Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1036

Last change on this file since 1036 was 1036, checked in by raasch, 12 years ago
code has been put under the GNU General Public License (v3)
Property svn:keywords set to `Id`
File size: 76.3 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[941]	22	!
[1035]	23	!
[392]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 1036 2012-10-22 13:43:42Z raasch $
	27	!
[1035]	28	! 1031 2012-10-19 14:35:30Z raasch
	29	! output of netCDF data format modified
	30	!
[1017]	31	! 1015 2012-09-27 09:23:24Z raasch
	32	! output of Aajustment of mixing length to the Prandtl mixing length at first
	33	! grid point above ground removed
	34	!
[1004]	35	! 1003 2012-09-14 14:35:53Z raasch
	36	! output of information about equal/unequal subdomain size removed
	37	!
[1002]	38	! 1001 2012-09-13 14:08:46Z raasch
	39	! all actions concerning leapfrog- and upstream-spline-scheme removed
	40	!
[979]	41	! 978 2012-08-09 08:28:32Z fricke
	42	! -km_damp_max, outflow_damping_width
	43	! +pt_damping_factor, pt_damping_width
	44	! +z0h
	45	!
[965]	46	! 964 2012-07-26 09:14:24Z raasch
	47	! output of profil-related quantities removed
	48	!
[941]	49	! 940 2012-07-09 14:31:00Z raasch
	50	! Output in case of simulations for pure neutral stratification (no pt-equation
	51	! solved)
	52	!
[928]	53	! 927 2012-06-06 19:15:04Z raasch
	54	! output of masking_method for mg-solver
	55	!
[869]	56	! 868 2012-03-28 12:21:07Z raasch
	57	! translation velocity in Galilean transformation changed to 0.6 * ug
	58	!
[834]	59	! 833 2012-02-22 08:55:55Z maronga
	60	! Adjusted format for leaf area density
	61	!
[829]	62	! 828 2012-02-21 12:00:36Z raasch
	63	! output of dissipation_classes + radius_classes
	64	!
[826]	65	! 825 2012-02-19 03:03:44Z raasch
	66	! Output of cloud physics parameters/quantities complemented and restructured
	67	!
[768]	68	! 767 2011-10-14 06:39:12Z raasch
	69	! Output of given initial u,v-profiles
	70	!
[760]	71	! 759 2011-09-15 13:58:31Z raasch
	72	! output of maximum number of parallel io streams
	73	!
[708]	74	! 707 2011-03-29 11:39:40Z raasch
	75	! bc_lr/ns replaced by bc_lr/ns_cyc
	76	!
[668]	77	! 667 2010-12-23 12:06:00Z suehring/gryschka
	78	! Output of advection scheme.
	79	! Modified output of Prandtl-layer height.
	80	!
[581]	81	! 580 2010-10-05 13:59:11Z heinze
	82	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	83	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	84	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	85	!
[494]	86	! 493 2010-03-01 08:30:24Z raasch
	87	! NetCDF data output format extendend for NetCDF4/HDF5
	88	!
[482]	89	! 449 2010-02-02 11:23:59Z raasch
	90	! +large scale vertical motion (subsidence/ascent)
	91	! Bugfix: index problem concerning gradient_level indices removed
	92	!
[449]	93	! 410 2009-12-04 17:05:40Z letzel
	94	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	95	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	96	!
[392]	97	! 346 2009-07-06 10:13:41Z raasch
[328]	98	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	99	! Coupling with independent precursor runs.
[254]	100	! Output of messages replaced by message handling routine.
[336]	101	! Output of several additional dvr parameters
[240]	102	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	103	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	104	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	105	! topography_grid_convention moved from user_header
[292]	106	! small bugfix concerning 3d 64bit netcdf output format
[1]	107	!
[226]	108	! 206 2008-10-13 14:59:11Z raasch
	109	! Bugfix: error in zu index in case of section_xy = -1
	110	!
[200]	111	! 198 2008-09-17 08:55:28Z raasch
	112	! Format adjustments allowing output of larger revision numbers
	113	!
[198]	114	! 197 2008-09-16 15:29:03Z raasch
	115	! allow 100 spectra levels instead of 10 for consistency with
	116	! define_netcdf_header,
	117	! bugfix in the output of the characteristic levels of potential temperature,
	118	! geostrophic wind, scalar concentration, humidity and leaf area density,
	119	! output of turbulence recycling informations
	120	!
[139]	121	! 138 2007-11-28 10:03:58Z letzel
	122	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	123	! Allow two instead of one digit to specify isosurface and slicer variables.
	124	! Output of sorting frequency of particles
	125	!
[110]	126	! 108 2007-08-24 15:10:38Z letzel
	127	! Output of informations for coupled model runs (boundary conditions etc.)
	128	! + output of momentumfluxes at the top boundary
	129	! Rayleigh damping for ocean, e_init
	130	!
[98]	131	! 97 2007-06-21 08:23:15Z raasch
	132	! Adjustments for the ocean version.
	133	! use_pt_reference renamed use_reference
	134	!
[90]	135	! 87 2007-05-22 15:46:47Z raasch
	136	! Bugfix: output of use_upstream_for_tke
	137	!
[83]	138	! 82 2007-04-16 15:40:52Z raasch
	139	! Preprocessor strings for different linux clusters changed to "lc",
	140	! routine local_flush is used for buffer flushing
	141	!
[77]	142	! 76 2007-03-29 00:58:32Z raasch
	143	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	144	! output of the loop optimization method, moisture renamed humidity,
	145	! output of subversion revision number
	146	!
[39]	147	! 19 2007-02-23 04:53:48Z raasch
	148	! Output of scalar flux applied at top boundary
	149	!
[3]	150	! RCS Log replace by Id keyword, revision history cleaned up
	151	!
[1]	152	! Revision 1.63 2006/08/22 13:53:13 raasch
	153	! Output of dz_max
	154	!
	155	! Revision 1.1 1997/08/11 06:17:20 raasch
	156	! Initial revision
	157	!
	158	!
	159	! Description:
	160	! ------------
	161	! Writing a header with all important informations about the actual run.
	162	! This subroutine is called three times, two times at the beginning
	163	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	164	! end of the run, then writing additional information about CPU-usage on file
	165	! header.
[411]	166	!-----------------------------------------------------------------------------!
[1]	167
	168	USE arrays_3d
	169	USE control_parameters
	170	USE cloud_parameters
	171	USE cpulog
	172	USE dvrp_variables
	173	USE grid_variables
	174	USE indices
	175	USE model_1d
	176	USE particle_attributes
	177	USE pegrid
[411]	178	USE subsidence_mod
[1]	179	USE spectrum
	180
	181	IMPLICIT NONE
	182
	183	CHARACTER (LEN=1) :: prec
	184	CHARACTER (LEN=2) :: do2d_mode
	185	CHARACTER (LEN=5) :: section_chr
	186	CHARACTER (LEN=9) :: time_to_string
	187	CHARACTER (LEN=10) :: coor_chr, host_chr
	188	CHARACTER (LEN=16) :: begin_chr
[200]	189	CHARACTER (LEN=23) :: ver_rev
[1]	190	CHARACTER (LEN=40) :: output_format
[167]	191	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	192	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	193	domask_chr, run_classification
[167]	194	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	195	temperatures, ugcomponent, vgcomponent
[1]	196	CHARACTER (LEN=85) :: roben, runten
	197
[410]	198	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	199
	200	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	201	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	202	REAL :: cpuseconds_per_simulated_second
	203
	204	!
	205	!-- Open the output file. At the end of the simulation, output is directed
	206	!-- to unit 19.
	207	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	208	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	209	io = 15 ! header output on file RUN_CONTROL
	210	ELSE
	211	io = 19 ! header output on file HEADER
	212	ENDIF
	213	CALL check_open( io )
	214
	215	!
	216	!-- At the end of the run, output file (HEADER) will be rewritten with
	217	!-- new informations
	218	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	219
	220	!
	221	!-- Determine kind of model run
	222	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	223	run_classification = '3D - restart run'
[328]	224	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	225	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	226	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	227	run_classification = '3D - run without 1D - prerun'
[197]	228	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	229	run_classification = '3D - run with 1D - prerun'
[197]	230	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	231	run_classification = '3D - run initialized by user'
[1]	232	ELSE
[254]	233	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	234	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	235	ENDIF
[97]	236	IF ( ocean ) THEN
	237	run_classification = 'ocean - ' // run_classification
	238	ELSE
	239	run_classification = 'atmosphere - ' // run_classification
	240	ENDIF
[1]	241
	242	!
	243	!-- Run-identification, date, time, host
	244	host_chr = host(1:10)
[75]	245	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	246	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	247	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	248	#if defined( __mpi2 )
	249	mpi_type = 2
	250	#else
	251	mpi_type = 1
	252	#endif
	253	WRITE ( io, 101 ) mpi_type, coupling_mode
	254	ENDIF
[102]	255	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	256	ADJUSTR( host_chr )
[1]	257	#if defined( __parallel )
	258	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	259	char1 = 'calculated'
	260	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	261	host(1:2) == 'lc' ) .AND. &
	262	npex == -1 .AND. pdims(2) == 1 ) THEN
	263	char1 = 'forced'
	264	ELSE
	265	char1 = 'predefined'
	266	ENDIF
	267	IF ( threads_per_task == 1 ) THEN
[102]	268	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	269	ELSE
[102]	270	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	271	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	272	ENDIF
	273	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	274	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	275	npex == -1 .AND. pdims(2) == 1 ) &
	276	THEN
[102]	277	WRITE ( io, 106 )
[1]	278	ELSEIF ( pdims(2) == 1 ) THEN
[102]	279	WRITE ( io, 107 ) 'x'
[1]	280	ELSEIF ( pdims(1) == 1 ) THEN
[102]	281	WRITE ( io, 107 ) 'y'
[1]	282	ENDIF
[102]	283	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	284	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	285	WRITE ( io, 108 ) maximum_parallel_io_streams
	286	ENDIF
[1]	287	#endif
	288	WRITE ( io, 99 )
	289
	290	!
	291	!-- Numerical schemes
	292	WRITE ( io, 110 )
	293	IF ( psolver(1:7) == 'poisfft' ) THEN
	294	WRITE ( io, 111 ) TRIM( fft_method )
	295	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	296	ELSEIF ( psolver == 'sor' ) THEN
	297	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	298	ELSEIF ( psolver == 'multigrid' ) THEN
	299	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	300	IF ( mg_cycles == -1 ) THEN
	301	WRITE ( io, 140 ) residual_limit
	302	ELSE
	303	WRITE ( io, 141 ) mg_cycles
	304	ENDIF
	305	IF ( mg_switch_to_pe0_level == 0 ) THEN
	306	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	307	nzt_mg(1)
[197]	308	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	309	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	310	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	311	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	312	nzt_mg(mg_switch_to_pe0_level), &
	313	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	314	nzt_mg(1)
	315	ENDIF
[927]	316	IF ( masking_method ) WRITE ( io, 144 )
[1]	317	ENDIF
	318	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	319	THEN
	320	WRITE ( io, 142 )
	321	ENDIF
	322
	323	IF ( momentum_advec == 'pw-scheme' ) THEN
	324	WRITE ( io, 113 )
[667]	325	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	326	WRITE ( io, 503 )
[1]	327	ENDIF
	328	IF ( scalar_advec == 'pw-scheme' ) THEN
	329	WRITE ( io, 116 )
[667]	330	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	331	WRITE ( io, 504 )
[1]	332	ELSE
	333	WRITE ( io, 118 )
	334	ENDIF
[63]	335
	336	WRITE ( io, 139 ) TRIM( loop_optimization )
	337
[1]	338	IF ( galilei_transformation ) THEN
	339	IF ( use_ug_for_galilei_tr ) THEN
[868]	340	char1 = '0.6 * geostrophic wind'
[1]	341	ELSE
	342	char1 = 'mean wind in model domain'
	343	ENDIF
	344	IF ( simulated_time_at_begin == simulated_time ) THEN
	345	char2 = 'at the start of the run'
	346	ELSE
	347	char2 = 'at the end of the run'
	348	ENDIF
	349	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	350	advected_distance_x/1000.0, advected_distance_y/1000.0
	351	ENDIF
[1001]	352	WRITE ( io, 122 ) timestep_scheme
[87]	353	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	354	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	355	IF ( .NOT. ocean ) THEN
	356	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	357	rayleigh_damping_factor
	358	ELSE
	359	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	360	rayleigh_damping_factor
	361	ENDIF
[1]	362	ENDIF
[940]	363	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	364	IF ( humidity ) THEN
[1]	365	IF ( .NOT. cloud_physics ) THEN
	366	WRITE ( io, 129 )
	367	ELSE
	368	WRITE ( io, 130 )
	369	ENDIF
	370	ENDIF
	371	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	372	IF ( conserve_volume_flow ) THEN
[241]	373	WRITE ( io, 150 ) conserve_volume_flow_mode
	374	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	375	WRITE ( io, 151 ) u_bulk, v_bulk
	376	ENDIF
[240]	377	ELSEIF ( dp_external ) THEN
	378	IF ( dp_smooth ) THEN
[241]	379	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	380	ELSE
[241]	381	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	382	ENDIF
	383	ENDIF
[411]	384	IF ( large_scale_subsidence ) THEN
	385	WRITE ( io, 153 )
	386	WRITE ( io, 154 )
	387	ENDIF
[1]	388	WRITE ( io, 99 )
	389
	390	!
	391	!-- Runtime and timestep informations
	392	WRITE ( io, 200 )
	393	IF ( .NOT. dt_fixed ) THEN
	394	WRITE ( io, 201 ) dt_max, cfl_factor
	395	ELSE
	396	WRITE ( io, 202 ) dt
	397	ENDIF
	398	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	399
	400	IF ( time_restart /= 9999999.9 .AND. &
	401	simulated_time_at_begin == simulated_time ) THEN
	402	IF ( dt_restart == 9999999.9 ) THEN
	403	WRITE ( io, 204 ) ' Restart at: ',time_restart
	404	ELSE
	405	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	406	ENDIF
	407	ENDIF
	408
	409	IF ( simulated_time_at_begin /= simulated_time ) THEN
	410	i = MAX ( log_point_s(10)%counts, 1 )
	411	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	412	cpuseconds_per_simulated_second = 0.0
	413	ELSE
	414	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	415	( simulated_time - &
	416	simulated_time_at_begin )
	417	ENDIF
	418	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	419	log_point_s(10)%sum / REAL( i ), &
	420	cpuseconds_per_simulated_second
	421	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	422	IF ( dt_restart == 9999999.9 ) THEN
	423	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	424	ELSE
	425	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	426	ENDIF
	427	ENDIF
	428	ENDIF
	429
	430	!
[291]	431	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	432	!-- and ocean are used. In this case, coupling_start_time defines the time
	433	!-- when the coupling is switched on.
	434	IF ( coupling_start_time /= 0.0 ) THEN
	435	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	436	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	437	ELSE
	438	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	439	'precursor runs'
	440	ENDIF
	441	WRITE ( io, 207 ) char1, coupling_start_time
	442	ENDIF
	443
	444	!
[1]	445	!-- Computational grid
[94]	446	IF ( .NOT. ocean ) THEN
	447	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	448	IF ( dz_stretch_level_index < nzt+1 ) THEN
	449	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	450	dz_stretch_factor, dz_max
	451	ENDIF
	452	ELSE
	453	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	454	IF ( dz_stretch_level_index > 0 ) THEN
	455	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	456	dz_stretch_factor, dz_max
	457	ENDIF
[1]	458	ENDIF
	459	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	460	MIN( nnz+2, nzt+2 )
	461	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	462
	463	!
	464	!-- Topography
	465	WRITE ( io, 270 ) topography
	466	SELECT CASE ( TRIM( topography ) )
	467
	468	CASE ( 'flat' )
	469	! no actions necessary
	470
	471	CASE ( 'single_building' )
	472	blx = INT( building_length_x / dx )
	473	bly = INT( building_length_y / dy )
	474	bh = INT( building_height / dz )
	475
	476	IF ( building_wall_left == 9999999.9 ) THEN
	477	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	478	ENDIF
	479	bxl = INT ( building_wall_left / dx + 0.5 )
	480	bxr = bxl + blx
	481
	482	IF ( building_wall_south == 9999999.9 ) THEN
	483	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	484	ENDIF
	485	bys = INT ( building_wall_south / dy + 0.5 )
	486	byn = bys + bly
	487
	488	WRITE ( io, 271 ) building_length_x, building_length_y, &
	489	building_height, bxl, bxr, bys, byn
	490
[240]	491	CASE ( 'single_street_canyon' )
	492	ch = NINT( canyon_height / dz )
	493	IF ( canyon_width_x /= 9999999.9 ) THEN
	494	!
	495	!-- Street canyon in y direction
	496	cwx = NINT( canyon_width_x / dx )
	497	IF ( canyon_wall_left == 9999999.9 ) THEN
	498	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	499	ENDIF
	500	cxl = NINT( canyon_wall_left / dx )
	501	cxr = cxl + cwx
	502	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	503
	504	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	505	!
	506	!-- Street canyon in x direction
	507	cwy = NINT( canyon_width_y / dy )
	508	IF ( canyon_wall_south == 9999999.9 ) THEN
	509	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	510	ENDIF
	511	cys = NINT( canyon_wall_south / dy )
	512	cyn = cys + cwy
	513	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	514	ENDIF
	515
[1]	516	END SELECT
	517
[256]	518	IF ( TRIM( topography ) /= 'flat' ) THEN
	519	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	520	IF ( TRIM( topography ) == 'single_building' .OR. &
	521	TRIM( topography ) == 'single_street_canyon' ) THEN
	522	WRITE ( io, 278 )
	523	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	524	WRITE ( io, 279 )
	525	ENDIF
	526	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	527	WRITE ( io, 278 )
	528	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	529	WRITE ( io, 279 )
	530	ENDIF
	531	ENDIF
	532
[138]	533	IF ( plant_canopy ) THEN
	534
	535	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	536	IF ( passive_scalar ) THEN
	537	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	538	leaf_surface_concentration
	539	ENDIF
[138]	540
[1]	541	!
[153]	542	!-- Heat flux at the top of vegetation
	543	WRITE ( io, 282 ) cthf
	544
	545	!
[138]	546	!-- Leaf area density profile
	547	!-- Building output strings, starting with surface value
[833]	548	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	549	gradients = '------'
	550	slices = ' 0'
	551	coordinates = ' 0.0'
	552	i = 1
	553	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	554
	555	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	556	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	557
	558	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	559	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	560
	561	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	562	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	563
	564	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	565	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	566
	567	i = i + 1
	568	ENDDO
	569
[153]	570	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	571	TRIM( gradients ), TRIM( slices )
	572
	573	ENDIF
	574
	575	!
[1]	576	!-- Boundary conditions
	577	IF ( ibc_p_b == 0 ) THEN
	578	runten = 'p(0) = 0 \|'
	579	ELSEIF ( ibc_p_b == 1 ) THEN
	580	runten = 'p(0) = p(1) \|'
	581	ELSE
	582	runten = 'p(0) = p(1) +R\|'
	583	ENDIF
	584	IF ( ibc_p_t == 0 ) THEN
	585	roben = 'p(nzt+1) = 0 \|'
	586	ELSE
	587	roben = 'p(nzt+1) = p(nzt) \|'
	588	ENDIF
	589
	590	IF ( ibc_uv_b == 0 ) THEN
	591	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	592	ELSE
	593	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	594	ENDIF
[132]	595	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	596	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	597	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	598	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	599	ELSE
	600	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	601	ENDIF
	602
	603	IF ( ibc_pt_b == 0 ) THEN
	604	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	605	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	606	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	607	ELSEIF ( ibc_pt_b == 2 ) THEN
	608	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	609	ENDIF
	610	IF ( ibc_pt_t == 0 ) THEN
[19]	611	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	612	ELSEIF( ibc_pt_t == 1 ) THEN
	613	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	614	ELSEIF( ibc_pt_t == 2 ) THEN
	615	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	616
[1]	617	ENDIF
	618
	619	WRITE ( io, 300 ) runten, roben
	620
	621	IF ( .NOT. constant_diffusion ) THEN
	622	IF ( ibc_e_b == 1 ) THEN
	623	runten = 'e(0) = e(1)'
	624	ELSE
	625	runten = 'e(0) = e(1) = (u/0.1)*2'
	626	ENDIF
	627	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	628
[97]	629	WRITE ( io, 301 ) 'e', runten, roben
[1]	630
	631	ENDIF
	632
[97]	633	IF ( ocean ) THEN
	634	runten = 'sa(0) = sa(1)'
	635	IF ( ibc_sa_t == 0 ) THEN
	636	roben = 'sa(nzt+1) = sa_surface'
[1]	637	ELSE
[97]	638	roben = 'sa(nzt+1) = sa(nzt)'
[1]	639	ENDIF
[97]	640	WRITE ( io, 301 ) 'sa', runten, roben
	641	ENDIF
[1]	642
[97]	643	IF ( humidity ) THEN
	644	IF ( ibc_q_b == 0 ) THEN
	645	runten = 'q(0) = q_surface'
	646	ELSE
	647	runten = 'q(0) = q(1)'
	648	ENDIF
	649	IF ( ibc_q_t == 0 ) THEN
	650	roben = 'q(nzt) = q_top'
	651	ELSE
	652	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	653	ENDIF
	654	WRITE ( io, 301 ) 'q', runten, roben
	655	ENDIF
[1]	656
[97]	657	IF ( passive_scalar ) THEN
	658	IF ( ibc_q_b == 0 ) THEN
	659	runten = 's(0) = s_surface'
	660	ELSE
	661	runten = 's(0) = s(1)'
	662	ENDIF
	663	IF ( ibc_q_t == 0 ) THEN
	664	roben = 's(nzt) = s_top'
	665	ELSE
	666	roben = 's(nzt) = s(nzt-1) + ds/dz'
	667	ENDIF
	668	WRITE ( io, 301 ) 's', runten, roben
[1]	669	ENDIF
	670
	671	IF ( use_surface_fluxes ) THEN
	672	WRITE ( io, 303 )
	673	IF ( constant_heatflux ) THEN
	674	WRITE ( io, 306 ) surface_heatflux
	675	IF ( random_heatflux ) WRITE ( io, 307 )
	676	ENDIF
[75]	677	IF ( humidity .AND. constant_waterflux ) THEN
[1]	678	WRITE ( io, 311 ) surface_waterflux
	679	ENDIF
	680	IF ( passive_scalar .AND. constant_waterflux ) THEN
	681	WRITE ( io, 313 ) surface_waterflux
	682	ENDIF
	683	ENDIF
	684
[19]	685	IF ( use_top_fluxes ) THEN
	686	WRITE ( io, 304 )
[102]	687	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	688	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	689	IF ( constant_top_heatflux ) THEN
	690	WRITE ( io, 306 ) top_heatflux
	691	ENDIF
	692	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	693	WRITE ( io, 316 )
[19]	694	ENDIF
[97]	695	IF ( ocean .AND. constant_top_salinityflux ) THEN
	696	WRITE ( io, 309 ) top_salinityflux
	697	ENDIF
[75]	698	IF ( humidity .OR. passive_scalar ) THEN
[19]	699	WRITE ( io, 315 )
	700	ENDIF
	701	ENDIF
	702
[1]	703	IF ( prandtl_layer ) THEN
[978]	704	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	705	z0h_factor*roughness_length, kappa, &
[94]	706	rif_min, rif_max
[1]	707	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	708	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	709	WRITE ( io, 312 )
	710	ENDIF
	711	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	712	WRITE ( io, 314 )
	713	ENDIF
	714	ELSE
	715	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	716	WRITE ( io, 310 ) rif_min, rif_max
	717	ENDIF
	718	ENDIF
	719
	720	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	721	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	722	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	723	IF ( turbulent_inflow ) THEN
	724	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	725	inflow_damping_height, inflow_damping_width
	726	ENDIF
[1]	727	ENDIF
	728
	729	!
	730	!-- Listing of 1D-profiles
[151]	731	WRITE ( io, 325 ) dt_dopr_listing
[1]	732	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	733	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	734	ENDIF
	735
	736	!
	737	!-- DATA output
	738	WRITE ( io, 330 )
	739	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	740	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	741	ENDIF
	742
	743	!
	744	!-- 1D-profiles
[346]	745	dopr_chr = 'Profile:'
[1]	746	IF ( dopr_n /= 0 ) THEN
	747	WRITE ( io, 331 )
	748
	749	output_format = ''
	750	IF ( netcdf_output ) THEN
[1031]	751	output_format = output_format_netcdf
[1]	752	ENDIF
[292]	753	WRITE ( io, 344 ) output_format
[1]	754
	755	DO i = 1, dopr_n
	756	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	757	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	758	WRITE ( io, 332 ) dopr_chr
	759	dopr_chr = ' :'
	760	ENDIF
	761	ENDDO
	762
	763	IF ( dopr_chr /= '' ) THEN
	764	WRITE ( io, 332 ) dopr_chr
	765	ENDIF
	766	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	767	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	768	ENDIF
	769
	770	!
	771	!-- 2D-arrays
	772	DO av = 0, 1
	773
	774	i = 1
	775	do2d_xy = ''
	776	do2d_xz = ''
	777	do2d_yz = ''
	778	DO WHILE ( do2d(av,i) /= ' ' )
	779
	780	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	781	do2d_mode = do2d(av,i)(l-1:l)
	782
	783	SELECT CASE ( do2d_mode )
	784	CASE ( 'xy' )
	785	ll = LEN_TRIM( do2d_xy )
	786	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	787	CASE ( 'xz' )
	788	ll = LEN_TRIM( do2d_xz )
	789	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	790	CASE ( 'yz' )
	791	ll = LEN_TRIM( do2d_yz )
	792	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	793	END SELECT
	794
	795	i = i + 1
	796
	797	ENDDO
	798
	799	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	800	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	801	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	802	( netcdf_output .OR. iso2d_output ) ) THEN
	803
	804	IF ( av == 0 ) THEN
	805	WRITE ( io, 334 ) ''
	806	ELSE
	807	WRITE ( io, 334 ) '(time-averaged)'
	808	ENDIF
	809
	810	IF ( do2d_at_begin ) THEN
	811	begin_chr = 'and at the start'
	812	ELSE
	813	begin_chr = ''
	814	ENDIF
	815
	816	output_format = ''
	817	IF ( netcdf_output ) THEN
[1031]	818	output_format = output_format_netcdf
[1]	819	ENDIF
	820	IF ( iso2d_output ) THEN
	821	IF ( netcdf_output ) THEN
[1031]	822	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	823	ELSE
	824	output_format = 'iso2d'
	825	ENDIF
	826	ENDIF
[292]	827	WRITE ( io, 344 ) output_format
[1]	828
	829	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	830	i = 1
	831	slices = '/'
	832	coordinates = '/'
	833	!
	834	!-- Building strings with index and coordinate informations of the
	835	!-- slices
	836	DO WHILE ( section(i,1) /= -9999 )
	837
	838	WRITE (section_chr,'(I5)') section(i,1)
	839	section_chr = ADJUSTL( section_chr )
	840	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	841
[206]	842	IF ( section(i,1) == -1 ) THEN
	843	WRITE (coor_chr,'(F10.1)') -1.0
	844	ELSE
	845	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	846	ENDIF
[1]	847	coor_chr = ADJUSTL( coor_chr )
	848	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	849
	850	i = i + 1
	851	ENDDO
	852	IF ( av == 0 ) THEN
	853	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	854	TRIM( begin_chr ), 'k', TRIM( slices ), &
	855	TRIM( coordinates )
	856	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	857	WRITE ( io, 339 ) skip_time_do2d_xy
	858	ENDIF
	859	ELSE
	860	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	861	TRIM( begin_chr ), averaging_interval, &
	862	dt_averaging_input, 'k', TRIM( slices ), &
	863	TRIM( coordinates )
	864	IF ( skip_time_data_output_av /= 0.0 ) THEN
	865	WRITE ( io, 339 ) skip_time_data_output_av
	866	ENDIF
	867	ENDIF
	868
	869	ENDIF
	870
	871	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	872	i = 1
	873	slices = '/'
	874	coordinates = '/'
	875	!
	876	!-- Building strings with index and coordinate informations of the
	877	!-- slices
	878	DO WHILE ( section(i,2) /= -9999 )
	879
	880	WRITE (section_chr,'(I5)') section(i,2)
	881	section_chr = ADJUSTL( section_chr )
	882	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	883
	884	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	885	coor_chr = ADJUSTL( coor_chr )
	886	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	887
	888	i = i + 1
	889	ENDDO
	890	IF ( av == 0 ) THEN
	891	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	892	TRIM( begin_chr ), 'j', TRIM( slices ), &
	893	TRIM( coordinates )
	894	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	895	WRITE ( io, 339 ) skip_time_do2d_xz
	896	ENDIF
	897	ELSE
	898	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	899	TRIM( begin_chr ), averaging_interval, &
	900	dt_averaging_input, 'j', TRIM( slices ), &
	901	TRIM( coordinates )
	902	IF ( skip_time_data_output_av /= 0.0 ) THEN
	903	WRITE ( io, 339 ) skip_time_data_output_av
	904	ENDIF
	905	ENDIF
	906	ENDIF
	907
	908	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	909	i = 1
	910	slices = '/'
	911	coordinates = '/'
	912	!
	913	!-- Building strings with index and coordinate informations of the
	914	!-- slices
	915	DO WHILE ( section(i,3) /= -9999 )
	916
	917	WRITE (section_chr,'(I5)') section(i,3)
	918	section_chr = ADJUSTL( section_chr )
	919	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	920
	921	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	922	coor_chr = ADJUSTL( coor_chr )
	923	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	924
	925	i = i + 1
	926	ENDDO
	927	IF ( av == 0 ) THEN
	928	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	929	TRIM( begin_chr ), 'i', TRIM( slices ), &
	930	TRIM( coordinates )
	931	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	932	WRITE ( io, 339 ) skip_time_do2d_yz
	933	ENDIF
	934	ELSE
	935	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	936	TRIM( begin_chr ), averaging_interval, &
	937	dt_averaging_input, 'i', TRIM( slices ), &
	938	TRIM( coordinates )
	939	IF ( skip_time_data_output_av /= 0.0 ) THEN
	940	WRITE ( io, 339 ) skip_time_data_output_av
	941	ENDIF
	942	ENDIF
	943	ENDIF
	944
	945	ENDIF
	946
	947	ENDDO
	948
	949	!
	950	!-- 3d-arrays
	951	DO av = 0, 1
	952
	953	i = 1
	954	do3d_chr = ''
	955	DO WHILE ( do3d(av,i) /= ' ' )
	956
	957	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	958	i = i + 1
	959
	960	ENDDO
	961
	962	IF ( do3d_chr /= '' ) THEN
	963	IF ( av == 0 ) THEN
	964	WRITE ( io, 336 ) ''
	965	ELSE
	966	WRITE ( io, 336 ) '(time-averaged)'
	967	ENDIF
	968
	969	output_format = ''
	970	IF ( netcdf_output ) THEN
[1031]	971	output_format = output_format_netcdf
[1]	972	ENDIF
	973	IF ( avs_output ) THEN
	974	IF ( netcdf_output ) THEN
[1031]	975	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	976	ELSE
	977	output_format = 'avs'
	978	ENDIF
	979	ENDIF
[292]	980	WRITE ( io, 344 ) output_format
[1]	981
	982	IF ( do3d_at_begin ) THEN
	983	begin_chr = 'and at the start'
	984	ELSE
	985	begin_chr = ''
	986	ENDIF
	987	IF ( av == 0 ) THEN
	988	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	989	zu(nz_do3d), nz_do3d
	990	ELSE
	991	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	992	TRIM( begin_chr ), averaging_interval, &
	993	dt_averaging_input, zu(nz_do3d), nz_do3d
	994	ENDIF
	995
	996	IF ( do3d_compress ) THEN
	997	do3d_chr = ''
	998	i = 1
	999	DO WHILE ( do3d(av,i) /= ' ' )
	1000
	1001	SELECT CASE ( do3d(av,i) )
	1002	CASE ( 'u' )
	1003	j = 1
	1004	CASE ( 'v' )
	1005	j = 2
	1006	CASE ( 'w' )
	1007	j = 3
	1008	CASE ( 'p' )
	1009	j = 4
	1010	CASE ( 'pt' )
	1011	j = 5
	1012	END SELECT
	1013	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1014	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1015	':' // prec // ','
	1016	i = i + 1
	1017
	1018	ENDDO
	1019	WRITE ( io, 338 ) do3d_chr
	1020
	1021	ENDIF
	1022
	1023	IF ( av == 0 ) THEN
	1024	IF ( skip_time_do3d /= 0.0 ) THEN
	1025	WRITE ( io, 339 ) skip_time_do3d
	1026	ENDIF
	1027	ELSE
	1028	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1029	WRITE ( io, 339 ) skip_time_data_output_av
	1030	ENDIF
	1031	ENDIF
	1032
	1033	ENDIF
	1034
	1035	ENDDO
	1036
	1037	!
[410]	1038	!-- masked arrays
	1039	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1040	mask_scale_x, mask_scale_y, mask_scale_z
	1041	DO mid = 1, masks
	1042	DO av = 0, 1
	1043
	1044	i = 1
	1045	domask_chr = ''
	1046	DO WHILE ( domask(mid,av,i) /= ' ' )
	1047	domask_chr = TRIM( domask_chr ) // ' ' // &
	1048	TRIM( domask(mid,av,i) ) // ','
	1049	i = i + 1
	1050	ENDDO
	1051
	1052	IF ( domask_chr /= '' ) THEN
	1053	IF ( av == 0 ) THEN
	1054	WRITE ( io, 346 ) '', mid
	1055	ELSE
	1056	WRITE ( io, 346 ) ' (time-averaged)', mid
	1057	ENDIF
	1058
[1031]	1059	output_format = ' '
[410]	1060	IF ( netcdf_output ) THEN
[1031]	1061	output_format = output_format_netcdf
[410]	1062	ENDIF
	1063	WRITE ( io, 344 ) output_format
	1064
	1065	IF ( av == 0 ) THEN
	1066	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1067	ELSE
	1068	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1069	averaging_interval, dt_averaging_input
	1070	ENDIF
	1071
	1072	IF ( av == 0 ) THEN
	1073	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1074	WRITE ( io, 339 ) skip_time_domask(mid)
	1075	ENDIF
	1076	ELSE
	1077	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1078	WRITE ( io, 339 ) skip_time_data_output_av
	1079	ENDIF
	1080	ENDIF
	1081	!
	1082	!-- output locations
	1083	DO dim = 1, 3
	1084	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1085	count = 0
	1086	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1087	count = count + 1
	1088	ENDDO
	1089	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1090	mask(mid,dim,:count)
	1091	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1092	mask_loop(mid,dim,2) < 0.0 .AND. &
	1093	mask_loop(mid,dim,3) == 0.0 ) THEN
	1094	WRITE ( io, 350 ) dir(dim), dir(dim)
	1095	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1096	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1097	mask_loop(mid,dim,1:2)
	1098	ELSE
	1099	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1100	mask_loop(mid,dim,1:3)
	1101	ENDIF
	1102	ENDDO
	1103	ENDIF
	1104
	1105	ENDDO
	1106	ENDDO
	1107
	1108	!
[1]	1109	!-- Timeseries
	1110	IF ( dt_dots /= 9999999.9 ) THEN
	1111	WRITE ( io, 340 )
	1112
	1113	output_format = ''
	1114	IF ( netcdf_output ) THEN
[1031]	1115	output_format = output_format_netcdf
[1]	1116	ENDIF
[292]	1117	WRITE ( io, 344 ) output_format
[1]	1118	WRITE ( io, 341 ) dt_dots
	1119	ENDIF
	1120
	1121	#if defined( __dvrp_graphics )
	1122	!
	1123	!-- Dvrp-output
	1124	IF ( dt_dvrp /= 9999999.9 ) THEN
	1125	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1126	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1127	i = 1
	1128	l = 0
[336]	1129	m = 0
[1]	1130	DO WHILE ( mode_dvrp(i) /= ' ' )
	1131	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1132	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1133	l = l + 1
	1134	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1135	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1136	isosurface_color(:,l)
[1]	1137	ENDIF
	1138	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1139	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1140	m = m + 1
	1141	IF ( do2d(0,j) /= ' ' ) THEN
	1142	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1143	slicer_range_limits_dvrp(:,m)
	1144	ENDIF
[1]	1145	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1146	WRITE ( io, 363 ) dvrp_psize
	1147	IF ( particle_dvrpsize /= 'none' ) THEN
	1148	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1149	dvrpsize_interval
	1150	ENDIF
	1151	IF ( particle_color /= 'none' ) THEN
	1152	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1153	color_interval
	1154	ENDIF
[1]	1155	ENDIF
	1156	i = i + 1
	1157	ENDDO
[237]	1158
[336]	1159	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1160	superelevation_y, superelevation, clip_dvrp_l, &
	1161	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1162
	1163	IF ( TRIM( topography ) /= 'flat' ) THEN
	1164	WRITE ( io, 366 ) topography_color
	1165	IF ( cluster_size > 1 ) THEN
	1166	WRITE ( io, 367 ) cluster_size
	1167	ENDIF
[237]	1168	ENDIF
	1169
[1]	1170	ENDIF
	1171	#endif
	1172
	1173	#if defined( __spectra )
	1174	!
	1175	!-- Spectra output
	1176	IF ( dt_dosp /= 9999999.9 ) THEN
	1177	WRITE ( io, 370 )
	1178
[1031]	1179	output_format = ' '
[1]	1180	IF ( netcdf_output ) THEN
[1031]	1181	output_format = output_format_netcdf
[1]	1182	ENDIF
[292]	1183	WRITE ( io, 344 ) output_format
[1]	1184	WRITE ( io, 371 ) dt_dosp
	1185	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1186	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1187	( spectra_direction(i), i = 1,10 ), &
[189]	1188	( comp_spectra_level(i), i = 1,100 ), &
	1189	( plot_spectra_level(i), i = 1,100 ), &
[1]	1190	averaging_interval_sp, dt_averaging_input_pr
	1191	ENDIF
	1192	#endif
	1193
	1194	WRITE ( io, 99 )
	1195
	1196	!
	1197	!-- Physical quantities
	1198	WRITE ( io, 400 )
	1199
	1200	!
	1201	!-- Geostrophic parameters
	1202	WRITE ( io, 410 ) omega, phi, f, fs
	1203
	1204	!
	1205	!-- Other quantities
	1206	WRITE ( io, 411 ) g
[97]	1207	IF ( use_reference ) THEN
	1208	IF ( ocean ) THEN
	1209	WRITE ( io, 412 ) prho_reference
	1210	ELSE
	1211	WRITE ( io, 413 ) pt_reference
	1212	ENDIF
	1213	ENDIF
[1]	1214
	1215	!
	1216	!-- Cloud physics parameters
	1217	IF ( cloud_physics ) THEN
[57]	1218	WRITE ( io, 415 )
	1219	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1220	ENDIF
	1221
	1222	!-- Profile of the geostrophic wind (component ug)
	1223	!-- Building output strings
	1224	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1225	gradients = '------'
	1226	slices = ' 0'
	1227	coordinates = ' 0.0'
	1228	i = 1
	1229	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1230
[167]	1231	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1232	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1233
[167]	1234	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1235	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1236
[167]	1237	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1238	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1239
[167]	1240	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1241	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1242
[430]	1243	IF ( i == 10 ) THEN
	1244	EXIT
	1245	ELSE
	1246	i = i + 1
	1247	ENDIF
	1248
[1]	1249	ENDDO
	1250
	1251	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1252	TRIM( gradients ), TRIM( slices )
	1253
	1254	!-- Profile of the geostrophic wind (component vg)
	1255	!-- Building output strings
	1256	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1257	gradients = '------'
	1258	slices = ' 0'
	1259	coordinates = ' 0.0'
	1260	i = 1
	1261	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1262
[167]	1263	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1264	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1265
[167]	1266	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1267	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1268
[167]	1269	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1270	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1271
[167]	1272	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1273	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1274
[430]	1275	IF ( i == 10 ) THEN
	1276	EXIT
	1277	ELSE
	1278	i = i + 1
	1279	ENDIF
	1280
[1]	1281	ENDDO
	1282
	1283	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1284	TRIM( gradients ), TRIM( slices )
	1285
	1286	!
[767]	1287	!-- Initial wind profiles
	1288	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1289
	1290	!
[1]	1291	!-- Initial temperature profile
	1292	!-- Building output strings, starting with surface temperature
	1293	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1294	gradients = '------'
	1295	slices = ' 0'
	1296	coordinates = ' 0.0'
	1297	i = 1
	1298	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1299
[94]	1300	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1301	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1302
[94]	1303	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1304	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1305
[94]	1306	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1307	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1308
[94]	1309	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1310	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1311
[430]	1312	IF ( i == 10 ) THEN
	1313	EXIT
	1314	ELSE
	1315	i = i + 1
	1316	ENDIF
	1317
[1]	1318	ENDDO
	1319
	1320	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1321	TRIM( gradients ), TRIM( slices )
	1322
	1323	!
	1324	!-- Initial humidity profile
	1325	!-- Building output strings, starting with surface humidity
[75]	1326	IF ( humidity .OR. passive_scalar ) THEN
[1]	1327	WRITE ( temperatures, '(E8.1)' ) q_surface
	1328	gradients = '--------'
	1329	slices = ' 0'
	1330	coordinates = ' 0.0'
	1331	i = 1
	1332	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1333
	1334	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1335	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1336
	1337	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1338	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1339
	1340	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1341	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1342
	1343	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1344	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1345
[430]	1346	IF ( i == 10 ) THEN
	1347	EXIT
	1348	ELSE
	1349	i = i + 1
	1350	ENDIF
	1351
[1]	1352	ENDDO
	1353
[75]	1354	IF ( humidity ) THEN
[1]	1355	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1356	TRIM( gradients ), TRIM( slices )
	1357	ELSE
	1358	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1359	TRIM( gradients ), TRIM( slices )
	1360	ENDIF
	1361	ENDIF
	1362
	1363	!
[97]	1364	!-- Initial salinity profile
	1365	!-- Building output strings, starting with surface salinity
	1366	IF ( ocean ) THEN
	1367	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1368	gradients = '------'
	1369	slices = ' 0'
	1370	coordinates = ' 0.0'
	1371	i = 1
	1372	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1373
	1374	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1375	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1376
	1377	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1378	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1379
	1380	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1381	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1382
	1383	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1384	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1385
[430]	1386	IF ( i == 10 ) THEN
	1387	EXIT
	1388	ELSE
	1389	i = i + 1
	1390	ENDIF
	1391
[97]	1392	ENDDO
	1393
	1394	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1395	TRIM( gradients ), TRIM( slices )
	1396	ENDIF
	1397
	1398	!
[411]	1399	!-- Profile for the large scale vertial velocity
	1400	!-- Building output strings, starting with surface value
	1401	IF ( large_scale_subsidence ) THEN
	1402	temperatures = ' 0.0'
	1403	gradients = '------'
	1404	slices = ' 0'
	1405	coordinates = ' 0.0'
	1406	i = 1
[580]	1407	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1408
	1409	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1410	w_subs(subs_vertical_gradient_level_i(i))
[411]	1411	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1412
[580]	1413	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1414	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1415
[580]	1416	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1417	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1418
[580]	1419	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1420	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1421
[430]	1422	IF ( i == 10 ) THEN
	1423	EXIT
	1424	ELSE
	1425	i = i + 1
	1426	ENDIF
	1427
[411]	1428	ENDDO
	1429
	1430	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1431	TRIM( gradients ), TRIM( slices )
	1432	ENDIF
	1433
	1434	!
[824]	1435	!-- Cloud physcis parameters / quantities / numerical methods
	1436	WRITE ( io, 430 )
	1437	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1438	WRITE ( io, 431 )
	1439	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1440	WRITE ( io, 432 )
	1441	IF ( radiation ) WRITE ( io, 132 )
	1442	IF ( precipitation ) WRITE ( io, 133 )
	1443	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1444	WRITE ( io, 433 )
	1445	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1446	IF ( collision_kernel /= 'none' ) THEN
	1447	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1448	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1449	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1450	ENDIF
[825]	1451	ELSE
[828]	1452	WRITE ( io, 437 )
[825]	1453	ENDIF
[824]	1454	ENDIF
	1455
	1456	!
[1]	1457	!-- LES / turbulence parameters
	1458	WRITE ( io, 450 )
	1459
	1460	!--
	1461	! ... LES-constants used must still be added here
	1462	!--
	1463	IF ( constant_diffusion ) THEN
	1464	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1465	prandtl_number
	1466	ENDIF
	1467	IF ( .NOT. constant_diffusion) THEN
[108]	1468	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1469	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1470	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1471	ENDIF
	1472
	1473	!
	1474	!-- Special actions during the run
	1475	WRITE ( io, 470 )
	1476	IF ( create_disturbances ) THEN
	1477	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1478	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1479	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1480	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1481	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1482	ELSE
	1483	WRITE ( io, 473 ) disturbance_energy_limit
	1484	ENDIF
	1485	WRITE ( io, 474 ) TRIM( random_generator )
	1486	ENDIF
	1487	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1488	WRITE ( io, 475 ) pt_surface_initial_change
	1489	ENDIF
[75]	1490	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1491	WRITE ( io, 476 ) q_surface_initial_change
	1492	ENDIF
	1493	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1494	WRITE ( io, 477 ) q_surface_initial_change
	1495	ENDIF
	1496
[60]	1497	IF ( particle_advection ) THEN
[1]	1498	!
[60]	1499	!-- Particle attributes
	1500	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1501	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1502	end_time_prel, dt_sort_particles
[60]	1503	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1504	IF ( random_start_position ) WRITE ( io, 481 )
	1505	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1506	WRITE ( io, 495 ) total_number_of_particles
[824]	1507	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1508	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1509	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1510	WRITE ( io, 484 ) total_number_of_tails, &
	1511	minimum_tailpoint_distance, &
	1512	maximum_tailpoint_age
	1513	ENDIF
[1]	1514	ENDIF
[60]	1515	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1516	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1517	output_format = ' '
[60]	1518	IF ( netcdf_output ) THEN
[493]	1519	IF ( netcdf_data_format > 1 ) THEN
[60]	1520	output_format = 'netcdf (64 bit offset) and binary'
	1521	ELSE
	1522	output_format = 'netcdf and binary'
	1523	ENDIF
[1]	1524	ELSE
[60]	1525	output_format = 'binary'
[1]	1526	ENDIF
[292]	1527	WRITE ( io, 344 ) output_format
[1]	1528	ENDIF
[60]	1529	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1530	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1531
[60]	1532	WRITE ( io, 487 ) number_of_particle_groups
[1]	1533
[60]	1534	DO i = 1, number_of_particle_groups
	1535	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1536	WRITE ( io, 490 ) i, 0.0
	1537	WRITE ( io, 492 )
[1]	1538	ELSE
[60]	1539	WRITE ( io, 490 ) i, radius(i)
	1540	IF ( density_ratio(i) /= 0.0 ) THEN
	1541	WRITE ( io, 491 ) density_ratio(i)
	1542	ELSE
	1543	WRITE ( io, 492 )
	1544	ENDIF
[1]	1545	ENDIF
[60]	1546	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1547	pdx(i), pdy(i), pdz(i)
[336]	1548	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1549	ENDDO
[1]	1550
[60]	1551	ENDIF
[1]	1552
[60]	1553
[1]	1554	!
	1555	!-- Parameters of 1D-model
	1556	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1557	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1558	mixing_length_1d, dissipation_1d
	1559	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1560	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1561	ENDIF
	1562	ENDIF
	1563
	1564	!
	1565	!-- User-defined informations
	1566	CALL user_header( io )
	1567
	1568	WRITE ( io, 99 )
	1569
	1570	!
	1571	!-- Write buffer contents to disc immediately
[82]	1572	CALL local_flush( io )
[1]	1573
	1574	!
	1575	!-- Here the FORMATs start
	1576
	1577	99 FORMAT (1X,78('-'))
[200]	1578	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1579	1X,'* ',A,' *',9X,A/ &
	1580	1X,'***************************',9X,42('-'))
[291]	1581	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1582	37X,42('-'))
[200]	1583	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1584	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1585	' Run on host: ',A10)
[1]	1586	#if defined( __parallel )
[200]	1587	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1588	')',1X,A)
[200]	1589	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1590	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1591	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1592	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1593	37X,'because the job is running on an SMP-cluster')
[102]	1594	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1595	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1596	#endif
	1597	110 FORMAT (/' Numerical Schemes:'/ &
	1598	' -----------------'/)
	1599	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1600	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1601	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1602	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1603	' or Upstream')
	1604	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1605	' or Upstream')
	1606	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1607	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1608	' Translation velocity = ',A/ &
	1609	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1610	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1611	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1612	' maximum damping coefficient: ',F5.3, ' 1/s')
	1613	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1614	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1615	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1616	F6.2, ' K assumed')
[824]	1617	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1618	' effective emissivity scheme')
[824]	1619	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1620	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1621	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1622	A,'-cycle)'/ &
	1623	' number of grid levels: ',I2/ &
	1624	' Gauss-Seidel red/black iterations: ',I2)
	1625	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1626	I3,')')
	1627	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1628	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1629	I3,')'/ &
	1630	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1631	I3,')')
	1632	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1633	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1634	140 FORMAT (' maximum residual allowed: ',E10.3)
	1635	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1636	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1637	'step')
[87]	1638	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1639	'kinetic energy')
[927]	1640	144 FORMAT (' masking method is used')
[1]	1641	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1642	'conserved'/ &
	1643	' using the ',A,' mode')
	1644	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1645	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1646	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1647	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1648	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1649	'prognostic equation for')
	1650	154 FORMAT (' the potential temperature')
[1]	1651	200 FORMAT (//' Run time and time step information:'/ &
	1652	' ----------------------------------'/)
	1653	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1654	' CFL-factor: ',F4.2)
	1655	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1656	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1657	' End time: ',F9.3,' s')
	1658	204 FORMAT ( A,F9.3,' s')
	1659	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1660	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1661	' CPU-time used: ',F9.3,' s per timestep: ', &
	1662	' ',F9.3,' s'/ &
	1663	' per second of simulated tim', &
	1664	'e: ',F9.3,' s')
[291]	1665	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1666	250 FORMAT (//' Computational grid and domain size:'/ &
	1667	' ----------------------------------'// &
	1668	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1669	' m dz = ',F7.3,' m'/ &
	1670	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1671	' m z(u) = ',F10.3,' m'/)
	1672	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1673	' factor: ',F5.3/ &
	1674	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1675	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1676	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1677	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1678	' degrees')
	1679	270 FORMAT (//' Topography informations:'/ &
	1680	' -----------------------'// &
	1681	1X,'Topography: ',A)
	1682	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1683	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1684	' / ',I4)
[240]	1685	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1686	' direction' / &
	1687	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1688	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1689	278 FORMAT (' Topography grid definition convention:'/ &
	1690	' cell edge (staggered grid points'/ &
	1691	' (u in x-direction, v in y-direction))' /)
	1692	279 FORMAT (' Topography grid definition convention:'/ &
	1693	' cell center (scalar grid points)' /)
[138]	1694	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1695	' ------------------------------'// &
	1696	' Canopy mode: ', A / &
	1697	' Canopy top: ',I4 / &
	1698	' Leaf drag coefficient: ',F6.2 /)
[153]	1699	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1700	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1701	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1702	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1703	' Height: ',A,' m'/ &
	1704	' Leaf area density: ',A,' m2/m3'/ &
	1705	' Gradient: ',A,' m2/m4'/ &
	1706	' Gridpoint: ',A)
	1707
[1]	1708	300 FORMAT (//' Boundary conditions:'/ &
	1709	' -------------------'// &
	1710	' p uv ', &
	1711	' pt'// &
	1712	' B. bound.: ',A/ &
	1713	' T. bound.: ',A)
[97]	1714	301 FORMAT (/' ',A// &
[1]	1715	' B. bound.: ',A/ &
	1716	' T. bound.: ',A)
[19]	1717	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1718	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1719	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1720	'computational u,v-level:'// &
[978]	1721	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1722	' m kappa = ',F4.2/ &
[1]	1723	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1724	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1725	307 FORMAT (' Heatflux has a random normal distribution')
	1726	308 FORMAT (' Predefined surface temperature')
[97]	1727	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1728	310 FORMAT (//' 1D-Model:'// &
	1729	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1730	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1731	312 FORMAT (' Predefined surface humidity')
	1732	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1733	314 FORMAT (' Predefined scalar value at the surface')
[19]	1734	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1735	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1736	'atmosphere model')
[1]	1737	317 FORMAT (//' Lateral boundaries:'/ &
	1738	' left/right: ',A/ &
	1739	' north/south: ',A)
[978]	1740	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1741	'damping factor = ',F6.4)
[151]	1742	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1743	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1744	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1745	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1746	' v: ',F9.6,' m2/s2')
[151]	1747	325 FORMAT (//' List output:'/ &
[1]	1748	' -----------'// &
	1749	' 1D-Profiles:'/ &
	1750	' Output every ',F8.2,' s')
[151]	1751	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1752	' Averaging input every ',F8.2,' s')
	1753	330 FORMAT (//' Data output:'/ &
	1754	' -----------'/)
	1755	331 FORMAT (/' 1D-Profiles:')
	1756	332 FORMAT (/' ',A)
	1757	333 FORMAT (' Output every ',F8.2,' s',/ &
	1758	' Time averaged over ',F8.2,' s'/ &
	1759	' Averaging input every ',F8.2,' s')
	1760	334 FORMAT (/' 2D-Arrays',A,':')
	1761	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1762	' Output every ',F8.2,' s ',A/ &
	1763	' Cross sections at ',A1,' = ',A/ &
	1764	' scalar-coordinates: ',A,' m'/)
	1765	336 FORMAT (/' 3D-Arrays',A,':')
	1766	337 FORMAT (/' Arrays: ',A/ &
	1767	' Output every ',F8.2,' s ',A/ &
	1768	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1769	338 FORMAT (' Compressed data output'/ &
	1770	' Decimal precision: ',A/)
	1771	339 FORMAT (' No output during initial ',F8.2,' s')
	1772	340 FORMAT (/' Time series:')
	1773	341 FORMAT (' Output every ',F8.2,' s'/)
	1774	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1775	' Output every ',F8.2,' s ',A/ &
	1776	' Time averaged over ',F8.2,' s'/ &
	1777	' Averaging input every ',F8.2,' s'/ &
	1778	' Cross sections at ',A1,' = ',A/ &
	1779	' scalar-coordinates: ',A,' m'/)
	1780	343 FORMAT (/' Arrays: ',A/ &
	1781	' Output every ',F8.2,' s ',A/ &
	1782	' Time averaged over ',F8.2,' s'/ &
	1783	' Averaging input every ',F8.2,' s'/ &
	1784	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1785	344 FORMAT (' Output format: ',A/)
[410]	1786	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1787	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1788	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1789	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1790	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1791	347 FORMAT (' Variables: ',A/ &
	1792	' Output every ',F8.2,' s')
	1793	348 FORMAT (' Variables: ',A/ &
	1794	' Output every ',F8.2,' s'/ &
	1795	' Time averaged over ',F8.2,' s'/ &
	1796	' Averaging input every ',F8.2,' s')
	1797	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1798	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1799	13(' ',8(F8.2,',')/) )
	1800	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1801	'all gridpoints along ',A,'-direction (default).' )
	1802	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1803	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1804	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1805	#if defined( __dvrp_graphics )
	1806	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1807	' Output every ',F7.1,' s'/ &
	1808	' Output mode: ',A/ &
	1809	' Host / User: ',A,' / ',A/ &
	1810	' Directory: ',A// &
	1811	' The sequence contains:')
[337]	1812	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1813	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1814	362 FORMAT (/' Slicer plane ',A/ &
[336]	1815	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1816	363 FORMAT (/' Particles'/ &
[336]	1817	' particle size: ',F7.2,' m')
	1818	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1819	F6.2,',',F6.2,']')
[337]	1820	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1821	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1822	')'/ &
	1823	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1824	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1825	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1826	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1827	#endif
	1828	#if defined( __spectra )
	1829	370 FORMAT (' Spectra:')
	1830	371 FORMAT (' Output every ',F7.1,' s'/)
	1831	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1832	' Directions: ', 10(A5,',')/ &
[189]	1833	' height levels k = ', 20(I3,',')/ &
	1834	' ', 20(I3,',')/ &
	1835	' ', 20(I3,',')/ &
	1836	' ', 20(I3,',')/ &
	1837	' ', 19(I3,','),I3,'.'/ &
[1]	1838	' height levels selected for standard plot:'/ &
[189]	1839	' k = ', 20(I3,',')/ &
	1840	' ', 20(I3,',')/ &
	1841	' ', 20(I3,',')/ &
	1842	' ', 20(I3,',')/ &
	1843	' ', 19(I3,','),I3,'.'/ &
[1]	1844	' Time averaged over ', F7.1, ' s,' / &
	1845	' Profiles for the time averaging are taken every ', &
	1846	F6.1,' s')
	1847	#endif
	1848	400 FORMAT (//' Physical quantities:'/ &
	1849	' -------------------'/)
	1850	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1851	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1852	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1853	' f* = ',F9.6,' 1/s')
	1854	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1855	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1856	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1857	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1858	' ------------------------'/)
[57]	1859	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1860	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1861	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1862	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1863	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1864	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1865	' Height: ',A,' m'/ &
	1866	' Temperature: ',A,' K'/ &
	1867	' Gradient: ',A,' K/100m'/ &
	1868	' Gridpoint: ',A)
	1869	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1870	' Height: ',A,' m'/ &
	1871	' Humidity: ',A,' kg/kg'/ &
	1872	' Gradient: ',A,' (kg/kg)/100m'/ &
	1873	' Gridpoint: ',A)
	1874	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1875	' Height: ',A,' m'/ &
	1876	' Scalar concentration: ',A,' kg/m**3'/ &
	1877	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1878	' Gridpoint: ',A)
	1879	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1880	' Height: ',A,' m'/ &
	1881	' ug: ',A,' m/s'/ &
	1882	' Gradient: ',A,' 1/100s'/ &
	1883	' Gridpoint: ',A)
	1884	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1885	' Height: ',A,' m'/ &
[97]	1886	' vg: ',A,' m/s'/ &
[1]	1887	' Gradient: ',A,' 1/100s'/ &
	1888	' Gridpoint: ',A)
[97]	1889	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1890	' Height: ',A,' m'/ &
	1891	' Salinity: ',A,' psu'/ &
	1892	' Gradient: ',A,' psu/100m'/ &
	1893	' Gridpoint: ',A)
[411]	1894	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1895	' Height: ',A,' m'/ &
	1896	' w_subs: ',A,' m/s'/ &
	1897	' Gradient: ',A,' (m/s)/100m'/ &
	1898	' Gridpoint: ',A)
[767]	1899	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1900	' profiles')
[824]	1901	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1902	' ----------------------------------'/)
	1903	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1904	'on)')
	1905	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1906	' total water content is used.'/ &
	1907	' Condensation is parameterized via 0% - or 100% scheme.')
	1908	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1909	'icle model')
	1910	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1911	' droplets < 1.0E-6 m')
[825]	1912	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1913	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1914	'are used'/ &
	1915	' number of radius classes: ',I3,' interval ', &
	1916	'[1.0E-6,2.0E-4] m'/ &
	1917	' number of dissipation classes: ',I2,' interval ', &
	1918	'[0,1000] cm2/s3')
	1919	437 FORMAT (' Droplet collision is switched off')
[1]	1920	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1921	' ---------------------------'/)
[824]	1922	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1923	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1924	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1925	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1926	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1927	470 FORMAT (//' Actions during the simulation:'/ &
	1928	' -----------------------------'/)
[94]	1929	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1930	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1931	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1932	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1933	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1934	' to i/j =',I4)
	1935	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1936	1X,F5.3, ' m2/s2')
	1937	474 FORMAT (' Random number generator used : ',A/)
	1938	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1939	'respectively, if'/ &
	1940	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1941	' 3D-simulation'/)
	1942	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1943	'respectively, if the'/ &
	1944	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1945	' the 3D-simulation'/)
	1946	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1947	'respectively, if the'/ &
	1948	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1949	' the 3D-simulation'/)
	1950	480 FORMAT (' Particles:'/ &
	1951	' ---------'// &
	1952	' Particle advection is active (switched on at t = ', F7.1, &
	1953	' s)'/ &
	1954	' Start of new particle generations every ',F6.1,' s'/ &
	1955	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1956	' bottom: ', A, ' top: ', A/&
	1957	' Maximum particle age: ',F9.1,' s'/ &
[117]	1958	' Advection stopped at t = ',F9.1,' s'/ &
	1959	' Particles are sorted every ',F9.1,' s'/)
[1]	1960	481 FORMAT (' Particles have random start positions'/)
[336]	1961	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1962	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1963	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1964	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1965	' Maximum age of the end of the tail: ',F8.2,' s')
	1966	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1967	486 FORMAT (' Particle statistics are written on file'/)
	1968	487 FORMAT (' Number of particle groups: ',I2/)
	1969	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1970	' minimum timestep for advection: ', F7.5/)
	1971	489 FORMAT (' Number of particles simultaneously released at each ', &
	1972	'point: ', I5/)
	1973	490 FORMAT (' Particle group ',I2,':'/ &
	1974	' Particle radius: ',E10.3, 'm')
	1975	491 FORMAT (' Particle inertia is activated'/ &
	1976	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1977	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1978	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1979	' y:',F8.1,' - ',F8.1,' m'/&
	1980	' z:',F8.1,' - ',F8.1,' m'/&
	1981	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1982	' m dz = ',F8.1,' m'/)
	1983	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1984	F8.2,' s'/)
	1985	495 FORMAT (' Number of particles in total domain: ',I10/)
	1986	500 FORMAT (//' 1D-Model parameters:'/ &
	1987	' -------------------'// &
	1988	' Simulation time: ',F8.1,' s'/ &
	1989	' Run-controll output every: ',F8.1,' s'/ &
	1990	' Vertical profile output every: ',F8.1,' s'/ &
	1991	' Mixing length calculation: ',A/ &
	1992	' Dissipation calculation: ',A/)
	1993	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1994	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1995	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1996
	1997
	1998	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |