Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1102

Last change on this file since 1102 was 1093, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 76.4 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1093]	22	!
[941]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1093 2013-02-02 12:58:49Z raasch $
	27	!
[1093]	28	! 1092 2013-02-02 11:24:22Z raasch
	29	! unused variables removed
	30	!
[1037]	31	! 1036 2012-10-22 13:43:42Z raasch
	32	! code put under GPL (PALM 3.9)
	33	!
[1035]	34	! 1031 2012-10-19 14:35:30Z raasch
	35	! output of netCDF data format modified
	36	!
[1017]	37	! 1015 2012-09-27 09:23:24Z raasch
	38	! output of Aajustment of mixing length to the Prandtl mixing length at first
	39	! grid point above ground removed
	40	!
[1004]	41	! 1003 2012-09-14 14:35:53Z raasch
	42	! output of information about equal/unequal subdomain size removed
	43	!
[1002]	44	! 1001 2012-09-13 14:08:46Z raasch
	45	! all actions concerning leapfrog- and upstream-spline-scheme removed
	46	!
[979]	47	! 978 2012-08-09 08:28:32Z fricke
	48	! -km_damp_max, outflow_damping_width
	49	! +pt_damping_factor, pt_damping_width
	50	! +z0h
	51	!
[965]	52	! 964 2012-07-26 09:14:24Z raasch
	53	! output of profil-related quantities removed
	54	!
[941]	55	! 940 2012-07-09 14:31:00Z raasch
	56	! Output in case of simulations for pure neutral stratification (no pt-equation
	57	! solved)
	58	!
[928]	59	! 927 2012-06-06 19:15:04Z raasch
	60	! output of masking_method for mg-solver
	61	!
[869]	62	! 868 2012-03-28 12:21:07Z raasch
	63	! translation velocity in Galilean transformation changed to 0.6 * ug
	64	!
[834]	65	! 833 2012-02-22 08:55:55Z maronga
	66	! Adjusted format for leaf area density
	67	!
[829]	68	! 828 2012-02-21 12:00:36Z raasch
	69	! output of dissipation_classes + radius_classes
	70	!
[826]	71	! 825 2012-02-19 03:03:44Z raasch
	72	! Output of cloud physics parameters/quantities complemented and restructured
	73	!
[768]	74	! 767 2011-10-14 06:39:12Z raasch
	75	! Output of given initial u,v-profiles
	76	!
[760]	77	! 759 2011-09-15 13:58:31Z raasch
	78	! output of maximum number of parallel io streams
	79	!
[708]	80	! 707 2011-03-29 11:39:40Z raasch
	81	! bc_lr/ns replaced by bc_lr/ns_cyc
	82	!
[668]	83	! 667 2010-12-23 12:06:00Z suehring/gryschka
	84	! Output of advection scheme.
	85	! Modified output of Prandtl-layer height.
	86	!
[581]	87	! 580 2010-10-05 13:59:11Z heinze
	88	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	89	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	90	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	91	!
[494]	92	! 493 2010-03-01 08:30:24Z raasch
	93	! NetCDF data output format extendend for NetCDF4/HDF5
	94	!
[482]	95	! 449 2010-02-02 11:23:59Z raasch
	96	! +large scale vertical motion (subsidence/ascent)
	97	! Bugfix: index problem concerning gradient_level indices removed
	98	!
[449]	99	! 410 2009-12-04 17:05:40Z letzel
	100	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	101	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	102	!
[392]	103	! 346 2009-07-06 10:13:41Z raasch
[328]	104	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	105	! Coupling with independent precursor runs.
[254]	106	! Output of messages replaced by message handling routine.
[336]	107	! Output of several additional dvr parameters
[240]	108	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	109	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	110	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	111	! topography_grid_convention moved from user_header
[292]	112	! small bugfix concerning 3d 64bit netcdf output format
[1]	113	!
[226]	114	! 206 2008-10-13 14:59:11Z raasch
	115	! Bugfix: error in zu index in case of section_xy = -1
	116	!
[200]	117	! 198 2008-09-17 08:55:28Z raasch
	118	! Format adjustments allowing output of larger revision numbers
	119	!
[198]	120	! 197 2008-09-16 15:29:03Z raasch
	121	! allow 100 spectra levels instead of 10 for consistency with
	122	! define_netcdf_header,
	123	! bugfix in the output of the characteristic levels of potential temperature,
	124	! geostrophic wind, scalar concentration, humidity and leaf area density,
	125	! output of turbulence recycling informations
	126	!
[139]	127	! 138 2007-11-28 10:03:58Z letzel
	128	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	129	! Allow two instead of one digit to specify isosurface and slicer variables.
	130	! Output of sorting frequency of particles
	131	!
[110]	132	! 108 2007-08-24 15:10:38Z letzel
	133	! Output of informations for coupled model runs (boundary conditions etc.)
	134	! + output of momentumfluxes at the top boundary
	135	! Rayleigh damping for ocean, e_init
	136	!
[98]	137	! 97 2007-06-21 08:23:15Z raasch
	138	! Adjustments for the ocean version.
	139	! use_pt_reference renamed use_reference
	140	!
[90]	141	! 87 2007-05-22 15:46:47Z raasch
	142	! Bugfix: output of use_upstream_for_tke
	143	!
[83]	144	! 82 2007-04-16 15:40:52Z raasch
	145	! Preprocessor strings for different linux clusters changed to "lc",
	146	! routine local_flush is used for buffer flushing
	147	!
[77]	148	! 76 2007-03-29 00:58:32Z raasch
	149	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	150	! output of the loop optimization method, moisture renamed humidity,
	151	! output of subversion revision number
	152	!
[39]	153	! 19 2007-02-23 04:53:48Z raasch
	154	! Output of scalar flux applied at top boundary
	155	!
[3]	156	! RCS Log replace by Id keyword, revision history cleaned up
	157	!
[1]	158	! Revision 1.63 2006/08/22 13:53:13 raasch
	159	! Output of dz_max
	160	!
	161	! Revision 1.1 1997/08/11 06:17:20 raasch
	162	! Initial revision
	163	!
	164	!
	165	! Description:
	166	! ------------
	167	! Writing a header with all important informations about the actual run.
	168	! This subroutine is called three times, two times at the beginning
	169	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	170	! end of the run, then writing additional information about CPU-usage on file
	171	! header.
[411]	172	!-----------------------------------------------------------------------------!
[1]	173
	174	USE arrays_3d
	175	USE control_parameters
	176	USE cloud_parameters
	177	USE cpulog
	178	USE dvrp_variables
	179	USE grid_variables
	180	USE indices
	181	USE model_1d
	182	USE particle_attributes
	183	USE pegrid
[411]	184	USE subsidence_mod
[1]	185	USE spectrum
	186
	187	IMPLICIT NONE
	188
	189	CHARACTER (LEN=1) :: prec
	190	CHARACTER (LEN=2) :: do2d_mode
	191	CHARACTER (LEN=5) :: section_chr
	192	CHARACTER (LEN=10) :: coor_chr, host_chr
	193	CHARACTER (LEN=16) :: begin_chr
[200]	194	CHARACTER (LEN=23) :: ver_rev
[1]	195	CHARACTER (LEN=40) :: output_format
[167]	196	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	197	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	198	domask_chr, run_classification
[167]	199	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	200	temperatures, ugcomponent, vgcomponent
[1]	201	CHARACTER (LEN=85) :: roben, runten
	202
[410]	203	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	204
	205	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	206	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	207	REAL :: cpuseconds_per_simulated_second
	208
	209	!
	210	!-- Open the output file. At the end of the simulation, output is directed
	211	!-- to unit 19.
	212	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	213	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	214	io = 15 ! header output on file RUN_CONTROL
	215	ELSE
	216	io = 19 ! header output on file HEADER
	217	ENDIF
	218	CALL check_open( io )
	219
	220	!
	221	!-- At the end of the run, output file (HEADER) will be rewritten with
	222	!-- new informations
	223	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	224
	225	!
	226	!-- Determine kind of model run
	227	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	228	run_classification = '3D - restart run'
[328]	229	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	230	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	231	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	232	run_classification = '3D - run without 1D - prerun'
[197]	233	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	234	run_classification = '3D - run with 1D - prerun'
[197]	235	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	236	run_classification = '3D - run initialized by user'
[1]	237	ELSE
[254]	238	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	239	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	240	ENDIF
[97]	241	IF ( ocean ) THEN
	242	run_classification = 'ocean - ' // run_classification
	243	ELSE
	244	run_classification = 'atmosphere - ' // run_classification
	245	ENDIF
[1]	246
	247	!
	248	!-- Run-identification, date, time, host
	249	host_chr = host(1:10)
[75]	250	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	251	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	252	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	253	#if defined( __mpi2 )
	254	mpi_type = 2
	255	#else
	256	mpi_type = 1
	257	#endif
	258	WRITE ( io, 101 ) mpi_type, coupling_mode
	259	ENDIF
[102]	260	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	261	ADJUSTR( host_chr )
[1]	262	#if defined( __parallel )
	263	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	264	char1 = 'calculated'
	265	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	266	host(1:2) == 'lc' ) .AND. &
	267	npex == -1 .AND. pdims(2) == 1 ) THEN
	268	char1 = 'forced'
	269	ELSE
	270	char1 = 'predefined'
	271	ENDIF
	272	IF ( threads_per_task == 1 ) THEN
[102]	273	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	274	ELSE
[102]	275	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	276	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	277	ENDIF
	278	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	279	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	280	npex == -1 .AND. pdims(2) == 1 ) &
	281	THEN
[102]	282	WRITE ( io, 106 )
[1]	283	ELSEIF ( pdims(2) == 1 ) THEN
[102]	284	WRITE ( io, 107 ) 'x'
[1]	285	ELSEIF ( pdims(1) == 1 ) THEN
[102]	286	WRITE ( io, 107 ) 'y'
[1]	287	ENDIF
[102]	288	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	289	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	290	WRITE ( io, 108 ) maximum_parallel_io_streams
	291	ENDIF
[1]	292	#endif
	293	WRITE ( io, 99 )
	294
	295	!
	296	!-- Numerical schemes
	297	WRITE ( io, 110 )
	298	IF ( psolver(1:7) == 'poisfft' ) THEN
	299	WRITE ( io, 111 ) TRIM( fft_method )
	300	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	301	ELSEIF ( psolver == 'sor' ) THEN
	302	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	303	ELSEIF ( psolver == 'multigrid' ) THEN
	304	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	305	IF ( mg_cycles == -1 ) THEN
	306	WRITE ( io, 140 ) residual_limit
	307	ELSE
	308	WRITE ( io, 141 ) mg_cycles
	309	ENDIF
	310	IF ( mg_switch_to_pe0_level == 0 ) THEN
	311	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	312	nzt_mg(1)
[197]	313	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	314	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	315	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	316	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	317	nzt_mg(mg_switch_to_pe0_level), &
	318	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	319	nzt_mg(1)
	320	ENDIF
[927]	321	IF ( masking_method ) WRITE ( io, 144 )
[1]	322	ENDIF
	323	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	324	THEN
	325	WRITE ( io, 142 )
	326	ENDIF
	327
	328	IF ( momentum_advec == 'pw-scheme' ) THEN
	329	WRITE ( io, 113 )
[667]	330	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	331	WRITE ( io, 503 )
[1]	332	ENDIF
	333	IF ( scalar_advec == 'pw-scheme' ) THEN
	334	WRITE ( io, 116 )
[667]	335	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	336	WRITE ( io, 504 )
[1]	337	ELSE
	338	WRITE ( io, 118 )
	339	ENDIF
[63]	340
	341	WRITE ( io, 139 ) TRIM( loop_optimization )
	342
[1]	343	IF ( galilei_transformation ) THEN
	344	IF ( use_ug_for_galilei_tr ) THEN
[868]	345	char1 = '0.6 * geostrophic wind'
[1]	346	ELSE
	347	char1 = 'mean wind in model domain'
	348	ENDIF
	349	IF ( simulated_time_at_begin == simulated_time ) THEN
	350	char2 = 'at the start of the run'
	351	ELSE
	352	char2 = 'at the end of the run'
	353	ENDIF
	354	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	355	advected_distance_x/1000.0, advected_distance_y/1000.0
	356	ENDIF
[1001]	357	WRITE ( io, 122 ) timestep_scheme
[87]	358	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	359	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	360	IF ( .NOT. ocean ) THEN
	361	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	362	rayleigh_damping_factor
	363	ELSE
	364	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	365	rayleigh_damping_factor
	366	ENDIF
[1]	367	ENDIF
[940]	368	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	369	IF ( humidity ) THEN
[1]	370	IF ( .NOT. cloud_physics ) THEN
	371	WRITE ( io, 129 )
	372	ELSE
	373	WRITE ( io, 130 )
	374	ENDIF
	375	ENDIF
	376	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	377	IF ( conserve_volume_flow ) THEN
[241]	378	WRITE ( io, 150 ) conserve_volume_flow_mode
	379	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	380	WRITE ( io, 151 ) u_bulk, v_bulk
	381	ENDIF
[240]	382	ELSEIF ( dp_external ) THEN
	383	IF ( dp_smooth ) THEN
[241]	384	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	385	ELSE
[241]	386	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	387	ENDIF
	388	ENDIF
[411]	389	IF ( large_scale_subsidence ) THEN
	390	WRITE ( io, 153 )
	391	WRITE ( io, 154 )
	392	ENDIF
[1]	393	WRITE ( io, 99 )
	394
	395	!
	396	!-- Runtime and timestep informations
	397	WRITE ( io, 200 )
	398	IF ( .NOT. dt_fixed ) THEN
	399	WRITE ( io, 201 ) dt_max, cfl_factor
	400	ELSE
	401	WRITE ( io, 202 ) dt
	402	ENDIF
	403	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	404
	405	IF ( time_restart /= 9999999.9 .AND. &
	406	simulated_time_at_begin == simulated_time ) THEN
	407	IF ( dt_restart == 9999999.9 ) THEN
	408	WRITE ( io, 204 ) ' Restart at: ',time_restart
	409	ELSE
	410	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	411	ENDIF
	412	ENDIF
	413
	414	IF ( simulated_time_at_begin /= simulated_time ) THEN
	415	i = MAX ( log_point_s(10)%counts, 1 )
	416	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	417	cpuseconds_per_simulated_second = 0.0
	418	ELSE
	419	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	420	( simulated_time - &
	421	simulated_time_at_begin )
	422	ENDIF
	423	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	424	log_point_s(10)%sum / REAL( i ), &
	425	cpuseconds_per_simulated_second
	426	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	427	IF ( dt_restart == 9999999.9 ) THEN
	428	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	429	ELSE
	430	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	431	ENDIF
	432	ENDIF
	433	ENDIF
	434
	435	!
[291]	436	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	437	!-- and ocean are used. In this case, coupling_start_time defines the time
	438	!-- when the coupling is switched on.
	439	IF ( coupling_start_time /= 0.0 ) THEN
	440	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	441	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	442	ELSE
	443	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	444	'precursor runs'
	445	ENDIF
	446	WRITE ( io, 207 ) char1, coupling_start_time
	447	ENDIF
	448
	449	!
[1]	450	!-- Computational grid
[94]	451	IF ( .NOT. ocean ) THEN
	452	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	453	IF ( dz_stretch_level_index < nzt+1 ) THEN
	454	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	455	dz_stretch_factor, dz_max
	456	ENDIF
	457	ELSE
	458	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	459	IF ( dz_stretch_level_index > 0 ) THEN
	460	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	461	dz_stretch_factor, dz_max
	462	ENDIF
[1]	463	ENDIF
	464	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	465	MIN( nnz+2, nzt+2 )
	466	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	467
	468	!
	469	!-- Topography
	470	WRITE ( io, 270 ) topography
	471	SELECT CASE ( TRIM( topography ) )
	472
	473	CASE ( 'flat' )
	474	! no actions necessary
	475
	476	CASE ( 'single_building' )
	477	blx = INT( building_length_x / dx )
	478	bly = INT( building_length_y / dy )
	479	bh = INT( building_height / dz )
	480
	481	IF ( building_wall_left == 9999999.9 ) THEN
	482	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	483	ENDIF
	484	bxl = INT ( building_wall_left / dx + 0.5 )
	485	bxr = bxl + blx
	486
	487	IF ( building_wall_south == 9999999.9 ) THEN
	488	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	489	ENDIF
	490	bys = INT ( building_wall_south / dy + 0.5 )
	491	byn = bys + bly
	492
	493	WRITE ( io, 271 ) building_length_x, building_length_y, &
	494	building_height, bxl, bxr, bys, byn
	495
[240]	496	CASE ( 'single_street_canyon' )
	497	ch = NINT( canyon_height / dz )
	498	IF ( canyon_width_x /= 9999999.9 ) THEN
	499	!
	500	!-- Street canyon in y direction
	501	cwx = NINT( canyon_width_x / dx )
	502	IF ( canyon_wall_left == 9999999.9 ) THEN
	503	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	504	ENDIF
	505	cxl = NINT( canyon_wall_left / dx )
	506	cxr = cxl + cwx
	507	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	508
	509	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	510	!
	511	!-- Street canyon in x direction
	512	cwy = NINT( canyon_width_y / dy )
	513	IF ( canyon_wall_south == 9999999.9 ) THEN
	514	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	515	ENDIF
	516	cys = NINT( canyon_wall_south / dy )
	517	cyn = cys + cwy
	518	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	519	ENDIF
	520
[1]	521	END SELECT
	522
[256]	523	IF ( TRIM( topography ) /= 'flat' ) THEN
	524	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	525	IF ( TRIM( topography ) == 'single_building' .OR. &
	526	TRIM( topography ) == 'single_street_canyon' ) THEN
	527	WRITE ( io, 278 )
	528	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	529	WRITE ( io, 279 )
	530	ENDIF
	531	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	532	WRITE ( io, 278 )
	533	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	534	WRITE ( io, 279 )
	535	ENDIF
	536	ENDIF
	537
[138]	538	IF ( plant_canopy ) THEN
	539
	540	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	541	IF ( passive_scalar ) THEN
	542	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	543	leaf_surface_concentration
	544	ENDIF
[138]	545
[1]	546	!
[153]	547	!-- Heat flux at the top of vegetation
	548	WRITE ( io, 282 ) cthf
	549
	550	!
[138]	551	!-- Leaf area density profile
	552	!-- Building output strings, starting with surface value
[833]	553	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	554	gradients = '------'
	555	slices = ' 0'
	556	coordinates = ' 0.0'
	557	i = 1
	558	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	559
	560	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	561	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	562
	563	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	564	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	565
	566	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	567	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	568
	569	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	570	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	571
	572	i = i + 1
	573	ENDDO
	574
[153]	575	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	576	TRIM( gradients ), TRIM( slices )
	577
	578	ENDIF
	579
	580	!
[1]	581	!-- Boundary conditions
	582	IF ( ibc_p_b == 0 ) THEN
	583	runten = 'p(0) = 0 \|'
	584	ELSEIF ( ibc_p_b == 1 ) THEN
	585	runten = 'p(0) = p(1) \|'
	586	ELSE
	587	runten = 'p(0) = p(1) +R\|'
	588	ENDIF
	589	IF ( ibc_p_t == 0 ) THEN
	590	roben = 'p(nzt+1) = 0 \|'
	591	ELSE
	592	roben = 'p(nzt+1) = p(nzt) \|'
	593	ENDIF
	594
	595	IF ( ibc_uv_b == 0 ) THEN
	596	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	597	ELSE
	598	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	599	ENDIF
[132]	600	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	601	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	602	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	603	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	604	ELSE
	605	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	606	ENDIF
	607
	608	IF ( ibc_pt_b == 0 ) THEN
	609	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	610	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	611	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	612	ELSEIF ( ibc_pt_b == 2 ) THEN
	613	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	614	ENDIF
	615	IF ( ibc_pt_t == 0 ) THEN
[19]	616	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	617	ELSEIF( ibc_pt_t == 1 ) THEN
	618	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	619	ELSEIF( ibc_pt_t == 2 ) THEN
	620	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	621
[1]	622	ENDIF
	623
	624	WRITE ( io, 300 ) runten, roben
	625
	626	IF ( .NOT. constant_diffusion ) THEN
	627	IF ( ibc_e_b == 1 ) THEN
	628	runten = 'e(0) = e(1)'
	629	ELSE
	630	runten = 'e(0) = e(1) = (u/0.1)*2'
	631	ENDIF
	632	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	633
[97]	634	WRITE ( io, 301 ) 'e', runten, roben
[1]	635
	636	ENDIF
	637
[97]	638	IF ( ocean ) THEN
	639	runten = 'sa(0) = sa(1)'
	640	IF ( ibc_sa_t == 0 ) THEN
	641	roben = 'sa(nzt+1) = sa_surface'
[1]	642	ELSE
[97]	643	roben = 'sa(nzt+1) = sa(nzt)'
[1]	644	ENDIF
[97]	645	WRITE ( io, 301 ) 'sa', runten, roben
	646	ENDIF
[1]	647
[97]	648	IF ( humidity ) THEN
	649	IF ( ibc_q_b == 0 ) THEN
	650	runten = 'q(0) = q_surface'
	651	ELSE
	652	runten = 'q(0) = q(1)'
	653	ENDIF
	654	IF ( ibc_q_t == 0 ) THEN
	655	roben = 'q(nzt) = q_top'
	656	ELSE
	657	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	658	ENDIF
	659	WRITE ( io, 301 ) 'q', runten, roben
	660	ENDIF
[1]	661
[97]	662	IF ( passive_scalar ) THEN
	663	IF ( ibc_q_b == 0 ) THEN
	664	runten = 's(0) = s_surface'
	665	ELSE
	666	runten = 's(0) = s(1)'
	667	ENDIF
	668	IF ( ibc_q_t == 0 ) THEN
	669	roben = 's(nzt) = s_top'
	670	ELSE
	671	roben = 's(nzt) = s(nzt-1) + ds/dz'
	672	ENDIF
	673	WRITE ( io, 301 ) 's', runten, roben
[1]	674	ENDIF
	675
	676	IF ( use_surface_fluxes ) THEN
	677	WRITE ( io, 303 )
	678	IF ( constant_heatflux ) THEN
	679	WRITE ( io, 306 ) surface_heatflux
	680	IF ( random_heatflux ) WRITE ( io, 307 )
	681	ENDIF
[75]	682	IF ( humidity .AND. constant_waterflux ) THEN
[1]	683	WRITE ( io, 311 ) surface_waterflux
	684	ENDIF
	685	IF ( passive_scalar .AND. constant_waterflux ) THEN
	686	WRITE ( io, 313 ) surface_waterflux
	687	ENDIF
	688	ENDIF
	689
[19]	690	IF ( use_top_fluxes ) THEN
	691	WRITE ( io, 304 )
[102]	692	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	693	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	694	IF ( constant_top_heatflux ) THEN
	695	WRITE ( io, 306 ) top_heatflux
	696	ENDIF
	697	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	698	WRITE ( io, 316 )
[19]	699	ENDIF
[97]	700	IF ( ocean .AND. constant_top_salinityflux ) THEN
	701	WRITE ( io, 309 ) top_salinityflux
	702	ENDIF
[75]	703	IF ( humidity .OR. passive_scalar ) THEN
[19]	704	WRITE ( io, 315 )
	705	ENDIF
	706	ENDIF
	707
[1]	708	IF ( prandtl_layer ) THEN
[978]	709	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	710	z0h_factor*roughness_length, kappa, &
[94]	711	rif_min, rif_max
[1]	712	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	713	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	714	WRITE ( io, 312 )
	715	ENDIF
	716	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	717	WRITE ( io, 314 )
	718	ENDIF
	719	ELSE
	720	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	721	WRITE ( io, 310 ) rif_min, rif_max
	722	ENDIF
	723	ENDIF
	724
	725	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	726	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	727	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	728	IF ( turbulent_inflow ) THEN
	729	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	730	inflow_damping_height, inflow_damping_width
	731	ENDIF
[1]	732	ENDIF
	733
	734	!
	735	!-- Listing of 1D-profiles
[151]	736	WRITE ( io, 325 ) dt_dopr_listing
[1]	737	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	738	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	739	ENDIF
	740
	741	!
	742	!-- DATA output
	743	WRITE ( io, 330 )
	744	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	745	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	746	ENDIF
	747
	748	!
	749	!-- 1D-profiles
[346]	750	dopr_chr = 'Profile:'
[1]	751	IF ( dopr_n /= 0 ) THEN
	752	WRITE ( io, 331 )
	753
	754	output_format = ''
	755	IF ( netcdf_output ) THEN
[1031]	756	output_format = output_format_netcdf
[1]	757	ENDIF
[292]	758	WRITE ( io, 344 ) output_format
[1]	759
	760	DO i = 1, dopr_n
	761	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	762	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	763	WRITE ( io, 332 ) dopr_chr
	764	dopr_chr = ' :'
	765	ENDIF
	766	ENDDO
	767
	768	IF ( dopr_chr /= '' ) THEN
	769	WRITE ( io, 332 ) dopr_chr
	770	ENDIF
	771	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	772	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	773	ENDIF
	774
	775	!
	776	!-- 2D-arrays
	777	DO av = 0, 1
	778
	779	i = 1
	780	do2d_xy = ''
	781	do2d_xz = ''
	782	do2d_yz = ''
	783	DO WHILE ( do2d(av,i) /= ' ' )
	784
	785	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	786	do2d_mode = do2d(av,i)(l-1:l)
	787
	788	SELECT CASE ( do2d_mode )
	789	CASE ( 'xy' )
	790	ll = LEN_TRIM( do2d_xy )
	791	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	792	CASE ( 'xz' )
	793	ll = LEN_TRIM( do2d_xz )
	794	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	795	CASE ( 'yz' )
	796	ll = LEN_TRIM( do2d_yz )
	797	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	798	END SELECT
	799
	800	i = i + 1
	801
	802	ENDDO
	803
	804	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	805	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	806	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	807	( netcdf_output .OR. iso2d_output ) ) THEN
	808
	809	IF ( av == 0 ) THEN
	810	WRITE ( io, 334 ) ''
	811	ELSE
	812	WRITE ( io, 334 ) '(time-averaged)'
	813	ENDIF
	814
	815	IF ( do2d_at_begin ) THEN
	816	begin_chr = 'and at the start'
	817	ELSE
	818	begin_chr = ''
	819	ENDIF
	820
	821	output_format = ''
	822	IF ( netcdf_output ) THEN
[1031]	823	output_format = output_format_netcdf
[1]	824	ENDIF
	825	IF ( iso2d_output ) THEN
	826	IF ( netcdf_output ) THEN
[1031]	827	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	828	ELSE
	829	output_format = 'iso2d'
	830	ENDIF
	831	ENDIF
[292]	832	WRITE ( io, 344 ) output_format
[1]	833
	834	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	835	i = 1
	836	slices = '/'
	837	coordinates = '/'
	838	!
	839	!-- Building strings with index and coordinate informations of the
	840	!-- slices
	841	DO WHILE ( section(i,1) /= -9999 )
	842
	843	WRITE (section_chr,'(I5)') section(i,1)
	844	section_chr = ADJUSTL( section_chr )
	845	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	846
[206]	847	IF ( section(i,1) == -1 ) THEN
	848	WRITE (coor_chr,'(F10.1)') -1.0
	849	ELSE
	850	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	851	ENDIF
[1]	852	coor_chr = ADJUSTL( coor_chr )
	853	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	854
	855	i = i + 1
	856	ENDDO
	857	IF ( av == 0 ) THEN
	858	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	859	TRIM( begin_chr ), 'k', TRIM( slices ), &
	860	TRIM( coordinates )
	861	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	862	WRITE ( io, 339 ) skip_time_do2d_xy
	863	ENDIF
	864	ELSE
	865	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	866	TRIM( begin_chr ), averaging_interval, &
	867	dt_averaging_input, 'k', TRIM( slices ), &
	868	TRIM( coordinates )
	869	IF ( skip_time_data_output_av /= 0.0 ) THEN
	870	WRITE ( io, 339 ) skip_time_data_output_av
	871	ENDIF
	872	ENDIF
	873
	874	ENDIF
	875
	876	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	877	i = 1
	878	slices = '/'
	879	coordinates = '/'
	880	!
	881	!-- Building strings with index and coordinate informations of the
	882	!-- slices
	883	DO WHILE ( section(i,2) /= -9999 )
	884
	885	WRITE (section_chr,'(I5)') section(i,2)
	886	section_chr = ADJUSTL( section_chr )
	887	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	888
	889	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	890	coor_chr = ADJUSTL( coor_chr )
	891	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	892
	893	i = i + 1
	894	ENDDO
	895	IF ( av == 0 ) THEN
	896	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	897	TRIM( begin_chr ), 'j', TRIM( slices ), &
	898	TRIM( coordinates )
	899	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	900	WRITE ( io, 339 ) skip_time_do2d_xz
	901	ENDIF
	902	ELSE
	903	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	904	TRIM( begin_chr ), averaging_interval, &
	905	dt_averaging_input, 'j', TRIM( slices ), &
	906	TRIM( coordinates )
	907	IF ( skip_time_data_output_av /= 0.0 ) THEN
	908	WRITE ( io, 339 ) skip_time_data_output_av
	909	ENDIF
	910	ENDIF
	911	ENDIF
	912
	913	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	914	i = 1
	915	slices = '/'
	916	coordinates = '/'
	917	!
	918	!-- Building strings with index and coordinate informations of the
	919	!-- slices
	920	DO WHILE ( section(i,3) /= -9999 )
	921
	922	WRITE (section_chr,'(I5)') section(i,3)
	923	section_chr = ADJUSTL( section_chr )
	924	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	925
	926	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	927	coor_chr = ADJUSTL( coor_chr )
	928	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	929
	930	i = i + 1
	931	ENDDO
	932	IF ( av == 0 ) THEN
	933	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	934	TRIM( begin_chr ), 'i', TRIM( slices ), &
	935	TRIM( coordinates )
	936	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	937	WRITE ( io, 339 ) skip_time_do2d_yz
	938	ENDIF
	939	ELSE
	940	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	941	TRIM( begin_chr ), averaging_interval, &
	942	dt_averaging_input, 'i', TRIM( slices ), &
	943	TRIM( coordinates )
	944	IF ( skip_time_data_output_av /= 0.0 ) THEN
	945	WRITE ( io, 339 ) skip_time_data_output_av
	946	ENDIF
	947	ENDIF
	948	ENDIF
	949
	950	ENDIF
	951
	952	ENDDO
	953
	954	!
	955	!-- 3d-arrays
	956	DO av = 0, 1
	957
	958	i = 1
	959	do3d_chr = ''
	960	DO WHILE ( do3d(av,i) /= ' ' )
	961
	962	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	963	i = i + 1
	964
	965	ENDDO
	966
	967	IF ( do3d_chr /= '' ) THEN
	968	IF ( av == 0 ) THEN
	969	WRITE ( io, 336 ) ''
	970	ELSE
	971	WRITE ( io, 336 ) '(time-averaged)'
	972	ENDIF
	973
	974	output_format = ''
	975	IF ( netcdf_output ) THEN
[1031]	976	output_format = output_format_netcdf
[1]	977	ENDIF
	978	IF ( avs_output ) THEN
	979	IF ( netcdf_output ) THEN
[1031]	980	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	981	ELSE
	982	output_format = 'avs'
	983	ENDIF
	984	ENDIF
[292]	985	WRITE ( io, 344 ) output_format
[1]	986
	987	IF ( do3d_at_begin ) THEN
	988	begin_chr = 'and at the start'
	989	ELSE
	990	begin_chr = ''
	991	ENDIF
	992	IF ( av == 0 ) THEN
	993	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	994	zu(nz_do3d), nz_do3d
	995	ELSE
	996	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	997	TRIM( begin_chr ), averaging_interval, &
	998	dt_averaging_input, zu(nz_do3d), nz_do3d
	999	ENDIF
	1000
	1001	IF ( do3d_compress ) THEN
	1002	do3d_chr = ''
	1003	i = 1
	1004	DO WHILE ( do3d(av,i) /= ' ' )
	1005
	1006	SELECT CASE ( do3d(av,i) )
	1007	CASE ( 'u' )
	1008	j = 1
	1009	CASE ( 'v' )
	1010	j = 2
	1011	CASE ( 'w' )
	1012	j = 3
	1013	CASE ( 'p' )
	1014	j = 4
	1015	CASE ( 'pt' )
	1016	j = 5
	1017	END SELECT
	1018	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1019	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1020	':' // prec // ','
	1021	i = i + 1
	1022
	1023	ENDDO
	1024	WRITE ( io, 338 ) do3d_chr
	1025
	1026	ENDIF
	1027
	1028	IF ( av == 0 ) THEN
	1029	IF ( skip_time_do3d /= 0.0 ) THEN
	1030	WRITE ( io, 339 ) skip_time_do3d
	1031	ENDIF
	1032	ELSE
	1033	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1034	WRITE ( io, 339 ) skip_time_data_output_av
	1035	ENDIF
	1036	ENDIF
	1037
	1038	ENDIF
	1039
	1040	ENDDO
	1041
	1042	!
[410]	1043	!-- masked arrays
	1044	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1045	mask_scale_x, mask_scale_y, mask_scale_z
	1046	DO mid = 1, masks
	1047	DO av = 0, 1
	1048
	1049	i = 1
	1050	domask_chr = ''
	1051	DO WHILE ( domask(mid,av,i) /= ' ' )
	1052	domask_chr = TRIM( domask_chr ) // ' ' // &
	1053	TRIM( domask(mid,av,i) ) // ','
	1054	i = i + 1
	1055	ENDDO
	1056
	1057	IF ( domask_chr /= '' ) THEN
	1058	IF ( av == 0 ) THEN
	1059	WRITE ( io, 346 ) '', mid
	1060	ELSE
	1061	WRITE ( io, 346 ) ' (time-averaged)', mid
	1062	ENDIF
	1063
[1031]	1064	output_format = ' '
[410]	1065	IF ( netcdf_output ) THEN
[1031]	1066	output_format = output_format_netcdf
[410]	1067	ENDIF
	1068	WRITE ( io, 344 ) output_format
	1069
	1070	IF ( av == 0 ) THEN
	1071	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1072	ELSE
	1073	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1074	averaging_interval, dt_averaging_input
	1075	ENDIF
	1076
	1077	IF ( av == 0 ) THEN
	1078	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1079	WRITE ( io, 339 ) skip_time_domask(mid)
	1080	ENDIF
	1081	ELSE
	1082	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1083	WRITE ( io, 339 ) skip_time_data_output_av
	1084	ENDIF
	1085	ENDIF
	1086	!
	1087	!-- output locations
	1088	DO dim = 1, 3
	1089	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1090	count = 0
	1091	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1092	count = count + 1
	1093	ENDDO
	1094	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1095	mask(mid,dim,:count)
	1096	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1097	mask_loop(mid,dim,2) < 0.0 .AND. &
	1098	mask_loop(mid,dim,3) == 0.0 ) THEN
	1099	WRITE ( io, 350 ) dir(dim), dir(dim)
	1100	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1101	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1102	mask_loop(mid,dim,1:2)
	1103	ELSE
	1104	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1105	mask_loop(mid,dim,1:3)
	1106	ENDIF
	1107	ENDDO
	1108	ENDIF
	1109
	1110	ENDDO
	1111	ENDDO
	1112
	1113	!
[1]	1114	!-- Timeseries
	1115	IF ( dt_dots /= 9999999.9 ) THEN
	1116	WRITE ( io, 340 )
	1117
	1118	output_format = ''
	1119	IF ( netcdf_output ) THEN
[1031]	1120	output_format = output_format_netcdf
[1]	1121	ENDIF
[292]	1122	WRITE ( io, 344 ) output_format
[1]	1123	WRITE ( io, 341 ) dt_dots
	1124	ENDIF
	1125
	1126	#if defined( __dvrp_graphics )
	1127	!
	1128	!-- Dvrp-output
	1129	IF ( dt_dvrp /= 9999999.9 ) THEN
	1130	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1131	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1132	i = 1
	1133	l = 0
[336]	1134	m = 0
[1]	1135	DO WHILE ( mode_dvrp(i) /= ' ' )
	1136	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1137	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1138	l = l + 1
	1139	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1140	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1141	isosurface_color(:,l)
[1]	1142	ENDIF
	1143	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1144	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1145	m = m + 1
	1146	IF ( do2d(0,j) /= ' ' ) THEN
	1147	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1148	slicer_range_limits_dvrp(:,m)
	1149	ENDIF
[1]	1150	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1151	WRITE ( io, 363 ) dvrp_psize
	1152	IF ( particle_dvrpsize /= 'none' ) THEN
	1153	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1154	dvrpsize_interval
	1155	ENDIF
	1156	IF ( particle_color /= 'none' ) THEN
	1157	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1158	color_interval
	1159	ENDIF
[1]	1160	ENDIF
	1161	i = i + 1
	1162	ENDDO
[237]	1163
[336]	1164	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1165	superelevation_y, superelevation, clip_dvrp_l, &
	1166	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1167
	1168	IF ( TRIM( topography ) /= 'flat' ) THEN
	1169	WRITE ( io, 366 ) topography_color
	1170	IF ( cluster_size > 1 ) THEN
	1171	WRITE ( io, 367 ) cluster_size
	1172	ENDIF
[237]	1173	ENDIF
	1174
[1]	1175	ENDIF
	1176	#endif
	1177
	1178	#if defined( __spectra )
	1179	!
	1180	!-- Spectra output
	1181	IF ( dt_dosp /= 9999999.9 ) THEN
	1182	WRITE ( io, 370 )
	1183
[1031]	1184	output_format = ' '
[1]	1185	IF ( netcdf_output ) THEN
[1031]	1186	output_format = output_format_netcdf
[1]	1187	ENDIF
[292]	1188	WRITE ( io, 344 ) output_format
[1]	1189	WRITE ( io, 371 ) dt_dosp
	1190	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1191	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1192	( spectra_direction(i), i = 1,10 ), &
[189]	1193	( comp_spectra_level(i), i = 1,100 ), &
	1194	( plot_spectra_level(i), i = 1,100 ), &
[1]	1195	averaging_interval_sp, dt_averaging_input_pr
	1196	ENDIF
	1197	#endif
	1198
	1199	WRITE ( io, 99 )
	1200
	1201	!
	1202	!-- Physical quantities
	1203	WRITE ( io, 400 )
	1204
	1205	!
	1206	!-- Geostrophic parameters
	1207	WRITE ( io, 410 ) omega, phi, f, fs
	1208
	1209	!
	1210	!-- Other quantities
	1211	WRITE ( io, 411 ) g
[97]	1212	IF ( use_reference ) THEN
	1213	IF ( ocean ) THEN
	1214	WRITE ( io, 412 ) prho_reference
	1215	ELSE
	1216	WRITE ( io, 413 ) pt_reference
	1217	ENDIF
	1218	ENDIF
[1]	1219
	1220	!
	1221	!-- Cloud physics parameters
	1222	IF ( cloud_physics ) THEN
[57]	1223	WRITE ( io, 415 )
	1224	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1225	ENDIF
	1226
	1227	!-- Profile of the geostrophic wind (component ug)
	1228	!-- Building output strings
	1229	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1230	gradients = '------'
	1231	slices = ' 0'
	1232	coordinates = ' 0.0'
	1233	i = 1
	1234	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1235
[167]	1236	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1237	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1238
[167]	1239	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1240	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1241
[167]	1242	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1243	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1244
[167]	1245	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1246	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1247
[430]	1248	IF ( i == 10 ) THEN
	1249	EXIT
	1250	ELSE
	1251	i = i + 1
	1252	ENDIF
	1253
[1]	1254	ENDDO
	1255
	1256	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1257	TRIM( gradients ), TRIM( slices )
	1258
	1259	!-- Profile of the geostrophic wind (component vg)
	1260	!-- Building output strings
	1261	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1262	gradients = '------'
	1263	slices = ' 0'
	1264	coordinates = ' 0.0'
	1265	i = 1
	1266	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1267
[167]	1268	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1269	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1272	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1273
[167]	1274	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1275	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1276
[167]	1277	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1278	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1279
[430]	1280	IF ( i == 10 ) THEN
	1281	EXIT
	1282	ELSE
	1283	i = i + 1
	1284	ENDIF
	1285
[1]	1286	ENDDO
	1287
	1288	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1289	TRIM( gradients ), TRIM( slices )
	1290
	1291	!
[767]	1292	!-- Initial wind profiles
	1293	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1294
	1295	!
[1]	1296	!-- Initial temperature profile
	1297	!-- Building output strings, starting with surface temperature
	1298	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1299	gradients = '------'
	1300	slices = ' 0'
	1301	coordinates = ' 0.0'
	1302	i = 1
	1303	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1304
[94]	1305	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1306	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1307
[94]	1308	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1309	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1310
[94]	1311	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1312	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1313
[94]	1314	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1315	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1316
[430]	1317	IF ( i == 10 ) THEN
	1318	EXIT
	1319	ELSE
	1320	i = i + 1
	1321	ENDIF
	1322
[1]	1323	ENDDO
	1324
	1325	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1326	TRIM( gradients ), TRIM( slices )
	1327
	1328	!
	1329	!-- Initial humidity profile
	1330	!-- Building output strings, starting with surface humidity
[75]	1331	IF ( humidity .OR. passive_scalar ) THEN
[1]	1332	WRITE ( temperatures, '(E8.1)' ) q_surface
	1333	gradients = '--------'
	1334	slices = ' 0'
	1335	coordinates = ' 0.0'
	1336	i = 1
	1337	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1338
	1339	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1340	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1341
	1342	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1343	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1344
	1345	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1346	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1347
	1348	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1349	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1350
[430]	1351	IF ( i == 10 ) THEN
	1352	EXIT
	1353	ELSE
	1354	i = i + 1
	1355	ENDIF
	1356
[1]	1357	ENDDO
	1358
[75]	1359	IF ( humidity ) THEN
[1]	1360	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1361	TRIM( gradients ), TRIM( slices )
	1362	ELSE
	1363	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1364	TRIM( gradients ), TRIM( slices )
	1365	ENDIF
	1366	ENDIF
	1367
	1368	!
[97]	1369	!-- Initial salinity profile
	1370	!-- Building output strings, starting with surface salinity
	1371	IF ( ocean ) THEN
	1372	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1373	gradients = '------'
	1374	slices = ' 0'
	1375	coordinates = ' 0.0'
	1376	i = 1
	1377	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1378
	1379	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1380	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1381
	1382	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1383	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1384
	1385	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1386	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1387
	1388	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1389	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1390
[430]	1391	IF ( i == 10 ) THEN
	1392	EXIT
	1393	ELSE
	1394	i = i + 1
	1395	ENDIF
	1396
[97]	1397	ENDDO
	1398
	1399	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1400	TRIM( gradients ), TRIM( slices )
	1401	ENDIF
	1402
	1403	!
[411]	1404	!-- Profile for the large scale vertial velocity
	1405	!-- Building output strings, starting with surface value
	1406	IF ( large_scale_subsidence ) THEN
	1407	temperatures = ' 0.0'
	1408	gradients = '------'
	1409	slices = ' 0'
	1410	coordinates = ' 0.0'
	1411	i = 1
[580]	1412	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1413
	1414	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1415	w_subs(subs_vertical_gradient_level_i(i))
[411]	1416	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1417
[580]	1418	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1419	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1420
[580]	1421	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1422	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1423
[580]	1424	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1425	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1426
[430]	1427	IF ( i == 10 ) THEN
	1428	EXIT
	1429	ELSE
	1430	i = i + 1
	1431	ENDIF
	1432
[411]	1433	ENDDO
	1434
	1435	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1436	TRIM( gradients ), TRIM( slices )
	1437	ENDIF
	1438
	1439	!
[824]	1440	!-- Cloud physcis parameters / quantities / numerical methods
	1441	WRITE ( io, 430 )
	1442	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1443	WRITE ( io, 431 )
	1444	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1445	WRITE ( io, 432 )
	1446	IF ( radiation ) WRITE ( io, 132 )
	1447	IF ( precipitation ) WRITE ( io, 133 )
	1448	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1449	WRITE ( io, 433 )
	1450	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1451	IF ( collision_kernel /= 'none' ) THEN
	1452	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1453	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1454	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1455	ENDIF
[825]	1456	ELSE
[828]	1457	WRITE ( io, 437 )
[825]	1458	ENDIF
[824]	1459	ENDIF
	1460
	1461	!
[1]	1462	!-- LES / turbulence parameters
	1463	WRITE ( io, 450 )
	1464
	1465	!--
	1466	! ... LES-constants used must still be added here
	1467	!--
	1468	IF ( constant_diffusion ) THEN
	1469	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1470	prandtl_number
	1471	ENDIF
	1472	IF ( .NOT. constant_diffusion) THEN
[108]	1473	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1474	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1475	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1476	ENDIF
	1477
	1478	!
	1479	!-- Special actions during the run
	1480	WRITE ( io, 470 )
	1481	IF ( create_disturbances ) THEN
	1482	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1483	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1484	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1485	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1486	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1487	ELSE
	1488	WRITE ( io, 473 ) disturbance_energy_limit
	1489	ENDIF
	1490	WRITE ( io, 474 ) TRIM( random_generator )
	1491	ENDIF
	1492	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1493	WRITE ( io, 475 ) pt_surface_initial_change
	1494	ENDIF
[75]	1495	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1496	WRITE ( io, 476 ) q_surface_initial_change
	1497	ENDIF
	1498	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1499	WRITE ( io, 477 ) q_surface_initial_change
	1500	ENDIF
	1501
[60]	1502	IF ( particle_advection ) THEN
[1]	1503	!
[60]	1504	!-- Particle attributes
	1505	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1506	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1507	end_time_prel, dt_sort_particles
[60]	1508	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1509	IF ( random_start_position ) WRITE ( io, 481 )
	1510	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1511	WRITE ( io, 495 ) total_number_of_particles
[824]	1512	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1513	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1514	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1515	WRITE ( io, 484 ) total_number_of_tails, &
	1516	minimum_tailpoint_distance, &
	1517	maximum_tailpoint_age
	1518	ENDIF
[1]	1519	ENDIF
[60]	1520	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1521	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1522	output_format = ' '
[60]	1523	IF ( netcdf_output ) THEN
[493]	1524	IF ( netcdf_data_format > 1 ) THEN
[60]	1525	output_format = 'netcdf (64 bit offset) and binary'
	1526	ELSE
	1527	output_format = 'netcdf and binary'
	1528	ENDIF
[1]	1529	ELSE
[60]	1530	output_format = 'binary'
[1]	1531	ENDIF
[292]	1532	WRITE ( io, 344 ) output_format
[1]	1533	ENDIF
[60]	1534	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1535	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1536
[60]	1537	WRITE ( io, 487 ) number_of_particle_groups
[1]	1538
[60]	1539	DO i = 1, number_of_particle_groups
	1540	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1541	WRITE ( io, 490 ) i, 0.0
	1542	WRITE ( io, 492 )
[1]	1543	ELSE
[60]	1544	WRITE ( io, 490 ) i, radius(i)
	1545	IF ( density_ratio(i) /= 0.0 ) THEN
	1546	WRITE ( io, 491 ) density_ratio(i)
	1547	ELSE
	1548	WRITE ( io, 492 )
	1549	ENDIF
[1]	1550	ENDIF
[60]	1551	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1552	pdx(i), pdy(i), pdz(i)
[336]	1553	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1554	ENDDO
[1]	1555
[60]	1556	ENDIF
[1]	1557
[60]	1558
[1]	1559	!
	1560	!-- Parameters of 1D-model
	1561	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1562	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1563	mixing_length_1d, dissipation_1d
	1564	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1565	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1566	ENDIF
	1567	ENDIF
	1568
	1569	!
	1570	!-- User-defined informations
	1571	CALL user_header( io )
	1572
	1573	WRITE ( io, 99 )
	1574
	1575	!
	1576	!-- Write buffer contents to disc immediately
[82]	1577	CALL local_flush( io )
[1]	1578
	1579	!
	1580	!-- Here the FORMATs start
	1581
	1582	99 FORMAT (1X,78('-'))
[200]	1583	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1584	1X,'* ',A,' *',9X,A/ &
	1585	1X,'***************************',9X,42('-'))
[291]	1586	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1587	37X,42('-'))
[200]	1588	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1589	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1590	' Run on host: ',A10)
[1]	1591	#if defined( __parallel )
[200]	1592	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1593	')',1X,A)
[200]	1594	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1595	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1596	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1597	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1598	37X,'because the job is running on an SMP-cluster')
[102]	1599	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1600	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1601	#endif
	1602	110 FORMAT (/' Numerical Schemes:'/ &
	1603	' -----------------'/)
	1604	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1605	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1606	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1607	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1608	' or Upstream')
	1609	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1610	' or Upstream')
	1611	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1612	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1613	' Translation velocity = ',A/ &
	1614	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1615	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1616	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1617	' maximum damping coefficient: ',F5.3, ' 1/s')
	1618	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1619	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1620	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1621	F6.2, ' K assumed')
[824]	1622	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1623	' effective emissivity scheme')
[824]	1624	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1625	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1626	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1627	A,'-cycle)'/ &
	1628	' number of grid levels: ',I2/ &
	1629	' Gauss-Seidel red/black iterations: ',I2)
	1630	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1631	I3,')')
	1632	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1633	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1634	I3,')'/ &
	1635	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1636	I3,')')
	1637	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1638	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1639	140 FORMAT (' maximum residual allowed: ',E10.3)
	1640	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1641	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1642	'step')
[87]	1643	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1644	'kinetic energy')
[927]	1645	144 FORMAT (' masking method is used')
[1]	1646	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1647	'conserved'/ &
	1648	' using the ',A,' mode')
	1649	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1650	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1651	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1652	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1653	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1654	'prognostic equation for')
	1655	154 FORMAT (' the potential temperature')
[1]	1656	200 FORMAT (//' Run time and time step information:'/ &
	1657	' ----------------------------------'/)
	1658	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1659	' CFL-factor: ',F4.2)
	1660	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1661	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1662	' End time: ',F9.3,' s')
	1663	204 FORMAT ( A,F9.3,' s')
	1664	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1665	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1666	' CPU-time used: ',F9.3,' s per timestep: ', &
	1667	' ',F9.3,' s'/ &
	1668	' per second of simulated tim', &
	1669	'e: ',F9.3,' s')
[291]	1670	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1671	250 FORMAT (//' Computational grid and domain size:'/ &
	1672	' ----------------------------------'// &
	1673	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1674	' m dz = ',F7.3,' m'/ &
	1675	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1676	' m z(u) = ',F10.3,' m'/)
	1677	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1678	' factor: ',F5.3/ &
	1679	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1680	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1681	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1682	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1683	' degrees')
	1684	270 FORMAT (//' Topography informations:'/ &
	1685	' -----------------------'// &
	1686	1X,'Topography: ',A)
	1687	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1688	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1689	' / ',I4)
[240]	1690	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1691	' direction' / &
	1692	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1693	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1694	278 FORMAT (' Topography grid definition convention:'/ &
	1695	' cell edge (staggered grid points'/ &
	1696	' (u in x-direction, v in y-direction))' /)
	1697	279 FORMAT (' Topography grid definition convention:'/ &
	1698	' cell center (scalar grid points)' /)
[138]	1699	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1700	' ------------------------------'// &
	1701	' Canopy mode: ', A / &
	1702	' Canopy top: ',I4 / &
	1703	' Leaf drag coefficient: ',F6.2 /)
[153]	1704	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1705	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1706	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1707	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1708	' Height: ',A,' m'/ &
	1709	' Leaf area density: ',A,' m2/m3'/ &
	1710	' Gradient: ',A,' m2/m4'/ &
	1711	' Gridpoint: ',A)
	1712
[1]	1713	300 FORMAT (//' Boundary conditions:'/ &
	1714	' -------------------'// &
	1715	' p uv ', &
	1716	' pt'// &
	1717	' B. bound.: ',A/ &
	1718	' T. bound.: ',A)
[97]	1719	301 FORMAT (/' ',A// &
[1]	1720	' B. bound.: ',A/ &
	1721	' T. bound.: ',A)
[19]	1722	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1723	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1724	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1725	'computational u,v-level:'// &
[978]	1726	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1727	' m kappa = ',F4.2/ &
[1]	1728	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1729	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1730	307 FORMAT (' Heatflux has a random normal distribution')
	1731	308 FORMAT (' Predefined surface temperature')
[97]	1732	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1733	310 FORMAT (//' 1D-Model:'// &
	1734	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1735	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1736	312 FORMAT (' Predefined surface humidity')
	1737	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1738	314 FORMAT (' Predefined scalar value at the surface')
[19]	1739	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1740	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1741	'atmosphere model')
[1]	1742	317 FORMAT (//' Lateral boundaries:'/ &
	1743	' left/right: ',A/ &
	1744	' north/south: ',A)
[978]	1745	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1746	'damping factor = ',F6.4)
[151]	1747	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1748	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1749	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1750	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1751	' v: ',F9.6,' m2/s2')
[151]	1752	325 FORMAT (//' List output:'/ &
[1]	1753	' -----------'// &
	1754	' 1D-Profiles:'/ &
	1755	' Output every ',F8.2,' s')
[151]	1756	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1757	' Averaging input every ',F8.2,' s')
	1758	330 FORMAT (//' Data output:'/ &
	1759	' -----------'/)
	1760	331 FORMAT (/' 1D-Profiles:')
	1761	332 FORMAT (/' ',A)
	1762	333 FORMAT (' Output every ',F8.2,' s',/ &
	1763	' Time averaged over ',F8.2,' s'/ &
	1764	' Averaging input every ',F8.2,' s')
	1765	334 FORMAT (/' 2D-Arrays',A,':')
	1766	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1767	' Output every ',F8.2,' s ',A/ &
	1768	' Cross sections at ',A1,' = ',A/ &
	1769	' scalar-coordinates: ',A,' m'/)
	1770	336 FORMAT (/' 3D-Arrays',A,':')
	1771	337 FORMAT (/' Arrays: ',A/ &
	1772	' Output every ',F8.2,' s ',A/ &
	1773	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1774	338 FORMAT (' Compressed data output'/ &
	1775	' Decimal precision: ',A/)
	1776	339 FORMAT (' No output during initial ',F8.2,' s')
	1777	340 FORMAT (/' Time series:')
	1778	341 FORMAT (' Output every ',F8.2,' s'/)
	1779	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1780	' Output every ',F8.2,' s ',A/ &
	1781	' Time averaged over ',F8.2,' s'/ &
	1782	' Averaging input every ',F8.2,' s'/ &
	1783	' Cross sections at ',A1,' = ',A/ &
	1784	' scalar-coordinates: ',A,' m'/)
	1785	343 FORMAT (/' Arrays: ',A/ &
	1786	' Output every ',F8.2,' s ',A/ &
	1787	' Time averaged over ',F8.2,' s'/ &
	1788	' Averaging input every ',F8.2,' s'/ &
	1789	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1790	344 FORMAT (' Output format: ',A/)
[410]	1791	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1792	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1793	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1794	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1795	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1796	347 FORMAT (' Variables: ',A/ &
	1797	' Output every ',F8.2,' s')
	1798	348 FORMAT (' Variables: ',A/ &
	1799	' Output every ',F8.2,' s'/ &
	1800	' Time averaged over ',F8.2,' s'/ &
	1801	' Averaging input every ',F8.2,' s')
	1802	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1803	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1804	13(' ',8(F8.2,',')/) )
	1805	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1806	'all gridpoints along ',A,'-direction (default).' )
	1807	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1808	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1809	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1810	#if defined( __dvrp_graphics )
	1811	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1812	' Output every ',F7.1,' s'/ &
	1813	' Output mode: ',A/ &
	1814	' Host / User: ',A,' / ',A/ &
	1815	' Directory: ',A// &
	1816	' The sequence contains:')
[337]	1817	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1818	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1819	362 FORMAT (/' Slicer plane ',A/ &
[336]	1820	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1821	363 FORMAT (/' Particles'/ &
[336]	1822	' particle size: ',F7.2,' m')
	1823	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1824	F6.2,',',F6.2,']')
[337]	1825	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1826	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1827	')'/ &
	1828	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1829	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1830	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1831	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1832	#endif
	1833	#if defined( __spectra )
	1834	370 FORMAT (' Spectra:')
	1835	371 FORMAT (' Output every ',F7.1,' s'/)
	1836	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1837	' Directions: ', 10(A5,',')/ &
[189]	1838	' height levels k = ', 20(I3,',')/ &
	1839	' ', 20(I3,',')/ &
	1840	' ', 20(I3,',')/ &
	1841	' ', 20(I3,',')/ &
	1842	' ', 19(I3,','),I3,'.'/ &
[1]	1843	' height levels selected for standard plot:'/ &
[189]	1844	' k = ', 20(I3,',')/ &
	1845	' ', 20(I3,',')/ &
	1846	' ', 20(I3,',')/ &
	1847	' ', 20(I3,',')/ &
	1848	' ', 19(I3,','),I3,'.'/ &
[1]	1849	' Time averaged over ', F7.1, ' s,' / &
	1850	' Profiles for the time averaging are taken every ', &
	1851	F6.1,' s')
	1852	#endif
	1853	400 FORMAT (//' Physical quantities:'/ &
	1854	' -------------------'/)
	1855	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1856	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1857	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1858	' f* = ',F9.6,' 1/s')
	1859	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1860	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1861	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1862	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1863	' ------------------------'/)
[57]	1864	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1865	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1866	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1867	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1868	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1869	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1870	' Height: ',A,' m'/ &
	1871	' Temperature: ',A,' K'/ &
	1872	' Gradient: ',A,' K/100m'/ &
	1873	' Gridpoint: ',A)
	1874	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1875	' Height: ',A,' m'/ &
	1876	' Humidity: ',A,' kg/kg'/ &
	1877	' Gradient: ',A,' (kg/kg)/100m'/ &
	1878	' Gridpoint: ',A)
	1879	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1880	' Height: ',A,' m'/ &
	1881	' Scalar concentration: ',A,' kg/m**3'/ &
	1882	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1883	' Gridpoint: ',A)
	1884	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1885	' Height: ',A,' m'/ &
	1886	' ug: ',A,' m/s'/ &
	1887	' Gradient: ',A,' 1/100s'/ &
	1888	' Gridpoint: ',A)
	1889	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1890	' Height: ',A,' m'/ &
[97]	1891	' vg: ',A,' m/s'/ &
[1]	1892	' Gradient: ',A,' 1/100s'/ &
	1893	' Gridpoint: ',A)
[97]	1894	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1895	' Height: ',A,' m'/ &
	1896	' Salinity: ',A,' psu'/ &
	1897	' Gradient: ',A,' psu/100m'/ &
	1898	' Gridpoint: ',A)
[411]	1899	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1900	' Height: ',A,' m'/ &
	1901	' w_subs: ',A,' m/s'/ &
	1902	' Gradient: ',A,' (m/s)/100m'/ &
	1903	' Gridpoint: ',A)
[767]	1904	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1905	' profiles')
[824]	1906	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1907	' ----------------------------------'/)
	1908	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1909	'on)')
	1910	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1911	' total water content is used.'/ &
	1912	' Condensation is parameterized via 0% - or 100% scheme.')
	1913	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1914	'icle model')
	1915	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1916	' droplets < 1.0E-6 m')
[825]	1917	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1918	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1919	'are used'/ &
	1920	' number of radius classes: ',I3,' interval ', &
	1921	'[1.0E-6,2.0E-4] m'/ &
	1922	' number of dissipation classes: ',I2,' interval ', &
	1923	'[0,1000] cm2/s3')
	1924	437 FORMAT (' Droplet collision is switched off')
[1]	1925	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1926	' ---------------------------'/)
[824]	1927	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1928	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1929	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1930	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1931	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1932	470 FORMAT (//' Actions during the simulation:'/ &
	1933	' -----------------------------'/)
[94]	1934	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1935	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1936	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1937	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1938	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1939	' to i/j =',I4)
	1940	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1941	1X,F5.3, ' m2/s2')
	1942	474 FORMAT (' Random number generator used : ',A/)
	1943	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1944	'respectively, if'/ &
	1945	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1946	' 3D-simulation'/)
	1947	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1948	'respectively, if the'/ &
	1949	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1950	' the 3D-simulation'/)
	1951	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1952	'respectively, if the'/ &
	1953	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1954	' the 3D-simulation'/)
	1955	480 FORMAT (' Particles:'/ &
	1956	' ---------'// &
	1957	' Particle advection is active (switched on at t = ', F7.1, &
	1958	' s)'/ &
	1959	' Start of new particle generations every ',F6.1,' s'/ &
	1960	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1961	' bottom: ', A, ' top: ', A/&
	1962	' Maximum particle age: ',F9.1,' s'/ &
[117]	1963	' Advection stopped at t = ',F9.1,' s'/ &
	1964	' Particles are sorted every ',F9.1,' s'/)
[1]	1965	481 FORMAT (' Particles have random start positions'/)
[336]	1966	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1967	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1968	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1969	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1970	' Maximum age of the end of the tail: ',F8.2,' s')
	1971	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1972	486 FORMAT (' Particle statistics are written on file'/)
	1973	487 FORMAT (' Number of particle groups: ',I2/)
	1974	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1975	' minimum timestep for advection: ', F7.5/)
	1976	489 FORMAT (' Number of particles simultaneously released at each ', &
	1977	'point: ', I5/)
	1978	490 FORMAT (' Particle group ',I2,':'/ &
	1979	' Particle radius: ',E10.3, 'm')
	1980	491 FORMAT (' Particle inertia is activated'/ &
	1981	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1982	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1983	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1984	' y:',F8.1,' - ',F8.1,' m'/&
	1985	' z:',F8.1,' - ',F8.1,' m'/&
	1986	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1987	' m dz = ',F8.1,' m'/)
	1988	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1989	F8.2,' s'/)
	1990	495 FORMAT (' Number of particles in total domain: ',I10/)
	1991	500 FORMAT (//' 1D-Model parameters:'/ &
	1992	' -------------------'// &
	1993	' Simulation time: ',F8.1,' s'/ &
	1994	' Run-controll output every: ',F8.1,' s'/ &
	1995	' Vertical profile output every: ',F8.1,' s'/ &
	1996	' Mixing length calculation: ',A/ &
	1997	' Dissipation calculation: ',A/)
	1998	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1999	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2000	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2001
	2002
	2003	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |