Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1067

Last change on this file since 1067 was 1037, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 76.4 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[941]	22	!
[1035]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1037 2012-10-22 14:10:22Z maronga $
	27	!
[1037]	28	! 1036 2012-10-22 13:43:42Z raasch
	29	! code put under GPL (PALM 3.9)
	30	!
[1035]	31	! 1031 2012-10-19 14:35:30Z raasch
	32	! output of netCDF data format modified
	33	!
[1017]	34	! 1015 2012-09-27 09:23:24Z raasch
	35	! output of Aajustment of mixing length to the Prandtl mixing length at first
	36	! grid point above ground removed
	37	!
[1004]	38	! 1003 2012-09-14 14:35:53Z raasch
	39	! output of information about equal/unequal subdomain size removed
	40	!
[1002]	41	! 1001 2012-09-13 14:08:46Z raasch
	42	! all actions concerning leapfrog- and upstream-spline-scheme removed
	43	!
[979]	44	! 978 2012-08-09 08:28:32Z fricke
	45	! -km_damp_max, outflow_damping_width
	46	! +pt_damping_factor, pt_damping_width
	47	! +z0h
	48	!
[965]	49	! 964 2012-07-26 09:14:24Z raasch
	50	! output of profil-related quantities removed
	51	!
[941]	52	! 940 2012-07-09 14:31:00Z raasch
	53	! Output in case of simulations for pure neutral stratification (no pt-equation
	54	! solved)
	55	!
[928]	56	! 927 2012-06-06 19:15:04Z raasch
	57	! output of masking_method for mg-solver
	58	!
[869]	59	! 868 2012-03-28 12:21:07Z raasch
	60	! translation velocity in Galilean transformation changed to 0.6 * ug
	61	!
[834]	62	! 833 2012-02-22 08:55:55Z maronga
	63	! Adjusted format for leaf area density
	64	!
[829]	65	! 828 2012-02-21 12:00:36Z raasch
	66	! output of dissipation_classes + radius_classes
	67	!
[826]	68	! 825 2012-02-19 03:03:44Z raasch
	69	! Output of cloud physics parameters/quantities complemented and restructured
	70	!
[768]	71	! 767 2011-10-14 06:39:12Z raasch
	72	! Output of given initial u,v-profiles
	73	!
[760]	74	! 759 2011-09-15 13:58:31Z raasch
	75	! output of maximum number of parallel io streams
	76	!
[708]	77	! 707 2011-03-29 11:39:40Z raasch
	78	! bc_lr/ns replaced by bc_lr/ns_cyc
	79	!
[668]	80	! 667 2010-12-23 12:06:00Z suehring/gryschka
	81	! Output of advection scheme.
	82	! Modified output of Prandtl-layer height.
	83	!
[581]	84	! 580 2010-10-05 13:59:11Z heinze
	85	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	86	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	87	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	88	!
[494]	89	! 493 2010-03-01 08:30:24Z raasch
	90	! NetCDF data output format extendend for NetCDF4/HDF5
	91	!
[482]	92	! 449 2010-02-02 11:23:59Z raasch
	93	! +large scale vertical motion (subsidence/ascent)
	94	! Bugfix: index problem concerning gradient_level indices removed
	95	!
[449]	96	! 410 2009-12-04 17:05:40Z letzel
	97	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	98	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	99	!
[392]	100	! 346 2009-07-06 10:13:41Z raasch
[328]	101	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	102	! Coupling with independent precursor runs.
[254]	103	! Output of messages replaced by message handling routine.
[336]	104	! Output of several additional dvr parameters
[240]	105	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	106	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	107	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	108	! topography_grid_convention moved from user_header
[292]	109	! small bugfix concerning 3d 64bit netcdf output format
[1]	110	!
[226]	111	! 206 2008-10-13 14:59:11Z raasch
	112	! Bugfix: error in zu index in case of section_xy = -1
	113	!
[200]	114	! 198 2008-09-17 08:55:28Z raasch
	115	! Format adjustments allowing output of larger revision numbers
	116	!
[198]	117	! 197 2008-09-16 15:29:03Z raasch
	118	! allow 100 spectra levels instead of 10 for consistency with
	119	! define_netcdf_header,
	120	! bugfix in the output of the characteristic levels of potential temperature,
	121	! geostrophic wind, scalar concentration, humidity and leaf area density,
	122	! output of turbulence recycling informations
	123	!
[139]	124	! 138 2007-11-28 10:03:58Z letzel
	125	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	126	! Allow two instead of one digit to specify isosurface and slicer variables.
	127	! Output of sorting frequency of particles
	128	!
[110]	129	! 108 2007-08-24 15:10:38Z letzel
	130	! Output of informations for coupled model runs (boundary conditions etc.)
	131	! + output of momentumfluxes at the top boundary
	132	! Rayleigh damping for ocean, e_init
	133	!
[98]	134	! 97 2007-06-21 08:23:15Z raasch
	135	! Adjustments for the ocean version.
	136	! use_pt_reference renamed use_reference
	137	!
[90]	138	! 87 2007-05-22 15:46:47Z raasch
	139	! Bugfix: output of use_upstream_for_tke
	140	!
[83]	141	! 82 2007-04-16 15:40:52Z raasch
	142	! Preprocessor strings for different linux clusters changed to "lc",
	143	! routine local_flush is used for buffer flushing
	144	!
[77]	145	! 76 2007-03-29 00:58:32Z raasch
	146	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	147	! output of the loop optimization method, moisture renamed humidity,
	148	! output of subversion revision number
	149	!
[39]	150	! 19 2007-02-23 04:53:48Z raasch
	151	! Output of scalar flux applied at top boundary
	152	!
[3]	153	! RCS Log replace by Id keyword, revision history cleaned up
	154	!
[1]	155	! Revision 1.63 2006/08/22 13:53:13 raasch
	156	! Output of dz_max
	157	!
	158	! Revision 1.1 1997/08/11 06:17:20 raasch
	159	! Initial revision
	160	!
	161	!
	162	! Description:
	163	! ------------
	164	! Writing a header with all important informations about the actual run.
	165	! This subroutine is called three times, two times at the beginning
	166	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	167	! end of the run, then writing additional information about CPU-usage on file
	168	! header.
[411]	169	!-----------------------------------------------------------------------------!
[1]	170
	171	USE arrays_3d
	172	USE control_parameters
	173	USE cloud_parameters
	174	USE cpulog
	175	USE dvrp_variables
	176	USE grid_variables
	177	USE indices
	178	USE model_1d
	179	USE particle_attributes
	180	USE pegrid
[411]	181	USE subsidence_mod
[1]	182	USE spectrum
	183
	184	IMPLICIT NONE
	185
	186	CHARACTER (LEN=1) :: prec
	187	CHARACTER (LEN=2) :: do2d_mode
	188	CHARACTER (LEN=5) :: section_chr
	189	CHARACTER (LEN=9) :: time_to_string
	190	CHARACTER (LEN=10) :: coor_chr, host_chr
	191	CHARACTER (LEN=16) :: begin_chr
[200]	192	CHARACTER (LEN=23) :: ver_rev
[1]	193	CHARACTER (LEN=40) :: output_format
[167]	194	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	195	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	196	domask_chr, run_classification
[167]	197	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	198	temperatures, ugcomponent, vgcomponent
[1]	199	CHARACTER (LEN=85) :: roben, runten
	200
[410]	201	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	202
	203	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	204	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	205	REAL :: cpuseconds_per_simulated_second
	206
	207	!
	208	!-- Open the output file. At the end of the simulation, output is directed
	209	!-- to unit 19.
	210	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	211	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	212	io = 15 ! header output on file RUN_CONTROL
	213	ELSE
	214	io = 19 ! header output on file HEADER
	215	ENDIF
	216	CALL check_open( io )
	217
	218	!
	219	!-- At the end of the run, output file (HEADER) will be rewritten with
	220	!-- new informations
	221	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	222
	223	!
	224	!-- Determine kind of model run
	225	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	226	run_classification = '3D - restart run'
[328]	227	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	228	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	229	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	230	run_classification = '3D - run without 1D - prerun'
[197]	231	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	232	run_classification = '3D - run with 1D - prerun'
[197]	233	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	234	run_classification = '3D - run initialized by user'
[1]	235	ELSE
[254]	236	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	237	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	238	ENDIF
[97]	239	IF ( ocean ) THEN
	240	run_classification = 'ocean - ' // run_classification
	241	ELSE
	242	run_classification = 'atmosphere - ' // run_classification
	243	ENDIF
[1]	244
	245	!
	246	!-- Run-identification, date, time, host
	247	host_chr = host(1:10)
[75]	248	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	249	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	250	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	251	#if defined( __mpi2 )
	252	mpi_type = 2
	253	#else
	254	mpi_type = 1
	255	#endif
	256	WRITE ( io, 101 ) mpi_type, coupling_mode
	257	ENDIF
[102]	258	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	259	ADJUSTR( host_chr )
[1]	260	#if defined( __parallel )
	261	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	262	char1 = 'calculated'
	263	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	264	host(1:2) == 'lc' ) .AND. &
	265	npex == -1 .AND. pdims(2) == 1 ) THEN
	266	char1 = 'forced'
	267	ELSE
	268	char1 = 'predefined'
	269	ENDIF
	270	IF ( threads_per_task == 1 ) THEN
[102]	271	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	272	ELSE
[102]	273	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	274	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	275	ENDIF
	276	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	277	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	278	npex == -1 .AND. pdims(2) == 1 ) &
	279	THEN
[102]	280	WRITE ( io, 106 )
[1]	281	ELSEIF ( pdims(2) == 1 ) THEN
[102]	282	WRITE ( io, 107 ) 'x'
[1]	283	ELSEIF ( pdims(1) == 1 ) THEN
[102]	284	WRITE ( io, 107 ) 'y'
[1]	285	ENDIF
[102]	286	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	287	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	288	WRITE ( io, 108 ) maximum_parallel_io_streams
	289	ENDIF
[1]	290	#endif
	291	WRITE ( io, 99 )
	292
	293	!
	294	!-- Numerical schemes
	295	WRITE ( io, 110 )
	296	IF ( psolver(1:7) == 'poisfft' ) THEN
	297	WRITE ( io, 111 ) TRIM( fft_method )
	298	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	299	ELSEIF ( psolver == 'sor' ) THEN
	300	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	301	ELSEIF ( psolver == 'multigrid' ) THEN
	302	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	303	IF ( mg_cycles == -1 ) THEN
	304	WRITE ( io, 140 ) residual_limit
	305	ELSE
	306	WRITE ( io, 141 ) mg_cycles
	307	ENDIF
	308	IF ( mg_switch_to_pe0_level == 0 ) THEN
	309	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	310	nzt_mg(1)
[197]	311	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	312	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	313	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	314	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	315	nzt_mg(mg_switch_to_pe0_level), &
	316	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	317	nzt_mg(1)
	318	ENDIF
[927]	319	IF ( masking_method ) WRITE ( io, 144 )
[1]	320	ENDIF
	321	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	322	THEN
	323	WRITE ( io, 142 )
	324	ENDIF
	325
	326	IF ( momentum_advec == 'pw-scheme' ) THEN
	327	WRITE ( io, 113 )
[667]	328	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	329	WRITE ( io, 503 )
[1]	330	ENDIF
	331	IF ( scalar_advec == 'pw-scheme' ) THEN
	332	WRITE ( io, 116 )
[667]	333	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	334	WRITE ( io, 504 )
[1]	335	ELSE
	336	WRITE ( io, 118 )
	337	ENDIF
[63]	338
	339	WRITE ( io, 139 ) TRIM( loop_optimization )
	340
[1]	341	IF ( galilei_transformation ) THEN
	342	IF ( use_ug_for_galilei_tr ) THEN
[868]	343	char1 = '0.6 * geostrophic wind'
[1]	344	ELSE
	345	char1 = 'mean wind in model domain'
	346	ENDIF
	347	IF ( simulated_time_at_begin == simulated_time ) THEN
	348	char2 = 'at the start of the run'
	349	ELSE
	350	char2 = 'at the end of the run'
	351	ENDIF
	352	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	353	advected_distance_x/1000.0, advected_distance_y/1000.0
	354	ENDIF
[1001]	355	WRITE ( io, 122 ) timestep_scheme
[87]	356	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	357	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	358	IF ( .NOT. ocean ) THEN
	359	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	360	rayleigh_damping_factor
	361	ELSE
	362	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	363	rayleigh_damping_factor
	364	ENDIF
[1]	365	ENDIF
[940]	366	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	367	IF ( humidity ) THEN
[1]	368	IF ( .NOT. cloud_physics ) THEN
	369	WRITE ( io, 129 )
	370	ELSE
	371	WRITE ( io, 130 )
	372	ENDIF
	373	ENDIF
	374	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	375	IF ( conserve_volume_flow ) THEN
[241]	376	WRITE ( io, 150 ) conserve_volume_flow_mode
	377	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	378	WRITE ( io, 151 ) u_bulk, v_bulk
	379	ENDIF
[240]	380	ELSEIF ( dp_external ) THEN
	381	IF ( dp_smooth ) THEN
[241]	382	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	383	ELSE
[241]	384	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	385	ENDIF
	386	ENDIF
[411]	387	IF ( large_scale_subsidence ) THEN
	388	WRITE ( io, 153 )
	389	WRITE ( io, 154 )
	390	ENDIF
[1]	391	WRITE ( io, 99 )
	392
	393	!
	394	!-- Runtime and timestep informations
	395	WRITE ( io, 200 )
	396	IF ( .NOT. dt_fixed ) THEN
	397	WRITE ( io, 201 ) dt_max, cfl_factor
	398	ELSE
	399	WRITE ( io, 202 ) dt
	400	ENDIF
	401	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	402
	403	IF ( time_restart /= 9999999.9 .AND. &
	404	simulated_time_at_begin == simulated_time ) THEN
	405	IF ( dt_restart == 9999999.9 ) THEN
	406	WRITE ( io, 204 ) ' Restart at: ',time_restart
	407	ELSE
	408	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	409	ENDIF
	410	ENDIF
	411
	412	IF ( simulated_time_at_begin /= simulated_time ) THEN
	413	i = MAX ( log_point_s(10)%counts, 1 )
	414	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	415	cpuseconds_per_simulated_second = 0.0
	416	ELSE
	417	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	418	( simulated_time - &
	419	simulated_time_at_begin )
	420	ENDIF
	421	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	422	log_point_s(10)%sum / REAL( i ), &
	423	cpuseconds_per_simulated_second
	424	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	425	IF ( dt_restart == 9999999.9 ) THEN
	426	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	427	ELSE
	428	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	429	ENDIF
	430	ENDIF
	431	ENDIF
	432
	433	!
[291]	434	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	435	!-- and ocean are used. In this case, coupling_start_time defines the time
	436	!-- when the coupling is switched on.
	437	IF ( coupling_start_time /= 0.0 ) THEN
	438	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	439	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	440	ELSE
	441	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	442	'precursor runs'
	443	ENDIF
	444	WRITE ( io, 207 ) char1, coupling_start_time
	445	ENDIF
	446
	447	!
[1]	448	!-- Computational grid
[94]	449	IF ( .NOT. ocean ) THEN
	450	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	451	IF ( dz_stretch_level_index < nzt+1 ) THEN
	452	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	453	dz_stretch_factor, dz_max
	454	ENDIF
	455	ELSE
	456	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	457	IF ( dz_stretch_level_index > 0 ) THEN
	458	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	459	dz_stretch_factor, dz_max
	460	ENDIF
[1]	461	ENDIF
	462	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	463	MIN( nnz+2, nzt+2 )
	464	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	465
	466	!
	467	!-- Topography
	468	WRITE ( io, 270 ) topography
	469	SELECT CASE ( TRIM( topography ) )
	470
	471	CASE ( 'flat' )
	472	! no actions necessary
	473
	474	CASE ( 'single_building' )
	475	blx = INT( building_length_x / dx )
	476	bly = INT( building_length_y / dy )
	477	bh = INT( building_height / dz )
	478
	479	IF ( building_wall_left == 9999999.9 ) THEN
	480	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	481	ENDIF
	482	bxl = INT ( building_wall_left / dx + 0.5 )
	483	bxr = bxl + blx
	484
	485	IF ( building_wall_south == 9999999.9 ) THEN
	486	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	487	ENDIF
	488	bys = INT ( building_wall_south / dy + 0.5 )
	489	byn = bys + bly
	490
	491	WRITE ( io, 271 ) building_length_x, building_length_y, &
	492	building_height, bxl, bxr, bys, byn
	493
[240]	494	CASE ( 'single_street_canyon' )
	495	ch = NINT( canyon_height / dz )
	496	IF ( canyon_width_x /= 9999999.9 ) THEN
	497	!
	498	!-- Street canyon in y direction
	499	cwx = NINT( canyon_width_x / dx )
	500	IF ( canyon_wall_left == 9999999.9 ) THEN
	501	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	502	ENDIF
	503	cxl = NINT( canyon_wall_left / dx )
	504	cxr = cxl + cwx
	505	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	506
	507	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	508	!
	509	!-- Street canyon in x direction
	510	cwy = NINT( canyon_width_y / dy )
	511	IF ( canyon_wall_south == 9999999.9 ) THEN
	512	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	513	ENDIF
	514	cys = NINT( canyon_wall_south / dy )
	515	cyn = cys + cwy
	516	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	517	ENDIF
	518
[1]	519	END SELECT
	520
[256]	521	IF ( TRIM( topography ) /= 'flat' ) THEN
	522	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	523	IF ( TRIM( topography ) == 'single_building' .OR. &
	524	TRIM( topography ) == 'single_street_canyon' ) THEN
	525	WRITE ( io, 278 )
	526	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	527	WRITE ( io, 279 )
	528	ENDIF
	529	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	530	WRITE ( io, 278 )
	531	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	532	WRITE ( io, 279 )
	533	ENDIF
	534	ENDIF
	535
[138]	536	IF ( plant_canopy ) THEN
	537
	538	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	539	IF ( passive_scalar ) THEN
	540	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	541	leaf_surface_concentration
	542	ENDIF
[138]	543
[1]	544	!
[153]	545	!-- Heat flux at the top of vegetation
	546	WRITE ( io, 282 ) cthf
	547
	548	!
[138]	549	!-- Leaf area density profile
	550	!-- Building output strings, starting with surface value
[833]	551	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	552	gradients = '------'
	553	slices = ' 0'
	554	coordinates = ' 0.0'
	555	i = 1
	556	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	557
	558	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	559	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	560
	561	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	562	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	563
	564	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	565	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	566
	567	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	568	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	569
	570	i = i + 1
	571	ENDDO
	572
[153]	573	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	574	TRIM( gradients ), TRIM( slices )
	575
	576	ENDIF
	577
	578	!
[1]	579	!-- Boundary conditions
	580	IF ( ibc_p_b == 0 ) THEN
	581	runten = 'p(0) = 0 \|'
	582	ELSEIF ( ibc_p_b == 1 ) THEN
	583	runten = 'p(0) = p(1) \|'
	584	ELSE
	585	runten = 'p(0) = p(1) +R\|'
	586	ENDIF
	587	IF ( ibc_p_t == 0 ) THEN
	588	roben = 'p(nzt+1) = 0 \|'
	589	ELSE
	590	roben = 'p(nzt+1) = p(nzt) \|'
	591	ENDIF
	592
	593	IF ( ibc_uv_b == 0 ) THEN
	594	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	595	ELSE
	596	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	597	ENDIF
[132]	598	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	599	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	600	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	601	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	602	ELSE
	603	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	604	ENDIF
	605
	606	IF ( ibc_pt_b == 0 ) THEN
	607	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	608	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	609	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	610	ELSEIF ( ibc_pt_b == 2 ) THEN
	611	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	612	ENDIF
	613	IF ( ibc_pt_t == 0 ) THEN
[19]	614	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	615	ELSEIF( ibc_pt_t == 1 ) THEN
	616	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	617	ELSEIF( ibc_pt_t == 2 ) THEN
	618	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	619
[1]	620	ENDIF
	621
	622	WRITE ( io, 300 ) runten, roben
	623
	624	IF ( .NOT. constant_diffusion ) THEN
	625	IF ( ibc_e_b == 1 ) THEN
	626	runten = 'e(0) = e(1)'
	627	ELSE
	628	runten = 'e(0) = e(1) = (u/0.1)*2'
	629	ENDIF
	630	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	631
[97]	632	WRITE ( io, 301 ) 'e', runten, roben
[1]	633
	634	ENDIF
	635
[97]	636	IF ( ocean ) THEN
	637	runten = 'sa(0) = sa(1)'
	638	IF ( ibc_sa_t == 0 ) THEN
	639	roben = 'sa(nzt+1) = sa_surface'
[1]	640	ELSE
[97]	641	roben = 'sa(nzt+1) = sa(nzt)'
[1]	642	ENDIF
[97]	643	WRITE ( io, 301 ) 'sa', runten, roben
	644	ENDIF
[1]	645
[97]	646	IF ( humidity ) THEN
	647	IF ( ibc_q_b == 0 ) THEN
	648	runten = 'q(0) = q_surface'
	649	ELSE
	650	runten = 'q(0) = q(1)'
	651	ENDIF
	652	IF ( ibc_q_t == 0 ) THEN
	653	roben = 'q(nzt) = q_top'
	654	ELSE
	655	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	656	ENDIF
	657	WRITE ( io, 301 ) 'q', runten, roben
	658	ENDIF
[1]	659
[97]	660	IF ( passive_scalar ) THEN
	661	IF ( ibc_q_b == 0 ) THEN
	662	runten = 's(0) = s_surface'
	663	ELSE
	664	runten = 's(0) = s(1)'
	665	ENDIF
	666	IF ( ibc_q_t == 0 ) THEN
	667	roben = 's(nzt) = s_top'
	668	ELSE
	669	roben = 's(nzt) = s(nzt-1) + ds/dz'
	670	ENDIF
	671	WRITE ( io, 301 ) 's', runten, roben
[1]	672	ENDIF
	673
	674	IF ( use_surface_fluxes ) THEN
	675	WRITE ( io, 303 )
	676	IF ( constant_heatflux ) THEN
	677	WRITE ( io, 306 ) surface_heatflux
	678	IF ( random_heatflux ) WRITE ( io, 307 )
	679	ENDIF
[75]	680	IF ( humidity .AND. constant_waterflux ) THEN
[1]	681	WRITE ( io, 311 ) surface_waterflux
	682	ENDIF
	683	IF ( passive_scalar .AND. constant_waterflux ) THEN
	684	WRITE ( io, 313 ) surface_waterflux
	685	ENDIF
	686	ENDIF
	687
[19]	688	IF ( use_top_fluxes ) THEN
	689	WRITE ( io, 304 )
[102]	690	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	691	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	692	IF ( constant_top_heatflux ) THEN
	693	WRITE ( io, 306 ) top_heatflux
	694	ENDIF
	695	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	696	WRITE ( io, 316 )
[19]	697	ENDIF
[97]	698	IF ( ocean .AND. constant_top_salinityflux ) THEN
	699	WRITE ( io, 309 ) top_salinityflux
	700	ENDIF
[75]	701	IF ( humidity .OR. passive_scalar ) THEN
[19]	702	WRITE ( io, 315 )
	703	ENDIF
	704	ENDIF
	705
[1]	706	IF ( prandtl_layer ) THEN
[978]	707	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	708	z0h_factor*roughness_length, kappa, &
[94]	709	rif_min, rif_max
[1]	710	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	711	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	712	WRITE ( io, 312 )
	713	ENDIF
	714	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	715	WRITE ( io, 314 )
	716	ENDIF
	717	ELSE
	718	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	719	WRITE ( io, 310 ) rif_min, rif_max
	720	ENDIF
	721	ENDIF
	722
	723	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	724	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	725	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	726	IF ( turbulent_inflow ) THEN
	727	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	728	inflow_damping_height, inflow_damping_width
	729	ENDIF
[1]	730	ENDIF
	731
	732	!
	733	!-- Listing of 1D-profiles
[151]	734	WRITE ( io, 325 ) dt_dopr_listing
[1]	735	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	736	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	737	ENDIF
	738
	739	!
	740	!-- DATA output
	741	WRITE ( io, 330 )
	742	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	743	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	744	ENDIF
	745
	746	!
	747	!-- 1D-profiles
[346]	748	dopr_chr = 'Profile:'
[1]	749	IF ( dopr_n /= 0 ) THEN
	750	WRITE ( io, 331 )
	751
	752	output_format = ''
	753	IF ( netcdf_output ) THEN
[1031]	754	output_format = output_format_netcdf
[1]	755	ENDIF
[292]	756	WRITE ( io, 344 ) output_format
[1]	757
	758	DO i = 1, dopr_n
	759	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	760	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	761	WRITE ( io, 332 ) dopr_chr
	762	dopr_chr = ' :'
	763	ENDIF
	764	ENDDO
	765
	766	IF ( dopr_chr /= '' ) THEN
	767	WRITE ( io, 332 ) dopr_chr
	768	ENDIF
	769	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	770	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	771	ENDIF
	772
	773	!
	774	!-- 2D-arrays
	775	DO av = 0, 1
	776
	777	i = 1
	778	do2d_xy = ''
	779	do2d_xz = ''
	780	do2d_yz = ''
	781	DO WHILE ( do2d(av,i) /= ' ' )
	782
	783	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	784	do2d_mode = do2d(av,i)(l-1:l)
	785
	786	SELECT CASE ( do2d_mode )
	787	CASE ( 'xy' )
	788	ll = LEN_TRIM( do2d_xy )
	789	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	790	CASE ( 'xz' )
	791	ll = LEN_TRIM( do2d_xz )
	792	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	793	CASE ( 'yz' )
	794	ll = LEN_TRIM( do2d_yz )
	795	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	796	END SELECT
	797
	798	i = i + 1
	799
	800	ENDDO
	801
	802	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	803	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	804	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	805	( netcdf_output .OR. iso2d_output ) ) THEN
	806
	807	IF ( av == 0 ) THEN
	808	WRITE ( io, 334 ) ''
	809	ELSE
	810	WRITE ( io, 334 ) '(time-averaged)'
	811	ENDIF
	812
	813	IF ( do2d_at_begin ) THEN
	814	begin_chr = 'and at the start'
	815	ELSE
	816	begin_chr = ''
	817	ENDIF
	818
	819	output_format = ''
	820	IF ( netcdf_output ) THEN
[1031]	821	output_format = output_format_netcdf
[1]	822	ENDIF
	823	IF ( iso2d_output ) THEN
	824	IF ( netcdf_output ) THEN
[1031]	825	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	826	ELSE
	827	output_format = 'iso2d'
	828	ENDIF
	829	ENDIF
[292]	830	WRITE ( io, 344 ) output_format
[1]	831
	832	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	833	i = 1
	834	slices = '/'
	835	coordinates = '/'
	836	!
	837	!-- Building strings with index and coordinate informations of the
	838	!-- slices
	839	DO WHILE ( section(i,1) /= -9999 )
	840
	841	WRITE (section_chr,'(I5)') section(i,1)
	842	section_chr = ADJUSTL( section_chr )
	843	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	844
[206]	845	IF ( section(i,1) == -1 ) THEN
	846	WRITE (coor_chr,'(F10.1)') -1.0
	847	ELSE
	848	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	849	ENDIF
[1]	850	coor_chr = ADJUSTL( coor_chr )
	851	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	852
	853	i = i + 1
	854	ENDDO
	855	IF ( av == 0 ) THEN
	856	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	857	TRIM( begin_chr ), 'k', TRIM( slices ), &
	858	TRIM( coordinates )
	859	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	860	WRITE ( io, 339 ) skip_time_do2d_xy
	861	ENDIF
	862	ELSE
	863	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	864	TRIM( begin_chr ), averaging_interval, &
	865	dt_averaging_input, 'k', TRIM( slices ), &
	866	TRIM( coordinates )
	867	IF ( skip_time_data_output_av /= 0.0 ) THEN
	868	WRITE ( io, 339 ) skip_time_data_output_av
	869	ENDIF
	870	ENDIF
	871
	872	ENDIF
	873
	874	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	875	i = 1
	876	slices = '/'
	877	coordinates = '/'
	878	!
	879	!-- Building strings with index and coordinate informations of the
	880	!-- slices
	881	DO WHILE ( section(i,2) /= -9999 )
	882
	883	WRITE (section_chr,'(I5)') section(i,2)
	884	section_chr = ADJUSTL( section_chr )
	885	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	886
	887	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	888	coor_chr = ADJUSTL( coor_chr )
	889	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	890
	891	i = i + 1
	892	ENDDO
	893	IF ( av == 0 ) THEN
	894	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	895	TRIM( begin_chr ), 'j', TRIM( slices ), &
	896	TRIM( coordinates )
	897	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	898	WRITE ( io, 339 ) skip_time_do2d_xz
	899	ENDIF
	900	ELSE
	901	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	902	TRIM( begin_chr ), averaging_interval, &
	903	dt_averaging_input, 'j', TRIM( slices ), &
	904	TRIM( coordinates )
	905	IF ( skip_time_data_output_av /= 0.0 ) THEN
	906	WRITE ( io, 339 ) skip_time_data_output_av
	907	ENDIF
	908	ENDIF
	909	ENDIF
	910
	911	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	912	i = 1
	913	slices = '/'
	914	coordinates = '/'
	915	!
	916	!-- Building strings with index and coordinate informations of the
	917	!-- slices
	918	DO WHILE ( section(i,3) /= -9999 )
	919
	920	WRITE (section_chr,'(I5)') section(i,3)
	921	section_chr = ADJUSTL( section_chr )
	922	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	923
	924	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	925	coor_chr = ADJUSTL( coor_chr )
	926	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	927
	928	i = i + 1
	929	ENDDO
	930	IF ( av == 0 ) THEN
	931	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	932	TRIM( begin_chr ), 'i', TRIM( slices ), &
	933	TRIM( coordinates )
	934	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	935	WRITE ( io, 339 ) skip_time_do2d_yz
	936	ENDIF
	937	ELSE
	938	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	939	TRIM( begin_chr ), averaging_interval, &
	940	dt_averaging_input, 'i', TRIM( slices ), &
	941	TRIM( coordinates )
	942	IF ( skip_time_data_output_av /= 0.0 ) THEN
	943	WRITE ( io, 339 ) skip_time_data_output_av
	944	ENDIF
	945	ENDIF
	946	ENDIF
	947
	948	ENDIF
	949
	950	ENDDO
	951
	952	!
	953	!-- 3d-arrays
	954	DO av = 0, 1
	955
	956	i = 1
	957	do3d_chr = ''
	958	DO WHILE ( do3d(av,i) /= ' ' )
	959
	960	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	961	i = i + 1
	962
	963	ENDDO
	964
	965	IF ( do3d_chr /= '' ) THEN
	966	IF ( av == 0 ) THEN
	967	WRITE ( io, 336 ) ''
	968	ELSE
	969	WRITE ( io, 336 ) '(time-averaged)'
	970	ENDIF
	971
	972	output_format = ''
	973	IF ( netcdf_output ) THEN
[1031]	974	output_format = output_format_netcdf
[1]	975	ENDIF
	976	IF ( avs_output ) THEN
	977	IF ( netcdf_output ) THEN
[1031]	978	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	979	ELSE
	980	output_format = 'avs'
	981	ENDIF
	982	ENDIF
[292]	983	WRITE ( io, 344 ) output_format
[1]	984
	985	IF ( do3d_at_begin ) THEN
	986	begin_chr = 'and at the start'
	987	ELSE
	988	begin_chr = ''
	989	ENDIF
	990	IF ( av == 0 ) THEN
	991	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	992	zu(nz_do3d), nz_do3d
	993	ELSE
	994	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	995	TRIM( begin_chr ), averaging_interval, &
	996	dt_averaging_input, zu(nz_do3d), nz_do3d
	997	ENDIF
	998
	999	IF ( do3d_compress ) THEN
	1000	do3d_chr = ''
	1001	i = 1
	1002	DO WHILE ( do3d(av,i) /= ' ' )
	1003
	1004	SELECT CASE ( do3d(av,i) )
	1005	CASE ( 'u' )
	1006	j = 1
	1007	CASE ( 'v' )
	1008	j = 2
	1009	CASE ( 'w' )
	1010	j = 3
	1011	CASE ( 'p' )
	1012	j = 4
	1013	CASE ( 'pt' )
	1014	j = 5
	1015	END SELECT
	1016	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1017	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1018	':' // prec // ','
	1019	i = i + 1
	1020
	1021	ENDDO
	1022	WRITE ( io, 338 ) do3d_chr
	1023
	1024	ENDIF
	1025
	1026	IF ( av == 0 ) THEN
	1027	IF ( skip_time_do3d /= 0.0 ) THEN
	1028	WRITE ( io, 339 ) skip_time_do3d
	1029	ENDIF
	1030	ELSE
	1031	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1032	WRITE ( io, 339 ) skip_time_data_output_av
	1033	ENDIF
	1034	ENDIF
	1035
	1036	ENDIF
	1037
	1038	ENDDO
	1039
	1040	!
[410]	1041	!-- masked arrays
	1042	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1043	mask_scale_x, mask_scale_y, mask_scale_z
	1044	DO mid = 1, masks
	1045	DO av = 0, 1
	1046
	1047	i = 1
	1048	domask_chr = ''
	1049	DO WHILE ( domask(mid,av,i) /= ' ' )
	1050	domask_chr = TRIM( domask_chr ) // ' ' // &
	1051	TRIM( domask(mid,av,i) ) // ','
	1052	i = i + 1
	1053	ENDDO
	1054
	1055	IF ( domask_chr /= '' ) THEN
	1056	IF ( av == 0 ) THEN
	1057	WRITE ( io, 346 ) '', mid
	1058	ELSE
	1059	WRITE ( io, 346 ) ' (time-averaged)', mid
	1060	ENDIF
	1061
[1031]	1062	output_format = ' '
[410]	1063	IF ( netcdf_output ) THEN
[1031]	1064	output_format = output_format_netcdf
[410]	1065	ENDIF
	1066	WRITE ( io, 344 ) output_format
	1067
	1068	IF ( av == 0 ) THEN
	1069	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1070	ELSE
	1071	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1072	averaging_interval, dt_averaging_input
	1073	ENDIF
	1074
	1075	IF ( av == 0 ) THEN
	1076	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1077	WRITE ( io, 339 ) skip_time_domask(mid)
	1078	ENDIF
	1079	ELSE
	1080	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1081	WRITE ( io, 339 ) skip_time_data_output_av
	1082	ENDIF
	1083	ENDIF
	1084	!
	1085	!-- output locations
	1086	DO dim = 1, 3
	1087	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1088	count = 0
	1089	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1090	count = count + 1
	1091	ENDDO
	1092	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1093	mask(mid,dim,:count)
	1094	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1095	mask_loop(mid,dim,2) < 0.0 .AND. &
	1096	mask_loop(mid,dim,3) == 0.0 ) THEN
	1097	WRITE ( io, 350 ) dir(dim), dir(dim)
	1098	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1099	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1100	mask_loop(mid,dim,1:2)
	1101	ELSE
	1102	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1103	mask_loop(mid,dim,1:3)
	1104	ENDIF
	1105	ENDDO
	1106	ENDIF
	1107
	1108	ENDDO
	1109	ENDDO
	1110
	1111	!
[1]	1112	!-- Timeseries
	1113	IF ( dt_dots /= 9999999.9 ) THEN
	1114	WRITE ( io, 340 )
	1115
	1116	output_format = ''
	1117	IF ( netcdf_output ) THEN
[1031]	1118	output_format = output_format_netcdf
[1]	1119	ENDIF
[292]	1120	WRITE ( io, 344 ) output_format
[1]	1121	WRITE ( io, 341 ) dt_dots
	1122	ENDIF
	1123
	1124	#if defined( __dvrp_graphics )
	1125	!
	1126	!-- Dvrp-output
	1127	IF ( dt_dvrp /= 9999999.9 ) THEN
	1128	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1129	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1130	i = 1
	1131	l = 0
[336]	1132	m = 0
[1]	1133	DO WHILE ( mode_dvrp(i) /= ' ' )
	1134	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1135	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1136	l = l + 1
	1137	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1138	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1139	isosurface_color(:,l)
[1]	1140	ENDIF
	1141	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1142	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1143	m = m + 1
	1144	IF ( do2d(0,j) /= ' ' ) THEN
	1145	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1146	slicer_range_limits_dvrp(:,m)
	1147	ENDIF
[1]	1148	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1149	WRITE ( io, 363 ) dvrp_psize
	1150	IF ( particle_dvrpsize /= 'none' ) THEN
	1151	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1152	dvrpsize_interval
	1153	ENDIF
	1154	IF ( particle_color /= 'none' ) THEN
	1155	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1156	color_interval
	1157	ENDIF
[1]	1158	ENDIF
	1159	i = i + 1
	1160	ENDDO
[237]	1161
[336]	1162	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1163	superelevation_y, superelevation, clip_dvrp_l, &
	1164	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1165
	1166	IF ( TRIM( topography ) /= 'flat' ) THEN
	1167	WRITE ( io, 366 ) topography_color
	1168	IF ( cluster_size > 1 ) THEN
	1169	WRITE ( io, 367 ) cluster_size
	1170	ENDIF
[237]	1171	ENDIF
	1172
[1]	1173	ENDIF
	1174	#endif
	1175
	1176	#if defined( __spectra )
	1177	!
	1178	!-- Spectra output
	1179	IF ( dt_dosp /= 9999999.9 ) THEN
	1180	WRITE ( io, 370 )
	1181
[1031]	1182	output_format = ' '
[1]	1183	IF ( netcdf_output ) THEN
[1031]	1184	output_format = output_format_netcdf
[1]	1185	ENDIF
[292]	1186	WRITE ( io, 344 ) output_format
[1]	1187	WRITE ( io, 371 ) dt_dosp
	1188	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1189	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1190	( spectra_direction(i), i = 1,10 ), &
[189]	1191	( comp_spectra_level(i), i = 1,100 ), &
	1192	( plot_spectra_level(i), i = 1,100 ), &
[1]	1193	averaging_interval_sp, dt_averaging_input_pr
	1194	ENDIF
	1195	#endif
	1196
	1197	WRITE ( io, 99 )
	1198
	1199	!
	1200	!-- Physical quantities
	1201	WRITE ( io, 400 )
	1202
	1203	!
	1204	!-- Geostrophic parameters
	1205	WRITE ( io, 410 ) omega, phi, f, fs
	1206
	1207	!
	1208	!-- Other quantities
	1209	WRITE ( io, 411 ) g
[97]	1210	IF ( use_reference ) THEN
	1211	IF ( ocean ) THEN
	1212	WRITE ( io, 412 ) prho_reference
	1213	ELSE
	1214	WRITE ( io, 413 ) pt_reference
	1215	ENDIF
	1216	ENDIF
[1]	1217
	1218	!
	1219	!-- Cloud physics parameters
	1220	IF ( cloud_physics ) THEN
[57]	1221	WRITE ( io, 415 )
	1222	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1223	ENDIF
	1224
	1225	!-- Profile of the geostrophic wind (component ug)
	1226	!-- Building output strings
	1227	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1228	gradients = '------'
	1229	slices = ' 0'
	1230	coordinates = ' 0.0'
	1231	i = 1
	1232	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1233
[167]	1234	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1235	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1236
[167]	1237	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1238	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1239
[167]	1240	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1241	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1242
[167]	1243	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1244	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1245
[430]	1246	IF ( i == 10 ) THEN
	1247	EXIT
	1248	ELSE
	1249	i = i + 1
	1250	ENDIF
	1251
[1]	1252	ENDDO
	1253
	1254	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1255	TRIM( gradients ), TRIM( slices )
	1256
	1257	!-- Profile of the geostrophic wind (component vg)
	1258	!-- Building output strings
	1259	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1260	gradients = '------'
	1261	slices = ' 0'
	1262	coordinates = ' 0.0'
	1263	i = 1
	1264	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1265
[167]	1266	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1267	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1268
[167]	1269	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1270	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1271
[167]	1272	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1273	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1274
[167]	1275	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1276	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1277
[430]	1278	IF ( i == 10 ) THEN
	1279	EXIT
	1280	ELSE
	1281	i = i + 1
	1282	ENDIF
	1283
[1]	1284	ENDDO
	1285
	1286	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1287	TRIM( gradients ), TRIM( slices )
	1288
	1289	!
[767]	1290	!-- Initial wind profiles
	1291	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1292
	1293	!
[1]	1294	!-- Initial temperature profile
	1295	!-- Building output strings, starting with surface temperature
	1296	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1297	gradients = '------'
	1298	slices = ' 0'
	1299	coordinates = ' 0.0'
	1300	i = 1
	1301	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1302
[94]	1303	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1304	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1305
[94]	1306	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1307	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1308
[94]	1309	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1310	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1311
[94]	1312	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1313	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1314
[430]	1315	IF ( i == 10 ) THEN
	1316	EXIT
	1317	ELSE
	1318	i = i + 1
	1319	ENDIF
	1320
[1]	1321	ENDDO
	1322
	1323	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1324	TRIM( gradients ), TRIM( slices )
	1325
	1326	!
	1327	!-- Initial humidity profile
	1328	!-- Building output strings, starting with surface humidity
[75]	1329	IF ( humidity .OR. passive_scalar ) THEN
[1]	1330	WRITE ( temperatures, '(E8.1)' ) q_surface
	1331	gradients = '--------'
	1332	slices = ' 0'
	1333	coordinates = ' 0.0'
	1334	i = 1
	1335	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1336
	1337	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1338	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1339
	1340	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1341	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1342
	1343	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1344	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1345
	1346	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1347	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1348
[430]	1349	IF ( i == 10 ) THEN
	1350	EXIT
	1351	ELSE
	1352	i = i + 1
	1353	ENDIF
	1354
[1]	1355	ENDDO
	1356
[75]	1357	IF ( humidity ) THEN
[1]	1358	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1359	TRIM( gradients ), TRIM( slices )
	1360	ELSE
	1361	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1362	TRIM( gradients ), TRIM( slices )
	1363	ENDIF
	1364	ENDIF
	1365
	1366	!
[97]	1367	!-- Initial salinity profile
	1368	!-- Building output strings, starting with surface salinity
	1369	IF ( ocean ) THEN
	1370	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1371	gradients = '------'
	1372	slices = ' 0'
	1373	coordinates = ' 0.0'
	1374	i = 1
	1375	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1376
	1377	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1378	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1379
	1380	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1381	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1382
	1383	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1384	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1385
	1386	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1387	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1388
[430]	1389	IF ( i == 10 ) THEN
	1390	EXIT
	1391	ELSE
	1392	i = i + 1
	1393	ENDIF
	1394
[97]	1395	ENDDO
	1396
	1397	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1398	TRIM( gradients ), TRIM( slices )
	1399	ENDIF
	1400
	1401	!
[411]	1402	!-- Profile for the large scale vertial velocity
	1403	!-- Building output strings, starting with surface value
	1404	IF ( large_scale_subsidence ) THEN
	1405	temperatures = ' 0.0'
	1406	gradients = '------'
	1407	slices = ' 0'
	1408	coordinates = ' 0.0'
	1409	i = 1
[580]	1410	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1411
	1412	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1413	w_subs(subs_vertical_gradient_level_i(i))
[411]	1414	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1415
[580]	1416	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1417	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1418
[580]	1419	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1420	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1421
[580]	1422	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1423	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1424
[430]	1425	IF ( i == 10 ) THEN
	1426	EXIT
	1427	ELSE
	1428	i = i + 1
	1429	ENDIF
	1430
[411]	1431	ENDDO
	1432
	1433	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1434	TRIM( gradients ), TRIM( slices )
	1435	ENDIF
	1436
	1437	!
[824]	1438	!-- Cloud physcis parameters / quantities / numerical methods
	1439	WRITE ( io, 430 )
	1440	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1441	WRITE ( io, 431 )
	1442	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1443	WRITE ( io, 432 )
	1444	IF ( radiation ) WRITE ( io, 132 )
	1445	IF ( precipitation ) WRITE ( io, 133 )
	1446	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1447	WRITE ( io, 433 )
	1448	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1449	IF ( collision_kernel /= 'none' ) THEN
	1450	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1451	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1452	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1453	ENDIF
[825]	1454	ELSE
[828]	1455	WRITE ( io, 437 )
[825]	1456	ENDIF
[824]	1457	ENDIF
	1458
	1459	!
[1]	1460	!-- LES / turbulence parameters
	1461	WRITE ( io, 450 )
	1462
	1463	!--
	1464	! ... LES-constants used must still be added here
	1465	!--
	1466	IF ( constant_diffusion ) THEN
	1467	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1468	prandtl_number
	1469	ENDIF
	1470	IF ( .NOT. constant_diffusion) THEN
[108]	1471	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1472	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1473	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1474	ENDIF
	1475
	1476	!
	1477	!-- Special actions during the run
	1478	WRITE ( io, 470 )
	1479	IF ( create_disturbances ) THEN
	1480	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1481	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1482	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1483	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1484	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1485	ELSE
	1486	WRITE ( io, 473 ) disturbance_energy_limit
	1487	ENDIF
	1488	WRITE ( io, 474 ) TRIM( random_generator )
	1489	ENDIF
	1490	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1491	WRITE ( io, 475 ) pt_surface_initial_change
	1492	ENDIF
[75]	1493	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1494	WRITE ( io, 476 ) q_surface_initial_change
	1495	ENDIF
	1496	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1497	WRITE ( io, 477 ) q_surface_initial_change
	1498	ENDIF
	1499
[60]	1500	IF ( particle_advection ) THEN
[1]	1501	!
[60]	1502	!-- Particle attributes
	1503	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1504	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1505	end_time_prel, dt_sort_particles
[60]	1506	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1507	IF ( random_start_position ) WRITE ( io, 481 )
	1508	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1509	WRITE ( io, 495 ) total_number_of_particles
[824]	1510	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1511	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1512	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1513	WRITE ( io, 484 ) total_number_of_tails, &
	1514	minimum_tailpoint_distance, &
	1515	maximum_tailpoint_age
	1516	ENDIF
[1]	1517	ENDIF
[60]	1518	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1519	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1520	output_format = ' '
[60]	1521	IF ( netcdf_output ) THEN
[493]	1522	IF ( netcdf_data_format > 1 ) THEN
[60]	1523	output_format = 'netcdf (64 bit offset) and binary'
	1524	ELSE
	1525	output_format = 'netcdf and binary'
	1526	ENDIF
[1]	1527	ELSE
[60]	1528	output_format = 'binary'
[1]	1529	ENDIF
[292]	1530	WRITE ( io, 344 ) output_format
[1]	1531	ENDIF
[60]	1532	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1533	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1534
[60]	1535	WRITE ( io, 487 ) number_of_particle_groups
[1]	1536
[60]	1537	DO i = 1, number_of_particle_groups
	1538	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1539	WRITE ( io, 490 ) i, 0.0
	1540	WRITE ( io, 492 )
[1]	1541	ELSE
[60]	1542	WRITE ( io, 490 ) i, radius(i)
	1543	IF ( density_ratio(i) /= 0.0 ) THEN
	1544	WRITE ( io, 491 ) density_ratio(i)
	1545	ELSE
	1546	WRITE ( io, 492 )
	1547	ENDIF
[1]	1548	ENDIF
[60]	1549	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1550	pdx(i), pdy(i), pdz(i)
[336]	1551	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1552	ENDDO
[1]	1553
[60]	1554	ENDIF
[1]	1555
[60]	1556
[1]	1557	!
	1558	!-- Parameters of 1D-model
	1559	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1560	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1561	mixing_length_1d, dissipation_1d
	1562	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1563	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1564	ENDIF
	1565	ENDIF
	1566
	1567	!
	1568	!-- User-defined informations
	1569	CALL user_header( io )
	1570
	1571	WRITE ( io, 99 )
	1572
	1573	!
	1574	!-- Write buffer contents to disc immediately
[82]	1575	CALL local_flush( io )
[1]	1576
	1577	!
	1578	!-- Here the FORMATs start
	1579
	1580	99 FORMAT (1X,78('-'))
[200]	1581	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1582	1X,'* ',A,' *',9X,A/ &
	1583	1X,'***************************',9X,42('-'))
[291]	1584	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1585	37X,42('-'))
[200]	1586	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1587	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1588	' Run on host: ',A10)
[1]	1589	#if defined( __parallel )
[200]	1590	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1591	')',1X,A)
[200]	1592	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1593	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1594	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1595	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1596	37X,'because the job is running on an SMP-cluster')
[102]	1597	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1598	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1599	#endif
	1600	110 FORMAT (/' Numerical Schemes:'/ &
	1601	' -----------------'/)
	1602	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1603	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1604	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1605	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1606	' or Upstream')
	1607	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1608	' or Upstream')
	1609	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1610	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1611	' Translation velocity = ',A/ &
	1612	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1613	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1614	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1615	' maximum damping coefficient: ',F5.3, ' 1/s')
	1616	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1617	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1618	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1619	F6.2, ' K assumed')
[824]	1620	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1621	' effective emissivity scheme')
[824]	1622	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1623	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1624	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1625	A,'-cycle)'/ &
	1626	' number of grid levels: ',I2/ &
	1627	' Gauss-Seidel red/black iterations: ',I2)
	1628	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1629	I3,')')
	1630	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1631	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1632	I3,')'/ &
	1633	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1634	I3,')')
	1635	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1636	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1637	140 FORMAT (' maximum residual allowed: ',E10.3)
	1638	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1639	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1640	'step')
[87]	1641	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1642	'kinetic energy')
[927]	1643	144 FORMAT (' masking method is used')
[1]	1644	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1645	'conserved'/ &
	1646	' using the ',A,' mode')
	1647	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1648	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1649	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1650	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1651	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1652	'prognostic equation for')
	1653	154 FORMAT (' the potential temperature')
[1]	1654	200 FORMAT (//' Run time and time step information:'/ &
	1655	' ----------------------------------'/)
	1656	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1657	' CFL-factor: ',F4.2)
	1658	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1659	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1660	' End time: ',F9.3,' s')
	1661	204 FORMAT ( A,F9.3,' s')
	1662	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1663	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1664	' CPU-time used: ',F9.3,' s per timestep: ', &
	1665	' ',F9.3,' s'/ &
	1666	' per second of simulated tim', &
	1667	'e: ',F9.3,' s')
[291]	1668	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1669	250 FORMAT (//' Computational grid and domain size:'/ &
	1670	' ----------------------------------'// &
	1671	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1672	' m dz = ',F7.3,' m'/ &
	1673	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1674	' m z(u) = ',F10.3,' m'/)
	1675	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1676	' factor: ',F5.3/ &
	1677	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1678	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1679	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1680	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1681	' degrees')
	1682	270 FORMAT (//' Topography informations:'/ &
	1683	' -----------------------'// &
	1684	1X,'Topography: ',A)
	1685	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1686	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1687	' / ',I4)
[240]	1688	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1689	' direction' / &
	1690	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1691	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1692	278 FORMAT (' Topography grid definition convention:'/ &
	1693	' cell edge (staggered grid points'/ &
	1694	' (u in x-direction, v in y-direction))' /)
	1695	279 FORMAT (' Topography grid definition convention:'/ &
	1696	' cell center (scalar grid points)' /)
[138]	1697	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1698	' ------------------------------'// &
	1699	' Canopy mode: ', A / &
	1700	' Canopy top: ',I4 / &
	1701	' Leaf drag coefficient: ',F6.2 /)
[153]	1702	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1703	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1704	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1705	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1706	' Height: ',A,' m'/ &
	1707	' Leaf area density: ',A,' m2/m3'/ &
	1708	' Gradient: ',A,' m2/m4'/ &
	1709	' Gridpoint: ',A)
	1710
[1]	1711	300 FORMAT (//' Boundary conditions:'/ &
	1712	' -------------------'// &
	1713	' p uv ', &
	1714	' pt'// &
	1715	' B. bound.: ',A/ &
	1716	' T. bound.: ',A)
[97]	1717	301 FORMAT (/' ',A// &
[1]	1718	' B. bound.: ',A/ &
	1719	' T. bound.: ',A)
[19]	1720	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1721	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1722	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1723	'computational u,v-level:'// &
[978]	1724	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1725	' m kappa = ',F4.2/ &
[1]	1726	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1727	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1728	307 FORMAT (' Heatflux has a random normal distribution')
	1729	308 FORMAT (' Predefined surface temperature')
[97]	1730	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1731	310 FORMAT (//' 1D-Model:'// &
	1732	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1733	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1734	312 FORMAT (' Predefined surface humidity')
	1735	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1736	314 FORMAT (' Predefined scalar value at the surface')
[19]	1737	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1738	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1739	'atmosphere model')
[1]	1740	317 FORMAT (//' Lateral boundaries:'/ &
	1741	' left/right: ',A/ &
	1742	' north/south: ',A)
[978]	1743	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1744	'damping factor = ',F6.4)
[151]	1745	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1746	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1747	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1748	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1749	' v: ',F9.6,' m2/s2')
[151]	1750	325 FORMAT (//' List output:'/ &
[1]	1751	' -----------'// &
	1752	' 1D-Profiles:'/ &
	1753	' Output every ',F8.2,' s')
[151]	1754	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1755	' Averaging input every ',F8.2,' s')
	1756	330 FORMAT (//' Data output:'/ &
	1757	' -----------'/)
	1758	331 FORMAT (/' 1D-Profiles:')
	1759	332 FORMAT (/' ',A)
	1760	333 FORMAT (' Output every ',F8.2,' s',/ &
	1761	' Time averaged over ',F8.2,' s'/ &
	1762	' Averaging input every ',F8.2,' s')
	1763	334 FORMAT (/' 2D-Arrays',A,':')
	1764	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1765	' Output every ',F8.2,' s ',A/ &
	1766	' Cross sections at ',A1,' = ',A/ &
	1767	' scalar-coordinates: ',A,' m'/)
	1768	336 FORMAT (/' 3D-Arrays',A,':')
	1769	337 FORMAT (/' Arrays: ',A/ &
	1770	' Output every ',F8.2,' s ',A/ &
	1771	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1772	338 FORMAT (' Compressed data output'/ &
	1773	' Decimal precision: ',A/)
	1774	339 FORMAT (' No output during initial ',F8.2,' s')
	1775	340 FORMAT (/' Time series:')
	1776	341 FORMAT (' Output every ',F8.2,' s'/)
	1777	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1778	' Output every ',F8.2,' s ',A/ &
	1779	' Time averaged over ',F8.2,' s'/ &
	1780	' Averaging input every ',F8.2,' s'/ &
	1781	' Cross sections at ',A1,' = ',A/ &
	1782	' scalar-coordinates: ',A,' m'/)
	1783	343 FORMAT (/' Arrays: ',A/ &
	1784	' Output every ',F8.2,' s ',A/ &
	1785	' Time averaged over ',F8.2,' s'/ &
	1786	' Averaging input every ',F8.2,' s'/ &
	1787	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1788	344 FORMAT (' Output format: ',A/)
[410]	1789	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1790	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1791	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1792	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1793	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1794	347 FORMAT (' Variables: ',A/ &
	1795	' Output every ',F8.2,' s')
	1796	348 FORMAT (' Variables: ',A/ &
	1797	' Output every ',F8.2,' s'/ &
	1798	' Time averaged over ',F8.2,' s'/ &
	1799	' Averaging input every ',F8.2,' s')
	1800	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1801	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1802	13(' ',8(F8.2,',')/) )
	1803	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1804	'all gridpoints along ',A,'-direction (default).' )
	1805	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1806	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1807	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1808	#if defined( __dvrp_graphics )
	1809	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1810	' Output every ',F7.1,' s'/ &
	1811	' Output mode: ',A/ &
	1812	' Host / User: ',A,' / ',A/ &
	1813	' Directory: ',A// &
	1814	' The sequence contains:')
[337]	1815	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1816	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1817	362 FORMAT (/' Slicer plane ',A/ &
[336]	1818	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1819	363 FORMAT (/' Particles'/ &
[336]	1820	' particle size: ',F7.2,' m')
	1821	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1822	F6.2,',',F6.2,']')
[337]	1823	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1824	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1825	')'/ &
	1826	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1827	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1828	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1829	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1830	#endif
	1831	#if defined( __spectra )
	1832	370 FORMAT (' Spectra:')
	1833	371 FORMAT (' Output every ',F7.1,' s'/)
	1834	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1835	' Directions: ', 10(A5,',')/ &
[189]	1836	' height levels k = ', 20(I3,',')/ &
	1837	' ', 20(I3,',')/ &
	1838	' ', 20(I3,',')/ &
	1839	' ', 20(I3,',')/ &
	1840	' ', 19(I3,','),I3,'.'/ &
[1]	1841	' height levels selected for standard plot:'/ &
[189]	1842	' k = ', 20(I3,',')/ &
	1843	' ', 20(I3,',')/ &
	1844	' ', 20(I3,',')/ &
	1845	' ', 20(I3,',')/ &
	1846	' ', 19(I3,','),I3,'.'/ &
[1]	1847	' Time averaged over ', F7.1, ' s,' / &
	1848	' Profiles for the time averaging are taken every ', &
	1849	F6.1,' s')
	1850	#endif
	1851	400 FORMAT (//' Physical quantities:'/ &
	1852	' -------------------'/)
	1853	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1854	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1855	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1856	' f* = ',F9.6,' 1/s')
	1857	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1858	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1859	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1860	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1861	' ------------------------'/)
[57]	1862	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1863	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1864	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1865	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1866	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1867	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1868	' Height: ',A,' m'/ &
	1869	' Temperature: ',A,' K'/ &
	1870	' Gradient: ',A,' K/100m'/ &
	1871	' Gridpoint: ',A)
	1872	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1873	' Height: ',A,' m'/ &
	1874	' Humidity: ',A,' kg/kg'/ &
	1875	' Gradient: ',A,' (kg/kg)/100m'/ &
	1876	' Gridpoint: ',A)
	1877	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1878	' Height: ',A,' m'/ &
	1879	' Scalar concentration: ',A,' kg/m**3'/ &
	1880	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1881	' Gridpoint: ',A)
	1882	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1883	' Height: ',A,' m'/ &
	1884	' ug: ',A,' m/s'/ &
	1885	' Gradient: ',A,' 1/100s'/ &
	1886	' Gridpoint: ',A)
	1887	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1888	' Height: ',A,' m'/ &
[97]	1889	' vg: ',A,' m/s'/ &
[1]	1890	' Gradient: ',A,' 1/100s'/ &
	1891	' Gridpoint: ',A)
[97]	1892	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1893	' Height: ',A,' m'/ &
	1894	' Salinity: ',A,' psu'/ &
	1895	' Gradient: ',A,' psu/100m'/ &
	1896	' Gridpoint: ',A)
[411]	1897	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1898	' Height: ',A,' m'/ &
	1899	' w_subs: ',A,' m/s'/ &
	1900	' Gradient: ',A,' (m/s)/100m'/ &
	1901	' Gridpoint: ',A)
[767]	1902	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1903	' profiles')
[824]	1904	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1905	' ----------------------------------'/)
	1906	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1907	'on)')
	1908	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1909	' total water content is used.'/ &
	1910	' Condensation is parameterized via 0% - or 100% scheme.')
	1911	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1912	'icle model')
	1913	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1914	' droplets < 1.0E-6 m')
[825]	1915	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1916	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1917	'are used'/ &
	1918	' number of radius classes: ',I3,' interval ', &
	1919	'[1.0E-6,2.0E-4] m'/ &
	1920	' number of dissipation classes: ',I2,' interval ', &
	1921	'[0,1000] cm2/s3')
	1922	437 FORMAT (' Droplet collision is switched off')
[1]	1923	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1924	' ---------------------------'/)
[824]	1925	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1926	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1927	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1928	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1929	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1930	470 FORMAT (//' Actions during the simulation:'/ &
	1931	' -----------------------------'/)
[94]	1932	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1933	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1934	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1935	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1936	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1937	' to i/j =',I4)
	1938	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1939	1X,F5.3, ' m2/s2')
	1940	474 FORMAT (' Random number generator used : ',A/)
	1941	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1942	'respectively, if'/ &
	1943	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1944	' 3D-simulation'/)
	1945	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1946	'respectively, if the'/ &
	1947	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1948	' the 3D-simulation'/)
	1949	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1950	'respectively, if the'/ &
	1951	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1952	' the 3D-simulation'/)
	1953	480 FORMAT (' Particles:'/ &
	1954	' ---------'// &
	1955	' Particle advection is active (switched on at t = ', F7.1, &
	1956	' s)'/ &
	1957	' Start of new particle generations every ',F6.1,' s'/ &
	1958	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1959	' bottom: ', A, ' top: ', A/&
	1960	' Maximum particle age: ',F9.1,' s'/ &
[117]	1961	' Advection stopped at t = ',F9.1,' s'/ &
	1962	' Particles are sorted every ',F9.1,' s'/)
[1]	1963	481 FORMAT (' Particles have random start positions'/)
[336]	1964	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1965	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1966	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1967	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1968	' Maximum age of the end of the tail: ',F8.2,' s')
	1969	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1970	486 FORMAT (' Particle statistics are written on file'/)
	1971	487 FORMAT (' Number of particle groups: ',I2/)
	1972	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1973	' minimum timestep for advection: ', F7.5/)
	1974	489 FORMAT (' Number of particles simultaneously released at each ', &
	1975	'point: ', I5/)
	1976	490 FORMAT (' Particle group ',I2,':'/ &
	1977	' Particle radius: ',E10.3, 'm')
	1978	491 FORMAT (' Particle inertia is activated'/ &
	1979	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1980	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1981	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1982	' y:',F8.1,' - ',F8.1,' m'/&
	1983	' z:',F8.1,' - ',F8.1,' m'/&
	1984	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1985	' m dz = ',F8.1,' m'/)
	1986	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1987	F8.2,' s'/)
	1988	495 FORMAT (' Number of particles in total domain: ',I10/)
	1989	500 FORMAT (//' 1D-Model parameters:'/ &
	1990	' -------------------'// &
	1991	' Simulation time: ',F8.1,' s'/ &
	1992	' Run-controll output every: ',F8.1,' s'/ &
	1993	' Vertical profile output every: ',F8.1,' s'/ &
	1994	' Mixing length calculation: ',A/ &
	1995	' Dissipation calculation: ',A/)
	1996	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1997	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1998	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1999
	2000
	2001	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |