Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1092

Last change on this file since 1092 was 1092, checked in by raasch, 11 years ago
unused variables remove from several routines
Property svn:keywords set to `Id`
File size: 76.4 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1092]	22	! unused variables removed
[941]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1092 2013-02-02 11:24:22Z raasch $
	27	!
[1037]	28	! 1036 2012-10-22 13:43:42Z raasch
	29	! code put under GPL (PALM 3.9)
	30	!
[1035]	31	! 1031 2012-10-19 14:35:30Z raasch
	32	! output of netCDF data format modified
	33	!
[1017]	34	! 1015 2012-09-27 09:23:24Z raasch
	35	! output of Aajustment of mixing length to the Prandtl mixing length at first
	36	! grid point above ground removed
	37	!
[1004]	38	! 1003 2012-09-14 14:35:53Z raasch
	39	! output of information about equal/unequal subdomain size removed
	40	!
[1002]	41	! 1001 2012-09-13 14:08:46Z raasch
	42	! all actions concerning leapfrog- and upstream-spline-scheme removed
	43	!
[979]	44	! 978 2012-08-09 08:28:32Z fricke
	45	! -km_damp_max, outflow_damping_width
	46	! +pt_damping_factor, pt_damping_width
	47	! +z0h
	48	!
[965]	49	! 964 2012-07-26 09:14:24Z raasch
	50	! output of profil-related quantities removed
	51	!
[941]	52	! 940 2012-07-09 14:31:00Z raasch
	53	! Output in case of simulations for pure neutral stratification (no pt-equation
	54	! solved)
	55	!
[928]	56	! 927 2012-06-06 19:15:04Z raasch
	57	! output of masking_method for mg-solver
	58	!
[869]	59	! 868 2012-03-28 12:21:07Z raasch
	60	! translation velocity in Galilean transformation changed to 0.6 * ug
	61	!
[834]	62	! 833 2012-02-22 08:55:55Z maronga
	63	! Adjusted format for leaf area density
	64	!
[829]	65	! 828 2012-02-21 12:00:36Z raasch
	66	! output of dissipation_classes + radius_classes
	67	!
[826]	68	! 825 2012-02-19 03:03:44Z raasch
	69	! Output of cloud physics parameters/quantities complemented and restructured
	70	!
[768]	71	! 767 2011-10-14 06:39:12Z raasch
	72	! Output of given initial u,v-profiles
	73	!
[760]	74	! 759 2011-09-15 13:58:31Z raasch
	75	! output of maximum number of parallel io streams
	76	!
[708]	77	! 707 2011-03-29 11:39:40Z raasch
	78	! bc_lr/ns replaced by bc_lr/ns_cyc
	79	!
[668]	80	! 667 2010-12-23 12:06:00Z suehring/gryschka
	81	! Output of advection scheme.
	82	! Modified output of Prandtl-layer height.
	83	!
[581]	84	! 580 2010-10-05 13:59:11Z heinze
	85	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	86	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	87	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	88	!
[494]	89	! 493 2010-03-01 08:30:24Z raasch
	90	! NetCDF data output format extendend for NetCDF4/HDF5
	91	!
[482]	92	! 449 2010-02-02 11:23:59Z raasch
	93	! +large scale vertical motion (subsidence/ascent)
	94	! Bugfix: index problem concerning gradient_level indices removed
	95	!
[449]	96	! 410 2009-12-04 17:05:40Z letzel
	97	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	98	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	99	!
[392]	100	! 346 2009-07-06 10:13:41Z raasch
[328]	101	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	102	! Coupling with independent precursor runs.
[254]	103	! Output of messages replaced by message handling routine.
[336]	104	! Output of several additional dvr parameters
[240]	105	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	106	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	107	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	108	! topography_grid_convention moved from user_header
[292]	109	! small bugfix concerning 3d 64bit netcdf output format
[1]	110	!
[226]	111	! 206 2008-10-13 14:59:11Z raasch
	112	! Bugfix: error in zu index in case of section_xy = -1
	113	!
[200]	114	! 198 2008-09-17 08:55:28Z raasch
	115	! Format adjustments allowing output of larger revision numbers
	116	!
[198]	117	! 197 2008-09-16 15:29:03Z raasch
	118	! allow 100 spectra levels instead of 10 for consistency with
	119	! define_netcdf_header,
	120	! bugfix in the output of the characteristic levels of potential temperature,
	121	! geostrophic wind, scalar concentration, humidity and leaf area density,
	122	! output of turbulence recycling informations
	123	!
[139]	124	! 138 2007-11-28 10:03:58Z letzel
	125	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	126	! Allow two instead of one digit to specify isosurface and slicer variables.
	127	! Output of sorting frequency of particles
	128	!
[110]	129	! 108 2007-08-24 15:10:38Z letzel
	130	! Output of informations for coupled model runs (boundary conditions etc.)
	131	! + output of momentumfluxes at the top boundary
	132	! Rayleigh damping for ocean, e_init
	133	!
[98]	134	! 97 2007-06-21 08:23:15Z raasch
	135	! Adjustments for the ocean version.
	136	! use_pt_reference renamed use_reference
	137	!
[90]	138	! 87 2007-05-22 15:46:47Z raasch
	139	! Bugfix: output of use_upstream_for_tke
	140	!
[83]	141	! 82 2007-04-16 15:40:52Z raasch
	142	! Preprocessor strings for different linux clusters changed to "lc",
	143	! routine local_flush is used for buffer flushing
	144	!
[77]	145	! 76 2007-03-29 00:58:32Z raasch
	146	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	147	! output of the loop optimization method, moisture renamed humidity,
	148	! output of subversion revision number
	149	!
[39]	150	! 19 2007-02-23 04:53:48Z raasch
	151	! Output of scalar flux applied at top boundary
	152	!
[3]	153	! RCS Log replace by Id keyword, revision history cleaned up
	154	!
[1]	155	! Revision 1.63 2006/08/22 13:53:13 raasch
	156	! Output of dz_max
	157	!
	158	! Revision 1.1 1997/08/11 06:17:20 raasch
	159	! Initial revision
	160	!
	161	!
	162	! Description:
	163	! ------------
	164	! Writing a header with all important informations about the actual run.
	165	! This subroutine is called three times, two times at the beginning
	166	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	167	! end of the run, then writing additional information about CPU-usage on file
	168	! header.
[411]	169	!-----------------------------------------------------------------------------!
[1]	170
	171	USE arrays_3d
	172	USE control_parameters
	173	USE cloud_parameters
	174	USE cpulog
	175	USE dvrp_variables
	176	USE grid_variables
	177	USE indices
	178	USE model_1d
	179	USE particle_attributes
	180	USE pegrid
[411]	181	USE subsidence_mod
[1]	182	USE spectrum
	183
	184	IMPLICIT NONE
	185
	186	CHARACTER (LEN=1) :: prec
	187	CHARACTER (LEN=2) :: do2d_mode
	188	CHARACTER (LEN=5) :: section_chr
	189	CHARACTER (LEN=10) :: coor_chr, host_chr
	190	CHARACTER (LEN=16) :: begin_chr
[200]	191	CHARACTER (LEN=23) :: ver_rev
[1]	192	CHARACTER (LEN=40) :: output_format
[167]	193	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	194	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	195	domask_chr, run_classification
[167]	196	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	197	temperatures, ugcomponent, vgcomponent
[1]	198	CHARACTER (LEN=85) :: roben, runten
	199
[410]	200	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	201
	202	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
[1092]	203	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
[1]	204	REAL :: cpuseconds_per_simulated_second
	205
	206	!
	207	!-- Open the output file. At the end of the simulation, output is directed
	208	!-- to unit 19.
	209	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	210	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	211	io = 15 ! header output on file RUN_CONTROL
	212	ELSE
	213	io = 19 ! header output on file HEADER
	214	ENDIF
	215	CALL check_open( io )
	216
	217	!
	218	!-- At the end of the run, output file (HEADER) will be rewritten with
	219	!-- new informations
	220	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	221
	222	!
	223	!-- Determine kind of model run
	224	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	225	run_classification = '3D - restart run'
[328]	226	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	227	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	228	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	229	run_classification = '3D - run without 1D - prerun'
[197]	230	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	231	run_classification = '3D - run with 1D - prerun'
[197]	232	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	233	run_classification = '3D - run initialized by user'
[1]	234	ELSE
[254]	235	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	236	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	237	ENDIF
[97]	238	IF ( ocean ) THEN
	239	run_classification = 'ocean - ' // run_classification
	240	ELSE
	241	run_classification = 'atmosphere - ' // run_classification
	242	ENDIF
[1]	243
	244	!
	245	!-- Run-identification, date, time, host
	246	host_chr = host(1:10)
[75]	247	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	248	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	249	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	250	#if defined( __mpi2 )
	251	mpi_type = 2
	252	#else
	253	mpi_type = 1
	254	#endif
	255	WRITE ( io, 101 ) mpi_type, coupling_mode
	256	ENDIF
[102]	257	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	258	ADJUSTR( host_chr )
[1]	259	#if defined( __parallel )
	260	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	261	char1 = 'calculated'
	262	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	263	host(1:2) == 'lc' ) .AND. &
	264	npex == -1 .AND. pdims(2) == 1 ) THEN
	265	char1 = 'forced'
	266	ELSE
	267	char1 = 'predefined'
	268	ENDIF
	269	IF ( threads_per_task == 1 ) THEN
[102]	270	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	271	ELSE
[102]	272	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	273	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	274	ENDIF
	275	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	276	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	277	npex == -1 .AND. pdims(2) == 1 ) &
	278	THEN
[102]	279	WRITE ( io, 106 )
[1]	280	ELSEIF ( pdims(2) == 1 ) THEN
[102]	281	WRITE ( io, 107 ) 'x'
[1]	282	ELSEIF ( pdims(1) == 1 ) THEN
[102]	283	WRITE ( io, 107 ) 'y'
[1]	284	ENDIF
[102]	285	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	286	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	287	WRITE ( io, 108 ) maximum_parallel_io_streams
	288	ENDIF
[1]	289	#endif
	290	WRITE ( io, 99 )
	291
	292	!
	293	!-- Numerical schemes
	294	WRITE ( io, 110 )
	295	IF ( psolver(1:7) == 'poisfft' ) THEN
	296	WRITE ( io, 111 ) TRIM( fft_method )
	297	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	298	ELSEIF ( psolver == 'sor' ) THEN
	299	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	300	ELSEIF ( psolver == 'multigrid' ) THEN
	301	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	302	IF ( mg_cycles == -1 ) THEN
	303	WRITE ( io, 140 ) residual_limit
	304	ELSE
	305	WRITE ( io, 141 ) mg_cycles
	306	ENDIF
	307	IF ( mg_switch_to_pe0_level == 0 ) THEN
	308	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	309	nzt_mg(1)
[197]	310	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	311	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	312	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	313	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	314	nzt_mg(mg_switch_to_pe0_level), &
	315	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	316	nzt_mg(1)
	317	ENDIF
[927]	318	IF ( masking_method ) WRITE ( io, 144 )
[1]	319	ENDIF
	320	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	321	THEN
	322	WRITE ( io, 142 )
	323	ENDIF
	324
	325	IF ( momentum_advec == 'pw-scheme' ) THEN
	326	WRITE ( io, 113 )
[667]	327	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	328	WRITE ( io, 503 )
[1]	329	ENDIF
	330	IF ( scalar_advec == 'pw-scheme' ) THEN
	331	WRITE ( io, 116 )
[667]	332	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	333	WRITE ( io, 504 )
[1]	334	ELSE
	335	WRITE ( io, 118 )
	336	ENDIF
[63]	337
	338	WRITE ( io, 139 ) TRIM( loop_optimization )
	339
[1]	340	IF ( galilei_transformation ) THEN
	341	IF ( use_ug_for_galilei_tr ) THEN
[868]	342	char1 = '0.6 * geostrophic wind'
[1]	343	ELSE
	344	char1 = 'mean wind in model domain'
	345	ENDIF
	346	IF ( simulated_time_at_begin == simulated_time ) THEN
	347	char2 = 'at the start of the run'
	348	ELSE
	349	char2 = 'at the end of the run'
	350	ENDIF
	351	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	352	advected_distance_x/1000.0, advected_distance_y/1000.0
	353	ENDIF
[1001]	354	WRITE ( io, 122 ) timestep_scheme
[87]	355	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	356	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	357	IF ( .NOT. ocean ) THEN
	358	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	359	rayleigh_damping_factor
	360	ELSE
	361	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	362	rayleigh_damping_factor
	363	ENDIF
[1]	364	ENDIF
[940]	365	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	366	IF ( humidity ) THEN
[1]	367	IF ( .NOT. cloud_physics ) THEN
	368	WRITE ( io, 129 )
	369	ELSE
	370	WRITE ( io, 130 )
	371	ENDIF
	372	ENDIF
	373	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	374	IF ( conserve_volume_flow ) THEN
[241]	375	WRITE ( io, 150 ) conserve_volume_flow_mode
	376	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	377	WRITE ( io, 151 ) u_bulk, v_bulk
	378	ENDIF
[240]	379	ELSEIF ( dp_external ) THEN
	380	IF ( dp_smooth ) THEN
[241]	381	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	382	ELSE
[241]	383	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	384	ENDIF
	385	ENDIF
[411]	386	IF ( large_scale_subsidence ) THEN
	387	WRITE ( io, 153 )
	388	WRITE ( io, 154 )
	389	ENDIF
[1]	390	WRITE ( io, 99 )
	391
	392	!
	393	!-- Runtime and timestep informations
	394	WRITE ( io, 200 )
	395	IF ( .NOT. dt_fixed ) THEN
	396	WRITE ( io, 201 ) dt_max, cfl_factor
	397	ELSE
	398	WRITE ( io, 202 ) dt
	399	ENDIF
	400	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	401
	402	IF ( time_restart /= 9999999.9 .AND. &
	403	simulated_time_at_begin == simulated_time ) THEN
	404	IF ( dt_restart == 9999999.9 ) THEN
	405	WRITE ( io, 204 ) ' Restart at: ',time_restart
	406	ELSE
	407	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	408	ENDIF
	409	ENDIF
	410
	411	IF ( simulated_time_at_begin /= simulated_time ) THEN
	412	i = MAX ( log_point_s(10)%counts, 1 )
	413	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	414	cpuseconds_per_simulated_second = 0.0
	415	ELSE
	416	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	417	( simulated_time - &
	418	simulated_time_at_begin )
	419	ENDIF
	420	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	421	log_point_s(10)%sum / REAL( i ), &
	422	cpuseconds_per_simulated_second
	423	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	424	IF ( dt_restart == 9999999.9 ) THEN
	425	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	426	ELSE
	427	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	428	ENDIF
	429	ENDIF
	430	ENDIF
	431
	432	!
[291]	433	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	434	!-- and ocean are used. In this case, coupling_start_time defines the time
	435	!-- when the coupling is switched on.
	436	IF ( coupling_start_time /= 0.0 ) THEN
	437	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	438	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	439	ELSE
	440	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	441	'precursor runs'
	442	ENDIF
	443	WRITE ( io, 207 ) char1, coupling_start_time
	444	ENDIF
	445
	446	!
[1]	447	!-- Computational grid
[94]	448	IF ( .NOT. ocean ) THEN
	449	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	450	IF ( dz_stretch_level_index < nzt+1 ) THEN
	451	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	452	dz_stretch_factor, dz_max
	453	ENDIF
	454	ELSE
	455	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	456	IF ( dz_stretch_level_index > 0 ) THEN
	457	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	458	dz_stretch_factor, dz_max
	459	ENDIF
[1]	460	ENDIF
	461	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	462	MIN( nnz+2, nzt+2 )
	463	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	464
	465	!
	466	!-- Topography
	467	WRITE ( io, 270 ) topography
	468	SELECT CASE ( TRIM( topography ) )
	469
	470	CASE ( 'flat' )
	471	! no actions necessary
	472
	473	CASE ( 'single_building' )
	474	blx = INT( building_length_x / dx )
	475	bly = INT( building_length_y / dy )
	476	bh = INT( building_height / dz )
	477
	478	IF ( building_wall_left == 9999999.9 ) THEN
	479	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	480	ENDIF
	481	bxl = INT ( building_wall_left / dx + 0.5 )
	482	bxr = bxl + blx
	483
	484	IF ( building_wall_south == 9999999.9 ) THEN
	485	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	486	ENDIF
	487	bys = INT ( building_wall_south / dy + 0.5 )
	488	byn = bys + bly
	489
	490	WRITE ( io, 271 ) building_length_x, building_length_y, &
	491	building_height, bxl, bxr, bys, byn
	492
[240]	493	CASE ( 'single_street_canyon' )
	494	ch = NINT( canyon_height / dz )
	495	IF ( canyon_width_x /= 9999999.9 ) THEN
	496	!
	497	!-- Street canyon in y direction
	498	cwx = NINT( canyon_width_x / dx )
	499	IF ( canyon_wall_left == 9999999.9 ) THEN
	500	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	501	ENDIF
	502	cxl = NINT( canyon_wall_left / dx )
	503	cxr = cxl + cwx
	504	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	505
	506	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	507	!
	508	!-- Street canyon in x direction
	509	cwy = NINT( canyon_width_y / dy )
	510	IF ( canyon_wall_south == 9999999.9 ) THEN
	511	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	512	ENDIF
	513	cys = NINT( canyon_wall_south / dy )
	514	cyn = cys + cwy
	515	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	516	ENDIF
	517
[1]	518	END SELECT
	519
[256]	520	IF ( TRIM( topography ) /= 'flat' ) THEN
	521	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	522	IF ( TRIM( topography ) == 'single_building' .OR. &
	523	TRIM( topography ) == 'single_street_canyon' ) THEN
	524	WRITE ( io, 278 )
	525	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	526	WRITE ( io, 279 )
	527	ENDIF
	528	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	529	WRITE ( io, 278 )
	530	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	531	WRITE ( io, 279 )
	532	ENDIF
	533	ENDIF
	534
[138]	535	IF ( plant_canopy ) THEN
	536
	537	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	538	IF ( passive_scalar ) THEN
	539	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	540	leaf_surface_concentration
	541	ENDIF
[138]	542
[1]	543	!
[153]	544	!-- Heat flux at the top of vegetation
	545	WRITE ( io, 282 ) cthf
	546
	547	!
[138]	548	!-- Leaf area density profile
	549	!-- Building output strings, starting with surface value
[833]	550	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	551	gradients = '------'
	552	slices = ' 0'
	553	coordinates = ' 0.0'
	554	i = 1
	555	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	556
	557	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	558	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	559
	560	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	561	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	562
	563	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	564	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	565
	566	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	567	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	568
	569	i = i + 1
	570	ENDDO
	571
[153]	572	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	573	TRIM( gradients ), TRIM( slices )
	574
	575	ENDIF
	576
	577	!
[1]	578	!-- Boundary conditions
	579	IF ( ibc_p_b == 0 ) THEN
	580	runten = 'p(0) = 0 \|'
	581	ELSEIF ( ibc_p_b == 1 ) THEN
	582	runten = 'p(0) = p(1) \|'
	583	ELSE
	584	runten = 'p(0) = p(1) +R\|'
	585	ENDIF
	586	IF ( ibc_p_t == 0 ) THEN
	587	roben = 'p(nzt+1) = 0 \|'
	588	ELSE
	589	roben = 'p(nzt+1) = p(nzt) \|'
	590	ENDIF
	591
	592	IF ( ibc_uv_b == 0 ) THEN
	593	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	594	ELSE
	595	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	596	ENDIF
[132]	597	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	598	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	599	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	600	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	601	ELSE
	602	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	603	ENDIF
	604
	605	IF ( ibc_pt_b == 0 ) THEN
	606	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	607	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	608	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	609	ELSEIF ( ibc_pt_b == 2 ) THEN
	610	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	611	ENDIF
	612	IF ( ibc_pt_t == 0 ) THEN
[19]	613	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	614	ELSEIF( ibc_pt_t == 1 ) THEN
	615	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	616	ELSEIF( ibc_pt_t == 2 ) THEN
	617	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	618
[1]	619	ENDIF
	620
	621	WRITE ( io, 300 ) runten, roben
	622
	623	IF ( .NOT. constant_diffusion ) THEN
	624	IF ( ibc_e_b == 1 ) THEN
	625	runten = 'e(0) = e(1)'
	626	ELSE
	627	runten = 'e(0) = e(1) = (u/0.1)*2'
	628	ENDIF
	629	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	630
[97]	631	WRITE ( io, 301 ) 'e', runten, roben
[1]	632
	633	ENDIF
	634
[97]	635	IF ( ocean ) THEN
	636	runten = 'sa(0) = sa(1)'
	637	IF ( ibc_sa_t == 0 ) THEN
	638	roben = 'sa(nzt+1) = sa_surface'
[1]	639	ELSE
[97]	640	roben = 'sa(nzt+1) = sa(nzt)'
[1]	641	ENDIF
[97]	642	WRITE ( io, 301 ) 'sa', runten, roben
	643	ENDIF
[1]	644
[97]	645	IF ( humidity ) THEN
	646	IF ( ibc_q_b == 0 ) THEN
	647	runten = 'q(0) = q_surface'
	648	ELSE
	649	runten = 'q(0) = q(1)'
	650	ENDIF
	651	IF ( ibc_q_t == 0 ) THEN
	652	roben = 'q(nzt) = q_top'
	653	ELSE
	654	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	655	ENDIF
	656	WRITE ( io, 301 ) 'q', runten, roben
	657	ENDIF
[1]	658
[97]	659	IF ( passive_scalar ) THEN
	660	IF ( ibc_q_b == 0 ) THEN
	661	runten = 's(0) = s_surface'
	662	ELSE
	663	runten = 's(0) = s(1)'
	664	ENDIF
	665	IF ( ibc_q_t == 0 ) THEN
	666	roben = 's(nzt) = s_top'
	667	ELSE
	668	roben = 's(nzt) = s(nzt-1) + ds/dz'
	669	ENDIF
	670	WRITE ( io, 301 ) 's', runten, roben
[1]	671	ENDIF
	672
	673	IF ( use_surface_fluxes ) THEN
	674	WRITE ( io, 303 )
	675	IF ( constant_heatflux ) THEN
	676	WRITE ( io, 306 ) surface_heatflux
	677	IF ( random_heatflux ) WRITE ( io, 307 )
	678	ENDIF
[75]	679	IF ( humidity .AND. constant_waterflux ) THEN
[1]	680	WRITE ( io, 311 ) surface_waterflux
	681	ENDIF
	682	IF ( passive_scalar .AND. constant_waterflux ) THEN
	683	WRITE ( io, 313 ) surface_waterflux
	684	ENDIF
	685	ENDIF
	686
[19]	687	IF ( use_top_fluxes ) THEN
	688	WRITE ( io, 304 )
[102]	689	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	690	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	691	IF ( constant_top_heatflux ) THEN
	692	WRITE ( io, 306 ) top_heatflux
	693	ENDIF
	694	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	695	WRITE ( io, 316 )
[19]	696	ENDIF
[97]	697	IF ( ocean .AND. constant_top_salinityflux ) THEN
	698	WRITE ( io, 309 ) top_salinityflux
	699	ENDIF
[75]	700	IF ( humidity .OR. passive_scalar ) THEN
[19]	701	WRITE ( io, 315 )
	702	ENDIF
	703	ENDIF
	704
[1]	705	IF ( prandtl_layer ) THEN
[978]	706	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	707	z0h_factor*roughness_length, kappa, &
[94]	708	rif_min, rif_max
[1]	709	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	710	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	711	WRITE ( io, 312 )
	712	ENDIF
	713	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	714	WRITE ( io, 314 )
	715	ENDIF
	716	ELSE
	717	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	718	WRITE ( io, 310 ) rif_min, rif_max
	719	ENDIF
	720	ENDIF
	721
	722	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	723	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	724	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	725	IF ( turbulent_inflow ) THEN
	726	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	727	inflow_damping_height, inflow_damping_width
	728	ENDIF
[1]	729	ENDIF
	730
	731	!
	732	!-- Listing of 1D-profiles
[151]	733	WRITE ( io, 325 ) dt_dopr_listing
[1]	734	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	735	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	736	ENDIF
	737
	738	!
	739	!-- DATA output
	740	WRITE ( io, 330 )
	741	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	742	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	743	ENDIF
	744
	745	!
	746	!-- 1D-profiles
[346]	747	dopr_chr = 'Profile:'
[1]	748	IF ( dopr_n /= 0 ) THEN
	749	WRITE ( io, 331 )
	750
	751	output_format = ''
	752	IF ( netcdf_output ) THEN
[1031]	753	output_format = output_format_netcdf
[1]	754	ENDIF
[292]	755	WRITE ( io, 344 ) output_format
[1]	756
	757	DO i = 1, dopr_n
	758	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	759	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	760	WRITE ( io, 332 ) dopr_chr
	761	dopr_chr = ' :'
	762	ENDIF
	763	ENDDO
	764
	765	IF ( dopr_chr /= '' ) THEN
	766	WRITE ( io, 332 ) dopr_chr
	767	ENDIF
	768	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	769	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	770	ENDIF
	771
	772	!
	773	!-- 2D-arrays
	774	DO av = 0, 1
	775
	776	i = 1
	777	do2d_xy = ''
	778	do2d_xz = ''
	779	do2d_yz = ''
	780	DO WHILE ( do2d(av,i) /= ' ' )
	781
	782	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	783	do2d_mode = do2d(av,i)(l-1:l)
	784
	785	SELECT CASE ( do2d_mode )
	786	CASE ( 'xy' )
	787	ll = LEN_TRIM( do2d_xy )
	788	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	789	CASE ( 'xz' )
	790	ll = LEN_TRIM( do2d_xz )
	791	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	792	CASE ( 'yz' )
	793	ll = LEN_TRIM( do2d_yz )
	794	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	795	END SELECT
	796
	797	i = i + 1
	798
	799	ENDDO
	800
	801	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	802	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	803	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	804	( netcdf_output .OR. iso2d_output ) ) THEN
	805
	806	IF ( av == 0 ) THEN
	807	WRITE ( io, 334 ) ''
	808	ELSE
	809	WRITE ( io, 334 ) '(time-averaged)'
	810	ENDIF
	811
	812	IF ( do2d_at_begin ) THEN
	813	begin_chr = 'and at the start'
	814	ELSE
	815	begin_chr = ''
	816	ENDIF
	817
	818	output_format = ''
	819	IF ( netcdf_output ) THEN
[1031]	820	output_format = output_format_netcdf
[1]	821	ENDIF
	822	IF ( iso2d_output ) THEN
	823	IF ( netcdf_output ) THEN
[1031]	824	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	825	ELSE
	826	output_format = 'iso2d'
	827	ENDIF
	828	ENDIF
[292]	829	WRITE ( io, 344 ) output_format
[1]	830
	831	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	832	i = 1
	833	slices = '/'
	834	coordinates = '/'
	835	!
	836	!-- Building strings with index and coordinate informations of the
	837	!-- slices
	838	DO WHILE ( section(i,1) /= -9999 )
	839
	840	WRITE (section_chr,'(I5)') section(i,1)
	841	section_chr = ADJUSTL( section_chr )
	842	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	843
[206]	844	IF ( section(i,1) == -1 ) THEN
	845	WRITE (coor_chr,'(F10.1)') -1.0
	846	ELSE
	847	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	848	ENDIF
[1]	849	coor_chr = ADJUSTL( coor_chr )
	850	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	851
	852	i = i + 1
	853	ENDDO
	854	IF ( av == 0 ) THEN
	855	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	856	TRIM( begin_chr ), 'k', TRIM( slices ), &
	857	TRIM( coordinates )
	858	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	859	WRITE ( io, 339 ) skip_time_do2d_xy
	860	ENDIF
	861	ELSE
	862	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	863	TRIM( begin_chr ), averaging_interval, &
	864	dt_averaging_input, 'k', TRIM( slices ), &
	865	TRIM( coordinates )
	866	IF ( skip_time_data_output_av /= 0.0 ) THEN
	867	WRITE ( io, 339 ) skip_time_data_output_av
	868	ENDIF
	869	ENDIF
	870
	871	ENDIF
	872
	873	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	874	i = 1
	875	slices = '/'
	876	coordinates = '/'
	877	!
	878	!-- Building strings with index and coordinate informations of the
	879	!-- slices
	880	DO WHILE ( section(i,2) /= -9999 )
	881
	882	WRITE (section_chr,'(I5)') section(i,2)
	883	section_chr = ADJUSTL( section_chr )
	884	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	885
	886	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	887	coor_chr = ADJUSTL( coor_chr )
	888	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	889
	890	i = i + 1
	891	ENDDO
	892	IF ( av == 0 ) THEN
	893	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	894	TRIM( begin_chr ), 'j', TRIM( slices ), &
	895	TRIM( coordinates )
	896	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	897	WRITE ( io, 339 ) skip_time_do2d_xz
	898	ENDIF
	899	ELSE
	900	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	901	TRIM( begin_chr ), averaging_interval, &
	902	dt_averaging_input, 'j', TRIM( slices ), &
	903	TRIM( coordinates )
	904	IF ( skip_time_data_output_av /= 0.0 ) THEN
	905	WRITE ( io, 339 ) skip_time_data_output_av
	906	ENDIF
	907	ENDIF
	908	ENDIF
	909
	910	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	911	i = 1
	912	slices = '/'
	913	coordinates = '/'
	914	!
	915	!-- Building strings with index and coordinate informations of the
	916	!-- slices
	917	DO WHILE ( section(i,3) /= -9999 )
	918
	919	WRITE (section_chr,'(I5)') section(i,3)
	920	section_chr = ADJUSTL( section_chr )
	921	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	922
	923	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	924	coor_chr = ADJUSTL( coor_chr )
	925	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	926
	927	i = i + 1
	928	ENDDO
	929	IF ( av == 0 ) THEN
	930	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	931	TRIM( begin_chr ), 'i', TRIM( slices ), &
	932	TRIM( coordinates )
	933	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	934	WRITE ( io, 339 ) skip_time_do2d_yz
	935	ENDIF
	936	ELSE
	937	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	938	TRIM( begin_chr ), averaging_interval, &
	939	dt_averaging_input, 'i', TRIM( slices ), &
	940	TRIM( coordinates )
	941	IF ( skip_time_data_output_av /= 0.0 ) THEN
	942	WRITE ( io, 339 ) skip_time_data_output_av
	943	ENDIF
	944	ENDIF
	945	ENDIF
	946
	947	ENDIF
	948
	949	ENDDO
	950
	951	!
	952	!-- 3d-arrays
	953	DO av = 0, 1
	954
	955	i = 1
	956	do3d_chr = ''
	957	DO WHILE ( do3d(av,i) /= ' ' )
	958
	959	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	960	i = i + 1
	961
	962	ENDDO
	963
	964	IF ( do3d_chr /= '' ) THEN
	965	IF ( av == 0 ) THEN
	966	WRITE ( io, 336 ) ''
	967	ELSE
	968	WRITE ( io, 336 ) '(time-averaged)'
	969	ENDIF
	970
	971	output_format = ''
	972	IF ( netcdf_output ) THEN
[1031]	973	output_format = output_format_netcdf
[1]	974	ENDIF
	975	IF ( avs_output ) THEN
	976	IF ( netcdf_output ) THEN
[1031]	977	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	978	ELSE
	979	output_format = 'avs'
	980	ENDIF
	981	ENDIF
[292]	982	WRITE ( io, 344 ) output_format
[1]	983
	984	IF ( do3d_at_begin ) THEN
	985	begin_chr = 'and at the start'
	986	ELSE
	987	begin_chr = ''
	988	ENDIF
	989	IF ( av == 0 ) THEN
	990	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	991	zu(nz_do3d), nz_do3d
	992	ELSE
	993	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	994	TRIM( begin_chr ), averaging_interval, &
	995	dt_averaging_input, zu(nz_do3d), nz_do3d
	996	ENDIF
	997
	998	IF ( do3d_compress ) THEN
	999	do3d_chr = ''
	1000	i = 1
	1001	DO WHILE ( do3d(av,i) /= ' ' )
	1002
	1003	SELECT CASE ( do3d(av,i) )
	1004	CASE ( 'u' )
	1005	j = 1
	1006	CASE ( 'v' )
	1007	j = 2
	1008	CASE ( 'w' )
	1009	j = 3
	1010	CASE ( 'p' )
	1011	j = 4
	1012	CASE ( 'pt' )
	1013	j = 5
	1014	END SELECT
	1015	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1016	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1017	':' // prec // ','
	1018	i = i + 1
	1019
	1020	ENDDO
	1021	WRITE ( io, 338 ) do3d_chr
	1022
	1023	ENDIF
	1024
	1025	IF ( av == 0 ) THEN
	1026	IF ( skip_time_do3d /= 0.0 ) THEN
	1027	WRITE ( io, 339 ) skip_time_do3d
	1028	ENDIF
	1029	ELSE
	1030	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1031	WRITE ( io, 339 ) skip_time_data_output_av
	1032	ENDIF
	1033	ENDIF
	1034
	1035	ENDIF
	1036
	1037	ENDDO
	1038
	1039	!
[410]	1040	!-- masked arrays
	1041	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1042	mask_scale_x, mask_scale_y, mask_scale_z
	1043	DO mid = 1, masks
	1044	DO av = 0, 1
	1045
	1046	i = 1
	1047	domask_chr = ''
	1048	DO WHILE ( domask(mid,av,i) /= ' ' )
	1049	domask_chr = TRIM( domask_chr ) // ' ' // &
	1050	TRIM( domask(mid,av,i) ) // ','
	1051	i = i + 1
	1052	ENDDO
	1053
	1054	IF ( domask_chr /= '' ) THEN
	1055	IF ( av == 0 ) THEN
	1056	WRITE ( io, 346 ) '', mid
	1057	ELSE
	1058	WRITE ( io, 346 ) ' (time-averaged)', mid
	1059	ENDIF
	1060
[1031]	1061	output_format = ' '
[410]	1062	IF ( netcdf_output ) THEN
[1031]	1063	output_format = output_format_netcdf
[410]	1064	ENDIF
	1065	WRITE ( io, 344 ) output_format
	1066
	1067	IF ( av == 0 ) THEN
	1068	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1069	ELSE
	1070	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1071	averaging_interval, dt_averaging_input
	1072	ENDIF
	1073
	1074	IF ( av == 0 ) THEN
	1075	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1076	WRITE ( io, 339 ) skip_time_domask(mid)
	1077	ENDIF
	1078	ELSE
	1079	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1080	WRITE ( io, 339 ) skip_time_data_output_av
	1081	ENDIF
	1082	ENDIF
	1083	!
	1084	!-- output locations
	1085	DO dim = 1, 3
	1086	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1087	count = 0
	1088	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1089	count = count + 1
	1090	ENDDO
	1091	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1092	mask(mid,dim,:count)
	1093	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1094	mask_loop(mid,dim,2) < 0.0 .AND. &
	1095	mask_loop(mid,dim,3) == 0.0 ) THEN
	1096	WRITE ( io, 350 ) dir(dim), dir(dim)
	1097	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1098	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1099	mask_loop(mid,dim,1:2)
	1100	ELSE
	1101	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1102	mask_loop(mid,dim,1:3)
	1103	ENDIF
	1104	ENDDO
	1105	ENDIF
	1106
	1107	ENDDO
	1108	ENDDO
	1109
	1110	!
[1]	1111	!-- Timeseries
	1112	IF ( dt_dots /= 9999999.9 ) THEN
	1113	WRITE ( io, 340 )
	1114
	1115	output_format = ''
	1116	IF ( netcdf_output ) THEN
[1031]	1117	output_format = output_format_netcdf
[1]	1118	ENDIF
[292]	1119	WRITE ( io, 344 ) output_format
[1]	1120	WRITE ( io, 341 ) dt_dots
	1121	ENDIF
	1122
	1123	#if defined( __dvrp_graphics )
	1124	!
	1125	!-- Dvrp-output
	1126	IF ( dt_dvrp /= 9999999.9 ) THEN
	1127	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1128	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1129	i = 1
	1130	l = 0
[336]	1131	m = 0
[1]	1132	DO WHILE ( mode_dvrp(i) /= ' ' )
	1133	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1134	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1135	l = l + 1
	1136	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1137	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1138	isosurface_color(:,l)
[1]	1139	ENDIF
	1140	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1141	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1142	m = m + 1
	1143	IF ( do2d(0,j) /= ' ' ) THEN
	1144	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1145	slicer_range_limits_dvrp(:,m)
	1146	ENDIF
[1]	1147	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1148	WRITE ( io, 363 ) dvrp_psize
	1149	IF ( particle_dvrpsize /= 'none' ) THEN
	1150	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1151	dvrpsize_interval
	1152	ENDIF
	1153	IF ( particle_color /= 'none' ) THEN
	1154	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1155	color_interval
	1156	ENDIF
[1]	1157	ENDIF
	1158	i = i + 1
	1159	ENDDO
[237]	1160
[336]	1161	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1162	superelevation_y, superelevation, clip_dvrp_l, &
	1163	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1164
	1165	IF ( TRIM( topography ) /= 'flat' ) THEN
	1166	WRITE ( io, 366 ) topography_color
	1167	IF ( cluster_size > 1 ) THEN
	1168	WRITE ( io, 367 ) cluster_size
	1169	ENDIF
[237]	1170	ENDIF
	1171
[1]	1172	ENDIF
	1173	#endif
	1174
	1175	#if defined( __spectra )
	1176	!
	1177	!-- Spectra output
	1178	IF ( dt_dosp /= 9999999.9 ) THEN
	1179	WRITE ( io, 370 )
	1180
[1031]	1181	output_format = ' '
[1]	1182	IF ( netcdf_output ) THEN
[1031]	1183	output_format = output_format_netcdf
[1]	1184	ENDIF
[292]	1185	WRITE ( io, 344 ) output_format
[1]	1186	WRITE ( io, 371 ) dt_dosp
	1187	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1188	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1189	( spectra_direction(i), i = 1,10 ), &
[189]	1190	( comp_spectra_level(i), i = 1,100 ), &
	1191	( plot_spectra_level(i), i = 1,100 ), &
[1]	1192	averaging_interval_sp, dt_averaging_input_pr
	1193	ENDIF
	1194	#endif
	1195
	1196	WRITE ( io, 99 )
	1197
	1198	!
	1199	!-- Physical quantities
	1200	WRITE ( io, 400 )
	1201
	1202	!
	1203	!-- Geostrophic parameters
	1204	WRITE ( io, 410 ) omega, phi, f, fs
	1205
	1206	!
	1207	!-- Other quantities
	1208	WRITE ( io, 411 ) g
[97]	1209	IF ( use_reference ) THEN
	1210	IF ( ocean ) THEN
	1211	WRITE ( io, 412 ) prho_reference
	1212	ELSE
	1213	WRITE ( io, 413 ) pt_reference
	1214	ENDIF
	1215	ENDIF
[1]	1216
	1217	!
	1218	!-- Cloud physics parameters
	1219	IF ( cloud_physics ) THEN
[57]	1220	WRITE ( io, 415 )
	1221	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1222	ENDIF
	1223
	1224	!-- Profile of the geostrophic wind (component ug)
	1225	!-- Building output strings
	1226	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1227	gradients = '------'
	1228	slices = ' 0'
	1229	coordinates = ' 0.0'
	1230	i = 1
	1231	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1232
[167]	1233	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1234	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1235
[167]	1236	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1237	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1238
[167]	1239	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1240	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1241
[167]	1242	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1243	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1244
[430]	1245	IF ( i == 10 ) THEN
	1246	EXIT
	1247	ELSE
	1248	i = i + 1
	1249	ENDIF
	1250
[1]	1251	ENDDO
	1252
	1253	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1254	TRIM( gradients ), TRIM( slices )
	1255
	1256	!-- Profile of the geostrophic wind (component vg)
	1257	!-- Building output strings
	1258	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1259	gradients = '------'
	1260	slices = ' 0'
	1261	coordinates = ' 0.0'
	1262	i = 1
	1263	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1264
[167]	1265	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1266	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1267
[167]	1268	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1269	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1272	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1273
[167]	1274	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1275	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1276
[430]	1277	IF ( i == 10 ) THEN
	1278	EXIT
	1279	ELSE
	1280	i = i + 1
	1281	ENDIF
	1282
[1]	1283	ENDDO
	1284
	1285	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1286	TRIM( gradients ), TRIM( slices )
	1287
	1288	!
[767]	1289	!-- Initial wind profiles
	1290	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1291
	1292	!
[1]	1293	!-- Initial temperature profile
	1294	!-- Building output strings, starting with surface temperature
	1295	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1296	gradients = '------'
	1297	slices = ' 0'
	1298	coordinates = ' 0.0'
	1299	i = 1
	1300	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1301
[94]	1302	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1303	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1304
[94]	1305	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1306	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1307
[94]	1308	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1309	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1310
[94]	1311	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1312	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1313
[430]	1314	IF ( i == 10 ) THEN
	1315	EXIT
	1316	ELSE
	1317	i = i + 1
	1318	ENDIF
	1319
[1]	1320	ENDDO
	1321
	1322	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1323	TRIM( gradients ), TRIM( slices )
	1324
	1325	!
	1326	!-- Initial humidity profile
	1327	!-- Building output strings, starting with surface humidity
[75]	1328	IF ( humidity .OR. passive_scalar ) THEN
[1]	1329	WRITE ( temperatures, '(E8.1)' ) q_surface
	1330	gradients = '--------'
	1331	slices = ' 0'
	1332	coordinates = ' 0.0'
	1333	i = 1
	1334	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1335
	1336	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1337	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1338
	1339	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1340	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1341
	1342	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1343	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1344
	1345	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1346	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1347
[430]	1348	IF ( i == 10 ) THEN
	1349	EXIT
	1350	ELSE
	1351	i = i + 1
	1352	ENDIF
	1353
[1]	1354	ENDDO
	1355
[75]	1356	IF ( humidity ) THEN
[1]	1357	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1358	TRIM( gradients ), TRIM( slices )
	1359	ELSE
	1360	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1361	TRIM( gradients ), TRIM( slices )
	1362	ENDIF
	1363	ENDIF
	1364
	1365	!
[97]	1366	!-- Initial salinity profile
	1367	!-- Building output strings, starting with surface salinity
	1368	IF ( ocean ) THEN
	1369	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1370	gradients = '------'
	1371	slices = ' 0'
	1372	coordinates = ' 0.0'
	1373	i = 1
	1374	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1375
	1376	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1377	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1378
	1379	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1380	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1381
	1382	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1383	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1384
	1385	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1386	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1387
[430]	1388	IF ( i == 10 ) THEN
	1389	EXIT
	1390	ELSE
	1391	i = i + 1
	1392	ENDIF
	1393
[97]	1394	ENDDO
	1395
	1396	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1397	TRIM( gradients ), TRIM( slices )
	1398	ENDIF
	1399
	1400	!
[411]	1401	!-- Profile for the large scale vertial velocity
	1402	!-- Building output strings, starting with surface value
	1403	IF ( large_scale_subsidence ) THEN
	1404	temperatures = ' 0.0'
	1405	gradients = '------'
	1406	slices = ' 0'
	1407	coordinates = ' 0.0'
	1408	i = 1
[580]	1409	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1410
	1411	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1412	w_subs(subs_vertical_gradient_level_i(i))
[411]	1413	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1414
[580]	1415	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1416	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1417
[580]	1418	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1419	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1420
[580]	1421	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1422	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1423
[430]	1424	IF ( i == 10 ) THEN
	1425	EXIT
	1426	ELSE
	1427	i = i + 1
	1428	ENDIF
	1429
[411]	1430	ENDDO
	1431
	1432	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1433	TRIM( gradients ), TRIM( slices )
	1434	ENDIF
	1435
	1436	!
[824]	1437	!-- Cloud physcis parameters / quantities / numerical methods
	1438	WRITE ( io, 430 )
	1439	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1440	WRITE ( io, 431 )
	1441	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1442	WRITE ( io, 432 )
	1443	IF ( radiation ) WRITE ( io, 132 )
	1444	IF ( precipitation ) WRITE ( io, 133 )
	1445	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1446	WRITE ( io, 433 )
	1447	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1448	IF ( collision_kernel /= 'none' ) THEN
	1449	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1450	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1451	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1452	ENDIF
[825]	1453	ELSE
[828]	1454	WRITE ( io, 437 )
[825]	1455	ENDIF
[824]	1456	ENDIF
	1457
	1458	!
[1]	1459	!-- LES / turbulence parameters
	1460	WRITE ( io, 450 )
	1461
	1462	!--
	1463	! ... LES-constants used must still be added here
	1464	!--
	1465	IF ( constant_diffusion ) THEN
	1466	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1467	prandtl_number
	1468	ENDIF
	1469	IF ( .NOT. constant_diffusion) THEN
[108]	1470	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1471	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1472	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1473	ENDIF
	1474
	1475	!
	1476	!-- Special actions during the run
	1477	WRITE ( io, 470 )
	1478	IF ( create_disturbances ) THEN
	1479	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1480	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1481	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1482	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1483	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1484	ELSE
	1485	WRITE ( io, 473 ) disturbance_energy_limit
	1486	ENDIF
	1487	WRITE ( io, 474 ) TRIM( random_generator )
	1488	ENDIF
	1489	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1490	WRITE ( io, 475 ) pt_surface_initial_change
	1491	ENDIF
[75]	1492	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1493	WRITE ( io, 476 ) q_surface_initial_change
	1494	ENDIF
	1495	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1496	WRITE ( io, 477 ) q_surface_initial_change
	1497	ENDIF
	1498
[60]	1499	IF ( particle_advection ) THEN
[1]	1500	!
[60]	1501	!-- Particle attributes
	1502	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1503	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1504	end_time_prel, dt_sort_particles
[60]	1505	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1506	IF ( random_start_position ) WRITE ( io, 481 )
	1507	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1508	WRITE ( io, 495 ) total_number_of_particles
[824]	1509	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1510	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1511	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1512	WRITE ( io, 484 ) total_number_of_tails, &
	1513	minimum_tailpoint_distance, &
	1514	maximum_tailpoint_age
	1515	ENDIF
[1]	1516	ENDIF
[60]	1517	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1518	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1519	output_format = ' '
[60]	1520	IF ( netcdf_output ) THEN
[493]	1521	IF ( netcdf_data_format > 1 ) THEN
[60]	1522	output_format = 'netcdf (64 bit offset) and binary'
	1523	ELSE
	1524	output_format = 'netcdf and binary'
	1525	ENDIF
[1]	1526	ELSE
[60]	1527	output_format = 'binary'
[1]	1528	ENDIF
[292]	1529	WRITE ( io, 344 ) output_format
[1]	1530	ENDIF
[60]	1531	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1532	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1533
[60]	1534	WRITE ( io, 487 ) number_of_particle_groups
[1]	1535
[60]	1536	DO i = 1, number_of_particle_groups
	1537	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1538	WRITE ( io, 490 ) i, 0.0
	1539	WRITE ( io, 492 )
[1]	1540	ELSE
[60]	1541	WRITE ( io, 490 ) i, radius(i)
	1542	IF ( density_ratio(i) /= 0.0 ) THEN
	1543	WRITE ( io, 491 ) density_ratio(i)
	1544	ELSE
	1545	WRITE ( io, 492 )
	1546	ENDIF
[1]	1547	ENDIF
[60]	1548	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1549	pdx(i), pdy(i), pdz(i)
[336]	1550	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1551	ENDDO
[1]	1552
[60]	1553	ENDIF
[1]	1554
[60]	1555
[1]	1556	!
	1557	!-- Parameters of 1D-model
	1558	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1559	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1560	mixing_length_1d, dissipation_1d
	1561	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1562	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1563	ENDIF
	1564	ENDIF
	1565
	1566	!
	1567	!-- User-defined informations
	1568	CALL user_header( io )
	1569
	1570	WRITE ( io, 99 )
	1571
	1572	!
	1573	!-- Write buffer contents to disc immediately
[82]	1574	CALL local_flush( io )
[1]	1575
	1576	!
	1577	!-- Here the FORMATs start
	1578
	1579	99 FORMAT (1X,78('-'))
[200]	1580	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1581	1X,'* ',A,' *',9X,A/ &
	1582	1X,'***************************',9X,42('-'))
[291]	1583	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1584	37X,42('-'))
[200]	1585	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1586	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1587	' Run on host: ',A10)
[1]	1588	#if defined( __parallel )
[200]	1589	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1590	')',1X,A)
[200]	1591	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1592	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1593	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1594	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1595	37X,'because the job is running on an SMP-cluster')
[102]	1596	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1597	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1598	#endif
	1599	110 FORMAT (/' Numerical Schemes:'/ &
	1600	' -----------------'/)
	1601	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1602	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1603	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1604	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1605	' or Upstream')
	1606	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1607	' or Upstream')
	1608	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1609	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1610	' Translation velocity = ',A/ &
	1611	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1612	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1613	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1614	' maximum damping coefficient: ',F5.3, ' 1/s')
	1615	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1616	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1617	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1618	F6.2, ' K assumed')
[824]	1619	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1620	' effective emissivity scheme')
[824]	1621	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1622	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1623	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1624	A,'-cycle)'/ &
	1625	' number of grid levels: ',I2/ &
	1626	' Gauss-Seidel red/black iterations: ',I2)
	1627	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1628	I3,')')
	1629	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1630	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1631	I3,')'/ &
	1632	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1633	I3,')')
	1634	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1635	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1636	140 FORMAT (' maximum residual allowed: ',E10.3)
	1637	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1638	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1639	'step')
[87]	1640	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1641	'kinetic energy')
[927]	1642	144 FORMAT (' masking method is used')
[1]	1643	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1644	'conserved'/ &
	1645	' using the ',A,' mode')
	1646	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1647	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1648	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1649	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1650	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1651	'prognostic equation for')
	1652	154 FORMAT (' the potential temperature')
[1]	1653	200 FORMAT (//' Run time and time step information:'/ &
	1654	' ----------------------------------'/)
	1655	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1656	' CFL-factor: ',F4.2)
	1657	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1658	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1659	' End time: ',F9.3,' s')
	1660	204 FORMAT ( A,F9.3,' s')
	1661	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1662	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1663	' CPU-time used: ',F9.3,' s per timestep: ', &
	1664	' ',F9.3,' s'/ &
	1665	' per second of simulated tim', &
	1666	'e: ',F9.3,' s')
[291]	1667	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1668	250 FORMAT (//' Computational grid and domain size:'/ &
	1669	' ----------------------------------'// &
	1670	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1671	' m dz = ',F7.3,' m'/ &
	1672	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1673	' m z(u) = ',F10.3,' m'/)
	1674	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1675	' factor: ',F5.3/ &
	1676	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1677	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1678	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1679	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1680	' degrees')
	1681	270 FORMAT (//' Topography informations:'/ &
	1682	' -----------------------'// &
	1683	1X,'Topography: ',A)
	1684	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1685	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1686	' / ',I4)
[240]	1687	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1688	' direction' / &
	1689	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1690	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1691	278 FORMAT (' Topography grid definition convention:'/ &
	1692	' cell edge (staggered grid points'/ &
	1693	' (u in x-direction, v in y-direction))' /)
	1694	279 FORMAT (' Topography grid definition convention:'/ &
	1695	' cell center (scalar grid points)' /)
[138]	1696	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1697	' ------------------------------'// &
	1698	' Canopy mode: ', A / &
	1699	' Canopy top: ',I4 / &
	1700	' Leaf drag coefficient: ',F6.2 /)
[153]	1701	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1702	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1703	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1704	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1705	' Height: ',A,' m'/ &
	1706	' Leaf area density: ',A,' m2/m3'/ &
	1707	' Gradient: ',A,' m2/m4'/ &
	1708	' Gridpoint: ',A)
	1709
[1]	1710	300 FORMAT (//' Boundary conditions:'/ &
	1711	' -------------------'// &
	1712	' p uv ', &
	1713	' pt'// &
	1714	' B. bound.: ',A/ &
	1715	' T. bound.: ',A)
[97]	1716	301 FORMAT (/' ',A// &
[1]	1717	' B. bound.: ',A/ &
	1718	' T. bound.: ',A)
[19]	1719	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1720	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1721	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1722	'computational u,v-level:'// &
[978]	1723	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1724	' m kappa = ',F4.2/ &
[1]	1725	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1726	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1727	307 FORMAT (' Heatflux has a random normal distribution')
	1728	308 FORMAT (' Predefined surface temperature')
[97]	1729	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1730	310 FORMAT (//' 1D-Model:'// &
	1731	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1732	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1733	312 FORMAT (' Predefined surface humidity')
	1734	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1735	314 FORMAT (' Predefined scalar value at the surface')
[19]	1736	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1737	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1738	'atmosphere model')
[1]	1739	317 FORMAT (//' Lateral boundaries:'/ &
	1740	' left/right: ',A/ &
	1741	' north/south: ',A)
[978]	1742	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1743	'damping factor = ',F6.4)
[151]	1744	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1745	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1746	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1747	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1748	' v: ',F9.6,' m2/s2')
[151]	1749	325 FORMAT (//' List output:'/ &
[1]	1750	' -----------'// &
	1751	' 1D-Profiles:'/ &
	1752	' Output every ',F8.2,' s')
[151]	1753	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1754	' Averaging input every ',F8.2,' s')
	1755	330 FORMAT (//' Data output:'/ &
	1756	' -----------'/)
	1757	331 FORMAT (/' 1D-Profiles:')
	1758	332 FORMAT (/' ',A)
	1759	333 FORMAT (' Output every ',F8.2,' s',/ &
	1760	' Time averaged over ',F8.2,' s'/ &
	1761	' Averaging input every ',F8.2,' s')
	1762	334 FORMAT (/' 2D-Arrays',A,':')
	1763	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1764	' Output every ',F8.2,' s ',A/ &
	1765	' Cross sections at ',A1,' = ',A/ &
	1766	' scalar-coordinates: ',A,' m'/)
	1767	336 FORMAT (/' 3D-Arrays',A,':')
	1768	337 FORMAT (/' Arrays: ',A/ &
	1769	' Output every ',F8.2,' s ',A/ &
	1770	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1771	338 FORMAT (' Compressed data output'/ &
	1772	' Decimal precision: ',A/)
	1773	339 FORMAT (' No output during initial ',F8.2,' s')
	1774	340 FORMAT (/' Time series:')
	1775	341 FORMAT (' Output every ',F8.2,' s'/)
	1776	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1777	' Output every ',F8.2,' s ',A/ &
	1778	' Time averaged over ',F8.2,' s'/ &
	1779	' Averaging input every ',F8.2,' s'/ &
	1780	' Cross sections at ',A1,' = ',A/ &
	1781	' scalar-coordinates: ',A,' m'/)
	1782	343 FORMAT (/' Arrays: ',A/ &
	1783	' Output every ',F8.2,' s ',A/ &
	1784	' Time averaged over ',F8.2,' s'/ &
	1785	' Averaging input every ',F8.2,' s'/ &
	1786	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1787	344 FORMAT (' Output format: ',A/)
[410]	1788	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1789	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1790	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1791	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1792	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1793	347 FORMAT (' Variables: ',A/ &
	1794	' Output every ',F8.2,' s')
	1795	348 FORMAT (' Variables: ',A/ &
	1796	' Output every ',F8.2,' s'/ &
	1797	' Time averaged over ',F8.2,' s'/ &
	1798	' Averaging input every ',F8.2,' s')
	1799	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1800	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1801	13(' ',8(F8.2,',')/) )
	1802	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1803	'all gridpoints along ',A,'-direction (default).' )
	1804	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1805	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1806	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1807	#if defined( __dvrp_graphics )
	1808	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1809	' Output every ',F7.1,' s'/ &
	1810	' Output mode: ',A/ &
	1811	' Host / User: ',A,' / ',A/ &
	1812	' Directory: ',A// &
	1813	' The sequence contains:')
[337]	1814	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1815	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1816	362 FORMAT (/' Slicer plane ',A/ &
[336]	1817	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1818	363 FORMAT (/' Particles'/ &
[336]	1819	' particle size: ',F7.2,' m')
	1820	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1821	F6.2,',',F6.2,']')
[337]	1822	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1823	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1824	')'/ &
	1825	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1826	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1827	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1828	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1829	#endif
	1830	#if defined( __spectra )
	1831	370 FORMAT (' Spectra:')
	1832	371 FORMAT (' Output every ',F7.1,' s'/)
	1833	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1834	' Directions: ', 10(A5,',')/ &
[189]	1835	' height levels k = ', 20(I3,',')/ &
	1836	' ', 20(I3,',')/ &
	1837	' ', 20(I3,',')/ &
	1838	' ', 20(I3,',')/ &
	1839	' ', 19(I3,','),I3,'.'/ &
[1]	1840	' height levels selected for standard plot:'/ &
[189]	1841	' k = ', 20(I3,',')/ &
	1842	' ', 20(I3,',')/ &
	1843	' ', 20(I3,',')/ &
	1844	' ', 20(I3,',')/ &
	1845	' ', 19(I3,','),I3,'.'/ &
[1]	1846	' Time averaged over ', F7.1, ' s,' / &
	1847	' Profiles for the time averaging are taken every ', &
	1848	F6.1,' s')
	1849	#endif
	1850	400 FORMAT (//' Physical quantities:'/ &
	1851	' -------------------'/)
	1852	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1853	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1854	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1855	' f* = ',F9.6,' 1/s')
	1856	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1857	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1858	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1859	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1860	' ------------------------'/)
[57]	1861	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1862	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1863	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1864	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1865	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1866	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1867	' Height: ',A,' m'/ &
	1868	' Temperature: ',A,' K'/ &
	1869	' Gradient: ',A,' K/100m'/ &
	1870	' Gridpoint: ',A)
	1871	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1872	' Height: ',A,' m'/ &
	1873	' Humidity: ',A,' kg/kg'/ &
	1874	' Gradient: ',A,' (kg/kg)/100m'/ &
	1875	' Gridpoint: ',A)
	1876	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1877	' Height: ',A,' m'/ &
	1878	' Scalar concentration: ',A,' kg/m**3'/ &
	1879	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1880	' Gridpoint: ',A)
	1881	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1882	' Height: ',A,' m'/ &
	1883	' ug: ',A,' m/s'/ &
	1884	' Gradient: ',A,' 1/100s'/ &
	1885	' Gridpoint: ',A)
	1886	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1887	' Height: ',A,' m'/ &
[97]	1888	' vg: ',A,' m/s'/ &
[1]	1889	' Gradient: ',A,' 1/100s'/ &
	1890	' Gridpoint: ',A)
[97]	1891	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1892	' Height: ',A,' m'/ &
	1893	' Salinity: ',A,' psu'/ &
	1894	' Gradient: ',A,' psu/100m'/ &
	1895	' Gridpoint: ',A)
[411]	1896	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1897	' Height: ',A,' m'/ &
	1898	' w_subs: ',A,' m/s'/ &
	1899	' Gradient: ',A,' (m/s)/100m'/ &
	1900	' Gridpoint: ',A)
[767]	1901	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1902	' profiles')
[824]	1903	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1904	' ----------------------------------'/)
	1905	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1906	'on)')
	1907	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1908	' total water content is used.'/ &
	1909	' Condensation is parameterized via 0% - or 100% scheme.')
	1910	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1911	'icle model')
	1912	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1913	' droplets < 1.0E-6 m')
[825]	1914	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1915	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1916	'are used'/ &
	1917	' number of radius classes: ',I3,' interval ', &
	1918	'[1.0E-6,2.0E-4] m'/ &
	1919	' number of dissipation classes: ',I2,' interval ', &
	1920	'[0,1000] cm2/s3')
	1921	437 FORMAT (' Droplet collision is switched off')
[1]	1922	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1923	' ---------------------------'/)
[824]	1924	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1925	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1926	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1927	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1928	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1929	470 FORMAT (//' Actions during the simulation:'/ &
	1930	' -----------------------------'/)
[94]	1931	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1932	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1933	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1934	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1935	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1936	' to i/j =',I4)
	1937	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1938	1X,F5.3, ' m2/s2')
	1939	474 FORMAT (' Random number generator used : ',A/)
	1940	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1941	'respectively, if'/ &
	1942	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1943	' 3D-simulation'/)
	1944	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1945	'respectively, if the'/ &
	1946	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1947	' the 3D-simulation'/)
	1948	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1949	'respectively, if the'/ &
	1950	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1951	' the 3D-simulation'/)
	1952	480 FORMAT (' Particles:'/ &
	1953	' ---------'// &
	1954	' Particle advection is active (switched on at t = ', F7.1, &
	1955	' s)'/ &
	1956	' Start of new particle generations every ',F6.1,' s'/ &
	1957	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1958	' bottom: ', A, ' top: ', A/&
	1959	' Maximum particle age: ',F9.1,' s'/ &
[117]	1960	' Advection stopped at t = ',F9.1,' s'/ &
	1961	' Particles are sorted every ',F9.1,' s'/)
[1]	1962	481 FORMAT (' Particles have random start positions'/)
[336]	1963	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1964	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1965	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1966	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1967	' Maximum age of the end of the tail: ',F8.2,' s')
	1968	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1969	486 FORMAT (' Particle statistics are written on file'/)
	1970	487 FORMAT (' Number of particle groups: ',I2/)
	1971	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1972	' minimum timestep for advection: ', F7.5/)
	1973	489 FORMAT (' Number of particles simultaneously released at each ', &
	1974	'point: ', I5/)
	1975	490 FORMAT (' Particle group ',I2,':'/ &
	1976	' Particle radius: ',E10.3, 'm')
	1977	491 FORMAT (' Particle inertia is activated'/ &
	1978	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1979	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1980	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1981	' y:',F8.1,' - ',F8.1,' m'/&
	1982	' z:',F8.1,' - ',F8.1,' m'/&
	1983	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1984	' m dz = ',F8.1,' m'/)
	1985	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1986	F8.2,' s'/)
	1987	495 FORMAT (' Number of particles in total domain: ',I10/)
	1988	500 FORMAT (//' 1D-Model parameters:'/ &
	1989	' -------------------'// &
	1990	' Simulation time: ',F8.1,' s'/ &
	1991	' Run-controll output every: ',F8.1,' s'/ &
	1992	' Vertical profile output every: ',F8.1,' s'/ &
	1993	' Mixing length calculation: ',A/ &
	1994	' Dissipation calculation: ',A/)
	1995	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1996	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1997	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1998
	1999
	2000	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |