Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1274

Last change on this file since 1274 was 1242, checked in by heinze, 11 years ago
Last commmit documented
Property svn:keywords set to `Id`
File size: 143.1 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1242]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1242 2013-10-30 11:50:11Z heinze $
	27	!
	28	! 1241 2013-10-30 11:36:58Z heinze
[1241]	29	! output for profiles of ug and vg added
	30	! set surface_heatflux and surface_waterflux also in dependence on
	31	! large_scale_forcing
	32	! checks for nudging and large scale forcing from external file
[1054]	33	!
[1237]	34	! 1236 2013-09-27 07:21:13Z raasch
	35	! check number of spectra levels
	36	!
[1217]	37	! 1216 2013-08-26 09:31:42Z raasch
	38	! check for transpose_compute_overlap (temporary)
	39	!
[1215]	40	! 1214 2013-08-21 12:29:17Z kanani
	41	! additional check for simultaneous use of vertical grid stretching
	42	! and particle advection
	43	!
[1213]	44	! 1212 2013-08-15 08:46:27Z raasch
	45	! checks for poisfft_hybrid removed
	46	!
[1211]	47	! 1210 2013-08-14 10:58:20Z raasch
	48	! check for fftw
	49	!
[1182]	50	! 1179 2013-06-14 05:57:58Z raasch
	51	! checks and settings of buoyancy parameters and switches revised,
	52	! initial profile for rho added to hom (id=77)
	53	!
[1175]	54	! 1174 2013-05-31 10:28:08Z gryschka
	55	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
	56	!
[1160]	57	! 1159 2013-05-21 11:58:22Z fricke
	58	! bc_lr/ns_dirneu/neudir removed
	59	!
[1116]	60	! 1115 2013-03-26 18:16:16Z hoffmann
	61	! unused variables removed
	62	! drizzle can be used without precipitation
	63	!
[1112]	64	! 1111 2013-03-08 23:54:10Z raasch
	65	! ibc_p_b = 2 removed
	66	!
[1104]	67	! 1103 2013-02-20 02:15:53Z raasch
	68	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
	69	!
[1093]	70	! 1092 2013-02-02 11:24:22Z raasch
	71	! unused variables removed
	72	!
[1070]	73	! 1069 2012-11-28 16:18:43Z maronga
	74	! allow usage of topography in combination with cloud physics
	75	!
[1066]	76	! 1065 2012-11-22 17:42:36Z hoffmann
	77	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	78	! precipitation in order to save computational resources.
	79	!
[1061]	80	! 1060 2012-11-21 07:19:51Z raasch
	81	! additional check for parameter turbulent_inflow
	82	!
[1054]	83	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	84	! necessary changes for the new two-moment cloud physics scheme added:
	85	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	86	! - plant_canopy is not allowed
	87	! - currently, only cache loop_optimization is allowed
	88	! - initial profiles of nr, qr
	89	! - boundary condition of nr, qr
	90	! - check output quantities (qr, nr, prr)
[979]	91	!
[1037]	92	! 1036 2012-10-22 13:43:42Z raasch
	93	! code put under GPL (PALM 3.9)
	94	!
[1035]	95	! 1031/1034 2012-10-22 11:32:49Z raasch
	96	! check of netcdf4 parallel file support
	97	!
[1020]	98	! 1019 2012-09-28 06:46:45Z raasch
	99	! non-optimized version of prognostic_equations not allowed any more
	100	!
[1017]	101	! 1015 2012-09-27 09:23:24Z raasch
	102	! acc allowed for loop optimization,
	103	! checks for adjustment of mixing length to the Prandtl mixing length removed
	104	!
[1004]	105	! 1003 2012-09-14 14:35:53Z raasch
	106	! checks for cases with unequal subdomain sizes removed
	107	!
[1002]	108	! 1001 2012-09-13 14:08:46Z raasch
	109	! all actions concerning leapfrog- and upstream-spline-scheme removed
	110	!
[997]	111	! 996 2012-09-07 10:41:47Z raasch
	112	! little reformatting
[1001]	113
[979]	114	! 978 2012-08-09 08:28:32Z fricke
[978]	115	! setting of bc_lr/ns_dirneu/neudir
	116	! outflow damping layer removed
	117	! check for z0h*
	118	! check for pt_damping_width
[667]	119	!
[965]	120	! 964 2012-07-26 09:14:24Z raasch
	121	! check of old profil-parameters removed
	122	!
[941]	123	! 940 2012-07-09 14:31:00Z raasch
	124	! checks for parameter neutral
	125	!
[925]	126	! 924 2012-06-06 07:44:41Z maronga
	127	! Bugfix: preprocessor directives caused error during compilation
	128	!
[893]	129	! 892 2012-05-02 13:51:44Z maronga
	130	! Bugfix for parameter file check ( excluding __netcdf4 )
	131	!
[867]	132	! 866 2012-03-28 06:44:41Z raasch
	133	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	134	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	135	! timestep
	136	!
[863]	137	! 861 2012-03-26 14:18:34Z suehring
	138	! Check for topography and ws-scheme removed.
	139	! Check for loop_optimization = 'vector' and ws-scheme removed.
	140	!
[846]	141	! 845 2012-03-07 10:23:05Z maronga
	142	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	143	!
[829]	144	! 828 2012-02-21 12:00:36Z raasch
	145	! check of collision_kernel extended
	146	!
[826]	147	! 825 2012-02-19 03:03:44Z raasch
	148	! check for collision_kernel and curvature_solution_effects
	149	!
[810]	150	! 809 2012-01-30 13:32:58Z maronga
	151	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	152	!
[808]	153	! 807 2012-01-25 11:53:51Z maronga
	154	! New cpp directive "__check" implemented which is used by check_namelist_files
	155	!
[775]	156	! 774 2011-10-27 13:34:16Z letzel
	157	! bugfix for prescribed u,v-profiles
	158	!
[768]	159	! 767 2011-10-14 06:39:12Z raasch
	160	! Calculating u,v-profiles from given profiles by linear interpolation.
	161	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	162	!
[708]	163	! 707 2011-03-29 11:39:40Z raasch
	164	! setting of bc_lr/ns_dirrad/raddir
	165	!
	166	! 689 2011-02-20 19:31:12z gryschka
[690]	167	! Bugfix for some logical expressions
	168	! (syntax was not compatible with all compilers)
[687]	169	!
[690]	170	! 680 2011-02-04 23:16:06Z gryschka
[681]	171	! init_vortex is not allowed with volume_flow_control
[668]	172	!
[674]	173	! 673 2011-01-18 16:19:48Z suehring
	174	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	175	!
[668]	176	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	177	! Exchange of parameters between ocean and atmosphere via PE0
	178	! Check for illegal combination of ws-scheme and timestep scheme.
	179	! Check for topography and ws-scheme.
	180	! Check for not cyclic boundary conditions in combination with ws-scheme and
	181	! loop_optimization = 'vector'.
	182	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	183	! Different processor/grid topology in atmosphere and ocean is now allowed!
	184	! Bugfixes in checking for conserve_volume_flow_mode
[601]	185	! 600 2010-11-24 16:10:51Z raasch
	186	! change due to new default value of surface_waterflux
[581]	187	! 580 2010-10-05 13:59:11Z heinze
[601]	188	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	189	!
[568]	190	! 567 2010-10-01 10:46:30Z helmke
	191	! calculating masks changed
	192	!
[565]	193	! 564 2010-09-30 13:18:59Z helmke
	194	! palm message identifiers of masked output changed, 20 replaced by max_masks
	195	!
[554]	196	! 553 2010-09-01 14:09:06Z weinreis
	197	! masks is calculated and removed from inipar
[532]	198	!
	199	! 531 2010-04-21 06:47:21Z heinze
	200	! Bugfix: unit of hyp changed to dbar
[392]	201	!
[525]	202	! 524 2010-03-30 02:04:51Z raasch
	203	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	204	!
[494]	205	! 493 2010-03-01 08:30:24Z raasch
	206	! netcdf_data_format is checked
	207	!
[449]	208	! 411 2009-12-11 14:15:58Z heinze
	209	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	210	! Initialization of large scale vertical motion (subsidence/ascent)
	211	!
	212	! 410 2009-12-04 17:05:40Z letzel
	213	! masked data output
	214	!
[392]	215	! 388 2009-09-23 09:40:33Z raasch
[388]	216	! Check profiles fpr prho and hyp.
[376]	217	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	218	! interval has been set, respective error message is included
[366]	219	! bc_lr_cyc and bc_ns_cyc are set,
[328]	220	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	221	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	222	! Coupling with independent precursor runs.
[264]	223	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	224	! Bugfix: pressure included for profile output
[240]	225	! Check pressure gradient conditions
[256]	226	! topography_grid_convention moved from user_check_parameters
	227	! 'single_street_canyon'
[367]	228	! Added shf* and qsws* to the list of available output data
[226]	229	!
	230	! 222 2009-01-12 16:04:16Z letzel
[217]	231	! +user_check_parameters
[213]	232	! Output of messages replaced by message handling routine.
[206]	233	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	234	! deleted __mpi2 directives
[222]	235	! Check that PALM is called with mrun -K parallel for coupling
[198]	236	!
	237	! 197 2008-09-16 15:29:03Z raasch
[177]	238	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	239	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	240	!
	241	! Strict grid matching along z is not needed for mg-solver.
[153]	242	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	243	! Case of reading data for recycling included in initializing_actions,
[197]	244	! check of turbulent_inflow and calculation of recycling_plane.
	245	! q*2 profile added
[139]	246	!
	247	! 138 2007-11-28 10:03:58Z letzel
[138]	248	! Plant canopy added
[132]	249	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	250	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	251	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	252	!
	253	! 109 2007-08-28 15:26:47Z letzel
[102]	254	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	255	! conditions for temperature and fluxes) in case of coupled runs.
	256	! +profiles for wp and w"e
[104]	257	! Bugfix: Error message concerning output of particle concentration (pc)
	258	! modified
[108]	259	! More checks and more default values for coupled runs
	260	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	261	! cloud_physics = .T.)
	262	! Rayleigh damping for ocean fixed.
[109]	263	! Check and, if necessary, set default value for dt_coupling
[98]	264	!
	265	! 97 2007-06-21 08:23:15Z raasch
[97]	266	! Initial salinity profile is calculated, salinity boundary conditions are
	267	! checked,
[94]	268	! z_max_do1d is checked only in case of ocean = .f.,
[97]	269	! +initial temperature and geostrophic velocity profiles for the ocean version,
	270	! use_pt_reference renamed use_reference
[77]	271	!
[90]	272	! 89 2007-05-25 12:08:31Z raasch
	273	! Check for user-defined profiles
	274	!
[77]	275	! 75 2007-03-22 09:54:05Z raasch
[51]	276	! "by_user" allowed as initializing action, -data_output_ts,
[63]	277	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	278	! and pt_reference are checked, moisture renamed humidity,
[72]	279	! output of precipitation amount/rate and roughnes length + check
[73]	280	! possible negative humidities are avoided in initial profile,
[75]	281	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	282	! revision added to run_description_header
[1]	283	!
[39]	284	! 20 2007-02-26 00:12:32Z raasch
	285	! Temperature and humidity gradients at top are now calculated for nzt+1,
	286	! top_heatflux and respective boundary condition bc_pt_t is checked
	287	!
[3]	288	! RCS Log replace by Id keyword, revision history cleaned up
	289	!
[1]	290	! Revision 1.61 2006/08/04 14:20:25 raasch
	291	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	292	! use_upstream_for_tke, default value for dt_dopts,
	293	! generation of file header moved from routines palm and header to here
	294	!
	295	! Revision 1.1 1997/08/26 06:29:23 raasch
	296	! Initial revision
	297	!
	298	!
	299	! Description:
	300	! ------------
	301	! Check control parameters and deduce further quantities.
	302	!------------------------------------------------------------------------------!
	303
	304	USE arrays_3d
[824]	305	USE cloud_parameters
[1]	306	USE constants
	307	USE control_parameters
[264]	308	USE dvrp_variables
[1]	309	USE grid_variables
	310	USE indices
	311	USE model_1d
	312	USE netcdf_control
	313	USE particle_attributes
	314	USE pegrid
	315	USE profil_parameter
[1236]	316	USE spectrum
	317	USE statistics
[411]	318	USE subsidence_mod
[1241]	319	USE statistics
[1]	320	USE transpose_indices
	321
	322	IMPLICIT NONE
	323
	324	CHARACTER (LEN=1) :: sq
	325	CHARACTER (LEN=6) :: var
	326	CHARACTER (LEN=7) :: unit
	327	CHARACTER (LEN=8) :: date
	328	CHARACTER (LEN=10) :: time
[102]	329	CHARACTER (LEN=40) :: coupling_string
[1]	330	CHARACTER (LEN=100) :: action
	331
[1092]	332	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	333	LOGICAL :: found, ldum
[1092]	334	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	335
	336	!
[1216]	337	!-- Check for overlap combinations, which are not realized yet
	338	IF ( transpose_compute_overlap ) THEN
	339	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
	340	#if defined( __openacc )
	341	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
	342	#endif
	343	ENDIF
	344
	345	!
[1]	346	!-- Warning, if host is not set
	347	IF ( host(1:1) == ' ' ) THEN
[213]	348	message_string = '"host" is not set. Please check that environment ' // &
	349	'variable "localhost" & is set before running PALM'
[226]	350	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	351	ENDIF
	352
	353	!
[102]	354	!-- Check the coupling mode
	355	IF ( coupling_mode /= 'uncoupled' .AND. &
	356	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	357	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	358	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	359	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	360	ENDIF
	361
	362	!
[108]	363	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	364	IF ( coupling_mode /= 'uncoupled') THEN
[213]	365
[108]	366	IF ( dt_coupling == 9999999.9 ) THEN
[213]	367	message_string = 'dt_coupling is not set but required for coup' // &
	368	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	369	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	370	ENDIF
[213]	371
[206]	372	#if defined( __parallel )
[807]	373
	374	!
	375	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	376	!-- program.
	377	!-- check_namelist_files will need the following information of the other
	378	!-- model (atmosphere/ocean).
[845]	379	! dt_coupling = remote
	380	! dt_max = remote
	381	! restart_time = remote
	382	! dt_restart= remote
	383	! simulation_time_since_reference = remote
	384	! dx = remote
[807]	385
	386
[809]	387	#if ! defined( __check )
[667]	388	IF ( myid == 0 ) THEN
	389	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	390	ierr )
	391	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	392	status, ierr )
	393	ENDIF
	394	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	395	#endif
[108]	396	IF ( dt_coupling /= remote ) THEN
[213]	397	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	398	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	399	'dt_coupling_remote = ', remote
[226]	400	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	401	ENDIF
[109]	402	IF ( dt_coupling <= 0.0 ) THEN
[809]	403	#if ! defined( __check )
[667]	404	IF ( myid == 0 ) THEN
	405	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	406	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	407	status, ierr )
	408	ENDIF
	409	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	410	#endif
[109]	411	dt_coupling = MAX( dt_max, remote )
[213]	412	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	413	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	414	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	415	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	416	ENDIF
[809]	417	#if ! defined( __check )
[667]	418	IF ( myid == 0 ) THEN
	419	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	420	ierr )
	421	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	422	status, ierr )
	423	ENDIF
	424	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	425	#endif
[108]	426	IF ( restart_time /= remote ) THEN
[213]	427	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	428	'": restart_time = ', restart_time, '& is not equal to ', &
	429	'restart_time_remote = ', remote
[226]	430	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	431	ENDIF
[809]	432	#if ! defined( __check )
[667]	433	IF ( myid == 0 ) THEN
	434	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	435	ierr )
	436	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	437	status, ierr )
	438	ENDIF
	439	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	440	#endif
[108]	441	IF ( dt_restart /= remote ) THEN
[213]	442	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	443	'": dt_restart = ', dt_restart, '& is not equal to ', &
	444	'dt_restart_remote = ', remote
[226]	445	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	446	ENDIF
[213]	447
[291]	448	simulation_time_since_reference = end_time - coupling_start_time
[809]	449	#if ! defined( __check )
[667]	450	IF ( myid == 0 ) THEN
	451	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	452	14, comm_inter, ierr )
	453	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	454	status, ierr )
	455	ENDIF
	456	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	457	#endif
[291]	458	IF ( simulation_time_since_reference /= remote ) THEN
[213]	459	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	460	'": simulation_time_since_reference = ', &
	461	simulation_time_since_reference, '& is not equal to ', &
	462	'simulation_time_since_reference_remote = ', remote
[226]	463	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	464	ENDIF
[213]	465
[809]	466	#if ! defined( __check )
[667]	467	IF ( myid == 0 ) THEN
	468	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	469	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	470	status, ierr )
[108]	471	ENDIF
[667]	472	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	473
[807]	474	#endif
[667]	475	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	476
	477	IF ( dx < remote ) THEN
	478	WRITE( message_string, * ) 'coupling mode "', &
	479	TRIM( coupling_mode ), &
	480	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	481	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	482	ENDIF
	483
	484	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	485	WRITE( message_string, * ) 'coupling mode "', &
	486	TRIM( coupling_mode ), &
	487	'": Domain size in x-direction is not equal in ocean and atmosphere'
	488	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	489	ENDIF
	490
[108]	491	ENDIF
[213]	492
[809]	493	#if ! defined( __check )
[667]	494	IF ( myid == 0) THEN
	495	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	496	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	497	status, ierr )
[108]	498	ENDIF
[667]	499	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	500	#endif
[667]	501	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	502
	503	IF ( dy < remote ) THEN
	504	WRITE( message_string, * ) 'coupling mode "', &
	505	TRIM( coupling_mode ), &
	506	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	507	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	508	ENDIF
	509
	510	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	511	WRITE( message_string, * ) 'coupling mode "', &
	512	TRIM( coupling_mode ), &
	513	'": Domain size in y-direction is not equal in ocean and atmosphere'
	514	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	515	ENDIF
	516
	517	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	518	WRITE( message_string, * ) 'coupling mode "', &
	519	TRIM( coupling_mode ), &
	520	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	521	' atmosphere'
	522	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	523	ENDIF
	524
	525	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	526	WRITE( message_string, * ) 'coupling mode "', &
	527	TRIM( coupling_mode ), &
	528	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	529	' atmosphere'
	530	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	531	ENDIF
	532
[108]	533	ENDIF
[222]	534	#else
	535	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	536	' ''mrun -K parallel'''
[226]	537	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	538	#endif
	539	ENDIF
	540
[809]	541	#if defined( __parallel ) && ! defined ( __check )
[108]	542	!
	543	!-- Exchange via intercommunicator
[667]	544	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	545	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	546	ierr )
[667]	547	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	548	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	549	comm_inter, status, ierr )
[108]	550	ENDIF
[667]	551	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	552
[108]	553	#endif
	554
	555
	556	!
[1]	557	!-- Generate the file header which is used as a header for most of PALM's
	558	!-- output files
	559	CALL DATE_AND_TIME( date, time )
	560	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	561	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	562	IF ( coupling_mode == 'uncoupled' ) THEN
	563	coupling_string = ''
	564	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	565	coupling_string = ' coupled (atmosphere)'
	566	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	567	coupling_string = ' coupled (ocean)'
	568	ENDIF
[1]	569
[102]	570	WRITE ( run_description_header, &
	571	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	572	TRIM( version ), TRIM( revision ), 'run: ', &
	573	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	574	'host: ', TRIM( host ), run_date, run_time
[1]	575
	576	!
[63]	577	!-- Check the general loop optimization method
	578	IF ( loop_optimization == 'default' ) THEN
	579	IF ( host(1:3) == 'nec' ) THEN
	580	loop_optimization = 'vector'
	581	ELSE
	582	loop_optimization = 'cache'
	583	ENDIF
	584	ENDIF
	585
[1015]	586	SELECT CASE ( TRIM( loop_optimization ) )
	587
[1019]	588	CASE ( 'acc', 'cache', 'vector' )
[1015]	589	CONTINUE
	590
	591	CASE DEFAULT
	592	message_string = 'illegal value given for loop_optimization: "' // &
	593	TRIM( loop_optimization ) // '"'
	594	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	595
	596	END SELECT
	597
[63]	598	!
[1214]	599	!-- Check if vertical grid stretching is used together with particles
	600	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
	601	message_string = 'Vertical grid stretching is not allowed together ' // &
	602	'with particle advection.'
	603	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
	604	ENDIF
	605
	606	!
[1]	607	!-- Check topography setting (check for illegal parameter combinations)
	608	IF ( topography /= 'flat' ) THEN
	609	action = ' '
[861]	610	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	611	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	612	ENDIF
[861]	613	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	614	THEN
[1]	615	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	616	ENDIF
[114]	617	IF ( psolver == 'sor' ) THEN
[1]	618	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	619	ENDIF
	620	IF ( sloping_surface ) THEN
	621	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	622	ENDIF
	623	IF ( galilei_transformation ) THEN
	624	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	625	ENDIF
[1115]	626	IF ( cloud_physics ) THEN
	627	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	628	ENDIF
[1]	629	IF ( cloud_droplets ) THEN
[1115]	630	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
[1]	631	ENDIF
	632	IF ( .NOT. prandtl_layer ) THEN
	633	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	634	ENDIF
	635	IF ( action /= ' ' ) THEN
[213]	636	message_string = 'a non-flat topography does not allow ' // &
	637	TRIM( action )
[226]	638	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	639	ENDIF
[256]	640	!
	641	!-- In case of non-flat topography, check whether the convention how to
	642	!-- define the topography grid has been set correctly, or whether the default
	643	!-- is applicable. If this is not possible, abort.
	644	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	645	IF ( TRIM( topography ) /= 'single_building' .AND. &
	646	TRIM( topography ) /= 'single_street_canyon' .AND. &
	647	TRIM( topography ) /= 'read_from_file' ) THEN
	648	!-- The default value is not applicable here, because it is only valid
	649	!-- for the two standard cases 'single_building' and 'read_from_file'
	650	!-- defined in init_grid.
	651	WRITE( message_string, * ) &
	652	'The value for "topography_grid_convention" ', &
	653	'is not set. Its default value is & only valid for ', &
	654	'"topography" = ''single_building'', ', &
	655	'''single_street_canyon'' & or ''read_from_file''.', &
	656	' & Choose ''cell_edge'' or ''cell_center''.'
	657	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	658	ELSE
	659	!-- The default value is applicable here.
	660	!-- Set convention according to topography.
	661	IF ( TRIM( topography ) == 'single_building' .OR. &
	662	TRIM( topography ) == 'single_street_canyon' ) THEN
	663	topography_grid_convention = 'cell_edge'
	664	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	665	topography_grid_convention = 'cell_center'
	666	ENDIF
	667	ENDIF
	668	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	669	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	670	WRITE( message_string, * ) &
	671	'The value for "topography_grid_convention" is ', &
	672	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	673	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	674	ENDIF
	675
[1]	676	ENDIF
[94]	677
[1]	678	!
[94]	679	!-- Check ocean setting
	680	IF ( ocean ) THEN
[332]	681
[94]	682	action = ' '
	683	IF ( action /= ' ' ) THEN
[213]	684	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	685	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	686	ENDIF
	687
[332]	688	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	689	TRIM( coupling_char ) == '_O' ) THEN
[343]	690
[94]	691	!
[332]	692	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	693	!-- ocean run (this setting is done via mrun-option -y)
[343]	694
[291]	695	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	696	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	697	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	698
[291]	699	ENDIF
	700	!
[1053]	701	!-- Check cloud scheme
	702	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	703	icloud_scheme = 0
	704	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	705	icloud_scheme = 1
	706	ELSE
	707	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	708	TRIM( cloud_scheme ) // '"'
	709	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	710	ENDIF
	711	!
[1]	712	!-- Check whether there are any illegal values
	713	!-- Pressure solver:
[1212]	714	IF ( psolver /= 'poisfft' .AND. &
[1]	715	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	716	message_string = 'unknown solver for perturbation pressure: psolver' // &
	717	' = "' // TRIM( psolver ) // '"'
[226]	718	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	719	ENDIF
	720
	721	IF ( psolver == 'multigrid' ) THEN
	722	IF ( cycle_mg == 'w' ) THEN
	723	gamma_mg = 2
	724	ELSEIF ( cycle_mg == 'v' ) THEN
	725	gamma_mg = 1
	726	ELSE
[213]	727	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	728	TRIM( cycle_mg ) // '"'
[226]	729	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	730	ENDIF
	731	ENDIF
	732
	733	IF ( fft_method /= 'singleton-algorithm' .AND. &
	734	fft_method /= 'temperton-algorithm' .AND. &
[1210]	735	fft_method /= 'fftw' .AND. &
[1]	736	fft_method /= 'system-specific' ) THEN
[213]	737	message_string = 'unknown fft-algorithm: fft_method = "' // &
	738	TRIM( fft_method ) // '"'
[226]	739	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	740	ENDIF
[667]	741
	742	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	743	.NOT. call_psolver_at_all_substeps ) THEN
[667]	744	message_string = 'psolver must be called at each RK3 substep when "'//&
	745	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	746	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	747	END IF
[1]	748	!
	749	!-- Advection schemes:
[1001]	750	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	751	THEN
[214]	752	message_string = 'unknown advection scheme: momentum_advec = "' // &
	753	TRIM( momentum_advec ) // '"'
[226]	754	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	755	ENDIF
[1001]	756	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	757	.AND. ( timestep_scheme == 'euler' .OR. &
	758	timestep_scheme == 'runge-kutta-2' ) ) &
	759	THEN
[667]	760	message_string = 'momentum_advec or scalar_advec = "' &
	761	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	762	TRIM( timestep_scheme ) // '"'
[226]	763	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	764	ENDIF
[667]	765	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	766	scalar_advec /= 'bc-scheme' ) &
	767	THEN
[214]	768	message_string = 'unknown advection scheme: scalar_advec = "' // &
	769	TRIM( scalar_advec ) // '"'
[226]	770	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	771	ENDIF
[1019]	772	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	773	THEN
	774	message_string = 'advection_scheme scalar_advec = "' &
	775	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	776	TRIM( loop_optimization ) // '"'
	777	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	778	ENDIF
[1]	779
	780	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	781	use_upstream_for_tke = .TRUE.
[214]	782	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	783	'use_sgs_for_particles = .TRUE.'
[226]	784	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	785	ENDIF
	786
[824]	787	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	788	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	789	'curvature_solution_effects = .TRUE.'
	790	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	791	ENDIF
	792
[1]	793	!
[1019]	794	!-- Set LOGICAL switches to enhance performance
	795	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	796	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	797
	798	!
[1]	799	!-- Timestep schemes:
	800	SELECT CASE ( TRIM( timestep_scheme ) )
	801
	802	CASE ( 'euler' )
	803	intermediate_timestep_count_max = 1
	804
	805	CASE ( 'runge-kutta-2' )
	806	intermediate_timestep_count_max = 2
	807
	808	CASE ( 'runge-kutta-3' )
	809	intermediate_timestep_count_max = 3
	810
	811	CASE DEFAULT
[214]	812	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	813	TRIM( timestep_scheme ) // '"'
[226]	814	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	815
	816	END SELECT
	817
[667]	818	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	819	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	820	message_string = 'momentum advection scheme "' // &
	821	TRIM( momentum_advec ) // '" & does not work with ' // &
	822	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	823	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	824	ENDIF
	825
[825]	826	!
	827	!-- Collision kernels:
	828	SELECT CASE ( TRIM( collision_kernel ) )
	829
[828]	830	CASE ( 'hall', 'hall_fast' )
[825]	831	hall_kernel = .TRUE.
	832
	833	CASE ( 'palm' )
	834	palm_kernel = .TRUE.
	835
[828]	836	CASE ( 'wang', 'wang_fast' )
[825]	837	wang_kernel = .TRUE.
	838
	839	CASE ( 'none' )
	840
	841
	842	CASE DEFAULT
	843	message_string = 'unknown collision kernel: collision_kernel = "' // &
	844	TRIM( collision_kernel ) // '"'
	845	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	846
	847	END SELECT
[828]	848	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	849
[147]	850	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	851	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	852	!
[214]	853	!-- No restart run: several initialising actions are possible
[1]	854	action = initializing_actions
	855	DO WHILE ( TRIM( action ) /= '' )
	856	position = INDEX( action, ' ' )
	857	SELECT CASE ( action(1:position-1) )
	858
	859	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	860	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	861	action = action(position+1:)
	862
	863	CASE DEFAULT
[214]	864	message_string = 'initializing_action = "' // &
	865	TRIM( action ) // '" unkown or not allowed'
[226]	866	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	867
	868	END SELECT
	869	ENDDO
	870	ENDIF
[214]	871
[680]	872	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	873	conserve_volume_flow ) THEN
	874	message_string = 'initializing_actions = "initialize_vortex"' // &
	875	' ist not allowed with conserve_volume_flow = .T.'
	876	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	877	ENDIF
	878
	879
[1]	880	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	881	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	882	message_string = 'initializing_actions = "set_constant_profiles"' // &
	883	' and "set_1d-model_profiles" are not allowed ' // &
	884	'simultaneously'
[226]	885	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	886	ENDIF
[214]	887
[46]	888	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	889	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	890	message_string = 'initializing_actions = "set_constant_profiles"' // &
	891	' and "by_user" are not allowed simultaneously'
[226]	892	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	893	ENDIF
[214]	894
[46]	895	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	896	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	897	message_string = 'initializing_actions = "by_user" and ' // &
	898	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	899	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	900	ENDIF
[1]	901
[75]	902	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	903	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	904	'not allowed with humidity = ', humidity
[226]	905	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	906	ENDIF
	907
[72]	908	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	909	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	910	'not allowed with cloud_physics = ', cloud_physics
[226]	911	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	912	ENDIF
	913
[75]	914	IF ( humidity .AND. sloping_surface ) THEN
[214]	915	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	916	'are not allowed simultaneously'
[226]	917	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	918	ENDIF
	919
[75]	920	IF ( passive_scalar .AND. humidity ) THEN
[214]	921	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	922	'is not allowed simultaneously'
[226]	923	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	924	ENDIF
	925
[138]	926	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	927	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	928	'coefficient & given value is drag_coefficient = 0.0'
[226]	929	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	930	ENDIF
	931
[1053]	932	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	933	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	934	' seifert_beheng'
	935	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	936	ENDIF
	937
	938	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	939	icloud_scheme == 0 ) THEN
	940	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	941	'loop_optimization = cache'
	942	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	943	ENDIF
	944
[1115]	945	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	946	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
	947	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
	948	! 'precipitation = .TRUE. or drizzle = .TRUE.'
	949	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	950	! ENDIF
[1065]	951
[1]	952	!
	953	!-- In case of no model continuation run, check initialising parameters and
	954	!-- deduce further quantities
	955	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	956
	957	!
[767]	958	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	959	pt_init = pt_surface
[1053]	960	IF ( humidity ) THEN
	961	q_init = q_surface
	962	ENDIF
[94]	963	IF ( ocean ) sa_init = sa_surface
	964	IF ( passive_scalar ) q_init = s_surface
[138]	965	IF ( plant_canopy ) lad = 0.0
[1]	966
	967	!
	968	!--
	969	!-- If required, compute initial profile of the geostrophic wind
	970	!-- (component ug)
	971	i = 1
	972	gradient = 0.0
[97]	973
	974	IF ( .NOT. ocean ) THEN
	975
	976	ug_vertical_gradient_level_ind(1) = 0
	977	ug(0) = ug_surface
	978	DO k = 1, nzt+1
[177]	979	IF ( i < 11 ) THEN
	980	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	981	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	982	gradient = ug_vertical_gradient(i) / 100.0
	983	ug_vertical_gradient_level_ind(i) = k - 1
	984	i = i + 1
[1]	985	ENDIF
[177]	986	ENDIF
[97]	987	IF ( gradient /= 0.0 ) THEN
	988	IF ( k /= 1 ) THEN
	989	ug(k) = ug(k-1) + dzu(k) * gradient
	990	ELSE
[1174]	991	ug(k) = ug_surface + dzu(k) * gradient
[97]	992	ENDIF
[1]	993	ELSE
[97]	994	ug(k) = ug(k-1)
[1]	995	ENDIF
[97]	996	ENDDO
[1]	997
[97]	998	ELSE
	999
	1000	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	1001	ug(nzt+1) = ug_surface
[667]	1002	DO k = nzt, nzb, -1
[177]	1003	IF ( i < 11 ) THEN
	1004	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	1005	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	1006	gradient = ug_vertical_gradient(i) / 100.0
	1007	ug_vertical_gradient_level_ind(i) = k + 1
	1008	i = i + 1
[97]	1009	ENDIF
	1010	ENDIF
	1011	IF ( gradient /= 0.0 ) THEN
	1012	IF ( k /= nzt ) THEN
	1013	ug(k) = ug(k+1) - dzu(k+1) * gradient
	1014	ELSE
	1015	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	1016	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	1017	ENDIF
	1018	ELSE
	1019	ug(k) = ug(k+1)
	1020	ENDIF
	1021	ENDDO
	1022
	1023	ENDIF
	1024
[1]	1025	!
[767]	1026	!-- In case of no given gradients for ug, choose a zero gradient
[97]	1027	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1028	ug_vertical_gradient_level(1) = 0.0
	1029	ENDIF
	1030
	1031	!
	1032	!--
	1033	!-- If required, compute initial profile of the geostrophic wind
	1034	!-- (component vg)
	1035	i = 1
	1036	gradient = 0.0
[97]	1037
	1038	IF ( .NOT. ocean ) THEN
	1039
	1040	vg_vertical_gradient_level_ind(1) = 0
	1041	vg(0) = vg_surface
	1042	DO k = 1, nzt+1
[177]	1043	IF ( i < 11 ) THEN
	1044	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1045	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1046	gradient = vg_vertical_gradient(i) / 100.0
	1047	vg_vertical_gradient_level_ind(i) = k - 1
	1048	i = i + 1
[1]	1049	ENDIF
	1050	ENDIF
[97]	1051	IF ( gradient /= 0.0 ) THEN
	1052	IF ( k /= 1 ) THEN
	1053	vg(k) = vg(k-1) + dzu(k) * gradient
	1054	ELSE
[1174]	1055	vg(k) = vg_surface + dzu(k) * gradient
[97]	1056	ENDIF
[1]	1057	ELSE
[97]	1058	vg(k) = vg(k-1)
[1]	1059	ENDIF
[97]	1060	ENDDO
[1]	1061
[97]	1062	ELSE
	1063
[121]	1064	vg_vertical_gradient_level_ind(1) = nzt+1
	1065	vg(nzt+1) = vg_surface
[667]	1066	DO k = nzt, nzb, -1
[177]	1067	IF ( i < 11 ) THEN
	1068	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1069	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1070	gradient = vg_vertical_gradient(i) / 100.0
	1071	vg_vertical_gradient_level_ind(i) = k + 1
	1072	i = i + 1
[97]	1073	ENDIF
	1074	ENDIF
	1075	IF ( gradient /= 0.0 ) THEN
	1076	IF ( k /= nzt ) THEN
	1077	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1078	ELSE
	1079	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1080	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1081	ENDIF
	1082	ELSE
	1083	vg(k) = vg(k+1)
	1084	ENDIF
	1085	ENDDO
	1086
	1087	ENDIF
	1088
[1]	1089	!
[767]	1090	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1091	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1092	vg_vertical_gradient_level(1) = 0.0
	1093	ENDIF
	1094
	1095	!
[767]	1096	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1097	!-- interpolate them from wind profile data (if given)
	1098	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1099
	1100	u_init = ug
	1101	v_init = vg
	1102
	1103	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1104
	1105	IF ( uv_heights(1) /= 0.0 ) THEN
	1106	message_string = 'uv_heights(1) must be 0.0'
	1107	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1108	ENDIF
	1109
	1110	use_prescribed_profile_data = .TRUE.
	1111
	1112	kk = 1
	1113	u_init(0) = 0.0
	1114	v_init(0) = 0.0
	1115
	1116	DO k = 1, nz+1
	1117
	1118	IF ( kk < 100 ) THEN
	1119	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1120	kk = kk + 1
	1121	IF ( kk == 100 ) EXIT
	1122	ENDDO
	1123	ENDIF
	1124
[774]	1125	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1126	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1127	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1128	( u_profile(kk+1) - u_profile(kk) )
	1129	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1130	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1131	( v_profile(kk+1) - v_profile(kk) )
	1132	ELSE
	1133	u_init(k) = u_profile(kk)
	1134	v_init(k) = v_profile(kk)
	1135	ENDIF
	1136
	1137	ENDDO
	1138
	1139	ELSE
	1140
	1141	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1142	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1143
	1144	ENDIF
	1145
	1146	!
[94]	1147	!-- Compute initial temperature profile using the given temperature gradients
[940]	1148	IF ( .NOT. neutral ) THEN
[94]	1149
[940]	1150	i = 1
	1151	gradient = 0.0
[94]	1152
[940]	1153	IF ( .NOT. ocean ) THEN
	1154
	1155	pt_vertical_gradient_level_ind(1) = 0
	1156	DO k = 1, nzt+1
	1157	IF ( i < 11 ) THEN
	1158	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1159	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1160	gradient = pt_vertical_gradient(i) / 100.0
	1161	pt_vertical_gradient_level_ind(i) = k - 1
	1162	i = i + 1
	1163	ENDIF
[1]	1164	ENDIF
[940]	1165	IF ( gradient /= 0.0 ) THEN
	1166	IF ( k /= 1 ) THEN
	1167	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1168	ELSE
[1174]	1169	pt_init(k) = pt_surface + dzu(k) * gradient
[940]	1170	ENDIF
[94]	1171	ELSE
[940]	1172	pt_init(k) = pt_init(k-1)
[94]	1173	ENDIF
[940]	1174	ENDDO
[1]	1175
[940]	1176	ELSE
[94]	1177
[940]	1178	pt_vertical_gradient_level_ind(1) = nzt+1
	1179	DO k = nzt, 0, -1
	1180	IF ( i < 11 ) THEN
	1181	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1182	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1183	gradient = pt_vertical_gradient(i) / 100.0
	1184	pt_vertical_gradient_level_ind(i) = k + 1
	1185	i = i + 1
	1186	ENDIF
[94]	1187	ENDIF
[940]	1188	IF ( gradient /= 0.0 ) THEN
	1189	IF ( k /= nzt ) THEN
	1190	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1191	ELSE
	1192	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1193	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1194	ENDIF
[94]	1195	ELSE
[940]	1196	pt_init(k) = pt_init(k+1)
[94]	1197	ENDIF
[940]	1198	ENDDO
[94]	1199
[940]	1200	ENDIF
	1201
[94]	1202	ENDIF
	1203
[1]	1204	!
	1205	!-- In case of no given temperature gradients, choose gradient of neutral
	1206	!-- stratification
[94]	1207	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1208	pt_vertical_gradient_level(1) = 0.0
	1209	ENDIF
	1210
	1211	!
[94]	1212	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1213	!-- boundary condition
[19]	1214	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1215
	1216	!
	1217	!-- If required, compute initial humidity or scalar profile using the given
	1218	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1219	!-- values of the scalar parameters on humidity parameters
	1220	IF ( passive_scalar ) THEN
	1221	bc_q_b = bc_s_b
	1222	bc_q_t = bc_s_t
	1223	q_surface = s_surface
	1224	q_surface_initial_change = s_surface_initial_change
	1225	q_vertical_gradient = s_vertical_gradient
	1226	q_vertical_gradient_level = s_vertical_gradient_level
	1227	surface_waterflux = surface_scalarflux
[407]	1228	wall_humidityflux = wall_scalarflux
[1]	1229	ENDIF
	1230
[75]	1231	IF ( humidity .OR. passive_scalar ) THEN
[1]	1232
	1233	i = 1
	1234	gradient = 0.0
	1235	q_vertical_gradient_level_ind(1) = 0
	1236	DO k = 1, nzt+1
[177]	1237	IF ( i < 11 ) THEN
	1238	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1239	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1240	gradient = q_vertical_gradient(i) / 100.0
	1241	q_vertical_gradient_level_ind(i) = k - 1
	1242	i = i + 1
[1]	1243	ENDIF
	1244	ENDIF
	1245	IF ( gradient /= 0.0 ) THEN
	1246	IF ( k /= 1 ) THEN
	1247	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1248	ELSE
[1174]	1249	q_init(k) = q_init(k-1) + dzu(k) * gradient
[1]	1250	ENDIF
	1251	ELSE
	1252	q_init(k) = q_init(k-1)
	1253	ENDIF
[72]	1254	!
	1255	!-- Avoid negative humidities
	1256	IF ( q_init(k) < 0.0 ) THEN
	1257	q_init(k) = 0.0
	1258	ENDIF
[1]	1259	ENDDO
	1260
	1261	!
	1262	!-- In case of no given humidity gradients, choose zero gradient
	1263	!-- conditions
	1264	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1265	q_vertical_gradient_level(1) = 0.0
	1266	ENDIF
	1267	!
[1053]	1268	!-- Store humidity, rain water content and rain drop concentration
	1269	!-- gradient at the top boundary for possile Neumann boundary condition
	1270	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1271	ENDIF
	1272
[94]	1273	!
	1274	!-- If required, compute initial salinity profile using the given salinity
	1275	!-- gradients
	1276	IF ( ocean ) THEN
	1277
	1278	i = 1
	1279	gradient = 0.0
	1280
	1281	sa_vertical_gradient_level_ind(1) = nzt+1
	1282	DO k = nzt, 0, -1
[177]	1283	IF ( i < 11 ) THEN
	1284	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1285	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1286	gradient = sa_vertical_gradient(i) / 100.0
	1287	sa_vertical_gradient_level_ind(i) = k + 1
	1288	i = i + 1
[94]	1289	ENDIF
	1290	ENDIF
	1291	IF ( gradient /= 0.0 ) THEN
	1292	IF ( k /= nzt ) THEN
	1293	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1294	ELSE
	1295	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1296	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1297	ENDIF
	1298	ELSE
	1299	sa_init(k) = sa_init(k+1)
	1300	ENDIF
	1301	ENDDO
	1302
	1303	ENDIF
	1304
[138]	1305	!
[388]	1306	!-- If required compute the profile of leaf area density used in the plant
	1307	!-- canopy model
[138]	1308	IF ( plant_canopy ) THEN
	1309
	1310	i = 1
	1311	gradient = 0.0
[1]	1312
[138]	1313	IF ( .NOT. ocean ) THEN
[153]	1314
	1315	lad(0) = lad_surface
[138]	1316
	1317	lad_vertical_gradient_level_ind(1) = 0
	1318	DO k = 1, pch_index
[177]	1319	IF ( i < 11 ) THEN
	1320	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1321	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1322	gradient = lad_vertical_gradient(i)
	1323	lad_vertical_gradient_level_ind(i) = k - 1
	1324	i = i + 1
[138]	1325	ENDIF
	1326	ENDIF
	1327	IF ( gradient /= 0.0 ) THEN
	1328	IF ( k /= 1 ) THEN
	1329	lad(k) = lad(k-1) + dzu(k) * gradient
	1330	ELSE
[1174]	1331	lad(k) = lad_surface + dzu(k) *gradient
[138]	1332	ENDIF
	1333	ELSE
	1334	lad(k) = lad(k-1)
	1335	ENDIF
	1336	ENDDO
	1337
	1338	ENDIF
	1339
[1]	1340	!
[388]	1341	!-- In case of no given leaf area density gradients, choose a vanishing
	1342	!-- gradient
[138]	1343	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1344	lad_vertical_gradient_level(1) = 0.0
	1345	ENDIF
	1346
	1347	ENDIF
	1348
	1349	ENDIF
[411]	1350
	1351	!
	1352	!-- Initialize large scale subsidence if required
[580]	1353	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1354	large_scale_subsidence = .TRUE.
	1355	CALL init_w_subsidence
[1179]	1356	ENDIF
[667]	1357
[138]	1358	!
[1]	1359	!-- Compute Coriolis parameter
	1360	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1361	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1362
	1363	!
[1179]	1364	!-- Check and set buoyancy related parameters and switches
	1365	IF ( reference_state == 'horizontal_average' ) THEN
	1366	CONTINUE
	1367	ELSEIF ( reference_state == 'initial_profile' ) THEN
	1368	use_initial_profile_as_reference = .TRUE.
	1369	ELSEIF ( reference_state == 'single_value' ) THEN
	1370	use_single_reference_value = .TRUE.
	1371	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
	1372	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
	1373	ELSE
	1374	message_string = 'illegal value for reference_state: "' // &
	1375	TRIM( reference_state ) // '"'
	1376	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
	1377	ENDIF
[57]	1378
	1379	!
[1179]	1380	!-- Ocean runs always use reference values in the buoyancy term
	1381	IF ( ocean ) THEN
	1382	reference_state = 'single_value'
	1383	use_single_reference_value = .TRUE.
	1384	ENDIF
[97]	1385
	1386	!
	1387	!-- Sign of buoyancy/stability terms
	1388	IF ( ocean ) atmos_ocean_sign = -1.0
	1389
	1390	!
[108]	1391	!-- Ocean version must use flux boundary conditions at the top
	1392	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1393	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1394	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1395	ENDIF
[97]	1396
	1397	!
[1]	1398	!-- In case of a given slope, compute the relevant quantities
	1399	IF ( alpha_surface /= 0.0 ) THEN
	1400	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1401	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1402	' ) must be < 90.0'
[226]	1403	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1404	ENDIF
	1405	sloping_surface = .TRUE.
	1406	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1407	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1408	ENDIF
	1409
	1410	!
	1411	!-- Check time step and cfl_factor
	1412	IF ( dt /= -1.0 ) THEN
	1413	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1414	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1415	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1416	ENDIF
	1417	dt_3d = dt
	1418	dt_fixed = .TRUE.
	1419	ENDIF
	1420
	1421	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1422	IF ( cfl_factor == -1.0 ) THEN
[1001]	1423	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1424	cfl_factor = 0.8
[1001]	1425	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1426	cfl_factor = 0.9
[1]	1427	ELSE
[1001]	1428	cfl_factor = 0.9
[1]	1429	ENDIF
	1430	ELSE
[215]	1431	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1432	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1433	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1434	ENDIF
	1435	ENDIF
	1436
	1437	!
	1438	!-- Store simulated time at begin
	1439	simulated_time_at_begin = simulated_time
	1440
	1441	!
[291]	1442	!-- Store reference time for coupled runs and change the coupling flag,
	1443	!-- if ...
	1444	IF ( simulated_time == 0.0 ) THEN
	1445	IF ( coupling_start_time == 0.0 ) THEN
	1446	time_since_reference_point = 0.0
	1447	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1448	run_coupled = .FALSE.
	1449	ENDIF
	1450	ENDIF
	1451
	1452	!
[1]	1453	!-- Set wind speed in the Galilei-transformed system
	1454	IF ( galilei_transformation ) THEN
[1053]	1455	IF ( use_ug_for_galilei_tr .AND. &
	1456	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1457	ug_vertical_gradient(1) == 0.0 .AND. &
	1458	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1459	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1460	u_gtrans = ug_surface * 0.6
	1461	v_gtrans = vg_surface * 0.6
[1053]	1462	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1463	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1464	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1465	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1466	' with galilei transformation'
[226]	1467	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1468	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1469	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1470	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1471	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1472	' with galilei transformation'
[226]	1473	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1474	ELSE
[215]	1475	message_string = 'variable translation speed used for galilei-' // &
	1476	'transformation, which may cause & instabilities in stably ' // &
	1477	'stratified regions'
[226]	1478	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1479	ENDIF
	1480	ENDIF
	1481
	1482	!
	1483	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1484	!-- fluxes have to be used in the diffusion-terms
	1485	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1486
	1487	!
	1488	!-- Check boundary conditions and set internal variables:
	1489	!-- Lateral boundary conditions
[73]	1490	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[1159]	1491	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1492	message_string = 'unknown boundary condition: bc_lr = "' // &
	1493	TRIM( bc_lr ) // '"'
[226]	1494	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1495	ENDIF
[73]	1496	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[1159]	1497	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1498	message_string = 'unknown boundary condition: bc_ns = "' // &
	1499	TRIM( bc_ns ) // '"'
[226]	1500	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1501	ENDIF
	1502
	1503	!
[366]	1504	!-- Internal variables used for speed optimization in if clauses
[707]	1505	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1506	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1507	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1508	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1509	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1510	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1511
	1512	!
[1]	1513	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1514	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1515	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1516	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1517	IF ( psolver /= 'multigrid' ) THEN
[215]	1518	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1519	'psolver = "' // TRIM( psolver ) // '"'
[226]	1520	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1521	ENDIF
[667]	1522	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1523	momentum_advec /= 'ws-scheme') THEN
[215]	1524	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1525	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1526	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1527	ENDIF
[667]	1528	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1529	scalar_advec /= 'ws-scheme' ) THEN
[215]	1530	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1531	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1532	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1533	ENDIF
	1534	IF ( galilei_transformation ) THEN
[215]	1535	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1536	'galilei_transformation = .T.'
[226]	1537	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1538	ENDIF
	1539	ENDIF
	1540
	1541	!
	1542	!-- Bottom boundary condition for the turbulent Kinetic energy
	1543	IF ( bc_e_b == 'neumann' ) THEN
	1544	ibc_e_b = 1
	1545	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1546	ibc_e_b = 2
[1015]	1547	IF ( prandtl_layer ) THEN
	1548	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1549	TRIM( bc_e_b ) // '"'
[226]	1550	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1551	ENDIF
	1552	IF ( .NOT. prandtl_layer ) THEN
	1553	bc_e_b = 'neumann'
	1554	ibc_e_b = 1
[215]	1555	message_string = 'boundary condition bc_e_b changed to "' // &
	1556	TRIM( bc_e_b ) // '"'
[226]	1557	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1558	ENDIF
	1559	ELSE
[215]	1560	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1561	TRIM( bc_e_b ) // '"'
[226]	1562	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1563	ENDIF
	1564
	1565	!
	1566	!-- Boundary conditions for perturbation pressure
	1567	IF ( bc_p_b == 'dirichlet' ) THEN
	1568	ibc_p_b = 0
	1569	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1570	ibc_p_b = 1
	1571	ELSE
[215]	1572	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1573	TRIM( bc_p_b ) // '"'
[226]	1574	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1575	ENDIF
[1111]	1576
[1]	1577	IF ( bc_p_t == 'dirichlet' ) THEN
	1578	ibc_p_t = 0
	1579	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1580	ibc_p_t = 1
	1581	ELSE
[215]	1582	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1583	TRIM( bc_p_t ) // '"'
[226]	1584	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1585	ENDIF
	1586
	1587	!
	1588	!-- Boundary conditions for potential temperature
[102]	1589	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1590	ibc_pt_b = 2
[1]	1591	ELSE
[102]	1592	IF ( bc_pt_b == 'dirichlet' ) THEN
	1593	ibc_pt_b = 0
	1594	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1595	ibc_pt_b = 1
	1596	ELSE
[215]	1597	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1598	TRIM( bc_pt_b ) // '"'
[226]	1599	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1600	ENDIF
	1601	ENDIF
[102]	1602
[1]	1603	IF ( bc_pt_t == 'dirichlet' ) THEN
	1604	ibc_pt_t = 0
	1605	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1606	ibc_pt_t = 1
[19]	1607	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1608	ibc_pt_t = 2
[1]	1609	ELSE
[215]	1610	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1611	TRIM( bc_pt_t ) // '"'
[226]	1612	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1613	ENDIF
	1614
[1241]	1615	IF ( surface_heatflux == 9999999.9 .AND. .NOT. large_scale_forcing ) THEN
	1616	constant_heatflux = .FALSE.
	1617	ELSE
	1618	constant_heatflux = .TRUE.
	1619	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	1620	large_scale_forcing ) THEN
	1621	surface_heatflux = shf_surf(1)
	1622	ENDIF
	1623	ENDIF
	1624
[20]	1625	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1626
	1627	IF ( neutral ) THEN
	1628
	1629	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1630	THEN
	1631	message_string = 'heatflux must not be set for pure neutral flow'
	1632	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1633	ENDIF
	1634
	1635	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1636	THEN
	1637	message_string = 'heatflux must not be set for pure neutral flow'
	1638	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1639	ENDIF
	1640
	1641	ENDIF
	1642
[103]	1643	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1644	top_momentumflux_v /= 9999999.9 ) THEN
	1645	constant_top_momentumflux = .TRUE.
	1646	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1647	top_momentumflux_v == 9999999.9 ) ) THEN
	1648	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1649	'must be set'
[226]	1650	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1651	ENDIF
[1]	1652
	1653	!
	1654	!-- A given surface temperature implies Dirichlet boundary condition for
	1655	!-- temperature. In this case specification of a constant heat flux is
	1656	!-- forbidden.
	1657	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1658	surface_heatflux /= 0.0 ) THEN
[215]	1659	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1660	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1661	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1662	ENDIF
	1663	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1664	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1665	'wed with pt_surface_initial_change (/=0) = ', &
	1666	pt_surface_initial_change
[226]	1667	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1668	ENDIF
	1669
	1670	!
[19]	1671	!-- A given temperature at the top implies Dirichlet boundary condition for
	1672	!-- temperature. In this case specification of a constant heat flux is
	1673	!-- forbidden.
	1674	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1675	top_heatflux /= 0.0 ) THEN
[215]	1676	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1677	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1678	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1679	ENDIF
	1680
	1681	!
[95]	1682	!-- Boundary conditions for salinity
	1683	IF ( ocean ) THEN
	1684	IF ( bc_sa_t == 'dirichlet' ) THEN
	1685	ibc_sa_t = 0
	1686	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1687	ibc_sa_t = 1
	1688	ELSE
[215]	1689	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1690	TRIM( bc_sa_t ) // '"'
[226]	1691	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1692	ENDIF
	1693
	1694	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1695	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1696	message_string = 'boundary condition: bc_sa_t = "' // &
	1697	TRIM( bc_sa_t ) // '" requires to set ' // &
	1698	'top_salinityflux'
[226]	1699	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1700	ENDIF
[95]	1701
	1702	!
	1703	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1704	!-- salinity. In this case specification of a constant salinity flux is
	1705	!-- forbidden.
	1706	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1707	top_salinityflux /= 0.0 ) THEN
[215]	1708	message_string = 'boundary condition: bc_sa_t = "' // &
	1709	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1710	'constant_top_salinityflux = .TRUE.'
[226]	1711	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1712	ENDIF
	1713
	1714	ENDIF
	1715
	1716	!
[75]	1717	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1718	!-- water content / scalar
[75]	1719	IF ( humidity .OR. passive_scalar ) THEN
	1720	IF ( humidity ) THEN
[1]	1721	sq = 'q'
	1722	ELSE
	1723	sq = 's'
	1724	ENDIF
	1725	IF ( bc_q_b == 'dirichlet' ) THEN
	1726	ibc_q_b = 0
	1727	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1728	ibc_q_b = 1
	1729	ELSE
[215]	1730	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1731	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1732	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1733	ENDIF
	1734	IF ( bc_q_t == 'dirichlet' ) THEN
	1735	ibc_q_t = 0
	1736	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1737	ibc_q_t = 1
	1738	ELSE
[215]	1739	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1740	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1741	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1742	ENDIF
	1743
[1241]	1744	IF ( surface_waterflux == 9999999.9 .AND. &
	1745	.NOT. large_scale_forcing ) THEN
	1746	constant_waterflux = .FALSE.
	1747	ELSE
	1748	constant_waterflux = .TRUE.
	1749	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	1750	large_scale_forcing ) THEN
	1751	surface_waterflux = qsws_surf(1)
	1752	ENDIF
	1753	ENDIF
[1]	1754
	1755	!
	1756	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1757	!-- humidity. In this case specification of a constant water flux is
[1]	1758	!-- forbidden.
	1759	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1760	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1761	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1762	'th prescribed surface flux'
[226]	1763	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1764	ENDIF
	1765	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1766	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1767	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1768	q_surface_initial_change
[226]	1769	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1770	ENDIF
[1053]	1771
[1]	1772	ENDIF
	1773	!
	1774	!-- Boundary conditions for horizontal components of wind speed
	1775	IF ( bc_uv_b == 'dirichlet' ) THEN
	1776	ibc_uv_b = 0
	1777	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1778	ibc_uv_b = 1
	1779	IF ( prandtl_layer ) THEN
[215]	1780	message_string = 'boundary condition: bc_uv_b = "' // &
	1781	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1782	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1783	ENDIF
	1784	ELSE
[215]	1785	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1786	TRIM( bc_uv_b ) // '"'
[226]	1787	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1788	ENDIF
[667]	1789	!
	1790	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1791	!-- assigned with the u and v values of the ocean surface
	1792	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1793	ibc_uv_b = 2
	1794	ENDIF
[215]	1795
[108]	1796	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1797	bc_uv_t = 'neumann'
[1]	1798	ibc_uv_t = 1
	1799	ELSE
[132]	1800	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1801	ibc_uv_t = 0
[767]	1802	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1803	!
	1804	!-- Velocities for the initial u,v-profiles are set zero at the top
	1805	!-- in case of dirichlet_0 conditions
	1806	u_init(nzt+1) = 0.0
	1807	v_init(nzt+1) = 0.0
	1808	ENDIF
[108]	1809	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1810	ibc_uv_t = 1
	1811	ELSE
[215]	1812	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1813	TRIM( bc_uv_t ) // '"'
[226]	1814	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1815	ENDIF
	1816	ENDIF
	1817
	1818	!
	1819	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1820	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1821	rayleigh_damping_factor = 0.0
[1]	1822	ELSE
	1823	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1824	THEN
[215]	1825	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1826	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1827	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1828	ENDIF
	1829	ENDIF
	1830
	1831	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1832	IF ( .NOT. ocean ) THEN
	1833	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1834	ELSE
	1835	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1836	ENDIF
[1]	1837	ELSE
[108]	1838	IF ( .NOT. ocean ) THEN
	1839	IF ( rayleigh_damping_height < 0.0 .OR. &
	1840	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1841	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1842	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1843	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1844	ENDIF
[108]	1845	ELSE
	1846	IF ( rayleigh_damping_height > 0.0 .OR. &
	1847	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1848	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1849	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1850	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1851	ENDIF
[1]	1852	ENDIF
	1853	ENDIF
	1854
	1855	!
	1856	!-- Check number of chosen statistic regions. More than 10 regions are not
	1857	!-- allowed, because so far no more than 10 corresponding output files can
	1858	!-- be opened (cf. check_open)
	1859	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1860	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1861	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1862	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1863	ENDIF
	1864	IF ( normalizing_region > statistic_regions .OR. &
	1865	normalizing_region < 0) THEN
[215]	1866	WRITE ( message_string, * ) 'normalizing_region = ', &
	1867	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1868	' (value of statistic_regions)'
[226]	1869	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1870	ENDIF
	1871
	1872	!
[116]	1873	!-- Check the interval for sorting particles.
	1874	!-- Using particles as cloud droplets requires sorting after each timestep.
	1875	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1876	dt_sort_particles = 0.0
[215]	1877	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1878	'_droplets = .TRUE.'
[226]	1879	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1880	ENDIF
	1881
	1882	!
[1]	1883	!-- Set the default intervals for data output, if necessary
	1884	!-- NOTE: dt_dosp has already been set in package_parin
	1885	IF ( dt_data_output /= 9999999.9 ) THEN
	1886	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1887	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1888	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1889	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1890	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1891	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1892	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1893	DO mid = 1, max_masks
[410]	1894	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1895	ENDDO
[1]	1896	ENDIF
	1897
	1898	!
	1899	!-- Set the default skip time intervals for data output, if necessary
	1900	IF ( skip_time_dopr == 9999999.9 ) &
	1901	skip_time_dopr = skip_time_data_output
	1902	IF ( skip_time_dosp == 9999999.9 ) &
	1903	skip_time_dosp = skip_time_data_output
	1904	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1905	skip_time_do2d_xy = skip_time_data_output
	1906	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1907	skip_time_do2d_xz = skip_time_data_output
	1908	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1909	skip_time_do2d_yz = skip_time_data_output
	1910	IF ( skip_time_do3d == 9999999.9 ) &
	1911	skip_time_do3d = skip_time_data_output
	1912	IF ( skip_time_data_output_av == 9999999.9 ) &
	1913	skip_time_data_output_av = skip_time_data_output
[564]	1914	DO mid = 1, max_masks
[410]	1915	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1916	skip_time_domask(mid) = skip_time_data_output
	1917	ENDDO
[1]	1918
	1919	!
	1920	!-- Check the average intervals (first for 3d-data, then for profiles and
	1921	!-- spectra)
	1922	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1923	WRITE( message_string, * ) 'averaging_interval = ', &
	1924	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1925	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1926	ENDIF
	1927
	1928	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1929	averaging_interval_pr = averaging_interval
	1930	ENDIF
	1931
	1932	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1933	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1934	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1935	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1936	ENDIF
	1937
	1938	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1939	averaging_interval_sp = averaging_interval
	1940	ENDIF
	1941
	1942	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1943	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1944	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1945	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1946	ENDIF
	1947
	1948	!
	1949	!-- Set the default interval for profiles entering the temporal average
	1950	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1951	dt_averaging_input_pr = dt_averaging_input
	1952	ENDIF
	1953
	1954	!
	1955	!-- Set the default interval for the output of timeseries to a reasonable
	1956	!-- value (tries to minimize the number of calls of flow_statistics)
	1957	IF ( dt_dots == 9999999.9 ) THEN
	1958	IF ( averaging_interval_pr == 0.0 ) THEN
	1959	dt_dots = MIN( dt_run_control, dt_dopr )
	1960	ELSE
	1961	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1962	ENDIF
	1963	ENDIF
	1964
	1965	!
	1966	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1967	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1968	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1969	dt_averaging_input, ' must be <= averaging_interval = ', &
	1970	averaging_interval
[226]	1971	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1972	ENDIF
	1973
	1974	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1975	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1976	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1977	averaging_interval_pr
[226]	1978	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1979	ENDIF
	1980
	1981	!
[72]	1982	!-- Set the default value for the integration interval of precipitation amount
	1983	IF ( precipitation ) THEN
	1984	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1985	precipitation_amount_interval = dt_do2d_xy
	1986	ELSE
	1987	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1988	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1989	precipitation_amount_interval, ' must not be larger than ', &
	1990	'dt_do2d_xy = ', dt_do2d_xy
[226]	1991	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1992	ENDIF
	1993	ENDIF
	1994	ENDIF
	1995
	1996	!
[1]	1997	!-- Determine the number of output profiles and check whether they are
	1998	!-- permissible
	1999	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	2000
	2001	dopr_n = dopr_n + 1
	2002	i = dopr_n
	2003
	2004	!
	2005	!-- Determine internal profile number (for hom, homs)
	2006	!-- and store height levels
	2007	SELECT CASE ( TRIM( data_output_pr(i) ) )
	2008
	2009	CASE ( 'u', '#u' )
	2010	dopr_index(i) = 1
[87]	2011	dopr_unit(i) = 'm/s'
[1]	2012	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	2013	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2014	dopr_initial_index(i) = 5
	2015	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	2016	data_output_pr(i) = data_output_pr(i)(2:)
	2017	ENDIF
	2018
	2019	CASE ( 'v', '#v' )
	2020	dopr_index(i) = 2
[87]	2021	dopr_unit(i) = 'm/s'
	2022	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2023	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2024	dopr_initial_index(i) = 6
	2025	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	2026	data_output_pr(i) = data_output_pr(i)(2:)
	2027	ENDIF
	2028
	2029	CASE ( 'w' )
	2030	dopr_index(i) = 3
[87]	2031	dopr_unit(i) = 'm/s'
	2032	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2033
	2034	CASE ( 'pt', '#pt' )
	2035	IF ( .NOT. cloud_physics ) THEN
	2036	dopr_index(i) = 4
[87]	2037	dopr_unit(i) = 'K'
[1]	2038	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2039	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2040	dopr_initial_index(i) = 7
	2041	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2042	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	2043	data_output_pr(i) = data_output_pr(i)(2:)
	2044	ENDIF
	2045	ELSE
	2046	dopr_index(i) = 43
[87]	2047	dopr_unit(i) = 'K'
[1]	2048	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	2049	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2050	dopr_initial_index(i) = 28
	2051	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2052	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	2053	data_output_pr(i) = data_output_pr(i)(2:)
	2054	ENDIF
	2055	ENDIF
	2056
	2057	CASE ( 'e' )
	2058	dopr_index(i) = 8
[87]	2059	dopr_unit(i) = 'm2/s2'
[1]	2060	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	2061	hom(nzb,2,8,:) = 0.0
	2062
	2063	CASE ( 'km', '#km' )
	2064	dopr_index(i) = 9
[87]	2065	dopr_unit(i) = 'm2/s'
[1]	2066	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2067	hom(nzb,2,9,:) = 0.0
	2068	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2069	dopr_initial_index(i) = 23
	2070	hom(:,2,23,:) = hom(:,2,9,:)
	2071	data_output_pr(i) = data_output_pr(i)(2:)
	2072	ENDIF
	2073
	2074	CASE ( 'kh', '#kh' )
	2075	dopr_index(i) = 10
[87]	2076	dopr_unit(i) = 'm2/s'
[1]	2077	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2078	hom(nzb,2,10,:) = 0.0
	2079	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2080	dopr_initial_index(i) = 24
	2081	hom(:,2,24,:) = hom(:,2,10,:)
	2082	data_output_pr(i) = data_output_pr(i)(2:)
	2083	ENDIF
	2084
	2085	CASE ( 'l', '#l' )
	2086	dopr_index(i) = 11
[87]	2087	dopr_unit(i) = 'm'
[1]	2088	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2089	hom(nzb,2,11,:) = 0.0
	2090	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2091	dopr_initial_index(i) = 25
	2092	hom(:,2,25,:) = hom(:,2,11,:)
	2093	data_output_pr(i) = data_output_pr(i)(2:)
	2094	ENDIF
	2095
	2096	CASE ( 'w"u"' )
	2097	dopr_index(i) = 12
[87]	2098	dopr_unit(i) = 'm2/s2'
[1]	2099	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2100	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2101
	2102	CASE ( 'wu' )
	2103	dopr_index(i) = 13
[87]	2104	dopr_unit(i) = 'm2/s2'
[1]	2105	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2106
	2107	CASE ( 'w"v"' )
	2108	dopr_index(i) = 14
[87]	2109	dopr_unit(i) = 'm2/s2'
[1]	2110	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2111	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2112
	2113	CASE ( 'wv' )
	2114	dopr_index(i) = 15
[87]	2115	dopr_unit(i) = 'm2/s2'
[1]	2116	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2117
	2118	CASE ( 'w"pt"' )
	2119	dopr_index(i) = 16
[87]	2120	dopr_unit(i) = 'K m/s'
[1]	2121	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2122
	2123	CASE ( 'wpt' )
	2124	dopr_index(i) = 17
[87]	2125	dopr_unit(i) = 'K m/s'
[1]	2126	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2127
	2128	CASE ( 'wpt' )
	2129	dopr_index(i) = 18
[87]	2130	dopr_unit(i) = 'K m/s'
[1]	2131	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2132
	2133	CASE ( 'wu' )
	2134	dopr_index(i) = 19
[87]	2135	dopr_unit(i) = 'm2/s2'
[1]	2136	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2137	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2138
	2139	CASE ( 'wv' )
	2140	dopr_index(i) = 20
[87]	2141	dopr_unit(i) = 'm2/s2'
[1]	2142	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2143	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2144
	2145	CASE ( 'wptBC' )
	2146	dopr_index(i) = 21
[87]	2147	dopr_unit(i) = 'K m/s'
[1]	2148	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2149
	2150	CASE ( 'wptBC' )
	2151	dopr_index(i) = 22
[87]	2152	dopr_unit(i) = 'K m/s'
[1]	2153	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2154
[96]	2155	CASE ( 'sa', '#sa' )
	2156	IF ( .NOT. ocean ) THEN
[215]	2157	message_string = 'data_output_pr = ' // &
	2158	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2159	'lemented for ocean = .FALSE.'
[226]	2160	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2161	ELSE
	2162	dopr_index(i) = 23
	2163	dopr_unit(i) = 'psu'
	2164	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2165	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2166	dopr_initial_index(i) = 26
	2167	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2168	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2169	data_output_pr(i) = data_output_pr(i)(2:)
	2170	ENDIF
	2171	ENDIF
	2172
[1]	2173	CASE ( 'u*2' )
	2174	dopr_index(i) = 30
[87]	2175	dopr_unit(i) = 'm2/s2'
[1]	2176	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2177
	2178	CASE ( 'v*2' )
	2179	dopr_index(i) = 31
[87]	2180	dopr_unit(i) = 'm2/s2'
[1]	2181	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2182
	2183	CASE ( 'w*2' )
	2184	dopr_index(i) = 32
[87]	2185	dopr_unit(i) = 'm2/s2'
[1]	2186	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2187
	2188	CASE ( 'pt*2' )
	2189	dopr_index(i) = 33
[87]	2190	dopr_unit(i) = 'K2'
[1]	2191	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2192
	2193	CASE ( 'e*' )
	2194	dopr_index(i) = 34
[87]	2195	dopr_unit(i) = 'm2/s2'
[1]	2196	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2197
	2198	CASE ( 'w2pt' )
	2199	dopr_index(i) = 35
[87]	2200	dopr_unit(i) = 'K m2/s2'
[1]	2201	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2202
	2203	CASE ( 'wpt2' )
	2204	dopr_index(i) = 36
[87]	2205	dopr_unit(i) = 'K2 m/s'
[1]	2206	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2207
	2208	CASE ( 'we' )
	2209	dopr_index(i) = 37
[87]	2210	dopr_unit(i) = 'm3/s3'
[1]	2211	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2212
	2213	CASE ( 'w*3' )
	2214	dopr_index(i) = 38
[87]	2215	dopr_unit(i) = 'm3/s3'
[1]	2216	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2217
	2218	CASE ( 'Sw' )
	2219	dopr_index(i) = 39
[89]	2220	dopr_unit(i) = 'none'
[1]	2221	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2222
[232]	2223	CASE ( 'p' )
	2224	dopr_index(i) = 40
	2225	dopr_unit(i) = 'Pa'
	2226	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2227
[1]	2228	CASE ( 'q', '#q' )
[108]	2229	IF ( .NOT. humidity ) THEN
[215]	2230	message_string = 'data_output_pr = ' // &
	2231	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2232	'lemented for humidity = .FALSE.'
[226]	2233	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2234	ELSE
	2235	dopr_index(i) = 41
[87]	2236	dopr_unit(i) = 'kg/kg'
	2237	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2238	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2239	dopr_initial_index(i) = 26
	2240	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2241	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2242	data_output_pr(i) = data_output_pr(i)(2:)
	2243	ENDIF
	2244	ENDIF
	2245
	2246	CASE ( 's', '#s' )
	2247	IF ( .NOT. passive_scalar ) THEN
[215]	2248	message_string = 'data_output_pr = ' // &
	2249	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2250	'lemented for passive_scalar = .FALSE.'
[226]	2251	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2252	ELSE
	2253	dopr_index(i) = 41
[87]	2254	dopr_unit(i) = 'kg/m3'
	2255	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2256	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2257	dopr_initial_index(i) = 26
	2258	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2259	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2260	data_output_pr(i) = data_output_pr(i)(2:)
	2261	ENDIF
	2262	ENDIF
	2263
	2264	CASE ( 'qv', '#qv' )
	2265	IF ( .NOT. cloud_physics ) THEN
	2266	dopr_index(i) = 41
[87]	2267	dopr_unit(i) = 'kg/kg'
	2268	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2269	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2270	dopr_initial_index(i) = 26
	2271	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2272	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2273	data_output_pr(i) = data_output_pr(i)(2:)
	2274	ENDIF
	2275	ELSE
	2276	dopr_index(i) = 42
[87]	2277	dopr_unit(i) = 'kg/kg'
	2278	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2279	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2280	dopr_initial_index(i) = 27
	2281	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2282	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2283	data_output_pr(i) = data_output_pr(i)(2:)
	2284	ENDIF
	2285	ENDIF
	2286
	2287	CASE ( 'lpt', '#lpt' )
	2288	IF ( .NOT. cloud_physics ) THEN
[215]	2289	message_string = 'data_output_pr = ' // &
	2290	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2291	'lemented for cloud_physics = .FALSE.'
[226]	2292	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2293	ELSE
	2294	dopr_index(i) = 4
[87]	2295	dopr_unit(i) = 'K'
[1]	2296	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2297	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2298	dopr_initial_index(i) = 7
	2299	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2300	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2301	data_output_pr(i) = data_output_pr(i)(2:)
	2302	ENDIF
	2303	ENDIF
	2304
	2305	CASE ( 'vpt', '#vpt' )
	2306	dopr_index(i) = 44
[87]	2307	dopr_unit(i) = 'K'
	2308	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2309	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2310	dopr_initial_index(i) = 29
	2311	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2312	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2313	data_output_pr(i) = data_output_pr(i)(2:)
	2314	ENDIF
	2315
	2316	CASE ( 'w"vpt"' )
	2317	dopr_index(i) = 45
[87]	2318	dopr_unit(i) = 'K m/s'
[1]	2319	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2320
	2321	CASE ( 'wvpt' )
	2322	dopr_index(i) = 46
[87]	2323	dopr_unit(i) = 'K m/s'
[1]	2324	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2325
	2326	CASE ( 'wvpt' )
	2327	dopr_index(i) = 47
[87]	2328	dopr_unit(i) = 'K m/s'
[1]	2329	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2330
	2331	CASE ( 'w"q"' )
[108]	2332	IF ( .NOT. humidity ) THEN
[215]	2333	message_string = 'data_output_pr = ' // &
	2334	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2335	'lemented for humidity = .FALSE.'
[226]	2336	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2337	ELSE
	2338	dopr_index(i) = 48
[87]	2339	dopr_unit(i) = 'kg/kg m/s'
[1]	2340	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2341	ENDIF
	2342
	2343	CASE ( 'wq' )
[108]	2344	IF ( .NOT. humidity ) THEN
[215]	2345	message_string = 'data_output_pr = ' // &
	2346	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2347	'lemented for humidity = .FALSE.'
[226]	2348	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2349	ELSE
	2350	dopr_index(i) = 49
[87]	2351	dopr_unit(i) = 'kg/kg m/s'
[1]	2352	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2353	ENDIF
	2354
	2355	CASE ( 'wq' )
[108]	2356	IF ( .NOT. humidity ) THEN
[215]	2357	message_string = 'data_output_pr = ' // &
	2358	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2359	'lemented for humidity = .FALSE.'
[226]	2360	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2361	ELSE
	2362	dopr_index(i) = 50
[87]	2363	dopr_unit(i) = 'kg/kg m/s'
[1]	2364	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2365	ENDIF
	2366
	2367	CASE ( 'w"s"' )
	2368	IF ( .NOT. passive_scalar ) THEN
[215]	2369	message_string = 'data_output_pr = ' // &
	2370	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2371	'lemented for passive_scalar = .FALSE.'
[226]	2372	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2373	ELSE
	2374	dopr_index(i) = 48
[87]	2375	dopr_unit(i) = 'kg/m3 m/s'
[1]	2376	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2377	ENDIF
	2378
	2379	CASE ( 'ws' )
	2380	IF ( .NOT. passive_scalar ) THEN
[215]	2381	message_string = 'data_output_pr = ' // &
	2382	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2383	'lemented for passive_scalar = .FALSE.'
[226]	2384	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2385	ELSE
	2386	dopr_index(i) = 49
[87]	2387	dopr_unit(i) = 'kg/m3 m/s'
[1]	2388	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2389	ENDIF
	2390
	2391	CASE ( 'ws' )
	2392	IF ( .NOT. passive_scalar ) THEN
[215]	2393	message_string = 'data_output_pr = ' // &
	2394	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2395	'lemented for passive_scalar = .FALSE.'
[226]	2396	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2397	ELSE
	2398	dopr_index(i) = 50
[87]	2399	dopr_unit(i) = 'kg/m3 m/s'
[1]	2400	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2401	ENDIF
	2402
	2403	CASE ( 'w"qv"' )
[75]	2404	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2405	THEN
	2406	dopr_index(i) = 48
[87]	2407	dopr_unit(i) = 'kg/kg m/s'
[1]	2408	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2409	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2410	dopr_index(i) = 51
[87]	2411	dopr_unit(i) = 'kg/kg m/s'
[1]	2412	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2413	ELSE
[215]	2414	message_string = 'data_output_pr = ' // &
	2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2416	'lemented for cloud_physics = .FALSE. an&' // &
	2417	'd humidity = .FALSE.'
[226]	2418	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2419	ENDIF
	2420
	2421	CASE ( 'wqv' )
[75]	2422	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2423	THEN
	2424	dopr_index(i) = 49
[87]	2425	dopr_unit(i) = 'kg/kg m/s'
[1]	2426	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2427	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2428	dopr_index(i) = 52
[87]	2429	dopr_unit(i) = 'kg/kg m/s'
[1]	2430	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2431	ELSE
[215]	2432	message_string = 'data_output_pr = ' // &
	2433	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2434	'lemented for cloud_physics = .FALSE. an&' // &
	2435	'd humidity = .FALSE.'
[226]	2436	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2437	ENDIF
	2438
	2439	CASE ( 'wqv' )
[75]	2440	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2441	THEN
	2442	dopr_index(i) = 50
[87]	2443	dopr_unit(i) = 'kg/kg m/s'
[1]	2444	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2445	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2446	dopr_index(i) = 53
[87]	2447	dopr_unit(i) = 'kg/kg m/s'
[1]	2448	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2449	ELSE
[215]	2450	message_string = 'data_output_pr = ' // &
	2451	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2452	'lemented for cloud_physics = .FALSE. an&' // &
	2453	'd humidity = .FALSE.'
[226]	2454	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2455	ENDIF
	2456
	2457	CASE ( 'ql' )
	2458	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2459	message_string = 'data_output_pr = ' // &
	2460	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2461	'lemented for cloud_physics = .FALSE. or' // &
	2462	'&cloud_droplets = .FALSE.'
[226]	2463	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2464	ELSE
	2465	dopr_index(i) = 54
[87]	2466	dopr_unit(i) = 'kg/kg'
[1]	2467	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2468	ENDIF
	2469
[524]	2470	CASE ( 'wuu*:dz' )
[1]	2471	dopr_index(i) = 55
[87]	2472	dopr_unit(i) = 'm2/s3'
[1]	2473	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2474
[524]	2475	CASE ( 'wp:dz' )
[1]	2476	dopr_index(i) = 56
[87]	2477	dopr_unit(i) = 'm2/s3'
[106]	2478	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2479
[524]	2480	CASE ( 'w"e:dz' )
[1]	2481	dopr_index(i) = 57
[87]	2482	dopr_unit(i) = 'm2/s3'
[1]	2483	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2484
[667]	2485
[1]	2486	CASE ( 'u"pt"' )
	2487	dopr_index(i) = 58
[87]	2488	dopr_unit(i) = 'K m/s'
[1]	2489	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2490
	2491	CASE ( 'upt' )
	2492	dopr_index(i) = 59
[87]	2493	dopr_unit(i) = 'K m/s'
[1]	2494	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2495
	2496	CASE ( 'upt_t' )
	2497	dopr_index(i) = 60
[87]	2498	dopr_unit(i) = 'K m/s'
[1]	2499	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2500
	2501	CASE ( 'v"pt"' )
	2502	dopr_index(i) = 61
[87]	2503	dopr_unit(i) = 'K m/s'
[1]	2504	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2505
	2506	CASE ( 'vpt' )
	2507	dopr_index(i) = 62
[87]	2508	dopr_unit(i) = 'K m/s'
[1]	2509	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2510
	2511	CASE ( 'vpt_t' )
	2512	dopr_index(i) = 63
[87]	2513	dopr_unit(i) = 'K m/s'
[1]	2514	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2515
[96]	2516	CASE ( 'rho' )
[388]	2517	IF ( .NOT. ocean ) THEN
	2518	message_string = 'data_output_pr = ' // &
	2519	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2520	'lemented for ocean = .FALSE.'
	2521	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2522	ELSE
	2523	dopr_index(i) = 64
	2524	dopr_unit(i) = 'kg/m3'
	2525	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1179]	2526	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2527	dopr_initial_index(i) = 77
	2528	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
	2529	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
	2530	data_output_pr(i) = data_output_pr(i)(2:)
	2531	ENDIF
[388]	2532	ENDIF
[1]	2533
[96]	2534	CASE ( 'w"sa"' )
	2535	IF ( .NOT. ocean ) THEN
[215]	2536	message_string = 'data_output_pr = ' // &
	2537	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2538	'lemented for ocean = .FALSE.'
[226]	2539	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2540	ELSE
	2541	dopr_index(i) = 65
	2542	dopr_unit(i) = 'psu m/s'
	2543	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2544	ENDIF
	2545
	2546	CASE ( 'wsa' )
	2547	IF ( .NOT. ocean ) THEN
[215]	2548	message_string = 'data_output_pr = ' // &
	2549	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2550	'lemented for ocean = .FALSE.'
[226]	2551	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2552	ELSE
	2553	dopr_index(i) = 66
	2554	dopr_unit(i) = 'psu m/s'
	2555	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2556	ENDIF
	2557
	2558	CASE ( 'wsa' )
	2559	IF ( .NOT. ocean ) THEN
[215]	2560	message_string = 'data_output_pr = ' // &
	2561	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2562	'lemented for ocean = .FALSE.'
[226]	2563	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2564	ELSE
	2565	dopr_index(i) = 67
	2566	dopr_unit(i) = 'psu m/s'
	2567	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2568	ENDIF
	2569
[106]	2570	CASE ( 'wp' )
	2571	dopr_index(i) = 68
	2572	dopr_unit(i) = 'm3/s3'
	2573	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2574
[106]	2575	CASE ( 'w"e' )
	2576	dopr_index(i) = 69
	2577	dopr_unit(i) = 'm3/s3'
	2578	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2579
[197]	2580	CASE ( 'q*2' )
	2581	IF ( .NOT. humidity ) THEN
[215]	2582	message_string = 'data_output_pr = ' // &
	2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2584	'lemented for humidity = .FALSE.'
[226]	2585	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2586	ELSE
	2587	dopr_index(i) = 70
	2588	dopr_unit(i) = 'kg2/kg2'
	2589	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2590	ENDIF
[106]	2591
[388]	2592	CASE ( 'prho' )
	2593	IF ( .NOT. ocean ) THEN
	2594	message_string = 'data_output_pr = ' // &
	2595	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2596	'lemented for ocean = .FALSE.'
	2597	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2598	ELSE
	2599	dopr_index(i) = 71
	2600	dopr_unit(i) = 'kg/m3'
	2601	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2602	ENDIF
	2603
	2604	CASE ( 'hyp' )
	2605	dopr_index(i) = 72
[531]	2606	dopr_unit(i) = 'dbar'
[388]	2607	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2608
[1053]	2609	CASE ( 'nr' )
	2610	IF ( .NOT. cloud_physics ) THEN
	2611	message_string = 'data_output_pr = ' // &
	2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2613	'lemented for cloud_physics = .FALSE.'
	2614	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2615	ELSEIF ( icloud_scheme /= 0 ) THEN
	2616	message_string = 'data_output_pr = ' // &
	2617	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2618	'lemented for cloud_scheme /= seifert_beheng'
	2619	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2620	ELSEIF ( .NOT. precipitation ) THEN
	2621	message_string = 'data_output_pr = ' // &
	2622	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2623	'lemented for precipitation = .FALSE.'
	2624	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2625	ELSE
	2626	dopr_index(i) = 73
	2627	dopr_unit(i) = '1/m3'
	2628	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2629	ENDIF
	2630
	2631	CASE ( 'qr' )
	2632	IF ( .NOT. cloud_physics ) THEN
	2633	message_string = 'data_output_pr = ' // &
	2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2635	'lemented for cloud_physics = .FALSE.'
	2636	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2637	ELSEIF ( icloud_scheme /= 0 ) THEN
	2638	message_string = 'data_output_pr = ' // &
	2639	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2640	'lemented for cloud_scheme /= seifert_beheng'
	2641	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2642	ELSEIF ( .NOT. precipitation ) THEN
	2643	message_string = 'data_output_pr = ' // &
	2644	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2645	'lemented for precipitation = .FALSE.'
	2646	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2647	ELSE
	2648	dopr_index(i) = 74
	2649	dopr_unit(i) = 'kg/kg'
	2650	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2651	ENDIF
	2652
	2653	CASE ( 'qc' )
	2654	IF ( .NOT. cloud_physics ) THEN
	2655	message_string = 'data_output_pr = ' // &
	2656	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2657	'lemented for cloud_physics = .FALSE.'
	2658	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2659	ELSEIF ( icloud_scheme /= 0 ) THEN
	2660	message_string = 'data_output_pr = ' // &
	2661	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2662	'lemented for cloud_scheme /= seifert_beheng'
	2663	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2664	ELSE
	2665	dopr_index(i) = 75
	2666	dopr_unit(i) = 'kg/kg'
	2667	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2668	ENDIF
	2669
	2670	CASE ( 'prr' )
	2671	IF ( .NOT. cloud_physics ) THEN
	2672	message_string = 'data_output_pr = ' // &
	2673	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2674	'lemented for cloud_physics = .FALSE.'
	2675	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2676	ELSEIF ( icloud_scheme /= 0 ) THEN
	2677	message_string = 'data_output_pr = ' // &
	2678	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2679	'lemented for cloud_scheme /= seifert_beheng'
	2680	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2681	ELSEIF ( .NOT. precipitation ) THEN
	2682	message_string = 'data_output_pr = ' // &
	2683	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2684	'lemented for precipitation = .FALSE.'
	2685	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2686
	2687	ELSE
	2688	dopr_index(i) = 76
	2689	dopr_unit(i) = 'kg/kg m/s'
	2690	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2691	ENDIF
	2692
[1241]	2693	CASE ( 'ug' )
	2694	dopr_index(i) = 78
	2695	dopr_unit(i) = 'm/s'
	2696	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
	2697
	2698	CASE ( 'vg' )
	2699	dopr_index(i) = 79
	2700	dopr_unit(i) = 'm/s'
	2701	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
	2702
[1]	2703	CASE DEFAULT
[87]	2704
	2705	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2706
	2707	IF ( unit == 'illegal' ) THEN
[215]	2708	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2709	message_string = 'illegal value for data_output_pr or ' // &
	2710	'data_output_pr_user = "' // &
	2711	TRIM( data_output_pr(i) ) // '"'
[226]	2712	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2713	ELSE
	2714	message_string = 'illegal value for data_output_pr = "' // &
	2715	TRIM( data_output_pr(i) ) // '"'
[226]	2716	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2717	ENDIF
[1]	2718	ENDIF
	2719
	2720	END SELECT
[667]	2721
[1]	2722	ENDDO
	2723
	2724
	2725	!
	2726	!-- Append user-defined data output variables to the standard data output
	2727	IF ( data_output_user(1) /= ' ' ) THEN
	2728	i = 1
	2729	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2730	i = i + 1
	2731	ENDDO
	2732	j = 1
	2733	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2734	IF ( i > 100 ) THEN
[215]	2735	message_string = 'number of output quantitities given by data' // &
	2736	'_output and data_output_user exceeds the limit of 100'
[226]	2737	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2738	ENDIF
	2739	data_output(i) = data_output_user(j)
	2740	i = i + 1
	2741	j = j + 1
	2742	ENDDO
	2743	ENDIF
	2744
	2745	!
	2746	!-- Check and set steering parameters for 2d/3d data output and averaging
	2747	i = 1
	2748	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2749	!
	2750	!-- Check for data averaging
	2751	ilen = LEN_TRIM( data_output(i) )
	2752	j = 0 ! no data averaging
	2753	IF ( ilen > 3 ) THEN
	2754	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2755	j = 1 ! data averaging
	2756	data_output(i) = data_output(i)(1:ilen-3)
	2757	ENDIF
	2758	ENDIF
	2759	!
	2760	!-- Check for cross section or volume data
	2761	ilen = LEN_TRIM( data_output(i) )
	2762	k = 0 ! 3d data
	2763	var = data_output(i)(1:ilen)
	2764	IF ( ilen > 3 ) THEN
	2765	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2766	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2767	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2768	k = 1 ! 2d data
	2769	var = data_output(i)(1:ilen-3)
	2770	ENDIF
	2771	ENDIF
	2772	!
	2773	!-- Check for allowed value and set units
	2774	SELECT CASE ( TRIM( var ) )
	2775
	2776	CASE ( 'e' )
	2777	IF ( constant_diffusion ) THEN
[215]	2778	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2779	'res constant_diffusion = .FALSE.'
[226]	2780	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2781	ENDIF
	2782	unit = 'm2/s2'
	2783
[771]	2784	CASE ( 'lpt' )
	2785	IF ( .NOT. cloud_physics ) THEN
	2786	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2787	'res cloud_physics = .TRUE.'
	2788	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2789	ENDIF
	2790	unit = 'K'
	2791
[1053]	2792	CASE ( 'nr' )
	2793	IF ( .NOT. cloud_physics ) THEN
	2794	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2795	'res cloud_physics = .TRUE.'
	2796	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2797	ELSEIF ( icloud_scheme /= 0 ) THEN
	2798	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2799	'res cloud_scheme = seifert_beheng'
	2800	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2801	ENDIF
	2802	unit = '1/m3'
	2803
[1]	2804	CASE ( 'pc', 'pr' )
	2805	IF ( .NOT. particle_advection ) THEN
[215]	2806	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2807	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2808	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2809	ENDIF
	2810	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2811	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2812
[1053]	2813	CASE ( 'prr' )
	2814	IF ( .NOT. cloud_physics ) THEN
	2815	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2816	'res cloud_physics = .TRUE.'
	2817	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2818	ELSEIF ( icloud_scheme /= 0 ) THEN
	2819	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2820	'res cloud_scheme = seifert_beheng'
	2821	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2822	ELSEIF ( .NOT. precipitation ) THEN
	2823	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2824	'res precipitation = .TRUE.'
	2825	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2826	ENDIF
	2827	unit = 'kg/kg m/s'
	2828
[1]	2829	CASE ( 'q', 'vpt' )
[75]	2830	IF ( .NOT. humidity ) THEN
[215]	2831	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2832	'res humidity = .TRUE.'
[226]	2833	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2834	ENDIF
	2835	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2836	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2837
[1053]	2838	CASE ( 'qc' )
	2839	IF ( .NOT. cloud_physics ) THEN
	2840	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2841	'res cloud_physics = .TRUE.'
	2842	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2843	ELSEIF ( icloud_scheme /= 0 ) THEN
	2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2845	'res cloud_scheme = seifert_beheng'
	2846	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2847	ENDIF
	2848	unit = 'kg/kg'
	2849
[1]	2850	CASE ( 'ql' )
	2851	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2852	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2853	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2854	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2855	ENDIF
	2856	unit = 'kg/kg'
	2857
	2858	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2859	IF ( .NOT. cloud_droplets ) THEN
[215]	2860	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2861	'res cloud_droplets = .TRUE.'
[226]	2862	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2863	ENDIF
	2864	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2865	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2866	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2867
[1053]	2868	CASE ( 'qr' )
	2869	IF ( .NOT. cloud_physics ) THEN
	2870	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2871	'res cloud_physics = .TRUE.'
	2872	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2873	ELSEIF ( icloud_scheme /= 0 ) THEN
	2874	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2875	'res cloud_scheme = seifert_beheng'
	2876	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
[1115]	2877	ELSEIF ( .NOT. precipitation ) THEN
	2878	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2879	'res precipitation = .TRUE.'
	2880	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[1053]	2881	ENDIF
	2882	unit = 'kg/kg'
	2883
[1]	2884	CASE ( 'qv' )
	2885	IF ( .NOT. cloud_physics ) THEN
[215]	2886	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2887	'res cloud_physics = .TRUE.'
[226]	2888	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2889	ENDIF
	2890	unit = 'kg/kg'
	2891
[96]	2892	CASE ( 'rho' )
	2893	IF ( .NOT. ocean ) THEN
[215]	2894	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2895	'res ocean = .TRUE.'
[226]	2896	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2897	ENDIF
	2898	unit = 'kg/m3'
	2899
[1]	2900	CASE ( 's' )
	2901	IF ( .NOT. passive_scalar ) THEN
[215]	2902	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2903	'res passive_scalar = .TRUE.'
[226]	2904	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2905	ENDIF
	2906	unit = 'conc'
	2907
[96]	2908	CASE ( 'sa' )
	2909	IF ( .NOT. ocean ) THEN
[215]	2910	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2911	'res ocean = .TRUE.'
[226]	2912	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2913	ENDIF
	2914	unit = 'psu'
	2915
[978]	2916	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2917	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2918	message_string = 'illegal value for data_output: "' // &
	2919	TRIM( var ) // '" & only 2d-horizontal ' // &
	2920	'cross sections are allowed for this value'
[226]	2921	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2922	ENDIF
	2923	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2924	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2925	'res cloud_physics = .TRUE.'
[226]	2926	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2927	ENDIF
[72]	2928	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2929	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2930	'res precipitation = .TRUE.'
[226]	2931	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2932	ENDIF
	2933	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2934	message_string = 'temporal averaging of precipitation ' // &
	2935	'amount "' // TRIM( var ) // '" is not possible'
[226]	2936	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2937	ENDIF
	2938	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2939	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2940	'res precipitation = .TRUE.'
[226]	2941	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2942	ENDIF
[354]	2943	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2944	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2945	'res humidity = .TRUE.'
	2946	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2947	ENDIF
[72]	2948
[354]	2949	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2950	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2951	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2952	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2953	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2954	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2955	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2956	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2957	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2958
[1]	2959
	2960	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2961	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2962	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2963	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2964	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2965	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2966	CONTINUE
	2967
	2968	CASE DEFAULT
	2969	CALL user_check_data_output( var, unit )
	2970
	2971	IF ( unit == 'illegal' ) THEN
[215]	2972	IF ( data_output_user(1) /= ' ' ) THEN
	2973	message_string = 'illegal value for data_output or ' // &
	2974	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2975	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2976	ELSE
	2977	message_string = 'illegal value for data_output =' // &
	2978	TRIM( data_output(i) ) // '"'
[226]	2979	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2980	ENDIF
	2981	ENDIF
	2982
	2983	END SELECT
	2984	!
	2985	!-- Set the internal steering parameters appropriately
	2986	IF ( k == 0 ) THEN
	2987	do3d_no(j) = do3d_no(j) + 1
	2988	do3d(j,do3d_no(j)) = data_output(i)
	2989	do3d_unit(j,do3d_no(j)) = unit
	2990	ELSE
	2991	do2d_no(j) = do2d_no(j) + 1
	2992	do2d(j,do2d_no(j)) = data_output(i)
	2993	do2d_unit(j,do2d_no(j)) = unit
	2994	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2995	data_output_xy(j) = .TRUE.
	2996	ENDIF
	2997	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2998	data_output_xz(j) = .TRUE.
	2999	ENDIF
	3000	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	3001	data_output_yz(j) = .TRUE.
	3002	ENDIF
	3003	ENDIF
	3004
	3005	IF ( j == 1 ) THEN
	3006	!
	3007	!-- Check, if variable is already subject to averaging
	3008	found = .FALSE.
	3009	DO k = 1, doav_n
	3010	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	3011	ENDDO
	3012
	3013	IF ( .NOT. found ) THEN
	3014	doav_n = doav_n + 1
	3015	doav(doav_n) = var
	3016	ENDIF
	3017	ENDIF
	3018
	3019	i = i + 1
	3020	ENDDO
	3021
	3022	!
[376]	3023	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	3024	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	3025	WRITE( message_string, * ) 'output of averaged quantity "', &
	3026	TRIM( doav(1) ), '_av" requires to set a ', &
	3027	'non-zero & averaging interval'
	3028	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	3029	ENDIF
	3030
	3031	!
[308]	3032	!-- Check sectional planes and store them in one shared array
	3033	IF ( ANY( section_xy > nz + 1 ) ) THEN
	3034	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	3035	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	3036	ENDIF
	3037	IF ( ANY( section_xz > ny + 1 ) ) THEN
	3038	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	3039	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	3040	ENDIF
	3041	IF ( ANY( section_yz > nx + 1 ) ) THEN
	3042	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	3043	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	3044	ENDIF
[1]	3045	section(:,1) = section_xy
	3046	section(:,2) = section_xz
	3047	section(:,3) = section_yz
	3048
	3049	!
	3050	!-- Upper plot limit for 2D vertical sections
	3051	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	3052	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	3053	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	3054	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	3055	' (zu(nzt))'
[226]	3056	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	3057	ENDIF
	3058
	3059	!
	3060	!-- Upper plot limit for 3D arrays
	3061	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	3062
	3063	!
	3064	!-- Determine and check accuracy for compressed 3D plot output
	3065	IF ( do3d_compress ) THEN
	3066	!
	3067	!-- Compression only permissible on T3E machines
	3068	IF ( host(1:3) /= 't3e' ) THEN
[215]	3069	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	3070	TRIM( host ) // '"'
[226]	3071	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	3072	ENDIF
	3073
	3074	i = 1
	3075	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	3076
	3077	ilen = LEN_TRIM( do3d_comp_prec(i) )
	3078	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	3079	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3080	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3081	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3082	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3083	ENDIF
	3084
	3085	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3086	var = do3d_comp_prec(i)(1:ilen-1)
	3087
	3088	SELECT CASE ( var )
	3089
	3090	CASE ( 'u' )
	3091	j = 1
	3092	CASE ( 'v' )
	3093	j = 2
	3094	CASE ( 'w' )
	3095	j = 3
	3096	CASE ( 'p' )
	3097	j = 4
	3098	CASE ( 'pt' )
	3099	j = 5
	3100
	3101	CASE DEFAULT
[215]	3102	WRITE( message_string, * ) 'unknown variable "', &
	3103	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3104	i, ')'
[226]	3105	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3106
	3107	END SELECT
	3108
	3109	plot_3d_precision(j)%precision = prec
	3110	i = i + 1
	3111
	3112	ENDDO
	3113	ENDIF
	3114
	3115	!
	3116	!-- Check the data output format(s)
	3117	IF ( data_output_format(1) == ' ' ) THEN
	3118	!
	3119	!-- Default value
	3120	netcdf_output = .TRUE.
	3121	ELSE
	3122	i = 1
	3123	DO WHILE ( data_output_format(i) /= ' ' )
	3124
	3125	SELECT CASE ( data_output_format(i) )
	3126
	3127	CASE ( 'netcdf' )
	3128	netcdf_output = .TRUE.
	3129	CASE ( 'iso2d' )
	3130	iso2d_output = .TRUE.
	3131	CASE ( 'avs' )
	3132	avs_output = .TRUE.
	3133
	3134	CASE DEFAULT
[215]	3135	message_string = 'unknown value for data_output_format "' // &
	3136	TRIM( data_output_format(i) ) // '"'
[226]	3137	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3138
	3139	END SELECT
	3140
	3141	i = i + 1
	3142	IF ( i > 10 ) EXIT
	3143
	3144	ENDDO
[1031]	3145	ENDIF
[1]	3146
[1031]	3147	!
	3148	!-- Set output format string (used in header)
	3149	IF ( netcdf_output ) THEN
	3150
	3151	SELECT CASE ( netcdf_data_format )
	3152	CASE ( 1 )
	3153	output_format_netcdf = 'netCDF classic'
	3154	CASE ( 2 )
	3155	output_format_netcdf = 'netCDF 64bit offset'
	3156	CASE ( 3 )
	3157	output_format_netcdf = 'netCDF4/HDF5'
	3158	CASE ( 4 )
	3159	output_format_netcdf = 'netCDF4/HDF5 classic'
	3160	CASE ( 5 )
	3161	output_format_netcdf = 'parallel netCDF4/HDF5'
	3162	CASE ( 6 )
	3163	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3164
	3165	END SELECT
	3166
[1]	3167	ENDIF
	3168
[1236]	3169	#if defined( __spectra )
[1]	3170	!
[1236]	3171	!-- Check the number of spectra level to be output
	3172	i = 1
	3173	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
	3174	i = i + 1
	3175	ENDDO
	3176	i = i - 1
	3177	IF ( i == 0 ) THEN
	3178	WRITE( message_string, * ) 'no spectra levels given'
	3179	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
	3180	ENDIF
	3181	#endif
	3182
	3183	!
[410]	3184	!-- Check mask conditions
[553]	3185	DO mid = 1, max_masks
[567]	3186	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3187	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3188	masks = masks + 1
	3189	ENDIF
	3190	ENDDO
	3191
[410]	3192	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3193	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3194	'<= ', max_masks, ' (=max_masks)'
[564]	3195	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3196	ENDIF
	3197	IF ( masks > 0 ) THEN
	3198	mask_scale(1) = mask_scale_x
	3199	mask_scale(2) = mask_scale_y
	3200	mask_scale(3) = mask_scale_z
	3201	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3202	WRITE( message_string, * ) &
	3203	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3204	'must be > 0.0'
[564]	3205	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3206	ENDIF
	3207	!
	3208	!-- Generate masks for masked data output
	3209	CALL init_masks
	3210	ENDIF
	3211
	3212	!
[493]	3213	!-- Check the NetCDF data format
[924]	3214	#if ! defined ( __check )
[1034]	3215	IF ( netcdf_data_format > 2 ) THEN
[924]	3216	#if defined( __netcdf4 )
[493]	3217	CONTINUE
	3218	#else
[1031]	3219	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3220	'cpp-directive __netcdf4 given & switch ' // &
	3221	'back to 64-bit offset format'
	3222	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3223	netcdf_data_format = 2
	3224	#endif
	3225	ENDIF
[1031]	3226	IF ( netcdf_data_format > 4 ) THEN
	3227	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3228	CONTINUE
	3229	#else
	3230	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3231	'cpp-directive __netcdf4_parallel given & switch ' // &
	3232	'back to netCDF4 non-parallel output'
	3233	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3234	netcdf_data_format = netcdf_data_format - 2
[892]	3235	#endif
[1031]	3236	ENDIF
	3237	#endif
[667]	3238
[809]	3239	#if ! defined( __check )
[1031]	3240	!
[1]	3241	!-- Check netcdf precison
	3242	ldum = .FALSE.
	3243	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3244	#endif
[1]	3245	!
	3246	!-- Check, whether a constant diffusion coefficient shall be used
	3247	IF ( km_constant /= -1.0 ) THEN
	3248	IF ( km_constant < 0.0 ) THEN
[215]	3249	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3250	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3251	ELSE
	3252	IF ( prandtl_number < 0.0 ) THEN
[215]	3253	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3254	' < 0.0'
[226]	3255	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3256	ENDIF
	3257	constant_diffusion = .TRUE.
	3258
	3259	IF ( prandtl_layer ) THEN
[215]	3260	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3261	'value of km'
[226]	3262	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3263	ENDIF
	3264	ENDIF
	3265	ENDIF
	3266
	3267	!
[978]	3268	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3269	!-- potential temperature, check the width of the damping layer
[1]	3270	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3271	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3272	message_string = 'pt_damping_width out of range'
[226]	3273	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3274	ENDIF
	3275	ENDIF
	3276
	3277	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3278	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3279	message_string = 'pt_damping_width out of range'
[226]	3280	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3281	ENDIF
	3282	ENDIF
	3283
	3284	!
	3285	!-- Check value range for rif
	3286	IF ( rif_min >= rif_max ) THEN
[215]	3287	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3288	'than rif_max = ', rif_max
[226]	3289	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3290	ENDIF
	3291
	3292	!
	3293	!-- Determine upper and lower hight level indices for random perturbations
[97]	3294	IF ( disturbance_level_b == -9999999.9 ) THEN
	3295	IF ( ocean ) THEN
	3296	disturbance_level_b = zu((nzt*2)/3)
	3297	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3298	ELSE
	3299	disturbance_level_b = zu(nzb+3)
	3300	disturbance_level_ind_b = nzb + 3
	3301	ENDIF
[1]	3302	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3303	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3304	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3305	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3306	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3307	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3308	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3309	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3310	ELSE
	3311	DO k = 3, nzt-2
	3312	IF ( disturbance_level_b <= zu(k) ) THEN
	3313	disturbance_level_ind_b = k
	3314	EXIT
	3315	ENDIF
	3316	ENDDO
	3317	ENDIF
	3318
[97]	3319	IF ( disturbance_level_t == -9999999.9 ) THEN
	3320	IF ( ocean ) THEN
	3321	disturbance_level_t = zu(nzt-3)
	3322	disturbance_level_ind_t = nzt - 3
	3323	ELSE
	3324	disturbance_level_t = zu(nzt/3)
	3325	disturbance_level_ind_t = nzt / 3
	3326	ENDIF
[1]	3327	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3328	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3329	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3330	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3331	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3332	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3333	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3334	disturbance_level_b
[226]	3335	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3336	ELSE
	3337	DO k = 3, nzt-2
	3338	IF ( disturbance_level_t <= zu(k) ) THEN
	3339	disturbance_level_ind_t = k
	3340	EXIT
	3341	ENDIF
	3342	ENDDO
	3343	ENDIF
	3344
	3345	!
	3346	!-- Check again whether the levels determined this way are ok.
	3347	!-- Error may occur at automatic determination and too few grid points in
	3348	!-- z-direction.
	3349	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3350	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3351	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3352	disturbance_level_b
[226]	3353	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3354	ENDIF
	3355
	3356	!
	3357	!-- Determine the horizontal index range for random perturbations.
	3358	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3359	!-- near the inflow and the perturbation area is further limited to ...(1)
	3360	!-- after the initial phase of the flow.
	3361	dist_nxl = 0; dist_nxr = nx
	3362	dist_nys = 0; dist_nyn = ny
	3363	IF ( bc_lr /= 'cyclic' ) THEN
	3364	IF ( inflow_disturbance_begin == -1 ) THEN
	3365	inflow_disturbance_begin = MIN( 10, nx/2 )
	3366	ENDIF
	3367	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3368	THEN
[215]	3369	message_string = 'inflow_disturbance_begin out of range'
[226]	3370	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3371	ENDIF
	3372	IF ( inflow_disturbance_end == -1 ) THEN
	3373	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3374	ENDIF
	3375	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3376	THEN
[215]	3377	message_string = 'inflow_disturbance_end out of range'
[226]	3378	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3379	ENDIF
	3380	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3381	IF ( inflow_disturbance_begin == -1 ) THEN
	3382	inflow_disturbance_begin = MIN( 10, ny/2 )
	3383	ENDIF
	3384	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3385	THEN
[215]	3386	message_string = 'inflow_disturbance_begin out of range'
[226]	3387	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3388	ENDIF
	3389	IF ( inflow_disturbance_end == -1 ) THEN
	3390	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3391	ENDIF
	3392	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3393	THEN
[215]	3394	message_string = 'inflow_disturbance_end out of range'
[226]	3395	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3396	ENDIF
	3397	ENDIF
	3398
[1159]	3399	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3400	dist_nxr = nx - inflow_disturbance_begin
	3401	dist_nxl(1) = nx - inflow_disturbance_end
[1159]	3402	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3403	dist_nxl = inflow_disturbance_begin
	3404	dist_nxr(1) = inflow_disturbance_end
[73]	3405	ENDIF
[1159]	3406	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3407	dist_nyn = ny - inflow_disturbance_begin
	3408	dist_nys(1) = ny - inflow_disturbance_end
[1159]	3409	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3410	dist_nys = inflow_disturbance_begin
	3411	dist_nyn(1) = inflow_disturbance_end
	3412	ENDIF
	3413
	3414	!
[151]	3415	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3416	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[1159]	3417	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3418	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3419	'condition at the inflow boundary'
[226]	3420	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3421	ENDIF
	3422
	3423	!
[1060]	3424	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
[1103]	3425	!-- data from prerun in the first main run
	3426	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
	3427	initializing_actions /= 'read_restart_data' ) THEN
[1060]	3428	message_string = 'turbulent_inflow = .T. requires ' // &
	3429	'initializing_actions = ''cyclic_fill'' '
	3430	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3431	ENDIF
	3432
	3433	!
[151]	3434	!-- In case of turbulent inflow calculate the index of the recycling plane
	3435	IF ( turbulent_inflow ) THEN
	3436	IF ( recycling_width == 9999999.9 ) THEN
	3437	!
	3438	!-- Set the default value for the width of the recycling domain
	3439	recycling_width = 0.1 * nx * dx
	3440	ELSE
	3441	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3442	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3443	' ', recycling_width
[226]	3444	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3445	ENDIF
	3446	ENDIF
	3447	!
	3448	!-- Calculate the index
	3449	recycling_plane = recycling_width / dx
	3450	ENDIF
	3451
	3452	!
[1]	3453	!-- Check random generator
	3454	IF ( random_generator /= 'system-specific' .AND. &
	3455	random_generator /= 'numerical-recipes' ) THEN
[215]	3456	message_string = 'unknown random generator: random_generator = "' // &
	3457	TRIM( random_generator ) // '"'
[226]	3458	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3459	ENDIF
	3460
	3461	!
	3462	!-- Determine damping level index for 1D model
	3463	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3464	IF ( damp_level_1d == -1.0 ) THEN
	3465	damp_level_1d = zu(nzt+1)
	3466	damp_level_ind_1d = nzt + 1
	3467	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3468	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3469	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3470	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3471	ELSE
	3472	DO k = 1, nzt+1
	3473	IF ( damp_level_1d <= zu(k) ) THEN
	3474	damp_level_ind_1d = k
	3475	EXIT
	3476	ENDIF
	3477	ENDDO
	3478	ENDIF
	3479	ENDIF
[215]	3480
[1]	3481	!
	3482	!-- Check some other 1d-model parameters
	3483	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3484	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3485	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3486	'" is unknown'
[226]	3487	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3488	ENDIF
	3489	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3490	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3491	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3492	'" is unknown'
[226]	3493	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3494	ENDIF
	3495
	3496	!
	3497	!-- Set time for the next user defined restart (time_restart is the
	3498	!-- internal parameter for steering restart events)
	3499	IF ( restart_time /= 9999999.9 ) THEN
[291]	3500	IF ( restart_time > time_since_reference_point ) THEN
	3501	time_restart = restart_time
	3502	ENDIF
[1]	3503	ELSE
	3504	!
	3505	!-- In case of a restart run, set internal parameter to default (no restart)
	3506	!-- if the NAMELIST-parameter restart_time is omitted
	3507	time_restart = 9999999.9
	3508	ENDIF
	3509
	3510	!
	3511	!-- Set default value of the time needed to terminate a model run
	3512	IF ( termination_time_needed == -1.0 ) THEN
	3513	IF ( host(1:3) == 'ibm' ) THEN
	3514	termination_time_needed = 300.0
	3515	ELSE
	3516	termination_time_needed = 35.0
	3517	ENDIF
	3518	ENDIF
	3519
	3520	!
	3521	!-- Check the time needed to terminate a model run
	3522	IF ( host(1:3) == 't3e' ) THEN
	3523	!
	3524	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3525	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3526	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3527	WRITE( message_string, * ) 'termination_time_needed = ', &
	3528	termination_time_needed, ' must be > 30.0 on host "', &
	3529	TRIM( host ), '"'
[226]	3530	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3531	ENDIF
	3532	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3533	!
	3534	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3535	!-- because the job time consumed before executing palm (for compiling,
	3536	!-- copying of files, etc.) has to be regarded
	3537	IF ( termination_time_needed < 300.0 ) THEN
[215]	3538	WRITE( message_string, * ) 'termination_time_needed = ', &
	3539	termination_time_needed, ' should be >= 300.0 on host "', &
	3540	TRIM( host ), '"'
[226]	3541	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3542	ENDIF
	3543	ENDIF
	3544
[217]	3545	!
[240]	3546	!-- Check pressure gradient conditions
	3547	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3548	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3549	'w are .TRUE. but one of them must be .FALSE.'
[240]	3550	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3551	ENDIF
	3552	IF ( dp_external ) THEN
	3553	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3554	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3555	' of range'
	3556	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3557	ENDIF
	3558	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3559	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3560	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3561	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3562	ENDIF
	3563	ENDIF
	3564	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3565	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3566	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3567	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3568	ENDIF
[241]	3569	IF ( conserve_volume_flow ) THEN
	3570	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3571
	3572	conserve_volume_flow_mode = 'initial_profiles'
	3573
[241]	3574	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3575	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3576	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3577	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3578	conserve_volume_flow_mode
	3579	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3580	ENDIF
[667]	3581	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3582	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3583	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3584	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3585	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3586	ENDIF
	3587	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3588	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3589	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3590	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3591	' or ''bulk_velocity'''
	3592	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3593	ENDIF
	3594	ENDIF
	3595	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3596	( .NOT. conserve_volume_flow .OR. &
	3597	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3598	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3599	'conserve_volume_flow = .T. and ', &
[241]	3600	'conserve_volume_flow_mode = ''bulk_velocity'''
	3601	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3602	ENDIF
[240]	3603
	3604	!
[264]	3605	!-- Check particle attributes
	3606	IF ( particle_color /= 'none' ) THEN
	3607	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3608	particle_color /= 'z' ) THEN
	3609	message_string = 'illegal value for parameter particle_color: ' // &
	3610	TRIM( particle_color)
	3611	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3612	ELSE
	3613	IF ( color_interval(2) <= color_interval(1) ) THEN
	3614	message_string = 'color_interval(2) <= color_interval(1)'
	3615	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3616	ENDIF
	3617	ENDIF
	3618	ENDIF
	3619
	3620	IF ( particle_dvrpsize /= 'none' ) THEN
	3621	IF ( particle_dvrpsize /= 'absw' ) THEN
	3622	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3623	' ' // TRIM( particle_color)
	3624	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3625	ELSE
	3626	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3627	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3628	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3629	ENDIF
	3630	ENDIF
	3631	ENDIF
	3632
	3633	!
[1241]	3634	!-- Check nudging and large scale forcing from external file
	3635	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
	3636	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
	3637	'Surface fluxes and geostrophic wind should be &'// &
	3638	'prescribed in file LSF_DATA'
	3639	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
	3640	ENDIF
	3641
	3642	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
	3643	bc_ns /= 'cyclic' ) ) THEN
	3644	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
	3645	'the usage of large scale forcing from external file.'
	3646	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
	3647	ENDIF
	3648
	3649	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
	3650	message_string = 'The usage of large scale forcing from external &'//&
	3651	'file LSF_DATA requires humidity = .T..'
	3652	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
	3653	ENDIF
	3654
	3655	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
	3656	message_string = 'The usage of large scale forcing from external &'//&
	3657	'file LSF_DATA is not implemented for non-flat topography'
	3658	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
	3659	ENDIF
	3660
	3661	IF ( large_scale_forcing .AND. ocean ) THEN
	3662	message_string = 'The usage of large scale forcing from external &'//&
	3663	'file LSF_DATA is not implemented for ocean runs'
	3664	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
	3665	ENDIF
	3666	!
[217]	3667	!-- Check &userpar parameters
	3668	CALL user_check_parameters
[1]	3669
[217]	3670
[667]	3671
[1]	3672	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |