Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1301

Last change on this file since 1301 was 1300, checked in by heinze, 10 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 145.6 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1242]	22	!
[1300]	23	!
[1242]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1300 2014-03-06 13:18:34Z heinze $
	27	!
[1300]	28	! 1299 2014-03-06 13:15:21Z heinze
	29	! enable usage of large_scale subsidence in combination with large_scale_forcing
	30	! output for profile of large scale vertical velocity w_subs added
	31	!
[1277]	32	! 1276 2014-01-15 13:40:41Z heinze
	33	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
	34	!
[1242]	35	! 1241 2013-10-30 11:36:58Z heinze
[1241]	36	! output for profiles of ug and vg added
	37	! set surface_heatflux and surface_waterflux also in dependence on
	38	! large_scale_forcing
	39	! checks for nudging and large scale forcing from external file
[1054]	40	!
[1237]	41	! 1236 2013-09-27 07:21:13Z raasch
	42	! check number of spectra levels
	43	!
[1217]	44	! 1216 2013-08-26 09:31:42Z raasch
	45	! check for transpose_compute_overlap (temporary)
	46	!
[1215]	47	! 1214 2013-08-21 12:29:17Z kanani
	48	! additional check for simultaneous use of vertical grid stretching
	49	! and particle advection
	50	!
[1213]	51	! 1212 2013-08-15 08:46:27Z raasch
	52	! checks for poisfft_hybrid removed
	53	!
[1211]	54	! 1210 2013-08-14 10:58:20Z raasch
	55	! check for fftw
	56	!
[1182]	57	! 1179 2013-06-14 05:57:58Z raasch
	58	! checks and settings of buoyancy parameters and switches revised,
	59	! initial profile for rho added to hom (id=77)
	60	!
[1175]	61	! 1174 2013-05-31 10:28:08Z gryschka
	62	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
	63	!
[1160]	64	! 1159 2013-05-21 11:58:22Z fricke
	65	! bc_lr/ns_dirneu/neudir removed
	66	!
[1116]	67	! 1115 2013-03-26 18:16:16Z hoffmann
	68	! unused variables removed
	69	! drizzle can be used without precipitation
	70	!
[1112]	71	! 1111 2013-03-08 23:54:10Z raasch
	72	! ibc_p_b = 2 removed
	73	!
[1104]	74	! 1103 2013-02-20 02:15:53Z raasch
	75	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
	76	!
[1093]	77	! 1092 2013-02-02 11:24:22Z raasch
	78	! unused variables removed
	79	!
[1070]	80	! 1069 2012-11-28 16:18:43Z maronga
	81	! allow usage of topography in combination with cloud physics
	82	!
[1066]	83	! 1065 2012-11-22 17:42:36Z hoffmann
	84	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	85	! precipitation in order to save computational resources.
	86	!
[1061]	87	! 1060 2012-11-21 07:19:51Z raasch
	88	! additional check for parameter turbulent_inflow
	89	!
[1054]	90	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	91	! necessary changes for the new two-moment cloud physics scheme added:
	92	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	93	! - plant_canopy is not allowed
	94	! - currently, only cache loop_optimization is allowed
	95	! - initial profiles of nr, qr
	96	! - boundary condition of nr, qr
	97	! - check output quantities (qr, nr, prr)
[979]	98	!
[1037]	99	! 1036 2012-10-22 13:43:42Z raasch
	100	! code put under GPL (PALM 3.9)
	101	!
[1035]	102	! 1031/1034 2012-10-22 11:32:49Z raasch
	103	! check of netcdf4 parallel file support
	104	!
[1020]	105	! 1019 2012-09-28 06:46:45Z raasch
	106	! non-optimized version of prognostic_equations not allowed any more
	107	!
[1017]	108	! 1015 2012-09-27 09:23:24Z raasch
	109	! acc allowed for loop optimization,
	110	! checks for adjustment of mixing length to the Prandtl mixing length removed
	111	!
[1004]	112	! 1003 2012-09-14 14:35:53Z raasch
	113	! checks for cases with unequal subdomain sizes removed
	114	!
[1002]	115	! 1001 2012-09-13 14:08:46Z raasch
	116	! all actions concerning leapfrog- and upstream-spline-scheme removed
	117	!
[997]	118	! 996 2012-09-07 10:41:47Z raasch
	119	! little reformatting
[1001]	120
[979]	121	! 978 2012-08-09 08:28:32Z fricke
[978]	122	! setting of bc_lr/ns_dirneu/neudir
	123	! outflow damping layer removed
	124	! check for z0h*
	125	! check for pt_damping_width
[667]	126	!
[965]	127	! 964 2012-07-26 09:14:24Z raasch
	128	! check of old profil-parameters removed
	129	!
[941]	130	! 940 2012-07-09 14:31:00Z raasch
	131	! checks for parameter neutral
	132	!
[925]	133	! 924 2012-06-06 07:44:41Z maronga
	134	! Bugfix: preprocessor directives caused error during compilation
	135	!
[893]	136	! 892 2012-05-02 13:51:44Z maronga
	137	! Bugfix for parameter file check ( excluding __netcdf4 )
	138	!
[867]	139	! 866 2012-03-28 06:44:41Z raasch
	140	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	141	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	142	! timestep
	143	!
[863]	144	! 861 2012-03-26 14:18:34Z suehring
	145	! Check for topography and ws-scheme removed.
	146	! Check for loop_optimization = 'vector' and ws-scheme removed.
	147	!
[846]	148	! 845 2012-03-07 10:23:05Z maronga
	149	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	150	!
[829]	151	! 828 2012-02-21 12:00:36Z raasch
	152	! check of collision_kernel extended
	153	!
[826]	154	! 825 2012-02-19 03:03:44Z raasch
	155	! check for collision_kernel and curvature_solution_effects
	156	!
[810]	157	! 809 2012-01-30 13:32:58Z maronga
	158	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	159	!
[808]	160	! 807 2012-01-25 11:53:51Z maronga
	161	! New cpp directive "__check" implemented which is used by check_namelist_files
	162	!
[775]	163	! 774 2011-10-27 13:34:16Z letzel
	164	! bugfix for prescribed u,v-profiles
	165	!
[768]	166	! 767 2011-10-14 06:39:12Z raasch
	167	! Calculating u,v-profiles from given profiles by linear interpolation.
	168	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	169	!
[708]	170	! 707 2011-03-29 11:39:40Z raasch
	171	! setting of bc_lr/ns_dirrad/raddir
	172	!
	173	! 689 2011-02-20 19:31:12z gryschka
[690]	174	! Bugfix for some logical expressions
	175	! (syntax was not compatible with all compilers)
[687]	176	!
[690]	177	! 680 2011-02-04 23:16:06Z gryschka
[681]	178	! init_vortex is not allowed with volume_flow_control
[668]	179	!
[674]	180	! 673 2011-01-18 16:19:48Z suehring
	181	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	182	!
[668]	183	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	184	! Exchange of parameters between ocean and atmosphere via PE0
	185	! Check for illegal combination of ws-scheme and timestep scheme.
	186	! Check for topography and ws-scheme.
	187	! Check for not cyclic boundary conditions in combination with ws-scheme and
	188	! loop_optimization = 'vector'.
	189	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	190	! Different processor/grid topology in atmosphere and ocean is now allowed!
	191	! Bugfixes in checking for conserve_volume_flow_mode
[601]	192	! 600 2010-11-24 16:10:51Z raasch
	193	! change due to new default value of surface_waterflux
[581]	194	! 580 2010-10-05 13:59:11Z heinze
[601]	195	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	196	!
[568]	197	! 567 2010-10-01 10:46:30Z helmke
	198	! calculating masks changed
	199	!
[565]	200	! 564 2010-09-30 13:18:59Z helmke
	201	! palm message identifiers of masked output changed, 20 replaced by max_masks
	202	!
[554]	203	! 553 2010-09-01 14:09:06Z weinreis
	204	! masks is calculated and removed from inipar
[532]	205	!
	206	! 531 2010-04-21 06:47:21Z heinze
	207	! Bugfix: unit of hyp changed to dbar
[392]	208	!
[525]	209	! 524 2010-03-30 02:04:51Z raasch
	210	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	211	!
[494]	212	! 493 2010-03-01 08:30:24Z raasch
	213	! netcdf_data_format is checked
	214	!
[449]	215	! 411 2009-12-11 14:15:58Z heinze
	216	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	217	! Initialization of large scale vertical motion (subsidence/ascent)
	218	!
	219	! 410 2009-12-04 17:05:40Z letzel
	220	! masked data output
	221	!
[392]	222	! 388 2009-09-23 09:40:33Z raasch
[388]	223	! Check profiles fpr prho and hyp.
[376]	224	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	225	! interval has been set, respective error message is included
[366]	226	! bc_lr_cyc and bc_ns_cyc are set,
[328]	227	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	228	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	229	! Coupling with independent precursor runs.
[264]	230	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	231	! Bugfix: pressure included for profile output
[240]	232	! Check pressure gradient conditions
[256]	233	! topography_grid_convention moved from user_check_parameters
	234	! 'single_street_canyon'
[367]	235	! Added shf* and qsws* to the list of available output data
[226]	236	!
	237	! 222 2009-01-12 16:04:16Z letzel
[217]	238	! +user_check_parameters
[213]	239	! Output of messages replaced by message handling routine.
[206]	240	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	241	! deleted __mpi2 directives
[222]	242	! Check that PALM is called with mrun -K parallel for coupling
[198]	243	!
	244	! 197 2008-09-16 15:29:03Z raasch
[177]	245	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	246	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	247	!
	248	! Strict grid matching along z is not needed for mg-solver.
[153]	249	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	250	! Case of reading data for recycling included in initializing_actions,
[197]	251	! check of turbulent_inflow and calculation of recycling_plane.
	252	! q*2 profile added
[139]	253	!
	254	! 138 2007-11-28 10:03:58Z letzel
[138]	255	! Plant canopy added
[132]	256	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	257	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	258	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	259	!
	260	! 109 2007-08-28 15:26:47Z letzel
[102]	261	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	262	! conditions for temperature and fluxes) in case of coupled runs.
	263	! +profiles for wp and w"e
[104]	264	! Bugfix: Error message concerning output of particle concentration (pc)
	265	! modified
[108]	266	! More checks and more default values for coupled runs
	267	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	268	! cloud_physics = .T.)
	269	! Rayleigh damping for ocean fixed.
[109]	270	! Check and, if necessary, set default value for dt_coupling
[98]	271	!
	272	! 97 2007-06-21 08:23:15Z raasch
[97]	273	! Initial salinity profile is calculated, salinity boundary conditions are
	274	! checked,
[94]	275	! z_max_do1d is checked only in case of ocean = .f.,
[97]	276	! +initial temperature and geostrophic velocity profiles for the ocean version,
	277	! use_pt_reference renamed use_reference
[77]	278	!
[90]	279	! 89 2007-05-25 12:08:31Z raasch
	280	! Check for user-defined profiles
	281	!
[77]	282	! 75 2007-03-22 09:54:05Z raasch
[51]	283	! "by_user" allowed as initializing action, -data_output_ts,
[63]	284	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	285	! and pt_reference are checked, moisture renamed humidity,
[72]	286	! output of precipitation amount/rate and roughnes length + check
[73]	287	! possible negative humidities are avoided in initial profile,
[75]	288	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	289	! revision added to run_description_header
[1]	290	!
[39]	291	! 20 2007-02-26 00:12:32Z raasch
	292	! Temperature and humidity gradients at top are now calculated for nzt+1,
	293	! top_heatflux and respective boundary condition bc_pt_t is checked
	294	!
[3]	295	! RCS Log replace by Id keyword, revision history cleaned up
	296	!
[1]	297	! Revision 1.61 2006/08/04 14:20:25 raasch
	298	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	299	! use_upstream_for_tke, default value for dt_dopts,
	300	! generation of file header moved from routines palm and header to here
	301	!
	302	! Revision 1.1 1997/08/26 06:29:23 raasch
	303	! Initial revision
	304	!
	305	!
	306	! Description:
	307	! ------------
	308	! Check control parameters and deduce further quantities.
	309	!------------------------------------------------------------------------------!
	310
	311	USE arrays_3d
[824]	312	USE cloud_parameters
[1]	313	USE constants
	314	USE control_parameters
[264]	315	USE dvrp_variables
[1]	316	USE grid_variables
	317	USE indices
	318	USE model_1d
	319	USE netcdf_control
	320	USE particle_attributes
	321	USE pegrid
	322	USE profil_parameter
[1236]	323	USE spectrum
	324	USE statistics
[411]	325	USE subsidence_mod
[1241]	326	USE statistics
[1]	327	USE transpose_indices
	328
	329	IMPLICIT NONE
	330
	331	CHARACTER (LEN=1) :: sq
	332	CHARACTER (LEN=6) :: var
	333	CHARACTER (LEN=7) :: unit
	334	CHARACTER (LEN=8) :: date
	335	CHARACTER (LEN=10) :: time
[102]	336	CHARACTER (LEN=40) :: coupling_string
[1]	337	CHARACTER (LEN=100) :: action
	338
[1092]	339	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	340	LOGICAL :: found, ldum
[1092]	341	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	342
	343	!
[1216]	344	!-- Check for overlap combinations, which are not realized yet
	345	IF ( transpose_compute_overlap ) THEN
	346	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
	347	#if defined( __openacc )
	348	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
	349	#endif
	350	ENDIF
	351
	352	!
[1]	353	!-- Warning, if host is not set
	354	IF ( host(1:1) == ' ' ) THEN
[213]	355	message_string = '"host" is not set. Please check that environment ' // &
	356	'variable "localhost" & is set before running PALM'
[226]	357	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	358	ENDIF
	359
	360	!
[102]	361	!-- Check the coupling mode
	362	IF ( coupling_mode /= 'uncoupled' .AND. &
	363	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	364	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	365	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	366	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	367	ENDIF
	368
	369	!
[108]	370	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	371	IF ( coupling_mode /= 'uncoupled') THEN
[213]	372
[108]	373	IF ( dt_coupling == 9999999.9 ) THEN
[213]	374	message_string = 'dt_coupling is not set but required for coup' // &
	375	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	376	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	377	ENDIF
[213]	378
[206]	379	#if defined( __parallel )
[807]	380
	381	!
	382	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	383	!-- program.
	384	!-- check_namelist_files will need the following information of the other
	385	!-- model (atmosphere/ocean).
[845]	386	! dt_coupling = remote
	387	! dt_max = remote
	388	! restart_time = remote
	389	! dt_restart= remote
	390	! simulation_time_since_reference = remote
	391	! dx = remote
[807]	392
	393
[809]	394	#if ! defined( __check )
[667]	395	IF ( myid == 0 ) THEN
	396	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	397	ierr )
	398	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	399	status, ierr )
	400	ENDIF
	401	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	402	#endif
[108]	403	IF ( dt_coupling /= remote ) THEN
[213]	404	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	405	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	406	'dt_coupling_remote = ', remote
[226]	407	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	408	ENDIF
[109]	409	IF ( dt_coupling <= 0.0 ) THEN
[809]	410	#if ! defined( __check )
[667]	411	IF ( myid == 0 ) THEN
	412	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	413	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	414	status, ierr )
	415	ENDIF
	416	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	417	#endif
[109]	418	dt_coupling = MAX( dt_max, remote )
[213]	419	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	420	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	421	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	422	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	423	ENDIF
[809]	424	#if ! defined( __check )
[667]	425	IF ( myid == 0 ) THEN
	426	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	427	ierr )
	428	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	429	status, ierr )
	430	ENDIF
	431	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	432	#endif
[108]	433	IF ( restart_time /= remote ) THEN
[213]	434	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	435	'": restart_time = ', restart_time, '& is not equal to ', &
	436	'restart_time_remote = ', remote
[226]	437	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	438	ENDIF
[809]	439	#if ! defined( __check )
[667]	440	IF ( myid == 0 ) THEN
	441	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	442	ierr )
	443	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	444	status, ierr )
	445	ENDIF
	446	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	447	#endif
[108]	448	IF ( dt_restart /= remote ) THEN
[213]	449	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	450	'": dt_restart = ', dt_restart, '& is not equal to ', &
	451	'dt_restart_remote = ', remote
[226]	452	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	453	ENDIF
[213]	454
[291]	455	simulation_time_since_reference = end_time - coupling_start_time
[809]	456	#if ! defined( __check )
[667]	457	IF ( myid == 0 ) THEN
	458	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	459	14, comm_inter, ierr )
	460	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	461	status, ierr )
	462	ENDIF
	463	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	464	#endif
[291]	465	IF ( simulation_time_since_reference /= remote ) THEN
[213]	466	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	467	'": simulation_time_since_reference = ', &
	468	simulation_time_since_reference, '& is not equal to ', &
	469	'simulation_time_since_reference_remote = ', remote
[226]	470	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	471	ENDIF
[213]	472
[809]	473	#if ! defined( __check )
[667]	474	IF ( myid == 0 ) THEN
	475	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	476	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	477	status, ierr )
[108]	478	ENDIF
[667]	479	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	480
[807]	481	#endif
[667]	482	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	483
	484	IF ( dx < remote ) THEN
	485	WRITE( message_string, * ) 'coupling mode "', &
	486	TRIM( coupling_mode ), &
	487	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	488	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	489	ENDIF
	490
	491	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	492	WRITE( message_string, * ) 'coupling mode "', &
	493	TRIM( coupling_mode ), &
	494	'": Domain size in x-direction is not equal in ocean and atmosphere'
	495	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	496	ENDIF
	497
[108]	498	ENDIF
[213]	499
[809]	500	#if ! defined( __check )
[667]	501	IF ( myid == 0) THEN
	502	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	503	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	504	status, ierr )
[108]	505	ENDIF
[667]	506	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	507	#endif
[667]	508	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	509
	510	IF ( dy < remote ) THEN
	511	WRITE( message_string, * ) 'coupling mode "', &
	512	TRIM( coupling_mode ), &
	513	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	514	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	515	ENDIF
	516
	517	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	518	WRITE( message_string, * ) 'coupling mode "', &
	519	TRIM( coupling_mode ), &
	520	'": Domain size in y-direction is not equal in ocean and atmosphere'
	521	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	522	ENDIF
	523
	524	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	525	WRITE( message_string, * ) 'coupling mode "', &
	526	TRIM( coupling_mode ), &
	527	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	528	' atmosphere'
	529	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	530	ENDIF
	531
	532	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	533	WRITE( message_string, * ) 'coupling mode "', &
	534	TRIM( coupling_mode ), &
	535	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	536	' atmosphere'
	537	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	538	ENDIF
	539
[108]	540	ENDIF
[222]	541	#else
	542	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	543	' ''mrun -K parallel'''
[226]	544	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	545	#endif
	546	ENDIF
	547
[809]	548	#if defined( __parallel ) && ! defined ( __check )
[108]	549	!
	550	!-- Exchange via intercommunicator
[667]	551	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	552	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	553	ierr )
[667]	554	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	555	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	556	comm_inter, status, ierr )
[108]	557	ENDIF
[667]	558	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	559
[108]	560	#endif
	561
	562
	563	!
[1]	564	!-- Generate the file header which is used as a header for most of PALM's
	565	!-- output files
	566	CALL DATE_AND_TIME( date, time )
	567	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	568	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	569	IF ( coupling_mode == 'uncoupled' ) THEN
	570	coupling_string = ''
	571	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	572	coupling_string = ' coupled (atmosphere)'
	573	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	574	coupling_string = ' coupled (ocean)'
	575	ENDIF
[1]	576
[102]	577	WRITE ( run_description_header, &
	578	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	579	TRIM( version ), TRIM( revision ), 'run: ', &
	580	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	581	'host: ', TRIM( host ), run_date, run_time
[1]	582
	583	!
[63]	584	!-- Check the general loop optimization method
	585	IF ( loop_optimization == 'default' ) THEN
	586	IF ( host(1:3) == 'nec' ) THEN
	587	loop_optimization = 'vector'
	588	ELSE
	589	loop_optimization = 'cache'
	590	ENDIF
	591	ENDIF
	592
[1015]	593	SELECT CASE ( TRIM( loop_optimization ) )
	594
[1019]	595	CASE ( 'acc', 'cache', 'vector' )
[1015]	596	CONTINUE
	597
	598	CASE DEFAULT
	599	message_string = 'illegal value given for loop_optimization: "' // &
	600	TRIM( loop_optimization ) // '"'
	601	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	602
	603	END SELECT
	604
[63]	605	!
[1214]	606	!-- Check if vertical grid stretching is used together with particles
	607	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
	608	message_string = 'Vertical grid stretching is not allowed together ' // &
	609	'with particle advection.'
	610	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
	611	ENDIF
	612
	613	!
[1]	614	!-- Check topography setting (check for illegal parameter combinations)
	615	IF ( topography /= 'flat' ) THEN
	616	action = ' '
[861]	617	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	618	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	619	ENDIF
[861]	620	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	621	THEN
[1]	622	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	623	ENDIF
[114]	624	IF ( psolver == 'sor' ) THEN
[1]	625	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	626	ENDIF
	627	IF ( sloping_surface ) THEN
	628	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	629	ENDIF
	630	IF ( galilei_transformation ) THEN
	631	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	632	ENDIF
[1115]	633	IF ( cloud_physics ) THEN
	634	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	635	ENDIF
[1]	636	IF ( cloud_droplets ) THEN
[1115]	637	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
[1]	638	ENDIF
	639	IF ( .NOT. prandtl_layer ) THEN
	640	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	641	ENDIF
	642	IF ( action /= ' ' ) THEN
[213]	643	message_string = 'a non-flat topography does not allow ' // &
	644	TRIM( action )
[226]	645	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	646	ENDIF
[256]	647	!
	648	!-- In case of non-flat topography, check whether the convention how to
	649	!-- define the topography grid has been set correctly, or whether the default
	650	!-- is applicable. If this is not possible, abort.
	651	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	652	IF ( TRIM( topography ) /= 'single_building' .AND. &
	653	TRIM( topography ) /= 'single_street_canyon' .AND. &
	654	TRIM( topography ) /= 'read_from_file' ) THEN
	655	!-- The default value is not applicable here, because it is only valid
	656	!-- for the two standard cases 'single_building' and 'read_from_file'
	657	!-- defined in init_grid.
	658	WRITE( message_string, * ) &
	659	'The value for "topography_grid_convention" ', &
	660	'is not set. Its default value is & only valid for ', &
	661	'"topography" = ''single_building'', ', &
	662	'''single_street_canyon'' & or ''read_from_file''.', &
	663	' & Choose ''cell_edge'' or ''cell_center''.'
	664	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	665	ELSE
	666	!-- The default value is applicable here.
	667	!-- Set convention according to topography.
	668	IF ( TRIM( topography ) == 'single_building' .OR. &
	669	TRIM( topography ) == 'single_street_canyon' ) THEN
	670	topography_grid_convention = 'cell_edge'
	671	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	672	topography_grid_convention = 'cell_center'
	673	ENDIF
	674	ENDIF
	675	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	676	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	677	WRITE( message_string, * ) &
	678	'The value for "topography_grid_convention" is ', &
	679	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	680	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	681	ENDIF
	682
[1]	683	ENDIF
[94]	684
[1]	685	!
[94]	686	!-- Check ocean setting
	687	IF ( ocean ) THEN
[332]	688
[94]	689	action = ' '
	690	IF ( action /= ' ' ) THEN
[213]	691	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	692	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	693	ENDIF
	694
[332]	695	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	696	TRIM( coupling_char ) == '_O' ) THEN
[343]	697
[94]	698	!
[332]	699	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	700	!-- ocean run (this setting is done via mrun-option -y)
[343]	701
[291]	702	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	703	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	704	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	705
[291]	706	ENDIF
	707	!
[1053]	708	!-- Check cloud scheme
	709	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	710	icloud_scheme = 0
	711	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	712	icloud_scheme = 1
	713	ELSE
	714	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	715	TRIM( cloud_scheme ) // '"'
	716	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	717	ENDIF
	718	!
[1]	719	!-- Check whether there are any illegal values
	720	!-- Pressure solver:
[1212]	721	IF ( psolver /= 'poisfft' .AND. &
[1]	722	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	723	message_string = 'unknown solver for perturbation pressure: psolver' // &
	724	' = "' // TRIM( psolver ) // '"'
[226]	725	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	726	ENDIF
	727
	728	IF ( psolver == 'multigrid' ) THEN
	729	IF ( cycle_mg == 'w' ) THEN
	730	gamma_mg = 2
	731	ELSEIF ( cycle_mg == 'v' ) THEN
	732	gamma_mg = 1
	733	ELSE
[213]	734	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	735	TRIM( cycle_mg ) // '"'
[226]	736	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	737	ENDIF
	738	ENDIF
	739
	740	IF ( fft_method /= 'singleton-algorithm' .AND. &
	741	fft_method /= 'temperton-algorithm' .AND. &
[1210]	742	fft_method /= 'fftw' .AND. &
[1]	743	fft_method /= 'system-specific' ) THEN
[213]	744	message_string = 'unknown fft-algorithm: fft_method = "' // &
	745	TRIM( fft_method ) // '"'
[226]	746	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	747	ENDIF
[667]	748
	749	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	750	.NOT. call_psolver_at_all_substeps ) THEN
[667]	751	message_string = 'psolver must be called at each RK3 substep when "'//&
	752	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	753	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	754	END IF
[1]	755	!
	756	!-- Advection schemes:
[1001]	757	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	758	THEN
[214]	759	message_string = 'unknown advection scheme: momentum_advec = "' // &
	760	TRIM( momentum_advec ) // '"'
[226]	761	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	762	ENDIF
[1001]	763	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	764	.AND. ( timestep_scheme == 'euler' .OR. &
	765	timestep_scheme == 'runge-kutta-2' ) ) &
	766	THEN
[667]	767	message_string = 'momentum_advec or scalar_advec = "' &
	768	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	769	TRIM( timestep_scheme ) // '"'
[226]	770	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	771	ENDIF
[667]	772	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	773	scalar_advec /= 'bc-scheme' ) &
	774	THEN
[214]	775	message_string = 'unknown advection scheme: scalar_advec = "' // &
	776	TRIM( scalar_advec ) // '"'
[226]	777	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	778	ENDIF
[1019]	779	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	780	THEN
	781	message_string = 'advection_scheme scalar_advec = "' &
	782	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	783	TRIM( loop_optimization ) // '"'
	784	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	785	ENDIF
[1]	786
	787	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	788	use_upstream_for_tke = .TRUE.
[214]	789	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	790	'use_sgs_for_particles = .TRUE.'
[226]	791	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	792	ENDIF
	793
[824]	794	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	795	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	796	'curvature_solution_effects = .TRUE.'
	797	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	798	ENDIF
	799
[1]	800	!
[1019]	801	!-- Set LOGICAL switches to enhance performance
	802	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	803	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	804
	805	!
[1]	806	!-- Timestep schemes:
	807	SELECT CASE ( TRIM( timestep_scheme ) )
	808
	809	CASE ( 'euler' )
	810	intermediate_timestep_count_max = 1
	811
	812	CASE ( 'runge-kutta-2' )
	813	intermediate_timestep_count_max = 2
	814
	815	CASE ( 'runge-kutta-3' )
	816	intermediate_timestep_count_max = 3
	817
	818	CASE DEFAULT
[214]	819	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	820	TRIM( timestep_scheme ) // '"'
[226]	821	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	822
	823	END SELECT
	824
[667]	825	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	826	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	827	message_string = 'momentum advection scheme "' // &
	828	TRIM( momentum_advec ) // '" & does not work with ' // &
	829	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	830	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	831	ENDIF
	832
[825]	833	!
	834	!-- Collision kernels:
	835	SELECT CASE ( TRIM( collision_kernel ) )
	836
[828]	837	CASE ( 'hall', 'hall_fast' )
[825]	838	hall_kernel = .TRUE.
	839
	840	CASE ( 'palm' )
	841	palm_kernel = .TRUE.
	842
[828]	843	CASE ( 'wang', 'wang_fast' )
[825]	844	wang_kernel = .TRUE.
	845
	846	CASE ( 'none' )
	847
	848
	849	CASE DEFAULT
	850	message_string = 'unknown collision kernel: collision_kernel = "' // &
	851	TRIM( collision_kernel ) // '"'
	852	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	853
	854	END SELECT
[828]	855	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	856
[147]	857	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	858	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	859	!
[214]	860	!-- No restart run: several initialising actions are possible
[1]	861	action = initializing_actions
	862	DO WHILE ( TRIM( action ) /= '' )
	863	position = INDEX( action, ' ' )
	864	SELECT CASE ( action(1:position-1) )
	865
	866	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	867	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	868	action = action(position+1:)
	869
	870	CASE DEFAULT
[214]	871	message_string = 'initializing_action = "' // &
	872	TRIM( action ) // '" unkown or not allowed'
[226]	873	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	874
	875	END SELECT
	876	ENDDO
	877	ENDIF
[214]	878
[680]	879	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	880	conserve_volume_flow ) THEN
	881	message_string = 'initializing_actions = "initialize_vortex"' // &
	882	' ist not allowed with conserve_volume_flow = .T.'
	883	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	884	ENDIF
	885
	886
[1]	887	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	888	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	889	message_string = 'initializing_actions = "set_constant_profiles"' // &
	890	' and "set_1d-model_profiles" are not allowed ' // &
	891	'simultaneously'
[226]	892	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	893	ENDIF
[214]	894
[46]	895	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	896	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	897	message_string = 'initializing_actions = "set_constant_profiles"' // &
	898	' and "by_user" are not allowed simultaneously'
[226]	899	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	900	ENDIF
[214]	901
[46]	902	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	903	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	904	message_string = 'initializing_actions = "by_user" and ' // &
	905	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	906	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	907	ENDIF
[1]	908
[75]	909	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	910	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	911	'not allowed with humidity = ', humidity
[226]	912	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	913	ENDIF
	914
[72]	915	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	916	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	917	'not allowed with cloud_physics = ', cloud_physics
[226]	918	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	919	ENDIF
	920
[75]	921	IF ( humidity .AND. sloping_surface ) THEN
[214]	922	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	923	'are not allowed simultaneously'
[226]	924	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	925	ENDIF
	926
[75]	927	IF ( passive_scalar .AND. humidity ) THEN
[214]	928	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	929	'is not allowed simultaneously'
[226]	930	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	931	ENDIF
	932
[138]	933	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	934	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	935	'coefficient & given value is drag_coefficient = 0.0'
[226]	936	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	937	ENDIF
	938
[1053]	939	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	940	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	941	' seifert_beheng'
	942	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	943	ENDIF
	944
	945	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	946	icloud_scheme == 0 ) THEN
	947	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	948	'loop_optimization = cache'
	949	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	950	ENDIF
	951
[1115]	952	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	953	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
	954	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
	955	! 'precipitation = .TRUE. or drizzle = .TRUE.'
	956	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	957	! ENDIF
[1065]	958
[1]	959	!
	960	!-- In case of no model continuation run, check initialising parameters and
	961	!-- deduce further quantities
	962	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	963
	964	!
[767]	965	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	966	pt_init = pt_surface
[1053]	967	IF ( humidity ) THEN
	968	q_init = q_surface
	969	ENDIF
[94]	970	IF ( ocean ) sa_init = sa_surface
	971	IF ( passive_scalar ) q_init = s_surface
[138]	972	IF ( plant_canopy ) lad = 0.0
[1]	973
	974	!
	975	!--
	976	!-- If required, compute initial profile of the geostrophic wind
	977	!-- (component ug)
	978	i = 1
	979	gradient = 0.0
[97]	980
	981	IF ( .NOT. ocean ) THEN
	982
	983	ug_vertical_gradient_level_ind(1) = 0
	984	ug(0) = ug_surface
	985	DO k = 1, nzt+1
[177]	986	IF ( i < 11 ) THEN
	987	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	988	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	989	gradient = ug_vertical_gradient(i) / 100.0
	990	ug_vertical_gradient_level_ind(i) = k - 1
	991	i = i + 1
[1]	992	ENDIF
[177]	993	ENDIF
[97]	994	IF ( gradient /= 0.0 ) THEN
	995	IF ( k /= 1 ) THEN
	996	ug(k) = ug(k-1) + dzu(k) * gradient
	997	ELSE
[1174]	998	ug(k) = ug_surface + dzu(k) * gradient
[97]	999	ENDIF
[1]	1000	ELSE
[97]	1001	ug(k) = ug(k-1)
[1]	1002	ENDIF
[97]	1003	ENDDO
[1]	1004
[97]	1005	ELSE
	1006
	1007	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	1008	ug(nzt+1) = ug_surface
[667]	1009	DO k = nzt, nzb, -1
[177]	1010	IF ( i < 11 ) THEN
	1011	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	1012	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	1013	gradient = ug_vertical_gradient(i) / 100.0
	1014	ug_vertical_gradient_level_ind(i) = k + 1
	1015	i = i + 1
[97]	1016	ENDIF
	1017	ENDIF
	1018	IF ( gradient /= 0.0 ) THEN
	1019	IF ( k /= nzt ) THEN
	1020	ug(k) = ug(k+1) - dzu(k+1) * gradient
	1021	ELSE
	1022	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	1023	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	1024	ENDIF
	1025	ELSE
	1026	ug(k) = ug(k+1)
	1027	ENDIF
	1028	ENDDO
	1029
	1030	ENDIF
	1031
[1]	1032	!
[767]	1033	!-- In case of no given gradients for ug, choose a zero gradient
[97]	1034	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1035	ug_vertical_gradient_level(1) = 0.0
	1036	ENDIF
	1037
	1038	!
	1039	!--
	1040	!-- If required, compute initial profile of the geostrophic wind
	1041	!-- (component vg)
	1042	i = 1
	1043	gradient = 0.0
[97]	1044
	1045	IF ( .NOT. ocean ) THEN
	1046
	1047	vg_vertical_gradient_level_ind(1) = 0
	1048	vg(0) = vg_surface
	1049	DO k = 1, nzt+1
[177]	1050	IF ( i < 11 ) THEN
	1051	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1052	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1053	gradient = vg_vertical_gradient(i) / 100.0
	1054	vg_vertical_gradient_level_ind(i) = k - 1
	1055	i = i + 1
[1]	1056	ENDIF
	1057	ENDIF
[97]	1058	IF ( gradient /= 0.0 ) THEN
	1059	IF ( k /= 1 ) THEN
	1060	vg(k) = vg(k-1) + dzu(k) * gradient
	1061	ELSE
[1174]	1062	vg(k) = vg_surface + dzu(k) * gradient
[97]	1063	ENDIF
[1]	1064	ELSE
[97]	1065	vg(k) = vg(k-1)
[1]	1066	ENDIF
[97]	1067	ENDDO
[1]	1068
[97]	1069	ELSE
	1070
[121]	1071	vg_vertical_gradient_level_ind(1) = nzt+1
	1072	vg(nzt+1) = vg_surface
[667]	1073	DO k = nzt, nzb, -1
[177]	1074	IF ( i < 11 ) THEN
	1075	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1076	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1077	gradient = vg_vertical_gradient(i) / 100.0
	1078	vg_vertical_gradient_level_ind(i) = k + 1
	1079	i = i + 1
[97]	1080	ENDIF
	1081	ENDIF
	1082	IF ( gradient /= 0.0 ) THEN
	1083	IF ( k /= nzt ) THEN
	1084	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1085	ELSE
	1086	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1087	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1088	ENDIF
	1089	ELSE
	1090	vg(k) = vg(k+1)
	1091	ENDIF
	1092	ENDDO
	1093
	1094	ENDIF
	1095
[1]	1096	!
[767]	1097	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1098	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1099	vg_vertical_gradient_level(1) = 0.0
	1100	ENDIF
	1101
	1102	!
[767]	1103	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1104	!-- interpolate them from wind profile data (if given)
	1105	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1106
	1107	u_init = ug
	1108	v_init = vg
	1109
	1110	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1111
	1112	IF ( uv_heights(1) /= 0.0 ) THEN
	1113	message_string = 'uv_heights(1) must be 0.0'
	1114	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1115	ENDIF
	1116
	1117	use_prescribed_profile_data = .TRUE.
	1118
	1119	kk = 1
	1120	u_init(0) = 0.0
	1121	v_init(0) = 0.0
	1122
	1123	DO k = 1, nz+1
	1124
	1125	IF ( kk < 100 ) THEN
	1126	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1127	kk = kk + 1
	1128	IF ( kk == 100 ) EXIT
	1129	ENDDO
	1130	ENDIF
	1131
[774]	1132	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1133	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1134	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1135	( u_profile(kk+1) - u_profile(kk) )
	1136	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1137	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1138	( v_profile(kk+1) - v_profile(kk) )
	1139	ELSE
	1140	u_init(k) = u_profile(kk)
	1141	v_init(k) = v_profile(kk)
	1142	ENDIF
	1143
	1144	ENDDO
	1145
	1146	ELSE
	1147
	1148	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1149	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1150
	1151	ENDIF
	1152
	1153	!
[94]	1154	!-- Compute initial temperature profile using the given temperature gradients
[940]	1155	IF ( .NOT. neutral ) THEN
[94]	1156
[940]	1157	i = 1
	1158	gradient = 0.0
[94]	1159
[940]	1160	IF ( .NOT. ocean ) THEN
	1161
	1162	pt_vertical_gradient_level_ind(1) = 0
	1163	DO k = 1, nzt+1
	1164	IF ( i < 11 ) THEN
	1165	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1166	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1167	gradient = pt_vertical_gradient(i) / 100.0
	1168	pt_vertical_gradient_level_ind(i) = k - 1
	1169	i = i + 1
	1170	ENDIF
[1]	1171	ENDIF
[940]	1172	IF ( gradient /= 0.0 ) THEN
	1173	IF ( k /= 1 ) THEN
	1174	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1175	ELSE
[1174]	1176	pt_init(k) = pt_surface + dzu(k) * gradient
[940]	1177	ENDIF
[94]	1178	ELSE
[940]	1179	pt_init(k) = pt_init(k-1)
[94]	1180	ENDIF
[940]	1181	ENDDO
[1]	1182
[940]	1183	ELSE
[94]	1184
[940]	1185	pt_vertical_gradient_level_ind(1) = nzt+1
	1186	DO k = nzt, 0, -1
	1187	IF ( i < 11 ) THEN
	1188	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1189	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1190	gradient = pt_vertical_gradient(i) / 100.0
	1191	pt_vertical_gradient_level_ind(i) = k + 1
	1192	i = i + 1
	1193	ENDIF
[94]	1194	ENDIF
[940]	1195	IF ( gradient /= 0.0 ) THEN
	1196	IF ( k /= nzt ) THEN
	1197	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1198	ELSE
	1199	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1200	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1201	ENDIF
[94]	1202	ELSE
[940]	1203	pt_init(k) = pt_init(k+1)
[94]	1204	ENDIF
[940]	1205	ENDDO
[94]	1206
[940]	1207	ENDIF
	1208
[94]	1209	ENDIF
	1210
[1]	1211	!
	1212	!-- In case of no given temperature gradients, choose gradient of neutral
	1213	!-- stratification
[94]	1214	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1215	pt_vertical_gradient_level(1) = 0.0
	1216	ENDIF
	1217
	1218	!
[94]	1219	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1220	!-- boundary condition
[19]	1221	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1222
	1223	!
	1224	!-- If required, compute initial humidity or scalar profile using the given
	1225	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1226	!-- values of the scalar parameters on humidity parameters
	1227	IF ( passive_scalar ) THEN
	1228	bc_q_b = bc_s_b
	1229	bc_q_t = bc_s_t
	1230	q_surface = s_surface
	1231	q_surface_initial_change = s_surface_initial_change
	1232	q_vertical_gradient = s_vertical_gradient
	1233	q_vertical_gradient_level = s_vertical_gradient_level
	1234	surface_waterflux = surface_scalarflux
[407]	1235	wall_humidityflux = wall_scalarflux
[1]	1236	ENDIF
	1237
[75]	1238	IF ( humidity .OR. passive_scalar ) THEN
[1]	1239
	1240	i = 1
	1241	gradient = 0.0
	1242	q_vertical_gradient_level_ind(1) = 0
	1243	DO k = 1, nzt+1
[177]	1244	IF ( i < 11 ) THEN
	1245	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1246	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1247	gradient = q_vertical_gradient(i) / 100.0
	1248	q_vertical_gradient_level_ind(i) = k - 1
	1249	i = i + 1
[1]	1250	ENDIF
	1251	ENDIF
	1252	IF ( gradient /= 0.0 ) THEN
	1253	IF ( k /= 1 ) THEN
	1254	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1255	ELSE
[1174]	1256	q_init(k) = q_init(k-1) + dzu(k) * gradient
[1]	1257	ENDIF
	1258	ELSE
	1259	q_init(k) = q_init(k-1)
	1260	ENDIF
[72]	1261	!
	1262	!-- Avoid negative humidities
	1263	IF ( q_init(k) < 0.0 ) THEN
	1264	q_init(k) = 0.0
	1265	ENDIF
[1]	1266	ENDDO
	1267
	1268	!
	1269	!-- In case of no given humidity gradients, choose zero gradient
	1270	!-- conditions
	1271	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1272	q_vertical_gradient_level(1) = 0.0
	1273	ENDIF
	1274	!
[1053]	1275	!-- Store humidity, rain water content and rain drop concentration
	1276	!-- gradient at the top boundary for possile Neumann boundary condition
	1277	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1278	ENDIF
	1279
[94]	1280	!
	1281	!-- If required, compute initial salinity profile using the given salinity
	1282	!-- gradients
	1283	IF ( ocean ) THEN
	1284
	1285	i = 1
	1286	gradient = 0.0
	1287
	1288	sa_vertical_gradient_level_ind(1) = nzt+1
	1289	DO k = nzt, 0, -1
[177]	1290	IF ( i < 11 ) THEN
	1291	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1292	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1293	gradient = sa_vertical_gradient(i) / 100.0
	1294	sa_vertical_gradient_level_ind(i) = k + 1
	1295	i = i + 1
[94]	1296	ENDIF
	1297	ENDIF
	1298	IF ( gradient /= 0.0 ) THEN
	1299	IF ( k /= nzt ) THEN
	1300	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1301	ELSE
	1302	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1303	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1304	ENDIF
	1305	ELSE
	1306	sa_init(k) = sa_init(k+1)
	1307	ENDIF
	1308	ENDDO
	1309
	1310	ENDIF
	1311
[138]	1312	!
[388]	1313	!-- If required compute the profile of leaf area density used in the plant
	1314	!-- canopy model
[138]	1315	IF ( plant_canopy ) THEN
	1316
	1317	i = 1
	1318	gradient = 0.0
[1]	1319
[138]	1320	IF ( .NOT. ocean ) THEN
[153]	1321
	1322	lad(0) = lad_surface
[138]	1323
	1324	lad_vertical_gradient_level_ind(1) = 0
	1325	DO k = 1, pch_index
[177]	1326	IF ( i < 11 ) THEN
	1327	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1328	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1329	gradient = lad_vertical_gradient(i)
	1330	lad_vertical_gradient_level_ind(i) = k - 1
	1331	i = i + 1
[138]	1332	ENDIF
	1333	ENDIF
	1334	IF ( gradient /= 0.0 ) THEN
	1335	IF ( k /= 1 ) THEN
	1336	lad(k) = lad(k-1) + dzu(k) * gradient
	1337	ELSE
[1174]	1338	lad(k) = lad_surface + dzu(k) *gradient
[138]	1339	ENDIF
	1340	ELSE
	1341	lad(k) = lad(k-1)
	1342	ENDIF
	1343	ENDDO
	1344
	1345	ENDIF
	1346
[1]	1347	!
[388]	1348	!-- In case of no given leaf area density gradients, choose a vanishing
	1349	!-- gradient
[138]	1350	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1351	lad_vertical_gradient_level(1) = 0.0
	1352	ENDIF
	1353
	1354	ENDIF
	1355
	1356	ENDIF
[411]	1357
	1358	!
	1359	!-- Initialize large scale subsidence if required
[1299]	1360	If ( large_scale_subsidence ) THEN
	1361	IF ( subs_vertical_gradient_level(1) /= -9999999.9 .AND. &
	1362	.NOT. large_scale_forcing ) THEN
	1363	CALL init_w_subsidence
	1364	ENDIF
	1365	!
	1366	!-- In case large_scale_forcing is used, profiles for subsidence velocity
	1367	!-- are read in from file LSF_DATA
[667]	1368
[1299]	1369	IF ( subs_vertical_gradient_level(1) == -9999999.9 .AND. &
	1370	.NOT. large_scale_forcing ) THEN
	1371	message_string = 'There is no default large scale vertical ' // &
	1372	'velocity profile set. Specify the subsidence ' // &
	1373	'velocity profile via subs_vertical_gradient and ' // &
	1374	'subs_vertical_gradient_level.'
	1375	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
	1376	ENDIF
	1377	ELSE
	1378	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
	1379	message_string = 'Enable usage of large scale subsidence by ' // &
	1380	'setting large_scale_subsidence = .T..'
	1381	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
	1382	ENDIF
	1383	ENDIF
	1384
[138]	1385	!
[1]	1386	!-- Compute Coriolis parameter
	1387	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1388	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1389
	1390	!
[1179]	1391	!-- Check and set buoyancy related parameters and switches
	1392	IF ( reference_state == 'horizontal_average' ) THEN
	1393	CONTINUE
	1394	ELSEIF ( reference_state == 'initial_profile' ) THEN
	1395	use_initial_profile_as_reference = .TRUE.
	1396	ELSEIF ( reference_state == 'single_value' ) THEN
	1397	use_single_reference_value = .TRUE.
	1398	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
	1399	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
	1400	ELSE
	1401	message_string = 'illegal value for reference_state: "' // &
	1402	TRIM( reference_state ) // '"'
	1403	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
	1404	ENDIF
[57]	1405
	1406	!
[1179]	1407	!-- Ocean runs always use reference values in the buoyancy term
	1408	IF ( ocean ) THEN
	1409	reference_state = 'single_value'
	1410	use_single_reference_value = .TRUE.
	1411	ENDIF
[97]	1412
	1413	!
	1414	!-- Sign of buoyancy/stability terms
	1415	IF ( ocean ) atmos_ocean_sign = -1.0
	1416
	1417	!
[108]	1418	!-- Ocean version must use flux boundary conditions at the top
	1419	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1420	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1421	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1422	ENDIF
[97]	1423
	1424	!
[1]	1425	!-- In case of a given slope, compute the relevant quantities
	1426	IF ( alpha_surface /= 0.0 ) THEN
	1427	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1428	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1429	' ) must be < 90.0'
[226]	1430	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1431	ENDIF
	1432	sloping_surface = .TRUE.
	1433	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1434	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1435	ENDIF
	1436
	1437	!
	1438	!-- Check time step and cfl_factor
	1439	IF ( dt /= -1.0 ) THEN
	1440	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1441	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1442	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1443	ENDIF
	1444	dt_3d = dt
	1445	dt_fixed = .TRUE.
	1446	ENDIF
	1447
	1448	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1449	IF ( cfl_factor == -1.0 ) THEN
[1001]	1450	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1451	cfl_factor = 0.8
[1001]	1452	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1453	cfl_factor = 0.9
[1]	1454	ELSE
[1001]	1455	cfl_factor = 0.9
[1]	1456	ENDIF
	1457	ELSE
[215]	1458	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1459	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1460	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1461	ENDIF
	1462	ENDIF
	1463
	1464	!
	1465	!-- Store simulated time at begin
	1466	simulated_time_at_begin = simulated_time
	1467
	1468	!
[291]	1469	!-- Store reference time for coupled runs and change the coupling flag,
	1470	!-- if ...
	1471	IF ( simulated_time == 0.0 ) THEN
	1472	IF ( coupling_start_time == 0.0 ) THEN
	1473	time_since_reference_point = 0.0
	1474	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1475	run_coupled = .FALSE.
	1476	ENDIF
	1477	ENDIF
	1478
	1479	!
[1]	1480	!-- Set wind speed in the Galilei-transformed system
	1481	IF ( galilei_transformation ) THEN
[1053]	1482	IF ( use_ug_for_galilei_tr .AND. &
	1483	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1484	ug_vertical_gradient(1) == 0.0 .AND. &
	1485	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1486	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1487	u_gtrans = ug_surface * 0.6
	1488	v_gtrans = vg_surface * 0.6
[1053]	1489	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1490	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1491	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1492	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1493	' with galilei transformation'
[226]	1494	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1495	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1496	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1497	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1498	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1499	' with galilei transformation'
[226]	1500	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1501	ELSE
[215]	1502	message_string = 'variable translation speed used for galilei-' // &
	1503	'transformation, which may cause & instabilities in stably ' // &
	1504	'stratified regions'
[226]	1505	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1506	ENDIF
	1507	ENDIF
	1508
	1509	!
	1510	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1511	!-- fluxes have to be used in the diffusion-terms
	1512	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1513
	1514	!
	1515	!-- Check boundary conditions and set internal variables:
	1516	!-- Lateral boundary conditions
[73]	1517	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[1159]	1518	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1519	message_string = 'unknown boundary condition: bc_lr = "' // &
	1520	TRIM( bc_lr ) // '"'
[226]	1521	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1522	ENDIF
[73]	1523	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[1159]	1524	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1525	message_string = 'unknown boundary condition: bc_ns = "' // &
	1526	TRIM( bc_ns ) // '"'
[226]	1527	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1528	ENDIF
	1529
	1530	!
[366]	1531	!-- Internal variables used for speed optimization in if clauses
[707]	1532	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1533	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1534	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1535	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1536	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1537	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1538
	1539	!
[1]	1540	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1541	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1542	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1543	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1544	IF ( psolver /= 'multigrid' ) THEN
[215]	1545	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1546	'psolver = "' // TRIM( psolver ) // '"'
[226]	1547	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1548	ENDIF
[667]	1549	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1550	momentum_advec /= 'ws-scheme') THEN
[215]	1551	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1552	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1553	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1554	ENDIF
[667]	1555	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1556	scalar_advec /= 'ws-scheme' ) THEN
[215]	1557	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1558	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1559	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1560	ENDIF
	1561	IF ( galilei_transformation ) THEN
[215]	1562	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1563	'galilei_transformation = .T.'
[226]	1564	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1565	ENDIF
	1566	ENDIF
	1567
	1568	!
	1569	!-- Bottom boundary condition for the turbulent Kinetic energy
	1570	IF ( bc_e_b == 'neumann' ) THEN
	1571	ibc_e_b = 1
	1572	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1573	ibc_e_b = 2
[1015]	1574	IF ( prandtl_layer ) THEN
	1575	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1576	TRIM( bc_e_b ) // '"'
[226]	1577	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1578	ENDIF
	1579	IF ( .NOT. prandtl_layer ) THEN
	1580	bc_e_b = 'neumann'
	1581	ibc_e_b = 1
[215]	1582	message_string = 'boundary condition bc_e_b changed to "' // &
	1583	TRIM( bc_e_b ) // '"'
[226]	1584	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1585	ENDIF
	1586	ELSE
[215]	1587	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1588	TRIM( bc_e_b ) // '"'
[226]	1589	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1590	ENDIF
	1591
	1592	!
	1593	!-- Boundary conditions for perturbation pressure
	1594	IF ( bc_p_b == 'dirichlet' ) THEN
	1595	ibc_p_b = 0
	1596	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1597	ibc_p_b = 1
	1598	ELSE
[215]	1599	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1600	TRIM( bc_p_b ) // '"'
[226]	1601	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1602	ENDIF
[1111]	1603
[1]	1604	IF ( bc_p_t == 'dirichlet' ) THEN
	1605	ibc_p_t = 0
	1606	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1607	ibc_p_t = 1
	1608	ELSE
[215]	1609	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1610	TRIM( bc_p_t ) // '"'
[226]	1611	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1612	ENDIF
	1613
	1614	!
	1615	!-- Boundary conditions for potential temperature
[102]	1616	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1617	ibc_pt_b = 2
[1]	1618	ELSE
[102]	1619	IF ( bc_pt_b == 'dirichlet' ) THEN
	1620	ibc_pt_b = 0
	1621	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1622	ibc_pt_b = 1
	1623	ELSE
[215]	1624	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1625	TRIM( bc_pt_b ) // '"'
[226]	1626	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1627	ENDIF
	1628	ENDIF
[102]	1629
[1]	1630	IF ( bc_pt_t == 'dirichlet' ) THEN
	1631	ibc_pt_t = 0
	1632	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1633	ibc_pt_t = 1
[19]	1634	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1635	ibc_pt_t = 2
[1]	1636	ELSE
[215]	1637	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1638	TRIM( bc_pt_t ) // '"'
[226]	1639	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1640	ENDIF
	1641
[1276]	1642	IF ( surface_heatflux == 9999999.9 ) THEN
	1643	constant_heatflux = .FALSE.
	1644	IF ( large_scale_forcing ) THEN
	1645	IF ( ibc_pt_b == 0 ) THEN
	1646	constant_heatflux = .FALSE.
	1647	ELSEIF ( ibc_pt_b == 1 ) THEN
	1648	constant_heatflux = .TRUE.
	1649	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	1650	surface_heatflux = shf_surf(1)
	1651	ENDIF
	1652	ENDIF
	1653	ENDIF
[1241]	1654	ELSE
[1276]	1655	constant_heatflux = .TRUE.
[1241]	1656	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	1657	large_scale_forcing ) THEN
[1276]	1658	surface_heatflux = shf_surf(1)
[1241]	1659	ENDIF
	1660	ENDIF
	1661
[20]	1662	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1663
	1664	IF ( neutral ) THEN
	1665
	1666	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1667	THEN
	1668	message_string = 'heatflux must not be set for pure neutral flow'
	1669	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1670	ENDIF
	1671
	1672	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1673	THEN
	1674	message_string = 'heatflux must not be set for pure neutral flow'
	1675	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1676	ENDIF
	1677
	1678	ENDIF
	1679
[103]	1680	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1681	top_momentumflux_v /= 9999999.9 ) THEN
	1682	constant_top_momentumflux = .TRUE.
	1683	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1684	top_momentumflux_v == 9999999.9 ) ) THEN
	1685	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1686	'must be set'
[226]	1687	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1688	ENDIF
[1]	1689
	1690	!
	1691	!-- A given surface temperature implies Dirichlet boundary condition for
	1692	!-- temperature. In this case specification of a constant heat flux is
	1693	!-- forbidden.
	1694	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1695	surface_heatflux /= 0.0 ) THEN
[215]	1696	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1697	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1698	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1699	ENDIF
	1700	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1701	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1702	'wed with pt_surface_initial_change (/=0) = ', &
	1703	pt_surface_initial_change
[226]	1704	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1705	ENDIF
	1706
	1707	!
[19]	1708	!-- A given temperature at the top implies Dirichlet boundary condition for
	1709	!-- temperature. In this case specification of a constant heat flux is
	1710	!-- forbidden.
	1711	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1712	top_heatflux /= 0.0 ) THEN
[215]	1713	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1714	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1715	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1716	ENDIF
	1717
	1718	!
[95]	1719	!-- Boundary conditions for salinity
	1720	IF ( ocean ) THEN
	1721	IF ( bc_sa_t == 'dirichlet' ) THEN
	1722	ibc_sa_t = 0
	1723	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1724	ibc_sa_t = 1
	1725	ELSE
[215]	1726	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1727	TRIM( bc_sa_t ) // '"'
[226]	1728	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1729	ENDIF
	1730
	1731	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1732	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1733	message_string = 'boundary condition: bc_sa_t = "' // &
	1734	TRIM( bc_sa_t ) // '" requires to set ' // &
	1735	'top_salinityflux'
[226]	1736	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1737	ENDIF
[95]	1738
	1739	!
	1740	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1741	!-- salinity. In this case specification of a constant salinity flux is
	1742	!-- forbidden.
	1743	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1744	top_salinityflux /= 0.0 ) THEN
[215]	1745	message_string = 'boundary condition: bc_sa_t = "' // &
	1746	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1747	'constant_top_salinityflux = .TRUE.'
[226]	1748	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1749	ENDIF
	1750
	1751	ENDIF
	1752
	1753	!
[75]	1754	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1755	!-- water content / scalar
[75]	1756	IF ( humidity .OR. passive_scalar ) THEN
	1757	IF ( humidity ) THEN
[1]	1758	sq = 'q'
	1759	ELSE
	1760	sq = 's'
	1761	ENDIF
	1762	IF ( bc_q_b == 'dirichlet' ) THEN
	1763	ibc_q_b = 0
	1764	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1765	ibc_q_b = 1
	1766	ELSE
[215]	1767	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1768	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1769	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1770	ENDIF
	1771	IF ( bc_q_t == 'dirichlet' ) THEN
	1772	ibc_q_t = 0
	1773	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1774	ibc_q_t = 1
	1775	ELSE
[215]	1776	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1777	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1778	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1779	ENDIF
	1780
[1276]	1781	IF ( surface_waterflux == 9999999.9 ) THEN
	1782	constant_waterflux = .FALSE.
	1783	IF ( large_scale_forcing ) THEN
	1784	IF ( ibc_q_b == 0 ) THEN
	1785	constant_waterflux = .FALSE.
	1786	ELSEIF ( ibc_q_b == 1 ) THEN
	1787	constant_waterflux = .TRUE.
	1788	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	1789	surface_waterflux = qsws_surf(1)
	1790	ENDIF
	1791	ENDIF
	1792	ENDIF
[1241]	1793	ELSE
[1276]	1794	constant_waterflux = .TRUE.
	1795	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	1796	large_scale_forcing ) THEN
	1797	surface_waterflux = qsws_surf(1)
	1798	ENDIF
[1241]	1799	ENDIF
[1]	1800
	1801	!
	1802	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1803	!-- humidity. In this case specification of a constant water flux is
[1]	1804	!-- forbidden.
	1805	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1806	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1807	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1808	'th prescribed surface flux'
[226]	1809	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1810	ENDIF
	1811	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1812	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1813	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1814	q_surface_initial_change
[226]	1815	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1816	ENDIF
[1053]	1817
[1]	1818	ENDIF
	1819	!
	1820	!-- Boundary conditions for horizontal components of wind speed
	1821	IF ( bc_uv_b == 'dirichlet' ) THEN
	1822	ibc_uv_b = 0
	1823	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1824	ibc_uv_b = 1
	1825	IF ( prandtl_layer ) THEN
[215]	1826	message_string = 'boundary condition: bc_uv_b = "' // &
	1827	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1828	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1829	ENDIF
	1830	ELSE
[215]	1831	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1832	TRIM( bc_uv_b ) // '"'
[226]	1833	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1834	ENDIF
[667]	1835	!
	1836	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1837	!-- assigned with the u and v values of the ocean surface
	1838	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1839	ibc_uv_b = 2
	1840	ENDIF
[215]	1841
[108]	1842	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1843	bc_uv_t = 'neumann'
[1]	1844	ibc_uv_t = 1
	1845	ELSE
[132]	1846	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1847	ibc_uv_t = 0
[767]	1848	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1849	!
	1850	!-- Velocities for the initial u,v-profiles are set zero at the top
	1851	!-- in case of dirichlet_0 conditions
	1852	u_init(nzt+1) = 0.0
	1853	v_init(nzt+1) = 0.0
	1854	ENDIF
[108]	1855	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1856	ibc_uv_t = 1
	1857	ELSE
[215]	1858	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1859	TRIM( bc_uv_t ) // '"'
[226]	1860	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1861	ENDIF
	1862	ENDIF
	1863
	1864	!
	1865	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1866	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1867	rayleigh_damping_factor = 0.0
[1]	1868	ELSE
	1869	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1870	THEN
[215]	1871	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1872	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1873	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1874	ENDIF
	1875	ENDIF
	1876
	1877	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1878	IF ( .NOT. ocean ) THEN
	1879	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1880	ELSE
	1881	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1882	ENDIF
[1]	1883	ELSE
[108]	1884	IF ( .NOT. ocean ) THEN
	1885	IF ( rayleigh_damping_height < 0.0 .OR. &
	1886	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1887	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1888	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1889	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1890	ENDIF
[108]	1891	ELSE
	1892	IF ( rayleigh_damping_height > 0.0 .OR. &
	1893	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1894	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1895	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1896	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1897	ENDIF
[1]	1898	ENDIF
	1899	ENDIF
	1900
	1901	!
	1902	!-- Check number of chosen statistic regions. More than 10 regions are not
	1903	!-- allowed, because so far no more than 10 corresponding output files can
	1904	!-- be opened (cf. check_open)
	1905	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1906	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1907	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1908	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1909	ENDIF
	1910	IF ( normalizing_region > statistic_regions .OR. &
	1911	normalizing_region < 0) THEN
[215]	1912	WRITE ( message_string, * ) 'normalizing_region = ', &
	1913	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1914	' (value of statistic_regions)'
[226]	1915	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1916	ENDIF
	1917
	1918	!
[116]	1919	!-- Check the interval for sorting particles.
	1920	!-- Using particles as cloud droplets requires sorting after each timestep.
	1921	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1922	dt_sort_particles = 0.0
[215]	1923	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1924	'_droplets = .TRUE.'
[226]	1925	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1926	ENDIF
	1927
	1928	!
[1]	1929	!-- Set the default intervals for data output, if necessary
	1930	!-- NOTE: dt_dosp has already been set in package_parin
	1931	IF ( dt_data_output /= 9999999.9 ) THEN
	1932	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1933	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1934	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1935	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1936	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1937	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1938	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1939	DO mid = 1, max_masks
[410]	1940	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1941	ENDDO
[1]	1942	ENDIF
	1943
	1944	!
	1945	!-- Set the default skip time intervals for data output, if necessary
	1946	IF ( skip_time_dopr == 9999999.9 ) &
	1947	skip_time_dopr = skip_time_data_output
	1948	IF ( skip_time_dosp == 9999999.9 ) &
	1949	skip_time_dosp = skip_time_data_output
	1950	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1951	skip_time_do2d_xy = skip_time_data_output
	1952	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1953	skip_time_do2d_xz = skip_time_data_output
	1954	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1955	skip_time_do2d_yz = skip_time_data_output
	1956	IF ( skip_time_do3d == 9999999.9 ) &
	1957	skip_time_do3d = skip_time_data_output
	1958	IF ( skip_time_data_output_av == 9999999.9 ) &
	1959	skip_time_data_output_av = skip_time_data_output
[564]	1960	DO mid = 1, max_masks
[410]	1961	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1962	skip_time_domask(mid) = skip_time_data_output
	1963	ENDDO
[1]	1964
	1965	!
	1966	!-- Check the average intervals (first for 3d-data, then for profiles and
	1967	!-- spectra)
	1968	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1969	WRITE( message_string, * ) 'averaging_interval = ', &
	1970	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1971	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1972	ENDIF
	1973
	1974	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1975	averaging_interval_pr = averaging_interval
	1976	ENDIF
	1977
	1978	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1979	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1980	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1981	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1982	ENDIF
	1983
	1984	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1985	averaging_interval_sp = averaging_interval
	1986	ENDIF
	1987
	1988	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1989	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1990	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1991	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1992	ENDIF
	1993
	1994	!
	1995	!-- Set the default interval for profiles entering the temporal average
	1996	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1997	dt_averaging_input_pr = dt_averaging_input
	1998	ENDIF
	1999
	2000	!
	2001	!-- Set the default interval for the output of timeseries to a reasonable
	2002	!-- value (tries to minimize the number of calls of flow_statistics)
	2003	IF ( dt_dots == 9999999.9 ) THEN
	2004	IF ( averaging_interval_pr == 0.0 ) THEN
	2005	dt_dots = MIN( dt_run_control, dt_dopr )
	2006	ELSE
	2007	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	2008	ENDIF
	2009	ENDIF
	2010
	2011	!
	2012	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	2013	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	2014	WRITE( message_string, * ) 'dt_averaging_input = ', &
	2015	dt_averaging_input, ' must be <= averaging_interval = ', &
	2016	averaging_interval
[226]	2017	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	2018	ENDIF
	2019
	2020	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	2021	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	2022	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	2023	averaging_interval_pr
[226]	2024	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	2025	ENDIF
	2026
	2027	!
[72]	2028	!-- Set the default value for the integration interval of precipitation amount
	2029	IF ( precipitation ) THEN
	2030	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	2031	precipitation_amount_interval = dt_do2d_xy
	2032	ELSE
	2033	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	2034	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	2035	precipitation_amount_interval, ' must not be larger than ', &
	2036	'dt_do2d_xy = ', dt_do2d_xy
[226]	2037	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	2038	ENDIF
	2039	ENDIF
	2040	ENDIF
	2041
	2042	!
[1]	2043	!-- Determine the number of output profiles and check whether they are
	2044	!-- permissible
	2045	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	2046
	2047	dopr_n = dopr_n + 1
	2048	i = dopr_n
	2049
	2050	!
	2051	!-- Determine internal profile number (for hom, homs)
	2052	!-- and store height levels
	2053	SELECT CASE ( TRIM( data_output_pr(i) ) )
	2054
	2055	CASE ( 'u', '#u' )
	2056	dopr_index(i) = 1
[87]	2057	dopr_unit(i) = 'm/s'
[1]	2058	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	2059	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2060	dopr_initial_index(i) = 5
	2061	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	2062	data_output_pr(i) = data_output_pr(i)(2:)
	2063	ENDIF
	2064
	2065	CASE ( 'v', '#v' )
	2066	dopr_index(i) = 2
[87]	2067	dopr_unit(i) = 'm/s'
	2068	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2069	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2070	dopr_initial_index(i) = 6
	2071	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	2072	data_output_pr(i) = data_output_pr(i)(2:)
	2073	ENDIF
	2074
	2075	CASE ( 'w' )
	2076	dopr_index(i) = 3
[87]	2077	dopr_unit(i) = 'm/s'
	2078	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2079
	2080	CASE ( 'pt', '#pt' )
	2081	IF ( .NOT. cloud_physics ) THEN
	2082	dopr_index(i) = 4
[87]	2083	dopr_unit(i) = 'K'
[1]	2084	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2085	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2086	dopr_initial_index(i) = 7
	2087	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2088	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	2089	data_output_pr(i) = data_output_pr(i)(2:)
	2090	ENDIF
	2091	ELSE
	2092	dopr_index(i) = 43
[87]	2093	dopr_unit(i) = 'K'
[1]	2094	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	2095	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2096	dopr_initial_index(i) = 28
	2097	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2098	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	2099	data_output_pr(i) = data_output_pr(i)(2:)
	2100	ENDIF
	2101	ENDIF
	2102
	2103	CASE ( 'e' )
	2104	dopr_index(i) = 8
[87]	2105	dopr_unit(i) = 'm2/s2'
[1]	2106	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	2107	hom(nzb,2,8,:) = 0.0
	2108
	2109	CASE ( 'km', '#km' )
	2110	dopr_index(i) = 9
[87]	2111	dopr_unit(i) = 'm2/s'
[1]	2112	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2113	hom(nzb,2,9,:) = 0.0
	2114	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2115	dopr_initial_index(i) = 23
	2116	hom(:,2,23,:) = hom(:,2,9,:)
	2117	data_output_pr(i) = data_output_pr(i)(2:)
	2118	ENDIF
	2119
	2120	CASE ( 'kh', '#kh' )
	2121	dopr_index(i) = 10
[87]	2122	dopr_unit(i) = 'm2/s'
[1]	2123	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2124	hom(nzb,2,10,:) = 0.0
	2125	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2126	dopr_initial_index(i) = 24
	2127	hom(:,2,24,:) = hom(:,2,10,:)
	2128	data_output_pr(i) = data_output_pr(i)(2:)
	2129	ENDIF
	2130
	2131	CASE ( 'l', '#l' )
	2132	dopr_index(i) = 11
[87]	2133	dopr_unit(i) = 'm'
[1]	2134	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2135	hom(nzb,2,11,:) = 0.0
	2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2137	dopr_initial_index(i) = 25
	2138	hom(:,2,25,:) = hom(:,2,11,:)
	2139	data_output_pr(i) = data_output_pr(i)(2:)
	2140	ENDIF
	2141
	2142	CASE ( 'w"u"' )
	2143	dopr_index(i) = 12
[87]	2144	dopr_unit(i) = 'm2/s2'
[1]	2145	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2146	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2147
	2148	CASE ( 'wu' )
	2149	dopr_index(i) = 13
[87]	2150	dopr_unit(i) = 'm2/s2'
[1]	2151	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2152
	2153	CASE ( 'w"v"' )
	2154	dopr_index(i) = 14
[87]	2155	dopr_unit(i) = 'm2/s2'
[1]	2156	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2157	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2158
	2159	CASE ( 'wv' )
	2160	dopr_index(i) = 15
[87]	2161	dopr_unit(i) = 'm2/s2'
[1]	2162	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2163
	2164	CASE ( 'w"pt"' )
	2165	dopr_index(i) = 16
[87]	2166	dopr_unit(i) = 'K m/s'
[1]	2167	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2168
	2169	CASE ( 'wpt' )
	2170	dopr_index(i) = 17
[87]	2171	dopr_unit(i) = 'K m/s'
[1]	2172	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2173
	2174	CASE ( 'wpt' )
	2175	dopr_index(i) = 18
[87]	2176	dopr_unit(i) = 'K m/s'
[1]	2177	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2178
	2179	CASE ( 'wu' )
	2180	dopr_index(i) = 19
[87]	2181	dopr_unit(i) = 'm2/s2'
[1]	2182	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2183	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2184
	2185	CASE ( 'wv' )
	2186	dopr_index(i) = 20
[87]	2187	dopr_unit(i) = 'm2/s2'
[1]	2188	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2189	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2190
	2191	CASE ( 'wptBC' )
	2192	dopr_index(i) = 21
[87]	2193	dopr_unit(i) = 'K m/s'
[1]	2194	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2195
	2196	CASE ( 'wptBC' )
	2197	dopr_index(i) = 22
[87]	2198	dopr_unit(i) = 'K m/s'
[1]	2199	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2200
[96]	2201	CASE ( 'sa', '#sa' )
	2202	IF ( .NOT. ocean ) THEN
[215]	2203	message_string = 'data_output_pr = ' // &
	2204	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2205	'lemented for ocean = .FALSE.'
[226]	2206	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2207	ELSE
	2208	dopr_index(i) = 23
	2209	dopr_unit(i) = 'psu'
	2210	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2211	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2212	dopr_initial_index(i) = 26
	2213	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2214	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2215	data_output_pr(i) = data_output_pr(i)(2:)
	2216	ENDIF
	2217	ENDIF
	2218
[1]	2219	CASE ( 'u*2' )
	2220	dopr_index(i) = 30
[87]	2221	dopr_unit(i) = 'm2/s2'
[1]	2222	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2223
	2224	CASE ( 'v*2' )
	2225	dopr_index(i) = 31
[87]	2226	dopr_unit(i) = 'm2/s2'
[1]	2227	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2228
	2229	CASE ( 'w*2' )
	2230	dopr_index(i) = 32
[87]	2231	dopr_unit(i) = 'm2/s2'
[1]	2232	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2233
	2234	CASE ( 'pt*2' )
	2235	dopr_index(i) = 33
[87]	2236	dopr_unit(i) = 'K2'
[1]	2237	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2238
	2239	CASE ( 'e*' )
	2240	dopr_index(i) = 34
[87]	2241	dopr_unit(i) = 'm2/s2'
[1]	2242	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2243
	2244	CASE ( 'w2pt' )
	2245	dopr_index(i) = 35
[87]	2246	dopr_unit(i) = 'K m2/s2'
[1]	2247	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2248
	2249	CASE ( 'wpt2' )
	2250	dopr_index(i) = 36
[87]	2251	dopr_unit(i) = 'K2 m/s'
[1]	2252	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2253
	2254	CASE ( 'we' )
	2255	dopr_index(i) = 37
[87]	2256	dopr_unit(i) = 'm3/s3'
[1]	2257	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2258
	2259	CASE ( 'w*3' )
	2260	dopr_index(i) = 38
[87]	2261	dopr_unit(i) = 'm3/s3'
[1]	2262	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2263
	2264	CASE ( 'Sw' )
	2265	dopr_index(i) = 39
[89]	2266	dopr_unit(i) = 'none'
[1]	2267	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2268
[232]	2269	CASE ( 'p' )
	2270	dopr_index(i) = 40
	2271	dopr_unit(i) = 'Pa'
	2272	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2273
[1]	2274	CASE ( 'q', '#q' )
[108]	2275	IF ( .NOT. humidity ) THEN
[215]	2276	message_string = 'data_output_pr = ' // &
	2277	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2278	'lemented for humidity = .FALSE.'
[226]	2279	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2280	ELSE
	2281	dopr_index(i) = 41
[87]	2282	dopr_unit(i) = 'kg/kg'
	2283	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2284	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2285	dopr_initial_index(i) = 26
	2286	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2287	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2288	data_output_pr(i) = data_output_pr(i)(2:)
	2289	ENDIF
	2290	ENDIF
	2291
	2292	CASE ( 's', '#s' )
	2293	IF ( .NOT. passive_scalar ) THEN
[215]	2294	message_string = 'data_output_pr = ' // &
	2295	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2296	'lemented for passive_scalar = .FALSE.'
[226]	2297	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2298	ELSE
	2299	dopr_index(i) = 41
[87]	2300	dopr_unit(i) = 'kg/m3'
	2301	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2302	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2303	dopr_initial_index(i) = 26
	2304	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2305	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2306	data_output_pr(i) = data_output_pr(i)(2:)
	2307	ENDIF
	2308	ENDIF
	2309
	2310	CASE ( 'qv', '#qv' )
	2311	IF ( .NOT. cloud_physics ) THEN
	2312	dopr_index(i) = 41
[87]	2313	dopr_unit(i) = 'kg/kg'
	2314	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2315	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2316	dopr_initial_index(i) = 26
	2317	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2318	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2319	data_output_pr(i) = data_output_pr(i)(2:)
	2320	ENDIF
	2321	ELSE
	2322	dopr_index(i) = 42
[87]	2323	dopr_unit(i) = 'kg/kg'
	2324	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2325	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2326	dopr_initial_index(i) = 27
	2327	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2328	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2329	data_output_pr(i) = data_output_pr(i)(2:)
	2330	ENDIF
	2331	ENDIF
	2332
	2333	CASE ( 'lpt', '#lpt' )
	2334	IF ( .NOT. cloud_physics ) THEN
[215]	2335	message_string = 'data_output_pr = ' // &
	2336	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2337	'lemented for cloud_physics = .FALSE.'
[226]	2338	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2339	ELSE
	2340	dopr_index(i) = 4
[87]	2341	dopr_unit(i) = 'K'
[1]	2342	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2343	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2344	dopr_initial_index(i) = 7
	2345	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2346	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2347	data_output_pr(i) = data_output_pr(i)(2:)
	2348	ENDIF
	2349	ENDIF
	2350
	2351	CASE ( 'vpt', '#vpt' )
	2352	dopr_index(i) = 44
[87]	2353	dopr_unit(i) = 'K'
	2354	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2355	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2356	dopr_initial_index(i) = 29
	2357	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2358	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2359	data_output_pr(i) = data_output_pr(i)(2:)
	2360	ENDIF
	2361
	2362	CASE ( 'w"vpt"' )
	2363	dopr_index(i) = 45
[87]	2364	dopr_unit(i) = 'K m/s'
[1]	2365	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2366
	2367	CASE ( 'wvpt' )
	2368	dopr_index(i) = 46
[87]	2369	dopr_unit(i) = 'K m/s'
[1]	2370	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2371
	2372	CASE ( 'wvpt' )
	2373	dopr_index(i) = 47
[87]	2374	dopr_unit(i) = 'K m/s'
[1]	2375	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2376
	2377	CASE ( 'w"q"' )
[108]	2378	IF ( .NOT. humidity ) THEN
[215]	2379	message_string = 'data_output_pr = ' // &
	2380	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2381	'lemented for humidity = .FALSE.'
[226]	2382	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2383	ELSE
	2384	dopr_index(i) = 48
[87]	2385	dopr_unit(i) = 'kg/kg m/s'
[1]	2386	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2387	ENDIF
	2388
	2389	CASE ( 'wq' )
[108]	2390	IF ( .NOT. humidity ) THEN
[215]	2391	message_string = 'data_output_pr = ' // &
	2392	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2393	'lemented for humidity = .FALSE.'
[226]	2394	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2395	ELSE
	2396	dopr_index(i) = 49
[87]	2397	dopr_unit(i) = 'kg/kg m/s'
[1]	2398	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2399	ENDIF
	2400
	2401	CASE ( 'wq' )
[108]	2402	IF ( .NOT. humidity ) THEN
[215]	2403	message_string = 'data_output_pr = ' // &
	2404	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2405	'lemented for humidity = .FALSE.'
[226]	2406	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2407	ELSE
	2408	dopr_index(i) = 50
[87]	2409	dopr_unit(i) = 'kg/kg m/s'
[1]	2410	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2411	ENDIF
	2412
	2413	CASE ( 'w"s"' )
	2414	IF ( .NOT. passive_scalar ) THEN
[215]	2415	message_string = 'data_output_pr = ' // &
	2416	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2417	'lemented for passive_scalar = .FALSE.'
[226]	2418	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2419	ELSE
	2420	dopr_index(i) = 48
[87]	2421	dopr_unit(i) = 'kg/m3 m/s'
[1]	2422	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2423	ENDIF
	2424
	2425	CASE ( 'ws' )
	2426	IF ( .NOT. passive_scalar ) THEN
[215]	2427	message_string = 'data_output_pr = ' // &
	2428	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2429	'lemented for passive_scalar = .FALSE.'
[226]	2430	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2431	ELSE
	2432	dopr_index(i) = 49
[87]	2433	dopr_unit(i) = 'kg/m3 m/s'
[1]	2434	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2435	ENDIF
	2436
	2437	CASE ( 'ws' )
	2438	IF ( .NOT. passive_scalar ) THEN
[215]	2439	message_string = 'data_output_pr = ' // &
	2440	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2441	'lemented for passive_scalar = .FALSE.'
[226]	2442	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2443	ELSE
	2444	dopr_index(i) = 50
[87]	2445	dopr_unit(i) = 'kg/m3 m/s'
[1]	2446	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2447	ENDIF
	2448
	2449	CASE ( 'w"qv"' )
[75]	2450	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2451	THEN
	2452	dopr_index(i) = 48
[87]	2453	dopr_unit(i) = 'kg/kg m/s'
[1]	2454	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2455	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2456	dopr_index(i) = 51
[87]	2457	dopr_unit(i) = 'kg/kg m/s'
[1]	2458	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2459	ELSE
[215]	2460	message_string = 'data_output_pr = ' // &
	2461	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2462	'lemented for cloud_physics = .FALSE. an&' // &
	2463	'd humidity = .FALSE.'
[226]	2464	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2465	ENDIF
	2466
	2467	CASE ( 'wqv' )
[75]	2468	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2469	THEN
	2470	dopr_index(i) = 49
[87]	2471	dopr_unit(i) = 'kg/kg m/s'
[1]	2472	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2473	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2474	dopr_index(i) = 52
[87]	2475	dopr_unit(i) = 'kg/kg m/s'
[1]	2476	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2477	ELSE
[215]	2478	message_string = 'data_output_pr = ' // &
	2479	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2480	'lemented for cloud_physics = .FALSE. an&' // &
	2481	'd humidity = .FALSE.'
[226]	2482	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2483	ENDIF
	2484
	2485	CASE ( 'wqv' )
[75]	2486	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2487	THEN
	2488	dopr_index(i) = 50
[87]	2489	dopr_unit(i) = 'kg/kg m/s'
[1]	2490	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2491	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2492	dopr_index(i) = 53
[87]	2493	dopr_unit(i) = 'kg/kg m/s'
[1]	2494	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2495	ELSE
[215]	2496	message_string = 'data_output_pr = ' // &
	2497	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2498	'lemented for cloud_physics = .FALSE. an&' // &
	2499	'd humidity = .FALSE.'
[226]	2500	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2501	ENDIF
	2502
	2503	CASE ( 'ql' )
	2504	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2505	message_string = 'data_output_pr = ' // &
	2506	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2507	'lemented for cloud_physics = .FALSE. or' // &
	2508	'&cloud_droplets = .FALSE.'
[226]	2509	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2510	ELSE
	2511	dopr_index(i) = 54
[87]	2512	dopr_unit(i) = 'kg/kg'
[1]	2513	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2514	ENDIF
	2515
[524]	2516	CASE ( 'wuu*:dz' )
[1]	2517	dopr_index(i) = 55
[87]	2518	dopr_unit(i) = 'm2/s3'
[1]	2519	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2520
[524]	2521	CASE ( 'wp:dz' )
[1]	2522	dopr_index(i) = 56
[87]	2523	dopr_unit(i) = 'm2/s3'
[106]	2524	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2525
[524]	2526	CASE ( 'w"e:dz' )
[1]	2527	dopr_index(i) = 57
[87]	2528	dopr_unit(i) = 'm2/s3'
[1]	2529	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2530
[667]	2531
[1]	2532	CASE ( 'u"pt"' )
	2533	dopr_index(i) = 58
[87]	2534	dopr_unit(i) = 'K m/s'
[1]	2535	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2536
	2537	CASE ( 'upt' )
	2538	dopr_index(i) = 59
[87]	2539	dopr_unit(i) = 'K m/s'
[1]	2540	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2541
	2542	CASE ( 'upt_t' )
	2543	dopr_index(i) = 60
[87]	2544	dopr_unit(i) = 'K m/s'
[1]	2545	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2546
	2547	CASE ( 'v"pt"' )
	2548	dopr_index(i) = 61
[87]	2549	dopr_unit(i) = 'K m/s'
[1]	2550	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2551
	2552	CASE ( 'vpt' )
	2553	dopr_index(i) = 62
[87]	2554	dopr_unit(i) = 'K m/s'
[1]	2555	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2556
	2557	CASE ( 'vpt_t' )
	2558	dopr_index(i) = 63
[87]	2559	dopr_unit(i) = 'K m/s'
[1]	2560	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2561
[96]	2562	CASE ( 'rho' )
[388]	2563	IF ( .NOT. ocean ) THEN
	2564	message_string = 'data_output_pr = ' // &
	2565	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2566	'lemented for ocean = .FALSE.'
	2567	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2568	ELSE
	2569	dopr_index(i) = 64
	2570	dopr_unit(i) = 'kg/m3'
	2571	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1179]	2572	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2573	dopr_initial_index(i) = 77
	2574	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
	2575	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
	2576	data_output_pr(i) = data_output_pr(i)(2:)
	2577	ENDIF
[388]	2578	ENDIF
[1]	2579
[96]	2580	CASE ( 'w"sa"' )
	2581	IF ( .NOT. ocean ) THEN
[215]	2582	message_string = 'data_output_pr = ' // &
	2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2584	'lemented for ocean = .FALSE.'
[226]	2585	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2586	ELSE
	2587	dopr_index(i) = 65
	2588	dopr_unit(i) = 'psu m/s'
	2589	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2590	ENDIF
	2591
	2592	CASE ( 'wsa' )
	2593	IF ( .NOT. ocean ) THEN
[215]	2594	message_string = 'data_output_pr = ' // &
	2595	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2596	'lemented for ocean = .FALSE.'
[226]	2597	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2598	ELSE
	2599	dopr_index(i) = 66
	2600	dopr_unit(i) = 'psu m/s'
	2601	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2602	ENDIF
	2603
	2604	CASE ( 'wsa' )
	2605	IF ( .NOT. ocean ) THEN
[215]	2606	message_string = 'data_output_pr = ' // &
	2607	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2608	'lemented for ocean = .FALSE.'
[226]	2609	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2610	ELSE
	2611	dopr_index(i) = 67
	2612	dopr_unit(i) = 'psu m/s'
	2613	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2614	ENDIF
	2615
[106]	2616	CASE ( 'wp' )
	2617	dopr_index(i) = 68
	2618	dopr_unit(i) = 'm3/s3'
	2619	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2620
[106]	2621	CASE ( 'w"e' )
	2622	dopr_index(i) = 69
	2623	dopr_unit(i) = 'm3/s3'
	2624	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2625
[197]	2626	CASE ( 'q*2' )
	2627	IF ( .NOT. humidity ) THEN
[215]	2628	message_string = 'data_output_pr = ' // &
	2629	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2630	'lemented for humidity = .FALSE.'
[226]	2631	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2632	ELSE
	2633	dopr_index(i) = 70
	2634	dopr_unit(i) = 'kg2/kg2'
	2635	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2636	ENDIF
[106]	2637
[388]	2638	CASE ( 'prho' )
	2639	IF ( .NOT. ocean ) THEN
	2640	message_string = 'data_output_pr = ' // &
	2641	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2642	'lemented for ocean = .FALSE.'
	2643	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2644	ELSE
	2645	dopr_index(i) = 71
	2646	dopr_unit(i) = 'kg/m3'
	2647	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2648	ENDIF
	2649
	2650	CASE ( 'hyp' )
	2651	dopr_index(i) = 72
[531]	2652	dopr_unit(i) = 'dbar'
[388]	2653	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2654
[1053]	2655	CASE ( 'nr' )
	2656	IF ( .NOT. cloud_physics ) THEN
	2657	message_string = 'data_output_pr = ' // &
	2658	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2659	'lemented for cloud_physics = .FALSE.'
	2660	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2661	ELSEIF ( icloud_scheme /= 0 ) THEN
	2662	message_string = 'data_output_pr = ' // &
	2663	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2664	'lemented for cloud_scheme /= seifert_beheng'
	2665	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2666	ELSEIF ( .NOT. precipitation ) THEN
	2667	message_string = 'data_output_pr = ' // &
	2668	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2669	'lemented for precipitation = .FALSE.'
	2670	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2671	ELSE
	2672	dopr_index(i) = 73
	2673	dopr_unit(i) = '1/m3'
	2674	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2675	ENDIF
	2676
	2677	CASE ( 'qr' )
	2678	IF ( .NOT. cloud_physics ) THEN
	2679	message_string = 'data_output_pr = ' // &
	2680	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2681	'lemented for cloud_physics = .FALSE.'
	2682	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2683	ELSEIF ( icloud_scheme /= 0 ) THEN
	2684	message_string = 'data_output_pr = ' // &
	2685	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2686	'lemented for cloud_scheme /= seifert_beheng'
	2687	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2688	ELSEIF ( .NOT. precipitation ) THEN
	2689	message_string = 'data_output_pr = ' // &
	2690	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2691	'lemented for precipitation = .FALSE.'
	2692	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2693	ELSE
	2694	dopr_index(i) = 74
	2695	dopr_unit(i) = 'kg/kg'
	2696	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2697	ENDIF
	2698
	2699	CASE ( 'qc' )
	2700	IF ( .NOT. cloud_physics ) THEN
	2701	message_string = 'data_output_pr = ' // &
	2702	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2703	'lemented for cloud_physics = .FALSE.'
	2704	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2705	ELSEIF ( icloud_scheme /= 0 ) THEN
	2706	message_string = 'data_output_pr = ' // &
	2707	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2708	'lemented for cloud_scheme /= seifert_beheng'
	2709	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2710	ELSE
	2711	dopr_index(i) = 75
	2712	dopr_unit(i) = 'kg/kg'
	2713	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2714	ENDIF
	2715
	2716	CASE ( 'prr' )
	2717	IF ( .NOT. cloud_physics ) THEN
	2718	message_string = 'data_output_pr = ' // &
	2719	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2720	'lemented for cloud_physics = .FALSE.'
	2721	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2722	ELSEIF ( icloud_scheme /= 0 ) THEN
	2723	message_string = 'data_output_pr = ' // &
	2724	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2725	'lemented for cloud_scheme /= seifert_beheng'
	2726	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2727	ELSEIF ( .NOT. precipitation ) THEN
	2728	message_string = 'data_output_pr = ' // &
	2729	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2730	'lemented for precipitation = .FALSE.'
	2731	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2732
	2733	ELSE
	2734	dopr_index(i) = 76
	2735	dopr_unit(i) = 'kg/kg m/s'
	2736	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2737	ENDIF
	2738
[1241]	2739	CASE ( 'ug' )
	2740	dopr_index(i) = 78
	2741	dopr_unit(i) = 'm/s'
	2742	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
	2743
	2744	CASE ( 'vg' )
	2745	dopr_index(i) = 79
	2746	dopr_unit(i) = 'm/s'
	2747	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
	2748
[1299]	2749	CASE ( 'w_subs' )
	2750	IF ( .NOT. large_scale_subsidence ) THEN
	2751	message_string = 'data_output_pr = ' // &
	2752	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2753	'lemented for large_scale_subsidence = .FALSE.'
	2754	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
	2755	ELSE
	2756	dopr_index(i) = 80
	2757	dopr_unit(i) = 'm/s'
	2758	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
	2759	ENDIF
	2760
[1]	2761	CASE DEFAULT
[87]	2762
	2763	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2764
	2765	IF ( unit == 'illegal' ) THEN
[215]	2766	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2767	message_string = 'illegal value for data_output_pr or ' // &
	2768	'data_output_pr_user = "' // &
	2769	TRIM( data_output_pr(i) ) // '"'
[226]	2770	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2771	ELSE
	2772	message_string = 'illegal value for data_output_pr = "' // &
	2773	TRIM( data_output_pr(i) ) // '"'
[226]	2774	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2775	ENDIF
[1]	2776	ENDIF
	2777
	2778	END SELECT
[667]	2779
[1]	2780	ENDDO
	2781
	2782
	2783	!
	2784	!-- Append user-defined data output variables to the standard data output
	2785	IF ( data_output_user(1) /= ' ' ) THEN
	2786	i = 1
	2787	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2788	i = i + 1
	2789	ENDDO
	2790	j = 1
	2791	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2792	IF ( i > 100 ) THEN
[215]	2793	message_string = 'number of output quantitities given by data' // &
	2794	'_output and data_output_user exceeds the limit of 100'
[226]	2795	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2796	ENDIF
	2797	data_output(i) = data_output_user(j)
	2798	i = i + 1
	2799	j = j + 1
	2800	ENDDO
	2801	ENDIF
	2802
	2803	!
	2804	!-- Check and set steering parameters for 2d/3d data output and averaging
	2805	i = 1
	2806	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2807	!
	2808	!-- Check for data averaging
	2809	ilen = LEN_TRIM( data_output(i) )
	2810	j = 0 ! no data averaging
	2811	IF ( ilen > 3 ) THEN
	2812	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2813	j = 1 ! data averaging
	2814	data_output(i) = data_output(i)(1:ilen-3)
	2815	ENDIF
	2816	ENDIF
	2817	!
	2818	!-- Check for cross section or volume data
	2819	ilen = LEN_TRIM( data_output(i) )
	2820	k = 0 ! 3d data
	2821	var = data_output(i)(1:ilen)
	2822	IF ( ilen > 3 ) THEN
	2823	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2824	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2825	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2826	k = 1 ! 2d data
	2827	var = data_output(i)(1:ilen-3)
	2828	ENDIF
	2829	ENDIF
	2830	!
	2831	!-- Check for allowed value and set units
	2832	SELECT CASE ( TRIM( var ) )
	2833
	2834	CASE ( 'e' )
	2835	IF ( constant_diffusion ) THEN
[215]	2836	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2837	'res constant_diffusion = .FALSE.'
[226]	2838	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2839	ENDIF
	2840	unit = 'm2/s2'
	2841
[771]	2842	CASE ( 'lpt' )
	2843	IF ( .NOT. cloud_physics ) THEN
	2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2845	'res cloud_physics = .TRUE.'
	2846	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2847	ENDIF
	2848	unit = 'K'
	2849
[1053]	2850	CASE ( 'nr' )
	2851	IF ( .NOT. cloud_physics ) THEN
	2852	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2853	'res cloud_physics = .TRUE.'
	2854	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2855	ELSEIF ( icloud_scheme /= 0 ) THEN
	2856	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2857	'res cloud_scheme = seifert_beheng'
	2858	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2859	ENDIF
	2860	unit = '1/m3'
	2861
[1]	2862	CASE ( 'pc', 'pr' )
	2863	IF ( .NOT. particle_advection ) THEN
[215]	2864	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2865	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2866	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2867	ENDIF
	2868	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2869	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2870
[1053]	2871	CASE ( 'prr' )
	2872	IF ( .NOT. cloud_physics ) THEN
	2873	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2874	'res cloud_physics = .TRUE.'
	2875	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2876	ELSEIF ( icloud_scheme /= 0 ) THEN
	2877	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2878	'res cloud_scheme = seifert_beheng'
	2879	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2880	ELSEIF ( .NOT. precipitation ) THEN
	2881	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2882	'res precipitation = .TRUE.'
	2883	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2884	ENDIF
	2885	unit = 'kg/kg m/s'
	2886
[1]	2887	CASE ( 'q', 'vpt' )
[75]	2888	IF ( .NOT. humidity ) THEN
[215]	2889	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2890	'res humidity = .TRUE.'
[226]	2891	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2892	ENDIF
	2893	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2894	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2895
[1053]	2896	CASE ( 'qc' )
	2897	IF ( .NOT. cloud_physics ) THEN
	2898	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2899	'res cloud_physics = .TRUE.'
	2900	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2901	ELSEIF ( icloud_scheme /= 0 ) THEN
	2902	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2903	'res cloud_scheme = seifert_beheng'
	2904	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2905	ENDIF
	2906	unit = 'kg/kg'
	2907
[1]	2908	CASE ( 'ql' )
	2909	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2910	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2911	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2912	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2913	ENDIF
	2914	unit = 'kg/kg'
	2915
	2916	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2917	IF ( .NOT. cloud_droplets ) THEN
[215]	2918	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2919	'res cloud_droplets = .TRUE.'
[226]	2920	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2921	ENDIF
	2922	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2923	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2924	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2925
[1053]	2926	CASE ( 'qr' )
	2927	IF ( .NOT. cloud_physics ) THEN
	2928	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2929	'res cloud_physics = .TRUE.'
	2930	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2931	ELSEIF ( icloud_scheme /= 0 ) THEN
	2932	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2933	'res cloud_scheme = seifert_beheng'
	2934	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
[1115]	2935	ELSEIF ( .NOT. precipitation ) THEN
	2936	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2937	'res precipitation = .TRUE.'
	2938	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[1053]	2939	ENDIF
	2940	unit = 'kg/kg'
	2941
[1]	2942	CASE ( 'qv' )
	2943	IF ( .NOT. cloud_physics ) THEN
[215]	2944	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2945	'res cloud_physics = .TRUE.'
[226]	2946	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2947	ENDIF
	2948	unit = 'kg/kg'
	2949
[96]	2950	CASE ( 'rho' )
	2951	IF ( .NOT. ocean ) THEN
[215]	2952	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2953	'res ocean = .TRUE.'
[226]	2954	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2955	ENDIF
	2956	unit = 'kg/m3'
	2957
[1]	2958	CASE ( 's' )
	2959	IF ( .NOT. passive_scalar ) THEN
[215]	2960	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2961	'res passive_scalar = .TRUE.'
[226]	2962	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2963	ENDIF
	2964	unit = 'conc'
	2965
[96]	2966	CASE ( 'sa' )
	2967	IF ( .NOT. ocean ) THEN
[215]	2968	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2969	'res ocean = .TRUE.'
[226]	2970	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2971	ENDIF
	2972	unit = 'psu'
	2973
[978]	2974	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2975	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2976	message_string = 'illegal value for data_output: "' // &
	2977	TRIM( var ) // '" & only 2d-horizontal ' // &
	2978	'cross sections are allowed for this value'
[226]	2979	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2980	ENDIF
	2981	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2982	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2983	'res cloud_physics = .TRUE.'
[226]	2984	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2985	ENDIF
[72]	2986	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2987	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2988	'res precipitation = .TRUE.'
[226]	2989	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2990	ENDIF
	2991	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2992	message_string = 'temporal averaging of precipitation ' // &
	2993	'amount "' // TRIM( var ) // '" is not possible'
[226]	2994	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2995	ENDIF
	2996	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2997	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2998	'res precipitation = .TRUE.'
[226]	2999	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	3000	ENDIF
[354]	3001	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	3002	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	3003	'res humidity = .TRUE.'
	3004	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	3005	ENDIF
[72]	3006
[354]	3007	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	3008	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	3009	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	3010	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	3011	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	3012	IF ( TRIM( var ) == 't*' ) unit = 'K'
	3013	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	3014	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	3015	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	3016
[1]	3017
	3018	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	3019	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	3020	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	3021	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	3022	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	3023	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	3024	CONTINUE
	3025
	3026	CASE DEFAULT
	3027	CALL user_check_data_output( var, unit )
	3028
	3029	IF ( unit == 'illegal' ) THEN
[215]	3030	IF ( data_output_user(1) /= ' ' ) THEN
	3031	message_string = 'illegal value for data_output or ' // &
	3032	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	3033	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	3034	ELSE
	3035	message_string = 'illegal value for data_output =' // &
	3036	TRIM( data_output(i) ) // '"'
[226]	3037	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	3038	ENDIF
	3039	ENDIF
	3040
	3041	END SELECT
	3042	!
	3043	!-- Set the internal steering parameters appropriately
	3044	IF ( k == 0 ) THEN
	3045	do3d_no(j) = do3d_no(j) + 1
	3046	do3d(j,do3d_no(j)) = data_output(i)
	3047	do3d_unit(j,do3d_no(j)) = unit
	3048	ELSE
	3049	do2d_no(j) = do2d_no(j) + 1
	3050	do2d(j,do2d_no(j)) = data_output(i)
	3051	do2d_unit(j,do2d_no(j)) = unit
	3052	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	3053	data_output_xy(j) = .TRUE.
	3054	ENDIF
	3055	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	3056	data_output_xz(j) = .TRUE.
	3057	ENDIF
	3058	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	3059	data_output_yz(j) = .TRUE.
	3060	ENDIF
	3061	ENDIF
	3062
	3063	IF ( j == 1 ) THEN
	3064	!
	3065	!-- Check, if variable is already subject to averaging
	3066	found = .FALSE.
	3067	DO k = 1, doav_n
	3068	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	3069	ENDDO
	3070
	3071	IF ( .NOT. found ) THEN
	3072	doav_n = doav_n + 1
	3073	doav(doav_n) = var
	3074	ENDIF
	3075	ENDIF
	3076
	3077	i = i + 1
	3078	ENDDO
	3079
	3080	!
[376]	3081	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	3082	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	3083	WRITE( message_string, * ) 'output of averaged quantity "', &
	3084	TRIM( doav(1) ), '_av" requires to set a ', &
	3085	'non-zero & averaging interval'
	3086	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	3087	ENDIF
	3088
	3089	!
[308]	3090	!-- Check sectional planes and store them in one shared array
	3091	IF ( ANY( section_xy > nz + 1 ) ) THEN
	3092	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	3093	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	3094	ENDIF
	3095	IF ( ANY( section_xz > ny + 1 ) ) THEN
	3096	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	3097	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	3098	ENDIF
	3099	IF ( ANY( section_yz > nx + 1 ) ) THEN
	3100	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	3101	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	3102	ENDIF
[1]	3103	section(:,1) = section_xy
	3104	section(:,2) = section_xz
	3105	section(:,3) = section_yz
	3106
	3107	!
	3108	!-- Upper plot limit for 2D vertical sections
	3109	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	3110	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	3111	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	3112	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	3113	' (zu(nzt))'
[226]	3114	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	3115	ENDIF
	3116
	3117	!
	3118	!-- Upper plot limit for 3D arrays
	3119	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	3120
	3121	!
	3122	!-- Determine and check accuracy for compressed 3D plot output
	3123	IF ( do3d_compress ) THEN
	3124	!
	3125	!-- Compression only permissible on T3E machines
	3126	IF ( host(1:3) /= 't3e' ) THEN
[215]	3127	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	3128	TRIM( host ) // '"'
[226]	3129	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	3130	ENDIF
	3131
	3132	i = 1
	3133	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	3134
	3135	ilen = LEN_TRIM( do3d_comp_prec(i) )
	3136	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	3137	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3138	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3139	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3140	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3141	ENDIF
	3142
	3143	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3144	var = do3d_comp_prec(i)(1:ilen-1)
	3145
	3146	SELECT CASE ( var )
	3147
	3148	CASE ( 'u' )
	3149	j = 1
	3150	CASE ( 'v' )
	3151	j = 2
	3152	CASE ( 'w' )
	3153	j = 3
	3154	CASE ( 'p' )
	3155	j = 4
	3156	CASE ( 'pt' )
	3157	j = 5
	3158
	3159	CASE DEFAULT
[215]	3160	WRITE( message_string, * ) 'unknown variable "', &
	3161	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3162	i, ')'
[226]	3163	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3164
	3165	END SELECT
	3166
	3167	plot_3d_precision(j)%precision = prec
	3168	i = i + 1
	3169
	3170	ENDDO
	3171	ENDIF
	3172
	3173	!
	3174	!-- Check the data output format(s)
	3175	IF ( data_output_format(1) == ' ' ) THEN
	3176	!
	3177	!-- Default value
	3178	netcdf_output = .TRUE.
	3179	ELSE
	3180	i = 1
	3181	DO WHILE ( data_output_format(i) /= ' ' )
	3182
	3183	SELECT CASE ( data_output_format(i) )
	3184
	3185	CASE ( 'netcdf' )
	3186	netcdf_output = .TRUE.
	3187	CASE ( 'iso2d' )
	3188	iso2d_output = .TRUE.
	3189	CASE ( 'avs' )
	3190	avs_output = .TRUE.
	3191
	3192	CASE DEFAULT
[215]	3193	message_string = 'unknown value for data_output_format "' // &
	3194	TRIM( data_output_format(i) ) // '"'
[226]	3195	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3196
	3197	END SELECT
	3198
	3199	i = i + 1
	3200	IF ( i > 10 ) EXIT
	3201
	3202	ENDDO
[1031]	3203	ENDIF
[1]	3204
[1031]	3205	!
	3206	!-- Set output format string (used in header)
	3207	IF ( netcdf_output ) THEN
	3208
	3209	SELECT CASE ( netcdf_data_format )
	3210	CASE ( 1 )
	3211	output_format_netcdf = 'netCDF classic'
	3212	CASE ( 2 )
	3213	output_format_netcdf = 'netCDF 64bit offset'
	3214	CASE ( 3 )
	3215	output_format_netcdf = 'netCDF4/HDF5'
	3216	CASE ( 4 )
	3217	output_format_netcdf = 'netCDF4/HDF5 classic'
	3218	CASE ( 5 )
	3219	output_format_netcdf = 'parallel netCDF4/HDF5'
	3220	CASE ( 6 )
	3221	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3222
	3223	END SELECT
	3224
[1]	3225	ENDIF
	3226
[1236]	3227	#if defined( __spectra )
[1]	3228	!
[1236]	3229	!-- Check the number of spectra level to be output
	3230	i = 1
	3231	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
	3232	i = i + 1
	3233	ENDDO
	3234	i = i - 1
	3235	IF ( i == 0 ) THEN
	3236	WRITE( message_string, * ) 'no spectra levels given'
	3237	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
	3238	ENDIF
	3239	#endif
	3240
	3241	!
[410]	3242	!-- Check mask conditions
[553]	3243	DO mid = 1, max_masks
[567]	3244	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3245	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3246	masks = masks + 1
	3247	ENDIF
	3248	ENDDO
	3249
[410]	3250	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3251	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3252	'<= ', max_masks, ' (=max_masks)'
[564]	3253	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3254	ENDIF
	3255	IF ( masks > 0 ) THEN
	3256	mask_scale(1) = mask_scale_x
	3257	mask_scale(2) = mask_scale_y
	3258	mask_scale(3) = mask_scale_z
	3259	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3260	WRITE( message_string, * ) &
	3261	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3262	'must be > 0.0'
[564]	3263	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3264	ENDIF
	3265	!
	3266	!-- Generate masks for masked data output
	3267	CALL init_masks
	3268	ENDIF
	3269
	3270	!
[493]	3271	!-- Check the NetCDF data format
[924]	3272	#if ! defined ( __check )
[1034]	3273	IF ( netcdf_data_format > 2 ) THEN
[924]	3274	#if defined( __netcdf4 )
[493]	3275	CONTINUE
	3276	#else
[1031]	3277	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3278	'cpp-directive __netcdf4 given & switch ' // &
	3279	'back to 64-bit offset format'
	3280	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3281	netcdf_data_format = 2
	3282	#endif
	3283	ENDIF
[1031]	3284	IF ( netcdf_data_format > 4 ) THEN
	3285	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3286	CONTINUE
	3287	#else
	3288	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3289	'cpp-directive __netcdf4_parallel given & switch ' // &
	3290	'back to netCDF4 non-parallel output'
	3291	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3292	netcdf_data_format = netcdf_data_format - 2
[892]	3293	#endif
[1031]	3294	ENDIF
	3295	#endif
[667]	3296
[809]	3297	#if ! defined( __check )
[1031]	3298	!
[1]	3299	!-- Check netcdf precison
	3300	ldum = .FALSE.
	3301	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3302	#endif
[1]	3303	!
	3304	!-- Check, whether a constant diffusion coefficient shall be used
	3305	IF ( km_constant /= -1.0 ) THEN
	3306	IF ( km_constant < 0.0 ) THEN
[215]	3307	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3308	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3309	ELSE
	3310	IF ( prandtl_number < 0.0 ) THEN
[215]	3311	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3312	' < 0.0'
[226]	3313	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3314	ENDIF
	3315	constant_diffusion = .TRUE.
	3316
	3317	IF ( prandtl_layer ) THEN
[215]	3318	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3319	'value of km'
[226]	3320	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3321	ENDIF
	3322	ENDIF
	3323	ENDIF
	3324
	3325	!
[978]	3326	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3327	!-- potential temperature, check the width of the damping layer
[1]	3328	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3329	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3330	message_string = 'pt_damping_width out of range'
[226]	3331	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3332	ENDIF
	3333	ENDIF
	3334
	3335	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3336	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3337	message_string = 'pt_damping_width out of range'
[226]	3338	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3339	ENDIF
	3340	ENDIF
	3341
	3342	!
	3343	!-- Check value range for rif
	3344	IF ( rif_min >= rif_max ) THEN
[215]	3345	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3346	'than rif_max = ', rif_max
[226]	3347	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3348	ENDIF
	3349
	3350	!
	3351	!-- Determine upper and lower hight level indices for random perturbations
[97]	3352	IF ( disturbance_level_b == -9999999.9 ) THEN
	3353	IF ( ocean ) THEN
	3354	disturbance_level_b = zu((nzt*2)/3)
	3355	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3356	ELSE
	3357	disturbance_level_b = zu(nzb+3)
	3358	disturbance_level_ind_b = nzb + 3
	3359	ENDIF
[1]	3360	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3361	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3362	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3363	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3364	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3365	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3366	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3367	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3368	ELSE
	3369	DO k = 3, nzt-2
	3370	IF ( disturbance_level_b <= zu(k) ) THEN
	3371	disturbance_level_ind_b = k
	3372	EXIT
	3373	ENDIF
	3374	ENDDO
	3375	ENDIF
	3376
[97]	3377	IF ( disturbance_level_t == -9999999.9 ) THEN
	3378	IF ( ocean ) THEN
	3379	disturbance_level_t = zu(nzt-3)
	3380	disturbance_level_ind_t = nzt - 3
	3381	ELSE
	3382	disturbance_level_t = zu(nzt/3)
	3383	disturbance_level_ind_t = nzt / 3
	3384	ENDIF
[1]	3385	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3386	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3387	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3388	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3389	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3390	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3391	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3392	disturbance_level_b
[226]	3393	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3394	ELSE
	3395	DO k = 3, nzt-2
	3396	IF ( disturbance_level_t <= zu(k) ) THEN
	3397	disturbance_level_ind_t = k
	3398	EXIT
	3399	ENDIF
	3400	ENDDO
	3401	ENDIF
	3402
	3403	!
	3404	!-- Check again whether the levels determined this way are ok.
	3405	!-- Error may occur at automatic determination and too few grid points in
	3406	!-- z-direction.
	3407	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3408	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3409	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3410	disturbance_level_b
[226]	3411	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3412	ENDIF
	3413
	3414	!
	3415	!-- Determine the horizontal index range for random perturbations.
	3416	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3417	!-- near the inflow and the perturbation area is further limited to ...(1)
	3418	!-- after the initial phase of the flow.
	3419	dist_nxl = 0; dist_nxr = nx
	3420	dist_nys = 0; dist_nyn = ny
	3421	IF ( bc_lr /= 'cyclic' ) THEN
	3422	IF ( inflow_disturbance_begin == -1 ) THEN
	3423	inflow_disturbance_begin = MIN( 10, nx/2 )
	3424	ENDIF
	3425	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3426	THEN
[215]	3427	message_string = 'inflow_disturbance_begin out of range'
[226]	3428	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3429	ENDIF
	3430	IF ( inflow_disturbance_end == -1 ) THEN
	3431	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3432	ENDIF
	3433	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3434	THEN
[215]	3435	message_string = 'inflow_disturbance_end out of range'
[226]	3436	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3437	ENDIF
	3438	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3439	IF ( inflow_disturbance_begin == -1 ) THEN
	3440	inflow_disturbance_begin = MIN( 10, ny/2 )
	3441	ENDIF
	3442	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3443	THEN
[215]	3444	message_string = 'inflow_disturbance_begin out of range'
[226]	3445	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3446	ENDIF
	3447	IF ( inflow_disturbance_end == -1 ) THEN
	3448	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3449	ENDIF
	3450	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3451	THEN
[215]	3452	message_string = 'inflow_disturbance_end out of range'
[226]	3453	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3454	ENDIF
	3455	ENDIF
	3456
[1159]	3457	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3458	dist_nxr = nx - inflow_disturbance_begin
	3459	dist_nxl(1) = nx - inflow_disturbance_end
[1159]	3460	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3461	dist_nxl = inflow_disturbance_begin
	3462	dist_nxr(1) = inflow_disturbance_end
[73]	3463	ENDIF
[1159]	3464	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3465	dist_nyn = ny - inflow_disturbance_begin
	3466	dist_nys(1) = ny - inflow_disturbance_end
[1159]	3467	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3468	dist_nys = inflow_disturbance_begin
	3469	dist_nyn(1) = inflow_disturbance_end
	3470	ENDIF
	3471
	3472	!
[151]	3473	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3474	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[1159]	3475	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3476	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3477	'condition at the inflow boundary'
[226]	3478	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3479	ENDIF
	3480
	3481	!
[1060]	3482	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
[1103]	3483	!-- data from prerun in the first main run
	3484	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
	3485	initializing_actions /= 'read_restart_data' ) THEN
[1060]	3486	message_string = 'turbulent_inflow = .T. requires ' // &
	3487	'initializing_actions = ''cyclic_fill'' '
	3488	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3489	ENDIF
	3490
	3491	!
[151]	3492	!-- In case of turbulent inflow calculate the index of the recycling plane
	3493	IF ( turbulent_inflow ) THEN
	3494	IF ( recycling_width == 9999999.9 ) THEN
	3495	!
	3496	!-- Set the default value for the width of the recycling domain
	3497	recycling_width = 0.1 * nx * dx
	3498	ELSE
	3499	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3500	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3501	' ', recycling_width
[226]	3502	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3503	ENDIF
	3504	ENDIF
	3505	!
	3506	!-- Calculate the index
	3507	recycling_plane = recycling_width / dx
	3508	ENDIF
	3509
	3510	!
[1]	3511	!-- Check random generator
	3512	IF ( random_generator /= 'system-specific' .AND. &
	3513	random_generator /= 'numerical-recipes' ) THEN
[215]	3514	message_string = 'unknown random generator: random_generator = "' // &
	3515	TRIM( random_generator ) // '"'
[226]	3516	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3517	ENDIF
	3518
	3519	!
	3520	!-- Determine damping level index for 1D model
	3521	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3522	IF ( damp_level_1d == -1.0 ) THEN
	3523	damp_level_1d = zu(nzt+1)
	3524	damp_level_ind_1d = nzt + 1
	3525	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3526	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3527	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3528	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3529	ELSE
	3530	DO k = 1, nzt+1
	3531	IF ( damp_level_1d <= zu(k) ) THEN
	3532	damp_level_ind_1d = k
	3533	EXIT
	3534	ENDIF
	3535	ENDDO
	3536	ENDIF
	3537	ENDIF
[215]	3538
[1]	3539	!
	3540	!-- Check some other 1d-model parameters
	3541	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3542	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3543	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3544	'" is unknown'
[226]	3545	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3546	ENDIF
	3547	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3548	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3549	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3550	'" is unknown'
[226]	3551	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3552	ENDIF
	3553
	3554	!
	3555	!-- Set time for the next user defined restart (time_restart is the
	3556	!-- internal parameter for steering restart events)
	3557	IF ( restart_time /= 9999999.9 ) THEN
[291]	3558	IF ( restart_time > time_since_reference_point ) THEN
	3559	time_restart = restart_time
	3560	ENDIF
[1]	3561	ELSE
	3562	!
	3563	!-- In case of a restart run, set internal parameter to default (no restart)
	3564	!-- if the NAMELIST-parameter restart_time is omitted
	3565	time_restart = 9999999.9
	3566	ENDIF
	3567
	3568	!
	3569	!-- Set default value of the time needed to terminate a model run
	3570	IF ( termination_time_needed == -1.0 ) THEN
	3571	IF ( host(1:3) == 'ibm' ) THEN
	3572	termination_time_needed = 300.0
	3573	ELSE
	3574	termination_time_needed = 35.0
	3575	ENDIF
	3576	ENDIF
	3577
	3578	!
	3579	!-- Check the time needed to terminate a model run
	3580	IF ( host(1:3) == 't3e' ) THEN
	3581	!
	3582	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3583	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3584	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3585	WRITE( message_string, * ) 'termination_time_needed = ', &
	3586	termination_time_needed, ' must be > 30.0 on host "', &
	3587	TRIM( host ), '"'
[226]	3588	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3589	ENDIF
	3590	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3591	!
	3592	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3593	!-- because the job time consumed before executing palm (for compiling,
	3594	!-- copying of files, etc.) has to be regarded
	3595	IF ( termination_time_needed < 300.0 ) THEN
[215]	3596	WRITE( message_string, * ) 'termination_time_needed = ', &
	3597	termination_time_needed, ' should be >= 300.0 on host "', &
	3598	TRIM( host ), '"'
[226]	3599	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3600	ENDIF
	3601	ENDIF
	3602
[217]	3603	!
[240]	3604	!-- Check pressure gradient conditions
	3605	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3606	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3607	'w are .TRUE. but one of them must be .FALSE.'
[240]	3608	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3609	ENDIF
	3610	IF ( dp_external ) THEN
	3611	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3612	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3613	' of range'
	3614	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3615	ENDIF
	3616	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3617	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3618	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3619	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3620	ENDIF
	3621	ENDIF
	3622	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3623	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3624	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3625	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3626	ENDIF
[241]	3627	IF ( conserve_volume_flow ) THEN
	3628	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3629
	3630	conserve_volume_flow_mode = 'initial_profiles'
	3631
[241]	3632	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3633	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3634	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3635	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3636	conserve_volume_flow_mode
	3637	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3638	ENDIF
[667]	3639	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3640	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3641	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3642	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3643	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3644	ENDIF
	3645	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3646	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3647	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3648	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3649	' or ''bulk_velocity'''
	3650	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3651	ENDIF
	3652	ENDIF
	3653	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3654	( .NOT. conserve_volume_flow .OR. &
	3655	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3656	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3657	'conserve_volume_flow = .T. and ', &
[241]	3658	'conserve_volume_flow_mode = ''bulk_velocity'''
	3659	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3660	ENDIF
[240]	3661
	3662	!
[264]	3663	!-- Check particle attributes
	3664	IF ( particle_color /= 'none' ) THEN
	3665	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3666	particle_color /= 'z' ) THEN
	3667	message_string = 'illegal value for parameter particle_color: ' // &
	3668	TRIM( particle_color)
	3669	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3670	ELSE
	3671	IF ( color_interval(2) <= color_interval(1) ) THEN
	3672	message_string = 'color_interval(2) <= color_interval(1)'
	3673	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3674	ENDIF
	3675	ENDIF
	3676	ENDIF
	3677
	3678	IF ( particle_dvrpsize /= 'none' ) THEN
	3679	IF ( particle_dvrpsize /= 'absw' ) THEN
	3680	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3681	' ' // TRIM( particle_color)
	3682	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3683	ELSE
	3684	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3685	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3686	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3687	ENDIF
	3688	ENDIF
	3689	ENDIF
	3690
	3691	!
[1241]	3692	!-- Check nudging and large scale forcing from external file
	3693	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
	3694	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
	3695	'Surface fluxes and geostrophic wind should be &'// &
	3696	'prescribed in file LSF_DATA'
	3697	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
	3698	ENDIF
	3699
	3700	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
	3701	bc_ns /= 'cyclic' ) ) THEN
	3702	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
	3703	'the usage of large scale forcing from external file.'
	3704	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
	3705	ENDIF
	3706
	3707	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
	3708	message_string = 'The usage of large scale forcing from external &'//&
	3709	'file LSF_DATA requires humidity = .T..'
	3710	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
	3711	ENDIF
	3712
	3713	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
	3714	message_string = 'The usage of large scale forcing from external &'//&
	3715	'file LSF_DATA is not implemented for non-flat topography'
	3716	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
	3717	ENDIF
	3718
	3719	IF ( large_scale_forcing .AND. ocean ) THEN
	3720	message_string = 'The usage of large scale forcing from external &'//&
	3721	'file LSF_DATA is not implemented for ocean runs'
	3722	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
	3723	ENDIF
	3724	!
[217]	3725	!-- Check &userpar parameters
	3726	CALL user_check_parameters
[1]	3727
[217]	3728
[667]	3729
[1]	3730	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |