Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 74

Last change on this file since 74 was 73, checked in by raasch, 18 years ago
preliminary changes for radiation conditions
Property svn:keywords set to `Id`
File size: 86.4 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! "by_user" allowed as initializing action, -data_output_ts,
7	! leapfrog with non-flat topography not allowed any more, loop_optimization
8	! and pt_reference are checked,
9	! output of precipitation amount/rate and roughnes length + check
10	! possible negative humidities are avoided in initial profile,
11	! dirichlet/neumann changed to dirichlet/radiation, etc.
12	!
13	! Former revisions:
14	! -----------------
15	! $Id: check_parameters.f90 73 2007-03-20 08:33:14Z raasch $
16	!
17	! 20 2007-02-26 00:12:32Z raasch
18	! Temperature and humidity gradients at top are now calculated for nzt+1,
19	! top_heatflux and respective boundary condition bc_pt_t is checked
20	!
21	! RCS Log replace by Id keyword, revision history cleaned up
22	!
23	! Revision 1.61 2006/08/04 14:20:25 raasch
24	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
25	! use_upstream_for_tke, default value for dt_dopts,
26	! generation of file header moved from routines palm and header to here
27	!
28	! Revision 1.1 1997/08/26 06:29:23 raasch
29	! Initial revision
30	!
31	!
32	! Description:
33	! ------------
34	! Check control parameters and deduce further quantities.
35	!------------------------------------------------------------------------------!
36
37	USE arrays_3d
38	USE constants
39	USE control_parameters
40	USE grid_variables
41	USE indices
42	USE model_1d
43	USE netcdf_control
44	USE particle_attributes
45	USE pegrid
46	USE profil_parameter
47	USE statistics
48	USE transpose_indices
49
50	IMPLICIT NONE
51
52	CHARACTER (LEN=1) :: sq
53	CHARACTER (LEN=6) :: var
54	CHARACTER (LEN=7) :: unit
55	CHARACTER (LEN=8) :: date
56	CHARACTER (LEN=10) :: time
57	CHARACTER (LEN=100) :: action
58
59	INTEGER :: i, ilen, intervals, iter, j, k, nnxh, nnyh, position, prec
60	LOGICAL :: found, ldum
61	REAL :: gradient, maxn, maxp
62
63
64	!
65	!-- Warning, if host is not set
66	IF ( host(1:1) == ' ' ) THEN
67	IF ( myid == 0 ) THEN
68	PRINT*, '+++ WARNING: check_parameters:'
69	PRINT*, ' "host" is not set. Please check that environment', &
70	' variable "localhost"'
71	PRINT*, ' is set before running PALM'
72	ENDIF
73	ENDIF
74
75	!
76	!-- Generate the file header which is used as a header for most of PALM's
77	!-- output files
78	CALL DATE_AND_TIME( date, time )
79	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
80	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
81
82	WRITE ( run_description_header, '(A,2X,A,A,A,I2.2,2X,A,A,2X,A,1X,A)' ) &
83	TRIM( version ),'run: ', TRIM( run_identifier ), '.', &
84	runnr, 'host: ', TRIM( host ), run_date, run_time
85
86	!
87	!-- Check the general loop optimization method
88	IF ( loop_optimization == 'default' ) THEN
89	IF ( host(1:3) == 'nec' ) THEN
90	loop_optimization = 'vector'
91	ELSE
92	loop_optimization = 'cache'
93	ENDIF
94	ENDIF
95	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
96	.AND. loop_optimization /= 'vector' ) THEN
97	IF ( myid == 0 ) THEN
98	PRINT*, '+++ check_parameters:'
99	PRINT*, ' illegal value given for loop_optimization: ', &
100	TRIM( loop_optimization )
101	ENDIF
102	CALL local_stop
103	ENDIF
104
105	!
106	!-- Check topography setting (check for illegal parameter combinations)
107	IF ( topography /= 'flat' ) THEN
108	action = ' '
109	IF ( scalar_advec /= 'pw-scheme' ) THEN
110	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
111	ENDIF
112	IF ( momentum_advec /= 'pw-scheme' ) THEN
113	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
114	ENDIF
115	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
116	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
117	ENDIF
118	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
119	WRITE( action, '(A,A)' ) 'psolver = ', psolver
120	ENDIF
121	IF ( sloping_surface ) THEN
122	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
123	ENDIF
124	IF ( galilei_transformation ) THEN
125	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
126	ENDIF
127	IF ( cloud_physics ) THEN
128	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
129	ENDIF
130	IF ( cloud_droplets ) THEN
131	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
132	ENDIF
133	IF ( moisture ) THEN
134	WRITE( action, '(A)' ) 'moisture = .TRUE.'
135	ENDIF
136	IF ( .NOT. prandtl_layer ) THEN
137	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
138	ENDIF
139	IF ( action /= ' ' ) THEN
140	IF ( myid == 0 ) THEN
141	PRINT*, '+++ check_parameters:'
142	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
143	ENDIF
144	CALL local_stop
145	ENDIF
146	ENDIF
147	!
148	!-- Check whether there are any illegal values
149	!-- Pressure solver:
150	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
151	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
152	IF ( myid == 0 ) THEN
153	PRINT*, '+++ check_parameters:'
154	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
155	psolver
156	ENDIF
157	CALL local_stop
158	ENDIF
159
160	#if defined( __parallel )
161	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
162	IF ( myid == 0 ) THEN
163	PRINT*, '+++ check_parameters:'
164	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
165	'1d domain-decomposition along x'
166	PRINT*, ' please do not set npey/=1 in the parameter file'
167	ENDIF
168	CALL local_stop
169	ENDIF
170	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
171	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
172	IF ( myid == 0 ) THEN
173	PRINT*, '+++ check_parameters:'
174	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
175	'subdomains with unequal size'
176	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
177	' file'
178	ENDIF
179	CALL local_stop
180	ENDIF
181	#else
182	IF ( psolver == 'poisfft_hybrid' ) THEN
183	IF ( myid == 0 ) THEN
184	PRINT*, '+++ check_parameters:'
185	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
186	'parallel environment'
187	ENDIF
188	CALL local_stop
189	ENDIF
190	#endif
191
192	IF ( psolver == 'multigrid' ) THEN
193	IF ( cycle_mg == 'w' ) THEN
194	gamma_mg = 2
195	ELSEIF ( cycle_mg == 'v' ) THEN
196	gamma_mg = 1
197	ELSE
198	IF ( myid == 0 ) THEN
199	PRINT*, '+++ check_parameters:'
200	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
201	ENDIF
202	CALL local_stop
203	ENDIF
204	ENDIF
205
206	IF ( fft_method /= 'singleton-algorithm' .AND. &
207	fft_method /= 'temperton-algorithm' .AND. &
208	fft_method /= 'system-specific' ) THEN
209	IF ( myid == 0 ) THEN
210	PRINT*, '+++ check_parameters:'
211	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
212	ENDIF
213	CALL local_stop
214	ENDIF
215
216	!
217	!-- Advection schemes:
218	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
219	THEN
220	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
221	'scheme: momentum_advec=', momentum_advec
222	CALL local_stop
223	ENDIF
224	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
225	.AND. timestep_scheme /= 'euler' ) THEN
226	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
227	momentum_advec, ' is not allowed with ', &
228	'timestep_scheme=', timestep_scheme
229	CALL local_stop
230	ENDIF
231
232	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
233	scalar_advec /= 'ups-scheme' ) THEN
234	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
235	'scheme: scalar_advec=', scalar_advec
236	CALL local_stop
237	ENDIF
238
239	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
240	use_upstream_for_tke = .TRUE.
241	IF ( myid == 0 ) THEN
242	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
243	'.TRUE. because use_sgs_for_particles = .TRUE.'
244	ENDIF
245	ENDIF
246
247	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
248	IF ( myid == 0 ) THEN
249	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
250	'not allowed with timestep_scheme=', timestep_scheme
251	ENDIF
252	CALL local_stop
253	ENDIF
254
255	!
256	!-- Timestep schemes:
257	SELECT CASE ( TRIM( timestep_scheme ) )
258
259	CASE ( 'euler' )
260	intermediate_timestep_count_max = 1
261	asselin_filter_factor = 0.0
262
263	CASE ( 'leapfrog', 'leapfrog+euler' )
264	intermediate_timestep_count_max = 1
265
266	CASE ( 'runge-kutta-2' )
267	intermediate_timestep_count_max = 2
268	asselin_filter_factor = 0.0
269
270	CASE ( 'runge-kutta-3' )
271	intermediate_timestep_count_max = 3
272	asselin_filter_factor = 0.0
273
274	CASE DEFAULT
275	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
276	'scheme: timestep_scheme=', timestep_scheme
277	CALL local_stop
278
279	END SELECT
280
281	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
282	THEN
283	IF ( myid == 0 ) THEN
284	PRINT*, '+++ check_parameters: scalar advection scheme "', &
285	TRIM( scalar_advec ), '"'
286	PRINT*, ' does not work with timestep_scheme "', &
287	TRIM( timestep_scheme ), '"'
288	ENDIF
289	CALL local_stop
290	ENDIF
291
292	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
293	THEN
294	IF ( myid == 0 ) THEN
295	PRINT*, '+++ check_parameters: momentum advection scheme "', &
296	TRIM( momentum_advec ), '"'
297	PRINT*, ' does not work with timestep_scheme "', &
298	TRIM( timestep_scheme ), '"'
299	ENDIF
300	CALL local_stop
301	ENDIF
302
303
304	IF ( initializing_actions == ' ' ) THEN
305	IF ( myid == 0 ) THEN
306	PRINT*, '+++ check parameters:'
307	PRINT*, ' no value found for initializing_actions'
308	ENDIF
309	CALL local_stop
310	ENDIF
311
312	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
313	!
314	!-- No model continuation run; several initialising actions are possible
315	action = initializing_actions
316	DO WHILE ( TRIM( action ) /= '' )
317	position = INDEX( action, ' ' )
318	SELECT CASE ( action(1:position-1) )
319
320	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
321	'by_user', 'initialize_vortex', 'initialize_ptanom' )
322	action = action(position+1:)
323
324	CASE DEFAULT
325	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
326	'ng_action unkown or not allowed: action = "', &
327	TRIM(action), '"'
328	CALL local_stop
329
330	END SELECT
331	ENDDO
332	ENDIF
333	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
334	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
335	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
336	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
337	' allowed simultaneously'
338	CALL local_stop
339	ENDIF
340	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
341	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
342	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
343	'"set_constant_profiles" and "by_user" are not', &
344	' allowed simultaneously'
345	CALL local_stop
346	ENDIF
347	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
348	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
349	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
350	'"by_user" and "set_1d-model_profiles" are not', &
351	' allowed simultaneously'
352	CALL local_stop
353	ENDIF
354
355	IF ( cloud_physics .AND. .NOT. moisture ) THEN
356	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
357	cloud_physics, ' is not allowed with ', &
358	'moisture =', moisture
359	CALL local_stop
360	ENDIF
361
362	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
363	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
364	precipitation, ' is not allowed with ', &
365	'cloud_physics =', cloud_physics
366	CALL local_stop
367	ENDIF
368
369	IF ( moisture .AND. sloping_surface ) THEN
370	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE', &
371	'and hang = TRUE are not', &
372	' allowed simultaneously'
373	CALL local_stop
374	ENDIF
375
376	IF ( moisture .AND. scalar_advec == 'ups-scheme' ) THEN
377	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
378	'is not implemented for moisture'
379	CALL local_stop
380	ENDIF
381
382	IF ( passive_scalar .AND. moisture ) THEN
383	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE and', &
384	'passive_scalar = TRUE is not allowed ', &
385	'simultaneously'
386	CALL local_stop
387	ENDIF
388
389	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
390	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
391	'is not implemented for passive_scalar'
392	CALL local_stop
393	ENDIF
394
395	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
396	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
397	TRIM( grid_matching ), &
398	'" found for parameter grid_matching'
399	CALL local_stop
400	ENDIF
401
402	!
403	!-- In case of no model continuation run, check initialising parameters and
404	!-- deduce further quantities
405	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
406
407	!
408	!-- Initial profiles for 1D and 3D model, respectively
409	u_init = ug_surface
410	v_init = vg_surface
411	pt_init = pt_surface
412	IF ( moisture ) q_init = q_surface
413	IF ( passive_scalar ) q_init = s_surface
414
415	!
416	!--
417	!-- If required, compute initial profile of the geostrophic wind
418	!-- (component ug)
419	i = 1
420	gradient = 0.0
421	ug_vertical_gradient_level_ind(1) = 0
422	ug(0) = ug_surface
423	DO k = 1, nzt+1
424	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
425	ug_vertical_gradient_level(i) >= 0.0 ) THEN
426	gradient = ug_vertical_gradient(i) / 100.0
427	ug_vertical_gradient_level_ind(i) = k - 1
428	i = i + 1
429	IF ( i > 10 ) THEN
430	IF ( myid == 0 ) THEN
431	PRINT*, '+++ check_parameters: upper bound 10 of array', &
432	' "ug_vertical_gradient_level_ind" exceeded'
433	ENDIF
434	CALL local_stop
435	ENDIF
436	ENDIF
437	IF ( gradient /= 0.0 ) THEN
438	IF ( k /= 1 ) THEN
439	ug(k) = ug(k-1) + dzu(k) * gradient
440	ELSE
441	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
442	ENDIF
443	ELSE
444	ug(k) = ug(k-1)
445	ENDIF
446	ENDDO
447
448	u_init = ug
449
450	!
451	!-- In case of no given gradients for ug, choose a vanishing gradient
452	IF ( ug_vertical_gradient_level(1) == -1.0 ) THEN
453	ug_vertical_gradient_level(1) = 0.0
454	ENDIF
455
456	!
457	!--
458	!-- If required, compute initial profile of the geostrophic wind
459	!-- (component vg)
460	i = 1
461	gradient = 0.0
462	vg_vertical_gradient_level_ind(1) = 0
463	vg(0) = vg_surface
464	DO k = 1, nzt+1
465	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
466	vg_vertical_gradient_level(i) >= 0.0 ) THEN
467	gradient = vg_vertical_gradient(i) / 100.0
468	vg_vertical_gradient_level_ind(i) = k - 1
469	i = i + 1
470	IF ( i > 10 ) THEN
471	IF ( myid == 0 ) THEN
472	PRINT*, '+++ check_parameters: upper bound 10 of array', &
473	' "vg_vertical_gradient_level_ind" exceeded'
474	ENDIF
475	CALL local_stop
476	ENDIF
477	ENDIF
478	IF ( gradient /= 0.0 ) THEN
479	IF ( k /= 1 ) THEN
480	vg(k) = vg(k-1) + dzu(k) * gradient
481	ELSE
482	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
483	ENDIF
484	ELSE
485	vg(k) = vg(k-1)
486	ENDIF
487	ENDDO
488
489	v_init = vg
490
491	!
492	!-- In case of no given gradients for vg, choose a vanishing gradient
493	IF ( vg_vertical_gradient_level(1) == -1.0 ) THEN
494	vg_vertical_gradient_level(1) = 0.0
495	ENDIF
496
497	!
498	!-- If required, compute initial temperature profile using the given
499	!-- temperature gradient
500	i = 1
501	gradient = 0.0
502	pt_vertical_gradient_level_ind(1) = 0
503	DO k = 1, nzt+1
504	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
505	pt_vertical_gradient_level(i) >= 0.0 ) THEN
506	gradient = pt_vertical_gradient(i) / 100.0
507	pt_vertical_gradient_level_ind(i) = k - 1
508	i = i + 1
509	IF ( i > 10 ) THEN
510	IF ( myid == 0 ) THEN
511	PRINT*, '+++ check_parameters: upper bound 10 of array', &
512	' "pt_vertical_gradient_level_ind" exceeded'
513	ENDIF
514	CALL local_stop
515	ENDIF
516	ENDIF
517	IF ( gradient /= 0.0 ) THEN
518	IF ( k /= 1 ) THEN
519	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
520	ELSE
521	pt_init(k) = pt_init(k-1) + 0.5 * dzu(k) * gradient
522	ENDIF
523	ELSE
524	pt_init(k) = pt_init(k-1)
525	ENDIF
526	ENDDO
527
528	!
529	!-- In case of no given temperature gradients, choose gradient of neutral
530	!-- stratification
531	IF ( pt_vertical_gradient_level(1) == -1.0 ) THEN
532	pt_vertical_gradient_level(1) = 0.0
533	ENDIF
534
535	!
536	!-- Store temperature gradient at the top boundary for possile Neumann
537	!-- boundary condition
538	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
539
540	!
541	!-- If required, compute initial humidity or scalar profile using the given
542	!-- humidity/scalar gradient. In case of scalar transport, initially store
543	!-- values of the scalar parameters on humidity parameters
544	IF ( passive_scalar ) THEN
545	bc_q_b = bc_s_b
546	bc_q_t = bc_s_t
547	q_surface = s_surface
548	q_surface_initial_change = s_surface_initial_change
549	q_vertical_gradient = s_vertical_gradient
550	q_vertical_gradient_level = s_vertical_gradient_level
551	surface_waterflux = surface_scalarflux
552	ENDIF
553
554	IF ( moisture .OR. passive_scalar ) THEN
555
556	i = 1
557	gradient = 0.0
558	q_vertical_gradient_level_ind(1) = 0
559	DO k = 1, nzt+1
560	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
561	q_vertical_gradient_level(i) >= 0.0 ) THEN
562	gradient = q_vertical_gradient(i) / 100.0
563	q_vertical_gradient_level_ind(i) = k - 1
564	i = i + 1
565	IF ( i > 10 ) THEN
566	IF ( myid == 0 ) THEN
567	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
568	'ay "q_vertical_gradient_level_ind" exceeded'
569	ENDIF
570	CALL local_stop
571	ENDIF
572	ENDIF
573	IF ( gradient /= 0.0 ) THEN
574	IF ( k /= 1 ) THEN
575	q_init(k) = q_init(k-1) + dzu(k) * gradient
576	ELSE
577	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
578	ENDIF
579	ELSE
580	q_init(k) = q_init(k-1)
581	ENDIF
582	!
583	!-- Avoid negative humidities
584	IF ( q_init(k) < 0.0 ) THEN
585	q_init(k) = 0.0
586	ENDIF
587	ENDDO
588
589	!
590	!-- In case of no given humidity gradients, choose zero gradient
591	!-- conditions
592	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
593	q_vertical_gradient_level(1) = 0.0
594	ENDIF
595
596	!
597	!-- Store humidity gradient at the top boundary for possile Neumann
598	!-- boundary condition
599	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
600
601	ENDIF
602
603	ENDIF
604
605	!
606	!-- Compute Coriolis parameter
607	f = 2.0 * omega * SIN( phi / 180.0 * pi )
608	fs = 2.0 * omega * COS( phi / 180.0 * pi )
609
610	!
611	!-- Reference temperature to be used in buoyancy terms
612	IF ( pt_reference /= 9999999.9 ) use_pt_reference = .TRUE.
613
614	!
615	!-- In case of a given slope, compute the relevant quantities
616	IF ( alpha_surface /= 0.0 ) THEN
617	IF ( ABS( alpha_surface ) > 90.0 ) THEN
618	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
619	'=', alpha_surface, ' ) must be < 90.0'
620	CALL local_stop
621	ENDIF
622	sloping_surface = .TRUE.
623	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
624	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
625	ENDIF
626
627	!
628	!-- Check time step and cfl_factor
629	IF ( dt /= -1.0 ) THEN
630	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
631	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
632	CALL local_stop
633	ENDIF
634	dt_3d = dt
635	dt_fixed = .TRUE.
636	ENDIF
637
638	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
639	IF ( cfl_factor == -1.0 ) THEN
640	IF ( momentum_advec == 'ups-scheme' .OR. &
641	scalar_advec == 'ups-scheme' ) THEN
642	cfl_factor = 0.8
643	ELSE
644	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
645	cfl_factor = 0.8
646	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
647	cfl_factor = 0.9
648	ELSE
649	cfl_factor = 0.1
650	ENDIF
651	ENDIF
652	ELSE
653	IF ( myid == 0 ) THEN
654	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
655	' out of range'
656	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
657	ENDIF
658	CALL local_stop
659	ENDIF
660	ENDIF
661
662	!
663	!-- Store simulated time at begin
664	simulated_time_at_begin = simulated_time
665
666	!
667	!-- Set wind speed in the Galilei-transformed system
668	IF ( galilei_transformation ) THEN
669	IF ( use_ug_for_galilei_tr .AND. &
670	ug_vertical_gradient_level(1) == 0.0 .AND. &
671	vg_vertical_gradient_level(1) == 0.0 ) THEN
672	u_gtrans = ug_surface
673	v_gtrans = vg_surface
674	ELSEIF ( use_ug_for_galilei_tr .AND. &
675	ug_vertical_gradient_level(1) /= 0.0 ) THEN
676	IF ( myid == 0 ) THEN
677	PRINT*, '+++ check_parameters:'
678	PRINT*, ' baroclinicity (ug) not allowed'
679	PRINT*, ' simultaneously with galilei transformation'
680	ENDIF
681	CALL local_stop
682	ELSEIF ( use_ug_for_galilei_tr .AND. &
683	vg_vertical_gradient_level(1) /= 0.0 ) THEN
684	IF ( myid == 0 ) THEN
685	PRINT*, '+++ check_parameters:'
686	PRINT*, ' baroclinicity (vg) not allowed'
687	PRINT*, ' simultaneously with galilei transformation'
688	ENDIF
689	CALL local_stop
690	ELSE
691	IF ( myid == 0 ) THEN
692	PRINT*, '+++ WARNING: check_parameters:'
693	PRINT*, ' variable translation speed used for galilei-tran' // &
694	'sformation, which'
695	PRINT*, ' may cause instabilities in stably stratified regions'
696	ENDIF
697	ENDIF
698	ENDIF
699
700	!
701	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
702	!-- fluxes have to be used in the diffusion-terms
703	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
704
705	!
706	!-- Check boundary conditions and set internal variables:
707	!-- Lateral boundary conditions
708	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
709	bc_lr /= 'radiation/dirichlet' ) THEN
710	IF ( myid == 0 ) THEN
711	PRINT*, '+++ check_parameters:'
712	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
713	ENDIF
714	CALL local_stop
715	ENDIF
716	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
717	bc_ns /= 'radiation/dirichlet' ) THEN
718	IF ( myid == 0 ) THEN
719	PRINT*, '+++ check_parameters:'
720	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
721	ENDIF
722	CALL local_stop
723	ENDIF
724
725	!
726	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
727	!-- Willimas advection scheme. Several schemes and tools do not work with
728	!-- non-cyclic boundary conditions.
729	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
730	IF ( psolver /= 'multigrid' ) THEN
731	IF ( myid == 0 ) THEN
732	PRINT*, '+++ check_parameters:'
733	PRINT*, ' non-cyclic lateral boundaries do not allow', &
734	' psolver = ', psolver
735	ENDIF
736	CALL local_stop
737	ENDIF
738	IF ( momentum_advec /= 'pw-scheme' ) THEN
739	IF ( myid == 0 ) THEN
740	PRINT*, '+++ check_parameters:'
741	PRINT*, ' non-cyclic lateral boundaries do not allow', &
742	' momentum_advec = ', momentum_advec
743	ENDIF
744	CALL local_stop
745	ENDIF
746	IF ( scalar_advec /= 'pw-scheme' ) THEN
747	IF ( myid == 0 ) THEN
748	PRINT*, '+++ check_parameters:'
749	PRINT*, ' non-cyclic lateral boundaries do not allow', &
750	' scalar_advec = ', scalar_advec
751	ENDIF
752	CALL local_stop
753	ENDIF
754	IF ( galilei_transformation ) THEN
755	IF ( myid == 0 ) THEN
756	PRINT*, '+++ check_parameters:'
757	PRINT*, ' non-cyclic lateral boundaries do not allow', &
758	' galilei_transformation = .T.'
759	ENDIF
760	CALL local_stop
761	ENDIF
762	IF ( conserve_volume_flow ) THEN
763	IF ( myid == 0 ) THEN
764	PRINT*, '+++ check_parameters:'
765	PRINT*, ' non-cyclic lateral boundaries do not allow', &
766	' conserve_volume_flow = .T.'
767	ENDIF
768	CALL local_stop
769	ENDIF
770	ENDIF
771
772	!
773	!-- Bottom boundary condition for the turbulent Kinetic energy
774	IF ( bc_e_b == 'neumann' ) THEN
775	ibc_e_b = 1
776	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
777	IF ( myid == 0 ) THEN
778	PRINT*, '+++ WARNING: check_parameters:'
779	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
780	ENDIF
781	ENDIF
782	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
783	ibc_e_b = 2
784	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
785	IF ( myid == 0 ) THEN
786	PRINT*, '+++ WARNING: check_parameters:'
787	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
788	ENDIF
789	ENDIF
790	IF ( .NOT. prandtl_layer ) THEN
791	bc_e_b = 'neumann'
792	ibc_e_b = 1
793	IF ( myid == 0 ) THEN
794	PRINT*, '+++ WARNING: check_parameters:'
795	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
796	ENDIF
797	ENDIF
798	ELSE
799	IF ( myid == 0 ) THEN
800	PRINT*, '+++ check_parameters:'
801	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
802	ENDIF
803	CALL local_stop
804	ENDIF
805
806	!
807	!-- Boundary conditions for perturbation pressure
808	IF ( bc_p_b == 'dirichlet' ) THEN
809	ibc_p_b = 0
810	ELSEIF ( bc_p_b == 'neumann' ) THEN
811	ibc_p_b = 1
812	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
813	ibc_p_b = 2
814	ELSE
815	IF ( myid == 0 ) THEN
816	PRINT*, '+++ check_parameters:'
817	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
818	ENDIF
819	CALL local_stop
820	ENDIF
821	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
822	IF ( myid == 0 ) THEN
823	PRINT*, '+++ check_parameters:'
824	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
825	' not allowed with'
826	PRINT*, ' prandtl_layer = .FALSE.'
827	ENDIF
828	CALL local_stop
829	ENDIF
830	IF ( bc_p_t == 'dirichlet' ) THEN
831	ibc_p_t = 0
832	ELSEIF ( bc_p_t == 'neumann' ) THEN
833	ibc_p_t = 1
834	ELSE
835	IF ( myid == 0 ) THEN
836	PRINT*, '+++ check_parameters:'
837	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
838	ENDIF
839	CALL local_stop
840	ENDIF
841
842	!
843	!-- Boundary conditions for potential temperature
844	IF ( bc_pt_b == 'dirichlet' ) THEN
845	ibc_pt_b = 0
846	ELSEIF ( bc_pt_b == 'neumann' ) THEN
847	ibc_pt_b = 1
848	ELSE
849	IF ( myid == 0 ) THEN
850	PRINT*, '+++ check_parameters:'
851	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
852	ENDIF
853	CALL local_stop
854	ENDIF
855	IF ( bc_pt_t == 'dirichlet' ) THEN
856	ibc_pt_t = 0
857	ELSEIF ( bc_pt_t == 'neumann' ) THEN
858	ibc_pt_t = 1
859	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
860	ibc_pt_t = 2
861	ELSE
862	IF ( myid == 0 ) THEN
863	PRINT*, '+++ check_parameters:'
864	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
865	ENDIF
866	CALL local_stop
867	ENDIF
868
869	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
870	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
871
872	!
873	!-- A given surface temperature implies Dirichlet boundary condition for
874	!-- temperature. In this case specification of a constant heat flux is
875	!-- forbidden.
876	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
877	surface_heatflux /= 0.0 ) THEN
878	IF ( myid == 0 ) THEN
879	PRINT*, '+++ check_parameters:'
880	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
881	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
882	ENDIF
883	CALL local_stop
884	ENDIF
885	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
886	IF ( myid == 0 ) THEN
887	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
888	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
889	pt_surface_initial_change
890	ENDIF
891	CALL local_stop
892	ENDIF
893
894	!
895	!-- A given temperature at the top implies Dirichlet boundary condition for
896	!-- temperature. In this case specification of a constant heat flux is
897	!-- forbidden.
898	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
899	top_heatflux /= 0.0 ) THEN
900	IF ( myid == 0 ) THEN
901	PRINT*, '+++ check_parameters:'
902	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
903	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
904	ENDIF
905	CALL local_stop
906	ENDIF
907
908	!
909	!-- In case of moisture or passive scalar, set boundary conditions for total
910	!-- water content / scalar
911	IF ( moisture .OR. passive_scalar ) THEN
912	IF ( moisture ) THEN
913	sq = 'q'
914	ELSE
915	sq = 's'
916	ENDIF
917	IF ( bc_q_b == 'dirichlet' ) THEN
918	ibc_q_b = 0
919	ELSEIF ( bc_q_b == 'neumann' ) THEN
920	ibc_q_b = 1
921	ELSE
922	IF ( myid == 0 ) THEN
923	PRINT*, '+++ check_parameters:'
924	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
925	ENDIF
926	CALL local_stop
927	ENDIF
928	IF ( bc_q_t == 'dirichlet' ) THEN
929	ibc_q_t = 0
930	ELSEIF ( bc_q_t == 'neumann' ) THEN
931	ibc_q_t = 1
932	ELSE
933	IF ( myid == 0 ) THEN
934	PRINT*, '+++ check_parameters:'
935	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
936	ENDIF
937	CALL local_stop
938	ENDIF
939
940	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
941
942	!
943	!-- A given surface humidity implies Dirichlet boundary condition for
944	!-- moisture. In this case specification of a constant water flux is
945	!-- forbidden.
946	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
947	IF ( myid == 0 ) THEN
948	PRINT*, '+++ check_parameters:'
949	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
950	PRINT*, ' is not allowed with prescribed surface flux'
951	ENDIF
952	CALL local_stop
953	ENDIF
954	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
955	IF ( myid == 0 ) THEN
956	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
957	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
958	' = ', q_surface_initial_change
959	ENDIF
960	CALL local_stop
961	ENDIF
962
963	ENDIF
964
965	!
966	!-- Boundary conditions for horizontal components of wind speed
967	IF ( bc_uv_b == 'dirichlet' ) THEN
968	ibc_uv_b = 0
969	ELSEIF ( bc_uv_b == 'neumann' ) THEN
970	ibc_uv_b = 1
971	IF ( prandtl_layer ) THEN
972	IF ( myid == 0 ) THEN
973	PRINT*, '+++ check_parameters:'
974	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
975	' is not allowed with'
976	PRINT*, ' prandtl_layer = .TRUE.'
977	ENDIF
978	CALL local_stop
979	ENDIF
980	ELSE
981	IF ( myid == 0 ) THEN
982	PRINT*, '+++ check_parameters:'
983	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
984	ENDIF
985	CALL local_stop
986	ENDIF
987	IF ( bc_uv_t == 'dirichlet' ) THEN
988	ibc_uv_t = 0
989	ELSEIF ( bc_uv_t == 'neumann' ) THEN
990	ibc_uv_t = 1
991	ELSE
992	IF ( myid == 0 ) THEN
993	PRINT*, '+++ check_parameters:'
994	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
995	ENDIF
996	CALL local_stop
997	ENDIF
998
999	!
1000	!-- Compute and check, respectively, the Rayleigh Damping parameter
1001	IF ( rayleigh_damping_factor == -1.0 ) THEN
1002	IF ( momentum_advec == 'ups-scheme' ) THEN
1003	rayleigh_damping_factor = 0.01
1004	ELSE
1005	rayleigh_damping_factor = 0.0
1006	ENDIF
1007	ELSE
1008	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1009	THEN
1010	IF ( myid == 0 ) THEN
1011	PRINT*, '+++ check_parameters:'
1012	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1013	' out of range [0.0,1.0]'
1014	ENDIF
1015	CALL local_stop
1016	ENDIF
1017	ENDIF
1018
1019	IF ( rayleigh_damping_height == -1.0 ) THEN
1020	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1021	ELSE
1022	IF ( rayleigh_damping_height < 0.0 .OR. &
1023	rayleigh_damping_height > zu(nzt) ) THEN
1024	IF ( myid == 0 ) THEN
1025	PRINT*, '+++ check_parameters:'
1026	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1027	' out of range [0.0,', zu(nzt), ']'
1028	ENDIF
1029	CALL local_stop
1030	ENDIF
1031	ENDIF
1032
1033	!
1034	!-- Check limiters for Upstream-Spline scheme
1035	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1036	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1037	overshoot_limit_e < 0.0 ) THEN
1038	IF ( myid == 0 ) THEN
1039	PRINT*, '+++ check_parameters:'
1040	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1041	ENDIF
1042	CALL local_stop
1043	ENDIF
1044	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1045	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1046	IF ( myid == 0 ) THEN
1047	PRINT*, '+++ check_parameters:'
1048	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1049	ENDIF
1050	CALL local_stop
1051	ENDIF
1052
1053	!
1054	!-- Check number of chosen statistic regions. More than 10 regions are not
1055	!-- allowed, because so far no more than 10 corresponding output files can
1056	!-- be opened (cf. check_open)
1057	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1058	IF ( myid == 0 ) THEN
1059	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1060	statistic_regions+1
1061	PRINT*, ' Only 10 regions are allowed'
1062	ENDIF
1063	CALL local_stop
1064	ENDIF
1065	IF ( normalizing_region > statistic_regions .OR. &
1066	normalizing_region < 0) THEN
1067	IF ( myid == 0 ) THEN
1068	PRINT*, '+++ check_parameters: normalizing_region = ', &
1069	normalizing_region, ' is unknown'
1070	PRINT*, ' Must be <= ', statistic_regions
1071	ENDIF
1072	CALL local_stop
1073	ENDIF
1074
1075	!
1076	!-- Set the default intervals for data output, if necessary
1077	!-- NOTE: dt_dosp has already been set in package_parin
1078	IF ( dt_data_output /= 9999999.9 ) THEN
1079	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1080	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1081	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1082	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1083	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1084	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1085	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1086	ENDIF
1087
1088	!
1089	!-- Set the default skip time intervals for data output, if necessary
1090	IF ( skip_time_dopr == 9999999.9 ) &
1091	skip_time_dopr = skip_time_data_output
1092	IF ( skip_time_dosp == 9999999.9 ) &
1093	skip_time_dosp = skip_time_data_output
1094	IF ( skip_time_do2d_xy == 9999999.9 ) &
1095	skip_time_do2d_xy = skip_time_data_output
1096	IF ( skip_time_do2d_xz == 9999999.9 ) &
1097	skip_time_do2d_xz = skip_time_data_output
1098	IF ( skip_time_do2d_yz == 9999999.9 ) &
1099	skip_time_do2d_yz = skip_time_data_output
1100	IF ( skip_time_do3d == 9999999.9 ) &
1101	skip_time_do3d = skip_time_data_output
1102	IF ( skip_time_data_output_av == 9999999.9 ) &
1103	skip_time_data_output_av = skip_time_data_output
1104
1105	!
1106	!-- Check the average intervals (first for 3d-data, then for profiles and
1107	!-- spectra)
1108	IF ( averaging_interval > dt_data_output_av ) THEN
1109	IF ( myid == 0 ) THEN
1110	PRINT*, '+++ check_parameters: average_interval=', &
1111	averaging_interval, ' must be <= dt_data_output=', &
1112	dt_data_output
1113	ENDIF
1114	CALL local_stop
1115	ENDIF
1116
1117	IF ( averaging_interval_pr == 9999999.9 ) THEN
1118	averaging_interval_pr = averaging_interval
1119	ENDIF
1120
1121	IF ( averaging_interval_pr > dt_dopr ) THEN
1122	IF ( myid == 0 ) THEN
1123	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1124	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1125	ENDIF
1126	CALL local_stop
1127	ENDIF
1128
1129	IF ( averaging_interval_sp == 9999999.9 ) THEN
1130	averaging_interval_sp = averaging_interval
1131	ENDIF
1132
1133	IF ( averaging_interval_sp > dt_dosp ) THEN
1134	IF ( myid == 0 ) THEN
1135	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1136	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1137	ENDIF
1138	CALL local_stop
1139	ENDIF
1140
1141	!
1142	!-- Set the default interval for profiles entering the temporal average
1143	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1144	dt_averaging_input_pr = dt_averaging_input
1145	ENDIF
1146
1147	!
1148	!-- Set the default interval for the output of timeseries to a reasonable
1149	!-- value (tries to minimize the number of calls of flow_statistics)
1150	IF ( dt_dots == 9999999.9 ) THEN
1151	IF ( averaging_interval_pr == 0.0 ) THEN
1152	dt_dots = MIN( dt_run_control, dt_dopr )
1153	ELSE
1154	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1155	ENDIF
1156	ENDIF
1157
1158	!
1159	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1160	IF ( dt_averaging_input > averaging_interval ) THEN
1161	IF ( myid == 0 ) THEN
1162	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1163	dt_averaging_input, ' must be <= averaging_interval=', &
1164	averaging_interval
1165	ENDIF
1166	CALL local_stop
1167	ENDIF
1168
1169	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1170	IF ( myid == 0 ) THEN
1171	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1172	dt_averaging_input_pr, &
1173	' must be <= averaging_interval_pr=', &
1174	averaging_interval_pr
1175	ENDIF
1176	CALL local_stop
1177	ENDIF
1178
1179	!
1180	!-- Set the default value for the integration interval of precipitation amount
1181	IF ( precipitation ) THEN
1182	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1183	precipitation_amount_interval = dt_do2d_xy
1184	ELSE
1185	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1186	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1187	'precipitation_amount_interval =', &
1188	precipitation_amount_interval, &
1189	' must not be larger than dt_do2d_xy', &
1190	' = ', dt_do2d_xy
1191	CALL local_stop
1192	ENDIF
1193	ENDIF
1194	ENDIF
1195
1196	!
1197	!-- Determine the number of output profiles and check whether they are
1198	!-- permissible
1199	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1200
1201	dopr_n = dopr_n + 1
1202	i = dopr_n
1203
1204	!
1205	!-- Determine internal profile number (for hom, homs)
1206	!-- and store height levels
1207	SELECT CASE ( TRIM( data_output_pr(i) ) )
1208
1209	CASE ( 'u', '#u' )
1210	dopr_index(i) = 1
1211	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1212	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1213	dopr_initial_index(i) = 5
1214	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1215	data_output_pr(i) = data_output_pr(i)(2:)
1216	ENDIF
1217
1218	CASE ( 'v', '#v' )
1219	dopr_index(i) = 2
1220	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1221	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1222	dopr_initial_index(i) = 6
1223	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1224	data_output_pr(i) = data_output_pr(i)(2:)
1225	ENDIF
1226
1227	CASE ( 'w' )
1228	dopr_index(i) = 3
1229	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1230
1231	CASE ( 'pt', '#pt' )
1232	IF ( .NOT. cloud_physics ) THEN
1233	dopr_index(i) = 4
1234	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1235	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1236	dopr_initial_index(i) = 7
1237	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1238	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1239	data_output_pr(i) = data_output_pr(i)(2:)
1240	ENDIF
1241	ELSE
1242	dopr_index(i) = 43
1243	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1244	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1245	dopr_initial_index(i) = 28
1246	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1247	hom(nzb,2,28,:) = 0.0 ! weil zu(nzb) negativ ist
1248	data_output_pr(i) = data_output_pr(i)(2:)
1249	ENDIF
1250	ENDIF
1251
1252	CASE ( 'e' )
1253	dopr_index(i) = 8
1254	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1255	hom(nzb,2,8,:) = 0.0
1256
1257	CASE ( 'km', '#km' )
1258	dopr_index(i) = 9
1259	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1260	hom(nzb,2,9,:) = 0.0
1261	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1262	dopr_initial_index(i) = 23
1263	hom(:,2,23,:) = hom(:,2,9,:)
1264	data_output_pr(i) = data_output_pr(i)(2:)
1265	ENDIF
1266
1267	CASE ( 'kh', '#kh' )
1268	dopr_index(i) = 10
1269	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1270	hom(nzb,2,10,:) = 0.0
1271	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1272	dopr_initial_index(i) = 24
1273	hom(:,2,24,:) = hom(:,2,10,:)
1274	data_output_pr(i) = data_output_pr(i)(2:)
1275	ENDIF
1276
1277	CASE ( 'l', '#l' )
1278	dopr_index(i) = 11
1279	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1280	hom(nzb,2,11,:) = 0.0
1281	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1282	dopr_initial_index(i) = 25
1283	hom(:,2,25,:) = hom(:,2,11,:)
1284	data_output_pr(i) = data_output_pr(i)(2:)
1285	ENDIF
1286
1287	CASE ( 'w"u"' )
1288	dopr_index(i) = 12
1289	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1290	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1291
1292	CASE ( 'wu' )
1293	dopr_index(i) = 13
1294	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1295
1296	CASE ( 'w"v"' )
1297	dopr_index(i) = 14
1298	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1299	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1300
1301	CASE ( 'wv' )
1302	dopr_index(i) = 15
1303	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1304
1305	CASE ( 'w"pt"' )
1306	dopr_index(i) = 16
1307	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1308
1309	CASE ( 'wpt' )
1310	dopr_index(i) = 17
1311	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1312
1313	CASE ( 'wpt' )
1314	dopr_index(i) = 18
1315	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1316
1317	CASE ( 'wu' )
1318	dopr_index(i) = 19
1319	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1320	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1321
1322	CASE ( 'wv' )
1323	dopr_index(i) = 20
1324	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1325	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1326
1327	CASE ( 'wptBC' )
1328	dopr_index(i) = 21
1329	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1330
1331	CASE ( 'wptBC' )
1332	dopr_index(i) = 22
1333	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1334
1335	CASE ( 'u*2' )
1336	dopr_index(i) = 30
1337	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1338
1339	CASE ( 'v*2' )
1340	dopr_index(i) = 31
1341	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1342
1343	CASE ( 'w*2' )
1344	dopr_index(i) = 32
1345	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1346
1347	CASE ( 'pt*2' )
1348	dopr_index(i) = 33
1349	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1350
1351	CASE ( 'e*' )
1352	dopr_index(i) = 34
1353	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1354
1355	CASE ( 'w2pt' )
1356	dopr_index(i) = 35
1357	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1358
1359	CASE ( 'wpt2' )
1360	dopr_index(i) = 36
1361	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1362
1363	CASE ( 'we' )
1364	dopr_index(i) = 37
1365	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1366
1367	CASE ( 'w*3' )
1368	dopr_index(i) = 38
1369	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1370
1371	CASE ( 'Sw' )
1372	dopr_index(i) = 39
1373	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1374
1375	CASE ( 'q', '#q' )
1376	IF ( .NOT. cloud_physics ) THEN
1377	IF ( myid == 0 ) THEN
1378	PRINT*, '+++ check_parameters: data_output_pr = ', &
1379	data_output_pr(i), &
1380	' is not implemented for cloud_physics = FALSE'
1381	ENDIF
1382	CALL local_stop
1383	ELSE
1384	dopr_index(i) = 41
1385	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1386	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1387	dopr_initial_index(i) = 26
1388	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1389	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1390	data_output_pr(i) = data_output_pr(i)(2:)
1391	ENDIF
1392	ENDIF
1393
1394	CASE ( 's', '#s' )
1395	IF ( .NOT. passive_scalar ) THEN
1396	IF ( myid == 0 ) THEN
1397	PRINT*, '+++ check_parameters: data_output_pr = ', &
1398	data_output_pr(i), &
1399	' is not implemented for passive_scalar = FALSE'
1400	ENDIF
1401	CALL local_stop
1402	ELSE
1403	dopr_index(i) = 41
1404	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1405	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1406	dopr_initial_index(i) = 26
1407	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1408	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1409	data_output_pr(i) = data_output_pr(i)(2:)
1410	ENDIF
1411	ENDIF
1412
1413	CASE ( 'qv', '#qv' )
1414	IF ( .NOT. cloud_physics ) THEN
1415	dopr_index(i) = 41
1416	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1417	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1418	dopr_initial_index(i) = 26
1419	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1420	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1421	data_output_pr(i) = data_output_pr(i)(2:)
1422	ENDIF
1423	ELSE
1424	dopr_index(i) = 42
1425	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1426	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1427	dopr_initial_index(i) = 27
1428	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1429	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1430	data_output_pr(i) = data_output_pr(i)(2:)
1431	ENDIF
1432	ENDIF
1433
1434	CASE ( 'lpt', '#lpt' )
1435	IF ( .NOT. cloud_physics ) THEN
1436	IF ( myid == 0 ) THEN
1437	PRINT*, '+++ check_parameters: data_output_pr = ', &
1438	data_output_pr(i), &
1439	' is not implemented for cloud_physics = FALSE'
1440	ENDIF
1441	CALL local_stop
1442	ELSE
1443	dopr_index(i) = 4
1444	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1445	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1446	dopr_initial_index(i) = 7
1447	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1448	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1449	data_output_pr(i) = data_output_pr(i)(2:)
1450	ENDIF
1451	ENDIF
1452
1453	CASE ( 'vpt', '#vpt' )
1454	dopr_index(i) = 44
1455	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1456	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1457	dopr_initial_index(i) = 29
1458	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1459	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1460	data_output_pr(i) = data_output_pr(i)(2:)
1461	ENDIF
1462
1463	CASE ( 'w"vpt"' )
1464	dopr_index(i) = 45
1465	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1466
1467	CASE ( 'wvpt' )
1468	dopr_index(i) = 46
1469	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1470
1471	CASE ( 'wvpt' )
1472	dopr_index(i) = 47
1473	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1474
1475	CASE ( 'w"q"' )
1476	IF ( .NOT. cloud_physics ) THEN
1477	IF ( myid == 0 ) THEN
1478	PRINT*, '+++ check_parameters: data_output_pr = ', &
1479	data_output_pr(i), &
1480	' is not implemented for cloud_physics = FALSE'
1481	ENDIF
1482	CALL local_stop
1483	ELSE
1484	dopr_index(i) = 48
1485	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1486	ENDIF
1487
1488	CASE ( 'wq' )
1489	IF ( .NOT. cloud_physics ) THEN
1490	IF ( myid == 0 ) THEN
1491	PRINT*, '+++ check_parameters: data_output_pr = ', &
1492	data_output_pr(i), &
1493	' is not implemented for cloud_physics = FALSE'
1494	ENDIF
1495	CALL local_stop
1496	ELSE
1497	dopr_index(i) = 49
1498	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1499	ENDIF
1500
1501	CASE ( 'wq' )
1502	IF ( .NOT. cloud_physics ) THEN
1503	IF ( myid == 0 ) THEN
1504	PRINT*, '+++ check_parameters: data_output_pr = ', &
1505	data_output_pr(i), &
1506	' is not implemented for cloud_physics = FALSE'
1507	ENDIF
1508	CALL local_stop
1509	ELSE
1510	dopr_index(i) = 50
1511	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1512	ENDIF
1513
1514	CASE ( 'w"s"' )
1515	IF ( .NOT. passive_scalar ) THEN
1516	IF ( myid == 0 ) THEN
1517	PRINT*, '+++ check_parameters: data_output_pr = ', &
1518	data_output_pr(i), &
1519	' is not implemented for passive_scalar = FALSE'
1520	ENDIF
1521	CALL local_stop
1522	ELSE
1523	dopr_index(i) = 48
1524	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1525	ENDIF
1526
1527	CASE ( 'ws' )
1528	IF ( .NOT. passive_scalar ) THEN
1529	IF ( myid == 0 ) THEN
1530	PRINT*, '+++ check_parameters: data_output_pr = ', &
1531	data_output_pr(i), &
1532	' is not implemented for passive_scalar = FALSE'
1533	ENDIF
1534	CALL local_stop
1535	ELSE
1536	dopr_index(i) = 49
1537	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1538	ENDIF
1539
1540	CASE ( 'ws' )
1541	IF ( .NOT. passive_scalar ) THEN
1542	IF ( myid == 0 ) THEN
1543	PRINT*, '+++ check_parameters: data_output_pr = ', &
1544	data_output_pr(i), &
1545	' is not implemented for passive_scalar = FALSE'
1546	ENDIF
1547	CALL local_stop
1548	ELSE
1549	dopr_index(i) = 50
1550	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1551	ENDIF
1552
1553	CASE ( 'w"qv"' )
1554	IF ( moisture .AND. .NOT. cloud_physics ) &
1555	THEN
1556	dopr_index(i) = 48
1557	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1558	ELSEIF( moisture .AND. cloud_physics ) THEN
1559	dopr_index(i) = 51
1560	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1561	ELSE
1562	IF ( myid == 0 ) THEN
1563	PRINT*, '+++ check_parameters: data_output_pr = ', &
1564	data_output_pr(i), &
1565	' is not implemented for cloud_physics = FALSE', &
1566	' and moisture = FALSE'
1567	ENDIF
1568	CALL local_stop
1569	ENDIF
1570
1571	CASE ( 'wqv' )
1572	IF ( moisture .AND. .NOT. cloud_physics ) &
1573	THEN
1574	dopr_index(i) = 49
1575	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1576	ELSEIF( moisture .AND. cloud_physics ) THEN
1577	dopr_index(i) = 52
1578	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1579	ELSE
1580	IF ( myid == 0 ) THEN
1581	PRINT*, '+++ check_parameters: data_output_pr = ', &
1582	data_output_pr(i), &
1583	' is not implemented for cloud_physics = FALSE', &
1584	' and moisture = FALSE'
1585	ENDIF
1586	CALL local_stop
1587	ENDIF
1588
1589	CASE ( 'wqv' )
1590	IF ( moisture .AND. .NOT. cloud_physics ) &
1591	THEN
1592	dopr_index(i) = 50
1593	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1594	ELSEIF( moisture .AND. cloud_physics ) THEN
1595	dopr_index(i) = 53
1596	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1597	ELSE
1598	IF ( myid == 0 ) THEN
1599	PRINT*, '+++ check_parameters: data_output_pr = ', &
1600	data_output_pr(i), &
1601	' is not implemented for cloud_physics = FALSE', &
1602	' and moisture = FALSE'
1603	ENDIF
1604	CALL local_stop
1605	ENDIF
1606
1607	CASE ( 'ql' )
1608	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1609	IF ( myid == 0 ) THEN
1610	PRINT*, '+++ check_parameters: data_output_pr = ', &
1611	data_output_pr(i), &
1612	' is not implemented for cloud_physics = FALSE'
1613	ENDIF
1614	CALL local_stop
1615	ELSE
1616	dopr_index(i) = 54
1617	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1618	ENDIF
1619
1620	CASE ( 'wuu*/dz' )
1621	dopr_index(i) = 55
1622	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1623
1624	CASE ( 'wp/dz' )
1625	dopr_index(i) = 56
1626	hom(:,2,56,:) = SPREAD( zu, 2, statistic_regions+1 )
1627
1628	CASE ( 'w"e/dz' )
1629	dopr_index(i) = 57
1630	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1631
1632	CASE ( 'u"pt"' )
1633	dopr_index(i) = 58
1634	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1635
1636	CASE ( 'upt' )
1637	dopr_index(i) = 59
1638	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1639
1640	CASE ( 'upt_t' )
1641	dopr_index(i) = 60
1642	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1643
1644	CASE ( 'v"pt"' )
1645	dopr_index(i) = 61
1646	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1647
1648	CASE ( 'vpt' )
1649	dopr_index(i) = 62
1650	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
1651
1652	CASE ( 'vpt_t' )
1653	dopr_index(i) = 63
1654	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
1655
1656
1657	CASE DEFAULT
1658	IF ( myid == 0 ) THEN
1659	PRINT*, '+++ check_parameters: unknown output profile: ', &
1660	'data_output_pr = ', data_output_pr(i)
1661	ENDIF
1662	CALL local_stop
1663
1664	END SELECT
1665	!
1666	!-- Check to which of the predefined coordinate systems the profile belongs
1667	DO k = 1, crmax
1668	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
1669	/=0 ) &
1670	THEN
1671	dopr_crossindex(i) = k
1672	EXIT
1673	ENDIF
1674	ENDDO
1675	!
1676	!-- Generate the text for the labels of the PROFIL output file. "-characters
1677	!-- must be substituted, otherwise PROFIL would interpret them as TeX
1678	!-- control characters
1679	dopr_label(i) = data_output_pr(i)
1680	position = INDEX( dopr_label(i) , '"' )
1681	DO WHILE ( position /= 0 )
1682	dopr_label(i)(position:position) = ''''
1683	position = INDEX( dopr_label(i) , '"' )
1684	ENDDO
1685
1686	ENDDO
1687
1688	!
1689	!-- y-value range of the coordinate system (PROFIL).
1690	!-- x-value range determined in plot_1d.
1691	cross_uymin = 0.0
1692	IF ( z_max_do1d == -1.0 ) THEN
1693	cross_uymax = zu(nzt+1)
1694	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
1695	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
1696	z_max_do1d,' must be >= ', zu(nzb+1), &
1697	' or <= ', zu(nzt+1)
1698	CALL local_stop
1699	ELSE
1700	cross_uymax = z_max_do1d
1701	ENDIF
1702
1703	!
1704	!-- Check whether the chosen normalizing factor for the coordinate systems is
1705	!-- permissible
1706	DO i = 1, crmax
1707	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
1708
1709	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
1710	j = 0
1711
1712	CASE DEFAULT
1713	IF ( myid == 0 ) THEN
1714	PRINT*, '+++ check_parameters: unknown normalize method'
1715	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
1716	ENDIF
1717	CALL local_stop
1718
1719	END SELECT
1720	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
1721
1722	CASE ( '', 'z_i' )
1723	j = 0
1724
1725	CASE DEFAULT
1726	IF ( myid == 0 ) THEN
1727	PRINT*, '+++ check_parameters: unknown normalize method'
1728	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
1729	ENDIF
1730	CALL local_stop
1731
1732	END SELECT
1733	ENDDO
1734	!
1735	!-- Check normalized y-value range of the coordinate system (PROFIL)
1736	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
1737	THEN
1738	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
1739	'd=', z_max_do1d_normalized, ' must be >= 0.0'
1740	CALL local_stop
1741	ENDIF
1742
1743
1744	!
1745	!-- Append user-defined data output variables to the standard data output
1746	IF ( data_output_user(1) /= ' ' ) THEN
1747	i = 1
1748	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1749	i = i + 1
1750	ENDDO
1751	j = 1
1752	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
1753	IF ( i > 100 ) THEN
1754	IF ( myid == 0 ) THEN
1755	PRINT*, '+++ check_parameters: number of output quantitities', &
1756	' given by data_output and data_output_user'
1757	PRINT*, ' exceeds the limit of 100'
1758	ENDIF
1759	CALL local_stop
1760	ENDIF
1761	data_output(i) = data_output_user(j)
1762	i = i + 1
1763	j = j + 1
1764	ENDDO
1765	ENDIF
1766
1767	!
1768	!-- Check and set steering parameters for 2d/3d data output and averaging
1769	i = 1
1770	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1771	!
1772	!-- Check for data averaging
1773	ilen = LEN_TRIM( data_output(i) )
1774	j = 0 ! no data averaging
1775	IF ( ilen > 3 ) THEN
1776	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
1777	j = 1 ! data averaging
1778	data_output(i) = data_output(i)(1:ilen-3)
1779	ENDIF
1780	ENDIF
1781	!
1782	!-- Check for cross section or volume data
1783	ilen = LEN_TRIM( data_output(i) )
1784	k = 0 ! 3d data
1785	var = data_output(i)(1:ilen)
1786	IF ( ilen > 3 ) THEN
1787	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
1788	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
1789	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1790	k = 1 ! 2d data
1791	var = data_output(i)(1:ilen-3)
1792	ENDIF
1793	ENDIF
1794	!
1795	!-- Check for allowed value and set units
1796	SELECT CASE ( TRIM( var ) )
1797
1798	CASE ( 'e' )
1799	IF ( constant_diffusion ) THEN
1800	IF ( myid == 0 ) THEN
1801	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1802	'" requires constant_diffusion = .FALSE.'
1803	ENDIF
1804	CALL local_stop
1805	ENDIF
1806	unit = 'm2/s2'
1807
1808	CASE ( 'pc', 'pr' )
1809	IF ( .NOT. particle_advection ) THEN
1810	IF ( myid == 0 ) THEN
1811	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1812	'" requires particle package'
1813	PRINT*, ' (mrun-option "-p particles")'
1814	ENDIF
1815	CALL local_stop
1816	ENDIF
1817	IF ( TRIM( var ) == 'pc' ) unit = 'number'
1818	IF ( TRIM( var ) == 'pr' ) unit = 'm'
1819
1820	CASE ( 'q', 'vpt' )
1821	IF ( .NOT. moisture ) THEN
1822	IF ( myid == 0 ) THEN
1823	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1824	'" requires moisture = .TRUE.'
1825	ENDIF
1826	CALL local_stop
1827	ENDIF
1828	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
1829	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
1830
1831	CASE ( 'ql' )
1832	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
1833	IF ( myid == 0 ) THEN
1834	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1835	'" requires cloud_physics = .TRUE.'
1836	PRINT*, ' or cloud_droplets = .TRUE.'
1837	ENDIF
1838	CALL local_stop
1839	ENDIF
1840	unit = 'kg/kg'
1841
1842	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
1843	IF ( .NOT. cloud_droplets ) THEN
1844	IF ( myid == 0 ) THEN
1845	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1846	'" requires cloud_droplets = .TRUE.'
1847	ENDIF
1848	CALL local_stop
1849	ENDIF
1850	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
1851	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
1852	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
1853
1854	CASE ( 'qv' )
1855	IF ( .NOT. cloud_physics ) THEN
1856	IF ( myid == 0 ) THEN
1857	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1858	'" requires cloud_physics = .TRUE.'
1859	ENDIF
1860	CALL local_stop
1861	ENDIF
1862	unit = 'kg/kg'
1863
1864	CASE ( 's' )
1865	IF ( .NOT. passive_scalar ) THEN
1866	IF ( myid == 0 ) THEN
1867	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1868	'" requires passive_scalar = .TRUE.'
1869	ENDIF
1870	CALL local_stop
1871	ENDIF
1872	unit = 'conc'
1873
1874	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
1875	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
1876	IF ( myid == 0 ) THEN
1877	PRINT*, '+++ check_parameters: illegal value for data_',&
1878	'output: "', TRIM( var ), '" is only allowed'
1879	PRINT*, ' for horizontal cross section'
1880	ENDIF
1881	CALL local_stop
1882	ENDIF
1883	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
1884	IF ( myid == 0 ) THEN
1885	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1886	'" requires cloud_physics = .TRUE.'
1887	ENDIF
1888	CALL local_stop
1889	ENDIF
1890	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
1891	IF ( myid == 0 ) THEN
1892	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1893	'" requires precipitation = .TRUE.'
1894	ENDIF
1895	CALL local_stop
1896	ENDIF
1897	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
1898	IF ( myid == 0 ) THEN
1899	PRINT*, '+++ check_parameters: temporal averaging of ', &
1900	' precipitation amount "', TRIM( var ), &
1901	'" not possible'
1902	ENDIF
1903	CALL local_stop
1904	ENDIF
1905	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
1906	IF ( myid == 0 ) THEN
1907	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1908	'" requires precipitation = .TRUE.'
1909	ENDIF
1910	CALL local_stop
1911	ENDIF
1912
1913
1914	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
1915	IF ( TRIM( var ) == 't*' ) unit = 'K'
1916	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
1917	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
1918	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
1919	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
1920
1921	CASE ( 'p', 'pt', 'u', 'v', 'w' )
1922	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
1923	IF ( TRIM( var ) == 'pt' ) unit = 'K'
1924	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
1925	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
1926	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
1927	CONTINUE
1928
1929	CASE DEFAULT
1930	CALL user_check_data_output( var, unit )
1931
1932	IF ( unit == 'illegal' ) THEN
1933	IF ( myid == 0 ) THEN
1934	IF ( data_output_user(1) /= ' ' ) THEN
1935	PRINT*, '+++ check_parameters: illegal value for data_',&
1936	'output or data_output_user: "', &
1937	TRIM( data_output(i) ), '"'
1938	ELSE
1939	PRINT*, '+++ check_parameters: illegal value for data_',&
1940	'output: "', TRIM( data_output(i) ), '"'
1941	ENDIF
1942	ENDIF
1943	CALL local_stop
1944	ENDIF
1945
1946	END SELECT
1947	!
1948	!-- Set the internal steering parameters appropriately
1949	IF ( k == 0 ) THEN
1950	do3d_no(j) = do3d_no(j) + 1
1951	do3d(j,do3d_no(j)) = data_output(i)
1952	do3d_unit(j,do3d_no(j)) = unit
1953	ELSE
1954	do2d_no(j) = do2d_no(j) + 1
1955	do2d(j,do2d_no(j)) = data_output(i)
1956	do2d_unit(j,do2d_no(j)) = unit
1957	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
1958	data_output_xy(j) = .TRUE.
1959	ENDIF
1960	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
1961	data_output_xz(j) = .TRUE.
1962	ENDIF
1963	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1964	data_output_yz(j) = .TRUE.
1965	ENDIF
1966	ENDIF
1967
1968	IF ( j == 1 ) THEN
1969	!
1970	!-- Check, if variable is already subject to averaging
1971	found = .FALSE.
1972	DO k = 1, doav_n
1973	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
1974	ENDDO
1975
1976	IF ( .NOT. found ) THEN
1977	doav_n = doav_n + 1
1978	doav(doav_n) = var
1979	ENDIF
1980	ENDIF
1981
1982	i = i + 1
1983	ENDDO
1984
1985	!
1986	!-- Store sectional planes in one shared array
1987	section(:,1) = section_xy
1988	section(:,2) = section_xz
1989	section(:,3) = section_yz
1990
1991	!
1992	!-- Upper plot limit (grid point value) for 1D profiles
1993	IF ( z_max_do1d == -1.0 ) THEN
1994	nz_do1d = nzt+1
1995	ELSE
1996	DO k = nzb+1, nzt+1
1997	nz_do1d = k
1998	IF ( zw(k) > z_max_do1d ) EXIT
1999	ENDDO
2000	ENDIF
2001
2002	!
2003	!-- Upper plot limit for 2D vertical sections
2004	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2005	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2006	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2007	z_max_do2d, ' must be >= ', zu(nzb+1), &
2008	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2009	CALL local_stop
2010	ENDIF
2011
2012	!
2013	!-- Upper plot limit for 3D arrays
2014	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2015
2016	!
2017	!-- Determine and check accuracy for compressed 3D plot output
2018	IF ( do3d_compress ) THEN
2019	!
2020	!-- Compression only permissible on T3E machines
2021	IF ( host(1:3) /= 't3e' ) THEN
2022	IF ( myid == 0 ) THEN
2023	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2024	'ed on host "', TRIM( host ), '"'
2025	ENDIF
2026	CALL local_stop
2027	ENDIF
2028
2029	i = 1
2030	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2031
2032	ilen = LEN_TRIM( do3d_comp_prec(i) )
2033	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2034	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2035	IF ( myid == 0 ) THEN
2036	PRINT*, '+++ check_parameters: illegal precision: ', &
2037	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2038	ENDIF
2039	CALL local_stop
2040	ENDIF
2041
2042	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2043	var = do3d_comp_prec(i)(1:ilen-1)
2044
2045	SELECT CASE ( var )
2046
2047	CASE ( 'u' )
2048	j = 1
2049	CASE ( 'v' )
2050	j = 2
2051	CASE ( 'w' )
2052	j = 3
2053	CASE ( 'p' )
2054	j = 4
2055	CASE ( 'pt' )
2056	j = 5
2057
2058	CASE DEFAULT
2059	IF ( myid == 0 ) THEN
2060	PRINT*, '+++ check_parameters: unknown variable in ', &
2061	'assignment'
2062	PRINT*, ' do3d_comp_prec(', i, ')="', &
2063	TRIM( do3d_comp_prec(i) ),'"'
2064	ENDIF
2065	CALL local_stop
2066
2067	END SELECT
2068
2069	plot_3d_precision(j)%precision = prec
2070	i = i + 1
2071
2072	ENDDO
2073	ENDIF
2074
2075	!
2076	!-- Check the data output format(s)
2077	IF ( data_output_format(1) == ' ' ) THEN
2078	!
2079	!-- Default value
2080	netcdf_output = .TRUE.
2081	ELSE
2082	i = 1
2083	DO WHILE ( data_output_format(i) /= ' ' )
2084
2085	SELECT CASE ( data_output_format(i) )
2086
2087	CASE ( 'netcdf' )
2088	netcdf_output = .TRUE.
2089	CASE ( 'iso2d' )
2090	iso2d_output = .TRUE.
2091	CASE ( 'profil' )
2092	profil_output = .TRUE.
2093	CASE ( 'avs' )
2094	avs_output = .TRUE.
2095
2096	CASE DEFAULT
2097	IF ( myid == 0 ) THEN
2098	PRINT*, '+++ check_parameters:'
2099	PRINT*, ' unknown value for data_output_format "', &
2100	TRIM( data_output_format(i) ),'"'
2101	ENDIF
2102	CALL local_stop
2103
2104	END SELECT
2105
2106	i = i + 1
2107	IF ( i > 10 ) EXIT
2108
2109	ENDDO
2110
2111	ENDIF
2112
2113	!
2114	!-- Check netcdf precison
2115	ldum = .FALSE.
2116	CALL define_netcdf_header( 'ch', ldum, 0 )
2117
2118	!
2119	!-- Check, whether a constant diffusion coefficient shall be used
2120	IF ( km_constant /= -1.0 ) THEN
2121	IF ( km_constant < 0.0 ) THEN
2122	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2123	km_constant, ' < 0.0'
2124	CALL local_stop
2125	ELSE
2126	IF ( prandtl_number < 0.0 ) THEN
2127	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2128	prandtl_number, ' < 0.0'
2129	CALL local_stop
2130	ENDIF
2131	constant_diffusion = .TRUE.
2132
2133	IF ( prandtl_layer ) THEN
2134	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2135	'is not allowed with fixed value of km'
2136	CALL local_stop
2137	ENDIF
2138	ENDIF
2139	ENDIF
2140
2141	!
2142	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2143	!-- for the horizontal diffusivity used within the outflow damping layer,
2144	!-- and check/set the width of the damping layer
2145	IF ( bc_lr /= 'cyclic' ) THEN
2146	IF ( km_damp_max == -1.0 ) THEN
2147	km_damp_max = 0.5 * dx
2148	ENDIF
2149	IF ( outflow_damping_width == -1.0 ) THEN
2150	outflow_damping_width = MIN( 20, nx/2 )
2151	ENDIF
2152	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2153	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2154	'idth out of range'
2155	CALL local_stop
2156	ENDIF
2157	ENDIF
2158
2159	IF ( bc_ns /= 'cyclic' ) THEN
2160	IF ( km_damp_max == -1.0 ) THEN
2161	km_damp_max = 0.5 * dy
2162	ENDIF
2163	IF ( outflow_damping_width == -1.0 ) THEN
2164	outflow_damping_width = MIN( 20, ny/2 )
2165	ENDIF
2166	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2167	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2168	'idth out of range'
2169	CALL local_stop
2170	ENDIF
2171	ENDIF
2172
2173	!
2174	!-- Check value range for rif
2175	IF ( rif_min >= rif_max ) THEN
2176	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2177	' must be less than rif_max=', rif_max
2178	CALL local_stop
2179	ENDIF
2180
2181	!
2182	!-- Determine upper and lower hight level indices for random perturbations
2183	IF ( disturbance_level_b == -1.0 ) THEN
2184	disturbance_level_b = zu(nzb+3)
2185	disturbance_level_ind_b = nzb + 3
2186	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2187	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2188	disturbance_level_b, ' must be >= ',zu(3), &
2189	'(zu(3))'
2190	CALL local_stop
2191	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2192	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2193	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2194	'(zu(nzt-2))'
2195	CALL local_stop
2196	ELSE
2197	DO k = 3, nzt-2
2198	IF ( disturbance_level_b <= zu(k) ) THEN
2199	disturbance_level_ind_b = k
2200	EXIT
2201	ENDIF
2202	ENDDO
2203	ENDIF
2204
2205	IF ( disturbance_level_t == -1.0 ) THEN
2206	disturbance_level_t = zu(nzt/3)
2207	disturbance_level_ind_t = nzt / 3
2208	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2209	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2210	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2211	'(zu(nzt-2))'
2212	CALL local_stop
2213	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2214	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2215	disturbance_level_t, ' must be >= ', &
2216	'disturbance_level_b=', disturbance_level_b
2217	CALL local_stop
2218	ELSE
2219	DO k = 3, nzt-2
2220	IF ( disturbance_level_t <= zu(k) ) THEN
2221	disturbance_level_ind_t = k
2222	EXIT
2223	ENDIF
2224	ENDDO
2225	ENDIF
2226
2227	!
2228	!-- Check again whether the levels determined this way are ok.
2229	!-- Error may occur at automatic determination and too few grid points in
2230	!-- z-direction.
2231	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2232	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2233	'disturbance_level_ind_t=', &
2234	disturbance_level_ind_t, ' must be >= ', &
2235	'disturbance_level_ind_b=', &
2236	disturbance_level_ind_b
2237	CALL local_stop
2238	ENDIF
2239
2240	!
2241	!-- Determine the horizontal index range for random perturbations.
2242	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2243	!-- near the inflow and the perturbation area is further limited to ...(1)
2244	!-- after the initial phase of the flow.
2245	dist_nxl = 0; dist_nxr = nx
2246	dist_nys = 0; dist_nyn = ny
2247	IF ( bc_lr /= 'cyclic' ) THEN
2248	IF ( inflow_disturbance_begin == -1 ) THEN
2249	inflow_disturbance_begin = MIN( 10, nx/2 )
2250	ENDIF
2251	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2252	THEN
2253	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2254	'_begin out of range'
2255	CALL local_stop
2256	ENDIF
2257	IF ( inflow_disturbance_end == -1 ) THEN
2258	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2259	ENDIF
2260	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2261	THEN
2262	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2263	'_end out of range'
2264	CALL local_stop
2265	ENDIF
2266	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2267	IF ( inflow_disturbance_begin == -1 ) THEN
2268	inflow_disturbance_begin = MIN( 10, ny/2 )
2269	ENDIF
2270	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2271	THEN
2272	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2273	'_begin out of range'
2274	CALL local_stop
2275	ENDIF
2276	IF ( inflow_disturbance_end == -1 ) THEN
2277	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2278	ENDIF
2279	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2280	THEN
2281	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2282	'_end out of range'
2283	CALL local_stop
2284	ENDIF
2285	ENDIF
2286
2287	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2288	dist_nxr = nx - inflow_disturbance_begin
2289	dist_nxl(1) = nx - inflow_disturbance_end
2290	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2291	dist_nxl = inflow_disturbance_begin
2292	dist_nxr(1) = inflow_disturbance_end
2293	ENDIF
2294	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2295	dist_nyn = ny - inflow_disturbance_begin
2296	dist_nys(1) = ny - inflow_disturbance_end
2297	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2298	dist_nys = inflow_disturbance_begin
2299	dist_nyn(1) = inflow_disturbance_end
2300	ENDIF
2301
2302	!
2303	!-- Check random generator
2304	IF ( random_generator /= 'system-specific' .AND. &
2305	random_generator /= 'numerical-recipes' ) THEN
2306	IF ( myid == 0 ) THEN
2307	PRINT*, '+++ check_parameters:'
2308	PRINT*, ' unknown random generator: random_generator=', &
2309	random_generator
2310	ENDIF
2311	CALL local_stop
2312	ENDIF
2313
2314	!
2315	!-- Determine damping level index for 1D model
2316	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2317	IF ( damp_level_1d == -1.0 ) THEN
2318	damp_level_1d = zu(nzt+1)
2319	damp_level_ind_1d = nzt + 1
2320	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2321	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2322	damp_level_1d, ' must be > 0.0 and < ', &
2323	'zu(nzt+1)', zu(nzt+1)
2324	CALL local_stop
2325	ELSE
2326	DO k = 1, nzt+1
2327	IF ( damp_level_1d <= zu(k) ) THEN
2328	damp_level_ind_1d = k
2329	EXIT
2330	ENDIF
2331	ENDDO
2332	ENDIF
2333	ENDIF
2334	!
2335	!-- Check some other 1d-model parameters
2336	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2337	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2338	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2339	TRIM( mixing_length_1d ), '" is unknown'
2340	CALL local_stop
2341	ENDIF
2342	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2343	TRIM( dissipation_1d ) /= 'detering' ) THEN
2344	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2345	TRIM( dissipation_1d ), '" is unknown'
2346	CALL local_stop
2347	ENDIF
2348
2349	!
2350	!-- Set time for the next user defined restart (time_restart is the
2351	!-- internal parameter for steering restart events)
2352	IF ( restart_time /= 9999999.9 ) THEN
2353	IF ( restart_time > simulated_time ) time_restart = restart_time
2354	ELSE
2355	!
2356	!-- In case of a restart run, set internal parameter to default (no restart)
2357	!-- if the NAMELIST-parameter restart_time is omitted
2358	time_restart = 9999999.9
2359	ENDIF
2360
2361	!
2362	!-- Set default value of the time needed to terminate a model run
2363	IF ( termination_time_needed == -1.0 ) THEN
2364	IF ( host(1:3) == 'ibm' ) THEN
2365	termination_time_needed = 300.0
2366	ELSE
2367	termination_time_needed = 35.0
2368	ENDIF
2369	ENDIF
2370
2371	!
2372	!-- Check the time needed to terminate a model run
2373	IF ( host(1:3) == 't3e' ) THEN
2374	!
2375	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2376	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2377	IF ( termination_time_needed <= 30.0 ) THEN
2378	IF ( myid == 0 ) THEN
2379	PRINT*, '+++ check_parameters: termination_time_needed', &
2380	termination_time_needed
2381	PRINT*, ' must be > 30.0 on host "', host, &
2382	'"'
2383	ENDIF
2384	CALL local_stop
2385	ENDIF
2386	ELSEIF ( host(1:3) == 'ibm' ) THEN
2387	!
2388	!-- On IBM-regatta machines the time should be at least 300 seconds,
2389	!-- because the job time consumed before executing palm (for compiling,
2390	!-- copying of files, etc.) has to be regarded
2391	IF ( termination_time_needed < 300.0 ) THEN
2392	IF ( myid == 0 ) THEN
2393	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
2394	'needed', termination_time_needed
2395	PRINT*, ' should be >= 300.0', &
2396	' on host "', host, '"'
2397	ENDIF
2398	ENDIF
2399	ENDIF
2400
2401
2402	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |