Home

Context Navigation

check_parameters.f90 @ 1111

Last change on this file since 1111 was 1111, checked in by raasch, 12 years ago

New:
---

GPU porting of pres, swap_timelevel. Adjustments of openACC directives.
Further porting of poisfft, which now runs completely on GPU without any
host/device data transfer for serial an parallel runs (but parallel runs
require data transfer before and after the MPI transpositions).
GPU-porting of tridiagonal solver:
tridiagonal routines split into extermal subroutines (instead using CONTAINS),
no distinction between parallel/non-parallel in poisfft and tridia any more,
tridia routines moved to end of file because of probable bug in PGI compiler
(otherwise "invalid device function" is indicated during runtime).
(cuda_fft_interfaces, fft_xy, flow_statistics, init_3d_model, palm, poisfft, pres, prognostic_equations, swap_timelevel, time_integration, transpose)
output of accelerator board information. (header)

optimization of tridia routines: constant elements and coefficients of tri are
stored in seperate arrays ddzuw and tric, last dimension of tri reduced from 5 to 2,
(init_grid, init_3d_model, modules, palm, poisfft)

poisfft_init is now called internally from poisfft,
(Makefile, Makefile_check, init_pegrid, poisfft, poisfft_hybrid)

CPU-time per grid point and timestep is output to CPU_MEASURES file
(cpu_statistics, modules, time_integration)

Changed:

resorting from/to array work changed, work now has 4 dimensions instead of 1 (transpose)
array diss allocated only if required (init_3d_model)

pressure boundary condition "Neumann+inhomo" removed from the code
(check_parameters, header, poisfft, poisfft_hybrid, pres)

Errors:

bugfix: dependency added for cuda_fft_interfaces (Makefile)
bugfix: CUDA fft plans adjusted for domain decomposition (before they always
used total domain) (fft_xy)

Property svn:keywords set to Id

File size: 142.5 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	! ibc_p_b = 2 removed
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1111 2013-03-08 23:54:10Z raasch $
27	!
28	! 1103 2013-02-20 02:15:53Z raasch
29	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
30	!
31	! 1092 2013-02-02 11:24:22Z raasch
32	! unused variables removed
33	!
34	! 1069 2012-11-28 16:18:43Z maronga
35	! allow usage of topography in combination with cloud physics
36	!
37	! 1065 2012-11-22 17:42:36Z hoffmann
38	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
39	! precipitation in order to save computational resources.
40	!
41	! 1060 2012-11-21 07:19:51Z raasch
42	! additional check for parameter turbulent_inflow
43	!
44	! 1053 2012-11-13 17:11:03Z hoffmann
45	! necessary changes for the new two-moment cloud physics scheme added:
46	! - check cloud physics scheme (Kessler or Seifert and Beheng)
47	! - plant_canopy is not allowed
48	! - currently, only cache loop_optimization is allowed
49	! - initial profiles of nr, qr
50	! - boundary condition of nr, qr
51	! - check output quantities (qr, nr, prr)
52	!
53	! 1036 2012-10-22 13:43:42Z raasch
54	! code put under GPL (PALM 3.9)
55	!
56	! 1031/1034 2012-10-22 11:32:49Z raasch
57	! check of netcdf4 parallel file support
58	!
59	! 1019 2012-09-28 06:46:45Z raasch
60	! non-optimized version of prognostic_equations not allowed any more
61	!
62	! 1015 2012-09-27 09:23:24Z raasch
63	! acc allowed for loop optimization,
64	! checks for adjustment of mixing length to the Prandtl mixing length removed
65	!
66	! 1003 2012-09-14 14:35:53Z raasch
67	! checks for cases with unequal subdomain sizes removed
68	!
69	! 1001 2012-09-13 14:08:46Z raasch
70	! all actions concerning leapfrog- and upstream-spline-scheme removed
71	!
72	! 996 2012-09-07 10:41:47Z raasch
73	! little reformatting
74
75	! 978 2012-08-09 08:28:32Z fricke
76	! setting of bc_lr/ns_dirneu/neudir
77	! outflow damping layer removed
78	! check for z0h*
79	! check for pt_damping_width
80	!
81	! 964 2012-07-26 09:14:24Z raasch
82	! check of old profil-parameters removed
83	!
84	! 940 2012-07-09 14:31:00Z raasch
85	! checks for parameter neutral
86	!
87	! 924 2012-06-06 07:44:41Z maronga
88	! Bugfix: preprocessor directives caused error during compilation
89	!
90	! 892 2012-05-02 13:51:44Z maronga
91	! Bugfix for parameter file check ( excluding __netcdf4 )
92	!
93	! 866 2012-03-28 06:44:41Z raasch
94	! use only 60% of the geostrophic wind as translation speed in case of Galilean
95	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
96	! timestep
97	!
98	! 861 2012-03-26 14:18:34Z suehring
99	! Check for topography and ws-scheme removed.
100	! Check for loop_optimization = 'vector' and ws-scheme removed.
101	!
102	! 845 2012-03-07 10:23:05Z maronga
103	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
104	!
105	! 828 2012-02-21 12:00:36Z raasch
106	! check of collision_kernel extended
107	!
108	! 825 2012-02-19 03:03:44Z raasch
109	! check for collision_kernel and curvature_solution_effects
110	!
111	! 809 2012-01-30 13:32:58Z maronga
112	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
113	!
114	! 807 2012-01-25 11:53:51Z maronga
115	! New cpp directive "__check" implemented which is used by check_namelist_files
116	!
117	! 774 2011-10-27 13:34:16Z letzel
118	! bugfix for prescribed u,v-profiles
119	!
120	! 767 2011-10-14 06:39:12Z raasch
121	! Calculating u,v-profiles from given profiles by linear interpolation.
122	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
123	!
124	! 707 2011-03-29 11:39:40Z raasch
125	! setting of bc_lr/ns_dirrad/raddir
126	!
127	! 689 2011-02-20 19:31:12z gryschka
128	! Bugfix for some logical expressions
129	! (syntax was not compatible with all compilers)
130	!
131	! 680 2011-02-04 23:16:06Z gryschka
132	! init_vortex is not allowed with volume_flow_control
133	!
134	! 673 2011-01-18 16:19:48Z suehring
135	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
136	!
137	! 667 2010-12-23 12:06:00Z suehring/gryschka
138	! Exchange of parameters between ocean and atmosphere via PE0
139	! Check for illegal combination of ws-scheme and timestep scheme.
140	! Check for topography and ws-scheme.
141	! Check for not cyclic boundary conditions in combination with ws-scheme and
142	! loop_optimization = 'vector'.
143	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
144	! Different processor/grid topology in atmosphere and ocean is now allowed!
145	! Bugfixes in checking for conserve_volume_flow_mode
146	! 600 2010-11-24 16:10:51Z raasch
147	! change due to new default value of surface_waterflux
148	! 580 2010-10-05 13:59:11Z heinze
149	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
150	!
151	! 567 2010-10-01 10:46:30Z helmke
152	! calculating masks changed
153	!
154	! 564 2010-09-30 13:18:59Z helmke
155	! palm message identifiers of masked output changed, 20 replaced by max_masks
156	!
157	! 553 2010-09-01 14:09:06Z weinreis
158	! masks is calculated and removed from inipar
159	!
160	! 531 2010-04-21 06:47:21Z heinze
161	! Bugfix: unit of hyp changed to dbar
162	!
163	! 524 2010-03-30 02:04:51Z raasch
164	! Bugfix: "/" in netcdf profile variable names replaced by ":"
165	!
166	! 493 2010-03-01 08:30:24Z raasch
167	! netcdf_data_format is checked
168	!
169	! 411 2009-12-11 14:15:58Z heinze
170	! Enabled passive scalar/humidity wall fluxes for non-flat topography
171	! Initialization of large scale vertical motion (subsidence/ascent)
172	!
173	! 410 2009-12-04 17:05:40Z letzel
174	! masked data output
175	!
176	! 388 2009-09-23 09:40:33Z raasch
177	! Check profiles fpr prho and hyp.
178	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
179	! interval has been set, respective error message is included
180	! bc_lr_cyc and bc_ns_cyc are set,
181	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
182	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
183	! Coupling with independent precursor runs.
184	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
185	! Bugfix: pressure included for profile output
186	! Check pressure gradient conditions
187	! topography_grid_convention moved from user_check_parameters
188	! 'single_street_canyon'
189	! Added shf* and qsws* to the list of available output data
190	!
191	! 222 2009-01-12 16:04:16Z letzel
192	! +user_check_parameters
193	! Output of messages replaced by message handling routine.
194	! Implementation of an MPI-1 coupling: replaced myid with target_id,
195	! deleted __mpi2 directives
196	! Check that PALM is called with mrun -K parallel for coupling
197	!
198	! 197 2008-09-16 15:29:03Z raasch
199	! Bug fix: Construction of vertical profiles when 10 gradients have been
200	! specified in the parameter list (ug, vg, pt, q, sa, lad)
201	!
202	! Strict grid matching along z is not needed for mg-solver.
203	! Leaf area density (LAD) explicitly set to its surface value at k=0
204	! Case of reading data for recycling included in initializing_actions,
205	! check of turbulent_inflow and calculation of recycling_plane.
206	! q*2 profile added
207	!
208	! 138 2007-11-28 10:03:58Z letzel
209	! Plant canopy added
210	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
211	! Multigrid solver allows topography, checking of dt_sort_particles
212	! Bugfix: initializing u_init and v_init in case of ocean runs
213	!
214	! 109 2007-08-28 15:26:47Z letzel
215	! Check coupling_mode and set default (obligatory) values (like boundary
216	! conditions for temperature and fluxes) in case of coupled runs.
217	! +profiles for wp and w"e
218	! Bugfix: Error message concerning output of particle concentration (pc)
219	! modified
220	! More checks and more default values for coupled runs
221	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
222	! cloud_physics = .T.)
223	! Rayleigh damping for ocean fixed.
224	! Check and, if necessary, set default value for dt_coupling
225	!
226	! 97 2007-06-21 08:23:15Z raasch
227	! Initial salinity profile is calculated, salinity boundary conditions are
228	! checked,
229	! z_max_do1d is checked only in case of ocean = .f.,
230	! +initial temperature and geostrophic velocity profiles for the ocean version,
231	! use_pt_reference renamed use_reference
232	!
233	! 89 2007-05-25 12:08:31Z raasch
234	! Check for user-defined profiles
235	!
236	! 75 2007-03-22 09:54:05Z raasch
237	! "by_user" allowed as initializing action, -data_output_ts,
238	! leapfrog with non-flat topography not allowed any more, loop_optimization
239	! and pt_reference are checked, moisture renamed humidity,
240	! output of precipitation amount/rate and roughnes length + check
241	! possible negative humidities are avoided in initial profile,
242	! dirichlet/neumann changed to dirichlet/radiation, etc.,
243	! revision added to run_description_header
244	!
245	! 20 2007-02-26 00:12:32Z raasch
246	! Temperature and humidity gradients at top are now calculated for nzt+1,
247	! top_heatflux and respective boundary condition bc_pt_t is checked
248	!
249	! RCS Log replace by Id keyword, revision history cleaned up
250	!
251	! Revision 1.61 2006/08/04 14:20:25 raasch
252	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
253	! use_upstream_for_tke, default value for dt_dopts,
254	! generation of file header moved from routines palm and header to here
255	!
256	! Revision 1.1 1997/08/26 06:29:23 raasch
257	! Initial revision
258	!
259	!
260	! Description:
261	! ------------
262	! Check control parameters and deduce further quantities.
263	!------------------------------------------------------------------------------!
264
265	USE arrays_3d
266	USE cloud_parameters
267	USE constants
268	USE control_parameters
269	USE dvrp_variables
270	USE grid_variables
271	USE indices
272	USE model_1d
273	USE netcdf_control
274	USE particle_attributes
275	USE pegrid
276	USE profil_parameter
277	USE subsidence_mod
278	USE statistics
279	USE transpose_indices
280
281	IMPLICIT NONE
282
283	CHARACTER (LEN=1) :: sq
284	CHARACTER (LEN=6) :: var
285	CHARACTER (LEN=7) :: unit
286	CHARACTER (LEN=8) :: date
287	CHARACTER (LEN=10) :: time
288	CHARACTER (LEN=40) :: coupling_string
289	CHARACTER (LEN=100) :: action
290
291	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
292	LOGICAL :: found, ldum
293	REAL :: gradient, remote = 0.0, simulation_time_since_reference
294
295	!
296	!-- Warning, if host is not set
297	IF ( host(1:1) == ' ' ) THEN
298	message_string = '"host" is not set. Please check that environment ' // &
299	'variable "localhost" & is set before running PALM'
300	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
301	ENDIF
302
303	!
304	!-- Check the coupling mode
305	IF ( coupling_mode /= 'uncoupled' .AND. &
306	coupling_mode /= 'atmosphere_to_ocean' .AND. &
307	coupling_mode /= 'ocean_to_atmosphere' ) THEN
308	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
309	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
310	ENDIF
311
312	!
313	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
314	IF ( coupling_mode /= 'uncoupled') THEN
315
316	IF ( dt_coupling == 9999999.9 ) THEN
317	message_string = 'dt_coupling is not set but required for coup' // &
318	'ling mode "' // TRIM( coupling_mode ) // '"'
319	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
320	ENDIF
321
322	#if defined( __parallel )
323
324	!
325	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
326	!-- program.
327	!-- check_namelist_files will need the following information of the other
328	!-- model (atmosphere/ocean).
329	! dt_coupling = remote
330	! dt_max = remote
331	! restart_time = remote
332	! dt_restart= remote
333	! simulation_time_since_reference = remote
334	! dx = remote
335
336
337	#if ! defined( __check )
338	IF ( myid == 0 ) THEN
339	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
340	ierr )
341	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
342	status, ierr )
343	ENDIF
344	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
345	#endif
346	IF ( dt_coupling /= remote ) THEN
347	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
348	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
349	'dt_coupling_remote = ', remote
350	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
351	ENDIF
352	IF ( dt_coupling <= 0.0 ) THEN
353	#if ! defined( __check )
354	IF ( myid == 0 ) THEN
355	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
356	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
357	status, ierr )
358	ENDIF
359	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
360	#endif
361	dt_coupling = MAX( dt_max, remote )
362	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
363	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
364	'MAX(dt_max(A,O)) = ', dt_coupling
365	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
366	ENDIF
367	#if ! defined( __check )
368	IF ( myid == 0 ) THEN
369	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
370	ierr )
371	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
372	status, ierr )
373	ENDIF
374	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
375	#endif
376	IF ( restart_time /= remote ) THEN
377	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
378	'": restart_time = ', restart_time, '& is not equal to ', &
379	'restart_time_remote = ', remote
380	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
381	ENDIF
382	#if ! defined( __check )
383	IF ( myid == 0 ) THEN
384	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
385	ierr )
386	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
387	status, ierr )
388	ENDIF
389	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
390	#endif
391	IF ( dt_restart /= remote ) THEN
392	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
393	'": dt_restart = ', dt_restart, '& is not equal to ', &
394	'dt_restart_remote = ', remote
395	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
396	ENDIF
397
398	simulation_time_since_reference = end_time - coupling_start_time
399	#if ! defined( __check )
400	IF ( myid == 0 ) THEN
401	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
402	14, comm_inter, ierr )
403	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
404	status, ierr )
405	ENDIF
406	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
407	#endif
408	IF ( simulation_time_since_reference /= remote ) THEN
409	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
410	'": simulation_time_since_reference = ', &
411	simulation_time_since_reference, '& is not equal to ', &
412	'simulation_time_since_reference_remote = ', remote
413	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
414	ENDIF
415
416	#if ! defined( __check )
417	IF ( myid == 0 ) THEN
418	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
419	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
420	status, ierr )
421	ENDIF
422	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
423
424	#endif
425	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
426
427	IF ( dx < remote ) THEN
428	WRITE( message_string, * ) 'coupling mode "', &
429	TRIM( coupling_mode ), &
430	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
431	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
432	ENDIF
433
434	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
435	WRITE( message_string, * ) 'coupling mode "', &
436	TRIM( coupling_mode ), &
437	'": Domain size in x-direction is not equal in ocean and atmosphere'
438	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
439	ENDIF
440
441	ENDIF
442
443	#if ! defined( __check )
444	IF ( myid == 0) THEN
445	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
446	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
447	status, ierr )
448	ENDIF
449	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
450	#endif
451	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
452
453	IF ( dy < remote ) THEN
454	WRITE( message_string, * ) 'coupling mode "', &
455	TRIM( coupling_mode ), &
456	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
457	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
458	ENDIF
459
460	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
461	WRITE( message_string, * ) 'coupling mode "', &
462	TRIM( coupling_mode ), &
463	'": Domain size in y-direction is not equal in ocean and atmosphere'
464	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
465	ENDIF
466
467	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
468	WRITE( message_string, * ) 'coupling mode "', &
469	TRIM( coupling_mode ), &
470	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
471	' atmosphere'
472	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
473	ENDIF
474
475	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
476	WRITE( message_string, * ) 'coupling mode "', &
477	TRIM( coupling_mode ), &
478	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
479	' atmosphere'
480	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
481	ENDIF
482
483	ENDIF
484	#else
485	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
486	' ''mrun -K parallel'''
487	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
488	#endif
489	ENDIF
490
491	#if defined( __parallel ) && ! defined ( __check )
492	!
493	!-- Exchange via intercommunicator
494	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
495	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
496	ierr )
497	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
498	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
499	comm_inter, status, ierr )
500	ENDIF
501	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
502
503	#endif
504
505
506	!
507	!-- Generate the file header which is used as a header for most of PALM's
508	!-- output files
509	CALL DATE_AND_TIME( date, time )
510	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
511	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
512	IF ( coupling_mode == 'uncoupled' ) THEN
513	coupling_string = ''
514	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
515	coupling_string = ' coupled (atmosphere)'
516	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
517	coupling_string = ' coupled (ocean)'
518	ENDIF
519
520	WRITE ( run_description_header, &
521	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
522	TRIM( version ), TRIM( revision ), 'run: ', &
523	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
524	'host: ', TRIM( host ), run_date, run_time
525
526	!
527	!-- Check the general loop optimization method
528	IF ( loop_optimization == 'default' ) THEN
529	IF ( host(1:3) == 'nec' ) THEN
530	loop_optimization = 'vector'
531	ELSE
532	loop_optimization = 'cache'
533	ENDIF
534	ENDIF
535
536	SELECT CASE ( TRIM( loop_optimization ) )
537
538	CASE ( 'acc', 'cache', 'vector' )
539	CONTINUE
540
541	CASE DEFAULT
542	message_string = 'illegal value given for loop_optimization: "' // &
543	TRIM( loop_optimization ) // '"'
544	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
545
546	END SELECT
547
548	!
549	!-- Check topography setting (check for illegal parameter combinations)
550	IF ( topography /= 'flat' ) THEN
551	action = ' '
552	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
553	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
554	ENDIF
555	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
556	THEN
557	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
558	ENDIF
559	IF ( psolver == 'sor' ) THEN
560	WRITE( action, '(A,A)' ) 'psolver = ', psolver
561	ENDIF
562	IF ( sloping_surface ) THEN
563	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
564	ENDIF
565	IF ( galilei_transformation ) THEN
566	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
567	ENDIF
568	IF ( cloud_droplets ) THEN
569	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE. (has not been tested)'
570	ENDIF
571	IF ( .NOT. prandtl_layer ) THEN
572	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
573	ENDIF
574	IF ( action /= ' ' ) THEN
575	message_string = 'a non-flat topography does not allow ' // &
576	TRIM( action )
577	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
578	ENDIF
579	!
580	!-- In case of non-flat topography, check whether the convention how to
581	!-- define the topography grid has been set correctly, or whether the default
582	!-- is applicable. If this is not possible, abort.
583	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
584	IF ( TRIM( topography ) /= 'single_building' .AND. &
585	TRIM( topography ) /= 'single_street_canyon' .AND. &
586	TRIM( topography ) /= 'read_from_file' ) THEN
587	!-- The default value is not applicable here, because it is only valid
588	!-- for the two standard cases 'single_building' and 'read_from_file'
589	!-- defined in init_grid.
590	WRITE( message_string, * ) &
591	'The value for "topography_grid_convention" ', &
592	'is not set. Its default value is & only valid for ', &
593	'"topography" = ''single_building'', ', &
594	'''single_street_canyon'' & or ''read_from_file''.', &
595	' & Choose ''cell_edge'' or ''cell_center''.'
596	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
597	ELSE
598	!-- The default value is applicable here.
599	!-- Set convention according to topography.
600	IF ( TRIM( topography ) == 'single_building' .OR. &
601	TRIM( topography ) == 'single_street_canyon' ) THEN
602	topography_grid_convention = 'cell_edge'
603	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
604	topography_grid_convention = 'cell_center'
605	ENDIF
606	ENDIF
607	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
608	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
609	WRITE( message_string, * ) &
610	'The value for "topography_grid_convention" is ', &
611	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
612	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
613	ENDIF
614
615	ENDIF
616
617	!
618	!-- Check ocean setting
619	IF ( ocean ) THEN
620
621	action = ' '
622	IF ( action /= ' ' ) THEN
623	message_string = 'ocean = .T. does not allow ' // TRIM( action )
624	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
625	ENDIF
626
627	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
628	TRIM( coupling_char ) == '_O' ) THEN
629
630	!
631	!-- Check whether an (uncoupled) atmospheric run has been declared as an
632	!-- ocean run (this setting is done via mrun-option -y)
633
634	message_string = 'ocean = .F. does not allow coupling_char = "' // &
635	TRIM( coupling_char ) // '" set by mrun-option "-y"'
636	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
637
638	ENDIF
639	!
640	!-- Check cloud scheme
641	IF ( cloud_scheme == 'seifert_beheng' ) THEN
642	icloud_scheme = 0
643	ELSEIF ( cloud_scheme == 'kessler' ) THEN
644	icloud_scheme = 1
645	ELSE
646	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
647	TRIM( cloud_scheme ) // '"'
648	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
649	ENDIF
650	!
651	!-- Check whether there are any illegal values
652	!-- Pressure solver:
653	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
654	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
655	message_string = 'unknown solver for perturbation pressure: psolver' // &
656	' = "' // TRIM( psolver ) // '"'
657	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
658	ENDIF
659
660	#if defined( __parallel )
661	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
662	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
663	'for a 1d domain-decomposition along x & please do' // &
664	' not set npey/=1 in the parameter file'
665	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
666	ENDIF
667	#else
668	IF ( psolver == 'poisfft_hybrid' ) THEN
669	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
670	' for a parallel environment'
671	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
672	ENDIF
673	#endif
674
675	IF ( psolver == 'multigrid' ) THEN
676	IF ( cycle_mg == 'w' ) THEN
677	gamma_mg = 2
678	ELSEIF ( cycle_mg == 'v' ) THEN
679	gamma_mg = 1
680	ELSE
681	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
682	TRIM( cycle_mg ) // '"'
683	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
684	ENDIF
685	ENDIF
686
687	IF ( fft_method /= 'singleton-algorithm' .AND. &
688	fft_method /= 'temperton-algorithm' .AND. &
689	fft_method /= 'system-specific' ) THEN
690	message_string = 'unknown fft-algorithm: fft_method = "' // &
691	TRIM( fft_method ) // '"'
692	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
693	ENDIF
694
695	IF( momentum_advec == 'ws-scheme' .AND. &
696	.NOT. call_psolver_at_all_substeps ) THEN
697	message_string = 'psolver must be called at each RK3 substep when "'//&
698	TRIM(momentum_advec) // ' "is used for momentum_advec'
699	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
700	END IF
701	!
702	!-- Advection schemes:
703	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
704	THEN
705	message_string = 'unknown advection scheme: momentum_advec = "' // &
706	TRIM( momentum_advec ) // '"'
707	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
708	ENDIF
709	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
710	.AND. ( timestep_scheme == 'euler' .OR. &
711	timestep_scheme == 'runge-kutta-2' ) ) &
712	THEN
713	message_string = 'momentum_advec or scalar_advec = "' &
714	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
715	TRIM( timestep_scheme ) // '"'
716	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
717	ENDIF
718	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
719	scalar_advec /= 'bc-scheme' ) &
720	THEN
721	message_string = 'unknown advection scheme: scalar_advec = "' // &
722	TRIM( scalar_advec ) // '"'
723	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
724	ENDIF
725	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
726	THEN
727	message_string = 'advection_scheme scalar_advec = "' &
728	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
729	TRIM( loop_optimization ) // '"'
730	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
731	ENDIF
732
733	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
734	use_upstream_for_tke = .TRUE.
735	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
736	'use_sgs_for_particles = .TRUE.'
737	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
738	ENDIF
739
740	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
741	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
742	'curvature_solution_effects = .TRUE.'
743	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
744	ENDIF
745
746	!
747	!-- Set LOGICAL switches to enhance performance
748	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
749	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
750
751	!
752	!-- Timestep schemes:
753	SELECT CASE ( TRIM( timestep_scheme ) )
754
755	CASE ( 'euler' )
756	intermediate_timestep_count_max = 1
757
758	CASE ( 'runge-kutta-2' )
759	intermediate_timestep_count_max = 2
760
761	CASE ( 'runge-kutta-3' )
762	intermediate_timestep_count_max = 3
763
764	CASE DEFAULT
765	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
766	TRIM( timestep_scheme ) // '"'
767	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
768
769	END SELECT
770
771	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
772	.AND. timestep_scheme(1:5) == 'runge' ) THEN
773	message_string = 'momentum advection scheme "' // &
774	TRIM( momentum_advec ) // '" & does not work with ' // &
775	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
776	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
777	ENDIF
778
779	!
780	!-- Collision kernels:
781	SELECT CASE ( TRIM( collision_kernel ) )
782
783	CASE ( 'hall', 'hall_fast' )
784	hall_kernel = .TRUE.
785
786	CASE ( 'palm' )
787	palm_kernel = .TRUE.
788
789	CASE ( 'wang', 'wang_fast' )
790	wang_kernel = .TRUE.
791
792	CASE ( 'none' )
793
794
795	CASE DEFAULT
796	message_string = 'unknown collision kernel: collision_kernel = "' // &
797	TRIM( collision_kernel ) // '"'
798	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
799
800	END SELECT
801	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
802
803	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
804	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
805	!
806	!-- No restart run: several initialising actions are possible
807	action = initializing_actions
808	DO WHILE ( TRIM( action ) /= '' )
809	position = INDEX( action, ' ' )
810	SELECT CASE ( action(1:position-1) )
811
812	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
813	'by_user', 'initialize_vortex', 'initialize_ptanom' )
814	action = action(position+1:)
815
816	CASE DEFAULT
817	message_string = 'initializing_action = "' // &
818	TRIM( action ) // '" unkown or not allowed'
819	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
820
821	END SELECT
822	ENDDO
823	ENDIF
824
825	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
826	conserve_volume_flow ) THEN
827	message_string = 'initializing_actions = "initialize_vortex"' // &
828	' ist not allowed with conserve_volume_flow = .T.'
829	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
830	ENDIF
831
832
833	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
834	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
835	message_string = 'initializing_actions = "set_constant_profiles"' // &
836	' and "set_1d-model_profiles" are not allowed ' // &
837	'simultaneously'
838	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
839	ENDIF
840
841	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
842	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
843	message_string = 'initializing_actions = "set_constant_profiles"' // &
844	' and "by_user" are not allowed simultaneously'
845	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
846	ENDIF
847
848	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
849	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
850	message_string = 'initializing_actions = "by_user" and ' // &
851	'"set_1d-model_profiles" are not allowed simultaneously'
852	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
853	ENDIF
854
855	IF ( cloud_physics .AND. .NOT. humidity ) THEN
856	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
857	'not allowed with humidity = ', humidity
858	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
859	ENDIF
860
861	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
862	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
863	'not allowed with cloud_physics = ', cloud_physics
864	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
865	ENDIF
866
867	IF ( humidity .AND. sloping_surface ) THEN
868	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
869	'are not allowed simultaneously'
870	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
871	ENDIF
872
873	IF ( passive_scalar .AND. humidity ) THEN
874	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
875	'is not allowed simultaneously'
876	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
877	ENDIF
878
879	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
880	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
881	'coefficient & given value is drag_coefficient = 0.0'
882	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
883	ENDIF
884
885	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
886	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
887	' seifert_beheng'
888	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
889	ENDIF
890
891	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
892	icloud_scheme == 0 ) THEN
893	message_string = 'cloud_scheme = seifert_beheng requires ' // &
894	'loop_optimization = cache'
895	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
896	ENDIF
897
898	IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
899	.NOT. precipitation ) THEN
900	message_string = 'cloud_scheme = seifert_beheng requires ' // &
901	'precipitation = .TRUE.'
902	CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
903	ENDIF
904
905	!
906	!-- In case of no model continuation run, check initialising parameters and
907	!-- deduce further quantities
908	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
909
910	!
911	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
912	pt_init = pt_surface
913	IF ( humidity ) THEN
914	q_init = q_surface
915	!
916	!-- It is not allowed to choose initial profiles of rain water content
917	!-- and rain drop concentration. They are set to 0.0.
918	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
919	qr_init = 0.0
920	nr_init = 0.0
921	ENDIF
922	ENDIF
923	IF ( ocean ) sa_init = sa_surface
924	IF ( passive_scalar ) q_init = s_surface
925	IF ( plant_canopy ) lad = 0.0
926
927	!
928	!--
929	!-- If required, compute initial profile of the geostrophic wind
930	!-- (component ug)
931	i = 1
932	gradient = 0.0
933
934	IF ( .NOT. ocean ) THEN
935
936	ug_vertical_gradient_level_ind(1) = 0
937	ug(0) = ug_surface
938	DO k = 1, nzt+1
939	IF ( i < 11 ) THEN
940	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
941	ug_vertical_gradient_level(i) >= 0.0 ) THEN
942	gradient = ug_vertical_gradient(i) / 100.0
943	ug_vertical_gradient_level_ind(i) = k - 1
944	i = i + 1
945	ENDIF
946	ENDIF
947	IF ( gradient /= 0.0 ) THEN
948	IF ( k /= 1 ) THEN
949	ug(k) = ug(k-1) + dzu(k) * gradient
950	ELSE
951	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
952	ENDIF
953	ELSE
954	ug(k) = ug(k-1)
955	ENDIF
956	ENDDO
957
958	ELSE
959
960	ug_vertical_gradient_level_ind(1) = nzt+1
961	ug(nzt+1) = ug_surface
962	DO k = nzt, nzb, -1
963	IF ( i < 11 ) THEN
964	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
965	ug_vertical_gradient_level(i) <= 0.0 ) THEN
966	gradient = ug_vertical_gradient(i) / 100.0
967	ug_vertical_gradient_level_ind(i) = k + 1
968	i = i + 1
969	ENDIF
970	ENDIF
971	IF ( gradient /= 0.0 ) THEN
972	IF ( k /= nzt ) THEN
973	ug(k) = ug(k+1) - dzu(k+1) * gradient
974	ELSE
975	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
976	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
977	ENDIF
978	ELSE
979	ug(k) = ug(k+1)
980	ENDIF
981	ENDDO
982
983	ENDIF
984
985	!
986	!-- In case of no given gradients for ug, choose a zero gradient
987	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
988	ug_vertical_gradient_level(1) = 0.0
989	ENDIF
990
991	!
992	!--
993	!-- If required, compute initial profile of the geostrophic wind
994	!-- (component vg)
995	i = 1
996	gradient = 0.0
997
998	IF ( .NOT. ocean ) THEN
999
1000	vg_vertical_gradient_level_ind(1) = 0
1001	vg(0) = vg_surface
1002	DO k = 1, nzt+1
1003	IF ( i < 11 ) THEN
1004	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1005	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1006	gradient = vg_vertical_gradient(i) / 100.0
1007	vg_vertical_gradient_level_ind(i) = k - 1
1008	i = i + 1
1009	ENDIF
1010	ENDIF
1011	IF ( gradient /= 0.0 ) THEN
1012	IF ( k /= 1 ) THEN
1013	vg(k) = vg(k-1) + dzu(k) * gradient
1014	ELSE
1015	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
1016	ENDIF
1017	ELSE
1018	vg(k) = vg(k-1)
1019	ENDIF
1020	ENDDO
1021
1022	ELSE
1023
1024	vg_vertical_gradient_level_ind(1) = nzt+1
1025	vg(nzt+1) = vg_surface
1026	DO k = nzt, nzb, -1
1027	IF ( i < 11 ) THEN
1028	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1029	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1030	gradient = vg_vertical_gradient(i) / 100.0
1031	vg_vertical_gradient_level_ind(i) = k + 1
1032	i = i + 1
1033	ENDIF
1034	ENDIF
1035	IF ( gradient /= 0.0 ) THEN
1036	IF ( k /= nzt ) THEN
1037	vg(k) = vg(k+1) - dzu(k+1) * gradient
1038	ELSE
1039	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1040	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1041	ENDIF
1042	ELSE
1043	vg(k) = vg(k+1)
1044	ENDIF
1045	ENDDO
1046
1047	ENDIF
1048
1049	!
1050	!-- In case of no given gradients for vg, choose a zero gradient
1051	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1052	vg_vertical_gradient_level(1) = 0.0
1053	ENDIF
1054
1055	!
1056	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1057	!-- interpolate them from wind profile data (if given)
1058	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1059
1060	u_init = ug
1061	v_init = vg
1062
1063	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1064
1065	IF ( uv_heights(1) /= 0.0 ) THEN
1066	message_string = 'uv_heights(1) must be 0.0'
1067	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1068	ENDIF
1069
1070	use_prescribed_profile_data = .TRUE.
1071
1072	kk = 1
1073	u_init(0) = 0.0
1074	v_init(0) = 0.0
1075
1076	DO k = 1, nz+1
1077
1078	IF ( kk < 100 ) THEN
1079	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1080	kk = kk + 1
1081	IF ( kk == 100 ) EXIT
1082	ENDDO
1083	ENDIF
1084
1085	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1086	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1087	( uv_heights(kk+1) - uv_heights(kk) ) * &
1088	( u_profile(kk+1) - u_profile(kk) )
1089	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1090	( uv_heights(kk+1) - uv_heights(kk) ) * &
1091	( v_profile(kk+1) - v_profile(kk) )
1092	ELSE
1093	u_init(k) = u_profile(kk)
1094	v_init(k) = v_profile(kk)
1095	ENDIF
1096
1097	ENDDO
1098
1099	ELSE
1100
1101	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1102	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1103
1104	ENDIF
1105
1106	!
1107	!-- Compute initial temperature profile using the given temperature gradients
1108	IF ( .NOT. neutral ) THEN
1109
1110	i = 1
1111	gradient = 0.0
1112
1113	IF ( .NOT. ocean ) THEN
1114
1115	pt_vertical_gradient_level_ind(1) = 0
1116	DO k = 1, nzt+1
1117	IF ( i < 11 ) THEN
1118	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1119	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1120	gradient = pt_vertical_gradient(i) / 100.0
1121	pt_vertical_gradient_level_ind(i) = k - 1
1122	i = i + 1
1123	ENDIF
1124	ENDIF
1125	IF ( gradient /= 0.0 ) THEN
1126	IF ( k /= 1 ) THEN
1127	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1128	ELSE
1129	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1130	ENDIF
1131	ELSE
1132	pt_init(k) = pt_init(k-1)
1133	ENDIF
1134	ENDDO
1135
1136	ELSE
1137
1138	pt_vertical_gradient_level_ind(1) = nzt+1
1139	DO k = nzt, 0, -1
1140	IF ( i < 11 ) THEN
1141	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1142	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1143	gradient = pt_vertical_gradient(i) / 100.0
1144	pt_vertical_gradient_level_ind(i) = k + 1
1145	i = i + 1
1146	ENDIF
1147	ENDIF
1148	IF ( gradient /= 0.0 ) THEN
1149	IF ( k /= nzt ) THEN
1150	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1151	ELSE
1152	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1153	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1154	ENDIF
1155	ELSE
1156	pt_init(k) = pt_init(k+1)
1157	ENDIF
1158	ENDDO
1159
1160	ENDIF
1161
1162	ENDIF
1163
1164	!
1165	!-- In case of no given temperature gradients, choose gradient of neutral
1166	!-- stratification
1167	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1168	pt_vertical_gradient_level(1) = 0.0
1169	ENDIF
1170
1171	!
1172	!-- Store temperature gradient at the top boundary for possible Neumann
1173	!-- boundary condition
1174	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1175
1176	!
1177	!-- If required, compute initial humidity or scalar profile using the given
1178	!-- humidity/scalar gradient. In case of scalar transport, initially store
1179	!-- values of the scalar parameters on humidity parameters
1180	IF ( passive_scalar ) THEN
1181	bc_q_b = bc_s_b
1182	bc_q_t = bc_s_t
1183	q_surface = s_surface
1184	q_surface_initial_change = s_surface_initial_change
1185	q_vertical_gradient = s_vertical_gradient
1186	q_vertical_gradient_level = s_vertical_gradient_level
1187	surface_waterflux = surface_scalarflux
1188	wall_humidityflux = wall_scalarflux
1189	ENDIF
1190
1191	IF ( humidity .OR. passive_scalar ) THEN
1192
1193	i = 1
1194	gradient = 0.0
1195	q_vertical_gradient_level_ind(1) = 0
1196	DO k = 1, nzt+1
1197	IF ( i < 11 ) THEN
1198	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1199	q_vertical_gradient_level(i) >= 0.0 ) THEN
1200	gradient = q_vertical_gradient(i) / 100.0
1201	q_vertical_gradient_level_ind(i) = k - 1
1202	i = i + 1
1203	ENDIF
1204	ENDIF
1205	IF ( gradient /= 0.0 ) THEN
1206	IF ( k /= 1 ) THEN
1207	q_init(k) = q_init(k-1) + dzu(k) * gradient
1208	ELSE
1209	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1210	ENDIF
1211	ELSE
1212	q_init(k) = q_init(k-1)
1213	ENDIF
1214	!
1215	!-- Avoid negative humidities
1216	IF ( q_init(k) < 0.0 ) THEN
1217	q_init(k) = 0.0
1218	ENDIF
1219	ENDDO
1220
1221	!
1222	!-- In case of no given humidity gradients, choose zero gradient
1223	!-- conditions
1224	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1225	q_vertical_gradient_level(1) = 0.0
1226	ENDIF
1227
1228	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1229
1230	i = 1
1231	gradient = 0.0
1232	qr_vertical_gradient_level_ind(1) = 0
1233	DO k = 1, nzt+1
1234	IF ( i < 11 ) THEN
1235	IF ( qr_vertical_gradient_level(i) < zu(k) .AND. &
1236	qr_vertical_gradient_level(i) >= 0.0 ) THEN
1237	gradient = qr_vertical_gradient(i) / 100.0
1238	qr_vertical_gradient_level_ind(i) = k - 1
1239	i = i + 1
1240	ENDIF
1241	ENDIF
1242	IF ( gradient /= 0.0 ) THEN
1243	IF ( k /= 1 ) THEN
1244	qr_init(k) = qr_init(k-1) + dzu(k) * gradient
1245	ELSE
1246	qr_init(k) = qr_init(k-1) + 0.5 * dzu(k) * gradient
1247	ENDIF
1248	ELSE
1249	qr_init(k) = qr_init(k-1)
1250	ENDIF
1251	!
1252	!-- Avoid negative rain water content
1253	IF ( qr_init(k) < 0.0 ) THEN
1254	qr_init(k) = 0.0
1255	ENDIF
1256	ENDDO
1257	!
1258	!-- In case of no given rain water content gradients, choose zero gradient
1259	!-- conditions
1260	IF ( qr_vertical_gradient_level(1) == -1.0 ) THEN
1261	qr_vertical_gradient_level(1) = 0.0
1262	ENDIF
1263
1264	i = 1
1265	gradient = 0.0
1266	nr_vertical_gradient_level_ind(1) = 0
1267	DO k = 1, nzt+1
1268	IF ( i < 11 ) THEN
1269	IF ( nr_vertical_gradient_level(i) < zu(k) .AND. &
1270	nr_vertical_gradient_level(i) >= 0.0 ) THEN
1271	gradient = nr_vertical_gradient(i) / 100.0
1272	nr_vertical_gradient_level_ind(i) = k - 1
1273	i = i + 1
1274	ENDIF
1275	ENDIF
1276	IF ( gradient /= 0.0 ) THEN
1277	IF ( k /= 1 ) THEN
1278	nr_init(k) = nr_init(k-1) + dzu(k) * gradient
1279	ELSE
1280	nr_init(k) = nr_init(k-1) + 0.5 * dzu(k) * gradient
1281	ENDIF
1282	ELSE
1283	nr_init(k) = nr_init(k-1)
1284	ENDIF
1285	!
1286	!-- Avoid negative rain water content
1287	IF ( nr_init(k) < 0.0 ) THEN
1288	nr_init(k) = 0.0
1289	ENDIF
1290	ENDDO
1291	!
1292	!-- In case of no given rain water content gradients, choose zero gradient
1293	!-- conditions
1294	IF ( nr_vertical_gradient_level(1) == -1.0 ) THEN
1295	nr_vertical_gradient_level(1) = 0.0
1296	ENDIF
1297
1298	ENDIF
1299	!
1300	!-- Store humidity, rain water content and rain drop concentration
1301	!-- gradient at the top boundary for possile Neumann boundary condition
1302	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1303
1304	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1305	bc_qr_t_val = ( qr_init(nzt+1) - qr_init(nzt) ) / dzu(nzt+1)
1306	bc_nr_t_val = ( nr_init(nzt+1) - nr_init(nzt) ) / dzu(nzt+1)
1307	ENDIF
1308
1309	ENDIF
1310
1311	!
1312	!-- If required, compute initial salinity profile using the given salinity
1313	!-- gradients
1314	IF ( ocean ) THEN
1315
1316	i = 1
1317	gradient = 0.0
1318
1319	sa_vertical_gradient_level_ind(1) = nzt+1
1320	DO k = nzt, 0, -1
1321	IF ( i < 11 ) THEN
1322	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1323	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1324	gradient = sa_vertical_gradient(i) / 100.0
1325	sa_vertical_gradient_level_ind(i) = k + 1
1326	i = i + 1
1327	ENDIF
1328	ENDIF
1329	IF ( gradient /= 0.0 ) THEN
1330	IF ( k /= nzt ) THEN
1331	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1332	ELSE
1333	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1334	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1335	ENDIF
1336	ELSE
1337	sa_init(k) = sa_init(k+1)
1338	ENDIF
1339	ENDDO
1340
1341	ENDIF
1342
1343	!
1344	!-- If required compute the profile of leaf area density used in the plant
1345	!-- canopy model
1346	IF ( plant_canopy ) THEN
1347
1348	i = 1
1349	gradient = 0.0
1350
1351	IF ( .NOT. ocean ) THEN
1352
1353	lad(0) = lad_surface
1354
1355	lad_vertical_gradient_level_ind(1) = 0
1356	DO k = 1, pch_index
1357	IF ( i < 11 ) THEN
1358	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1359	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1360	gradient = lad_vertical_gradient(i)
1361	lad_vertical_gradient_level_ind(i) = k - 1
1362	i = i + 1
1363	ENDIF
1364	ENDIF
1365	IF ( gradient /= 0.0 ) THEN
1366	IF ( k /= 1 ) THEN
1367	lad(k) = lad(k-1) + dzu(k) * gradient
1368	ELSE
1369	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1370	ENDIF
1371	ELSE
1372	lad(k) = lad(k-1)
1373	ENDIF
1374	ENDDO
1375
1376	ENDIF
1377
1378	!
1379	!-- In case of no given leaf area density gradients, choose a vanishing
1380	!-- gradient
1381	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1382	lad_vertical_gradient_level(1) = 0.0
1383	ENDIF
1384
1385	ENDIF
1386
1387	ENDIF
1388
1389	!
1390	!-- Initialize large scale subsidence if required
1391	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1392	large_scale_subsidence = .TRUE.
1393	CALL init_w_subsidence
1394	END IF
1395
1396
1397
1398	!
1399	!-- Compute Coriolis parameter
1400	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1401	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1402
1403	!
1404	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1405	!-- set the reference temperature equal to the surface temperature.
1406	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1407
1408	!
1409	!-- Reference value has to be used in buoyancy terms
1410	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1411
1412	!
1413	!-- Sign of buoyancy/stability terms
1414	IF ( ocean ) atmos_ocean_sign = -1.0
1415
1416	!
1417	!-- Ocean version must use flux boundary conditions at the top
1418	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1419	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1420	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1421	ENDIF
1422
1423	!
1424	!-- In case of a given slope, compute the relevant quantities
1425	IF ( alpha_surface /= 0.0 ) THEN
1426	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1427	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1428	' ) must be < 90.0'
1429	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1430	ENDIF
1431	sloping_surface = .TRUE.
1432	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1433	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1434	ENDIF
1435
1436	!
1437	!-- Check time step and cfl_factor
1438	IF ( dt /= -1.0 ) THEN
1439	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1440	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1441	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1442	ENDIF
1443	dt_3d = dt
1444	dt_fixed = .TRUE.
1445	ENDIF
1446
1447	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1448	IF ( cfl_factor == -1.0 ) THEN
1449	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1450	cfl_factor = 0.8
1451	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1452	cfl_factor = 0.9
1453	ELSE
1454	cfl_factor = 0.9
1455	ENDIF
1456	ELSE
1457	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1458	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1459	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1460	ENDIF
1461	ENDIF
1462
1463	!
1464	!-- Store simulated time at begin
1465	simulated_time_at_begin = simulated_time
1466
1467	!
1468	!-- Store reference time for coupled runs and change the coupling flag,
1469	!-- if ...
1470	IF ( simulated_time == 0.0 ) THEN
1471	IF ( coupling_start_time == 0.0 ) THEN
1472	time_since_reference_point = 0.0
1473	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1474	run_coupled = .FALSE.
1475	ENDIF
1476	ENDIF
1477
1478	!
1479	!-- Set wind speed in the Galilei-transformed system
1480	IF ( galilei_transformation ) THEN
1481	IF ( use_ug_for_galilei_tr .AND. &
1482	ug_vertical_gradient_level(1) == 0.0 .AND. &
1483	ug_vertical_gradient(1) == 0.0 .AND. &
1484	vg_vertical_gradient_level(1) == 0.0 .AND. &
1485	vg_vertical_gradient(1) == 0.0 ) THEN
1486	u_gtrans = ug_surface * 0.6
1487	v_gtrans = vg_surface * 0.6
1488	ELSEIF ( use_ug_for_galilei_tr .AND. &
1489	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1490	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1491	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1492	' with galilei transformation'
1493	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1494	ELSEIF ( use_ug_for_galilei_tr .AND. &
1495	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1496	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1497	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1498	' with galilei transformation'
1499	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1500	ELSE
1501	message_string = 'variable translation speed used for galilei-' // &
1502	'transformation, which may cause & instabilities in stably ' // &
1503	'stratified regions'
1504	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1505	ENDIF
1506	ENDIF
1507
1508	!
1509	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1510	!-- fluxes have to be used in the diffusion-terms
1511	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1512
1513	!
1514	!-- Check boundary conditions and set internal variables:
1515	!-- Lateral boundary conditions
1516	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1517	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
1518	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
1519	message_string = 'unknown boundary condition: bc_lr = "' // &
1520	TRIM( bc_lr ) // '"'
1521	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1522	ENDIF
1523	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1524	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
1525	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
1526	message_string = 'unknown boundary condition: bc_ns = "' // &
1527	TRIM( bc_ns ) // '"'
1528	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1529	ENDIF
1530
1531	!
1532	!-- Internal variables used for speed optimization in if clauses
1533	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1534	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1535	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1536	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
1537	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
1538	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1539	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1540	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1541	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
1542	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
1543
1544	!
1545	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1546	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1547	!-- and tools do not work with non-cyclic boundary conditions.
1548	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1549	IF ( psolver /= 'multigrid' ) THEN
1550	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1551	'psolver = "' // TRIM( psolver ) // '"'
1552	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1553	ENDIF
1554	IF ( momentum_advec /= 'pw-scheme' .AND. &
1555	momentum_advec /= 'ws-scheme') THEN
1556	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1557	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1558	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1559	ENDIF
1560	IF ( scalar_advec /= 'pw-scheme' .AND. &
1561	scalar_advec /= 'ws-scheme' ) THEN
1562	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1563	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1564	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1565	ENDIF
1566	IF ( galilei_transformation ) THEN
1567	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1568	'galilei_transformation = .T.'
1569	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1570	ENDIF
1571	ENDIF
1572
1573	!
1574	!-- Bottom boundary condition for the turbulent Kinetic energy
1575	IF ( bc_e_b == 'neumann' ) THEN
1576	ibc_e_b = 1
1577	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1578	ibc_e_b = 2
1579	IF ( prandtl_layer ) THEN
1580	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1581	TRIM( bc_e_b ) // '"'
1582	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1583	ENDIF
1584	IF ( .NOT. prandtl_layer ) THEN
1585	bc_e_b = 'neumann'
1586	ibc_e_b = 1
1587	message_string = 'boundary condition bc_e_b changed to "' // &
1588	TRIM( bc_e_b ) // '"'
1589	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1590	ENDIF
1591	ELSE
1592	message_string = 'unknown boundary condition: bc_e_b = "' // &
1593	TRIM( bc_e_b ) // '"'
1594	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1595	ENDIF
1596
1597	!
1598	!-- Boundary conditions for perturbation pressure
1599	IF ( bc_p_b == 'dirichlet' ) THEN
1600	ibc_p_b = 0
1601	ELSEIF ( bc_p_b == 'neumann' ) THEN
1602	ibc_p_b = 1
1603	ELSE
1604	message_string = 'unknown boundary condition: bc_p_b = "' // &
1605	TRIM( bc_p_b ) // '"'
1606	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1607	ENDIF
1608
1609	IF ( bc_p_t == 'dirichlet' ) THEN
1610	ibc_p_t = 0
1611	ELSEIF ( bc_p_t == 'neumann' ) THEN
1612	ibc_p_t = 1
1613	ELSE
1614	message_string = 'unknown boundary condition: bc_p_t = "' // &
1615	TRIM( bc_p_t ) // '"'
1616	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1617	ENDIF
1618
1619	!
1620	!-- Boundary conditions for potential temperature
1621	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1622	ibc_pt_b = 2
1623	ELSE
1624	IF ( bc_pt_b == 'dirichlet' ) THEN
1625	ibc_pt_b = 0
1626	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1627	ibc_pt_b = 1
1628	ELSE
1629	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1630	TRIM( bc_pt_b ) // '"'
1631	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1632	ENDIF
1633	ENDIF
1634
1635	IF ( bc_pt_t == 'dirichlet' ) THEN
1636	ibc_pt_t = 0
1637	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1638	ibc_pt_t = 1
1639	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1640	ibc_pt_t = 2
1641	ELSE
1642	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1643	TRIM( bc_pt_t ) // '"'
1644	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1645	ENDIF
1646
1647	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1648	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1649
1650	IF ( neutral ) THEN
1651
1652	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1653	THEN
1654	message_string = 'heatflux must not be set for pure neutral flow'
1655	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1656	ENDIF
1657
1658	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1659	THEN
1660	message_string = 'heatflux must not be set for pure neutral flow'
1661	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1662	ENDIF
1663
1664	ENDIF
1665
1666	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1667	top_momentumflux_v /= 9999999.9 ) THEN
1668	constant_top_momentumflux = .TRUE.
1669	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1670	top_momentumflux_v == 9999999.9 ) ) THEN
1671	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1672	'must be set'
1673	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1674	ENDIF
1675
1676	!
1677	!-- A given surface temperature implies Dirichlet boundary condition for
1678	!-- temperature. In this case specification of a constant heat flux is
1679	!-- forbidden.
1680	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1681	surface_heatflux /= 0.0 ) THEN
1682	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1683	'& is not allowed with constant_heatflux = .TRUE.'
1684	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1685	ENDIF
1686	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1687	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1688	'wed with pt_surface_initial_change (/=0) = ', &
1689	pt_surface_initial_change
1690	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1691	ENDIF
1692
1693	!
1694	!-- A given temperature at the top implies Dirichlet boundary condition for
1695	!-- temperature. In this case specification of a constant heat flux is
1696	!-- forbidden.
1697	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1698	top_heatflux /= 0.0 ) THEN
1699	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1700	'" is not allowed with constant_top_heatflux = .TRUE.'
1701	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1702	ENDIF
1703
1704	!
1705	!-- Boundary conditions for salinity
1706	IF ( ocean ) THEN
1707	IF ( bc_sa_t == 'dirichlet' ) THEN
1708	ibc_sa_t = 0
1709	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1710	ibc_sa_t = 1
1711	ELSE
1712	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1713	TRIM( bc_sa_t ) // '"'
1714	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1715	ENDIF
1716
1717	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1718	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1719	message_string = 'boundary condition: bc_sa_t = "' // &
1720	TRIM( bc_sa_t ) // '" requires to set ' // &
1721	'top_salinityflux'
1722	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1723	ENDIF
1724
1725	!
1726	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1727	!-- salinity. In this case specification of a constant salinity flux is
1728	!-- forbidden.
1729	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1730	top_salinityflux /= 0.0 ) THEN
1731	message_string = 'boundary condition: bc_sa_t = "' // &
1732	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1733	'constant_top_salinityflux = .TRUE.'
1734	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1735	ENDIF
1736
1737	ENDIF
1738
1739	!
1740	!-- In case of humidity or passive scalar, set boundary conditions for total
1741	!-- water content / scalar
1742	IF ( humidity .OR. passive_scalar ) THEN
1743	IF ( humidity ) THEN
1744	sq = 'q'
1745	ELSE
1746	sq = 's'
1747	ENDIF
1748	IF ( bc_q_b == 'dirichlet' ) THEN
1749	ibc_q_b = 0
1750	ELSEIF ( bc_q_b == 'neumann' ) THEN
1751	ibc_q_b = 1
1752	ELSE
1753	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1754	'_b ="' // TRIM( bc_q_b ) // '"'
1755	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1756	ENDIF
1757	IF ( bc_q_t == 'dirichlet' ) THEN
1758	ibc_q_t = 0
1759	ELSEIF ( bc_q_t == 'neumann' ) THEN
1760	ibc_q_t = 1
1761	ELSE
1762	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1763	'_t ="' // TRIM( bc_q_t ) // '"'
1764	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1765	ENDIF
1766
1767	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1768
1769	!
1770	!-- A given surface humidity implies Dirichlet boundary condition for
1771	!-- humidity. In this case specification of a constant water flux is
1772	!-- forbidden.
1773	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1774	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1775	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1776	'th prescribed surface flux'
1777	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1778	ENDIF
1779	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1780	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1781	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1782	q_surface_initial_change
1783	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1784	ENDIF
1785
1786	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1787	IF ( bc_qr_b == 'dirichlet' ) THEN
1788	ibc_qr_b = 0
1789	ELSEIF ( bc_qr_b == 'neumann' ) THEN
1790	ibc_qr_b = 1
1791	ELSE
1792	message_string = 'unknown boundary condition: bc_qr_b ="' // &
1793	TRIM( bc_qr_b ) // '"'
1794	CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 )
1795	ENDIF
1796	IF ( bc_qr_t == 'dirichlet' ) THEN
1797	ibc_qr_t = 0
1798	ELSEIF ( bc_qr_t == 'neumann' ) THEN
1799	ibc_qr_t = 1
1800	ELSE
1801	message_string = 'unknown boundary condition: bc_qr_t ="' // &
1802	TRIM( bc_qr_t ) // '"'
1803	CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 )
1804	ENDIF
1805	IF ( bc_nr_b == 'dirichlet' ) THEN
1806	ibc_nr_b = 0
1807	ELSEIF ( bc_nr_b == 'neumann' ) THEN
1808	ibc_nr_b = 1
1809	ELSE
1810	message_string = 'unknown boundary condition: bc_nr_b ="' // &
1811	TRIM( bc_nr_b ) // '"'
1812	CALL message( 'check_parameters', 'PA0355', 1, 2, 0, 6, 0 )
1813	ENDIF
1814	IF ( bc_nr_t == 'dirichlet' ) THEN
1815	ibc_nr_t = 0
1816	ELSEIF ( bc_nr_t == 'neumann' ) THEN
1817	ibc_nr_t = 1
1818	ELSE
1819	message_string = 'unknown boundary condition: bc_nr_t ="' // &
1820	TRIM( bc_nr_t ) // '"'
1821	CALL message( 'check_parameters', 'PA0356', 1, 2, 0, 6, 0 )
1822	ENDIF
1823	ENDIF
1824
1825	ENDIF
1826
1827	!
1828	!-- Boundary conditions for horizontal components of wind speed
1829	IF ( bc_uv_b == 'dirichlet' ) THEN
1830	ibc_uv_b = 0
1831	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1832	ibc_uv_b = 1
1833	IF ( prandtl_layer ) THEN
1834	message_string = 'boundary condition: bc_uv_b = "' // &
1835	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1836	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1837	ENDIF
1838	ELSE
1839	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1840	TRIM( bc_uv_b ) // '"'
1841	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1842	ENDIF
1843	!
1844	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1845	!-- assigned with the u and v values of the ocean surface
1846	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1847	ibc_uv_b = 2
1848	ENDIF
1849
1850	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1851	bc_uv_t = 'neumann'
1852	ibc_uv_t = 1
1853	ELSE
1854	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1855	ibc_uv_t = 0
1856	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1857	!
1858	!-- Velocities for the initial u,v-profiles are set zero at the top
1859	!-- in case of dirichlet_0 conditions
1860	u_init(nzt+1) = 0.0
1861	v_init(nzt+1) = 0.0
1862	ENDIF
1863	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1864	ibc_uv_t = 1
1865	ELSE
1866	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1867	TRIM( bc_uv_t ) // '"'
1868	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1869	ENDIF
1870	ENDIF
1871
1872	!
1873	!-- Compute and check, respectively, the Rayleigh Damping parameter
1874	IF ( rayleigh_damping_factor == -1.0 ) THEN
1875	rayleigh_damping_factor = 0.0
1876	ELSE
1877	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1878	THEN
1879	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1880	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1881	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1882	ENDIF
1883	ENDIF
1884
1885	IF ( rayleigh_damping_height == -1.0 ) THEN
1886	IF ( .NOT. ocean ) THEN
1887	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1888	ELSE
1889	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1890	ENDIF
1891	ELSE
1892	IF ( .NOT. ocean ) THEN
1893	IF ( rayleigh_damping_height < 0.0 .OR. &
1894	rayleigh_damping_height > zu(nzt) ) THEN
1895	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1896	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1897	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1898	ENDIF
1899	ELSE
1900	IF ( rayleigh_damping_height > 0.0 .OR. &
1901	rayleigh_damping_height < zu(nzb) ) THEN
1902	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1903	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1904	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1905	ENDIF
1906	ENDIF
1907	ENDIF
1908
1909	!
1910	!-- Check number of chosen statistic regions. More than 10 regions are not
1911	!-- allowed, because so far no more than 10 corresponding output files can
1912	!-- be opened (cf. check_open)
1913	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1914	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1915	statistic_regions+1, ' but only 10 regions are allowed'
1916	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1917	ENDIF
1918	IF ( normalizing_region > statistic_regions .OR. &
1919	normalizing_region < 0) THEN
1920	WRITE ( message_string, * ) 'normalizing_region = ', &
1921	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1922	' (value of statistic_regions)'
1923	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1924	ENDIF
1925
1926	!
1927	!-- Check the interval for sorting particles.
1928	!-- Using particles as cloud droplets requires sorting after each timestep.
1929	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1930	dt_sort_particles = 0.0
1931	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1932	'_droplets = .TRUE.'
1933	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1934	ENDIF
1935
1936	!
1937	!-- Set the default intervals for data output, if necessary
1938	!-- NOTE: dt_dosp has already been set in package_parin
1939	IF ( dt_data_output /= 9999999.9 ) THEN
1940	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1941	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1942	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1943	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1944	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1945	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1946	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1947	DO mid = 1, max_masks
1948	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1949	ENDDO
1950	ENDIF
1951
1952	!
1953	!-- Set the default skip time intervals for data output, if necessary
1954	IF ( skip_time_dopr == 9999999.9 ) &
1955	skip_time_dopr = skip_time_data_output
1956	IF ( skip_time_dosp == 9999999.9 ) &
1957	skip_time_dosp = skip_time_data_output
1958	IF ( skip_time_do2d_xy == 9999999.9 ) &
1959	skip_time_do2d_xy = skip_time_data_output
1960	IF ( skip_time_do2d_xz == 9999999.9 ) &
1961	skip_time_do2d_xz = skip_time_data_output
1962	IF ( skip_time_do2d_yz == 9999999.9 ) &
1963	skip_time_do2d_yz = skip_time_data_output
1964	IF ( skip_time_do3d == 9999999.9 ) &
1965	skip_time_do3d = skip_time_data_output
1966	IF ( skip_time_data_output_av == 9999999.9 ) &
1967	skip_time_data_output_av = skip_time_data_output
1968	DO mid = 1, max_masks
1969	IF ( skip_time_domask(mid) == 9999999.9 ) &
1970	skip_time_domask(mid) = skip_time_data_output
1971	ENDDO
1972
1973	!
1974	!-- Check the average intervals (first for 3d-data, then for profiles and
1975	!-- spectra)
1976	IF ( averaging_interval > dt_data_output_av ) THEN
1977	WRITE( message_string, * ) 'averaging_interval = ', &
1978	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1979	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1980	ENDIF
1981
1982	IF ( averaging_interval_pr == 9999999.9 ) THEN
1983	averaging_interval_pr = averaging_interval
1984	ENDIF
1985
1986	IF ( averaging_interval_pr > dt_dopr ) THEN
1987	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1988	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1989	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1990	ENDIF
1991
1992	IF ( averaging_interval_sp == 9999999.9 ) THEN
1993	averaging_interval_sp = averaging_interval
1994	ENDIF
1995
1996	IF ( averaging_interval_sp > dt_dosp ) THEN
1997	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1998	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1999	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
2000	ENDIF
2001
2002	!
2003	!-- Set the default interval for profiles entering the temporal average
2004	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
2005	dt_averaging_input_pr = dt_averaging_input
2006	ENDIF
2007
2008	!
2009	!-- Set the default interval for the output of timeseries to a reasonable
2010	!-- value (tries to minimize the number of calls of flow_statistics)
2011	IF ( dt_dots == 9999999.9 ) THEN
2012	IF ( averaging_interval_pr == 0.0 ) THEN
2013	dt_dots = MIN( dt_run_control, dt_dopr )
2014	ELSE
2015	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
2016	ENDIF
2017	ENDIF
2018
2019	!
2020	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
2021	IF ( dt_averaging_input > averaging_interval ) THEN
2022	WRITE( message_string, * ) 'dt_averaging_input = ', &
2023	dt_averaging_input, ' must be <= averaging_interval = ', &
2024	averaging_interval
2025	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
2026	ENDIF
2027
2028	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
2029	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
2030	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
2031	averaging_interval_pr
2032	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2033	ENDIF
2034
2035	!
2036	!-- Set the default value for the integration interval of precipitation amount
2037	IF ( precipitation ) THEN
2038	IF ( precipitation_amount_interval == 9999999.9 ) THEN
2039	precipitation_amount_interval = dt_do2d_xy
2040	ELSE
2041	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2042	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2043	precipitation_amount_interval, ' must not be larger than ', &
2044	'dt_do2d_xy = ', dt_do2d_xy
2045	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2046	ENDIF
2047	ENDIF
2048	ENDIF
2049
2050	!
2051	!-- Determine the number of output profiles and check whether they are
2052	!-- permissible
2053	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2054
2055	dopr_n = dopr_n + 1
2056	i = dopr_n
2057
2058	!
2059	!-- Determine internal profile number (for hom, homs)
2060	!-- and store height levels
2061	SELECT CASE ( TRIM( data_output_pr(i) ) )
2062
2063	CASE ( 'u', '#u' )
2064	dopr_index(i) = 1
2065	dopr_unit(i) = 'm/s'
2066	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2067	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2068	dopr_initial_index(i) = 5
2069	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2070	data_output_pr(i) = data_output_pr(i)(2:)
2071	ENDIF
2072
2073	CASE ( 'v', '#v' )
2074	dopr_index(i) = 2
2075	dopr_unit(i) = 'm/s'
2076	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2077	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2078	dopr_initial_index(i) = 6
2079	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2080	data_output_pr(i) = data_output_pr(i)(2:)
2081	ENDIF
2082
2083	CASE ( 'w' )
2084	dopr_index(i) = 3
2085	dopr_unit(i) = 'm/s'
2086	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2087
2088	CASE ( 'pt', '#pt' )
2089	IF ( .NOT. cloud_physics ) THEN
2090	dopr_index(i) = 4
2091	dopr_unit(i) = 'K'
2092	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2093	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2094	dopr_initial_index(i) = 7
2095	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2096	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2097	data_output_pr(i) = data_output_pr(i)(2:)
2098	ENDIF
2099	ELSE
2100	dopr_index(i) = 43
2101	dopr_unit(i) = 'K'
2102	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2103	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2104	dopr_initial_index(i) = 28
2105	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2106	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2107	data_output_pr(i) = data_output_pr(i)(2:)
2108	ENDIF
2109	ENDIF
2110
2111	CASE ( 'e' )
2112	dopr_index(i) = 8
2113	dopr_unit(i) = 'm2/s2'
2114	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2115	hom(nzb,2,8,:) = 0.0
2116
2117	CASE ( 'km', '#km' )
2118	dopr_index(i) = 9
2119	dopr_unit(i) = 'm2/s'
2120	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2121	hom(nzb,2,9,:) = 0.0
2122	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2123	dopr_initial_index(i) = 23
2124	hom(:,2,23,:) = hom(:,2,9,:)
2125	data_output_pr(i) = data_output_pr(i)(2:)
2126	ENDIF
2127
2128	CASE ( 'kh', '#kh' )
2129	dopr_index(i) = 10
2130	dopr_unit(i) = 'm2/s'
2131	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2132	hom(nzb,2,10,:) = 0.0
2133	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2134	dopr_initial_index(i) = 24
2135	hom(:,2,24,:) = hom(:,2,10,:)
2136	data_output_pr(i) = data_output_pr(i)(2:)
2137	ENDIF
2138
2139	CASE ( 'l', '#l' )
2140	dopr_index(i) = 11
2141	dopr_unit(i) = 'm'
2142	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2143	hom(nzb,2,11,:) = 0.0
2144	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2145	dopr_initial_index(i) = 25
2146	hom(:,2,25,:) = hom(:,2,11,:)
2147	data_output_pr(i) = data_output_pr(i)(2:)
2148	ENDIF
2149
2150	CASE ( 'w"u"' )
2151	dopr_index(i) = 12
2152	dopr_unit(i) = 'm2/s2'
2153	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2154	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2155
2156	CASE ( 'wu' )
2157	dopr_index(i) = 13
2158	dopr_unit(i) = 'm2/s2'
2159	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2160
2161	CASE ( 'w"v"' )
2162	dopr_index(i) = 14
2163	dopr_unit(i) = 'm2/s2'
2164	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2165	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2166
2167	CASE ( 'wv' )
2168	dopr_index(i) = 15
2169	dopr_unit(i) = 'm2/s2'
2170	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2171
2172	CASE ( 'w"pt"' )
2173	dopr_index(i) = 16
2174	dopr_unit(i) = 'K m/s'
2175	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2176
2177	CASE ( 'wpt' )
2178	dopr_index(i) = 17
2179	dopr_unit(i) = 'K m/s'
2180	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2181
2182	CASE ( 'wpt' )
2183	dopr_index(i) = 18
2184	dopr_unit(i) = 'K m/s'
2185	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2186
2187	CASE ( 'wu' )
2188	dopr_index(i) = 19
2189	dopr_unit(i) = 'm2/s2'
2190	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2191	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2192
2193	CASE ( 'wv' )
2194	dopr_index(i) = 20
2195	dopr_unit(i) = 'm2/s2'
2196	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2197	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2198
2199	CASE ( 'wptBC' )
2200	dopr_index(i) = 21
2201	dopr_unit(i) = 'K m/s'
2202	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2203
2204	CASE ( 'wptBC' )
2205	dopr_index(i) = 22
2206	dopr_unit(i) = 'K m/s'
2207	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2208
2209	CASE ( 'sa', '#sa' )
2210	IF ( .NOT. ocean ) THEN
2211	message_string = 'data_output_pr = ' // &
2212	TRIM( data_output_pr(i) ) // ' is not imp' // &
2213	'lemented for ocean = .FALSE.'
2214	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2215	ELSE
2216	dopr_index(i) = 23
2217	dopr_unit(i) = 'psu'
2218	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2219	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2220	dopr_initial_index(i) = 26
2221	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2222	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2223	data_output_pr(i) = data_output_pr(i)(2:)
2224	ENDIF
2225	ENDIF
2226
2227	CASE ( 'u*2' )
2228	dopr_index(i) = 30
2229	dopr_unit(i) = 'm2/s2'
2230	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2231
2232	CASE ( 'v*2' )
2233	dopr_index(i) = 31
2234	dopr_unit(i) = 'm2/s2'
2235	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2236
2237	CASE ( 'w*2' )
2238	dopr_index(i) = 32
2239	dopr_unit(i) = 'm2/s2'
2240	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2241
2242	CASE ( 'pt*2' )
2243	dopr_index(i) = 33
2244	dopr_unit(i) = 'K2'
2245	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2246
2247	CASE ( 'e*' )
2248	dopr_index(i) = 34
2249	dopr_unit(i) = 'm2/s2'
2250	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2251
2252	CASE ( 'w2pt' )
2253	dopr_index(i) = 35
2254	dopr_unit(i) = 'K m2/s2'
2255	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2256
2257	CASE ( 'wpt2' )
2258	dopr_index(i) = 36
2259	dopr_unit(i) = 'K2 m/s'
2260	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2261
2262	CASE ( 'we' )
2263	dopr_index(i) = 37
2264	dopr_unit(i) = 'm3/s3'
2265	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2266
2267	CASE ( 'w*3' )
2268	dopr_index(i) = 38
2269	dopr_unit(i) = 'm3/s3'
2270	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2271
2272	CASE ( 'Sw' )
2273	dopr_index(i) = 39
2274	dopr_unit(i) = 'none'
2275	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2276
2277	CASE ( 'p' )
2278	dopr_index(i) = 40
2279	dopr_unit(i) = 'Pa'
2280	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2281
2282	CASE ( 'q', '#q' )
2283	IF ( .NOT. humidity ) THEN
2284	message_string = 'data_output_pr = ' // &
2285	TRIM( data_output_pr(i) ) // ' is not imp' // &
2286	'lemented for humidity = .FALSE.'
2287	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2288	ELSE
2289	dopr_index(i) = 41
2290	dopr_unit(i) = 'kg/kg'
2291	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2292	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2293	dopr_initial_index(i) = 26
2294	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2295	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2296	data_output_pr(i) = data_output_pr(i)(2:)
2297	ENDIF
2298	ENDIF
2299
2300	CASE ( 's', '#s' )
2301	IF ( .NOT. passive_scalar ) THEN
2302	message_string = 'data_output_pr = ' // &
2303	TRIM( data_output_pr(i) ) // ' is not imp' // &
2304	'lemented for passive_scalar = .FALSE.'
2305	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2306	ELSE
2307	dopr_index(i) = 41
2308	dopr_unit(i) = 'kg/m3'
2309	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2310	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2311	dopr_initial_index(i) = 26
2312	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2313	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2314	data_output_pr(i) = data_output_pr(i)(2:)
2315	ENDIF
2316	ENDIF
2317
2318	CASE ( 'qv', '#qv' )
2319	IF ( .NOT. cloud_physics ) THEN
2320	dopr_index(i) = 41
2321	dopr_unit(i) = 'kg/kg'
2322	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2323	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2324	dopr_initial_index(i) = 26
2325	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2326	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2327	data_output_pr(i) = data_output_pr(i)(2:)
2328	ENDIF
2329	ELSE
2330	dopr_index(i) = 42
2331	dopr_unit(i) = 'kg/kg'
2332	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2333	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2334	dopr_initial_index(i) = 27
2335	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2336	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2337	data_output_pr(i) = data_output_pr(i)(2:)
2338	ENDIF
2339	ENDIF
2340
2341	CASE ( 'lpt', '#lpt' )
2342	IF ( .NOT. cloud_physics ) THEN
2343	message_string = 'data_output_pr = ' // &
2344	TRIM( data_output_pr(i) ) // ' is not imp' // &
2345	'lemented for cloud_physics = .FALSE.'
2346	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2347	ELSE
2348	dopr_index(i) = 4
2349	dopr_unit(i) = 'K'
2350	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2351	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2352	dopr_initial_index(i) = 7
2353	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2354	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2355	data_output_pr(i) = data_output_pr(i)(2:)
2356	ENDIF
2357	ENDIF
2358
2359	CASE ( 'vpt', '#vpt' )
2360	dopr_index(i) = 44
2361	dopr_unit(i) = 'K'
2362	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2363	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2364	dopr_initial_index(i) = 29
2365	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2366	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2367	data_output_pr(i) = data_output_pr(i)(2:)
2368	ENDIF
2369
2370	CASE ( 'w"vpt"' )
2371	dopr_index(i) = 45
2372	dopr_unit(i) = 'K m/s'
2373	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2374
2375	CASE ( 'wvpt' )
2376	dopr_index(i) = 46
2377	dopr_unit(i) = 'K m/s'
2378	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2379
2380	CASE ( 'wvpt' )
2381	dopr_index(i) = 47
2382	dopr_unit(i) = 'K m/s'
2383	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2384
2385	CASE ( 'w"q"' )
2386	IF ( .NOT. humidity ) THEN
2387	message_string = 'data_output_pr = ' // &
2388	TRIM( data_output_pr(i) ) // ' is not imp' // &
2389	'lemented for humidity = .FALSE.'
2390	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2391	ELSE
2392	dopr_index(i) = 48
2393	dopr_unit(i) = 'kg/kg m/s'
2394	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2395	ENDIF
2396
2397	CASE ( 'wq' )
2398	IF ( .NOT. humidity ) THEN
2399	message_string = 'data_output_pr = ' // &
2400	TRIM( data_output_pr(i) ) // ' is not imp' // &
2401	'lemented for humidity = .FALSE.'
2402	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2403	ELSE
2404	dopr_index(i) = 49
2405	dopr_unit(i) = 'kg/kg m/s'
2406	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2407	ENDIF
2408
2409	CASE ( 'wq' )
2410	IF ( .NOT. humidity ) THEN
2411	message_string = 'data_output_pr = ' // &
2412	TRIM( data_output_pr(i) ) // ' is not imp' // &
2413	'lemented for humidity = .FALSE.'
2414	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2415	ELSE
2416	dopr_index(i) = 50
2417	dopr_unit(i) = 'kg/kg m/s'
2418	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2419	ENDIF
2420
2421	CASE ( 'w"s"' )
2422	IF ( .NOT. passive_scalar ) THEN
2423	message_string = 'data_output_pr = ' // &
2424	TRIM( data_output_pr(i) ) // ' is not imp' // &
2425	'lemented for passive_scalar = .FALSE.'
2426	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2427	ELSE
2428	dopr_index(i) = 48
2429	dopr_unit(i) = 'kg/m3 m/s'
2430	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2431	ENDIF
2432
2433	CASE ( 'ws' )
2434	IF ( .NOT. passive_scalar ) THEN
2435	message_string = 'data_output_pr = ' // &
2436	TRIM( data_output_pr(i) ) // ' is not imp' // &
2437	'lemented for passive_scalar = .FALSE.'
2438	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2439	ELSE
2440	dopr_index(i) = 49
2441	dopr_unit(i) = 'kg/m3 m/s'
2442	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2443	ENDIF
2444
2445	CASE ( 'ws' )
2446	IF ( .NOT. passive_scalar ) THEN
2447	message_string = 'data_output_pr = ' // &
2448	TRIM( data_output_pr(i) ) // ' is not imp' // &
2449	'lemented for passive_scalar = .FALSE.'
2450	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2451	ELSE
2452	dopr_index(i) = 50
2453	dopr_unit(i) = 'kg/m3 m/s'
2454	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2455	ENDIF
2456
2457	CASE ( 'w"qv"' )
2458	IF ( humidity .AND. .NOT. cloud_physics ) &
2459	THEN
2460	dopr_index(i) = 48
2461	dopr_unit(i) = 'kg/kg m/s'
2462	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2463	ELSEIF( humidity .AND. cloud_physics ) THEN
2464	dopr_index(i) = 51
2465	dopr_unit(i) = 'kg/kg m/s'
2466	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2467	ELSE
2468	message_string = 'data_output_pr = ' // &
2469	TRIM( data_output_pr(i) ) // ' is not imp' // &
2470	'lemented for cloud_physics = .FALSE. an&' // &
2471	'd humidity = .FALSE.'
2472	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2473	ENDIF
2474
2475	CASE ( 'wqv' )
2476	IF ( humidity .AND. .NOT. cloud_physics ) &
2477	THEN
2478	dopr_index(i) = 49
2479	dopr_unit(i) = 'kg/kg m/s'
2480	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2481	ELSEIF( humidity .AND. cloud_physics ) THEN
2482	dopr_index(i) = 52
2483	dopr_unit(i) = 'kg/kg m/s'
2484	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2485	ELSE
2486	message_string = 'data_output_pr = ' // &
2487	TRIM( data_output_pr(i) ) // ' is not imp' // &
2488	'lemented for cloud_physics = .FALSE. an&' // &
2489	'd humidity = .FALSE.'
2490	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2491	ENDIF
2492
2493	CASE ( 'wqv' )
2494	IF ( humidity .AND. .NOT. cloud_physics ) &
2495	THEN
2496	dopr_index(i) = 50
2497	dopr_unit(i) = 'kg/kg m/s'
2498	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2499	ELSEIF( humidity .AND. cloud_physics ) THEN
2500	dopr_index(i) = 53
2501	dopr_unit(i) = 'kg/kg m/s'
2502	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2503	ELSE
2504	message_string = 'data_output_pr = ' // &
2505	TRIM( data_output_pr(i) ) // ' is not imp' // &
2506	'lemented for cloud_physics = .FALSE. an&' // &
2507	'd humidity = .FALSE.'
2508	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2509	ENDIF
2510
2511	CASE ( 'ql' )
2512	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2513	message_string = 'data_output_pr = ' // &
2514	TRIM( data_output_pr(i) ) // ' is not imp' // &
2515	'lemented for cloud_physics = .FALSE. or' // &
2516	'&cloud_droplets = .FALSE.'
2517	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2518	ELSE
2519	dopr_index(i) = 54
2520	dopr_unit(i) = 'kg/kg'
2521	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2522	ENDIF
2523
2524	CASE ( 'wuu*:dz' )
2525	dopr_index(i) = 55
2526	dopr_unit(i) = 'm2/s3'
2527	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2528
2529	CASE ( 'wp:dz' )
2530	dopr_index(i) = 56
2531	dopr_unit(i) = 'm2/s3'
2532	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2533
2534	CASE ( 'w"e:dz' )
2535	dopr_index(i) = 57
2536	dopr_unit(i) = 'm2/s3'
2537	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2538
2539
2540	CASE ( 'u"pt"' )
2541	dopr_index(i) = 58
2542	dopr_unit(i) = 'K m/s'
2543	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2544
2545	CASE ( 'upt' )
2546	dopr_index(i) = 59
2547	dopr_unit(i) = 'K m/s'
2548	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2549
2550	CASE ( 'upt_t' )
2551	dopr_index(i) = 60
2552	dopr_unit(i) = 'K m/s'
2553	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2554
2555	CASE ( 'v"pt"' )
2556	dopr_index(i) = 61
2557	dopr_unit(i) = 'K m/s'
2558	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2559
2560	CASE ( 'vpt' )
2561	dopr_index(i) = 62
2562	dopr_unit(i) = 'K m/s'
2563	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2564
2565	CASE ( 'vpt_t' )
2566	dopr_index(i) = 63
2567	dopr_unit(i) = 'K m/s'
2568	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2569
2570	CASE ( 'rho' )
2571	IF ( .NOT. ocean ) THEN
2572	message_string = 'data_output_pr = ' // &
2573	TRIM( data_output_pr(i) ) // ' is not imp' // &
2574	'lemented for ocean = .FALSE.'
2575	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2576	ELSE
2577	dopr_index(i) = 64
2578	dopr_unit(i) = 'kg/m3'
2579	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2580	ENDIF
2581
2582	CASE ( 'w"sa"' )
2583	IF ( .NOT. ocean ) THEN
2584	message_string = 'data_output_pr = ' // &
2585	TRIM( data_output_pr(i) ) // ' is not imp' // &
2586	'lemented for ocean = .FALSE.'
2587	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2588	ELSE
2589	dopr_index(i) = 65
2590	dopr_unit(i) = 'psu m/s'
2591	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2592	ENDIF
2593
2594	CASE ( 'wsa' )
2595	IF ( .NOT. ocean ) THEN
2596	message_string = 'data_output_pr = ' // &
2597	TRIM( data_output_pr(i) ) // ' is not imp' // &
2598	'lemented for ocean = .FALSE.'
2599	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2600	ELSE
2601	dopr_index(i) = 66
2602	dopr_unit(i) = 'psu m/s'
2603	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2604	ENDIF
2605
2606	CASE ( 'wsa' )
2607	IF ( .NOT. ocean ) THEN
2608	message_string = 'data_output_pr = ' // &
2609	TRIM( data_output_pr(i) ) // ' is not imp' // &
2610	'lemented for ocean = .FALSE.'
2611	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2612	ELSE
2613	dopr_index(i) = 67
2614	dopr_unit(i) = 'psu m/s'
2615	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2616	ENDIF
2617
2618	CASE ( 'wp' )
2619	dopr_index(i) = 68
2620	dopr_unit(i) = 'm3/s3'
2621	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2622
2623	CASE ( 'w"e' )
2624	dopr_index(i) = 69
2625	dopr_unit(i) = 'm3/s3'
2626	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2627
2628	CASE ( 'q*2' )
2629	IF ( .NOT. humidity ) THEN
2630	message_string = 'data_output_pr = ' // &
2631	TRIM( data_output_pr(i) ) // ' is not imp' // &
2632	'lemented for humidity = .FALSE.'
2633	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2634	ELSE
2635	dopr_index(i) = 70
2636	dopr_unit(i) = 'kg2/kg2'
2637	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2638	ENDIF
2639
2640	CASE ( 'prho' )
2641	IF ( .NOT. ocean ) THEN
2642	message_string = 'data_output_pr = ' // &
2643	TRIM( data_output_pr(i) ) // ' is not imp' // &
2644	'lemented for ocean = .FALSE.'
2645	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2646	ELSE
2647	dopr_index(i) = 71
2648	dopr_unit(i) = 'kg/m3'
2649	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2650	ENDIF
2651
2652	CASE ( 'hyp' )
2653	dopr_index(i) = 72
2654	dopr_unit(i) = 'dbar'
2655	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2656
2657	CASE ( 'nr' )
2658	IF ( .NOT. cloud_physics ) THEN
2659	message_string = 'data_output_pr = ' // &
2660	TRIM( data_output_pr(i) ) // ' is not imp' // &
2661	'lemented for cloud_physics = .FALSE.'
2662	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2663	ELSEIF ( icloud_scheme /= 0 ) THEN
2664	message_string = 'data_output_pr = ' // &
2665	TRIM( data_output_pr(i) ) // ' is not imp' // &
2666	'lemented for cloud_scheme /= seifert_beheng'
2667	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2668	ELSE
2669	dopr_index(i) = 73
2670	dopr_unit(i) = '1/m3'
2671	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2672	ENDIF
2673
2674	CASE ( 'qr' )
2675	IF ( .NOT. cloud_physics ) THEN
2676	message_string = 'data_output_pr = ' // &
2677	TRIM( data_output_pr(i) ) // ' is not imp' // &
2678	'lemented for cloud_physics = .FALSE.'
2679	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2680	ELSEIF ( icloud_scheme /= 0 ) THEN
2681	message_string = 'data_output_pr = ' // &
2682	TRIM( data_output_pr(i) ) // ' is not imp' // &
2683	'lemented for cloud_scheme /= seifert_beheng'
2684	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2685	ELSE
2686	dopr_index(i) = 74
2687	dopr_unit(i) = 'kg/kg'
2688	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2689	ENDIF
2690
2691	CASE ( 'qc' )
2692	IF ( .NOT. cloud_physics ) THEN
2693	message_string = 'data_output_pr = ' // &
2694	TRIM( data_output_pr(i) ) // ' is not imp' // &
2695	'lemented for cloud_physics = .FALSE.'
2696	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2697	ELSEIF ( icloud_scheme /= 0 ) THEN
2698	message_string = 'data_output_pr = ' // &
2699	TRIM( data_output_pr(i) ) // ' is not imp' // &
2700	'lemented for cloud_scheme /= seifert_beheng'
2701	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2702	ELSE
2703	dopr_index(i) = 75
2704	dopr_unit(i) = 'kg/kg'
2705	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2706	ENDIF
2707
2708	CASE ( 'prr' )
2709	IF ( .NOT. cloud_physics ) THEN
2710	message_string = 'data_output_pr = ' // &
2711	TRIM( data_output_pr(i) ) // ' is not imp' // &
2712	'lemented for cloud_physics = .FALSE.'
2713	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2714	ELSEIF ( icloud_scheme /= 0 ) THEN
2715	message_string = 'data_output_pr = ' // &
2716	TRIM( data_output_pr(i) ) // ' is not imp' // &
2717	'lemented for cloud_scheme /= seifert_beheng'
2718	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2719	ELSEIF ( .NOT. precipitation ) THEN
2720	message_string = 'data_output_pr = ' // &
2721	TRIM( data_output_pr(i) ) // ' is not imp' // &
2722	'lemented for precipitation = .FALSE.'
2723	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2724
2725	ELSE
2726	dopr_index(i) = 76
2727	dopr_unit(i) = 'kg/kg m/s'
2728	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2729	ENDIF
2730
2731	CASE DEFAULT
2732
2733	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2734
2735	IF ( unit == 'illegal' ) THEN
2736	IF ( data_output_pr_user(1) /= ' ' ) THEN
2737	message_string = 'illegal value for data_output_pr or ' // &
2738	'data_output_pr_user = "' // &
2739	TRIM( data_output_pr(i) ) // '"'
2740	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2741	ELSE
2742	message_string = 'illegal value for data_output_pr = "' // &
2743	TRIM( data_output_pr(i) ) // '"'
2744	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2745	ENDIF
2746	ENDIF
2747
2748	END SELECT
2749
2750	ENDDO
2751
2752
2753	!
2754	!-- Append user-defined data output variables to the standard data output
2755	IF ( data_output_user(1) /= ' ' ) THEN
2756	i = 1
2757	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2758	i = i + 1
2759	ENDDO
2760	j = 1
2761	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2762	IF ( i > 100 ) THEN
2763	message_string = 'number of output quantitities given by data' // &
2764	'_output and data_output_user exceeds the limit of 100'
2765	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2766	ENDIF
2767	data_output(i) = data_output_user(j)
2768	i = i + 1
2769	j = j + 1
2770	ENDDO
2771	ENDIF
2772
2773	!
2774	!-- Check and set steering parameters for 2d/3d data output and averaging
2775	i = 1
2776	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2777	!
2778	!-- Check for data averaging
2779	ilen = LEN_TRIM( data_output(i) )
2780	j = 0 ! no data averaging
2781	IF ( ilen > 3 ) THEN
2782	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2783	j = 1 ! data averaging
2784	data_output(i) = data_output(i)(1:ilen-3)
2785	ENDIF
2786	ENDIF
2787	!
2788	!-- Check for cross section or volume data
2789	ilen = LEN_TRIM( data_output(i) )
2790	k = 0 ! 3d data
2791	var = data_output(i)(1:ilen)
2792	IF ( ilen > 3 ) THEN
2793	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2794	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2795	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2796	k = 1 ! 2d data
2797	var = data_output(i)(1:ilen-3)
2798	ENDIF
2799	ENDIF
2800	!
2801	!-- Check for allowed value and set units
2802	SELECT CASE ( TRIM( var ) )
2803
2804	CASE ( 'e' )
2805	IF ( constant_diffusion ) THEN
2806	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2807	'res constant_diffusion = .FALSE.'
2808	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2809	ENDIF
2810	unit = 'm2/s2'
2811
2812	CASE ( 'lpt' )
2813	IF ( .NOT. cloud_physics ) THEN
2814	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2815	'res cloud_physics = .TRUE.'
2816	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2817	ENDIF
2818	unit = 'K'
2819
2820	CASE ( 'nr' )
2821	IF ( .NOT. cloud_physics ) THEN
2822	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2823	'res cloud_physics = .TRUE.'
2824	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2825	ELSEIF ( icloud_scheme /= 0 ) THEN
2826	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2827	'res cloud_scheme = seifert_beheng'
2828	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2829	ENDIF
2830	unit = '1/m3'
2831
2832	CASE ( 'pc', 'pr' )
2833	IF ( .NOT. particle_advection ) THEN
2834	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2835	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2836	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2837	ENDIF
2838	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2839	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2840
2841	CASE ( 'prr' )
2842	IF ( .NOT. cloud_physics ) THEN
2843	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2844	'res cloud_physics = .TRUE.'
2845	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2846	ELSEIF ( icloud_scheme /= 0 ) THEN
2847	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2848	'res cloud_scheme = seifert_beheng'
2849	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2850	ELSEIF ( .NOT. precipitation ) THEN
2851	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2852	'res precipitation = .TRUE.'
2853	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2854	ENDIF
2855	unit = 'kg/kg m/s'
2856
2857	CASE ( 'q', 'vpt' )
2858	IF ( .NOT. humidity ) THEN
2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2860	'res humidity = .TRUE.'
2861	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2862	ENDIF
2863	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2864	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2865
2866	CASE ( 'qc' )
2867	IF ( .NOT. cloud_physics ) THEN
2868	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2869	'res cloud_physics = .TRUE.'
2870	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2871	ELSEIF ( icloud_scheme /= 0 ) THEN
2872	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2873	'res cloud_scheme = seifert_beheng'
2874	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2875	ENDIF
2876	unit = 'kg/kg'
2877
2878	CASE ( 'ql' )
2879	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2880	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2881	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2882	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2883	ENDIF
2884	unit = 'kg/kg'
2885
2886	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2887	IF ( .NOT. cloud_droplets ) THEN
2888	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2889	'res cloud_droplets = .TRUE.'
2890	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2891	ENDIF
2892	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2893	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2894	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2895
2896	CASE ( 'qr' )
2897	IF ( .NOT. cloud_physics ) THEN
2898	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2899	'res cloud_physics = .TRUE.'
2900	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2901	ELSEIF ( icloud_scheme /= 0 ) THEN
2902	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2903	'res cloud_scheme = seifert_beheng'
2904	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2905	ENDIF
2906	unit = 'kg/kg'
2907
2908	CASE ( 'qv' )
2909	IF ( .NOT. cloud_physics ) THEN
2910	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2911	'res cloud_physics = .TRUE.'
2912	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2913	ENDIF
2914	unit = 'kg/kg'
2915
2916	CASE ( 'rho' )
2917	IF ( .NOT. ocean ) THEN
2918	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2919	'res ocean = .TRUE.'
2920	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2921	ENDIF
2922	unit = 'kg/m3'
2923
2924	CASE ( 's' )
2925	IF ( .NOT. passive_scalar ) THEN
2926	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2927	'res passive_scalar = .TRUE.'
2928	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2929	ENDIF
2930	unit = 'conc'
2931
2932	CASE ( 'sa' )
2933	IF ( .NOT. ocean ) THEN
2934	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2935	'res ocean = .TRUE.'
2936	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2937	ENDIF
2938	unit = 'psu'
2939
2940	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2941	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2942	message_string = 'illegal value for data_output: "' // &
2943	TRIM( var ) // '" & only 2d-horizontal ' // &
2944	'cross sections are allowed for this value'
2945	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2946	ENDIF
2947	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2948	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2949	'res cloud_physics = .TRUE.'
2950	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2951	ENDIF
2952	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2953	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2954	'res precipitation = .TRUE.'
2955	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2956	ENDIF
2957	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2958	message_string = 'temporal averaging of precipitation ' // &
2959	'amount "' // TRIM( var ) // '" is not possible'
2960	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2961	ENDIF
2962	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2963	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2964	'res precipitation = .TRUE.'
2965	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2966	ENDIF
2967	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2968	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2969	'res humidity = .TRUE.'
2970	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2971	ENDIF
2972
2973	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2974	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2975	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2976	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2977	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2978	IF ( TRIM( var ) == 't*' ) unit = 'K'
2979	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2980	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2981	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2982
2983
2984	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2985	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2986	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2987	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2988	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2989	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2990	CONTINUE
2991
2992	CASE DEFAULT
2993	CALL user_check_data_output( var, unit )
2994
2995	IF ( unit == 'illegal' ) THEN
2996	IF ( data_output_user(1) /= ' ' ) THEN
2997	message_string = 'illegal value for data_output or ' // &
2998	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2999	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3000	ELSE
3001	message_string = 'illegal value for data_output =' // &
3002	TRIM( data_output(i) ) // '"'
3003	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3004	ENDIF
3005	ENDIF
3006
3007	END SELECT
3008	!
3009	!-- Set the internal steering parameters appropriately
3010	IF ( k == 0 ) THEN
3011	do3d_no(j) = do3d_no(j) + 1
3012	do3d(j,do3d_no(j)) = data_output(i)
3013	do3d_unit(j,do3d_no(j)) = unit
3014	ELSE
3015	do2d_no(j) = do2d_no(j) + 1
3016	do2d(j,do2d_no(j)) = data_output(i)
3017	do2d_unit(j,do2d_no(j)) = unit
3018	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3019	data_output_xy(j) = .TRUE.
3020	ENDIF
3021	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3022	data_output_xz(j) = .TRUE.
3023	ENDIF
3024	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3025	data_output_yz(j) = .TRUE.
3026	ENDIF
3027	ENDIF
3028
3029	IF ( j == 1 ) THEN
3030	!
3031	!-- Check, if variable is already subject to averaging
3032	found = .FALSE.
3033	DO k = 1, doav_n
3034	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3035	ENDDO
3036
3037	IF ( .NOT. found ) THEN
3038	doav_n = doav_n + 1
3039	doav(doav_n) = var
3040	ENDIF
3041	ENDIF
3042
3043	i = i + 1
3044	ENDDO
3045
3046	!
3047	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3048	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3049	WRITE( message_string, * ) 'output of averaged quantity "', &
3050	TRIM( doav(1) ), '_av" requires to set a ', &
3051	'non-zero & averaging interval'
3052	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3053	ENDIF
3054
3055	!
3056	!-- Check sectional planes and store them in one shared array
3057	IF ( ANY( section_xy > nz + 1 ) ) THEN
3058	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3059	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3060	ENDIF
3061	IF ( ANY( section_xz > ny + 1 ) ) THEN
3062	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3063	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3064	ENDIF
3065	IF ( ANY( section_yz > nx + 1 ) ) THEN
3066	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3067	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3068	ENDIF
3069	section(:,1) = section_xy
3070	section(:,2) = section_xz
3071	section(:,3) = section_yz
3072
3073	!
3074	!-- Upper plot limit for 2D vertical sections
3075	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3076	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3077	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3078	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3079	' (zu(nzt))'
3080	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3081	ENDIF
3082
3083	!
3084	!-- Upper plot limit for 3D arrays
3085	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3086
3087	!
3088	!-- Determine and check accuracy for compressed 3D plot output
3089	IF ( do3d_compress ) THEN
3090	!
3091	!-- Compression only permissible on T3E machines
3092	IF ( host(1:3) /= 't3e' ) THEN
3093	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3094	TRIM( host ) // '"'
3095	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3096	ENDIF
3097
3098	i = 1
3099	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3100
3101	ilen = LEN_TRIM( do3d_comp_prec(i) )
3102	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3103	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3104	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3105	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3106	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3107	ENDIF
3108
3109	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3110	var = do3d_comp_prec(i)(1:ilen-1)
3111
3112	SELECT CASE ( var )
3113
3114	CASE ( 'u' )
3115	j = 1
3116	CASE ( 'v' )
3117	j = 2
3118	CASE ( 'w' )
3119	j = 3
3120	CASE ( 'p' )
3121	j = 4
3122	CASE ( 'pt' )
3123	j = 5
3124
3125	CASE DEFAULT
3126	WRITE( message_string, * ) 'unknown variable "', &
3127	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3128	i, ')'
3129	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3130
3131	END SELECT
3132
3133	plot_3d_precision(j)%precision = prec
3134	i = i + 1
3135
3136	ENDDO
3137	ENDIF
3138
3139	!
3140	!-- Check the data output format(s)
3141	IF ( data_output_format(1) == ' ' ) THEN
3142	!
3143	!-- Default value
3144	netcdf_output = .TRUE.
3145	ELSE
3146	i = 1
3147	DO WHILE ( data_output_format(i) /= ' ' )
3148
3149	SELECT CASE ( data_output_format(i) )
3150
3151	CASE ( 'netcdf' )
3152	netcdf_output = .TRUE.
3153	CASE ( 'iso2d' )
3154	iso2d_output = .TRUE.
3155	CASE ( 'avs' )
3156	avs_output = .TRUE.
3157
3158	CASE DEFAULT
3159	message_string = 'unknown value for data_output_format "' // &
3160	TRIM( data_output_format(i) ) // '"'
3161	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3162
3163	END SELECT
3164
3165	i = i + 1
3166	IF ( i > 10 ) EXIT
3167
3168	ENDDO
3169	ENDIF
3170
3171	!
3172	!-- Set output format string (used in header)
3173	IF ( netcdf_output ) THEN
3174
3175	SELECT CASE ( netcdf_data_format )
3176	CASE ( 1 )
3177	output_format_netcdf = 'netCDF classic'
3178	CASE ( 2 )
3179	output_format_netcdf = 'netCDF 64bit offset'
3180	CASE ( 3 )
3181	output_format_netcdf = 'netCDF4/HDF5'
3182	CASE ( 4 )
3183	output_format_netcdf = 'netCDF4/HDF5 classic'
3184	CASE ( 5 )
3185	output_format_netcdf = 'parallel netCDF4/HDF5'
3186	CASE ( 6 )
3187	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3188
3189	END SELECT
3190
3191	ENDIF
3192
3193	!
3194	!-- Check mask conditions
3195	DO mid = 1, max_masks
3196	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3197	data_output_masks_user(mid,1) /= ' ' ) THEN
3198	masks = masks + 1
3199	ENDIF
3200	ENDDO
3201
3202	IF ( masks < 0 .OR. masks > max_masks ) THEN
3203	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3204	'<= ', max_masks, ' (=max_masks)'
3205	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3206	ENDIF
3207	IF ( masks > 0 ) THEN
3208	mask_scale(1) = mask_scale_x
3209	mask_scale(2) = mask_scale_y
3210	mask_scale(3) = mask_scale_z
3211	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3212	WRITE( message_string, * ) &
3213	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3214	'must be > 0.0'
3215	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3216	ENDIF
3217	!
3218	!-- Generate masks for masked data output
3219	CALL init_masks
3220	ENDIF
3221
3222	!
3223	!-- Check the NetCDF data format
3224	#if ! defined ( __check )
3225	IF ( netcdf_data_format > 2 ) THEN
3226	#if defined( __netcdf4 )
3227	CONTINUE
3228	#else
3229	message_string = 'netCDF: netCDF4 format requested but no ' // &
3230	'cpp-directive __netcdf4 given & switch ' // &
3231	'back to 64-bit offset format'
3232	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3233	netcdf_data_format = 2
3234	#endif
3235	ENDIF
3236	IF ( netcdf_data_format > 4 ) THEN
3237	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3238	CONTINUE
3239	#else
3240	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3241	'cpp-directive __netcdf4_parallel given & switch ' // &
3242	'back to netCDF4 non-parallel output'
3243	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3244	netcdf_data_format = netcdf_data_format - 2
3245	#endif
3246	ENDIF
3247	#endif
3248
3249	#if ! defined( __check )
3250	!
3251	!-- Check netcdf precison
3252	ldum = .FALSE.
3253	CALL define_netcdf_header( 'ch', ldum, 0 )
3254	#endif
3255	!
3256	!-- Check, whether a constant diffusion coefficient shall be used
3257	IF ( km_constant /= -1.0 ) THEN
3258	IF ( km_constant < 0.0 ) THEN
3259	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3260	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3261	ELSE
3262	IF ( prandtl_number < 0.0 ) THEN
3263	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3264	' < 0.0'
3265	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3266	ENDIF
3267	constant_diffusion = .TRUE.
3268
3269	IF ( prandtl_layer ) THEN
3270	message_string = 'prandtl_layer is not allowed with fixed ' // &
3271	'value of km'
3272	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3273	ENDIF
3274	ENDIF
3275	ENDIF
3276
3277	!
3278	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3279	!-- potential temperature, check the width of the damping layer
3280	IF ( bc_lr /= 'cyclic' ) THEN
3281	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3282	message_string = 'pt_damping_width out of range'
3283	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3284	ENDIF
3285	ENDIF
3286
3287	IF ( bc_ns /= 'cyclic' ) THEN
3288	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3289	message_string = 'pt_damping_width out of range'
3290	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3291	ENDIF
3292	ENDIF
3293
3294	!
3295	!-- Check value range for rif
3296	IF ( rif_min >= rif_max ) THEN
3297	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3298	'than rif_max = ', rif_max
3299	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3300	ENDIF
3301
3302	!
3303	!-- Determine upper and lower hight level indices for random perturbations
3304	IF ( disturbance_level_b == -9999999.9 ) THEN
3305	IF ( ocean ) THEN
3306	disturbance_level_b = zu((nzt*2)/3)
3307	disturbance_level_ind_b = ( nzt * 2 ) / 3
3308	ELSE
3309	disturbance_level_b = zu(nzb+3)
3310	disturbance_level_ind_b = nzb + 3
3311	ENDIF
3312	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3313	WRITE( message_string, * ) 'disturbance_level_b = ', &
3314	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3315	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3316	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3317	WRITE( message_string, * ) 'disturbance_level_b = ', &
3318	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3319	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3320	ELSE
3321	DO k = 3, nzt-2
3322	IF ( disturbance_level_b <= zu(k) ) THEN
3323	disturbance_level_ind_b = k
3324	EXIT
3325	ENDIF
3326	ENDDO
3327	ENDIF
3328
3329	IF ( disturbance_level_t == -9999999.9 ) THEN
3330	IF ( ocean ) THEN
3331	disturbance_level_t = zu(nzt-3)
3332	disturbance_level_ind_t = nzt - 3
3333	ELSE
3334	disturbance_level_t = zu(nzt/3)
3335	disturbance_level_ind_t = nzt / 3
3336	ENDIF
3337	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3338	WRITE( message_string, * ) 'disturbance_level_t = ', &
3339	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3340	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3341	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3342	WRITE( message_string, * ) 'disturbance_level_t = ', &
3343	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3344	disturbance_level_b
3345	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3346	ELSE
3347	DO k = 3, nzt-2
3348	IF ( disturbance_level_t <= zu(k) ) THEN
3349	disturbance_level_ind_t = k
3350	EXIT
3351	ENDIF
3352	ENDDO
3353	ENDIF
3354
3355	!
3356	!-- Check again whether the levels determined this way are ok.
3357	!-- Error may occur at automatic determination and too few grid points in
3358	!-- z-direction.
3359	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3360	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3361	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3362	disturbance_level_b
3363	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3364	ENDIF
3365
3366	!
3367	!-- Determine the horizontal index range for random perturbations.
3368	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3369	!-- near the inflow and the perturbation area is further limited to ...(1)
3370	!-- after the initial phase of the flow.
3371	dist_nxl = 0; dist_nxr = nx
3372	dist_nys = 0; dist_nyn = ny
3373	IF ( bc_lr /= 'cyclic' ) THEN
3374	IF ( inflow_disturbance_begin == -1 ) THEN
3375	inflow_disturbance_begin = MIN( 10, nx/2 )
3376	ENDIF
3377	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3378	THEN
3379	message_string = 'inflow_disturbance_begin out of range'
3380	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3381	ENDIF
3382	IF ( inflow_disturbance_end == -1 ) THEN
3383	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3384	ENDIF
3385	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3386	THEN
3387	message_string = 'inflow_disturbance_end out of range'
3388	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3389	ENDIF
3390	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3391	IF ( inflow_disturbance_begin == -1 ) THEN
3392	inflow_disturbance_begin = MIN( 10, ny/2 )
3393	ENDIF
3394	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3395	THEN
3396	message_string = 'inflow_disturbance_begin out of range'
3397	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3398	ENDIF
3399	IF ( inflow_disturbance_end == -1 ) THEN
3400	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3401	ENDIF
3402	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3403	THEN
3404	message_string = 'inflow_disturbance_end out of range'
3405	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3406	ENDIF
3407	ENDIF
3408
3409	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
3410	dist_nxr = nx - inflow_disturbance_begin
3411	dist_nxl(1) = nx - inflow_disturbance_end
3412	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
3413	dist_nxl = inflow_disturbance_begin
3414	dist_nxr(1) = inflow_disturbance_end
3415	ENDIF
3416	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
3417	dist_nyn = ny - inflow_disturbance_begin
3418	dist_nys(1) = ny - inflow_disturbance_end
3419	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
3420	dist_nys = inflow_disturbance_begin
3421	dist_nyn(1) = inflow_disturbance_end
3422	ENDIF
3423
3424	!
3425	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3426	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3427	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
3428	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3429	'condition at the inflow boundary'
3430	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3431	ENDIF
3432
3433	!
3434	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3435	!-- data from prerun in the first main run
3436	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3437	initializing_actions /= 'read_restart_data' ) THEN
3438	message_string = 'turbulent_inflow = .T. requires ' // &
3439	'initializing_actions = ''cyclic_fill'' '
3440	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3441	ENDIF
3442
3443	!
3444	!-- In case of turbulent inflow calculate the index of the recycling plane
3445	IF ( turbulent_inflow ) THEN
3446	IF ( recycling_width == 9999999.9 ) THEN
3447	!
3448	!-- Set the default value for the width of the recycling domain
3449	recycling_width = 0.1 * nx * dx
3450	ELSE
3451	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3452	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3453	' ', recycling_width
3454	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3455	ENDIF
3456	ENDIF
3457	!
3458	!-- Calculate the index
3459	recycling_plane = recycling_width / dx
3460	ENDIF
3461
3462	!
3463	!-- Check random generator
3464	IF ( random_generator /= 'system-specific' .AND. &
3465	random_generator /= 'numerical-recipes' ) THEN
3466	message_string = 'unknown random generator: random_generator = "' // &
3467	TRIM( random_generator ) // '"'
3468	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3469	ENDIF
3470
3471	!
3472	!-- Determine damping level index for 1D model
3473	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3474	IF ( damp_level_1d == -1.0 ) THEN
3475	damp_level_1d = zu(nzt+1)
3476	damp_level_ind_1d = nzt + 1
3477	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3478	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3479	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3480	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3481	ELSE
3482	DO k = 1, nzt+1
3483	IF ( damp_level_1d <= zu(k) ) THEN
3484	damp_level_ind_1d = k
3485	EXIT
3486	ENDIF
3487	ENDDO
3488	ENDIF
3489	ENDIF
3490
3491	!
3492	!-- Check some other 1d-model parameters
3493	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3494	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3495	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3496	'" is unknown'
3497	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3498	ENDIF
3499	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3500	TRIM( dissipation_1d ) /= 'detering' ) THEN
3501	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3502	'" is unknown'
3503	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3504	ENDIF
3505
3506	!
3507	!-- Set time for the next user defined restart (time_restart is the
3508	!-- internal parameter for steering restart events)
3509	IF ( restart_time /= 9999999.9 ) THEN
3510	IF ( restart_time > time_since_reference_point ) THEN
3511	time_restart = restart_time
3512	ENDIF
3513	ELSE
3514	!
3515	!-- In case of a restart run, set internal parameter to default (no restart)
3516	!-- if the NAMELIST-parameter restart_time is omitted
3517	time_restart = 9999999.9
3518	ENDIF
3519
3520	!
3521	!-- Set default value of the time needed to terminate a model run
3522	IF ( termination_time_needed == -1.0 ) THEN
3523	IF ( host(1:3) == 'ibm' ) THEN
3524	termination_time_needed = 300.0
3525	ELSE
3526	termination_time_needed = 35.0
3527	ENDIF
3528	ENDIF
3529
3530	!
3531	!-- Check the time needed to terminate a model run
3532	IF ( host(1:3) == 't3e' ) THEN
3533	!
3534	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3535	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3536	IF ( termination_time_needed <= 30.0 ) THEN
3537	WRITE( message_string, * ) 'termination_time_needed = ', &
3538	termination_time_needed, ' must be > 30.0 on host "', &
3539	TRIM( host ), '"'
3540	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3541	ENDIF
3542	ELSEIF ( host(1:3) == 'ibm' ) THEN
3543	!
3544	!-- On IBM-regatta machines the time should be at least 300 seconds,
3545	!-- because the job time consumed before executing palm (for compiling,
3546	!-- copying of files, etc.) has to be regarded
3547	IF ( termination_time_needed < 300.0 ) THEN
3548	WRITE( message_string, * ) 'termination_time_needed = ', &
3549	termination_time_needed, ' should be >= 300.0 on host "', &
3550	TRIM( host ), '"'
3551	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3552	ENDIF
3553	ENDIF
3554
3555	!
3556	!-- Check pressure gradient conditions
3557	IF ( dp_external .AND. conserve_volume_flow ) THEN
3558	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3559	'w are .TRUE. but one of them must be .FALSE.'
3560	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3561	ENDIF
3562	IF ( dp_external ) THEN
3563	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3564	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3565	' of range'
3566	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3567	ENDIF
3568	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3569	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3570	'ro, i.e. the external pressure gradient & will not be applied'
3571	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3572	ENDIF
3573	ENDIF
3574	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3575	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3576	'.FALSE., i.e. the external pressure gradient & will not be applied'
3577	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3578	ENDIF
3579	IF ( conserve_volume_flow ) THEN
3580	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3581
3582	conserve_volume_flow_mode = 'initial_profiles'
3583
3584	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3585	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3586	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3587	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3588	conserve_volume_flow_mode
3589	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3590	ENDIF
3591	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3592	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3593	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3594	'require conserve_volume_flow_mode = ''initial_profiles'''
3595	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3596	ENDIF
3597	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3598	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3599	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3600	'require conserve_volume_flow_mode = ''initial_profiles''', &
3601	' or ''bulk_velocity'''
3602	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3603	ENDIF
3604	ENDIF
3605	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3606	( .NOT. conserve_volume_flow .OR. &
3607	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3608	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3609	'conserve_volume_flow = .T. and ', &
3610	'conserve_volume_flow_mode = ''bulk_velocity'''
3611	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3612	ENDIF
3613
3614	!
3615	!-- Check particle attributes
3616	IF ( particle_color /= 'none' ) THEN
3617	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3618	particle_color /= 'z' ) THEN
3619	message_string = 'illegal value for parameter particle_color: ' // &
3620	TRIM( particle_color)
3621	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3622	ELSE
3623	IF ( color_interval(2) <= color_interval(1) ) THEN
3624	message_string = 'color_interval(2) <= color_interval(1)'
3625	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3626	ENDIF
3627	ENDIF
3628	ENDIF
3629
3630	IF ( particle_dvrpsize /= 'none' ) THEN
3631	IF ( particle_dvrpsize /= 'absw' ) THEN
3632	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3633	' ' // TRIM( particle_color)
3634	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3635	ELSE
3636	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3637	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3638	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3639	ENDIF
3640	ENDIF
3641	ENDIF
3642
3643	!
3644	!-- Check &userpar parameters
3645	CALL user_check_parameters
3646
3647
3648
3649	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1111

Download in other formats: