Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 331

Last change on this file since 331 was 328, checked in by letzel, 15 years ago
initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now independent of turbulent_inflow (check_parameters, header, init_3d_model)
Property svn:keywords set to `Id`
File size: 117.5 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
7	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
8	! Coupling with independent precursor runs.
9	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
10	! Bugfix: pressure included for profile output
11	! Check pressure gradient conditions
12	! topography_grid_convention moved from user_check_parameters
13	! 'single_street_canyon'
14	!
15	! Former revisions:
16	! -----------------
17	! $Id: check_parameters.f90 328 2009-05-28 12:13:56Z raasch $
18	!
19	! 222 2009-01-12 16:04:16Z letzel
20	! +user_check_parameters
21	! Output of messages replaced by message handling routine.
22	! Implementation of an MPI-1 coupling: replaced myid with target_id,
23	! deleted __mpi2 directives
24	! Check that PALM is called with mrun -K parallel for coupling
25	!
26	! 197 2008-09-16 15:29:03Z raasch
27	! Bug fix: Construction of vertical profiles when 10 gradients have been
28	! specified in the parameter list (ug, vg, pt, q, sa, lad)
29	!
30	! Strict grid matching along z is not needed for mg-solver.
31	! Leaf area density (LAD) explicitly set to its surface value at k=0
32	! Case of reading data for recycling included in initializing_actions,
33	! check of turbulent_inflow and calculation of recycling_plane.
34	! q*2 profile added
35	!
36	! 138 2007-11-28 10:03:58Z letzel
37	! Plant canopy added
38	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
39	! Multigrid solver allows topography, checking of dt_sort_particles
40	! Bugfix: initializing u_init and v_init in case of ocean runs
41	!
42	! 109 2007-08-28 15:26:47Z letzel
43	! Check coupling_mode and set default (obligatory) values (like boundary
44	! conditions for temperature and fluxes) in case of coupled runs.
45	! +profiles for wp and w"e
46	! Bugfix: Error message concerning output of particle concentration (pc)
47	! modified
48	! More checks and more default values for coupled runs
49	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
50	! cloud_physics = .T.)
51	! Rayleigh damping for ocean fixed.
52	! Check and, if necessary, set default value for dt_coupling
53	!
54	! 97 2007-06-21 08:23:15Z raasch
55	! Initial salinity profile is calculated, salinity boundary conditions are
56	! checked,
57	! z_max_do1d is checked only in case of ocean = .f.,
58	! +initial temperature and geostrophic velocity profiles for the ocean version,
59	! use_pt_reference renamed use_reference
60	!
61	! 89 2007-05-25 12:08:31Z raasch
62	! Check for user-defined profiles
63	!
64	! 75 2007-03-22 09:54:05Z raasch
65	! "by_user" allowed as initializing action, -data_output_ts,
66	! leapfrog with non-flat topography not allowed any more, loop_optimization
67	! and pt_reference are checked, moisture renamed humidity,
68	! output of precipitation amount/rate and roughnes length + check
69	! possible negative humidities are avoided in initial profile,
70	! dirichlet/neumann changed to dirichlet/radiation, etc.,
71	! revision added to run_description_header
72	!
73	! 20 2007-02-26 00:12:32Z raasch
74	! Temperature and humidity gradients at top are now calculated for nzt+1,
75	! top_heatflux and respective boundary condition bc_pt_t is checked
76	!
77	! RCS Log replace by Id keyword, revision history cleaned up
78	!
79	! Revision 1.61 2006/08/04 14:20:25 raasch
80	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
81	! use_upstream_for_tke, default value for dt_dopts,
82	! generation of file header moved from routines palm and header to here
83	!
84	! Revision 1.1 1997/08/26 06:29:23 raasch
85	! Initial revision
86	!
87	!
88	! Description:
89	! ------------
90	! Check control parameters and deduce further quantities.
91	!------------------------------------------------------------------------------!
92
93	USE arrays_3d
94	USE constants
95	USE control_parameters
96	USE dvrp_variables
97	USE grid_variables
98	USE indices
99	USE model_1d
100	USE netcdf_control
101	USE particle_attributes
102	USE pegrid
103	USE profil_parameter
104	USE statistics
105	USE transpose_indices
106
107	IMPLICIT NONE
108
109	CHARACTER (LEN=1) :: sq
110	CHARACTER (LEN=6) :: var
111	CHARACTER (LEN=7) :: unit
112	CHARACTER (LEN=8) :: date
113	CHARACTER (LEN=10) :: time
114	CHARACTER (LEN=40) :: coupling_string
115	CHARACTER (LEN=100) :: action
116
117	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
118	position, prec
119	LOGICAL :: found, ldum
120	REAL :: gradient, maxn, maxp, remote = 0.0, &
121	simulation_time_since_reference
122
123	!
124	!-- Warning, if host is not set
125	IF ( host(1:1) == ' ' ) THEN
126	message_string = '"host" is not set. Please check that environment ' // &
127	'variable "localhost" & is set before running PALM'
128	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
129	ENDIF
130
131	!
132	!-- Check the coupling mode
133	IF ( coupling_mode /= 'uncoupled' .AND. &
134	coupling_mode /= 'atmosphere_to_ocean' .AND. &
135	coupling_mode /= 'ocean_to_atmosphere' ) THEN
136	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
137	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
138	ENDIF
139
140	!
141	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
142	IF ( coupling_mode /= 'uncoupled' ) THEN
143
144	IF ( dt_coupling == 9999999.9 ) THEN
145	message_string = 'dt_coupling is not set but required for coup' // &
146	'ling mode "' // TRIM( coupling_mode ) // '"'
147	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
148	ENDIF
149
150	#if defined( __parallel )
151	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
152	ierr )
153	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
154	status, ierr )
155	IF ( dt_coupling /= remote ) THEN
156	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
157	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
158	'dt_coupling_remote = ', remote
159	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
160	ENDIF
161	IF ( dt_coupling <= 0.0 ) THEN
162	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
163	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
164	status, ierr )
165	dt_coupling = MAX( dt_max, remote )
166	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
167	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
168	'MAX(dt_max(A,O)) = ', dt_coupling
169	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
170	ENDIF
171
172	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
173	ierr )
174	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
175	status, ierr )
176	IF ( restart_time /= remote ) THEN
177	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
178	'": restart_time = ', restart_time, '& is not equal to ', &
179	'restart_time_remote = ', remote
180	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
181	ENDIF
182
183	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
184	ierr )
185	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
186	status, ierr )
187	IF ( dt_restart /= remote ) THEN
188	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
189	'": dt_restart = ', dt_restart, '& is not equal to ', &
190	'dt_restart_remote = ', remote
191	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
192	ENDIF
193
194	simulation_time_since_reference = end_time - coupling_start_time
195	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
196	14, comm_inter, ierr )
197	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
198	status, ierr )
199	IF ( simulation_time_since_reference /= remote ) THEN
200	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
201	'": simulation_time_since_reference = ', &
202	simulation_time_since_reference, '& is not equal to ', &
203	'simulation_time_since_reference_remote = ', remote
204	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
205	ENDIF
206
207	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
208	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
209	status, ierr )
210	IF ( dx /= remote ) THEN
211	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
212	'": dx = ', dx, '& is not equal to dx_remote = ', remote
213	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
214	ENDIF
215
216	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
217	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
218	status, ierr )
219	IF ( dy /= remote ) THEN
220	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
221	'": dy = ', dy, '& is not equal to dy_remote = ', remote
222	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
223	ENDIF
224
225	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
227	status, ierr )
228	IF ( nx /= iremote ) THEN
229	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
230	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
231	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
232	ENDIF
233
234	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
235	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
236	status, ierr )
237	IF ( ny /= iremote ) THEN
238	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
239	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
240	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
241	ENDIF
242	#else
243	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
244	' ''mrun -K parallel'''
245	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
246	#endif
247	ENDIF
248
249	#if defined( __parallel )
250	!
251	!-- Exchange via intercommunicator
252	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
253	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
254	ierr )
255	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
256	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
257	comm_inter, status, ierr )
258	ENDIF
259	#endif
260
261
262	!
263	!-- Generate the file header which is used as a header for most of PALM's
264	!-- output files
265	CALL DATE_AND_TIME( date, time )
266	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
267	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
268	IF ( coupling_mode == 'uncoupled' ) THEN
269	coupling_string = ''
270	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
271	coupling_string = ' coupled (atmosphere)'
272	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
273	coupling_string = ' coupled (ocean)'
274	ENDIF
275
276	WRITE ( run_description_header, &
277	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
278	TRIM( version ), TRIM( revision ), 'run: ', &
279	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
280	'host: ', TRIM( host ), run_date, run_time
281
282	!
283	!-- Check the general loop optimization method
284	IF ( loop_optimization == 'default' ) THEN
285	IF ( host(1:3) == 'nec' ) THEN
286	loop_optimization = 'vector'
287	ELSE
288	loop_optimization = 'cache'
289	ENDIF
290	ENDIF
291	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
292	.AND. loop_optimization /= 'vector' ) THEN
293	message_string = 'illegal value given for loop_optimization: "' // &
294	TRIM( loop_optimization ) // '"'
295	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
296	ENDIF
297
298	!
299	!-- Check topography setting (check for illegal parameter combinations)
300	IF ( topography /= 'flat' ) THEN
301	action = ' '
302	IF ( scalar_advec /= 'pw-scheme' ) THEN
303	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
304	ENDIF
305	IF ( momentum_advec /= 'pw-scheme' ) THEN
306	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
307	ENDIF
308	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
309	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
310	ENDIF
311	IF ( psolver == 'sor' ) THEN
312	WRITE( action, '(A,A)' ) 'psolver = ', psolver
313	ENDIF
314	IF ( sloping_surface ) THEN
315	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
316	ENDIF
317	IF ( galilei_transformation ) THEN
318	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
319	ENDIF
320	IF ( cloud_physics ) THEN
321	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
322	ENDIF
323	IF ( cloud_droplets ) THEN
324	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
325	ENDIF
326	IF ( humidity ) THEN
327	WRITE( action, '(A)' ) 'humidity = .TRUE.'
328	ENDIF
329	IF ( .NOT. prandtl_layer ) THEN
330	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
331	ENDIF
332	IF ( action /= ' ' ) THEN
333	message_string = 'a non-flat topography does not allow ' // &
334	TRIM( action )
335	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
336	ENDIF
337	!
338	!-- In case of non-flat topography, check whether the convention how to
339	!-- define the topography grid has been set correctly, or whether the default
340	!-- is applicable. If this is not possible, abort.
341	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
342	IF ( TRIM( topography ) /= 'single_building' .AND. &
343	TRIM( topography ) /= 'single_street_canyon' .AND. &
344	TRIM( topography ) /= 'read_from_file' ) THEN
345	!-- The default value is not applicable here, because it is only valid
346	!-- for the two standard cases 'single_building' and 'read_from_file'
347	!-- defined in init_grid.
348	WRITE( message_string, * ) &
349	'The value for "topography_grid_convention" ', &
350	'is not set. Its default value is & only valid for ', &
351	'"topography" = ''single_building'', ', &
352	'''single_street_canyon'' & or ''read_from_file''.', &
353	' & Choose ''cell_edge'' or ''cell_center''.'
354	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
355	ELSE
356	!-- The default value is applicable here.
357	!-- Set convention according to topography.
358	IF ( TRIM( topography ) == 'single_building' .OR. &
359	TRIM( topography ) == 'single_street_canyon' ) THEN
360	topography_grid_convention = 'cell_edge'
361	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
362	topography_grid_convention = 'cell_center'
363	ENDIF
364	ENDIF
365	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
366	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
367	WRITE( message_string, * ) &
368	'The value for "topography_grid_convention" is ', &
369	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
370	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
371	ENDIF
372
373	ENDIF
374
375	!
376	!-- Check ocean setting
377	IF ( ocean ) THEN
378	action = ' '
379	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
380	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
381	ENDIF
382	IF ( momentum_advec == 'ups-scheme' ) THEN
383	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
384	ENDIF
385	IF ( action /= ' ' ) THEN
386	message_string = 'ocean = .T. does not allow ' // TRIM( action )
387	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
388	ENDIF
389	ENDIF
390
391	!
392	!-- Check whether an (uncoupled) atmospheric run has been declared as an
393	!-- ocean run (this setting is done via mrun-option -y)
394	IF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
395	TRIM( coupling_char ) == '_O' ) THEN
396	message_string = 'ocean = .F. does not allow coupling_char = "' // &
397	TRIM( coupling_char ) // '" set by mrun-option "-y"'
398	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
399	ENDIF
400
401	!
402	!-- Check whether there are any illegal values
403	!-- Pressure solver:
404	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
405	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
406	message_string = 'unknown solver for perturbation pressure: psolver' // &
407	' = "' // TRIM( psolver ) // '"'
408	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
409	ENDIF
410
411	#if defined( __parallel )
412	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
413	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
414	'for a 1d domain-decomposition along x & please do' // &
415	' not set npey/=1 in the parameter file'
416	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
417	ENDIF
418	IF ( psolver == 'poisfft_hybrid' .AND. &
419	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
420	psolver == 'multigrid' .AND. &
421	( nxra > nxr .OR. nyna > nyn ) ) THEN
422	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
423	'work for subdomains with unequal size & please ' // &
424	'set grid_matching = ''strict'' in the parameter file'
425	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
426	ENDIF
427	#else
428	IF ( psolver == 'poisfft_hybrid' ) THEN
429	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
430	' for a parallel environment'
431	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
432	ENDIF
433	#endif
434
435	IF ( psolver == 'multigrid' ) THEN
436	IF ( cycle_mg == 'w' ) THEN
437	gamma_mg = 2
438	ELSEIF ( cycle_mg == 'v' ) THEN
439	gamma_mg = 1
440	ELSE
441	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
442	TRIM( cycle_mg ) // '"'
443	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
444	ENDIF
445	ENDIF
446
447	IF ( fft_method /= 'singleton-algorithm' .AND. &
448	fft_method /= 'temperton-algorithm' .AND. &
449	fft_method /= 'system-specific' ) THEN
450	message_string = 'unknown fft-algorithm: fft_method = "' // &
451	TRIM( fft_method ) // '"'
452	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
453	ENDIF
454
455	!
456	!-- Advection schemes:
457	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
458	THEN
459	message_string = 'unknown advection scheme: momentum_advec = "' // &
460	TRIM( momentum_advec ) // '"'
461	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
462	ENDIF
463	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
464	.AND. timestep_scheme /= 'euler' ) THEN
465	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
466	'" is not allowed with timestep_scheme = "' // &
467	TRIM( timestep_scheme ) // '"'
468	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
469	ENDIF
470
471	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
472	scalar_advec /= 'ups-scheme' ) THEN
473	message_string = 'unknown advection scheme: scalar_advec = "' // &
474	TRIM( scalar_advec ) // '"'
475	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
476	ENDIF
477
478	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
479	use_upstream_for_tke = .TRUE.
480	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
481	'use_sgs_for_particles = .TRUE.'
482	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
483	ENDIF
484
485	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
486	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
487	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
488	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
489	ENDIF
490
491	!
492	!-- Timestep schemes:
493	SELECT CASE ( TRIM( timestep_scheme ) )
494
495	CASE ( 'euler' )
496	intermediate_timestep_count_max = 1
497	asselin_filter_factor = 0.0
498
499	CASE ( 'leapfrog', 'leapfrog+euler' )
500	intermediate_timestep_count_max = 1
501
502	CASE ( 'runge-kutta-2' )
503	intermediate_timestep_count_max = 2
504	asselin_filter_factor = 0.0
505
506	CASE ( 'runge-kutta-3' )
507	intermediate_timestep_count_max = 3
508	asselin_filter_factor = 0.0
509
510	CASE DEFAULT
511	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
512	TRIM( timestep_scheme ) // '"'
513	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
514
515	END SELECT
516
517	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
518	THEN
519	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
520	'" & does not work with timestep_scheme "' // &
521	TRIM( timestep_scheme ) // '"'
522	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
523	ENDIF
524
525	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
526	THEN
527	message_string = 'momentum advection scheme "' // &
528	TRIM( momentum_advec ) // '" & does not work with ' // &
529	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
530	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
531	ENDIF
532
533	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
534	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
535	!
536	!-- No restart run: several initialising actions are possible
537	action = initializing_actions
538	DO WHILE ( TRIM( action ) /= '' )
539	position = INDEX( action, ' ' )
540	SELECT CASE ( action(1:position-1) )
541
542	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
543	'by_user', 'initialize_vortex', 'initialize_ptanom' )
544	action = action(position+1:)
545
546	CASE DEFAULT
547	message_string = 'initializing_action = "' // &
548	TRIM( action ) // '" unkown or not allowed'
549	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
550
551	END SELECT
552	ENDDO
553	ENDIF
554
555	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
556	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
557	message_string = 'initializing_actions = "set_constant_profiles"' // &
558	' and "set_1d-model_profiles" are not allowed ' // &
559	'simultaneously'
560	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
561	ENDIF
562
563	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
564	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
565	message_string = 'initializing_actions = "set_constant_profiles"' // &
566	' and "by_user" are not allowed simultaneously'
567	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
568	ENDIF
569
570	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
571	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
572	message_string = 'initializing_actions = "by_user" and ' // &
573	'"set_1d-model_profiles" are not allowed simultaneously'
574	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
575	ENDIF
576
577	IF ( cloud_physics .AND. .NOT. humidity ) THEN
578	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
579	'not allowed with humidity = ', humidity
580	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
581	ENDIF
582
583	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
584	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
585	'not allowed with cloud_physics = ', cloud_physics
586	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
587	ENDIF
588
589	IF ( humidity .AND. sloping_surface ) THEN
590	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
591	'are not allowed simultaneously'
592	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
593	ENDIF
594
595	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
596	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
597	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
598	ENDIF
599
600	IF ( passive_scalar .AND. humidity ) THEN
601	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
602	'is not allowed simultaneously'
603	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
604	ENDIF
605
606	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
607	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
608	' = .TRUE.'
609	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
610	ENDIF
611
612	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
613	message_string = 'illegal value "' // TRIM( grid_matching ) // &
614	'" found for parameter grid_matching'
615	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
616	ENDIF
617
618	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
619	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
620	'coefficient & given value is drag_coefficient = 0.0'
621	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
622	ENDIF
623
624	!
625	!-- In case of no model continuation run, check initialising parameters and
626	!-- deduce further quantities
627	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
628
629	!
630	!-- Initial profiles for 1D and 3D model, respectively
631	u_init = ug_surface
632	v_init = vg_surface
633	pt_init = pt_surface
634	IF ( humidity ) q_init = q_surface
635	IF ( ocean ) sa_init = sa_surface
636	IF ( passive_scalar ) q_init = s_surface
637	IF ( plant_canopy ) lad = 0.0
638
639	!
640	!--
641	!-- If required, compute initial profile of the geostrophic wind
642	!-- (component ug)
643	i = 1
644	gradient = 0.0
645
646	IF ( .NOT. ocean ) THEN
647
648	ug_vertical_gradient_level_ind(1) = 0
649	ug(0) = ug_surface
650	DO k = 1, nzt+1
651	IF ( i < 11 ) THEN
652	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
653	ug_vertical_gradient_level(i) >= 0.0 ) THEN
654	gradient = ug_vertical_gradient(i) / 100.0
655	ug_vertical_gradient_level_ind(i) = k - 1
656	i = i + 1
657	ENDIF
658	ENDIF
659	IF ( gradient /= 0.0 ) THEN
660	IF ( k /= 1 ) THEN
661	ug(k) = ug(k-1) + dzu(k) * gradient
662	ELSE
663	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
664	ENDIF
665	ELSE
666	ug(k) = ug(k-1)
667	ENDIF
668	ENDDO
669
670	ELSE
671
672	ug_vertical_gradient_level_ind(1) = nzt+1
673	ug(nzt+1) = ug_surface
674	DO k = nzt, 0, -1
675	IF ( i < 11 ) THEN
676	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
677	ug_vertical_gradient_level(i) <= 0.0 ) THEN
678	gradient = ug_vertical_gradient(i) / 100.0
679	ug_vertical_gradient_level_ind(i) = k + 1
680	i = i + 1
681	ENDIF
682	ENDIF
683	IF ( gradient /= 0.0 ) THEN
684	IF ( k /= nzt ) THEN
685	ug(k) = ug(k+1) - dzu(k+1) * gradient
686	ELSE
687	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
688	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
689	ENDIF
690	ELSE
691	ug(k) = ug(k+1)
692	ENDIF
693	ENDDO
694
695	ENDIF
696
697	u_init = ug
698
699	!
700	!-- In case of no given gradients for ug, choose a vanishing gradient
701	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
702	ug_vertical_gradient_level(1) = 0.0
703	ENDIF
704
705	!
706	!--
707	!-- If required, compute initial profile of the geostrophic wind
708	!-- (component vg)
709	i = 1
710	gradient = 0.0
711
712	IF ( .NOT. ocean ) THEN
713
714	vg_vertical_gradient_level_ind(1) = 0
715	vg(0) = vg_surface
716	DO k = 1, nzt+1
717	IF ( i < 11 ) THEN
718	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
719	vg_vertical_gradient_level(i) >= 0.0 ) THEN
720	gradient = vg_vertical_gradient(i) / 100.0
721	vg_vertical_gradient_level_ind(i) = k - 1
722	i = i + 1
723	ENDIF
724	ENDIF
725	IF ( gradient /= 0.0 ) THEN
726	IF ( k /= 1 ) THEN
727	vg(k) = vg(k-1) + dzu(k) * gradient
728	ELSE
729	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
730	ENDIF
731	ELSE
732	vg(k) = vg(k-1)
733	ENDIF
734	ENDDO
735
736	ELSE
737
738	vg_vertical_gradient_level_ind(1) = nzt+1
739	vg(nzt+1) = vg_surface
740	DO k = nzt, 0, -1
741	IF ( i < 11 ) THEN
742	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
743	vg_vertical_gradient_level(i) <= 0.0 ) THEN
744	gradient = vg_vertical_gradient(i) / 100.0
745	vg_vertical_gradient_level_ind(i) = k + 1
746	i = i + 1
747	ENDIF
748	ENDIF
749	IF ( gradient /= 0.0 ) THEN
750	IF ( k /= nzt ) THEN
751	vg(k) = vg(k+1) - dzu(k+1) * gradient
752	ELSE
753	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
754	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
755	ENDIF
756	ELSE
757	vg(k) = vg(k+1)
758	ENDIF
759	ENDDO
760
761	ENDIF
762
763	v_init = vg
764
765	!
766	!-- In case of no given gradients for vg, choose a vanishing gradient
767	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
768	vg_vertical_gradient_level(1) = 0.0
769	ENDIF
770
771	!
772	!-- Compute initial temperature profile using the given temperature gradients
773	i = 1
774	gradient = 0.0
775
776	IF ( .NOT. ocean ) THEN
777
778	pt_vertical_gradient_level_ind(1) = 0
779	DO k = 1, nzt+1
780	IF ( i < 11 ) THEN
781	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
782	pt_vertical_gradient_level(i) >= 0.0 ) THEN
783	gradient = pt_vertical_gradient(i) / 100.0
784	pt_vertical_gradient_level_ind(i) = k - 1
785	i = i + 1
786	ENDIF
787	ENDIF
788	IF ( gradient /= 0.0 ) THEN
789	IF ( k /= 1 ) THEN
790	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
791	ELSE
792	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
793	ENDIF
794	ELSE
795	pt_init(k) = pt_init(k-1)
796	ENDIF
797	ENDDO
798
799	ELSE
800
801	pt_vertical_gradient_level_ind(1) = nzt+1
802	DO k = nzt, 0, -1
803	IF ( i < 11 ) THEN
804	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
805	pt_vertical_gradient_level(i) <= 0.0 ) THEN
806	gradient = pt_vertical_gradient(i) / 100.0
807	pt_vertical_gradient_level_ind(i) = k + 1
808	i = i + 1
809	ENDIF
810	ENDIF
811	IF ( gradient /= 0.0 ) THEN
812	IF ( k /= nzt ) THEN
813	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
814	ELSE
815	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
816	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
817	ENDIF
818	ELSE
819	pt_init(k) = pt_init(k+1)
820	ENDIF
821	ENDDO
822
823	ENDIF
824
825	!
826	!-- In case of no given temperature gradients, choose gradient of neutral
827	!-- stratification
828	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
829	pt_vertical_gradient_level(1) = 0.0
830	ENDIF
831
832	!
833	!-- Store temperature gradient at the top boundary for possible Neumann
834	!-- boundary condition
835	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
836
837	!
838	!-- If required, compute initial humidity or scalar profile using the given
839	!-- humidity/scalar gradient. In case of scalar transport, initially store
840	!-- values of the scalar parameters on humidity parameters
841	IF ( passive_scalar ) THEN
842	bc_q_b = bc_s_b
843	bc_q_t = bc_s_t
844	q_surface = s_surface
845	q_surface_initial_change = s_surface_initial_change
846	q_vertical_gradient = s_vertical_gradient
847	q_vertical_gradient_level = s_vertical_gradient_level
848	surface_waterflux = surface_scalarflux
849	ENDIF
850
851	IF ( humidity .OR. passive_scalar ) THEN
852
853	i = 1
854	gradient = 0.0
855	q_vertical_gradient_level_ind(1) = 0
856	DO k = 1, nzt+1
857	IF ( i < 11 ) THEN
858	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
859	q_vertical_gradient_level(i) >= 0.0 ) THEN
860	gradient = q_vertical_gradient(i) / 100.0
861	q_vertical_gradient_level_ind(i) = k - 1
862	i = i + 1
863	ENDIF
864	ENDIF
865	IF ( gradient /= 0.0 ) THEN
866	IF ( k /= 1 ) THEN
867	q_init(k) = q_init(k-1) + dzu(k) * gradient
868	ELSE
869	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
870	ENDIF
871	ELSE
872	q_init(k) = q_init(k-1)
873	ENDIF
874	!
875	!-- Avoid negative humidities
876	IF ( q_init(k) < 0.0 ) THEN
877	q_init(k) = 0.0
878	ENDIF
879	ENDDO
880
881	!
882	!-- In case of no given humidity gradients, choose zero gradient
883	!-- conditions
884	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
885	q_vertical_gradient_level(1) = 0.0
886	ENDIF
887
888	!
889	!-- Store humidity gradient at the top boundary for possile Neumann
890	!-- boundary condition
891	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
892
893	ENDIF
894
895	!
896	!-- If required, compute initial salinity profile using the given salinity
897	!-- gradients
898	IF ( ocean ) THEN
899
900	i = 1
901	gradient = 0.0
902
903	sa_vertical_gradient_level_ind(1) = nzt+1
904	DO k = nzt, 0, -1
905	IF ( i < 11 ) THEN
906	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
907	sa_vertical_gradient_level(i) <= 0.0 ) THEN
908	gradient = sa_vertical_gradient(i) / 100.0
909	sa_vertical_gradient_level_ind(i) = k + 1
910	i = i + 1
911	ENDIF
912	ENDIF
913	IF ( gradient /= 0.0 ) THEN
914	IF ( k /= nzt ) THEN
915	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
916	ELSE
917	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
918	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
919	ENDIF
920	ELSE
921	sa_init(k) = sa_init(k+1)
922	ENDIF
923	ENDDO
924
925	ENDIF
926
927	!
928	!-- If required compute the profile of leaf area density used in the plant canopy model
929	IF ( plant_canopy ) THEN
930
931	i = 1
932	gradient = 0.0
933
934	IF ( .NOT. ocean ) THEN
935
936	lad(0) = lad_surface
937
938	lad_vertical_gradient_level_ind(1) = 0
939	DO k = 1, pch_index
940	IF ( i < 11 ) THEN
941	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
942	lad_vertical_gradient_level(i) >= 0.0 ) THEN
943	gradient = lad_vertical_gradient(i)
944	lad_vertical_gradient_level_ind(i) = k - 1
945	i = i + 1
946	ENDIF
947	ENDIF
948	IF ( gradient /= 0.0 ) THEN
949	IF ( k /= 1 ) THEN
950	lad(k) = lad(k-1) + dzu(k) * gradient
951	ELSE
952	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
953	ENDIF
954	ELSE
955	lad(k) = lad(k-1)
956	ENDIF
957	ENDDO
958
959	ENDIF
960
961	!
962	!-- In case of no given leaf area density gradients, choose a vanishing gradient
963	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
964	lad_vertical_gradient_level(1) = 0.0
965	ENDIF
966
967	ENDIF
968
969	ENDIF
970
971	!
972	!-- Compute Coriolis parameter
973	f = 2.0 * omega * SIN( phi / 180.0 * pi )
974	fs = 2.0 * omega * COS( phi / 180.0 * pi )
975
976	!
977	!-- Ocean runs always use reference values in the buoyancy term. Therefore
978	!-- set the reference temperature equal to the surface temperature.
979	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
980
981	!
982	!-- Reference value has to be used in buoyancy terms
983	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
984
985	!
986	!-- Sign of buoyancy/stability terms
987	IF ( ocean ) atmos_ocean_sign = -1.0
988
989	!
990	!-- Ocean version must use flux boundary conditions at the top
991	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
992	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
993	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
994	ENDIF
995
996	!
997	!-- In case of a given slope, compute the relevant quantities
998	IF ( alpha_surface /= 0.0 ) THEN
999	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1000	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1001	' ) must be < 90.0'
1002	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1003	ENDIF
1004	sloping_surface = .TRUE.
1005	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1006	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1007	ENDIF
1008
1009	!
1010	!-- Check time step and cfl_factor
1011	IF ( dt /= -1.0 ) THEN
1012	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1013	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1014	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1015	ENDIF
1016	dt_3d = dt
1017	dt_fixed = .TRUE.
1018	ENDIF
1019
1020	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1021	IF ( cfl_factor == -1.0 ) THEN
1022	IF ( momentum_advec == 'ups-scheme' .OR. &
1023	scalar_advec == 'ups-scheme' ) THEN
1024	cfl_factor = 0.8
1025	ELSE
1026	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1027	cfl_factor = 0.8
1028	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1029	cfl_factor = 0.9
1030	ELSE
1031	cfl_factor = 0.1
1032	ENDIF
1033	ENDIF
1034	ELSE
1035	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1036	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1037	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1038	ENDIF
1039	ENDIF
1040
1041	!
1042	!-- Store simulated time at begin
1043	simulated_time_at_begin = simulated_time
1044
1045	!
1046	!-- Store reference time for coupled runs and change the coupling flag,
1047	!-- if ...
1048	IF ( simulated_time == 0.0 ) THEN
1049	IF ( coupling_start_time == 0.0 ) THEN
1050	time_since_reference_point = 0.0
1051	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1052	run_coupled = .FALSE.
1053	ENDIF
1054	ENDIF
1055
1056	!
1057	!-- Set wind speed in the Galilei-transformed system
1058	IF ( galilei_transformation ) THEN
1059	IF ( use_ug_for_galilei_tr .AND. &
1060	ug_vertical_gradient_level(1) == 0.0 .AND. &
1061	vg_vertical_gradient_level(1) == 0.0 ) THEN
1062	u_gtrans = ug_surface
1063	v_gtrans = vg_surface
1064	ELSEIF ( use_ug_for_galilei_tr .AND. &
1065	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1066	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1067	' with galilei transformation'
1068	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1069	ELSEIF ( use_ug_for_galilei_tr .AND. &
1070	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1071	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1072	' with galilei transformation'
1073	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1074	ELSE
1075	message_string = 'variable translation speed used for galilei-' // &
1076	'transformation, which may cause & instabilities in stably ' // &
1077	'stratified regions'
1078	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1079	ENDIF
1080	ENDIF
1081
1082	!
1083	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1084	!-- fluxes have to be used in the diffusion-terms
1085	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1086
1087	!
1088	!-- Check boundary conditions and set internal variables:
1089	!-- Lateral boundary conditions
1090	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1091	bc_lr /= 'radiation/dirichlet' ) THEN
1092	message_string = 'unknown boundary condition: bc_lr = "' // &
1093	TRIM( bc_lr ) // '"'
1094	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1095	ENDIF
1096	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1097	bc_ns /= 'radiation/dirichlet' ) THEN
1098	message_string = 'unknown boundary condition: bc_ns = "' // &
1099	TRIM( bc_ns ) // '"'
1100	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1101	ENDIF
1102
1103	!
1104	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1105	!-- Willimas advection scheme. Several schemes and tools do not work with
1106	!-- non-cyclic boundary conditions.
1107	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1108	IF ( psolver /= 'multigrid' ) THEN
1109	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1110	'psolver = "' // TRIM( psolver ) // '"'
1111	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1112	ENDIF
1113	IF ( momentum_advec /= 'pw-scheme' ) THEN
1114	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1115	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1116	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1117	ENDIF
1118	IF ( scalar_advec /= 'pw-scheme' ) THEN
1119	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1120	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1121	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1122	ENDIF
1123	IF ( galilei_transformation ) THEN
1124	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1125	'galilei_transformation = .T.'
1126	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1127	ENDIF
1128	ENDIF
1129
1130	!
1131	!-- Bottom boundary condition for the turbulent Kinetic energy
1132	IF ( bc_e_b == 'neumann' ) THEN
1133	ibc_e_b = 1
1134	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1135	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1136	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1137	ENDIF
1138	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1139	ibc_e_b = 2
1140	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1141	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1142	TRIM( bc_e_b ) // '"'
1143	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1144	ENDIF
1145	IF ( .NOT. prandtl_layer ) THEN
1146	bc_e_b = 'neumann'
1147	ibc_e_b = 1
1148	message_string = 'boundary condition bc_e_b changed to "' // &
1149	TRIM( bc_e_b ) // '"'
1150	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1151	ENDIF
1152	ELSE
1153	message_string = 'unknown boundary condition: bc_e_b = "' // &
1154	TRIM( bc_e_b ) // '"'
1155	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1156	ENDIF
1157
1158	!
1159	!-- Boundary conditions for perturbation pressure
1160	IF ( bc_p_b == 'dirichlet' ) THEN
1161	ibc_p_b = 0
1162	ELSEIF ( bc_p_b == 'neumann' ) THEN
1163	ibc_p_b = 1
1164	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1165	ibc_p_b = 2
1166	ELSE
1167	message_string = 'unknown boundary condition: bc_p_b = "' // &
1168	TRIM( bc_p_b ) // '"'
1169	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1170	ENDIF
1171	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1172	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1173	'" not allowed with prandtl_layer = .FALSE.'
1174	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1175	ENDIF
1176	IF ( bc_p_t == 'dirichlet' ) THEN
1177	ibc_p_t = 0
1178	ELSEIF ( bc_p_t == 'neumann' ) THEN
1179	ibc_p_t = 1
1180	ELSE
1181	message_string = 'unknown boundary condition: bc_p_t = "' // &
1182	TRIM( bc_p_t ) // '"'
1183	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1184	ENDIF
1185
1186	!
1187	!-- Boundary conditions for potential temperature
1188	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1189	ibc_pt_b = 2
1190	ELSE
1191	IF ( bc_pt_b == 'dirichlet' ) THEN
1192	ibc_pt_b = 0
1193	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1194	ibc_pt_b = 1
1195	ELSE
1196	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1197	TRIM( bc_pt_b ) // '"'
1198	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1199	ENDIF
1200	ENDIF
1201
1202	IF ( bc_pt_t == 'dirichlet' ) THEN
1203	ibc_pt_t = 0
1204	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1205	ibc_pt_t = 1
1206	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1207	ibc_pt_t = 2
1208	ELSE
1209	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1210	TRIM( bc_pt_t ) // '"'
1211	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1212	ENDIF
1213
1214	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1215	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1216	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1217	top_momentumflux_v /= 9999999.9 ) THEN
1218	constant_top_momentumflux = .TRUE.
1219	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1220	top_momentumflux_v == 9999999.9 ) ) THEN
1221	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1222	'must be set'
1223	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1224	ENDIF
1225
1226	!
1227	!-- A given surface temperature implies Dirichlet boundary condition for
1228	!-- temperature. In this case specification of a constant heat flux is
1229	!-- forbidden.
1230	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1231	surface_heatflux /= 0.0 ) THEN
1232	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1233	'& is not allowed with constant_heatflux = .TRUE.'
1234	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1235	ENDIF
1236	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1237	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1238	'wed with pt_surface_initial_change (/=0) = ', &
1239	pt_surface_initial_change
1240	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1241	ENDIF
1242
1243	!
1244	!-- A given temperature at the top implies Dirichlet boundary condition for
1245	!-- temperature. In this case specification of a constant heat flux is
1246	!-- forbidden.
1247	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1248	top_heatflux /= 0.0 ) THEN
1249	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1250	'" is not allowed with constant_top_heatflux = .TRUE.'
1251	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1252	ENDIF
1253
1254	!
1255	!-- Boundary conditions for salinity
1256	IF ( ocean ) THEN
1257	IF ( bc_sa_t == 'dirichlet' ) THEN
1258	ibc_sa_t = 0
1259	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1260	ibc_sa_t = 1
1261	ELSE
1262	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1263	TRIM( bc_sa_t ) // '"'
1264	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1265	ENDIF
1266
1267	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1268	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1269	message_string = 'boundary condition: bc_sa_t = "' // &
1270	TRIM( bc_sa_t ) // '" requires to set ' // &
1271	'top_salinityflux'
1272	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1273	ENDIF
1274
1275	!
1276	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1277	!-- salinity. In this case specification of a constant salinity flux is
1278	!-- forbidden.
1279	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1280	top_salinityflux /= 0.0 ) THEN
1281	message_string = 'boundary condition: bc_sa_t = "' // &
1282	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1283	'constant_top_salinityflux = .TRUE.'
1284	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1285	ENDIF
1286
1287	ENDIF
1288
1289	!
1290	!-- In case of humidity or passive scalar, set boundary conditions for total
1291	!-- water content / scalar
1292	IF ( humidity .OR. passive_scalar ) THEN
1293	IF ( humidity ) THEN
1294	sq = 'q'
1295	ELSE
1296	sq = 's'
1297	ENDIF
1298	IF ( bc_q_b == 'dirichlet' ) THEN
1299	ibc_q_b = 0
1300	ELSEIF ( bc_q_b == 'neumann' ) THEN
1301	ibc_q_b = 1
1302	ELSE
1303	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1304	'_b ="' // TRIM( bc_q_b ) // '"'
1305	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1306	ENDIF
1307	IF ( bc_q_t == 'dirichlet' ) THEN
1308	ibc_q_t = 0
1309	ELSEIF ( bc_q_t == 'neumann' ) THEN
1310	ibc_q_t = 1
1311	ELSE
1312	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1313	'_t ="' // TRIM( bc_q_t ) // '"'
1314	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1315	ENDIF
1316
1317	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1318
1319	!
1320	!-- A given surface humidity implies Dirichlet boundary condition for
1321	!-- humidity. In this case specification of a constant water flux is
1322	!-- forbidden.
1323	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1324	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1325	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1326	'th prescribed surface flux'
1327	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1328	ENDIF
1329	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1330	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1331	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1332	q_surface_initial_change
1333	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1334	ENDIF
1335
1336	ENDIF
1337
1338	!
1339	!-- Boundary conditions for horizontal components of wind speed
1340	IF ( bc_uv_b == 'dirichlet' ) THEN
1341	ibc_uv_b = 0
1342	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1343	ibc_uv_b = 1
1344	IF ( prandtl_layer ) THEN
1345	message_string = 'boundary condition: bc_uv_b = "' // &
1346	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1347	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1348	ENDIF
1349	ELSE
1350	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1351	TRIM( bc_uv_b ) // '"'
1352	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1353	ENDIF
1354
1355	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1356	bc_uv_t = 'neumann'
1357	ibc_uv_t = 1
1358	ELSE
1359	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1360	ibc_uv_t = 0
1361	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1362	ibc_uv_t = 1
1363	ELSE
1364	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1365	TRIM( bc_uv_t ) // '"'
1366	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1367	ENDIF
1368	ENDIF
1369
1370	!
1371	!-- Compute and check, respectively, the Rayleigh Damping parameter
1372	IF ( rayleigh_damping_factor == -1.0 ) THEN
1373	IF ( momentum_advec == 'ups-scheme' ) THEN
1374	rayleigh_damping_factor = 0.01
1375	ELSE
1376	rayleigh_damping_factor = 0.0
1377	ENDIF
1378	ELSE
1379	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1380	THEN
1381	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1382	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1383	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1384	ENDIF
1385	ENDIF
1386
1387	IF ( rayleigh_damping_height == -1.0 ) THEN
1388	IF ( .NOT. ocean ) THEN
1389	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1390	ELSE
1391	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1392	ENDIF
1393	ELSE
1394	IF ( .NOT. ocean ) THEN
1395	IF ( rayleigh_damping_height < 0.0 .OR. &
1396	rayleigh_damping_height > zu(nzt) ) THEN
1397	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1398	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1399	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1400	ENDIF
1401	ELSE
1402	IF ( rayleigh_damping_height > 0.0 .OR. &
1403	rayleigh_damping_height < zu(nzb) ) THEN
1404	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1405	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1406	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1407	ENDIF
1408	ENDIF
1409	ENDIF
1410
1411	!
1412	!-- Check limiters for Upstream-Spline scheme
1413	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1414	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1415	overshoot_limit_e < 0.0 ) THEN
1416	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1417	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1418	ENDIF
1419	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1420	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1421	message_string = 'ups_limit_... < 0.0 is not allowed'
1422	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1423	ENDIF
1424
1425	!
1426	!-- Check number of chosen statistic regions. More than 10 regions are not
1427	!-- allowed, because so far no more than 10 corresponding output files can
1428	!-- be opened (cf. check_open)
1429	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1430	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1431	statistic_regions+1, ' but only 10 regions are allowed'
1432	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1433	ENDIF
1434	IF ( normalizing_region > statistic_regions .OR. &
1435	normalizing_region < 0) THEN
1436	WRITE ( message_string, * ) 'normalizing_region = ', &
1437	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1438	' (value of statistic_regions)'
1439	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1440	ENDIF
1441
1442	!
1443	!-- Check the interval for sorting particles.
1444	!-- Using particles as cloud droplets requires sorting after each timestep.
1445	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1446	dt_sort_particles = 0.0
1447	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1448	'_droplets = .TRUE.'
1449	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1450	ENDIF
1451
1452	!
1453	!-- Set the default intervals for data output, if necessary
1454	!-- NOTE: dt_dosp has already been set in package_parin
1455	IF ( dt_data_output /= 9999999.9 ) THEN
1456	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1457	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1458	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1459	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1460	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1461	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1462	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1463	ENDIF
1464
1465	!
1466	!-- Set the default skip time intervals for data output, if necessary
1467	IF ( skip_time_dopr == 9999999.9 ) &
1468	skip_time_dopr = skip_time_data_output
1469	IF ( skip_time_dosp == 9999999.9 ) &
1470	skip_time_dosp = skip_time_data_output
1471	IF ( skip_time_do2d_xy == 9999999.9 ) &
1472	skip_time_do2d_xy = skip_time_data_output
1473	IF ( skip_time_do2d_xz == 9999999.9 ) &
1474	skip_time_do2d_xz = skip_time_data_output
1475	IF ( skip_time_do2d_yz == 9999999.9 ) &
1476	skip_time_do2d_yz = skip_time_data_output
1477	IF ( skip_time_do3d == 9999999.9 ) &
1478	skip_time_do3d = skip_time_data_output
1479	IF ( skip_time_data_output_av == 9999999.9 ) &
1480	skip_time_data_output_av = skip_time_data_output
1481
1482	!
1483	!-- Check the average intervals (first for 3d-data, then for profiles and
1484	!-- spectra)
1485	IF ( averaging_interval > dt_data_output_av ) THEN
1486	WRITE( message_string, * ) 'averaging_interval = ', &
1487	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1488	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1489	ENDIF
1490
1491	IF ( averaging_interval_pr == 9999999.9 ) THEN
1492	averaging_interval_pr = averaging_interval
1493	ENDIF
1494
1495	IF ( averaging_interval_pr > dt_dopr ) THEN
1496	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1497	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1498	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1499	ENDIF
1500
1501	IF ( averaging_interval_sp == 9999999.9 ) THEN
1502	averaging_interval_sp = averaging_interval
1503	ENDIF
1504
1505	IF ( averaging_interval_sp > dt_dosp ) THEN
1506	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1507	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1508	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1509	ENDIF
1510
1511	!
1512	!-- Set the default interval for profiles entering the temporal average
1513	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1514	dt_averaging_input_pr = dt_averaging_input
1515	ENDIF
1516
1517	!
1518	!-- Set the default interval for the output of timeseries to a reasonable
1519	!-- value (tries to minimize the number of calls of flow_statistics)
1520	IF ( dt_dots == 9999999.9 ) THEN
1521	IF ( averaging_interval_pr == 0.0 ) THEN
1522	dt_dots = MIN( dt_run_control, dt_dopr )
1523	ELSE
1524	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1525	ENDIF
1526	ENDIF
1527
1528	!
1529	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1530	IF ( dt_averaging_input > averaging_interval ) THEN
1531	WRITE( message_string, * ) 'dt_averaging_input = ', &
1532	dt_averaging_input, ' must be <= averaging_interval = ', &
1533	averaging_interval
1534	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1535	ENDIF
1536
1537	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1538	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1539	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1540	averaging_interval_pr
1541	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1542	ENDIF
1543
1544	!
1545	!-- Set the default value for the integration interval of precipitation amount
1546	IF ( precipitation ) THEN
1547	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1548	precipitation_amount_interval = dt_do2d_xy
1549	ELSE
1550	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1551	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1552	precipitation_amount_interval, ' must not be larger than ', &
1553	'dt_do2d_xy = ', dt_do2d_xy
1554	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1555	ENDIF
1556	ENDIF
1557	ENDIF
1558
1559	!
1560	!-- Determine the number of output profiles and check whether they are
1561	!-- permissible
1562	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1563
1564	dopr_n = dopr_n + 1
1565	i = dopr_n
1566
1567	!
1568	!-- Determine internal profile number (for hom, homs)
1569	!-- and store height levels
1570	SELECT CASE ( TRIM( data_output_pr(i) ) )
1571
1572	CASE ( 'u', '#u' )
1573	dopr_index(i) = 1
1574	dopr_unit(i) = 'm/s'
1575	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1576	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1577	dopr_initial_index(i) = 5
1578	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1579	data_output_pr(i) = data_output_pr(i)(2:)
1580	ENDIF
1581
1582	CASE ( 'v', '#v' )
1583	dopr_index(i) = 2
1584	dopr_unit(i) = 'm/s'
1585	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1586	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1587	dopr_initial_index(i) = 6
1588	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1589	data_output_pr(i) = data_output_pr(i)(2:)
1590	ENDIF
1591
1592	CASE ( 'w' )
1593	dopr_index(i) = 3
1594	dopr_unit(i) = 'm/s'
1595	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1596
1597	CASE ( 'pt', '#pt' )
1598	IF ( .NOT. cloud_physics ) THEN
1599	dopr_index(i) = 4
1600	dopr_unit(i) = 'K'
1601	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1602	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1603	dopr_initial_index(i) = 7
1604	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1605	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1606	data_output_pr(i) = data_output_pr(i)(2:)
1607	ENDIF
1608	ELSE
1609	dopr_index(i) = 43
1610	dopr_unit(i) = 'K'
1611	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1613	dopr_initial_index(i) = 28
1614	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1615	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1616	data_output_pr(i) = data_output_pr(i)(2:)
1617	ENDIF
1618	ENDIF
1619
1620	CASE ( 'e' )
1621	dopr_index(i) = 8
1622	dopr_unit(i) = 'm2/s2'
1623	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1624	hom(nzb,2,8,:) = 0.0
1625
1626	CASE ( 'km', '#km' )
1627	dopr_index(i) = 9
1628	dopr_unit(i) = 'm2/s'
1629	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1630	hom(nzb,2,9,:) = 0.0
1631	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1632	dopr_initial_index(i) = 23
1633	hom(:,2,23,:) = hom(:,2,9,:)
1634	data_output_pr(i) = data_output_pr(i)(2:)
1635	ENDIF
1636
1637	CASE ( 'kh', '#kh' )
1638	dopr_index(i) = 10
1639	dopr_unit(i) = 'm2/s'
1640	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1641	hom(nzb,2,10,:) = 0.0
1642	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1643	dopr_initial_index(i) = 24
1644	hom(:,2,24,:) = hom(:,2,10,:)
1645	data_output_pr(i) = data_output_pr(i)(2:)
1646	ENDIF
1647
1648	CASE ( 'l', '#l' )
1649	dopr_index(i) = 11
1650	dopr_unit(i) = 'm'
1651	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1652	hom(nzb,2,11,:) = 0.0
1653	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1654	dopr_initial_index(i) = 25
1655	hom(:,2,25,:) = hom(:,2,11,:)
1656	data_output_pr(i) = data_output_pr(i)(2:)
1657	ENDIF
1658
1659	CASE ( 'w"u"' )
1660	dopr_index(i) = 12
1661	dopr_unit(i) = 'm2/s2'
1662	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1663	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1664
1665	CASE ( 'wu' )
1666	dopr_index(i) = 13
1667	dopr_unit(i) = 'm2/s2'
1668	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1669
1670	CASE ( 'w"v"' )
1671	dopr_index(i) = 14
1672	dopr_unit(i) = 'm2/s2'
1673	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1674	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1675
1676	CASE ( 'wv' )
1677	dopr_index(i) = 15
1678	dopr_unit(i) = 'm2/s2'
1679	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1680
1681	CASE ( 'w"pt"' )
1682	dopr_index(i) = 16
1683	dopr_unit(i) = 'K m/s'
1684	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1685
1686	CASE ( 'wpt' )
1687	dopr_index(i) = 17
1688	dopr_unit(i) = 'K m/s'
1689	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1690
1691	CASE ( 'wpt' )
1692	dopr_index(i) = 18
1693	dopr_unit(i) = 'K m/s'
1694	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1695
1696	CASE ( 'wu' )
1697	dopr_index(i) = 19
1698	dopr_unit(i) = 'm2/s2'
1699	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1700	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1701
1702	CASE ( 'wv' )
1703	dopr_index(i) = 20
1704	dopr_unit(i) = 'm2/s2'
1705	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1706	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1707
1708	CASE ( 'wptBC' )
1709	dopr_index(i) = 21
1710	dopr_unit(i) = 'K m/s'
1711	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1712
1713	CASE ( 'wptBC' )
1714	dopr_index(i) = 22
1715	dopr_unit(i) = 'K m/s'
1716	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1717
1718	CASE ( 'sa', '#sa' )
1719	IF ( .NOT. ocean ) THEN
1720	message_string = 'data_output_pr = ' // &
1721	TRIM( data_output_pr(i) ) // ' is not imp' // &
1722	'lemented for ocean = .FALSE.'
1723	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1724	ELSE
1725	dopr_index(i) = 23
1726	dopr_unit(i) = 'psu'
1727	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1728	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1729	dopr_initial_index(i) = 26
1730	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1731	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1732	data_output_pr(i) = data_output_pr(i)(2:)
1733	ENDIF
1734	ENDIF
1735
1736	CASE ( 'u*2' )
1737	dopr_index(i) = 30
1738	dopr_unit(i) = 'm2/s2'
1739	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1740
1741	CASE ( 'v*2' )
1742	dopr_index(i) = 31
1743	dopr_unit(i) = 'm2/s2'
1744	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1745
1746	CASE ( 'w*2' )
1747	dopr_index(i) = 32
1748	dopr_unit(i) = 'm2/s2'
1749	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1750
1751	CASE ( 'pt*2' )
1752	dopr_index(i) = 33
1753	dopr_unit(i) = 'K2'
1754	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1755
1756	CASE ( 'e*' )
1757	dopr_index(i) = 34
1758	dopr_unit(i) = 'm2/s2'
1759	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1760
1761	CASE ( 'w2pt' )
1762	dopr_index(i) = 35
1763	dopr_unit(i) = 'K m2/s2'
1764	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1765
1766	CASE ( 'wpt2' )
1767	dopr_index(i) = 36
1768	dopr_unit(i) = 'K2 m/s'
1769	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1770
1771	CASE ( 'we' )
1772	dopr_index(i) = 37
1773	dopr_unit(i) = 'm3/s3'
1774	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1775
1776	CASE ( 'w*3' )
1777	dopr_index(i) = 38
1778	dopr_unit(i) = 'm3/s3'
1779	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1780
1781	CASE ( 'Sw' )
1782	dopr_index(i) = 39
1783	dopr_unit(i) = 'none'
1784	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1785
1786	CASE ( 'p' )
1787	dopr_index(i) = 40
1788	dopr_unit(i) = 'Pa'
1789	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1790
1791	CASE ( 'q', '#q' )
1792	IF ( .NOT. humidity ) THEN
1793	message_string = 'data_output_pr = ' // &
1794	TRIM( data_output_pr(i) ) // ' is not imp' // &
1795	'lemented for humidity = .FALSE.'
1796	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1797	ELSE
1798	dopr_index(i) = 41
1799	dopr_unit(i) = 'kg/kg'
1800	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1801	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1802	dopr_initial_index(i) = 26
1803	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1804	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1805	data_output_pr(i) = data_output_pr(i)(2:)
1806	ENDIF
1807	ENDIF
1808
1809	CASE ( 's', '#s' )
1810	IF ( .NOT. passive_scalar ) THEN
1811	message_string = 'data_output_pr = ' // &
1812	TRIM( data_output_pr(i) ) // ' is not imp' // &
1813	'lemented for passive_scalar = .FALSE.'
1814	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1815	ELSE
1816	dopr_index(i) = 41
1817	dopr_unit(i) = 'kg/m3'
1818	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1819	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1820	dopr_initial_index(i) = 26
1821	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1822	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1823	data_output_pr(i) = data_output_pr(i)(2:)
1824	ENDIF
1825	ENDIF
1826
1827	CASE ( 'qv', '#qv' )
1828	IF ( .NOT. cloud_physics ) THEN
1829	dopr_index(i) = 41
1830	dopr_unit(i) = 'kg/kg'
1831	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1832	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1833	dopr_initial_index(i) = 26
1834	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1835	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1836	data_output_pr(i) = data_output_pr(i)(2:)
1837	ENDIF
1838	ELSE
1839	dopr_index(i) = 42
1840	dopr_unit(i) = 'kg/kg'
1841	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1842	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1843	dopr_initial_index(i) = 27
1844	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1845	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1846	data_output_pr(i) = data_output_pr(i)(2:)
1847	ENDIF
1848	ENDIF
1849
1850	CASE ( 'lpt', '#lpt' )
1851	IF ( .NOT. cloud_physics ) THEN
1852	message_string = 'data_output_pr = ' // &
1853	TRIM( data_output_pr(i) ) // ' is not imp' // &
1854	'lemented for cloud_physics = .FALSE.'
1855	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1856	ELSE
1857	dopr_index(i) = 4
1858	dopr_unit(i) = 'K'
1859	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1860	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1861	dopr_initial_index(i) = 7
1862	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1863	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1864	data_output_pr(i) = data_output_pr(i)(2:)
1865	ENDIF
1866	ENDIF
1867
1868	CASE ( 'vpt', '#vpt' )
1869	dopr_index(i) = 44
1870	dopr_unit(i) = 'K'
1871	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1872	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1873	dopr_initial_index(i) = 29
1874	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1875	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1876	data_output_pr(i) = data_output_pr(i)(2:)
1877	ENDIF
1878
1879	CASE ( 'w"vpt"' )
1880	dopr_index(i) = 45
1881	dopr_unit(i) = 'K m/s'
1882	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1883
1884	CASE ( 'wvpt' )
1885	dopr_index(i) = 46
1886	dopr_unit(i) = 'K m/s'
1887	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1888
1889	CASE ( 'wvpt' )
1890	dopr_index(i) = 47
1891	dopr_unit(i) = 'K m/s'
1892	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1893
1894	CASE ( 'w"q"' )
1895	IF ( .NOT. humidity ) THEN
1896	message_string = 'data_output_pr = ' // &
1897	TRIM( data_output_pr(i) ) // ' is not imp' // &
1898	'lemented for humidity = .FALSE.'
1899	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1900	ELSE
1901	dopr_index(i) = 48
1902	dopr_unit(i) = 'kg/kg m/s'
1903	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1904	ENDIF
1905
1906	CASE ( 'wq' )
1907	IF ( .NOT. humidity ) THEN
1908	message_string = 'data_output_pr = ' // &
1909	TRIM( data_output_pr(i) ) // ' is not imp' // &
1910	'lemented for humidity = .FALSE.'
1911	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1912	ELSE
1913	dopr_index(i) = 49
1914	dopr_unit(i) = 'kg/kg m/s'
1915	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1916	ENDIF
1917
1918	CASE ( 'wq' )
1919	IF ( .NOT. humidity ) THEN
1920	message_string = 'data_output_pr = ' // &
1921	TRIM( data_output_pr(i) ) // ' is not imp' // &
1922	'lemented for humidity = .FALSE.'
1923	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1924	ELSE
1925	dopr_index(i) = 50
1926	dopr_unit(i) = 'kg/kg m/s'
1927	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1928	ENDIF
1929
1930	CASE ( 'w"s"' )
1931	IF ( .NOT. passive_scalar ) THEN
1932	message_string = 'data_output_pr = ' // &
1933	TRIM( data_output_pr(i) ) // ' is not imp' // &
1934	'lemented for passive_scalar = .FALSE.'
1935	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1936	ELSE
1937	dopr_index(i) = 48
1938	dopr_unit(i) = 'kg/m3 m/s'
1939	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1940	ENDIF
1941
1942	CASE ( 'ws' )
1943	IF ( .NOT. passive_scalar ) THEN
1944	message_string = 'data_output_pr = ' // &
1945	TRIM( data_output_pr(i) ) // ' is not imp' // &
1946	'lemented for passive_scalar = .FALSE.'
1947	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1948	ELSE
1949	dopr_index(i) = 49
1950	dopr_unit(i) = 'kg/m3 m/s'
1951	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1952	ENDIF
1953
1954	CASE ( 'ws' )
1955	IF ( .NOT. passive_scalar ) THEN
1956	message_string = 'data_output_pr = ' // &
1957	TRIM( data_output_pr(i) ) // ' is not imp' // &
1958	'lemented for passive_scalar = .FALSE.'
1959	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1960	ELSE
1961	dopr_index(i) = 50
1962	dopr_unit(i) = 'kg/m3 m/s'
1963	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1964	ENDIF
1965
1966	CASE ( 'w"qv"' )
1967	IF ( humidity .AND. .NOT. cloud_physics ) &
1968	THEN
1969	dopr_index(i) = 48
1970	dopr_unit(i) = 'kg/kg m/s'
1971	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1972	ELSEIF( humidity .AND. cloud_physics ) THEN
1973	dopr_index(i) = 51
1974	dopr_unit(i) = 'kg/kg m/s'
1975	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1976	ELSE
1977	message_string = 'data_output_pr = ' // &
1978	TRIM( data_output_pr(i) ) // ' is not imp' // &
1979	'lemented for cloud_physics = .FALSE. an&' // &
1980	'd humidity = .FALSE.'
1981	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1982	ENDIF
1983
1984	CASE ( 'wqv' )
1985	IF ( humidity .AND. .NOT. cloud_physics ) &
1986	THEN
1987	dopr_index(i) = 49
1988	dopr_unit(i) = 'kg/kg m/s'
1989	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1990	ELSEIF( humidity .AND. cloud_physics ) THEN
1991	dopr_index(i) = 52
1992	dopr_unit(i) = 'kg/kg m/s'
1993	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1994	ELSE
1995	message_string = 'data_output_pr = ' // &
1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
1997	'lemented for cloud_physics = .FALSE. an&' // &
1998	'd humidity = .FALSE.'
1999	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2000	ENDIF
2001
2002	CASE ( 'wqv' )
2003	IF ( humidity .AND. .NOT. cloud_physics ) &
2004	THEN
2005	dopr_index(i) = 50
2006	dopr_unit(i) = 'kg/kg m/s'
2007	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2008	ELSEIF( humidity .AND. cloud_physics ) THEN
2009	dopr_index(i) = 53
2010	dopr_unit(i) = 'kg/kg m/s'
2011	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2012	ELSE
2013	message_string = 'data_output_pr = ' // &
2014	TRIM( data_output_pr(i) ) // ' is not imp' // &
2015	'lemented for cloud_physics = .FALSE. an&' // &
2016	'd humidity = .FALSE.'
2017	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2018	ENDIF
2019
2020	CASE ( 'ql' )
2021	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2022	message_string = 'data_output_pr = ' // &
2023	TRIM( data_output_pr(i) ) // ' is not imp' // &
2024	'lemented for cloud_physics = .FALSE. or' // &
2025	'&cloud_droplets = .FALSE.'
2026	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2027	ELSE
2028	dopr_index(i) = 54
2029	dopr_unit(i) = 'kg/kg'
2030	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2031	ENDIF
2032
2033	CASE ( 'wuu*/dz' )
2034	dopr_index(i) = 55
2035	dopr_unit(i) = 'm2/s3'
2036	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2037
2038	CASE ( 'wp/dz' )
2039	dopr_index(i) = 56
2040	dopr_unit(i) = 'm2/s3'
2041	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2042
2043	CASE ( 'w"e/dz' )
2044	dopr_index(i) = 57
2045	dopr_unit(i) = 'm2/s3'
2046	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2047
2048	CASE ( 'u"pt"' )
2049	dopr_index(i) = 58
2050	dopr_unit(i) = 'K m/s'
2051	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2052
2053	CASE ( 'upt' )
2054	dopr_index(i) = 59
2055	dopr_unit(i) = 'K m/s'
2056	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2057
2058	CASE ( 'upt_t' )
2059	dopr_index(i) = 60
2060	dopr_unit(i) = 'K m/s'
2061	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2062
2063	CASE ( 'v"pt"' )
2064	dopr_index(i) = 61
2065	dopr_unit(i) = 'K m/s'
2066	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2067
2068	CASE ( 'vpt' )
2069	dopr_index(i) = 62
2070	dopr_unit(i) = 'K m/s'
2071	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2072
2073	CASE ( 'vpt_t' )
2074	dopr_index(i) = 63
2075	dopr_unit(i) = 'K m/s'
2076	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2077
2078	CASE ( 'rho' )
2079	dopr_index(i) = 64
2080	dopr_unit(i) = 'kg/m3'
2081	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2082
2083	CASE ( 'w"sa"' )
2084	IF ( .NOT. ocean ) THEN
2085	message_string = 'data_output_pr = ' // &
2086	TRIM( data_output_pr(i) ) // ' is not imp' // &
2087	'lemented for ocean = .FALSE.'
2088	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2089	ELSE
2090	dopr_index(i) = 65
2091	dopr_unit(i) = 'psu m/s'
2092	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2093	ENDIF
2094
2095	CASE ( 'wsa' )
2096	IF ( .NOT. ocean ) THEN
2097	message_string = 'data_output_pr = ' // &
2098	TRIM( data_output_pr(i) ) // ' is not imp' // &
2099	'lemented for ocean = .FALSE.'
2100	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2101	ELSE
2102	dopr_index(i) = 66
2103	dopr_unit(i) = 'psu m/s'
2104	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2105	ENDIF
2106
2107	CASE ( 'wsa' )
2108	IF ( .NOT. ocean ) THEN
2109	message_string = 'data_output_pr = ' // &
2110	TRIM( data_output_pr(i) ) // ' is not imp' // &
2111	'lemented for ocean = .FALSE.'
2112	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2113	ELSE
2114	dopr_index(i) = 67
2115	dopr_unit(i) = 'psu m/s'
2116	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2117	ENDIF
2118
2119	CASE ( 'wp' )
2120	dopr_index(i) = 68
2121	dopr_unit(i) = 'm3/s3'
2122	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2123
2124	CASE ( 'w"e' )
2125	dopr_index(i) = 69
2126	dopr_unit(i) = 'm3/s3'
2127	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2128
2129	CASE ( 'q*2' )
2130	IF ( .NOT. humidity ) THEN
2131	message_string = 'data_output_pr = ' // &
2132	TRIM( data_output_pr(i) ) // ' is not imp' // &
2133	'lemented for humidity = .FALSE.'
2134	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2135	ELSE
2136	dopr_index(i) = 70
2137	dopr_unit(i) = 'kg2/kg2'
2138	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2139	ENDIF
2140
2141	CASE DEFAULT
2142
2143	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2144
2145	IF ( unit == 'illegal' ) THEN
2146	IF ( data_output_pr_user(1) /= ' ' ) THEN
2147	message_string = 'illegal value for data_output_pr or ' // &
2148	'data_output_pr_user = "' // &
2149	TRIM( data_output_pr(i) ) // '"'
2150	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2151	ELSE
2152	message_string = 'illegal value for data_output_pr = "' // &
2153	TRIM( data_output_pr(i) ) // '"'
2154	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2155	ENDIF
2156	ENDIF
2157
2158	END SELECT
2159	!
2160	!-- Check to which of the predefined coordinate systems the profile belongs
2161	DO k = 1, crmax
2162	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2163	/=0 ) &
2164	THEN
2165	dopr_crossindex(i) = k
2166	EXIT
2167	ENDIF
2168	ENDDO
2169	!
2170	!-- Generate the text for the labels of the PROFIL output file. "-characters
2171	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2172	!-- control characters
2173	dopr_label(i) = data_output_pr(i)
2174	position = INDEX( dopr_label(i) , '"' )
2175	DO WHILE ( position /= 0 )
2176	dopr_label(i)(position:position) = ''''
2177	position = INDEX( dopr_label(i) , '"' )
2178	ENDDO
2179
2180	ENDDO
2181
2182	!
2183	!-- y-value range of the coordinate system (PROFIL).
2184	!-- x-value range determined in plot_1d.
2185	IF ( .NOT. ocean ) THEN
2186	cross_uymin = 0.0
2187	IF ( z_max_do1d == -1.0 ) THEN
2188	cross_uymax = zu(nzt+1)
2189	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2190	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2191	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2192	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2193	ELSE
2194	cross_uymax = z_max_do1d
2195	ENDIF
2196	ENDIF
2197
2198	!
2199	!-- Check whether the chosen normalizing factor for the coordinate systems is
2200	!-- permissible
2201	DO i = 1, crmax
2202	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2203
2204	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2205	j = 0
2206
2207	CASE DEFAULT
2208	message_string = 'unknown normalization method cross_normali' // &
2209	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2210	'"'
2211	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2212
2213	END SELECT
2214	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2215
2216	CASE ( '', 'z_i' )
2217	j = 0
2218
2219	CASE DEFAULT
2220	message_string = 'unknown normalization method cross_normali' // &
2221	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2222	'"'
2223	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2224
2225	END SELECT
2226	ENDDO
2227	!
2228	!-- Check normalized y-value range of the coordinate system (PROFIL)
2229	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2230	THEN
2231	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2232	z_max_do1d_normalized, ' must be >= 0.0'
2233	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2234	ENDIF
2235
2236
2237	!
2238	!-- Append user-defined data output variables to the standard data output
2239	IF ( data_output_user(1) /= ' ' ) THEN
2240	i = 1
2241	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2242	i = i + 1
2243	ENDDO
2244	j = 1
2245	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2246	IF ( i > 100 ) THEN
2247	message_string = 'number of output quantitities given by data' // &
2248	'_output and data_output_user exceeds the limit of 100'
2249	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2250	ENDIF
2251	data_output(i) = data_output_user(j)
2252	i = i + 1
2253	j = j + 1
2254	ENDDO
2255	ENDIF
2256
2257	!
2258	!-- Check and set steering parameters for 2d/3d data output and averaging
2259	i = 1
2260	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2261	!
2262	!-- Check for data averaging
2263	ilen = LEN_TRIM( data_output(i) )
2264	j = 0 ! no data averaging
2265	IF ( ilen > 3 ) THEN
2266	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2267	j = 1 ! data averaging
2268	data_output(i) = data_output(i)(1:ilen-3)
2269	ENDIF
2270	ENDIF
2271	!
2272	!-- Check for cross section or volume data
2273	ilen = LEN_TRIM( data_output(i) )
2274	k = 0 ! 3d data
2275	var = data_output(i)(1:ilen)
2276	IF ( ilen > 3 ) THEN
2277	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2278	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2279	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2280	k = 1 ! 2d data
2281	var = data_output(i)(1:ilen-3)
2282	ENDIF
2283	ENDIF
2284	!
2285	!-- Check for allowed value and set units
2286	SELECT CASE ( TRIM( var ) )
2287
2288	CASE ( 'e' )
2289	IF ( constant_diffusion ) THEN
2290	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2291	'res constant_diffusion = .FALSE.'
2292	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2293	ENDIF
2294	unit = 'm2/s2'
2295
2296	CASE ( 'pc', 'pr' )
2297	IF ( .NOT. particle_advection ) THEN
2298	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2299	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2300	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2301	ENDIF
2302	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2303	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2304
2305	CASE ( 'q', 'vpt' )
2306	IF ( .NOT. humidity ) THEN
2307	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2308	'res humidity = .TRUE.'
2309	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2310	ENDIF
2311	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2312	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2313
2314	CASE ( 'ql' )
2315	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2316	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2317	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2318	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2319	ENDIF
2320	unit = 'kg/kg'
2321
2322	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2323	IF ( .NOT. cloud_droplets ) THEN
2324	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2325	'res cloud_droplets = .TRUE.'
2326	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2327	ENDIF
2328	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2329	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2330	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2331
2332	CASE ( 'qv' )
2333	IF ( .NOT. cloud_physics ) THEN
2334	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2335	'res cloud_physics = .TRUE.'
2336	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2337	ENDIF
2338	unit = 'kg/kg'
2339
2340	CASE ( 'rho' )
2341	IF ( .NOT. ocean ) THEN
2342	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2343	'res ocean = .TRUE.'
2344	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2345	ENDIF
2346	unit = 'kg/m3'
2347
2348	CASE ( 's' )
2349	IF ( .NOT. passive_scalar ) THEN
2350	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2351	'res passive_scalar = .TRUE.'
2352	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2353	ENDIF
2354	unit = 'conc'
2355
2356	CASE ( 'sa' )
2357	IF ( .NOT. ocean ) THEN
2358	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2359	'res ocean = .TRUE.'
2360	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2361	ENDIF
2362	unit = 'psu'
2363
2364	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2365	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2366	message_string = 'illegal value for data_output: "' // &
2367	TRIM( var ) // '" & only 2d-horizontal ' // &
2368	'cross sections are allowed for this value'
2369	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2370	ENDIF
2371	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2372	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2373	'res cloud_physics = .TRUE.'
2374	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2375	ENDIF
2376	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2377	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2378	'res precipitation = .TRUE.'
2379	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2380	ENDIF
2381	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2382	message_string = 'temporal averaging of precipitation ' // &
2383	'amount "' // TRIM( var ) // '" is not possible'
2384	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2385	ENDIF
2386	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2388	'res precipitation = .TRUE.'
2389	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2390	ENDIF
2391
2392
2393	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2394	IF ( TRIM( var ) == 't*' ) unit = 'K'
2395	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2396	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2397	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2398	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2399
2400	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2401	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2402	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2403	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2404	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2405	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2406	CONTINUE
2407
2408	CASE DEFAULT
2409	CALL user_check_data_output( var, unit )
2410
2411	IF ( unit == 'illegal' ) THEN
2412	IF ( data_output_user(1) /= ' ' ) THEN
2413	message_string = 'illegal value for data_output or ' // &
2414	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2415	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2416	ELSE
2417	message_string = 'illegal value for data_output =' // &
2418	TRIM( data_output(i) ) // '"'
2419	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2420	ENDIF
2421	ENDIF
2422
2423	END SELECT
2424	!
2425	!-- Set the internal steering parameters appropriately
2426	IF ( k == 0 ) THEN
2427	do3d_no(j) = do3d_no(j) + 1
2428	do3d(j,do3d_no(j)) = data_output(i)
2429	do3d_unit(j,do3d_no(j)) = unit
2430	ELSE
2431	do2d_no(j) = do2d_no(j) + 1
2432	do2d(j,do2d_no(j)) = data_output(i)
2433	do2d_unit(j,do2d_no(j)) = unit
2434	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2435	data_output_xy(j) = .TRUE.
2436	ENDIF
2437	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2438	data_output_xz(j) = .TRUE.
2439	ENDIF
2440	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2441	data_output_yz(j) = .TRUE.
2442	ENDIF
2443	ENDIF
2444
2445	IF ( j == 1 ) THEN
2446	!
2447	!-- Check, if variable is already subject to averaging
2448	found = .FALSE.
2449	DO k = 1, doav_n
2450	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2451	ENDDO
2452
2453	IF ( .NOT. found ) THEN
2454	doav_n = doav_n + 1
2455	doav(doav_n) = var
2456	ENDIF
2457	ENDIF
2458
2459	i = i + 1
2460	ENDDO
2461
2462	!
2463	!-- Check sectional planes and store them in one shared array
2464	IF ( ANY( section_xy > nz + 1 ) ) THEN
2465	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2466	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2467	ENDIF
2468	IF ( ANY( section_xz > ny + 1 ) ) THEN
2469	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2470	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2471	ENDIF
2472	IF ( ANY( section_yz > nx + 1 ) ) THEN
2473	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2474	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2475	ENDIF
2476	section(:,1) = section_xy
2477	section(:,2) = section_xz
2478	section(:,3) = section_yz
2479
2480	!
2481	!-- Upper plot limit (grid point value) for 1D profiles
2482	IF ( z_max_do1d == -1.0 ) THEN
2483	nz_do1d = nzt+1
2484	ELSE
2485	DO k = nzb+1, nzt+1
2486	nz_do1d = k
2487	IF ( zw(k) > z_max_do1d ) EXIT
2488	ENDDO
2489	ENDIF
2490
2491	!
2492	!-- Upper plot limit for 2D vertical sections
2493	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2494	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2495	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2496	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2497	' (zu(nzt))'
2498	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2499	ENDIF
2500
2501	!
2502	!-- Upper plot limit for 3D arrays
2503	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2504
2505	!
2506	!-- Determine and check accuracy for compressed 3D plot output
2507	IF ( do3d_compress ) THEN
2508	!
2509	!-- Compression only permissible on T3E machines
2510	IF ( host(1:3) /= 't3e' ) THEN
2511	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2512	TRIM( host ) // '"'
2513	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2514	ENDIF
2515
2516	i = 1
2517	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2518
2519	ilen = LEN_TRIM( do3d_comp_prec(i) )
2520	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2521	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2522	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2523	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2524	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2525	ENDIF
2526
2527	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2528	var = do3d_comp_prec(i)(1:ilen-1)
2529
2530	SELECT CASE ( var )
2531
2532	CASE ( 'u' )
2533	j = 1
2534	CASE ( 'v' )
2535	j = 2
2536	CASE ( 'w' )
2537	j = 3
2538	CASE ( 'p' )
2539	j = 4
2540	CASE ( 'pt' )
2541	j = 5
2542
2543	CASE DEFAULT
2544	WRITE( message_string, * ) 'unknown variable "', &
2545	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2546	i, ')'
2547	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2548
2549	END SELECT
2550
2551	plot_3d_precision(j)%precision = prec
2552	i = i + 1
2553
2554	ENDDO
2555	ENDIF
2556
2557	!
2558	!-- Check the data output format(s)
2559	IF ( data_output_format(1) == ' ' ) THEN
2560	!
2561	!-- Default value
2562	netcdf_output = .TRUE.
2563	ELSE
2564	i = 1
2565	DO WHILE ( data_output_format(i) /= ' ' )
2566
2567	SELECT CASE ( data_output_format(i) )
2568
2569	CASE ( 'netcdf' )
2570	netcdf_output = .TRUE.
2571	CASE ( 'iso2d' )
2572	iso2d_output = .TRUE.
2573	CASE ( 'profil' )
2574	profil_output = .TRUE.
2575	CASE ( 'avs' )
2576	avs_output = .TRUE.
2577
2578	CASE DEFAULT
2579	message_string = 'unknown value for data_output_format "' // &
2580	TRIM( data_output_format(i) ) // '"'
2581	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2582
2583	END SELECT
2584
2585	i = i + 1
2586	IF ( i > 10 ) EXIT
2587
2588	ENDDO
2589
2590	ENDIF
2591
2592	!
2593	!-- Check netcdf precison
2594	ldum = .FALSE.
2595	CALL define_netcdf_header( 'ch', ldum, 0 )
2596
2597	!
2598	!-- Check, whether a constant diffusion coefficient shall be used
2599	IF ( km_constant /= -1.0 ) THEN
2600	IF ( km_constant < 0.0 ) THEN
2601	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2602	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2603	ELSE
2604	IF ( prandtl_number < 0.0 ) THEN
2605	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2606	' < 0.0'
2607	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2608	ENDIF
2609	constant_diffusion = .TRUE.
2610
2611	IF ( prandtl_layer ) THEN
2612	message_string = 'prandtl_layer is not allowed with fixed ' // &
2613	'value of km'
2614	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2615	ENDIF
2616	ENDIF
2617	ENDIF
2618
2619	!
2620	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2621	!-- for the horizontal diffusivity used within the outflow damping layer,
2622	!-- and check/set the width of the damping layer
2623	IF ( bc_lr /= 'cyclic' ) THEN
2624	IF ( km_damp_max == -1.0 ) THEN
2625	km_damp_max = 0.5 * dx
2626	ENDIF
2627	IF ( outflow_damping_width == -1.0 ) THEN
2628	outflow_damping_width = MIN( 20, nx/2 )
2629	ENDIF
2630	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2631	message_string = 'outflow_damping width out of range'
2632	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2633	ENDIF
2634	ENDIF
2635
2636	IF ( bc_ns /= 'cyclic' ) THEN
2637	IF ( km_damp_max == -1.0 ) THEN
2638	km_damp_max = 0.5 * dy
2639	ENDIF
2640	IF ( outflow_damping_width == -1.0 ) THEN
2641	outflow_damping_width = MIN( 20, ny/2 )
2642	ENDIF
2643	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2644	message_string = 'outflow_damping width out of range'
2645	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2646	ENDIF
2647	ENDIF
2648
2649	!
2650	!-- Check value range for rif
2651	IF ( rif_min >= rif_max ) THEN
2652	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2653	'than rif_max = ', rif_max
2654	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2655	ENDIF
2656
2657	!
2658	!-- Determine upper and lower hight level indices for random perturbations
2659	IF ( disturbance_level_b == -9999999.9 ) THEN
2660	IF ( ocean ) THEN
2661	disturbance_level_b = zu((nzt*2)/3)
2662	disturbance_level_ind_b = ( nzt * 2 ) / 3
2663	ELSE
2664	disturbance_level_b = zu(nzb+3)
2665	disturbance_level_ind_b = nzb + 3
2666	ENDIF
2667	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2668	WRITE( message_string, * ) 'disturbance_level_b = ', &
2669	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2670	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2671	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2672	WRITE( message_string, * ) 'disturbance_level_b = ', &
2673	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2674	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2675	ELSE
2676	DO k = 3, nzt-2
2677	IF ( disturbance_level_b <= zu(k) ) THEN
2678	disturbance_level_ind_b = k
2679	EXIT
2680	ENDIF
2681	ENDDO
2682	ENDIF
2683
2684	IF ( disturbance_level_t == -9999999.9 ) THEN
2685	IF ( ocean ) THEN
2686	disturbance_level_t = zu(nzt-3)
2687	disturbance_level_ind_t = nzt - 3
2688	ELSE
2689	disturbance_level_t = zu(nzt/3)
2690	disturbance_level_ind_t = nzt / 3
2691	ENDIF
2692	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2693	WRITE( message_string, * ) 'disturbance_level_t = ', &
2694	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2695	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2696	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2697	WRITE( message_string, * ) 'disturbance_level_t = ', &
2698	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2699	disturbance_level_b
2700	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2701	ELSE
2702	DO k = 3, nzt-2
2703	IF ( disturbance_level_t <= zu(k) ) THEN
2704	disturbance_level_ind_t = k
2705	EXIT
2706	ENDIF
2707	ENDDO
2708	ENDIF
2709
2710	!
2711	!-- Check again whether the levels determined this way are ok.
2712	!-- Error may occur at automatic determination and too few grid points in
2713	!-- z-direction.
2714	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2715	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2716	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2717	disturbance_level_b
2718	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2719	ENDIF
2720
2721	!
2722	!-- Determine the horizontal index range for random perturbations.
2723	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2724	!-- near the inflow and the perturbation area is further limited to ...(1)
2725	!-- after the initial phase of the flow.
2726	dist_nxl = 0; dist_nxr = nx
2727	dist_nys = 0; dist_nyn = ny
2728	IF ( bc_lr /= 'cyclic' ) THEN
2729	IF ( inflow_disturbance_begin == -1 ) THEN
2730	inflow_disturbance_begin = MIN( 10, nx/2 )
2731	ENDIF
2732	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2733	THEN
2734	message_string = 'inflow_disturbance_begin out of range'
2735	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2736	ENDIF
2737	IF ( inflow_disturbance_end == -1 ) THEN
2738	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2739	ENDIF
2740	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2741	THEN
2742	message_string = 'inflow_disturbance_end out of range'
2743	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2744	ENDIF
2745	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2746	IF ( inflow_disturbance_begin == -1 ) THEN
2747	inflow_disturbance_begin = MIN( 10, ny/2 )
2748	ENDIF
2749	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2750	THEN
2751	message_string = 'inflow_disturbance_begin out of range'
2752	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2753	ENDIF
2754	IF ( inflow_disturbance_end == -1 ) THEN
2755	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2756	ENDIF
2757	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2758	THEN
2759	message_string = 'inflow_disturbance_end out of range'
2760	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2761	ENDIF
2762	ENDIF
2763
2764	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2765	dist_nxr = nx - inflow_disturbance_begin
2766	dist_nxl(1) = nx - inflow_disturbance_end
2767	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2768	dist_nxl = inflow_disturbance_begin
2769	dist_nxr(1) = inflow_disturbance_end
2770	ENDIF
2771	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2772	dist_nyn = ny - inflow_disturbance_begin
2773	dist_nys(1) = ny - inflow_disturbance_end
2774	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2775	dist_nys = inflow_disturbance_begin
2776	dist_nyn(1) = inflow_disturbance_end
2777	ENDIF
2778
2779	!
2780	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2781	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2782	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2783	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2784	'condition at the inflow boundary'
2785	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2786	ENDIF
2787
2788	!
2789	!-- In case of turbulent inflow calculate the index of the recycling plane
2790	IF ( turbulent_inflow ) THEN
2791	IF ( recycling_width == 9999999.9 ) THEN
2792	!
2793	!-- Set the default value for the width of the recycling domain
2794	recycling_width = 0.1 * nx * dx
2795	ELSE
2796	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2797	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2798	' ', recycling_width
2799	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2800	ENDIF
2801	ENDIF
2802	!
2803	!-- Calculate the index
2804	recycling_plane = recycling_width / dx
2805	ENDIF
2806
2807	!
2808	!-- Check random generator
2809	IF ( random_generator /= 'system-specific' .AND. &
2810	random_generator /= 'numerical-recipes' ) THEN
2811	message_string = 'unknown random generator: random_generator = "' // &
2812	TRIM( random_generator ) // '"'
2813	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2814	ENDIF
2815
2816	!
2817	!-- Determine damping level index for 1D model
2818	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2819	IF ( damp_level_1d == -1.0 ) THEN
2820	damp_level_1d = zu(nzt+1)
2821	damp_level_ind_1d = nzt + 1
2822	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2823	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2824	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2825	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2826	ELSE
2827	DO k = 1, nzt+1
2828	IF ( damp_level_1d <= zu(k) ) THEN
2829	damp_level_ind_1d = k
2830	EXIT
2831	ENDIF
2832	ENDDO
2833	ENDIF
2834	ENDIF
2835
2836	!
2837	!-- Check some other 1d-model parameters
2838	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2839	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2840	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2841	'" is unknown'
2842	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2843	ENDIF
2844	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2845	TRIM( dissipation_1d ) /= 'detering' ) THEN
2846	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2847	'" is unknown'
2848	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2849	ENDIF
2850
2851	!
2852	!-- Set time for the next user defined restart (time_restart is the
2853	!-- internal parameter for steering restart events)
2854	IF ( restart_time /= 9999999.9 ) THEN
2855	IF ( restart_time > time_since_reference_point ) THEN
2856	time_restart = restart_time
2857	ENDIF
2858	ELSE
2859	!
2860	!-- In case of a restart run, set internal parameter to default (no restart)
2861	!-- if the NAMELIST-parameter restart_time is omitted
2862	time_restart = 9999999.9
2863	ENDIF
2864
2865	!
2866	!-- Set default value of the time needed to terminate a model run
2867	IF ( termination_time_needed == -1.0 ) THEN
2868	IF ( host(1:3) == 'ibm' ) THEN
2869	termination_time_needed = 300.0
2870	ELSE
2871	termination_time_needed = 35.0
2872	ENDIF
2873	ENDIF
2874
2875	!
2876	!-- Check the time needed to terminate a model run
2877	IF ( host(1:3) == 't3e' ) THEN
2878	!
2879	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2880	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2881	IF ( termination_time_needed <= 30.0 ) THEN
2882	WRITE( message_string, * ) 'termination_time_needed = ', &
2883	termination_time_needed, ' must be > 30.0 on host "', &
2884	TRIM( host ), '"'
2885	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2886	ENDIF
2887	ELSEIF ( host(1:3) == 'ibm' ) THEN
2888	!
2889	!-- On IBM-regatta machines the time should be at least 300 seconds,
2890	!-- because the job time consumed before executing palm (for compiling,
2891	!-- copying of files, etc.) has to be regarded
2892	IF ( termination_time_needed < 300.0 ) THEN
2893	WRITE( message_string, * ) 'termination_time_needed = ', &
2894	termination_time_needed, ' should be >= 300.0 on host "', &
2895	TRIM( host ), '"'
2896	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2897	ENDIF
2898	ENDIF
2899
2900	!
2901	!-- Check pressure gradient conditions
2902	IF ( dp_external .AND. conserve_volume_flow ) THEN
2903	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2904	' are .TRUE. but one of them must be .FALSE.'
2905	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2906	ENDIF
2907	IF ( dp_external ) THEN
2908	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2909	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2910	' of range'
2911	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2912	ENDIF
2913	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2914	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2915	', i.e. the external pressure gradient & will not be applied'
2916	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2917	ENDIF
2918	ENDIF
2919	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2920	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2921	'.FALSE., i.e. the external pressure gradient & will not be applied'
2922	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2923	ENDIF
2924	IF ( conserve_volume_flow ) THEN
2925	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2926	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2927	conserve_volume_flow_mode = 'inflow_profile'
2928	ELSE
2929	conserve_volume_flow_mode = 'initial_profiles'
2930	ENDIF
2931	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2932	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2933	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2934	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2935	conserve_volume_flow_mode
2936	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2937	ENDIF
2938	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2939	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2940	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2941	'require & conserve_volume_flow_mode = ''inflow_profile'''
2942	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2943	ENDIF
2944	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2945	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2946	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2947	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2948	' or ''bulk_velocity'''
2949	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2950	ENDIF
2951	ENDIF
2952	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2953	( .NOT. conserve_volume_flow .OR. &
2954	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2955	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2956	'conserve_volume_flow = .T. and & ', &
2957	'conserve_volume_flow_mode = ''bulk_velocity'''
2958	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2959	ENDIF
2960
2961	!
2962	!-- Check particle attributes
2963	IF ( particle_color /= 'none' ) THEN
2964	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
2965	particle_color /= 'z' ) THEN
2966	message_string = 'illegal value for parameter particle_color: ' // &
2967	TRIM( particle_color)
2968	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
2969	ELSE
2970	IF ( color_interval(2) <= color_interval(1) ) THEN
2971	message_string = 'color_interval(2) <= color_interval(1)'
2972	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
2973	ENDIF
2974	ENDIF
2975	ENDIF
2976
2977	IF ( particle_dvrpsize /= 'none' ) THEN
2978	IF ( particle_dvrpsize /= 'absw' ) THEN
2979	message_string = 'illegal value for parameter particle_dvrpsize:' // &
2980	' ' // TRIM( particle_color)
2981	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
2982	ELSE
2983	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
2984	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
2985	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
2986	ENDIF
2987	ENDIF
2988	ENDIF
2989
2990	!
2991	!-- Check &userpar parameters
2992	CALL user_check_parameters
2993
2994
2995	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |