Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1217

Last change on this file since 1217 was 1217, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 139.9 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1054]	22	!
[1217]	23	!
[1054]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1217 2013-08-26 11:30:05Z raasch $
	27	!
[1217]	28	! 1216 2013-08-26 09:31:42Z raasch
	29	! check for transpose_compute_overlap (temporary)
	30	!
[1215]	31	! 1214 2013-08-21 12:29:17Z kanani
	32	! additional check for simultaneous use of vertical grid stretching
	33	! and particle advection
	34	!
[1213]	35	! 1212 2013-08-15 08:46:27Z raasch
	36	! checks for poisfft_hybrid removed
	37	!
[1211]	38	! 1210 2013-08-14 10:58:20Z raasch
	39	! check for fftw
	40	!
[1182]	41	! 1179 2013-06-14 05:57:58Z raasch
	42	! checks and settings of buoyancy parameters and switches revised,
	43	! initial profile for rho added to hom (id=77)
	44	!
[1175]	45	! 1174 2013-05-31 10:28:08Z gryschka
	46	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
	47	!
[1160]	48	! 1159 2013-05-21 11:58:22Z fricke
	49	! bc_lr/ns_dirneu/neudir removed
	50	!
[1116]	51	! 1115 2013-03-26 18:16:16Z hoffmann
	52	! unused variables removed
	53	! drizzle can be used without precipitation
	54	!
[1112]	55	! 1111 2013-03-08 23:54:10Z raasch
	56	! ibc_p_b = 2 removed
	57	!
[1104]	58	! 1103 2013-02-20 02:15:53Z raasch
	59	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
	60	!
[1093]	61	! 1092 2013-02-02 11:24:22Z raasch
	62	! unused variables removed
	63	!
[1070]	64	! 1069 2012-11-28 16:18:43Z maronga
	65	! allow usage of topography in combination with cloud physics
	66	!
[1066]	67	! 1065 2012-11-22 17:42:36Z hoffmann
	68	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	69	! precipitation in order to save computational resources.
	70	!
[1061]	71	! 1060 2012-11-21 07:19:51Z raasch
	72	! additional check for parameter turbulent_inflow
	73	!
[1054]	74	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	75	! necessary changes for the new two-moment cloud physics scheme added:
	76	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	77	! - plant_canopy is not allowed
	78	! - currently, only cache loop_optimization is allowed
	79	! - initial profiles of nr, qr
	80	! - boundary condition of nr, qr
	81	! - check output quantities (qr, nr, prr)
[979]	82	!
[1037]	83	! 1036 2012-10-22 13:43:42Z raasch
	84	! code put under GPL (PALM 3.9)
	85	!
[1035]	86	! 1031/1034 2012-10-22 11:32:49Z raasch
	87	! check of netcdf4 parallel file support
	88	!
[1020]	89	! 1019 2012-09-28 06:46:45Z raasch
	90	! non-optimized version of prognostic_equations not allowed any more
	91	!
[1017]	92	! 1015 2012-09-27 09:23:24Z raasch
	93	! acc allowed for loop optimization,
	94	! checks for adjustment of mixing length to the Prandtl mixing length removed
	95	!
[1004]	96	! 1003 2012-09-14 14:35:53Z raasch
	97	! checks for cases with unequal subdomain sizes removed
	98	!
[1002]	99	! 1001 2012-09-13 14:08:46Z raasch
	100	! all actions concerning leapfrog- and upstream-spline-scheme removed
	101	!
[997]	102	! 996 2012-09-07 10:41:47Z raasch
	103	! little reformatting
[1001]	104
[979]	105	! 978 2012-08-09 08:28:32Z fricke
[978]	106	! setting of bc_lr/ns_dirneu/neudir
	107	! outflow damping layer removed
	108	! check for z0h*
	109	! check for pt_damping_width
[667]	110	!
[965]	111	! 964 2012-07-26 09:14:24Z raasch
	112	! check of old profil-parameters removed
	113	!
[941]	114	! 940 2012-07-09 14:31:00Z raasch
	115	! checks for parameter neutral
	116	!
[925]	117	! 924 2012-06-06 07:44:41Z maronga
	118	! Bugfix: preprocessor directives caused error during compilation
	119	!
[893]	120	! 892 2012-05-02 13:51:44Z maronga
	121	! Bugfix for parameter file check ( excluding __netcdf4 )
	122	!
[867]	123	! 866 2012-03-28 06:44:41Z raasch
	124	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	125	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	126	! timestep
	127	!
[863]	128	! 861 2012-03-26 14:18:34Z suehring
	129	! Check for topography and ws-scheme removed.
	130	! Check for loop_optimization = 'vector' and ws-scheme removed.
	131	!
[846]	132	! 845 2012-03-07 10:23:05Z maronga
	133	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	134	!
[829]	135	! 828 2012-02-21 12:00:36Z raasch
	136	! check of collision_kernel extended
	137	!
[826]	138	! 825 2012-02-19 03:03:44Z raasch
	139	! check for collision_kernel and curvature_solution_effects
	140	!
[810]	141	! 809 2012-01-30 13:32:58Z maronga
	142	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	143	!
[808]	144	! 807 2012-01-25 11:53:51Z maronga
	145	! New cpp directive "__check" implemented which is used by check_namelist_files
	146	!
[775]	147	! 774 2011-10-27 13:34:16Z letzel
	148	! bugfix for prescribed u,v-profiles
	149	!
[768]	150	! 767 2011-10-14 06:39:12Z raasch
	151	! Calculating u,v-profiles from given profiles by linear interpolation.
	152	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	153	!
[708]	154	! 707 2011-03-29 11:39:40Z raasch
	155	! setting of bc_lr/ns_dirrad/raddir
	156	!
	157	! 689 2011-02-20 19:31:12z gryschka
[690]	158	! Bugfix for some logical expressions
	159	! (syntax was not compatible with all compilers)
[687]	160	!
[690]	161	! 680 2011-02-04 23:16:06Z gryschka
[681]	162	! init_vortex is not allowed with volume_flow_control
[668]	163	!
[674]	164	! 673 2011-01-18 16:19:48Z suehring
	165	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	166	!
[668]	167	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	168	! Exchange of parameters between ocean and atmosphere via PE0
	169	! Check for illegal combination of ws-scheme and timestep scheme.
	170	! Check for topography and ws-scheme.
	171	! Check for not cyclic boundary conditions in combination with ws-scheme and
	172	! loop_optimization = 'vector'.
	173	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	174	! Different processor/grid topology in atmosphere and ocean is now allowed!
	175	! Bugfixes in checking for conserve_volume_flow_mode
[601]	176	! 600 2010-11-24 16:10:51Z raasch
	177	! change due to new default value of surface_waterflux
[581]	178	! 580 2010-10-05 13:59:11Z heinze
[601]	179	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	180	!
[568]	181	! 567 2010-10-01 10:46:30Z helmke
	182	! calculating masks changed
	183	!
[565]	184	! 564 2010-09-30 13:18:59Z helmke
	185	! palm message identifiers of masked output changed, 20 replaced by max_masks
	186	!
[554]	187	! 553 2010-09-01 14:09:06Z weinreis
	188	! masks is calculated and removed from inipar
[532]	189	!
	190	! 531 2010-04-21 06:47:21Z heinze
	191	! Bugfix: unit of hyp changed to dbar
[392]	192	!
[525]	193	! 524 2010-03-30 02:04:51Z raasch
	194	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	195	!
[494]	196	! 493 2010-03-01 08:30:24Z raasch
	197	! netcdf_data_format is checked
	198	!
[449]	199	! 411 2009-12-11 14:15:58Z heinze
	200	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	201	! Initialization of large scale vertical motion (subsidence/ascent)
	202	!
	203	! 410 2009-12-04 17:05:40Z letzel
	204	! masked data output
	205	!
[392]	206	! 388 2009-09-23 09:40:33Z raasch
[388]	207	! Check profiles fpr prho and hyp.
[376]	208	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	209	! interval has been set, respective error message is included
[366]	210	! bc_lr_cyc and bc_ns_cyc are set,
[328]	211	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	212	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	213	! Coupling with independent precursor runs.
[264]	214	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	215	! Bugfix: pressure included for profile output
[240]	216	! Check pressure gradient conditions
[256]	217	! topography_grid_convention moved from user_check_parameters
	218	! 'single_street_canyon'
[367]	219	! Added shf* and qsws* to the list of available output data
[226]	220	!
	221	! 222 2009-01-12 16:04:16Z letzel
[217]	222	! +user_check_parameters
[213]	223	! Output of messages replaced by message handling routine.
[206]	224	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	225	! deleted __mpi2 directives
[222]	226	! Check that PALM is called with mrun -K parallel for coupling
[198]	227	!
	228	! 197 2008-09-16 15:29:03Z raasch
[177]	229	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	230	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	231	!
	232	! Strict grid matching along z is not needed for mg-solver.
[153]	233	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	234	! Case of reading data for recycling included in initializing_actions,
[197]	235	! check of turbulent_inflow and calculation of recycling_plane.
	236	! q*2 profile added
[139]	237	!
	238	! 138 2007-11-28 10:03:58Z letzel
[138]	239	! Plant canopy added
[132]	240	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	241	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	242	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	243	!
	244	! 109 2007-08-28 15:26:47Z letzel
[102]	245	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	246	! conditions for temperature and fluxes) in case of coupled runs.
	247	! +profiles for wp and w"e
[104]	248	! Bugfix: Error message concerning output of particle concentration (pc)
	249	! modified
[108]	250	! More checks and more default values for coupled runs
	251	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	252	! cloud_physics = .T.)
	253	! Rayleigh damping for ocean fixed.
[109]	254	! Check and, if necessary, set default value for dt_coupling
[98]	255	!
	256	! 97 2007-06-21 08:23:15Z raasch
[97]	257	! Initial salinity profile is calculated, salinity boundary conditions are
	258	! checked,
[94]	259	! z_max_do1d is checked only in case of ocean = .f.,
[97]	260	! +initial temperature and geostrophic velocity profiles for the ocean version,
	261	! use_pt_reference renamed use_reference
[77]	262	!
[90]	263	! 89 2007-05-25 12:08:31Z raasch
	264	! Check for user-defined profiles
	265	!
[77]	266	! 75 2007-03-22 09:54:05Z raasch
[51]	267	! "by_user" allowed as initializing action, -data_output_ts,
[63]	268	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	269	! and pt_reference are checked, moisture renamed humidity,
[72]	270	! output of precipitation amount/rate and roughnes length + check
[73]	271	! possible negative humidities are avoided in initial profile,
[75]	272	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	273	! revision added to run_description_header
[1]	274	!
[39]	275	! 20 2007-02-26 00:12:32Z raasch
	276	! Temperature and humidity gradients at top are now calculated for nzt+1,
	277	! top_heatflux and respective boundary condition bc_pt_t is checked
	278	!
[3]	279	! RCS Log replace by Id keyword, revision history cleaned up
	280	!
[1]	281	! Revision 1.61 2006/08/04 14:20:25 raasch
	282	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	283	! use_upstream_for_tke, default value for dt_dopts,
	284	! generation of file header moved from routines palm and header to here
	285	!
	286	! Revision 1.1 1997/08/26 06:29:23 raasch
	287	! Initial revision
	288	!
	289	!
	290	! Description:
	291	! ------------
	292	! Check control parameters and deduce further quantities.
	293	!------------------------------------------------------------------------------!
	294
	295	USE arrays_3d
[824]	296	USE cloud_parameters
[1]	297	USE constants
	298	USE control_parameters
[264]	299	USE dvrp_variables
[1]	300	USE grid_variables
	301	USE indices
	302	USE model_1d
	303	USE netcdf_control
	304	USE particle_attributes
	305	USE pegrid
	306	USE profil_parameter
[411]	307	USE subsidence_mod
[1]	308	USE statistics
	309	USE transpose_indices
	310
	311	IMPLICIT NONE
	312
	313	CHARACTER (LEN=1) :: sq
	314	CHARACTER (LEN=6) :: var
	315	CHARACTER (LEN=7) :: unit
	316	CHARACTER (LEN=8) :: date
	317	CHARACTER (LEN=10) :: time
[102]	318	CHARACTER (LEN=40) :: coupling_string
[1]	319	CHARACTER (LEN=100) :: action
	320
[1092]	321	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	322	LOGICAL :: found, ldum
[1092]	323	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	324
	325	!
[1216]	326	!-- Check for overlap combinations, which are not realized yet
	327	IF ( transpose_compute_overlap ) THEN
	328	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
	329	#if defined( __openacc )
	330	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
	331	#endif
	332	ENDIF
	333
	334	!
[1]	335	!-- Warning, if host is not set
	336	IF ( host(1:1) == ' ' ) THEN
[213]	337	message_string = '"host" is not set. Please check that environment ' // &
	338	'variable "localhost" & is set before running PALM'
[226]	339	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	340	ENDIF
	341
	342	!
[102]	343	!-- Check the coupling mode
	344	IF ( coupling_mode /= 'uncoupled' .AND. &
	345	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	346	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	347	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	348	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	349	ENDIF
	350
	351	!
[108]	352	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	353	IF ( coupling_mode /= 'uncoupled') THEN
[213]	354
[108]	355	IF ( dt_coupling == 9999999.9 ) THEN
[213]	356	message_string = 'dt_coupling is not set but required for coup' // &
	357	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	358	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	359	ENDIF
[213]	360
[206]	361	#if defined( __parallel )
[807]	362
	363	!
	364	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	365	!-- program.
	366	!-- check_namelist_files will need the following information of the other
	367	!-- model (atmosphere/ocean).
[845]	368	! dt_coupling = remote
	369	! dt_max = remote
	370	! restart_time = remote
	371	! dt_restart= remote
	372	! simulation_time_since_reference = remote
	373	! dx = remote
[807]	374
	375
[809]	376	#if ! defined( __check )
[667]	377	IF ( myid == 0 ) THEN
	378	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	379	ierr )
	380	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	381	status, ierr )
	382	ENDIF
	383	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	384	#endif
[108]	385	IF ( dt_coupling /= remote ) THEN
[213]	386	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	387	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	388	'dt_coupling_remote = ', remote
[226]	389	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	390	ENDIF
[109]	391	IF ( dt_coupling <= 0.0 ) THEN
[809]	392	#if ! defined( __check )
[667]	393	IF ( myid == 0 ) THEN
	394	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	395	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	396	status, ierr )
	397	ENDIF
	398	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	399	#endif
[109]	400	dt_coupling = MAX( dt_max, remote )
[213]	401	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	402	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	403	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	404	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	405	ENDIF
[809]	406	#if ! defined( __check )
[667]	407	IF ( myid == 0 ) THEN
	408	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	409	ierr )
	410	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	411	status, ierr )
	412	ENDIF
	413	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	414	#endif
[108]	415	IF ( restart_time /= remote ) THEN
[213]	416	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	417	'": restart_time = ', restart_time, '& is not equal to ', &
	418	'restart_time_remote = ', remote
[226]	419	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	420	ENDIF
[809]	421	#if ! defined( __check )
[667]	422	IF ( myid == 0 ) THEN
	423	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	424	ierr )
	425	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	426	status, ierr )
	427	ENDIF
	428	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	429	#endif
[108]	430	IF ( dt_restart /= remote ) THEN
[213]	431	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	432	'": dt_restart = ', dt_restart, '& is not equal to ', &
	433	'dt_restart_remote = ', remote
[226]	434	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	435	ENDIF
[213]	436
[291]	437	simulation_time_since_reference = end_time - coupling_start_time
[809]	438	#if ! defined( __check )
[667]	439	IF ( myid == 0 ) THEN
	440	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	441	14, comm_inter, ierr )
	442	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	443	status, ierr )
	444	ENDIF
	445	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	446	#endif
[291]	447	IF ( simulation_time_since_reference /= remote ) THEN
[213]	448	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	449	'": simulation_time_since_reference = ', &
	450	simulation_time_since_reference, '& is not equal to ', &
	451	'simulation_time_since_reference_remote = ', remote
[226]	452	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	453	ENDIF
[213]	454
[809]	455	#if ! defined( __check )
[667]	456	IF ( myid == 0 ) THEN
	457	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	458	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	459	status, ierr )
[108]	460	ENDIF
[667]	461	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	462
[807]	463	#endif
[667]	464	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	465
	466	IF ( dx < remote ) THEN
	467	WRITE( message_string, * ) 'coupling mode "', &
	468	TRIM( coupling_mode ), &
	469	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	470	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	471	ENDIF
	472
	473	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	474	WRITE( message_string, * ) 'coupling mode "', &
	475	TRIM( coupling_mode ), &
	476	'": Domain size in x-direction is not equal in ocean and atmosphere'
	477	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	478	ENDIF
	479
[108]	480	ENDIF
[213]	481
[809]	482	#if ! defined( __check )
[667]	483	IF ( myid == 0) THEN
	484	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	485	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	486	status, ierr )
[108]	487	ENDIF
[667]	488	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	489	#endif
[667]	490	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	491
	492	IF ( dy < remote ) THEN
	493	WRITE( message_string, * ) 'coupling mode "', &
	494	TRIM( coupling_mode ), &
	495	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	496	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	497	ENDIF
	498
	499	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	500	WRITE( message_string, * ) 'coupling mode "', &
	501	TRIM( coupling_mode ), &
	502	'": Domain size in y-direction is not equal in ocean and atmosphere'
	503	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	504	ENDIF
	505
	506	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	507	WRITE( message_string, * ) 'coupling mode "', &
	508	TRIM( coupling_mode ), &
	509	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	510	' atmosphere'
	511	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	512	ENDIF
	513
	514	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	515	WRITE( message_string, * ) 'coupling mode "', &
	516	TRIM( coupling_mode ), &
	517	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	518	' atmosphere'
	519	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	520	ENDIF
	521
[108]	522	ENDIF
[222]	523	#else
	524	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	525	' ''mrun -K parallel'''
[226]	526	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	527	#endif
	528	ENDIF
	529
[809]	530	#if defined( __parallel ) && ! defined ( __check )
[108]	531	!
	532	!-- Exchange via intercommunicator
[667]	533	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	534	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	535	ierr )
[667]	536	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	537	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	538	comm_inter, status, ierr )
[108]	539	ENDIF
[667]	540	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	541
[108]	542	#endif
	543
	544
	545	!
[1]	546	!-- Generate the file header which is used as a header for most of PALM's
	547	!-- output files
	548	CALL DATE_AND_TIME( date, time )
	549	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	550	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	551	IF ( coupling_mode == 'uncoupled' ) THEN
	552	coupling_string = ''
	553	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	554	coupling_string = ' coupled (atmosphere)'
	555	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	556	coupling_string = ' coupled (ocean)'
	557	ENDIF
[1]	558
[102]	559	WRITE ( run_description_header, &
	560	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	561	TRIM( version ), TRIM( revision ), 'run: ', &
	562	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	563	'host: ', TRIM( host ), run_date, run_time
[1]	564
	565	!
[63]	566	!-- Check the general loop optimization method
	567	IF ( loop_optimization == 'default' ) THEN
	568	IF ( host(1:3) == 'nec' ) THEN
	569	loop_optimization = 'vector'
	570	ELSE
	571	loop_optimization = 'cache'
	572	ENDIF
	573	ENDIF
	574
[1015]	575	SELECT CASE ( TRIM( loop_optimization ) )
	576
[1019]	577	CASE ( 'acc', 'cache', 'vector' )
[1015]	578	CONTINUE
	579
	580	CASE DEFAULT
	581	message_string = 'illegal value given for loop_optimization: "' // &
	582	TRIM( loop_optimization ) // '"'
	583	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	584
	585	END SELECT
	586
[63]	587	!
[1214]	588	!-- Check if vertical grid stretching is used together with particles
	589	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
	590	message_string = 'Vertical grid stretching is not allowed together ' // &
	591	'with particle advection.'
	592	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
	593	ENDIF
	594
	595	!
[1]	596	!-- Check topography setting (check for illegal parameter combinations)
	597	IF ( topography /= 'flat' ) THEN
	598	action = ' '
[861]	599	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	600	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	601	ENDIF
[861]	602	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	603	THEN
[1]	604	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	605	ENDIF
[114]	606	IF ( psolver == 'sor' ) THEN
[1]	607	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	608	ENDIF
	609	IF ( sloping_surface ) THEN
	610	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	611	ENDIF
	612	IF ( galilei_transformation ) THEN
	613	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	614	ENDIF
[1115]	615	IF ( cloud_physics ) THEN
	616	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	617	ENDIF
[1]	618	IF ( cloud_droplets ) THEN
[1115]	619	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
[1]	620	ENDIF
	621	IF ( .NOT. prandtl_layer ) THEN
	622	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	623	ENDIF
	624	IF ( action /= ' ' ) THEN
[213]	625	message_string = 'a non-flat topography does not allow ' // &
	626	TRIM( action )
[226]	627	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	628	ENDIF
[256]	629	!
	630	!-- In case of non-flat topography, check whether the convention how to
	631	!-- define the topography grid has been set correctly, or whether the default
	632	!-- is applicable. If this is not possible, abort.
	633	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	634	IF ( TRIM( topography ) /= 'single_building' .AND. &
	635	TRIM( topography ) /= 'single_street_canyon' .AND. &
	636	TRIM( topography ) /= 'read_from_file' ) THEN
	637	!-- The default value is not applicable here, because it is only valid
	638	!-- for the two standard cases 'single_building' and 'read_from_file'
	639	!-- defined in init_grid.
	640	WRITE( message_string, * ) &
	641	'The value for "topography_grid_convention" ', &
	642	'is not set. Its default value is & only valid for ', &
	643	'"topography" = ''single_building'', ', &
	644	'''single_street_canyon'' & or ''read_from_file''.', &
	645	' & Choose ''cell_edge'' or ''cell_center''.'
	646	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	647	ELSE
	648	!-- The default value is applicable here.
	649	!-- Set convention according to topography.
	650	IF ( TRIM( topography ) == 'single_building' .OR. &
	651	TRIM( topography ) == 'single_street_canyon' ) THEN
	652	topography_grid_convention = 'cell_edge'
	653	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	654	topography_grid_convention = 'cell_center'
	655	ENDIF
	656	ENDIF
	657	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	658	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	659	WRITE( message_string, * ) &
	660	'The value for "topography_grid_convention" is ', &
	661	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	662	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	663	ENDIF
	664
[1]	665	ENDIF
[94]	666
[1]	667	!
[94]	668	!-- Check ocean setting
	669	IF ( ocean ) THEN
[332]	670
[94]	671	action = ' '
	672	IF ( action /= ' ' ) THEN
[213]	673	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	674	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	675	ENDIF
	676
[332]	677	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	678	TRIM( coupling_char ) == '_O' ) THEN
[343]	679
[94]	680	!
[332]	681	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	682	!-- ocean run (this setting is done via mrun-option -y)
[343]	683
[291]	684	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	685	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	686	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	687
[291]	688	ENDIF
	689	!
[1053]	690	!-- Check cloud scheme
	691	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	692	icloud_scheme = 0
	693	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	694	icloud_scheme = 1
	695	ELSE
	696	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	697	TRIM( cloud_scheme ) // '"'
	698	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	699	ENDIF
	700	!
[1]	701	!-- Check whether there are any illegal values
	702	!-- Pressure solver:
[1212]	703	IF ( psolver /= 'poisfft' .AND. &
[1]	704	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	705	message_string = 'unknown solver for perturbation pressure: psolver' // &
	706	' = "' // TRIM( psolver ) // '"'
[226]	707	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	708	ENDIF
	709
	710	IF ( psolver == 'multigrid' ) THEN
	711	IF ( cycle_mg == 'w' ) THEN
	712	gamma_mg = 2
	713	ELSEIF ( cycle_mg == 'v' ) THEN
	714	gamma_mg = 1
	715	ELSE
[213]	716	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	717	TRIM( cycle_mg ) // '"'
[226]	718	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	719	ENDIF
	720	ENDIF
	721
	722	IF ( fft_method /= 'singleton-algorithm' .AND. &
	723	fft_method /= 'temperton-algorithm' .AND. &
[1210]	724	fft_method /= 'fftw' .AND. &
[1]	725	fft_method /= 'system-specific' ) THEN
[213]	726	message_string = 'unknown fft-algorithm: fft_method = "' // &
	727	TRIM( fft_method ) // '"'
[226]	728	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	729	ENDIF
[667]	730
	731	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	732	.NOT. call_psolver_at_all_substeps ) THEN
[667]	733	message_string = 'psolver must be called at each RK3 substep when "'//&
	734	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	735	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	736	END IF
[1]	737	!
	738	!-- Advection schemes:
[1001]	739	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	740	THEN
[214]	741	message_string = 'unknown advection scheme: momentum_advec = "' // &
	742	TRIM( momentum_advec ) // '"'
[226]	743	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	744	ENDIF
[1001]	745	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	746	.AND. ( timestep_scheme == 'euler' .OR. &
	747	timestep_scheme == 'runge-kutta-2' ) ) &
	748	THEN
[667]	749	message_string = 'momentum_advec or scalar_advec = "' &
	750	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	751	TRIM( timestep_scheme ) // '"'
[226]	752	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	753	ENDIF
[667]	754	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	755	scalar_advec /= 'bc-scheme' ) &
	756	THEN
[214]	757	message_string = 'unknown advection scheme: scalar_advec = "' // &
	758	TRIM( scalar_advec ) // '"'
[226]	759	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	760	ENDIF
[1019]	761	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	762	THEN
	763	message_string = 'advection_scheme scalar_advec = "' &
	764	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	765	TRIM( loop_optimization ) // '"'
	766	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	767	ENDIF
[1]	768
	769	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	770	use_upstream_for_tke = .TRUE.
[214]	771	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	772	'use_sgs_for_particles = .TRUE.'
[226]	773	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	774	ENDIF
	775
[824]	776	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	777	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	778	'curvature_solution_effects = .TRUE.'
	779	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	780	ENDIF
	781
[1]	782	!
[1019]	783	!-- Set LOGICAL switches to enhance performance
	784	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	785	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	786
	787	!
[1]	788	!-- Timestep schemes:
	789	SELECT CASE ( TRIM( timestep_scheme ) )
	790
	791	CASE ( 'euler' )
	792	intermediate_timestep_count_max = 1
	793
	794	CASE ( 'runge-kutta-2' )
	795	intermediate_timestep_count_max = 2
	796
	797	CASE ( 'runge-kutta-3' )
	798	intermediate_timestep_count_max = 3
	799
	800	CASE DEFAULT
[214]	801	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	802	TRIM( timestep_scheme ) // '"'
[226]	803	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	804
	805	END SELECT
	806
[667]	807	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	808	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	809	message_string = 'momentum advection scheme "' // &
	810	TRIM( momentum_advec ) // '" & does not work with ' // &
	811	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	812	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	813	ENDIF
	814
[825]	815	!
	816	!-- Collision kernels:
	817	SELECT CASE ( TRIM( collision_kernel ) )
	818
[828]	819	CASE ( 'hall', 'hall_fast' )
[825]	820	hall_kernel = .TRUE.
	821
	822	CASE ( 'palm' )
	823	palm_kernel = .TRUE.
	824
[828]	825	CASE ( 'wang', 'wang_fast' )
[825]	826	wang_kernel = .TRUE.
	827
	828	CASE ( 'none' )
	829
	830
	831	CASE DEFAULT
	832	message_string = 'unknown collision kernel: collision_kernel = "' // &
	833	TRIM( collision_kernel ) // '"'
	834	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	835
	836	END SELECT
[828]	837	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	838
[147]	839	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	840	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	841	!
[214]	842	!-- No restart run: several initialising actions are possible
[1]	843	action = initializing_actions
	844	DO WHILE ( TRIM( action ) /= '' )
	845	position = INDEX( action, ' ' )
	846	SELECT CASE ( action(1:position-1) )
	847
	848	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	849	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	850	action = action(position+1:)
	851
	852	CASE DEFAULT
[214]	853	message_string = 'initializing_action = "' // &
	854	TRIM( action ) // '" unkown or not allowed'
[226]	855	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	856
	857	END SELECT
	858	ENDDO
	859	ENDIF
[214]	860
[680]	861	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	862	conserve_volume_flow ) THEN
	863	message_string = 'initializing_actions = "initialize_vortex"' // &
	864	' ist not allowed with conserve_volume_flow = .T.'
	865	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	866	ENDIF
	867
	868
[1]	869	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	870	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	871	message_string = 'initializing_actions = "set_constant_profiles"' // &
	872	' and "set_1d-model_profiles" are not allowed ' // &
	873	'simultaneously'
[226]	874	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	875	ENDIF
[214]	876
[46]	877	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	878	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	879	message_string = 'initializing_actions = "set_constant_profiles"' // &
	880	' and "by_user" are not allowed simultaneously'
[226]	881	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	882	ENDIF
[214]	883
[46]	884	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	885	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	886	message_string = 'initializing_actions = "by_user" and ' // &
	887	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	888	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	889	ENDIF
[1]	890
[75]	891	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	892	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	893	'not allowed with humidity = ', humidity
[226]	894	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	895	ENDIF
	896
[72]	897	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	898	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	899	'not allowed with cloud_physics = ', cloud_physics
[226]	900	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	901	ENDIF
	902
[75]	903	IF ( humidity .AND. sloping_surface ) THEN
[214]	904	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	905	'are not allowed simultaneously'
[226]	906	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	907	ENDIF
	908
[75]	909	IF ( passive_scalar .AND. humidity ) THEN
[214]	910	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	911	'is not allowed simultaneously'
[226]	912	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	913	ENDIF
	914
[138]	915	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	916	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	917	'coefficient & given value is drag_coefficient = 0.0'
[226]	918	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	919	ENDIF
	920
[1053]	921	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	922	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	923	' seifert_beheng'
	924	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	925	ENDIF
	926
	927	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	928	icloud_scheme == 0 ) THEN
	929	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	930	'loop_optimization = cache'
	931	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	932	ENDIF
	933
[1115]	934	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	935	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
	936	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
	937	! 'precipitation = .TRUE. or drizzle = .TRUE.'
	938	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	939	! ENDIF
[1065]	940
[1]	941	!
	942	!-- In case of no model continuation run, check initialising parameters and
	943	!-- deduce further quantities
	944	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	945
	946	!
[767]	947	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	948	pt_init = pt_surface
[1053]	949	IF ( humidity ) THEN
	950	q_init = q_surface
	951	ENDIF
[94]	952	IF ( ocean ) sa_init = sa_surface
	953	IF ( passive_scalar ) q_init = s_surface
[138]	954	IF ( plant_canopy ) lad = 0.0
[1]	955
	956	!
	957	!--
	958	!-- If required, compute initial profile of the geostrophic wind
	959	!-- (component ug)
	960	i = 1
	961	gradient = 0.0
[97]	962
	963	IF ( .NOT. ocean ) THEN
	964
	965	ug_vertical_gradient_level_ind(1) = 0
	966	ug(0) = ug_surface
	967	DO k = 1, nzt+1
[177]	968	IF ( i < 11 ) THEN
	969	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	970	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	971	gradient = ug_vertical_gradient(i) / 100.0
	972	ug_vertical_gradient_level_ind(i) = k - 1
	973	i = i + 1
[1]	974	ENDIF
[177]	975	ENDIF
[97]	976	IF ( gradient /= 0.0 ) THEN
	977	IF ( k /= 1 ) THEN
	978	ug(k) = ug(k-1) + dzu(k) * gradient
	979	ELSE
[1174]	980	ug(k) = ug_surface + dzu(k) * gradient
[97]	981	ENDIF
[1]	982	ELSE
[97]	983	ug(k) = ug(k-1)
[1]	984	ENDIF
[97]	985	ENDDO
[1]	986
[97]	987	ELSE
	988
	989	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	990	ug(nzt+1) = ug_surface
[667]	991	DO k = nzt, nzb, -1
[177]	992	IF ( i < 11 ) THEN
	993	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	994	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	995	gradient = ug_vertical_gradient(i) / 100.0
	996	ug_vertical_gradient_level_ind(i) = k + 1
	997	i = i + 1
[97]	998	ENDIF
	999	ENDIF
	1000	IF ( gradient /= 0.0 ) THEN
	1001	IF ( k /= nzt ) THEN
	1002	ug(k) = ug(k+1) - dzu(k+1) * gradient
	1003	ELSE
	1004	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	1005	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	1006	ENDIF
	1007	ELSE
	1008	ug(k) = ug(k+1)
	1009	ENDIF
	1010	ENDDO
	1011
	1012	ENDIF
	1013
[1]	1014	!
[767]	1015	!-- In case of no given gradients for ug, choose a zero gradient
[97]	1016	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1017	ug_vertical_gradient_level(1) = 0.0
	1018	ENDIF
	1019
	1020	!
	1021	!--
	1022	!-- If required, compute initial profile of the geostrophic wind
	1023	!-- (component vg)
	1024	i = 1
	1025	gradient = 0.0
[97]	1026
	1027	IF ( .NOT. ocean ) THEN
	1028
	1029	vg_vertical_gradient_level_ind(1) = 0
	1030	vg(0) = vg_surface
	1031	DO k = 1, nzt+1
[177]	1032	IF ( i < 11 ) THEN
	1033	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1034	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1035	gradient = vg_vertical_gradient(i) / 100.0
	1036	vg_vertical_gradient_level_ind(i) = k - 1
	1037	i = i + 1
[1]	1038	ENDIF
	1039	ENDIF
[97]	1040	IF ( gradient /= 0.0 ) THEN
	1041	IF ( k /= 1 ) THEN
	1042	vg(k) = vg(k-1) + dzu(k) * gradient
	1043	ELSE
[1174]	1044	vg(k) = vg_surface + dzu(k) * gradient
[97]	1045	ENDIF
[1]	1046	ELSE
[97]	1047	vg(k) = vg(k-1)
[1]	1048	ENDIF
[97]	1049	ENDDO
[1]	1050
[97]	1051	ELSE
	1052
[121]	1053	vg_vertical_gradient_level_ind(1) = nzt+1
	1054	vg(nzt+1) = vg_surface
[667]	1055	DO k = nzt, nzb, -1
[177]	1056	IF ( i < 11 ) THEN
	1057	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1058	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1059	gradient = vg_vertical_gradient(i) / 100.0
	1060	vg_vertical_gradient_level_ind(i) = k + 1
	1061	i = i + 1
[97]	1062	ENDIF
	1063	ENDIF
	1064	IF ( gradient /= 0.0 ) THEN
	1065	IF ( k /= nzt ) THEN
	1066	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1067	ELSE
	1068	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1069	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1070	ENDIF
	1071	ELSE
	1072	vg(k) = vg(k+1)
	1073	ENDIF
	1074	ENDDO
	1075
	1076	ENDIF
	1077
[1]	1078	!
[767]	1079	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1080	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1081	vg_vertical_gradient_level(1) = 0.0
	1082	ENDIF
	1083
	1084	!
[767]	1085	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1086	!-- interpolate them from wind profile data (if given)
	1087	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1088
	1089	u_init = ug
	1090	v_init = vg
	1091
	1092	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1093
	1094	IF ( uv_heights(1) /= 0.0 ) THEN
	1095	message_string = 'uv_heights(1) must be 0.0'
	1096	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1097	ENDIF
	1098
	1099	use_prescribed_profile_data = .TRUE.
	1100
	1101	kk = 1
	1102	u_init(0) = 0.0
	1103	v_init(0) = 0.0
	1104
	1105	DO k = 1, nz+1
	1106
	1107	IF ( kk < 100 ) THEN
	1108	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1109	kk = kk + 1
	1110	IF ( kk == 100 ) EXIT
	1111	ENDDO
	1112	ENDIF
	1113
[774]	1114	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1115	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1116	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1117	( u_profile(kk+1) - u_profile(kk) )
	1118	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1119	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1120	( v_profile(kk+1) - v_profile(kk) )
	1121	ELSE
	1122	u_init(k) = u_profile(kk)
	1123	v_init(k) = v_profile(kk)
	1124	ENDIF
	1125
	1126	ENDDO
	1127
	1128	ELSE
	1129
	1130	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1131	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1132
	1133	ENDIF
	1134
	1135	!
[94]	1136	!-- Compute initial temperature profile using the given temperature gradients
[940]	1137	IF ( .NOT. neutral ) THEN
[94]	1138
[940]	1139	i = 1
	1140	gradient = 0.0
[94]	1141
[940]	1142	IF ( .NOT. ocean ) THEN
	1143
	1144	pt_vertical_gradient_level_ind(1) = 0
	1145	DO k = 1, nzt+1
	1146	IF ( i < 11 ) THEN
	1147	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1148	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1149	gradient = pt_vertical_gradient(i) / 100.0
	1150	pt_vertical_gradient_level_ind(i) = k - 1
	1151	i = i + 1
	1152	ENDIF
[1]	1153	ENDIF
[940]	1154	IF ( gradient /= 0.0 ) THEN
	1155	IF ( k /= 1 ) THEN
	1156	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1157	ELSE
[1174]	1158	pt_init(k) = pt_surface + dzu(k) * gradient
[940]	1159	ENDIF
[94]	1160	ELSE
[940]	1161	pt_init(k) = pt_init(k-1)
[94]	1162	ENDIF
[940]	1163	ENDDO
[1]	1164
[940]	1165	ELSE
[94]	1166
[940]	1167	pt_vertical_gradient_level_ind(1) = nzt+1
	1168	DO k = nzt, 0, -1
	1169	IF ( i < 11 ) THEN
	1170	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1171	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1172	gradient = pt_vertical_gradient(i) / 100.0
	1173	pt_vertical_gradient_level_ind(i) = k + 1
	1174	i = i + 1
	1175	ENDIF
[94]	1176	ENDIF
[940]	1177	IF ( gradient /= 0.0 ) THEN
	1178	IF ( k /= nzt ) THEN
	1179	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1180	ELSE
	1181	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1182	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1183	ENDIF
[94]	1184	ELSE
[940]	1185	pt_init(k) = pt_init(k+1)
[94]	1186	ENDIF
[940]	1187	ENDDO
[94]	1188
[940]	1189	ENDIF
	1190
[94]	1191	ENDIF
	1192
[1]	1193	!
	1194	!-- In case of no given temperature gradients, choose gradient of neutral
	1195	!-- stratification
[94]	1196	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1197	pt_vertical_gradient_level(1) = 0.0
	1198	ENDIF
	1199
	1200	!
[94]	1201	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1202	!-- boundary condition
[19]	1203	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1204
	1205	!
	1206	!-- If required, compute initial humidity or scalar profile using the given
	1207	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1208	!-- values of the scalar parameters on humidity parameters
	1209	IF ( passive_scalar ) THEN
	1210	bc_q_b = bc_s_b
	1211	bc_q_t = bc_s_t
	1212	q_surface = s_surface
	1213	q_surface_initial_change = s_surface_initial_change
	1214	q_vertical_gradient = s_vertical_gradient
	1215	q_vertical_gradient_level = s_vertical_gradient_level
	1216	surface_waterflux = surface_scalarflux
[407]	1217	wall_humidityflux = wall_scalarflux
[1]	1218	ENDIF
	1219
[75]	1220	IF ( humidity .OR. passive_scalar ) THEN
[1]	1221
	1222	i = 1
	1223	gradient = 0.0
	1224	q_vertical_gradient_level_ind(1) = 0
	1225	DO k = 1, nzt+1
[177]	1226	IF ( i < 11 ) THEN
	1227	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1228	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1229	gradient = q_vertical_gradient(i) / 100.0
	1230	q_vertical_gradient_level_ind(i) = k - 1
	1231	i = i + 1
[1]	1232	ENDIF
	1233	ENDIF
	1234	IF ( gradient /= 0.0 ) THEN
	1235	IF ( k /= 1 ) THEN
	1236	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1237	ELSE
[1174]	1238	q_init(k) = q_init(k-1) + dzu(k) * gradient
[1]	1239	ENDIF
	1240	ELSE
	1241	q_init(k) = q_init(k-1)
	1242	ENDIF
[72]	1243	!
	1244	!-- Avoid negative humidities
	1245	IF ( q_init(k) < 0.0 ) THEN
	1246	q_init(k) = 0.0
	1247	ENDIF
[1]	1248	ENDDO
	1249
	1250	!
	1251	!-- In case of no given humidity gradients, choose zero gradient
	1252	!-- conditions
	1253	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1254	q_vertical_gradient_level(1) = 0.0
	1255	ENDIF
	1256	!
[1053]	1257	!-- Store humidity, rain water content and rain drop concentration
	1258	!-- gradient at the top boundary for possile Neumann boundary condition
	1259	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1260	ENDIF
	1261
[94]	1262	!
	1263	!-- If required, compute initial salinity profile using the given salinity
	1264	!-- gradients
	1265	IF ( ocean ) THEN
	1266
	1267	i = 1
	1268	gradient = 0.0
	1269
	1270	sa_vertical_gradient_level_ind(1) = nzt+1
	1271	DO k = nzt, 0, -1
[177]	1272	IF ( i < 11 ) THEN
	1273	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1274	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1275	gradient = sa_vertical_gradient(i) / 100.0
	1276	sa_vertical_gradient_level_ind(i) = k + 1
	1277	i = i + 1
[94]	1278	ENDIF
	1279	ENDIF
	1280	IF ( gradient /= 0.0 ) THEN
	1281	IF ( k /= nzt ) THEN
	1282	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1283	ELSE
	1284	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1285	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1286	ENDIF
	1287	ELSE
	1288	sa_init(k) = sa_init(k+1)
	1289	ENDIF
	1290	ENDDO
	1291
	1292	ENDIF
	1293
[138]	1294	!
[388]	1295	!-- If required compute the profile of leaf area density used in the plant
	1296	!-- canopy model
[138]	1297	IF ( plant_canopy ) THEN
	1298
	1299	i = 1
	1300	gradient = 0.0
[1]	1301
[138]	1302	IF ( .NOT. ocean ) THEN
[153]	1303
	1304	lad(0) = lad_surface
[138]	1305
	1306	lad_vertical_gradient_level_ind(1) = 0
	1307	DO k = 1, pch_index
[177]	1308	IF ( i < 11 ) THEN
	1309	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1310	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1311	gradient = lad_vertical_gradient(i)
	1312	lad_vertical_gradient_level_ind(i) = k - 1
	1313	i = i + 1
[138]	1314	ENDIF
	1315	ENDIF
	1316	IF ( gradient /= 0.0 ) THEN
	1317	IF ( k /= 1 ) THEN
	1318	lad(k) = lad(k-1) + dzu(k) * gradient
	1319	ELSE
[1174]	1320	lad(k) = lad_surface + dzu(k) *gradient
[138]	1321	ENDIF
	1322	ELSE
	1323	lad(k) = lad(k-1)
	1324	ENDIF
	1325	ENDDO
	1326
	1327	ENDIF
	1328
[1]	1329	!
[388]	1330	!-- In case of no given leaf area density gradients, choose a vanishing
	1331	!-- gradient
[138]	1332	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1333	lad_vertical_gradient_level(1) = 0.0
	1334	ENDIF
	1335
	1336	ENDIF
	1337
	1338	ENDIF
[411]	1339
	1340	!
	1341	!-- Initialize large scale subsidence if required
[580]	1342	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1343	large_scale_subsidence = .TRUE.
	1344	CALL init_w_subsidence
[1179]	1345	ENDIF
[667]	1346
[138]	1347	!
[1]	1348	!-- Compute Coriolis parameter
	1349	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1350	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1351
	1352	!
[1179]	1353	!-- Check and set buoyancy related parameters and switches
	1354	IF ( reference_state == 'horizontal_average' ) THEN
	1355	CONTINUE
	1356	ELSEIF ( reference_state == 'initial_profile' ) THEN
	1357	use_initial_profile_as_reference = .TRUE.
	1358	ELSEIF ( reference_state == 'single_value' ) THEN
	1359	use_single_reference_value = .TRUE.
	1360	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
	1361	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
	1362	ELSE
	1363	message_string = 'illegal value for reference_state: "' // &
	1364	TRIM( reference_state ) // '"'
	1365	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
	1366	ENDIF
[57]	1367
	1368	!
[1179]	1369	!-- Ocean runs always use reference values in the buoyancy term
	1370	IF ( ocean ) THEN
	1371	reference_state = 'single_value'
	1372	use_single_reference_value = .TRUE.
	1373	ENDIF
[97]	1374
	1375	!
	1376	!-- Sign of buoyancy/stability terms
	1377	IF ( ocean ) atmos_ocean_sign = -1.0
	1378
	1379	!
[108]	1380	!-- Ocean version must use flux boundary conditions at the top
	1381	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1382	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1383	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1384	ENDIF
[97]	1385
	1386	!
[1]	1387	!-- In case of a given slope, compute the relevant quantities
	1388	IF ( alpha_surface /= 0.0 ) THEN
	1389	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1390	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1391	' ) must be < 90.0'
[226]	1392	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1393	ENDIF
	1394	sloping_surface = .TRUE.
	1395	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1396	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1397	ENDIF
	1398
	1399	!
	1400	!-- Check time step and cfl_factor
	1401	IF ( dt /= -1.0 ) THEN
	1402	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1403	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1404	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1405	ENDIF
	1406	dt_3d = dt
	1407	dt_fixed = .TRUE.
	1408	ENDIF
	1409
	1410	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1411	IF ( cfl_factor == -1.0 ) THEN
[1001]	1412	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1413	cfl_factor = 0.8
[1001]	1414	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1415	cfl_factor = 0.9
[1]	1416	ELSE
[1001]	1417	cfl_factor = 0.9
[1]	1418	ENDIF
	1419	ELSE
[215]	1420	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1421	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1422	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1423	ENDIF
	1424	ENDIF
	1425
	1426	!
	1427	!-- Store simulated time at begin
	1428	simulated_time_at_begin = simulated_time
	1429
	1430	!
[291]	1431	!-- Store reference time for coupled runs and change the coupling flag,
	1432	!-- if ...
	1433	IF ( simulated_time == 0.0 ) THEN
	1434	IF ( coupling_start_time == 0.0 ) THEN
	1435	time_since_reference_point = 0.0
	1436	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1437	run_coupled = .FALSE.
	1438	ENDIF
	1439	ENDIF
	1440
	1441	!
[1]	1442	!-- Set wind speed in the Galilei-transformed system
	1443	IF ( galilei_transformation ) THEN
[1053]	1444	IF ( use_ug_for_galilei_tr .AND. &
	1445	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1446	ug_vertical_gradient(1) == 0.0 .AND. &
	1447	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1448	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1449	u_gtrans = ug_surface * 0.6
	1450	v_gtrans = vg_surface * 0.6
[1053]	1451	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1452	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1453	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1454	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1455	' with galilei transformation'
[226]	1456	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1457	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1458	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1459	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1460	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1461	' with galilei transformation'
[226]	1462	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1463	ELSE
[215]	1464	message_string = 'variable translation speed used for galilei-' // &
	1465	'transformation, which may cause & instabilities in stably ' // &
	1466	'stratified regions'
[226]	1467	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1468	ENDIF
	1469	ENDIF
	1470
	1471	!
	1472	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1473	!-- fluxes have to be used in the diffusion-terms
	1474	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1475
	1476	!
	1477	!-- Check boundary conditions and set internal variables:
	1478	!-- Lateral boundary conditions
[73]	1479	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[1159]	1480	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1481	message_string = 'unknown boundary condition: bc_lr = "' // &
	1482	TRIM( bc_lr ) // '"'
[226]	1483	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1484	ENDIF
[73]	1485	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[1159]	1486	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1487	message_string = 'unknown boundary condition: bc_ns = "' // &
	1488	TRIM( bc_ns ) // '"'
[226]	1489	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1490	ENDIF
	1491
	1492	!
[366]	1493	!-- Internal variables used for speed optimization in if clauses
[707]	1494	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1495	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1496	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1497	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1498	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1499	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1500
	1501	!
[1]	1502	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1503	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1504	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1505	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1506	IF ( psolver /= 'multigrid' ) THEN
[215]	1507	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1508	'psolver = "' // TRIM( psolver ) // '"'
[226]	1509	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1510	ENDIF
[667]	1511	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1512	momentum_advec /= 'ws-scheme') THEN
[215]	1513	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1514	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1515	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1516	ENDIF
[667]	1517	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1518	scalar_advec /= 'ws-scheme' ) THEN
[215]	1519	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1520	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1521	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1522	ENDIF
	1523	IF ( galilei_transformation ) THEN
[215]	1524	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1525	'galilei_transformation = .T.'
[226]	1526	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1527	ENDIF
	1528	ENDIF
	1529
	1530	!
	1531	!-- Bottom boundary condition for the turbulent Kinetic energy
	1532	IF ( bc_e_b == 'neumann' ) THEN
	1533	ibc_e_b = 1
	1534	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1535	ibc_e_b = 2
[1015]	1536	IF ( prandtl_layer ) THEN
	1537	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1538	TRIM( bc_e_b ) // '"'
[226]	1539	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1540	ENDIF
	1541	IF ( .NOT. prandtl_layer ) THEN
	1542	bc_e_b = 'neumann'
	1543	ibc_e_b = 1
[215]	1544	message_string = 'boundary condition bc_e_b changed to "' // &
	1545	TRIM( bc_e_b ) // '"'
[226]	1546	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1547	ENDIF
	1548	ELSE
[215]	1549	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1550	TRIM( bc_e_b ) // '"'
[226]	1551	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1552	ENDIF
	1553
	1554	!
	1555	!-- Boundary conditions for perturbation pressure
	1556	IF ( bc_p_b == 'dirichlet' ) THEN
	1557	ibc_p_b = 0
	1558	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1559	ibc_p_b = 1
	1560	ELSE
[215]	1561	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1562	TRIM( bc_p_b ) // '"'
[226]	1563	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1564	ENDIF
[1111]	1565
[1]	1566	IF ( bc_p_t == 'dirichlet' ) THEN
	1567	ibc_p_t = 0
	1568	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1569	ibc_p_t = 1
	1570	ELSE
[215]	1571	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1572	TRIM( bc_p_t ) // '"'
[226]	1573	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1574	ENDIF
	1575
	1576	!
	1577	!-- Boundary conditions for potential temperature
[102]	1578	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1579	ibc_pt_b = 2
[1]	1580	ELSE
[102]	1581	IF ( bc_pt_b == 'dirichlet' ) THEN
	1582	ibc_pt_b = 0
	1583	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1584	ibc_pt_b = 1
	1585	ELSE
[215]	1586	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1587	TRIM( bc_pt_b ) // '"'
[226]	1588	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1589	ENDIF
	1590	ENDIF
[102]	1591
[1]	1592	IF ( bc_pt_t == 'dirichlet' ) THEN
	1593	ibc_pt_t = 0
	1594	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1595	ibc_pt_t = 1
[19]	1596	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1597	ibc_pt_t = 2
[1]	1598	ELSE
[215]	1599	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1600	TRIM( bc_pt_t ) // '"'
[226]	1601	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1602	ENDIF
	1603
[20]	1604	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1605	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1606
	1607	IF ( neutral ) THEN
	1608
	1609	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1610	THEN
	1611	message_string = 'heatflux must not be set for pure neutral flow'
	1612	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1613	ENDIF
	1614
	1615	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1616	THEN
	1617	message_string = 'heatflux must not be set for pure neutral flow'
	1618	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1619	ENDIF
	1620
	1621	ENDIF
	1622
[103]	1623	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1624	top_momentumflux_v /= 9999999.9 ) THEN
	1625	constant_top_momentumflux = .TRUE.
	1626	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1627	top_momentumflux_v == 9999999.9 ) ) THEN
	1628	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1629	'must be set'
[226]	1630	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1631	ENDIF
[1]	1632
	1633	!
	1634	!-- A given surface temperature implies Dirichlet boundary condition for
	1635	!-- temperature. In this case specification of a constant heat flux is
	1636	!-- forbidden.
	1637	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1638	surface_heatflux /= 0.0 ) THEN
[215]	1639	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1640	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1641	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1642	ENDIF
	1643	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1644	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1645	'wed with pt_surface_initial_change (/=0) = ', &
	1646	pt_surface_initial_change
[226]	1647	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1648	ENDIF
	1649
	1650	!
[19]	1651	!-- A given temperature at the top implies Dirichlet boundary condition for
	1652	!-- temperature. In this case specification of a constant heat flux is
	1653	!-- forbidden.
	1654	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1655	top_heatflux /= 0.0 ) THEN
[215]	1656	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1657	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1658	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1659	ENDIF
	1660
	1661	!
[95]	1662	!-- Boundary conditions for salinity
	1663	IF ( ocean ) THEN
	1664	IF ( bc_sa_t == 'dirichlet' ) THEN
	1665	ibc_sa_t = 0
	1666	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1667	ibc_sa_t = 1
	1668	ELSE
[215]	1669	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1670	TRIM( bc_sa_t ) // '"'
[226]	1671	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1672	ENDIF
	1673
	1674	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1675	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1676	message_string = 'boundary condition: bc_sa_t = "' // &
	1677	TRIM( bc_sa_t ) // '" requires to set ' // &
	1678	'top_salinityflux'
[226]	1679	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1680	ENDIF
[95]	1681
	1682	!
	1683	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1684	!-- salinity. In this case specification of a constant salinity flux is
	1685	!-- forbidden.
	1686	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1687	top_salinityflux /= 0.0 ) THEN
[215]	1688	message_string = 'boundary condition: bc_sa_t = "' // &
	1689	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1690	'constant_top_salinityflux = .TRUE.'
[226]	1691	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1692	ENDIF
	1693
	1694	ENDIF
	1695
	1696	!
[75]	1697	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1698	!-- water content / scalar
[75]	1699	IF ( humidity .OR. passive_scalar ) THEN
	1700	IF ( humidity ) THEN
[1]	1701	sq = 'q'
	1702	ELSE
	1703	sq = 's'
	1704	ENDIF
	1705	IF ( bc_q_b == 'dirichlet' ) THEN
	1706	ibc_q_b = 0
	1707	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1708	ibc_q_b = 1
	1709	ELSE
[215]	1710	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1711	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1712	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1713	ENDIF
	1714	IF ( bc_q_t == 'dirichlet' ) THEN
	1715	ibc_q_t = 0
	1716	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1717	ibc_q_t = 1
	1718	ELSE
[215]	1719	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1720	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1721	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1722	ENDIF
	1723
[600]	1724	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1725
	1726	!
	1727	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1728	!-- humidity. In this case specification of a constant water flux is
[1]	1729	!-- forbidden.
	1730	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1731	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1732	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1733	'th prescribed surface flux'
[226]	1734	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1735	ENDIF
	1736	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1737	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1738	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1739	q_surface_initial_change
[226]	1740	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1741	ENDIF
[1053]	1742
[1]	1743	ENDIF
	1744	!
	1745	!-- Boundary conditions for horizontal components of wind speed
	1746	IF ( bc_uv_b == 'dirichlet' ) THEN
	1747	ibc_uv_b = 0
	1748	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1749	ibc_uv_b = 1
	1750	IF ( prandtl_layer ) THEN
[215]	1751	message_string = 'boundary condition: bc_uv_b = "' // &
	1752	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1753	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1754	ENDIF
	1755	ELSE
[215]	1756	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1757	TRIM( bc_uv_b ) // '"'
[226]	1758	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1759	ENDIF
[667]	1760	!
	1761	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1762	!-- assigned with the u and v values of the ocean surface
	1763	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1764	ibc_uv_b = 2
	1765	ENDIF
[215]	1766
[108]	1767	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1768	bc_uv_t = 'neumann'
[1]	1769	ibc_uv_t = 1
	1770	ELSE
[132]	1771	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1772	ibc_uv_t = 0
[767]	1773	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1774	!
	1775	!-- Velocities for the initial u,v-profiles are set zero at the top
	1776	!-- in case of dirichlet_0 conditions
	1777	u_init(nzt+1) = 0.0
	1778	v_init(nzt+1) = 0.0
	1779	ENDIF
[108]	1780	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1781	ibc_uv_t = 1
	1782	ELSE
[215]	1783	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1784	TRIM( bc_uv_t ) // '"'
[226]	1785	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1786	ENDIF
	1787	ENDIF
	1788
	1789	!
	1790	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1791	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1792	rayleigh_damping_factor = 0.0
[1]	1793	ELSE
	1794	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1795	THEN
[215]	1796	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1797	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1798	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1799	ENDIF
	1800	ENDIF
	1801
	1802	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1803	IF ( .NOT. ocean ) THEN
	1804	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1805	ELSE
	1806	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1807	ENDIF
[1]	1808	ELSE
[108]	1809	IF ( .NOT. ocean ) THEN
	1810	IF ( rayleigh_damping_height < 0.0 .OR. &
	1811	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1812	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1813	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1814	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1815	ENDIF
[108]	1816	ELSE
	1817	IF ( rayleigh_damping_height > 0.0 .OR. &
	1818	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1819	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1820	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1821	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1822	ENDIF
[1]	1823	ENDIF
	1824	ENDIF
	1825
	1826	!
	1827	!-- Check number of chosen statistic regions. More than 10 regions are not
	1828	!-- allowed, because so far no more than 10 corresponding output files can
	1829	!-- be opened (cf. check_open)
	1830	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1831	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1832	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1833	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1834	ENDIF
	1835	IF ( normalizing_region > statistic_regions .OR. &
	1836	normalizing_region < 0) THEN
[215]	1837	WRITE ( message_string, * ) 'normalizing_region = ', &
	1838	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1839	' (value of statistic_regions)'
[226]	1840	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1841	ENDIF
	1842
	1843	!
[116]	1844	!-- Check the interval for sorting particles.
	1845	!-- Using particles as cloud droplets requires sorting after each timestep.
	1846	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1847	dt_sort_particles = 0.0
[215]	1848	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1849	'_droplets = .TRUE.'
[226]	1850	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1851	ENDIF
	1852
	1853	!
[1]	1854	!-- Set the default intervals for data output, if necessary
	1855	!-- NOTE: dt_dosp has already been set in package_parin
	1856	IF ( dt_data_output /= 9999999.9 ) THEN
	1857	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1858	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1859	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1860	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1861	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1862	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1863	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1864	DO mid = 1, max_masks
[410]	1865	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1866	ENDDO
[1]	1867	ENDIF
	1868
	1869	!
	1870	!-- Set the default skip time intervals for data output, if necessary
	1871	IF ( skip_time_dopr == 9999999.9 ) &
	1872	skip_time_dopr = skip_time_data_output
	1873	IF ( skip_time_dosp == 9999999.9 ) &
	1874	skip_time_dosp = skip_time_data_output
	1875	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1876	skip_time_do2d_xy = skip_time_data_output
	1877	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1878	skip_time_do2d_xz = skip_time_data_output
	1879	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1880	skip_time_do2d_yz = skip_time_data_output
	1881	IF ( skip_time_do3d == 9999999.9 ) &
	1882	skip_time_do3d = skip_time_data_output
	1883	IF ( skip_time_data_output_av == 9999999.9 ) &
	1884	skip_time_data_output_av = skip_time_data_output
[564]	1885	DO mid = 1, max_masks
[410]	1886	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1887	skip_time_domask(mid) = skip_time_data_output
	1888	ENDDO
[1]	1889
	1890	!
	1891	!-- Check the average intervals (first for 3d-data, then for profiles and
	1892	!-- spectra)
	1893	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1894	WRITE( message_string, * ) 'averaging_interval = ', &
	1895	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1896	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1897	ENDIF
	1898
	1899	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1900	averaging_interval_pr = averaging_interval
	1901	ENDIF
	1902
	1903	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1904	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1905	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1906	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1907	ENDIF
	1908
	1909	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1910	averaging_interval_sp = averaging_interval
	1911	ENDIF
	1912
	1913	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1914	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1915	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1916	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1917	ENDIF
	1918
	1919	!
	1920	!-- Set the default interval for profiles entering the temporal average
	1921	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1922	dt_averaging_input_pr = dt_averaging_input
	1923	ENDIF
	1924
	1925	!
	1926	!-- Set the default interval for the output of timeseries to a reasonable
	1927	!-- value (tries to minimize the number of calls of flow_statistics)
	1928	IF ( dt_dots == 9999999.9 ) THEN
	1929	IF ( averaging_interval_pr == 0.0 ) THEN
	1930	dt_dots = MIN( dt_run_control, dt_dopr )
	1931	ELSE
	1932	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1933	ENDIF
	1934	ENDIF
	1935
	1936	!
	1937	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1938	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1939	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1940	dt_averaging_input, ' must be <= averaging_interval = ', &
	1941	averaging_interval
[226]	1942	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1943	ENDIF
	1944
	1945	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1946	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1947	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1948	averaging_interval_pr
[226]	1949	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1950	ENDIF
	1951
	1952	!
[72]	1953	!-- Set the default value for the integration interval of precipitation amount
	1954	IF ( precipitation ) THEN
	1955	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1956	precipitation_amount_interval = dt_do2d_xy
	1957	ELSE
	1958	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1959	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1960	precipitation_amount_interval, ' must not be larger than ', &
	1961	'dt_do2d_xy = ', dt_do2d_xy
[226]	1962	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1963	ENDIF
	1964	ENDIF
	1965	ENDIF
	1966
	1967	!
[1]	1968	!-- Determine the number of output profiles and check whether they are
	1969	!-- permissible
	1970	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1971
	1972	dopr_n = dopr_n + 1
	1973	i = dopr_n
	1974
	1975	!
	1976	!-- Determine internal profile number (for hom, homs)
	1977	!-- and store height levels
	1978	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1979
	1980	CASE ( 'u', '#u' )
	1981	dopr_index(i) = 1
[87]	1982	dopr_unit(i) = 'm/s'
[1]	1983	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1984	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1985	dopr_initial_index(i) = 5
	1986	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1987	data_output_pr(i) = data_output_pr(i)(2:)
	1988	ENDIF
	1989
	1990	CASE ( 'v', '#v' )
	1991	dopr_index(i) = 2
[87]	1992	dopr_unit(i) = 'm/s'
	1993	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1994	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1995	dopr_initial_index(i) = 6
	1996	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1997	data_output_pr(i) = data_output_pr(i)(2:)
	1998	ENDIF
	1999
	2000	CASE ( 'w' )
	2001	dopr_index(i) = 3
[87]	2002	dopr_unit(i) = 'm/s'
	2003	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2004
	2005	CASE ( 'pt', '#pt' )
	2006	IF ( .NOT. cloud_physics ) THEN
	2007	dopr_index(i) = 4
[87]	2008	dopr_unit(i) = 'K'
[1]	2009	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2010	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2011	dopr_initial_index(i) = 7
	2012	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2013	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	2014	data_output_pr(i) = data_output_pr(i)(2:)
	2015	ENDIF
	2016	ELSE
	2017	dopr_index(i) = 43
[87]	2018	dopr_unit(i) = 'K'
[1]	2019	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	2020	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2021	dopr_initial_index(i) = 28
	2022	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2023	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	2024	data_output_pr(i) = data_output_pr(i)(2:)
	2025	ENDIF
	2026	ENDIF
	2027
	2028	CASE ( 'e' )
	2029	dopr_index(i) = 8
[87]	2030	dopr_unit(i) = 'm2/s2'
[1]	2031	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	2032	hom(nzb,2,8,:) = 0.0
	2033
	2034	CASE ( 'km', '#km' )
	2035	dopr_index(i) = 9
[87]	2036	dopr_unit(i) = 'm2/s'
[1]	2037	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2038	hom(nzb,2,9,:) = 0.0
	2039	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2040	dopr_initial_index(i) = 23
	2041	hom(:,2,23,:) = hom(:,2,9,:)
	2042	data_output_pr(i) = data_output_pr(i)(2:)
	2043	ENDIF
	2044
	2045	CASE ( 'kh', '#kh' )
	2046	dopr_index(i) = 10
[87]	2047	dopr_unit(i) = 'm2/s'
[1]	2048	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2049	hom(nzb,2,10,:) = 0.0
	2050	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2051	dopr_initial_index(i) = 24
	2052	hom(:,2,24,:) = hom(:,2,10,:)
	2053	data_output_pr(i) = data_output_pr(i)(2:)
	2054	ENDIF
	2055
	2056	CASE ( 'l', '#l' )
	2057	dopr_index(i) = 11
[87]	2058	dopr_unit(i) = 'm'
[1]	2059	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2060	hom(nzb,2,11,:) = 0.0
	2061	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2062	dopr_initial_index(i) = 25
	2063	hom(:,2,25,:) = hom(:,2,11,:)
	2064	data_output_pr(i) = data_output_pr(i)(2:)
	2065	ENDIF
	2066
	2067	CASE ( 'w"u"' )
	2068	dopr_index(i) = 12
[87]	2069	dopr_unit(i) = 'm2/s2'
[1]	2070	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2071	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2072
	2073	CASE ( 'wu' )
	2074	dopr_index(i) = 13
[87]	2075	dopr_unit(i) = 'm2/s2'
[1]	2076	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2077
	2078	CASE ( 'w"v"' )
	2079	dopr_index(i) = 14
[87]	2080	dopr_unit(i) = 'm2/s2'
[1]	2081	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2082	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2083
	2084	CASE ( 'wv' )
	2085	dopr_index(i) = 15
[87]	2086	dopr_unit(i) = 'm2/s2'
[1]	2087	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2088
	2089	CASE ( 'w"pt"' )
	2090	dopr_index(i) = 16
[87]	2091	dopr_unit(i) = 'K m/s'
[1]	2092	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2093
	2094	CASE ( 'wpt' )
	2095	dopr_index(i) = 17
[87]	2096	dopr_unit(i) = 'K m/s'
[1]	2097	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2098
	2099	CASE ( 'wpt' )
	2100	dopr_index(i) = 18
[87]	2101	dopr_unit(i) = 'K m/s'
[1]	2102	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2103
	2104	CASE ( 'wu' )
	2105	dopr_index(i) = 19
[87]	2106	dopr_unit(i) = 'm2/s2'
[1]	2107	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2108	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2109
	2110	CASE ( 'wv' )
	2111	dopr_index(i) = 20
[87]	2112	dopr_unit(i) = 'm2/s2'
[1]	2113	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2114	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2115
	2116	CASE ( 'wptBC' )
	2117	dopr_index(i) = 21
[87]	2118	dopr_unit(i) = 'K m/s'
[1]	2119	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2120
	2121	CASE ( 'wptBC' )
	2122	dopr_index(i) = 22
[87]	2123	dopr_unit(i) = 'K m/s'
[1]	2124	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2125
[96]	2126	CASE ( 'sa', '#sa' )
	2127	IF ( .NOT. ocean ) THEN
[215]	2128	message_string = 'data_output_pr = ' // &
	2129	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2130	'lemented for ocean = .FALSE.'
[226]	2131	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2132	ELSE
	2133	dopr_index(i) = 23
	2134	dopr_unit(i) = 'psu'
	2135	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2137	dopr_initial_index(i) = 26
	2138	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2139	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2140	data_output_pr(i) = data_output_pr(i)(2:)
	2141	ENDIF
	2142	ENDIF
	2143
[1]	2144	CASE ( 'u*2' )
	2145	dopr_index(i) = 30
[87]	2146	dopr_unit(i) = 'm2/s2'
[1]	2147	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2148
	2149	CASE ( 'v*2' )
	2150	dopr_index(i) = 31
[87]	2151	dopr_unit(i) = 'm2/s2'
[1]	2152	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2153
	2154	CASE ( 'w*2' )
	2155	dopr_index(i) = 32
[87]	2156	dopr_unit(i) = 'm2/s2'
[1]	2157	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2158
	2159	CASE ( 'pt*2' )
	2160	dopr_index(i) = 33
[87]	2161	dopr_unit(i) = 'K2'
[1]	2162	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2163
	2164	CASE ( 'e*' )
	2165	dopr_index(i) = 34
[87]	2166	dopr_unit(i) = 'm2/s2'
[1]	2167	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2168
	2169	CASE ( 'w2pt' )
	2170	dopr_index(i) = 35
[87]	2171	dopr_unit(i) = 'K m2/s2'
[1]	2172	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2173
	2174	CASE ( 'wpt2' )
	2175	dopr_index(i) = 36
[87]	2176	dopr_unit(i) = 'K2 m/s'
[1]	2177	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2178
	2179	CASE ( 'we' )
	2180	dopr_index(i) = 37
[87]	2181	dopr_unit(i) = 'm3/s3'
[1]	2182	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2183
	2184	CASE ( 'w*3' )
	2185	dopr_index(i) = 38
[87]	2186	dopr_unit(i) = 'm3/s3'
[1]	2187	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2188
	2189	CASE ( 'Sw' )
	2190	dopr_index(i) = 39
[89]	2191	dopr_unit(i) = 'none'
[1]	2192	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2193
[232]	2194	CASE ( 'p' )
	2195	dopr_index(i) = 40
	2196	dopr_unit(i) = 'Pa'
	2197	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2198
[1]	2199	CASE ( 'q', '#q' )
[108]	2200	IF ( .NOT. humidity ) THEN
[215]	2201	message_string = 'data_output_pr = ' // &
	2202	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2203	'lemented for humidity = .FALSE.'
[226]	2204	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2205	ELSE
	2206	dopr_index(i) = 41
[87]	2207	dopr_unit(i) = 'kg/kg'
	2208	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2209	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2210	dopr_initial_index(i) = 26
	2211	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2212	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2213	data_output_pr(i) = data_output_pr(i)(2:)
	2214	ENDIF
	2215	ENDIF
	2216
	2217	CASE ( 's', '#s' )
	2218	IF ( .NOT. passive_scalar ) THEN
[215]	2219	message_string = 'data_output_pr = ' // &
	2220	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2221	'lemented for passive_scalar = .FALSE.'
[226]	2222	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2223	ELSE
	2224	dopr_index(i) = 41
[87]	2225	dopr_unit(i) = 'kg/m3'
	2226	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2227	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2228	dopr_initial_index(i) = 26
	2229	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2230	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2231	data_output_pr(i) = data_output_pr(i)(2:)
	2232	ENDIF
	2233	ENDIF
	2234
	2235	CASE ( 'qv', '#qv' )
	2236	IF ( .NOT. cloud_physics ) THEN
	2237	dopr_index(i) = 41
[87]	2238	dopr_unit(i) = 'kg/kg'
	2239	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2240	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2241	dopr_initial_index(i) = 26
	2242	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2243	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2244	data_output_pr(i) = data_output_pr(i)(2:)
	2245	ENDIF
	2246	ELSE
	2247	dopr_index(i) = 42
[87]	2248	dopr_unit(i) = 'kg/kg'
	2249	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2250	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2251	dopr_initial_index(i) = 27
	2252	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2253	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2254	data_output_pr(i) = data_output_pr(i)(2:)
	2255	ENDIF
	2256	ENDIF
	2257
	2258	CASE ( 'lpt', '#lpt' )
	2259	IF ( .NOT. cloud_physics ) THEN
[215]	2260	message_string = 'data_output_pr = ' // &
	2261	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2262	'lemented for cloud_physics = .FALSE.'
[226]	2263	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2264	ELSE
	2265	dopr_index(i) = 4
[87]	2266	dopr_unit(i) = 'K'
[1]	2267	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2268	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2269	dopr_initial_index(i) = 7
	2270	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2271	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2272	data_output_pr(i) = data_output_pr(i)(2:)
	2273	ENDIF
	2274	ENDIF
	2275
	2276	CASE ( 'vpt', '#vpt' )
	2277	dopr_index(i) = 44
[87]	2278	dopr_unit(i) = 'K'
	2279	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2280	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2281	dopr_initial_index(i) = 29
	2282	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2283	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2284	data_output_pr(i) = data_output_pr(i)(2:)
	2285	ENDIF
	2286
	2287	CASE ( 'w"vpt"' )
	2288	dopr_index(i) = 45
[87]	2289	dopr_unit(i) = 'K m/s'
[1]	2290	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2291
	2292	CASE ( 'wvpt' )
	2293	dopr_index(i) = 46
[87]	2294	dopr_unit(i) = 'K m/s'
[1]	2295	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2296
	2297	CASE ( 'wvpt' )
	2298	dopr_index(i) = 47
[87]	2299	dopr_unit(i) = 'K m/s'
[1]	2300	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2301
	2302	CASE ( 'w"q"' )
[108]	2303	IF ( .NOT. humidity ) THEN
[215]	2304	message_string = 'data_output_pr = ' // &
	2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2306	'lemented for humidity = .FALSE.'
[226]	2307	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2308	ELSE
	2309	dopr_index(i) = 48
[87]	2310	dopr_unit(i) = 'kg/kg m/s'
[1]	2311	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2312	ENDIF
	2313
	2314	CASE ( 'wq' )
[108]	2315	IF ( .NOT. humidity ) THEN
[215]	2316	message_string = 'data_output_pr = ' // &
	2317	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2318	'lemented for humidity = .FALSE.'
[226]	2319	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2320	ELSE
	2321	dopr_index(i) = 49
[87]	2322	dopr_unit(i) = 'kg/kg m/s'
[1]	2323	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2324	ENDIF
	2325
	2326	CASE ( 'wq' )
[108]	2327	IF ( .NOT. humidity ) THEN
[215]	2328	message_string = 'data_output_pr = ' // &
	2329	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2330	'lemented for humidity = .FALSE.'
[226]	2331	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2332	ELSE
	2333	dopr_index(i) = 50
[87]	2334	dopr_unit(i) = 'kg/kg m/s'
[1]	2335	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2336	ENDIF
	2337
	2338	CASE ( 'w"s"' )
	2339	IF ( .NOT. passive_scalar ) THEN
[215]	2340	message_string = 'data_output_pr = ' // &
	2341	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2342	'lemented for passive_scalar = .FALSE.'
[226]	2343	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2344	ELSE
	2345	dopr_index(i) = 48
[87]	2346	dopr_unit(i) = 'kg/m3 m/s'
[1]	2347	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2348	ENDIF
	2349
	2350	CASE ( 'ws' )
	2351	IF ( .NOT. passive_scalar ) THEN
[215]	2352	message_string = 'data_output_pr = ' // &
	2353	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2354	'lemented for passive_scalar = .FALSE.'
[226]	2355	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2356	ELSE
	2357	dopr_index(i) = 49
[87]	2358	dopr_unit(i) = 'kg/m3 m/s'
[1]	2359	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2360	ENDIF
	2361
	2362	CASE ( 'ws' )
	2363	IF ( .NOT. passive_scalar ) THEN
[215]	2364	message_string = 'data_output_pr = ' // &
	2365	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2366	'lemented for passive_scalar = .FALSE.'
[226]	2367	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2368	ELSE
	2369	dopr_index(i) = 50
[87]	2370	dopr_unit(i) = 'kg/m3 m/s'
[1]	2371	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2372	ENDIF
	2373
	2374	CASE ( 'w"qv"' )
[75]	2375	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2376	THEN
	2377	dopr_index(i) = 48
[87]	2378	dopr_unit(i) = 'kg/kg m/s'
[1]	2379	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2380	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2381	dopr_index(i) = 51
[87]	2382	dopr_unit(i) = 'kg/kg m/s'
[1]	2383	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2384	ELSE
[215]	2385	message_string = 'data_output_pr = ' // &
	2386	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2387	'lemented for cloud_physics = .FALSE. an&' // &
	2388	'd humidity = .FALSE.'
[226]	2389	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2390	ENDIF
	2391
	2392	CASE ( 'wqv' )
[75]	2393	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2394	THEN
	2395	dopr_index(i) = 49
[87]	2396	dopr_unit(i) = 'kg/kg m/s'
[1]	2397	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2398	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2399	dopr_index(i) = 52
[87]	2400	dopr_unit(i) = 'kg/kg m/s'
[1]	2401	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2402	ELSE
[215]	2403	message_string = 'data_output_pr = ' // &
	2404	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2405	'lemented for cloud_physics = .FALSE. an&' // &
	2406	'd humidity = .FALSE.'
[226]	2407	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2408	ENDIF
	2409
	2410	CASE ( 'wqv' )
[75]	2411	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2412	THEN
	2413	dopr_index(i) = 50
[87]	2414	dopr_unit(i) = 'kg/kg m/s'
[1]	2415	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2416	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2417	dopr_index(i) = 53
[87]	2418	dopr_unit(i) = 'kg/kg m/s'
[1]	2419	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2420	ELSE
[215]	2421	message_string = 'data_output_pr = ' // &
	2422	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2423	'lemented for cloud_physics = .FALSE. an&' // &
	2424	'd humidity = .FALSE.'
[226]	2425	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2426	ENDIF
	2427
	2428	CASE ( 'ql' )
	2429	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2430	message_string = 'data_output_pr = ' // &
	2431	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2432	'lemented for cloud_physics = .FALSE. or' // &
	2433	'&cloud_droplets = .FALSE.'
[226]	2434	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2435	ELSE
	2436	dopr_index(i) = 54
[87]	2437	dopr_unit(i) = 'kg/kg'
[1]	2438	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2439	ENDIF
	2440
[524]	2441	CASE ( 'wuu*:dz' )
[1]	2442	dopr_index(i) = 55
[87]	2443	dopr_unit(i) = 'm2/s3'
[1]	2444	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2445
[524]	2446	CASE ( 'wp:dz' )
[1]	2447	dopr_index(i) = 56
[87]	2448	dopr_unit(i) = 'm2/s3'
[106]	2449	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2450
[524]	2451	CASE ( 'w"e:dz' )
[1]	2452	dopr_index(i) = 57
[87]	2453	dopr_unit(i) = 'm2/s3'
[1]	2454	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2455
[667]	2456
[1]	2457	CASE ( 'u"pt"' )
	2458	dopr_index(i) = 58
[87]	2459	dopr_unit(i) = 'K m/s'
[1]	2460	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2461
	2462	CASE ( 'upt' )
	2463	dopr_index(i) = 59
[87]	2464	dopr_unit(i) = 'K m/s'
[1]	2465	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2466
	2467	CASE ( 'upt_t' )
	2468	dopr_index(i) = 60
[87]	2469	dopr_unit(i) = 'K m/s'
[1]	2470	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2471
	2472	CASE ( 'v"pt"' )
	2473	dopr_index(i) = 61
[87]	2474	dopr_unit(i) = 'K m/s'
[1]	2475	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2476
	2477	CASE ( 'vpt' )
	2478	dopr_index(i) = 62
[87]	2479	dopr_unit(i) = 'K m/s'
[1]	2480	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2481
	2482	CASE ( 'vpt_t' )
	2483	dopr_index(i) = 63
[87]	2484	dopr_unit(i) = 'K m/s'
[1]	2485	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2486
[96]	2487	CASE ( 'rho' )
[388]	2488	IF ( .NOT. ocean ) THEN
	2489	message_string = 'data_output_pr = ' // &
	2490	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2491	'lemented for ocean = .FALSE.'
	2492	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2493	ELSE
	2494	dopr_index(i) = 64
	2495	dopr_unit(i) = 'kg/m3'
	2496	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1179]	2497	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2498	dopr_initial_index(i) = 77
	2499	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
	2500	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
	2501	data_output_pr(i) = data_output_pr(i)(2:)
	2502	ENDIF
[388]	2503	ENDIF
[1]	2504
[96]	2505	CASE ( 'w"sa"' )
	2506	IF ( .NOT. ocean ) THEN
[215]	2507	message_string = 'data_output_pr = ' // &
	2508	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2509	'lemented for ocean = .FALSE.'
[226]	2510	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2511	ELSE
	2512	dopr_index(i) = 65
	2513	dopr_unit(i) = 'psu m/s'
	2514	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2515	ENDIF
	2516
	2517	CASE ( 'wsa' )
	2518	IF ( .NOT. ocean ) THEN
[215]	2519	message_string = 'data_output_pr = ' // &
	2520	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2521	'lemented for ocean = .FALSE.'
[226]	2522	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2523	ELSE
	2524	dopr_index(i) = 66
	2525	dopr_unit(i) = 'psu m/s'
	2526	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2527	ENDIF
	2528
	2529	CASE ( 'wsa' )
	2530	IF ( .NOT. ocean ) THEN
[215]	2531	message_string = 'data_output_pr = ' // &
	2532	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2533	'lemented for ocean = .FALSE.'
[226]	2534	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2535	ELSE
	2536	dopr_index(i) = 67
	2537	dopr_unit(i) = 'psu m/s'
	2538	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2539	ENDIF
	2540
[106]	2541	CASE ( 'wp' )
	2542	dopr_index(i) = 68
	2543	dopr_unit(i) = 'm3/s3'
	2544	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2545
[106]	2546	CASE ( 'w"e' )
	2547	dopr_index(i) = 69
	2548	dopr_unit(i) = 'm3/s3'
	2549	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2550
[197]	2551	CASE ( 'q*2' )
	2552	IF ( .NOT. humidity ) THEN
[215]	2553	message_string = 'data_output_pr = ' // &
	2554	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2555	'lemented for humidity = .FALSE.'
[226]	2556	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2557	ELSE
	2558	dopr_index(i) = 70
	2559	dopr_unit(i) = 'kg2/kg2'
	2560	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2561	ENDIF
[106]	2562
[388]	2563	CASE ( 'prho' )
	2564	IF ( .NOT. ocean ) THEN
	2565	message_string = 'data_output_pr = ' // &
	2566	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2567	'lemented for ocean = .FALSE.'
	2568	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2569	ELSE
	2570	dopr_index(i) = 71
	2571	dopr_unit(i) = 'kg/m3'
	2572	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2573	ENDIF
	2574
	2575	CASE ( 'hyp' )
	2576	dopr_index(i) = 72
[531]	2577	dopr_unit(i) = 'dbar'
[388]	2578	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2579
[1053]	2580	CASE ( 'nr' )
	2581	IF ( .NOT. cloud_physics ) THEN
	2582	message_string = 'data_output_pr = ' // &
	2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2584	'lemented for cloud_physics = .FALSE.'
	2585	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2586	ELSEIF ( icloud_scheme /= 0 ) THEN
	2587	message_string = 'data_output_pr = ' // &
	2588	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2589	'lemented for cloud_scheme /= seifert_beheng'
	2590	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2591	ELSEIF ( .NOT. precipitation ) THEN
	2592	message_string = 'data_output_pr = ' // &
	2593	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2594	'lemented for precipitation = .FALSE.'
	2595	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2596	ELSE
	2597	dopr_index(i) = 73
	2598	dopr_unit(i) = '1/m3'
	2599	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2600	ENDIF
	2601
	2602	CASE ( 'qr' )
	2603	IF ( .NOT. cloud_physics ) THEN
	2604	message_string = 'data_output_pr = ' // &
	2605	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2606	'lemented for cloud_physics = .FALSE.'
	2607	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2608	ELSEIF ( icloud_scheme /= 0 ) THEN
	2609	message_string = 'data_output_pr = ' // &
	2610	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2611	'lemented for cloud_scheme /= seifert_beheng'
	2612	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2613	ELSEIF ( .NOT. precipitation ) THEN
	2614	message_string = 'data_output_pr = ' // &
	2615	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2616	'lemented for precipitation = .FALSE.'
	2617	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2618	ELSE
	2619	dopr_index(i) = 74
	2620	dopr_unit(i) = 'kg/kg'
	2621	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2622	ENDIF
	2623
	2624	CASE ( 'qc' )
	2625	IF ( .NOT. cloud_physics ) THEN
	2626	message_string = 'data_output_pr = ' // &
	2627	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2628	'lemented for cloud_physics = .FALSE.'
	2629	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2630	ELSEIF ( icloud_scheme /= 0 ) THEN
	2631	message_string = 'data_output_pr = ' // &
	2632	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2633	'lemented for cloud_scheme /= seifert_beheng'
	2634	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2635	ELSE
	2636	dopr_index(i) = 75
	2637	dopr_unit(i) = 'kg/kg'
	2638	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2639	ENDIF
	2640
	2641	CASE ( 'prr' )
	2642	IF ( .NOT. cloud_physics ) THEN
	2643	message_string = 'data_output_pr = ' // &
	2644	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2645	'lemented for cloud_physics = .FALSE.'
	2646	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2647	ELSEIF ( icloud_scheme /= 0 ) THEN
	2648	message_string = 'data_output_pr = ' // &
	2649	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2650	'lemented for cloud_scheme /= seifert_beheng'
	2651	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2652	ELSEIF ( .NOT. precipitation ) THEN
	2653	message_string = 'data_output_pr = ' // &
	2654	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2655	'lemented for precipitation = .FALSE.'
	2656	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2657
	2658	ELSE
	2659	dopr_index(i) = 76
	2660	dopr_unit(i) = 'kg/kg m/s'
	2661	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2662	ENDIF
	2663
[1]	2664	CASE DEFAULT
[87]	2665
	2666	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2667
	2668	IF ( unit == 'illegal' ) THEN
[215]	2669	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2670	message_string = 'illegal value for data_output_pr or ' // &
	2671	'data_output_pr_user = "' // &
	2672	TRIM( data_output_pr(i) ) // '"'
[226]	2673	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2674	ELSE
	2675	message_string = 'illegal value for data_output_pr = "' // &
	2676	TRIM( data_output_pr(i) ) // '"'
[226]	2677	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2678	ENDIF
[1]	2679	ENDIF
	2680
	2681	END SELECT
[667]	2682
[1]	2683	ENDDO
	2684
	2685
	2686	!
	2687	!-- Append user-defined data output variables to the standard data output
	2688	IF ( data_output_user(1) /= ' ' ) THEN
	2689	i = 1
	2690	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2691	i = i + 1
	2692	ENDDO
	2693	j = 1
	2694	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2695	IF ( i > 100 ) THEN
[215]	2696	message_string = 'number of output quantitities given by data' // &
	2697	'_output and data_output_user exceeds the limit of 100'
[226]	2698	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2699	ENDIF
	2700	data_output(i) = data_output_user(j)
	2701	i = i + 1
	2702	j = j + 1
	2703	ENDDO
	2704	ENDIF
	2705
	2706	!
	2707	!-- Check and set steering parameters for 2d/3d data output and averaging
	2708	i = 1
	2709	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2710	!
	2711	!-- Check for data averaging
	2712	ilen = LEN_TRIM( data_output(i) )
	2713	j = 0 ! no data averaging
	2714	IF ( ilen > 3 ) THEN
	2715	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2716	j = 1 ! data averaging
	2717	data_output(i) = data_output(i)(1:ilen-3)
	2718	ENDIF
	2719	ENDIF
	2720	!
	2721	!-- Check for cross section or volume data
	2722	ilen = LEN_TRIM( data_output(i) )
	2723	k = 0 ! 3d data
	2724	var = data_output(i)(1:ilen)
	2725	IF ( ilen > 3 ) THEN
	2726	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2727	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2728	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2729	k = 1 ! 2d data
	2730	var = data_output(i)(1:ilen-3)
	2731	ENDIF
	2732	ENDIF
	2733	!
	2734	!-- Check for allowed value and set units
	2735	SELECT CASE ( TRIM( var ) )
	2736
	2737	CASE ( 'e' )
	2738	IF ( constant_diffusion ) THEN
[215]	2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2740	'res constant_diffusion = .FALSE.'
[226]	2741	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2742	ENDIF
	2743	unit = 'm2/s2'
	2744
[771]	2745	CASE ( 'lpt' )
	2746	IF ( .NOT. cloud_physics ) THEN
	2747	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2748	'res cloud_physics = .TRUE.'
	2749	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2750	ENDIF
	2751	unit = 'K'
	2752
[1053]	2753	CASE ( 'nr' )
	2754	IF ( .NOT. cloud_physics ) THEN
	2755	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2756	'res cloud_physics = .TRUE.'
	2757	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2758	ELSEIF ( icloud_scheme /= 0 ) THEN
	2759	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2760	'res cloud_scheme = seifert_beheng'
	2761	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2762	ENDIF
	2763	unit = '1/m3'
	2764
[1]	2765	CASE ( 'pc', 'pr' )
	2766	IF ( .NOT. particle_advection ) THEN
[215]	2767	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2768	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2769	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2770	ENDIF
	2771	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2772	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2773
[1053]	2774	CASE ( 'prr' )
	2775	IF ( .NOT. cloud_physics ) THEN
	2776	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2777	'res cloud_physics = .TRUE.'
	2778	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2779	ELSEIF ( icloud_scheme /= 0 ) THEN
	2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2781	'res cloud_scheme = seifert_beheng'
	2782	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2783	ELSEIF ( .NOT. precipitation ) THEN
	2784	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2785	'res precipitation = .TRUE.'
	2786	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2787	ENDIF
	2788	unit = 'kg/kg m/s'
	2789
[1]	2790	CASE ( 'q', 'vpt' )
[75]	2791	IF ( .NOT. humidity ) THEN
[215]	2792	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2793	'res humidity = .TRUE.'
[226]	2794	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2795	ENDIF
	2796	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2797	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2798
[1053]	2799	CASE ( 'qc' )
	2800	IF ( .NOT. cloud_physics ) THEN
	2801	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2802	'res cloud_physics = .TRUE.'
	2803	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2804	ELSEIF ( icloud_scheme /= 0 ) THEN
	2805	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2806	'res cloud_scheme = seifert_beheng'
	2807	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2808	ENDIF
	2809	unit = 'kg/kg'
	2810
[1]	2811	CASE ( 'ql' )
	2812	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2813	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2814	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2815	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2816	ENDIF
	2817	unit = 'kg/kg'
	2818
	2819	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2820	IF ( .NOT. cloud_droplets ) THEN
[215]	2821	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2822	'res cloud_droplets = .TRUE.'
[226]	2823	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2824	ENDIF
	2825	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2826	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2827	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2828
[1053]	2829	CASE ( 'qr' )
	2830	IF ( .NOT. cloud_physics ) THEN
	2831	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2832	'res cloud_physics = .TRUE.'
	2833	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2834	ELSEIF ( icloud_scheme /= 0 ) THEN
	2835	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2836	'res cloud_scheme = seifert_beheng'
	2837	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
[1115]	2838	ELSEIF ( .NOT. precipitation ) THEN
	2839	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2840	'res precipitation = .TRUE.'
	2841	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[1053]	2842	ENDIF
	2843	unit = 'kg/kg'
	2844
[1]	2845	CASE ( 'qv' )
	2846	IF ( .NOT. cloud_physics ) THEN
[215]	2847	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2848	'res cloud_physics = .TRUE.'
[226]	2849	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2850	ENDIF
	2851	unit = 'kg/kg'
	2852
[96]	2853	CASE ( 'rho' )
	2854	IF ( .NOT. ocean ) THEN
[215]	2855	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2856	'res ocean = .TRUE.'
[226]	2857	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2858	ENDIF
	2859	unit = 'kg/m3'
	2860
[1]	2861	CASE ( 's' )
	2862	IF ( .NOT. passive_scalar ) THEN
[215]	2863	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2864	'res passive_scalar = .TRUE.'
[226]	2865	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2866	ENDIF
	2867	unit = 'conc'
	2868
[96]	2869	CASE ( 'sa' )
	2870	IF ( .NOT. ocean ) THEN
[215]	2871	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2872	'res ocean = .TRUE.'
[226]	2873	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2874	ENDIF
	2875	unit = 'psu'
	2876
[978]	2877	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2878	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2879	message_string = 'illegal value for data_output: "' // &
	2880	TRIM( var ) // '" & only 2d-horizontal ' // &
	2881	'cross sections are allowed for this value'
[226]	2882	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2883	ENDIF
	2884	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2885	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2886	'res cloud_physics = .TRUE.'
[226]	2887	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2888	ENDIF
[72]	2889	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2890	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2891	'res precipitation = .TRUE.'
[226]	2892	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2893	ENDIF
	2894	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2895	message_string = 'temporal averaging of precipitation ' // &
	2896	'amount "' // TRIM( var ) // '" is not possible'
[226]	2897	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2898	ENDIF
	2899	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2900	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2901	'res precipitation = .TRUE.'
[226]	2902	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2903	ENDIF
[354]	2904	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2905	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2906	'res humidity = .TRUE.'
	2907	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2908	ENDIF
[72]	2909
[354]	2910	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2911	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2912	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2913	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2914	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2915	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2916	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2917	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2918	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2919
[1]	2920
	2921	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2922	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2923	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2924	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2925	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2926	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2927	CONTINUE
	2928
	2929	CASE DEFAULT
	2930	CALL user_check_data_output( var, unit )
	2931
	2932	IF ( unit == 'illegal' ) THEN
[215]	2933	IF ( data_output_user(1) /= ' ' ) THEN
	2934	message_string = 'illegal value for data_output or ' // &
	2935	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2936	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2937	ELSE
	2938	message_string = 'illegal value for data_output =' // &
	2939	TRIM( data_output(i) ) // '"'
[226]	2940	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2941	ENDIF
	2942	ENDIF
	2943
	2944	END SELECT
	2945	!
	2946	!-- Set the internal steering parameters appropriately
	2947	IF ( k == 0 ) THEN
	2948	do3d_no(j) = do3d_no(j) + 1
	2949	do3d(j,do3d_no(j)) = data_output(i)
	2950	do3d_unit(j,do3d_no(j)) = unit
	2951	ELSE
	2952	do2d_no(j) = do2d_no(j) + 1
	2953	do2d(j,do2d_no(j)) = data_output(i)
	2954	do2d_unit(j,do2d_no(j)) = unit
	2955	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2956	data_output_xy(j) = .TRUE.
	2957	ENDIF
	2958	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2959	data_output_xz(j) = .TRUE.
	2960	ENDIF
	2961	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2962	data_output_yz(j) = .TRUE.
	2963	ENDIF
	2964	ENDIF
	2965
	2966	IF ( j == 1 ) THEN
	2967	!
	2968	!-- Check, if variable is already subject to averaging
	2969	found = .FALSE.
	2970	DO k = 1, doav_n
	2971	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2972	ENDDO
	2973
	2974	IF ( .NOT. found ) THEN
	2975	doav_n = doav_n + 1
	2976	doav(doav_n) = var
	2977	ENDIF
	2978	ENDIF
	2979
	2980	i = i + 1
	2981	ENDDO
	2982
	2983	!
[376]	2984	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2985	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2986	WRITE( message_string, * ) 'output of averaged quantity "', &
	2987	TRIM( doav(1) ), '_av" requires to set a ', &
	2988	'non-zero & averaging interval'
	2989	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2990	ENDIF
	2991
	2992	!
[308]	2993	!-- Check sectional planes and store them in one shared array
	2994	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2995	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2996	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2997	ENDIF
	2998	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2999	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	3000	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	3001	ENDIF
	3002	IF ( ANY( section_yz > nx + 1 ) ) THEN
	3003	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	3004	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	3005	ENDIF
[1]	3006	section(:,1) = section_xy
	3007	section(:,2) = section_xz
	3008	section(:,3) = section_yz
	3009
	3010	!
	3011	!-- Upper plot limit for 2D vertical sections
	3012	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	3013	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	3014	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	3015	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	3016	' (zu(nzt))'
[226]	3017	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	3018	ENDIF
	3019
	3020	!
	3021	!-- Upper plot limit for 3D arrays
	3022	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	3023
	3024	!
	3025	!-- Determine and check accuracy for compressed 3D plot output
	3026	IF ( do3d_compress ) THEN
	3027	!
	3028	!-- Compression only permissible on T3E machines
	3029	IF ( host(1:3) /= 't3e' ) THEN
[215]	3030	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	3031	TRIM( host ) // '"'
[226]	3032	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	3033	ENDIF
	3034
	3035	i = 1
	3036	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	3037
	3038	ilen = LEN_TRIM( do3d_comp_prec(i) )
	3039	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	3040	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3041	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3042	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3043	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3044	ENDIF
	3045
	3046	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3047	var = do3d_comp_prec(i)(1:ilen-1)
	3048
	3049	SELECT CASE ( var )
	3050
	3051	CASE ( 'u' )
	3052	j = 1
	3053	CASE ( 'v' )
	3054	j = 2
	3055	CASE ( 'w' )
	3056	j = 3
	3057	CASE ( 'p' )
	3058	j = 4
	3059	CASE ( 'pt' )
	3060	j = 5
	3061
	3062	CASE DEFAULT
[215]	3063	WRITE( message_string, * ) 'unknown variable "', &
	3064	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3065	i, ')'
[226]	3066	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3067
	3068	END SELECT
	3069
	3070	plot_3d_precision(j)%precision = prec
	3071	i = i + 1
	3072
	3073	ENDDO
	3074	ENDIF
	3075
	3076	!
	3077	!-- Check the data output format(s)
	3078	IF ( data_output_format(1) == ' ' ) THEN
	3079	!
	3080	!-- Default value
	3081	netcdf_output = .TRUE.
	3082	ELSE
	3083	i = 1
	3084	DO WHILE ( data_output_format(i) /= ' ' )
	3085
	3086	SELECT CASE ( data_output_format(i) )
	3087
	3088	CASE ( 'netcdf' )
	3089	netcdf_output = .TRUE.
	3090	CASE ( 'iso2d' )
	3091	iso2d_output = .TRUE.
	3092	CASE ( 'avs' )
	3093	avs_output = .TRUE.
	3094
	3095	CASE DEFAULT
[215]	3096	message_string = 'unknown value for data_output_format "' // &
	3097	TRIM( data_output_format(i) ) // '"'
[226]	3098	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3099
	3100	END SELECT
	3101
	3102	i = i + 1
	3103	IF ( i > 10 ) EXIT
	3104
	3105	ENDDO
[1031]	3106	ENDIF
[1]	3107
[1031]	3108	!
	3109	!-- Set output format string (used in header)
	3110	IF ( netcdf_output ) THEN
	3111
	3112	SELECT CASE ( netcdf_data_format )
	3113	CASE ( 1 )
	3114	output_format_netcdf = 'netCDF classic'
	3115	CASE ( 2 )
	3116	output_format_netcdf = 'netCDF 64bit offset'
	3117	CASE ( 3 )
	3118	output_format_netcdf = 'netCDF4/HDF5'
	3119	CASE ( 4 )
	3120	output_format_netcdf = 'netCDF4/HDF5 classic'
	3121	CASE ( 5 )
	3122	output_format_netcdf = 'parallel netCDF4/HDF5'
	3123	CASE ( 6 )
	3124	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3125
	3126	END SELECT
	3127
[1]	3128	ENDIF
	3129
	3130	!
[410]	3131	!-- Check mask conditions
[553]	3132	DO mid = 1, max_masks
[567]	3133	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3134	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3135	masks = masks + 1
	3136	ENDIF
	3137	ENDDO
	3138
[410]	3139	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3140	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3141	'<= ', max_masks, ' (=max_masks)'
[564]	3142	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3143	ENDIF
	3144	IF ( masks > 0 ) THEN
	3145	mask_scale(1) = mask_scale_x
	3146	mask_scale(2) = mask_scale_y
	3147	mask_scale(3) = mask_scale_z
	3148	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3149	WRITE( message_string, * ) &
	3150	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3151	'must be > 0.0'
[564]	3152	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3153	ENDIF
	3154	!
	3155	!-- Generate masks for masked data output
	3156	CALL init_masks
	3157	ENDIF
	3158
	3159	!
[493]	3160	!-- Check the NetCDF data format
[924]	3161	#if ! defined ( __check )
[1034]	3162	IF ( netcdf_data_format > 2 ) THEN
[924]	3163	#if defined( __netcdf4 )
[493]	3164	CONTINUE
	3165	#else
[1031]	3166	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3167	'cpp-directive __netcdf4 given & switch ' // &
	3168	'back to 64-bit offset format'
	3169	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3170	netcdf_data_format = 2
	3171	#endif
	3172	ENDIF
[1031]	3173	IF ( netcdf_data_format > 4 ) THEN
	3174	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3175	CONTINUE
	3176	#else
	3177	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3178	'cpp-directive __netcdf4_parallel given & switch ' // &
	3179	'back to netCDF4 non-parallel output'
	3180	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3181	netcdf_data_format = netcdf_data_format - 2
[892]	3182	#endif
[1031]	3183	ENDIF
	3184	#endif
[667]	3185
[809]	3186	#if ! defined( __check )
[1031]	3187	!
[1]	3188	!-- Check netcdf precison
	3189	ldum = .FALSE.
	3190	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3191	#endif
[1]	3192	!
	3193	!-- Check, whether a constant diffusion coefficient shall be used
	3194	IF ( km_constant /= -1.0 ) THEN
	3195	IF ( km_constant < 0.0 ) THEN
[215]	3196	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3197	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3198	ELSE
	3199	IF ( prandtl_number < 0.0 ) THEN
[215]	3200	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3201	' < 0.0'
[226]	3202	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3203	ENDIF
	3204	constant_diffusion = .TRUE.
	3205
	3206	IF ( prandtl_layer ) THEN
[215]	3207	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3208	'value of km'
[226]	3209	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3210	ENDIF
	3211	ENDIF
	3212	ENDIF
	3213
	3214	!
[978]	3215	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3216	!-- potential temperature, check the width of the damping layer
[1]	3217	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3218	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3219	message_string = 'pt_damping_width out of range'
[226]	3220	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3221	ENDIF
	3222	ENDIF
	3223
	3224	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3225	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3226	message_string = 'pt_damping_width out of range'
[226]	3227	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3228	ENDIF
	3229	ENDIF
	3230
	3231	!
	3232	!-- Check value range for rif
	3233	IF ( rif_min >= rif_max ) THEN
[215]	3234	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3235	'than rif_max = ', rif_max
[226]	3236	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3237	ENDIF
	3238
	3239	!
	3240	!-- Determine upper and lower hight level indices for random perturbations
[97]	3241	IF ( disturbance_level_b == -9999999.9 ) THEN
	3242	IF ( ocean ) THEN
	3243	disturbance_level_b = zu((nzt*2)/3)
	3244	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3245	ELSE
	3246	disturbance_level_b = zu(nzb+3)
	3247	disturbance_level_ind_b = nzb + 3
	3248	ENDIF
[1]	3249	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3250	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3251	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3252	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3253	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3254	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3255	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3256	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3257	ELSE
	3258	DO k = 3, nzt-2
	3259	IF ( disturbance_level_b <= zu(k) ) THEN
	3260	disturbance_level_ind_b = k
	3261	EXIT
	3262	ENDIF
	3263	ENDDO
	3264	ENDIF
	3265
[97]	3266	IF ( disturbance_level_t == -9999999.9 ) THEN
	3267	IF ( ocean ) THEN
	3268	disturbance_level_t = zu(nzt-3)
	3269	disturbance_level_ind_t = nzt - 3
	3270	ELSE
	3271	disturbance_level_t = zu(nzt/3)
	3272	disturbance_level_ind_t = nzt / 3
	3273	ENDIF
[1]	3274	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3275	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3276	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3277	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3278	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3279	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3280	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3281	disturbance_level_b
[226]	3282	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3283	ELSE
	3284	DO k = 3, nzt-2
	3285	IF ( disturbance_level_t <= zu(k) ) THEN
	3286	disturbance_level_ind_t = k
	3287	EXIT
	3288	ENDIF
	3289	ENDDO
	3290	ENDIF
	3291
	3292	!
	3293	!-- Check again whether the levels determined this way are ok.
	3294	!-- Error may occur at automatic determination and too few grid points in
	3295	!-- z-direction.
	3296	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3297	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3298	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3299	disturbance_level_b
[226]	3300	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3301	ENDIF
	3302
	3303	!
	3304	!-- Determine the horizontal index range for random perturbations.
	3305	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3306	!-- near the inflow and the perturbation area is further limited to ...(1)
	3307	!-- after the initial phase of the flow.
	3308	dist_nxl = 0; dist_nxr = nx
	3309	dist_nys = 0; dist_nyn = ny
	3310	IF ( bc_lr /= 'cyclic' ) THEN
	3311	IF ( inflow_disturbance_begin == -1 ) THEN
	3312	inflow_disturbance_begin = MIN( 10, nx/2 )
	3313	ENDIF
	3314	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3315	THEN
[215]	3316	message_string = 'inflow_disturbance_begin out of range'
[226]	3317	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3318	ENDIF
	3319	IF ( inflow_disturbance_end == -1 ) THEN
	3320	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3321	ENDIF
	3322	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3323	THEN
[215]	3324	message_string = 'inflow_disturbance_end out of range'
[226]	3325	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3326	ENDIF
	3327	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3328	IF ( inflow_disturbance_begin == -1 ) THEN
	3329	inflow_disturbance_begin = MIN( 10, ny/2 )
	3330	ENDIF
	3331	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3332	THEN
[215]	3333	message_string = 'inflow_disturbance_begin out of range'
[226]	3334	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3335	ENDIF
	3336	IF ( inflow_disturbance_end == -1 ) THEN
	3337	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3338	ENDIF
	3339	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3340	THEN
[215]	3341	message_string = 'inflow_disturbance_end out of range'
[226]	3342	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3343	ENDIF
	3344	ENDIF
	3345
[1159]	3346	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3347	dist_nxr = nx - inflow_disturbance_begin
	3348	dist_nxl(1) = nx - inflow_disturbance_end
[1159]	3349	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3350	dist_nxl = inflow_disturbance_begin
	3351	dist_nxr(1) = inflow_disturbance_end
[73]	3352	ENDIF
[1159]	3353	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3354	dist_nyn = ny - inflow_disturbance_begin
	3355	dist_nys(1) = ny - inflow_disturbance_end
[1159]	3356	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3357	dist_nys = inflow_disturbance_begin
	3358	dist_nyn(1) = inflow_disturbance_end
	3359	ENDIF
	3360
	3361	!
[151]	3362	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3363	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[1159]	3364	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3365	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3366	'condition at the inflow boundary'
[226]	3367	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3368	ENDIF
	3369
	3370	!
[1060]	3371	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
[1103]	3372	!-- data from prerun in the first main run
	3373	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
	3374	initializing_actions /= 'read_restart_data' ) THEN
[1060]	3375	message_string = 'turbulent_inflow = .T. requires ' // &
	3376	'initializing_actions = ''cyclic_fill'' '
	3377	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3378	ENDIF
	3379
	3380	!
[151]	3381	!-- In case of turbulent inflow calculate the index of the recycling plane
	3382	IF ( turbulent_inflow ) THEN
	3383	IF ( recycling_width == 9999999.9 ) THEN
	3384	!
	3385	!-- Set the default value for the width of the recycling domain
	3386	recycling_width = 0.1 * nx * dx
	3387	ELSE
	3388	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3389	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3390	' ', recycling_width
[226]	3391	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3392	ENDIF
	3393	ENDIF
	3394	!
	3395	!-- Calculate the index
	3396	recycling_plane = recycling_width / dx
	3397	ENDIF
	3398
	3399	!
[1]	3400	!-- Check random generator
	3401	IF ( random_generator /= 'system-specific' .AND. &
	3402	random_generator /= 'numerical-recipes' ) THEN
[215]	3403	message_string = 'unknown random generator: random_generator = "' // &
	3404	TRIM( random_generator ) // '"'
[226]	3405	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3406	ENDIF
	3407
	3408	!
	3409	!-- Determine damping level index for 1D model
	3410	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3411	IF ( damp_level_1d == -1.0 ) THEN
	3412	damp_level_1d = zu(nzt+1)
	3413	damp_level_ind_1d = nzt + 1
	3414	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3415	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3416	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3417	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3418	ELSE
	3419	DO k = 1, nzt+1
	3420	IF ( damp_level_1d <= zu(k) ) THEN
	3421	damp_level_ind_1d = k
	3422	EXIT
	3423	ENDIF
	3424	ENDDO
	3425	ENDIF
	3426	ENDIF
[215]	3427
[1]	3428	!
	3429	!-- Check some other 1d-model parameters
	3430	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3431	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3432	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3433	'" is unknown'
[226]	3434	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3435	ENDIF
	3436	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3437	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3438	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3439	'" is unknown'
[226]	3440	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3441	ENDIF
	3442
	3443	!
	3444	!-- Set time for the next user defined restart (time_restart is the
	3445	!-- internal parameter for steering restart events)
	3446	IF ( restart_time /= 9999999.9 ) THEN
[291]	3447	IF ( restart_time > time_since_reference_point ) THEN
	3448	time_restart = restart_time
	3449	ENDIF
[1]	3450	ELSE
	3451	!
	3452	!-- In case of a restart run, set internal parameter to default (no restart)
	3453	!-- if the NAMELIST-parameter restart_time is omitted
	3454	time_restart = 9999999.9
	3455	ENDIF
	3456
	3457	!
	3458	!-- Set default value of the time needed to terminate a model run
	3459	IF ( termination_time_needed == -1.0 ) THEN
	3460	IF ( host(1:3) == 'ibm' ) THEN
	3461	termination_time_needed = 300.0
	3462	ELSE
	3463	termination_time_needed = 35.0
	3464	ENDIF
	3465	ENDIF
	3466
	3467	!
	3468	!-- Check the time needed to terminate a model run
	3469	IF ( host(1:3) == 't3e' ) THEN
	3470	!
	3471	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3472	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3473	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3474	WRITE( message_string, * ) 'termination_time_needed = ', &
	3475	termination_time_needed, ' must be > 30.0 on host "', &
	3476	TRIM( host ), '"'
[226]	3477	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3478	ENDIF
	3479	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3480	!
	3481	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3482	!-- because the job time consumed before executing palm (for compiling,
	3483	!-- copying of files, etc.) has to be regarded
	3484	IF ( termination_time_needed < 300.0 ) THEN
[215]	3485	WRITE( message_string, * ) 'termination_time_needed = ', &
	3486	termination_time_needed, ' should be >= 300.0 on host "', &
	3487	TRIM( host ), '"'
[226]	3488	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3489	ENDIF
	3490	ENDIF
	3491
[217]	3492	!
[240]	3493	!-- Check pressure gradient conditions
	3494	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3495	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3496	'w are .TRUE. but one of them must be .FALSE.'
[240]	3497	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3498	ENDIF
	3499	IF ( dp_external ) THEN
	3500	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3501	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3502	' of range'
	3503	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3504	ENDIF
	3505	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3506	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3507	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3508	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3509	ENDIF
	3510	ENDIF
	3511	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3512	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3513	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3514	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3515	ENDIF
[241]	3516	IF ( conserve_volume_flow ) THEN
	3517	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3518
	3519	conserve_volume_flow_mode = 'initial_profiles'
	3520
[241]	3521	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3522	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3523	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3524	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3525	conserve_volume_flow_mode
	3526	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3527	ENDIF
[667]	3528	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3529	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3530	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3531	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3532	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3533	ENDIF
	3534	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3535	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3536	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3537	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3538	' or ''bulk_velocity'''
	3539	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3540	ENDIF
	3541	ENDIF
	3542	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3543	( .NOT. conserve_volume_flow .OR. &
	3544	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3545	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3546	'conserve_volume_flow = .T. and ', &
[241]	3547	'conserve_volume_flow_mode = ''bulk_velocity'''
	3548	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3549	ENDIF
[240]	3550
	3551	!
[264]	3552	!-- Check particle attributes
	3553	IF ( particle_color /= 'none' ) THEN
	3554	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3555	particle_color /= 'z' ) THEN
	3556	message_string = 'illegal value for parameter particle_color: ' // &
	3557	TRIM( particle_color)
	3558	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3559	ELSE
	3560	IF ( color_interval(2) <= color_interval(1) ) THEN
	3561	message_string = 'color_interval(2) <= color_interval(1)'
	3562	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3563	ENDIF
	3564	ENDIF
	3565	ENDIF
	3566
	3567	IF ( particle_dvrpsize /= 'none' ) THEN
	3568	IF ( particle_dvrpsize /= 'absw' ) THEN
	3569	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3570	' ' // TRIM( particle_color)
	3571	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3572	ELSE
	3573	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3574	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3575	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3576	ENDIF
	3577	ENDIF
	3578	ENDIF
	3579
	3580	!
[217]	3581	!-- Check &userpar parameters
	3582	CALL user_check_parameters
[1]	3583
[217]	3584
[667]	3585
[1]	3586	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |