE ( io, 332 ) dopr_chr
	776	ENDIF
	777	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	778	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	779	ENDIF
	780
	781	!
	782	!-- 2D-arrays
	783	DO av = 0, 1
	784
	785	i = 1
	786	do2d_xy = ''
	787	do2d_xz = ''
	788	do2d_yz = ''
	789	DO WHILE ( do2d(av,i) /= ' ' )
	790
	791	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	792	do2d_mode = do2d(av,i)(l-1:l)
	793
	794	SELECT CASE ( do2d_mode )
	795	CASE ( 'xy' )
	796	ll = LEN_TRIM( do2d_xy )
	797	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	798	CASE ( 'xz' )
	799	ll = LEN_TRIM( do2d_xz )
	800	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	801	CASE ( 'yz' )
	802	ll = LEN_TRIM( do2d_yz )
	803	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	804	END SELECT
	805
	806	i = i + 1
	807
	808	ENDDO
	809
	810	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	811	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	812	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	813	( netcdf_output .OR. iso2d_output ) ) THEN
	814
	815	IF ( av == 0 ) THEN
	816	WRITE ( io, 334 ) ''
	817	ELSE
	818	WRITE ( io, 334 ) '(time-averaged)'
	819	ENDIF
	820
	821	IF ( do2d_at_begin ) THEN
	822	begin_chr = 'and at the start'
	823	ELSE
	824	begin_chr = ''
	825	ENDIF
	826
	827	output_format = ''
	828	IF ( netcdf_output ) THEN
[1031]	829	output_format = output_format_netcdf
[1]	830	ENDIF
	831	IF ( iso2d_output ) THEN
	832	IF ( netcdf_output ) THEN
[1031]	833	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	834	ELSE
	835	output_format = 'iso2d'
	836	ENDIF
	837	ENDIF
[292]	838	WRITE ( io, 344 ) output_format
[1]	839
	840	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	841	i = 1
	842	slices = '/'
	843	coordinates = '/'
	844	!
	845	!-- Building strings with index and coordinate informations of the
	846	!-- slices
	847	DO WHILE ( section(i,1) /= -9999 )
	848
	849	WRITE (section_chr,'(I5)') section(i,1)
	850	section_chr = ADJUSTL( section_chr )
	851	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	852
[206]	853	IF ( section(i,1) == -1 ) THEN
	854	WRITE (coor_chr,'(F10.1)') -1.0
	855	ELSE
	856	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	857	ENDIF
[1]	858	coor_chr = ADJUSTL( coor_chr )
	859	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	860
	861	i = i + 1
	862	ENDDO
	863	IF ( av == 0 ) THEN
	864	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	865	TRIM( begin_chr ), 'k', TRIM( slices ), &
	866	TRIM( coordinates )
	867	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	868	WRITE ( io, 339 ) skip_time_do2d_xy
	869	ENDIF
	870	ELSE
	871	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	872	TRIM( begin_chr ), averaging_interval, &
	873	dt_averaging_input, 'k', TRIM( slices ), &
	874	TRIM( coordinates )
	875	IF ( skip_time_data_output_av /= 0.0 ) THEN
	876	WRITE ( io, 339 ) skip_time_data_output_av
	877	ENDIF
	878	ENDIF
	879
	880	ENDIF
	881
	882	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	883	i = 1
	884	slices = '/'
	885	coordinates = '/'
	886	!
	887	!-- Building strings with index and coordinate informations of the
	888	!-- slices
	889	DO WHILE ( section(i,2) /= -9999 )
	890
	891	WRITE (section_chr,'(I5)') section(i,2)
	892	section_chr = ADJUSTL( section_chr )
	893	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	894
	895	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	896	coor_chr = ADJUSTL( coor_chr )
	897	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	898
	899	i = i + 1
	900	ENDDO
	901	IF ( av == 0 ) THEN
	902	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	903	TRIM( begin_chr ), 'j', TRIM( slices ), &
	904	TRIM( coordinates )
	905	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	906	WRITE ( io, 339 ) skip_time_do2d_xz
	907	ENDIF
	908	ELSE
	909	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	910	TRIM( begin_chr ), averaging_interval, &
	911	dt_averaging_input, 'j', TRIM( slices ), &
	912	TRIM( coordinates )
	913	IF ( skip_time_data_output_av /= 0.0 ) THEN
	914	WRITE ( io, 339 ) skip_time_data_output_av
	915	ENDIF
	916	ENDIF
	917	ENDIF
	918
	919	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	920	i = 1
	921	slices = '/'
	922	coordinates = '/'
	923	!
	924	!-- Building strings with index and coordinate informations of the
	925	!-- slices
	926	DO WHILE ( section(i,3) /= -9999 )
	927
	928	WRITE (section_chr,'(I5)') section(i,3)
	929	section_chr = ADJUSTL( section_chr )
	930	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	931
	932	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	933	coor_chr = ADJUSTL( coor_chr )
	934	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	935
	936	i = i + 1
	937	ENDDO
	938	IF ( av == 0 ) THEN
	939	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	940	TRIM( begin_chr ), 'i', TRIM( slices ), &
	941	TRIM( coordinates )
	942	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	943	WRITE ( io, 339 ) skip_time_do2d_yz
	944	ENDIF
	945	ELSE
	946	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	947	TRIM( begin_chr ), averaging_interval, &
	948	dt_averaging_input, 'i', TRIM( slices ), &
	949	TRIM( coordinates )
	950	IF ( skip_time_data_output_av /= 0.0 ) THEN
	951	WRITE ( io, 339 ) skip_time_data_output_av
	952	ENDIF
	953	ENDIF
	954	ENDIF
	955
	956	ENDIF
	957
	958	ENDDO
	959
	960	!
	961	!-- 3d-arrays
	962	DO av = 0, 1
	963
	964	i = 1
	965	do3d_chr = ''
	966	DO WHILE ( do3d(av,i) /= ' ' )
	967
	968	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	969	i = i + 1
	970
	971	ENDDO
	972
	973	IF ( do3d_chr /= '' ) THEN
	974	IF ( av == 0 ) THEN
	975	WRITE ( io, 336 ) ''
	976	ELSE
	977	WRITE ( io, 336 ) '(time-averaged)'
	978	ENDIF
	979
	980	output_format = ''
	981	IF ( netcdf_output ) THEN
[1031]	982	output_format = output_format_netcdf
[1]	983	ENDIF
	984	IF ( avs_output ) THEN
	985	IF ( netcdf_output ) THEN
[1031]	986	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	987	ELSE
	988	output_format = 'avs'
	989	ENDIF
	990	ENDIF
[292]	991	WRITE ( io, 344 ) output_format
[1]	992
	993	IF ( do3d_at_begin ) THEN
	994	begin_chr = 'and at the start'
	995	ELSE
	996	begin_chr = ''
	997	ENDIF
	998	IF ( av == 0 ) THEN
	999	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1000	zu(nz_do3d), nz_do3d
	1001	ELSE
	1002	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1003	TRIM( begin_chr ), averaging_interval, &
	1004	dt_averaging_input, zu(nz_do3d), nz_do3d
	1005	ENDIF
	1006
	1007	IF ( do3d_compress ) THEN
	1008	do3d_chr = ''
	1009	i = 1
	1010	DO WHILE ( do3d(av,i) /= ' ' )
	1011
	1012	SELECT CASE ( do3d(av,i) )
	1013	CASE ( 'u' )
	1014	j = 1
	1015	CASE ( 'v' )
	1016	j = 2
	1017	CASE ( 'w' )
	1018	j = 3
	1019	CASE ( 'p' )
	1020	j = 4
	1021	CASE ( 'pt' )
	1022	j = 5
	1023	END SELECT
	1024	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1025	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1026	':' // prec // ','
	1027	i = i + 1
	1028
	1029	ENDDO
	1030	WRITE ( io, 338 ) do3d_chr
	1031
	1032	ENDIF
	1033
	1034	IF ( av == 0 ) THEN
	1035	IF ( skip_time_do3d /= 0.0 ) THEN
	1036	WRITE ( io, 339 ) skip_time_do3d
	1037	ENDIF
	1038	ELSE
	1039	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1040	WRITE ( io, 339 ) skip_time_data_output_av
	1041	ENDIF
	1042	ENDIF
	1043
	1044	ENDIF
	1045
	1046	ENDDO
	1047
	1048	!
[410]	1049	!-- masked arrays
	1050	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1051	mask_scale_x, mask_scale_y, mask_scale_z
	1052	DO mid = 1, masks
	1053	DO av = 0, 1
	1054
	1055	i = 1
	1056	domask_chr = ''
	1057	DO WHILE ( domask(mid,av,i) /= ' ' )
	1058	domask_chr = TRIM( domask_chr ) // ' ' // &
	1059	TRIM( domask(mid,av,i) ) // ','
	1060	i = i + 1
	1061	ENDDO
	1062
	1063	IF ( domask_chr /= '' ) THEN
	1064	IF ( av == 0 ) THEN
	1065	WRITE ( io, 346 ) '', mid
	1066	ELSE
	1067	WRITE ( io, 346 ) ' (time-averaged)', mid
	1068	ENDIF
	1069
[1031]	1070	output_format = ' '
[410]	1071	IF ( netcdf_output ) THEN
[1031]	1072	output_format = output_format_netcdf
[410]	1073	ENDIF
	1074	WRITE ( io, 344 ) output_format
	1075
	1076	IF ( av == 0 ) THEN
	1077	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1078	ELSE
	1079	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1080	averaging_interval, dt_averaging_input
	1081	ENDIF
	1082
	1083	IF ( av == 0 ) THEN
	1084	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1085	WRITE ( io, 339 ) skip_time_domask(mid)
	1086	ENDIF
	1087	ELSE
	1088	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1089	WRITE ( io, 339 ) skip_time_data_output_av
	1090	ENDIF
	1091	ENDIF
	1092	!
	1093	!-- output locations
	1094	DO dim = 1, 3
	1095	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1096	count = 0
	1097	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1098	count = count + 1
	1099	ENDDO
	1100	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1101	mask(mid,dim,:count)
	1102	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1103	mask_loop(mid,dim,2) < 0.0 .AND. &
	1104	mask_loop(mid,dim,3) == 0.0 ) THEN
	1105	WRITE ( io, 350 ) dir(dim), dir(dim)
	1106	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1107	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1108	mask_loop(mid,dim,1:2)
	1109	ELSE
	1110	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1111	mask_loop(mid,dim,1:3)
	1112	ENDIF
	1113	ENDDO
	1114	ENDIF
	1115
	1116	ENDDO
	1117	ENDDO
	1118
	1119	!
[1]	1120	!-- Timeseries
	1121	IF ( dt_dots /= 9999999.9 ) THEN
	1122	WRITE ( io, 340 )
	1123
	1124	output_format = ''
	1125	IF ( netcdf_output ) THEN
[1031]	1126	output_format = output_format_netcdf
[1]	1127	ENDIF
[292]	1128	WRITE ( io, 344 ) output_format
[1]	1129	WRITE ( io, 341 ) dt_dots
	1130	ENDIF
	1131
	1132	#if defined( __dvrp_graphics )
	1133	!
	1134	!-- Dvrp-output
	1135	IF ( dt_dvrp /= 9999999.9 ) THEN
	1136	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1137	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1138	i = 1
	1139	l = 0
[336]	1140	m = 0
[1]	1141	DO WHILE ( mode_dvrp(i) /= ' ' )
	1142	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1143	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1144	l = l + 1
	1145	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1146	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1147	isosurface_color(:,l)
[1]	1148	ENDIF
	1149	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1150	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1151	m = m + 1
	1152	IF ( do2d(0,j) /= ' ' ) THEN
	1153	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1154	slicer_range_limits_dvrp(:,m)
	1155	ENDIF
[1]	1156	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1157	WRITE ( io, 363 ) dvrp_psize
	1158	IF ( particle_dvrpsize /= 'none' ) THEN
	1159	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1160	dvrpsize_interval
	1161	ENDIF
	1162	IF ( particle_color /= 'none' ) THEN
	1163	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1164	color_interval
	1165	ENDIF
[1]	1166	ENDIF
	1167	i = i + 1
	1168	ENDDO
[237]	1169
[336]	1170	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1171	superelevation_y, superelevation, clip_dvrp_l, &
	1172	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1173
	1174	IF ( TRIM( topography ) /= 'flat' ) THEN
	1175	WRITE ( io, 366 ) topography_color
	1176	IF ( cluster_size > 1 ) THEN
	1177	WRITE ( io, 367 ) cluster_size
	1178	ENDIF
[237]	1179	ENDIF
	1180
[1]	1181	ENDIF
	1182	#endif
	1183
	1184	#if defined( __spectra )
	1185	!
	1186	!-- Spectra output
	1187	IF ( dt_dosp /= 9999999.9 ) THEN
	1188	WRITE ( io, 370 )
	1189
[1031]	1190	output_format = ' '
[1]	1191	IF ( netcdf_output ) THEN
[1031]	1192	output_format = output_format_netcdf
[1]	1193	ENDIF
[292]	1194	WRITE ( io, 344 ) output_format
[1]	1195	WRITE ( io, 371 ) dt_dosp
	1196	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1197	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1198	( spectra_direction(i), i = 1,10 ), &
[189]	1199	( comp_spectra_level(i), i = 1,100 ), &
	1200	( plot_spectra_level(i), i = 1,100 ), &
[1]	1201	averaging_interval_sp, dt_averaging_input_pr
	1202	ENDIF
	1203	#endif
	1204
	1205	WRITE ( io, 99 )
	1206
	1207	!
	1208	!-- Physical quantities
	1209	WRITE ( io, 400 )
	1210
	1211	!
	1212	!-- Geostrophic parameters
	1213	WRITE ( io, 410 ) omega, phi, f, fs
	1214
	1215	!
	1216	!-- Other quantities
	1217	WRITE ( io, 411 ) g
[97]	1218	IF ( use_reference ) THEN
	1219	IF ( ocean ) THEN
	1220	WRITE ( io, 412 ) prho_reference
	1221	ELSE
	1222	WRITE ( io, 413 ) pt_reference
	1223	ENDIF
	1224	ENDIF
[1]	1225
	1226	!
	1227	!-- Cloud physics parameters
	1228	IF ( cloud_physics ) THEN
[57]	1229	WRITE ( io, 415 )
	1230	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1231	ENDIF
	1232
	1233	!-- Profile of the geostrophic wind (component ug)
	1234	!-- Building output strings
	1235	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1236	gradients = '------'
	1237	slices = ' 0'
	1238	coordinates = ' 0.0'
	1239	i = 1
	1240	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1241
[167]	1242	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1243	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1244
[167]	1245	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1246	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1247
[167]	1248	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1249	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1250
[167]	1251	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1252	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1253
[430]	1254	IF ( i == 10 ) THEN
	1255	EXIT
	1256	ELSE
	1257	i = i + 1
	1258	ENDIF
	1259
[1]	1260	ENDDO
	1261
	1262	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1263	TRIM( gradients ), TRIM( slices )
	1264
	1265	!-- Profile of the geostrophic wind (component vg)
	1266	!-- Building output strings
	1267	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1268	gradients = '------'
	1269	slices = ' 0'
	1270	coordinates = ' 0.0'
	1271	i = 1
	1272	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1273
[167]	1274	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1275	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1276
[167]	1277	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1279
[167]	1280	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1282
[167]	1283	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1285
[430]	1286	IF ( i == 10 ) THEN
	1287	EXIT
	1288	ELSE
	1289	i = i + 1
	1290	ENDIF
	1291
[1]	1292	ENDDO
	1293
	1294	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1295	TRIM( gradients ), TRIM( slices )
	1296
	1297	!
[767]	1298	!-- Initial wind profiles
	1299	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1300
	1301	!
[1]	1302	!-- Initial temperature profile
	1303	!-- Building output strings, starting with surface temperature
	1304	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1305	gradients = '------'
	1306	slices = ' 0'
	1307	coordinates = ' 0.0'
	1308	i = 1
	1309	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1310
[94]	1311	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1312	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1313
[94]	1314	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1315	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1316
[94]	1317	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1318	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1319
[94]	1320	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1321	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1322
[430]	1323	IF ( i == 10 ) THEN
	1324	EXIT
	1325	ELSE
	1326	i = i + 1
	1327	ENDIF
	1328
[1]	1329	ENDDO
	1330
	1331	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1332	TRIM( gradients ), TRIM( slices )
	1333
	1334	!
	1335	!-- Initial humidity profile
	1336	!-- Building output strings, starting with surface humidity
[75]	1337	IF ( humidity .OR. passive_scalar ) THEN
[1]	1338	WRITE ( temperatures, '(E8.1)' ) q_surface
	1339	gradients = '--------'
	1340	slices = ' 0'
	1341	coordinates = ' 0.0'
	1342	i = 1
	1343	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1344
	1345	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1346	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1347
	1348	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1349	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1350
	1351	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1352	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1353
	1354	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1355	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1356
[430]	1357	IF ( i == 10 ) THEN
	1358	EXIT
	1359	ELSE
	1360	i = i + 1
	1361	ENDIF
	1362
[1]	1363	ENDDO
	1364
[75]	1365	IF ( humidity ) THEN
[1]	1366	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1367	TRIM( gradients ), TRIM( slices )
	1368	ELSE
	1369	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1370	TRIM( gradients ), TRIM( slices )
	1371	ENDIF
	1372	ENDIF
	1373
	1374	!
[97]	1375	!-- Initial salinity profile
	1376	!-- Building output strings, starting with surface salinity
	1377	IF ( ocean ) THEN
	1378	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1379	gradients = '------'
	1380	slices = ' 0'
	1381	coordinates = ' 0.0'
	1382	i = 1
	1383	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1384
	1385	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1386	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1387
	1388	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1389	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1390
	1391	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1392	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1393
	1394	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1395	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1396
[430]	1397	IF ( i == 10 ) THEN
	1398	EXIT
	1399	ELSE
	1400	i = i + 1
	1401	ENDIF
	1402
[97]	1403	ENDDO
	1404
	1405	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1406	TRIM( gradients ), TRIM( slices )
	1407	ENDIF
	1408
	1409	!
[411]	1410	!-- Profile for the large scale vertial velocity
	1411	!-- Building output strings, starting with surface value
	1412	IF ( large_scale_subsidence ) THEN
	1413	temperatures = ' 0.0'
	1414	gradients = '------'
	1415	slices = ' 0'
	1416	coordinates = ' 0.0'
	1417	i = 1
[580]	1418	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1419
	1420	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1421	w_subs(subs_vertical_gradient_level_i(i))
[411]	1422	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1423
[580]	1424	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1425	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1426
[580]	1427	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1428	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1429
[580]	1430	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1431	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1432
[430]	1433	IF ( i == 10 ) THEN
	1434	EXIT
	1435	ELSE
	1436	i = i + 1
	1437	ENDIF
	1438
[411]	1439	ENDDO
	1440
	1441	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1442	TRIM( gradients ), TRIM( slices )
	1443	ENDIF
	1444
	1445	!
[824]	1446	!-- Cloud physcis parameters / quantities / numerical methods
	1447	WRITE ( io, 430 )
	1448	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1449	WRITE ( io, 431 )
	1450	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1451	WRITE ( io, 432 )
	1452	IF ( radiation ) WRITE ( io, 132 )
	1453	IF ( precipitation ) WRITE ( io, 133 )
	1454	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1455	WRITE ( io, 433 )
	1456	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1457	IF ( collision_kernel /= 'none' ) THEN
	1458	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1459	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1460	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1461	ENDIF
[825]	1462	ELSE
[828]	1463	WRITE ( io, 437 )
[825]	1464	ENDIF
[824]	1465	ENDIF
	1466
	1467	!
[1]	1468	!-- LES / turbulence parameters
	1469	WRITE ( io, 450 )
	1470
	1471	!--
	1472	! ... LES-constants used must still be added here
	1473	!--
	1474	IF ( constant_diffusion ) THEN
	1475	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1476	prandtl_number
	1477	ENDIF
	1478	IF ( .NOT. constant_diffusion) THEN
[108]	1479	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1480	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1481	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1482	ENDIF
	1483
	1484	!
	1485	!-- Special actions during the run
	1486	WRITE ( io, 470 )
	1487	IF ( create_disturbances ) THEN
	1488	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1489	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1490	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1491	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1492	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1493	ELSE
	1494	WRITE ( io, 473 ) disturbance_energy_limit
	1495	ENDIF
	1496	WRITE ( io, 474 ) TRIM( random_generator )
	1497	ENDIF
	1498	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1499	WRITE ( io, 475 ) pt_surface_initial_change
	1500	ENDIF
[75]	1501	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1502	WRITE ( io, 476 ) q_surface_initial_change
	1503	ENDIF
	1504	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1505	WRITE ( io, 477 ) q_surface_initial_change
	1506	ENDIF
	1507
[60]	1508	IF ( particle_advection ) THEN
[1]	1509	!
[60]	1510	!-- Particle attributes
	1511	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1512	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1513	end_time_prel, dt_sort_particles
[60]	1514	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1515	IF ( random_start_position ) WRITE ( io, 481 )
	1516	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1517	WRITE ( io, 495 ) total_number_of_particles
[824]	1518	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1519	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1520	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1521	WRITE ( io, 484 ) total_number_of_tails, &
	1522	minimum_tailpoint_distance, &
	1523	maximum_tailpoint_age
	1524	ENDIF
[1]	1525	ENDIF
[60]	1526	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1527	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1528	output_format = ' '
[60]	1529	IF ( netcdf_output ) THEN
[493]	1530	IF ( netcdf_data_format > 1 ) THEN
[60]	1531	output_format = 'netcdf (64 bit offset) and binary'
	1532	ELSE
	1533	output_format = 'netcdf and binary'
	1534	ENDIF
[1]	1535	ELSE
[60]	1536	output_format = 'binary'
[1]	1537	ENDIF
[292]	1538	WRITE ( io, 344 ) output_format
[1]	1539	ENDIF
[60]	1540	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1541	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1542
[60]	1543	WRITE ( io, 487 ) number_of_particle_groups
[1]	1544
[60]	1545	DO i = 1, number_of_particle_groups
	1546	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1547	WRITE ( io, 490 ) i, 0.0
	1548	WRITE ( io, 492 )
[1]	1549	ELSE
[60]	1550	WRITE ( io, 490 ) i, radius(i)
	1551	IF ( density_ratio(i) /= 0.0 ) THEN
	1552	WRITE ( io, 491 ) density_ratio(i)
	1553	ELSE
	1554	WRITE ( io, 492 )
	1555	ENDIF
[1]	1556	ENDIF
[60]	1557	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1558	pdx(i), pdy(i), pdz(i)
[336]	1559	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1560	ENDDO
[1]	1561
[60]	1562	ENDIF
[1]	1563
[60]	1564
[1]	1565	!
	1566	!-- Parameters of 1D-model
	1567	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1568	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1569	mixing_length_1d, dissipation_1d
	1570	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1571	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1572	ENDIF
	1573	ENDIF
	1574
	1575	!
	1576	!-- User-defined informations
	1577	CALL user_header( io )
	1578
	1579	WRITE ( io, 99 )
	1580
	1581	!
	1582	!-- Write buffer contents to disc immediately
[82]	1583	CALL local_flush( io )
[1]	1584
	1585	!
	1586	!-- Here the FORMATs start
	1587
	1588	99 FORMAT (1X,78('-'))
[1106]	1589	100 FORMAT (/1X,'******************************',6X,42('-')/ &
	1590	1X,'* ',A,' *',6X,A/ &
	1591	1X,'******************************',6X,42('-'))
[291]	1592	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1593	37X,42('-'))
[1106]	1594	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
	1595	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1596	' Run on host: ',A10)
[1]	1597	#if defined( __parallel )
[1106]	1598	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1599	')',1X,A)
[200]	1600	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1601	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1602	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1603	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1604	37X,'because the job is running on an SMP-cluster')
[102]	1605	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1606	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1106]	1607	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
	1608	37X,42('-'))
	1609	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
	1610	37X,'independent precursor runs'/ &
	1611	37X,42('-'))
[1]	1612	#endif
	1613	110 FORMAT (/' Numerical Schemes:'/ &
	1614	' -----------------'/)
	1615	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1616	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1617	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1618	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1619	' or Upstream')
	1620	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1621	' or Upstream')
	1622	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1623	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1624	' translation velocity = ',A/ &
[1]	1625	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1626	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1627	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1628	' maximum damping coefficient: ',F5.3, ' 1/s')
	1629	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1630	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1631	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1632	F6.2, ' K assumed')
[824]	1633	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1634	' effective emissivity scheme')
[824]	1635	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1636	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1637	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1638	A,'-cycle)'/ &
	1639	' number of grid levels: ',I2/ &
	1640	' Gauss-Seidel red/black iterations: ',I2)
	1641	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1642	I3,')')
	1643	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1644	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1645	I3,')'/ &
	1646	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1647	I3,')')
	1648	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1649	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1650	140 FORMAT (' maximum residual allowed: ',E10.3)
	1651	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1652	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1653	'step')
[87]	1654	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1655	'kinetic energy')
[927]	1656	144 FORMAT (' masking method is used')
[1]	1657	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1658	'conserved'/ &
	1659	' using the ',A,' mode')
	1660	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1661	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1662	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1663	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1664	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1665	'prognostic equation for')
	1666	154 FORMAT (' the potential temperature')
[1]	1667	200 FORMAT (//' Run time and time step information:'/ &
	1668	' ----------------------------------'/)
[1106]	1669	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1]	1670	' CFL-factor: ',F4.2)
[1106]	1671	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1672	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1673	' End time: ',F9.3,' s')
[1]	1674	204 FORMAT ( A,F9.3,' s')
	1675	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
[1106]	1676	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1677	' CPU-time used: ',F9.3,' s per timestep: ', &
	1678	' ',F9.3,' s'/ &
	1679	' per second of simulated tim', &
[1]	1680	'e: ',F9.3,' s')
[1106]	1681	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
[1]	1682	250 FORMAT (//' Computational grid and domain size:'/ &
	1683	' ----------------------------------'// &
	1684	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1685	' m dz = ',F7.3,' m'/ &
	1686	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1687	' m z(u) = ',F10.3,' m'/)
	1688	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1689	' factor: ',F5.3/ &
	1690	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1691	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1692	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1693	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1694	' degrees')
	1695	270 FORMAT (//' Topography informations:'/ &
	1696	' -----------------------'// &
	1697	1X,'Topography: ',A)
	1698	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1699	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1700	' / ',I4)
[240]	1701	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1702	' direction' / &
	1703	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1704	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1705	278 FORMAT (' Topography grid definition convention:'/ &
	1706	' cell edge (staggered grid points'/ &
	1707	' (u in x-direction, v in y-direction))' /)
	1708	279 FORMAT (' Topography grid definition convention:'/ &
	1709	' cell center (scalar grid points)' /)
[138]	1710	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1711	' ------------------------------'// &
	1712	' Canopy mode: ', A / &
	1713	' Canopy top: ',I4 / &
	1714	' Leaf drag coefficient: ',F6.2 /)
[153]	1715	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1716	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1717	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1718	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1719	' Height: ',A,' m'/ &
	1720	' Leaf area density: ',A,' m2/m3'/ &
	1721	' Gradient: ',A,' m2/m4'/ &
	1722	' Gridpoint: ',A)
	1723
[1]	1724	300 FORMAT (//' Boundary conditions:'/ &
	1725	' -------------------'// &
	1726	' p uv ', &
	1727	' pt'// &
	1728	' B. bound.: ',A/ &
	1729	' T. bound.: ',A)
[97]	1730	301 FORMAT (/' ',A// &
[1]	1731	' B. bound.: ',A/ &
	1732	' T. bound.: ',A)
[19]	1733	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1734	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1735	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1736	'computational u,v-level:'// &
[978]	1737	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1738	' m kappa = ',F4.2/ &
[1]	1739	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1740	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1741	307 FORMAT (' Heatflux has a random normal distribution')
	1742	308 FORMAT (' Predefined surface temperature')
[97]	1743	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1744	310 FORMAT (//' 1D-Model:'// &
	1745	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1746	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1747	312 FORMAT (' Predefined surface humidity')
	1748	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1749	314 FORMAT (' Predefined scalar value at the surface')
[19]	1750	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1751	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1752	'atmosphere model')
[1]	1753	317 FORMAT (//' Lateral boundaries:'/ &
	1754	' left/right: ',A/ &
	1755	' north/south: ',A)
[978]	1756	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1757	'damping factor = ',F6.4)
[151]	1758	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1759	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1760	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1761	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1762	' v: ',F9.6,' m2/s2')
[151]	1763	325 FORMAT (//' List output:'/ &
[1]	1764	' -----------'// &
	1765	' 1D-Profiles:'/ &
	1766	' Output every ',F8.2,' s')
[151]	1767	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1768	' Averaging input every ',F8.2,' s')
	1769	330 FORMAT (//' Data output:'/ &
	1770	' -----------'/)
	1771	331 FORMAT (/' 1D-Profiles:')
	1772	332 FORMAT (/' ',A)
	1773	333 FORMAT (' Output every ',F8.2,' s',/ &
	1774	' Time averaged over ',F8.2,' s'/ &
	1775	' Averaging input every ',F8.2,' s')
	1776	334 FORMAT (/' 2D-Arrays',A,':')
	1777	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1778	' Output every ',F8.2,' s ',A/ &
	1779	' Cross sections at ',A1,' = ',A/ &
	1780	' scalar-coordinates: ',A,' m'/)
	1781	336 FORMAT (/' 3D-Arrays',A,':')
	1782	337 FORMAT (/' Arrays: ',A/ &
	1783	' Output every ',F8.2,' s ',A/ &
	1784	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1785	338 FORMAT (' Compressed data output'/ &
	1786	' Decimal precision: ',A/)
	1787	339 FORMAT (' No output during initial ',F8.2,' s')
	1788	340 FORMAT (/' Time series:')
	1789	341 FORMAT (' Output every ',F8.2,' s'/)
	1790	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1791	' Output every ',F8.2,' s ',A/ &
	1792	' Time averaged over ',F8.2,' s'/ &
	1793	' Averaging input every ',F8.2,' s'/ &
	1794	' Cross sections at ',A1,' = ',A/ &
	1795	' scalar-coordinates: ',A,' m'/)
	1796	343 FORMAT (/' Arrays: ',A/ &
	1797	' Output every ',F8.2,' s ',A/ &
	1798	' Time averaged over ',F8.2,' s'/ &
	1799	' Averaging input every ',F8.2,' s'/ &
	1800	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1801	344 FORMAT (' Output format: ',A/)
[410]	1802	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1803	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1804	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1805	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1806	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1807	347 FORMAT (' Variables: ',A/ &
	1808	' Output every ',F8.2,' s')
	1809	348 FORMAT (' Variables: ',A/ &
	1810	' Output every ',F8.2,' s'/ &
	1811	' Time averaged over ',F8.2,' s'/ &
	1812	' Averaging input every ',F8.2,' s')
	1813	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1814	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1815	13(' ',8(F8.2,',')/) )
	1816	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1817	'all gridpoints along ',A,'-direction (default).' )
	1818	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1819	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1820	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1821	#if defined( __dvrp_graphics )
	1822	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1823	' Output every ',F7.1,' s'/ &
	1824	' Output mode: ',A/ &
	1825	' Host / User: ',A,' / ',A/ &
	1826	' Directory: ',A// &
	1827	' The sequence contains:')
[337]	1828	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1829	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1830	362 FORMAT (/' Slicer plane ',A/ &
[336]	1831	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1832	363 FORMAT (/' Particles'/ &
[336]	1833	' particle size: ',F7.2,' m')
	1834	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1835	F6.2,',',F6.2,']')
[337]	1836	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1837	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1838	')'/ &
	1839	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1840	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1841	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1842	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1843	#endif
	1844	#if defined( __spectra )
	1845	370 FORMAT (' Spectra:')
	1846	371 FORMAT (' Output every ',F7.1,' s'/)
	1847	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1848	' Directions: ', 10(A5,',')/ &
[189]	1849	' height levels k = ', 20(I3,',')/ &
	1850	' ', 20(I3,',')/ &
	1851	' ', 20(I3,',')/ &
	1852	' ', 20(I3,',')/ &
	1853	' ', 19(I3,','),I3,'.'/ &
[1]	1854	' height levels selected for standard plot:'/ &
[189]	1855	' k = ', 20(I3,',')/ &
	1856	' ', 20(I3,',')/ &
	1857	' ', 20(I3,',')/ &
	1858	' ', 20(I3,',')/ &
	1859	' ', 19(I3,','),I3,'.'/ &
[1]	1860	' Time averaged over ', F7.1, ' s,' / &
	1861	' Profiles for the time averaging are taken every ', &
	1862	F6.1,' s')
	1863	#endif
	1864	400 FORMAT (//' Physical quantities:'/ &
	1865	' -------------------'/)
	1866	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1867	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1868	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1869	' f* = ',F9.6,' 1/s')
	1870	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1871	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1872	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1873	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1874	' ------------------------'/)
[57]	1875	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1876	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1877	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1878	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1879	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1880	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1881	' Height: ',A,' m'/ &
	1882	' Temperature: ',A,' K'/ &
	1883	' Gradient: ',A,' K/100m'/ &
	1884	' Gridpoint: ',A)
	1885	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1886	' Height: ',A,' m'/ &
	1887	' Humidity: ',A,' kg/kg'/ &
	1888	' Gradient: ',A,' (kg/kg)/100m'/ &
	1889	' Gridpoint: ',A)
	1890	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1891	' Height: ',A,' m'/ &
	1892	' Scalar concentration: ',A,' kg/m**3'/ &
	1893	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1894	' Gridpoint: ',A)
	1895	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1896	' Height: ',A,' m'/ &
	1897	' ug: ',A,' m/s'/ &
	1898	' Gradient: ',A,' 1/100s'/ &
	1899	' Gridpoint: ',A)
	1900	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1901	' Height: ',A,' m'/ &
[97]	1902	' vg: ',A,' m/s'/ &
[1]	1903	' Gradient: ',A,' 1/100s'/ &
	1904	' Gridpoint: ',A)
[97]	1905	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1906	' Height: ',A,' m'/ &
	1907	' Salinity: ',A,' psu'/ &
	1908	' Gradient: ',A,' psu/100m'/ &
	1909	' Gridpoint: ',A)
[411]	1910	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1911	' Height: ',A,' m'/ &
	1912	' w_subs: ',A,' m/s'/ &
	1913	' Gradient: ',A,' (m/s)/100m'/ &
	1914	' Gridpoint: ',A)
[767]	1915	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1916	' profiles')
[824]	1917	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1918	' ----------------------------------'/)
	1919	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1920	'on)')
	1921	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1922	' total water content is used.'/ &
	1923	' Condensation is parameterized via 0% - or 100% scheme.')
	1924	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1925	'icle model')
	1926	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1927	' droplets < 1.0E-6 m')
[825]	1928	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1929	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1930	'are used'/ &
	1931	' number of radius classes: ',I3,' interval ', &
	1932	'[1.0E-6,2.0E-4] m'/ &
	1933	' number of dissipation classes: ',I2,' interval ', &
	1934	'[0,1000] cm2/s3')
	1935	437 FORMAT (' Droplet collision is switched off')
[1]	1936	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1937	' ---------------------------'/)
[824]	1938	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1939	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1940	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1941	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1942	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1943	470 FORMAT (//' Actions during the simulation:'/ &
	1944	' -----------------------------'/)
[94]	1945	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1946	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1947	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1948	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1949	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1950	' to i/j =',I4)
	1951	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1952	1X,F5.3, ' m2/s2')
	1953	474 FORMAT (' Random number generator used : ',A/)
	1954	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1955	'respectively, if'/ &
	1956	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1957	' 3D-simulation'/)
	1958	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1959	'respectively, if the'/ &
	1960	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1961	' the 3D-simulation'/)
	1962	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1963	'respectively, if the'/ &
	1964	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1965	' the 3D-simulation'/)
	1966	480 FORMAT (' Particles:'/ &
	1967	' ---------'// &
	1968	' Particle advection is active (switched on at t = ', F7.1, &
	1969	' s)'/ &
	1970	' Start of new particle generations every ',F6.1,' s'/ &
	1971	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1972	' bottom: ', A, ' top: ', A/&
	1973	' Maximum particle age: ',F9.1,' s'/ &
[117]	1974	' Advection stopped at t = ',F9.1,' s'/ &
	1975	' Particles are sorted every ',F9.1,' s'/)
[1]	1976	481 FORMAT (' Particles have random start positions'/)
[336]	1977	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1978	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1979	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1980	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1981	' Maximum age of the end of the tail: ',F8.2,' s')
	1982	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1983	486 FORMAT (' Particle statistics are written on file'/)
	1984	487 FORMAT (' Number of particle groups: ',I2/)
	1985	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1986	' minimum timestep for advection: ', F7.5/)
	1987	489 FORMAT (' Number of particles simultaneously released at each ', &
	1988	'point: ', I5/)
	1989	490 FORMAT (' Particle group ',I2,':'/ &
	1990	' Particle radius: ',E10.3, 'm')
	1991	491 FORMAT (' Particle inertia is activated'/ &
	1992	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1993	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1994	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1995	' y:',F8.1,' - ',F8.1,' m'/&
	1996	' z:',F8.1,' - ',F8.1,' m'/&
	1997	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1998	' m dz = ',F8.1,' m'/)
	1999	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2000	F8.2,' s'/)
	2001	495 FORMAT (' Number of particles in total domain: ',I10/)
	2002	500 FORMAT (//' 1D-Model parameters:'/ &
	2003	' -------------------'// &
	2004	' Simulation time: ',F8.1,' s'/ &
	2005	' Run-controll output every: ',F8.1,' s'/ &
	2006	' Vertical profile output every: ',F8.1,' s'/ &
	2007	' Mixing length calculation: ',A/ &
	2008	' Dissipation calculation: ',A/)
	2009	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2010	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2011	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2012
	2013
	2014	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |