Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 74

Last change on this file since 74 was 73, checked in by raasch, 18 years ago
preliminary changes for radiation conditions
Property svn:keywords set to `Id`
File size: 86.4 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[51]	6	! "by_user" allowed as initializing action, -data_output_ts,
[63]	7	! leapfrog with non-flat topography not allowed any more, loop_optimization
[72]	8	! and pt_reference are checked,
	9	! output of precipitation amount/rate and roughnes length + check
[73]	10	! possible negative humidities are avoided in initial profile,
	11	! dirichlet/neumann changed to dirichlet/radiation, etc.
[1]	12	!
	13	! Former revisions:
	14	! -----------------
[3]	15	! $Id: check_parameters.f90 73 2007-03-20 08:33:14Z raasch $
[39]	16	!
	17	! 20 2007-02-26 00:12:32Z raasch
	18	! Temperature and humidity gradients at top are now calculated for nzt+1,
	19	! top_heatflux and respective boundary condition bc_pt_t is checked
	20	!
[3]	21	! RCS Log replace by Id keyword, revision history cleaned up
	22	!
[1]	23	! Revision 1.61 2006/08/04 14:20:25 raasch
	24	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	25	! use_upstream_for_tke, default value for dt_dopts,
	26	! generation of file header moved from routines palm and header to here
	27	!
	28	! Revision 1.1 1997/08/26 06:29:23 raasch
	29	! Initial revision
	30	!
	31	!
	32	! Description:
	33	! ------------
	34	! Check control parameters and deduce further quantities.
	35	!------------------------------------------------------------------------------!
	36
	37	USE arrays_3d
	38	USE constants
	39	USE control_parameters
	40	USE grid_variables
	41	USE indices
	42	USE model_1d
	43	USE netcdf_control
	44	USE particle_attributes
	45	USE pegrid
	46	USE profil_parameter
	47	USE statistics
	48	USE transpose_indices
	49
	50	IMPLICIT NONE
	51
	52	CHARACTER (LEN=1) :: sq
	53	CHARACTER (LEN=6) :: var
	54	CHARACTER (LEN=7) :: unit
	55	CHARACTER (LEN=8) :: date
	56	CHARACTER (LEN=10) :: time
	57	CHARACTER (LEN=100) :: action
	58
	59	INTEGER :: i, ilen, intervals, iter, j, k, nnxh, nnyh, position, prec
	60	LOGICAL :: found, ldum
	61	REAL :: gradient, maxn, maxp
	62
	63
	64	!
	65	!-- Warning, if host is not set
	66	IF ( host(1:1) == ' ' ) THEN
	67	IF ( myid == 0 ) THEN
	68	PRINT*, '+++ WARNING: check_parameters:'
	69	PRINT*, ' "host" is not set. Please check that environment', &
	70	' variable "localhost"'
	71	PRINT*, ' is set before running PALM'
	72	ENDIF
	73	ENDIF
	74
	75	!
	76	!-- Generate the file header which is used as a header for most of PALM's
	77	!-- output files
	78	CALL DATE_AND_TIME( date, time )
	79	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	80	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
	81
	82	WRITE ( run_description_header, '(A,2X,A,A,A,I2.2,2X,A,A,2X,A,1X,A)' ) &
	83	TRIM( version ),'run: ', TRIM( run_identifier ), '.', &
	84	runnr, 'host: ', TRIM( host ), run_date, run_time
	85
	86	!
[63]	87	!-- Check the general loop optimization method
	88	IF ( loop_optimization == 'default' ) THEN
	89	IF ( host(1:3) == 'nec' ) THEN
	90	loop_optimization = 'vector'
	91	ELSE
	92	loop_optimization = 'cache'
	93	ENDIF
	94	ENDIF
	95	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	96	.AND. loop_optimization /= 'vector' ) THEN
	97	IF ( myid == 0 ) THEN
	98	PRINT*, '+++ check_parameters:'
	99	PRINT*, ' illegal value given for loop_optimization: ', &
	100	TRIM( loop_optimization )
	101	ENDIF
	102	CALL local_stop
	103	ENDIF
	104
	105	!
[1]	106	!-- Check topography setting (check for illegal parameter combinations)
	107	IF ( topography /= 'flat' ) THEN
	108	action = ' '
	109	IF ( scalar_advec /= 'pw-scheme' ) THEN
	110	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	111	ENDIF
	112	IF ( momentum_advec /= 'pw-scheme' ) THEN
	113	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	114	ENDIF
[51]	115	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	116	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	117	ENDIF
[1]	118	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
	119	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	120	ENDIF
	121	IF ( sloping_surface ) THEN
	122	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	123	ENDIF
	124	IF ( galilei_transformation ) THEN
	125	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	126	ENDIF
	127	IF ( cloud_physics ) THEN
	128	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	129	ENDIF
	130	IF ( cloud_droplets ) THEN
	131	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	132	ENDIF
	133	IF ( moisture ) THEN
	134	WRITE( action, '(A)' ) 'moisture = .TRUE.'
	135	ENDIF
	136	IF ( .NOT. prandtl_layer ) THEN
	137	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	138	ENDIF
	139	IF ( action /= ' ' ) THEN
	140	IF ( myid == 0 ) THEN
	141	PRINT*, '+++ check_parameters:'
	142	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
	143	ENDIF
	144	CALL local_stop
	145	ENDIF
	146	ENDIF
	147	!
	148	!-- Check whether there are any illegal values
	149	!-- Pressure solver:
	150	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	151	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
	152	IF ( myid == 0 ) THEN
	153	PRINT*, '+++ check_parameters:'
	154	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
	155	psolver
	156	ENDIF
	157	CALL local_stop
	158	ENDIF
	159
	160	#if defined( __parallel )
	161	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
	162	IF ( myid == 0 ) THEN
	163	PRINT*, '+++ check_parameters:'
	164	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	165	'1d domain-decomposition along x'
	166	PRINT*, ' please do not set npey/=1 in the parameter file'
	167	ENDIF
	168	CALL local_stop
	169	ENDIF
	170	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
	171	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
	172	IF ( myid == 0 ) THEN
	173	PRINT*, '+++ check_parameters:'
	174	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
	175	'subdomains with unequal size'
	176	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
	177	' file'
	178	ENDIF
	179	CALL local_stop
	180	ENDIF
	181	#else
	182	IF ( psolver == 'poisfft_hybrid' ) THEN
	183	IF ( myid == 0 ) THEN
	184	PRINT*, '+++ check_parameters:'
	185	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	186	'parallel environment'
	187	ENDIF
	188	CALL local_stop
	189	ENDIF
	190	#endif
	191
	192	IF ( psolver == 'multigrid' ) THEN
	193	IF ( cycle_mg == 'w' ) THEN
	194	gamma_mg = 2
	195	ELSEIF ( cycle_mg == 'v' ) THEN
	196	gamma_mg = 1
	197	ELSE
	198	IF ( myid == 0 ) THEN
	199	PRINT*, '+++ check_parameters:'
	200	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
	201	ENDIF
	202	CALL local_stop
	203	ENDIF
	204	ENDIF
	205
	206	IF ( fft_method /= 'singleton-algorithm' .AND. &
	207	fft_method /= 'temperton-algorithm' .AND. &
	208	fft_method /= 'system-specific' ) THEN
	209	IF ( myid == 0 ) THEN
	210	PRINT*, '+++ check_parameters:'
	211	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
	212	ENDIF
	213	CALL local_stop
	214	ENDIF
	215
	216	!
	217	!-- Advection schemes:
	218	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	219	THEN
	220	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	221	'scheme: momentum_advec=', momentum_advec
	222	CALL local_stop
	223	ENDIF
	224	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	225	.AND. timestep_scheme /= 'euler' ) THEN
	226	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
	227	momentum_advec, ' is not allowed with ', &
	228	'timestep_scheme=', timestep_scheme
	229	CALL local_stop
	230	ENDIF
	231
	232	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	233	scalar_advec /= 'ups-scheme' ) THEN
	234	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	235	'scheme: scalar_advec=', scalar_advec
	236	CALL local_stop
	237	ENDIF
	238
	239	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	240	use_upstream_for_tke = .TRUE.
	241	IF ( myid == 0 ) THEN
	242	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
	243	'.TRUE. because use_sgs_for_particles = .TRUE.'
	244	ENDIF
	245	ENDIF
	246
	247	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
	248	IF ( myid == 0 ) THEN
	249	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
	250	'not allowed with timestep_scheme=', timestep_scheme
	251	ENDIF
	252	CALL local_stop
	253	ENDIF
	254
	255	!
	256	!-- Timestep schemes:
	257	SELECT CASE ( TRIM( timestep_scheme ) )
	258
	259	CASE ( 'euler' )
	260	intermediate_timestep_count_max = 1
	261	asselin_filter_factor = 0.0
	262
	263	CASE ( 'leapfrog', 'leapfrog+euler' )
	264	intermediate_timestep_count_max = 1
	265
	266	CASE ( 'runge-kutta-2' )
	267	intermediate_timestep_count_max = 2
	268	asselin_filter_factor = 0.0
	269
	270	CASE ( 'runge-kutta-3' )
	271	intermediate_timestep_count_max = 3
	272	asselin_filter_factor = 0.0
	273
	274	CASE DEFAULT
	275	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
	276	'scheme: timestep_scheme=', timestep_scheme
	277	CALL local_stop
	278
	279	END SELECT
	280
[63]	281	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	282	THEN
	283	IF ( myid == 0 ) THEN
	284	PRINT*, '+++ check_parameters: scalar advection scheme "', &
	285	TRIM( scalar_advec ), '"'
	286	PRINT*, ' does not work with timestep_scheme "', &
	287	TRIM( timestep_scheme ), '"'
	288	ENDIF
	289	CALL local_stop
	290	ENDIF
	291
	292	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	293	THEN
	294	IF ( myid == 0 ) THEN
	295	PRINT*, '+++ check_parameters: momentum advection scheme "', &
	296	TRIM( momentum_advec ), '"'
	297	PRINT*, ' does not work with timestep_scheme "', &
	298	TRIM( timestep_scheme ), '"'
	299	ENDIF
	300	CALL local_stop
	301	ENDIF
	302
	303
	304	IF ( initializing_actions == ' ' ) THEN
	305	IF ( myid == 0 ) THEN
	306	PRINT*, '+++ check parameters:'
	307	PRINT*, ' no value found for initializing_actions'
	308	ENDIF
	309	CALL local_stop
	310	ENDIF
	311
	312	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	313	!
	314	!-- No model continuation run; several initialising actions are possible
	315	action = initializing_actions
	316	DO WHILE ( TRIM( action ) /= '' )
	317	position = INDEX( action, ' ' )
	318	SELECT CASE ( action(1:position-1) )
	319
	320	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	321	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	322	action = action(position+1:)
	323
	324	CASE DEFAULT
	325	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
	326	'ng_action unkown or not allowed: action = "', &
	327	TRIM(action), '"'
	328	CALL local_stop
	329
	330	END SELECT
	331	ENDDO
	332	ENDIF
	333	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	334	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	335	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	336	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
	337	' allowed simultaneously'
	338	CALL local_stop
	339	ENDIF
[46]	340	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	341	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
	342	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	343	'"set_constant_profiles" and "by_user" are not', &
	344	' allowed simultaneously'
	345	CALL local_stop
	346	ENDIF
	347	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	348	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	349	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	350	'"by_user" and "set_1d-model_profiles" are not', &
	351	' allowed simultaneously'
	352	CALL local_stop
	353	ENDIF
[1]	354
	355	IF ( cloud_physics .AND. .NOT. moisture ) THEN
[72]	356	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
	357	cloud_physics, ' is not allowed with ', &
	358	'moisture =', moisture
[1]	359	CALL local_stop
	360	ENDIF
	361
[72]	362	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
	363	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
	364	precipitation, ' is not allowed with ', &
	365	'cloud_physics =', cloud_physics
	366	CALL local_stop
	367	ENDIF
	368
[1]	369	IF ( moisture .AND. sloping_surface ) THEN
	370	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE', &
	371	'and hang = TRUE are not', &
	372	' allowed simultaneously'
	373	CALL local_stop
	374	ENDIF
	375
	376	IF ( moisture .AND. scalar_advec == 'ups-scheme' ) THEN
	377	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
	378	'is not implemented for moisture'
	379	CALL local_stop
	380	ENDIF
	381
	382	IF ( passive_scalar .AND. moisture ) THEN
	383	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE and', &
	384	'passive_scalar = TRUE is not allowed ', &
	385	'simultaneously'
	386	CALL local_stop
	387	ENDIF
	388
	389	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
	390	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
	391	'is not implemented for passive_scalar'
	392	CALL local_stop
	393	ENDIF
	394
	395	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
	396	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
	397	TRIM( grid_matching ), &
	398	'" found for parameter grid_matching'
	399	CALL local_stop
	400	ENDIF
	401
	402	!
	403	!-- In case of no model continuation run, check initialising parameters and
	404	!-- deduce further quantities
	405	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	406
	407	!
	408	!-- Initial profiles for 1D and 3D model, respectively
	409	u_init = ug_surface
	410	v_init = vg_surface
	411	pt_init = pt_surface
	412	IF ( moisture ) q_init = q_surface
	413	IF ( passive_scalar ) q_init = s_surface
	414
	415	!
	416	!--
	417	!-- If required, compute initial profile of the geostrophic wind
	418	!-- (component ug)
	419	i = 1
	420	gradient = 0.0
	421	ug_vertical_gradient_level_ind(1) = 0
	422	ug(0) = ug_surface
	423	DO k = 1, nzt+1
	424	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	425	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	426	gradient = ug_vertical_gradient(i) / 100.0
	427	ug_vertical_gradient_level_ind(i) = k - 1
	428	i = i + 1
	429	IF ( i > 10 ) THEN
	430	IF ( myid == 0 ) THEN
	431	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	432	' "ug_vertical_gradient_level_ind" exceeded'
	433	ENDIF
	434	CALL local_stop
	435	ENDIF
	436	ENDIF
	437	IF ( gradient /= 0.0 ) THEN
	438	IF ( k /= 1 ) THEN
	439	ug(k) = ug(k-1) + dzu(k) * gradient
	440	ELSE
	441	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	442	ENDIF
	443	ELSE
	444	ug(k) = ug(k-1)
	445	ENDIF
	446	ENDDO
	447
	448	u_init = ug
	449
	450	!
	451	!-- In case of no given gradients for ug, choose a vanishing gradient
	452	IF ( ug_vertical_gradient_level(1) == -1.0 ) THEN
	453	ug_vertical_gradient_level(1) = 0.0
	454	ENDIF
	455
	456	!
	457	!--
	458	!-- If required, compute initial profile of the geostrophic wind
	459	!-- (component vg)
	460	i = 1
	461	gradient = 0.0
	462	vg_vertical_gradient_level_ind(1) = 0
	463	vg(0) = vg_surface
	464	DO k = 1, nzt+1
	465	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	466	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	467	gradient = vg_vertical_gradient(i) / 100.0
	468	vg_vertical_gradient_level_ind(i) = k - 1
	469	i = i + 1
	470	IF ( i > 10 ) THEN
	471	IF ( myid == 0 ) THEN
	472	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	473	' "vg_vertical_gradient_level_ind" exceeded'
	474	ENDIF
	475	CALL local_stop
	476	ENDIF
	477	ENDIF
	478	IF ( gradient /= 0.0 ) THEN
	479	IF ( k /= 1 ) THEN
	480	vg(k) = vg(k-1) + dzu(k) * gradient
	481	ELSE
	482	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	483	ENDIF
	484	ELSE
	485	vg(k) = vg(k-1)
	486	ENDIF
	487	ENDDO
	488
	489	v_init = vg
	490
	491	!
	492	!-- In case of no given gradients for vg, choose a vanishing gradient
	493	IF ( vg_vertical_gradient_level(1) == -1.0 ) THEN
	494	vg_vertical_gradient_level(1) = 0.0
	495	ENDIF
	496
	497	!
	498	!-- If required, compute initial temperature profile using the given
	499	!-- temperature gradient
	500	i = 1
	501	gradient = 0.0
	502	pt_vertical_gradient_level_ind(1) = 0
	503	DO k = 1, nzt+1
	504	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	505	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	506	gradient = pt_vertical_gradient(i) / 100.0
	507	pt_vertical_gradient_level_ind(i) = k - 1
	508	i = i + 1
	509	IF ( i > 10 ) THEN
	510	IF ( myid == 0 ) THEN
	511	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	512	' "pt_vertical_gradient_level_ind" exceeded'
	513	ENDIF
	514	CALL local_stop
	515	ENDIF
	516	ENDIF
	517	IF ( gradient /= 0.0 ) THEN
	518	IF ( k /= 1 ) THEN
	519	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	520	ELSE
	521	pt_init(k) = pt_init(k-1) + 0.5 * dzu(k) * gradient
	522	ENDIF
	523	ELSE
	524	pt_init(k) = pt_init(k-1)
	525	ENDIF
	526	ENDDO
	527
	528	!
	529	!-- In case of no given temperature gradients, choose gradient of neutral
	530	!-- stratification
	531	IF ( pt_vertical_gradient_level(1) == -1.0 ) THEN
	532	pt_vertical_gradient_level(1) = 0.0
	533	ENDIF
	534
	535	!
	536	!-- Store temperature gradient at the top boundary for possile Neumann
	537	!-- boundary condition
[19]	538	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	539
	540	!
	541	!-- If required, compute initial humidity or scalar profile using the given
	542	!-- humidity/scalar gradient. In case of scalar transport, initially store
	543	!-- values of the scalar parameters on humidity parameters
	544	IF ( passive_scalar ) THEN
	545	bc_q_b = bc_s_b
	546	bc_q_t = bc_s_t
	547	q_surface = s_surface
	548	q_surface_initial_change = s_surface_initial_change
	549	q_vertical_gradient = s_vertical_gradient
	550	q_vertical_gradient_level = s_vertical_gradient_level
	551	surface_waterflux = surface_scalarflux
	552	ENDIF
	553
	554	IF ( moisture .OR. passive_scalar ) THEN
	555
	556	i = 1
	557	gradient = 0.0
	558	q_vertical_gradient_level_ind(1) = 0
	559	DO k = 1, nzt+1
	560	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	561	q_vertical_gradient_level(i) >= 0.0 ) THEN
	562	gradient = q_vertical_gradient(i) / 100.0
	563	q_vertical_gradient_level_ind(i) = k - 1
	564	i = i + 1
	565	IF ( i > 10 ) THEN
	566	IF ( myid == 0 ) THEN
	567	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
	568	'ay "q_vertical_gradient_level_ind" exceeded'
	569	ENDIF
	570	CALL local_stop
	571	ENDIF
	572	ENDIF
	573	IF ( gradient /= 0.0 ) THEN
	574	IF ( k /= 1 ) THEN
	575	q_init(k) = q_init(k-1) + dzu(k) * gradient
	576	ELSE
	577	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	578	ENDIF
	579	ELSE
	580	q_init(k) = q_init(k-1)
	581	ENDIF
[72]	582	!
	583	!-- Avoid negative humidities
	584	IF ( q_init(k) < 0.0 ) THEN
	585	q_init(k) = 0.0
	586	ENDIF
[1]	587	ENDDO
	588
	589	!
	590	!-- In case of no given humidity gradients, choose zero gradient
	591	!-- conditions
	592	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	593	q_vertical_gradient_level(1) = 0.0
	594	ENDIF
	595
	596	!
	597	!-- Store humidity gradient at the top boundary for possile Neumann
	598	!-- boundary condition
[19]	599	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	600
	601	ENDIF
	602
	603	ENDIF
	604
	605	!
	606	!-- Compute Coriolis parameter
	607	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	608	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	609
	610	!
[57]	611	!-- Reference temperature to be used in buoyancy terms
	612	IF ( pt_reference /= 9999999.9 ) use_pt_reference = .TRUE.
	613
	614	!
[1]	615	!-- In case of a given slope, compute the relevant quantities
	616	IF ( alpha_surface /= 0.0 ) THEN
	617	IF ( ABS( alpha_surface ) > 90.0 ) THEN
	618	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
	619	'=', alpha_surface, ' ) must be < 90.0'
	620	CALL local_stop
	621	ENDIF
	622	sloping_surface = .TRUE.
	623	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	624	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	625	ENDIF
	626
	627	!
	628	!-- Check time step and cfl_factor
	629	IF ( dt /= -1.0 ) THEN
	630	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
	631	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
	632	CALL local_stop
	633	ENDIF
	634	dt_3d = dt
	635	dt_fixed = .TRUE.
	636	ENDIF
	637
	638	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	639	IF ( cfl_factor == -1.0 ) THEN
	640	IF ( momentum_advec == 'ups-scheme' .OR. &
	641	scalar_advec == 'ups-scheme' ) THEN
	642	cfl_factor = 0.8
	643	ELSE
	644	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	645	cfl_factor = 0.8
	646	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	647	cfl_factor = 0.9
	648	ELSE
	649	cfl_factor = 0.1
	650	ENDIF
	651	ENDIF
	652	ELSE
	653	IF ( myid == 0 ) THEN
	654	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
	655	' out of range'
	656	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
	657	ENDIF
	658	CALL local_stop
	659	ENDIF
	660	ENDIF
	661
	662	!
	663	!-- Store simulated time at begin
	664	simulated_time_at_begin = simulated_time
	665
	666	!
	667	!-- Set wind speed in the Galilei-transformed system
	668	IF ( galilei_transformation ) THEN
	669	IF ( use_ug_for_galilei_tr .AND. &
	670	ug_vertical_gradient_level(1) == 0.0 .AND. &
	671	vg_vertical_gradient_level(1) == 0.0 ) THEN
	672	u_gtrans = ug_surface
	673	v_gtrans = vg_surface
	674	ELSEIF ( use_ug_for_galilei_tr .AND. &
	675	ug_vertical_gradient_level(1) /= 0.0 ) THEN
	676	IF ( myid == 0 ) THEN
	677	PRINT*, '+++ check_parameters:'
	678	PRINT*, ' baroclinicity (ug) not allowed'
	679	PRINT*, ' simultaneously with galilei transformation'
	680	ENDIF
	681	CALL local_stop
	682	ELSEIF ( use_ug_for_galilei_tr .AND. &
	683	vg_vertical_gradient_level(1) /= 0.0 ) THEN
	684	IF ( myid == 0 ) THEN
	685	PRINT*, '+++ check_parameters:'
	686	PRINT*, ' baroclinicity (vg) not allowed'
	687	PRINT*, ' simultaneously with galilei transformation'
	688	ENDIF
	689	CALL local_stop
	690	ELSE
	691	IF ( myid == 0 ) THEN
	692	PRINT*, '+++ WARNING: check_parameters:'
	693	PRINT*, ' variable translation speed used for galilei-tran' // &
	694	'sformation, which'
	695	PRINT*, ' may cause instabilities in stably stratified regions'
	696	ENDIF
	697	ENDIF
	698	ENDIF
	699
	700	!
	701	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	702	!-- fluxes have to be used in the diffusion-terms
	703	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	704
	705	!
	706	!-- Check boundary conditions and set internal variables:
	707	!-- Lateral boundary conditions
[73]	708	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	709	bc_lr /= 'radiation/dirichlet' ) THEN
[1]	710	IF ( myid == 0 ) THEN
	711	PRINT*, '+++ check_parameters:'
	712	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
	713	ENDIF
	714	CALL local_stop
	715	ENDIF
[73]	716	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	717	bc_ns /= 'radiation/dirichlet' ) THEN
[1]	718	IF ( myid == 0 ) THEN
	719	PRINT*, '+++ check_parameters:'
	720	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
	721	ENDIF
	722	CALL local_stop
	723	ENDIF
	724
	725	!
	726	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	727	!-- Willimas advection scheme. Several schemes and tools do not work with
	728	!-- non-cyclic boundary conditions.
	729	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	730	IF ( psolver /= 'multigrid' ) THEN
	731	IF ( myid == 0 ) THEN
	732	PRINT*, '+++ check_parameters:'
	733	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	734	' psolver = ', psolver
	735	ENDIF
	736	CALL local_stop
	737	ENDIF
	738	IF ( momentum_advec /= 'pw-scheme' ) THEN
	739	IF ( myid == 0 ) THEN
	740	PRINT*, '+++ check_parameters:'
	741	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	742	' momentum_advec = ', momentum_advec
	743	ENDIF
	744	CALL local_stop
	745	ENDIF
	746	IF ( scalar_advec /= 'pw-scheme' ) THEN
	747	IF ( myid == 0 ) THEN
	748	PRINT*, '+++ check_parameters:'
	749	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	750	' scalar_advec = ', scalar_advec
	751	ENDIF
	752	CALL local_stop
	753	ENDIF
	754	IF ( galilei_transformation ) THEN
	755	IF ( myid == 0 ) THEN
	756	PRINT*, '+++ check_parameters:'
	757	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	758	' galilei_transformation = .T.'
	759	ENDIF
	760	CALL local_stop
	761	ENDIF
	762	IF ( conserve_volume_flow ) THEN
	763	IF ( myid == 0 ) THEN
	764	PRINT*, '+++ check_parameters:'
	765	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	766	' conserve_volume_flow = .T.'
	767	ENDIF
	768	CALL local_stop
	769	ENDIF
	770	ENDIF
	771
	772	!
	773	!-- Bottom boundary condition for the turbulent Kinetic energy
	774	IF ( bc_e_b == 'neumann' ) THEN
	775	ibc_e_b = 1
	776	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
	777	IF ( myid == 0 ) THEN
	778	PRINT*, '+++ WARNING: check_parameters:'
	779	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
	780	ENDIF
	781	ENDIF
	782	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	783	ibc_e_b = 2
	784	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
	785	IF ( myid == 0 ) THEN
	786	PRINT*, '+++ WARNING: check_parameters:'
	787	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
	788	ENDIF
	789	ENDIF
	790	IF ( .NOT. prandtl_layer ) THEN
	791	bc_e_b = 'neumann'
	792	ibc_e_b = 1
	793	IF ( myid == 0 ) THEN
	794	PRINT*, '+++ WARNING: check_parameters:'
	795	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
	796	ENDIF
	797	ENDIF
	798	ELSE
	799	IF ( myid == 0 ) THEN
	800	PRINT*, '+++ check_parameters:'
	801	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
	802	ENDIF
	803	CALL local_stop
	804	ENDIF
	805
	806	!
	807	!-- Boundary conditions for perturbation pressure
	808	IF ( bc_p_b == 'dirichlet' ) THEN
	809	ibc_p_b = 0
	810	ELSEIF ( bc_p_b == 'neumann' ) THEN
	811	ibc_p_b = 1
	812	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	813	ibc_p_b = 2
	814	ELSE
	815	IF ( myid == 0 ) THEN
	816	PRINT*, '+++ check_parameters:'
	817	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
	818	ENDIF
	819	CALL local_stop
	820	ENDIF
	821	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
	822	IF ( myid == 0 ) THEN
	823	PRINT*, '+++ check_parameters:'
	824	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
	825	' not allowed with'
	826	PRINT*, ' prandtl_layer = .FALSE.'
	827	ENDIF
	828	CALL local_stop
	829	ENDIF
	830	IF ( bc_p_t == 'dirichlet' ) THEN
	831	ibc_p_t = 0
	832	ELSEIF ( bc_p_t == 'neumann' ) THEN
	833	ibc_p_t = 1
	834	ELSE
	835	IF ( myid == 0 ) THEN
	836	PRINT*, '+++ check_parameters:'
	837	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
	838	ENDIF
	839	CALL local_stop
	840	ENDIF
	841
	842	!
	843	!-- Boundary conditions for potential temperature
	844	IF ( bc_pt_b == 'dirichlet' ) THEN
	845	ibc_pt_b = 0
	846	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	847	ibc_pt_b = 1
	848	ELSE
	849	IF ( myid == 0 ) THEN
	850	PRINT*, '+++ check_parameters:'
	851	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
	852	ENDIF
	853	CALL local_stop
	854	ENDIF
	855	IF ( bc_pt_t == 'dirichlet' ) THEN
	856	ibc_pt_t = 0
	857	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	858	ibc_pt_t = 1
[19]	859	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	860	ibc_pt_t = 2
[1]	861	ELSE
	862	IF ( myid == 0 ) THEN
	863	PRINT*, '+++ check_parameters:'
	864	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
	865	ENDIF
	866	CALL local_stop
	867	ENDIF
	868
[20]	869	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	870	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[1]	871
	872	!
	873	!-- A given surface temperature implies Dirichlet boundary condition for
	874	!-- temperature. In this case specification of a constant heat flux is
	875	!-- forbidden.
	876	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	877	surface_heatflux /= 0.0 ) THEN
	878	IF ( myid == 0 ) THEN
	879	PRINT*, '+++ check_parameters:'
	880	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
	881	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
	882	ENDIF
	883	CALL local_stop
	884	ENDIF
	885	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
	886	IF ( myid == 0 ) THEN
	887	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
	888	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
	889	pt_surface_initial_change
	890	ENDIF
	891	CALL local_stop
	892	ENDIF
	893
	894	!
[19]	895	!-- A given temperature at the top implies Dirichlet boundary condition for
	896	!-- temperature. In this case specification of a constant heat flux is
	897	!-- forbidden.
	898	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	899	top_heatflux /= 0.0 ) THEN
	900	IF ( myid == 0 ) THEN
	901	PRINT*, '+++ check_parameters:'
	902	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
	903	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
	904	ENDIF
	905	CALL local_stop
	906	ENDIF
	907
	908	!
[1]	909	!-- In case of moisture or passive scalar, set boundary conditions for total
	910	!-- water content / scalar
	911	IF ( moisture .OR. passive_scalar ) THEN
	912	IF ( moisture ) THEN
	913	sq = 'q'
	914	ELSE
	915	sq = 's'
	916	ENDIF
	917	IF ( bc_q_b == 'dirichlet' ) THEN
	918	ibc_q_b = 0
	919	ELSEIF ( bc_q_b == 'neumann' ) THEN
	920	ibc_q_b = 1
	921	ELSE
	922	IF ( myid == 0 ) THEN
	923	PRINT*, '+++ check_parameters:'
	924	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
	925	ENDIF
	926	CALL local_stop
	927	ENDIF
	928	IF ( bc_q_t == 'dirichlet' ) THEN
	929	ibc_q_t = 0
	930	ELSEIF ( bc_q_t == 'neumann' ) THEN
	931	ibc_q_t = 1
	932	ELSE
	933	IF ( myid == 0 ) THEN
	934	PRINT*, '+++ check_parameters:'
	935	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
	936	ENDIF
	937	CALL local_stop
	938	ENDIF
	939
	940	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	941
	942	!
	943	!-- A given surface humidity implies Dirichlet boundary condition for
	944	!-- moisture. In this case specification of a constant water flux is
	945	!-- forbidden.
	946	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
	947	IF ( myid == 0 ) THEN
	948	PRINT*, '+++ check_parameters:'
	949	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
	950	PRINT*, ' is not allowed with prescribed surface flux'
	951	ENDIF
	952	CALL local_stop
	953	ENDIF
	954	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
	955	IF ( myid == 0 ) THEN
	956	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
	957	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
	958	' = ', q_surface_initial_change
	959	ENDIF
	960	CALL local_stop
	961	ENDIF
	962
	963	ENDIF
	964
	965	!
	966	!-- Boundary conditions for horizontal components of wind speed
	967	IF ( bc_uv_b == 'dirichlet' ) THEN
	968	ibc_uv_b = 0
	969	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	970	ibc_uv_b = 1
	971	IF ( prandtl_layer ) THEN
	972	IF ( myid == 0 ) THEN
	973	PRINT*, '+++ check_parameters:'
	974	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
	975	' is not allowed with'
	976	PRINT*, ' prandtl_layer = .TRUE.'
	977	ENDIF
	978	CALL local_stop
	979	ENDIF
	980	ELSE
	981	IF ( myid == 0 ) THEN
	982	PRINT*, '+++ check_parameters:'
	983	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
	984	ENDIF
	985	CALL local_stop
	986	ENDIF
	987	IF ( bc_uv_t == 'dirichlet' ) THEN
	988	ibc_uv_t = 0
	989	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	990	ibc_uv_t = 1
	991	ELSE
	992	IF ( myid == 0 ) THEN
	993	PRINT*, '+++ check_parameters:'
	994	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
	995	ENDIF
	996	CALL local_stop
	997	ENDIF
	998
	999	!
	1000	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1001	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1002	IF ( momentum_advec == 'ups-scheme' ) THEN
	1003	rayleigh_damping_factor = 0.01
	1004	ELSE
	1005	rayleigh_damping_factor = 0.0
	1006	ENDIF
	1007	ELSE
	1008	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1009	THEN
	1010	IF ( myid == 0 ) THEN
	1011	PRINT*, '+++ check_parameters:'
	1012	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
	1013	' out of range [0.0,1.0]'
	1014	ENDIF
	1015	CALL local_stop
	1016	ENDIF
	1017	ENDIF
	1018
	1019	IF ( rayleigh_damping_height == -1.0 ) THEN
	1020	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1021	ELSE
	1022	IF ( rayleigh_damping_height < 0.0 .OR. &
	1023	rayleigh_damping_height > zu(nzt) ) THEN
	1024	IF ( myid == 0 ) THEN
	1025	PRINT*, '+++ check_parameters:'
	1026	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
	1027	' out of range [0.0,', zu(nzt), ']'
	1028	ENDIF
	1029	CALL local_stop
	1030	ENDIF
	1031	ENDIF
	1032
	1033	!
	1034	!-- Check limiters for Upstream-Spline scheme
	1035	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1036	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1037	overshoot_limit_e < 0.0 ) THEN
	1038	IF ( myid == 0 ) THEN
	1039	PRINT*, '+++ check_parameters:'
	1040	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
	1041	ENDIF
	1042	CALL local_stop
	1043	ENDIF
	1044	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1045	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
	1046	IF ( myid == 0 ) THEN
	1047	PRINT*, '+++ check_parameters:'
	1048	PRINT*, ' ups_limit_... < 0.0 is not allowed'
	1049	ENDIF
	1050	CALL local_stop
	1051	ENDIF
	1052
	1053	!
	1054	!-- Check number of chosen statistic regions. More than 10 regions are not
	1055	!-- allowed, because so far no more than 10 corresponding output files can
	1056	!-- be opened (cf. check_open)
	1057	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
	1058	IF ( myid == 0 ) THEN
	1059	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
	1060	statistic_regions+1
	1061	PRINT*, ' Only 10 regions are allowed'
	1062	ENDIF
	1063	CALL local_stop
	1064	ENDIF
	1065	IF ( normalizing_region > statistic_regions .OR. &
	1066	normalizing_region < 0) THEN
	1067	IF ( myid == 0 ) THEN
	1068	PRINT*, '+++ check_parameters: normalizing_region = ', &
	1069	normalizing_region, ' is unknown'
	1070	PRINT*, ' Must be <= ', statistic_regions
	1071	ENDIF
	1072	CALL local_stop
	1073	ENDIF
	1074
	1075	!
	1076	!-- Set the default intervals for data output, if necessary
	1077	!-- NOTE: dt_dosp has already been set in package_parin
	1078	IF ( dt_data_output /= 9999999.9 ) THEN
	1079	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1080	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1081	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1082	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1083	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1084	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1085	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1086	ENDIF
	1087
	1088	!
	1089	!-- Set the default skip time intervals for data output, if necessary
	1090	IF ( skip_time_dopr == 9999999.9 ) &
	1091	skip_time_dopr = skip_time_data_output
	1092	IF ( skip_time_dosp == 9999999.9 ) &
	1093	skip_time_dosp = skip_time_data_output
	1094	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1095	skip_time_do2d_xy = skip_time_data_output
	1096	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1097	skip_time_do2d_xz = skip_time_data_output
	1098	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1099	skip_time_do2d_yz = skip_time_data_output
	1100	IF ( skip_time_do3d == 9999999.9 ) &
	1101	skip_time_do3d = skip_time_data_output
	1102	IF ( skip_time_data_output_av == 9999999.9 ) &
	1103	skip_time_data_output_av = skip_time_data_output
	1104
	1105	!
	1106	!-- Check the average intervals (first for 3d-data, then for profiles and
	1107	!-- spectra)
	1108	IF ( averaging_interval > dt_data_output_av ) THEN
	1109	IF ( myid == 0 ) THEN
	1110	PRINT*, '+++ check_parameters: average_interval=', &
	1111	averaging_interval, ' must be <= dt_data_output=', &
	1112	dt_data_output
	1113	ENDIF
	1114	CALL local_stop
	1115	ENDIF
	1116
	1117	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1118	averaging_interval_pr = averaging_interval
	1119	ENDIF
	1120
	1121	IF ( averaging_interval_pr > dt_dopr ) THEN
	1122	IF ( myid == 0 ) THEN
	1123	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
	1124	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
	1125	ENDIF
	1126	CALL local_stop
	1127	ENDIF
	1128
	1129	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1130	averaging_interval_sp = averaging_interval
	1131	ENDIF
	1132
	1133	IF ( averaging_interval_sp > dt_dosp ) THEN
	1134	IF ( myid == 0 ) THEN
	1135	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
	1136	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
	1137	ENDIF
	1138	CALL local_stop
	1139	ENDIF
	1140
	1141	!
	1142	!-- Set the default interval for profiles entering the temporal average
	1143	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1144	dt_averaging_input_pr = dt_averaging_input
	1145	ENDIF
	1146
	1147	!
	1148	!-- Set the default interval for the output of timeseries to a reasonable
	1149	!-- value (tries to minimize the number of calls of flow_statistics)
	1150	IF ( dt_dots == 9999999.9 ) THEN
	1151	IF ( averaging_interval_pr == 0.0 ) THEN
	1152	dt_dots = MIN( dt_run_control, dt_dopr )
	1153	ELSE
	1154	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1155	ENDIF
	1156	ENDIF
	1157
	1158	!
	1159	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1160	IF ( dt_averaging_input > averaging_interval ) THEN
	1161	IF ( myid == 0 ) THEN
	1162	PRINT*, '+++ check_parameters: dt_averaging_input=', &
	1163	dt_averaging_input, ' must be <= averaging_interval=', &
	1164	averaging_interval
	1165	ENDIF
	1166	CALL local_stop
	1167	ENDIF
	1168
	1169	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
	1170	IF ( myid == 0 ) THEN
	1171	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
	1172	dt_averaging_input_pr, &
	1173	' must be <= averaging_interval_pr=', &
	1174	averaging_interval_pr
	1175	ENDIF
	1176	CALL local_stop
	1177	ENDIF
	1178
	1179	!
[72]	1180	!-- Set the default value for the integration interval of precipitation amount
	1181	IF ( precipitation ) THEN
	1182	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1183	precipitation_amount_interval = dt_do2d_xy
	1184	ELSE
	1185	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
	1186	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	1187	'precipitation_amount_interval =', &
	1188	precipitation_amount_interval, &
	1189	' must not be larger than dt_do2d_xy', &
	1190	' = ', dt_do2d_xy
	1191	CALL local_stop
	1192	ENDIF
	1193	ENDIF
	1194	ENDIF
	1195
	1196	!
[1]	1197	!-- Determine the number of output profiles and check whether they are
	1198	!-- permissible
	1199	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1200
	1201	dopr_n = dopr_n + 1
	1202	i = dopr_n
	1203
	1204	!
	1205	!-- Determine internal profile number (for hom, homs)
	1206	!-- and store height levels
	1207	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1208
	1209	CASE ( 'u', '#u' )
	1210	dopr_index(i) = 1
	1211	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1212	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1213	dopr_initial_index(i) = 5
	1214	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1215	data_output_pr(i) = data_output_pr(i)(2:)
	1216	ENDIF
	1217
	1218	CASE ( 'v', '#v' )
	1219	dopr_index(i) = 2
	1220	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
	1221	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1222	dopr_initial_index(i) = 6
	1223	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1224	data_output_pr(i) = data_output_pr(i)(2:)
	1225	ENDIF
	1226
	1227	CASE ( 'w' )
	1228	dopr_index(i) = 3
	1229	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
	1230
	1231	CASE ( 'pt', '#pt' )
	1232	IF ( .NOT. cloud_physics ) THEN
	1233	dopr_index(i) = 4
	1234	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1235	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1236	dopr_initial_index(i) = 7
	1237	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1238	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1239	data_output_pr(i) = data_output_pr(i)(2:)
	1240	ENDIF
	1241	ELSE
	1242	dopr_index(i) = 43
	1243	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1244	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1245	dopr_initial_index(i) = 28
	1246	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
	1247	hom(nzb,2,28,:) = 0.0 ! weil zu(nzb) negativ ist
	1248	data_output_pr(i) = data_output_pr(i)(2:)
	1249	ENDIF
	1250	ENDIF
	1251
	1252	CASE ( 'e' )
	1253	dopr_index(i) = 8
	1254	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1255	hom(nzb,2,8,:) = 0.0
	1256
	1257	CASE ( 'km', '#km' )
	1258	dopr_index(i) = 9
	1259	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1260	hom(nzb,2,9,:) = 0.0
	1261	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1262	dopr_initial_index(i) = 23
	1263	hom(:,2,23,:) = hom(:,2,9,:)
	1264	data_output_pr(i) = data_output_pr(i)(2:)
	1265	ENDIF
	1266
	1267	CASE ( 'kh', '#kh' )
	1268	dopr_index(i) = 10
	1269	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1270	hom(nzb,2,10,:) = 0.0
	1271	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1272	dopr_initial_index(i) = 24
	1273	hom(:,2,24,:) = hom(:,2,10,:)
	1274	data_output_pr(i) = data_output_pr(i)(2:)
	1275	ENDIF
	1276
	1277	CASE ( 'l', '#l' )
	1278	dopr_index(i) = 11
	1279	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1280	hom(nzb,2,11,:) = 0.0
	1281	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1282	dopr_initial_index(i) = 25
	1283	hom(:,2,25,:) = hom(:,2,11,:)
	1284	data_output_pr(i) = data_output_pr(i)(2:)
	1285	ENDIF
	1286
	1287	CASE ( 'w"u"' )
	1288	dopr_index(i) = 12
	1289	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1290	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1291
	1292	CASE ( 'wu' )
	1293	dopr_index(i) = 13
	1294	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1295
	1296	CASE ( 'w"v"' )
	1297	dopr_index(i) = 14
	1298	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1299	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1300
	1301	CASE ( 'wv' )
	1302	dopr_index(i) = 15
	1303	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1304
	1305	CASE ( 'w"pt"' )
	1306	dopr_index(i) = 16
	1307	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1308
	1309	CASE ( 'wpt' )
	1310	dopr_index(i) = 17
	1311	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1312
	1313	CASE ( 'wpt' )
	1314	dopr_index(i) = 18
	1315	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1316
	1317	CASE ( 'wu' )
	1318	dopr_index(i) = 19
	1319	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1320	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1321
	1322	CASE ( 'wv' )
	1323	dopr_index(i) = 20
	1324	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1325	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1326
	1327	CASE ( 'wptBC' )
	1328	dopr_index(i) = 21
	1329	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1330
	1331	CASE ( 'wptBC' )
	1332	dopr_index(i) = 22
	1333	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1334
	1335	CASE ( 'u*2' )
	1336	dopr_index(i) = 30
	1337	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1338
	1339	CASE ( 'v*2' )
	1340	dopr_index(i) = 31
	1341	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1342
	1343	CASE ( 'w*2' )
	1344	dopr_index(i) = 32
	1345	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1346
	1347	CASE ( 'pt*2' )
	1348	dopr_index(i) = 33
	1349	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1350
	1351	CASE ( 'e*' )
	1352	dopr_index(i) = 34
	1353	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1354
	1355	CASE ( 'w2pt' )
	1356	dopr_index(i) = 35
	1357	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1358
	1359	CASE ( 'wpt2' )
	1360	dopr_index(i) = 36
	1361	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1362
	1363	CASE ( 'we' )
	1364	dopr_index(i) = 37
	1365	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1366
	1367	CASE ( 'w*3' )
	1368	dopr_index(i) = 38
	1369	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1370
	1371	CASE ( 'Sw' )
	1372	dopr_index(i) = 39
	1373	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1374
	1375	CASE ( 'q', '#q' )
	1376	IF ( .NOT. cloud_physics ) THEN
	1377	IF ( myid == 0 ) THEN
	1378	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1379	data_output_pr(i), &
	1380	' is not implemented for cloud_physics = FALSE'
	1381	ENDIF
	1382	CALL local_stop
	1383	ELSE
	1384	dopr_index(i) = 41
	1385	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
	1386	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1387	dopr_initial_index(i) = 26
	1388	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1389	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1390	data_output_pr(i) = data_output_pr(i)(2:)
	1391	ENDIF
	1392	ENDIF
	1393
	1394	CASE ( 's', '#s' )
	1395	IF ( .NOT. passive_scalar ) THEN
	1396	IF ( myid == 0 ) THEN
	1397	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1398	data_output_pr(i), &
	1399	' is not implemented for passive_scalar = FALSE'
	1400	ENDIF
	1401	CALL local_stop
	1402	ELSE
	1403	dopr_index(i) = 41
	1404	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
	1405	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1406	dopr_initial_index(i) = 26
	1407	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1408	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1409	data_output_pr(i) = data_output_pr(i)(2:)
	1410	ENDIF
	1411	ENDIF
	1412
	1413	CASE ( 'qv', '#qv' )
	1414	IF ( .NOT. cloud_physics ) THEN
	1415	dopr_index(i) = 41
	1416	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
	1417	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1418	dopr_initial_index(i) = 26
	1419	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1420	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1421	data_output_pr(i) = data_output_pr(i)(2:)
	1422	ENDIF
	1423	ELSE
	1424	dopr_index(i) = 42
	1425	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
	1426	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1427	dopr_initial_index(i) = 27
	1428	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1429	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1430	data_output_pr(i) = data_output_pr(i)(2:)
	1431	ENDIF
	1432	ENDIF
	1433
	1434	CASE ( 'lpt', '#lpt' )
	1435	IF ( .NOT. cloud_physics ) THEN
	1436	IF ( myid == 0 ) THEN
	1437	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1438	data_output_pr(i), &
	1439	' is not implemented for cloud_physics = FALSE'
	1440	ENDIF
	1441	CALL local_stop
	1442	ELSE
	1443	dopr_index(i) = 4
	1444	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1445	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1446	dopr_initial_index(i) = 7
	1447	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1448	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1449	data_output_pr(i) = data_output_pr(i)(2:)
	1450	ENDIF
	1451	ENDIF
	1452
	1453	CASE ( 'vpt', '#vpt' )
	1454	dopr_index(i) = 44
	1455	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
	1456	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1457	dopr_initial_index(i) = 29
	1458	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1459	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1460	data_output_pr(i) = data_output_pr(i)(2:)
	1461	ENDIF
	1462
	1463	CASE ( 'w"vpt"' )
	1464	dopr_index(i) = 45
	1465	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1466
	1467	CASE ( 'wvpt' )
	1468	dopr_index(i) = 46
	1469	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1470
	1471	CASE ( 'wvpt' )
	1472	dopr_index(i) = 47
	1473	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1474
	1475	CASE ( 'w"q"' )
	1476	IF ( .NOT. cloud_physics ) THEN
	1477	IF ( myid == 0 ) THEN
	1478	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1479	data_output_pr(i), &
	1480	' is not implemented for cloud_physics = FALSE'
	1481	ENDIF
	1482	CALL local_stop
	1483	ELSE
	1484	dopr_index(i) = 48
	1485	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1486	ENDIF
	1487
	1488	CASE ( 'wq' )
	1489	IF ( .NOT. cloud_physics ) THEN
	1490	IF ( myid == 0 ) THEN
	1491	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1492	data_output_pr(i), &
	1493	' is not implemented for cloud_physics = FALSE'
	1494	ENDIF
	1495	CALL local_stop
	1496	ELSE
	1497	dopr_index(i) = 49
	1498	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1499	ENDIF
	1500
	1501	CASE ( 'wq' )
	1502	IF ( .NOT. cloud_physics ) THEN
	1503	IF ( myid == 0 ) THEN
	1504	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1505	data_output_pr(i), &
	1506	' is not implemented for cloud_physics = FALSE'
	1507	ENDIF
	1508	CALL local_stop
	1509	ELSE
	1510	dopr_index(i) = 50
	1511	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1512	ENDIF
	1513
	1514	CASE ( 'w"s"' )
	1515	IF ( .NOT. passive_scalar ) THEN
	1516	IF ( myid == 0 ) THEN
	1517	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1518	data_output_pr(i), &
	1519	' is not implemented for passive_scalar = FALSE'
	1520	ENDIF
	1521	CALL local_stop
	1522	ELSE
	1523	dopr_index(i) = 48
	1524	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1525	ENDIF
	1526
	1527	CASE ( 'ws' )
	1528	IF ( .NOT. passive_scalar ) THEN
	1529	IF ( myid == 0 ) THEN
	1530	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1531	data_output_pr(i), &
	1532	' is not implemented for passive_scalar = FALSE'
	1533	ENDIF
	1534	CALL local_stop
	1535	ELSE
	1536	dopr_index(i) = 49
	1537	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1538	ENDIF
	1539
	1540	CASE ( 'ws' )
	1541	IF ( .NOT. passive_scalar ) THEN
	1542	IF ( myid == 0 ) THEN
	1543	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1544	data_output_pr(i), &
	1545	' is not implemented for passive_scalar = FALSE'
	1546	ENDIF
	1547	CALL local_stop
	1548	ELSE
	1549	dopr_index(i) = 50
	1550	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1551	ENDIF
	1552
	1553	CASE ( 'w"qv"' )
	1554	IF ( moisture .AND. .NOT. cloud_physics ) &
	1555	THEN
	1556	dopr_index(i) = 48
	1557	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1558	ELSEIF( moisture .AND. cloud_physics ) THEN
	1559	dopr_index(i) = 51
	1560	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1561	ELSE
	1562	IF ( myid == 0 ) THEN
	1563	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1564	data_output_pr(i), &
	1565	' is not implemented for cloud_physics = FALSE', &
	1566	' and moisture = FALSE'
	1567	ENDIF
	1568	CALL local_stop
	1569	ENDIF
	1570
	1571	CASE ( 'wqv' )
	1572	IF ( moisture .AND. .NOT. cloud_physics ) &
	1573	THEN
	1574	dopr_index(i) = 49
	1575	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1576	ELSEIF( moisture .AND. cloud_physics ) THEN
	1577	dopr_index(i) = 52
	1578	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1579	ELSE
	1580	IF ( myid == 0 ) THEN
	1581	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1582	data_output_pr(i), &
	1583	' is not implemented for cloud_physics = FALSE', &
	1584	' and moisture = FALSE'
	1585	ENDIF
	1586	CALL local_stop
	1587	ENDIF
	1588
	1589	CASE ( 'wqv' )
	1590	IF ( moisture .AND. .NOT. cloud_physics ) &
	1591	THEN
	1592	dopr_index(i) = 50
	1593	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1594	ELSEIF( moisture .AND. cloud_physics ) THEN
	1595	dopr_index(i) = 53
	1596	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1597	ELSE
	1598	IF ( myid == 0 ) THEN
	1599	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1600	data_output_pr(i), &
	1601	' is not implemented for cloud_physics = FALSE', &
	1602	' and moisture = FALSE'
	1603	ENDIF
	1604	CALL local_stop
	1605	ENDIF
	1606
	1607	CASE ( 'ql' )
	1608	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
	1609	IF ( myid == 0 ) THEN
	1610	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1611	data_output_pr(i), &
	1612	' is not implemented for cloud_physics = FALSE'
	1613	ENDIF
	1614	CALL local_stop
	1615	ELSE
	1616	dopr_index(i) = 54
	1617	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	1618	ENDIF
	1619
	1620	CASE ( 'wuu*/dz' )
	1621	dopr_index(i) = 55
	1622	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	1623
	1624	CASE ( 'wp/dz' )
	1625	dopr_index(i) = 56
	1626	hom(:,2,56,:) = SPREAD( zu, 2, statistic_regions+1 )
	1627
	1628	CASE ( 'w"e/dz' )
	1629	dopr_index(i) = 57
	1630	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	1631
	1632	CASE ( 'u"pt"' )
	1633	dopr_index(i) = 58
	1634	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	1635
	1636	CASE ( 'upt' )
	1637	dopr_index(i) = 59
	1638	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	1639
	1640	CASE ( 'upt_t' )
	1641	dopr_index(i) = 60
	1642	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	1643
	1644	CASE ( 'v"pt"' )
	1645	dopr_index(i) = 61
	1646	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	1647
	1648	CASE ( 'vpt' )
	1649	dopr_index(i) = 62
	1650	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	1651
	1652	CASE ( 'vpt_t' )
	1653	dopr_index(i) = 63
	1654	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	1655
	1656
	1657	CASE DEFAULT
	1658	IF ( myid == 0 ) THEN
	1659	PRINT*, '+++ check_parameters: unknown output profile: ', &
	1660	'data_output_pr = ', data_output_pr(i)
	1661	ENDIF
	1662	CALL local_stop
	1663
	1664	END SELECT
	1665	!
	1666	!-- Check to which of the predefined coordinate systems the profile belongs
	1667	DO k = 1, crmax
	1668	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	1669	/=0 ) &
	1670	THEN
	1671	dopr_crossindex(i) = k
	1672	EXIT
	1673	ENDIF
	1674	ENDDO
	1675	!
	1676	!-- Generate the text for the labels of the PROFIL output file. "-characters
	1677	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	1678	!-- control characters
	1679	dopr_label(i) = data_output_pr(i)
	1680	position = INDEX( dopr_label(i) , '"' )
	1681	DO WHILE ( position /= 0 )
	1682	dopr_label(i)(position:position) = ''''
	1683	position = INDEX( dopr_label(i) , '"' )
	1684	ENDDO
	1685
	1686	ENDDO
	1687
	1688	!
	1689	!-- y-value range of the coordinate system (PROFIL).
	1690	!-- x-value range determined in plot_1d.
	1691	cross_uymin = 0.0
	1692	IF ( z_max_do1d == -1.0 ) THEN
	1693	cross_uymax = zu(nzt+1)
	1694	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
	1695	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
	1696	z_max_do1d,' must be >= ', zu(nzb+1), &
	1697	' or <= ', zu(nzt+1)
	1698	CALL local_stop
	1699	ELSE
	1700	cross_uymax = z_max_do1d
	1701	ENDIF
	1702
	1703	!
	1704	!-- Check whether the chosen normalizing factor for the coordinate systems is
	1705	!-- permissible
	1706	DO i = 1, crmax
	1707	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	1708
	1709	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	1710	j = 0
	1711
	1712	CASE DEFAULT
	1713	IF ( myid == 0 ) THEN
	1714	PRINT*, '+++ check_parameters: unknown normalize method'
	1715	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
	1716	ENDIF
	1717	CALL local_stop
	1718
	1719	END SELECT
	1720	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	1721
	1722	CASE ( '', 'z_i' )
	1723	j = 0
	1724
	1725	CASE DEFAULT
	1726	IF ( myid == 0 ) THEN
	1727	PRINT*, '+++ check_parameters: unknown normalize method'
	1728	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
	1729	ENDIF
	1730	CALL local_stop
	1731
	1732	END SELECT
	1733	ENDDO
	1734	!
	1735	!-- Check normalized y-value range of the coordinate system (PROFIL)
	1736	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	1737	THEN
	1738	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
	1739	'd=', z_max_do1d_normalized, ' must be >= 0.0'
	1740	CALL local_stop
	1741	ENDIF
	1742
	1743
	1744	!
	1745	!-- Append user-defined data output variables to the standard data output
	1746	IF ( data_output_user(1) /= ' ' ) THEN
	1747	i = 1
	1748	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	1749	i = i + 1
	1750	ENDDO
	1751	j = 1
	1752	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	1753	IF ( i > 100 ) THEN
	1754	IF ( myid == 0 ) THEN
	1755	PRINT*, '+++ check_parameters: number of output quantitities', &
	1756	' given by data_output and data_output_user'
	1757	PRINT*, ' exceeds the limit of 100'
	1758	ENDIF
	1759	CALL local_stop
	1760	ENDIF
	1761	data_output(i) = data_output_user(j)
	1762	i = i + 1
	1763	j = j + 1
	1764	ENDDO
	1765	ENDIF
	1766
	1767	!
	1768	!-- Check and set steering parameters for 2d/3d data output and averaging
	1769	i = 1
	1770	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	1771	!
	1772	!-- Check for data averaging
	1773	ilen = LEN_TRIM( data_output(i) )
	1774	j = 0 ! no data averaging
	1775	IF ( ilen > 3 ) THEN
	1776	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	1777	j = 1 ! data averaging
	1778	data_output(i) = data_output(i)(1:ilen-3)
	1779	ENDIF
	1780	ENDIF
	1781	!
	1782	!-- Check for cross section or volume data
	1783	ilen = LEN_TRIM( data_output(i) )
	1784	k = 0 ! 3d data
	1785	var = data_output(i)(1:ilen)
	1786	IF ( ilen > 3 ) THEN
	1787	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	1788	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	1789	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	1790	k = 1 ! 2d data
	1791	var = data_output(i)(1:ilen-3)
	1792	ENDIF
	1793	ENDIF
	1794	!
	1795	!-- Check for allowed value and set units
	1796	SELECT CASE ( TRIM( var ) )
	1797
	1798	CASE ( 'e' )
	1799	IF ( constant_diffusion ) THEN
	1800	IF ( myid == 0 ) THEN
	1801	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1802	'" requires constant_diffusion = .FALSE.'
	1803	ENDIF
	1804	CALL local_stop
	1805	ENDIF
	1806	unit = 'm2/s2'
	1807
	1808	CASE ( 'pc', 'pr' )
	1809	IF ( .NOT. particle_advection ) THEN
	1810	IF ( myid == 0 ) THEN
	1811	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1812	'" requires particle package'
	1813	PRINT*, ' (mrun-option "-p particles")'
	1814	ENDIF
	1815	CALL local_stop
	1816	ENDIF
	1817	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	1818	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	1819
	1820	CASE ( 'q', 'vpt' )
	1821	IF ( .NOT. moisture ) THEN
	1822	IF ( myid == 0 ) THEN
	1823	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1824	'" requires moisture = .TRUE.'
	1825	ENDIF
	1826	CALL local_stop
	1827	ENDIF
	1828	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	1829	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	1830
	1831	CASE ( 'ql' )
	1832	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
	1833	IF ( myid == 0 ) THEN
	1834	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1835	'" requires cloud_physics = .TRUE.'
	1836	PRINT*, ' or cloud_droplets = .TRUE.'
	1837	ENDIF
	1838	CALL local_stop
	1839	ENDIF
	1840	unit = 'kg/kg'
	1841
	1842	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	1843	IF ( .NOT. cloud_droplets ) THEN
	1844	IF ( myid == 0 ) THEN
	1845	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1846	'" requires cloud_droplets = .TRUE.'
	1847	ENDIF
	1848	CALL local_stop
	1849	ENDIF
	1850	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	1851	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	1852	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	1853
	1854	CASE ( 'qv' )
	1855	IF ( .NOT. cloud_physics ) THEN
	1856	IF ( myid == 0 ) THEN
	1857	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1858	'" requires cloud_physics = .TRUE.'
	1859	ENDIF
	1860	CALL local_stop
	1861	ENDIF
	1862	unit = 'kg/kg'
	1863
	1864	CASE ( 's' )
	1865	IF ( .NOT. passive_scalar ) THEN
	1866	IF ( myid == 0 ) THEN
	1867	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1868	'" requires passive_scalar = .TRUE.'
	1869	ENDIF
	1870	CALL local_stop
	1871	ENDIF
	1872	unit = 'conc'
	1873
[72]	1874	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	1875	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
	1876	IF ( myid == 0 ) THEN
	1877	PRINT*, '+++ check_parameters: illegal value for data_',&
	1878	'output: "', TRIM( var ), '" is only allowed'
	1879	PRINT*, ' for horizontal cross section'
	1880	ENDIF
	1881	CALL local_stop
	1882	ENDIF
	1883	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
	1884	IF ( myid == 0 ) THEN
	1885	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1886	'" requires cloud_physics = .TRUE.'
	1887	ENDIF
	1888	CALL local_stop
	1889	ENDIF
[72]	1890	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
	1891	IF ( myid == 0 ) THEN
	1892	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1893	'" requires precipitation = .TRUE.'
	1894	ENDIF
	1895	CALL local_stop
	1896	ENDIF
	1897	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
	1898	IF ( myid == 0 ) THEN
	1899	PRINT*, '+++ check_parameters: temporal averaging of ', &
	1900	' precipitation amount "', TRIM( var ), &
	1901	'" not possible'
	1902	ENDIF
	1903	CALL local_stop
	1904	ENDIF
	1905	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
	1906	IF ( myid == 0 ) THEN
	1907	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	1908	'" requires precipitation = .TRUE.'
	1909	ENDIF
	1910	CALL local_stop
	1911	ENDIF
	1912
	1913
[1]	1914	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	1915	IF ( TRIM( var ) == 't*' ) unit = 'K'
	1916	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	1917	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	1918	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	1919	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	1920
	1921	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	1922	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	1923	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	1924	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	1925	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	1926	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	1927	CONTINUE
	1928
	1929	CASE DEFAULT
	1930	CALL user_check_data_output( var, unit )
	1931
	1932	IF ( unit == 'illegal' ) THEN
	1933	IF ( myid == 0 ) THEN
	1934	IF ( data_output_user(1) /= ' ' ) THEN
	1935	PRINT*, '+++ check_parameters: illegal value for data_',&
	1936	'output or data_output_user: "', &
	1937	TRIM( data_output(i) ), '"'
	1938	ELSE
	1939	PRINT*, '+++ check_parameters: illegal value for data_',&
	1940	'output: "', TRIM( data_output(i) ), '"'
	1941	ENDIF
	1942	ENDIF
	1943	CALL local_stop
	1944	ENDIF
	1945
	1946	END SELECT
	1947	!
	1948	!-- Set the internal steering parameters appropriately
	1949	IF ( k == 0 ) THEN
	1950	do3d_no(j) = do3d_no(j) + 1
	1951	do3d(j,do3d_no(j)) = data_output(i)
	1952	do3d_unit(j,do3d_no(j)) = unit
	1953	ELSE
	1954	do2d_no(j) = do2d_no(j) + 1
	1955	do2d(j,do2d_no(j)) = data_output(i)
	1956	do2d_unit(j,do2d_no(j)) = unit
	1957	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	1958	data_output_xy(j) = .TRUE.
	1959	ENDIF
	1960	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	1961	data_output_xz(j) = .TRUE.
	1962	ENDIF
	1963	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	1964	data_output_yz(j) = .TRUE.
	1965	ENDIF
	1966	ENDIF
	1967
	1968	IF ( j == 1 ) THEN
	1969	!
	1970	!-- Check, if variable is already subject to averaging
	1971	found = .FALSE.
	1972	DO k = 1, doav_n
	1973	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	1974	ENDDO
	1975
	1976	IF ( .NOT. found ) THEN
	1977	doav_n = doav_n + 1
	1978	doav(doav_n) = var
	1979	ENDIF
	1980	ENDIF
	1981
	1982	i = i + 1
	1983	ENDDO
	1984
	1985	!
	1986	!-- Store sectional planes in one shared array
	1987	section(:,1) = section_xy
	1988	section(:,2) = section_xz
	1989	section(:,3) = section_yz
	1990
	1991	!
	1992	!-- Upper plot limit (grid point value) for 1D profiles
	1993	IF ( z_max_do1d == -1.0 ) THEN
	1994	nz_do1d = nzt+1
	1995	ELSE
	1996	DO k = nzb+1, nzt+1
	1997	nz_do1d = k
	1998	IF ( zw(k) > z_max_do1d ) EXIT
	1999	ENDDO
	2000	ENDIF
	2001
	2002	!
	2003	!-- Upper plot limit for 2D vertical sections
	2004	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2005	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
	2006	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
	2007	z_max_do2d, ' must be >= ', zu(nzb+1), &
	2008	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
	2009	CALL local_stop
	2010	ENDIF
	2011
	2012	!
	2013	!-- Upper plot limit for 3D arrays
	2014	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2015
	2016	!
	2017	!-- Determine and check accuracy for compressed 3D plot output
	2018	IF ( do3d_compress ) THEN
	2019	!
	2020	!-- Compression only permissible on T3E machines
	2021	IF ( host(1:3) /= 't3e' ) THEN
	2022	IF ( myid == 0 ) THEN
	2023	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
	2024	'ed on host "', TRIM( host ), '"'
	2025	ENDIF
	2026	CALL local_stop
	2027	ENDIF
	2028
	2029	i = 1
	2030	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2031
	2032	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2033	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2034	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
	2035	IF ( myid == 0 ) THEN
	2036	PRINT*, '+++ check_parameters: illegal precision: ', &
	2037	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
	2038	ENDIF
	2039	CALL local_stop
	2040	ENDIF
	2041
	2042	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2043	var = do3d_comp_prec(i)(1:ilen-1)
	2044
	2045	SELECT CASE ( var )
	2046
	2047	CASE ( 'u' )
	2048	j = 1
	2049	CASE ( 'v' )
	2050	j = 2
	2051	CASE ( 'w' )
	2052	j = 3
	2053	CASE ( 'p' )
	2054	j = 4
	2055	CASE ( 'pt' )
	2056	j = 5
	2057
	2058	CASE DEFAULT
	2059	IF ( myid == 0 ) THEN
	2060	PRINT*, '+++ check_parameters: unknown variable in ', &
	2061	'assignment'
	2062	PRINT*, ' do3d_comp_prec(', i, ')="', &
	2063	TRIM( do3d_comp_prec(i) ),'"'
	2064	ENDIF
	2065	CALL local_stop
	2066
	2067	END SELECT
	2068
	2069	plot_3d_precision(j)%precision = prec
	2070	i = i + 1
	2071
	2072	ENDDO
	2073	ENDIF
	2074
	2075	!
	2076	!-- Check the data output format(s)
	2077	IF ( data_output_format(1) == ' ' ) THEN
	2078	!
	2079	!-- Default value
	2080	netcdf_output = .TRUE.
	2081	ELSE
	2082	i = 1
	2083	DO WHILE ( data_output_format(i) /= ' ' )
	2084
	2085	SELECT CASE ( data_output_format(i) )
	2086
	2087	CASE ( 'netcdf' )
	2088	netcdf_output = .TRUE.
	2089	CASE ( 'iso2d' )
	2090	iso2d_output = .TRUE.
	2091	CASE ( 'profil' )
	2092	profil_output = .TRUE.
	2093	CASE ( 'avs' )
	2094	avs_output = .TRUE.
	2095
	2096	CASE DEFAULT
	2097	IF ( myid == 0 ) THEN
	2098	PRINT*, '+++ check_parameters:'
	2099	PRINT*, ' unknown value for data_output_format "', &
	2100	TRIM( data_output_format(i) ),'"'
	2101	ENDIF
	2102	CALL local_stop
	2103
	2104	END SELECT
	2105
	2106	i = i + 1
	2107	IF ( i > 10 ) EXIT
	2108
	2109	ENDDO
	2110
	2111	ENDIF
	2112
	2113	!
	2114	!-- Check netcdf precison
	2115	ldum = .FALSE.
	2116	CALL define_netcdf_header( 'ch', ldum, 0 )
	2117
	2118	!
	2119	!-- Check, whether a constant diffusion coefficient shall be used
	2120	IF ( km_constant /= -1.0 ) THEN
	2121	IF ( km_constant < 0.0 ) THEN
	2122	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
	2123	km_constant, ' < 0.0'
	2124	CALL local_stop
	2125	ELSE
	2126	IF ( prandtl_number < 0.0 ) THEN
	2127	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
	2128	prandtl_number, ' < 0.0'
	2129	CALL local_stop
	2130	ENDIF
	2131	constant_diffusion = .TRUE.
	2132
	2133	IF ( prandtl_layer ) THEN
	2134	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
	2135	'is not allowed with fixed value of km'
	2136	CALL local_stop
	2137	ENDIF
	2138	ENDIF
	2139	ENDIF
	2140
	2141	!
	2142	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2143	!-- for the horizontal diffusivity used within the outflow damping layer,
	2144	!-- and check/set the width of the damping layer
	2145	IF ( bc_lr /= 'cyclic' ) THEN
	2146	IF ( km_damp_max == -1.0 ) THEN
	2147	km_damp_max = 0.5 * dx
	2148	ENDIF
	2149	IF ( outflow_damping_width == -1.0 ) THEN
	2150	outflow_damping_width = MIN( 20, nx/2 )
	2151	ENDIF
	2152	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
	2153	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2154	'idth out of range'
	2155	CALL local_stop
	2156	ENDIF
	2157	ENDIF
	2158
	2159	IF ( bc_ns /= 'cyclic' ) THEN
	2160	IF ( km_damp_max == -1.0 ) THEN
	2161	km_damp_max = 0.5 * dy
	2162	ENDIF
	2163	IF ( outflow_damping_width == -1.0 ) THEN
	2164	outflow_damping_width = MIN( 20, ny/2 )
	2165	ENDIF
	2166	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
	2167	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2168	'idth out of range'
	2169	CALL local_stop
	2170	ENDIF
	2171	ENDIF
	2172
	2173	!
	2174	!-- Check value range for rif
	2175	IF ( rif_min >= rif_max ) THEN
	2176	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
	2177	' must be less than rif_max=', rif_max
	2178	CALL local_stop
	2179	ENDIF
	2180
	2181	!
	2182	!-- Determine upper and lower hight level indices for random perturbations
	2183	IF ( disturbance_level_b == -1.0 ) THEN
	2184	disturbance_level_b = zu(nzb+3)
	2185	disturbance_level_ind_b = nzb + 3
	2186	ELSEIF ( disturbance_level_b < zu(3) ) THEN
	2187	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2188	disturbance_level_b, ' must be >= ',zu(3), &
	2189	'(zu(3))'
	2190	CALL local_stop
	2191	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
	2192	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2193	disturbance_level_b, ' must be <= ',zu(nzt-2),&
	2194	'(zu(nzt-2))'
	2195	CALL local_stop
	2196	ELSE
	2197	DO k = 3, nzt-2
	2198	IF ( disturbance_level_b <= zu(k) ) THEN
	2199	disturbance_level_ind_b = k
	2200	EXIT
	2201	ENDIF
	2202	ENDDO
	2203	ENDIF
	2204
	2205	IF ( disturbance_level_t == -1.0 ) THEN
	2206	disturbance_level_t = zu(nzt/3)
	2207	disturbance_level_ind_t = nzt / 3
	2208	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
	2209	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2210	disturbance_level_t, ' must be <= ',zu(nzt-2),&
	2211	'(zu(nzt-2))'
	2212	CALL local_stop
	2213	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
	2214	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2215	disturbance_level_t, ' must be >= ', &
	2216	'disturbance_level_b=', disturbance_level_b
	2217	CALL local_stop
	2218	ELSE
	2219	DO k = 3, nzt-2
	2220	IF ( disturbance_level_t <= zu(k) ) THEN
	2221	disturbance_level_ind_t = k
	2222	EXIT
	2223	ENDIF
	2224	ENDDO
	2225	ENDIF
	2226
	2227	!
	2228	!-- Check again whether the levels determined this way are ok.
	2229	!-- Error may occur at automatic determination and too few grid points in
	2230	!-- z-direction.
	2231	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
	2232	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	2233	'disturbance_level_ind_t=', &
	2234	disturbance_level_ind_t, ' must be >= ', &
	2235	'disturbance_level_ind_b=', &
	2236	disturbance_level_ind_b
	2237	CALL local_stop
	2238	ENDIF
	2239
	2240	!
	2241	!-- Determine the horizontal index range for random perturbations.
	2242	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2243	!-- near the inflow and the perturbation area is further limited to ...(1)
	2244	!-- after the initial phase of the flow.
	2245	dist_nxl = 0; dist_nxr = nx
	2246	dist_nys = 0; dist_nyn = ny
	2247	IF ( bc_lr /= 'cyclic' ) THEN
	2248	IF ( inflow_disturbance_begin == -1 ) THEN
	2249	inflow_disturbance_begin = MIN( 10, nx/2 )
	2250	ENDIF
	2251	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2252	THEN
	2253	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2254	'_begin out of range'
	2255	CALL local_stop
	2256	ENDIF
	2257	IF ( inflow_disturbance_end == -1 ) THEN
	2258	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2259	ENDIF
	2260	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2261	THEN
	2262	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2263	'_end out of range'
	2264	CALL local_stop
	2265	ENDIF
	2266	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2267	IF ( inflow_disturbance_begin == -1 ) THEN
	2268	inflow_disturbance_begin = MIN( 10, ny/2 )
	2269	ENDIF
	2270	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2271	THEN
	2272	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2273	'_begin out of range'
	2274	CALL local_stop
	2275	ENDIF
	2276	IF ( inflow_disturbance_end == -1 ) THEN
	2277	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2278	ENDIF
	2279	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2280	THEN
	2281	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2282	'_end out of range'
	2283	CALL local_stop
	2284	ENDIF
	2285	ENDIF
	2286
[73]	2287	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2288	dist_nxr = nx - inflow_disturbance_begin
	2289	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2290	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2291	dist_nxl = inflow_disturbance_begin
	2292	dist_nxr(1) = inflow_disturbance_end
[73]	2293	ENDIF
	2294	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2295	dist_nyn = ny - inflow_disturbance_begin
	2296	dist_nys(1) = ny - inflow_disturbance_end
[73]	2297	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2298	dist_nys = inflow_disturbance_begin
	2299	dist_nyn(1) = inflow_disturbance_end
	2300	ENDIF
	2301
	2302	!
	2303	!-- Check random generator
	2304	IF ( random_generator /= 'system-specific' .AND. &
	2305	random_generator /= 'numerical-recipes' ) THEN
	2306	IF ( myid == 0 ) THEN
	2307	PRINT*, '+++ check_parameters:'
	2308	PRINT*, ' unknown random generator: random_generator=', &
	2309	random_generator
	2310	ENDIF
	2311	CALL local_stop
	2312	ENDIF
	2313
	2314	!
	2315	!-- Determine damping level index for 1D model
	2316	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2317	IF ( damp_level_1d == -1.0 ) THEN
	2318	damp_level_1d = zu(nzt+1)
	2319	damp_level_ind_1d = nzt + 1
	2320	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
	2321	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
	2322	damp_level_1d, ' must be > 0.0 and < ', &
	2323	'zu(nzt+1)', zu(nzt+1)
	2324	CALL local_stop
	2325	ELSE
	2326	DO k = 1, nzt+1
	2327	IF ( damp_level_1d <= zu(k) ) THEN
	2328	damp_level_ind_1d = k
	2329	EXIT
	2330	ENDIF
	2331	ENDDO
	2332	ENDIF
	2333	ENDIF
	2334	!
	2335	!-- Check some other 1d-model parameters
	2336	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2337	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
	2338	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
	2339	TRIM( mixing_length_1d ), '" is unknown'
	2340	CALL local_stop
	2341	ENDIF
	2342	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2343	TRIM( dissipation_1d ) /= 'detering' ) THEN
	2344	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
	2345	TRIM( dissipation_1d ), '" is unknown'
	2346	CALL local_stop
	2347	ENDIF
	2348
	2349	!
	2350	!-- Set time for the next user defined restart (time_restart is the
	2351	!-- internal parameter for steering restart events)
	2352	IF ( restart_time /= 9999999.9 ) THEN
	2353	IF ( restart_time > simulated_time ) time_restart = restart_time
	2354	ELSE
	2355	!
	2356	!-- In case of a restart run, set internal parameter to default (no restart)
	2357	!-- if the NAMELIST-parameter restart_time is omitted
	2358	time_restart = 9999999.9
	2359	ENDIF
	2360
	2361	!
	2362	!-- Set default value of the time needed to terminate a model run
	2363	IF ( termination_time_needed == -1.0 ) THEN
	2364	IF ( host(1:3) == 'ibm' ) THEN
	2365	termination_time_needed = 300.0
	2366	ELSE
	2367	termination_time_needed = 35.0
	2368	ENDIF
	2369	ENDIF
	2370
	2371	!
	2372	!-- Check the time needed to terminate a model run
	2373	IF ( host(1:3) == 't3e' ) THEN
	2374	!
	2375	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2376	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2377	IF ( termination_time_needed <= 30.0 ) THEN
	2378	IF ( myid == 0 ) THEN
	2379	PRINT*, '+++ check_parameters: termination_time_needed', &
	2380	termination_time_needed
	2381	PRINT*, ' must be > 30.0 on host "', host, &
	2382	'"'
	2383	ENDIF
	2384	CALL local_stop
	2385	ENDIF
	2386	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2387	!
	2388	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2389	!-- because the job time consumed before executing palm (for compiling,
	2390	!-- copying of files, etc.) has to be regarded
	2391	IF ( termination_time_needed < 300.0 ) THEN
	2392	IF ( myid == 0 ) THEN
	2393	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
	2394	'needed', termination_time_needed
	2395	PRINT*, ' should be >= 300.0', &
	2396	' on host "', host, '"'
	2397	ENDIF
	2398	ENDIF
	2399	ENDIF
	2400
	2401
	2402	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |