Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 783

Last change on this file since 783 was 775, checked in by letzel, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 130.2 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[775]	6	!
[667]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 775 2011-10-27 13:40:17Z heinze $
[687]	11	!
[775]	12	! 774 2011-10-27 13:34:16Z letzel
	13	! bugfix for prescribed u,v-profiles
	14	!
[768]	15	! 767 2011-10-14 06:39:12Z raasch
	16	! Calculating u,v-profiles from given profiles by linear interpolation.
	17	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	18	!
[708]	19	! 707 2011-03-29 11:39:40Z raasch
	20	! setting of bc_lr/ns_dirrad/raddir
	21	!
	22	! 689 2011-02-20 19:31:12z gryschka
[690]	23	! Bugfix for some logical expressions
	24	! (syntax was not compatible with all compilers)
[687]	25	!
[690]	26	! 680 2011-02-04 23:16:06Z gryschka
[681]	27	! init_vortex is not allowed with volume_flow_control
[668]	28	!
[674]	29	! 673 2011-01-18 16:19:48Z suehring
	30	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	31	!
[668]	32	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	33	! Exchange of parameters between ocean and atmosphere via PE0
	34	! Check for illegal combination of ws-scheme and timestep scheme.
	35	! Check for topography and ws-scheme.
	36	! Check for not cyclic boundary conditions in combination with ws-scheme and
	37	! loop_optimization = 'vector'.
	38	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	39	! Different processor/grid topology in atmosphere and ocean is now allowed!
	40	! Bugfixes in checking for conserve_volume_flow_mode
[601]	41	! 600 2010-11-24 16:10:51Z raasch
	42	! change due to new default value of surface_waterflux
[581]	43	! 580 2010-10-05 13:59:11Z heinze
[601]	44	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	45	!
[568]	46	! 567 2010-10-01 10:46:30Z helmke
	47	! calculating masks changed
	48	!
[565]	49	! 564 2010-09-30 13:18:59Z helmke
	50	! palm message identifiers of masked output changed, 20 replaced by max_masks
	51	!
[554]	52	! 553 2010-09-01 14:09:06Z weinreis
	53	! masks is calculated and removed from inipar
[532]	54	!
	55	! 531 2010-04-21 06:47:21Z heinze
	56	! Bugfix: unit of hyp changed to dbar
[392]	57	!
[525]	58	! 524 2010-03-30 02:04:51Z raasch
	59	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	60	!
[494]	61	! 493 2010-03-01 08:30:24Z raasch
	62	! netcdf_data_format is checked
	63	!
[449]	64	! 411 2009-12-11 14:15:58Z heinze
	65	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	66	! Initialization of large scale vertical motion (subsidence/ascent)
	67	!
	68	! 410 2009-12-04 17:05:40Z letzel
	69	! masked data output
	70	!
[392]	71	! 388 2009-09-23 09:40:33Z raasch
[388]	72	! Check profiles fpr prho and hyp.
[376]	73	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	74	! interval has been set, respective error message is included
[366]	75	! bc_lr_cyc and bc_ns_cyc are set,
[328]	76	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	77	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	78	! Coupling with independent precursor runs.
[264]	79	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	80	! Bugfix: pressure included for profile output
[240]	81	! Check pressure gradient conditions
[256]	82	! topography_grid_convention moved from user_check_parameters
	83	! 'single_street_canyon'
[367]	84	! Added shf* and qsws* to the list of available output data
[226]	85	!
	86	! 222 2009-01-12 16:04:16Z letzel
[217]	87	! +user_check_parameters
[213]	88	! Output of messages replaced by message handling routine.
[206]	89	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	90	! deleted __mpi2 directives
[222]	91	! Check that PALM is called with mrun -K parallel for coupling
[198]	92	!
	93	! 197 2008-09-16 15:29:03Z raasch
[177]	94	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	95	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	96	!
	97	! Strict grid matching along z is not needed for mg-solver.
[153]	98	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	99	! Case of reading data for recycling included in initializing_actions,
[197]	100	! check of turbulent_inflow and calculation of recycling_plane.
	101	! q*2 profile added
[139]	102	!
	103	! 138 2007-11-28 10:03:58Z letzel
[138]	104	! Plant canopy added
[132]	105	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	106	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	107	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	108	!
	109	! 109 2007-08-28 15:26:47Z letzel
[102]	110	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	111	! conditions for temperature and fluxes) in case of coupled runs.
	112	! +profiles for wp and w"e
[104]	113	! Bugfix: Error message concerning output of particle concentration (pc)
	114	! modified
[108]	115	! More checks and more default values for coupled runs
	116	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	117	! cloud_physics = .T.)
	118	! Rayleigh damping for ocean fixed.
[109]	119	! Check and, if necessary, set default value for dt_coupling
[98]	120	!
	121	! 97 2007-06-21 08:23:15Z raasch
[97]	122	! Initial salinity profile is calculated, salinity boundary conditions are
	123	! checked,
[94]	124	! z_max_do1d is checked only in case of ocean = .f.,
[97]	125	! +initial temperature and geostrophic velocity profiles for the ocean version,
	126	! use_pt_reference renamed use_reference
[77]	127	!
[90]	128	! 89 2007-05-25 12:08:31Z raasch
	129	! Check for user-defined profiles
	130	!
[77]	131	! 75 2007-03-22 09:54:05Z raasch
[51]	132	! "by_user" allowed as initializing action, -data_output_ts,
[63]	133	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	134	! and pt_reference are checked, moisture renamed humidity,
[72]	135	! output of precipitation amount/rate and roughnes length + check
[73]	136	! possible negative humidities are avoided in initial profile,
[75]	137	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	138	! revision added to run_description_header
[1]	139	!
[39]	140	! 20 2007-02-26 00:12:32Z raasch
	141	! Temperature and humidity gradients at top are now calculated for nzt+1,
	142	! top_heatflux and respective boundary condition bc_pt_t is checked
	143	!
[3]	144	! RCS Log replace by Id keyword, revision history cleaned up
	145	!
[1]	146	! Revision 1.61 2006/08/04 14:20:25 raasch
	147	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	148	! use_upstream_for_tke, default value for dt_dopts,
	149	! generation of file header moved from routines palm and header to here
	150	!
	151	! Revision 1.1 1997/08/26 06:29:23 raasch
	152	! Initial revision
	153	!
	154	!
	155	! Description:
	156	! ------------
	157	! Check control parameters and deduce further quantities.
	158	!------------------------------------------------------------------------------!
	159
	160	USE arrays_3d
	161	USE constants
	162	USE control_parameters
[264]	163	USE dvrp_variables
[1]	164	USE grid_variables
	165	USE indices
	166	USE model_1d
	167	USE netcdf_control
	168	USE particle_attributes
	169	USE pegrid
	170	USE profil_parameter
[411]	171	USE subsidence_mod
[1]	172	USE statistics
	173	USE transpose_indices
	174
	175	IMPLICIT NONE
	176
	177	CHARACTER (LEN=1) :: sq
	178	CHARACTER (LEN=6) :: var
	179	CHARACTER (LEN=7) :: unit
	180	CHARACTER (LEN=8) :: date
	181	CHARACTER (LEN=10) :: time
[102]	182	CHARACTER (LEN=40) :: coupling_string
[1]	183	CHARACTER (LEN=100) :: action
	184
[767]	185	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	186	position, prec
[1]	187	LOGICAL :: found, ldum
[291]	188	REAL :: gradient, maxn, maxp, remote = 0.0, &
	189	simulation_time_since_reference
[1]	190
	191	!
	192	!-- Warning, if host is not set
	193	IF ( host(1:1) == ' ' ) THEN
[213]	194	message_string = '"host" is not set. Please check that environment ' // &
	195	'variable "localhost" & is set before running PALM'
[226]	196	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	197	ENDIF
	198
	199	!
[102]	200	!-- Check the coupling mode
	201	IF ( coupling_mode /= 'uncoupled' .AND. &
	202	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	203	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	204	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	205	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	206	ENDIF
	207
	208	!
[108]	209	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	210	IF ( coupling_mode /= 'uncoupled') THEN
[213]	211
[108]	212	IF ( dt_coupling == 9999999.9 ) THEN
[213]	213	message_string = 'dt_coupling is not set but required for coup' // &
	214	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	215	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	216	ENDIF
[213]	217
[206]	218	#if defined( __parallel )
[667]	219	IF ( myid == 0 ) THEN
	220	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	221	ierr )
	222	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	223	status, ierr )
	224	ENDIF
	225	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	226
[108]	227	IF ( dt_coupling /= remote ) THEN
[213]	228	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	229	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	230	'dt_coupling_remote = ', remote
[226]	231	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	232	ENDIF
[109]	233	IF ( dt_coupling <= 0.0 ) THEN
[667]	234	IF ( myid == 0 ) THEN
	235	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	236	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	237	status, ierr )
	238	ENDIF
	239	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	240
[109]	241	dt_coupling = MAX( dt_max, remote )
[213]	242	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	243	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	244	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	245	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	246	ENDIF
[667]	247	IF ( myid == 0 ) THEN
	248	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	249	ierr )
	250	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	251	status, ierr )
	252	ENDIF
	253	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	254
[108]	255	IF ( restart_time /= remote ) THEN
[213]	256	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	257	'": restart_time = ', restart_time, '& is not equal to ', &
	258	'restart_time_remote = ', remote
[226]	259	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	260	ENDIF
[667]	261	IF ( myid == 0 ) THEN
	262	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	263	ierr )
	264	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	265	status, ierr )
	266	ENDIF
	267	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	268
[108]	269	IF ( dt_restart /= remote ) THEN
[213]	270	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	271	'": dt_restart = ', dt_restart, '& is not equal to ', &
	272	'dt_restart_remote = ', remote
[226]	273	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	274	ENDIF
[213]	275
[291]	276	simulation_time_since_reference = end_time - coupling_start_time
[667]	277	IF ( myid == 0 ) THEN
	278	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	279	14, comm_inter, ierr )
	280	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	281	status, ierr )
	282	ENDIF
	283	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	284
[291]	285	IF ( simulation_time_since_reference /= remote ) THEN
[213]	286	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	287	'": simulation_time_since_reference = ', &
	288	simulation_time_since_reference, '& is not equal to ', &
	289	'simulation_time_since_reference_remote = ', remote
[226]	290	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	291	ENDIF
[213]	292
[667]	293
	294	IF ( myid == 0 ) THEN
	295	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	296	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	297	status, ierr )
[108]	298	ENDIF
[667]	299	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	300
[667]	301
	302	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	303
	304	IF ( dx < remote ) THEN
	305	WRITE( message_string, * ) 'coupling mode "', &
	306	TRIM( coupling_mode ), &
	307	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	308	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	309	ENDIF
	310
	311	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	312	WRITE( message_string, * ) 'coupling mode "', &
	313	TRIM( coupling_mode ), &
	314	'": Domain size in x-direction is not equal in ocean and atmosphere'
	315	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	316	ENDIF
	317
[108]	318	ENDIF
[213]	319
[667]	320	IF ( myid == 0) THEN
	321	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	322	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	323	status, ierr )
[108]	324	ENDIF
[667]	325	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	326
[667]	327	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	328
	329	IF ( dy < remote ) THEN
	330	WRITE( message_string, * ) 'coupling mode "', &
	331	TRIM( coupling_mode ), &
	332	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	333	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	334	ENDIF
	335
	336	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	337	WRITE( message_string, * ) 'coupling mode "', &
	338	TRIM( coupling_mode ), &
	339	'": Domain size in y-direction is not equal in ocean and atmosphere'
	340	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	341	ENDIF
	342
	343	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	344	WRITE( message_string, * ) 'coupling mode "', &
	345	TRIM( coupling_mode ), &
	346	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	347	' atmosphere'
	348	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	349	ENDIF
	350
	351	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	352	WRITE( message_string, * ) 'coupling mode "', &
	353	TRIM( coupling_mode ), &
	354	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	355	' atmosphere'
	356	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	357	ENDIF
	358
[108]	359	ENDIF
[222]	360	#else
	361	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	362	' ''mrun -K parallel'''
[226]	363	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	364	#endif
	365	ENDIF
	366
[206]	367	#if defined( __parallel )
[108]	368	!
	369	!-- Exchange via intercommunicator
[667]	370	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	371	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	372	ierr )
[667]	373	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	374	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	375	comm_inter, status, ierr )
[108]	376	ENDIF
[667]	377	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	378
[108]	379	#endif
	380
	381
	382	!
[1]	383	!-- Generate the file header which is used as a header for most of PALM's
	384	!-- output files
	385	CALL DATE_AND_TIME( date, time )
	386	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	387	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	388	IF ( coupling_mode == 'uncoupled' ) THEN
	389	coupling_string = ''
	390	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	391	coupling_string = ' coupled (atmosphere)'
	392	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	393	coupling_string = ' coupled (ocean)'
	394	ENDIF
[1]	395
[102]	396	WRITE ( run_description_header, &
	397	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	398	TRIM( version ), TRIM( revision ), 'run: ', &
	399	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	400	'host: ', TRIM( host ), run_date, run_time
[1]	401
	402	!
[63]	403	!-- Check the general loop optimization method
	404	IF ( loop_optimization == 'default' ) THEN
	405	IF ( host(1:3) == 'nec' ) THEN
	406	loop_optimization = 'vector'
	407	ELSE
	408	loop_optimization = 'cache'
	409	ENDIF
	410	ENDIF
	411	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	412	.AND. loop_optimization /= 'vector' ) THEN
[213]	413	message_string = 'illegal value given for loop_optimization: "' // &
	414	TRIM( loop_optimization ) // '"'
[226]	415	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	416	ENDIF
	417
	418	!
[1]	419	!-- Check topography setting (check for illegal parameter combinations)
	420	IF ( topography /= 'flat' ) THEN
	421	action = ' '
	422	IF ( scalar_advec /= 'pw-scheme' ) THEN
	423	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	424	ENDIF
	425	IF ( momentum_advec /= 'pw-scheme' ) THEN
	426	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	427	ENDIF
[51]	428	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	429	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	430	ENDIF
[114]	431	IF ( psolver == 'sor' ) THEN
[1]	432	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	433	ENDIF
	434	IF ( sloping_surface ) THEN
	435	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	436	ENDIF
	437	IF ( galilei_transformation ) THEN
	438	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	439	ENDIF
	440	IF ( cloud_physics ) THEN
	441	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	442	ENDIF
	443	IF ( cloud_droplets ) THEN
	444	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	445	ENDIF
	446	IF ( .NOT. prandtl_layer ) THEN
	447	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	448	ENDIF
	449	IF ( action /= ' ' ) THEN
[213]	450	message_string = 'a non-flat topography does not allow ' // &
	451	TRIM( action )
[226]	452	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	453	ENDIF
[667]	454	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	455	THEN
	456	message_string = 'topography is still not allowed with ' // &
	457	'momentum_advec = "' // TRIM( momentum_advec ) // &
	458	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
	459	! message number still needs modification
	460	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
	461	END IF
	462
[256]	463	!
	464	!-- In case of non-flat topography, check whether the convention how to
	465	!-- define the topography grid has been set correctly, or whether the default
	466	!-- is applicable. If this is not possible, abort.
	467	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	468	IF ( TRIM( topography ) /= 'single_building' .AND. &
	469	TRIM( topography ) /= 'single_street_canyon' .AND. &
	470	TRIM( topography ) /= 'read_from_file' ) THEN
	471	!-- The default value is not applicable here, because it is only valid
	472	!-- for the two standard cases 'single_building' and 'read_from_file'
	473	!-- defined in init_grid.
	474	WRITE( message_string, * ) &
	475	'The value for "topography_grid_convention" ', &
	476	'is not set. Its default value is & only valid for ', &
	477	'"topography" = ''single_building'', ', &
	478	'''single_street_canyon'' & or ''read_from_file''.', &
	479	' & Choose ''cell_edge'' or ''cell_center''.'
	480	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	481	ELSE
	482	!-- The default value is applicable here.
	483	!-- Set convention according to topography.
	484	IF ( TRIM( topography ) == 'single_building' .OR. &
	485	TRIM( topography ) == 'single_street_canyon' ) THEN
	486	topography_grid_convention = 'cell_edge'
	487	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	488	topography_grid_convention = 'cell_center'
	489	ENDIF
	490	ENDIF
	491	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	492	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	493	WRITE( message_string, * ) &
	494	'The value for "topography_grid_convention" is ', &
	495	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	496	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	497	ENDIF
	498
[1]	499	ENDIF
[94]	500
[1]	501	!
[94]	502	!-- Check ocean setting
	503	IF ( ocean ) THEN
[332]	504
[94]	505	action = ' '
	506	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	507	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	508	ENDIF
[97]	509	IF ( momentum_advec == 'ups-scheme' ) THEN
	510	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	511	ENDIF
[94]	512	IF ( action /= ' ' ) THEN
[213]	513	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	514	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	515	ENDIF
	516
[332]	517	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	518	TRIM( coupling_char ) == '_O' ) THEN
[343]	519
[94]	520	!
[332]	521	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	522	!-- ocean run (this setting is done via mrun-option -y)
[343]	523
[291]	524	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	525	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	526	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	527
[291]	528	ENDIF
	529
	530	!
[1]	531	!-- Check whether there are any illegal values
	532	!-- Pressure solver:
	533	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	534	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	535	message_string = 'unknown solver for perturbation pressure: psolver' // &
	536	' = "' // TRIM( psolver ) // '"'
[226]	537	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	538	ENDIF
	539
	540	#if defined( __parallel )
	541	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	542	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	543	'for a 1d domain-decomposition along x & please do' // &
	544	' not set npey/=1 in the parameter file'
[226]	545	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	546	ENDIF
[181]	547	IF ( psolver == 'poisfft_hybrid' .AND. &
	548	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	549	psolver == 'multigrid' .AND. &
	550	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	551	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	552	'work for subdomains with unequal size & please ' // &
	553	'set grid_matching = ''strict'' in the parameter file'
[226]	554	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	555	ENDIF
	556	#else
	557	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	558	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	559	' for a parallel environment'
[226]	560	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	561	ENDIF
	562	#endif
	563
	564	IF ( psolver == 'multigrid' ) THEN
	565	IF ( cycle_mg == 'w' ) THEN
	566	gamma_mg = 2
	567	ELSEIF ( cycle_mg == 'v' ) THEN
	568	gamma_mg = 1
	569	ELSE
[213]	570	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	571	TRIM( cycle_mg ) // '"'
[226]	572	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	573	ENDIF
	574	ENDIF
	575
	576	IF ( fft_method /= 'singleton-algorithm' .AND. &
	577	fft_method /= 'temperton-algorithm' .AND. &
	578	fft_method /= 'system-specific' ) THEN
[213]	579	message_string = 'unknown fft-algorithm: fft_method = "' // &
	580	TRIM( fft_method ) // '"'
[226]	581	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	582	ENDIF
[667]	583
	584	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	585	.NOT. call_psolver_at_all_substeps ) THEN
[667]	586	message_string = 'psolver must be called at each RK3 substep when "'//&
	587	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	588	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	589	END IF
[1]	590	!
	591	!-- Advection schemes:
[673]	592	!
	593	!-- Set the LOGICALS to enhance the performance.
	594	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	595	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	596
[667]	597	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	598	momentum_advec /= 'ups-scheme' ) THEN
[214]	599	message_string = 'unknown advection scheme: momentum_advec = "' // &
	600	TRIM( momentum_advec ) // '"'
[226]	601	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	602	ENDIF
[667]	603	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	604	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	605	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	606	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	607	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	608	message_string = 'momentum_advec or scalar_advec = "' &
	609	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	610	TRIM( timestep_scheme ) // '"'
[226]	611	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	612	ENDIF
[667]	613	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	614	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	615	message_string = 'unknown advection scheme: scalar_advec = "' // &
	616	TRIM( scalar_advec ) // '"'
[226]	617	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	618	ENDIF
	619
	620	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	621	use_upstream_for_tke = .TRUE.
[214]	622	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	623	'use_sgs_for_particles = .TRUE.'
[226]	624	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	625	ENDIF
	626
	627	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	628	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	629	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	630	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	631	ENDIF
	632
	633	!
	634	!-- Timestep schemes:
	635	SELECT CASE ( TRIM( timestep_scheme ) )
	636
	637	CASE ( 'euler' )
	638	intermediate_timestep_count_max = 1
	639	asselin_filter_factor = 0.0
	640
	641	CASE ( 'leapfrog', 'leapfrog+euler' )
	642	intermediate_timestep_count_max = 1
	643
	644	CASE ( 'runge-kutta-2' )
	645	intermediate_timestep_count_max = 2
	646	asselin_filter_factor = 0.0
	647
	648	CASE ( 'runge-kutta-3' )
	649	intermediate_timestep_count_max = 3
	650	asselin_filter_factor = 0.0
	651
	652	CASE DEFAULT
[214]	653	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	654	TRIM( timestep_scheme ) // '"'
[226]	655	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	656
	657	END SELECT
	658
[63]	659	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	660	THEN
[214]	661	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	662	'" & does not work with timestep_scheme "' // &
	663	TRIM( timestep_scheme ) // '"'
[226]	664	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	665	ENDIF
	666
[667]	667	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	668	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	669	message_string = 'momentum advection scheme "' // &
	670	TRIM( momentum_advec ) // '" & does not work with ' // &
	671	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	672	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	673	ENDIF
	674
[147]	675	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	676	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	677	!
[214]	678	!-- No restart run: several initialising actions are possible
[1]	679	action = initializing_actions
	680	DO WHILE ( TRIM( action ) /= '' )
	681	position = INDEX( action, ' ' )
	682	SELECT CASE ( action(1:position-1) )
	683
	684	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	685	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	686	action = action(position+1:)
	687
	688	CASE DEFAULT
[214]	689	message_string = 'initializing_action = "' // &
	690	TRIM( action ) // '" unkown or not allowed'
[226]	691	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	692
	693	END SELECT
	694	ENDDO
	695	ENDIF
[214]	696
[680]	697	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	698	conserve_volume_flow ) THEN
	699	message_string = 'initializing_actions = "initialize_vortex"' // &
	700	' ist not allowed with conserve_volume_flow = .T.'
	701	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	702	ENDIF
	703
	704
[1]	705	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	706	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	707	message_string = 'initializing_actions = "set_constant_profiles"' // &
	708	' and "set_1d-model_profiles" are not allowed ' // &
	709	'simultaneously'
[226]	710	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	711	ENDIF
[214]	712
[46]	713	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	714	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	715	message_string = 'initializing_actions = "set_constant_profiles"' // &
	716	' and "by_user" are not allowed simultaneously'
[226]	717	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	718	ENDIF
[214]	719
[46]	720	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	721	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	722	message_string = 'initializing_actions = "by_user" and ' // &
	723	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	724	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	725	ENDIF
[1]	726
[75]	727	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	728	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	729	'not allowed with humidity = ', humidity
[226]	730	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	731	ENDIF
	732
[72]	733	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	734	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	735	'not allowed with cloud_physics = ', cloud_physics
[226]	736	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	737	ENDIF
	738
[75]	739	IF ( humidity .AND. sloping_surface ) THEN
[214]	740	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	741	'are not allowed simultaneously'
[226]	742	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	743	ENDIF
	744
[75]	745	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	746	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	747	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	748	ENDIF
	749
[75]	750	IF ( passive_scalar .AND. humidity ) THEN
[214]	751	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	752	'is not allowed simultaneously'
[226]	753	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	754	ENDIF
	755
	756	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	757	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	758	' = .TRUE.'
[226]	759	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	760	ENDIF
	761
	762	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	763	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	764	'" found for parameter grid_matching'
[226]	765	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	766	ENDIF
	767
[138]	768	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	769	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	770	'coefficient & given value is drag_coefficient = 0.0'
[226]	771	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	772	ENDIF
	773
[1]	774	!
	775	!-- In case of no model continuation run, check initialising parameters and
	776	!-- deduce further quantities
	777	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	778
	779	!
[767]	780	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	781	pt_init = pt_surface
[94]	782	IF ( humidity ) q_init = q_surface
	783	IF ( ocean ) sa_init = sa_surface
	784	IF ( passive_scalar ) q_init = s_surface
[138]	785	IF ( plant_canopy ) lad = 0.0
[1]	786
	787	!
	788	!--
	789	!-- If required, compute initial profile of the geostrophic wind
	790	!-- (component ug)
	791	i = 1
	792	gradient = 0.0
[97]	793
	794	IF ( .NOT. ocean ) THEN
	795
	796	ug_vertical_gradient_level_ind(1) = 0
	797	ug(0) = ug_surface
	798	DO k = 1, nzt+1
[177]	799	IF ( i < 11 ) THEN
	800	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	801	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	802	gradient = ug_vertical_gradient(i) / 100.0
	803	ug_vertical_gradient_level_ind(i) = k - 1
	804	i = i + 1
[1]	805	ENDIF
[177]	806	ENDIF
[97]	807	IF ( gradient /= 0.0 ) THEN
	808	IF ( k /= 1 ) THEN
	809	ug(k) = ug(k-1) + dzu(k) * gradient
	810	ELSE
	811	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	812	ENDIF
[1]	813	ELSE
[97]	814	ug(k) = ug(k-1)
[1]	815	ENDIF
[97]	816	ENDDO
[1]	817
[97]	818	ELSE
	819
	820	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	821	ug(nzt+1) = ug_surface
[667]	822	DO k = nzt, nzb, -1
[177]	823	IF ( i < 11 ) THEN
	824	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	825	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	826	gradient = ug_vertical_gradient(i) / 100.0
	827	ug_vertical_gradient_level_ind(i) = k + 1
	828	i = i + 1
[97]	829	ENDIF
	830	ENDIF
	831	IF ( gradient /= 0.0 ) THEN
	832	IF ( k /= nzt ) THEN
	833	ug(k) = ug(k+1) - dzu(k+1) * gradient
	834	ELSE
	835	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	836	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	837	ENDIF
	838	ELSE
	839	ug(k) = ug(k+1)
	840	ENDIF
	841	ENDDO
	842
	843	ENDIF
	844
[1]	845	!
[767]	846	!-- In case of no given gradients for ug, choose a zero gradient
[97]	847	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	848	ug_vertical_gradient_level(1) = 0.0
	849	ENDIF
	850
	851	!
	852	!--
	853	!-- If required, compute initial profile of the geostrophic wind
	854	!-- (component vg)
	855	i = 1
	856	gradient = 0.0
[97]	857
	858	IF ( .NOT. ocean ) THEN
	859
	860	vg_vertical_gradient_level_ind(1) = 0
	861	vg(0) = vg_surface
	862	DO k = 1, nzt+1
[177]	863	IF ( i < 11 ) THEN
	864	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	865	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	866	gradient = vg_vertical_gradient(i) / 100.0
	867	vg_vertical_gradient_level_ind(i) = k - 1
	868	i = i + 1
[1]	869	ENDIF
	870	ENDIF
[97]	871	IF ( gradient /= 0.0 ) THEN
	872	IF ( k /= 1 ) THEN
	873	vg(k) = vg(k-1) + dzu(k) * gradient
	874	ELSE
	875	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	876	ENDIF
[1]	877	ELSE
[97]	878	vg(k) = vg(k-1)
[1]	879	ENDIF
[97]	880	ENDDO
[1]	881
[97]	882	ELSE
	883
[121]	884	vg_vertical_gradient_level_ind(1) = nzt+1
	885	vg(nzt+1) = vg_surface
[667]	886	DO k = nzt, nzb, -1
[177]	887	IF ( i < 11 ) THEN
	888	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	889	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	890	gradient = vg_vertical_gradient(i) / 100.0
	891	vg_vertical_gradient_level_ind(i) = k + 1
	892	i = i + 1
[97]	893	ENDIF
	894	ENDIF
	895	IF ( gradient /= 0.0 ) THEN
	896	IF ( k /= nzt ) THEN
	897	vg(k) = vg(k+1) - dzu(k+1) * gradient
	898	ELSE
	899	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	900	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	901	ENDIF
	902	ELSE
	903	vg(k) = vg(k+1)
	904	ENDIF
	905	ENDDO
	906
	907	ENDIF
	908
[1]	909	!
[767]	910	!-- In case of no given gradients for vg, choose a zero gradient
[97]	911	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	912	vg_vertical_gradient_level(1) = 0.0
	913	ENDIF
	914
	915	!
[767]	916	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	917	!-- interpolate them from wind profile data (if given)
	918	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	919
	920	u_init = ug
	921	v_init = vg
	922
	923	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	924
	925	IF ( uv_heights(1) /= 0.0 ) THEN
	926	message_string = 'uv_heights(1) must be 0.0'
	927	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	928	ENDIF
	929
	930	use_prescribed_profile_data = .TRUE.
	931
	932	kk = 1
	933	u_init(0) = 0.0
	934	v_init(0) = 0.0
	935
	936	DO k = 1, nz+1
	937
	938	IF ( kk < 100 ) THEN
	939	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	940	kk = kk + 1
	941	IF ( kk == 100 ) EXIT
	942	ENDDO
	943	ENDIF
	944
[774]	945	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	946	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	947	( uv_heights(kk+1) - uv_heights(kk) ) * &
	948	( u_profile(kk+1) - u_profile(kk) )
	949	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	950	( uv_heights(kk+1) - uv_heights(kk) ) * &
	951	( v_profile(kk+1) - v_profile(kk) )
	952	ELSE
	953	u_init(k) = u_profile(kk)
	954	v_init(k) = v_profile(kk)
	955	ENDIF
	956
	957	ENDDO
	958
	959	ELSE
	960
	961	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	962	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	963
	964	ENDIF
	965
	966	!
[94]	967	!-- Compute initial temperature profile using the given temperature gradients
[1]	968	i = 1
	969	gradient = 0.0
[94]	970
	971	IF ( .NOT. ocean ) THEN
	972
	973	pt_vertical_gradient_level_ind(1) = 0
	974	DO k = 1, nzt+1
[177]	975	IF ( i < 11 ) THEN
	976	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	977	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	978	gradient = pt_vertical_gradient(i) / 100.0
	979	pt_vertical_gradient_level_ind(i) = k - 1
	980	i = i + 1
[1]	981	ENDIF
	982	ENDIF
[94]	983	IF ( gradient /= 0.0 ) THEN
	984	IF ( k /= 1 ) THEN
	985	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	986	ELSE
	987	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	988	ENDIF
[1]	989	ELSE
[94]	990	pt_init(k) = pt_init(k-1)
[1]	991	ENDIF
[94]	992	ENDDO
[1]	993
[94]	994	ELSE
	995
	996	pt_vertical_gradient_level_ind(1) = nzt+1
	997	DO k = nzt, 0, -1
[177]	998	IF ( i < 11 ) THEN
	999	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1000	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1001	gradient = pt_vertical_gradient(i) / 100.0
	1002	pt_vertical_gradient_level_ind(i) = k + 1
	1003	i = i + 1
[94]	1004	ENDIF
	1005	ENDIF
	1006	IF ( gradient /= 0.0 ) THEN
	1007	IF ( k /= nzt ) THEN
	1008	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1009	ELSE
	1010	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1011	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1012	ENDIF
	1013	ELSE
	1014	pt_init(k) = pt_init(k+1)
	1015	ENDIF
	1016	ENDDO
	1017
	1018	ENDIF
	1019
[1]	1020	!
	1021	!-- In case of no given temperature gradients, choose gradient of neutral
	1022	!-- stratification
[94]	1023	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1024	pt_vertical_gradient_level(1) = 0.0
	1025	ENDIF
	1026
	1027	!
[94]	1028	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1029	!-- boundary condition
[19]	1030	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1031
	1032	!
	1033	!-- If required, compute initial humidity or scalar profile using the given
	1034	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1035	!-- values of the scalar parameters on humidity parameters
	1036	IF ( passive_scalar ) THEN
	1037	bc_q_b = bc_s_b
	1038	bc_q_t = bc_s_t
	1039	q_surface = s_surface
	1040	q_surface_initial_change = s_surface_initial_change
	1041	q_vertical_gradient = s_vertical_gradient
	1042	q_vertical_gradient_level = s_vertical_gradient_level
	1043	surface_waterflux = surface_scalarflux
[407]	1044	wall_humidityflux = wall_scalarflux
[1]	1045	ENDIF
	1046
[75]	1047	IF ( humidity .OR. passive_scalar ) THEN
[1]	1048
	1049	i = 1
	1050	gradient = 0.0
	1051	q_vertical_gradient_level_ind(1) = 0
	1052	DO k = 1, nzt+1
[177]	1053	IF ( i < 11 ) THEN
	1054	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1055	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1056	gradient = q_vertical_gradient(i) / 100.0
	1057	q_vertical_gradient_level_ind(i) = k - 1
	1058	i = i + 1
[1]	1059	ENDIF
	1060	ENDIF
	1061	IF ( gradient /= 0.0 ) THEN
	1062	IF ( k /= 1 ) THEN
	1063	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1064	ELSE
	1065	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1066	ENDIF
	1067	ELSE
	1068	q_init(k) = q_init(k-1)
	1069	ENDIF
[72]	1070	!
	1071	!-- Avoid negative humidities
	1072	IF ( q_init(k) < 0.0 ) THEN
	1073	q_init(k) = 0.0
	1074	ENDIF
[1]	1075	ENDDO
	1076
	1077	!
	1078	!-- In case of no given humidity gradients, choose zero gradient
	1079	!-- conditions
	1080	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1081	q_vertical_gradient_level(1) = 0.0
	1082	ENDIF
	1083
	1084	!
	1085	!-- Store humidity gradient at the top boundary for possile Neumann
	1086	!-- boundary condition
[19]	1087	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1088
	1089	ENDIF
	1090
[94]	1091	!
	1092	!-- If required, compute initial salinity profile using the given salinity
	1093	!-- gradients
	1094	IF ( ocean ) THEN
	1095
	1096	i = 1
	1097	gradient = 0.0
	1098
	1099	sa_vertical_gradient_level_ind(1) = nzt+1
	1100	DO k = nzt, 0, -1
[177]	1101	IF ( i < 11 ) THEN
	1102	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1103	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1104	gradient = sa_vertical_gradient(i) / 100.0
	1105	sa_vertical_gradient_level_ind(i) = k + 1
	1106	i = i + 1
[94]	1107	ENDIF
	1108	ENDIF
	1109	IF ( gradient /= 0.0 ) THEN
	1110	IF ( k /= nzt ) THEN
	1111	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1112	ELSE
	1113	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1114	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1115	ENDIF
	1116	ELSE
	1117	sa_init(k) = sa_init(k+1)
	1118	ENDIF
	1119	ENDDO
	1120
	1121	ENDIF
	1122
[138]	1123	!
[388]	1124	!-- If required compute the profile of leaf area density used in the plant
	1125	!-- canopy model
[138]	1126	IF ( plant_canopy ) THEN
	1127
	1128	i = 1
	1129	gradient = 0.0
[1]	1130
[138]	1131	IF ( .NOT. ocean ) THEN
[153]	1132
	1133	lad(0) = lad_surface
[138]	1134
	1135	lad_vertical_gradient_level_ind(1) = 0
	1136	DO k = 1, pch_index
[177]	1137	IF ( i < 11 ) THEN
	1138	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1139	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1140	gradient = lad_vertical_gradient(i)
	1141	lad_vertical_gradient_level_ind(i) = k - 1
	1142	i = i + 1
[138]	1143	ENDIF
	1144	ENDIF
	1145	IF ( gradient /= 0.0 ) THEN
	1146	IF ( k /= 1 ) THEN
	1147	lad(k) = lad(k-1) + dzu(k) * gradient
	1148	ELSE
	1149	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1150	ENDIF
	1151	ELSE
	1152	lad(k) = lad(k-1)
	1153	ENDIF
	1154	ENDDO
	1155
	1156	ENDIF
	1157
[1]	1158	!
[388]	1159	!-- In case of no given leaf area density gradients, choose a vanishing
	1160	!-- gradient
[138]	1161	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1162	lad_vertical_gradient_level(1) = 0.0
	1163	ENDIF
	1164
	1165	ENDIF
	1166
	1167	ENDIF
[411]	1168
	1169	!
	1170	!-- Initialize large scale subsidence if required
[580]	1171	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1172	large_scale_subsidence = .TRUE.
	1173	CALL init_w_subsidence
	1174	END IF
	1175
[138]	1176
[667]	1177
[138]	1178	!
[1]	1179	!-- Compute Coriolis parameter
	1180	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1181	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1182
	1183	!
[97]	1184	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1185	!-- set the reference temperature equal to the surface temperature.
	1186	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1187
	1188	!
[97]	1189	!-- Reference value has to be used in buoyancy terms
	1190	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1191
	1192	!
	1193	!-- Sign of buoyancy/stability terms
	1194	IF ( ocean ) atmos_ocean_sign = -1.0
	1195
	1196	!
[108]	1197	!-- Ocean version must use flux boundary conditions at the top
	1198	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1199	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1200	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1201	ENDIF
[97]	1202
	1203	!
[1]	1204	!-- In case of a given slope, compute the relevant quantities
	1205	IF ( alpha_surface /= 0.0 ) THEN
	1206	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1207	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1208	' ) must be < 90.0'
[226]	1209	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1210	ENDIF
	1211	sloping_surface = .TRUE.
	1212	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1213	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1214	ENDIF
	1215
	1216	!
	1217	!-- Check time step and cfl_factor
	1218	IF ( dt /= -1.0 ) THEN
	1219	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1220	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1221	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1222	ENDIF
	1223	dt_3d = dt
	1224	dt_fixed = .TRUE.
	1225	ENDIF
	1226
	1227	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1228	IF ( cfl_factor == -1.0 ) THEN
	1229	IF ( momentum_advec == 'ups-scheme' .OR. &
	1230	scalar_advec == 'ups-scheme' ) THEN
	1231	cfl_factor = 0.8
	1232	ELSE
	1233	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1234	cfl_factor = 0.8
	1235	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1236	cfl_factor = 0.9
	1237	ELSE
	1238	cfl_factor = 0.1
	1239	ENDIF
	1240	ENDIF
	1241	ELSE
[215]	1242	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1243	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1244	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1245	ENDIF
	1246	ENDIF
	1247
	1248	!
	1249	!-- Store simulated time at begin
	1250	simulated_time_at_begin = simulated_time
	1251
	1252	!
[291]	1253	!-- Store reference time for coupled runs and change the coupling flag,
	1254	!-- if ...
	1255	IF ( simulated_time == 0.0 ) THEN
	1256	IF ( coupling_start_time == 0.0 ) THEN
	1257	time_since_reference_point = 0.0
	1258	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1259	run_coupled = .FALSE.
	1260	ENDIF
	1261	ENDIF
	1262
	1263	!
[1]	1264	!-- Set wind speed in the Galilei-transformed system
	1265	IF ( galilei_transformation ) THEN
	1266	IF ( use_ug_for_galilei_tr .AND. &
	1267	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1268	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1269	u_gtrans = ug_surface
	1270	v_gtrans = vg_surface
	1271	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1272	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1273	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1274	' with galilei transformation'
[226]	1275	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1276	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1277	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1278	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1279	' with galilei transformation'
[226]	1280	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1281	ELSE
[215]	1282	message_string = 'variable translation speed used for galilei-' // &
	1283	'transformation, which may cause & instabilities in stably ' // &
	1284	'stratified regions'
[226]	1285	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1286	ENDIF
	1287	ENDIF
	1288
	1289	!
	1290	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1291	!-- fluxes have to be used in the diffusion-terms
	1292	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1293
	1294	!
	1295	!-- Check boundary conditions and set internal variables:
	1296	!-- Lateral boundary conditions
[73]	1297	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1298	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1299	message_string = 'unknown boundary condition: bc_lr = "' // &
	1300	TRIM( bc_lr ) // '"'
[226]	1301	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1302	ENDIF
[73]	1303	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1304	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1305	message_string = 'unknown boundary condition: bc_ns = "' // &
	1306	TRIM( bc_ns ) // '"'
[226]	1307	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1308	ENDIF
	1309
	1310	!
[366]	1311	!-- Internal variables used for speed optimization in if clauses
[707]	1312	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1313	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1314	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1315	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1316	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1317	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1318
	1319	!
[1]	1320	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1321	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1322	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1323	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1324	IF ( psolver /= 'multigrid' ) THEN
[215]	1325	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1326	'psolver = "' // TRIM( psolver ) // '"'
[226]	1327	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1328	ENDIF
[667]	1329	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1330	momentum_advec /= 'ws-scheme') THEN
[215]	1331	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1332	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1333	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1334	ENDIF
[667]	1335	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1336	scalar_advec /= 'ws-scheme' ) THEN
[215]	1337	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1338	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1339	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1340	ENDIF
[667]	1341	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
	1342	.AND. loop_optimization == 'vector' ) THEN
	1343	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1344	'loop_optimization = vector and ' // &
	1345	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1346	! The error message number still needs modification.
	1347	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
	1348	END IF
[1]	1349	IF ( galilei_transformation ) THEN
[215]	1350	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1351	'galilei_transformation = .T.'
[226]	1352	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1353	ENDIF
	1354	ENDIF
	1355
	1356	!
	1357	!-- Bottom boundary condition for the turbulent Kinetic energy
	1358	IF ( bc_e_b == 'neumann' ) THEN
	1359	ibc_e_b = 1
	1360	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1361	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1362	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1363	ENDIF
	1364	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1365	ibc_e_b = 2
	1366	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1367	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1368	TRIM( bc_e_b ) // '"'
[226]	1369	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1370	ENDIF
	1371	IF ( .NOT. prandtl_layer ) THEN
	1372	bc_e_b = 'neumann'
	1373	ibc_e_b = 1
[215]	1374	message_string = 'boundary condition bc_e_b changed to "' // &
	1375	TRIM( bc_e_b ) // '"'
[226]	1376	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1377	ENDIF
	1378	ELSE
[215]	1379	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1380	TRIM( bc_e_b ) // '"'
[226]	1381	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1382	ENDIF
	1383
	1384	!
	1385	!-- Boundary conditions for perturbation pressure
	1386	IF ( bc_p_b == 'dirichlet' ) THEN
	1387	ibc_p_b = 0
	1388	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1389	ibc_p_b = 1
	1390	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1391	ibc_p_b = 2
	1392	ELSE
[215]	1393	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1394	TRIM( bc_p_b ) // '"'
[226]	1395	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1396	ENDIF
	1397	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1398	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1399	'" not allowed with prandtl_layer = .FALSE.'
[226]	1400	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1401	ENDIF
	1402	IF ( bc_p_t == 'dirichlet' ) THEN
	1403	ibc_p_t = 0
	1404	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1405	ibc_p_t = 1
	1406	ELSE
[215]	1407	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1408	TRIM( bc_p_t ) // '"'
[226]	1409	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1410	ENDIF
	1411
	1412	!
	1413	!-- Boundary conditions for potential temperature
[102]	1414	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1415	ibc_pt_b = 2
[1]	1416	ELSE
[102]	1417	IF ( bc_pt_b == 'dirichlet' ) THEN
	1418	ibc_pt_b = 0
	1419	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1420	ibc_pt_b = 1
	1421	ELSE
[215]	1422	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1423	TRIM( bc_pt_b ) // '"'
[226]	1424	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1425	ENDIF
	1426	ENDIF
[102]	1427
[1]	1428	IF ( bc_pt_t == 'dirichlet' ) THEN
	1429	ibc_pt_t = 0
	1430	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1431	ibc_pt_t = 1
[19]	1432	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1433	ibc_pt_t = 2
[1]	1434	ELSE
[215]	1435	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1436	TRIM( bc_pt_t ) // '"'
[226]	1437	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1438	ENDIF
	1439
[20]	1440	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1441	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1442	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1443	top_momentumflux_v /= 9999999.9 ) THEN
	1444	constant_top_momentumflux = .TRUE.
	1445	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1446	top_momentumflux_v == 9999999.9 ) ) THEN
	1447	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1448	'must be set'
[226]	1449	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1450	ENDIF
[1]	1451
	1452	!
	1453	!-- A given surface temperature implies Dirichlet boundary condition for
	1454	!-- temperature. In this case specification of a constant heat flux is
	1455	!-- forbidden.
	1456	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1457	surface_heatflux /= 0.0 ) THEN
[215]	1458	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1459	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1460	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1461	ENDIF
	1462	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1463	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1464	'wed with pt_surface_initial_change (/=0) = ', &
	1465	pt_surface_initial_change
[226]	1466	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1467	ENDIF
	1468
	1469	!
[19]	1470	!-- A given temperature at the top implies Dirichlet boundary condition for
	1471	!-- temperature. In this case specification of a constant heat flux is
	1472	!-- forbidden.
	1473	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1474	top_heatflux /= 0.0 ) THEN
[215]	1475	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1476	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1477	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1478	ENDIF
	1479
	1480	!
[95]	1481	!-- Boundary conditions for salinity
	1482	IF ( ocean ) THEN
	1483	IF ( bc_sa_t == 'dirichlet' ) THEN
	1484	ibc_sa_t = 0
	1485	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1486	ibc_sa_t = 1
	1487	ELSE
[215]	1488	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1489	TRIM( bc_sa_t ) // '"'
[226]	1490	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1491	ENDIF
	1492
	1493	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1494	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1495	message_string = 'boundary condition: bc_sa_t = "' // &
	1496	TRIM( bc_sa_t ) // '" requires to set ' // &
	1497	'top_salinityflux'
[226]	1498	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1499	ENDIF
[95]	1500
	1501	!
	1502	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1503	!-- salinity. In this case specification of a constant salinity flux is
	1504	!-- forbidden.
	1505	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1506	top_salinityflux /= 0.0 ) THEN
[215]	1507	message_string = 'boundary condition: bc_sa_t = "' // &
	1508	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1509	'constant_top_salinityflux = .TRUE.'
[226]	1510	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1511	ENDIF
	1512
	1513	ENDIF
	1514
	1515	!
[75]	1516	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1517	!-- water content / scalar
[75]	1518	IF ( humidity .OR. passive_scalar ) THEN
	1519	IF ( humidity ) THEN
[1]	1520	sq = 'q'
	1521	ELSE
	1522	sq = 's'
	1523	ENDIF
	1524	IF ( bc_q_b == 'dirichlet' ) THEN
	1525	ibc_q_b = 0
	1526	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1527	ibc_q_b = 1
	1528	ELSE
[215]	1529	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1530	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1531	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1532	ENDIF
	1533	IF ( bc_q_t == 'dirichlet' ) THEN
	1534	ibc_q_t = 0
	1535	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1536	ibc_q_t = 1
	1537	ELSE
[215]	1538	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1539	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1540	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1541	ENDIF
	1542
[600]	1543	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1544
	1545	!
	1546	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1547	!-- humidity. In this case specification of a constant water flux is
[1]	1548	!-- forbidden.
	1549	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1550	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1551	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1552	'th prescribed surface flux'
[226]	1553	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1554	ENDIF
	1555	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1556	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1557	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1558	q_surface_initial_change
[226]	1559	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1560	ENDIF
	1561
	1562	ENDIF
	1563
	1564	!
	1565	!-- Boundary conditions for horizontal components of wind speed
	1566	IF ( bc_uv_b == 'dirichlet' ) THEN
	1567	ibc_uv_b = 0
	1568	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1569	ibc_uv_b = 1
	1570	IF ( prandtl_layer ) THEN
[215]	1571	message_string = 'boundary condition: bc_uv_b = "' // &
	1572	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1573	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1574	ENDIF
	1575	ELSE
[215]	1576	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1577	TRIM( bc_uv_b ) // '"'
[226]	1578	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1579	ENDIF
[667]	1580	!
	1581	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1582	!-- assigned with the u and v values of the ocean surface
	1583	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1584	ibc_uv_b = 2
	1585	ENDIF
[215]	1586
[108]	1587	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1588	bc_uv_t = 'neumann'
[1]	1589	ibc_uv_t = 1
	1590	ELSE
[132]	1591	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1592	ibc_uv_t = 0
[767]	1593	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1594	!
	1595	!-- Velocities for the initial u,v-profiles are set zero at the top
	1596	!-- in case of dirichlet_0 conditions
	1597	u_init(nzt+1) = 0.0
	1598	v_init(nzt+1) = 0.0
	1599	ENDIF
[108]	1600	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1601	ibc_uv_t = 1
	1602	ELSE
[215]	1603	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1604	TRIM( bc_uv_t ) // '"'
[226]	1605	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1606	ENDIF
	1607	ENDIF
	1608
	1609	!
	1610	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1611	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1612	IF ( momentum_advec == 'ups-scheme' ) THEN
	1613	rayleigh_damping_factor = 0.01
	1614	ELSE
	1615	rayleigh_damping_factor = 0.0
	1616	ENDIF
	1617	ELSE
	1618	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1619	THEN
[215]	1620	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1621	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1622	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1623	ENDIF
	1624	ENDIF
	1625
	1626	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1627	IF ( .NOT. ocean ) THEN
	1628	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1629	ELSE
	1630	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1631	ENDIF
[1]	1632	ELSE
[108]	1633	IF ( .NOT. ocean ) THEN
	1634	IF ( rayleigh_damping_height < 0.0 .OR. &
	1635	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1636	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1637	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1638	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1639	ENDIF
[108]	1640	ELSE
	1641	IF ( rayleigh_damping_height > 0.0 .OR. &
	1642	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1643	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1644	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1645	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1646	ENDIF
[1]	1647	ENDIF
	1648	ENDIF
	1649
	1650	!
	1651	!-- Check limiters for Upstream-Spline scheme
	1652	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1653	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1654	overshoot_limit_e < 0.0 ) THEN
[215]	1655	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1656	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1657	ENDIF
	1658	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1659	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1660	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1661	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1662	ENDIF
	1663
	1664	!
	1665	!-- Check number of chosen statistic regions. More than 10 regions are not
	1666	!-- allowed, because so far no more than 10 corresponding output files can
	1667	!-- be opened (cf. check_open)
	1668	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1669	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1670	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1671	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1672	ENDIF
	1673	IF ( normalizing_region > statistic_regions .OR. &
	1674	normalizing_region < 0) THEN
[215]	1675	WRITE ( message_string, * ) 'normalizing_region = ', &
	1676	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1677	' (value of statistic_regions)'
[226]	1678	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1679	ENDIF
	1680
	1681	!
[116]	1682	!-- Check the interval for sorting particles.
	1683	!-- Using particles as cloud droplets requires sorting after each timestep.
	1684	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1685	dt_sort_particles = 0.0
[215]	1686	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1687	'_droplets = .TRUE.'
[226]	1688	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1689	ENDIF
	1690
	1691	!
[1]	1692	!-- Set the default intervals for data output, if necessary
	1693	!-- NOTE: dt_dosp has already been set in package_parin
	1694	IF ( dt_data_output /= 9999999.9 ) THEN
	1695	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1696	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1697	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1698	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1699	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1700	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1701	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1702	DO mid = 1, max_masks
[410]	1703	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1704	ENDDO
[1]	1705	ENDIF
	1706
	1707	!
	1708	!-- Set the default skip time intervals for data output, if necessary
	1709	IF ( skip_time_dopr == 9999999.9 ) &
	1710	skip_time_dopr = skip_time_data_output
	1711	IF ( skip_time_dosp == 9999999.9 ) &
	1712	skip_time_dosp = skip_time_data_output
	1713	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1714	skip_time_do2d_xy = skip_time_data_output
	1715	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1716	skip_time_do2d_xz = skip_time_data_output
	1717	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1718	skip_time_do2d_yz = skip_time_data_output
	1719	IF ( skip_time_do3d == 9999999.9 ) &
	1720	skip_time_do3d = skip_time_data_output
	1721	IF ( skip_time_data_output_av == 9999999.9 ) &
	1722	skip_time_data_output_av = skip_time_data_output
[564]	1723	DO mid = 1, max_masks
[410]	1724	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1725	skip_time_domask(mid) = skip_time_data_output
	1726	ENDDO
[1]	1727
	1728	!
	1729	!-- Check the average intervals (first for 3d-data, then for profiles and
	1730	!-- spectra)
	1731	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1732	WRITE( message_string, * ) 'averaging_interval = ', &
	1733	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1734	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1735	ENDIF
	1736
	1737	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1738	averaging_interval_pr = averaging_interval
	1739	ENDIF
	1740
	1741	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1742	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1743	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1744	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1745	ENDIF
	1746
	1747	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1748	averaging_interval_sp = averaging_interval
	1749	ENDIF
	1750
	1751	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1752	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1753	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1754	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1755	ENDIF
	1756
	1757	!
	1758	!-- Set the default interval for profiles entering the temporal average
	1759	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1760	dt_averaging_input_pr = dt_averaging_input
	1761	ENDIF
	1762
	1763	!
	1764	!-- Set the default interval for the output of timeseries to a reasonable
	1765	!-- value (tries to minimize the number of calls of flow_statistics)
	1766	IF ( dt_dots == 9999999.9 ) THEN
	1767	IF ( averaging_interval_pr == 0.0 ) THEN
	1768	dt_dots = MIN( dt_run_control, dt_dopr )
	1769	ELSE
	1770	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1771	ENDIF
	1772	ENDIF
	1773
	1774	!
	1775	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1776	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1777	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1778	dt_averaging_input, ' must be <= averaging_interval = ', &
	1779	averaging_interval
[226]	1780	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1781	ENDIF
	1782
	1783	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1784	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1785	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1786	averaging_interval_pr
[226]	1787	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1788	ENDIF
	1789
	1790	!
[72]	1791	!-- Set the default value for the integration interval of precipitation amount
	1792	IF ( precipitation ) THEN
	1793	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1794	precipitation_amount_interval = dt_do2d_xy
	1795	ELSE
	1796	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1797	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1798	precipitation_amount_interval, ' must not be larger than ', &
	1799	'dt_do2d_xy = ', dt_do2d_xy
[226]	1800	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1801	ENDIF
	1802	ENDIF
	1803	ENDIF
	1804
	1805	!
[1]	1806	!-- Determine the number of output profiles and check whether they are
	1807	!-- permissible
	1808	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1809
	1810	dopr_n = dopr_n + 1
	1811	i = dopr_n
	1812
	1813	!
	1814	!-- Determine internal profile number (for hom, homs)
	1815	!-- and store height levels
	1816	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1817
	1818	CASE ( 'u', '#u' )
	1819	dopr_index(i) = 1
[87]	1820	dopr_unit(i) = 'm/s'
[1]	1821	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1822	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1823	dopr_initial_index(i) = 5
	1824	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1825	data_output_pr(i) = data_output_pr(i)(2:)
	1826	ENDIF
	1827
	1828	CASE ( 'v', '#v' )
	1829	dopr_index(i) = 2
[87]	1830	dopr_unit(i) = 'm/s'
	1831	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1832	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1833	dopr_initial_index(i) = 6
	1834	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1835	data_output_pr(i) = data_output_pr(i)(2:)
	1836	ENDIF
	1837
	1838	CASE ( 'w' )
	1839	dopr_index(i) = 3
[87]	1840	dopr_unit(i) = 'm/s'
	1841	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1842
	1843	CASE ( 'pt', '#pt' )
	1844	IF ( .NOT. cloud_physics ) THEN
	1845	dopr_index(i) = 4
[87]	1846	dopr_unit(i) = 'K'
[1]	1847	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1848	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1849	dopr_initial_index(i) = 7
	1850	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1851	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1852	data_output_pr(i) = data_output_pr(i)(2:)
	1853	ENDIF
	1854	ELSE
	1855	dopr_index(i) = 43
[87]	1856	dopr_unit(i) = 'K'
[1]	1857	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1858	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1859	dopr_initial_index(i) = 28
	1860	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1861	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1862	data_output_pr(i) = data_output_pr(i)(2:)
	1863	ENDIF
	1864	ENDIF
	1865
	1866	CASE ( 'e' )
	1867	dopr_index(i) = 8
[87]	1868	dopr_unit(i) = 'm2/s2'
[1]	1869	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1870	hom(nzb,2,8,:) = 0.0
	1871
	1872	CASE ( 'km', '#km' )
	1873	dopr_index(i) = 9
[87]	1874	dopr_unit(i) = 'm2/s'
[1]	1875	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1876	hom(nzb,2,9,:) = 0.0
	1877	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1878	dopr_initial_index(i) = 23
	1879	hom(:,2,23,:) = hom(:,2,9,:)
	1880	data_output_pr(i) = data_output_pr(i)(2:)
	1881	ENDIF
	1882
	1883	CASE ( 'kh', '#kh' )
	1884	dopr_index(i) = 10
[87]	1885	dopr_unit(i) = 'm2/s'
[1]	1886	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1887	hom(nzb,2,10,:) = 0.0
	1888	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1889	dopr_initial_index(i) = 24
	1890	hom(:,2,24,:) = hom(:,2,10,:)
	1891	data_output_pr(i) = data_output_pr(i)(2:)
	1892	ENDIF
	1893
	1894	CASE ( 'l', '#l' )
	1895	dopr_index(i) = 11
[87]	1896	dopr_unit(i) = 'm'
[1]	1897	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1898	hom(nzb,2,11,:) = 0.0
	1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1900	dopr_initial_index(i) = 25
	1901	hom(:,2,25,:) = hom(:,2,11,:)
	1902	data_output_pr(i) = data_output_pr(i)(2:)
	1903	ENDIF
	1904
	1905	CASE ( 'w"u"' )
	1906	dopr_index(i) = 12
[87]	1907	dopr_unit(i) = 'm2/s2'
[1]	1908	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1909	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1910
	1911	CASE ( 'wu' )
	1912	dopr_index(i) = 13
[87]	1913	dopr_unit(i) = 'm2/s2'
[1]	1914	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1915
	1916	CASE ( 'w"v"' )
	1917	dopr_index(i) = 14
[87]	1918	dopr_unit(i) = 'm2/s2'
[1]	1919	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1920	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1921
	1922	CASE ( 'wv' )
	1923	dopr_index(i) = 15
[87]	1924	dopr_unit(i) = 'm2/s2'
[1]	1925	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1926
	1927	CASE ( 'w"pt"' )
	1928	dopr_index(i) = 16
[87]	1929	dopr_unit(i) = 'K m/s'
[1]	1930	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1931
	1932	CASE ( 'wpt' )
	1933	dopr_index(i) = 17
[87]	1934	dopr_unit(i) = 'K m/s'
[1]	1935	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1936
	1937	CASE ( 'wpt' )
	1938	dopr_index(i) = 18
[87]	1939	dopr_unit(i) = 'K m/s'
[1]	1940	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1941
	1942	CASE ( 'wu' )
	1943	dopr_index(i) = 19
[87]	1944	dopr_unit(i) = 'm2/s2'
[1]	1945	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1946	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1947
	1948	CASE ( 'wv' )
	1949	dopr_index(i) = 20
[87]	1950	dopr_unit(i) = 'm2/s2'
[1]	1951	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1952	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1953
	1954	CASE ( 'wptBC' )
	1955	dopr_index(i) = 21
[87]	1956	dopr_unit(i) = 'K m/s'
[1]	1957	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1958
	1959	CASE ( 'wptBC' )
	1960	dopr_index(i) = 22
[87]	1961	dopr_unit(i) = 'K m/s'
[1]	1962	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1963
[96]	1964	CASE ( 'sa', '#sa' )
	1965	IF ( .NOT. ocean ) THEN
[215]	1966	message_string = 'data_output_pr = ' // &
	1967	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1968	'lemented for ocean = .FALSE.'
[226]	1969	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1970	ELSE
	1971	dopr_index(i) = 23
	1972	dopr_unit(i) = 'psu'
	1973	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1974	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1975	dopr_initial_index(i) = 26
	1976	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1977	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1978	data_output_pr(i) = data_output_pr(i)(2:)
	1979	ENDIF
	1980	ENDIF
	1981
[1]	1982	CASE ( 'u*2' )
	1983	dopr_index(i) = 30
[87]	1984	dopr_unit(i) = 'm2/s2'
[1]	1985	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1986
	1987	CASE ( 'v*2' )
	1988	dopr_index(i) = 31
[87]	1989	dopr_unit(i) = 'm2/s2'
[1]	1990	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1991
	1992	CASE ( 'w*2' )
	1993	dopr_index(i) = 32
[87]	1994	dopr_unit(i) = 'm2/s2'
[1]	1995	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1996
	1997	CASE ( 'pt*2' )
	1998	dopr_index(i) = 33
[87]	1999	dopr_unit(i) = 'K2'
[1]	2000	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2001
	2002	CASE ( 'e*' )
	2003	dopr_index(i) = 34
[87]	2004	dopr_unit(i) = 'm2/s2'
[1]	2005	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2006
	2007	CASE ( 'w2pt' )
	2008	dopr_index(i) = 35
[87]	2009	dopr_unit(i) = 'K m2/s2'
[1]	2010	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2011
	2012	CASE ( 'wpt2' )
	2013	dopr_index(i) = 36
[87]	2014	dopr_unit(i) = 'K2 m/s'
[1]	2015	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2016
	2017	CASE ( 'we' )
	2018	dopr_index(i) = 37
[87]	2019	dopr_unit(i) = 'm3/s3'
[1]	2020	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2021
	2022	CASE ( 'w*3' )
	2023	dopr_index(i) = 38
[87]	2024	dopr_unit(i) = 'm3/s3'
[1]	2025	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2026
	2027	CASE ( 'Sw' )
	2028	dopr_index(i) = 39
[89]	2029	dopr_unit(i) = 'none'
[1]	2030	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2031
[232]	2032	CASE ( 'p' )
	2033	dopr_index(i) = 40
	2034	dopr_unit(i) = 'Pa'
	2035	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2036
[1]	2037	CASE ( 'q', '#q' )
[108]	2038	IF ( .NOT. humidity ) THEN
[215]	2039	message_string = 'data_output_pr = ' // &
	2040	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2041	'lemented for humidity = .FALSE.'
[226]	2042	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2043	ELSE
	2044	dopr_index(i) = 41
[87]	2045	dopr_unit(i) = 'kg/kg'
	2046	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2047	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2048	dopr_initial_index(i) = 26
	2049	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2050	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2051	data_output_pr(i) = data_output_pr(i)(2:)
	2052	ENDIF
	2053	ENDIF
	2054
	2055	CASE ( 's', '#s' )
	2056	IF ( .NOT. passive_scalar ) THEN
[215]	2057	message_string = 'data_output_pr = ' // &
	2058	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2059	'lemented for passive_scalar = .FALSE.'
[226]	2060	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2061	ELSE
	2062	dopr_index(i) = 41
[87]	2063	dopr_unit(i) = 'kg/m3'
	2064	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2065	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2066	dopr_initial_index(i) = 26
	2067	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2068	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2069	data_output_pr(i) = data_output_pr(i)(2:)
	2070	ENDIF
	2071	ENDIF
	2072
	2073	CASE ( 'qv', '#qv' )
	2074	IF ( .NOT. cloud_physics ) THEN
	2075	dopr_index(i) = 41
[87]	2076	dopr_unit(i) = 'kg/kg'
	2077	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2078	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2079	dopr_initial_index(i) = 26
	2080	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2081	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2082	data_output_pr(i) = data_output_pr(i)(2:)
	2083	ENDIF
	2084	ELSE
	2085	dopr_index(i) = 42
[87]	2086	dopr_unit(i) = 'kg/kg'
	2087	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2088	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2089	dopr_initial_index(i) = 27
	2090	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2091	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2092	data_output_pr(i) = data_output_pr(i)(2:)
	2093	ENDIF
	2094	ENDIF
	2095
	2096	CASE ( 'lpt', '#lpt' )
	2097	IF ( .NOT. cloud_physics ) THEN
[215]	2098	message_string = 'data_output_pr = ' // &
	2099	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2100	'lemented for cloud_physics = .FALSE.'
[226]	2101	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2102	ELSE
	2103	dopr_index(i) = 4
[87]	2104	dopr_unit(i) = 'K'
[1]	2105	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2106	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2107	dopr_initial_index(i) = 7
	2108	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2109	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2110	data_output_pr(i) = data_output_pr(i)(2:)
	2111	ENDIF
	2112	ENDIF
	2113
	2114	CASE ( 'vpt', '#vpt' )
	2115	dopr_index(i) = 44
[87]	2116	dopr_unit(i) = 'K'
	2117	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2118	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2119	dopr_initial_index(i) = 29
	2120	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2121	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2122	data_output_pr(i) = data_output_pr(i)(2:)
	2123	ENDIF
	2124
	2125	CASE ( 'w"vpt"' )
	2126	dopr_index(i) = 45
[87]	2127	dopr_unit(i) = 'K m/s'
[1]	2128	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2129
	2130	CASE ( 'wvpt' )
	2131	dopr_index(i) = 46
[87]	2132	dopr_unit(i) = 'K m/s'
[1]	2133	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2134
	2135	CASE ( 'wvpt' )
	2136	dopr_index(i) = 47
[87]	2137	dopr_unit(i) = 'K m/s'
[1]	2138	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2139
	2140	CASE ( 'w"q"' )
[108]	2141	IF ( .NOT. humidity ) THEN
[215]	2142	message_string = 'data_output_pr = ' // &
	2143	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2144	'lemented for humidity = .FALSE.'
[226]	2145	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2146	ELSE
	2147	dopr_index(i) = 48
[87]	2148	dopr_unit(i) = 'kg/kg m/s'
[1]	2149	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2150	ENDIF
	2151
	2152	CASE ( 'wq' )
[108]	2153	IF ( .NOT. humidity ) THEN
[215]	2154	message_string = 'data_output_pr = ' // &
	2155	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2156	'lemented for humidity = .FALSE.'
[226]	2157	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2158	ELSE
	2159	dopr_index(i) = 49
[87]	2160	dopr_unit(i) = 'kg/kg m/s'
[1]	2161	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2162	ENDIF
	2163
	2164	CASE ( 'wq' )
[108]	2165	IF ( .NOT. humidity ) THEN
[215]	2166	message_string = 'data_output_pr = ' // &
	2167	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2168	'lemented for humidity = .FALSE.'
[226]	2169	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2170	ELSE
	2171	dopr_index(i) = 50
[87]	2172	dopr_unit(i) = 'kg/kg m/s'
[1]	2173	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2174	ENDIF
	2175
	2176	CASE ( 'w"s"' )
	2177	IF ( .NOT. passive_scalar ) THEN
[215]	2178	message_string = 'data_output_pr = ' // &
	2179	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2180	'lemented for passive_scalar = .FALSE.'
[226]	2181	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2182	ELSE
	2183	dopr_index(i) = 48
[87]	2184	dopr_unit(i) = 'kg/m3 m/s'
[1]	2185	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2186	ENDIF
	2187
	2188	CASE ( 'ws' )
	2189	IF ( .NOT. passive_scalar ) THEN
[215]	2190	message_string = 'data_output_pr = ' // &
	2191	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2192	'lemented for passive_scalar = .FALSE.'
[226]	2193	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2194	ELSE
	2195	dopr_index(i) = 49
[87]	2196	dopr_unit(i) = 'kg/m3 m/s'
[1]	2197	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2198	ENDIF
	2199
	2200	CASE ( 'ws' )
	2201	IF ( .NOT. passive_scalar ) THEN
[215]	2202	message_string = 'data_output_pr = ' // &
	2203	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2204	'lemented for passive_scalar = .FALSE.'
[226]	2205	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2206	ELSE
	2207	dopr_index(i) = 50
[87]	2208	dopr_unit(i) = 'kg/m3 m/s'
[1]	2209	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2210	ENDIF
	2211
	2212	CASE ( 'w"qv"' )
[75]	2213	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2214	THEN
	2215	dopr_index(i) = 48
[87]	2216	dopr_unit(i) = 'kg/kg m/s'
[1]	2217	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2218	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2219	dopr_index(i) = 51
[87]	2220	dopr_unit(i) = 'kg/kg m/s'
[1]	2221	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2222	ELSE
[215]	2223	message_string = 'data_output_pr = ' // &
	2224	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2225	'lemented for cloud_physics = .FALSE. an&' // &
	2226	'd humidity = .FALSE.'
[226]	2227	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2228	ENDIF
	2229
	2230	CASE ( 'wqv' )
[75]	2231	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2232	THEN
	2233	dopr_index(i) = 49
[87]	2234	dopr_unit(i) = 'kg/kg m/s'
[1]	2235	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2236	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2237	dopr_index(i) = 52
[87]	2238	dopr_unit(i) = 'kg/kg m/s'
[1]	2239	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2240	ELSE
[215]	2241	message_string = 'data_output_pr = ' // &
	2242	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2243	'lemented for cloud_physics = .FALSE. an&' // &
	2244	'd humidity = .FALSE.'
[226]	2245	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2246	ENDIF
	2247
	2248	CASE ( 'wqv' )
[75]	2249	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2250	THEN
	2251	dopr_index(i) = 50
[87]	2252	dopr_unit(i) = 'kg/kg m/s'
[1]	2253	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2254	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2255	dopr_index(i) = 53
[87]	2256	dopr_unit(i) = 'kg/kg m/s'
[1]	2257	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2258	ELSE
[215]	2259	message_string = 'data_output_pr = ' // &
	2260	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2261	'lemented for cloud_physics = .FALSE. an&' // &
	2262	'd humidity = .FALSE.'
[226]	2263	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2264	ENDIF
	2265
	2266	CASE ( 'ql' )
	2267	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2268	message_string = 'data_output_pr = ' // &
	2269	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2270	'lemented for cloud_physics = .FALSE. or' // &
	2271	'&cloud_droplets = .FALSE.'
[226]	2272	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2273	ELSE
	2274	dopr_index(i) = 54
[87]	2275	dopr_unit(i) = 'kg/kg'
[1]	2276	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2277	ENDIF
	2278
[524]	2279	CASE ( 'wuu*:dz' )
[1]	2280	dopr_index(i) = 55
[87]	2281	dopr_unit(i) = 'm2/s3'
[1]	2282	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2283
[524]	2284	CASE ( 'wp:dz' )
[1]	2285	dopr_index(i) = 56
[87]	2286	dopr_unit(i) = 'm2/s3'
[106]	2287	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2288
[524]	2289	CASE ( 'w"e:dz' )
[1]	2290	dopr_index(i) = 57
[87]	2291	dopr_unit(i) = 'm2/s3'
[1]	2292	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2293
[667]	2294
[1]	2295	CASE ( 'u"pt"' )
	2296	dopr_index(i) = 58
[87]	2297	dopr_unit(i) = 'K m/s'
[1]	2298	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2299
	2300	CASE ( 'upt' )
	2301	dopr_index(i) = 59
[87]	2302	dopr_unit(i) = 'K m/s'
[1]	2303	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2304
	2305	CASE ( 'upt_t' )
	2306	dopr_index(i) = 60
[87]	2307	dopr_unit(i) = 'K m/s'
[1]	2308	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2309
	2310	CASE ( 'v"pt"' )
	2311	dopr_index(i) = 61
[87]	2312	dopr_unit(i) = 'K m/s'
[1]	2313	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2314
	2315	CASE ( 'vpt' )
	2316	dopr_index(i) = 62
[87]	2317	dopr_unit(i) = 'K m/s'
[1]	2318	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2319
	2320	CASE ( 'vpt_t' )
	2321	dopr_index(i) = 63
[87]	2322	dopr_unit(i) = 'K m/s'
[1]	2323	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2324
[96]	2325	CASE ( 'rho' )
[388]	2326	IF ( .NOT. ocean ) THEN
	2327	message_string = 'data_output_pr = ' // &
	2328	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2329	'lemented for ocean = .FALSE.'
	2330	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2331	ELSE
	2332	dopr_index(i) = 64
	2333	dopr_unit(i) = 'kg/m3'
	2334	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2335	ENDIF
[1]	2336
[96]	2337	CASE ( 'w"sa"' )
	2338	IF ( .NOT. ocean ) THEN
[215]	2339	message_string = 'data_output_pr = ' // &
	2340	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2341	'lemented for ocean = .FALSE.'
[226]	2342	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2343	ELSE
	2344	dopr_index(i) = 65
	2345	dopr_unit(i) = 'psu m/s'
	2346	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2347	ENDIF
	2348
	2349	CASE ( 'wsa' )
	2350	IF ( .NOT. ocean ) THEN
[215]	2351	message_string = 'data_output_pr = ' // &
	2352	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2353	'lemented for ocean = .FALSE.'
[226]	2354	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2355	ELSE
	2356	dopr_index(i) = 66
	2357	dopr_unit(i) = 'psu m/s'
	2358	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2359	ENDIF
	2360
	2361	CASE ( 'wsa' )
	2362	IF ( .NOT. ocean ) THEN
[215]	2363	message_string = 'data_output_pr = ' // &
	2364	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2365	'lemented for ocean = .FALSE.'
[226]	2366	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2367	ELSE
	2368	dopr_index(i) = 67
	2369	dopr_unit(i) = 'psu m/s'
	2370	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2371	ENDIF
	2372
[106]	2373	CASE ( 'wp' )
	2374	dopr_index(i) = 68
	2375	dopr_unit(i) = 'm3/s3'
	2376	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2377
[106]	2378	CASE ( 'w"e' )
	2379	dopr_index(i) = 69
	2380	dopr_unit(i) = 'm3/s3'
	2381	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2382
[197]	2383	CASE ( 'q*2' )
	2384	IF ( .NOT. humidity ) THEN
[215]	2385	message_string = 'data_output_pr = ' // &
	2386	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2387	'lemented for humidity = .FALSE.'
[226]	2388	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2389	ELSE
	2390	dopr_index(i) = 70
	2391	dopr_unit(i) = 'kg2/kg2'
	2392	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2393	ENDIF
[106]	2394
[388]	2395	CASE ( 'prho' )
	2396	IF ( .NOT. ocean ) THEN
	2397	message_string = 'data_output_pr = ' // &
	2398	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2399	'lemented for ocean = .FALSE.'
	2400	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2401	ELSE
	2402	dopr_index(i) = 71
	2403	dopr_unit(i) = 'kg/m3'
	2404	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2405	ENDIF
	2406
	2407	CASE ( 'hyp' )
	2408	dopr_index(i) = 72
[531]	2409	dopr_unit(i) = 'dbar'
[388]	2410	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2411
[1]	2412	CASE DEFAULT
[87]	2413
	2414	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2415
	2416	IF ( unit == 'illegal' ) THEN
[215]	2417	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2418	message_string = 'illegal value for data_output_pr or ' // &
	2419	'data_output_pr_user = "' // &
	2420	TRIM( data_output_pr(i) ) // '"'
[226]	2421	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2422	ELSE
	2423	message_string = 'illegal value for data_output_pr = "' // &
	2424	TRIM( data_output_pr(i) ) // '"'
[226]	2425	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2426	ENDIF
[1]	2427	ENDIF
	2428
	2429	END SELECT
[667]	2430
[1]	2431	!
	2432	!-- Check to which of the predefined coordinate systems the profile belongs
	2433	DO k = 1, crmax
	2434	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2435	/=0 ) &
	2436	THEN
	2437	dopr_crossindex(i) = k
	2438	EXIT
	2439	ENDIF
	2440	ENDDO
	2441	!
	2442	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2443	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2444	!-- control characters
	2445	dopr_label(i) = data_output_pr(i)
	2446	position = INDEX( dopr_label(i) , '"' )
	2447	DO WHILE ( position /= 0 )
	2448	dopr_label(i)(position:position) = ''''
	2449	position = INDEX( dopr_label(i) , '"' )
	2450	ENDDO
	2451
	2452	ENDDO
	2453
	2454	!
	2455	!-- y-value range of the coordinate system (PROFIL).
	2456	!-- x-value range determined in plot_1d.
[94]	2457	IF ( .NOT. ocean ) THEN
	2458	cross_uymin = 0.0
	2459	IF ( z_max_do1d == -1.0 ) THEN
	2460	cross_uymax = zu(nzt+1)
	2461	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2462	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2463	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2464	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2465	ELSE
	2466	cross_uymax = z_max_do1d
	2467	ENDIF
[1]	2468	ENDIF
	2469
	2470	!
	2471	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2472	!-- permissible
	2473	DO i = 1, crmax
	2474	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2475
	2476	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2477	j = 0
	2478
	2479	CASE DEFAULT
[215]	2480	message_string = 'unknown normalization method cross_normali' // &
	2481	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2482	'"'
[226]	2483	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2484
	2485	END SELECT
	2486	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2487
	2488	CASE ( '', 'z_i' )
	2489	j = 0
	2490
	2491	CASE DEFAULT
[215]	2492	message_string = 'unknown normalization method cross_normali' // &
	2493	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2494	'"'
[226]	2495	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2496
	2497	END SELECT
	2498	ENDDO
	2499	!
	2500	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2501	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2502	THEN
[215]	2503	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2504	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2505	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2506	ENDIF
	2507
	2508
	2509	!
	2510	!-- Append user-defined data output variables to the standard data output
	2511	IF ( data_output_user(1) /= ' ' ) THEN
	2512	i = 1
	2513	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2514	i = i + 1
	2515	ENDDO
	2516	j = 1
	2517	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2518	IF ( i > 100 ) THEN
[215]	2519	message_string = 'number of output quantitities given by data' // &
	2520	'_output and data_output_user exceeds the limit of 100'
[226]	2521	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2522	ENDIF
	2523	data_output(i) = data_output_user(j)
	2524	i = i + 1
	2525	j = j + 1
	2526	ENDDO
	2527	ENDIF
	2528
	2529	!
	2530	!-- Check and set steering parameters for 2d/3d data output and averaging
	2531	i = 1
	2532	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2533	!
	2534	!-- Check for data averaging
	2535	ilen = LEN_TRIM( data_output(i) )
	2536	j = 0 ! no data averaging
	2537	IF ( ilen > 3 ) THEN
	2538	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2539	j = 1 ! data averaging
	2540	data_output(i) = data_output(i)(1:ilen-3)
	2541	ENDIF
	2542	ENDIF
	2543	!
	2544	!-- Check for cross section or volume data
	2545	ilen = LEN_TRIM( data_output(i) )
	2546	k = 0 ! 3d data
	2547	var = data_output(i)(1:ilen)
	2548	IF ( ilen > 3 ) THEN
	2549	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2550	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2551	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2552	k = 1 ! 2d data
	2553	var = data_output(i)(1:ilen-3)
	2554	ENDIF
	2555	ENDIF
	2556	!
	2557	!-- Check for allowed value and set units
	2558	SELECT CASE ( TRIM( var ) )
	2559
	2560	CASE ( 'e' )
	2561	IF ( constant_diffusion ) THEN
[215]	2562	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2563	'res constant_diffusion = .FALSE.'
[226]	2564	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2565	ENDIF
	2566	unit = 'm2/s2'
	2567
[771]	2568	CASE ( 'lpt' )
	2569	IF ( .NOT. cloud_physics ) THEN
	2570	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2571	'res cloud_physics = .TRUE.'
	2572	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2573	ENDIF
	2574	unit = 'K'
	2575
[1]	2576	CASE ( 'pc', 'pr' )
	2577	IF ( .NOT. particle_advection ) THEN
[215]	2578	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2579	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2580	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2581	ENDIF
	2582	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2583	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2584
	2585	CASE ( 'q', 'vpt' )
[75]	2586	IF ( .NOT. humidity ) THEN
[215]	2587	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2588	'res humidity = .TRUE.'
[226]	2589	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2590	ENDIF
	2591	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2592	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2593
	2594	CASE ( 'ql' )
	2595	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2596	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2597	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2598	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2599	ENDIF
	2600	unit = 'kg/kg'
	2601
	2602	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2603	IF ( .NOT. cloud_droplets ) THEN
[215]	2604	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2605	'res cloud_droplets = .TRUE.'
[226]	2606	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2607	ENDIF
	2608	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2609	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2610	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2611
	2612	CASE ( 'qv' )
	2613	IF ( .NOT. cloud_physics ) THEN
[215]	2614	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2615	'res cloud_physics = .TRUE.'
[226]	2616	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2617	ENDIF
	2618	unit = 'kg/kg'
	2619
[96]	2620	CASE ( 'rho' )
	2621	IF ( .NOT. ocean ) THEN
[215]	2622	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2623	'res ocean = .TRUE.'
[226]	2624	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2625	ENDIF
	2626	unit = 'kg/m3'
	2627
[1]	2628	CASE ( 's' )
	2629	IF ( .NOT. passive_scalar ) THEN
[215]	2630	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2631	'res passive_scalar = .TRUE.'
[226]	2632	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2633	ENDIF
	2634	unit = 'conc'
	2635
[96]	2636	CASE ( 'sa' )
	2637	IF ( .NOT. ocean ) THEN
[215]	2638	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2639	'res ocean = .TRUE.'
[226]	2640	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2641	ENDIF
	2642	unit = 'psu'
	2643
[354]	2644	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2645	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2646	message_string = 'illegal value for data_output: "' // &
	2647	TRIM( var ) // '" & only 2d-horizontal ' // &
	2648	'cross sections are allowed for this value'
[226]	2649	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2650	ENDIF
	2651	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2652	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2653	'res cloud_physics = .TRUE.'
[226]	2654	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2655	ENDIF
[72]	2656	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2657	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2658	'res precipitation = .TRUE.'
[226]	2659	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2660	ENDIF
	2661	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2662	message_string = 'temporal averaging of precipitation ' // &
	2663	'amount "' // TRIM( var ) // '" is not possible'
[226]	2664	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2665	ENDIF
	2666	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2667	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2668	'res precipitation = .TRUE.'
[226]	2669	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2670	ENDIF
[354]	2671	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2672	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2673	'res humidity = .TRUE.'
	2674	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2675	ENDIF
[72]	2676
[354]	2677	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2678	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2679	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2680	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2681	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2682	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2683	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2684	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2685
[1]	2686
	2687	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2688	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2689	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2690	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2691	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2692	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2693	CONTINUE
	2694
	2695	CASE DEFAULT
	2696	CALL user_check_data_output( var, unit )
	2697
	2698	IF ( unit == 'illegal' ) THEN
[215]	2699	IF ( data_output_user(1) /= ' ' ) THEN
	2700	message_string = 'illegal value for data_output or ' // &
	2701	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2702	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2703	ELSE
	2704	message_string = 'illegal value for data_output =' // &
	2705	TRIM( data_output(i) ) // '"'
[226]	2706	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2707	ENDIF
	2708	ENDIF
	2709
	2710	END SELECT
	2711	!
	2712	!-- Set the internal steering parameters appropriately
	2713	IF ( k == 0 ) THEN
	2714	do3d_no(j) = do3d_no(j) + 1
	2715	do3d(j,do3d_no(j)) = data_output(i)
	2716	do3d_unit(j,do3d_no(j)) = unit
	2717	ELSE
	2718	do2d_no(j) = do2d_no(j) + 1
	2719	do2d(j,do2d_no(j)) = data_output(i)
	2720	do2d_unit(j,do2d_no(j)) = unit
	2721	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2722	data_output_xy(j) = .TRUE.
	2723	ENDIF
	2724	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2725	data_output_xz(j) = .TRUE.
	2726	ENDIF
	2727	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2728	data_output_yz(j) = .TRUE.
	2729	ENDIF
	2730	ENDIF
	2731
	2732	IF ( j == 1 ) THEN
	2733	!
	2734	!-- Check, if variable is already subject to averaging
	2735	found = .FALSE.
	2736	DO k = 1, doav_n
	2737	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2738	ENDDO
	2739
	2740	IF ( .NOT. found ) THEN
	2741	doav_n = doav_n + 1
	2742	doav(doav_n) = var
	2743	ENDIF
	2744	ENDIF
	2745
	2746	i = i + 1
	2747	ENDDO
	2748
	2749	!
[376]	2750	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2751	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2752	WRITE( message_string, * ) 'output of averaged quantity "', &
	2753	TRIM( doav(1) ), '_av" requires to set a ', &
	2754	'non-zero & averaging interval'
	2755	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2756	ENDIF
	2757
	2758	!
[308]	2759	!-- Check sectional planes and store them in one shared array
	2760	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2761	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2762	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2763	ENDIF
	2764	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2765	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2766	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2767	ENDIF
	2768	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2769	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2770	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2771	ENDIF
[1]	2772	section(:,1) = section_xy
	2773	section(:,2) = section_xz
	2774	section(:,3) = section_yz
	2775
	2776	!
	2777	!-- Upper plot limit (grid point value) for 1D profiles
	2778	IF ( z_max_do1d == -1.0 ) THEN
[667]	2779
[1]	2780	nz_do1d = nzt+1
[667]	2781
[1]	2782	ELSE
	2783	DO k = nzb+1, nzt+1
	2784	nz_do1d = k
	2785	IF ( zw(k) > z_max_do1d ) EXIT
	2786	ENDDO
	2787	ENDIF
	2788
	2789	!
	2790	!-- Upper plot limit for 2D vertical sections
	2791	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2792	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2793	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2794	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2795	' (zu(nzt))'
[226]	2796	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2797	ENDIF
	2798
	2799	!
	2800	!-- Upper plot limit for 3D arrays
	2801	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2802
	2803	!
	2804	!-- Determine and check accuracy for compressed 3D plot output
	2805	IF ( do3d_compress ) THEN
	2806	!
	2807	!-- Compression only permissible on T3E machines
	2808	IF ( host(1:3) /= 't3e' ) THEN
[215]	2809	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2810	TRIM( host ) // '"'
[226]	2811	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2812	ENDIF
	2813
	2814	i = 1
	2815	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2816
	2817	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2818	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2819	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2820	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2821	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2822	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2823	ENDIF
	2824
	2825	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2826	var = do3d_comp_prec(i)(1:ilen-1)
	2827
	2828	SELECT CASE ( var )
	2829
	2830	CASE ( 'u' )
	2831	j = 1
	2832	CASE ( 'v' )
	2833	j = 2
	2834	CASE ( 'w' )
	2835	j = 3
	2836	CASE ( 'p' )
	2837	j = 4
	2838	CASE ( 'pt' )
	2839	j = 5
	2840
	2841	CASE DEFAULT
[215]	2842	WRITE( message_string, * ) 'unknown variable "', &
	2843	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2844	i, ')'
[226]	2845	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2846
	2847	END SELECT
	2848
	2849	plot_3d_precision(j)%precision = prec
	2850	i = i + 1
	2851
	2852	ENDDO
	2853	ENDIF
	2854
	2855	!
	2856	!-- Check the data output format(s)
	2857	IF ( data_output_format(1) == ' ' ) THEN
	2858	!
	2859	!-- Default value
	2860	netcdf_output = .TRUE.
	2861	ELSE
	2862	i = 1
	2863	DO WHILE ( data_output_format(i) /= ' ' )
	2864
	2865	SELECT CASE ( data_output_format(i) )
	2866
	2867	CASE ( 'netcdf' )
	2868	netcdf_output = .TRUE.
	2869	CASE ( 'iso2d' )
	2870	iso2d_output = .TRUE.
	2871	CASE ( 'profil' )
	2872	profil_output = .TRUE.
	2873	CASE ( 'avs' )
	2874	avs_output = .TRUE.
	2875
	2876	CASE DEFAULT
[215]	2877	message_string = 'unknown value for data_output_format "' // &
	2878	TRIM( data_output_format(i) ) // '"'
[226]	2879	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2880
	2881	END SELECT
	2882
	2883	i = i + 1
	2884	IF ( i > 10 ) EXIT
	2885
	2886	ENDDO
	2887
	2888	ENDIF
	2889
	2890	!
[410]	2891	!-- Check mask conditions
[553]	2892	DO mid = 1, max_masks
[567]	2893	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2894	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2895	masks = masks + 1
	2896	ENDIF
	2897	ENDDO
	2898
[410]	2899	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2900	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2901	'<= ', max_masks, ' (=max_masks)'
[564]	2902	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2903	ENDIF
	2904	IF ( masks > 0 ) THEN
	2905	mask_scale(1) = mask_scale_x
	2906	mask_scale(2) = mask_scale_y
	2907	mask_scale(3) = mask_scale_z
	2908	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2909	WRITE( message_string, * ) &
	2910	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2911	'must be > 0.0'
[564]	2912	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2913	ENDIF
	2914	!
	2915	!-- Generate masks for masked data output
	2916	CALL init_masks
	2917	ENDIF
	2918
	2919	!
[493]	2920	!-- Check the NetCDF data format
	2921	IF ( netcdf_data_format > 2 ) THEN
	2922	#if defined( __netcdf4 )
	2923	CONTINUE
	2924	#else
	2925	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2926	'cpp-directive __netcdf4 given & switch ' // &
	2927	'back to 64-bit offset format'
	2928	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2929	netcdf_data_format = 2
	2930	#endif
	2931	ENDIF
	2932
	2933	!
[667]	2934
[1]	2935	!-- Check netcdf precison
	2936	ldum = .FALSE.
	2937	CALL define_netcdf_header( 'ch', ldum, 0 )
	2938
	2939	!
	2940	!-- Check, whether a constant diffusion coefficient shall be used
	2941	IF ( km_constant /= -1.0 ) THEN
	2942	IF ( km_constant < 0.0 ) THEN
[215]	2943	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2944	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2945	ELSE
	2946	IF ( prandtl_number < 0.0 ) THEN
[215]	2947	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2948	' < 0.0'
[226]	2949	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2950	ENDIF
	2951	constant_diffusion = .TRUE.
	2952
	2953	IF ( prandtl_layer ) THEN
[215]	2954	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2955	'value of km'
[226]	2956	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2957	ENDIF
	2958	ENDIF
	2959	ENDIF
	2960
	2961	!
	2962	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2963	!-- for the horizontal diffusivity used within the outflow damping layer,
	2964	!-- and check/set the width of the damping layer
	2965	IF ( bc_lr /= 'cyclic' ) THEN
	2966	IF ( km_damp_max == -1.0 ) THEN
	2967	km_damp_max = 0.5 * dx
	2968	ENDIF
	2969	IF ( outflow_damping_width == -1.0 ) THEN
	2970	outflow_damping_width = MIN( 20, nx/2 )
	2971	ENDIF
	2972	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2973	message_string = 'outflow_damping width out of range'
[226]	2974	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2975	ENDIF
	2976	ENDIF
	2977
	2978	IF ( bc_ns /= 'cyclic' ) THEN
	2979	IF ( km_damp_max == -1.0 ) THEN
	2980	km_damp_max = 0.5 * dy
	2981	ENDIF
	2982	IF ( outflow_damping_width == -1.0 ) THEN
	2983	outflow_damping_width = MIN( 20, ny/2 )
	2984	ENDIF
	2985	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2986	message_string = 'outflow_damping width out of range'
[226]	2987	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2988	ENDIF
	2989	ENDIF
	2990
	2991	!
	2992	!-- Check value range for rif
	2993	IF ( rif_min >= rif_max ) THEN
[215]	2994	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2995	'than rif_max = ', rif_max
[226]	2996	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2997	ENDIF
	2998
	2999	!
	3000	!-- Determine upper and lower hight level indices for random perturbations
[97]	3001	IF ( disturbance_level_b == -9999999.9 ) THEN
	3002	IF ( ocean ) THEN
	3003	disturbance_level_b = zu((nzt*2)/3)
	3004	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3005	ELSE
	3006	disturbance_level_b = zu(nzb+3)
	3007	disturbance_level_ind_b = nzb + 3
	3008	ENDIF
[1]	3009	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3010	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3011	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3012	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3013	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3014	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3015	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3016	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3017	ELSE
	3018	DO k = 3, nzt-2
	3019	IF ( disturbance_level_b <= zu(k) ) THEN
	3020	disturbance_level_ind_b = k
	3021	EXIT
	3022	ENDIF
	3023	ENDDO
	3024	ENDIF
	3025
[97]	3026	IF ( disturbance_level_t == -9999999.9 ) THEN
	3027	IF ( ocean ) THEN
	3028	disturbance_level_t = zu(nzt-3)
	3029	disturbance_level_ind_t = nzt - 3
	3030	ELSE
	3031	disturbance_level_t = zu(nzt/3)
	3032	disturbance_level_ind_t = nzt / 3
	3033	ENDIF
[1]	3034	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3035	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3036	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3037	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3038	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3039	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3040	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3041	disturbance_level_b
[226]	3042	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3043	ELSE
	3044	DO k = 3, nzt-2
	3045	IF ( disturbance_level_t <= zu(k) ) THEN
	3046	disturbance_level_ind_t = k
	3047	EXIT
	3048	ENDIF
	3049	ENDDO
	3050	ENDIF
	3051
	3052	!
	3053	!-- Check again whether the levels determined this way are ok.
	3054	!-- Error may occur at automatic determination and too few grid points in
	3055	!-- z-direction.
	3056	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3057	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3058	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3059	disturbance_level_b
[226]	3060	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3061	ENDIF
	3062
	3063	!
	3064	!-- Determine the horizontal index range for random perturbations.
	3065	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3066	!-- near the inflow and the perturbation area is further limited to ...(1)
	3067	!-- after the initial phase of the flow.
	3068	dist_nxl = 0; dist_nxr = nx
	3069	dist_nys = 0; dist_nyn = ny
	3070	IF ( bc_lr /= 'cyclic' ) THEN
	3071	IF ( inflow_disturbance_begin == -1 ) THEN
	3072	inflow_disturbance_begin = MIN( 10, nx/2 )
	3073	ENDIF
	3074	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3075	THEN
[215]	3076	message_string = 'inflow_disturbance_begin out of range'
[226]	3077	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3078	ENDIF
	3079	IF ( inflow_disturbance_end == -1 ) THEN
	3080	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3081	ENDIF
	3082	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3083	THEN
[215]	3084	message_string = 'inflow_disturbance_end out of range'
[226]	3085	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3086	ENDIF
	3087	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3088	IF ( inflow_disturbance_begin == -1 ) THEN
	3089	inflow_disturbance_begin = MIN( 10, ny/2 )
	3090	ENDIF
	3091	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3092	THEN
[215]	3093	message_string = 'inflow_disturbance_begin out of range'
[226]	3094	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3095	ENDIF
	3096	IF ( inflow_disturbance_end == -1 ) THEN
	3097	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3098	ENDIF
	3099	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3100	THEN
[215]	3101	message_string = 'inflow_disturbance_end out of range'
[226]	3102	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3103	ENDIF
	3104	ENDIF
	3105
[73]	3106	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3107	dist_nxr = nx - inflow_disturbance_begin
	3108	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3109	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3110	dist_nxl = inflow_disturbance_begin
	3111	dist_nxr(1) = inflow_disturbance_end
[73]	3112	ENDIF
	3113	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3114	dist_nyn = ny - inflow_disturbance_begin
	3115	dist_nys(1) = ny - inflow_disturbance_end
[73]	3116	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3117	dist_nys = inflow_disturbance_begin
	3118	dist_nyn(1) = inflow_disturbance_end
	3119	ENDIF
	3120
	3121	!
[151]	3122	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3123	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3124	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3125	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3126	'condition at the inflow boundary'
[226]	3127	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3128	ENDIF
	3129
	3130	!
	3131	!-- In case of turbulent inflow calculate the index of the recycling plane
	3132	IF ( turbulent_inflow ) THEN
	3133	IF ( recycling_width == 9999999.9 ) THEN
	3134	!
	3135	!-- Set the default value for the width of the recycling domain
	3136	recycling_width = 0.1 * nx * dx
	3137	ELSE
	3138	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3139	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3140	' ', recycling_width
[226]	3141	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3142	ENDIF
	3143	ENDIF
	3144	!
	3145	!-- Calculate the index
	3146	recycling_plane = recycling_width / dx
	3147	ENDIF
	3148
	3149	!
[1]	3150	!-- Check random generator
	3151	IF ( random_generator /= 'system-specific' .AND. &
	3152	random_generator /= 'numerical-recipes' ) THEN
[215]	3153	message_string = 'unknown random generator: random_generator = "' // &
	3154	TRIM( random_generator ) // '"'
[226]	3155	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3156	ENDIF
	3157
	3158	!
	3159	!-- Determine damping level index for 1D model
	3160	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3161	IF ( damp_level_1d == -1.0 ) THEN
	3162	damp_level_1d = zu(nzt+1)
	3163	damp_level_ind_1d = nzt + 1
	3164	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3165	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3166	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3167	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3168	ELSE
	3169	DO k = 1, nzt+1
	3170	IF ( damp_level_1d <= zu(k) ) THEN
	3171	damp_level_ind_1d = k
	3172	EXIT
	3173	ENDIF
	3174	ENDDO
	3175	ENDIF
	3176	ENDIF
[215]	3177
[1]	3178	!
	3179	!-- Check some other 1d-model parameters
	3180	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3181	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3182	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3183	'" is unknown'
[226]	3184	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3185	ENDIF
	3186	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3187	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3188	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3189	'" is unknown'
[226]	3190	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3191	ENDIF
	3192
	3193	!
	3194	!-- Set time for the next user defined restart (time_restart is the
	3195	!-- internal parameter for steering restart events)
	3196	IF ( restart_time /= 9999999.9 ) THEN
[291]	3197	IF ( restart_time > time_since_reference_point ) THEN
	3198	time_restart = restart_time
	3199	ENDIF
[1]	3200	ELSE
	3201	!
	3202	!-- In case of a restart run, set internal parameter to default (no restart)
	3203	!-- if the NAMELIST-parameter restart_time is omitted
	3204	time_restart = 9999999.9
	3205	ENDIF
	3206
	3207	!
	3208	!-- Set default value of the time needed to terminate a model run
	3209	IF ( termination_time_needed == -1.0 ) THEN
	3210	IF ( host(1:3) == 'ibm' ) THEN
	3211	termination_time_needed = 300.0
	3212	ELSE
	3213	termination_time_needed = 35.0
	3214	ENDIF
	3215	ENDIF
	3216
	3217	!
	3218	!-- Check the time needed to terminate a model run
	3219	IF ( host(1:3) == 't3e' ) THEN
	3220	!
	3221	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3222	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3223	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3224	WRITE( message_string, * ) 'termination_time_needed = ', &
	3225	termination_time_needed, ' must be > 30.0 on host "', &
	3226	TRIM( host ), '"'
[226]	3227	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3228	ENDIF
	3229	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3230	!
	3231	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3232	!-- because the job time consumed before executing palm (for compiling,
	3233	!-- copying of files, etc.) has to be regarded
	3234	IF ( termination_time_needed < 300.0 ) THEN
[215]	3235	WRITE( message_string, * ) 'termination_time_needed = ', &
	3236	termination_time_needed, ' should be >= 300.0 on host "', &
	3237	TRIM( host ), '"'
[226]	3238	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3239	ENDIF
	3240	ENDIF
	3241
[217]	3242	!
[240]	3243	!-- Check pressure gradient conditions
	3244	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3245	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3246	'w are .TRUE. but one of them must be .FALSE.'
[240]	3247	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3248	ENDIF
	3249	IF ( dp_external ) THEN
	3250	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3251	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3252	' of range'
	3253	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3254	ENDIF
	3255	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3256	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3257	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3258	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3259	ENDIF
	3260	ENDIF
	3261	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3262	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3263	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3264	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3265	ENDIF
[241]	3266	IF ( conserve_volume_flow ) THEN
	3267	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3268
	3269	conserve_volume_flow_mode = 'initial_profiles'
	3270
[241]	3271	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3272	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3273	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3274	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3275	conserve_volume_flow_mode
	3276	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3277	ENDIF
[667]	3278	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3279	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3280	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3281	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3282	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3283	ENDIF
	3284	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3285	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3286	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3287	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3288	' or ''bulk_velocity'''
	3289	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3290	ENDIF
	3291	ENDIF
	3292	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3293	( .NOT. conserve_volume_flow .OR. &
	3294	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3295	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3296	'conserve_volume_flow = .T. and ', &
[241]	3297	'conserve_volume_flow_mode = ''bulk_velocity'''
	3298	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3299	ENDIF
[240]	3300
	3301	!
[264]	3302	!-- Check particle attributes
	3303	IF ( particle_color /= 'none' ) THEN
	3304	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3305	particle_color /= 'z' ) THEN
	3306	message_string = 'illegal value for parameter particle_color: ' // &
	3307	TRIM( particle_color)
	3308	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3309	ELSE
	3310	IF ( color_interval(2) <= color_interval(1) ) THEN
	3311	message_string = 'color_interval(2) <= color_interval(1)'
	3312	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3313	ENDIF
	3314	ENDIF
	3315	ENDIF
	3316
	3317	IF ( particle_dvrpsize /= 'none' ) THEN
	3318	IF ( particle_dvrpsize /= 'absw' ) THEN
	3319	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3320	' ' // TRIM( particle_color)
	3321	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3322	ELSE
	3323	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3324	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3325	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3326	ENDIF
	3327	ENDIF
	3328	ENDIF
	3329
	3330	!
[217]	3331	!-- Check &userpar parameters
	3332	CALL user_check_parameters
[1]	3333
[217]	3334
[667]	3335
[1]	3336	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |