[1] | 1 | SUBROUTINE check_parameters |
---|
| 2 | |
---|
[1036] | 3 | !--------------------------------------------------------------------------------! |
---|
| 4 | ! This file is part of PALM. |
---|
| 5 | ! |
---|
| 6 | ! PALM is free software: you can redistribute it and/or modify it under the terms |
---|
| 7 | ! of the GNU General Public License as published by the Free Software Foundation, |
---|
| 8 | ! either version 3 of the License, or (at your option) any later version. |
---|
| 9 | ! |
---|
| 10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY |
---|
| 11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
---|
| 12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
---|
| 13 | ! |
---|
| 14 | ! You should have received a copy of the GNU General Public License along with |
---|
| 15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
---|
| 16 | ! |
---|
| 17 | ! Copyright 1997-2012 Leibniz University Hannover |
---|
| 18 | !--------------------------------------------------------------------------------! |
---|
| 19 | ! |
---|
[484] | 20 | ! Current revisions: |
---|
[1] | 21 | ! ----------------- |
---|
[1277] | 22 | ! |
---|
[1242] | 23 | ! |
---|
| 24 | ! Former revisions: |
---|
| 25 | ! ----------------- |
---|
| 26 | ! $Id: check_parameters.f90 1277 2014-01-15 13:43:45Z raasch $ |
---|
| 27 | ! |
---|
[1277] | 28 | ! 1276 2014-01-15 13:40:41Z heinze |
---|
| 29 | ! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars |
---|
| 30 | ! |
---|
[1242] | 31 | ! 1241 2013-10-30 11:36:58Z heinze |
---|
[1241] | 32 | ! output for profiles of ug and vg added |
---|
| 33 | ! set surface_heatflux and surface_waterflux also in dependence on |
---|
| 34 | ! large_scale_forcing |
---|
| 35 | ! checks for nudging and large scale forcing from external file |
---|
[1054] | 36 | ! |
---|
[1237] | 37 | ! 1236 2013-09-27 07:21:13Z raasch |
---|
| 38 | ! check number of spectra levels |
---|
| 39 | ! |
---|
[1217] | 40 | ! 1216 2013-08-26 09:31:42Z raasch |
---|
| 41 | ! check for transpose_compute_overlap (temporary) |
---|
| 42 | ! |
---|
[1215] | 43 | ! 1214 2013-08-21 12:29:17Z kanani |
---|
| 44 | ! additional check for simultaneous use of vertical grid stretching |
---|
| 45 | ! and particle advection |
---|
| 46 | ! |
---|
[1213] | 47 | ! 1212 2013-08-15 08:46:27Z raasch |
---|
| 48 | ! checks for poisfft_hybrid removed |
---|
| 49 | ! |
---|
[1211] | 50 | ! 1210 2013-08-14 10:58:20Z raasch |
---|
| 51 | ! check for fftw |
---|
| 52 | ! |
---|
[1182] | 53 | ! 1179 2013-06-14 05:57:58Z raasch |
---|
| 54 | ! checks and settings of buoyancy parameters and switches revised, |
---|
| 55 | ! initial profile for rho added to hom (id=77) |
---|
| 56 | ! |
---|
[1175] | 57 | ! 1174 2013-05-31 10:28:08Z gryschka |
---|
| 58 | ! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere |
---|
| 59 | ! |
---|
[1160] | 60 | ! 1159 2013-05-21 11:58:22Z fricke |
---|
| 61 | ! bc_lr/ns_dirneu/neudir removed |
---|
| 62 | ! |
---|
[1116] | 63 | ! 1115 2013-03-26 18:16:16Z hoffmann |
---|
| 64 | ! unused variables removed |
---|
| 65 | ! drizzle can be used without precipitation |
---|
| 66 | ! |
---|
[1112] | 67 | ! 1111 2013-03-08 23:54:10Z raasch |
---|
| 68 | ! ibc_p_b = 2 removed |
---|
| 69 | ! |
---|
[1104] | 70 | ! 1103 2013-02-20 02:15:53Z raasch |
---|
| 71 | ! Bugfix: turbulent inflow must not require cyclic fill in restart runs |
---|
| 72 | ! |
---|
[1093] | 73 | ! 1092 2013-02-02 11:24:22Z raasch |
---|
| 74 | ! unused variables removed |
---|
| 75 | ! |
---|
[1070] | 76 | ! 1069 2012-11-28 16:18:43Z maronga |
---|
| 77 | ! allow usage of topography in combination with cloud physics |
---|
| 78 | ! |
---|
[1066] | 79 | ! 1065 2012-11-22 17:42:36Z hoffmann |
---|
| 80 | ! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without |
---|
| 81 | ! precipitation in order to save computational resources. |
---|
| 82 | ! |
---|
[1061] | 83 | ! 1060 2012-11-21 07:19:51Z raasch |
---|
| 84 | ! additional check for parameter turbulent_inflow |
---|
| 85 | ! |
---|
[1054] | 86 | ! 1053 2012-11-13 17:11:03Z hoffmann |
---|
[1053] | 87 | ! necessary changes for the new two-moment cloud physics scheme added: |
---|
| 88 | ! - check cloud physics scheme (Kessler or Seifert and Beheng) |
---|
| 89 | ! - plant_canopy is not allowed |
---|
| 90 | ! - currently, only cache loop_optimization is allowed |
---|
| 91 | ! - initial profiles of nr, qr |
---|
| 92 | ! - boundary condition of nr, qr |
---|
| 93 | ! - check output quantities (qr, nr, prr) |
---|
[979] | 94 | ! |
---|
[1037] | 95 | ! 1036 2012-10-22 13:43:42Z raasch |
---|
| 96 | ! code put under GPL (PALM 3.9) |
---|
| 97 | ! |
---|
[1035] | 98 | ! 1031/1034 2012-10-22 11:32:49Z raasch |
---|
| 99 | ! check of netcdf4 parallel file support |
---|
| 100 | ! |
---|
[1020] | 101 | ! 1019 2012-09-28 06:46:45Z raasch |
---|
| 102 | ! non-optimized version of prognostic_equations not allowed any more |
---|
| 103 | ! |
---|
[1017] | 104 | ! 1015 2012-09-27 09:23:24Z raasch |
---|
| 105 | ! acc allowed for loop optimization, |
---|
| 106 | ! checks for adjustment of mixing length to the Prandtl mixing length removed |
---|
| 107 | ! |
---|
[1004] | 108 | ! 1003 2012-09-14 14:35:53Z raasch |
---|
| 109 | ! checks for cases with unequal subdomain sizes removed |
---|
| 110 | ! |
---|
[1002] | 111 | ! 1001 2012-09-13 14:08:46Z raasch |
---|
| 112 | ! all actions concerning leapfrog- and upstream-spline-scheme removed |
---|
| 113 | ! |
---|
[997] | 114 | ! 996 2012-09-07 10:41:47Z raasch |
---|
| 115 | ! little reformatting |
---|
[1001] | 116 | |
---|
[979] | 117 | ! 978 2012-08-09 08:28:32Z fricke |
---|
[978] | 118 | ! setting of bc_lr/ns_dirneu/neudir |
---|
| 119 | ! outflow damping layer removed |
---|
| 120 | ! check for z0h* |
---|
| 121 | ! check for pt_damping_width |
---|
[667] | 122 | ! |
---|
[965] | 123 | ! 964 2012-07-26 09:14:24Z raasch |
---|
| 124 | ! check of old profil-parameters removed |
---|
| 125 | ! |
---|
[941] | 126 | ! 940 2012-07-09 14:31:00Z raasch |
---|
| 127 | ! checks for parameter neutral |
---|
| 128 | ! |
---|
[925] | 129 | ! 924 2012-06-06 07:44:41Z maronga |
---|
| 130 | ! Bugfix: preprocessor directives caused error during compilation |
---|
| 131 | ! |
---|
[893] | 132 | ! 892 2012-05-02 13:51:44Z maronga |
---|
| 133 | ! Bugfix for parameter file check ( excluding __netcdf4 ) |
---|
| 134 | ! |
---|
[867] | 135 | ! 866 2012-03-28 06:44:41Z raasch |
---|
| 136 | ! use only 60% of the geostrophic wind as translation speed in case of Galilean |
---|
| 137 | ! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the |
---|
| 138 | ! timestep |
---|
| 139 | ! |
---|
[863] | 140 | ! 861 2012-03-26 14:18:34Z suehring |
---|
| 141 | ! Check for topography and ws-scheme removed. |
---|
| 142 | ! Check for loop_optimization = 'vector' and ws-scheme removed. |
---|
| 143 | ! |
---|
[846] | 144 | ! 845 2012-03-07 10:23:05Z maronga |
---|
| 145 | ! Bugfix: exclude __netcdf4 directive part from namelist file check compilation |
---|
| 146 | ! |
---|
[829] | 147 | ! 828 2012-02-21 12:00:36Z raasch |
---|
| 148 | ! check of collision_kernel extended |
---|
| 149 | ! |
---|
[826] | 150 | ! 825 2012-02-19 03:03:44Z raasch |
---|
| 151 | ! check for collision_kernel and curvature_solution_effects |
---|
| 152 | ! |
---|
[810] | 153 | ! 809 2012-01-30 13:32:58Z maronga |
---|
| 154 | ! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives |
---|
| 155 | ! |
---|
[808] | 156 | ! 807 2012-01-25 11:53:51Z maronga |
---|
| 157 | ! New cpp directive "__check" implemented which is used by check_namelist_files |
---|
| 158 | ! |
---|
[775] | 159 | ! 774 2011-10-27 13:34:16Z letzel |
---|
| 160 | ! bugfix for prescribed u,v-profiles |
---|
| 161 | ! |
---|
[768] | 162 | ! 767 2011-10-14 06:39:12Z raasch |
---|
| 163 | ! Calculating u,v-profiles from given profiles by linear interpolation. |
---|
| 164 | ! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here |
---|
| 165 | ! |
---|
[708] | 166 | ! 707 2011-03-29 11:39:40Z raasch |
---|
| 167 | ! setting of bc_lr/ns_dirrad/raddir |
---|
| 168 | ! |
---|
| 169 | ! 689 2011-02-20 19:31:12z gryschka |
---|
[690] | 170 | ! Bugfix for some logical expressions |
---|
| 171 | ! (syntax was not compatible with all compilers) |
---|
[687] | 172 | ! |
---|
[690] | 173 | ! 680 2011-02-04 23:16:06Z gryschka |
---|
[681] | 174 | ! init_vortex is not allowed with volume_flow_control |
---|
[668] | 175 | ! |
---|
[674] | 176 | ! 673 2011-01-18 16:19:48Z suehring |
---|
| 177 | ! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws). |
---|
| 178 | ! |
---|
[668] | 179 | ! 667 2010-12-23 12:06:00Z suehring/gryschka |
---|
[667] | 180 | ! Exchange of parameters between ocean and atmosphere via PE0 |
---|
| 181 | ! Check for illegal combination of ws-scheme and timestep scheme. |
---|
| 182 | ! Check for topography and ws-scheme. |
---|
| 183 | ! Check for not cyclic boundary conditions in combination with ws-scheme and |
---|
| 184 | ! loop_optimization = 'vector'. |
---|
| 185 | ! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec. |
---|
| 186 | ! Different processor/grid topology in atmosphere and ocean is now allowed! |
---|
| 187 | ! Bugfixes in checking for conserve_volume_flow_mode |
---|
[601] | 188 | ! 600 2010-11-24 16:10:51Z raasch |
---|
| 189 | ! change due to new default value of surface_waterflux |
---|
[581] | 190 | ! 580 2010-10-05 13:59:11Z heinze |
---|
[601] | 191 | ! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level |
---|
[581] | 192 | ! |
---|
[568] | 193 | ! 567 2010-10-01 10:46:30Z helmke |
---|
| 194 | ! calculating masks changed |
---|
| 195 | ! |
---|
[565] | 196 | ! 564 2010-09-30 13:18:59Z helmke |
---|
| 197 | ! palm message identifiers of masked output changed, 20 replaced by max_masks |
---|
| 198 | ! |
---|
[554] | 199 | ! 553 2010-09-01 14:09:06Z weinreis |
---|
| 200 | ! masks is calculated and removed from inipar |
---|
[532] | 201 | ! |
---|
| 202 | ! 531 2010-04-21 06:47:21Z heinze |
---|
| 203 | ! Bugfix: unit of hyp changed to dbar |
---|
[392] | 204 | ! |
---|
[525] | 205 | ! 524 2010-03-30 02:04:51Z raasch |
---|
| 206 | ! Bugfix: "/" in netcdf profile variable names replaced by ":" |
---|
| 207 | ! |
---|
[494] | 208 | ! 493 2010-03-01 08:30:24Z raasch |
---|
| 209 | ! netcdf_data_format is checked |
---|
| 210 | ! |
---|
[449] | 211 | ! 411 2009-12-11 14:15:58Z heinze |
---|
| 212 | ! Enabled passive scalar/humidity wall fluxes for non-flat topography |
---|
| 213 | ! Initialization of large scale vertical motion (subsidence/ascent) |
---|
| 214 | ! |
---|
| 215 | ! 410 2009-12-04 17:05:40Z letzel |
---|
| 216 | ! masked data output |
---|
| 217 | ! |
---|
[392] | 218 | ! 388 2009-09-23 09:40:33Z raasch |
---|
[388] | 219 | ! Check profiles fpr prho and hyp. |
---|
[376] | 220 | ! Bugfix: output of averaged 2d/3d quantities requires that an avaraging |
---|
| 221 | ! interval has been set, respective error message is included |
---|
[366] | 222 | ! bc_lr_cyc and bc_ns_cyc are set, |
---|
[328] | 223 | ! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill' |
---|
[308] | 224 | ! Check for illegal entries in section_xy|xz|yz that exceed nz+1|ny+1|nx+1 |
---|
[291] | 225 | ! Coupling with independent precursor runs. |
---|
[264] | 226 | ! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval |
---|
[232] | 227 | ! Bugfix: pressure included for profile output |
---|
[240] | 228 | ! Check pressure gradient conditions |
---|
[256] | 229 | ! topography_grid_convention moved from user_check_parameters |
---|
| 230 | ! 'single_street_canyon' |
---|
[367] | 231 | ! Added shf* and qsws* to the list of available output data |
---|
[226] | 232 | ! |
---|
| 233 | ! 222 2009-01-12 16:04:16Z letzel |
---|
[217] | 234 | ! +user_check_parameters |
---|
[213] | 235 | ! Output of messages replaced by message handling routine. |
---|
[206] | 236 | ! Implementation of an MPI-1 coupling: replaced myid with target_id, |
---|
| 237 | ! deleted __mpi2 directives |
---|
[222] | 238 | ! Check that PALM is called with mrun -K parallel for coupling |
---|
[198] | 239 | ! |
---|
| 240 | ! 197 2008-09-16 15:29:03Z raasch |
---|
[177] | 241 | ! Bug fix: Construction of vertical profiles when 10 gradients have been |
---|
[181] | 242 | ! specified in the parameter list (ug, vg, pt, q, sa, lad) |
---|
| 243 | ! |
---|
| 244 | ! Strict grid matching along z is not needed for mg-solver. |
---|
[153] | 245 | ! Leaf area density (LAD) explicitly set to its surface value at k=0 |
---|
[151] | 246 | ! Case of reading data for recycling included in initializing_actions, |
---|
[197] | 247 | ! check of turbulent_inflow and calculation of recycling_plane. |
---|
| 248 | ! q*2 profile added |
---|
[139] | 249 | ! |
---|
| 250 | ! 138 2007-11-28 10:03:58Z letzel |
---|
[138] | 251 | ! Plant canopy added |
---|
[132] | 252 | ! Allow new case bc_uv_t = 'dirichlet_0' for channel flow. |
---|
[116] | 253 | ! Multigrid solver allows topography, checking of dt_sort_particles |
---|
[121] | 254 | ! Bugfix: initializing u_init and v_init in case of ocean runs |
---|
[110] | 255 | ! |
---|
| 256 | ! 109 2007-08-28 15:26:47Z letzel |
---|
[102] | 257 | ! Check coupling_mode and set default (obligatory) values (like boundary |
---|
[106] | 258 | ! conditions for temperature and fluxes) in case of coupled runs. |
---|
| 259 | ! +profiles for w*p* and w"e |
---|
[104] | 260 | ! Bugfix: Error message concerning output of particle concentration (pc) |
---|
| 261 | ! modified |
---|
[108] | 262 | ! More checks and more default values for coupled runs |
---|
| 263 | ! allow data_output_pr= q, wq, w"q", w*q* for humidity = .T. (instead of |
---|
| 264 | ! cloud_physics = .T.) |
---|
| 265 | ! Rayleigh damping for ocean fixed. |
---|
[109] | 266 | ! Check and, if necessary, set default value for dt_coupling |
---|
[98] | 267 | ! |
---|
| 268 | ! 97 2007-06-21 08:23:15Z raasch |
---|
[97] | 269 | ! Initial salinity profile is calculated, salinity boundary conditions are |
---|
| 270 | ! checked, |
---|
[94] | 271 | ! z_max_do1d is checked only in case of ocean = .f., |
---|
[97] | 272 | ! +initial temperature and geostrophic velocity profiles for the ocean version, |
---|
| 273 | ! use_pt_reference renamed use_reference |
---|
[77] | 274 | ! |
---|
[90] | 275 | ! 89 2007-05-25 12:08:31Z raasch |
---|
| 276 | ! Check for user-defined profiles |
---|
| 277 | ! |
---|
[77] | 278 | ! 75 2007-03-22 09:54:05Z raasch |
---|
[51] | 279 | ! "by_user" allowed as initializing action, -data_output_ts, |
---|
[63] | 280 | ! leapfrog with non-flat topography not allowed any more, loop_optimization |
---|
[75] | 281 | ! and pt_reference are checked, moisture renamed humidity, |
---|
[72] | 282 | ! output of precipitation amount/rate and roughnes length + check |
---|
[73] | 283 | ! possible negative humidities are avoided in initial profile, |
---|
[75] | 284 | ! dirichlet/neumann changed to dirichlet/radiation, etc., |
---|
| 285 | ! revision added to run_description_header |
---|
[1] | 286 | ! |
---|
[39] | 287 | ! 20 2007-02-26 00:12:32Z raasch |
---|
| 288 | ! Temperature and humidity gradients at top are now calculated for nzt+1, |
---|
| 289 | ! top_heatflux and respective boundary condition bc_pt_t is checked |
---|
| 290 | ! |
---|
[3] | 291 | ! RCS Log replace by Id keyword, revision history cleaned up |
---|
| 292 | ! |
---|
[1] | 293 | ! Revision 1.61 2006/08/04 14:20:25 raasch |
---|
| 294 | ! do2d_unit and do3d_unit now defined as 2d-arrays, check of |
---|
| 295 | ! use_upstream_for_tke, default value for dt_dopts, |
---|
| 296 | ! generation of file header moved from routines palm and header to here |
---|
| 297 | ! |
---|
| 298 | ! Revision 1.1 1997/08/26 06:29:23 raasch |
---|
| 299 | ! Initial revision |
---|
| 300 | ! |
---|
| 301 | ! |
---|
| 302 | ! Description: |
---|
| 303 | ! ------------ |
---|
| 304 | ! Check control parameters and deduce further quantities. |
---|
| 305 | !------------------------------------------------------------------------------! |
---|
| 306 | |
---|
| 307 | USE arrays_3d |
---|
[824] | 308 | USE cloud_parameters |
---|
[1] | 309 | USE constants |
---|
| 310 | USE control_parameters |
---|
[264] | 311 | USE dvrp_variables |
---|
[1] | 312 | USE grid_variables |
---|
| 313 | USE indices |
---|
| 314 | USE model_1d |
---|
| 315 | USE netcdf_control |
---|
| 316 | USE particle_attributes |
---|
| 317 | USE pegrid |
---|
| 318 | USE profil_parameter |
---|
[1236] | 319 | USE spectrum |
---|
| 320 | USE statistics |
---|
[411] | 321 | USE subsidence_mod |
---|
[1241] | 322 | USE statistics |
---|
[1] | 323 | USE transpose_indices |
---|
| 324 | |
---|
| 325 | IMPLICIT NONE |
---|
| 326 | |
---|
| 327 | CHARACTER (LEN=1) :: sq |
---|
| 328 | CHARACTER (LEN=6) :: var |
---|
| 329 | CHARACTER (LEN=7) :: unit |
---|
| 330 | CHARACTER (LEN=8) :: date |
---|
| 331 | CHARACTER (LEN=10) :: time |
---|
[102] | 332 | CHARACTER (LEN=40) :: coupling_string |
---|
[1] | 333 | CHARACTER (LEN=100) :: action |
---|
| 334 | |
---|
[1092] | 335 | INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec |
---|
[1] | 336 | LOGICAL :: found, ldum |
---|
[1092] | 337 | REAL :: gradient, remote = 0.0, simulation_time_since_reference |
---|
[1] | 338 | |
---|
| 339 | ! |
---|
[1216] | 340 | !-- Check for overlap combinations, which are not realized yet |
---|
| 341 | IF ( transpose_compute_overlap ) THEN |
---|
| 342 | IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs' |
---|
| 343 | #if defined( __openacc ) |
---|
| 344 | STOP '+++ transpose-compute-overlap not implemented for GPU usage' |
---|
| 345 | #endif |
---|
| 346 | ENDIF |
---|
| 347 | |
---|
| 348 | ! |
---|
[1] | 349 | !-- Warning, if host is not set |
---|
| 350 | IF ( host(1:1) == ' ' ) THEN |
---|
[213] | 351 | message_string = '"host" is not set. Please check that environment ' // & |
---|
| 352 | 'variable "localhost" & is set before running PALM' |
---|
[226] | 353 | CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 ) |
---|
[1] | 354 | ENDIF |
---|
| 355 | |
---|
| 356 | ! |
---|
[102] | 357 | !-- Check the coupling mode |
---|
| 358 | IF ( coupling_mode /= 'uncoupled' .AND. & |
---|
| 359 | coupling_mode /= 'atmosphere_to_ocean' .AND. & |
---|
| 360 | coupling_mode /= 'ocean_to_atmosphere' ) THEN |
---|
[213] | 361 | message_string = 'illegal coupling mode: ' // TRIM( coupling_mode ) |
---|
[226] | 362 | CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 ) |
---|
[102] | 363 | ENDIF |
---|
| 364 | |
---|
| 365 | ! |
---|
[108] | 366 | !-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny |
---|
[667] | 367 | IF ( coupling_mode /= 'uncoupled') THEN |
---|
[213] | 368 | |
---|
[108] | 369 | IF ( dt_coupling == 9999999.9 ) THEN |
---|
[213] | 370 | message_string = 'dt_coupling is not set but required for coup' // & |
---|
| 371 | 'ling mode "' // TRIM( coupling_mode ) // '"' |
---|
[226] | 372 | CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 ) |
---|
[108] | 373 | ENDIF |
---|
[213] | 374 | |
---|
[206] | 375 | #if defined( __parallel ) |
---|
[807] | 376 | |
---|
| 377 | ! |
---|
| 378 | !-- NOTE: coupled runs have not been implemented in the check_namelist_files |
---|
| 379 | !-- program. |
---|
| 380 | !-- check_namelist_files will need the following information of the other |
---|
| 381 | !-- model (atmosphere/ocean). |
---|
[845] | 382 | ! dt_coupling = remote |
---|
| 383 | ! dt_max = remote |
---|
| 384 | ! restart_time = remote |
---|
| 385 | ! dt_restart= remote |
---|
| 386 | ! simulation_time_since_reference = remote |
---|
| 387 | ! dx = remote |
---|
[807] | 388 | |
---|
| 389 | |
---|
[809] | 390 | #if ! defined( __check ) |
---|
[667] | 391 | IF ( myid == 0 ) THEN |
---|
| 392 | CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, & |
---|
| 393 | ierr ) |
---|
| 394 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, & |
---|
| 395 | status, ierr ) |
---|
| 396 | ENDIF |
---|
| 397 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 398 | #endif |
---|
[108] | 399 | IF ( dt_coupling /= remote ) THEN |
---|
[213] | 400 | WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), & |
---|
| 401 | '": dt_coupling = ', dt_coupling, '& is not equal to ', & |
---|
| 402 | 'dt_coupling_remote = ', remote |
---|
[226] | 403 | CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 ) |
---|
[108] | 404 | ENDIF |
---|
[109] | 405 | IF ( dt_coupling <= 0.0 ) THEN |
---|
[809] | 406 | #if ! defined( __check ) |
---|
[667] | 407 | IF ( myid == 0 ) THEN |
---|
| 408 | CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr ) |
---|
| 409 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, & |
---|
| 410 | status, ierr ) |
---|
| 411 | ENDIF |
---|
| 412 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 413 | #endif |
---|
[109] | 414 | dt_coupling = MAX( dt_max, remote ) |
---|
[213] | 415 | WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), & |
---|
| 416 | '": dt_coupling <= 0.0 & is not allowed and is reset to ', & |
---|
| 417 | 'MAX(dt_max(A,O)) = ', dt_coupling |
---|
[226] | 418 | CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 ) |
---|
[109] | 419 | ENDIF |
---|
[809] | 420 | #if ! defined( __check ) |
---|
[667] | 421 | IF ( myid == 0 ) THEN |
---|
| 422 | CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, & |
---|
| 423 | ierr ) |
---|
| 424 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, & |
---|
| 425 | status, ierr ) |
---|
| 426 | ENDIF |
---|
| 427 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 428 | #endif |
---|
[108] | 429 | IF ( restart_time /= remote ) THEN |
---|
[213] | 430 | WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), & |
---|
| 431 | '": restart_time = ', restart_time, '& is not equal to ', & |
---|
| 432 | 'restart_time_remote = ', remote |
---|
[226] | 433 | CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 ) |
---|
[108] | 434 | ENDIF |
---|
[809] | 435 | #if ! defined( __check ) |
---|
[667] | 436 | IF ( myid == 0 ) THEN |
---|
| 437 | CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, & |
---|
| 438 | ierr ) |
---|
| 439 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, & |
---|
| 440 | status, ierr ) |
---|
| 441 | ENDIF |
---|
| 442 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 443 | #endif |
---|
[108] | 444 | IF ( dt_restart /= remote ) THEN |
---|
[213] | 445 | WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), & |
---|
| 446 | '": dt_restart = ', dt_restart, '& is not equal to ', & |
---|
| 447 | 'dt_restart_remote = ', remote |
---|
[226] | 448 | CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 ) |
---|
[108] | 449 | ENDIF |
---|
[213] | 450 | |
---|
[291] | 451 | simulation_time_since_reference = end_time - coupling_start_time |
---|
[809] | 452 | #if ! defined( __check ) |
---|
[667] | 453 | IF ( myid == 0 ) THEN |
---|
| 454 | CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, & |
---|
| 455 | 14, comm_inter, ierr ) |
---|
| 456 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, & |
---|
| 457 | status, ierr ) |
---|
| 458 | ENDIF |
---|
| 459 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 460 | #endif |
---|
[291] | 461 | IF ( simulation_time_since_reference /= remote ) THEN |
---|
[213] | 462 | WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), & |
---|
[291] | 463 | '": simulation_time_since_reference = ', & |
---|
| 464 | simulation_time_since_reference, '& is not equal to ', & |
---|
| 465 | 'simulation_time_since_reference_remote = ', remote |
---|
[226] | 466 | CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 ) |
---|
[108] | 467 | ENDIF |
---|
[213] | 468 | |
---|
[809] | 469 | #if ! defined( __check ) |
---|
[667] | 470 | IF ( myid == 0 ) THEN |
---|
| 471 | CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr ) |
---|
| 472 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, & |
---|
| 473 | status, ierr ) |
---|
[108] | 474 | ENDIF |
---|
[667] | 475 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[213] | 476 | |
---|
[807] | 477 | #endif |
---|
[667] | 478 | IF ( coupling_mode == 'atmosphere_to_ocean') THEN |
---|
| 479 | |
---|
| 480 | IF ( dx < remote ) THEN |
---|
| 481 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 482 | TRIM( coupling_mode ), & |
---|
| 483 | '": dx in Atmosphere is not equal to or not larger then dx in ocean' |
---|
| 484 | CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 ) |
---|
| 485 | ENDIF |
---|
| 486 | |
---|
| 487 | IF ( (nx_a+1)*dx /= (nx_o+1)*remote ) THEN |
---|
| 488 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 489 | TRIM( coupling_mode ), & |
---|
| 490 | '": Domain size in x-direction is not equal in ocean and atmosphere' |
---|
| 491 | CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 ) |
---|
| 492 | ENDIF |
---|
| 493 | |
---|
[108] | 494 | ENDIF |
---|
[213] | 495 | |
---|
[809] | 496 | #if ! defined( __check ) |
---|
[667] | 497 | IF ( myid == 0) THEN |
---|
| 498 | CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr ) |
---|
| 499 | CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, & |
---|
| 500 | status, ierr ) |
---|
[108] | 501 | ENDIF |
---|
[667] | 502 | CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr) |
---|
[807] | 503 | #endif |
---|
[667] | 504 | IF ( coupling_mode == 'atmosphere_to_ocean') THEN |
---|
| 505 | |
---|
| 506 | IF ( dy < remote ) THEN |
---|
| 507 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 508 | TRIM( coupling_mode ), & |
---|
| 509 | '": dy in Atmosphere is not equal to or not larger then dy in ocean' |
---|
| 510 | CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 ) |
---|
| 511 | ENDIF |
---|
| 512 | |
---|
| 513 | IF ( (ny_a+1)*dy /= (ny_o+1)*remote ) THEN |
---|
| 514 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 515 | TRIM( coupling_mode ), & |
---|
| 516 | '": Domain size in y-direction is not equal in ocean and atmosphere' |
---|
| 517 | CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 ) |
---|
| 518 | ENDIF |
---|
| 519 | |
---|
| 520 | IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN |
---|
| 521 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 522 | TRIM( coupling_mode ), & |
---|
| 523 | '": nx+1 in ocean is not divisible without remainder with nx+1 in', & |
---|
| 524 | ' atmosphere' |
---|
| 525 | CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 ) |
---|
| 526 | ENDIF |
---|
| 527 | |
---|
| 528 | IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN |
---|
| 529 | WRITE( message_string, * ) 'coupling mode "', & |
---|
| 530 | TRIM( coupling_mode ), & |
---|
| 531 | '": ny+1 in ocean is not divisible without remainder with ny+1 in', & |
---|
| 532 | ' atmosphere' |
---|
| 533 | CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 ) |
---|
| 534 | ENDIF |
---|
| 535 | |
---|
[108] | 536 | ENDIF |
---|
[222] | 537 | #else |
---|
| 538 | WRITE( message_string, * ) 'coupling requires PALM to be called with', & |
---|
| 539 | ' ''mrun -K parallel''' |
---|
[226] | 540 | CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 ) |
---|
[108] | 541 | #endif |
---|
| 542 | ENDIF |
---|
| 543 | |
---|
[809] | 544 | #if defined( __parallel ) && ! defined ( __check ) |
---|
[108] | 545 | ! |
---|
| 546 | !-- Exchange via intercommunicator |
---|
[667] | 547 | IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN |
---|
[206] | 548 | CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, & |
---|
| 549 | ierr ) |
---|
[667] | 550 | ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN |
---|
[206] | 551 | CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, & |
---|
| 552 | comm_inter, status, ierr ) |
---|
[108] | 553 | ENDIF |
---|
[667] | 554 | CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr) |
---|
| 555 | |
---|
[108] | 556 | #endif |
---|
| 557 | |
---|
| 558 | |
---|
| 559 | ! |
---|
[1] | 560 | !-- Generate the file header which is used as a header for most of PALM's |
---|
| 561 | !-- output files |
---|
| 562 | CALL DATE_AND_TIME( date, time ) |
---|
| 563 | run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4) |
---|
| 564 | run_time = time(1:2)//':'//time(3:4)//':'//time(5:6) |
---|
[102] | 565 | IF ( coupling_mode == 'uncoupled' ) THEN |
---|
| 566 | coupling_string = '' |
---|
| 567 | ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN |
---|
| 568 | coupling_string = ' coupled (atmosphere)' |
---|
| 569 | ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN |
---|
| 570 | coupling_string = ' coupled (ocean)' |
---|
| 571 | ENDIF |
---|
[1] | 572 | |
---|
[102] | 573 | WRITE ( run_description_header, & |
---|
| 574 | '(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) & |
---|
| 575 | TRIM( version ), TRIM( revision ), 'run: ', & |
---|
| 576 | TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), & |
---|
| 577 | 'host: ', TRIM( host ), run_date, run_time |
---|
[1] | 578 | |
---|
| 579 | ! |
---|
[63] | 580 | !-- Check the general loop optimization method |
---|
| 581 | IF ( loop_optimization == 'default' ) THEN |
---|
| 582 | IF ( host(1:3) == 'nec' ) THEN |
---|
| 583 | loop_optimization = 'vector' |
---|
| 584 | ELSE |
---|
| 585 | loop_optimization = 'cache' |
---|
| 586 | ENDIF |
---|
| 587 | ENDIF |
---|
| 588 | |
---|
[1015] | 589 | SELECT CASE ( TRIM( loop_optimization ) ) |
---|
| 590 | |
---|
[1019] | 591 | CASE ( 'acc', 'cache', 'vector' ) |
---|
[1015] | 592 | CONTINUE |
---|
| 593 | |
---|
| 594 | CASE DEFAULT |
---|
| 595 | message_string = 'illegal value given for loop_optimization: "' // & |
---|
| 596 | TRIM( loop_optimization ) // '"' |
---|
| 597 | CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 ) |
---|
| 598 | |
---|
| 599 | END SELECT |
---|
| 600 | |
---|
[63] | 601 | ! |
---|
[1214] | 602 | !-- Check if vertical grid stretching is used together with particles |
---|
| 603 | IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN |
---|
| 604 | message_string = 'Vertical grid stretching is not allowed together ' // & |
---|
| 605 | 'with particle advection.' |
---|
| 606 | CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 ) |
---|
| 607 | ENDIF |
---|
| 608 | |
---|
| 609 | ! |
---|
[1] | 610 | !-- Check topography setting (check for illegal parameter combinations) |
---|
| 611 | IF ( topography /= 'flat' ) THEN |
---|
| 612 | action = ' ' |
---|
[861] | 613 | IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN |
---|
[1] | 614 | WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec |
---|
| 615 | ENDIF |
---|
[861] | 616 | IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) & |
---|
| 617 | THEN |
---|
[1] | 618 | WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec |
---|
| 619 | ENDIF |
---|
[114] | 620 | IF ( psolver == 'sor' ) THEN |
---|
[1] | 621 | WRITE( action, '(A,A)' ) 'psolver = ', psolver |
---|
| 622 | ENDIF |
---|
| 623 | IF ( sloping_surface ) THEN |
---|
| 624 | WRITE( action, '(A)' ) 'sloping surface = .TRUE.' |
---|
| 625 | ENDIF |
---|
| 626 | IF ( galilei_transformation ) THEN |
---|
| 627 | WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.' |
---|
| 628 | ENDIF |
---|
[1115] | 629 | IF ( cloud_physics ) THEN |
---|
| 630 | WRITE( action, '(A)' ) 'cloud_physics = .TRUE.' |
---|
| 631 | ENDIF |
---|
[1] | 632 | IF ( cloud_droplets ) THEN |
---|
[1115] | 633 | WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.' |
---|
[1] | 634 | ENDIF |
---|
| 635 | IF ( .NOT. prandtl_layer ) THEN |
---|
| 636 | WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.' |
---|
| 637 | ENDIF |
---|
| 638 | IF ( action /= ' ' ) THEN |
---|
[213] | 639 | message_string = 'a non-flat topography does not allow ' // & |
---|
| 640 | TRIM( action ) |
---|
[226] | 641 | CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 ) |
---|
[1] | 642 | ENDIF |
---|
[256] | 643 | ! |
---|
| 644 | !-- In case of non-flat topography, check whether the convention how to |
---|
| 645 | !-- define the topography grid has been set correctly, or whether the default |
---|
| 646 | !-- is applicable. If this is not possible, abort. |
---|
| 647 | IF ( TRIM( topography_grid_convention ) == ' ' ) THEN |
---|
| 648 | IF ( TRIM( topography ) /= 'single_building' .AND. & |
---|
| 649 | TRIM( topography ) /= 'single_street_canyon' .AND. & |
---|
| 650 | TRIM( topography ) /= 'read_from_file' ) THEN |
---|
| 651 | !-- The default value is not applicable here, because it is only valid |
---|
| 652 | !-- for the two standard cases 'single_building' and 'read_from_file' |
---|
| 653 | !-- defined in init_grid. |
---|
| 654 | WRITE( message_string, * ) & |
---|
| 655 | 'The value for "topography_grid_convention" ', & |
---|
| 656 | 'is not set. Its default value is & only valid for ', & |
---|
| 657 | '"topography" = ''single_building'', ', & |
---|
| 658 | '''single_street_canyon'' & or ''read_from_file''.', & |
---|
| 659 | ' & Choose ''cell_edge'' or ''cell_center''.' |
---|
| 660 | CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 ) |
---|
| 661 | ELSE |
---|
| 662 | !-- The default value is applicable here. |
---|
| 663 | !-- Set convention according to topography. |
---|
| 664 | IF ( TRIM( topography ) == 'single_building' .OR. & |
---|
| 665 | TRIM( topography ) == 'single_street_canyon' ) THEN |
---|
| 666 | topography_grid_convention = 'cell_edge' |
---|
| 667 | ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN |
---|
| 668 | topography_grid_convention = 'cell_center' |
---|
| 669 | ENDIF |
---|
| 670 | ENDIF |
---|
| 671 | ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. & |
---|
| 672 | TRIM( topography_grid_convention ) /= 'cell_center' ) THEN |
---|
| 673 | WRITE( message_string, * ) & |
---|
| 674 | 'The value for "topography_grid_convention" is ', & |
---|
| 675 | 'not recognized. & Choose ''cell_edge'' or ''cell_center''.' |
---|
| 676 | CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 ) |
---|
| 677 | ENDIF |
---|
| 678 | |
---|
[1] | 679 | ENDIF |
---|
[94] | 680 | |
---|
[1] | 681 | ! |
---|
[94] | 682 | !-- Check ocean setting |
---|
| 683 | IF ( ocean ) THEN |
---|
[332] | 684 | |
---|
[94] | 685 | action = ' ' |
---|
| 686 | IF ( action /= ' ' ) THEN |
---|
[213] | 687 | message_string = 'ocean = .T. does not allow ' // TRIM( action ) |
---|
[226] | 688 | CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 ) |
---|
[94] | 689 | ENDIF |
---|
| 690 | |
---|
[332] | 691 | ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. & |
---|
| 692 | TRIM( coupling_char ) == '_O' ) THEN |
---|
[343] | 693 | |
---|
[94] | 694 | ! |
---|
[332] | 695 | !-- Check whether an (uncoupled) atmospheric run has been declared as an |
---|
| 696 | !-- ocean run (this setting is done via mrun-option -y) |
---|
[343] | 697 | |
---|
[291] | 698 | message_string = 'ocean = .F. does not allow coupling_char = "' // & |
---|
| 699 | TRIM( coupling_char ) // '" set by mrun-option "-y"' |
---|
| 700 | CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 ) |
---|
[332] | 701 | |
---|
[291] | 702 | ENDIF |
---|
| 703 | ! |
---|
[1053] | 704 | !-- Check cloud scheme |
---|
| 705 | IF ( cloud_scheme == 'seifert_beheng' ) THEN |
---|
| 706 | icloud_scheme = 0 |
---|
| 707 | ELSEIF ( cloud_scheme == 'kessler' ) THEN |
---|
| 708 | icloud_scheme = 1 |
---|
| 709 | ELSE |
---|
| 710 | message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // & |
---|
| 711 | TRIM( cloud_scheme ) // '"' |
---|
| 712 | CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 ) |
---|
| 713 | ENDIF |
---|
| 714 | ! |
---|
[1] | 715 | !-- Check whether there are any illegal values |
---|
| 716 | !-- Pressure solver: |
---|
[1212] | 717 | IF ( psolver /= 'poisfft' .AND. & |
---|
[1] | 718 | psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN |
---|
[213] | 719 | message_string = 'unknown solver for perturbation pressure: psolver' // & |
---|
| 720 | ' = "' // TRIM( psolver ) // '"' |
---|
[226] | 721 | CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 ) |
---|
[1] | 722 | ENDIF |
---|
| 723 | |
---|
| 724 | IF ( psolver == 'multigrid' ) THEN |
---|
| 725 | IF ( cycle_mg == 'w' ) THEN |
---|
| 726 | gamma_mg = 2 |
---|
| 727 | ELSEIF ( cycle_mg == 'v' ) THEN |
---|
| 728 | gamma_mg = 1 |
---|
| 729 | ELSE |
---|
[213] | 730 | message_string = 'unknown multigrid cycle: cycle_mg = "' // & |
---|
| 731 | TRIM( cycle_mg ) // '"' |
---|
[226] | 732 | CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 ) |
---|
[1] | 733 | ENDIF |
---|
| 734 | ENDIF |
---|
| 735 | |
---|
| 736 | IF ( fft_method /= 'singleton-algorithm' .AND. & |
---|
| 737 | fft_method /= 'temperton-algorithm' .AND. & |
---|
[1210] | 738 | fft_method /= 'fftw' .AND. & |
---|
[1] | 739 | fft_method /= 'system-specific' ) THEN |
---|
[213] | 740 | message_string = 'unknown fft-algorithm: fft_method = "' // & |
---|
| 741 | TRIM( fft_method ) // '"' |
---|
[226] | 742 | CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 ) |
---|
[1] | 743 | ENDIF |
---|
[667] | 744 | |
---|
| 745 | IF( momentum_advec == 'ws-scheme' .AND. & |
---|
[688] | 746 | .NOT. call_psolver_at_all_substeps ) THEN |
---|
[667] | 747 | message_string = 'psolver must be called at each RK3 substep when "'//& |
---|
| 748 | TRIM(momentum_advec) // ' "is used for momentum_advec' |
---|
[685] | 749 | CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 ) |
---|
[667] | 750 | END IF |
---|
[1] | 751 | ! |
---|
| 752 | !-- Advection schemes: |
---|
[1001] | 753 | IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) & |
---|
| 754 | THEN |
---|
[214] | 755 | message_string = 'unknown advection scheme: momentum_advec = "' // & |
---|
| 756 | TRIM( momentum_advec ) // '"' |
---|
[226] | 757 | CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 ) |
---|
[1] | 758 | ENDIF |
---|
[1001] | 759 | IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) & |
---|
| 760 | .AND. ( timestep_scheme == 'euler' .OR. & |
---|
| 761 | timestep_scheme == 'runge-kutta-2' ) ) & |
---|
| 762 | THEN |
---|
[667] | 763 | message_string = 'momentum_advec or scalar_advec = "' & |
---|
| 764 | // TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // & |
---|
| 765 | TRIM( timestep_scheme ) // '"' |
---|
[226] | 766 | CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 ) |
---|
[1] | 767 | ENDIF |
---|
[667] | 768 | IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. & |
---|
[1001] | 769 | scalar_advec /= 'bc-scheme' ) & |
---|
| 770 | THEN |
---|
[214] | 771 | message_string = 'unknown advection scheme: scalar_advec = "' // & |
---|
| 772 | TRIM( scalar_advec ) // '"' |
---|
[226] | 773 | CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 ) |
---|
[1] | 774 | ENDIF |
---|
[1019] | 775 | IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) & |
---|
| 776 | THEN |
---|
| 777 | message_string = 'advection_scheme scalar_advec = "' & |
---|
| 778 | // TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // & |
---|
| 779 | TRIM( loop_optimization ) // '"' |
---|
| 780 | CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 ) |
---|
| 781 | ENDIF |
---|
[1] | 782 | |
---|
| 783 | IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN |
---|
| 784 | use_upstream_for_tke = .TRUE. |
---|
[214] | 785 | message_string = 'use_upstream_for_tke set .TRUE. because ' // & |
---|
| 786 | 'use_sgs_for_particles = .TRUE.' |
---|
[226] | 787 | CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 ) |
---|
[1] | 788 | ENDIF |
---|
| 789 | |
---|
[824] | 790 | IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN |
---|
| 791 | message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // & |
---|
| 792 | 'curvature_solution_effects = .TRUE.' |
---|
| 793 | CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 ) |
---|
| 794 | ENDIF |
---|
| 795 | |
---|
[1] | 796 | ! |
---|
[1019] | 797 | !-- Set LOGICAL switches to enhance performance |
---|
| 798 | IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE. |
---|
| 799 | IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE. |
---|
| 800 | |
---|
| 801 | ! |
---|
[1] | 802 | !-- Timestep schemes: |
---|
| 803 | SELECT CASE ( TRIM( timestep_scheme ) ) |
---|
| 804 | |
---|
| 805 | CASE ( 'euler' ) |
---|
| 806 | intermediate_timestep_count_max = 1 |
---|
| 807 | |
---|
| 808 | CASE ( 'runge-kutta-2' ) |
---|
| 809 | intermediate_timestep_count_max = 2 |
---|
| 810 | |
---|
| 811 | CASE ( 'runge-kutta-3' ) |
---|
| 812 | intermediate_timestep_count_max = 3 |
---|
| 813 | |
---|
| 814 | CASE DEFAULT |
---|
[214] | 815 | message_string = 'unknown timestep scheme: timestep_scheme = "' // & |
---|
| 816 | TRIM( timestep_scheme ) // '"' |
---|
[226] | 817 | CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 ) |
---|
[1] | 818 | |
---|
| 819 | END SELECT |
---|
| 820 | |
---|
[667] | 821 | IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') & |
---|
| 822 | .AND. timestep_scheme(1:5) == 'runge' ) THEN |
---|
[214] | 823 | message_string = 'momentum advection scheme "' // & |
---|
| 824 | TRIM( momentum_advec ) // '" & does not work with ' // & |
---|
| 825 | 'timestep_scheme "' // TRIM( timestep_scheme ) // '"' |
---|
[226] | 826 | CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 ) |
---|
[1] | 827 | ENDIF |
---|
| 828 | |
---|
[825] | 829 | ! |
---|
| 830 | !-- Collision kernels: |
---|
| 831 | SELECT CASE ( TRIM( collision_kernel ) ) |
---|
| 832 | |
---|
[828] | 833 | CASE ( 'hall', 'hall_fast' ) |
---|
[825] | 834 | hall_kernel = .TRUE. |
---|
| 835 | |
---|
| 836 | CASE ( 'palm' ) |
---|
| 837 | palm_kernel = .TRUE. |
---|
| 838 | |
---|
[828] | 839 | CASE ( 'wang', 'wang_fast' ) |
---|
[825] | 840 | wang_kernel = .TRUE. |
---|
| 841 | |
---|
| 842 | CASE ( 'none' ) |
---|
| 843 | |
---|
| 844 | |
---|
| 845 | CASE DEFAULT |
---|
| 846 | message_string = 'unknown collision kernel: collision_kernel = "' // & |
---|
| 847 | TRIM( collision_kernel ) // '"' |
---|
| 848 | CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 ) |
---|
| 849 | |
---|
| 850 | END SELECT |
---|
[828] | 851 | IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE. |
---|
[825] | 852 | |
---|
[147] | 853 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. & |
---|
[328] | 854 | TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN |
---|
[1] | 855 | ! |
---|
[214] | 856 | !-- No restart run: several initialising actions are possible |
---|
[1] | 857 | action = initializing_actions |
---|
| 858 | DO WHILE ( TRIM( action ) /= '' ) |
---|
| 859 | position = INDEX( action, ' ' ) |
---|
| 860 | SELECT CASE ( action(1:position-1) ) |
---|
| 861 | |
---|
| 862 | CASE ( 'set_constant_profiles', 'set_1d-model_profiles', & |
---|
[46] | 863 | 'by_user', 'initialize_vortex', 'initialize_ptanom' ) |
---|
[1] | 864 | action = action(position+1:) |
---|
| 865 | |
---|
| 866 | CASE DEFAULT |
---|
[214] | 867 | message_string = 'initializing_action = "' // & |
---|
| 868 | TRIM( action ) // '" unkown or not allowed' |
---|
[226] | 869 | CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 ) |
---|
[1] | 870 | |
---|
| 871 | END SELECT |
---|
| 872 | ENDDO |
---|
| 873 | ENDIF |
---|
[214] | 874 | |
---|
[680] | 875 | IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. & |
---|
| 876 | conserve_volume_flow ) THEN |
---|
| 877 | message_string = 'initializing_actions = "initialize_vortex"' // & |
---|
| 878 | ' ist not allowed with conserve_volume_flow = .T.' |
---|
| 879 | CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 ) |
---|
| 880 | ENDIF |
---|
| 881 | |
---|
| 882 | |
---|
[1] | 883 | IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. & |
---|
| 884 | INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN |
---|
[214] | 885 | message_string = 'initializing_actions = "set_constant_profiles"' // & |
---|
| 886 | ' and "set_1d-model_profiles" are not allowed ' // & |
---|
| 887 | 'simultaneously' |
---|
[226] | 888 | CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 ) |
---|
[1] | 889 | ENDIF |
---|
[214] | 890 | |
---|
[46] | 891 | IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. & |
---|
| 892 | INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN |
---|
[214] | 893 | message_string = 'initializing_actions = "set_constant_profiles"' // & |
---|
| 894 | ' and "by_user" are not allowed simultaneously' |
---|
[226] | 895 | CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 ) |
---|
[46] | 896 | ENDIF |
---|
[214] | 897 | |
---|
[46] | 898 | IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. & |
---|
| 899 | INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN |
---|
[214] | 900 | message_string = 'initializing_actions = "by_user" and ' // & |
---|
| 901 | '"set_1d-model_profiles" are not allowed simultaneously' |
---|
[226] | 902 | CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 ) |
---|
[46] | 903 | ENDIF |
---|
[1] | 904 | |
---|
[75] | 905 | IF ( cloud_physics .AND. .NOT. humidity ) THEN |
---|
[214] | 906 | WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', & |
---|
| 907 | 'not allowed with humidity = ', humidity |
---|
[226] | 908 | CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 ) |
---|
[1] | 909 | ENDIF |
---|
| 910 | |
---|
[72] | 911 | IF ( precipitation .AND. .NOT. cloud_physics ) THEN |
---|
[214] | 912 | WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', & |
---|
| 913 | 'not allowed with cloud_physics = ', cloud_physics |
---|
[226] | 914 | CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 ) |
---|
[72] | 915 | ENDIF |
---|
| 916 | |
---|
[75] | 917 | IF ( humidity .AND. sloping_surface ) THEN |
---|
[214] | 918 | message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // & |
---|
| 919 | 'are not allowed simultaneously' |
---|
[226] | 920 | CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 ) |
---|
[1] | 921 | ENDIF |
---|
| 922 | |
---|
[75] | 923 | IF ( passive_scalar .AND. humidity ) THEN |
---|
[214] | 924 | message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // & |
---|
| 925 | 'is not allowed simultaneously' |
---|
[226] | 926 | CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 ) |
---|
[1] | 927 | ENDIF |
---|
| 928 | |
---|
[138] | 929 | IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN |
---|
[214] | 930 | message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // & |
---|
| 931 | 'coefficient & given value is drag_coefficient = 0.0' |
---|
[226] | 932 | CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 ) |
---|
[138] | 933 | ENDIF |
---|
| 934 | |
---|
[1053] | 935 | IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN |
---|
| 936 | message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // & |
---|
| 937 | ' seifert_beheng' |
---|
| 938 | CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 ) |
---|
| 939 | ENDIF |
---|
| 940 | |
---|
| 941 | IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. & |
---|
| 942 | icloud_scheme == 0 ) THEN |
---|
| 943 | message_string = 'cloud_scheme = seifert_beheng requires ' // & |
---|
| 944 | 'loop_optimization = cache' |
---|
| 945 | CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 ) |
---|
| 946 | ENDIF |
---|
| 947 | |
---|
[1115] | 948 | ! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. & |
---|
| 949 | ! .NOT. precipitation .AND. .NOT. drizzle ) THEN |
---|
| 950 | ! message_string = 'cloud_scheme = seifert_beheng requires ' // & |
---|
| 951 | ! 'precipitation = .TRUE. or drizzle = .TRUE.' |
---|
| 952 | ! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 ) |
---|
| 953 | ! ENDIF |
---|
[1065] | 954 | |
---|
[1] | 955 | ! |
---|
| 956 | !-- In case of no model continuation run, check initialising parameters and |
---|
| 957 | !-- deduce further quantities |
---|
| 958 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
| 959 | |
---|
| 960 | ! |
---|
[767] | 961 | !-- Initial profiles for 1D and 3D model, respectively (u,v further below) |
---|
[1] | 962 | pt_init = pt_surface |
---|
[1053] | 963 | IF ( humidity ) THEN |
---|
| 964 | q_init = q_surface |
---|
| 965 | ENDIF |
---|
[94] | 966 | IF ( ocean ) sa_init = sa_surface |
---|
| 967 | IF ( passive_scalar ) q_init = s_surface |
---|
[138] | 968 | IF ( plant_canopy ) lad = 0.0 |
---|
[1] | 969 | |
---|
| 970 | ! |
---|
| 971 | !-- |
---|
| 972 | !-- If required, compute initial profile of the geostrophic wind |
---|
| 973 | !-- (component ug) |
---|
| 974 | i = 1 |
---|
| 975 | gradient = 0.0 |
---|
[97] | 976 | |
---|
| 977 | IF ( .NOT. ocean ) THEN |
---|
| 978 | |
---|
| 979 | ug_vertical_gradient_level_ind(1) = 0 |
---|
| 980 | ug(0) = ug_surface |
---|
| 981 | DO k = 1, nzt+1 |
---|
[177] | 982 | IF ( i < 11 ) THEN |
---|
| 983 | IF ( ug_vertical_gradient_level(i) < zu(k) .AND. & |
---|
| 984 | ug_vertical_gradient_level(i) >= 0.0 ) THEN |
---|
| 985 | gradient = ug_vertical_gradient(i) / 100.0 |
---|
| 986 | ug_vertical_gradient_level_ind(i) = k - 1 |
---|
| 987 | i = i + 1 |
---|
[1] | 988 | ENDIF |
---|
[177] | 989 | ENDIF |
---|
[97] | 990 | IF ( gradient /= 0.0 ) THEN |
---|
| 991 | IF ( k /= 1 ) THEN |
---|
| 992 | ug(k) = ug(k-1) + dzu(k) * gradient |
---|
| 993 | ELSE |
---|
[1174] | 994 | ug(k) = ug_surface + dzu(k) * gradient |
---|
[97] | 995 | ENDIF |
---|
[1] | 996 | ELSE |
---|
[97] | 997 | ug(k) = ug(k-1) |
---|
[1] | 998 | ENDIF |
---|
[97] | 999 | ENDDO |
---|
[1] | 1000 | |
---|
[97] | 1001 | ELSE |
---|
| 1002 | |
---|
| 1003 | ug_vertical_gradient_level_ind(1) = nzt+1 |
---|
[121] | 1004 | ug(nzt+1) = ug_surface |
---|
[667] | 1005 | DO k = nzt, nzb, -1 |
---|
[177] | 1006 | IF ( i < 11 ) THEN |
---|
| 1007 | IF ( ug_vertical_gradient_level(i) > zu(k) .AND. & |
---|
| 1008 | ug_vertical_gradient_level(i) <= 0.0 ) THEN |
---|
| 1009 | gradient = ug_vertical_gradient(i) / 100.0 |
---|
| 1010 | ug_vertical_gradient_level_ind(i) = k + 1 |
---|
| 1011 | i = i + 1 |
---|
[97] | 1012 | ENDIF |
---|
| 1013 | ENDIF |
---|
| 1014 | IF ( gradient /= 0.0 ) THEN |
---|
| 1015 | IF ( k /= nzt ) THEN |
---|
| 1016 | ug(k) = ug(k+1) - dzu(k+1) * gradient |
---|
| 1017 | ELSE |
---|
| 1018 | ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient |
---|
| 1019 | ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient |
---|
| 1020 | ENDIF |
---|
| 1021 | ELSE |
---|
| 1022 | ug(k) = ug(k+1) |
---|
| 1023 | ENDIF |
---|
| 1024 | ENDDO |
---|
| 1025 | |
---|
| 1026 | ENDIF |
---|
| 1027 | |
---|
[1] | 1028 | ! |
---|
[767] | 1029 | !-- In case of no given gradients for ug, choose a zero gradient |
---|
[97] | 1030 | IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN |
---|
[1] | 1031 | ug_vertical_gradient_level(1) = 0.0 |
---|
| 1032 | ENDIF |
---|
| 1033 | |
---|
| 1034 | ! |
---|
| 1035 | !-- |
---|
| 1036 | !-- If required, compute initial profile of the geostrophic wind |
---|
| 1037 | !-- (component vg) |
---|
| 1038 | i = 1 |
---|
| 1039 | gradient = 0.0 |
---|
[97] | 1040 | |
---|
| 1041 | IF ( .NOT. ocean ) THEN |
---|
| 1042 | |
---|
| 1043 | vg_vertical_gradient_level_ind(1) = 0 |
---|
| 1044 | vg(0) = vg_surface |
---|
| 1045 | DO k = 1, nzt+1 |
---|
[177] | 1046 | IF ( i < 11 ) THEN |
---|
| 1047 | IF ( vg_vertical_gradient_level(i) < zu(k) .AND. & |
---|
| 1048 | vg_vertical_gradient_level(i) >= 0.0 ) THEN |
---|
| 1049 | gradient = vg_vertical_gradient(i) / 100.0 |
---|
| 1050 | vg_vertical_gradient_level_ind(i) = k - 1 |
---|
| 1051 | i = i + 1 |
---|
[1] | 1052 | ENDIF |
---|
| 1053 | ENDIF |
---|
[97] | 1054 | IF ( gradient /= 0.0 ) THEN |
---|
| 1055 | IF ( k /= 1 ) THEN |
---|
| 1056 | vg(k) = vg(k-1) + dzu(k) * gradient |
---|
| 1057 | ELSE |
---|
[1174] | 1058 | vg(k) = vg_surface + dzu(k) * gradient |
---|
[97] | 1059 | ENDIF |
---|
[1] | 1060 | ELSE |
---|
[97] | 1061 | vg(k) = vg(k-1) |
---|
[1] | 1062 | ENDIF |
---|
[97] | 1063 | ENDDO |
---|
[1] | 1064 | |
---|
[97] | 1065 | ELSE |
---|
| 1066 | |
---|
[121] | 1067 | vg_vertical_gradient_level_ind(1) = nzt+1 |
---|
| 1068 | vg(nzt+1) = vg_surface |
---|
[667] | 1069 | DO k = nzt, nzb, -1 |
---|
[177] | 1070 | IF ( i < 11 ) THEN |
---|
| 1071 | IF ( vg_vertical_gradient_level(i) > zu(k) .AND. & |
---|
| 1072 | vg_vertical_gradient_level(i) <= 0.0 ) THEN |
---|
| 1073 | gradient = vg_vertical_gradient(i) / 100.0 |
---|
| 1074 | vg_vertical_gradient_level_ind(i) = k + 1 |
---|
| 1075 | i = i + 1 |
---|
[97] | 1076 | ENDIF |
---|
| 1077 | ENDIF |
---|
| 1078 | IF ( gradient /= 0.0 ) THEN |
---|
| 1079 | IF ( k /= nzt ) THEN |
---|
| 1080 | vg(k) = vg(k+1) - dzu(k+1) * gradient |
---|
| 1081 | ELSE |
---|
| 1082 | vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient |
---|
| 1083 | vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient |
---|
| 1084 | ENDIF |
---|
| 1085 | ELSE |
---|
| 1086 | vg(k) = vg(k+1) |
---|
| 1087 | ENDIF |
---|
| 1088 | ENDDO |
---|
| 1089 | |
---|
| 1090 | ENDIF |
---|
| 1091 | |
---|
[1] | 1092 | ! |
---|
[767] | 1093 | !-- In case of no given gradients for vg, choose a zero gradient |
---|
[97] | 1094 | IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN |
---|
[1] | 1095 | vg_vertical_gradient_level(1) = 0.0 |
---|
| 1096 | ENDIF |
---|
| 1097 | |
---|
| 1098 | ! |
---|
[767] | 1099 | !-- Let the initial wind profiles be the calculated ug/vg profiles or |
---|
| 1100 | !-- interpolate them from wind profile data (if given) |
---|
| 1101 | IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN |
---|
| 1102 | |
---|
| 1103 | u_init = ug |
---|
| 1104 | v_init = vg |
---|
| 1105 | |
---|
| 1106 | ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN |
---|
| 1107 | |
---|
| 1108 | IF ( uv_heights(1) /= 0.0 ) THEN |
---|
| 1109 | message_string = 'uv_heights(1) must be 0.0' |
---|
| 1110 | CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 ) |
---|
| 1111 | ENDIF |
---|
| 1112 | |
---|
| 1113 | use_prescribed_profile_data = .TRUE. |
---|
| 1114 | |
---|
| 1115 | kk = 1 |
---|
| 1116 | u_init(0) = 0.0 |
---|
| 1117 | v_init(0) = 0.0 |
---|
| 1118 | |
---|
| 1119 | DO k = 1, nz+1 |
---|
| 1120 | |
---|
| 1121 | IF ( kk < 100 ) THEN |
---|
| 1122 | DO WHILE ( uv_heights(kk+1) <= zu(k) ) |
---|
| 1123 | kk = kk + 1 |
---|
| 1124 | IF ( kk == 100 ) EXIT |
---|
| 1125 | ENDDO |
---|
| 1126 | ENDIF |
---|
| 1127 | |
---|
[774] | 1128 | IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN |
---|
[767] | 1129 | u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / & |
---|
| 1130 | ( uv_heights(kk+1) - uv_heights(kk) ) * & |
---|
| 1131 | ( u_profile(kk+1) - u_profile(kk) ) |
---|
| 1132 | v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / & |
---|
| 1133 | ( uv_heights(kk+1) - uv_heights(kk) ) * & |
---|
| 1134 | ( v_profile(kk+1) - v_profile(kk) ) |
---|
| 1135 | ELSE |
---|
| 1136 | u_init(k) = u_profile(kk) |
---|
| 1137 | v_init(k) = v_profile(kk) |
---|
| 1138 | ENDIF |
---|
| 1139 | |
---|
| 1140 | ENDDO |
---|
| 1141 | |
---|
| 1142 | ELSE |
---|
| 1143 | |
---|
| 1144 | message_string = 'u_profile(1) and v_profile(1) must be 0.0' |
---|
| 1145 | CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 ) |
---|
| 1146 | |
---|
| 1147 | ENDIF |
---|
| 1148 | |
---|
| 1149 | ! |
---|
[94] | 1150 | !-- Compute initial temperature profile using the given temperature gradients |
---|
[940] | 1151 | IF ( .NOT. neutral ) THEN |
---|
[94] | 1152 | |
---|
[940] | 1153 | i = 1 |
---|
| 1154 | gradient = 0.0 |
---|
[94] | 1155 | |
---|
[940] | 1156 | IF ( .NOT. ocean ) THEN |
---|
| 1157 | |
---|
| 1158 | pt_vertical_gradient_level_ind(1) = 0 |
---|
| 1159 | DO k = 1, nzt+1 |
---|
| 1160 | IF ( i < 11 ) THEN |
---|
| 1161 | IF ( pt_vertical_gradient_level(i) < zu(k) .AND. & |
---|
| 1162 | pt_vertical_gradient_level(i) >= 0.0 ) THEN |
---|
| 1163 | gradient = pt_vertical_gradient(i) / 100.0 |
---|
| 1164 | pt_vertical_gradient_level_ind(i) = k - 1 |
---|
| 1165 | i = i + 1 |
---|
| 1166 | ENDIF |
---|
[1] | 1167 | ENDIF |
---|
[940] | 1168 | IF ( gradient /= 0.0 ) THEN |
---|
| 1169 | IF ( k /= 1 ) THEN |
---|
| 1170 | pt_init(k) = pt_init(k-1) + dzu(k) * gradient |
---|
| 1171 | ELSE |
---|
[1174] | 1172 | pt_init(k) = pt_surface + dzu(k) * gradient |
---|
[940] | 1173 | ENDIF |
---|
[94] | 1174 | ELSE |
---|
[940] | 1175 | pt_init(k) = pt_init(k-1) |
---|
[94] | 1176 | ENDIF |
---|
[940] | 1177 | ENDDO |
---|
[1] | 1178 | |
---|
[940] | 1179 | ELSE |
---|
[94] | 1180 | |
---|
[940] | 1181 | pt_vertical_gradient_level_ind(1) = nzt+1 |
---|
| 1182 | DO k = nzt, 0, -1 |
---|
| 1183 | IF ( i < 11 ) THEN |
---|
| 1184 | IF ( pt_vertical_gradient_level(i) > zu(k) .AND. & |
---|
| 1185 | pt_vertical_gradient_level(i) <= 0.0 ) THEN |
---|
| 1186 | gradient = pt_vertical_gradient(i) / 100.0 |
---|
| 1187 | pt_vertical_gradient_level_ind(i) = k + 1 |
---|
| 1188 | i = i + 1 |
---|
| 1189 | ENDIF |
---|
[94] | 1190 | ENDIF |
---|
[940] | 1191 | IF ( gradient /= 0.0 ) THEN |
---|
| 1192 | IF ( k /= nzt ) THEN |
---|
| 1193 | pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient |
---|
| 1194 | ELSE |
---|
| 1195 | pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient |
---|
| 1196 | pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient |
---|
| 1197 | ENDIF |
---|
[94] | 1198 | ELSE |
---|
[940] | 1199 | pt_init(k) = pt_init(k+1) |
---|
[94] | 1200 | ENDIF |
---|
[940] | 1201 | ENDDO |
---|
[94] | 1202 | |
---|
[940] | 1203 | ENDIF |
---|
| 1204 | |
---|
[94] | 1205 | ENDIF |
---|
| 1206 | |
---|
[1] | 1207 | ! |
---|
| 1208 | !-- In case of no given temperature gradients, choose gradient of neutral |
---|
| 1209 | !-- stratification |
---|
[94] | 1210 | IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN |
---|
[1] | 1211 | pt_vertical_gradient_level(1) = 0.0 |
---|
| 1212 | ENDIF |
---|
| 1213 | |
---|
| 1214 | ! |
---|
[94] | 1215 | !-- Store temperature gradient at the top boundary for possible Neumann |
---|
[1] | 1216 | !-- boundary condition |
---|
[19] | 1217 | bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1) |
---|
[1] | 1218 | |
---|
| 1219 | ! |
---|
| 1220 | !-- If required, compute initial humidity or scalar profile using the given |
---|
| 1221 | !-- humidity/scalar gradient. In case of scalar transport, initially store |
---|
| 1222 | !-- values of the scalar parameters on humidity parameters |
---|
| 1223 | IF ( passive_scalar ) THEN |
---|
| 1224 | bc_q_b = bc_s_b |
---|
| 1225 | bc_q_t = bc_s_t |
---|
| 1226 | q_surface = s_surface |
---|
| 1227 | q_surface_initial_change = s_surface_initial_change |
---|
| 1228 | q_vertical_gradient = s_vertical_gradient |
---|
| 1229 | q_vertical_gradient_level = s_vertical_gradient_level |
---|
| 1230 | surface_waterflux = surface_scalarflux |
---|
[407] | 1231 | wall_humidityflux = wall_scalarflux |
---|
[1] | 1232 | ENDIF |
---|
| 1233 | |
---|
[75] | 1234 | IF ( humidity .OR. passive_scalar ) THEN |
---|
[1] | 1235 | |
---|
| 1236 | i = 1 |
---|
| 1237 | gradient = 0.0 |
---|
| 1238 | q_vertical_gradient_level_ind(1) = 0 |
---|
| 1239 | DO k = 1, nzt+1 |
---|
[177] | 1240 | IF ( i < 11 ) THEN |
---|
| 1241 | IF ( q_vertical_gradient_level(i) < zu(k) .AND. & |
---|
| 1242 | q_vertical_gradient_level(i) >= 0.0 ) THEN |
---|
| 1243 | gradient = q_vertical_gradient(i) / 100.0 |
---|
| 1244 | q_vertical_gradient_level_ind(i) = k - 1 |
---|
| 1245 | i = i + 1 |
---|
[1] | 1246 | ENDIF |
---|
| 1247 | ENDIF |
---|
| 1248 | IF ( gradient /= 0.0 ) THEN |
---|
| 1249 | IF ( k /= 1 ) THEN |
---|
| 1250 | q_init(k) = q_init(k-1) + dzu(k) * gradient |
---|
| 1251 | ELSE |
---|
[1174] | 1252 | q_init(k) = q_init(k-1) + dzu(k) * gradient |
---|
[1] | 1253 | ENDIF |
---|
| 1254 | ELSE |
---|
| 1255 | q_init(k) = q_init(k-1) |
---|
| 1256 | ENDIF |
---|
[72] | 1257 | ! |
---|
| 1258 | !-- Avoid negative humidities |
---|
| 1259 | IF ( q_init(k) < 0.0 ) THEN |
---|
| 1260 | q_init(k) = 0.0 |
---|
| 1261 | ENDIF |
---|
[1] | 1262 | ENDDO |
---|
| 1263 | |
---|
| 1264 | ! |
---|
| 1265 | !-- In case of no given humidity gradients, choose zero gradient |
---|
| 1266 | !-- conditions |
---|
| 1267 | IF ( q_vertical_gradient_level(1) == -1.0 ) THEN |
---|
| 1268 | q_vertical_gradient_level(1) = 0.0 |
---|
| 1269 | ENDIF |
---|
| 1270 | ! |
---|
[1053] | 1271 | !-- Store humidity, rain water content and rain drop concentration |
---|
| 1272 | !-- gradient at the top boundary for possile Neumann boundary condition |
---|
| 1273 | bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1) |
---|
[1] | 1274 | ENDIF |
---|
| 1275 | |
---|
[94] | 1276 | ! |
---|
| 1277 | !-- If required, compute initial salinity profile using the given salinity |
---|
| 1278 | !-- gradients |
---|
| 1279 | IF ( ocean ) THEN |
---|
| 1280 | |
---|
| 1281 | i = 1 |
---|
| 1282 | gradient = 0.0 |
---|
| 1283 | |
---|
| 1284 | sa_vertical_gradient_level_ind(1) = nzt+1 |
---|
| 1285 | DO k = nzt, 0, -1 |
---|
[177] | 1286 | IF ( i < 11 ) THEN |
---|
| 1287 | IF ( sa_vertical_gradient_level(i) > zu(k) .AND. & |
---|
| 1288 | sa_vertical_gradient_level(i) <= 0.0 ) THEN |
---|
| 1289 | gradient = sa_vertical_gradient(i) / 100.0 |
---|
| 1290 | sa_vertical_gradient_level_ind(i) = k + 1 |
---|
| 1291 | i = i + 1 |
---|
[94] | 1292 | ENDIF |
---|
| 1293 | ENDIF |
---|
| 1294 | IF ( gradient /= 0.0 ) THEN |
---|
| 1295 | IF ( k /= nzt ) THEN |
---|
| 1296 | sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient |
---|
| 1297 | ELSE |
---|
| 1298 | sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient |
---|
| 1299 | sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient |
---|
| 1300 | ENDIF |
---|
| 1301 | ELSE |
---|
| 1302 | sa_init(k) = sa_init(k+1) |
---|
| 1303 | ENDIF |
---|
| 1304 | ENDDO |
---|
| 1305 | |
---|
| 1306 | ENDIF |
---|
| 1307 | |
---|
[138] | 1308 | ! |
---|
[388] | 1309 | !-- If required compute the profile of leaf area density used in the plant |
---|
| 1310 | !-- canopy model |
---|
[138] | 1311 | IF ( plant_canopy ) THEN |
---|
| 1312 | |
---|
| 1313 | i = 1 |
---|
| 1314 | gradient = 0.0 |
---|
[1] | 1315 | |
---|
[138] | 1316 | IF ( .NOT. ocean ) THEN |
---|
[153] | 1317 | |
---|
| 1318 | lad(0) = lad_surface |
---|
[138] | 1319 | |
---|
| 1320 | lad_vertical_gradient_level_ind(1) = 0 |
---|
| 1321 | DO k = 1, pch_index |
---|
[177] | 1322 | IF ( i < 11 ) THEN |
---|
| 1323 | IF ( lad_vertical_gradient_level(i) < zu(k) .AND. & |
---|
| 1324 | lad_vertical_gradient_level(i) >= 0.0 ) THEN |
---|
| 1325 | gradient = lad_vertical_gradient(i) |
---|
| 1326 | lad_vertical_gradient_level_ind(i) = k - 1 |
---|
| 1327 | i = i + 1 |
---|
[138] | 1328 | ENDIF |
---|
| 1329 | ENDIF |
---|
| 1330 | IF ( gradient /= 0.0 ) THEN |
---|
| 1331 | IF ( k /= 1 ) THEN |
---|
| 1332 | lad(k) = lad(k-1) + dzu(k) * gradient |
---|
| 1333 | ELSE |
---|
[1174] | 1334 | lad(k) = lad_surface + dzu(k) *gradient |
---|
[138] | 1335 | ENDIF |
---|
| 1336 | ELSE |
---|
| 1337 | lad(k) = lad(k-1) |
---|
| 1338 | ENDIF |
---|
| 1339 | ENDDO |
---|
| 1340 | |
---|
| 1341 | ENDIF |
---|
| 1342 | |
---|
[1] | 1343 | ! |
---|
[388] | 1344 | !-- In case of no given leaf area density gradients, choose a vanishing |
---|
| 1345 | !-- gradient |
---|
[138] | 1346 | IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN |
---|
| 1347 | lad_vertical_gradient_level(1) = 0.0 |
---|
| 1348 | ENDIF |
---|
| 1349 | |
---|
| 1350 | ENDIF |
---|
| 1351 | |
---|
| 1352 | ENDIF |
---|
[411] | 1353 | |
---|
| 1354 | ! |
---|
| 1355 | !-- Initialize large scale subsidence if required |
---|
[580] | 1356 | IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN |
---|
[411] | 1357 | large_scale_subsidence = .TRUE. |
---|
| 1358 | CALL init_w_subsidence |
---|
[1179] | 1359 | ENDIF |
---|
[667] | 1360 | |
---|
[138] | 1361 | ! |
---|
[1] | 1362 | !-- Compute Coriolis parameter |
---|
| 1363 | f = 2.0 * omega * SIN( phi / 180.0 * pi ) |
---|
| 1364 | fs = 2.0 * omega * COS( phi / 180.0 * pi ) |
---|
| 1365 | |
---|
| 1366 | ! |
---|
[1179] | 1367 | !-- Check and set buoyancy related parameters and switches |
---|
| 1368 | IF ( reference_state == 'horizontal_average' ) THEN |
---|
| 1369 | CONTINUE |
---|
| 1370 | ELSEIF ( reference_state == 'initial_profile' ) THEN |
---|
| 1371 | use_initial_profile_as_reference = .TRUE. |
---|
| 1372 | ELSEIF ( reference_state == 'single_value' ) THEN |
---|
| 1373 | use_single_reference_value = .TRUE. |
---|
| 1374 | IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface |
---|
| 1375 | vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface ) |
---|
| 1376 | ELSE |
---|
| 1377 | message_string = 'illegal value for reference_state: "' // & |
---|
| 1378 | TRIM( reference_state ) // '"' |
---|
| 1379 | CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 ) |
---|
| 1380 | ENDIF |
---|
[57] | 1381 | |
---|
| 1382 | ! |
---|
[1179] | 1383 | !-- Ocean runs always use reference values in the buoyancy term |
---|
| 1384 | IF ( ocean ) THEN |
---|
| 1385 | reference_state = 'single_value' |
---|
| 1386 | use_single_reference_value = .TRUE. |
---|
| 1387 | ENDIF |
---|
[97] | 1388 | |
---|
| 1389 | ! |
---|
| 1390 | !-- Sign of buoyancy/stability terms |
---|
| 1391 | IF ( ocean ) atmos_ocean_sign = -1.0 |
---|
| 1392 | |
---|
| 1393 | ! |
---|
[108] | 1394 | !-- Ocean version must use flux boundary conditions at the top |
---|
| 1395 | IF ( ocean .AND. .NOT. use_top_fluxes ) THEN |
---|
[215] | 1396 | message_string = 'use_top_fluxes must be .TRUE. in ocean version' |
---|
[226] | 1397 | CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 ) |
---|
[108] | 1398 | ENDIF |
---|
[97] | 1399 | |
---|
| 1400 | ! |
---|
[1] | 1401 | !-- In case of a given slope, compute the relevant quantities |
---|
| 1402 | IF ( alpha_surface /= 0.0 ) THEN |
---|
| 1403 | IF ( ABS( alpha_surface ) > 90.0 ) THEN |
---|
[215] | 1404 | WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, & |
---|
| 1405 | ' ) must be < 90.0' |
---|
[226] | 1406 | CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 ) |
---|
[1] | 1407 | ENDIF |
---|
| 1408 | sloping_surface = .TRUE. |
---|
| 1409 | cos_alpha_surface = COS( alpha_surface / 180.0 * pi ) |
---|
| 1410 | sin_alpha_surface = SIN( alpha_surface / 180.0 * pi ) |
---|
| 1411 | ENDIF |
---|
| 1412 | |
---|
| 1413 | ! |
---|
| 1414 | !-- Check time step and cfl_factor |
---|
| 1415 | IF ( dt /= -1.0 ) THEN |
---|
| 1416 | IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN |
---|
[215] | 1417 | WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0' |
---|
[226] | 1418 | CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 ) |
---|
[1] | 1419 | ENDIF |
---|
| 1420 | dt_3d = dt |
---|
| 1421 | dt_fixed = .TRUE. |
---|
| 1422 | ENDIF |
---|
| 1423 | |
---|
| 1424 | IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN |
---|
| 1425 | IF ( cfl_factor == -1.0 ) THEN |
---|
[1001] | 1426 | IF ( timestep_scheme == 'runge-kutta-2' ) THEN |
---|
[1] | 1427 | cfl_factor = 0.8 |
---|
[1001] | 1428 | ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN |
---|
| 1429 | cfl_factor = 0.9 |
---|
[1] | 1430 | ELSE |
---|
[1001] | 1431 | cfl_factor = 0.9 |
---|
[1] | 1432 | ENDIF |
---|
| 1433 | ELSE |
---|
[215] | 1434 | WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, & |
---|
| 1435 | ' out of range & 0.0 < cfl_factor <= 1.0 is required' |
---|
[226] | 1436 | CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 ) |
---|
[1] | 1437 | ENDIF |
---|
| 1438 | ENDIF |
---|
| 1439 | |
---|
| 1440 | ! |
---|
| 1441 | !-- Store simulated time at begin |
---|
| 1442 | simulated_time_at_begin = simulated_time |
---|
| 1443 | |
---|
| 1444 | ! |
---|
[291] | 1445 | !-- Store reference time for coupled runs and change the coupling flag, |
---|
| 1446 | !-- if ... |
---|
| 1447 | IF ( simulated_time == 0.0 ) THEN |
---|
| 1448 | IF ( coupling_start_time == 0.0 ) THEN |
---|
| 1449 | time_since_reference_point = 0.0 |
---|
| 1450 | ELSEIF ( time_since_reference_point < 0.0 ) THEN |
---|
| 1451 | run_coupled = .FALSE. |
---|
| 1452 | ENDIF |
---|
| 1453 | ENDIF |
---|
| 1454 | |
---|
| 1455 | ! |
---|
[1] | 1456 | !-- Set wind speed in the Galilei-transformed system |
---|
| 1457 | IF ( galilei_transformation ) THEN |
---|
[1053] | 1458 | IF ( use_ug_for_galilei_tr .AND. & |
---|
| 1459 | ug_vertical_gradient_level(1) == 0.0 .AND. & |
---|
| 1460 | ug_vertical_gradient(1) == 0.0 .AND. & |
---|
| 1461 | vg_vertical_gradient_level(1) == 0.0 .AND. & |
---|
| 1462 | vg_vertical_gradient(1) == 0.0 ) THEN |
---|
[866] | 1463 | u_gtrans = ug_surface * 0.6 |
---|
| 1464 | v_gtrans = vg_surface * 0.6 |
---|
[1053] | 1465 | ELSEIF ( use_ug_for_galilei_tr .AND. & |
---|
| 1466 | ( ug_vertical_gradient_level(1) /= 0.0 .OR. & |
---|
| 1467 | ug_vertical_gradient(1) /= 0.0 ) ) THEN |
---|
[215] | 1468 | message_string = 'baroclinicity (ug) not allowed simultaneously' // & |
---|
| 1469 | ' with galilei transformation' |
---|
[226] | 1470 | CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 ) |
---|
[1053] | 1471 | ELSEIF ( use_ug_for_galilei_tr .AND. & |
---|
| 1472 | ( vg_vertical_gradient_level(1) /= 0.0 .OR. & |
---|
| 1473 | vg_vertical_gradient(1) /= 0.0 ) ) THEN |
---|
[215] | 1474 | message_string = 'baroclinicity (vg) not allowed simultaneously' // & |
---|
| 1475 | ' with galilei transformation' |
---|
[226] | 1476 | CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 ) |
---|
[1] | 1477 | ELSE |
---|
[215] | 1478 | message_string = 'variable translation speed used for galilei-' // & |
---|
| 1479 | 'transformation, which may cause & instabilities in stably ' // & |
---|
| 1480 | 'stratified regions' |
---|
[226] | 1481 | CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 ) |
---|
[1] | 1482 | ENDIF |
---|
| 1483 | ENDIF |
---|
| 1484 | |
---|
| 1485 | ! |
---|
| 1486 | !-- In case of using a prandtl-layer, calculated (or prescribed) surface |
---|
| 1487 | !-- fluxes have to be used in the diffusion-terms |
---|
| 1488 | IF ( prandtl_layer ) use_surface_fluxes = .TRUE. |
---|
| 1489 | |
---|
| 1490 | ! |
---|
| 1491 | !-- Check boundary conditions and set internal variables: |
---|
| 1492 | !-- Lateral boundary conditions |
---|
[73] | 1493 | IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. & |
---|
[1159] | 1494 | bc_lr /= 'radiation/dirichlet' ) THEN |
---|
[215] | 1495 | message_string = 'unknown boundary condition: bc_lr = "' // & |
---|
| 1496 | TRIM( bc_lr ) // '"' |
---|
[226] | 1497 | CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 ) |
---|
[1] | 1498 | ENDIF |
---|
[73] | 1499 | IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. & |
---|
[1159] | 1500 | bc_ns /= 'radiation/dirichlet' ) THEN |
---|
[215] | 1501 | message_string = 'unknown boundary condition: bc_ns = "' // & |
---|
| 1502 | TRIM( bc_ns ) // '"' |
---|
[226] | 1503 | CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 ) |
---|
[1] | 1504 | ENDIF |
---|
| 1505 | |
---|
| 1506 | ! |
---|
[366] | 1507 | !-- Internal variables used for speed optimization in if clauses |
---|
[707] | 1508 | IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE. |
---|
| 1509 | IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE. |
---|
| 1510 | IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE. |
---|
| 1511 | IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE. |
---|
| 1512 | IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE. |
---|
| 1513 | IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE. |
---|
[366] | 1514 | |
---|
| 1515 | ! |
---|
[1] | 1516 | !-- Non-cyclic lateral boundaries require the multigrid method and Piascek- |
---|
[667] | 1517 | !-- Willimas or Wicker - Skamarock advection scheme. Several schemes |
---|
| 1518 | !-- and tools do not work with non-cyclic boundary conditions. |
---|
[1] | 1519 | IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN |
---|
| 1520 | IF ( psolver /= 'multigrid' ) THEN |
---|
[215] | 1521 | message_string = 'non-cyclic lateral boundaries do not allow ' // & |
---|
| 1522 | 'psolver = "' // TRIM( psolver ) // '"' |
---|
[226] | 1523 | CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 ) |
---|
[1] | 1524 | ENDIF |
---|
[667] | 1525 | IF ( momentum_advec /= 'pw-scheme' .AND. & |
---|
| 1526 | momentum_advec /= 'ws-scheme') THEN |
---|
[215] | 1527 | message_string = 'non-cyclic lateral boundaries do not allow ' // & |
---|
| 1528 | 'momentum_advec = "' // TRIM( momentum_advec ) // '"' |
---|
[226] | 1529 | CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 ) |
---|
[1] | 1530 | ENDIF |
---|
[667] | 1531 | IF ( scalar_advec /= 'pw-scheme' .AND. & |
---|
| 1532 | scalar_advec /= 'ws-scheme' ) THEN |
---|
[215] | 1533 | message_string = 'non-cyclic lateral boundaries do not allow ' // & |
---|
| 1534 | 'scalar_advec = "' // TRIM( scalar_advec ) // '"' |
---|
[226] | 1535 | CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 ) |
---|
[1] | 1536 | ENDIF |
---|
| 1537 | IF ( galilei_transformation ) THEN |
---|
[215] | 1538 | message_string = 'non-cyclic lateral boundaries do not allow ' // & |
---|
| 1539 | 'galilei_transformation = .T.' |
---|
[226] | 1540 | CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 ) |
---|
[1] | 1541 | ENDIF |
---|
| 1542 | ENDIF |
---|
| 1543 | |
---|
| 1544 | ! |
---|
| 1545 | !-- Bottom boundary condition for the turbulent Kinetic energy |
---|
| 1546 | IF ( bc_e_b == 'neumann' ) THEN |
---|
| 1547 | ibc_e_b = 1 |
---|
| 1548 | ELSEIF ( bc_e_b == '(u*)**2+neumann' ) THEN |
---|
| 1549 | ibc_e_b = 2 |
---|
[1015] | 1550 | IF ( prandtl_layer ) THEN |
---|
| 1551 | message_string = 'adjust mixing length = FALSE and bc_e_b = "' // & |
---|
[215] | 1552 | TRIM( bc_e_b ) // '"' |
---|
[226] | 1553 | CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 ) |
---|
[1] | 1554 | ENDIF |
---|
| 1555 | IF ( .NOT. prandtl_layer ) THEN |
---|
| 1556 | bc_e_b = 'neumann' |
---|
| 1557 | ibc_e_b = 1 |
---|
[215] | 1558 | message_string = 'boundary condition bc_e_b changed to "' // & |
---|
| 1559 | TRIM( bc_e_b ) // '"' |
---|
[226] | 1560 | CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 ) |
---|
[1] | 1561 | ENDIF |
---|
| 1562 | ELSE |
---|
[215] | 1563 | message_string = 'unknown boundary condition: bc_e_b = "' // & |
---|
| 1564 | TRIM( bc_e_b ) // '"' |
---|
[226] | 1565 | CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 ) |
---|
[1] | 1566 | ENDIF |
---|
| 1567 | |
---|
| 1568 | ! |
---|
| 1569 | !-- Boundary conditions for perturbation pressure |
---|
| 1570 | IF ( bc_p_b == 'dirichlet' ) THEN |
---|
| 1571 | ibc_p_b = 0 |
---|
| 1572 | ELSEIF ( bc_p_b == 'neumann' ) THEN |
---|
| 1573 | ibc_p_b = 1 |
---|
| 1574 | ELSE |
---|
[215] | 1575 | message_string = 'unknown boundary condition: bc_p_b = "' // & |
---|
| 1576 | TRIM( bc_p_b ) // '"' |
---|
[226] | 1577 | CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 ) |
---|
[1] | 1578 | ENDIF |
---|
[1111] | 1579 | |
---|
[1] | 1580 | IF ( bc_p_t == 'dirichlet' ) THEN |
---|
| 1581 | ibc_p_t = 0 |
---|
| 1582 | ELSEIF ( bc_p_t == 'neumann' ) THEN |
---|
| 1583 | ibc_p_t = 1 |
---|
| 1584 | ELSE |
---|
[215] | 1585 | message_string = 'unknown boundary condition: bc_p_t = "' // & |
---|
| 1586 | TRIM( bc_p_t ) // '"' |
---|
[226] | 1587 | CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 ) |
---|
[1] | 1588 | ENDIF |
---|
| 1589 | |
---|
| 1590 | ! |
---|
| 1591 | !-- Boundary conditions for potential temperature |
---|
[102] | 1592 | IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN |
---|
| 1593 | ibc_pt_b = 2 |
---|
[1] | 1594 | ELSE |
---|
[102] | 1595 | IF ( bc_pt_b == 'dirichlet' ) THEN |
---|
| 1596 | ibc_pt_b = 0 |
---|
| 1597 | ELSEIF ( bc_pt_b == 'neumann' ) THEN |
---|
| 1598 | ibc_pt_b = 1 |
---|
| 1599 | ELSE |
---|
[215] | 1600 | message_string = 'unknown boundary condition: bc_pt_b = "' // & |
---|
| 1601 | TRIM( bc_pt_b ) // '"' |
---|
[226] | 1602 | CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 ) |
---|
[1] | 1603 | ENDIF |
---|
| 1604 | ENDIF |
---|
[102] | 1605 | |
---|
[1] | 1606 | IF ( bc_pt_t == 'dirichlet' ) THEN |
---|
| 1607 | ibc_pt_t = 0 |
---|
| 1608 | ELSEIF ( bc_pt_t == 'neumann' ) THEN |
---|
| 1609 | ibc_pt_t = 1 |
---|
[19] | 1610 | ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN |
---|
| 1611 | ibc_pt_t = 2 |
---|
[1] | 1612 | ELSE |
---|
[215] | 1613 | message_string = 'unknown boundary condition: bc_pt_t = "' // & |
---|
| 1614 | TRIM( bc_pt_t ) // '"' |
---|
[226] | 1615 | CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 ) |
---|
[1] | 1616 | ENDIF |
---|
| 1617 | |
---|
[1276] | 1618 | IF ( surface_heatflux == 9999999.9 ) THEN |
---|
| 1619 | constant_heatflux = .FALSE. |
---|
| 1620 | IF ( large_scale_forcing ) THEN |
---|
| 1621 | IF ( ibc_pt_b == 0 ) THEN |
---|
| 1622 | constant_heatflux = .FALSE. |
---|
| 1623 | ELSEIF ( ibc_pt_b == 1 ) THEN |
---|
| 1624 | constant_heatflux = .TRUE. |
---|
| 1625 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
| 1626 | surface_heatflux = shf_surf(1) |
---|
| 1627 | ENDIF |
---|
| 1628 | ENDIF |
---|
| 1629 | ENDIF |
---|
[1241] | 1630 | ELSE |
---|
[1276] | 1631 | constant_heatflux = .TRUE. |
---|
[1241] | 1632 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. & |
---|
| 1633 | large_scale_forcing ) THEN |
---|
[1276] | 1634 | surface_heatflux = shf_surf(1) |
---|
[1241] | 1635 | ENDIF |
---|
| 1636 | ENDIF |
---|
| 1637 | |
---|
[20] | 1638 | IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE. |
---|
[940] | 1639 | |
---|
| 1640 | IF ( neutral ) THEN |
---|
| 1641 | |
---|
| 1642 | IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) & |
---|
| 1643 | THEN |
---|
| 1644 | message_string = 'heatflux must not be set for pure neutral flow' |
---|
| 1645 | CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 ) |
---|
| 1646 | ENDIF |
---|
| 1647 | |
---|
| 1648 | IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) & |
---|
| 1649 | THEN |
---|
| 1650 | message_string = 'heatflux must not be set for pure neutral flow' |
---|
| 1651 | CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 ) |
---|
| 1652 | ENDIF |
---|
| 1653 | |
---|
| 1654 | ENDIF |
---|
| 1655 | |
---|
[103] | 1656 | IF ( top_momentumflux_u /= 9999999.9 .AND. & |
---|
| 1657 | top_momentumflux_v /= 9999999.9 ) THEN |
---|
| 1658 | constant_top_momentumflux = .TRUE. |
---|
| 1659 | ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. & |
---|
[215] | 1660 | top_momentumflux_v == 9999999.9 ) ) THEN |
---|
| 1661 | message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // & |
---|
| 1662 | 'must be set' |
---|
[226] | 1663 | CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 ) |
---|
[103] | 1664 | ENDIF |
---|
[1] | 1665 | |
---|
| 1666 | ! |
---|
| 1667 | !-- A given surface temperature implies Dirichlet boundary condition for |
---|
| 1668 | !-- temperature. In this case specification of a constant heat flux is |
---|
| 1669 | !-- forbidden. |
---|
| 1670 | IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. & |
---|
| 1671 | surface_heatflux /= 0.0 ) THEN |
---|
[215] | 1672 | message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //& |
---|
| 1673 | '& is not allowed with constant_heatflux = .TRUE.' |
---|
[226] | 1674 | CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 ) |
---|
[1] | 1675 | ENDIF |
---|
| 1676 | IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN |
---|
[215] | 1677 | WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', & |
---|
| 1678 | 'wed with pt_surface_initial_change (/=0) = ', & |
---|
| 1679 | pt_surface_initial_change |
---|
[226] | 1680 | CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 ) |
---|
[1] | 1681 | ENDIF |
---|
| 1682 | |
---|
| 1683 | ! |
---|
[19] | 1684 | !-- A given temperature at the top implies Dirichlet boundary condition for |
---|
| 1685 | !-- temperature. In this case specification of a constant heat flux is |
---|
| 1686 | !-- forbidden. |
---|
| 1687 | IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. & |
---|
| 1688 | top_heatflux /= 0.0 ) THEN |
---|
[215] | 1689 | message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //& |
---|
| 1690 | '" is not allowed with constant_top_heatflux = .TRUE.' |
---|
[226] | 1691 | CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 ) |
---|
[19] | 1692 | ENDIF |
---|
| 1693 | |
---|
| 1694 | ! |
---|
[95] | 1695 | !-- Boundary conditions for salinity |
---|
| 1696 | IF ( ocean ) THEN |
---|
| 1697 | IF ( bc_sa_t == 'dirichlet' ) THEN |
---|
| 1698 | ibc_sa_t = 0 |
---|
| 1699 | ELSEIF ( bc_sa_t == 'neumann' ) THEN |
---|
| 1700 | ibc_sa_t = 1 |
---|
| 1701 | ELSE |
---|
[215] | 1702 | message_string = 'unknown boundary condition: bc_sa_t = "' // & |
---|
| 1703 | TRIM( bc_sa_t ) // '"' |
---|
[226] | 1704 | CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 ) |
---|
[95] | 1705 | ENDIF |
---|
| 1706 | |
---|
| 1707 | IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE. |
---|
[97] | 1708 | IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN |
---|
[215] | 1709 | message_string = 'boundary condition: bc_sa_t = "' // & |
---|
| 1710 | TRIM( bc_sa_t ) // '" requires to set ' // & |
---|
| 1711 | 'top_salinityflux' |
---|
[226] | 1712 | CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 ) |
---|
[97] | 1713 | ENDIF |
---|
[95] | 1714 | |
---|
| 1715 | ! |
---|
| 1716 | !-- A fixed salinity at the top implies Dirichlet boundary condition for |
---|
| 1717 | !-- salinity. In this case specification of a constant salinity flux is |
---|
| 1718 | !-- forbidden. |
---|
| 1719 | IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. & |
---|
| 1720 | top_salinityflux /= 0.0 ) THEN |
---|
[215] | 1721 | message_string = 'boundary condition: bc_sa_t = "' // & |
---|
| 1722 | TRIM( bc_sa_t ) // '" is not allowed with ' // & |
---|
| 1723 | 'constant_top_salinityflux = .TRUE.' |
---|
[226] | 1724 | CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 ) |
---|
[95] | 1725 | ENDIF |
---|
| 1726 | |
---|
| 1727 | ENDIF |
---|
| 1728 | |
---|
| 1729 | ! |
---|
[75] | 1730 | !-- In case of humidity or passive scalar, set boundary conditions for total |
---|
[1] | 1731 | !-- water content / scalar |
---|
[75] | 1732 | IF ( humidity .OR. passive_scalar ) THEN |
---|
| 1733 | IF ( humidity ) THEN |
---|
[1] | 1734 | sq = 'q' |
---|
| 1735 | ELSE |
---|
| 1736 | sq = 's' |
---|
| 1737 | ENDIF |
---|
| 1738 | IF ( bc_q_b == 'dirichlet' ) THEN |
---|
| 1739 | ibc_q_b = 0 |
---|
| 1740 | ELSEIF ( bc_q_b == 'neumann' ) THEN |
---|
| 1741 | ibc_q_b = 1 |
---|
| 1742 | ELSE |
---|
[215] | 1743 | message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // & |
---|
| 1744 | '_b ="' // TRIM( bc_q_b ) // '"' |
---|
[226] | 1745 | CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 ) |
---|
[1] | 1746 | ENDIF |
---|
| 1747 | IF ( bc_q_t == 'dirichlet' ) THEN |
---|
| 1748 | ibc_q_t = 0 |
---|
| 1749 | ELSEIF ( bc_q_t == 'neumann' ) THEN |
---|
| 1750 | ibc_q_t = 1 |
---|
| 1751 | ELSE |
---|
[215] | 1752 | message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // & |
---|
| 1753 | '_t ="' // TRIM( bc_q_t ) // '"' |
---|
[226] | 1754 | CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 ) |
---|
[1] | 1755 | ENDIF |
---|
| 1756 | |
---|
[1276] | 1757 | IF ( surface_waterflux == 9999999.9 ) THEN |
---|
| 1758 | constant_waterflux = .FALSE. |
---|
| 1759 | IF ( large_scale_forcing ) THEN |
---|
| 1760 | IF ( ibc_q_b == 0 ) THEN |
---|
| 1761 | constant_waterflux = .FALSE. |
---|
| 1762 | ELSEIF ( ibc_q_b == 1 ) THEN |
---|
| 1763 | constant_waterflux = .TRUE. |
---|
| 1764 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
| 1765 | surface_waterflux = qsws_surf(1) |
---|
| 1766 | ENDIF |
---|
| 1767 | ENDIF |
---|
| 1768 | ENDIF |
---|
[1241] | 1769 | ELSE |
---|
[1276] | 1770 | constant_waterflux = .TRUE. |
---|
| 1771 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. & |
---|
| 1772 | large_scale_forcing ) THEN |
---|
| 1773 | surface_waterflux = qsws_surf(1) |
---|
| 1774 | ENDIF |
---|
[1241] | 1775 | ENDIF |
---|
[1] | 1776 | |
---|
| 1777 | ! |
---|
| 1778 | !-- A given surface humidity implies Dirichlet boundary condition for |
---|
[75] | 1779 | !-- humidity. In this case specification of a constant water flux is |
---|
[1] | 1780 | !-- forbidden. |
---|
| 1781 | IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN |
---|
[215] | 1782 | message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // & |
---|
| 1783 | '= "' // TRIM( bc_q_b ) // '" is not allowed wi' // & |
---|
| 1784 | 'th prescribed surface flux' |
---|
[226] | 1785 | CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 ) |
---|
[1] | 1786 | ENDIF |
---|
| 1787 | IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN |
---|
[215] | 1788 | WRITE( message_string, * ) 'a prescribed surface flux is not allo', & |
---|
| 1789 | 'wed with ', sq, '_surface_initial_change (/=0) = ', & |
---|
| 1790 | q_surface_initial_change |
---|
[226] | 1791 | CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 ) |
---|
[1] | 1792 | ENDIF |
---|
[1053] | 1793 | |
---|
[1] | 1794 | ENDIF |
---|
| 1795 | ! |
---|
| 1796 | !-- Boundary conditions for horizontal components of wind speed |
---|
| 1797 | IF ( bc_uv_b == 'dirichlet' ) THEN |
---|
| 1798 | ibc_uv_b = 0 |
---|
| 1799 | ELSEIF ( bc_uv_b == 'neumann' ) THEN |
---|
| 1800 | ibc_uv_b = 1 |
---|
| 1801 | IF ( prandtl_layer ) THEN |
---|
[215] | 1802 | message_string = 'boundary condition: bc_uv_b = "' // & |
---|
| 1803 | TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.' |
---|
[226] | 1804 | CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 ) |
---|
[1] | 1805 | ENDIF |
---|
| 1806 | ELSE |
---|
[215] | 1807 | message_string = 'unknown boundary condition: bc_uv_b = "' // & |
---|
| 1808 | TRIM( bc_uv_b ) // '"' |
---|
[226] | 1809 | CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 ) |
---|
[1] | 1810 | ENDIF |
---|
[667] | 1811 | ! |
---|
| 1812 | !-- In case of coupled simulations u and v at the ground in atmosphere will be |
---|
| 1813 | !-- assigned with the u and v values of the ocean surface |
---|
| 1814 | IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN |
---|
| 1815 | ibc_uv_b = 2 |
---|
| 1816 | ENDIF |
---|
[215] | 1817 | |
---|
[108] | 1818 | IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN |
---|
| 1819 | bc_uv_t = 'neumann' |
---|
[1] | 1820 | ibc_uv_t = 1 |
---|
| 1821 | ELSE |
---|
[132] | 1822 | IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN |
---|
[108] | 1823 | ibc_uv_t = 0 |
---|
[767] | 1824 | IF ( bc_uv_t == 'dirichlet_0' ) THEN |
---|
| 1825 | ! |
---|
| 1826 | !-- Velocities for the initial u,v-profiles are set zero at the top |
---|
| 1827 | !-- in case of dirichlet_0 conditions |
---|
| 1828 | u_init(nzt+1) = 0.0 |
---|
| 1829 | v_init(nzt+1) = 0.0 |
---|
| 1830 | ENDIF |
---|
[108] | 1831 | ELSEIF ( bc_uv_t == 'neumann' ) THEN |
---|
| 1832 | ibc_uv_t = 1 |
---|
| 1833 | ELSE |
---|
[215] | 1834 | message_string = 'unknown boundary condition: bc_uv_t = "' // & |
---|
| 1835 | TRIM( bc_uv_t ) // '"' |
---|
[226] | 1836 | CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 ) |
---|
[1] | 1837 | ENDIF |
---|
| 1838 | ENDIF |
---|
| 1839 | |
---|
| 1840 | ! |
---|
| 1841 | !-- Compute and check, respectively, the Rayleigh Damping parameter |
---|
| 1842 | IF ( rayleigh_damping_factor == -1.0 ) THEN |
---|
[1001] | 1843 | rayleigh_damping_factor = 0.0 |
---|
[1] | 1844 | ELSE |
---|
| 1845 | IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) & |
---|
| 1846 | THEN |
---|
[215] | 1847 | WRITE( message_string, * ) 'rayleigh_damping_factor = ', & |
---|
| 1848 | rayleigh_damping_factor, ' out of range [0.0,1.0]' |
---|
[226] | 1849 | CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 ) |
---|
[1] | 1850 | ENDIF |
---|
| 1851 | ENDIF |
---|
| 1852 | |
---|
| 1853 | IF ( rayleigh_damping_height == -1.0 ) THEN |
---|
[108] | 1854 | IF ( .NOT. ocean ) THEN |
---|
| 1855 | rayleigh_damping_height = 0.66666666666 * zu(nzt) |
---|
| 1856 | ELSE |
---|
| 1857 | rayleigh_damping_height = 0.66666666666 * zu(nzb) |
---|
| 1858 | ENDIF |
---|
[1] | 1859 | ELSE |
---|
[108] | 1860 | IF ( .NOT. ocean ) THEN |
---|
| 1861 | IF ( rayleigh_damping_height < 0.0 .OR. & |
---|
| 1862 | rayleigh_damping_height > zu(nzt) ) THEN |
---|
[215] | 1863 | WRITE( message_string, * ) 'rayleigh_damping_height = ', & |
---|
| 1864 | rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']' |
---|
[226] | 1865 | CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 ) |
---|
[1] | 1866 | ENDIF |
---|
[108] | 1867 | ELSE |
---|
| 1868 | IF ( rayleigh_damping_height > 0.0 .OR. & |
---|
| 1869 | rayleigh_damping_height < zu(nzb) ) THEN |
---|
[215] | 1870 | WRITE( message_string, * ) 'rayleigh_damping_height = ', & |
---|
| 1871 | rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']' |
---|
[226] | 1872 | CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 ) |
---|
[108] | 1873 | ENDIF |
---|
[1] | 1874 | ENDIF |
---|
| 1875 | ENDIF |
---|
| 1876 | |
---|
| 1877 | ! |
---|
| 1878 | !-- Check number of chosen statistic regions. More than 10 regions are not |
---|
| 1879 | !-- allowed, because so far no more than 10 corresponding output files can |
---|
| 1880 | !-- be opened (cf. check_open) |
---|
| 1881 | IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN |
---|
[215] | 1882 | WRITE ( message_string, * ) 'number of statistic_regions = ', & |
---|
| 1883 | statistic_regions+1, ' but only 10 regions are allowed' |
---|
[226] | 1884 | CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 ) |
---|
[1] | 1885 | ENDIF |
---|
| 1886 | IF ( normalizing_region > statistic_regions .OR. & |
---|
| 1887 | normalizing_region < 0) THEN |
---|
[215] | 1888 | WRITE ( message_string, * ) 'normalizing_region = ', & |
---|
| 1889 | normalizing_region, ' must be >= 0 and <= ',statistic_regions, & |
---|
| 1890 | ' (value of statistic_regions)' |
---|
[226] | 1891 | CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 ) |
---|
[1] | 1892 | ENDIF |
---|
| 1893 | |
---|
| 1894 | ! |
---|
[116] | 1895 | !-- Check the interval for sorting particles. |
---|
| 1896 | !-- Using particles as cloud droplets requires sorting after each timestep. |
---|
| 1897 | IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN |
---|
| 1898 | dt_sort_particles = 0.0 |
---|
[215] | 1899 | message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //& |
---|
| 1900 | '_droplets = .TRUE.' |
---|
[226] | 1901 | CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 ) |
---|
[116] | 1902 | ENDIF |
---|
| 1903 | |
---|
| 1904 | ! |
---|
[1] | 1905 | !-- Set the default intervals for data output, if necessary |
---|
| 1906 | !-- NOTE: dt_dosp has already been set in package_parin |
---|
| 1907 | IF ( dt_data_output /= 9999999.9 ) THEN |
---|
| 1908 | IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output |
---|
| 1909 | IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output |
---|
| 1910 | IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output |
---|
| 1911 | IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output |
---|
| 1912 | IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output |
---|
| 1913 | IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output |
---|
| 1914 | IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output |
---|
[564] | 1915 | DO mid = 1, max_masks |
---|
[410] | 1916 | IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output |
---|
| 1917 | ENDDO |
---|
[1] | 1918 | ENDIF |
---|
| 1919 | |
---|
| 1920 | ! |
---|
| 1921 | !-- Set the default skip time intervals for data output, if necessary |
---|
| 1922 | IF ( skip_time_dopr == 9999999.9 ) & |
---|
| 1923 | skip_time_dopr = skip_time_data_output |
---|
| 1924 | IF ( skip_time_dosp == 9999999.9 ) & |
---|
| 1925 | skip_time_dosp = skip_time_data_output |
---|
| 1926 | IF ( skip_time_do2d_xy == 9999999.9 ) & |
---|
| 1927 | skip_time_do2d_xy = skip_time_data_output |
---|
| 1928 | IF ( skip_time_do2d_xz == 9999999.9 ) & |
---|
| 1929 | skip_time_do2d_xz = skip_time_data_output |
---|
| 1930 | IF ( skip_time_do2d_yz == 9999999.9 ) & |
---|
| 1931 | skip_time_do2d_yz = skip_time_data_output |
---|
| 1932 | IF ( skip_time_do3d == 9999999.9 ) & |
---|
| 1933 | skip_time_do3d = skip_time_data_output |
---|
| 1934 | IF ( skip_time_data_output_av == 9999999.9 ) & |
---|
| 1935 | skip_time_data_output_av = skip_time_data_output |
---|
[564] | 1936 | DO mid = 1, max_masks |
---|
[410] | 1937 | IF ( skip_time_domask(mid) == 9999999.9 ) & |
---|
| 1938 | skip_time_domask(mid) = skip_time_data_output |
---|
| 1939 | ENDDO |
---|
[1] | 1940 | |
---|
| 1941 | ! |
---|
| 1942 | !-- Check the average intervals (first for 3d-data, then for profiles and |
---|
| 1943 | !-- spectra) |
---|
| 1944 | IF ( averaging_interval > dt_data_output_av ) THEN |
---|
[215] | 1945 | WRITE( message_string, * ) 'averaging_interval = ', & |
---|
| 1946 | averaging_interval, ' must be <= dt_data_output = ', dt_data_output |
---|
[226] | 1947 | CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 ) |
---|
[1] | 1948 | ENDIF |
---|
| 1949 | |
---|
| 1950 | IF ( averaging_interval_pr == 9999999.9 ) THEN |
---|
| 1951 | averaging_interval_pr = averaging_interval |
---|
| 1952 | ENDIF |
---|
| 1953 | |
---|
| 1954 | IF ( averaging_interval_pr > dt_dopr ) THEN |
---|
[215] | 1955 | WRITE( message_string, * ) 'averaging_interval_pr = ', & |
---|
| 1956 | averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr |
---|
[226] | 1957 | CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 ) |
---|
[1] | 1958 | ENDIF |
---|
| 1959 | |
---|
| 1960 | IF ( averaging_interval_sp == 9999999.9 ) THEN |
---|
| 1961 | averaging_interval_sp = averaging_interval |
---|
| 1962 | ENDIF |
---|
| 1963 | |
---|
| 1964 | IF ( averaging_interval_sp > dt_dosp ) THEN |
---|
[215] | 1965 | WRITE( message_string, * ) 'averaging_interval_sp = ', & |
---|
| 1966 | averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp |
---|
[226] | 1967 | CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 ) |
---|
[1] | 1968 | ENDIF |
---|
| 1969 | |
---|
| 1970 | ! |
---|
| 1971 | !-- Set the default interval for profiles entering the temporal average |
---|
| 1972 | IF ( dt_averaging_input_pr == 9999999.9 ) THEN |
---|
| 1973 | dt_averaging_input_pr = dt_averaging_input |
---|
| 1974 | ENDIF |
---|
| 1975 | |
---|
| 1976 | ! |
---|
| 1977 | !-- Set the default interval for the output of timeseries to a reasonable |
---|
| 1978 | !-- value (tries to minimize the number of calls of flow_statistics) |
---|
| 1979 | IF ( dt_dots == 9999999.9 ) THEN |
---|
| 1980 | IF ( averaging_interval_pr == 0.0 ) THEN |
---|
| 1981 | dt_dots = MIN( dt_run_control, dt_dopr ) |
---|
| 1982 | ELSE |
---|
| 1983 | dt_dots = MIN( dt_run_control, dt_averaging_input_pr ) |
---|
| 1984 | ENDIF |
---|
| 1985 | ENDIF |
---|
| 1986 | |
---|
| 1987 | ! |
---|
| 1988 | !-- Check the sample rate for averaging (first for 3d-data, then for profiles) |
---|
| 1989 | IF ( dt_averaging_input > averaging_interval ) THEN |
---|
[215] | 1990 | WRITE( message_string, * ) 'dt_averaging_input = ', & |
---|
| 1991 | dt_averaging_input, ' must be <= averaging_interval = ', & |
---|
| 1992 | averaging_interval |
---|
[226] | 1993 | CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 ) |
---|
[1] | 1994 | ENDIF |
---|
| 1995 | |
---|
| 1996 | IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN |
---|
[215] | 1997 | WRITE( message_string, * ) 'dt_averaging_input_pr = ', & |
---|
| 1998 | dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', & |
---|
| 1999 | averaging_interval_pr |
---|
[226] | 2000 | CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 ) |
---|
[1] | 2001 | ENDIF |
---|
| 2002 | |
---|
| 2003 | ! |
---|
[72] | 2004 | !-- Set the default value for the integration interval of precipitation amount |
---|
| 2005 | IF ( precipitation ) THEN |
---|
| 2006 | IF ( precipitation_amount_interval == 9999999.9 ) THEN |
---|
| 2007 | precipitation_amount_interval = dt_do2d_xy |
---|
| 2008 | ELSE |
---|
| 2009 | IF ( precipitation_amount_interval > dt_do2d_xy ) THEN |
---|
[215] | 2010 | WRITE( message_string, * ) 'precipitation_amount_interval = ', & |
---|
| 2011 | precipitation_amount_interval, ' must not be larger than ', & |
---|
| 2012 | 'dt_do2d_xy = ', dt_do2d_xy |
---|
[226] | 2013 | CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 ) |
---|
[72] | 2014 | ENDIF |
---|
| 2015 | ENDIF |
---|
| 2016 | ENDIF |
---|
| 2017 | |
---|
| 2018 | ! |
---|
[1] | 2019 | !-- Determine the number of output profiles and check whether they are |
---|
| 2020 | !-- permissible |
---|
| 2021 | DO WHILE ( data_output_pr(dopr_n+1) /= ' ' ) |
---|
| 2022 | |
---|
| 2023 | dopr_n = dopr_n + 1 |
---|
| 2024 | i = dopr_n |
---|
| 2025 | |
---|
| 2026 | ! |
---|
| 2027 | !-- Determine internal profile number (for hom, homs) |
---|
| 2028 | !-- and store height levels |
---|
| 2029 | SELECT CASE ( TRIM( data_output_pr(i) ) ) |
---|
| 2030 | |
---|
| 2031 | CASE ( 'u', '#u' ) |
---|
| 2032 | dopr_index(i) = 1 |
---|
[87] | 2033 | dopr_unit(i) = 'm/s' |
---|
[1] | 2034 | hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2035 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2036 | dopr_initial_index(i) = 5 |
---|
| 2037 | hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2038 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2039 | ENDIF |
---|
| 2040 | |
---|
| 2041 | CASE ( 'v', '#v' ) |
---|
| 2042 | dopr_index(i) = 2 |
---|
[87] | 2043 | dopr_unit(i) = 'm/s' |
---|
| 2044 | hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2045 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2046 | dopr_initial_index(i) = 6 |
---|
| 2047 | hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2048 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2049 | ENDIF |
---|
| 2050 | |
---|
| 2051 | CASE ( 'w' ) |
---|
| 2052 | dopr_index(i) = 3 |
---|
[87] | 2053 | dopr_unit(i) = 'm/s' |
---|
| 2054 | hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
[1] | 2055 | |
---|
| 2056 | CASE ( 'pt', '#pt' ) |
---|
| 2057 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2058 | dopr_index(i) = 4 |
---|
[87] | 2059 | dopr_unit(i) = 'K' |
---|
[1] | 2060 | hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2061 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2062 | dopr_initial_index(i) = 7 |
---|
| 2063 | hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[87] | 2064 | hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative |
---|
[1] | 2065 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2066 | ENDIF |
---|
| 2067 | ELSE |
---|
| 2068 | dopr_index(i) = 43 |
---|
[87] | 2069 | dopr_unit(i) = 'K' |
---|
[1] | 2070 | hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2071 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2072 | dopr_initial_index(i) = 28 |
---|
| 2073 | hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[87] | 2074 | hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative |
---|
[1] | 2075 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2076 | ENDIF |
---|
| 2077 | ENDIF |
---|
| 2078 | |
---|
| 2079 | CASE ( 'e' ) |
---|
| 2080 | dopr_index(i) = 8 |
---|
[87] | 2081 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2082 | hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2083 | hom(nzb,2,8,:) = 0.0 |
---|
| 2084 | |
---|
| 2085 | CASE ( 'km', '#km' ) |
---|
| 2086 | dopr_index(i) = 9 |
---|
[87] | 2087 | dopr_unit(i) = 'm2/s' |
---|
[1] | 2088 | hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2089 | hom(nzb,2,9,:) = 0.0 |
---|
| 2090 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2091 | dopr_initial_index(i) = 23 |
---|
| 2092 | hom(:,2,23,:) = hom(:,2,9,:) |
---|
| 2093 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2094 | ENDIF |
---|
| 2095 | |
---|
| 2096 | CASE ( 'kh', '#kh' ) |
---|
| 2097 | dopr_index(i) = 10 |
---|
[87] | 2098 | dopr_unit(i) = 'm2/s' |
---|
[1] | 2099 | hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2100 | hom(nzb,2,10,:) = 0.0 |
---|
| 2101 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2102 | dopr_initial_index(i) = 24 |
---|
| 2103 | hom(:,2,24,:) = hom(:,2,10,:) |
---|
| 2104 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2105 | ENDIF |
---|
| 2106 | |
---|
| 2107 | CASE ( 'l', '#l' ) |
---|
| 2108 | dopr_index(i) = 11 |
---|
[87] | 2109 | dopr_unit(i) = 'm' |
---|
[1] | 2110 | hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2111 | hom(nzb,2,11,:) = 0.0 |
---|
| 2112 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2113 | dopr_initial_index(i) = 25 |
---|
| 2114 | hom(:,2,25,:) = hom(:,2,11,:) |
---|
| 2115 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2116 | ENDIF |
---|
| 2117 | |
---|
| 2118 | CASE ( 'w"u"' ) |
---|
| 2119 | dopr_index(i) = 12 |
---|
[87] | 2120 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2121 | hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2122 | IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1) |
---|
| 2123 | |
---|
| 2124 | CASE ( 'w*u*' ) |
---|
| 2125 | dopr_index(i) = 13 |
---|
[87] | 2126 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2127 | hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2128 | |
---|
| 2129 | CASE ( 'w"v"' ) |
---|
| 2130 | dopr_index(i) = 14 |
---|
[87] | 2131 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2132 | hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2133 | IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1) |
---|
| 2134 | |
---|
| 2135 | CASE ( 'w*v*' ) |
---|
| 2136 | dopr_index(i) = 15 |
---|
[87] | 2137 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2138 | hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2139 | |
---|
| 2140 | CASE ( 'w"pt"' ) |
---|
| 2141 | dopr_index(i) = 16 |
---|
[87] | 2142 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2143 | hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2144 | |
---|
| 2145 | CASE ( 'w*pt*' ) |
---|
| 2146 | dopr_index(i) = 17 |
---|
[87] | 2147 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2148 | hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2149 | |
---|
| 2150 | CASE ( 'wpt' ) |
---|
| 2151 | dopr_index(i) = 18 |
---|
[87] | 2152 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2153 | hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2154 | |
---|
| 2155 | CASE ( 'wu' ) |
---|
| 2156 | dopr_index(i) = 19 |
---|
[87] | 2157 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2158 | hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2159 | IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1) |
---|
| 2160 | |
---|
| 2161 | CASE ( 'wv' ) |
---|
| 2162 | dopr_index(i) = 20 |
---|
[87] | 2163 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2164 | hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2165 | IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1) |
---|
| 2166 | |
---|
| 2167 | CASE ( 'w*pt*BC' ) |
---|
| 2168 | dopr_index(i) = 21 |
---|
[87] | 2169 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2170 | hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2171 | |
---|
| 2172 | CASE ( 'wptBC' ) |
---|
| 2173 | dopr_index(i) = 22 |
---|
[87] | 2174 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2175 | hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2176 | |
---|
[96] | 2177 | CASE ( 'sa', '#sa' ) |
---|
| 2178 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2179 | message_string = 'data_output_pr = ' // & |
---|
| 2180 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2181 | 'lemented for ocean = .FALSE.' |
---|
[226] | 2182 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
[96] | 2183 | ELSE |
---|
| 2184 | dopr_index(i) = 23 |
---|
| 2185 | dopr_unit(i) = 'psu' |
---|
| 2186 | hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2187 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2188 | dopr_initial_index(i) = 26 |
---|
| 2189 | hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2190 | hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2191 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2192 | ENDIF |
---|
| 2193 | ENDIF |
---|
| 2194 | |
---|
[1] | 2195 | CASE ( 'u*2' ) |
---|
| 2196 | dopr_index(i) = 30 |
---|
[87] | 2197 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2198 | hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2199 | |
---|
| 2200 | CASE ( 'v*2' ) |
---|
| 2201 | dopr_index(i) = 31 |
---|
[87] | 2202 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2203 | hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2204 | |
---|
| 2205 | CASE ( 'w*2' ) |
---|
| 2206 | dopr_index(i) = 32 |
---|
[87] | 2207 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2208 | hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2209 | |
---|
| 2210 | CASE ( 'pt*2' ) |
---|
| 2211 | dopr_index(i) = 33 |
---|
[87] | 2212 | dopr_unit(i) = 'K2' |
---|
[1] | 2213 | hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2214 | |
---|
| 2215 | CASE ( 'e*' ) |
---|
| 2216 | dopr_index(i) = 34 |
---|
[87] | 2217 | dopr_unit(i) = 'm2/s2' |
---|
[1] | 2218 | hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2219 | |
---|
| 2220 | CASE ( 'w*2pt*' ) |
---|
| 2221 | dopr_index(i) = 35 |
---|
[87] | 2222 | dopr_unit(i) = 'K m2/s2' |
---|
[1] | 2223 | hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2224 | |
---|
| 2225 | CASE ( 'w*pt*2' ) |
---|
| 2226 | dopr_index(i) = 36 |
---|
[87] | 2227 | dopr_unit(i) = 'K2 m/s' |
---|
[1] | 2228 | hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2229 | |
---|
| 2230 | CASE ( 'w*e*' ) |
---|
| 2231 | dopr_index(i) = 37 |
---|
[87] | 2232 | dopr_unit(i) = 'm3/s3' |
---|
[1] | 2233 | hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2234 | |
---|
| 2235 | CASE ( 'w*3' ) |
---|
| 2236 | dopr_index(i) = 38 |
---|
[87] | 2237 | dopr_unit(i) = 'm3/s3' |
---|
[1] | 2238 | hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2239 | |
---|
| 2240 | CASE ( 'Sw' ) |
---|
| 2241 | dopr_index(i) = 39 |
---|
[89] | 2242 | dopr_unit(i) = 'none' |
---|
[1] | 2243 | hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2244 | |
---|
[232] | 2245 | CASE ( 'p' ) |
---|
| 2246 | dopr_index(i) = 40 |
---|
| 2247 | dopr_unit(i) = 'Pa' |
---|
| 2248 | hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2249 | |
---|
[1] | 2250 | CASE ( 'q', '#q' ) |
---|
[108] | 2251 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2252 | message_string = 'data_output_pr = ' // & |
---|
| 2253 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2254 | 'lemented for humidity = .FALSE.' |
---|
[226] | 2255 | CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 ) |
---|
[1] | 2256 | ELSE |
---|
| 2257 | dopr_index(i) = 41 |
---|
[87] | 2258 | dopr_unit(i) = 'kg/kg' |
---|
| 2259 | hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2260 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2261 | dopr_initial_index(i) = 26 |
---|
| 2262 | hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2263 | hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2264 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2265 | ENDIF |
---|
| 2266 | ENDIF |
---|
| 2267 | |
---|
| 2268 | CASE ( 's', '#s' ) |
---|
| 2269 | IF ( .NOT. passive_scalar ) THEN |
---|
[215] | 2270 | message_string = 'data_output_pr = ' // & |
---|
| 2271 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2272 | 'lemented for passive_scalar = .FALSE.' |
---|
[226] | 2273 | CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 ) |
---|
[1] | 2274 | ELSE |
---|
| 2275 | dopr_index(i) = 41 |
---|
[87] | 2276 | dopr_unit(i) = 'kg/m3' |
---|
| 2277 | hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2278 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2279 | dopr_initial_index(i) = 26 |
---|
| 2280 | hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2281 | hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2282 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2283 | ENDIF |
---|
| 2284 | ENDIF |
---|
| 2285 | |
---|
| 2286 | CASE ( 'qv', '#qv' ) |
---|
| 2287 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2288 | dopr_index(i) = 41 |
---|
[87] | 2289 | dopr_unit(i) = 'kg/kg' |
---|
| 2290 | hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2291 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2292 | dopr_initial_index(i) = 26 |
---|
| 2293 | hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2294 | hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2295 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2296 | ENDIF |
---|
| 2297 | ELSE |
---|
| 2298 | dopr_index(i) = 42 |
---|
[87] | 2299 | dopr_unit(i) = 'kg/kg' |
---|
| 2300 | hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2301 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2302 | dopr_initial_index(i) = 27 |
---|
| 2303 | hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2304 | hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2305 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2306 | ENDIF |
---|
| 2307 | ENDIF |
---|
| 2308 | |
---|
| 2309 | CASE ( 'lpt', '#lpt' ) |
---|
| 2310 | IF ( .NOT. cloud_physics ) THEN |
---|
[215] | 2311 | message_string = 'data_output_pr = ' // & |
---|
| 2312 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2313 | 'lemented for cloud_physics = .FALSE.' |
---|
[226] | 2314 | CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 ) |
---|
[1] | 2315 | ELSE |
---|
| 2316 | dopr_index(i) = 4 |
---|
[87] | 2317 | dopr_unit(i) = 'K' |
---|
[1] | 2318 | hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2319 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2320 | dopr_initial_index(i) = 7 |
---|
| 2321 | hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2322 | hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2323 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2324 | ENDIF |
---|
| 2325 | ENDIF |
---|
| 2326 | |
---|
| 2327 | CASE ( 'vpt', '#vpt' ) |
---|
| 2328 | dopr_index(i) = 44 |
---|
[87] | 2329 | dopr_unit(i) = 'K' |
---|
| 2330 | hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1] | 2331 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2332 | dopr_initial_index(i) = 29 |
---|
| 2333 | hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2334 | hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist |
---|
| 2335 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2336 | ENDIF |
---|
| 2337 | |
---|
| 2338 | CASE ( 'w"vpt"' ) |
---|
| 2339 | dopr_index(i) = 45 |
---|
[87] | 2340 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2341 | hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2342 | |
---|
| 2343 | CASE ( 'w*vpt*' ) |
---|
| 2344 | dopr_index(i) = 46 |
---|
[87] | 2345 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2346 | hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2347 | |
---|
| 2348 | CASE ( 'wvpt' ) |
---|
| 2349 | dopr_index(i) = 47 |
---|
[87] | 2350 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2351 | hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2352 | |
---|
| 2353 | CASE ( 'w"q"' ) |
---|
[108] | 2354 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2355 | message_string = 'data_output_pr = ' // & |
---|
| 2356 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2357 | 'lemented for humidity = .FALSE.' |
---|
[226] | 2358 | CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 ) |
---|
[1] | 2359 | ELSE |
---|
| 2360 | dopr_index(i) = 48 |
---|
[87] | 2361 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2362 | hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2363 | ENDIF |
---|
| 2364 | |
---|
| 2365 | CASE ( 'w*q*' ) |
---|
[108] | 2366 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2367 | message_string = 'data_output_pr = ' // & |
---|
| 2368 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2369 | 'lemented for humidity = .FALSE.' |
---|
[226] | 2370 | CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 ) |
---|
[1] | 2371 | ELSE |
---|
| 2372 | dopr_index(i) = 49 |
---|
[87] | 2373 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2374 | hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2375 | ENDIF |
---|
| 2376 | |
---|
| 2377 | CASE ( 'wq' ) |
---|
[108] | 2378 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2379 | message_string = 'data_output_pr = ' // & |
---|
| 2380 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2381 | 'lemented for humidity = .FALSE.' |
---|
[226] | 2382 | CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 ) |
---|
[1] | 2383 | ELSE |
---|
| 2384 | dopr_index(i) = 50 |
---|
[87] | 2385 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2386 | hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2387 | ENDIF |
---|
| 2388 | |
---|
| 2389 | CASE ( 'w"s"' ) |
---|
| 2390 | IF ( .NOT. passive_scalar ) THEN |
---|
[215] | 2391 | message_string = 'data_output_pr = ' // & |
---|
| 2392 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2393 | 'lemented for passive_scalar = .FALSE.' |
---|
[226] | 2394 | CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 ) |
---|
[1] | 2395 | ELSE |
---|
| 2396 | dopr_index(i) = 48 |
---|
[87] | 2397 | dopr_unit(i) = 'kg/m3 m/s' |
---|
[1] | 2398 | hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2399 | ENDIF |
---|
| 2400 | |
---|
| 2401 | CASE ( 'w*s*' ) |
---|
| 2402 | IF ( .NOT. passive_scalar ) THEN |
---|
[215] | 2403 | message_string = 'data_output_pr = ' // & |
---|
| 2404 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2405 | 'lemented for passive_scalar = .FALSE.' |
---|
[226] | 2406 | CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 ) |
---|
[1] | 2407 | ELSE |
---|
| 2408 | dopr_index(i) = 49 |
---|
[87] | 2409 | dopr_unit(i) = 'kg/m3 m/s' |
---|
[1] | 2410 | hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2411 | ENDIF |
---|
| 2412 | |
---|
| 2413 | CASE ( 'ws' ) |
---|
| 2414 | IF ( .NOT. passive_scalar ) THEN |
---|
[215] | 2415 | message_string = 'data_output_pr = ' // & |
---|
| 2416 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2417 | 'lemented for passive_scalar = .FALSE.' |
---|
[226] | 2418 | CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 ) |
---|
[1] | 2419 | ELSE |
---|
| 2420 | dopr_index(i) = 50 |
---|
[87] | 2421 | dopr_unit(i) = 'kg/m3 m/s' |
---|
[1] | 2422 | hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2423 | ENDIF |
---|
| 2424 | |
---|
| 2425 | CASE ( 'w"qv"' ) |
---|
[75] | 2426 | IF ( humidity .AND. .NOT. cloud_physics ) & |
---|
[1] | 2427 | THEN |
---|
| 2428 | dopr_index(i) = 48 |
---|
[87] | 2429 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2430 | hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
[75] | 2431 | ELSEIF( humidity .AND. cloud_physics ) THEN |
---|
[1] | 2432 | dopr_index(i) = 51 |
---|
[87] | 2433 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2434 | hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2435 | ELSE |
---|
[215] | 2436 | message_string = 'data_output_pr = ' // & |
---|
| 2437 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2438 | 'lemented for cloud_physics = .FALSE. an&' // & |
---|
| 2439 | 'd humidity = .FALSE.' |
---|
[226] | 2440 | CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 ) |
---|
[1] | 2441 | ENDIF |
---|
| 2442 | |
---|
| 2443 | CASE ( 'w*qv*' ) |
---|
[75] | 2444 | IF ( humidity .AND. .NOT. cloud_physics ) & |
---|
[1] | 2445 | THEN |
---|
| 2446 | dopr_index(i) = 49 |
---|
[87] | 2447 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2448 | hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
[75] | 2449 | ELSEIF( humidity .AND. cloud_physics ) THEN |
---|
[1] | 2450 | dopr_index(i) = 52 |
---|
[87] | 2451 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2452 | hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2453 | ELSE |
---|
[215] | 2454 | message_string = 'data_output_pr = ' // & |
---|
| 2455 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2456 | 'lemented for cloud_physics = .FALSE. an&' // & |
---|
| 2457 | 'd humidity = .FALSE.' |
---|
[226] | 2458 | CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 ) |
---|
[1] | 2459 | ENDIF |
---|
| 2460 | |
---|
| 2461 | CASE ( 'wqv' ) |
---|
[75] | 2462 | IF ( humidity .AND. .NOT. cloud_physics ) & |
---|
[1] | 2463 | THEN |
---|
| 2464 | dopr_index(i) = 50 |
---|
[87] | 2465 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2466 | hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
[75] | 2467 | ELSEIF( humidity .AND. cloud_physics ) THEN |
---|
[1] | 2468 | dopr_index(i) = 53 |
---|
[87] | 2469 | dopr_unit(i) = 'kg/kg m/s' |
---|
[1] | 2470 | hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2471 | ELSE |
---|
[215] | 2472 | message_string = 'data_output_pr = ' // & |
---|
| 2473 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2474 | 'lemented for cloud_physics = .FALSE. an&' // & |
---|
| 2475 | 'd humidity = .FALSE.' |
---|
[226] | 2476 | CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 ) |
---|
[1] | 2477 | ENDIF |
---|
| 2478 | |
---|
| 2479 | CASE ( 'ql' ) |
---|
| 2480 | IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN |
---|
[215] | 2481 | message_string = 'data_output_pr = ' // & |
---|
| 2482 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2483 | 'lemented for cloud_physics = .FALSE. or' // & |
---|
| 2484 | '&cloud_droplets = .FALSE.' |
---|
[226] | 2485 | CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 ) |
---|
[1] | 2486 | ELSE |
---|
| 2487 | dopr_index(i) = 54 |
---|
[87] | 2488 | dopr_unit(i) = 'kg/kg' |
---|
[1] | 2489 | hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2490 | ENDIF |
---|
| 2491 | |
---|
[524] | 2492 | CASE ( 'w*u*u*:dz' ) |
---|
[1] | 2493 | dopr_index(i) = 55 |
---|
[87] | 2494 | dopr_unit(i) = 'm2/s3' |
---|
[1] | 2495 | hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2496 | |
---|
[524] | 2497 | CASE ( 'w*p*:dz' ) |
---|
[1] | 2498 | dopr_index(i) = 56 |
---|
[87] | 2499 | dopr_unit(i) = 'm2/s3' |
---|
[106] | 2500 | hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
[1] | 2501 | |
---|
[524] | 2502 | CASE ( 'w"e:dz' ) |
---|
[1] | 2503 | dopr_index(i) = 57 |
---|
[87] | 2504 | dopr_unit(i) = 'm2/s3' |
---|
[1] | 2505 | hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2506 | |
---|
[667] | 2507 | |
---|
[1] | 2508 | CASE ( 'u"pt"' ) |
---|
| 2509 | dopr_index(i) = 58 |
---|
[87] | 2510 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2511 | hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2512 | |
---|
| 2513 | CASE ( 'u*pt*' ) |
---|
| 2514 | dopr_index(i) = 59 |
---|
[87] | 2515 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2516 | hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2517 | |
---|
| 2518 | CASE ( 'upt_t' ) |
---|
| 2519 | dopr_index(i) = 60 |
---|
[87] | 2520 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2521 | hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2522 | |
---|
| 2523 | CASE ( 'v"pt"' ) |
---|
| 2524 | dopr_index(i) = 61 |
---|
[87] | 2525 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2526 | hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2527 | |
---|
| 2528 | CASE ( 'v*pt*' ) |
---|
| 2529 | dopr_index(i) = 62 |
---|
[87] | 2530 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2531 | hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2532 | |
---|
| 2533 | CASE ( 'vpt_t' ) |
---|
| 2534 | dopr_index(i) = 63 |
---|
[87] | 2535 | dopr_unit(i) = 'K m/s' |
---|
[1] | 2536 | hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2537 | |
---|
[96] | 2538 | CASE ( 'rho' ) |
---|
[388] | 2539 | IF ( .NOT. ocean ) THEN |
---|
| 2540 | message_string = 'data_output_pr = ' // & |
---|
| 2541 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2542 | 'lemented for ocean = .FALSE.' |
---|
| 2543 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
| 2544 | ELSE |
---|
| 2545 | dopr_index(i) = 64 |
---|
| 2546 | dopr_unit(i) = 'kg/m3' |
---|
| 2547 | hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[1179] | 2548 | IF ( data_output_pr(i)(1:1) == '#' ) THEN |
---|
| 2549 | dopr_initial_index(i) = 77 |
---|
| 2550 | hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2551 | hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative |
---|
| 2552 | data_output_pr(i) = data_output_pr(i)(2:) |
---|
| 2553 | ENDIF |
---|
[388] | 2554 | ENDIF |
---|
[1] | 2555 | |
---|
[96] | 2556 | CASE ( 'w"sa"' ) |
---|
| 2557 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2558 | message_string = 'data_output_pr = ' // & |
---|
| 2559 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2560 | 'lemented for ocean = .FALSE.' |
---|
[226] | 2561 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
[96] | 2562 | ELSE |
---|
| 2563 | dopr_index(i) = 65 |
---|
| 2564 | dopr_unit(i) = 'psu m/s' |
---|
| 2565 | hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2566 | ENDIF |
---|
| 2567 | |
---|
| 2568 | CASE ( 'w*sa*' ) |
---|
| 2569 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2570 | message_string = 'data_output_pr = ' // & |
---|
| 2571 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2572 | 'lemented for ocean = .FALSE.' |
---|
[226] | 2573 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
[96] | 2574 | ELSE |
---|
| 2575 | dopr_index(i) = 66 |
---|
| 2576 | dopr_unit(i) = 'psu m/s' |
---|
| 2577 | hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2578 | ENDIF |
---|
| 2579 | |
---|
| 2580 | CASE ( 'wsa' ) |
---|
| 2581 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2582 | message_string = 'data_output_pr = ' // & |
---|
| 2583 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2584 | 'lemented for ocean = .FALSE.' |
---|
[226] | 2585 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
[96] | 2586 | ELSE |
---|
| 2587 | dopr_index(i) = 67 |
---|
| 2588 | dopr_unit(i) = 'psu m/s' |
---|
| 2589 | hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 ) |
---|
| 2590 | ENDIF |
---|
| 2591 | |
---|
[106] | 2592 | CASE ( 'w*p*' ) |
---|
| 2593 | dopr_index(i) = 68 |
---|
| 2594 | dopr_unit(i) = 'm3/s3' |
---|
| 2595 | hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
[96] | 2596 | |
---|
[106] | 2597 | CASE ( 'w"e' ) |
---|
| 2598 | dopr_index(i) = 69 |
---|
| 2599 | dopr_unit(i) = 'm3/s3' |
---|
| 2600 | hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2601 | |
---|
[197] | 2602 | CASE ( 'q*2' ) |
---|
| 2603 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2604 | message_string = 'data_output_pr = ' // & |
---|
| 2605 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2606 | 'lemented for humidity = .FALSE.' |
---|
[226] | 2607 | CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 ) |
---|
[197] | 2608 | ELSE |
---|
| 2609 | dopr_index(i) = 70 |
---|
| 2610 | dopr_unit(i) = 'kg2/kg2' |
---|
| 2611 | hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2612 | ENDIF |
---|
[106] | 2613 | |
---|
[388] | 2614 | CASE ( 'prho' ) |
---|
| 2615 | IF ( .NOT. ocean ) THEN |
---|
| 2616 | message_string = 'data_output_pr = ' // & |
---|
| 2617 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2618 | 'lemented for ocean = .FALSE.' |
---|
| 2619 | CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 ) |
---|
| 2620 | ELSE |
---|
| 2621 | dopr_index(i) = 71 |
---|
| 2622 | dopr_unit(i) = 'kg/m3' |
---|
| 2623 | hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2624 | ENDIF |
---|
| 2625 | |
---|
| 2626 | CASE ( 'hyp' ) |
---|
| 2627 | dopr_index(i) = 72 |
---|
[531] | 2628 | dopr_unit(i) = 'dbar' |
---|
[388] | 2629 | hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2630 | |
---|
[1053] | 2631 | CASE ( 'nr' ) |
---|
| 2632 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2633 | message_string = 'data_output_pr = ' // & |
---|
| 2634 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2635 | 'lemented for cloud_physics = .FALSE.' |
---|
| 2636 | CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 ) |
---|
| 2637 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2638 | message_string = 'data_output_pr = ' // & |
---|
| 2639 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2640 | 'lemented for cloud_scheme /= seifert_beheng' |
---|
| 2641 | CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 ) |
---|
[1115] | 2642 | ELSEIF ( .NOT. precipitation ) THEN |
---|
| 2643 | message_string = 'data_output_pr = ' // & |
---|
| 2644 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2645 | 'lemented for precipitation = .FALSE.' |
---|
| 2646 | CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 ) |
---|
[1053] | 2647 | ELSE |
---|
| 2648 | dopr_index(i) = 73 |
---|
| 2649 | dopr_unit(i) = '1/m3' |
---|
| 2650 | hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2651 | ENDIF |
---|
| 2652 | |
---|
| 2653 | CASE ( 'qr' ) |
---|
| 2654 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2655 | message_string = 'data_output_pr = ' // & |
---|
| 2656 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2657 | 'lemented for cloud_physics = .FALSE.' |
---|
| 2658 | CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 ) |
---|
| 2659 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2660 | message_string = 'data_output_pr = ' // & |
---|
| 2661 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2662 | 'lemented for cloud_scheme /= seifert_beheng' |
---|
| 2663 | CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 ) |
---|
[1115] | 2664 | ELSEIF ( .NOT. precipitation ) THEN |
---|
| 2665 | message_string = 'data_output_pr = ' // & |
---|
| 2666 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2667 | 'lemented for precipitation = .FALSE.' |
---|
| 2668 | CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 ) |
---|
[1053] | 2669 | ELSE |
---|
| 2670 | dopr_index(i) = 74 |
---|
| 2671 | dopr_unit(i) = 'kg/kg' |
---|
| 2672 | hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2673 | ENDIF |
---|
| 2674 | |
---|
| 2675 | CASE ( 'qc' ) |
---|
| 2676 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2677 | message_string = 'data_output_pr = ' // & |
---|
| 2678 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2679 | 'lemented for cloud_physics = .FALSE.' |
---|
| 2680 | CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 ) |
---|
| 2681 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2682 | message_string = 'data_output_pr = ' // & |
---|
| 2683 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2684 | 'lemented for cloud_scheme /= seifert_beheng' |
---|
| 2685 | CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 ) |
---|
| 2686 | ELSE |
---|
| 2687 | dopr_index(i) = 75 |
---|
| 2688 | dopr_unit(i) = 'kg/kg' |
---|
| 2689 | hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2690 | ENDIF |
---|
| 2691 | |
---|
| 2692 | CASE ( 'prr' ) |
---|
| 2693 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2694 | message_string = 'data_output_pr = ' // & |
---|
| 2695 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2696 | 'lemented for cloud_physics = .FALSE.' |
---|
| 2697 | CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 ) |
---|
| 2698 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2699 | message_string = 'data_output_pr = ' // & |
---|
| 2700 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2701 | 'lemented for cloud_scheme /= seifert_beheng' |
---|
| 2702 | CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 ) |
---|
| 2703 | ELSEIF ( .NOT. precipitation ) THEN |
---|
| 2704 | message_string = 'data_output_pr = ' // & |
---|
| 2705 | TRIM( data_output_pr(i) ) // ' is not imp' // & |
---|
| 2706 | 'lemented for precipitation = .FALSE.' |
---|
| 2707 | CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 ) |
---|
| 2708 | |
---|
| 2709 | ELSE |
---|
| 2710 | dopr_index(i) = 76 |
---|
| 2711 | dopr_unit(i) = 'kg/kg m/s' |
---|
| 2712 | hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2713 | ENDIF |
---|
| 2714 | |
---|
[1241] | 2715 | CASE ( 'ug' ) |
---|
| 2716 | dopr_index(i) = 78 |
---|
| 2717 | dopr_unit(i) = 'm/s' |
---|
| 2718 | hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2719 | |
---|
| 2720 | CASE ( 'vg' ) |
---|
| 2721 | dopr_index(i) = 79 |
---|
| 2722 | dopr_unit(i) = 'm/s' |
---|
| 2723 | hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 ) |
---|
| 2724 | |
---|
[1] | 2725 | CASE DEFAULT |
---|
[87] | 2726 | |
---|
| 2727 | CALL user_check_data_output_pr( data_output_pr(i), i, unit ) |
---|
| 2728 | |
---|
| 2729 | IF ( unit == 'illegal' ) THEN |
---|
[215] | 2730 | IF ( data_output_pr_user(1) /= ' ' ) THEN |
---|
| 2731 | message_string = 'illegal value for data_output_pr or ' // & |
---|
| 2732 | 'data_output_pr_user = "' // & |
---|
| 2733 | TRIM( data_output_pr(i) ) // '"' |
---|
[226] | 2734 | CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 ) |
---|
[215] | 2735 | ELSE |
---|
| 2736 | message_string = 'illegal value for data_output_pr = "' // & |
---|
| 2737 | TRIM( data_output_pr(i) ) // '"' |
---|
[226] | 2738 | CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 ) |
---|
[87] | 2739 | ENDIF |
---|
[1] | 2740 | ENDIF |
---|
| 2741 | |
---|
| 2742 | END SELECT |
---|
[667] | 2743 | |
---|
[1] | 2744 | ENDDO |
---|
| 2745 | |
---|
| 2746 | |
---|
| 2747 | ! |
---|
| 2748 | !-- Append user-defined data output variables to the standard data output |
---|
| 2749 | IF ( data_output_user(1) /= ' ' ) THEN |
---|
| 2750 | i = 1 |
---|
| 2751 | DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 ) |
---|
| 2752 | i = i + 1 |
---|
| 2753 | ENDDO |
---|
| 2754 | j = 1 |
---|
| 2755 | DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 ) |
---|
| 2756 | IF ( i > 100 ) THEN |
---|
[215] | 2757 | message_string = 'number of output quantitities given by data' // & |
---|
| 2758 | '_output and data_output_user exceeds the limit of 100' |
---|
[226] | 2759 | CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 ) |
---|
[1] | 2760 | ENDIF |
---|
| 2761 | data_output(i) = data_output_user(j) |
---|
| 2762 | i = i + 1 |
---|
| 2763 | j = j + 1 |
---|
| 2764 | ENDDO |
---|
| 2765 | ENDIF |
---|
| 2766 | |
---|
| 2767 | ! |
---|
| 2768 | !-- Check and set steering parameters for 2d/3d data output and averaging |
---|
| 2769 | i = 1 |
---|
| 2770 | DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 ) |
---|
| 2771 | ! |
---|
| 2772 | !-- Check for data averaging |
---|
| 2773 | ilen = LEN_TRIM( data_output(i) ) |
---|
| 2774 | j = 0 ! no data averaging |
---|
| 2775 | IF ( ilen > 3 ) THEN |
---|
| 2776 | IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN |
---|
| 2777 | j = 1 ! data averaging |
---|
| 2778 | data_output(i) = data_output(i)(1:ilen-3) |
---|
| 2779 | ENDIF |
---|
| 2780 | ENDIF |
---|
| 2781 | ! |
---|
| 2782 | !-- Check for cross section or volume data |
---|
| 2783 | ilen = LEN_TRIM( data_output(i) ) |
---|
| 2784 | k = 0 ! 3d data |
---|
| 2785 | var = data_output(i)(1:ilen) |
---|
| 2786 | IF ( ilen > 3 ) THEN |
---|
| 2787 | IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. & |
---|
| 2788 | data_output(i)(ilen-2:ilen) == '_xz' .OR. & |
---|
| 2789 | data_output(i)(ilen-2:ilen) == '_yz' ) THEN |
---|
| 2790 | k = 1 ! 2d data |
---|
| 2791 | var = data_output(i)(1:ilen-3) |
---|
| 2792 | ENDIF |
---|
| 2793 | ENDIF |
---|
| 2794 | ! |
---|
| 2795 | !-- Check for allowed value and set units |
---|
| 2796 | SELECT CASE ( TRIM( var ) ) |
---|
| 2797 | |
---|
| 2798 | CASE ( 'e' ) |
---|
| 2799 | IF ( constant_diffusion ) THEN |
---|
[215] | 2800 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2801 | 'res constant_diffusion = .FALSE.' |
---|
[226] | 2802 | CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 ) |
---|
[1] | 2803 | ENDIF |
---|
| 2804 | unit = 'm2/s2' |
---|
| 2805 | |
---|
[771] | 2806 | CASE ( 'lpt' ) |
---|
| 2807 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2808 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
[773] | 2809 | 'res cloud_physics = .TRUE.' |
---|
| 2810 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
[771] | 2811 | ENDIF |
---|
| 2812 | unit = 'K' |
---|
| 2813 | |
---|
[1053] | 2814 | CASE ( 'nr' ) |
---|
| 2815 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2816 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2817 | 'res cloud_physics = .TRUE.' |
---|
| 2818 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
| 2819 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2820 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2821 | 'res cloud_scheme = seifert_beheng' |
---|
| 2822 | CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 ) |
---|
| 2823 | ENDIF |
---|
| 2824 | unit = '1/m3' |
---|
| 2825 | |
---|
[1] | 2826 | CASE ( 'pc', 'pr' ) |
---|
| 2827 | IF ( .NOT. particle_advection ) THEN |
---|
[215] | 2828 | message_string = 'output of "' // TRIM( var ) // '" requir' // & |
---|
| 2829 | 'es a "particles_par"-NAMELIST in the parameter file (PARIN)' |
---|
[226] | 2830 | CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 ) |
---|
[1] | 2831 | ENDIF |
---|
| 2832 | IF ( TRIM( var ) == 'pc' ) unit = 'number' |
---|
| 2833 | IF ( TRIM( var ) == 'pr' ) unit = 'm' |
---|
| 2834 | |
---|
[1053] | 2835 | CASE ( 'prr' ) |
---|
| 2836 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2837 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2838 | 'res cloud_physics = .TRUE.' |
---|
| 2839 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
| 2840 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2841 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2842 | 'res cloud_scheme = seifert_beheng' |
---|
| 2843 | CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 ) |
---|
| 2844 | ELSEIF ( .NOT. precipitation ) THEN |
---|
| 2845 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2846 | 'res precipitation = .TRUE.' |
---|
| 2847 | CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 ) |
---|
| 2848 | ENDIF |
---|
| 2849 | unit = 'kg/kg m/s' |
---|
| 2850 | |
---|
[1] | 2851 | CASE ( 'q', 'vpt' ) |
---|
[75] | 2852 | IF ( .NOT. humidity ) THEN |
---|
[215] | 2853 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2854 | 'res humidity = .TRUE.' |
---|
[226] | 2855 | CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 ) |
---|
[1] | 2856 | ENDIF |
---|
| 2857 | IF ( TRIM( var ) == 'q' ) unit = 'kg/kg' |
---|
| 2858 | IF ( TRIM( var ) == 'vpt' ) unit = 'K' |
---|
| 2859 | |
---|
[1053] | 2860 | CASE ( 'qc' ) |
---|
| 2861 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2862 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2863 | 'res cloud_physics = .TRUE.' |
---|
| 2864 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
| 2865 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2866 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2867 | 'res cloud_scheme = seifert_beheng' |
---|
| 2868 | CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 ) |
---|
| 2869 | ENDIF |
---|
| 2870 | unit = 'kg/kg' |
---|
| 2871 | |
---|
[1] | 2872 | CASE ( 'ql' ) |
---|
| 2873 | IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN |
---|
[215] | 2874 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2875 | 'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.' |
---|
[226] | 2876 | CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 ) |
---|
[1] | 2877 | ENDIF |
---|
| 2878 | unit = 'kg/kg' |
---|
| 2879 | |
---|
| 2880 | CASE ( 'ql_c', 'ql_v', 'ql_vp' ) |
---|
| 2881 | IF ( .NOT. cloud_droplets ) THEN |
---|
[215] | 2882 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2883 | 'res cloud_droplets = .TRUE.' |
---|
[226] | 2884 | CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 ) |
---|
[1] | 2885 | ENDIF |
---|
| 2886 | IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg' |
---|
| 2887 | IF ( TRIM( var ) == 'ql_v' ) unit = 'm3' |
---|
| 2888 | IF ( TRIM( var ) == 'ql_vp' ) unit = 'none' |
---|
| 2889 | |
---|
[1053] | 2890 | CASE ( 'qr' ) |
---|
| 2891 | IF ( .NOT. cloud_physics ) THEN |
---|
| 2892 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2893 | 'res cloud_physics = .TRUE.' |
---|
| 2894 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
| 2895 | ELSEIF ( icloud_scheme /= 0 ) THEN |
---|
| 2896 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2897 | 'res cloud_scheme = seifert_beheng' |
---|
| 2898 | CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 ) |
---|
[1115] | 2899 | ELSEIF ( .NOT. precipitation ) THEN |
---|
| 2900 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2901 | 'res precipitation = .TRUE.' |
---|
| 2902 | CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 ) |
---|
[1053] | 2903 | ENDIF |
---|
| 2904 | unit = 'kg/kg' |
---|
| 2905 | |
---|
[1] | 2906 | CASE ( 'qv' ) |
---|
| 2907 | IF ( .NOT. cloud_physics ) THEN |
---|
[215] | 2908 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2909 | 'res cloud_physics = .TRUE.' |
---|
[226] | 2910 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
[1] | 2911 | ENDIF |
---|
| 2912 | unit = 'kg/kg' |
---|
| 2913 | |
---|
[96] | 2914 | CASE ( 'rho' ) |
---|
| 2915 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2916 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2917 | 'res ocean = .TRUE.' |
---|
[226] | 2918 | CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 ) |
---|
[96] | 2919 | ENDIF |
---|
| 2920 | unit = 'kg/m3' |
---|
| 2921 | |
---|
[1] | 2922 | CASE ( 's' ) |
---|
| 2923 | IF ( .NOT. passive_scalar ) THEN |
---|
[215] | 2924 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2925 | 'res passive_scalar = .TRUE.' |
---|
[226] | 2926 | CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 ) |
---|
[1] | 2927 | ENDIF |
---|
| 2928 | unit = 'conc' |
---|
| 2929 | |
---|
[96] | 2930 | CASE ( 'sa' ) |
---|
| 2931 | IF ( .NOT. ocean ) THEN |
---|
[215] | 2932 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2933 | 'res ocean = .TRUE.' |
---|
[226] | 2934 | CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 ) |
---|
[96] | 2935 | ENDIF |
---|
| 2936 | unit = 'psu' |
---|
| 2937 | |
---|
[978] | 2938 | CASE ( 'u*', 't*', 'lwp*', 'pra*', 'prr*', 'qsws*', 'shf*', 'z0*', 'z0h*' ) |
---|
[1] | 2939 | IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN |
---|
[215] | 2940 | message_string = 'illegal value for data_output: "' // & |
---|
| 2941 | TRIM( var ) // '" & only 2d-horizontal ' // & |
---|
| 2942 | 'cross sections are allowed for this value' |
---|
[226] | 2943 | CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 ) |
---|
[1] | 2944 | ENDIF |
---|
| 2945 | IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN |
---|
[215] | 2946 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2947 | 'res cloud_physics = .TRUE.' |
---|
[226] | 2948 | CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 ) |
---|
[1] | 2949 | ENDIF |
---|
[72] | 2950 | IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN |
---|
[215] | 2951 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2952 | 'res precipitation = .TRUE.' |
---|
[226] | 2953 | CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 ) |
---|
[72] | 2954 | ENDIF |
---|
| 2955 | IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN |
---|
[215] | 2956 | message_string = 'temporal averaging of precipitation ' // & |
---|
| 2957 | 'amount "' // TRIM( var ) // '" is not possible' |
---|
[226] | 2958 | CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 ) |
---|
[72] | 2959 | ENDIF |
---|
| 2960 | IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN |
---|
[215] | 2961 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2962 | 'res precipitation = .TRUE.' |
---|
[226] | 2963 | CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 ) |
---|
[72] | 2964 | ENDIF |
---|
[354] | 2965 | IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN |
---|
| 2966 | message_string = 'output of "' // TRIM( var ) // '" requi' // & |
---|
| 2967 | 'res humidity = .TRUE.' |
---|
| 2968 | CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 ) |
---|
| 2969 | ENDIF |
---|
[72] | 2970 | |
---|
[354] | 2971 | IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/kg*m' |
---|
| 2972 | IF ( TRIM( var ) == 'pra*' ) unit = 'mm' |
---|
| 2973 | IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s' |
---|
| 2974 | IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs' |
---|
| 2975 | IF ( TRIM( var ) == 'shf*' ) unit = 'K*m/s' |
---|
| 2976 | IF ( TRIM( var ) == 't*' ) unit = 'K' |
---|
| 2977 | IF ( TRIM( var ) == 'u*' ) unit = 'm/s' |
---|
| 2978 | IF ( TRIM( var ) == 'z0*' ) unit = 'm' |
---|
[996] | 2979 | IF ( TRIM( var ) == 'z0h*' ) unit = 'm' |
---|
[72] | 2980 | |
---|
[1] | 2981 | |
---|
| 2982 | CASE ( 'p', 'pt', 'u', 'v', 'w' ) |
---|
| 2983 | IF ( TRIM( var ) == 'p' ) unit = 'Pa' |
---|
| 2984 | IF ( TRIM( var ) == 'pt' ) unit = 'K' |
---|
| 2985 | IF ( TRIM( var ) == 'u' ) unit = 'm/s' |
---|
| 2986 | IF ( TRIM( var ) == 'v' ) unit = 'm/s' |
---|
| 2987 | IF ( TRIM( var ) == 'w' ) unit = 'm/s' |
---|
| 2988 | CONTINUE |
---|
| 2989 | |
---|
| 2990 | CASE DEFAULT |
---|
| 2991 | CALL user_check_data_output( var, unit ) |
---|
| 2992 | |
---|
| 2993 | IF ( unit == 'illegal' ) THEN |
---|
[215] | 2994 | IF ( data_output_user(1) /= ' ' ) THEN |
---|
| 2995 | message_string = 'illegal value for data_output or ' // & |
---|
| 2996 | 'data_output_user = "' // TRIM( data_output(i) ) // '"' |
---|
[226] | 2997 | CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 ) |
---|
[215] | 2998 | ELSE |
---|
| 2999 | message_string = 'illegal value for data_output =' // & |
---|
| 3000 | TRIM( data_output(i) ) // '"' |
---|
[226] | 3001 | CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 ) |
---|
[1] | 3002 | ENDIF |
---|
| 3003 | ENDIF |
---|
| 3004 | |
---|
| 3005 | END SELECT |
---|
| 3006 | ! |
---|
| 3007 | !-- Set the internal steering parameters appropriately |
---|
| 3008 | IF ( k == 0 ) THEN |
---|
| 3009 | do3d_no(j) = do3d_no(j) + 1 |
---|
| 3010 | do3d(j,do3d_no(j)) = data_output(i) |
---|
| 3011 | do3d_unit(j,do3d_no(j)) = unit |
---|
| 3012 | ELSE |
---|
| 3013 | do2d_no(j) = do2d_no(j) + 1 |
---|
| 3014 | do2d(j,do2d_no(j)) = data_output(i) |
---|
| 3015 | do2d_unit(j,do2d_no(j)) = unit |
---|
| 3016 | IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN |
---|
| 3017 | data_output_xy(j) = .TRUE. |
---|
| 3018 | ENDIF |
---|
| 3019 | IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN |
---|
| 3020 | data_output_xz(j) = .TRUE. |
---|
| 3021 | ENDIF |
---|
| 3022 | IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN |
---|
| 3023 | data_output_yz(j) = .TRUE. |
---|
| 3024 | ENDIF |
---|
| 3025 | ENDIF |
---|
| 3026 | |
---|
| 3027 | IF ( j == 1 ) THEN |
---|
| 3028 | ! |
---|
| 3029 | !-- Check, if variable is already subject to averaging |
---|
| 3030 | found = .FALSE. |
---|
| 3031 | DO k = 1, doav_n |
---|
| 3032 | IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE. |
---|
| 3033 | ENDDO |
---|
| 3034 | |
---|
| 3035 | IF ( .NOT. found ) THEN |
---|
| 3036 | doav_n = doav_n + 1 |
---|
| 3037 | doav(doav_n) = var |
---|
| 3038 | ENDIF |
---|
| 3039 | ENDIF |
---|
| 3040 | |
---|
| 3041 | i = i + 1 |
---|
| 3042 | ENDDO |
---|
| 3043 | |
---|
| 3044 | ! |
---|
[376] | 3045 | !-- Averaged 2d or 3d output requires that an averaging interval has been set |
---|
| 3046 | IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN |
---|
| 3047 | WRITE( message_string, * ) 'output of averaged quantity "', & |
---|
| 3048 | TRIM( doav(1) ), '_av" requires to set a ', & |
---|
| 3049 | 'non-zero & averaging interval' |
---|
| 3050 | CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 ) |
---|
| 3051 | ENDIF |
---|
| 3052 | |
---|
| 3053 | ! |
---|
[308] | 3054 | !-- Check sectional planes and store them in one shared array |
---|
| 3055 | IF ( ANY( section_xy > nz + 1 ) ) THEN |
---|
| 3056 | WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1 |
---|
| 3057 | CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 ) |
---|
| 3058 | ENDIF |
---|
| 3059 | IF ( ANY( section_xz > ny + 1 ) ) THEN |
---|
| 3060 | WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1 |
---|
| 3061 | CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 ) |
---|
| 3062 | ENDIF |
---|
| 3063 | IF ( ANY( section_yz > nx + 1 ) ) THEN |
---|
| 3064 | WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1 |
---|
| 3065 | CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 ) |
---|
| 3066 | ENDIF |
---|
[1] | 3067 | section(:,1) = section_xy |
---|
| 3068 | section(:,2) = section_xz |
---|
| 3069 | section(:,3) = section_yz |
---|
| 3070 | |
---|
| 3071 | ! |
---|
| 3072 | !-- Upper plot limit for 2D vertical sections |
---|
| 3073 | IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt) |
---|
| 3074 | IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN |
---|
[215] | 3075 | WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, & |
---|
| 3076 | ' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), & |
---|
| 3077 | ' (zu(nzt))' |
---|
[226] | 3078 | CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 ) |
---|
[1] | 3079 | ENDIF |
---|
| 3080 | |
---|
| 3081 | ! |
---|
| 3082 | !-- Upper plot limit for 3D arrays |
---|
| 3083 | IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1 |
---|
| 3084 | |
---|
| 3085 | ! |
---|
| 3086 | !-- Determine and check accuracy for compressed 3D plot output |
---|
| 3087 | IF ( do3d_compress ) THEN |
---|
| 3088 | ! |
---|
| 3089 | !-- Compression only permissible on T3E machines |
---|
| 3090 | IF ( host(1:3) /= 't3e' ) THEN |
---|
[215] | 3091 | message_string = 'do3d_compress = .TRUE. not allowed on host "' // & |
---|
| 3092 | TRIM( host ) // '"' |
---|
[226] | 3093 | CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 ) |
---|
[1] | 3094 | ENDIF |
---|
| 3095 | |
---|
| 3096 | i = 1 |
---|
| 3097 | DO WHILE ( do3d_comp_prec(i) /= ' ' ) |
---|
| 3098 | |
---|
| 3099 | ilen = LEN_TRIM( do3d_comp_prec(i) ) |
---|
| 3100 | IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. & |
---|
| 3101 | LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN |
---|
[215] | 3102 | WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', & |
---|
| 3103 | '(', i, ') = "', TRIM(do3d_comp_prec(i)),'"' |
---|
[226] | 3104 | CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 ) |
---|
[1] | 3105 | ENDIF |
---|
| 3106 | |
---|
| 3107 | prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' ) |
---|
| 3108 | var = do3d_comp_prec(i)(1:ilen-1) |
---|
| 3109 | |
---|
| 3110 | SELECT CASE ( var ) |
---|
| 3111 | |
---|
| 3112 | CASE ( 'u' ) |
---|
| 3113 | j = 1 |
---|
| 3114 | CASE ( 'v' ) |
---|
| 3115 | j = 2 |
---|
| 3116 | CASE ( 'w' ) |
---|
| 3117 | j = 3 |
---|
| 3118 | CASE ( 'p' ) |
---|
| 3119 | j = 4 |
---|
| 3120 | CASE ( 'pt' ) |
---|
| 3121 | j = 5 |
---|
| 3122 | |
---|
| 3123 | CASE DEFAULT |
---|
[215] | 3124 | WRITE( message_string, * ) 'unknown variable "', & |
---|
| 3125 | TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', & |
---|
| 3126 | i, ')' |
---|
[226] | 3127 | CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 ) |
---|
[1] | 3128 | |
---|
| 3129 | END SELECT |
---|
| 3130 | |
---|
| 3131 | plot_3d_precision(j)%precision = prec |
---|
| 3132 | i = i + 1 |
---|
| 3133 | |
---|
| 3134 | ENDDO |
---|
| 3135 | ENDIF |
---|
| 3136 | |
---|
| 3137 | ! |
---|
| 3138 | !-- Check the data output format(s) |
---|
| 3139 | IF ( data_output_format(1) == ' ' ) THEN |
---|
| 3140 | ! |
---|
| 3141 | !-- Default value |
---|
| 3142 | netcdf_output = .TRUE. |
---|
| 3143 | ELSE |
---|
| 3144 | i = 1 |
---|
| 3145 | DO WHILE ( data_output_format(i) /= ' ' ) |
---|
| 3146 | |
---|
| 3147 | SELECT CASE ( data_output_format(i) ) |
---|
| 3148 | |
---|
| 3149 | CASE ( 'netcdf' ) |
---|
| 3150 | netcdf_output = .TRUE. |
---|
| 3151 | CASE ( 'iso2d' ) |
---|
| 3152 | iso2d_output = .TRUE. |
---|
| 3153 | CASE ( 'avs' ) |
---|
| 3154 | avs_output = .TRUE. |
---|
| 3155 | |
---|
| 3156 | CASE DEFAULT |
---|
[215] | 3157 | message_string = 'unknown value for data_output_format "' // & |
---|
| 3158 | TRIM( data_output_format(i) ) // '"' |
---|
[226] | 3159 | CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 ) |
---|
[1] | 3160 | |
---|
| 3161 | END SELECT |
---|
| 3162 | |
---|
| 3163 | i = i + 1 |
---|
| 3164 | IF ( i > 10 ) EXIT |
---|
| 3165 | |
---|
| 3166 | ENDDO |
---|
[1031] | 3167 | ENDIF |
---|
[1] | 3168 | |
---|
[1031] | 3169 | ! |
---|
| 3170 | !-- Set output format string (used in header) |
---|
| 3171 | IF ( netcdf_output ) THEN |
---|
| 3172 | |
---|
| 3173 | SELECT CASE ( netcdf_data_format ) |
---|
| 3174 | CASE ( 1 ) |
---|
| 3175 | output_format_netcdf = 'netCDF classic' |
---|
| 3176 | CASE ( 2 ) |
---|
| 3177 | output_format_netcdf = 'netCDF 64bit offset' |
---|
| 3178 | CASE ( 3 ) |
---|
| 3179 | output_format_netcdf = 'netCDF4/HDF5' |
---|
| 3180 | CASE ( 4 ) |
---|
| 3181 | output_format_netcdf = 'netCDF4/HDF5 classic' |
---|
| 3182 | CASE ( 5 ) |
---|
| 3183 | output_format_netcdf = 'parallel netCDF4/HDF5' |
---|
| 3184 | CASE ( 6 ) |
---|
| 3185 | output_format_netcdf = 'parallel netCDF4/HDF5 classic' |
---|
| 3186 | |
---|
| 3187 | END SELECT |
---|
| 3188 | |
---|
[1] | 3189 | ENDIF |
---|
| 3190 | |
---|
[1236] | 3191 | #if defined( __spectra ) |
---|
[1] | 3192 | ! |
---|
[1236] | 3193 | !-- Check the number of spectra level to be output |
---|
| 3194 | i = 1 |
---|
| 3195 | DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 ) |
---|
| 3196 | i = i + 1 |
---|
| 3197 | ENDDO |
---|
| 3198 | i = i - 1 |
---|
| 3199 | IF ( i == 0 ) THEN |
---|
| 3200 | WRITE( message_string, * ) 'no spectra levels given' |
---|
| 3201 | CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 ) |
---|
| 3202 | ENDIF |
---|
| 3203 | #endif |
---|
| 3204 | |
---|
| 3205 | ! |
---|
[410] | 3206 | !-- Check mask conditions |
---|
[553] | 3207 | DO mid = 1, max_masks |
---|
[567] | 3208 | IF ( data_output_masks(mid,1) /= ' ' .OR. & |
---|
| 3209 | data_output_masks_user(mid,1) /= ' ' ) THEN |
---|
[553] | 3210 | masks = masks + 1 |
---|
| 3211 | ENDIF |
---|
| 3212 | ENDDO |
---|
| 3213 | |
---|
[410] | 3214 | IF ( masks < 0 .OR. masks > max_masks ) THEN |
---|
| 3215 | WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', & |
---|
| 3216 | '<= ', max_masks, ' (=max_masks)' |
---|
[564] | 3217 | CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 ) |
---|
[410] | 3218 | ENDIF |
---|
| 3219 | IF ( masks > 0 ) THEN |
---|
| 3220 | mask_scale(1) = mask_scale_x |
---|
| 3221 | mask_scale(2) = mask_scale_y |
---|
| 3222 | mask_scale(3) = mask_scale_z |
---|
| 3223 | IF ( ANY( mask_scale <= 0.0 ) ) THEN |
---|
| 3224 | WRITE( message_string, * ) & |
---|
| 3225 | 'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', & |
---|
| 3226 | 'must be > 0.0' |
---|
[564] | 3227 | CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 ) |
---|
[410] | 3228 | ENDIF |
---|
| 3229 | ! |
---|
| 3230 | !-- Generate masks for masked data output |
---|
| 3231 | CALL init_masks |
---|
| 3232 | ENDIF |
---|
| 3233 | |
---|
| 3234 | ! |
---|
[493] | 3235 | !-- Check the NetCDF data format |
---|
[924] | 3236 | #if ! defined ( __check ) |
---|
[1034] | 3237 | IF ( netcdf_data_format > 2 ) THEN |
---|
[924] | 3238 | #if defined( __netcdf4 ) |
---|
[493] | 3239 | CONTINUE |
---|
| 3240 | #else |
---|
[1031] | 3241 | message_string = 'netCDF: netCDF4 format requested but no ' // & |
---|
[493] | 3242 | 'cpp-directive __netcdf4 given & switch ' // & |
---|
| 3243 | 'back to 64-bit offset format' |
---|
| 3244 | CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 ) |
---|
| 3245 | netcdf_data_format = 2 |
---|
| 3246 | #endif |
---|
| 3247 | ENDIF |
---|
[1031] | 3248 | IF ( netcdf_data_format > 4 ) THEN |
---|
| 3249 | #if defined( __netcdf4 ) && defined( __netcdf4_parallel ) |
---|
| 3250 | CONTINUE |
---|
| 3251 | #else |
---|
| 3252 | message_string = 'netCDF: netCDF4 parallel output requested but no ' // & |
---|
| 3253 | 'cpp-directive __netcdf4_parallel given & switch ' // & |
---|
| 3254 | 'back to netCDF4 non-parallel output' |
---|
| 3255 | CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 ) |
---|
| 3256 | netcdf_data_format = netcdf_data_format - 2 |
---|
[892] | 3257 | #endif |
---|
[1031] | 3258 | ENDIF |
---|
| 3259 | #endif |
---|
[667] | 3260 | |
---|
[809] | 3261 | #if ! defined( __check ) |
---|
[1031] | 3262 | ! |
---|
[1] | 3263 | !-- Check netcdf precison |
---|
| 3264 | ldum = .FALSE. |
---|
| 3265 | CALL define_netcdf_header( 'ch', ldum, 0 ) |
---|
[807] | 3266 | #endif |
---|
[1] | 3267 | ! |
---|
| 3268 | !-- Check, whether a constant diffusion coefficient shall be used |
---|
| 3269 | IF ( km_constant /= -1.0 ) THEN |
---|
| 3270 | IF ( km_constant < 0.0 ) THEN |
---|
[215] | 3271 | WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0' |
---|
[226] | 3272 | CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 ) |
---|
[1] | 3273 | ELSE |
---|
| 3274 | IF ( prandtl_number < 0.0 ) THEN |
---|
[215] | 3275 | WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, & |
---|
| 3276 | ' < 0.0' |
---|
[226] | 3277 | CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 ) |
---|
[1] | 3278 | ENDIF |
---|
| 3279 | constant_diffusion = .TRUE. |
---|
| 3280 | |
---|
| 3281 | IF ( prandtl_layer ) THEN |
---|
[215] | 3282 | message_string = 'prandtl_layer is not allowed with fixed ' // & |
---|
| 3283 | 'value of km' |
---|
[226] | 3284 | CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 ) |
---|
[1] | 3285 | ENDIF |
---|
| 3286 | ENDIF |
---|
| 3287 | ENDIF |
---|
| 3288 | |
---|
| 3289 | ! |
---|
[978] | 3290 | !-- In case of non-cyclic lateral boundaries and a damping layer for the |
---|
| 3291 | !-- potential temperature, check the width of the damping layer |
---|
[1] | 3292 | IF ( bc_lr /= 'cyclic' ) THEN |
---|
[996] | 3293 | IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN |
---|
[978] | 3294 | message_string = 'pt_damping_width out of range' |
---|
[226] | 3295 | CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 ) |
---|
[1] | 3296 | ENDIF |
---|
| 3297 | ENDIF |
---|
| 3298 | |
---|
| 3299 | IF ( bc_ns /= 'cyclic' ) THEN |
---|
[996] | 3300 | IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN |
---|
[978] | 3301 | message_string = 'pt_damping_width out of range' |
---|
[226] | 3302 | CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 ) |
---|
[1] | 3303 | ENDIF |
---|
| 3304 | ENDIF |
---|
| 3305 | |
---|
| 3306 | ! |
---|
| 3307 | !-- Check value range for rif |
---|
| 3308 | IF ( rif_min >= rif_max ) THEN |
---|
[215] | 3309 | WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', & |
---|
| 3310 | 'than rif_max = ', rif_max |
---|
[226] | 3311 | CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 ) |
---|
[1] | 3312 | ENDIF |
---|
| 3313 | |
---|
| 3314 | ! |
---|
| 3315 | !-- Determine upper and lower hight level indices for random perturbations |
---|
[97] | 3316 | IF ( disturbance_level_b == -9999999.9 ) THEN |
---|
| 3317 | IF ( ocean ) THEN |
---|
| 3318 | disturbance_level_b = zu((nzt*2)/3) |
---|
| 3319 | disturbance_level_ind_b = ( nzt * 2 ) / 3 |
---|
| 3320 | ELSE |
---|
| 3321 | disturbance_level_b = zu(nzb+3) |
---|
| 3322 | disturbance_level_ind_b = nzb + 3 |
---|
| 3323 | ENDIF |
---|
[1] | 3324 | ELSEIF ( disturbance_level_b < zu(3) ) THEN |
---|
[215] | 3325 | WRITE( message_string, * ) 'disturbance_level_b = ', & |
---|
| 3326 | disturbance_level_b, ' must be >= ', zu(3), '(zu(3))' |
---|
[226] | 3327 | CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 ) |
---|
[1] | 3328 | ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN |
---|
[215] | 3329 | WRITE( message_string, * ) 'disturbance_level_b = ', & |
---|
| 3330 | disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))' |
---|
[226] | 3331 | CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 ) |
---|
[1] | 3332 | ELSE |
---|
| 3333 | DO k = 3, nzt-2 |
---|
| 3334 | IF ( disturbance_level_b <= zu(k) ) THEN |
---|
| 3335 | disturbance_level_ind_b = k |
---|
| 3336 | EXIT |
---|
| 3337 | ENDIF |
---|
| 3338 | ENDDO |
---|
| 3339 | ENDIF |
---|
| 3340 | |
---|
[97] | 3341 | IF ( disturbance_level_t == -9999999.9 ) THEN |
---|
| 3342 | IF ( ocean ) THEN |
---|
| 3343 | disturbance_level_t = zu(nzt-3) |
---|
| 3344 | disturbance_level_ind_t = nzt - 3 |
---|
| 3345 | ELSE |
---|
| 3346 | disturbance_level_t = zu(nzt/3) |
---|
| 3347 | disturbance_level_ind_t = nzt / 3 |
---|
| 3348 | ENDIF |
---|
[1] | 3349 | ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN |
---|
[215] | 3350 | WRITE( message_string, * ) 'disturbance_level_t = ', & |
---|
| 3351 | disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))' |
---|
[226] | 3352 | CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 ) |
---|
[1] | 3353 | ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN |
---|
[215] | 3354 | WRITE( message_string, * ) 'disturbance_level_t = ', & |
---|
| 3355 | disturbance_level_t, ' must be >= disturbance_level_b = ', & |
---|
| 3356 | disturbance_level_b |
---|
[226] | 3357 | CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 ) |
---|
[1] | 3358 | ELSE |
---|
| 3359 | DO k = 3, nzt-2 |
---|
| 3360 | IF ( disturbance_level_t <= zu(k) ) THEN |
---|
| 3361 | disturbance_level_ind_t = k |
---|
| 3362 | EXIT |
---|
| 3363 | ENDIF |
---|
| 3364 | ENDDO |
---|
| 3365 | ENDIF |
---|
| 3366 | |
---|
| 3367 | ! |
---|
| 3368 | !-- Check again whether the levels determined this way are ok. |
---|
| 3369 | !-- Error may occur at automatic determination and too few grid points in |
---|
| 3370 | !-- z-direction. |
---|
| 3371 | IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN |
---|
[215] | 3372 | WRITE( message_string, * ) 'disturbance_level_ind_t = ', & |
---|
| 3373 | disturbance_level_ind_t, ' must be >= disturbance_level_b = ', & |
---|
| 3374 | disturbance_level_b |
---|
[226] | 3375 | CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 ) |
---|
[1] | 3376 | ENDIF |
---|
| 3377 | |
---|
| 3378 | ! |
---|
| 3379 | !-- Determine the horizontal index range for random perturbations. |
---|
| 3380 | !-- In case of non-cyclic horizontal boundaries, no perturbations are imposed |
---|
| 3381 | !-- near the inflow and the perturbation area is further limited to ...(1) |
---|
| 3382 | !-- after the initial phase of the flow. |
---|
| 3383 | dist_nxl = 0; dist_nxr = nx |
---|
| 3384 | dist_nys = 0; dist_nyn = ny |
---|
| 3385 | IF ( bc_lr /= 'cyclic' ) THEN |
---|
| 3386 | IF ( inflow_disturbance_begin == -1 ) THEN |
---|
| 3387 | inflow_disturbance_begin = MIN( 10, nx/2 ) |
---|
| 3388 | ENDIF |
---|
| 3389 | IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )& |
---|
| 3390 | THEN |
---|
[215] | 3391 | message_string = 'inflow_disturbance_begin out of range' |
---|
[226] | 3392 | CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 ) |
---|
[1] | 3393 | ENDIF |
---|
| 3394 | IF ( inflow_disturbance_end == -1 ) THEN |
---|
| 3395 | inflow_disturbance_end = MIN( 100, 3*nx/4 ) |
---|
| 3396 | ENDIF |
---|
| 3397 | IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) & |
---|
| 3398 | THEN |
---|
[215] | 3399 | message_string = 'inflow_disturbance_end out of range' |
---|
[226] | 3400 | CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 ) |
---|
[1] | 3401 | ENDIF |
---|
| 3402 | ELSEIF ( bc_ns /= 'cyclic' ) THEN |
---|
| 3403 | IF ( inflow_disturbance_begin == -1 ) THEN |
---|
| 3404 | inflow_disturbance_begin = MIN( 10, ny/2 ) |
---|
| 3405 | ENDIF |
---|
| 3406 | IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )& |
---|
| 3407 | THEN |
---|
[215] | 3408 | message_string = 'inflow_disturbance_begin out of range' |
---|
[226] | 3409 | CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 ) |
---|
[1] | 3410 | ENDIF |
---|
| 3411 | IF ( inflow_disturbance_end == -1 ) THEN |
---|
| 3412 | inflow_disturbance_end = MIN( 100, 3*ny/4 ) |
---|
| 3413 | ENDIF |
---|
| 3414 | IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) & |
---|
| 3415 | THEN |
---|
[215] | 3416 | message_string = 'inflow_disturbance_end out of range' |
---|
[226] | 3417 | CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 ) |
---|
[1] | 3418 | ENDIF |
---|
| 3419 | ENDIF |
---|
| 3420 | |
---|
[1159] | 3421 | IF ( bc_lr == 'radiation/dirichlet' ) THEN |
---|
[1] | 3422 | dist_nxr = nx - inflow_disturbance_begin |
---|
| 3423 | dist_nxl(1) = nx - inflow_disturbance_end |
---|
[1159] | 3424 | ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN |
---|
[1] | 3425 | dist_nxl = inflow_disturbance_begin |
---|
| 3426 | dist_nxr(1) = inflow_disturbance_end |
---|
[73] | 3427 | ENDIF |
---|
[1159] | 3428 | IF ( bc_ns == 'dirichlet/radiation' ) THEN |
---|
[1] | 3429 | dist_nyn = ny - inflow_disturbance_begin |
---|
| 3430 | dist_nys(1) = ny - inflow_disturbance_end |
---|
[1159] | 3431 | ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN |
---|
[1] | 3432 | dist_nys = inflow_disturbance_begin |
---|
| 3433 | dist_nyn(1) = inflow_disturbance_end |
---|
| 3434 | ENDIF |
---|
| 3435 | |
---|
| 3436 | ! |
---|
[151] | 3437 | !-- A turbulent inflow requires Dirichlet conditions at the respective inflow |
---|
| 3438 | !-- boundary (so far, a turbulent inflow is realized from the left side only) |
---|
[1159] | 3439 | IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN |
---|
[215] | 3440 | message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // & |
---|
| 3441 | 'condition at the inflow boundary' |
---|
[226] | 3442 | CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 ) |
---|
[151] | 3443 | ENDIF |
---|
| 3444 | |
---|
| 3445 | ! |
---|
[1060] | 3446 | !-- Turbulent inflow requires that 3d arrays have been cyclically filled with |
---|
[1103] | 3447 | !-- data from prerun in the first main run |
---|
| 3448 | IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. & |
---|
| 3449 | initializing_actions /= 'read_restart_data' ) THEN |
---|
[1060] | 3450 | message_string = 'turbulent_inflow = .T. requires ' // & |
---|
| 3451 | 'initializing_actions = ''cyclic_fill'' ' |
---|
| 3452 | CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 ) |
---|
| 3453 | ENDIF |
---|
| 3454 | |
---|
| 3455 | ! |
---|
[151] | 3456 | !-- In case of turbulent inflow calculate the index of the recycling plane |
---|
| 3457 | IF ( turbulent_inflow ) THEN |
---|
| 3458 | IF ( recycling_width == 9999999.9 ) THEN |
---|
| 3459 | ! |
---|
| 3460 | !-- Set the default value for the width of the recycling domain |
---|
| 3461 | recycling_width = 0.1 * nx * dx |
---|
| 3462 | ELSE |
---|
| 3463 | IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN |
---|
[215] | 3464 | WRITE( message_string, * ) 'illegal value for recycling_width:', & |
---|
| 3465 | ' ', recycling_width |
---|
[226] | 3466 | CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 ) |
---|
[151] | 3467 | ENDIF |
---|
| 3468 | ENDIF |
---|
| 3469 | ! |
---|
| 3470 | !-- Calculate the index |
---|
| 3471 | recycling_plane = recycling_width / dx |
---|
| 3472 | ENDIF |
---|
| 3473 | |
---|
| 3474 | ! |
---|
[1] | 3475 | !-- Check random generator |
---|
| 3476 | IF ( random_generator /= 'system-specific' .AND. & |
---|
| 3477 | random_generator /= 'numerical-recipes' ) THEN |
---|
[215] | 3478 | message_string = 'unknown random generator: random_generator = "' // & |
---|
| 3479 | TRIM( random_generator ) // '"' |
---|
[226] | 3480 | CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 ) |
---|
[1] | 3481 | ENDIF |
---|
| 3482 | |
---|
| 3483 | ! |
---|
| 3484 | !-- Determine damping level index for 1D model |
---|
| 3485 | IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN |
---|
| 3486 | IF ( damp_level_1d == -1.0 ) THEN |
---|
| 3487 | damp_level_1d = zu(nzt+1) |
---|
| 3488 | damp_level_ind_1d = nzt + 1 |
---|
| 3489 | ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN |
---|
[215] | 3490 | WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, & |
---|
| 3491 | ' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))' |
---|
[226] | 3492 | CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 ) |
---|
[1] | 3493 | ELSE |
---|
| 3494 | DO k = 1, nzt+1 |
---|
| 3495 | IF ( damp_level_1d <= zu(k) ) THEN |
---|
| 3496 | damp_level_ind_1d = k |
---|
| 3497 | EXIT |
---|
| 3498 | ENDIF |
---|
| 3499 | ENDDO |
---|
| 3500 | ENDIF |
---|
| 3501 | ENDIF |
---|
[215] | 3502 | |
---|
[1] | 3503 | ! |
---|
| 3504 | !-- Check some other 1d-model parameters |
---|
| 3505 | IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. & |
---|
| 3506 | TRIM( mixing_length_1d ) /= 'blackadar' ) THEN |
---|
[215] | 3507 | message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // & |
---|
| 3508 | '" is unknown' |
---|
[226] | 3509 | CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 ) |
---|
[1] | 3510 | ENDIF |
---|
| 3511 | IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. & |
---|
| 3512 | TRIM( dissipation_1d ) /= 'detering' ) THEN |
---|
[215] | 3513 | message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // & |
---|
| 3514 | '" is unknown' |
---|
[226] | 3515 | CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 ) |
---|
[1] | 3516 | ENDIF |
---|
| 3517 | |
---|
| 3518 | ! |
---|
| 3519 | !-- Set time for the next user defined restart (time_restart is the |
---|
| 3520 | !-- internal parameter for steering restart events) |
---|
| 3521 | IF ( restart_time /= 9999999.9 ) THEN |
---|
[291] | 3522 | IF ( restart_time > time_since_reference_point ) THEN |
---|
| 3523 | time_restart = restart_time |
---|
| 3524 | ENDIF |
---|
[1] | 3525 | ELSE |
---|
| 3526 | ! |
---|
| 3527 | !-- In case of a restart run, set internal parameter to default (no restart) |
---|
| 3528 | !-- if the NAMELIST-parameter restart_time is omitted |
---|
| 3529 | time_restart = 9999999.9 |
---|
| 3530 | ENDIF |
---|
| 3531 | |
---|
| 3532 | ! |
---|
| 3533 | !-- Set default value of the time needed to terminate a model run |
---|
| 3534 | IF ( termination_time_needed == -1.0 ) THEN |
---|
| 3535 | IF ( host(1:3) == 'ibm' ) THEN |
---|
| 3536 | termination_time_needed = 300.0 |
---|
| 3537 | ELSE |
---|
| 3538 | termination_time_needed = 35.0 |
---|
| 3539 | ENDIF |
---|
| 3540 | ENDIF |
---|
| 3541 | |
---|
| 3542 | ! |
---|
| 3543 | !-- Check the time needed to terminate a model run |
---|
| 3544 | IF ( host(1:3) == 't3e' ) THEN |
---|
| 3545 | ! |
---|
| 3546 | !-- Time needed must be at least 30 seconds on all CRAY machines, because |
---|
| 3547 | !-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds |
---|
| 3548 | IF ( termination_time_needed <= 30.0 ) THEN |
---|
[215] | 3549 | WRITE( message_string, * ) 'termination_time_needed = ', & |
---|
| 3550 | termination_time_needed, ' must be > 30.0 on host "', & |
---|
| 3551 | TRIM( host ), '"' |
---|
[226] | 3552 | CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 ) |
---|
[1] | 3553 | ENDIF |
---|
| 3554 | ELSEIF ( host(1:3) == 'ibm' ) THEN |
---|
| 3555 | ! |
---|
| 3556 | !-- On IBM-regatta machines the time should be at least 300 seconds, |
---|
| 3557 | !-- because the job time consumed before executing palm (for compiling, |
---|
| 3558 | !-- copying of files, etc.) has to be regarded |
---|
| 3559 | IF ( termination_time_needed < 300.0 ) THEN |
---|
[215] | 3560 | WRITE( message_string, * ) 'termination_time_needed = ', & |
---|
| 3561 | termination_time_needed, ' should be >= 300.0 on host "', & |
---|
| 3562 | TRIM( host ), '"' |
---|
[226] | 3563 | CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 ) |
---|
[1] | 3564 | ENDIF |
---|
| 3565 | ENDIF |
---|
| 3566 | |
---|
[217] | 3567 | ! |
---|
[240] | 3568 | !-- Check pressure gradient conditions |
---|
| 3569 | IF ( dp_external .AND. conserve_volume_flow ) THEN |
---|
[388] | 3570 | WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', & |
---|
| 3571 | 'w are .TRUE. but one of them must be .FALSE.' |
---|
[240] | 3572 | CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 ) |
---|
| 3573 | ENDIF |
---|
| 3574 | IF ( dp_external ) THEN |
---|
| 3575 | IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN |
---|
| 3576 | WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', & |
---|
| 3577 | ' of range' |
---|
| 3578 | CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 ) |
---|
| 3579 | ENDIF |
---|
| 3580 | IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN |
---|
[388] | 3581 | WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', & |
---|
| 3582 | 'ro, i.e. the external pressure gradient & will not be applied' |
---|
[240] | 3583 | CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 ) |
---|
| 3584 | ENDIF |
---|
| 3585 | ENDIF |
---|
| 3586 | IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN |
---|
| 3587 | WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', & |
---|
| 3588 | '.FALSE., i.e. the external pressure gradient & will not be applied' |
---|
| 3589 | CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 ) |
---|
| 3590 | ENDIF |
---|
[241] | 3591 | IF ( conserve_volume_flow ) THEN |
---|
| 3592 | IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN |
---|
[667] | 3593 | |
---|
| 3594 | conserve_volume_flow_mode = 'initial_profiles' |
---|
| 3595 | |
---|
[241] | 3596 | ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. & |
---|
| 3597 | TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. & |
---|
| 3598 | TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN |
---|
| 3599 | WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', & |
---|
| 3600 | conserve_volume_flow_mode |
---|
| 3601 | CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 ) |
---|
| 3602 | ENDIF |
---|
[667] | 3603 | IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. & |
---|
| 3604 | TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN |
---|
| 3605 | WRITE( message_string, * ) 'non-cyclic boundary conditions ', & |
---|
| 3606 | 'require conserve_volume_flow_mode = ''initial_profiles''' |
---|
[241] | 3607 | CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 ) |
---|
| 3608 | ENDIF |
---|
| 3609 | IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. & |
---|
| 3610 | TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN |
---|
| 3611 | WRITE( message_string, * ) 'cyclic boundary conditions ', & |
---|
[667] | 3612 | 'require conserve_volume_flow_mode = ''initial_profiles''', & |
---|
[241] | 3613 | ' or ''bulk_velocity''' |
---|
| 3614 | CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 ) |
---|
| 3615 | ENDIF |
---|
| 3616 | ENDIF |
---|
| 3617 | IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. & |
---|
| 3618 | ( .NOT. conserve_volume_flow .OR. & |
---|
| 3619 | TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN |
---|
| 3620 | WRITE( message_string, * ) 'nonzero bulk velocity requires ', & |
---|
[667] | 3621 | 'conserve_volume_flow = .T. and ', & |
---|
[241] | 3622 | 'conserve_volume_flow_mode = ''bulk_velocity''' |
---|
| 3623 | CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 ) |
---|
| 3624 | ENDIF |
---|
[240] | 3625 | |
---|
| 3626 | ! |
---|
[264] | 3627 | !-- Check particle attributes |
---|
| 3628 | IF ( particle_color /= 'none' ) THEN |
---|
| 3629 | IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. & |
---|
| 3630 | particle_color /= 'z' ) THEN |
---|
| 3631 | message_string = 'illegal value for parameter particle_color: ' // & |
---|
| 3632 | TRIM( particle_color) |
---|
| 3633 | CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 ) |
---|
| 3634 | ELSE |
---|
| 3635 | IF ( color_interval(2) <= color_interval(1) ) THEN |
---|
| 3636 | message_string = 'color_interval(2) <= color_interval(1)' |
---|
| 3637 | CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 ) |
---|
| 3638 | ENDIF |
---|
| 3639 | ENDIF |
---|
| 3640 | ENDIF |
---|
| 3641 | |
---|
| 3642 | IF ( particle_dvrpsize /= 'none' ) THEN |
---|
| 3643 | IF ( particle_dvrpsize /= 'absw' ) THEN |
---|
| 3644 | message_string = 'illegal value for parameter particle_dvrpsize:' // & |
---|
| 3645 | ' ' // TRIM( particle_color) |
---|
| 3646 | CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 ) |
---|
| 3647 | ELSE |
---|
| 3648 | IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN |
---|
| 3649 | message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)' |
---|
| 3650 | CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 ) |
---|
| 3651 | ENDIF |
---|
| 3652 | ENDIF |
---|
| 3653 | ENDIF |
---|
| 3654 | |
---|
| 3655 | ! |
---|
[1241] | 3656 | !-- Check nudging and large scale forcing from external file |
---|
| 3657 | IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN |
---|
| 3658 | message_string = 'Nudging requires large_scale_forcing = .T.. &'// & |
---|
| 3659 | 'Surface fluxes and geostrophic wind should be &'// & |
---|
| 3660 | 'prescribed in file LSF_DATA' |
---|
| 3661 | CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 ) |
---|
| 3662 | ENDIF |
---|
| 3663 | |
---|
| 3664 | IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. & |
---|
| 3665 | bc_ns /= 'cyclic' ) ) THEN |
---|
| 3666 | message_string = 'Non-cyclic lateral boundaries do not allow for &' // & |
---|
| 3667 | 'the usage of large scale forcing from external file.' |
---|
| 3668 | CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 ) |
---|
| 3669 | ENDIF |
---|
| 3670 | |
---|
| 3671 | IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN |
---|
| 3672 | message_string = 'The usage of large scale forcing from external &'//& |
---|
| 3673 | 'file LSF_DATA requires humidity = .T..' |
---|
| 3674 | CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 ) |
---|
| 3675 | ENDIF |
---|
| 3676 | |
---|
| 3677 | IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN |
---|
| 3678 | message_string = 'The usage of large scale forcing from external &'//& |
---|
| 3679 | 'file LSF_DATA is not implemented for non-flat topography' |
---|
| 3680 | CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 ) |
---|
| 3681 | ENDIF |
---|
| 3682 | |
---|
| 3683 | IF ( large_scale_forcing .AND. ocean ) THEN |
---|
| 3684 | message_string = 'The usage of large scale forcing from external &'//& |
---|
| 3685 | 'file LSF_DATA is not implemented for ocean runs' |
---|
| 3686 | CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 ) |
---|
| 3687 | ENDIF |
---|
| 3688 | ! |
---|
[217] | 3689 | !-- Check &userpar parameters |
---|
| 3690 | CALL user_check_parameters |
---|
[1] | 3691 | |
---|
[217] | 3692 | |
---|
[667] | 3693 | |
---|
[1] | 3694 | END SUBROUTINE check_parameters |
---|