Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1032

Last change on this file since 1032 was 1031, checked in by raasch, 12 years ago
netCDF4 without parallel file support implemented additional define string netcdf4_parallel is required to switch on parallel file support
Property svn:keywords set to `Id`
File size: 75.5 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[1031]	6	! output of netCDF data format modified
[941]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 1031 2012-10-19 14:35:30Z letzel $
	11	!
[1017]	12	! 1015 2012-09-27 09:23:24Z raasch
	13	! output of Aajustment of mixing length to the Prandtl mixing length at first
	14	! grid point above ground removed
	15	!
[1004]	16	! 1003 2012-09-14 14:35:53Z raasch
	17	! output of information about equal/unequal subdomain size removed
	18	!
[1002]	19	! 1001 2012-09-13 14:08:46Z raasch
	20	! all actions concerning leapfrog- and upstream-spline-scheme removed
	21	!
[979]	22	! 978 2012-08-09 08:28:32Z fricke
	23	! -km_damp_max, outflow_damping_width
	24	! +pt_damping_factor, pt_damping_width
	25	! +z0h
	26	!
[965]	27	! 964 2012-07-26 09:14:24Z raasch
	28	! output of profil-related quantities removed
	29	!
[941]	30	! 940 2012-07-09 14:31:00Z raasch
	31	! Output in case of simulations for pure neutral stratification (no pt-equation
	32	! solved)
	33	!
[928]	34	! 927 2012-06-06 19:15:04Z raasch
	35	! output of masking_method for mg-solver
	36	!
[869]	37	! 868 2012-03-28 12:21:07Z raasch
	38	! translation velocity in Galilean transformation changed to 0.6 * ug
	39	!
[834]	40	! 833 2012-02-22 08:55:55Z maronga
	41	! Adjusted format for leaf area density
	42	!
[829]	43	! 828 2012-02-21 12:00:36Z raasch
	44	! output of dissipation_classes + radius_classes
	45	!
[826]	46	! 825 2012-02-19 03:03:44Z raasch
	47	! Output of cloud physics parameters/quantities complemented and restructured
	48	!
[768]	49	! 767 2011-10-14 06:39:12Z raasch
	50	! Output of given initial u,v-profiles
	51	!
[760]	52	! 759 2011-09-15 13:58:31Z raasch
	53	! output of maximum number of parallel io streams
	54	!
[708]	55	! 707 2011-03-29 11:39:40Z raasch
	56	! bc_lr/ns replaced by bc_lr/ns_cyc
	57	!
[668]	58	! 667 2010-12-23 12:06:00Z suehring/gryschka
	59	! Output of advection scheme.
	60	! Modified output of Prandtl-layer height.
	61	!
[581]	62	! 580 2010-10-05 13:59:11Z heinze
	63	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	64	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	65	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	66	!
[494]	67	! 493 2010-03-01 08:30:24Z raasch
	68	! NetCDF data output format extendend for NetCDF4/HDF5
	69	!
[482]	70	! 449 2010-02-02 11:23:59Z raasch
	71	! +large scale vertical motion (subsidence/ascent)
	72	! Bugfix: index problem concerning gradient_level indices removed
	73	!
[449]	74	! 410 2009-12-04 17:05:40Z letzel
	75	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	76	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	77	!
[392]	78	! 346 2009-07-06 10:13:41Z raasch
[328]	79	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	80	! Coupling with independent precursor runs.
[254]	81	! Output of messages replaced by message handling routine.
[336]	82	! Output of several additional dvr parameters
[240]	83	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	84	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	85	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	86	! topography_grid_convention moved from user_header
[292]	87	! small bugfix concerning 3d 64bit netcdf output format
[1]	88	!
[226]	89	! 206 2008-10-13 14:59:11Z raasch
	90	! Bugfix: error in zu index in case of section_xy = -1
	91	!
[200]	92	! 198 2008-09-17 08:55:28Z raasch
	93	! Format adjustments allowing output of larger revision numbers
	94	!
[198]	95	! 197 2008-09-16 15:29:03Z raasch
	96	! allow 100 spectra levels instead of 10 for consistency with
	97	! define_netcdf_header,
	98	! bugfix in the output of the characteristic levels of potential temperature,
	99	! geostrophic wind, scalar concentration, humidity and leaf area density,
	100	! output of turbulence recycling informations
	101	!
[139]	102	! 138 2007-11-28 10:03:58Z letzel
	103	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	104	! Allow two instead of one digit to specify isosurface and slicer variables.
	105	! Output of sorting frequency of particles
	106	!
[110]	107	! 108 2007-08-24 15:10:38Z letzel
	108	! Output of informations for coupled model runs (boundary conditions etc.)
	109	! + output of momentumfluxes at the top boundary
	110	! Rayleigh damping for ocean, e_init
	111	!
[98]	112	! 97 2007-06-21 08:23:15Z raasch
	113	! Adjustments for the ocean version.
	114	! use_pt_reference renamed use_reference
	115	!
[90]	116	! 87 2007-05-22 15:46:47Z raasch
	117	! Bugfix: output of use_upstream_for_tke
	118	!
[83]	119	! 82 2007-04-16 15:40:52Z raasch
	120	! Preprocessor strings for different linux clusters changed to "lc",
	121	! routine local_flush is used for buffer flushing
	122	!
[77]	123	! 76 2007-03-29 00:58:32Z raasch
	124	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	125	! output of the loop optimization method, moisture renamed humidity,
	126	! output of subversion revision number
	127	!
[39]	128	! 19 2007-02-23 04:53:48Z raasch
	129	! Output of scalar flux applied at top boundary
	130	!
[3]	131	! RCS Log replace by Id keyword, revision history cleaned up
	132	!
[1]	133	! Revision 1.63 2006/08/22 13:53:13 raasch
	134	! Output of dz_max
	135	!
	136	! Revision 1.1 1997/08/11 06:17:20 raasch
	137	! Initial revision
	138	!
	139	!
	140	! Description:
	141	! ------------
	142	! Writing a header with all important informations about the actual run.
	143	! This subroutine is called three times, two times at the beginning
	144	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	145	! end of the run, then writing additional information about CPU-usage on file
	146	! header.
[411]	147	!-----------------------------------------------------------------------------!
[1]	148
	149	USE arrays_3d
	150	USE control_parameters
	151	USE cloud_parameters
	152	USE cpulog
	153	USE dvrp_variables
	154	USE grid_variables
	155	USE indices
	156	USE model_1d
	157	USE particle_attributes
	158	USE pegrid
[411]	159	USE subsidence_mod
[1]	160	USE spectrum
	161
	162	IMPLICIT NONE
	163
	164	CHARACTER (LEN=1) :: prec
	165	CHARACTER (LEN=2) :: do2d_mode
	166	CHARACTER (LEN=5) :: section_chr
	167	CHARACTER (LEN=9) :: time_to_string
	168	CHARACTER (LEN=10) :: coor_chr, host_chr
	169	CHARACTER (LEN=16) :: begin_chr
[200]	170	CHARACTER (LEN=23) :: ver_rev
[1]	171	CHARACTER (LEN=40) :: output_format
[167]	172	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	173	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	174	domask_chr, run_classification
[167]	175	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	176	temperatures, ugcomponent, vgcomponent
[1]	177	CHARACTER (LEN=85) :: roben, runten
	178
[410]	179	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	180
	181	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	182	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	183	REAL :: cpuseconds_per_simulated_second
	184
	185	!
	186	!-- Open the output file. At the end of the simulation, output is directed
	187	!-- to unit 19.
	188	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	189	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	190	io = 15 ! header output on file RUN_CONTROL
	191	ELSE
	192	io = 19 ! header output on file HEADER
	193	ENDIF
	194	CALL check_open( io )
	195
	196	!
	197	!-- At the end of the run, output file (HEADER) will be rewritten with
	198	!-- new informations
	199	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	200
	201	!
	202	!-- Determine kind of model run
	203	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	204	run_classification = '3D - restart run'
[328]	205	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	206	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	207	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	208	run_classification = '3D - run without 1D - prerun'
[197]	209	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	210	run_classification = '3D - run with 1D - prerun'
[197]	211	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	212	run_classification = '3D - run initialized by user'
[1]	213	ELSE
[254]	214	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	215	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	216	ENDIF
[97]	217	IF ( ocean ) THEN
	218	run_classification = 'ocean - ' // run_classification
	219	ELSE
	220	run_classification = 'atmosphere - ' // run_classification
	221	ENDIF
[1]	222
	223	!
	224	!-- Run-identification, date, time, host
	225	host_chr = host(1:10)
[75]	226	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	227	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	228	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	229	#if defined( __mpi2 )
	230	mpi_type = 2
	231	#else
	232	mpi_type = 1
	233	#endif
	234	WRITE ( io, 101 ) mpi_type, coupling_mode
	235	ENDIF
[102]	236	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	237	ADJUSTR( host_chr )
[1]	238	#if defined( __parallel )
	239	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	240	char1 = 'calculated'
	241	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	242	host(1:2) == 'lc' ) .AND. &
	243	npex == -1 .AND. pdims(2) == 1 ) THEN
	244	char1 = 'forced'
	245	ELSE
	246	char1 = 'predefined'
	247	ENDIF
	248	IF ( threads_per_task == 1 ) THEN
[102]	249	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	250	ELSE
[102]	251	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	252	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	253	ENDIF
	254	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	255	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	256	npex == -1 .AND. pdims(2) == 1 ) &
	257	THEN
[102]	258	WRITE ( io, 106 )
[1]	259	ELSEIF ( pdims(2) == 1 ) THEN
[102]	260	WRITE ( io, 107 ) 'x'
[1]	261	ELSEIF ( pdims(1) == 1 ) THEN
[102]	262	WRITE ( io, 107 ) 'y'
[1]	263	ENDIF
[102]	264	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	265	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	266	WRITE ( io, 108 ) maximum_parallel_io_streams
	267	ENDIF
[1]	268	#endif
	269	WRITE ( io, 99 )
	270
	271	!
	272	!-- Numerical schemes
	273	WRITE ( io, 110 )
	274	IF ( psolver(1:7) == 'poisfft' ) THEN
	275	WRITE ( io, 111 ) TRIM( fft_method )
	276	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	277	ELSEIF ( psolver == 'sor' ) THEN
	278	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	279	ELSEIF ( psolver == 'multigrid' ) THEN
	280	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	281	IF ( mg_cycles == -1 ) THEN
	282	WRITE ( io, 140 ) residual_limit
	283	ELSE
	284	WRITE ( io, 141 ) mg_cycles
	285	ENDIF
	286	IF ( mg_switch_to_pe0_level == 0 ) THEN
	287	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	288	nzt_mg(1)
[197]	289	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	290	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	291	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	292	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	293	nzt_mg(mg_switch_to_pe0_level), &
	294	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	295	nzt_mg(1)
	296	ENDIF
[927]	297	IF ( masking_method ) WRITE ( io, 144 )
[1]	298	ENDIF
	299	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	300	THEN
	301	WRITE ( io, 142 )
	302	ENDIF
	303
	304	IF ( momentum_advec == 'pw-scheme' ) THEN
	305	WRITE ( io, 113 )
[667]	306	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	307	WRITE ( io, 503 )
[1]	308	ENDIF
	309	IF ( scalar_advec == 'pw-scheme' ) THEN
	310	WRITE ( io, 116 )
[667]	311	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	312	WRITE ( io, 504 )
[1]	313	ELSE
	314	WRITE ( io, 118 )
	315	ENDIF
[63]	316
	317	WRITE ( io, 139 ) TRIM( loop_optimization )
	318
[1]	319	IF ( galilei_transformation ) THEN
	320	IF ( use_ug_for_galilei_tr ) THEN
[868]	321	char1 = '0.6 * geostrophic wind'
[1]	322	ELSE
	323	char1 = 'mean wind in model domain'
	324	ENDIF
	325	IF ( simulated_time_at_begin == simulated_time ) THEN
	326	char2 = 'at the start of the run'
	327	ELSE
	328	char2 = 'at the end of the run'
	329	ENDIF
	330	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	331	advected_distance_x/1000.0, advected_distance_y/1000.0
	332	ENDIF
[1001]	333	WRITE ( io, 122 ) timestep_scheme
[87]	334	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	335	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	336	IF ( .NOT. ocean ) THEN
	337	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	338	rayleigh_damping_factor
	339	ELSE
	340	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	341	rayleigh_damping_factor
	342	ENDIF
[1]	343	ENDIF
[940]	344	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	345	IF ( humidity ) THEN
[1]	346	IF ( .NOT. cloud_physics ) THEN
	347	WRITE ( io, 129 )
	348	ELSE
	349	WRITE ( io, 130 )
	350	ENDIF
	351	ENDIF
	352	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	353	IF ( conserve_volume_flow ) THEN
[241]	354	WRITE ( io, 150 ) conserve_volume_flow_mode
	355	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	356	WRITE ( io, 151 ) u_bulk, v_bulk
	357	ENDIF
[240]	358	ELSEIF ( dp_external ) THEN
	359	IF ( dp_smooth ) THEN
[241]	360	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	361	ELSE
[241]	362	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	363	ENDIF
	364	ENDIF
[411]	365	IF ( large_scale_subsidence ) THEN
	366	WRITE ( io, 153 )
	367	WRITE ( io, 154 )
	368	ENDIF
[1]	369	WRITE ( io, 99 )
	370
	371	!
	372	!-- Runtime and timestep informations
	373	WRITE ( io, 200 )
	374	IF ( .NOT. dt_fixed ) THEN
	375	WRITE ( io, 201 ) dt_max, cfl_factor
	376	ELSE
	377	WRITE ( io, 202 ) dt
	378	ENDIF
	379	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	380
	381	IF ( time_restart /= 9999999.9 .AND. &
	382	simulated_time_at_begin == simulated_time ) THEN
	383	IF ( dt_restart == 9999999.9 ) THEN
	384	WRITE ( io, 204 ) ' Restart at: ',time_restart
	385	ELSE
	386	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	387	ENDIF
	388	ENDIF
	389
	390	IF ( simulated_time_at_begin /= simulated_time ) THEN
	391	i = MAX ( log_point_s(10)%counts, 1 )
	392	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	393	cpuseconds_per_simulated_second = 0.0
	394	ELSE
	395	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	396	( simulated_time - &
	397	simulated_time_at_begin )
	398	ENDIF
	399	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	400	log_point_s(10)%sum / REAL( i ), &
	401	cpuseconds_per_simulated_second
	402	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	403	IF ( dt_restart == 9999999.9 ) THEN
	404	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	405	ELSE
	406	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	407	ENDIF
	408	ENDIF
	409	ENDIF
	410
	411	!
[291]	412	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	413	!-- and ocean are used. In this case, coupling_start_time defines the time
	414	!-- when the coupling is switched on.
	415	IF ( coupling_start_time /= 0.0 ) THEN
	416	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	417	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	418	ELSE
	419	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	420	'precursor runs'
	421	ENDIF
	422	WRITE ( io, 207 ) char1, coupling_start_time
	423	ENDIF
	424
	425	!
[1]	426	!-- Computational grid
[94]	427	IF ( .NOT. ocean ) THEN
	428	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	429	IF ( dz_stretch_level_index < nzt+1 ) THEN
	430	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	431	dz_stretch_factor, dz_max
	432	ENDIF
	433	ELSE
	434	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	435	IF ( dz_stretch_level_index > 0 ) THEN
	436	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	437	dz_stretch_factor, dz_max
	438	ENDIF
[1]	439	ENDIF
	440	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	441	MIN( nnz+2, nzt+2 )
	442	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	443
	444	!
	445	!-- Topography
	446	WRITE ( io, 270 ) topography
	447	SELECT CASE ( TRIM( topography ) )
	448
	449	CASE ( 'flat' )
	450	! no actions necessary
	451
	452	CASE ( 'single_building' )
	453	blx = INT( building_length_x / dx )
	454	bly = INT( building_length_y / dy )
	455	bh = INT( building_height / dz )
	456
	457	IF ( building_wall_left == 9999999.9 ) THEN
	458	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	459	ENDIF
	460	bxl = INT ( building_wall_left / dx + 0.5 )
	461	bxr = bxl + blx
	462
	463	IF ( building_wall_south == 9999999.9 ) THEN
	464	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	465	ENDIF
	466	bys = INT ( building_wall_south / dy + 0.5 )
	467	byn = bys + bly
	468
	469	WRITE ( io, 271 ) building_length_x, building_length_y, &
	470	building_height, bxl, bxr, bys, byn
	471
[240]	472	CASE ( 'single_street_canyon' )
	473	ch = NINT( canyon_height / dz )
	474	IF ( canyon_width_x /= 9999999.9 ) THEN
	475	!
	476	!-- Street canyon in y direction
	477	cwx = NINT( canyon_width_x / dx )
	478	IF ( canyon_wall_left == 9999999.9 ) THEN
	479	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	480	ENDIF
	481	cxl = NINT( canyon_wall_left / dx )
	482	cxr = cxl + cwx
	483	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	484
	485	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	486	!
	487	!-- Street canyon in x direction
	488	cwy = NINT( canyon_width_y / dy )
	489	IF ( canyon_wall_south == 9999999.9 ) THEN
	490	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	491	ENDIF
	492	cys = NINT( canyon_wall_south / dy )
	493	cyn = cys + cwy
	494	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	495	ENDIF
	496
[1]	497	END SELECT
	498
[256]	499	IF ( TRIM( topography ) /= 'flat' ) THEN
	500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	501	IF ( TRIM( topography ) == 'single_building' .OR. &
	502	TRIM( topography ) == 'single_street_canyon' ) THEN
	503	WRITE ( io, 278 )
	504	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	505	WRITE ( io, 279 )
	506	ENDIF
	507	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	508	WRITE ( io, 278 )
	509	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	510	WRITE ( io, 279 )
	511	ENDIF
	512	ENDIF
	513
[138]	514	IF ( plant_canopy ) THEN
	515
	516	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	517	IF ( passive_scalar ) THEN
	518	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	519	leaf_surface_concentration
	520	ENDIF
[138]	521
[1]	522	!
[153]	523	!-- Heat flux at the top of vegetation
	524	WRITE ( io, 282 ) cthf
	525
	526	!
[138]	527	!-- Leaf area density profile
	528	!-- Building output strings, starting with surface value
[833]	529	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	530	gradients = '------'
	531	slices = ' 0'
	532	coordinates = ' 0.0'
	533	i = 1
	534	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	535
	536	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	537	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	538
	539	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	540	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	541
	542	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	543	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	544
	545	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	546	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	547
	548	i = i + 1
	549	ENDDO
	550
[153]	551	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	552	TRIM( gradients ), TRIM( slices )
	553
	554	ENDIF
	555
	556	!
[1]	557	!-- Boundary conditions
	558	IF ( ibc_p_b == 0 ) THEN
	559	runten = 'p(0) = 0 \|'
	560	ELSEIF ( ibc_p_b == 1 ) THEN
	561	runten = 'p(0) = p(1) \|'
	562	ELSE
	563	runten = 'p(0) = p(1) +R\|'
	564	ENDIF
	565	IF ( ibc_p_t == 0 ) THEN
	566	roben = 'p(nzt+1) = 0 \|'
	567	ELSE
	568	roben = 'p(nzt+1) = p(nzt) \|'
	569	ENDIF
	570
	571	IF ( ibc_uv_b == 0 ) THEN
	572	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	573	ELSE
	574	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	575	ENDIF
[132]	576	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	577	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	578	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	579	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	580	ELSE
	581	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	582	ENDIF
	583
	584	IF ( ibc_pt_b == 0 ) THEN
	585	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	586	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	587	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	588	ELSEIF ( ibc_pt_b == 2 ) THEN
	589	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	590	ENDIF
	591	IF ( ibc_pt_t == 0 ) THEN
[19]	592	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	593	ELSEIF( ibc_pt_t == 1 ) THEN
	594	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	595	ELSEIF( ibc_pt_t == 2 ) THEN
	596	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	597
[1]	598	ENDIF
	599
	600	WRITE ( io, 300 ) runten, roben
	601
	602	IF ( .NOT. constant_diffusion ) THEN
	603	IF ( ibc_e_b == 1 ) THEN
	604	runten = 'e(0) = e(1)'
	605	ELSE
	606	runten = 'e(0) = e(1) = (u/0.1)*2'
	607	ENDIF
	608	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	609
[97]	610	WRITE ( io, 301 ) 'e', runten, roben
[1]	611
	612	ENDIF
	613
[97]	614	IF ( ocean ) THEN
	615	runten = 'sa(0) = sa(1)'
	616	IF ( ibc_sa_t == 0 ) THEN
	617	roben = 'sa(nzt+1) = sa_surface'
[1]	618	ELSE
[97]	619	roben = 'sa(nzt+1) = sa(nzt)'
[1]	620	ENDIF
[97]	621	WRITE ( io, 301 ) 'sa', runten, roben
	622	ENDIF
[1]	623
[97]	624	IF ( humidity ) THEN
	625	IF ( ibc_q_b == 0 ) THEN
	626	runten = 'q(0) = q_surface'
	627	ELSE
	628	runten = 'q(0) = q(1)'
	629	ENDIF
	630	IF ( ibc_q_t == 0 ) THEN
	631	roben = 'q(nzt) = q_top'
	632	ELSE
	633	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	634	ENDIF
	635	WRITE ( io, 301 ) 'q', runten, roben
	636	ENDIF
[1]	637
[97]	638	IF ( passive_scalar ) THEN
	639	IF ( ibc_q_b == 0 ) THEN
	640	runten = 's(0) = s_surface'
	641	ELSE
	642	runten = 's(0) = s(1)'
	643	ENDIF
	644	IF ( ibc_q_t == 0 ) THEN
	645	roben = 's(nzt) = s_top'
	646	ELSE
	647	roben = 's(nzt) = s(nzt-1) + ds/dz'
	648	ENDIF
	649	WRITE ( io, 301 ) 's', runten, roben
[1]	650	ENDIF
	651
	652	IF ( use_surface_fluxes ) THEN
	653	WRITE ( io, 303 )
	654	IF ( constant_heatflux ) THEN
	655	WRITE ( io, 306 ) surface_heatflux
	656	IF ( random_heatflux ) WRITE ( io, 307 )
	657	ENDIF
[75]	658	IF ( humidity .AND. constant_waterflux ) THEN
[1]	659	WRITE ( io, 311 ) surface_waterflux
	660	ENDIF
	661	IF ( passive_scalar .AND. constant_waterflux ) THEN
	662	WRITE ( io, 313 ) surface_waterflux
	663	ENDIF
	664	ENDIF
	665
[19]	666	IF ( use_top_fluxes ) THEN
	667	WRITE ( io, 304 )
[102]	668	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	669	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	670	IF ( constant_top_heatflux ) THEN
	671	WRITE ( io, 306 ) top_heatflux
	672	ENDIF
	673	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	674	WRITE ( io, 316 )
[19]	675	ENDIF
[97]	676	IF ( ocean .AND. constant_top_salinityflux ) THEN
	677	WRITE ( io, 309 ) top_salinityflux
	678	ENDIF
[75]	679	IF ( humidity .OR. passive_scalar ) THEN
[19]	680	WRITE ( io, 315 )
	681	ENDIF
	682	ENDIF
	683
[1]	684	IF ( prandtl_layer ) THEN
[978]	685	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	686	z0h_factor*roughness_length, kappa, &
[94]	687	rif_min, rif_max
[1]	688	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	689	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	690	WRITE ( io, 312 )
	691	ENDIF
	692	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	693	WRITE ( io, 314 )
	694	ENDIF
	695	ELSE
	696	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	697	WRITE ( io, 310 ) rif_min, rif_max
	698	ENDIF
	699	ENDIF
	700
	701	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	702	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[978]	703	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
[151]	704	IF ( turbulent_inflow ) THEN
	705	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	706	inflow_damping_height, inflow_damping_width
	707	ENDIF
[1]	708	ENDIF
	709
	710	!
	711	!-- Listing of 1D-profiles
[151]	712	WRITE ( io, 325 ) dt_dopr_listing
[1]	713	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	714	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	715	ENDIF
	716
	717	!
	718	!-- DATA output
	719	WRITE ( io, 330 )
	720	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	721	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	722	ENDIF
	723
	724	!
	725	!-- 1D-profiles
[346]	726	dopr_chr = 'Profile:'
[1]	727	IF ( dopr_n /= 0 ) THEN
	728	WRITE ( io, 331 )
	729
	730	output_format = ''
	731	IF ( netcdf_output ) THEN
[1031]	732	output_format = output_format_netcdf
[1]	733	ENDIF
[292]	734	WRITE ( io, 344 ) output_format
[1]	735
	736	DO i = 1, dopr_n
	737	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	738	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	739	WRITE ( io, 332 ) dopr_chr
	740	dopr_chr = ' :'
	741	ENDIF
	742	ENDDO
	743
	744	IF ( dopr_chr /= '' ) THEN
	745	WRITE ( io, 332 ) dopr_chr
	746	ENDIF
	747	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	748	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	749	ENDIF
	750
	751	!
	752	!-- 2D-arrays
	753	DO av = 0, 1
	754
	755	i = 1
	756	do2d_xy = ''
	757	do2d_xz = ''
	758	do2d_yz = ''
	759	DO WHILE ( do2d(av,i) /= ' ' )
	760
	761	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	762	do2d_mode = do2d(av,i)(l-1:l)
	763
	764	SELECT CASE ( do2d_mode )
	765	CASE ( 'xy' )
	766	ll = LEN_TRIM( do2d_xy )
	767	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	768	CASE ( 'xz' )
	769	ll = LEN_TRIM( do2d_xz )
	770	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	771	CASE ( 'yz' )
	772	ll = LEN_TRIM( do2d_yz )
	773	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	774	END SELECT
	775
	776	i = i + 1
	777
	778	ENDDO
	779
	780	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	781	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	782	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	783	( netcdf_output .OR. iso2d_output ) ) THEN
	784
	785	IF ( av == 0 ) THEN
	786	WRITE ( io, 334 ) ''
	787	ELSE
	788	WRITE ( io, 334 ) '(time-averaged)'
	789	ENDIF
	790
	791	IF ( do2d_at_begin ) THEN
	792	begin_chr = 'and at the start'
	793	ELSE
	794	begin_chr = ''
	795	ENDIF
	796
	797	output_format = ''
	798	IF ( netcdf_output ) THEN
[1031]	799	output_format = output_format_netcdf
[1]	800	ENDIF
	801	IF ( iso2d_output ) THEN
	802	IF ( netcdf_output ) THEN
[1031]	803	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
[1]	804	ELSE
	805	output_format = 'iso2d'
	806	ENDIF
	807	ENDIF
[292]	808	WRITE ( io, 344 ) output_format
[1]	809
	810	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	811	i = 1
	812	slices = '/'
	813	coordinates = '/'
	814	!
	815	!-- Building strings with index and coordinate informations of the
	816	!-- slices
	817	DO WHILE ( section(i,1) /= -9999 )
	818
	819	WRITE (section_chr,'(I5)') section(i,1)
	820	section_chr = ADJUSTL( section_chr )
	821	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	822
[206]	823	IF ( section(i,1) == -1 ) THEN
	824	WRITE (coor_chr,'(F10.1)') -1.0
	825	ELSE
	826	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	827	ENDIF
[1]	828	coor_chr = ADJUSTL( coor_chr )
	829	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	830
	831	i = i + 1
	832	ENDDO
	833	IF ( av == 0 ) THEN
	834	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	835	TRIM( begin_chr ), 'k', TRIM( slices ), &
	836	TRIM( coordinates )
	837	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	838	WRITE ( io, 339 ) skip_time_do2d_xy
	839	ENDIF
	840	ELSE
	841	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	842	TRIM( begin_chr ), averaging_interval, &
	843	dt_averaging_input, 'k', TRIM( slices ), &
	844	TRIM( coordinates )
	845	IF ( skip_time_data_output_av /= 0.0 ) THEN
	846	WRITE ( io, 339 ) skip_time_data_output_av
	847	ENDIF
	848	ENDIF
	849
	850	ENDIF
	851
	852	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	853	i = 1
	854	slices = '/'
	855	coordinates = '/'
	856	!
	857	!-- Building strings with index and coordinate informations of the
	858	!-- slices
	859	DO WHILE ( section(i,2) /= -9999 )
	860
	861	WRITE (section_chr,'(I5)') section(i,2)
	862	section_chr = ADJUSTL( section_chr )
	863	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	864
	865	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	866	coor_chr = ADJUSTL( coor_chr )
	867	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	868
	869	i = i + 1
	870	ENDDO
	871	IF ( av == 0 ) THEN
	872	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	873	TRIM( begin_chr ), 'j', TRIM( slices ), &
	874	TRIM( coordinates )
	875	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	876	WRITE ( io, 339 ) skip_time_do2d_xz
	877	ENDIF
	878	ELSE
	879	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	880	TRIM( begin_chr ), averaging_interval, &
	881	dt_averaging_input, 'j', TRIM( slices ), &
	882	TRIM( coordinates )
	883	IF ( skip_time_data_output_av /= 0.0 ) THEN
	884	WRITE ( io, 339 ) skip_time_data_output_av
	885	ENDIF
	886	ENDIF
	887	ENDIF
	888
	889	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	890	i = 1
	891	slices = '/'
	892	coordinates = '/'
	893	!
	894	!-- Building strings with index and coordinate informations of the
	895	!-- slices
	896	DO WHILE ( section(i,3) /= -9999 )
	897
	898	WRITE (section_chr,'(I5)') section(i,3)
	899	section_chr = ADJUSTL( section_chr )
	900	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	901
	902	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	903	coor_chr = ADJUSTL( coor_chr )
	904	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	905
	906	i = i + 1
	907	ENDDO
	908	IF ( av == 0 ) THEN
	909	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	910	TRIM( begin_chr ), 'i', TRIM( slices ), &
	911	TRIM( coordinates )
	912	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	913	WRITE ( io, 339 ) skip_time_do2d_yz
	914	ENDIF
	915	ELSE
	916	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	917	TRIM( begin_chr ), averaging_interval, &
	918	dt_averaging_input, 'i', TRIM( slices ), &
	919	TRIM( coordinates )
	920	IF ( skip_time_data_output_av /= 0.0 ) THEN
	921	WRITE ( io, 339 ) skip_time_data_output_av
	922	ENDIF
	923	ENDIF
	924	ENDIF
	925
	926	ENDIF
	927
	928	ENDDO
	929
	930	!
	931	!-- 3d-arrays
	932	DO av = 0, 1
	933
	934	i = 1
	935	do3d_chr = ''
	936	DO WHILE ( do3d(av,i) /= ' ' )
	937
	938	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	939	i = i + 1
	940
	941	ENDDO
	942
	943	IF ( do3d_chr /= '' ) THEN
	944	IF ( av == 0 ) THEN
	945	WRITE ( io, 336 ) ''
	946	ELSE
	947	WRITE ( io, 336 ) '(time-averaged)'
	948	ENDIF
	949
	950	output_format = ''
	951	IF ( netcdf_output ) THEN
[1031]	952	output_format = output_format_netcdf
[1]	953	ENDIF
	954	IF ( avs_output ) THEN
	955	IF ( netcdf_output ) THEN
[1031]	956	output_format = TRIM( output_format_netcdf ) // ' and avs'
[1]	957	ELSE
	958	output_format = 'avs'
	959	ENDIF
	960	ENDIF
[292]	961	WRITE ( io, 344 ) output_format
[1]	962
	963	IF ( do3d_at_begin ) THEN
	964	begin_chr = 'and at the start'
	965	ELSE
	966	begin_chr = ''
	967	ENDIF
	968	IF ( av == 0 ) THEN
	969	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	970	zu(nz_do3d), nz_do3d
	971	ELSE
	972	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	973	TRIM( begin_chr ), averaging_interval, &
	974	dt_averaging_input, zu(nz_do3d), nz_do3d
	975	ENDIF
	976
	977	IF ( do3d_compress ) THEN
	978	do3d_chr = ''
	979	i = 1
	980	DO WHILE ( do3d(av,i) /= ' ' )
	981
	982	SELECT CASE ( do3d(av,i) )
	983	CASE ( 'u' )
	984	j = 1
	985	CASE ( 'v' )
	986	j = 2
	987	CASE ( 'w' )
	988	j = 3
	989	CASE ( 'p' )
	990	j = 4
	991	CASE ( 'pt' )
	992	j = 5
	993	END SELECT
	994	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	995	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	996	':' // prec // ','
	997	i = i + 1
	998
	999	ENDDO
	1000	WRITE ( io, 338 ) do3d_chr
	1001
	1002	ENDIF
	1003
	1004	IF ( av == 0 ) THEN
	1005	IF ( skip_time_do3d /= 0.0 ) THEN
	1006	WRITE ( io, 339 ) skip_time_do3d
	1007	ENDIF
	1008	ELSE
	1009	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1010	WRITE ( io, 339 ) skip_time_data_output_av
	1011	ENDIF
	1012	ENDIF
	1013
	1014	ENDIF
	1015
	1016	ENDDO
	1017
	1018	!
[410]	1019	!-- masked arrays
	1020	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1021	mask_scale_x, mask_scale_y, mask_scale_z
	1022	DO mid = 1, masks
	1023	DO av = 0, 1
	1024
	1025	i = 1
	1026	domask_chr = ''
	1027	DO WHILE ( domask(mid,av,i) /= ' ' )
	1028	domask_chr = TRIM( domask_chr ) // ' ' // &
	1029	TRIM( domask(mid,av,i) ) // ','
	1030	i = i + 1
	1031	ENDDO
	1032
	1033	IF ( domask_chr /= '' ) THEN
	1034	IF ( av == 0 ) THEN
	1035	WRITE ( io, 346 ) '', mid
	1036	ELSE
	1037	WRITE ( io, 346 ) ' (time-averaged)', mid
	1038	ENDIF
	1039
[1031]	1040	output_format = ' '
[410]	1041	IF ( netcdf_output ) THEN
[1031]	1042	output_format = output_format_netcdf
[410]	1043	ENDIF
	1044	WRITE ( io, 344 ) output_format
	1045
	1046	IF ( av == 0 ) THEN
	1047	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1048	ELSE
	1049	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1050	averaging_interval, dt_averaging_input
	1051	ENDIF
	1052
	1053	IF ( av == 0 ) THEN
	1054	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1055	WRITE ( io, 339 ) skip_time_domask(mid)
	1056	ENDIF
	1057	ELSE
	1058	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1059	WRITE ( io, 339 ) skip_time_data_output_av
	1060	ENDIF
	1061	ENDIF
	1062	!
	1063	!-- output locations
	1064	DO dim = 1, 3
	1065	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1066	count = 0
	1067	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1068	count = count + 1
	1069	ENDDO
	1070	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1071	mask(mid,dim,:count)
	1072	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1073	mask_loop(mid,dim,2) < 0.0 .AND. &
	1074	mask_loop(mid,dim,3) == 0.0 ) THEN
	1075	WRITE ( io, 350 ) dir(dim), dir(dim)
	1076	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1077	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1078	mask_loop(mid,dim,1:2)
	1079	ELSE
	1080	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1081	mask_loop(mid,dim,1:3)
	1082	ENDIF
	1083	ENDDO
	1084	ENDIF
	1085
	1086	ENDDO
	1087	ENDDO
	1088
	1089	!
[1]	1090	!-- Timeseries
	1091	IF ( dt_dots /= 9999999.9 ) THEN
	1092	WRITE ( io, 340 )
	1093
	1094	output_format = ''
	1095	IF ( netcdf_output ) THEN
[1031]	1096	output_format = output_format_netcdf
[1]	1097	ENDIF
[292]	1098	WRITE ( io, 344 ) output_format
[1]	1099	WRITE ( io, 341 ) dt_dots
	1100	ENDIF
	1101
	1102	#if defined( __dvrp_graphics )
	1103	!
	1104	!-- Dvrp-output
	1105	IF ( dt_dvrp /= 9999999.9 ) THEN
	1106	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1107	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1108	i = 1
	1109	l = 0
[336]	1110	m = 0
[1]	1111	DO WHILE ( mode_dvrp(i) /= ' ' )
	1112	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1113	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1114	l = l + 1
	1115	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1116	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1117	isosurface_color(:,l)
[1]	1118	ENDIF
	1119	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1120	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1121	m = m + 1
	1122	IF ( do2d(0,j) /= ' ' ) THEN
	1123	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1124	slicer_range_limits_dvrp(:,m)
	1125	ENDIF
[1]	1126	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1127	WRITE ( io, 363 ) dvrp_psize
	1128	IF ( particle_dvrpsize /= 'none' ) THEN
	1129	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1130	dvrpsize_interval
	1131	ENDIF
	1132	IF ( particle_color /= 'none' ) THEN
	1133	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1134	color_interval
	1135	ENDIF
[1]	1136	ENDIF
	1137	i = i + 1
	1138	ENDDO
[237]	1139
[336]	1140	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1141	superelevation_y, superelevation, clip_dvrp_l, &
	1142	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1143
	1144	IF ( TRIM( topography ) /= 'flat' ) THEN
	1145	WRITE ( io, 366 ) topography_color
	1146	IF ( cluster_size > 1 ) THEN
	1147	WRITE ( io, 367 ) cluster_size
	1148	ENDIF
[237]	1149	ENDIF
	1150
[1]	1151	ENDIF
	1152	#endif
	1153
	1154	#if defined( __spectra )
	1155	!
	1156	!-- Spectra output
	1157	IF ( dt_dosp /= 9999999.9 ) THEN
	1158	WRITE ( io, 370 )
	1159
[1031]	1160	output_format = ' '
[1]	1161	IF ( netcdf_output ) THEN
[1031]	1162	output_format = output_format_netcdf
[1]	1163	ENDIF
[292]	1164	WRITE ( io, 344 ) output_format
[1]	1165	WRITE ( io, 371 ) dt_dosp
	1166	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1167	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1168	( spectra_direction(i), i = 1,10 ), &
[189]	1169	( comp_spectra_level(i), i = 1,100 ), &
	1170	( plot_spectra_level(i), i = 1,100 ), &
[1]	1171	averaging_interval_sp, dt_averaging_input_pr
	1172	ENDIF
	1173	#endif
	1174
	1175	WRITE ( io, 99 )
	1176
	1177	!
	1178	!-- Physical quantities
	1179	WRITE ( io, 400 )
	1180
	1181	!
	1182	!-- Geostrophic parameters
	1183	WRITE ( io, 410 ) omega, phi, f, fs
	1184
	1185	!
	1186	!-- Other quantities
	1187	WRITE ( io, 411 ) g
[97]	1188	IF ( use_reference ) THEN
	1189	IF ( ocean ) THEN
	1190	WRITE ( io, 412 ) prho_reference
	1191	ELSE
	1192	WRITE ( io, 413 ) pt_reference
	1193	ENDIF
	1194	ENDIF
[1]	1195
	1196	!
	1197	!-- Cloud physics parameters
	1198	IF ( cloud_physics ) THEN
[57]	1199	WRITE ( io, 415 )
	1200	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1201	ENDIF
	1202
	1203	!-- Profile of the geostrophic wind (component ug)
	1204	!-- Building output strings
	1205	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1206	gradients = '------'
	1207	slices = ' 0'
	1208	coordinates = ' 0.0'
	1209	i = 1
	1210	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1211
[167]	1212	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1213	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1214
[167]	1215	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1216	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1217
[167]	1218	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1219	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1220
[167]	1221	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1222	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1223
[430]	1224	IF ( i == 10 ) THEN
	1225	EXIT
	1226	ELSE
	1227	i = i + 1
	1228	ENDIF
	1229
[1]	1230	ENDDO
	1231
	1232	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1233	TRIM( gradients ), TRIM( slices )
	1234
	1235	!-- Profile of the geostrophic wind (component vg)
	1236	!-- Building output strings
	1237	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1238	gradients = '------'
	1239	slices = ' 0'
	1240	coordinates = ' 0.0'
	1241	i = 1
	1242	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1243
[167]	1244	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1245	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1246
[167]	1247	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1248	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1249
[167]	1250	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1251	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1254	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1255
[430]	1256	IF ( i == 10 ) THEN
	1257	EXIT
	1258	ELSE
	1259	i = i + 1
	1260	ENDIF
	1261
[1]	1262	ENDDO
	1263
	1264	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1265	TRIM( gradients ), TRIM( slices )
	1266
	1267	!
[767]	1268	!-- Initial wind profiles
	1269	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1270
	1271	!
[1]	1272	!-- Initial temperature profile
	1273	!-- Building output strings, starting with surface temperature
	1274	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1275	gradients = '------'
	1276	slices = ' 0'
	1277	coordinates = ' 0.0'
	1278	i = 1
	1279	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1280
[94]	1281	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1282	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1283
[94]	1284	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1285	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1286
[94]	1287	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1288	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1289
[94]	1290	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1291	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1292
[430]	1293	IF ( i == 10 ) THEN
	1294	EXIT
	1295	ELSE
	1296	i = i + 1
	1297	ENDIF
	1298
[1]	1299	ENDDO
	1300
	1301	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1302	TRIM( gradients ), TRIM( slices )
	1303
	1304	!
	1305	!-- Initial humidity profile
	1306	!-- Building output strings, starting with surface humidity
[75]	1307	IF ( humidity .OR. passive_scalar ) THEN
[1]	1308	WRITE ( temperatures, '(E8.1)' ) q_surface
	1309	gradients = '--------'
	1310	slices = ' 0'
	1311	coordinates = ' 0.0'
	1312	i = 1
	1313	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1314
	1315	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1316	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1317
	1318	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1319	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1320
	1321	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1322	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1323
	1324	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1325	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1326
[430]	1327	IF ( i == 10 ) THEN
	1328	EXIT
	1329	ELSE
	1330	i = i + 1
	1331	ENDIF
	1332
[1]	1333	ENDDO
	1334
[75]	1335	IF ( humidity ) THEN
[1]	1336	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1337	TRIM( gradients ), TRIM( slices )
	1338	ELSE
	1339	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1340	TRIM( gradients ), TRIM( slices )
	1341	ENDIF
	1342	ENDIF
	1343
	1344	!
[97]	1345	!-- Initial salinity profile
	1346	!-- Building output strings, starting with surface salinity
	1347	IF ( ocean ) THEN
	1348	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1349	gradients = '------'
	1350	slices = ' 0'
	1351	coordinates = ' 0.0'
	1352	i = 1
	1353	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1354
	1355	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1356	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1357
	1358	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1359	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1360
	1361	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1362	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1363
	1364	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1365	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1366
[430]	1367	IF ( i == 10 ) THEN
	1368	EXIT
	1369	ELSE
	1370	i = i + 1
	1371	ENDIF
	1372
[97]	1373	ENDDO
	1374
	1375	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1376	TRIM( gradients ), TRIM( slices )
	1377	ENDIF
	1378
	1379	!
[411]	1380	!-- Profile for the large scale vertial velocity
	1381	!-- Building output strings, starting with surface value
	1382	IF ( large_scale_subsidence ) THEN
	1383	temperatures = ' 0.0'
	1384	gradients = '------'
	1385	slices = ' 0'
	1386	coordinates = ' 0.0'
	1387	i = 1
[580]	1388	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1389
	1390	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1391	w_subs(subs_vertical_gradient_level_i(i))
[411]	1392	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1393
[580]	1394	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1395	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1396
[580]	1397	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1398	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1399
[580]	1400	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1401	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1402
[430]	1403	IF ( i == 10 ) THEN
	1404	EXIT
	1405	ELSE
	1406	i = i + 1
	1407	ENDIF
	1408
[411]	1409	ENDDO
	1410
	1411	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1412	TRIM( gradients ), TRIM( slices )
	1413	ENDIF
	1414
	1415	!
[824]	1416	!-- Cloud physcis parameters / quantities / numerical methods
	1417	WRITE ( io, 430 )
	1418	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1419	WRITE ( io, 431 )
	1420	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1421	WRITE ( io, 432 )
	1422	IF ( radiation ) WRITE ( io, 132 )
	1423	IF ( precipitation ) WRITE ( io, 133 )
	1424	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1425	WRITE ( io, 433 )
	1426	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1427	IF ( collision_kernel /= 'none' ) THEN
	1428	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1429	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1430	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1431	ENDIF
[825]	1432	ELSE
[828]	1433	WRITE ( io, 437 )
[825]	1434	ENDIF
[824]	1435	ENDIF
	1436
	1437	!
[1]	1438	!-- LES / turbulence parameters
	1439	WRITE ( io, 450 )
	1440
	1441	!--
	1442	! ... LES-constants used must still be added here
	1443	!--
	1444	IF ( constant_diffusion ) THEN
	1445	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1446	prandtl_number
	1447	ENDIF
	1448	IF ( .NOT. constant_diffusion) THEN
[108]	1449	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1450	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1451	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1452	ENDIF
	1453
	1454	!
	1455	!-- Special actions during the run
	1456	WRITE ( io, 470 )
	1457	IF ( create_disturbances ) THEN
	1458	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1459	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1460	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1461	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1462	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1463	ELSE
	1464	WRITE ( io, 473 ) disturbance_energy_limit
	1465	ENDIF
	1466	WRITE ( io, 474 ) TRIM( random_generator )
	1467	ENDIF
	1468	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1469	WRITE ( io, 475 ) pt_surface_initial_change
	1470	ENDIF
[75]	1471	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1472	WRITE ( io, 476 ) q_surface_initial_change
	1473	ENDIF
	1474	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1475	WRITE ( io, 477 ) q_surface_initial_change
	1476	ENDIF
	1477
[60]	1478	IF ( particle_advection ) THEN
[1]	1479	!
[60]	1480	!-- Particle attributes
	1481	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1482	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1483	end_time_prel, dt_sort_particles
[60]	1484	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1485	IF ( random_start_position ) WRITE ( io, 481 )
	1486	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1487	WRITE ( io, 495 ) total_number_of_particles
[824]	1488	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1489	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1490	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1491	WRITE ( io, 484 ) total_number_of_tails, &
	1492	minimum_tailpoint_distance, &
	1493	maximum_tailpoint_age
	1494	ENDIF
[1]	1495	ENDIF
[60]	1496	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1497	WRITE ( io, 485 ) dt_write_particle_data
[1031]	1498	output_format = ' '
[60]	1499	IF ( netcdf_output ) THEN
[493]	1500	IF ( netcdf_data_format > 1 ) THEN
[60]	1501	output_format = 'netcdf (64 bit offset) and binary'
	1502	ELSE
	1503	output_format = 'netcdf and binary'
	1504	ENDIF
[1]	1505	ELSE
[60]	1506	output_format = 'binary'
[1]	1507	ENDIF
[292]	1508	WRITE ( io, 344 ) output_format
[1]	1509	ENDIF
[60]	1510	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1511	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1512
[60]	1513	WRITE ( io, 487 ) number_of_particle_groups
[1]	1514
[60]	1515	DO i = 1, number_of_particle_groups
	1516	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1517	WRITE ( io, 490 ) i, 0.0
	1518	WRITE ( io, 492 )
[1]	1519	ELSE
[60]	1520	WRITE ( io, 490 ) i, radius(i)
	1521	IF ( density_ratio(i) /= 0.0 ) THEN
	1522	WRITE ( io, 491 ) density_ratio(i)
	1523	ELSE
	1524	WRITE ( io, 492 )
	1525	ENDIF
[1]	1526	ENDIF
[60]	1527	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1528	pdx(i), pdy(i), pdz(i)
[336]	1529	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1530	ENDDO
[1]	1531
[60]	1532	ENDIF
[1]	1533
[60]	1534
[1]	1535	!
	1536	!-- Parameters of 1D-model
	1537	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1538	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1539	mixing_length_1d, dissipation_1d
	1540	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1541	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1542	ENDIF
	1543	ENDIF
	1544
	1545	!
	1546	!-- User-defined informations
	1547	CALL user_header( io )
	1548
	1549	WRITE ( io, 99 )
	1550
	1551	!
	1552	!-- Write buffer contents to disc immediately
[82]	1553	CALL local_flush( io )
[1]	1554
	1555	!
	1556	!-- Here the FORMATs start
	1557
	1558	99 FORMAT (1X,78('-'))
[200]	1559	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1560	1X,'* ',A,' *',9X,A/ &
	1561	1X,'***************************',9X,42('-'))
[291]	1562	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1563	37X,42('-'))
[200]	1564	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1565	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1566	' Run on host: ',A10)
[1]	1567	#if defined( __parallel )
[200]	1568	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1569	')',1X,A)
[200]	1570	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1571	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1572	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1573	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1574	37X,'because the job is running on an SMP-cluster')
[102]	1575	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1576	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1577	#endif
	1578	110 FORMAT (/' Numerical Schemes:'/ &
	1579	' -----------------'/)
	1580	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1581	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1582	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1583	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1584	' or Upstream')
	1585	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1586	' or Upstream')
	1587	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1588	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1589	' Translation velocity = ',A/ &
	1590	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1591	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1592	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1593	' maximum damping coefficient: ',F5.3, ' 1/s')
	1594	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1595	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1596	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1597	F6.2, ' K assumed')
[824]	1598	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1599	' effective emissivity scheme')
[824]	1600	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1601	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1602	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1603	A,'-cycle)'/ &
	1604	' number of grid levels: ',I2/ &
	1605	' Gauss-Seidel red/black iterations: ',I2)
	1606	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1607	I3,')')
	1608	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1609	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1610	I3,')'/ &
	1611	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1612	I3,')')
	1613	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1614	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1615	140 FORMAT (' maximum residual allowed: ',E10.3)
	1616	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1617	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1618	'step')
[87]	1619	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1620	'kinetic energy')
[927]	1621	144 FORMAT (' masking method is used')
[1]	1622	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1623	'conserved'/ &
	1624	' using the ',A,' mode')
	1625	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1626	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1627	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1628	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1629	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1630	'prognostic equation for')
	1631	154 FORMAT (' the potential temperature')
[1]	1632	200 FORMAT (//' Run time and time step information:'/ &
	1633	' ----------------------------------'/)
	1634	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1635	' CFL-factor: ',F4.2)
	1636	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1637	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1638	' End time: ',F9.3,' s')
	1639	204 FORMAT ( A,F9.3,' s')
	1640	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1641	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1642	' CPU-time used: ',F9.3,' s per timestep: ', &
	1643	' ',F9.3,' s'/ &
	1644	' per second of simulated tim', &
	1645	'e: ',F9.3,' s')
[291]	1646	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1647	250 FORMAT (//' Computational grid and domain size:'/ &
	1648	' ----------------------------------'// &
	1649	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1650	' m dz = ',F7.3,' m'/ &
	1651	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1652	' m z(u) = ',F10.3,' m'/)
	1653	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1654	' factor: ',F5.3/ &
	1655	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1656	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1657	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1658	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1659	' degrees')
	1660	270 FORMAT (//' Topography informations:'/ &
	1661	' -----------------------'// &
	1662	1X,'Topography: ',A)
	1663	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1664	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1665	' / ',I4)
[240]	1666	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1667	' direction' / &
	1668	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1669	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1670	278 FORMAT (' Topography grid definition convention:'/ &
	1671	' cell edge (staggered grid points'/ &
	1672	' (u in x-direction, v in y-direction))' /)
	1673	279 FORMAT (' Topography grid definition convention:'/ &
	1674	' cell center (scalar grid points)' /)
[138]	1675	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1676	' ------------------------------'// &
	1677	' Canopy mode: ', A / &
	1678	' Canopy top: ',I4 / &
	1679	' Leaf drag coefficient: ',F6.2 /)
[153]	1680	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1681	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1682	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1683	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1684	' Height: ',A,' m'/ &
	1685	' Leaf area density: ',A,' m2/m3'/ &
	1686	' Gradient: ',A,' m2/m4'/ &
	1687	' Gridpoint: ',A)
	1688
[1]	1689	300 FORMAT (//' Boundary conditions:'/ &
	1690	' -------------------'// &
	1691	' p uv ', &
	1692	' pt'// &
	1693	' B. bound.: ',A/ &
	1694	' T. bound.: ',A)
[97]	1695	301 FORMAT (/' ',A// &
[1]	1696	' B. bound.: ',A/ &
	1697	' T. bound.: ',A)
[19]	1698	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1699	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1700	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1701	'computational u,v-level:'// &
[978]	1702	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
	1703	' m kappa = ',F4.2/ &
[1]	1704	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1705	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1706	307 FORMAT (' Heatflux has a random normal distribution')
	1707	308 FORMAT (' Predefined surface temperature')
[97]	1708	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1709	310 FORMAT (//' 1D-Model:'// &
	1710	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1711	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1712	312 FORMAT (' Predefined surface humidity')
	1713	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1714	314 FORMAT (' Predefined scalar value at the surface')
[19]	1715	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1716	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1717	'atmosphere model')
[1]	1718	317 FORMAT (//' Lateral boundaries:'/ &
	1719	' left/right: ',A/ &
	1720	' north/south: ',A)
[978]	1721	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
	1722	'damping factor = ',F6.4)
[151]	1723	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1724	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1725	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1726	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1727	' v: ',F9.6,' m2/s2')
[151]	1728	325 FORMAT (//' List output:'/ &
[1]	1729	' -----------'// &
	1730	' 1D-Profiles:'/ &
	1731	' Output every ',F8.2,' s')
[151]	1732	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1733	' Averaging input every ',F8.2,' s')
	1734	330 FORMAT (//' Data output:'/ &
	1735	' -----------'/)
	1736	331 FORMAT (/' 1D-Profiles:')
	1737	332 FORMAT (/' ',A)
	1738	333 FORMAT (' Output every ',F8.2,' s',/ &
	1739	' Time averaged over ',F8.2,' s'/ &
	1740	' Averaging input every ',F8.2,' s')
	1741	334 FORMAT (/' 2D-Arrays',A,':')
	1742	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1743	' Output every ',F8.2,' s ',A/ &
	1744	' Cross sections at ',A1,' = ',A/ &
	1745	' scalar-coordinates: ',A,' m'/)
	1746	336 FORMAT (/' 3D-Arrays',A,':')
	1747	337 FORMAT (/' Arrays: ',A/ &
	1748	' Output every ',F8.2,' s ',A/ &
	1749	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1750	338 FORMAT (' Compressed data output'/ &
	1751	' Decimal precision: ',A/)
	1752	339 FORMAT (' No output during initial ',F8.2,' s')
	1753	340 FORMAT (/' Time series:')
	1754	341 FORMAT (' Output every ',F8.2,' s'/)
	1755	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1756	' Output every ',F8.2,' s ',A/ &
	1757	' Time averaged over ',F8.2,' s'/ &
	1758	' Averaging input every ',F8.2,' s'/ &
	1759	' Cross sections at ',A1,' = ',A/ &
	1760	' scalar-coordinates: ',A,' m'/)
	1761	343 FORMAT (/' Arrays: ',A/ &
	1762	' Output every ',F8.2,' s ',A/ &
	1763	' Time averaged over ',F8.2,' s'/ &
	1764	' Averaging input every ',F8.2,' s'/ &
	1765	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1766	344 FORMAT (' Output format: ',A/)
[410]	1767	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1768	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1769	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1770	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1771	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1772	347 FORMAT (' Variables: ',A/ &
	1773	' Output every ',F8.2,' s')
	1774	348 FORMAT (' Variables: ',A/ &
	1775	' Output every ',F8.2,' s'/ &
	1776	' Time averaged over ',F8.2,' s'/ &
	1777	' Averaging input every ',F8.2,' s')
	1778	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1779	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1780	13(' ',8(F8.2,',')/) )
	1781	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1782	'all gridpoints along ',A,'-direction (default).' )
	1783	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1784	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1785	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1786	#if defined( __dvrp_graphics )
	1787	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1788	' Output every ',F7.1,' s'/ &
	1789	' Output mode: ',A/ &
	1790	' Host / User: ',A,' / ',A/ &
	1791	' Directory: ',A// &
	1792	' The sequence contains:')
[337]	1793	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1794	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1795	362 FORMAT (/' Slicer plane ',A/ &
[336]	1796	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1797	363 FORMAT (/' Particles'/ &
[336]	1798	' particle size: ',F7.2,' m')
	1799	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1800	F6.2,',',F6.2,']')
[337]	1801	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1802	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1803	')'/ &
	1804	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1805	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1806	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1807	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1808	#endif
	1809	#if defined( __spectra )
	1810	370 FORMAT (' Spectra:')
	1811	371 FORMAT (' Output every ',F7.1,' s'/)
	1812	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1813	' Directions: ', 10(A5,',')/ &
[189]	1814	' height levels k = ', 20(I3,',')/ &
	1815	' ', 20(I3,',')/ &
	1816	' ', 20(I3,',')/ &
	1817	' ', 20(I3,',')/ &
	1818	' ', 19(I3,','),I3,'.'/ &
[1]	1819	' height levels selected for standard plot:'/ &
[189]	1820	' k = ', 20(I3,',')/ &
	1821	' ', 20(I3,',')/ &
	1822	' ', 20(I3,',')/ &
	1823	' ', 20(I3,',')/ &
	1824	' ', 19(I3,','),I3,'.'/ &
[1]	1825	' Time averaged over ', F7.1, ' s,' / &
	1826	' Profiles for the time averaging are taken every ', &
	1827	F6.1,' s')
	1828	#endif
	1829	400 FORMAT (//' Physical quantities:'/ &
	1830	' -------------------'/)
	1831	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1832	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1833	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1834	' f* = ',F9.6,' 1/s')
	1835	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1836	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1837	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1838	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1839	' ------------------------'/)
[57]	1840	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1841	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1842	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1843	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1844	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1845	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1846	' Height: ',A,' m'/ &
	1847	' Temperature: ',A,' K'/ &
	1848	' Gradient: ',A,' K/100m'/ &
	1849	' Gridpoint: ',A)
	1850	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1851	' Height: ',A,' m'/ &
	1852	' Humidity: ',A,' kg/kg'/ &
	1853	' Gradient: ',A,' (kg/kg)/100m'/ &
	1854	' Gridpoint: ',A)
	1855	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1856	' Height: ',A,' m'/ &
	1857	' Scalar concentration: ',A,' kg/m**3'/ &
	1858	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1859	' Gridpoint: ',A)
	1860	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1861	' Height: ',A,' m'/ &
	1862	' ug: ',A,' m/s'/ &
	1863	' Gradient: ',A,' 1/100s'/ &
	1864	' Gridpoint: ',A)
	1865	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1866	' Height: ',A,' m'/ &
[97]	1867	' vg: ',A,' m/s'/ &
[1]	1868	' Gradient: ',A,' 1/100s'/ &
	1869	' Gridpoint: ',A)
[97]	1870	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1871	' Height: ',A,' m'/ &
	1872	' Salinity: ',A,' psu'/ &
	1873	' Gradient: ',A,' psu/100m'/ &
	1874	' Gridpoint: ',A)
[411]	1875	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1876	' Height: ',A,' m'/ &
	1877	' w_subs: ',A,' m/s'/ &
	1878	' Gradient: ',A,' (m/s)/100m'/ &
	1879	' Gridpoint: ',A)
[767]	1880	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1881	' profiles')
[824]	1882	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1883	' ----------------------------------'/)
	1884	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1885	'on)')
	1886	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1887	' total water content is used.'/ &
	1888	' Condensation is parameterized via 0% - or 100% scheme.')
	1889	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1890	'icle model')
	1891	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1892	' droplets < 1.0E-6 m')
[825]	1893	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1894	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1895	'are used'/ &
	1896	' number of radius classes: ',I3,' interval ', &
	1897	'[1.0E-6,2.0E-4] m'/ &
	1898	' number of dissipation classes: ',I2,' interval ', &
	1899	'[0,1000] cm2/s3')
	1900	437 FORMAT (' Droplet collision is switched off')
[1]	1901	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1902	' ---------------------------'/)
[824]	1903	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1904	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1905	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1906	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1907	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1908	470 FORMAT (//' Actions during the simulation:'/ &
	1909	' -----------------------------'/)
[94]	1910	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1911	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1912	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1913	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1914	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1915	' to i/j =',I4)
	1916	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1917	1X,F5.3, ' m2/s2')
	1918	474 FORMAT (' Random number generator used : ',A/)
	1919	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1920	'respectively, if'/ &
	1921	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1922	' 3D-simulation'/)
	1923	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1924	'respectively, if the'/ &
	1925	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1926	' the 3D-simulation'/)
	1927	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1928	'respectively, if the'/ &
	1929	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1930	' the 3D-simulation'/)
	1931	480 FORMAT (' Particles:'/ &
	1932	' ---------'// &
	1933	' Particle advection is active (switched on at t = ', F7.1, &
	1934	' s)'/ &
	1935	' Start of new particle generations every ',F6.1,' s'/ &
	1936	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1937	' bottom: ', A, ' top: ', A/&
	1938	' Maximum particle age: ',F9.1,' s'/ &
[117]	1939	' Advection stopped at t = ',F9.1,' s'/ &
	1940	' Particles are sorted every ',F9.1,' s'/)
[1]	1941	481 FORMAT (' Particles have random start positions'/)
[336]	1942	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1943	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1944	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1945	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1946	' Maximum age of the end of the tail: ',F8.2,' s')
	1947	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1948	486 FORMAT (' Particle statistics are written on file'/)
	1949	487 FORMAT (' Number of particle groups: ',I2/)
	1950	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1951	' minimum timestep for advection: ', F7.5/)
	1952	489 FORMAT (' Number of particles simultaneously released at each ', &
	1953	'point: ', I5/)
	1954	490 FORMAT (' Particle group ',I2,':'/ &
	1955	' Particle radius: ',E10.3, 'm')
	1956	491 FORMAT (' Particle inertia is activated'/ &
	1957	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1958	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1959	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1960	' y:',F8.1,' - ',F8.1,' m'/&
	1961	' z:',F8.1,' - ',F8.1,' m'/&
	1962	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1963	' m dz = ',F8.1,' m'/)
	1964	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1965	F8.2,' s'/)
	1966	495 FORMAT (' Number of particles in total domain: ',I10/)
	1967	500 FORMAT (//' 1D-Model parameters:'/ &
	1968	' -------------------'// &
	1969	' Simulation time: ',F8.1,' s'/ &
	1970	' Run-controll output every: ',F8.1,' s'/ &
	1971	' Vertical profile output every: ',F8.1,' s'/ &
	1972	' Mixing length calculation: ',A/ &
	1973	' Dissipation calculation: ',A/)
	1974	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1975	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1976	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1977
	1978
	1979	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |