Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 774

Last change on this file since 774 was 774, checked in by letzel, 12 years ago
bugfix for prescribed u,v-profiles
Property svn:keywords set to `Id`
File size: 130.2 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! bugfix for prescribed u,v-profiles
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 774 2011-10-27 13:34:16Z letzel $
11	!
12	! 767 2011-10-14 06:39:12Z raasch
13	! Calculating u,v-profiles from given profiles by linear interpolation.
14	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
15	!
16	! 707 2011-03-29 11:39:40Z raasch
17	! setting of bc_lr/ns_dirrad/raddir
18	!
19	! 689 2011-02-20 19:31:12z gryschka
20	! Bugfix for some logical expressions
21	! (syntax was not compatible with all compilers)
22	!
23	! 680 2011-02-04 23:16:06Z gryschka
24	! init_vortex is not allowed with volume_flow_control
25	!
26	! 673 2011-01-18 16:19:48Z suehring
27	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
28	!
29	! 667 2010-12-23 12:06:00Z suehring/gryschka
30	! Exchange of parameters between ocean and atmosphere via PE0
31	! Check for illegal combination of ws-scheme and timestep scheme.
32	! Check for topography and ws-scheme.
33	! Check for not cyclic boundary conditions in combination with ws-scheme and
34	! loop_optimization = 'vector'.
35	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
36	! Different processor/grid topology in atmosphere and ocean is now allowed!
37	! Bugfixes in checking for conserve_volume_flow_mode
38	! 600 2010-11-24 16:10:51Z raasch
39	! change due to new default value of surface_waterflux
40	! 580 2010-10-05 13:59:11Z heinze
41	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
42	!
43	! 567 2010-10-01 10:46:30Z helmke
44	! calculating masks changed
45	!
46	! 564 2010-09-30 13:18:59Z helmke
47	! palm message identifiers of masked output changed, 20 replaced by max_masks
48	!
49	! 553 2010-09-01 14:09:06Z weinreis
50	! masks is calculated and removed from inipar
51	!
52	! 531 2010-04-21 06:47:21Z heinze
53	! Bugfix: unit of hyp changed to dbar
54	!
55	! 524 2010-03-30 02:04:51Z raasch
56	! Bugfix: "/" in netcdf profile variable names replaced by ":"
57	!
58	! 493 2010-03-01 08:30:24Z raasch
59	! netcdf_data_format is checked
60	!
61	! 411 2009-12-11 14:15:58Z heinze
62	! Enabled passive scalar/humidity wall fluxes for non-flat topography
63	! Initialization of large scale vertical motion (subsidence/ascent)
64	!
65	! 410 2009-12-04 17:05:40Z letzel
66	! masked data output
67	!
68	! 388 2009-09-23 09:40:33Z raasch
69	! Check profiles fpr prho and hyp.
70	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
71	! interval has been set, respective error message is included
72	! bc_lr_cyc and bc_ns_cyc are set,
73	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
74	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
75	! Coupling with independent precursor runs.
76	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
77	! Bugfix: pressure included for profile output
78	! Check pressure gradient conditions
79	! topography_grid_convention moved from user_check_parameters
80	! 'single_street_canyon'
81	! Added shf* and qsws* to the list of available output data
82	!
83	! 222 2009-01-12 16:04:16Z letzel
84	! +user_check_parameters
85	! Output of messages replaced by message handling routine.
86	! Implementation of an MPI-1 coupling: replaced myid with target_id,
87	! deleted __mpi2 directives
88	! Check that PALM is called with mrun -K parallel for coupling
89	!
90	! 197 2008-09-16 15:29:03Z raasch
91	! Bug fix: Construction of vertical profiles when 10 gradients have been
92	! specified in the parameter list (ug, vg, pt, q, sa, lad)
93	!
94	! Strict grid matching along z is not needed for mg-solver.
95	! Leaf area density (LAD) explicitly set to its surface value at k=0
96	! Case of reading data for recycling included in initializing_actions,
97	! check of turbulent_inflow and calculation of recycling_plane.
98	! q*2 profile added
99	!
100	! 138 2007-11-28 10:03:58Z letzel
101	! Plant canopy added
102	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
103	! Multigrid solver allows topography, checking of dt_sort_particles
104	! Bugfix: initializing u_init and v_init in case of ocean runs
105	!
106	! 109 2007-08-28 15:26:47Z letzel
107	! Check coupling_mode and set default (obligatory) values (like boundary
108	! conditions for temperature and fluxes) in case of coupled runs.
109	! +profiles for wp and w"e
110	! Bugfix: Error message concerning output of particle concentration (pc)
111	! modified
112	! More checks and more default values for coupled runs
113	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
114	! cloud_physics = .T.)
115	! Rayleigh damping for ocean fixed.
116	! Check and, if necessary, set default value for dt_coupling
117	!
118	! 97 2007-06-21 08:23:15Z raasch
119	! Initial salinity profile is calculated, salinity boundary conditions are
120	! checked,
121	! z_max_do1d is checked only in case of ocean = .f.,
122	! +initial temperature and geostrophic velocity profiles for the ocean version,
123	! use_pt_reference renamed use_reference
124	!
125	! 89 2007-05-25 12:08:31Z raasch
126	! Check for user-defined profiles
127	!
128	! 75 2007-03-22 09:54:05Z raasch
129	! "by_user" allowed as initializing action, -data_output_ts,
130	! leapfrog with non-flat topography not allowed any more, loop_optimization
131	! and pt_reference are checked, moisture renamed humidity,
132	! output of precipitation amount/rate and roughnes length + check
133	! possible negative humidities are avoided in initial profile,
134	! dirichlet/neumann changed to dirichlet/radiation, etc.,
135	! revision added to run_description_header
136	!
137	! 20 2007-02-26 00:12:32Z raasch
138	! Temperature and humidity gradients at top are now calculated for nzt+1,
139	! top_heatflux and respective boundary condition bc_pt_t is checked
140	!
141	! RCS Log replace by Id keyword, revision history cleaned up
142	!
143	! Revision 1.61 2006/08/04 14:20:25 raasch
144	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
145	! use_upstream_for_tke, default value for dt_dopts,
146	! generation of file header moved from routines palm and header to here
147	!
148	! Revision 1.1 1997/08/26 06:29:23 raasch
149	! Initial revision
150	!
151	!
152	! Description:
153	! ------------
154	! Check control parameters and deduce further quantities.
155	!------------------------------------------------------------------------------!
156
157	USE arrays_3d
158	USE constants
159	USE control_parameters
160	USE dvrp_variables
161	USE grid_variables
162	USE indices
163	USE model_1d
164	USE netcdf_control
165	USE particle_attributes
166	USE pegrid
167	USE profil_parameter
168	USE subsidence_mod
169	USE statistics
170	USE transpose_indices
171
172	IMPLICIT NONE
173
174	CHARACTER (LEN=1) :: sq
175	CHARACTER (LEN=6) :: var
176	CHARACTER (LEN=7) :: unit
177	CHARACTER (LEN=8) :: date
178	CHARACTER (LEN=10) :: time
179	CHARACTER (LEN=40) :: coupling_string
180	CHARACTER (LEN=100) :: action
181
182	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
183	position, prec
184	LOGICAL :: found, ldum
185	REAL :: gradient, maxn, maxp, remote = 0.0, &
186	simulation_time_since_reference
187
188	!
189	!-- Warning, if host is not set
190	IF ( host(1:1) == ' ' ) THEN
191	message_string = '"host" is not set. Please check that environment ' // &
192	'variable "localhost" & is set before running PALM'
193	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
194	ENDIF
195
196	!
197	!-- Check the coupling mode
198	IF ( coupling_mode /= 'uncoupled' .AND. &
199	coupling_mode /= 'atmosphere_to_ocean' .AND. &
200	coupling_mode /= 'ocean_to_atmosphere' ) THEN
201	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
202	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
203	ENDIF
204
205	!
206	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
207	IF ( coupling_mode /= 'uncoupled') THEN
208
209	IF ( dt_coupling == 9999999.9 ) THEN
210	message_string = 'dt_coupling is not set but required for coup' // &
211	'ling mode "' // TRIM( coupling_mode ) // '"'
212	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
213	ENDIF
214
215	#if defined( __parallel )
216	IF ( myid == 0 ) THEN
217	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
218	ierr )
219	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
220	status, ierr )
221	ENDIF
222	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
223
224	IF ( dt_coupling /= remote ) THEN
225	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
226	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
227	'dt_coupling_remote = ', remote
228	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
229	ENDIF
230	IF ( dt_coupling <= 0.0 ) THEN
231	IF ( myid == 0 ) THEN
232	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
233	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
234	status, ierr )
235	ENDIF
236	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
237
238	dt_coupling = MAX( dt_max, remote )
239	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
240	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
241	'MAX(dt_max(A,O)) = ', dt_coupling
242	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
243	ENDIF
244	IF ( myid == 0 ) THEN
245	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
246	ierr )
247	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
248	status, ierr )
249	ENDIF
250	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
251
252	IF ( restart_time /= remote ) THEN
253	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
254	'": restart_time = ', restart_time, '& is not equal to ', &
255	'restart_time_remote = ', remote
256	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
257	ENDIF
258	IF ( myid == 0 ) THEN
259	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
260	ierr )
261	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
262	status, ierr )
263	ENDIF
264	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
265
266	IF ( dt_restart /= remote ) THEN
267	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
268	'": dt_restart = ', dt_restart, '& is not equal to ', &
269	'dt_restart_remote = ', remote
270	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
271	ENDIF
272
273	simulation_time_since_reference = end_time - coupling_start_time
274	IF ( myid == 0 ) THEN
275	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
276	14, comm_inter, ierr )
277	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
278	status, ierr )
279	ENDIF
280	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
281
282	IF ( simulation_time_since_reference /= remote ) THEN
283	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
284	'": simulation_time_since_reference = ', &
285	simulation_time_since_reference, '& is not equal to ', &
286	'simulation_time_since_reference_remote = ', remote
287	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
288	ENDIF
289
290
291	IF ( myid == 0 ) THEN
292	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
293	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
294	status, ierr )
295	ENDIF
296	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
297
298
299	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
300
301	IF ( dx < remote ) THEN
302	WRITE( message_string, * ) 'coupling mode "', &
303	TRIM( coupling_mode ), &
304	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
305	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
306	ENDIF
307
308	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
309	WRITE( message_string, * ) 'coupling mode "', &
310	TRIM( coupling_mode ), &
311	'": Domain size in x-direction is not equal in ocean and atmosphere'
312	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
313	ENDIF
314
315	ENDIF
316
317	IF ( myid == 0) THEN
318	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
319	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
320	status, ierr )
321	ENDIF
322	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
323
324	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
325
326	IF ( dy < remote ) THEN
327	WRITE( message_string, * ) 'coupling mode "', &
328	TRIM( coupling_mode ), &
329	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
330	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
331	ENDIF
332
333	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
334	WRITE( message_string, * ) 'coupling mode "', &
335	TRIM( coupling_mode ), &
336	'": Domain size in y-direction is not equal in ocean and atmosphere'
337	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
338	ENDIF
339
340	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
341	WRITE( message_string, * ) 'coupling mode "', &
342	TRIM( coupling_mode ), &
343	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
344	' atmosphere'
345	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
346	ENDIF
347
348	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
349	WRITE( message_string, * ) 'coupling mode "', &
350	TRIM( coupling_mode ), &
351	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
352	' atmosphere'
353	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
354	ENDIF
355
356	ENDIF
357	#else
358	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
359	' ''mrun -K parallel'''
360	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
361	#endif
362	ENDIF
363
364	#if defined( __parallel )
365	!
366	!-- Exchange via intercommunicator
367	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
368	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
369	ierr )
370	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
371	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
372	comm_inter, status, ierr )
373	ENDIF
374	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
375
376	#endif
377
378
379	!
380	!-- Generate the file header which is used as a header for most of PALM's
381	!-- output files
382	CALL DATE_AND_TIME( date, time )
383	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
384	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
385	IF ( coupling_mode == 'uncoupled' ) THEN
386	coupling_string = ''
387	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
388	coupling_string = ' coupled (atmosphere)'
389	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
390	coupling_string = ' coupled (ocean)'
391	ENDIF
392
393	WRITE ( run_description_header, &
394	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
395	TRIM( version ), TRIM( revision ), 'run: ', &
396	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
397	'host: ', TRIM( host ), run_date, run_time
398
399	!
400	!-- Check the general loop optimization method
401	IF ( loop_optimization == 'default' ) THEN
402	IF ( host(1:3) == 'nec' ) THEN
403	loop_optimization = 'vector'
404	ELSE
405	loop_optimization = 'cache'
406	ENDIF
407	ENDIF
408	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
409	.AND. loop_optimization /= 'vector' ) THEN
410	message_string = 'illegal value given for loop_optimization: "' // &
411	TRIM( loop_optimization ) // '"'
412	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
413	ENDIF
414
415	!
416	!-- Check topography setting (check for illegal parameter combinations)
417	IF ( topography /= 'flat' ) THEN
418	action = ' '
419	IF ( scalar_advec /= 'pw-scheme' ) THEN
420	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
421	ENDIF
422	IF ( momentum_advec /= 'pw-scheme' ) THEN
423	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
424	ENDIF
425	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
426	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
427	ENDIF
428	IF ( psolver == 'sor' ) THEN
429	WRITE( action, '(A,A)' ) 'psolver = ', psolver
430	ENDIF
431	IF ( sloping_surface ) THEN
432	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
433	ENDIF
434	IF ( galilei_transformation ) THEN
435	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
436	ENDIF
437	IF ( cloud_physics ) THEN
438	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
439	ENDIF
440	IF ( cloud_droplets ) THEN
441	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
442	ENDIF
443	IF ( .NOT. prandtl_layer ) THEN
444	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
445	ENDIF
446	IF ( action /= ' ' ) THEN
447	message_string = 'a non-flat topography does not allow ' // &
448	TRIM( action )
449	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
450	ENDIF
451	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
452	THEN
453	message_string = 'topography is still not allowed with ' // &
454	'momentum_advec = "' // TRIM( momentum_advec ) // &
455	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
456	! message number still needs modification
457	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
458	END IF
459
460	!
461	!-- In case of non-flat topography, check whether the convention how to
462	!-- define the topography grid has been set correctly, or whether the default
463	!-- is applicable. If this is not possible, abort.
464	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
465	IF ( TRIM( topography ) /= 'single_building' .AND. &
466	TRIM( topography ) /= 'single_street_canyon' .AND. &
467	TRIM( topography ) /= 'read_from_file' ) THEN
468	!-- The default value is not applicable here, because it is only valid
469	!-- for the two standard cases 'single_building' and 'read_from_file'
470	!-- defined in init_grid.
471	WRITE( message_string, * ) &
472	'The value for "topography_grid_convention" ', &
473	'is not set. Its default value is & only valid for ', &
474	'"topography" = ''single_building'', ', &
475	'''single_street_canyon'' & or ''read_from_file''.', &
476	' & Choose ''cell_edge'' or ''cell_center''.'
477	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
478	ELSE
479	!-- The default value is applicable here.
480	!-- Set convention according to topography.
481	IF ( TRIM( topography ) == 'single_building' .OR. &
482	TRIM( topography ) == 'single_street_canyon' ) THEN
483	topography_grid_convention = 'cell_edge'
484	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
485	topography_grid_convention = 'cell_center'
486	ENDIF
487	ENDIF
488	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
489	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
490	WRITE( message_string, * ) &
491	'The value for "topography_grid_convention" is ', &
492	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
493	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
494	ENDIF
495
496	ENDIF
497
498	!
499	!-- Check ocean setting
500	IF ( ocean ) THEN
501
502	action = ' '
503	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
504	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
505	ENDIF
506	IF ( momentum_advec == 'ups-scheme' ) THEN
507	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
508	ENDIF
509	IF ( action /= ' ' ) THEN
510	message_string = 'ocean = .T. does not allow ' // TRIM( action )
511	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
512	ENDIF
513
514	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
515	TRIM( coupling_char ) == '_O' ) THEN
516
517	!
518	!-- Check whether an (uncoupled) atmospheric run has been declared as an
519	!-- ocean run (this setting is done via mrun-option -y)
520
521	message_string = 'ocean = .F. does not allow coupling_char = "' // &
522	TRIM( coupling_char ) // '" set by mrun-option "-y"'
523	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
524
525	ENDIF
526
527	!
528	!-- Check whether there are any illegal values
529	!-- Pressure solver:
530	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
531	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
532	message_string = 'unknown solver for perturbation pressure: psolver' // &
533	' = "' // TRIM( psolver ) // '"'
534	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
535	ENDIF
536
537	#if defined( __parallel )
538	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
539	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
540	'for a 1d domain-decomposition along x & please do' // &
541	' not set npey/=1 in the parameter file'
542	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
543	ENDIF
544	IF ( psolver == 'poisfft_hybrid' .AND. &
545	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
546	psolver == 'multigrid' .AND. &
547	( nxra > nxr .OR. nyna > nyn ) ) THEN
548	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
549	'work for subdomains with unequal size & please ' // &
550	'set grid_matching = ''strict'' in the parameter file'
551	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
552	ENDIF
553	#else
554	IF ( psolver == 'poisfft_hybrid' ) THEN
555	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
556	' for a parallel environment'
557	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
558	ENDIF
559	#endif
560
561	IF ( psolver == 'multigrid' ) THEN
562	IF ( cycle_mg == 'w' ) THEN
563	gamma_mg = 2
564	ELSEIF ( cycle_mg == 'v' ) THEN
565	gamma_mg = 1
566	ELSE
567	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
568	TRIM( cycle_mg ) // '"'
569	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
570	ENDIF
571	ENDIF
572
573	IF ( fft_method /= 'singleton-algorithm' .AND. &
574	fft_method /= 'temperton-algorithm' .AND. &
575	fft_method /= 'system-specific' ) THEN
576	message_string = 'unknown fft-algorithm: fft_method = "' // &
577	TRIM( fft_method ) // '"'
578	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
579	ENDIF
580
581	IF( momentum_advec == 'ws-scheme' .AND. &
582	.NOT. call_psolver_at_all_substeps ) THEN
583	message_string = 'psolver must be called at each RK3 substep when "'//&
584	TRIM(momentum_advec) // ' "is used for momentum_advec'
585	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
586	END IF
587	!
588	!-- Advection schemes:
589	!
590	!-- Set the LOGICALS to enhance the performance.
591	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
592	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
593
594	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
595	momentum_advec /= 'ups-scheme' ) THEN
596	message_string = 'unknown advection scheme: momentum_advec = "' // &
597	TRIM( momentum_advec ) // '"'
598	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
599	ENDIF
600	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
601	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
602	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
603	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
604	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
605	message_string = 'momentum_advec or scalar_advec = "' &
606	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
607	TRIM( timestep_scheme ) // '"'
608	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
609	ENDIF
610	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
611	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
612	message_string = 'unknown advection scheme: scalar_advec = "' // &
613	TRIM( scalar_advec ) // '"'
614	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
618	use_upstream_for_tke = .TRUE.
619	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
620	'use_sgs_for_particles = .TRUE.'
621	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
622	ENDIF
623
624	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
625	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
626	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
627	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
628	ENDIF
629
630	!
631	!-- Timestep schemes:
632	SELECT CASE ( TRIM( timestep_scheme ) )
633
634	CASE ( 'euler' )
635	intermediate_timestep_count_max = 1
636	asselin_filter_factor = 0.0
637
638	CASE ( 'leapfrog', 'leapfrog+euler' )
639	intermediate_timestep_count_max = 1
640
641	CASE ( 'runge-kutta-2' )
642	intermediate_timestep_count_max = 2
643	asselin_filter_factor = 0.0
644
645	CASE ( 'runge-kutta-3' )
646	intermediate_timestep_count_max = 3
647	asselin_filter_factor = 0.0
648
649	CASE DEFAULT
650	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
651	TRIM( timestep_scheme ) // '"'
652	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
653
654	END SELECT
655
656	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
657	THEN
658	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
659	'" & does not work with timestep_scheme "' // &
660	TRIM( timestep_scheme ) // '"'
661	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
662	ENDIF
663
664	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
665	.AND. timestep_scheme(1:5) == 'runge' ) THEN
666	message_string = 'momentum advection scheme "' // &
667	TRIM( momentum_advec ) // '" & does not work with ' // &
668	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
669	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
670	ENDIF
671
672	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
673	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
674	!
675	!-- No restart run: several initialising actions are possible
676	action = initializing_actions
677	DO WHILE ( TRIM( action ) /= '' )
678	position = INDEX( action, ' ' )
679	SELECT CASE ( action(1:position-1) )
680
681	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
682	'by_user', 'initialize_vortex', 'initialize_ptanom' )
683	action = action(position+1:)
684
685	CASE DEFAULT
686	message_string = 'initializing_action = "' // &
687	TRIM( action ) // '" unkown or not allowed'
688	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
689
690	END SELECT
691	ENDDO
692	ENDIF
693
694	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
695	conserve_volume_flow ) THEN
696	message_string = 'initializing_actions = "initialize_vortex"' // &
697	' ist not allowed with conserve_volume_flow = .T.'
698	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
699	ENDIF
700
701
702	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
703	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
704	message_string = 'initializing_actions = "set_constant_profiles"' // &
705	' and "set_1d-model_profiles" are not allowed ' // &
706	'simultaneously'
707	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
708	ENDIF
709
710	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
711	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
712	message_string = 'initializing_actions = "set_constant_profiles"' // &
713	' and "by_user" are not allowed simultaneously'
714	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
715	ENDIF
716
717	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
718	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
719	message_string = 'initializing_actions = "by_user" and ' // &
720	'"set_1d-model_profiles" are not allowed simultaneously'
721	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
722	ENDIF
723
724	IF ( cloud_physics .AND. .NOT. humidity ) THEN
725	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
726	'not allowed with humidity = ', humidity
727	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
728	ENDIF
729
730	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
731	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
732	'not allowed with cloud_physics = ', cloud_physics
733	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
734	ENDIF
735
736	IF ( humidity .AND. sloping_surface ) THEN
737	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
738	'are not allowed simultaneously'
739	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
740	ENDIF
741
742	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
743	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
744	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
745	ENDIF
746
747	IF ( passive_scalar .AND. humidity ) THEN
748	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
749	'is not allowed simultaneously'
750	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
751	ENDIF
752
753	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
754	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
755	' = .TRUE.'
756	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
757	ENDIF
758
759	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
760	message_string = 'illegal value "' // TRIM( grid_matching ) // &
761	'" found for parameter grid_matching'
762	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
763	ENDIF
764
765	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
766	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
767	'coefficient & given value is drag_coefficient = 0.0'
768	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
769	ENDIF
770
771	!
772	!-- In case of no model continuation run, check initialising parameters and
773	!-- deduce further quantities
774	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
775
776	!
777	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
778	pt_init = pt_surface
779	IF ( humidity ) q_init = q_surface
780	IF ( ocean ) sa_init = sa_surface
781	IF ( passive_scalar ) q_init = s_surface
782	IF ( plant_canopy ) lad = 0.0
783
784	!
785	!--
786	!-- If required, compute initial profile of the geostrophic wind
787	!-- (component ug)
788	i = 1
789	gradient = 0.0
790
791	IF ( .NOT. ocean ) THEN
792
793	ug_vertical_gradient_level_ind(1) = 0
794	ug(0) = ug_surface
795	DO k = 1, nzt+1
796	IF ( i < 11 ) THEN
797	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
798	ug_vertical_gradient_level(i) >= 0.0 ) THEN
799	gradient = ug_vertical_gradient(i) / 100.0
800	ug_vertical_gradient_level_ind(i) = k - 1
801	i = i + 1
802	ENDIF
803	ENDIF
804	IF ( gradient /= 0.0 ) THEN
805	IF ( k /= 1 ) THEN
806	ug(k) = ug(k-1) + dzu(k) * gradient
807	ELSE
808	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
809	ENDIF
810	ELSE
811	ug(k) = ug(k-1)
812	ENDIF
813	ENDDO
814
815	ELSE
816
817	ug_vertical_gradient_level_ind(1) = nzt+1
818	ug(nzt+1) = ug_surface
819	DO k = nzt, nzb, -1
820	IF ( i < 11 ) THEN
821	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
822	ug_vertical_gradient_level(i) <= 0.0 ) THEN
823	gradient = ug_vertical_gradient(i) / 100.0
824	ug_vertical_gradient_level_ind(i) = k + 1
825	i = i + 1
826	ENDIF
827	ENDIF
828	IF ( gradient /= 0.0 ) THEN
829	IF ( k /= nzt ) THEN
830	ug(k) = ug(k+1) - dzu(k+1) * gradient
831	ELSE
832	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
833	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
834	ENDIF
835	ELSE
836	ug(k) = ug(k+1)
837	ENDIF
838	ENDDO
839
840	ENDIF
841
842	!
843	!-- In case of no given gradients for ug, choose a zero gradient
844	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
845	ug_vertical_gradient_level(1) = 0.0
846	ENDIF
847
848	!
849	!--
850	!-- If required, compute initial profile of the geostrophic wind
851	!-- (component vg)
852	i = 1
853	gradient = 0.0
854
855	IF ( .NOT. ocean ) THEN
856
857	vg_vertical_gradient_level_ind(1) = 0
858	vg(0) = vg_surface
859	DO k = 1, nzt+1
860	IF ( i < 11 ) THEN
861	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
862	vg_vertical_gradient_level(i) >= 0.0 ) THEN
863	gradient = vg_vertical_gradient(i) / 100.0
864	vg_vertical_gradient_level_ind(i) = k - 1
865	i = i + 1
866	ENDIF
867	ENDIF
868	IF ( gradient /= 0.0 ) THEN
869	IF ( k /= 1 ) THEN
870	vg(k) = vg(k-1) + dzu(k) * gradient
871	ELSE
872	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
873	ENDIF
874	ELSE
875	vg(k) = vg(k-1)
876	ENDIF
877	ENDDO
878
879	ELSE
880
881	vg_vertical_gradient_level_ind(1) = nzt+1
882	vg(nzt+1) = vg_surface
883	DO k = nzt, nzb, -1
884	IF ( i < 11 ) THEN
885	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
886	vg_vertical_gradient_level(i) <= 0.0 ) THEN
887	gradient = vg_vertical_gradient(i) / 100.0
888	vg_vertical_gradient_level_ind(i) = k + 1
889	i = i + 1
890	ENDIF
891	ENDIF
892	IF ( gradient /= 0.0 ) THEN
893	IF ( k /= nzt ) THEN
894	vg(k) = vg(k+1) - dzu(k+1) * gradient
895	ELSE
896	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
897	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
898	ENDIF
899	ELSE
900	vg(k) = vg(k+1)
901	ENDIF
902	ENDDO
903
904	ENDIF
905
906	!
907	!-- In case of no given gradients for vg, choose a zero gradient
908	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
909	vg_vertical_gradient_level(1) = 0.0
910	ENDIF
911
912	!
913	!-- Let the initial wind profiles be the calculated ug/vg profiles or
914	!-- interpolate them from wind profile data (if given)
915	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
916
917	u_init = ug
918	v_init = vg
919
920	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
921
922	IF ( uv_heights(1) /= 0.0 ) THEN
923	message_string = 'uv_heights(1) must be 0.0'
924	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
925	ENDIF
926
927	use_prescribed_profile_data = .TRUE.
928
929	kk = 1
930	u_init(0) = 0.0
931	v_init(0) = 0.0
932
933	DO k = 1, nz+1
934
935	IF ( kk < 100 ) THEN
936	DO WHILE ( uv_heights(kk+1) <= zu(k) )
937	kk = kk + 1
938	IF ( kk == 100 ) EXIT
939	ENDDO
940	ENDIF
941
942	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
943	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
944	( uv_heights(kk+1) - uv_heights(kk) ) * &
945	( u_profile(kk+1) - u_profile(kk) )
946	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
947	( uv_heights(kk+1) - uv_heights(kk) ) * &
948	( v_profile(kk+1) - v_profile(kk) )
949	ELSE
950	u_init(k) = u_profile(kk)
951	v_init(k) = v_profile(kk)
952	ENDIF
953
954	ENDDO
955
956	ELSE
957
958	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
959	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
960
961	ENDIF
962
963	!
964	!-- Compute initial temperature profile using the given temperature gradients
965	i = 1
966	gradient = 0.0
967
968	IF ( .NOT. ocean ) THEN
969
970	pt_vertical_gradient_level_ind(1) = 0
971	DO k = 1, nzt+1
972	IF ( i < 11 ) THEN
973	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
974	pt_vertical_gradient_level(i) >= 0.0 ) THEN
975	gradient = pt_vertical_gradient(i) / 100.0
976	pt_vertical_gradient_level_ind(i) = k - 1
977	i = i + 1
978	ENDIF
979	ENDIF
980	IF ( gradient /= 0.0 ) THEN
981	IF ( k /= 1 ) THEN
982	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
983	ELSE
984	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
985	ENDIF
986	ELSE
987	pt_init(k) = pt_init(k-1)
988	ENDIF
989	ENDDO
990
991	ELSE
992
993	pt_vertical_gradient_level_ind(1) = nzt+1
994	DO k = nzt, 0, -1
995	IF ( i < 11 ) THEN
996	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
997	pt_vertical_gradient_level(i) <= 0.0 ) THEN
998	gradient = pt_vertical_gradient(i) / 100.0
999	pt_vertical_gradient_level_ind(i) = k + 1
1000	i = i + 1
1001	ENDIF
1002	ENDIF
1003	IF ( gradient /= 0.0 ) THEN
1004	IF ( k /= nzt ) THEN
1005	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1006	ELSE
1007	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1008	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1009	ENDIF
1010	ELSE
1011	pt_init(k) = pt_init(k+1)
1012	ENDIF
1013	ENDDO
1014
1015	ENDIF
1016
1017	!
1018	!-- In case of no given temperature gradients, choose gradient of neutral
1019	!-- stratification
1020	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1021	pt_vertical_gradient_level(1) = 0.0
1022	ENDIF
1023
1024	!
1025	!-- Store temperature gradient at the top boundary for possible Neumann
1026	!-- boundary condition
1027	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1028
1029	!
1030	!-- If required, compute initial humidity or scalar profile using the given
1031	!-- humidity/scalar gradient. In case of scalar transport, initially store
1032	!-- values of the scalar parameters on humidity parameters
1033	IF ( passive_scalar ) THEN
1034	bc_q_b = bc_s_b
1035	bc_q_t = bc_s_t
1036	q_surface = s_surface
1037	q_surface_initial_change = s_surface_initial_change
1038	q_vertical_gradient = s_vertical_gradient
1039	q_vertical_gradient_level = s_vertical_gradient_level
1040	surface_waterflux = surface_scalarflux
1041	wall_humidityflux = wall_scalarflux
1042	ENDIF
1043
1044	IF ( humidity .OR. passive_scalar ) THEN
1045
1046	i = 1
1047	gradient = 0.0
1048	q_vertical_gradient_level_ind(1) = 0
1049	DO k = 1, nzt+1
1050	IF ( i < 11 ) THEN
1051	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1052	q_vertical_gradient_level(i) >= 0.0 ) THEN
1053	gradient = q_vertical_gradient(i) / 100.0
1054	q_vertical_gradient_level_ind(i) = k - 1
1055	i = i + 1
1056	ENDIF
1057	ENDIF
1058	IF ( gradient /= 0.0 ) THEN
1059	IF ( k /= 1 ) THEN
1060	q_init(k) = q_init(k-1) + dzu(k) * gradient
1061	ELSE
1062	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1063	ENDIF
1064	ELSE
1065	q_init(k) = q_init(k-1)
1066	ENDIF
1067	!
1068	!-- Avoid negative humidities
1069	IF ( q_init(k) < 0.0 ) THEN
1070	q_init(k) = 0.0
1071	ENDIF
1072	ENDDO
1073
1074	!
1075	!-- In case of no given humidity gradients, choose zero gradient
1076	!-- conditions
1077	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1078	q_vertical_gradient_level(1) = 0.0
1079	ENDIF
1080
1081	!
1082	!-- Store humidity gradient at the top boundary for possile Neumann
1083	!-- boundary condition
1084	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1085
1086	ENDIF
1087
1088	!
1089	!-- If required, compute initial salinity profile using the given salinity
1090	!-- gradients
1091	IF ( ocean ) THEN
1092
1093	i = 1
1094	gradient = 0.0
1095
1096	sa_vertical_gradient_level_ind(1) = nzt+1
1097	DO k = nzt, 0, -1
1098	IF ( i < 11 ) THEN
1099	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1100	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1101	gradient = sa_vertical_gradient(i) / 100.0
1102	sa_vertical_gradient_level_ind(i) = k + 1
1103	i = i + 1
1104	ENDIF
1105	ENDIF
1106	IF ( gradient /= 0.0 ) THEN
1107	IF ( k /= nzt ) THEN
1108	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1109	ELSE
1110	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1111	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1112	ENDIF
1113	ELSE
1114	sa_init(k) = sa_init(k+1)
1115	ENDIF
1116	ENDDO
1117
1118	ENDIF
1119
1120	!
1121	!-- If required compute the profile of leaf area density used in the plant
1122	!-- canopy model
1123	IF ( plant_canopy ) THEN
1124
1125	i = 1
1126	gradient = 0.0
1127
1128	IF ( .NOT. ocean ) THEN
1129
1130	lad(0) = lad_surface
1131
1132	lad_vertical_gradient_level_ind(1) = 0
1133	DO k = 1, pch_index
1134	IF ( i < 11 ) THEN
1135	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1136	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1137	gradient = lad_vertical_gradient(i)
1138	lad_vertical_gradient_level_ind(i) = k - 1
1139	i = i + 1
1140	ENDIF
1141	ENDIF
1142	IF ( gradient /= 0.0 ) THEN
1143	IF ( k /= 1 ) THEN
1144	lad(k) = lad(k-1) + dzu(k) * gradient
1145	ELSE
1146	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1147	ENDIF
1148	ELSE
1149	lad(k) = lad(k-1)
1150	ENDIF
1151	ENDDO
1152
1153	ENDIF
1154
1155	!
1156	!-- In case of no given leaf area density gradients, choose a vanishing
1157	!-- gradient
1158	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1159	lad_vertical_gradient_level(1) = 0.0
1160	ENDIF
1161
1162	ENDIF
1163
1164	ENDIF
1165
1166	!
1167	!-- Initialize large scale subsidence if required
1168	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1169	large_scale_subsidence = .TRUE.
1170	CALL init_w_subsidence
1171	END IF
1172
1173
1174
1175	!
1176	!-- Compute Coriolis parameter
1177	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1178	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1179
1180	!
1181	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1182	!-- set the reference temperature equal to the surface temperature.
1183	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1184
1185	!
1186	!-- Reference value has to be used in buoyancy terms
1187	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1188
1189	!
1190	!-- Sign of buoyancy/stability terms
1191	IF ( ocean ) atmos_ocean_sign = -1.0
1192
1193	!
1194	!-- Ocean version must use flux boundary conditions at the top
1195	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1196	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1197	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1198	ENDIF
1199
1200	!
1201	!-- In case of a given slope, compute the relevant quantities
1202	IF ( alpha_surface /= 0.0 ) THEN
1203	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1204	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1205	' ) must be < 90.0'
1206	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1207	ENDIF
1208	sloping_surface = .TRUE.
1209	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1210	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1211	ENDIF
1212
1213	!
1214	!-- Check time step and cfl_factor
1215	IF ( dt /= -1.0 ) THEN
1216	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1217	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1218	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1219	ENDIF
1220	dt_3d = dt
1221	dt_fixed = .TRUE.
1222	ENDIF
1223
1224	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1225	IF ( cfl_factor == -1.0 ) THEN
1226	IF ( momentum_advec == 'ups-scheme' .OR. &
1227	scalar_advec == 'ups-scheme' ) THEN
1228	cfl_factor = 0.8
1229	ELSE
1230	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1231	cfl_factor = 0.8
1232	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1233	cfl_factor = 0.9
1234	ELSE
1235	cfl_factor = 0.1
1236	ENDIF
1237	ENDIF
1238	ELSE
1239	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1240	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1241	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1242	ENDIF
1243	ENDIF
1244
1245	!
1246	!-- Store simulated time at begin
1247	simulated_time_at_begin = simulated_time
1248
1249	!
1250	!-- Store reference time for coupled runs and change the coupling flag,
1251	!-- if ...
1252	IF ( simulated_time == 0.0 ) THEN
1253	IF ( coupling_start_time == 0.0 ) THEN
1254	time_since_reference_point = 0.0
1255	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1256	run_coupled = .FALSE.
1257	ENDIF
1258	ENDIF
1259
1260	!
1261	!-- Set wind speed in the Galilei-transformed system
1262	IF ( galilei_transformation ) THEN
1263	IF ( use_ug_for_galilei_tr .AND. &
1264	ug_vertical_gradient_level(1) == 0.0 .AND. &
1265	vg_vertical_gradient_level(1) == 0.0 ) THEN
1266	u_gtrans = ug_surface
1267	v_gtrans = vg_surface
1268	ELSEIF ( use_ug_for_galilei_tr .AND. &
1269	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1270	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1271	' with galilei transformation'
1272	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1273	ELSEIF ( use_ug_for_galilei_tr .AND. &
1274	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1275	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1276	' with galilei transformation'
1277	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1278	ELSE
1279	message_string = 'variable translation speed used for galilei-' // &
1280	'transformation, which may cause & instabilities in stably ' // &
1281	'stratified regions'
1282	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1283	ENDIF
1284	ENDIF
1285
1286	!
1287	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1288	!-- fluxes have to be used in the diffusion-terms
1289	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1290
1291	!
1292	!-- Check boundary conditions and set internal variables:
1293	!-- Lateral boundary conditions
1294	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1295	bc_lr /= 'radiation/dirichlet' ) THEN
1296	message_string = 'unknown boundary condition: bc_lr = "' // &
1297	TRIM( bc_lr ) // '"'
1298	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1299	ENDIF
1300	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1301	bc_ns /= 'radiation/dirichlet' ) THEN
1302	message_string = 'unknown boundary condition: bc_ns = "' // &
1303	TRIM( bc_ns ) // '"'
1304	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1305	ENDIF
1306
1307	!
1308	!-- Internal variables used for speed optimization in if clauses
1309	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1310	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1311	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1312	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1313	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1314	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1315
1316	!
1317	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1318	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1319	!-- and tools do not work with non-cyclic boundary conditions.
1320	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1321	IF ( psolver /= 'multigrid' ) THEN
1322	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1323	'psolver = "' // TRIM( psolver ) // '"'
1324	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1325	ENDIF
1326	IF ( momentum_advec /= 'pw-scheme' .AND. &
1327	momentum_advec /= 'ws-scheme') THEN
1328	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1329	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1330	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1331	ENDIF
1332	IF ( scalar_advec /= 'pw-scheme' .AND. &
1333	scalar_advec /= 'ws-scheme' ) THEN
1334	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1335	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1336	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1337	ENDIF
1338	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
1339	.AND. loop_optimization == 'vector' ) THEN
1340	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1341	'loop_optimization = vector and ' // &
1342	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1343	! The error message number still needs modification.
1344	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
1345	END IF
1346	IF ( galilei_transformation ) THEN
1347	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1348	'galilei_transformation = .T.'
1349	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1350	ENDIF
1351	ENDIF
1352
1353	!
1354	!-- Bottom boundary condition for the turbulent Kinetic energy
1355	IF ( bc_e_b == 'neumann' ) THEN
1356	ibc_e_b = 1
1357	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1358	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1359	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1360	ENDIF
1361	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1362	ibc_e_b = 2
1363	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1364	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1365	TRIM( bc_e_b ) // '"'
1366	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1367	ENDIF
1368	IF ( .NOT. prandtl_layer ) THEN
1369	bc_e_b = 'neumann'
1370	ibc_e_b = 1
1371	message_string = 'boundary condition bc_e_b changed to "' // &
1372	TRIM( bc_e_b ) // '"'
1373	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1374	ENDIF
1375	ELSE
1376	message_string = 'unknown boundary condition: bc_e_b = "' // &
1377	TRIM( bc_e_b ) // '"'
1378	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1379	ENDIF
1380
1381	!
1382	!-- Boundary conditions for perturbation pressure
1383	IF ( bc_p_b == 'dirichlet' ) THEN
1384	ibc_p_b = 0
1385	ELSEIF ( bc_p_b == 'neumann' ) THEN
1386	ibc_p_b = 1
1387	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1388	ibc_p_b = 2
1389	ELSE
1390	message_string = 'unknown boundary condition: bc_p_b = "' // &
1391	TRIM( bc_p_b ) // '"'
1392	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1393	ENDIF
1394	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1395	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1396	'" not allowed with prandtl_layer = .FALSE.'
1397	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1398	ENDIF
1399	IF ( bc_p_t == 'dirichlet' ) THEN
1400	ibc_p_t = 0
1401	ELSEIF ( bc_p_t == 'neumann' ) THEN
1402	ibc_p_t = 1
1403	ELSE
1404	message_string = 'unknown boundary condition: bc_p_t = "' // &
1405	TRIM( bc_p_t ) // '"'
1406	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1407	ENDIF
1408
1409	!
1410	!-- Boundary conditions for potential temperature
1411	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1412	ibc_pt_b = 2
1413	ELSE
1414	IF ( bc_pt_b == 'dirichlet' ) THEN
1415	ibc_pt_b = 0
1416	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1417	ibc_pt_b = 1
1418	ELSE
1419	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1420	TRIM( bc_pt_b ) // '"'
1421	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1422	ENDIF
1423	ENDIF
1424
1425	IF ( bc_pt_t == 'dirichlet' ) THEN
1426	ibc_pt_t = 0
1427	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1428	ibc_pt_t = 1
1429	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1430	ibc_pt_t = 2
1431	ELSE
1432	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1433	TRIM( bc_pt_t ) // '"'
1434	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1435	ENDIF
1436
1437	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1438	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1439	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1440	top_momentumflux_v /= 9999999.9 ) THEN
1441	constant_top_momentumflux = .TRUE.
1442	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1443	top_momentumflux_v == 9999999.9 ) ) THEN
1444	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1445	'must be set'
1446	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1447	ENDIF
1448
1449	!
1450	!-- A given surface temperature implies Dirichlet boundary condition for
1451	!-- temperature. In this case specification of a constant heat flux is
1452	!-- forbidden.
1453	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1454	surface_heatflux /= 0.0 ) THEN
1455	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1456	'& is not allowed with constant_heatflux = .TRUE.'
1457	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1458	ENDIF
1459	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1460	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1461	'wed with pt_surface_initial_change (/=0) = ', &
1462	pt_surface_initial_change
1463	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1464	ENDIF
1465
1466	!
1467	!-- A given temperature at the top implies Dirichlet boundary condition for
1468	!-- temperature. In this case specification of a constant heat flux is
1469	!-- forbidden.
1470	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1471	top_heatflux /= 0.0 ) THEN
1472	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1473	'" is not allowed with constant_top_heatflux = .TRUE.'
1474	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1475	ENDIF
1476
1477	!
1478	!-- Boundary conditions for salinity
1479	IF ( ocean ) THEN
1480	IF ( bc_sa_t == 'dirichlet' ) THEN
1481	ibc_sa_t = 0
1482	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1483	ibc_sa_t = 1
1484	ELSE
1485	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1486	TRIM( bc_sa_t ) // '"'
1487	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1488	ENDIF
1489
1490	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1491	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1492	message_string = 'boundary condition: bc_sa_t = "' // &
1493	TRIM( bc_sa_t ) // '" requires to set ' // &
1494	'top_salinityflux'
1495	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1496	ENDIF
1497
1498	!
1499	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1500	!-- salinity. In this case specification of a constant salinity flux is
1501	!-- forbidden.
1502	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1503	top_salinityflux /= 0.0 ) THEN
1504	message_string = 'boundary condition: bc_sa_t = "' // &
1505	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1506	'constant_top_salinityflux = .TRUE.'
1507	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1508	ENDIF
1509
1510	ENDIF
1511
1512	!
1513	!-- In case of humidity or passive scalar, set boundary conditions for total
1514	!-- water content / scalar
1515	IF ( humidity .OR. passive_scalar ) THEN
1516	IF ( humidity ) THEN
1517	sq = 'q'
1518	ELSE
1519	sq = 's'
1520	ENDIF
1521	IF ( bc_q_b == 'dirichlet' ) THEN
1522	ibc_q_b = 0
1523	ELSEIF ( bc_q_b == 'neumann' ) THEN
1524	ibc_q_b = 1
1525	ELSE
1526	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1527	'_b ="' // TRIM( bc_q_b ) // '"'
1528	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1529	ENDIF
1530	IF ( bc_q_t == 'dirichlet' ) THEN
1531	ibc_q_t = 0
1532	ELSEIF ( bc_q_t == 'neumann' ) THEN
1533	ibc_q_t = 1
1534	ELSE
1535	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1536	'_t ="' // TRIM( bc_q_t ) // '"'
1537	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1538	ENDIF
1539
1540	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1541
1542	!
1543	!-- A given surface humidity implies Dirichlet boundary condition for
1544	!-- humidity. In this case specification of a constant water flux is
1545	!-- forbidden.
1546	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1547	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1548	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1549	'th prescribed surface flux'
1550	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1551	ENDIF
1552	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1553	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1554	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1555	q_surface_initial_change
1556	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1557	ENDIF
1558
1559	ENDIF
1560
1561	!
1562	!-- Boundary conditions for horizontal components of wind speed
1563	IF ( bc_uv_b == 'dirichlet' ) THEN
1564	ibc_uv_b = 0
1565	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1566	ibc_uv_b = 1
1567	IF ( prandtl_layer ) THEN
1568	message_string = 'boundary condition: bc_uv_b = "' // &
1569	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1570	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1571	ENDIF
1572	ELSE
1573	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1574	TRIM( bc_uv_b ) // '"'
1575	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1576	ENDIF
1577	!
1578	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1579	!-- assigned with the u and v values of the ocean surface
1580	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1581	ibc_uv_b = 2
1582	ENDIF
1583
1584	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1585	bc_uv_t = 'neumann'
1586	ibc_uv_t = 1
1587	ELSE
1588	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1589	ibc_uv_t = 0
1590	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1591	!
1592	!-- Velocities for the initial u,v-profiles are set zero at the top
1593	!-- in case of dirichlet_0 conditions
1594	u_init(nzt+1) = 0.0
1595	v_init(nzt+1) = 0.0
1596	ENDIF
1597	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1598	ibc_uv_t = 1
1599	ELSE
1600	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1601	TRIM( bc_uv_t ) // '"'
1602	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1603	ENDIF
1604	ENDIF
1605
1606	!
1607	!-- Compute and check, respectively, the Rayleigh Damping parameter
1608	IF ( rayleigh_damping_factor == -1.0 ) THEN
1609	IF ( momentum_advec == 'ups-scheme' ) THEN
1610	rayleigh_damping_factor = 0.01
1611	ELSE
1612	rayleigh_damping_factor = 0.0
1613	ENDIF
1614	ELSE
1615	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1616	THEN
1617	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1618	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1619	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1620	ENDIF
1621	ENDIF
1622
1623	IF ( rayleigh_damping_height == -1.0 ) THEN
1624	IF ( .NOT. ocean ) THEN
1625	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1626	ELSE
1627	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1628	ENDIF
1629	ELSE
1630	IF ( .NOT. ocean ) THEN
1631	IF ( rayleigh_damping_height < 0.0 .OR. &
1632	rayleigh_damping_height > zu(nzt) ) THEN
1633	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1634	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1635	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1636	ENDIF
1637	ELSE
1638	IF ( rayleigh_damping_height > 0.0 .OR. &
1639	rayleigh_damping_height < zu(nzb) ) THEN
1640	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1641	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1642	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1643	ENDIF
1644	ENDIF
1645	ENDIF
1646
1647	!
1648	!-- Check limiters for Upstream-Spline scheme
1649	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1650	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1651	overshoot_limit_e < 0.0 ) THEN
1652	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1653	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1654	ENDIF
1655	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1656	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1657	message_string = 'ups_limit_... < 0.0 is not allowed'
1658	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1659	ENDIF
1660
1661	!
1662	!-- Check number of chosen statistic regions. More than 10 regions are not
1663	!-- allowed, because so far no more than 10 corresponding output files can
1664	!-- be opened (cf. check_open)
1665	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1666	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1667	statistic_regions+1, ' but only 10 regions are allowed'
1668	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1669	ENDIF
1670	IF ( normalizing_region > statistic_regions .OR. &
1671	normalizing_region < 0) THEN
1672	WRITE ( message_string, * ) 'normalizing_region = ', &
1673	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1674	' (value of statistic_regions)'
1675	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1676	ENDIF
1677
1678	!
1679	!-- Check the interval for sorting particles.
1680	!-- Using particles as cloud droplets requires sorting after each timestep.
1681	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1682	dt_sort_particles = 0.0
1683	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1684	'_droplets = .TRUE.'
1685	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1686	ENDIF
1687
1688	!
1689	!-- Set the default intervals for data output, if necessary
1690	!-- NOTE: dt_dosp has already been set in package_parin
1691	IF ( dt_data_output /= 9999999.9 ) THEN
1692	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1693	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1694	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1695	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1696	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1697	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1698	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1699	DO mid = 1, max_masks
1700	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1701	ENDDO
1702	ENDIF
1703
1704	!
1705	!-- Set the default skip time intervals for data output, if necessary
1706	IF ( skip_time_dopr == 9999999.9 ) &
1707	skip_time_dopr = skip_time_data_output
1708	IF ( skip_time_dosp == 9999999.9 ) &
1709	skip_time_dosp = skip_time_data_output
1710	IF ( skip_time_do2d_xy == 9999999.9 ) &
1711	skip_time_do2d_xy = skip_time_data_output
1712	IF ( skip_time_do2d_xz == 9999999.9 ) &
1713	skip_time_do2d_xz = skip_time_data_output
1714	IF ( skip_time_do2d_yz == 9999999.9 ) &
1715	skip_time_do2d_yz = skip_time_data_output
1716	IF ( skip_time_do3d == 9999999.9 ) &
1717	skip_time_do3d = skip_time_data_output
1718	IF ( skip_time_data_output_av == 9999999.9 ) &
1719	skip_time_data_output_av = skip_time_data_output
1720	DO mid = 1, max_masks
1721	IF ( skip_time_domask(mid) == 9999999.9 ) &
1722	skip_time_domask(mid) = skip_time_data_output
1723	ENDDO
1724
1725	!
1726	!-- Check the average intervals (first for 3d-data, then for profiles and
1727	!-- spectra)
1728	IF ( averaging_interval > dt_data_output_av ) THEN
1729	WRITE( message_string, * ) 'averaging_interval = ', &
1730	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1731	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1732	ENDIF
1733
1734	IF ( averaging_interval_pr == 9999999.9 ) THEN
1735	averaging_interval_pr = averaging_interval
1736	ENDIF
1737
1738	IF ( averaging_interval_pr > dt_dopr ) THEN
1739	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1740	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1741	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1742	ENDIF
1743
1744	IF ( averaging_interval_sp == 9999999.9 ) THEN
1745	averaging_interval_sp = averaging_interval
1746	ENDIF
1747
1748	IF ( averaging_interval_sp > dt_dosp ) THEN
1749	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1750	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1751	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1752	ENDIF
1753
1754	!
1755	!-- Set the default interval for profiles entering the temporal average
1756	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1757	dt_averaging_input_pr = dt_averaging_input
1758	ENDIF
1759
1760	!
1761	!-- Set the default interval for the output of timeseries to a reasonable
1762	!-- value (tries to minimize the number of calls of flow_statistics)
1763	IF ( dt_dots == 9999999.9 ) THEN
1764	IF ( averaging_interval_pr == 0.0 ) THEN
1765	dt_dots = MIN( dt_run_control, dt_dopr )
1766	ELSE
1767	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1768	ENDIF
1769	ENDIF
1770
1771	!
1772	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1773	IF ( dt_averaging_input > averaging_interval ) THEN
1774	WRITE( message_string, * ) 'dt_averaging_input = ', &
1775	dt_averaging_input, ' must be <= averaging_interval = ', &
1776	averaging_interval
1777	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1778	ENDIF
1779
1780	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1781	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1782	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1783	averaging_interval_pr
1784	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1785	ENDIF
1786
1787	!
1788	!-- Set the default value for the integration interval of precipitation amount
1789	IF ( precipitation ) THEN
1790	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1791	precipitation_amount_interval = dt_do2d_xy
1792	ELSE
1793	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1794	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1795	precipitation_amount_interval, ' must not be larger than ', &
1796	'dt_do2d_xy = ', dt_do2d_xy
1797	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1798	ENDIF
1799	ENDIF
1800	ENDIF
1801
1802	!
1803	!-- Determine the number of output profiles and check whether they are
1804	!-- permissible
1805	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1806
1807	dopr_n = dopr_n + 1
1808	i = dopr_n
1809
1810	!
1811	!-- Determine internal profile number (for hom, homs)
1812	!-- and store height levels
1813	SELECT CASE ( TRIM( data_output_pr(i) ) )
1814
1815	CASE ( 'u', '#u' )
1816	dopr_index(i) = 1
1817	dopr_unit(i) = 'm/s'
1818	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1819	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1820	dopr_initial_index(i) = 5
1821	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1822	data_output_pr(i) = data_output_pr(i)(2:)
1823	ENDIF
1824
1825	CASE ( 'v', '#v' )
1826	dopr_index(i) = 2
1827	dopr_unit(i) = 'm/s'
1828	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1829	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1830	dopr_initial_index(i) = 6
1831	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1832	data_output_pr(i) = data_output_pr(i)(2:)
1833	ENDIF
1834
1835	CASE ( 'w' )
1836	dopr_index(i) = 3
1837	dopr_unit(i) = 'm/s'
1838	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1839
1840	CASE ( 'pt', '#pt' )
1841	IF ( .NOT. cloud_physics ) THEN
1842	dopr_index(i) = 4
1843	dopr_unit(i) = 'K'
1844	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1845	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1846	dopr_initial_index(i) = 7
1847	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1848	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1849	data_output_pr(i) = data_output_pr(i)(2:)
1850	ENDIF
1851	ELSE
1852	dopr_index(i) = 43
1853	dopr_unit(i) = 'K'
1854	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1855	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1856	dopr_initial_index(i) = 28
1857	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1858	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1859	data_output_pr(i) = data_output_pr(i)(2:)
1860	ENDIF
1861	ENDIF
1862
1863	CASE ( 'e' )
1864	dopr_index(i) = 8
1865	dopr_unit(i) = 'm2/s2'
1866	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1867	hom(nzb,2,8,:) = 0.0
1868
1869	CASE ( 'km', '#km' )
1870	dopr_index(i) = 9
1871	dopr_unit(i) = 'm2/s'
1872	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1873	hom(nzb,2,9,:) = 0.0
1874	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1875	dopr_initial_index(i) = 23
1876	hom(:,2,23,:) = hom(:,2,9,:)
1877	data_output_pr(i) = data_output_pr(i)(2:)
1878	ENDIF
1879
1880	CASE ( 'kh', '#kh' )
1881	dopr_index(i) = 10
1882	dopr_unit(i) = 'm2/s'
1883	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1884	hom(nzb,2,10,:) = 0.0
1885	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1886	dopr_initial_index(i) = 24
1887	hom(:,2,24,:) = hom(:,2,10,:)
1888	data_output_pr(i) = data_output_pr(i)(2:)
1889	ENDIF
1890
1891	CASE ( 'l', '#l' )
1892	dopr_index(i) = 11
1893	dopr_unit(i) = 'm'
1894	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1895	hom(nzb,2,11,:) = 0.0
1896	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1897	dopr_initial_index(i) = 25
1898	hom(:,2,25,:) = hom(:,2,11,:)
1899	data_output_pr(i) = data_output_pr(i)(2:)
1900	ENDIF
1901
1902	CASE ( 'w"u"' )
1903	dopr_index(i) = 12
1904	dopr_unit(i) = 'm2/s2'
1905	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1906	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1907
1908	CASE ( 'wu' )
1909	dopr_index(i) = 13
1910	dopr_unit(i) = 'm2/s2'
1911	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1912
1913	CASE ( 'w"v"' )
1914	dopr_index(i) = 14
1915	dopr_unit(i) = 'm2/s2'
1916	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1917	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1918
1919	CASE ( 'wv' )
1920	dopr_index(i) = 15
1921	dopr_unit(i) = 'm2/s2'
1922	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1923
1924	CASE ( 'w"pt"' )
1925	dopr_index(i) = 16
1926	dopr_unit(i) = 'K m/s'
1927	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1928
1929	CASE ( 'wpt' )
1930	dopr_index(i) = 17
1931	dopr_unit(i) = 'K m/s'
1932	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1933
1934	CASE ( 'wpt' )
1935	dopr_index(i) = 18
1936	dopr_unit(i) = 'K m/s'
1937	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1938
1939	CASE ( 'wu' )
1940	dopr_index(i) = 19
1941	dopr_unit(i) = 'm2/s2'
1942	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1943	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1944
1945	CASE ( 'wv' )
1946	dopr_index(i) = 20
1947	dopr_unit(i) = 'm2/s2'
1948	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1949	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1950
1951	CASE ( 'wptBC' )
1952	dopr_index(i) = 21
1953	dopr_unit(i) = 'K m/s'
1954	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1955
1956	CASE ( 'wptBC' )
1957	dopr_index(i) = 22
1958	dopr_unit(i) = 'K m/s'
1959	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1960
1961	CASE ( 'sa', '#sa' )
1962	IF ( .NOT. ocean ) THEN
1963	message_string = 'data_output_pr = ' // &
1964	TRIM( data_output_pr(i) ) // ' is not imp' // &
1965	'lemented for ocean = .FALSE.'
1966	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1967	ELSE
1968	dopr_index(i) = 23
1969	dopr_unit(i) = 'psu'
1970	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1971	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1972	dopr_initial_index(i) = 26
1973	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1974	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1975	data_output_pr(i) = data_output_pr(i)(2:)
1976	ENDIF
1977	ENDIF
1978
1979	CASE ( 'u*2' )
1980	dopr_index(i) = 30
1981	dopr_unit(i) = 'm2/s2'
1982	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1983
1984	CASE ( 'v*2' )
1985	dopr_index(i) = 31
1986	dopr_unit(i) = 'm2/s2'
1987	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1988
1989	CASE ( 'w*2' )
1990	dopr_index(i) = 32
1991	dopr_unit(i) = 'm2/s2'
1992	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1993
1994	CASE ( 'pt*2' )
1995	dopr_index(i) = 33
1996	dopr_unit(i) = 'K2'
1997	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1998
1999	CASE ( 'e*' )
2000	dopr_index(i) = 34
2001	dopr_unit(i) = 'm2/s2'
2002	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2003
2004	CASE ( 'w2pt' )
2005	dopr_index(i) = 35
2006	dopr_unit(i) = 'K m2/s2'
2007	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2008
2009	CASE ( 'wpt2' )
2010	dopr_index(i) = 36
2011	dopr_unit(i) = 'K2 m/s'
2012	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2013
2014	CASE ( 'we' )
2015	dopr_index(i) = 37
2016	dopr_unit(i) = 'm3/s3'
2017	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2018
2019	CASE ( 'w*3' )
2020	dopr_index(i) = 38
2021	dopr_unit(i) = 'm3/s3'
2022	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2023
2024	CASE ( 'Sw' )
2025	dopr_index(i) = 39
2026	dopr_unit(i) = 'none'
2027	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2028
2029	CASE ( 'p' )
2030	dopr_index(i) = 40
2031	dopr_unit(i) = 'Pa'
2032	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2033
2034	CASE ( 'q', '#q' )
2035	IF ( .NOT. humidity ) THEN
2036	message_string = 'data_output_pr = ' // &
2037	TRIM( data_output_pr(i) ) // ' is not imp' // &
2038	'lemented for humidity = .FALSE.'
2039	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2040	ELSE
2041	dopr_index(i) = 41
2042	dopr_unit(i) = 'kg/kg'
2043	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2044	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2045	dopr_initial_index(i) = 26
2046	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2047	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2048	data_output_pr(i) = data_output_pr(i)(2:)
2049	ENDIF
2050	ENDIF
2051
2052	CASE ( 's', '#s' )
2053	IF ( .NOT. passive_scalar ) THEN
2054	message_string = 'data_output_pr = ' // &
2055	TRIM( data_output_pr(i) ) // ' is not imp' // &
2056	'lemented for passive_scalar = .FALSE.'
2057	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2058	ELSE
2059	dopr_index(i) = 41
2060	dopr_unit(i) = 'kg/m3'
2061	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2062	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2063	dopr_initial_index(i) = 26
2064	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2065	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2066	data_output_pr(i) = data_output_pr(i)(2:)
2067	ENDIF
2068	ENDIF
2069
2070	CASE ( 'qv', '#qv' )
2071	IF ( .NOT. cloud_physics ) THEN
2072	dopr_index(i) = 41
2073	dopr_unit(i) = 'kg/kg'
2074	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2075	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2076	dopr_initial_index(i) = 26
2077	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2078	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2079	data_output_pr(i) = data_output_pr(i)(2:)
2080	ENDIF
2081	ELSE
2082	dopr_index(i) = 42
2083	dopr_unit(i) = 'kg/kg'
2084	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2085	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2086	dopr_initial_index(i) = 27
2087	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2088	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2089	data_output_pr(i) = data_output_pr(i)(2:)
2090	ENDIF
2091	ENDIF
2092
2093	CASE ( 'lpt', '#lpt' )
2094	IF ( .NOT. cloud_physics ) THEN
2095	message_string = 'data_output_pr = ' // &
2096	TRIM( data_output_pr(i) ) // ' is not imp' // &
2097	'lemented for cloud_physics = .FALSE.'
2098	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2099	ELSE
2100	dopr_index(i) = 4
2101	dopr_unit(i) = 'K'
2102	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2103	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2104	dopr_initial_index(i) = 7
2105	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2106	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2107	data_output_pr(i) = data_output_pr(i)(2:)
2108	ENDIF
2109	ENDIF
2110
2111	CASE ( 'vpt', '#vpt' )
2112	dopr_index(i) = 44
2113	dopr_unit(i) = 'K'
2114	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2115	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2116	dopr_initial_index(i) = 29
2117	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2118	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2119	data_output_pr(i) = data_output_pr(i)(2:)
2120	ENDIF
2121
2122	CASE ( 'w"vpt"' )
2123	dopr_index(i) = 45
2124	dopr_unit(i) = 'K m/s'
2125	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2126
2127	CASE ( 'wvpt' )
2128	dopr_index(i) = 46
2129	dopr_unit(i) = 'K m/s'
2130	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2131
2132	CASE ( 'wvpt' )
2133	dopr_index(i) = 47
2134	dopr_unit(i) = 'K m/s'
2135	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2136
2137	CASE ( 'w"q"' )
2138	IF ( .NOT. humidity ) THEN
2139	message_string = 'data_output_pr = ' // &
2140	TRIM( data_output_pr(i) ) // ' is not imp' // &
2141	'lemented for humidity = .FALSE.'
2142	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2143	ELSE
2144	dopr_index(i) = 48
2145	dopr_unit(i) = 'kg/kg m/s'
2146	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2147	ENDIF
2148
2149	CASE ( 'wq' )
2150	IF ( .NOT. humidity ) THEN
2151	message_string = 'data_output_pr = ' // &
2152	TRIM( data_output_pr(i) ) // ' is not imp' // &
2153	'lemented for humidity = .FALSE.'
2154	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2155	ELSE
2156	dopr_index(i) = 49
2157	dopr_unit(i) = 'kg/kg m/s'
2158	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2159	ENDIF
2160
2161	CASE ( 'wq' )
2162	IF ( .NOT. humidity ) THEN
2163	message_string = 'data_output_pr = ' // &
2164	TRIM( data_output_pr(i) ) // ' is not imp' // &
2165	'lemented for humidity = .FALSE.'
2166	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2167	ELSE
2168	dopr_index(i) = 50
2169	dopr_unit(i) = 'kg/kg m/s'
2170	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2171	ENDIF
2172
2173	CASE ( 'w"s"' )
2174	IF ( .NOT. passive_scalar ) THEN
2175	message_string = 'data_output_pr = ' // &
2176	TRIM( data_output_pr(i) ) // ' is not imp' // &
2177	'lemented for passive_scalar = .FALSE.'
2178	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2179	ELSE
2180	dopr_index(i) = 48
2181	dopr_unit(i) = 'kg/m3 m/s'
2182	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2183	ENDIF
2184
2185	CASE ( 'ws' )
2186	IF ( .NOT. passive_scalar ) THEN
2187	message_string = 'data_output_pr = ' // &
2188	TRIM( data_output_pr(i) ) // ' is not imp' // &
2189	'lemented for passive_scalar = .FALSE.'
2190	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2191	ELSE
2192	dopr_index(i) = 49
2193	dopr_unit(i) = 'kg/m3 m/s'
2194	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2195	ENDIF
2196
2197	CASE ( 'ws' )
2198	IF ( .NOT. passive_scalar ) THEN
2199	message_string = 'data_output_pr = ' // &
2200	TRIM( data_output_pr(i) ) // ' is not imp' // &
2201	'lemented for passive_scalar = .FALSE.'
2202	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2203	ELSE
2204	dopr_index(i) = 50
2205	dopr_unit(i) = 'kg/m3 m/s'
2206	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2207	ENDIF
2208
2209	CASE ( 'w"qv"' )
2210	IF ( humidity .AND. .NOT. cloud_physics ) &
2211	THEN
2212	dopr_index(i) = 48
2213	dopr_unit(i) = 'kg/kg m/s'
2214	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2215	ELSEIF( humidity .AND. cloud_physics ) THEN
2216	dopr_index(i) = 51
2217	dopr_unit(i) = 'kg/kg m/s'
2218	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2219	ELSE
2220	message_string = 'data_output_pr = ' // &
2221	TRIM( data_output_pr(i) ) // ' is not imp' // &
2222	'lemented for cloud_physics = .FALSE. an&' // &
2223	'd humidity = .FALSE.'
2224	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2225	ENDIF
2226
2227	CASE ( 'wqv' )
2228	IF ( humidity .AND. .NOT. cloud_physics ) &
2229	THEN
2230	dopr_index(i) = 49
2231	dopr_unit(i) = 'kg/kg m/s'
2232	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2233	ELSEIF( humidity .AND. cloud_physics ) THEN
2234	dopr_index(i) = 52
2235	dopr_unit(i) = 'kg/kg m/s'
2236	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2237	ELSE
2238	message_string = 'data_output_pr = ' // &
2239	TRIM( data_output_pr(i) ) // ' is not imp' // &
2240	'lemented for cloud_physics = .FALSE. an&' // &
2241	'd humidity = .FALSE.'
2242	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2243	ENDIF
2244
2245	CASE ( 'wqv' )
2246	IF ( humidity .AND. .NOT. cloud_physics ) &
2247	THEN
2248	dopr_index(i) = 50
2249	dopr_unit(i) = 'kg/kg m/s'
2250	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2251	ELSEIF( humidity .AND. cloud_physics ) THEN
2252	dopr_index(i) = 53
2253	dopr_unit(i) = 'kg/kg m/s'
2254	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2255	ELSE
2256	message_string = 'data_output_pr = ' // &
2257	TRIM( data_output_pr(i) ) // ' is not imp' // &
2258	'lemented for cloud_physics = .FALSE. an&' // &
2259	'd humidity = .FALSE.'
2260	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2261	ENDIF
2262
2263	CASE ( 'ql' )
2264	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2265	message_string = 'data_output_pr = ' // &
2266	TRIM( data_output_pr(i) ) // ' is not imp' // &
2267	'lemented for cloud_physics = .FALSE. or' // &
2268	'&cloud_droplets = .FALSE.'
2269	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2270	ELSE
2271	dopr_index(i) = 54
2272	dopr_unit(i) = 'kg/kg'
2273	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2274	ENDIF
2275
2276	CASE ( 'wuu*:dz' )
2277	dopr_index(i) = 55
2278	dopr_unit(i) = 'm2/s3'
2279	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2280
2281	CASE ( 'wp:dz' )
2282	dopr_index(i) = 56
2283	dopr_unit(i) = 'm2/s3'
2284	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2285
2286	CASE ( 'w"e:dz' )
2287	dopr_index(i) = 57
2288	dopr_unit(i) = 'm2/s3'
2289	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2290
2291
2292	CASE ( 'u"pt"' )
2293	dopr_index(i) = 58
2294	dopr_unit(i) = 'K m/s'
2295	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2296
2297	CASE ( 'upt' )
2298	dopr_index(i) = 59
2299	dopr_unit(i) = 'K m/s'
2300	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2301
2302	CASE ( 'upt_t' )
2303	dopr_index(i) = 60
2304	dopr_unit(i) = 'K m/s'
2305	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2306
2307	CASE ( 'v"pt"' )
2308	dopr_index(i) = 61
2309	dopr_unit(i) = 'K m/s'
2310	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2311
2312	CASE ( 'vpt' )
2313	dopr_index(i) = 62
2314	dopr_unit(i) = 'K m/s'
2315	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2316
2317	CASE ( 'vpt_t' )
2318	dopr_index(i) = 63
2319	dopr_unit(i) = 'K m/s'
2320	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2321
2322	CASE ( 'rho' )
2323	IF ( .NOT. ocean ) THEN
2324	message_string = 'data_output_pr = ' // &
2325	TRIM( data_output_pr(i) ) // ' is not imp' // &
2326	'lemented for ocean = .FALSE.'
2327	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2328	ELSE
2329	dopr_index(i) = 64
2330	dopr_unit(i) = 'kg/m3'
2331	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2332	ENDIF
2333
2334	CASE ( 'w"sa"' )
2335	IF ( .NOT. ocean ) THEN
2336	message_string = 'data_output_pr = ' // &
2337	TRIM( data_output_pr(i) ) // ' is not imp' // &
2338	'lemented for ocean = .FALSE.'
2339	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2340	ELSE
2341	dopr_index(i) = 65
2342	dopr_unit(i) = 'psu m/s'
2343	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2344	ENDIF
2345
2346	CASE ( 'wsa' )
2347	IF ( .NOT. ocean ) THEN
2348	message_string = 'data_output_pr = ' // &
2349	TRIM( data_output_pr(i) ) // ' is not imp' // &
2350	'lemented for ocean = .FALSE.'
2351	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2352	ELSE
2353	dopr_index(i) = 66
2354	dopr_unit(i) = 'psu m/s'
2355	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2356	ENDIF
2357
2358	CASE ( 'wsa' )
2359	IF ( .NOT. ocean ) THEN
2360	message_string = 'data_output_pr = ' // &
2361	TRIM( data_output_pr(i) ) // ' is not imp' // &
2362	'lemented for ocean = .FALSE.'
2363	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2364	ELSE
2365	dopr_index(i) = 67
2366	dopr_unit(i) = 'psu m/s'
2367	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2368	ENDIF
2369
2370	CASE ( 'wp' )
2371	dopr_index(i) = 68
2372	dopr_unit(i) = 'm3/s3'
2373	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2374
2375	CASE ( 'w"e' )
2376	dopr_index(i) = 69
2377	dopr_unit(i) = 'm3/s3'
2378	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2379
2380	CASE ( 'q*2' )
2381	IF ( .NOT. humidity ) THEN
2382	message_string = 'data_output_pr = ' // &
2383	TRIM( data_output_pr(i) ) // ' is not imp' // &
2384	'lemented for humidity = .FALSE.'
2385	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2386	ELSE
2387	dopr_index(i) = 70
2388	dopr_unit(i) = 'kg2/kg2'
2389	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2390	ENDIF
2391
2392	CASE ( 'prho' )
2393	IF ( .NOT. ocean ) THEN
2394	message_string = 'data_output_pr = ' // &
2395	TRIM( data_output_pr(i) ) // ' is not imp' // &
2396	'lemented for ocean = .FALSE.'
2397	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2398	ELSE
2399	dopr_index(i) = 71
2400	dopr_unit(i) = 'kg/m3'
2401	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2402	ENDIF
2403
2404	CASE ( 'hyp' )
2405	dopr_index(i) = 72
2406	dopr_unit(i) = 'dbar'
2407	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2408
2409	CASE DEFAULT
2410
2411	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2412
2413	IF ( unit == 'illegal' ) THEN
2414	IF ( data_output_pr_user(1) /= ' ' ) THEN
2415	message_string = 'illegal value for data_output_pr or ' // &
2416	'data_output_pr_user = "' // &
2417	TRIM( data_output_pr(i) ) // '"'
2418	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2419	ELSE
2420	message_string = 'illegal value for data_output_pr = "' // &
2421	TRIM( data_output_pr(i) ) // '"'
2422	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2423	ENDIF
2424	ENDIF
2425
2426	END SELECT
2427
2428	!
2429	!-- Check to which of the predefined coordinate systems the profile belongs
2430	DO k = 1, crmax
2431	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2432	/=0 ) &
2433	THEN
2434	dopr_crossindex(i) = k
2435	EXIT
2436	ENDIF
2437	ENDDO
2438	!
2439	!-- Generate the text for the labels of the PROFIL output file. "-characters
2440	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2441	!-- control characters
2442	dopr_label(i) = data_output_pr(i)
2443	position = INDEX( dopr_label(i) , '"' )
2444	DO WHILE ( position /= 0 )
2445	dopr_label(i)(position:position) = ''''
2446	position = INDEX( dopr_label(i) , '"' )
2447	ENDDO
2448
2449	ENDDO
2450
2451	!
2452	!-- y-value range of the coordinate system (PROFIL).
2453	!-- x-value range determined in plot_1d.
2454	IF ( .NOT. ocean ) THEN
2455	cross_uymin = 0.0
2456	IF ( z_max_do1d == -1.0 ) THEN
2457	cross_uymax = zu(nzt+1)
2458	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2459	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2460	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2461	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2462	ELSE
2463	cross_uymax = z_max_do1d
2464	ENDIF
2465	ENDIF
2466
2467	!
2468	!-- Check whether the chosen normalizing factor for the coordinate systems is
2469	!-- permissible
2470	DO i = 1, crmax
2471	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2472
2473	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2474	j = 0
2475
2476	CASE DEFAULT
2477	message_string = 'unknown normalization method cross_normali' // &
2478	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2479	'"'
2480	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2481
2482	END SELECT
2483	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2484
2485	CASE ( '', 'z_i' )
2486	j = 0
2487
2488	CASE DEFAULT
2489	message_string = 'unknown normalization method cross_normali' // &
2490	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2491	'"'
2492	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2493
2494	END SELECT
2495	ENDDO
2496	!
2497	!-- Check normalized y-value range of the coordinate system (PROFIL)
2498	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2499	THEN
2500	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2501	z_max_do1d_normalized, ' must be >= 0.0'
2502	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2503	ENDIF
2504
2505
2506	!
2507	!-- Append user-defined data output variables to the standard data output
2508	IF ( data_output_user(1) /= ' ' ) THEN
2509	i = 1
2510	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2511	i = i + 1
2512	ENDDO
2513	j = 1
2514	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2515	IF ( i > 100 ) THEN
2516	message_string = 'number of output quantitities given by data' // &
2517	'_output and data_output_user exceeds the limit of 100'
2518	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2519	ENDIF
2520	data_output(i) = data_output_user(j)
2521	i = i + 1
2522	j = j + 1
2523	ENDDO
2524	ENDIF
2525
2526	!
2527	!-- Check and set steering parameters for 2d/3d data output and averaging
2528	i = 1
2529	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2530	!
2531	!-- Check for data averaging
2532	ilen = LEN_TRIM( data_output(i) )
2533	j = 0 ! no data averaging
2534	IF ( ilen > 3 ) THEN
2535	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2536	j = 1 ! data averaging
2537	data_output(i) = data_output(i)(1:ilen-3)
2538	ENDIF
2539	ENDIF
2540	!
2541	!-- Check for cross section or volume data
2542	ilen = LEN_TRIM( data_output(i) )
2543	k = 0 ! 3d data
2544	var = data_output(i)(1:ilen)
2545	IF ( ilen > 3 ) THEN
2546	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2547	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2548	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2549	k = 1 ! 2d data
2550	var = data_output(i)(1:ilen-3)
2551	ENDIF
2552	ENDIF
2553	!
2554	!-- Check for allowed value and set units
2555	SELECT CASE ( TRIM( var ) )
2556
2557	CASE ( 'e' )
2558	IF ( constant_diffusion ) THEN
2559	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2560	'res constant_diffusion = .FALSE.'
2561	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2562	ENDIF
2563	unit = 'm2/s2'
2564
2565	CASE ( 'lpt' )
2566	IF ( .NOT. cloud_physics ) THEN
2567	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2568	'res cloud_physics = .TRUE.'
2569	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2570	ENDIF
2571	unit = 'K'
2572
2573	CASE ( 'pc', 'pr' )
2574	IF ( .NOT. particle_advection ) THEN
2575	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2576	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2577	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2578	ENDIF
2579	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2580	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2581
2582	CASE ( 'q', 'vpt' )
2583	IF ( .NOT. humidity ) THEN
2584	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2585	'res humidity = .TRUE.'
2586	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2587	ENDIF
2588	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2589	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2590
2591	CASE ( 'ql' )
2592	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2593	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2594	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2595	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2596	ENDIF
2597	unit = 'kg/kg'
2598
2599	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2600	IF ( .NOT. cloud_droplets ) THEN
2601	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2602	'res cloud_droplets = .TRUE.'
2603	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2604	ENDIF
2605	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2606	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2607	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2608
2609	CASE ( 'qv' )
2610	IF ( .NOT. cloud_physics ) THEN
2611	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2612	'res cloud_physics = .TRUE.'
2613	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2614	ENDIF
2615	unit = 'kg/kg'
2616
2617	CASE ( 'rho' )
2618	IF ( .NOT. ocean ) THEN
2619	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2620	'res ocean = .TRUE.'
2621	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2622	ENDIF
2623	unit = 'kg/m3'
2624
2625	CASE ( 's' )
2626	IF ( .NOT. passive_scalar ) THEN
2627	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2628	'res passive_scalar = .TRUE.'
2629	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2630	ENDIF
2631	unit = 'conc'
2632
2633	CASE ( 'sa' )
2634	IF ( .NOT. ocean ) THEN
2635	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2636	'res ocean = .TRUE.'
2637	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2638	ENDIF
2639	unit = 'psu'
2640
2641	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2642	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2643	message_string = 'illegal value for data_output: "' // &
2644	TRIM( var ) // '" & only 2d-horizontal ' // &
2645	'cross sections are allowed for this value'
2646	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2647	ENDIF
2648	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2649	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2650	'res cloud_physics = .TRUE.'
2651	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2652	ENDIF
2653	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2654	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2655	'res precipitation = .TRUE.'
2656	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2657	ENDIF
2658	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2659	message_string = 'temporal averaging of precipitation ' // &
2660	'amount "' // TRIM( var ) // '" is not possible'
2661	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2662	ENDIF
2663	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2664	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2665	'res precipitation = .TRUE.'
2666	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2667	ENDIF
2668	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2669	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2670	'res humidity = .TRUE.'
2671	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2672	ENDIF
2673
2674	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2675	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2676	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2677	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2678	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2679	IF ( TRIM( var ) == 't*' ) unit = 'K'
2680	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2681	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2682
2683
2684	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2685	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2686	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2687	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2688	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2689	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2690	CONTINUE
2691
2692	CASE DEFAULT
2693	CALL user_check_data_output( var, unit )
2694
2695	IF ( unit == 'illegal' ) THEN
2696	IF ( data_output_user(1) /= ' ' ) THEN
2697	message_string = 'illegal value for data_output or ' // &
2698	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2699	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2700	ELSE
2701	message_string = 'illegal value for data_output =' // &
2702	TRIM( data_output(i) ) // '"'
2703	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2704	ENDIF
2705	ENDIF
2706
2707	END SELECT
2708	!
2709	!-- Set the internal steering parameters appropriately
2710	IF ( k == 0 ) THEN
2711	do3d_no(j) = do3d_no(j) + 1
2712	do3d(j,do3d_no(j)) = data_output(i)
2713	do3d_unit(j,do3d_no(j)) = unit
2714	ELSE
2715	do2d_no(j) = do2d_no(j) + 1
2716	do2d(j,do2d_no(j)) = data_output(i)
2717	do2d_unit(j,do2d_no(j)) = unit
2718	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2719	data_output_xy(j) = .TRUE.
2720	ENDIF
2721	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2722	data_output_xz(j) = .TRUE.
2723	ENDIF
2724	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2725	data_output_yz(j) = .TRUE.
2726	ENDIF
2727	ENDIF
2728
2729	IF ( j == 1 ) THEN
2730	!
2731	!-- Check, if variable is already subject to averaging
2732	found = .FALSE.
2733	DO k = 1, doav_n
2734	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2735	ENDDO
2736
2737	IF ( .NOT. found ) THEN
2738	doav_n = doav_n + 1
2739	doav(doav_n) = var
2740	ENDIF
2741	ENDIF
2742
2743	i = i + 1
2744	ENDDO
2745
2746	!
2747	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2748	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2749	WRITE( message_string, * ) 'output of averaged quantity "', &
2750	TRIM( doav(1) ), '_av" requires to set a ', &
2751	'non-zero & averaging interval'
2752	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2753	ENDIF
2754
2755	!
2756	!-- Check sectional planes and store them in one shared array
2757	IF ( ANY( section_xy > nz + 1 ) ) THEN
2758	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2759	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2760	ENDIF
2761	IF ( ANY( section_xz > ny + 1 ) ) THEN
2762	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2763	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2764	ENDIF
2765	IF ( ANY( section_yz > nx + 1 ) ) THEN
2766	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2767	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2768	ENDIF
2769	section(:,1) = section_xy
2770	section(:,2) = section_xz
2771	section(:,3) = section_yz
2772
2773	!
2774	!-- Upper plot limit (grid point value) for 1D profiles
2775	IF ( z_max_do1d == -1.0 ) THEN
2776
2777	nz_do1d = nzt+1
2778
2779	ELSE
2780	DO k = nzb+1, nzt+1
2781	nz_do1d = k
2782	IF ( zw(k) > z_max_do1d ) EXIT
2783	ENDDO
2784	ENDIF
2785
2786	!
2787	!-- Upper plot limit for 2D vertical sections
2788	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2789	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2790	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2791	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2792	' (zu(nzt))'
2793	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2794	ENDIF
2795
2796	!
2797	!-- Upper plot limit for 3D arrays
2798	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2799
2800	!
2801	!-- Determine and check accuracy for compressed 3D plot output
2802	IF ( do3d_compress ) THEN
2803	!
2804	!-- Compression only permissible on T3E machines
2805	IF ( host(1:3) /= 't3e' ) THEN
2806	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2807	TRIM( host ) // '"'
2808	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2809	ENDIF
2810
2811	i = 1
2812	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2813
2814	ilen = LEN_TRIM( do3d_comp_prec(i) )
2815	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2816	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2817	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2818	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2819	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2820	ENDIF
2821
2822	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2823	var = do3d_comp_prec(i)(1:ilen-1)
2824
2825	SELECT CASE ( var )
2826
2827	CASE ( 'u' )
2828	j = 1
2829	CASE ( 'v' )
2830	j = 2
2831	CASE ( 'w' )
2832	j = 3
2833	CASE ( 'p' )
2834	j = 4
2835	CASE ( 'pt' )
2836	j = 5
2837
2838	CASE DEFAULT
2839	WRITE( message_string, * ) 'unknown variable "', &
2840	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2841	i, ')'
2842	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2843
2844	END SELECT
2845
2846	plot_3d_precision(j)%precision = prec
2847	i = i + 1
2848
2849	ENDDO
2850	ENDIF
2851
2852	!
2853	!-- Check the data output format(s)
2854	IF ( data_output_format(1) == ' ' ) THEN
2855	!
2856	!-- Default value
2857	netcdf_output = .TRUE.
2858	ELSE
2859	i = 1
2860	DO WHILE ( data_output_format(i) /= ' ' )
2861
2862	SELECT CASE ( data_output_format(i) )
2863
2864	CASE ( 'netcdf' )
2865	netcdf_output = .TRUE.
2866	CASE ( 'iso2d' )
2867	iso2d_output = .TRUE.
2868	CASE ( 'profil' )
2869	profil_output = .TRUE.
2870	CASE ( 'avs' )
2871	avs_output = .TRUE.
2872
2873	CASE DEFAULT
2874	message_string = 'unknown value for data_output_format "' // &
2875	TRIM( data_output_format(i) ) // '"'
2876	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2877
2878	END SELECT
2879
2880	i = i + 1
2881	IF ( i > 10 ) EXIT
2882
2883	ENDDO
2884
2885	ENDIF
2886
2887	!
2888	!-- Check mask conditions
2889	DO mid = 1, max_masks
2890	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2891	data_output_masks_user(mid,1) /= ' ' ) THEN
2892	masks = masks + 1
2893	ENDIF
2894	ENDDO
2895
2896	IF ( masks < 0 .OR. masks > max_masks ) THEN
2897	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2898	'<= ', max_masks, ' (=max_masks)'
2899	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2900	ENDIF
2901	IF ( masks > 0 ) THEN
2902	mask_scale(1) = mask_scale_x
2903	mask_scale(2) = mask_scale_y
2904	mask_scale(3) = mask_scale_z
2905	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2906	WRITE( message_string, * ) &
2907	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2908	'must be > 0.0'
2909	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2910	ENDIF
2911	!
2912	!-- Generate masks for masked data output
2913	CALL init_masks
2914	ENDIF
2915
2916	!
2917	!-- Check the NetCDF data format
2918	IF ( netcdf_data_format > 2 ) THEN
2919	#if defined( __netcdf4 )
2920	CONTINUE
2921	#else
2922	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2923	'cpp-directive __netcdf4 given & switch ' // &
2924	'back to 64-bit offset format'
2925	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2926	netcdf_data_format = 2
2927	#endif
2928	ENDIF
2929
2930	!
2931
2932	!-- Check netcdf precison
2933	ldum = .FALSE.
2934	CALL define_netcdf_header( 'ch', ldum, 0 )
2935
2936	!
2937	!-- Check, whether a constant diffusion coefficient shall be used
2938	IF ( km_constant /= -1.0 ) THEN
2939	IF ( km_constant < 0.0 ) THEN
2940	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2941	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2942	ELSE
2943	IF ( prandtl_number < 0.0 ) THEN
2944	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2945	' < 0.0'
2946	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2947	ENDIF
2948	constant_diffusion = .TRUE.
2949
2950	IF ( prandtl_layer ) THEN
2951	message_string = 'prandtl_layer is not allowed with fixed ' // &
2952	'value of km'
2953	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2954	ENDIF
2955	ENDIF
2956	ENDIF
2957
2958	!
2959	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2960	!-- for the horizontal diffusivity used within the outflow damping layer,
2961	!-- and check/set the width of the damping layer
2962	IF ( bc_lr /= 'cyclic' ) THEN
2963	IF ( km_damp_max == -1.0 ) THEN
2964	km_damp_max = 0.5 * dx
2965	ENDIF
2966	IF ( outflow_damping_width == -1.0 ) THEN
2967	outflow_damping_width = MIN( 20, nx/2 )
2968	ENDIF
2969	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2970	message_string = 'outflow_damping width out of range'
2971	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2972	ENDIF
2973	ENDIF
2974
2975	IF ( bc_ns /= 'cyclic' ) THEN
2976	IF ( km_damp_max == -1.0 ) THEN
2977	km_damp_max = 0.5 * dy
2978	ENDIF
2979	IF ( outflow_damping_width == -1.0 ) THEN
2980	outflow_damping_width = MIN( 20, ny/2 )
2981	ENDIF
2982	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2983	message_string = 'outflow_damping width out of range'
2984	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2985	ENDIF
2986	ENDIF
2987
2988	!
2989	!-- Check value range for rif
2990	IF ( rif_min >= rif_max ) THEN
2991	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2992	'than rif_max = ', rif_max
2993	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2994	ENDIF
2995
2996	!
2997	!-- Determine upper and lower hight level indices for random perturbations
2998	IF ( disturbance_level_b == -9999999.9 ) THEN
2999	IF ( ocean ) THEN
3000	disturbance_level_b = zu((nzt*2)/3)
3001	disturbance_level_ind_b = ( nzt * 2 ) / 3
3002	ELSE
3003	disturbance_level_b = zu(nzb+3)
3004	disturbance_level_ind_b = nzb + 3
3005	ENDIF
3006	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3007	WRITE( message_string, * ) 'disturbance_level_b = ', &
3008	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3009	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3010	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3011	WRITE( message_string, * ) 'disturbance_level_b = ', &
3012	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3013	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3014	ELSE
3015	DO k = 3, nzt-2
3016	IF ( disturbance_level_b <= zu(k) ) THEN
3017	disturbance_level_ind_b = k
3018	EXIT
3019	ENDIF
3020	ENDDO
3021	ENDIF
3022
3023	IF ( disturbance_level_t == -9999999.9 ) THEN
3024	IF ( ocean ) THEN
3025	disturbance_level_t = zu(nzt-3)
3026	disturbance_level_ind_t = nzt - 3
3027	ELSE
3028	disturbance_level_t = zu(nzt/3)
3029	disturbance_level_ind_t = nzt / 3
3030	ENDIF
3031	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3032	WRITE( message_string, * ) 'disturbance_level_t = ', &
3033	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3034	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3035	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3036	WRITE( message_string, * ) 'disturbance_level_t = ', &
3037	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3038	disturbance_level_b
3039	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3040	ELSE
3041	DO k = 3, nzt-2
3042	IF ( disturbance_level_t <= zu(k) ) THEN
3043	disturbance_level_ind_t = k
3044	EXIT
3045	ENDIF
3046	ENDDO
3047	ENDIF
3048
3049	!
3050	!-- Check again whether the levels determined this way are ok.
3051	!-- Error may occur at automatic determination and too few grid points in
3052	!-- z-direction.
3053	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3054	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3055	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3056	disturbance_level_b
3057	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3058	ENDIF
3059
3060	!
3061	!-- Determine the horizontal index range for random perturbations.
3062	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3063	!-- near the inflow and the perturbation area is further limited to ...(1)
3064	!-- after the initial phase of the flow.
3065	dist_nxl = 0; dist_nxr = nx
3066	dist_nys = 0; dist_nyn = ny
3067	IF ( bc_lr /= 'cyclic' ) THEN
3068	IF ( inflow_disturbance_begin == -1 ) THEN
3069	inflow_disturbance_begin = MIN( 10, nx/2 )
3070	ENDIF
3071	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3072	THEN
3073	message_string = 'inflow_disturbance_begin out of range'
3074	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3075	ENDIF
3076	IF ( inflow_disturbance_end == -1 ) THEN
3077	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3078	ENDIF
3079	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3080	THEN
3081	message_string = 'inflow_disturbance_end out of range'
3082	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3083	ENDIF
3084	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3085	IF ( inflow_disturbance_begin == -1 ) THEN
3086	inflow_disturbance_begin = MIN( 10, ny/2 )
3087	ENDIF
3088	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3089	THEN
3090	message_string = 'inflow_disturbance_begin out of range'
3091	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3092	ENDIF
3093	IF ( inflow_disturbance_end == -1 ) THEN
3094	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3095	ENDIF
3096	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3097	THEN
3098	message_string = 'inflow_disturbance_end out of range'
3099	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3100	ENDIF
3101	ENDIF
3102
3103	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3104	dist_nxr = nx - inflow_disturbance_begin
3105	dist_nxl(1) = nx - inflow_disturbance_end
3106	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3107	dist_nxl = inflow_disturbance_begin
3108	dist_nxr(1) = inflow_disturbance_end
3109	ENDIF
3110	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3111	dist_nyn = ny - inflow_disturbance_begin
3112	dist_nys(1) = ny - inflow_disturbance_end
3113	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3114	dist_nys = inflow_disturbance_begin
3115	dist_nyn(1) = inflow_disturbance_end
3116	ENDIF
3117
3118	!
3119	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3120	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3121	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3122	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3123	'condition at the inflow boundary'
3124	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3125	ENDIF
3126
3127	!
3128	!-- In case of turbulent inflow calculate the index of the recycling plane
3129	IF ( turbulent_inflow ) THEN
3130	IF ( recycling_width == 9999999.9 ) THEN
3131	!
3132	!-- Set the default value for the width of the recycling domain
3133	recycling_width = 0.1 * nx * dx
3134	ELSE
3135	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3136	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3137	' ', recycling_width
3138	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3139	ENDIF
3140	ENDIF
3141	!
3142	!-- Calculate the index
3143	recycling_plane = recycling_width / dx
3144	ENDIF
3145
3146	!
3147	!-- Check random generator
3148	IF ( random_generator /= 'system-specific' .AND. &
3149	random_generator /= 'numerical-recipes' ) THEN
3150	message_string = 'unknown random generator: random_generator = "' // &
3151	TRIM( random_generator ) // '"'
3152	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3153	ENDIF
3154
3155	!
3156	!-- Determine damping level index for 1D model
3157	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3158	IF ( damp_level_1d == -1.0 ) THEN
3159	damp_level_1d = zu(nzt+1)
3160	damp_level_ind_1d = nzt + 1
3161	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3162	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3163	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3164	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3165	ELSE
3166	DO k = 1, nzt+1
3167	IF ( damp_level_1d <= zu(k) ) THEN
3168	damp_level_ind_1d = k
3169	EXIT
3170	ENDIF
3171	ENDDO
3172	ENDIF
3173	ENDIF
3174
3175	!
3176	!-- Check some other 1d-model parameters
3177	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3178	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3179	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3180	'" is unknown'
3181	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3182	ENDIF
3183	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3184	TRIM( dissipation_1d ) /= 'detering' ) THEN
3185	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3186	'" is unknown'
3187	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3188	ENDIF
3189
3190	!
3191	!-- Set time for the next user defined restart (time_restart is the
3192	!-- internal parameter for steering restart events)
3193	IF ( restart_time /= 9999999.9 ) THEN
3194	IF ( restart_time > time_since_reference_point ) THEN
3195	time_restart = restart_time
3196	ENDIF
3197	ELSE
3198	!
3199	!-- In case of a restart run, set internal parameter to default (no restart)
3200	!-- if the NAMELIST-parameter restart_time is omitted
3201	time_restart = 9999999.9
3202	ENDIF
3203
3204	!
3205	!-- Set default value of the time needed to terminate a model run
3206	IF ( termination_time_needed == -1.0 ) THEN
3207	IF ( host(1:3) == 'ibm' ) THEN
3208	termination_time_needed = 300.0
3209	ELSE
3210	termination_time_needed = 35.0
3211	ENDIF
3212	ENDIF
3213
3214	!
3215	!-- Check the time needed to terminate a model run
3216	IF ( host(1:3) == 't3e' ) THEN
3217	!
3218	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3219	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3220	IF ( termination_time_needed <= 30.0 ) THEN
3221	WRITE( message_string, * ) 'termination_time_needed = ', &
3222	termination_time_needed, ' must be > 30.0 on host "', &
3223	TRIM( host ), '"'
3224	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3225	ENDIF
3226	ELSEIF ( host(1:3) == 'ibm' ) THEN
3227	!
3228	!-- On IBM-regatta machines the time should be at least 300 seconds,
3229	!-- because the job time consumed before executing palm (for compiling,
3230	!-- copying of files, etc.) has to be regarded
3231	IF ( termination_time_needed < 300.0 ) THEN
3232	WRITE( message_string, * ) 'termination_time_needed = ', &
3233	termination_time_needed, ' should be >= 300.0 on host "', &
3234	TRIM( host ), '"'
3235	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3236	ENDIF
3237	ENDIF
3238
3239	!
3240	!-- Check pressure gradient conditions
3241	IF ( dp_external .AND. conserve_volume_flow ) THEN
3242	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3243	'w are .TRUE. but one of them must be .FALSE.'
3244	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3245	ENDIF
3246	IF ( dp_external ) THEN
3247	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3248	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3249	' of range'
3250	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3251	ENDIF
3252	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3253	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3254	'ro, i.e. the external pressure gradient & will not be applied'
3255	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3256	ENDIF
3257	ENDIF
3258	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3259	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3260	'.FALSE., i.e. the external pressure gradient & will not be applied'
3261	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3262	ENDIF
3263	IF ( conserve_volume_flow ) THEN
3264	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3265
3266	conserve_volume_flow_mode = 'initial_profiles'
3267
3268	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3269	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3270	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3271	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3272	conserve_volume_flow_mode
3273	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3274	ENDIF
3275	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3276	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3277	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3278	'require conserve_volume_flow_mode = ''initial_profiles'''
3279	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3280	ENDIF
3281	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3282	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3283	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3284	'require conserve_volume_flow_mode = ''initial_profiles''', &
3285	' or ''bulk_velocity'''
3286	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3287	ENDIF
3288	ENDIF
3289	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3290	( .NOT. conserve_volume_flow .OR. &
3291	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3292	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3293	'conserve_volume_flow = .T. and ', &
3294	'conserve_volume_flow_mode = ''bulk_velocity'''
3295	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3296	ENDIF
3297
3298	!
3299	!-- Check particle attributes
3300	IF ( particle_color /= 'none' ) THEN
3301	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3302	particle_color /= 'z' ) THEN
3303	message_string = 'illegal value for parameter particle_color: ' // &
3304	TRIM( particle_color)
3305	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3306	ELSE
3307	IF ( color_interval(2) <= color_interval(1) ) THEN
3308	message_string = 'color_interval(2) <= color_interval(1)'
3309	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3310	ENDIF
3311	ENDIF
3312	ENDIF
3313
3314	IF ( particle_dvrpsize /= 'none' ) THEN
3315	IF ( particle_dvrpsize /= 'absw' ) THEN
3316	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3317	' ' // TRIM( particle_color)
3318	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3319	ELSE
3320	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3321	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3322	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3323	ENDIF
3324	ENDIF
3325	ENDIF
3326
3327	!
3328	!-- Check &userpar parameters
3329	CALL user_check_parameters
3330
3331
3332
3333	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |