Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 331

Last change on this file since 331 was 328, checked in by letzel, 15 years ago
initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now independent of turbulent_inflow (check_parameters, header, init_3d_model)
Property svn:keywords set to `Id`
File size: 117.5 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[328]	6	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	7	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	8	! Coupling with independent precursor runs.
[264]	9	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	10	! Bugfix: pressure included for profile output
[240]	11	! Check pressure gradient conditions
[256]	12	! topography_grid_convention moved from user_check_parameters
	13	! 'single_street_canyon'
[226]	14	!
	15	! Former revisions:
	16	! -----------------
	17	! $Id: check_parameters.f90 328 2009-05-28 12:13:56Z raasch $
	18	!
	19	! 222 2009-01-12 16:04:16Z letzel
[217]	20	! +user_check_parameters
[213]	21	! Output of messages replaced by message handling routine.
[206]	22	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	23	! deleted __mpi2 directives
[222]	24	! Check that PALM is called with mrun -K parallel for coupling
[198]	25	!
	26	! 197 2008-09-16 15:29:03Z raasch
[177]	27	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	28	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	29	!
	30	! Strict grid matching along z is not needed for mg-solver.
[153]	31	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	32	! Case of reading data for recycling included in initializing_actions,
[197]	33	! check of turbulent_inflow and calculation of recycling_plane.
	34	! q*2 profile added
[139]	35	!
	36	! 138 2007-11-28 10:03:58Z letzel
[138]	37	! Plant canopy added
[132]	38	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	39	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	40	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	41	!
	42	! 109 2007-08-28 15:26:47Z letzel
[102]	43	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	44	! conditions for temperature and fluxes) in case of coupled runs.
	45	! +profiles for wp and w"e
[104]	46	! Bugfix: Error message concerning output of particle concentration (pc)
	47	! modified
[108]	48	! More checks and more default values for coupled runs
	49	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	50	! cloud_physics = .T.)
	51	! Rayleigh damping for ocean fixed.
[109]	52	! Check and, if necessary, set default value for dt_coupling
[98]	53	!
	54	! 97 2007-06-21 08:23:15Z raasch
[97]	55	! Initial salinity profile is calculated, salinity boundary conditions are
	56	! checked,
[94]	57	! z_max_do1d is checked only in case of ocean = .f.,
[97]	58	! +initial temperature and geostrophic velocity profiles for the ocean version,
	59	! use_pt_reference renamed use_reference
[77]	60	!
[90]	61	! 89 2007-05-25 12:08:31Z raasch
	62	! Check for user-defined profiles
	63	!
[77]	64	! 75 2007-03-22 09:54:05Z raasch
[51]	65	! "by_user" allowed as initializing action, -data_output_ts,
[63]	66	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	67	! and pt_reference are checked, moisture renamed humidity,
[72]	68	! output of precipitation amount/rate and roughnes length + check
[73]	69	! possible negative humidities are avoided in initial profile,
[75]	70	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	71	! revision added to run_description_header
[1]	72	!
[39]	73	! 20 2007-02-26 00:12:32Z raasch
	74	! Temperature and humidity gradients at top are now calculated for nzt+1,
	75	! top_heatflux and respective boundary condition bc_pt_t is checked
	76	!
[3]	77	! RCS Log replace by Id keyword, revision history cleaned up
	78	!
[1]	79	! Revision 1.61 2006/08/04 14:20:25 raasch
	80	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	81	! use_upstream_for_tke, default value for dt_dopts,
	82	! generation of file header moved from routines palm and header to here
	83	!
	84	! Revision 1.1 1997/08/26 06:29:23 raasch
	85	! Initial revision
	86	!
	87	!
	88	! Description:
	89	! ------------
	90	! Check control parameters and deduce further quantities.
	91	!------------------------------------------------------------------------------!
	92
	93	USE arrays_3d
	94	USE constants
	95	USE control_parameters
[264]	96	USE dvrp_variables
[1]	97	USE grid_variables
	98	USE indices
	99	USE model_1d
	100	USE netcdf_control
	101	USE particle_attributes
	102	USE pegrid
	103	USE profil_parameter
	104	USE statistics
	105	USE transpose_indices
	106
	107	IMPLICIT NONE
	108
	109	CHARACTER (LEN=1) :: sq
	110	CHARACTER (LEN=6) :: var
	111	CHARACTER (LEN=7) :: unit
	112	CHARACTER (LEN=8) :: date
	113	CHARACTER (LEN=10) :: time
[102]	114	CHARACTER (LEN=40) :: coupling_string
[1]	115	CHARACTER (LEN=100) :: action
	116
[108]	117	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	118	position, prec
[1]	119	LOGICAL :: found, ldum
[291]	120	REAL :: gradient, maxn, maxp, remote = 0.0, &
	121	simulation_time_since_reference
[1]	122
	123	!
	124	!-- Warning, if host is not set
	125	IF ( host(1:1) == ' ' ) THEN
[213]	126	message_string = '"host" is not set. Please check that environment ' // &
	127	'variable "localhost" & is set before running PALM'
[226]	128	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	129	ENDIF
	130
	131	!
[102]	132	!-- Check the coupling mode
	133	IF ( coupling_mode /= 'uncoupled' .AND. &
	134	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	135	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	136	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	137	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	138	ENDIF
	139
	140	!
[108]	141	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	142	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	143
[108]	144	IF ( dt_coupling == 9999999.9 ) THEN
[213]	145	message_string = 'dt_coupling is not set but required for coup' // &
	146	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	147	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	148	ENDIF
[213]	149
[206]	150	#if defined( __parallel )
	151	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	152	ierr )
	153	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	154	status, ierr )
[108]	155	IF ( dt_coupling /= remote ) THEN
[213]	156	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	157	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	158	'dt_coupling_remote = ', remote
[226]	159	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	160	ENDIF
[109]	161	IF ( dt_coupling <= 0.0 ) THEN
[206]	162	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	163	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	164	status, ierr )
[109]	165	dt_coupling = MAX( dt_max, remote )
[213]	166	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	167	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	168	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	169	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	170	ENDIF
[213]	171
[206]	172	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	173	ierr )
	174	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	175	status, ierr )
[108]	176	IF ( restart_time /= remote ) THEN
[213]	177	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	178	'": restart_time = ', restart_time, '& is not equal to ', &
	179	'restart_time_remote = ', remote
[226]	180	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	181	ENDIF
[213]	182
[206]	183	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	184	ierr )
	185	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	186	status, ierr )
[108]	187	IF ( dt_restart /= remote ) THEN
[213]	188	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	189	'": dt_restart = ', dt_restart, '& is not equal to ', &
	190	'dt_restart_remote = ', remote
[226]	191	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	192	ENDIF
[213]	193
[291]	194	simulation_time_since_reference = end_time - coupling_start_time
	195	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	196	14, comm_inter, ierr )
[206]	197	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	198	status, ierr )
[291]	199	IF ( simulation_time_since_reference /= remote ) THEN
[213]	200	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	201	'": simulation_time_since_reference = ', &
	202	simulation_time_since_reference, '& is not equal to ', &
	203	'simulation_time_since_reference_remote = ', remote
[226]	204	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	205	ENDIF
[213]	206
[206]	207	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	208	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	209	status, ierr )
[108]	210	IF ( dx /= remote ) THEN
[213]	211	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	212	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	213	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	214	ENDIF
[213]	215
[206]	216	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	217	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	218	status, ierr )
[108]	219	IF ( dy /= remote ) THEN
[213]	220	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	221	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	222	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	223	ENDIF
[213]	224
[206]	225	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	227	status, ierr )
[108]	228	IF ( nx /= iremote ) THEN
[213]	229	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	230	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	231	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	232	ENDIF
[213]	233
[206]	234	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	235	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	236	status, ierr )
[108]	237	IF ( ny /= iremote ) THEN
[213]	238	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	239	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	240	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	241	ENDIF
[222]	242	#else
	243	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	244	' ''mrun -K parallel'''
[226]	245	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	246	#endif
	247	ENDIF
	248
[206]	249	#if defined( __parallel )
[108]	250	!
	251	!-- Exchange via intercommunicator
	252	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	253	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	254	ierr )
[108]	255	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	256	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	257	comm_inter, status, ierr )
[108]	258	ENDIF
	259	#endif
	260
	261
	262	!
[1]	263	!-- Generate the file header which is used as a header for most of PALM's
	264	!-- output files
	265	CALL DATE_AND_TIME( date, time )
	266	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	267	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	268	IF ( coupling_mode == 'uncoupled' ) THEN
	269	coupling_string = ''
	270	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	271	coupling_string = ' coupled (atmosphere)'
	272	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	273	coupling_string = ' coupled (ocean)'
	274	ENDIF
[1]	275
[102]	276	WRITE ( run_description_header, &
	277	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	278	TRIM( version ), TRIM( revision ), 'run: ', &
	279	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	280	'host: ', TRIM( host ), run_date, run_time
[1]	281
	282	!
[63]	283	!-- Check the general loop optimization method
	284	IF ( loop_optimization == 'default' ) THEN
	285	IF ( host(1:3) == 'nec' ) THEN
	286	loop_optimization = 'vector'
	287	ELSE
	288	loop_optimization = 'cache'
	289	ENDIF
	290	ENDIF
	291	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	292	.AND. loop_optimization /= 'vector' ) THEN
[213]	293	message_string = 'illegal value given for loop_optimization: "' // &
	294	TRIM( loop_optimization ) // '"'
[226]	295	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	296	ENDIF
	297
	298	!
[1]	299	!-- Check topography setting (check for illegal parameter combinations)
	300	IF ( topography /= 'flat' ) THEN
	301	action = ' '
	302	IF ( scalar_advec /= 'pw-scheme' ) THEN
	303	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	304	ENDIF
	305	IF ( momentum_advec /= 'pw-scheme' ) THEN
	306	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	307	ENDIF
[51]	308	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	309	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	310	ENDIF
[114]	311	IF ( psolver == 'sor' ) THEN
[1]	312	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	313	ENDIF
	314	IF ( sloping_surface ) THEN
	315	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	316	ENDIF
	317	IF ( galilei_transformation ) THEN
	318	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	319	ENDIF
	320	IF ( cloud_physics ) THEN
	321	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	322	ENDIF
	323	IF ( cloud_droplets ) THEN
	324	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	325	ENDIF
[75]	326	IF ( humidity ) THEN
	327	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	328	ENDIF
	329	IF ( .NOT. prandtl_layer ) THEN
	330	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	331	ENDIF
	332	IF ( action /= ' ' ) THEN
[213]	333	message_string = 'a non-flat topography does not allow ' // &
	334	TRIM( action )
[226]	335	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	336	ENDIF
[256]	337	!
	338	!-- In case of non-flat topography, check whether the convention how to
	339	!-- define the topography grid has been set correctly, or whether the default
	340	!-- is applicable. If this is not possible, abort.
	341	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	342	IF ( TRIM( topography ) /= 'single_building' .AND. &
	343	TRIM( topography ) /= 'single_street_canyon' .AND. &
	344	TRIM( topography ) /= 'read_from_file' ) THEN
	345	!-- The default value is not applicable here, because it is only valid
	346	!-- for the two standard cases 'single_building' and 'read_from_file'
	347	!-- defined in init_grid.
	348	WRITE( message_string, * ) &
	349	'The value for "topography_grid_convention" ', &
	350	'is not set. Its default value is & only valid for ', &
	351	'"topography" = ''single_building'', ', &
	352	'''single_street_canyon'' & or ''read_from_file''.', &
	353	' & Choose ''cell_edge'' or ''cell_center''.'
	354	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	355	ELSE
	356	!-- The default value is applicable here.
	357	!-- Set convention according to topography.
	358	IF ( TRIM( topography ) == 'single_building' .OR. &
	359	TRIM( topography ) == 'single_street_canyon' ) THEN
	360	topography_grid_convention = 'cell_edge'
	361	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	362	topography_grid_convention = 'cell_center'
	363	ENDIF
	364	ENDIF
	365	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	366	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	367	WRITE( message_string, * ) &
	368	'The value for "topography_grid_convention" is ', &
	369	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	370	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	371	ENDIF
	372
[1]	373	ENDIF
[94]	374
[1]	375	!
[94]	376	!-- Check ocean setting
	377	IF ( ocean ) THEN
	378	action = ' '
	379	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	380	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	381	ENDIF
[97]	382	IF ( momentum_advec == 'ups-scheme' ) THEN
	383	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	384	ENDIF
[94]	385	IF ( action /= ' ' ) THEN
[213]	386	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	387	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	388	ENDIF
	389	ENDIF
	390
	391	!
[291]	392	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	393	!-- ocean run (this setting is done via mrun-option -y)
	394	IF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	395	TRIM( coupling_char ) == '_O' ) THEN
	396	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	397	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	398	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
	399	ENDIF
	400
	401	!
[1]	402	!-- Check whether there are any illegal values
	403	!-- Pressure solver:
	404	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	405	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	406	message_string = 'unknown solver for perturbation pressure: psolver' // &
	407	' = "' // TRIM( psolver ) // '"'
[226]	408	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	409	ENDIF
	410
	411	#if defined( __parallel )
	412	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	413	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	414	'for a 1d domain-decomposition along x & please do' // &
	415	' not set npey/=1 in the parameter file'
[226]	416	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	417	ENDIF
[181]	418	IF ( psolver == 'poisfft_hybrid' .AND. &
	419	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	420	psolver == 'multigrid' .AND. &
	421	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	422	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	423	'work for subdomains with unequal size & please ' // &
	424	'set grid_matching = ''strict'' in the parameter file'
[226]	425	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	426	ENDIF
	427	#else
	428	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	429	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	430	' for a parallel environment'
[226]	431	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	432	ENDIF
	433	#endif
	434
	435	IF ( psolver == 'multigrid' ) THEN
	436	IF ( cycle_mg == 'w' ) THEN
	437	gamma_mg = 2
	438	ELSEIF ( cycle_mg == 'v' ) THEN
	439	gamma_mg = 1
	440	ELSE
[213]	441	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	442	TRIM( cycle_mg ) // '"'
[226]	443	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	444	ENDIF
	445	ENDIF
	446
	447	IF ( fft_method /= 'singleton-algorithm' .AND. &
	448	fft_method /= 'temperton-algorithm' .AND. &
	449	fft_method /= 'system-specific' ) THEN
[213]	450	message_string = 'unknown fft-algorithm: fft_method = "' // &
	451	TRIM( fft_method ) // '"'
[226]	452	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	453	ENDIF
	454
	455	!
	456	!-- Advection schemes:
	457	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	458	THEN
[214]	459	message_string = 'unknown advection scheme: momentum_advec = "' // &
	460	TRIM( momentum_advec ) // '"'
[226]	461	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	462	ENDIF
	463	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	464	.AND. timestep_scheme /= 'euler' ) THEN
[214]	465	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	466	'" is not allowed with timestep_scheme = "' // &
	467	TRIM( timestep_scheme ) // '"'
[226]	468	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	469	ENDIF
	470
	471	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	472	scalar_advec /= 'ups-scheme' ) THEN
[214]	473	message_string = 'unknown advection scheme: scalar_advec = "' // &
	474	TRIM( scalar_advec ) // '"'
[226]	475	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	476	ENDIF
	477
	478	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	479	use_upstream_for_tke = .TRUE.
[214]	480	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	481	'use_sgs_for_particles = .TRUE.'
[226]	482	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	483	ENDIF
	484
	485	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	486	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	487	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	488	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	489	ENDIF
	490
	491	!
	492	!-- Timestep schemes:
	493	SELECT CASE ( TRIM( timestep_scheme ) )
	494
	495	CASE ( 'euler' )
	496	intermediate_timestep_count_max = 1
	497	asselin_filter_factor = 0.0
	498
	499	CASE ( 'leapfrog', 'leapfrog+euler' )
	500	intermediate_timestep_count_max = 1
	501
	502	CASE ( 'runge-kutta-2' )
	503	intermediate_timestep_count_max = 2
	504	asselin_filter_factor = 0.0
	505
	506	CASE ( 'runge-kutta-3' )
	507	intermediate_timestep_count_max = 3
	508	asselin_filter_factor = 0.0
	509
	510	CASE DEFAULT
[214]	511	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	512	TRIM( timestep_scheme ) // '"'
[226]	513	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	514
	515	END SELECT
	516
[63]	517	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	518	THEN
[214]	519	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	520	'" & does not work with timestep_scheme "' // &
	521	TRIM( timestep_scheme ) // '"'
[226]	522	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	523	ENDIF
	524
	525	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	526	THEN
[214]	527	message_string = 'momentum advection scheme "' // &
	528	TRIM( momentum_advec ) // '" & does not work with ' // &
	529	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	530	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	531	ENDIF
	532
[147]	533	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	534	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	535	!
[214]	536	!-- No restart run: several initialising actions are possible
[1]	537	action = initializing_actions
	538	DO WHILE ( TRIM( action ) /= '' )
	539	position = INDEX( action, ' ' )
	540	SELECT CASE ( action(1:position-1) )
	541
	542	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	543	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	544	action = action(position+1:)
	545
	546	CASE DEFAULT
[214]	547	message_string = 'initializing_action = "' // &
	548	TRIM( action ) // '" unkown or not allowed'
[226]	549	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	550
	551	END SELECT
	552	ENDDO
	553	ENDIF
[214]	554
[1]	555	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	556	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	557	message_string = 'initializing_actions = "set_constant_profiles"' // &
	558	' and "set_1d-model_profiles" are not allowed ' // &
	559	'simultaneously'
[226]	560	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	561	ENDIF
[214]	562
[46]	563	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	564	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	565	message_string = 'initializing_actions = "set_constant_profiles"' // &
	566	' and "by_user" are not allowed simultaneously'
[226]	567	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	568	ENDIF
[214]	569
[46]	570	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	571	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	572	message_string = 'initializing_actions = "by_user" and ' // &
	573	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	574	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	575	ENDIF
[1]	576
[75]	577	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	578	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	579	'not allowed with humidity = ', humidity
[226]	580	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	581	ENDIF
	582
[72]	583	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	584	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	585	'not allowed with cloud_physics = ', cloud_physics
[226]	586	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	587	ENDIF
	588
[75]	589	IF ( humidity .AND. sloping_surface ) THEN
[214]	590	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	591	'are not allowed simultaneously'
[226]	592	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	593	ENDIF
	594
[75]	595	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	596	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	597	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	598	ENDIF
	599
[75]	600	IF ( passive_scalar .AND. humidity ) THEN
[214]	601	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	602	'is not allowed simultaneously'
[226]	603	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	604	ENDIF
	605
	606	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	607	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	608	' = .TRUE.'
[226]	609	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	610	ENDIF
	611
	612	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	613	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	614	'" found for parameter grid_matching'
[226]	615	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	616	ENDIF
	617
[138]	618	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	619	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	620	'coefficient & given value is drag_coefficient = 0.0'
[226]	621	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	622	ENDIF
	623
[1]	624	!
	625	!-- In case of no model continuation run, check initialising parameters and
	626	!-- deduce further quantities
	627	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	628
	629	!
	630	!-- Initial profiles for 1D and 3D model, respectively
	631	u_init = ug_surface
	632	v_init = vg_surface
	633	pt_init = pt_surface
[94]	634	IF ( humidity ) q_init = q_surface
	635	IF ( ocean ) sa_init = sa_surface
	636	IF ( passive_scalar ) q_init = s_surface
[138]	637	IF ( plant_canopy ) lad = 0.0
[1]	638
	639	!
	640	!--
	641	!-- If required, compute initial profile of the geostrophic wind
	642	!-- (component ug)
	643	i = 1
	644	gradient = 0.0
[97]	645
	646	IF ( .NOT. ocean ) THEN
	647
	648	ug_vertical_gradient_level_ind(1) = 0
	649	ug(0) = ug_surface
	650	DO k = 1, nzt+1
[177]	651	IF ( i < 11 ) THEN
	652	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	653	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	654	gradient = ug_vertical_gradient(i) / 100.0
	655	ug_vertical_gradient_level_ind(i) = k - 1
	656	i = i + 1
[1]	657	ENDIF
[177]	658	ENDIF
[97]	659	IF ( gradient /= 0.0 ) THEN
	660	IF ( k /= 1 ) THEN
	661	ug(k) = ug(k-1) + dzu(k) * gradient
	662	ELSE
	663	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	664	ENDIF
[1]	665	ELSE
[97]	666	ug(k) = ug(k-1)
[1]	667	ENDIF
[97]	668	ENDDO
[1]	669
[97]	670	ELSE
	671
	672	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	673	ug(nzt+1) = ug_surface
[97]	674	DO k = nzt, 0, -1
[177]	675	IF ( i < 11 ) THEN
	676	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	677	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	678	gradient = ug_vertical_gradient(i) / 100.0
	679	ug_vertical_gradient_level_ind(i) = k + 1
	680	i = i + 1
[97]	681	ENDIF
	682	ENDIF
	683	IF ( gradient /= 0.0 ) THEN
	684	IF ( k /= nzt ) THEN
	685	ug(k) = ug(k+1) - dzu(k+1) * gradient
	686	ELSE
	687	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	688	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	689	ENDIF
	690	ELSE
	691	ug(k) = ug(k+1)
	692	ENDIF
	693	ENDDO
	694
	695	ENDIF
	696
[1]	697	u_init = ug
	698
	699	!
	700	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	701	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	702	ug_vertical_gradient_level(1) = 0.0
	703	ENDIF
	704
	705	!
	706	!--
	707	!-- If required, compute initial profile of the geostrophic wind
	708	!-- (component vg)
	709	i = 1
	710	gradient = 0.0
[97]	711
	712	IF ( .NOT. ocean ) THEN
	713
	714	vg_vertical_gradient_level_ind(1) = 0
	715	vg(0) = vg_surface
	716	DO k = 1, nzt+1
[177]	717	IF ( i < 11 ) THEN
	718	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	719	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	720	gradient = vg_vertical_gradient(i) / 100.0
	721	vg_vertical_gradient_level_ind(i) = k - 1
	722	i = i + 1
[1]	723	ENDIF
	724	ENDIF
[97]	725	IF ( gradient /= 0.0 ) THEN
	726	IF ( k /= 1 ) THEN
	727	vg(k) = vg(k-1) + dzu(k) * gradient
	728	ELSE
	729	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	730	ENDIF
[1]	731	ELSE
[97]	732	vg(k) = vg(k-1)
[1]	733	ENDIF
[97]	734	ENDDO
[1]	735
[97]	736	ELSE
	737
[121]	738	vg_vertical_gradient_level_ind(1) = nzt+1
	739	vg(nzt+1) = vg_surface
[97]	740	DO k = nzt, 0, -1
[177]	741	IF ( i < 11 ) THEN
	742	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	743	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	744	gradient = vg_vertical_gradient(i) / 100.0
	745	vg_vertical_gradient_level_ind(i) = k + 1
	746	i = i + 1
[97]	747	ENDIF
	748	ENDIF
	749	IF ( gradient /= 0.0 ) THEN
	750	IF ( k /= nzt ) THEN
	751	vg(k) = vg(k+1) - dzu(k+1) * gradient
	752	ELSE
	753	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	754	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	755	ENDIF
	756	ELSE
	757	vg(k) = vg(k+1)
	758	ENDIF
	759	ENDDO
	760
	761	ENDIF
	762
[1]	763	v_init = vg
	764
	765	!
	766	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	767	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	768	vg_vertical_gradient_level(1) = 0.0
	769	ENDIF
	770
	771	!
[94]	772	!-- Compute initial temperature profile using the given temperature gradients
[1]	773	i = 1
	774	gradient = 0.0
[94]	775
	776	IF ( .NOT. ocean ) THEN
	777
	778	pt_vertical_gradient_level_ind(1) = 0
	779	DO k = 1, nzt+1
[177]	780	IF ( i < 11 ) THEN
	781	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	782	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	783	gradient = pt_vertical_gradient(i) / 100.0
	784	pt_vertical_gradient_level_ind(i) = k - 1
	785	i = i + 1
[1]	786	ENDIF
	787	ENDIF
[94]	788	IF ( gradient /= 0.0 ) THEN
	789	IF ( k /= 1 ) THEN
	790	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	791	ELSE
	792	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	793	ENDIF
[1]	794	ELSE
[94]	795	pt_init(k) = pt_init(k-1)
[1]	796	ENDIF
[94]	797	ENDDO
[1]	798
[94]	799	ELSE
	800
	801	pt_vertical_gradient_level_ind(1) = nzt+1
	802	DO k = nzt, 0, -1
[177]	803	IF ( i < 11 ) THEN
	804	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	805	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	806	gradient = pt_vertical_gradient(i) / 100.0
	807	pt_vertical_gradient_level_ind(i) = k + 1
	808	i = i + 1
[94]	809	ENDIF
	810	ENDIF
	811	IF ( gradient /= 0.0 ) THEN
	812	IF ( k /= nzt ) THEN
	813	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	814	ELSE
	815	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	816	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	817	ENDIF
	818	ELSE
	819	pt_init(k) = pt_init(k+1)
	820	ENDIF
	821	ENDDO
	822
	823	ENDIF
	824
[1]	825	!
	826	!-- In case of no given temperature gradients, choose gradient of neutral
	827	!-- stratification
[94]	828	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	829	pt_vertical_gradient_level(1) = 0.0
	830	ENDIF
	831
	832	!
[94]	833	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	834	!-- boundary condition
[19]	835	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	836
	837	!
	838	!-- If required, compute initial humidity or scalar profile using the given
	839	!-- humidity/scalar gradient. In case of scalar transport, initially store
	840	!-- values of the scalar parameters on humidity parameters
	841	IF ( passive_scalar ) THEN
	842	bc_q_b = bc_s_b
	843	bc_q_t = bc_s_t
	844	q_surface = s_surface
	845	q_surface_initial_change = s_surface_initial_change
	846	q_vertical_gradient = s_vertical_gradient
	847	q_vertical_gradient_level = s_vertical_gradient_level
	848	surface_waterflux = surface_scalarflux
	849	ENDIF
	850
[75]	851	IF ( humidity .OR. passive_scalar ) THEN
[1]	852
	853	i = 1
	854	gradient = 0.0
	855	q_vertical_gradient_level_ind(1) = 0
	856	DO k = 1, nzt+1
[177]	857	IF ( i < 11 ) THEN
	858	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	859	q_vertical_gradient_level(i) >= 0.0 ) THEN
	860	gradient = q_vertical_gradient(i) / 100.0
	861	q_vertical_gradient_level_ind(i) = k - 1
	862	i = i + 1
[1]	863	ENDIF
	864	ENDIF
	865	IF ( gradient /= 0.0 ) THEN
	866	IF ( k /= 1 ) THEN
	867	q_init(k) = q_init(k-1) + dzu(k) * gradient
	868	ELSE
	869	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	870	ENDIF
	871	ELSE
	872	q_init(k) = q_init(k-1)
	873	ENDIF
[72]	874	!
	875	!-- Avoid negative humidities
	876	IF ( q_init(k) < 0.0 ) THEN
	877	q_init(k) = 0.0
	878	ENDIF
[1]	879	ENDDO
	880
	881	!
	882	!-- In case of no given humidity gradients, choose zero gradient
	883	!-- conditions
	884	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	885	q_vertical_gradient_level(1) = 0.0
	886	ENDIF
	887
	888	!
	889	!-- Store humidity gradient at the top boundary for possile Neumann
	890	!-- boundary condition
[19]	891	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	892
	893	ENDIF
	894
[94]	895	!
	896	!-- If required, compute initial salinity profile using the given salinity
	897	!-- gradients
	898	IF ( ocean ) THEN
	899
	900	i = 1
	901	gradient = 0.0
	902
	903	sa_vertical_gradient_level_ind(1) = nzt+1
	904	DO k = nzt, 0, -1
[177]	905	IF ( i < 11 ) THEN
	906	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	907	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	908	gradient = sa_vertical_gradient(i) / 100.0
	909	sa_vertical_gradient_level_ind(i) = k + 1
	910	i = i + 1
[94]	911	ENDIF
	912	ENDIF
	913	IF ( gradient /= 0.0 ) THEN
	914	IF ( k /= nzt ) THEN
	915	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	916	ELSE
	917	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	918	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	919	ENDIF
	920	ELSE
	921	sa_init(k) = sa_init(k+1)
	922	ENDIF
	923	ENDDO
	924
	925	ENDIF
	926
[138]	927	!
	928	!-- If required compute the profile of leaf area density used in the plant canopy model
	929	IF ( plant_canopy ) THEN
	930
	931	i = 1
	932	gradient = 0.0
[1]	933
[138]	934	IF ( .NOT. ocean ) THEN
[153]	935
	936	lad(0) = lad_surface
[138]	937
	938	lad_vertical_gradient_level_ind(1) = 0
	939	DO k = 1, pch_index
[177]	940	IF ( i < 11 ) THEN
	941	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	942	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	943	gradient = lad_vertical_gradient(i)
	944	lad_vertical_gradient_level_ind(i) = k - 1
	945	i = i + 1
[138]	946	ENDIF
	947	ENDIF
	948	IF ( gradient /= 0.0 ) THEN
	949	IF ( k /= 1 ) THEN
	950	lad(k) = lad(k-1) + dzu(k) * gradient
	951	ELSE
	952	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	953	ENDIF
	954	ELSE
	955	lad(k) = lad(k-1)
	956	ENDIF
	957	ENDDO
	958
	959	ENDIF
	960
[1]	961	!
[138]	962	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	963	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	964	lad_vertical_gradient_level(1) = 0.0
	965	ENDIF
	966
	967	ENDIF
	968
	969	ENDIF
	970
	971	!
[1]	972	!-- Compute Coriolis parameter
	973	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	974	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	975
	976	!
[97]	977	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	978	!-- set the reference temperature equal to the surface temperature.
	979	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	980
	981	!
[97]	982	!-- Reference value has to be used in buoyancy terms
	983	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	984
	985	!
	986	!-- Sign of buoyancy/stability terms
	987	IF ( ocean ) atmos_ocean_sign = -1.0
	988
	989	!
[108]	990	!-- Ocean version must use flux boundary conditions at the top
	991	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	992	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	993	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	994	ENDIF
[97]	995
	996	!
[1]	997	!-- In case of a given slope, compute the relevant quantities
	998	IF ( alpha_surface /= 0.0 ) THEN
	999	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1000	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1001	' ) must be < 90.0'
[226]	1002	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1003	ENDIF
	1004	sloping_surface = .TRUE.
	1005	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1006	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1007	ENDIF
	1008
	1009	!
	1010	!-- Check time step and cfl_factor
	1011	IF ( dt /= -1.0 ) THEN
	1012	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1013	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1014	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1015	ENDIF
	1016	dt_3d = dt
	1017	dt_fixed = .TRUE.
	1018	ENDIF
	1019
	1020	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1021	IF ( cfl_factor == -1.0 ) THEN
	1022	IF ( momentum_advec == 'ups-scheme' .OR. &
	1023	scalar_advec == 'ups-scheme' ) THEN
	1024	cfl_factor = 0.8
	1025	ELSE
	1026	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1027	cfl_factor = 0.8
	1028	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1029	cfl_factor = 0.9
	1030	ELSE
	1031	cfl_factor = 0.1
	1032	ENDIF
	1033	ENDIF
	1034	ELSE
[215]	1035	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1036	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1037	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1038	ENDIF
	1039	ENDIF
	1040
	1041	!
	1042	!-- Store simulated time at begin
	1043	simulated_time_at_begin = simulated_time
	1044
	1045	!
[291]	1046	!-- Store reference time for coupled runs and change the coupling flag,
	1047	!-- if ...
	1048	IF ( simulated_time == 0.0 ) THEN
	1049	IF ( coupling_start_time == 0.0 ) THEN
	1050	time_since_reference_point = 0.0
	1051	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1052	run_coupled = .FALSE.
	1053	ENDIF
	1054	ENDIF
	1055
	1056	!
[1]	1057	!-- Set wind speed in the Galilei-transformed system
	1058	IF ( galilei_transformation ) THEN
	1059	IF ( use_ug_for_galilei_tr .AND. &
	1060	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1061	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1062	u_gtrans = ug_surface
	1063	v_gtrans = vg_surface
	1064	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1065	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1066	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1067	' with galilei transformation'
[226]	1068	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1069	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1070	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1071	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1072	' with galilei transformation'
[226]	1073	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1074	ELSE
[215]	1075	message_string = 'variable translation speed used for galilei-' // &
	1076	'transformation, which may cause & instabilities in stably ' // &
	1077	'stratified regions'
[226]	1078	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1079	ENDIF
	1080	ENDIF
	1081
	1082	!
	1083	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1084	!-- fluxes have to be used in the diffusion-terms
	1085	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1086
	1087	!
	1088	!-- Check boundary conditions and set internal variables:
	1089	!-- Lateral boundary conditions
[73]	1090	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1091	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1092	message_string = 'unknown boundary condition: bc_lr = "' // &
	1093	TRIM( bc_lr ) // '"'
[226]	1094	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1095	ENDIF
[73]	1096	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1097	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1098	message_string = 'unknown boundary condition: bc_ns = "' // &
	1099	TRIM( bc_ns ) // '"'
[226]	1100	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1101	ENDIF
	1102
	1103	!
	1104	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1105	!-- Willimas advection scheme. Several schemes and tools do not work with
	1106	!-- non-cyclic boundary conditions.
	1107	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1108	IF ( psolver /= 'multigrid' ) THEN
[215]	1109	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1110	'psolver = "' // TRIM( psolver ) // '"'
[226]	1111	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1112	ENDIF
	1113	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1114	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1115	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1116	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1117	ENDIF
	1118	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1119	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1120	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1121	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1122	ENDIF
	1123	IF ( galilei_transformation ) THEN
[215]	1124	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1125	'galilei_transformation = .T.'
[226]	1126	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1127	ENDIF
	1128	ENDIF
	1129
	1130	!
	1131	!-- Bottom boundary condition for the turbulent Kinetic energy
	1132	IF ( bc_e_b == 'neumann' ) THEN
	1133	ibc_e_b = 1
	1134	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1135	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1136	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1137	ENDIF
	1138	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1139	ibc_e_b = 2
	1140	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1141	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1142	TRIM( bc_e_b ) // '"'
[226]	1143	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1144	ENDIF
	1145	IF ( .NOT. prandtl_layer ) THEN
	1146	bc_e_b = 'neumann'
	1147	ibc_e_b = 1
[215]	1148	message_string = 'boundary condition bc_e_b changed to "' // &
	1149	TRIM( bc_e_b ) // '"'
[226]	1150	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1151	ENDIF
	1152	ELSE
[215]	1153	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1154	TRIM( bc_e_b ) // '"'
[226]	1155	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1156	ENDIF
	1157
	1158	!
	1159	!-- Boundary conditions for perturbation pressure
	1160	IF ( bc_p_b == 'dirichlet' ) THEN
	1161	ibc_p_b = 0
	1162	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1163	ibc_p_b = 1
	1164	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1165	ibc_p_b = 2
	1166	ELSE
[215]	1167	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1168	TRIM( bc_p_b ) // '"'
[226]	1169	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1170	ENDIF
	1171	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1172	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1173	'" not allowed with prandtl_layer = .FALSE.'
[226]	1174	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1175	ENDIF
	1176	IF ( bc_p_t == 'dirichlet' ) THEN
	1177	ibc_p_t = 0
	1178	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1179	ibc_p_t = 1
	1180	ELSE
[215]	1181	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1182	TRIM( bc_p_t ) // '"'
[226]	1183	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1184	ENDIF
	1185
	1186	!
	1187	!-- Boundary conditions for potential temperature
[102]	1188	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1189	ibc_pt_b = 2
[1]	1190	ELSE
[102]	1191	IF ( bc_pt_b == 'dirichlet' ) THEN
	1192	ibc_pt_b = 0
	1193	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1194	ibc_pt_b = 1
	1195	ELSE
[215]	1196	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1197	TRIM( bc_pt_b ) // '"'
[226]	1198	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1199	ENDIF
	1200	ENDIF
[102]	1201
[1]	1202	IF ( bc_pt_t == 'dirichlet' ) THEN
	1203	ibc_pt_t = 0
	1204	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1205	ibc_pt_t = 1
[19]	1206	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1207	ibc_pt_t = 2
[1]	1208	ELSE
[215]	1209	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1210	TRIM( bc_pt_t ) // '"'
[226]	1211	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1212	ENDIF
	1213
[20]	1214	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1215	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1216	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1217	top_momentumflux_v /= 9999999.9 ) THEN
	1218	constant_top_momentumflux = .TRUE.
	1219	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1220	top_momentumflux_v == 9999999.9 ) ) THEN
	1221	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1222	'must be set'
[226]	1223	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1224	ENDIF
[1]	1225
	1226	!
	1227	!-- A given surface temperature implies Dirichlet boundary condition for
	1228	!-- temperature. In this case specification of a constant heat flux is
	1229	!-- forbidden.
	1230	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1231	surface_heatflux /= 0.0 ) THEN
[215]	1232	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1233	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1234	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1235	ENDIF
	1236	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1237	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1238	'wed with pt_surface_initial_change (/=0) = ', &
	1239	pt_surface_initial_change
[226]	1240	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1241	ENDIF
	1242
	1243	!
[19]	1244	!-- A given temperature at the top implies Dirichlet boundary condition for
	1245	!-- temperature. In this case specification of a constant heat flux is
	1246	!-- forbidden.
	1247	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1248	top_heatflux /= 0.0 ) THEN
[215]	1249	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1250	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1251	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1252	ENDIF
	1253
	1254	!
[95]	1255	!-- Boundary conditions for salinity
	1256	IF ( ocean ) THEN
	1257	IF ( bc_sa_t == 'dirichlet' ) THEN
	1258	ibc_sa_t = 0
	1259	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1260	ibc_sa_t = 1
	1261	ELSE
[215]	1262	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1263	TRIM( bc_sa_t ) // '"'
[226]	1264	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1265	ENDIF
	1266
	1267	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1268	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1269	message_string = 'boundary condition: bc_sa_t = "' // &
	1270	TRIM( bc_sa_t ) // '" requires to set ' // &
	1271	'top_salinityflux'
[226]	1272	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1273	ENDIF
[95]	1274
	1275	!
	1276	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1277	!-- salinity. In this case specification of a constant salinity flux is
	1278	!-- forbidden.
	1279	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1280	top_salinityflux /= 0.0 ) THEN
[215]	1281	message_string = 'boundary condition: bc_sa_t = "' // &
	1282	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1283	'constant_top_salinityflux = .TRUE.'
[226]	1284	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1285	ENDIF
	1286
	1287	ENDIF
	1288
	1289	!
[75]	1290	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1291	!-- water content / scalar
[75]	1292	IF ( humidity .OR. passive_scalar ) THEN
	1293	IF ( humidity ) THEN
[1]	1294	sq = 'q'
	1295	ELSE
	1296	sq = 's'
	1297	ENDIF
	1298	IF ( bc_q_b == 'dirichlet' ) THEN
	1299	ibc_q_b = 0
	1300	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1301	ibc_q_b = 1
	1302	ELSE
[215]	1303	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1304	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1305	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1306	ENDIF
	1307	IF ( bc_q_t == 'dirichlet' ) THEN
	1308	ibc_q_t = 0
	1309	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1310	ibc_q_t = 1
	1311	ELSE
[215]	1312	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1313	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1314	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1315	ENDIF
	1316
	1317	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1318
	1319	!
	1320	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1321	!-- humidity. In this case specification of a constant water flux is
[1]	1322	!-- forbidden.
	1323	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1324	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1325	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1326	'th prescribed surface flux'
[226]	1327	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1328	ENDIF
	1329	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1330	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1331	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1332	q_surface_initial_change
[226]	1333	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1334	ENDIF
	1335
	1336	ENDIF
	1337
	1338	!
	1339	!-- Boundary conditions for horizontal components of wind speed
	1340	IF ( bc_uv_b == 'dirichlet' ) THEN
	1341	ibc_uv_b = 0
	1342	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1343	ibc_uv_b = 1
	1344	IF ( prandtl_layer ) THEN
[215]	1345	message_string = 'boundary condition: bc_uv_b = "' // &
	1346	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1347	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1348	ENDIF
	1349	ELSE
[215]	1350	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1351	TRIM( bc_uv_b ) // '"'
[226]	1352	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1353	ENDIF
[215]	1354
[108]	1355	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1356	bc_uv_t = 'neumann'
[1]	1357	ibc_uv_t = 1
	1358	ELSE
[132]	1359	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1360	ibc_uv_t = 0
	1361	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1362	ibc_uv_t = 1
	1363	ELSE
[215]	1364	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1365	TRIM( bc_uv_t ) // '"'
[226]	1366	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1367	ENDIF
	1368	ENDIF
	1369
	1370	!
	1371	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1372	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1373	IF ( momentum_advec == 'ups-scheme' ) THEN
	1374	rayleigh_damping_factor = 0.01
	1375	ELSE
	1376	rayleigh_damping_factor = 0.0
	1377	ENDIF
	1378	ELSE
	1379	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1380	THEN
[215]	1381	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1382	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1383	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1384	ENDIF
	1385	ENDIF
	1386
	1387	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1388	IF ( .NOT. ocean ) THEN
	1389	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1390	ELSE
	1391	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1392	ENDIF
[1]	1393	ELSE
[108]	1394	IF ( .NOT. ocean ) THEN
	1395	IF ( rayleigh_damping_height < 0.0 .OR. &
	1396	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1397	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1398	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1399	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1400	ENDIF
[108]	1401	ELSE
	1402	IF ( rayleigh_damping_height > 0.0 .OR. &
	1403	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1404	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1405	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1406	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1407	ENDIF
[1]	1408	ENDIF
	1409	ENDIF
	1410
	1411	!
	1412	!-- Check limiters for Upstream-Spline scheme
	1413	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1414	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1415	overshoot_limit_e < 0.0 ) THEN
[215]	1416	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1417	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1418	ENDIF
	1419	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1420	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1421	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1422	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1423	ENDIF
	1424
	1425	!
	1426	!-- Check number of chosen statistic regions. More than 10 regions are not
	1427	!-- allowed, because so far no more than 10 corresponding output files can
	1428	!-- be opened (cf. check_open)
	1429	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1430	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1431	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1432	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1433	ENDIF
	1434	IF ( normalizing_region > statistic_regions .OR. &
	1435	normalizing_region < 0) THEN
[215]	1436	WRITE ( message_string, * ) 'normalizing_region = ', &
	1437	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1438	' (value of statistic_regions)'
[226]	1439	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1440	ENDIF
	1441
	1442	!
[116]	1443	!-- Check the interval for sorting particles.
	1444	!-- Using particles as cloud droplets requires sorting after each timestep.
	1445	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1446	dt_sort_particles = 0.0
[215]	1447	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1448	'_droplets = .TRUE.'
[226]	1449	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1450	ENDIF
	1451
	1452	!
[1]	1453	!-- Set the default intervals for data output, if necessary
	1454	!-- NOTE: dt_dosp has already been set in package_parin
	1455	IF ( dt_data_output /= 9999999.9 ) THEN
	1456	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1457	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1458	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1459	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1460	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1461	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1462	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1463	ENDIF
	1464
	1465	!
	1466	!-- Set the default skip time intervals for data output, if necessary
	1467	IF ( skip_time_dopr == 9999999.9 ) &
	1468	skip_time_dopr = skip_time_data_output
	1469	IF ( skip_time_dosp == 9999999.9 ) &
	1470	skip_time_dosp = skip_time_data_output
	1471	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1472	skip_time_do2d_xy = skip_time_data_output
	1473	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1474	skip_time_do2d_xz = skip_time_data_output
	1475	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1476	skip_time_do2d_yz = skip_time_data_output
	1477	IF ( skip_time_do3d == 9999999.9 ) &
	1478	skip_time_do3d = skip_time_data_output
	1479	IF ( skip_time_data_output_av == 9999999.9 ) &
	1480	skip_time_data_output_av = skip_time_data_output
	1481
	1482	!
	1483	!-- Check the average intervals (first for 3d-data, then for profiles and
	1484	!-- spectra)
	1485	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1486	WRITE( message_string, * ) 'averaging_interval = ', &
	1487	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1488	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1489	ENDIF
	1490
	1491	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1492	averaging_interval_pr = averaging_interval
	1493	ENDIF
	1494
	1495	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1496	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1497	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1498	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1499	ENDIF
	1500
	1501	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1502	averaging_interval_sp = averaging_interval
	1503	ENDIF
	1504
	1505	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1506	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1507	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1508	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1509	ENDIF
	1510
	1511	!
	1512	!-- Set the default interval for profiles entering the temporal average
	1513	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1514	dt_averaging_input_pr = dt_averaging_input
	1515	ENDIF
	1516
	1517	!
	1518	!-- Set the default interval for the output of timeseries to a reasonable
	1519	!-- value (tries to minimize the number of calls of flow_statistics)
	1520	IF ( dt_dots == 9999999.9 ) THEN
	1521	IF ( averaging_interval_pr == 0.0 ) THEN
	1522	dt_dots = MIN( dt_run_control, dt_dopr )
	1523	ELSE
	1524	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1525	ENDIF
	1526	ENDIF
	1527
	1528	!
	1529	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1530	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1531	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1532	dt_averaging_input, ' must be <= averaging_interval = ', &
	1533	averaging_interval
[226]	1534	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1535	ENDIF
	1536
	1537	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1538	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1539	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1540	averaging_interval_pr
[226]	1541	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1542	ENDIF
	1543
	1544	!
[72]	1545	!-- Set the default value for the integration interval of precipitation amount
	1546	IF ( precipitation ) THEN
	1547	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1548	precipitation_amount_interval = dt_do2d_xy
	1549	ELSE
	1550	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1551	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1552	precipitation_amount_interval, ' must not be larger than ', &
	1553	'dt_do2d_xy = ', dt_do2d_xy
[226]	1554	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1555	ENDIF
	1556	ENDIF
	1557	ENDIF
	1558
	1559	!
[1]	1560	!-- Determine the number of output profiles and check whether they are
	1561	!-- permissible
	1562	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1563
	1564	dopr_n = dopr_n + 1
	1565	i = dopr_n
	1566
	1567	!
	1568	!-- Determine internal profile number (for hom, homs)
	1569	!-- and store height levels
	1570	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1571
	1572	CASE ( 'u', '#u' )
	1573	dopr_index(i) = 1
[87]	1574	dopr_unit(i) = 'm/s'
[1]	1575	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1576	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1577	dopr_initial_index(i) = 5
	1578	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1579	data_output_pr(i) = data_output_pr(i)(2:)
	1580	ENDIF
	1581
	1582	CASE ( 'v', '#v' )
	1583	dopr_index(i) = 2
[87]	1584	dopr_unit(i) = 'm/s'
	1585	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1586	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1587	dopr_initial_index(i) = 6
	1588	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1589	data_output_pr(i) = data_output_pr(i)(2:)
	1590	ENDIF
	1591
	1592	CASE ( 'w' )
	1593	dopr_index(i) = 3
[87]	1594	dopr_unit(i) = 'm/s'
	1595	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1596
	1597	CASE ( 'pt', '#pt' )
	1598	IF ( .NOT. cloud_physics ) THEN
	1599	dopr_index(i) = 4
[87]	1600	dopr_unit(i) = 'K'
[1]	1601	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1602	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1603	dopr_initial_index(i) = 7
	1604	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1605	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1606	data_output_pr(i) = data_output_pr(i)(2:)
	1607	ENDIF
	1608	ELSE
	1609	dopr_index(i) = 43
[87]	1610	dopr_unit(i) = 'K'
[1]	1611	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1613	dopr_initial_index(i) = 28
	1614	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1615	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1616	data_output_pr(i) = data_output_pr(i)(2:)
	1617	ENDIF
	1618	ENDIF
	1619
	1620	CASE ( 'e' )
	1621	dopr_index(i) = 8
[87]	1622	dopr_unit(i) = 'm2/s2'
[1]	1623	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1624	hom(nzb,2,8,:) = 0.0
	1625
	1626	CASE ( 'km', '#km' )
	1627	dopr_index(i) = 9
[87]	1628	dopr_unit(i) = 'm2/s'
[1]	1629	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1630	hom(nzb,2,9,:) = 0.0
	1631	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1632	dopr_initial_index(i) = 23
	1633	hom(:,2,23,:) = hom(:,2,9,:)
	1634	data_output_pr(i) = data_output_pr(i)(2:)
	1635	ENDIF
	1636
	1637	CASE ( 'kh', '#kh' )
	1638	dopr_index(i) = 10
[87]	1639	dopr_unit(i) = 'm2/s'
[1]	1640	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1641	hom(nzb,2,10,:) = 0.0
	1642	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1643	dopr_initial_index(i) = 24
	1644	hom(:,2,24,:) = hom(:,2,10,:)
	1645	data_output_pr(i) = data_output_pr(i)(2:)
	1646	ENDIF
	1647
	1648	CASE ( 'l', '#l' )
	1649	dopr_index(i) = 11
[87]	1650	dopr_unit(i) = 'm'
[1]	1651	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1652	hom(nzb,2,11,:) = 0.0
	1653	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1654	dopr_initial_index(i) = 25
	1655	hom(:,2,25,:) = hom(:,2,11,:)
	1656	data_output_pr(i) = data_output_pr(i)(2:)
	1657	ENDIF
	1658
	1659	CASE ( 'w"u"' )
	1660	dopr_index(i) = 12
[87]	1661	dopr_unit(i) = 'm2/s2'
[1]	1662	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1663	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1664
	1665	CASE ( 'wu' )
	1666	dopr_index(i) = 13
[87]	1667	dopr_unit(i) = 'm2/s2'
[1]	1668	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1669
	1670	CASE ( 'w"v"' )
	1671	dopr_index(i) = 14
[87]	1672	dopr_unit(i) = 'm2/s2'
[1]	1673	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1674	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1675
	1676	CASE ( 'wv' )
	1677	dopr_index(i) = 15
[87]	1678	dopr_unit(i) = 'm2/s2'
[1]	1679	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1680
	1681	CASE ( 'w"pt"' )
	1682	dopr_index(i) = 16
[87]	1683	dopr_unit(i) = 'K m/s'
[1]	1684	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1685
	1686	CASE ( 'wpt' )
	1687	dopr_index(i) = 17
[87]	1688	dopr_unit(i) = 'K m/s'
[1]	1689	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1690
	1691	CASE ( 'wpt' )
	1692	dopr_index(i) = 18
[87]	1693	dopr_unit(i) = 'K m/s'
[1]	1694	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1695
	1696	CASE ( 'wu' )
	1697	dopr_index(i) = 19
[87]	1698	dopr_unit(i) = 'm2/s2'
[1]	1699	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1700	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1701
	1702	CASE ( 'wv' )
	1703	dopr_index(i) = 20
[87]	1704	dopr_unit(i) = 'm2/s2'
[1]	1705	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1706	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1707
	1708	CASE ( 'wptBC' )
	1709	dopr_index(i) = 21
[87]	1710	dopr_unit(i) = 'K m/s'
[1]	1711	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1712
	1713	CASE ( 'wptBC' )
	1714	dopr_index(i) = 22
[87]	1715	dopr_unit(i) = 'K m/s'
[1]	1716	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1717
[96]	1718	CASE ( 'sa', '#sa' )
	1719	IF ( .NOT. ocean ) THEN
[215]	1720	message_string = 'data_output_pr = ' // &
	1721	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1722	'lemented for ocean = .FALSE.'
[226]	1723	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1724	ELSE
	1725	dopr_index(i) = 23
	1726	dopr_unit(i) = 'psu'
	1727	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1728	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1729	dopr_initial_index(i) = 26
	1730	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1731	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1732	data_output_pr(i) = data_output_pr(i)(2:)
	1733	ENDIF
	1734	ENDIF
	1735
[1]	1736	CASE ( 'u*2' )
	1737	dopr_index(i) = 30
[87]	1738	dopr_unit(i) = 'm2/s2'
[1]	1739	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1740
	1741	CASE ( 'v*2' )
	1742	dopr_index(i) = 31
[87]	1743	dopr_unit(i) = 'm2/s2'
[1]	1744	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1745
	1746	CASE ( 'w*2' )
	1747	dopr_index(i) = 32
[87]	1748	dopr_unit(i) = 'm2/s2'
[1]	1749	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1750
	1751	CASE ( 'pt*2' )
	1752	dopr_index(i) = 33
[87]	1753	dopr_unit(i) = 'K2'
[1]	1754	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1755
	1756	CASE ( 'e*' )
	1757	dopr_index(i) = 34
[87]	1758	dopr_unit(i) = 'm2/s2'
[1]	1759	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1760
	1761	CASE ( 'w2pt' )
	1762	dopr_index(i) = 35
[87]	1763	dopr_unit(i) = 'K m2/s2'
[1]	1764	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1765
	1766	CASE ( 'wpt2' )
	1767	dopr_index(i) = 36
[87]	1768	dopr_unit(i) = 'K2 m/s'
[1]	1769	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1770
	1771	CASE ( 'we' )
	1772	dopr_index(i) = 37
[87]	1773	dopr_unit(i) = 'm3/s3'
[1]	1774	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1775
	1776	CASE ( 'w*3' )
	1777	dopr_index(i) = 38
[87]	1778	dopr_unit(i) = 'm3/s3'
[1]	1779	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1780
	1781	CASE ( 'Sw' )
	1782	dopr_index(i) = 39
[89]	1783	dopr_unit(i) = 'none'
[1]	1784	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1785
[232]	1786	CASE ( 'p' )
	1787	dopr_index(i) = 40
	1788	dopr_unit(i) = 'Pa'
	1789	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1790
[1]	1791	CASE ( 'q', '#q' )
[108]	1792	IF ( .NOT. humidity ) THEN
[215]	1793	message_string = 'data_output_pr = ' // &
	1794	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1795	'lemented for humidity = .FALSE.'
[226]	1796	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1797	ELSE
	1798	dopr_index(i) = 41
[87]	1799	dopr_unit(i) = 'kg/kg'
	1800	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1801	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1802	dopr_initial_index(i) = 26
	1803	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1804	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1805	data_output_pr(i) = data_output_pr(i)(2:)
	1806	ENDIF
	1807	ENDIF
	1808
	1809	CASE ( 's', '#s' )
	1810	IF ( .NOT. passive_scalar ) THEN
[215]	1811	message_string = 'data_output_pr = ' // &
	1812	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1813	'lemented for passive_scalar = .FALSE.'
[226]	1814	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1815	ELSE
	1816	dopr_index(i) = 41
[87]	1817	dopr_unit(i) = 'kg/m3'
	1818	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1819	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1820	dopr_initial_index(i) = 26
	1821	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1822	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1823	data_output_pr(i) = data_output_pr(i)(2:)
	1824	ENDIF
	1825	ENDIF
	1826
	1827	CASE ( 'qv', '#qv' )
	1828	IF ( .NOT. cloud_physics ) THEN
	1829	dopr_index(i) = 41
[87]	1830	dopr_unit(i) = 'kg/kg'
	1831	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1832	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1833	dopr_initial_index(i) = 26
	1834	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1835	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1836	data_output_pr(i) = data_output_pr(i)(2:)
	1837	ENDIF
	1838	ELSE
	1839	dopr_index(i) = 42
[87]	1840	dopr_unit(i) = 'kg/kg'
	1841	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1842	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1843	dopr_initial_index(i) = 27
	1844	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1845	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1846	data_output_pr(i) = data_output_pr(i)(2:)
	1847	ENDIF
	1848	ENDIF
	1849
	1850	CASE ( 'lpt', '#lpt' )
	1851	IF ( .NOT. cloud_physics ) THEN
[215]	1852	message_string = 'data_output_pr = ' // &
	1853	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1854	'lemented for cloud_physics = .FALSE.'
[226]	1855	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1856	ELSE
	1857	dopr_index(i) = 4
[87]	1858	dopr_unit(i) = 'K'
[1]	1859	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1860	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1861	dopr_initial_index(i) = 7
	1862	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1863	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1864	data_output_pr(i) = data_output_pr(i)(2:)
	1865	ENDIF
	1866	ENDIF
	1867
	1868	CASE ( 'vpt', '#vpt' )
	1869	dopr_index(i) = 44
[87]	1870	dopr_unit(i) = 'K'
	1871	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1872	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1873	dopr_initial_index(i) = 29
	1874	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1875	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1876	data_output_pr(i) = data_output_pr(i)(2:)
	1877	ENDIF
	1878
	1879	CASE ( 'w"vpt"' )
	1880	dopr_index(i) = 45
[87]	1881	dopr_unit(i) = 'K m/s'
[1]	1882	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1883
	1884	CASE ( 'wvpt' )
	1885	dopr_index(i) = 46
[87]	1886	dopr_unit(i) = 'K m/s'
[1]	1887	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1888
	1889	CASE ( 'wvpt' )
	1890	dopr_index(i) = 47
[87]	1891	dopr_unit(i) = 'K m/s'
[1]	1892	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1893
	1894	CASE ( 'w"q"' )
[108]	1895	IF ( .NOT. humidity ) THEN
[215]	1896	message_string = 'data_output_pr = ' // &
	1897	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1898	'lemented for humidity = .FALSE.'
[226]	1899	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1900	ELSE
	1901	dopr_index(i) = 48
[87]	1902	dopr_unit(i) = 'kg/kg m/s'
[1]	1903	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1904	ENDIF
	1905
	1906	CASE ( 'wq' )
[108]	1907	IF ( .NOT. humidity ) THEN
[215]	1908	message_string = 'data_output_pr = ' // &
	1909	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1910	'lemented for humidity = .FALSE.'
[226]	1911	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1912	ELSE
	1913	dopr_index(i) = 49
[87]	1914	dopr_unit(i) = 'kg/kg m/s'
[1]	1915	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1916	ENDIF
	1917
	1918	CASE ( 'wq' )
[108]	1919	IF ( .NOT. humidity ) THEN
[215]	1920	message_string = 'data_output_pr = ' // &
	1921	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1922	'lemented for humidity = .FALSE.'
[226]	1923	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1924	ELSE
	1925	dopr_index(i) = 50
[87]	1926	dopr_unit(i) = 'kg/kg m/s'
[1]	1927	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1928	ENDIF
	1929
	1930	CASE ( 'w"s"' )
	1931	IF ( .NOT. passive_scalar ) THEN
[215]	1932	message_string = 'data_output_pr = ' // &
	1933	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1934	'lemented for passive_scalar = .FALSE.'
[226]	1935	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1936	ELSE
	1937	dopr_index(i) = 48
[87]	1938	dopr_unit(i) = 'kg/m3 m/s'
[1]	1939	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1940	ENDIF
	1941
	1942	CASE ( 'ws' )
	1943	IF ( .NOT. passive_scalar ) THEN
[215]	1944	message_string = 'data_output_pr = ' // &
	1945	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1946	'lemented for passive_scalar = .FALSE.'
[226]	1947	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1948	ELSE
	1949	dopr_index(i) = 49
[87]	1950	dopr_unit(i) = 'kg/m3 m/s'
[1]	1951	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1952	ENDIF
	1953
	1954	CASE ( 'ws' )
	1955	IF ( .NOT. passive_scalar ) THEN
[215]	1956	message_string = 'data_output_pr = ' // &
	1957	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1958	'lemented for passive_scalar = .FALSE.'
[226]	1959	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1960	ELSE
	1961	dopr_index(i) = 50
[87]	1962	dopr_unit(i) = 'kg/m3 m/s'
[1]	1963	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1964	ENDIF
	1965
	1966	CASE ( 'w"qv"' )
[75]	1967	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1968	THEN
	1969	dopr_index(i) = 48
[87]	1970	dopr_unit(i) = 'kg/kg m/s'
[1]	1971	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1972	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1973	dopr_index(i) = 51
[87]	1974	dopr_unit(i) = 'kg/kg m/s'
[1]	1975	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1976	ELSE
[215]	1977	message_string = 'data_output_pr = ' // &
	1978	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1979	'lemented for cloud_physics = .FALSE. an&' // &
	1980	'd humidity = .FALSE.'
[226]	1981	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1982	ENDIF
	1983
	1984	CASE ( 'wqv' )
[75]	1985	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1986	THEN
	1987	dopr_index(i) = 49
[87]	1988	dopr_unit(i) = 'kg/kg m/s'
[1]	1989	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1990	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1991	dopr_index(i) = 52
[87]	1992	dopr_unit(i) = 'kg/kg m/s'
[1]	1993	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1994	ELSE
[215]	1995	message_string = 'data_output_pr = ' // &
	1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1997	'lemented for cloud_physics = .FALSE. an&' // &
	1998	'd humidity = .FALSE.'
[226]	1999	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2000	ENDIF
	2001
	2002	CASE ( 'wqv' )
[75]	2003	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2004	THEN
	2005	dopr_index(i) = 50
[87]	2006	dopr_unit(i) = 'kg/kg m/s'
[1]	2007	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2008	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2009	dopr_index(i) = 53
[87]	2010	dopr_unit(i) = 'kg/kg m/s'
[1]	2011	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2012	ELSE
[215]	2013	message_string = 'data_output_pr = ' // &
	2014	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2015	'lemented for cloud_physics = .FALSE. an&' // &
	2016	'd humidity = .FALSE.'
[226]	2017	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2018	ENDIF
	2019
	2020	CASE ( 'ql' )
	2021	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2022	message_string = 'data_output_pr = ' // &
	2023	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2024	'lemented for cloud_physics = .FALSE. or' // &
	2025	'&cloud_droplets = .FALSE.'
[226]	2026	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2027	ELSE
	2028	dopr_index(i) = 54
[87]	2029	dopr_unit(i) = 'kg/kg'
[1]	2030	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2031	ENDIF
	2032
	2033	CASE ( 'wuu*/dz' )
	2034	dopr_index(i) = 55
[87]	2035	dopr_unit(i) = 'm2/s3'
[1]	2036	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2037
	2038	CASE ( 'wp/dz' )
	2039	dopr_index(i) = 56
[87]	2040	dopr_unit(i) = 'm2/s3'
[106]	2041	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2042
	2043	CASE ( 'w"e/dz' )
	2044	dopr_index(i) = 57
[87]	2045	dopr_unit(i) = 'm2/s3'
[1]	2046	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2047
	2048	CASE ( 'u"pt"' )
	2049	dopr_index(i) = 58
[87]	2050	dopr_unit(i) = 'K m/s'
[1]	2051	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2052
	2053	CASE ( 'upt' )
	2054	dopr_index(i) = 59
[87]	2055	dopr_unit(i) = 'K m/s'
[1]	2056	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2057
	2058	CASE ( 'upt_t' )
	2059	dopr_index(i) = 60
[87]	2060	dopr_unit(i) = 'K m/s'
[1]	2061	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2062
	2063	CASE ( 'v"pt"' )
	2064	dopr_index(i) = 61
[87]	2065	dopr_unit(i) = 'K m/s'
[1]	2066	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2067
	2068	CASE ( 'vpt' )
	2069	dopr_index(i) = 62
[87]	2070	dopr_unit(i) = 'K m/s'
[1]	2071	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2072
	2073	CASE ( 'vpt_t' )
	2074	dopr_index(i) = 63
[87]	2075	dopr_unit(i) = 'K m/s'
[1]	2076	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2077
[96]	2078	CASE ( 'rho' )
	2079	dopr_index(i) = 64
	2080	dopr_unit(i) = 'kg/m3'
	2081	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2082
[96]	2083	CASE ( 'w"sa"' )
	2084	IF ( .NOT. ocean ) THEN
[215]	2085	message_string = 'data_output_pr = ' // &
	2086	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2087	'lemented for ocean = .FALSE.'
[226]	2088	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2089	ELSE
	2090	dopr_index(i) = 65
	2091	dopr_unit(i) = 'psu m/s'
	2092	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2093	ENDIF
	2094
	2095	CASE ( 'wsa' )
	2096	IF ( .NOT. ocean ) THEN
[215]	2097	message_string = 'data_output_pr = ' // &
	2098	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2099	'lemented for ocean = .FALSE.'
[226]	2100	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2101	ELSE
	2102	dopr_index(i) = 66
	2103	dopr_unit(i) = 'psu m/s'
	2104	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2105	ENDIF
	2106
	2107	CASE ( 'wsa' )
	2108	IF ( .NOT. ocean ) THEN
[215]	2109	message_string = 'data_output_pr = ' // &
	2110	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2111	'lemented for ocean = .FALSE.'
[226]	2112	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2113	ELSE
	2114	dopr_index(i) = 67
	2115	dopr_unit(i) = 'psu m/s'
	2116	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2117	ENDIF
	2118
[106]	2119	CASE ( 'wp' )
	2120	dopr_index(i) = 68
	2121	dopr_unit(i) = 'm3/s3'
	2122	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2123
[106]	2124	CASE ( 'w"e' )
	2125	dopr_index(i) = 69
	2126	dopr_unit(i) = 'm3/s3'
	2127	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2128
[197]	2129	CASE ( 'q*2' )
	2130	IF ( .NOT. humidity ) THEN
[215]	2131	message_string = 'data_output_pr = ' // &
	2132	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2133	'lemented for humidity = .FALSE.'
[226]	2134	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2135	ELSE
	2136	dopr_index(i) = 70
	2137	dopr_unit(i) = 'kg2/kg2'
	2138	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2139	ENDIF
[106]	2140
[1]	2141	CASE DEFAULT
[87]	2142
	2143	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2144
	2145	IF ( unit == 'illegal' ) THEN
[215]	2146	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2147	message_string = 'illegal value for data_output_pr or ' // &
	2148	'data_output_pr_user = "' // &
	2149	TRIM( data_output_pr(i) ) // '"'
[226]	2150	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2151	ELSE
	2152	message_string = 'illegal value for data_output_pr = "' // &
	2153	TRIM( data_output_pr(i) ) // '"'
[226]	2154	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2155	ENDIF
[1]	2156	ENDIF
	2157
	2158	END SELECT
	2159	!
	2160	!-- Check to which of the predefined coordinate systems the profile belongs
	2161	DO k = 1, crmax
	2162	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2163	/=0 ) &
	2164	THEN
	2165	dopr_crossindex(i) = k
	2166	EXIT
	2167	ENDIF
	2168	ENDDO
	2169	!
	2170	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2171	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2172	!-- control characters
	2173	dopr_label(i) = data_output_pr(i)
	2174	position = INDEX( dopr_label(i) , '"' )
	2175	DO WHILE ( position /= 0 )
	2176	dopr_label(i)(position:position) = ''''
	2177	position = INDEX( dopr_label(i) , '"' )
	2178	ENDDO
	2179
	2180	ENDDO
	2181
	2182	!
	2183	!-- y-value range of the coordinate system (PROFIL).
	2184	!-- x-value range determined in plot_1d.
[94]	2185	IF ( .NOT. ocean ) THEN
	2186	cross_uymin = 0.0
	2187	IF ( z_max_do1d == -1.0 ) THEN
	2188	cross_uymax = zu(nzt+1)
	2189	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2190	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2191	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2192	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2193	ELSE
	2194	cross_uymax = z_max_do1d
	2195	ENDIF
[1]	2196	ENDIF
	2197
	2198	!
	2199	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2200	!-- permissible
	2201	DO i = 1, crmax
	2202	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2203
	2204	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2205	j = 0
	2206
	2207	CASE DEFAULT
[215]	2208	message_string = 'unknown normalization method cross_normali' // &
	2209	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2210	'"'
[226]	2211	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2212
	2213	END SELECT
	2214	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2215
	2216	CASE ( '', 'z_i' )
	2217	j = 0
	2218
	2219	CASE DEFAULT
[215]	2220	message_string = 'unknown normalization method cross_normali' // &
	2221	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2222	'"'
[226]	2223	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2224
	2225	END SELECT
	2226	ENDDO
	2227	!
	2228	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2229	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2230	THEN
[215]	2231	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2232	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2233	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2234	ENDIF
	2235
	2236
	2237	!
	2238	!-- Append user-defined data output variables to the standard data output
	2239	IF ( data_output_user(1) /= ' ' ) THEN
	2240	i = 1
	2241	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2242	i = i + 1
	2243	ENDDO
	2244	j = 1
	2245	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2246	IF ( i > 100 ) THEN
[215]	2247	message_string = 'number of output quantitities given by data' // &
	2248	'_output and data_output_user exceeds the limit of 100'
[226]	2249	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2250	ENDIF
	2251	data_output(i) = data_output_user(j)
	2252	i = i + 1
	2253	j = j + 1
	2254	ENDDO
	2255	ENDIF
	2256
	2257	!
	2258	!-- Check and set steering parameters for 2d/3d data output and averaging
	2259	i = 1
	2260	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2261	!
	2262	!-- Check for data averaging
	2263	ilen = LEN_TRIM( data_output(i) )
	2264	j = 0 ! no data averaging
	2265	IF ( ilen > 3 ) THEN
	2266	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2267	j = 1 ! data averaging
	2268	data_output(i) = data_output(i)(1:ilen-3)
	2269	ENDIF
	2270	ENDIF
	2271	!
	2272	!-- Check for cross section or volume data
	2273	ilen = LEN_TRIM( data_output(i) )
	2274	k = 0 ! 3d data
	2275	var = data_output(i)(1:ilen)
	2276	IF ( ilen > 3 ) THEN
	2277	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2278	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2279	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2280	k = 1 ! 2d data
	2281	var = data_output(i)(1:ilen-3)
	2282	ENDIF
	2283	ENDIF
	2284	!
	2285	!-- Check for allowed value and set units
	2286	SELECT CASE ( TRIM( var ) )
	2287
	2288	CASE ( 'e' )
	2289	IF ( constant_diffusion ) THEN
[215]	2290	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2291	'res constant_diffusion = .FALSE.'
[226]	2292	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2293	ENDIF
	2294	unit = 'm2/s2'
	2295
	2296	CASE ( 'pc', 'pr' )
	2297	IF ( .NOT. particle_advection ) THEN
[215]	2298	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2299	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2300	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2301	ENDIF
	2302	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2303	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2304
	2305	CASE ( 'q', 'vpt' )
[75]	2306	IF ( .NOT. humidity ) THEN
[215]	2307	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2308	'res humidity = .TRUE.'
[226]	2309	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2310	ENDIF
	2311	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2312	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2313
	2314	CASE ( 'ql' )
	2315	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2316	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2317	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2318	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2319	ENDIF
	2320	unit = 'kg/kg'
	2321
	2322	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2323	IF ( .NOT. cloud_droplets ) THEN
[215]	2324	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2325	'res cloud_droplets = .TRUE.'
[226]	2326	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2327	ENDIF
	2328	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2329	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2330	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2331
	2332	CASE ( 'qv' )
	2333	IF ( .NOT. cloud_physics ) THEN
[215]	2334	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2335	'res cloud_physics = .TRUE.'
[226]	2336	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2337	ENDIF
	2338	unit = 'kg/kg'
	2339
[96]	2340	CASE ( 'rho' )
	2341	IF ( .NOT. ocean ) THEN
[215]	2342	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2343	'res ocean = .TRUE.'
[226]	2344	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2345	ENDIF
	2346	unit = 'kg/m3'
	2347
[1]	2348	CASE ( 's' )
	2349	IF ( .NOT. passive_scalar ) THEN
[215]	2350	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2351	'res passive_scalar = .TRUE.'
[226]	2352	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2353	ENDIF
	2354	unit = 'conc'
	2355
[96]	2356	CASE ( 'sa' )
	2357	IF ( .NOT. ocean ) THEN
[215]	2358	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2359	'res ocean = .TRUE.'
[226]	2360	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2361	ENDIF
	2362	unit = 'psu'
	2363
[72]	2364	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2365	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2366	message_string = 'illegal value for data_output: "' // &
	2367	TRIM( var ) // '" & only 2d-horizontal ' // &
	2368	'cross sections are allowed for this value'
[226]	2369	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2370	ENDIF
	2371	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2372	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2373	'res cloud_physics = .TRUE.'
[226]	2374	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2375	ENDIF
[72]	2376	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2377	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2378	'res precipitation = .TRUE.'
[226]	2379	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2380	ENDIF
	2381	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2382	message_string = 'temporal averaging of precipitation ' // &
	2383	'amount "' // TRIM( var ) // '" is not possible'
[226]	2384	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2385	ENDIF
	2386	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2388	'res precipitation = .TRUE.'
[226]	2389	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2390	ENDIF
	2391
	2392
[1]	2393	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2394	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2395	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2396	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2397	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2398	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2399
	2400	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2401	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2402	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2403	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2404	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2405	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2406	CONTINUE
	2407
	2408	CASE DEFAULT
	2409	CALL user_check_data_output( var, unit )
	2410
	2411	IF ( unit == 'illegal' ) THEN
[215]	2412	IF ( data_output_user(1) /= ' ' ) THEN
	2413	message_string = 'illegal value for data_output or ' // &
	2414	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2415	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2416	ELSE
	2417	message_string = 'illegal value for data_output =' // &
	2418	TRIM( data_output(i) ) // '"'
[226]	2419	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2420	ENDIF
	2421	ENDIF
	2422
	2423	END SELECT
	2424	!
	2425	!-- Set the internal steering parameters appropriately
	2426	IF ( k == 0 ) THEN
	2427	do3d_no(j) = do3d_no(j) + 1
	2428	do3d(j,do3d_no(j)) = data_output(i)
	2429	do3d_unit(j,do3d_no(j)) = unit
	2430	ELSE
	2431	do2d_no(j) = do2d_no(j) + 1
	2432	do2d(j,do2d_no(j)) = data_output(i)
	2433	do2d_unit(j,do2d_no(j)) = unit
	2434	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2435	data_output_xy(j) = .TRUE.
	2436	ENDIF
	2437	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2438	data_output_xz(j) = .TRUE.
	2439	ENDIF
	2440	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2441	data_output_yz(j) = .TRUE.
	2442	ENDIF
	2443	ENDIF
	2444
	2445	IF ( j == 1 ) THEN
	2446	!
	2447	!-- Check, if variable is already subject to averaging
	2448	found = .FALSE.
	2449	DO k = 1, doav_n
	2450	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2451	ENDDO
	2452
	2453	IF ( .NOT. found ) THEN
	2454	doav_n = doav_n + 1
	2455	doav(doav_n) = var
	2456	ENDIF
	2457	ENDIF
	2458
	2459	i = i + 1
	2460	ENDDO
	2461
	2462	!
[308]	2463	!-- Check sectional planes and store them in one shared array
	2464	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2465	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2466	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2467	ENDIF
	2468	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2469	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2470	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2471	ENDIF
	2472	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2473	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2474	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2475	ENDIF
[1]	2476	section(:,1) = section_xy
	2477	section(:,2) = section_xz
	2478	section(:,3) = section_yz
	2479
	2480	!
	2481	!-- Upper plot limit (grid point value) for 1D profiles
	2482	IF ( z_max_do1d == -1.0 ) THEN
	2483	nz_do1d = nzt+1
	2484	ELSE
	2485	DO k = nzb+1, nzt+1
	2486	nz_do1d = k
	2487	IF ( zw(k) > z_max_do1d ) EXIT
	2488	ENDDO
	2489	ENDIF
	2490
	2491	!
	2492	!-- Upper plot limit for 2D vertical sections
	2493	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2494	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2495	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2496	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2497	' (zu(nzt))'
[226]	2498	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2499	ENDIF
	2500
	2501	!
	2502	!-- Upper plot limit for 3D arrays
	2503	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2504
	2505	!
	2506	!-- Determine and check accuracy for compressed 3D plot output
	2507	IF ( do3d_compress ) THEN
	2508	!
	2509	!-- Compression only permissible on T3E machines
	2510	IF ( host(1:3) /= 't3e' ) THEN
[215]	2511	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2512	TRIM( host ) // '"'
[226]	2513	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2514	ENDIF
	2515
	2516	i = 1
	2517	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2518
	2519	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2520	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2521	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2522	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2523	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2524	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2525	ENDIF
	2526
	2527	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2528	var = do3d_comp_prec(i)(1:ilen-1)
	2529
	2530	SELECT CASE ( var )
	2531
	2532	CASE ( 'u' )
	2533	j = 1
	2534	CASE ( 'v' )
	2535	j = 2
	2536	CASE ( 'w' )
	2537	j = 3
	2538	CASE ( 'p' )
	2539	j = 4
	2540	CASE ( 'pt' )
	2541	j = 5
	2542
	2543	CASE DEFAULT
[215]	2544	WRITE( message_string, * ) 'unknown variable "', &
	2545	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2546	i, ')'
[226]	2547	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2548
	2549	END SELECT
	2550
	2551	plot_3d_precision(j)%precision = prec
	2552	i = i + 1
	2553
	2554	ENDDO
	2555	ENDIF
	2556
	2557	!
	2558	!-- Check the data output format(s)
	2559	IF ( data_output_format(1) == ' ' ) THEN
	2560	!
	2561	!-- Default value
	2562	netcdf_output = .TRUE.
	2563	ELSE
	2564	i = 1
	2565	DO WHILE ( data_output_format(i) /= ' ' )
	2566
	2567	SELECT CASE ( data_output_format(i) )
	2568
	2569	CASE ( 'netcdf' )
	2570	netcdf_output = .TRUE.
	2571	CASE ( 'iso2d' )
	2572	iso2d_output = .TRUE.
	2573	CASE ( 'profil' )
	2574	profil_output = .TRUE.
	2575	CASE ( 'avs' )
	2576	avs_output = .TRUE.
	2577
	2578	CASE DEFAULT
[215]	2579	message_string = 'unknown value for data_output_format "' // &
	2580	TRIM( data_output_format(i) ) // '"'
[226]	2581	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2582
	2583	END SELECT
	2584
	2585	i = i + 1
	2586	IF ( i > 10 ) EXIT
	2587
	2588	ENDDO
	2589
	2590	ENDIF
	2591
	2592	!
	2593	!-- Check netcdf precison
	2594	ldum = .FALSE.
	2595	CALL define_netcdf_header( 'ch', ldum, 0 )
	2596
	2597	!
	2598	!-- Check, whether a constant diffusion coefficient shall be used
	2599	IF ( km_constant /= -1.0 ) THEN
	2600	IF ( km_constant < 0.0 ) THEN
[215]	2601	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2602	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2603	ELSE
	2604	IF ( prandtl_number < 0.0 ) THEN
[215]	2605	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2606	' < 0.0'
[226]	2607	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2608	ENDIF
	2609	constant_diffusion = .TRUE.
	2610
	2611	IF ( prandtl_layer ) THEN
[215]	2612	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2613	'value of km'
[226]	2614	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2615	ENDIF
	2616	ENDIF
	2617	ENDIF
	2618
	2619	!
	2620	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2621	!-- for the horizontal diffusivity used within the outflow damping layer,
	2622	!-- and check/set the width of the damping layer
	2623	IF ( bc_lr /= 'cyclic' ) THEN
	2624	IF ( km_damp_max == -1.0 ) THEN
	2625	km_damp_max = 0.5 * dx
	2626	ENDIF
	2627	IF ( outflow_damping_width == -1.0 ) THEN
	2628	outflow_damping_width = MIN( 20, nx/2 )
	2629	ENDIF
	2630	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2631	message_string = 'outflow_damping width out of range'
[226]	2632	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2633	ENDIF
	2634	ENDIF
	2635
	2636	IF ( bc_ns /= 'cyclic' ) THEN
	2637	IF ( km_damp_max == -1.0 ) THEN
	2638	km_damp_max = 0.5 * dy
	2639	ENDIF
	2640	IF ( outflow_damping_width == -1.0 ) THEN
	2641	outflow_damping_width = MIN( 20, ny/2 )
	2642	ENDIF
	2643	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2644	message_string = 'outflow_damping width out of range'
[226]	2645	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2646	ENDIF
	2647	ENDIF
	2648
	2649	!
	2650	!-- Check value range for rif
	2651	IF ( rif_min >= rif_max ) THEN
[215]	2652	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2653	'than rif_max = ', rif_max
[226]	2654	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2655	ENDIF
	2656
	2657	!
	2658	!-- Determine upper and lower hight level indices for random perturbations
[97]	2659	IF ( disturbance_level_b == -9999999.9 ) THEN
	2660	IF ( ocean ) THEN
	2661	disturbance_level_b = zu((nzt*2)/3)
	2662	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2663	ELSE
	2664	disturbance_level_b = zu(nzb+3)
	2665	disturbance_level_ind_b = nzb + 3
	2666	ENDIF
[1]	2667	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2668	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2669	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2670	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2671	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2672	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2673	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2674	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2675	ELSE
	2676	DO k = 3, nzt-2
	2677	IF ( disturbance_level_b <= zu(k) ) THEN
	2678	disturbance_level_ind_b = k
	2679	EXIT
	2680	ENDIF
	2681	ENDDO
	2682	ENDIF
	2683
[97]	2684	IF ( disturbance_level_t == -9999999.9 ) THEN
	2685	IF ( ocean ) THEN
	2686	disturbance_level_t = zu(nzt-3)
	2687	disturbance_level_ind_t = nzt - 3
	2688	ELSE
	2689	disturbance_level_t = zu(nzt/3)
	2690	disturbance_level_ind_t = nzt / 3
	2691	ENDIF
[1]	2692	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2693	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2694	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2695	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2696	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2697	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2698	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2699	disturbance_level_b
[226]	2700	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2701	ELSE
	2702	DO k = 3, nzt-2
	2703	IF ( disturbance_level_t <= zu(k) ) THEN
	2704	disturbance_level_ind_t = k
	2705	EXIT
	2706	ENDIF
	2707	ENDDO
	2708	ENDIF
	2709
	2710	!
	2711	!-- Check again whether the levels determined this way are ok.
	2712	!-- Error may occur at automatic determination and too few grid points in
	2713	!-- z-direction.
	2714	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2715	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2716	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2717	disturbance_level_b
[226]	2718	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2719	ENDIF
	2720
	2721	!
	2722	!-- Determine the horizontal index range for random perturbations.
	2723	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2724	!-- near the inflow and the perturbation area is further limited to ...(1)
	2725	!-- after the initial phase of the flow.
	2726	dist_nxl = 0; dist_nxr = nx
	2727	dist_nys = 0; dist_nyn = ny
	2728	IF ( bc_lr /= 'cyclic' ) THEN
	2729	IF ( inflow_disturbance_begin == -1 ) THEN
	2730	inflow_disturbance_begin = MIN( 10, nx/2 )
	2731	ENDIF
	2732	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2733	THEN
[215]	2734	message_string = 'inflow_disturbance_begin out of range'
[226]	2735	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2736	ENDIF
	2737	IF ( inflow_disturbance_end == -1 ) THEN
	2738	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2739	ENDIF
	2740	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2741	THEN
[215]	2742	message_string = 'inflow_disturbance_end out of range'
[226]	2743	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2744	ENDIF
	2745	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2746	IF ( inflow_disturbance_begin == -1 ) THEN
	2747	inflow_disturbance_begin = MIN( 10, ny/2 )
	2748	ENDIF
	2749	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2750	THEN
[215]	2751	message_string = 'inflow_disturbance_begin out of range'
[226]	2752	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2753	ENDIF
	2754	IF ( inflow_disturbance_end == -1 ) THEN
	2755	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2756	ENDIF
	2757	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2758	THEN
[215]	2759	message_string = 'inflow_disturbance_end out of range'
[226]	2760	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2761	ENDIF
	2762	ENDIF
	2763
[73]	2764	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2765	dist_nxr = nx - inflow_disturbance_begin
	2766	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2767	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2768	dist_nxl = inflow_disturbance_begin
	2769	dist_nxr(1) = inflow_disturbance_end
[73]	2770	ENDIF
	2771	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2772	dist_nyn = ny - inflow_disturbance_begin
	2773	dist_nys(1) = ny - inflow_disturbance_end
[73]	2774	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2775	dist_nys = inflow_disturbance_begin
	2776	dist_nyn(1) = inflow_disturbance_end
	2777	ENDIF
	2778
	2779	!
[151]	2780	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2781	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2782	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2783	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2784	'condition at the inflow boundary'
[226]	2785	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2786	ENDIF
	2787
	2788	!
	2789	!-- In case of turbulent inflow calculate the index of the recycling plane
	2790	IF ( turbulent_inflow ) THEN
	2791	IF ( recycling_width == 9999999.9 ) THEN
	2792	!
	2793	!-- Set the default value for the width of the recycling domain
	2794	recycling_width = 0.1 * nx * dx
	2795	ELSE
	2796	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2797	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2798	' ', recycling_width
[226]	2799	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2800	ENDIF
	2801	ENDIF
	2802	!
	2803	!-- Calculate the index
	2804	recycling_plane = recycling_width / dx
	2805	ENDIF
	2806
	2807	!
[1]	2808	!-- Check random generator
	2809	IF ( random_generator /= 'system-specific' .AND. &
	2810	random_generator /= 'numerical-recipes' ) THEN
[215]	2811	message_string = 'unknown random generator: random_generator = "' // &
	2812	TRIM( random_generator ) // '"'
[226]	2813	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2814	ENDIF
	2815
	2816	!
	2817	!-- Determine damping level index for 1D model
	2818	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2819	IF ( damp_level_1d == -1.0 ) THEN
	2820	damp_level_1d = zu(nzt+1)
	2821	damp_level_ind_1d = nzt + 1
	2822	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2823	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2824	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2825	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2826	ELSE
	2827	DO k = 1, nzt+1
	2828	IF ( damp_level_1d <= zu(k) ) THEN
	2829	damp_level_ind_1d = k
	2830	EXIT
	2831	ENDIF
	2832	ENDDO
	2833	ENDIF
	2834	ENDIF
[215]	2835
[1]	2836	!
	2837	!-- Check some other 1d-model parameters
	2838	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2839	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2840	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2841	'" is unknown'
[226]	2842	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2843	ENDIF
	2844	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2845	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2846	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2847	'" is unknown'
[226]	2848	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2849	ENDIF
	2850
	2851	!
	2852	!-- Set time for the next user defined restart (time_restart is the
	2853	!-- internal parameter for steering restart events)
	2854	IF ( restart_time /= 9999999.9 ) THEN
[291]	2855	IF ( restart_time > time_since_reference_point ) THEN
	2856	time_restart = restart_time
	2857	ENDIF
[1]	2858	ELSE
	2859	!
	2860	!-- In case of a restart run, set internal parameter to default (no restart)
	2861	!-- if the NAMELIST-parameter restart_time is omitted
	2862	time_restart = 9999999.9
	2863	ENDIF
	2864
	2865	!
	2866	!-- Set default value of the time needed to terminate a model run
	2867	IF ( termination_time_needed == -1.0 ) THEN
	2868	IF ( host(1:3) == 'ibm' ) THEN
	2869	termination_time_needed = 300.0
	2870	ELSE
	2871	termination_time_needed = 35.0
	2872	ENDIF
	2873	ENDIF
	2874
	2875	!
	2876	!-- Check the time needed to terminate a model run
	2877	IF ( host(1:3) == 't3e' ) THEN
	2878	!
	2879	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2880	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2881	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2882	WRITE( message_string, * ) 'termination_time_needed = ', &
	2883	termination_time_needed, ' must be > 30.0 on host "', &
	2884	TRIM( host ), '"'
[226]	2885	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2886	ENDIF
	2887	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2888	!
	2889	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2890	!-- because the job time consumed before executing palm (for compiling,
	2891	!-- copying of files, etc.) has to be regarded
	2892	IF ( termination_time_needed < 300.0 ) THEN
[215]	2893	WRITE( message_string, * ) 'termination_time_needed = ', &
	2894	termination_time_needed, ' should be >= 300.0 on host "', &
	2895	TRIM( host ), '"'
[226]	2896	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2897	ENDIF
	2898	ENDIF
	2899
[217]	2900	!
[240]	2901	!-- Check pressure gradient conditions
	2902	IF ( dp_external .AND. conserve_volume_flow ) THEN
	2903	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
	2904	' are .TRUE. but one of them must be .FALSE.'
	2905	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	2906	ENDIF
	2907	IF ( dp_external ) THEN
	2908	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	2909	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	2910	' of range'
	2911	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	2912	ENDIF
	2913	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
	2914	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
	2915	', i.e. the external pressure gradient & will not be applied'
	2916	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	2917	ENDIF
	2918	ENDIF
	2919	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	2920	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	2921	'.FALSE., i.e. the external pressure gradient & will not be applied'
	2922	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	2923	ENDIF
[241]	2924	IF ( conserve_volume_flow ) THEN
	2925	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	2926	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	2927	conserve_volume_flow_mode = 'inflow_profile'
	2928	ELSE
	2929	conserve_volume_flow_mode = 'initial_profiles'
	2930	ENDIF
	2931	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	2932	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	2933	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	2934	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	2935	conserve_volume_flow_mode
	2936	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	2937	ENDIF
	2938	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	2939	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	2940	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	2941	'require & conserve_volume_flow_mode = ''inflow_profile'''
	2942	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	2943	ENDIF
	2944	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	2945	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	2946	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	2947	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	2948	' or ''bulk_velocity'''
	2949	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	2950	ENDIF
	2951	ENDIF
	2952	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	2953	( .NOT. conserve_volume_flow .OR. &
	2954	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	2955	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	2956	'conserve_volume_flow = .T. and & ', &
	2957	'conserve_volume_flow_mode = ''bulk_velocity'''
	2958	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	2959	ENDIF
[240]	2960
	2961	!
[264]	2962	!-- Check particle attributes
	2963	IF ( particle_color /= 'none' ) THEN
	2964	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	2965	particle_color /= 'z' ) THEN
	2966	message_string = 'illegal value for parameter particle_color: ' // &
	2967	TRIM( particle_color)
	2968	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	2969	ELSE
	2970	IF ( color_interval(2) <= color_interval(1) ) THEN
	2971	message_string = 'color_interval(2) <= color_interval(1)'
	2972	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	2973	ENDIF
	2974	ENDIF
	2975	ENDIF
	2976
	2977	IF ( particle_dvrpsize /= 'none' ) THEN
	2978	IF ( particle_dvrpsize /= 'absw' ) THEN
	2979	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	2980	' ' // TRIM( particle_color)
	2981	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	2982	ELSE
	2983	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	2984	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	2985	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	2986	ENDIF
	2987	ENDIF
	2988	ENDIF
	2989
	2990	!
[217]	2991	!-- Check &userpar parameters
	2992	CALL user_check_parameters
[1]	2993
[217]	2994
[1]	2995	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |