Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1211

Last change on this file since 1211 was 1211, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 139.7 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1054]	22	!
[1211]	23	!
[1054]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1211 2013-08-14 13:46:36Z raasch $
	27	!
[1211]	28	! 1210 2013-08-14 10:58:20Z raasch
	29	! check for fftw
	30	!
[1182]	31	! 1179 2013-06-14 05:57:58Z raasch
	32	! checks and settings of buoyancy parameters and switches revised,
	33	! initial profile for rho added to hom (id=77)
	34	!
[1175]	35	! 1174 2013-05-31 10:28:08Z gryschka
	36	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
	37	!
[1160]	38	! 1159 2013-05-21 11:58:22Z fricke
	39	! bc_lr/ns_dirneu/neudir removed
	40	!
[1116]	41	! 1115 2013-03-26 18:16:16Z hoffmann
	42	! unused variables removed
	43	! drizzle can be used without precipitation
	44	!
[1112]	45	! 1111 2013-03-08 23:54:10Z raasch
	46	! ibc_p_b = 2 removed
	47	!
[1104]	48	! 1103 2013-02-20 02:15:53Z raasch
	49	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
	50	!
[1093]	51	! 1092 2013-02-02 11:24:22Z raasch
	52	! unused variables removed
	53	!
[1070]	54	! 1069 2012-11-28 16:18:43Z maronga
	55	! allow usage of topography in combination with cloud physics
	56	!
[1066]	57	! 1065 2012-11-22 17:42:36Z hoffmann
	58	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	59	! precipitation in order to save computational resources.
	60	!
[1061]	61	! 1060 2012-11-21 07:19:51Z raasch
	62	! additional check for parameter turbulent_inflow
	63	!
[1054]	64	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	65	! necessary changes for the new two-moment cloud physics scheme added:
	66	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	67	! - plant_canopy is not allowed
	68	! - currently, only cache loop_optimization is allowed
	69	! - initial profiles of nr, qr
	70	! - boundary condition of nr, qr
	71	! - check output quantities (qr, nr, prr)
[979]	72	!
[1037]	73	! 1036 2012-10-22 13:43:42Z raasch
	74	! code put under GPL (PALM 3.9)
	75	!
[1035]	76	! 1031/1034 2012-10-22 11:32:49Z raasch
	77	! check of netcdf4 parallel file support
	78	!
[1020]	79	! 1019 2012-09-28 06:46:45Z raasch
	80	! non-optimized version of prognostic_equations not allowed any more
	81	!
[1017]	82	! 1015 2012-09-27 09:23:24Z raasch
	83	! acc allowed for loop optimization,
	84	! checks for adjustment of mixing length to the Prandtl mixing length removed
	85	!
[1004]	86	! 1003 2012-09-14 14:35:53Z raasch
	87	! checks for cases with unequal subdomain sizes removed
	88	!
[1002]	89	! 1001 2012-09-13 14:08:46Z raasch
	90	! all actions concerning leapfrog- and upstream-spline-scheme removed
	91	!
[997]	92	! 996 2012-09-07 10:41:47Z raasch
	93	! little reformatting
[1001]	94
[979]	95	! 978 2012-08-09 08:28:32Z fricke
[978]	96	! setting of bc_lr/ns_dirneu/neudir
	97	! outflow damping layer removed
	98	! check for z0h*
	99	! check for pt_damping_width
[667]	100	!
[965]	101	! 964 2012-07-26 09:14:24Z raasch
	102	! check of old profil-parameters removed
	103	!
[941]	104	! 940 2012-07-09 14:31:00Z raasch
	105	! checks for parameter neutral
	106	!
[925]	107	! 924 2012-06-06 07:44:41Z maronga
	108	! Bugfix: preprocessor directives caused error during compilation
	109	!
[893]	110	! 892 2012-05-02 13:51:44Z maronga
	111	! Bugfix for parameter file check ( excluding __netcdf4 )
	112	!
[867]	113	! 866 2012-03-28 06:44:41Z raasch
	114	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	115	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	116	! timestep
	117	!
[863]	118	! 861 2012-03-26 14:18:34Z suehring
	119	! Check for topography and ws-scheme removed.
	120	! Check for loop_optimization = 'vector' and ws-scheme removed.
	121	!
[846]	122	! 845 2012-03-07 10:23:05Z maronga
	123	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	124	!
[829]	125	! 828 2012-02-21 12:00:36Z raasch
	126	! check of collision_kernel extended
	127	!
[826]	128	! 825 2012-02-19 03:03:44Z raasch
	129	! check for collision_kernel and curvature_solution_effects
	130	!
[810]	131	! 809 2012-01-30 13:32:58Z maronga
	132	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	133	!
[808]	134	! 807 2012-01-25 11:53:51Z maronga
	135	! New cpp directive "__check" implemented which is used by check_namelist_files
	136	!
[775]	137	! 774 2011-10-27 13:34:16Z letzel
	138	! bugfix for prescribed u,v-profiles
	139	!
[768]	140	! 767 2011-10-14 06:39:12Z raasch
	141	! Calculating u,v-profiles from given profiles by linear interpolation.
	142	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	143	!
[708]	144	! 707 2011-03-29 11:39:40Z raasch
	145	! setting of bc_lr/ns_dirrad/raddir
	146	!
	147	! 689 2011-02-20 19:31:12z gryschka
[690]	148	! Bugfix for some logical expressions
	149	! (syntax was not compatible with all compilers)
[687]	150	!
[690]	151	! 680 2011-02-04 23:16:06Z gryschka
[681]	152	! init_vortex is not allowed with volume_flow_control
[668]	153	!
[674]	154	! 673 2011-01-18 16:19:48Z suehring
	155	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	156	!
[668]	157	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	158	! Exchange of parameters between ocean and atmosphere via PE0
	159	! Check for illegal combination of ws-scheme and timestep scheme.
	160	! Check for topography and ws-scheme.
	161	! Check for not cyclic boundary conditions in combination with ws-scheme and
	162	! loop_optimization = 'vector'.
	163	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	164	! Different processor/grid topology in atmosphere and ocean is now allowed!
	165	! Bugfixes in checking for conserve_volume_flow_mode
[601]	166	! 600 2010-11-24 16:10:51Z raasch
	167	! change due to new default value of surface_waterflux
[581]	168	! 580 2010-10-05 13:59:11Z heinze
[601]	169	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	170	!
[568]	171	! 567 2010-10-01 10:46:30Z helmke
	172	! calculating masks changed
	173	!
[565]	174	! 564 2010-09-30 13:18:59Z helmke
	175	! palm message identifiers of masked output changed, 20 replaced by max_masks
	176	!
[554]	177	! 553 2010-09-01 14:09:06Z weinreis
	178	! masks is calculated and removed from inipar
[532]	179	!
	180	! 531 2010-04-21 06:47:21Z heinze
	181	! Bugfix: unit of hyp changed to dbar
[392]	182	!
[525]	183	! 524 2010-03-30 02:04:51Z raasch
	184	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	185	!
[494]	186	! 493 2010-03-01 08:30:24Z raasch
	187	! netcdf_data_format is checked
	188	!
[449]	189	! 411 2009-12-11 14:15:58Z heinze
	190	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	191	! Initialization of large scale vertical motion (subsidence/ascent)
	192	!
	193	! 410 2009-12-04 17:05:40Z letzel
	194	! masked data output
	195	!
[392]	196	! 388 2009-09-23 09:40:33Z raasch
[388]	197	! Check profiles fpr prho and hyp.
[376]	198	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	199	! interval has been set, respective error message is included
[366]	200	! bc_lr_cyc and bc_ns_cyc are set,
[328]	201	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	202	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	203	! Coupling with independent precursor runs.
[264]	204	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	205	! Bugfix: pressure included for profile output
[240]	206	! Check pressure gradient conditions
[256]	207	! topography_grid_convention moved from user_check_parameters
	208	! 'single_street_canyon'
[367]	209	! Added shf* and qsws* to the list of available output data
[226]	210	!
	211	! 222 2009-01-12 16:04:16Z letzel
[217]	212	! +user_check_parameters
[213]	213	! Output of messages replaced by message handling routine.
[206]	214	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	215	! deleted __mpi2 directives
[222]	216	! Check that PALM is called with mrun -K parallel for coupling
[198]	217	!
	218	! 197 2008-09-16 15:29:03Z raasch
[177]	219	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	220	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	221	!
	222	! Strict grid matching along z is not needed for mg-solver.
[153]	223	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	224	! Case of reading data for recycling included in initializing_actions,
[197]	225	! check of turbulent_inflow and calculation of recycling_plane.
	226	! q*2 profile added
[139]	227	!
	228	! 138 2007-11-28 10:03:58Z letzel
[138]	229	! Plant canopy added
[132]	230	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	231	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	232	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	233	!
	234	! 109 2007-08-28 15:26:47Z letzel
[102]	235	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	236	! conditions for temperature and fluxes) in case of coupled runs.
	237	! +profiles for wp and w"e
[104]	238	! Bugfix: Error message concerning output of particle concentration (pc)
	239	! modified
[108]	240	! More checks and more default values for coupled runs
	241	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	242	! cloud_physics = .T.)
	243	! Rayleigh damping for ocean fixed.
[109]	244	! Check and, if necessary, set default value for dt_coupling
[98]	245	!
	246	! 97 2007-06-21 08:23:15Z raasch
[97]	247	! Initial salinity profile is calculated, salinity boundary conditions are
	248	! checked,
[94]	249	! z_max_do1d is checked only in case of ocean = .f.,
[97]	250	! +initial temperature and geostrophic velocity profiles for the ocean version,
	251	! use_pt_reference renamed use_reference
[77]	252	!
[90]	253	! 89 2007-05-25 12:08:31Z raasch
	254	! Check for user-defined profiles
	255	!
[77]	256	! 75 2007-03-22 09:54:05Z raasch
[51]	257	! "by_user" allowed as initializing action, -data_output_ts,
[63]	258	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	259	! and pt_reference are checked, moisture renamed humidity,
[72]	260	! output of precipitation amount/rate and roughnes length + check
[73]	261	! possible negative humidities are avoided in initial profile,
[75]	262	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	263	! revision added to run_description_header
[1]	264	!
[39]	265	! 20 2007-02-26 00:12:32Z raasch
	266	! Temperature and humidity gradients at top are now calculated for nzt+1,
	267	! top_heatflux and respective boundary condition bc_pt_t is checked
	268	!
[3]	269	! RCS Log replace by Id keyword, revision history cleaned up
	270	!
[1]	271	! Revision 1.61 2006/08/04 14:20:25 raasch
	272	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	273	! use_upstream_for_tke, default value for dt_dopts,
	274	! generation of file header moved from routines palm and header to here
	275	!
	276	! Revision 1.1 1997/08/26 06:29:23 raasch
	277	! Initial revision
	278	!
	279	!
	280	! Description:
	281	! ------------
	282	! Check control parameters and deduce further quantities.
	283	!------------------------------------------------------------------------------!
	284
	285	USE arrays_3d
[824]	286	USE cloud_parameters
[1]	287	USE constants
	288	USE control_parameters
[264]	289	USE dvrp_variables
[1]	290	USE grid_variables
	291	USE indices
	292	USE model_1d
	293	USE netcdf_control
	294	USE particle_attributes
	295	USE pegrid
	296	USE profil_parameter
[411]	297	USE subsidence_mod
[1]	298	USE statistics
	299	USE transpose_indices
	300
	301	IMPLICIT NONE
	302
	303	CHARACTER (LEN=1) :: sq
	304	CHARACTER (LEN=6) :: var
	305	CHARACTER (LEN=7) :: unit
	306	CHARACTER (LEN=8) :: date
	307	CHARACTER (LEN=10) :: time
[102]	308	CHARACTER (LEN=40) :: coupling_string
[1]	309	CHARACTER (LEN=100) :: action
	310
[1092]	311	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	312	LOGICAL :: found, ldum
[1092]	313	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	314
	315	!
	316	!-- Warning, if host is not set
	317	IF ( host(1:1) == ' ' ) THEN
[213]	318	message_string = '"host" is not set. Please check that environment ' // &
	319	'variable "localhost" & is set before running PALM'
[226]	320	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	321	ENDIF
	322
	323	!
[102]	324	!-- Check the coupling mode
	325	IF ( coupling_mode /= 'uncoupled' .AND. &
	326	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	327	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	328	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	329	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	330	ENDIF
	331
	332	!
[108]	333	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	334	IF ( coupling_mode /= 'uncoupled') THEN
[213]	335
[108]	336	IF ( dt_coupling == 9999999.9 ) THEN
[213]	337	message_string = 'dt_coupling is not set but required for coup' // &
	338	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	339	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	340	ENDIF
[213]	341
[206]	342	#if defined( __parallel )
[807]	343
	344	!
	345	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	346	!-- program.
	347	!-- check_namelist_files will need the following information of the other
	348	!-- model (atmosphere/ocean).
[845]	349	! dt_coupling = remote
	350	! dt_max = remote
	351	! restart_time = remote
	352	! dt_restart= remote
	353	! simulation_time_since_reference = remote
	354	! dx = remote
[807]	355
	356
[809]	357	#if ! defined( __check )
[667]	358	IF ( myid == 0 ) THEN
	359	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	360	ierr )
	361	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	362	status, ierr )
	363	ENDIF
	364	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	365	#endif
[108]	366	IF ( dt_coupling /= remote ) THEN
[213]	367	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	368	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	369	'dt_coupling_remote = ', remote
[226]	370	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	371	ENDIF
[109]	372	IF ( dt_coupling <= 0.0 ) THEN
[809]	373	#if ! defined( __check )
[667]	374	IF ( myid == 0 ) THEN
	375	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	376	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	377	status, ierr )
	378	ENDIF
	379	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	380	#endif
[109]	381	dt_coupling = MAX( dt_max, remote )
[213]	382	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	383	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	384	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	385	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	386	ENDIF
[809]	387	#if ! defined( __check )
[667]	388	IF ( myid == 0 ) THEN
	389	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	390	ierr )
	391	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	392	status, ierr )
	393	ENDIF
	394	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	395	#endif
[108]	396	IF ( restart_time /= remote ) THEN
[213]	397	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	398	'": restart_time = ', restart_time, '& is not equal to ', &
	399	'restart_time_remote = ', remote
[226]	400	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	401	ENDIF
[809]	402	#if ! defined( __check )
[667]	403	IF ( myid == 0 ) THEN
	404	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	405	ierr )
	406	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	407	status, ierr )
	408	ENDIF
	409	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	410	#endif
[108]	411	IF ( dt_restart /= remote ) THEN
[213]	412	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	413	'": dt_restart = ', dt_restart, '& is not equal to ', &
	414	'dt_restart_remote = ', remote
[226]	415	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	416	ENDIF
[213]	417
[291]	418	simulation_time_since_reference = end_time - coupling_start_time
[809]	419	#if ! defined( __check )
[667]	420	IF ( myid == 0 ) THEN
	421	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	422	14, comm_inter, ierr )
	423	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	424	status, ierr )
	425	ENDIF
	426	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	427	#endif
[291]	428	IF ( simulation_time_since_reference /= remote ) THEN
[213]	429	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	430	'": simulation_time_since_reference = ', &
	431	simulation_time_since_reference, '& is not equal to ', &
	432	'simulation_time_since_reference_remote = ', remote
[226]	433	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	434	ENDIF
[213]	435
[809]	436	#if ! defined( __check )
[667]	437	IF ( myid == 0 ) THEN
	438	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	439	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	440	status, ierr )
[108]	441	ENDIF
[667]	442	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	443
[807]	444	#endif
[667]	445	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	446
	447	IF ( dx < remote ) THEN
	448	WRITE( message_string, * ) 'coupling mode "', &
	449	TRIM( coupling_mode ), &
	450	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	451	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	452	ENDIF
	453
	454	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	455	WRITE( message_string, * ) 'coupling mode "', &
	456	TRIM( coupling_mode ), &
	457	'": Domain size in x-direction is not equal in ocean and atmosphere'
	458	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	459	ENDIF
	460
[108]	461	ENDIF
[213]	462
[809]	463	#if ! defined( __check )
[667]	464	IF ( myid == 0) THEN
	465	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	466	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	467	status, ierr )
[108]	468	ENDIF
[667]	469	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	470	#endif
[667]	471	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	472
	473	IF ( dy < remote ) THEN
	474	WRITE( message_string, * ) 'coupling mode "', &
	475	TRIM( coupling_mode ), &
	476	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	477	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	478	ENDIF
	479
	480	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	481	WRITE( message_string, * ) 'coupling mode "', &
	482	TRIM( coupling_mode ), &
	483	'": Domain size in y-direction is not equal in ocean and atmosphere'
	484	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	485	ENDIF
	486
	487	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	488	WRITE( message_string, * ) 'coupling mode "', &
	489	TRIM( coupling_mode ), &
	490	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	491	' atmosphere'
	492	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	493	ENDIF
	494
	495	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	496	WRITE( message_string, * ) 'coupling mode "', &
	497	TRIM( coupling_mode ), &
	498	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	499	' atmosphere'
	500	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	501	ENDIF
	502
[108]	503	ENDIF
[222]	504	#else
	505	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	506	' ''mrun -K parallel'''
[226]	507	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	508	#endif
	509	ENDIF
	510
[809]	511	#if defined( __parallel ) && ! defined ( __check )
[108]	512	!
	513	!-- Exchange via intercommunicator
[667]	514	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	515	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	516	ierr )
[667]	517	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	518	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	519	comm_inter, status, ierr )
[108]	520	ENDIF
[667]	521	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	522
[108]	523	#endif
	524
	525
	526	!
[1]	527	!-- Generate the file header which is used as a header for most of PALM's
	528	!-- output files
	529	CALL DATE_AND_TIME( date, time )
	530	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	531	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	532	IF ( coupling_mode == 'uncoupled' ) THEN
	533	coupling_string = ''
	534	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	535	coupling_string = ' coupled (atmosphere)'
	536	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	537	coupling_string = ' coupled (ocean)'
	538	ENDIF
[1]	539
[102]	540	WRITE ( run_description_header, &
	541	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	542	TRIM( version ), TRIM( revision ), 'run: ', &
	543	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	544	'host: ', TRIM( host ), run_date, run_time
[1]	545
	546	!
[63]	547	!-- Check the general loop optimization method
	548	IF ( loop_optimization == 'default' ) THEN
	549	IF ( host(1:3) == 'nec' ) THEN
	550	loop_optimization = 'vector'
	551	ELSE
	552	loop_optimization = 'cache'
	553	ENDIF
	554	ENDIF
	555
[1015]	556	SELECT CASE ( TRIM( loop_optimization ) )
	557
[1019]	558	CASE ( 'acc', 'cache', 'vector' )
[1015]	559	CONTINUE
	560
	561	CASE DEFAULT
	562	message_string = 'illegal value given for loop_optimization: "' // &
	563	TRIM( loop_optimization ) // '"'
	564	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	565
	566	END SELECT
	567
[63]	568	!
[1]	569	!-- Check topography setting (check for illegal parameter combinations)
	570	IF ( topography /= 'flat' ) THEN
	571	action = ' '
[861]	572	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	573	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	574	ENDIF
[861]	575	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	576	THEN
[1]	577	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	578	ENDIF
[114]	579	IF ( psolver == 'sor' ) THEN
[1]	580	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	581	ENDIF
	582	IF ( sloping_surface ) THEN
	583	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	584	ENDIF
	585	IF ( galilei_transformation ) THEN
	586	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	587	ENDIF
[1115]	588	IF ( cloud_physics ) THEN
	589	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	590	ENDIF
[1]	591	IF ( cloud_droplets ) THEN
[1115]	592	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
[1]	593	ENDIF
	594	IF ( .NOT. prandtl_layer ) THEN
	595	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	596	ENDIF
	597	IF ( action /= ' ' ) THEN
[213]	598	message_string = 'a non-flat topography does not allow ' // &
	599	TRIM( action )
[226]	600	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	601	ENDIF
[256]	602	!
	603	!-- In case of non-flat topography, check whether the convention how to
	604	!-- define the topography grid has been set correctly, or whether the default
	605	!-- is applicable. If this is not possible, abort.
	606	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	607	IF ( TRIM( topography ) /= 'single_building' .AND. &
	608	TRIM( topography ) /= 'single_street_canyon' .AND. &
	609	TRIM( topography ) /= 'read_from_file' ) THEN
	610	!-- The default value is not applicable here, because it is only valid
	611	!-- for the two standard cases 'single_building' and 'read_from_file'
	612	!-- defined in init_grid.
	613	WRITE( message_string, * ) &
	614	'The value for "topography_grid_convention" ', &
	615	'is not set. Its default value is & only valid for ', &
	616	'"topography" = ''single_building'', ', &
	617	'''single_street_canyon'' & or ''read_from_file''.', &
	618	' & Choose ''cell_edge'' or ''cell_center''.'
	619	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	620	ELSE
	621	!-- The default value is applicable here.
	622	!-- Set convention according to topography.
	623	IF ( TRIM( topography ) == 'single_building' .OR. &
	624	TRIM( topography ) == 'single_street_canyon' ) THEN
	625	topography_grid_convention = 'cell_edge'
	626	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	627	topography_grid_convention = 'cell_center'
	628	ENDIF
	629	ENDIF
	630	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	631	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	632	WRITE( message_string, * ) &
	633	'The value for "topography_grid_convention" is ', &
	634	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	635	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	636	ENDIF
	637
[1]	638	ENDIF
[94]	639
[1]	640	!
[94]	641	!-- Check ocean setting
	642	IF ( ocean ) THEN
[332]	643
[94]	644	action = ' '
	645	IF ( action /= ' ' ) THEN
[213]	646	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	647	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	648	ENDIF
	649
[332]	650	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	651	TRIM( coupling_char ) == '_O' ) THEN
[343]	652
[94]	653	!
[332]	654	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	655	!-- ocean run (this setting is done via mrun-option -y)
[343]	656
[291]	657	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	658	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	659	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	660
[291]	661	ENDIF
	662	!
[1053]	663	!-- Check cloud scheme
	664	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	665	icloud_scheme = 0
	666	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	667	icloud_scheme = 1
	668	ELSE
	669	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	670	TRIM( cloud_scheme ) // '"'
	671	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	672	ENDIF
	673	!
[1]	674	!-- Check whether there are any illegal values
	675	!-- Pressure solver:
	676	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	677	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	678	message_string = 'unknown solver for perturbation pressure: psolver' // &
	679	' = "' // TRIM( psolver ) // '"'
[226]	680	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	681	ENDIF
	682
	683	#if defined( __parallel )
	684	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	685	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	686	'for a 1d domain-decomposition along x & please do' // &
	687	' not set npey/=1 in the parameter file'
[226]	688	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	689	ENDIF
	690	#else
	691	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	692	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	693	' for a parallel environment'
[226]	694	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	695	ENDIF
	696	#endif
	697
	698	IF ( psolver == 'multigrid' ) THEN
	699	IF ( cycle_mg == 'w' ) THEN
	700	gamma_mg = 2
	701	ELSEIF ( cycle_mg == 'v' ) THEN
	702	gamma_mg = 1
	703	ELSE
[213]	704	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	705	TRIM( cycle_mg ) // '"'
[226]	706	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	707	ENDIF
	708	ENDIF
	709
	710	IF ( fft_method /= 'singleton-algorithm' .AND. &
	711	fft_method /= 'temperton-algorithm' .AND. &
[1210]	712	fft_method /= 'fftw' .AND. &
[1]	713	fft_method /= 'system-specific' ) THEN
[213]	714	message_string = 'unknown fft-algorithm: fft_method = "' // &
	715	TRIM( fft_method ) // '"'
[226]	716	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	717	ENDIF
[667]	718
	719	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	720	.NOT. call_psolver_at_all_substeps ) THEN
[667]	721	message_string = 'psolver must be called at each RK3 substep when "'//&
	722	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	723	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	724	END IF
[1]	725	!
	726	!-- Advection schemes:
[1001]	727	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	728	THEN
[214]	729	message_string = 'unknown advection scheme: momentum_advec = "' // &
	730	TRIM( momentum_advec ) // '"'
[226]	731	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	732	ENDIF
[1001]	733	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	734	.AND. ( timestep_scheme == 'euler' .OR. &
	735	timestep_scheme == 'runge-kutta-2' ) ) &
	736	THEN
[667]	737	message_string = 'momentum_advec or scalar_advec = "' &
	738	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	739	TRIM( timestep_scheme ) // '"'
[226]	740	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	741	ENDIF
[667]	742	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	743	scalar_advec /= 'bc-scheme' ) &
	744	THEN
[214]	745	message_string = 'unknown advection scheme: scalar_advec = "' // &
	746	TRIM( scalar_advec ) // '"'
[226]	747	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	748	ENDIF
[1019]	749	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	750	THEN
	751	message_string = 'advection_scheme scalar_advec = "' &
	752	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	753	TRIM( loop_optimization ) // '"'
	754	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	755	ENDIF
[1]	756
	757	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	758	use_upstream_for_tke = .TRUE.
[214]	759	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	760	'use_sgs_for_particles = .TRUE.'
[226]	761	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	762	ENDIF
	763
[824]	764	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	765	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	766	'curvature_solution_effects = .TRUE.'
	767	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	768	ENDIF
	769
[1]	770	!
[1019]	771	!-- Set LOGICAL switches to enhance performance
	772	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	773	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	774
	775	!
[1]	776	!-- Timestep schemes:
	777	SELECT CASE ( TRIM( timestep_scheme ) )
	778
	779	CASE ( 'euler' )
	780	intermediate_timestep_count_max = 1
	781
	782	CASE ( 'runge-kutta-2' )
	783	intermediate_timestep_count_max = 2
	784
	785	CASE ( 'runge-kutta-3' )
	786	intermediate_timestep_count_max = 3
	787
	788	CASE DEFAULT
[214]	789	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	790	TRIM( timestep_scheme ) // '"'
[226]	791	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	792
	793	END SELECT
	794
[667]	795	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	796	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	797	message_string = 'momentum advection scheme "' // &
	798	TRIM( momentum_advec ) // '" & does not work with ' // &
	799	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	800	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	801	ENDIF
	802
[825]	803	!
	804	!-- Collision kernels:
	805	SELECT CASE ( TRIM( collision_kernel ) )
	806
[828]	807	CASE ( 'hall', 'hall_fast' )
[825]	808	hall_kernel = .TRUE.
	809
	810	CASE ( 'palm' )
	811	palm_kernel = .TRUE.
	812
[828]	813	CASE ( 'wang', 'wang_fast' )
[825]	814	wang_kernel = .TRUE.
	815
	816	CASE ( 'none' )
	817
	818
	819	CASE DEFAULT
	820	message_string = 'unknown collision kernel: collision_kernel = "' // &
	821	TRIM( collision_kernel ) // '"'
	822	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	823
	824	END SELECT
[828]	825	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	826
[147]	827	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	828	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	829	!
[214]	830	!-- No restart run: several initialising actions are possible
[1]	831	action = initializing_actions
	832	DO WHILE ( TRIM( action ) /= '' )
	833	position = INDEX( action, ' ' )
	834	SELECT CASE ( action(1:position-1) )
	835
	836	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	837	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	838	action = action(position+1:)
	839
	840	CASE DEFAULT
[214]	841	message_string = 'initializing_action = "' // &
	842	TRIM( action ) // '" unkown or not allowed'
[226]	843	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	844
	845	END SELECT
	846	ENDDO
	847	ENDIF
[214]	848
[680]	849	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	850	conserve_volume_flow ) THEN
	851	message_string = 'initializing_actions = "initialize_vortex"' // &
	852	' ist not allowed with conserve_volume_flow = .T.'
	853	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	854	ENDIF
	855
	856
[1]	857	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	858	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	859	message_string = 'initializing_actions = "set_constant_profiles"' // &
	860	' and "set_1d-model_profiles" are not allowed ' // &
	861	'simultaneously'
[226]	862	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	863	ENDIF
[214]	864
[46]	865	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	866	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	867	message_string = 'initializing_actions = "set_constant_profiles"' // &
	868	' and "by_user" are not allowed simultaneously'
[226]	869	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	870	ENDIF
[214]	871
[46]	872	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	873	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	874	message_string = 'initializing_actions = "by_user" and ' // &
	875	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	876	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	877	ENDIF
[1]	878
[75]	879	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	880	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	881	'not allowed with humidity = ', humidity
[226]	882	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	883	ENDIF
	884
[72]	885	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	886	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	887	'not allowed with cloud_physics = ', cloud_physics
[226]	888	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	889	ENDIF
	890
[75]	891	IF ( humidity .AND. sloping_surface ) THEN
[214]	892	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	893	'are not allowed simultaneously'
[226]	894	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	895	ENDIF
	896
[75]	897	IF ( passive_scalar .AND. humidity ) THEN
[214]	898	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	899	'is not allowed simultaneously'
[226]	900	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	901	ENDIF
	902
[138]	903	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	904	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	905	'coefficient & given value is drag_coefficient = 0.0'
[226]	906	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	907	ENDIF
	908
[1053]	909	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	910	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	911	' seifert_beheng'
	912	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	913	ENDIF
	914
	915	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	916	icloud_scheme == 0 ) THEN
	917	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	918	'loop_optimization = cache'
	919	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	920	ENDIF
	921
[1115]	922	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	923	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
	924	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
	925	! 'precipitation = .TRUE. or drizzle = .TRUE.'
	926	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	927	! ENDIF
[1065]	928
[1]	929	!
	930	!-- In case of no model continuation run, check initialising parameters and
	931	!-- deduce further quantities
	932	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	933
	934	!
[767]	935	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	936	pt_init = pt_surface
[1053]	937	IF ( humidity ) THEN
	938	q_init = q_surface
	939	ENDIF
[94]	940	IF ( ocean ) sa_init = sa_surface
	941	IF ( passive_scalar ) q_init = s_surface
[138]	942	IF ( plant_canopy ) lad = 0.0
[1]	943
	944	!
	945	!--
	946	!-- If required, compute initial profile of the geostrophic wind
	947	!-- (component ug)
	948	i = 1
	949	gradient = 0.0
[97]	950
	951	IF ( .NOT. ocean ) THEN
	952
	953	ug_vertical_gradient_level_ind(1) = 0
	954	ug(0) = ug_surface
	955	DO k = 1, nzt+1
[177]	956	IF ( i < 11 ) THEN
	957	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	958	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	959	gradient = ug_vertical_gradient(i) / 100.0
	960	ug_vertical_gradient_level_ind(i) = k - 1
	961	i = i + 1
[1]	962	ENDIF
[177]	963	ENDIF
[97]	964	IF ( gradient /= 0.0 ) THEN
	965	IF ( k /= 1 ) THEN
	966	ug(k) = ug(k-1) + dzu(k) * gradient
	967	ELSE
[1174]	968	ug(k) = ug_surface + dzu(k) * gradient
[97]	969	ENDIF
[1]	970	ELSE
[97]	971	ug(k) = ug(k-1)
[1]	972	ENDIF
[97]	973	ENDDO
[1]	974
[97]	975	ELSE
	976
	977	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	978	ug(nzt+1) = ug_surface
[667]	979	DO k = nzt, nzb, -1
[177]	980	IF ( i < 11 ) THEN
	981	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	982	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	983	gradient = ug_vertical_gradient(i) / 100.0
	984	ug_vertical_gradient_level_ind(i) = k + 1
	985	i = i + 1
[97]	986	ENDIF
	987	ENDIF
	988	IF ( gradient /= 0.0 ) THEN
	989	IF ( k /= nzt ) THEN
	990	ug(k) = ug(k+1) - dzu(k+1) * gradient
	991	ELSE
	992	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	993	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	994	ENDIF
	995	ELSE
	996	ug(k) = ug(k+1)
	997	ENDIF
	998	ENDDO
	999
	1000	ENDIF
	1001
[1]	1002	!
[767]	1003	!-- In case of no given gradients for ug, choose a zero gradient
[97]	1004	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1005	ug_vertical_gradient_level(1) = 0.0
	1006	ENDIF
	1007
	1008	!
	1009	!--
	1010	!-- If required, compute initial profile of the geostrophic wind
	1011	!-- (component vg)
	1012	i = 1
	1013	gradient = 0.0
[97]	1014
	1015	IF ( .NOT. ocean ) THEN
	1016
	1017	vg_vertical_gradient_level_ind(1) = 0
	1018	vg(0) = vg_surface
	1019	DO k = 1, nzt+1
[177]	1020	IF ( i < 11 ) THEN
	1021	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1022	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1023	gradient = vg_vertical_gradient(i) / 100.0
	1024	vg_vertical_gradient_level_ind(i) = k - 1
	1025	i = i + 1
[1]	1026	ENDIF
	1027	ENDIF
[97]	1028	IF ( gradient /= 0.0 ) THEN
	1029	IF ( k /= 1 ) THEN
	1030	vg(k) = vg(k-1) + dzu(k) * gradient
	1031	ELSE
[1174]	1032	vg(k) = vg_surface + dzu(k) * gradient
[97]	1033	ENDIF
[1]	1034	ELSE
[97]	1035	vg(k) = vg(k-1)
[1]	1036	ENDIF
[97]	1037	ENDDO
[1]	1038
[97]	1039	ELSE
	1040
[121]	1041	vg_vertical_gradient_level_ind(1) = nzt+1
	1042	vg(nzt+1) = vg_surface
[667]	1043	DO k = nzt, nzb, -1
[177]	1044	IF ( i < 11 ) THEN
	1045	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1046	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1047	gradient = vg_vertical_gradient(i) / 100.0
	1048	vg_vertical_gradient_level_ind(i) = k + 1
	1049	i = i + 1
[97]	1050	ENDIF
	1051	ENDIF
	1052	IF ( gradient /= 0.0 ) THEN
	1053	IF ( k /= nzt ) THEN
	1054	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1055	ELSE
	1056	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1057	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1058	ENDIF
	1059	ELSE
	1060	vg(k) = vg(k+1)
	1061	ENDIF
	1062	ENDDO
	1063
	1064	ENDIF
	1065
[1]	1066	!
[767]	1067	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1068	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1069	vg_vertical_gradient_level(1) = 0.0
	1070	ENDIF
	1071
	1072	!
[767]	1073	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1074	!-- interpolate them from wind profile data (if given)
	1075	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1076
	1077	u_init = ug
	1078	v_init = vg
	1079
	1080	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1081
	1082	IF ( uv_heights(1) /= 0.0 ) THEN
	1083	message_string = 'uv_heights(1) must be 0.0'
	1084	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1085	ENDIF
	1086
	1087	use_prescribed_profile_data = .TRUE.
	1088
	1089	kk = 1
	1090	u_init(0) = 0.0
	1091	v_init(0) = 0.0
	1092
	1093	DO k = 1, nz+1
	1094
	1095	IF ( kk < 100 ) THEN
	1096	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1097	kk = kk + 1
	1098	IF ( kk == 100 ) EXIT
	1099	ENDDO
	1100	ENDIF
	1101
[774]	1102	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1103	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1104	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1105	( u_profile(kk+1) - u_profile(kk) )
	1106	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1107	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1108	( v_profile(kk+1) - v_profile(kk) )
	1109	ELSE
	1110	u_init(k) = u_profile(kk)
	1111	v_init(k) = v_profile(kk)
	1112	ENDIF
	1113
	1114	ENDDO
	1115
	1116	ELSE
	1117
	1118	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1119	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1120
	1121	ENDIF
	1122
	1123	!
[94]	1124	!-- Compute initial temperature profile using the given temperature gradients
[940]	1125	IF ( .NOT. neutral ) THEN
[94]	1126
[940]	1127	i = 1
	1128	gradient = 0.0
[94]	1129
[940]	1130	IF ( .NOT. ocean ) THEN
	1131
	1132	pt_vertical_gradient_level_ind(1) = 0
	1133	DO k = 1, nzt+1
	1134	IF ( i < 11 ) THEN
	1135	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1136	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1137	gradient = pt_vertical_gradient(i) / 100.0
	1138	pt_vertical_gradient_level_ind(i) = k - 1
	1139	i = i + 1
	1140	ENDIF
[1]	1141	ENDIF
[940]	1142	IF ( gradient /= 0.0 ) THEN
	1143	IF ( k /= 1 ) THEN
	1144	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1145	ELSE
[1174]	1146	pt_init(k) = pt_surface + dzu(k) * gradient
[940]	1147	ENDIF
[94]	1148	ELSE
[940]	1149	pt_init(k) = pt_init(k-1)
[94]	1150	ENDIF
[940]	1151	ENDDO
[1]	1152
[940]	1153	ELSE
[94]	1154
[940]	1155	pt_vertical_gradient_level_ind(1) = nzt+1
	1156	DO k = nzt, 0, -1
	1157	IF ( i < 11 ) THEN
	1158	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1159	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1160	gradient = pt_vertical_gradient(i) / 100.0
	1161	pt_vertical_gradient_level_ind(i) = k + 1
	1162	i = i + 1
	1163	ENDIF
[94]	1164	ENDIF
[940]	1165	IF ( gradient /= 0.0 ) THEN
	1166	IF ( k /= nzt ) THEN
	1167	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1168	ELSE
	1169	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1170	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1171	ENDIF
[94]	1172	ELSE
[940]	1173	pt_init(k) = pt_init(k+1)
[94]	1174	ENDIF
[940]	1175	ENDDO
[94]	1176
[940]	1177	ENDIF
	1178
[94]	1179	ENDIF
	1180
[1]	1181	!
	1182	!-- In case of no given temperature gradients, choose gradient of neutral
	1183	!-- stratification
[94]	1184	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1185	pt_vertical_gradient_level(1) = 0.0
	1186	ENDIF
	1187
	1188	!
[94]	1189	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1190	!-- boundary condition
[19]	1191	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1192
	1193	!
	1194	!-- If required, compute initial humidity or scalar profile using the given
	1195	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1196	!-- values of the scalar parameters on humidity parameters
	1197	IF ( passive_scalar ) THEN
	1198	bc_q_b = bc_s_b
	1199	bc_q_t = bc_s_t
	1200	q_surface = s_surface
	1201	q_surface_initial_change = s_surface_initial_change
	1202	q_vertical_gradient = s_vertical_gradient
	1203	q_vertical_gradient_level = s_vertical_gradient_level
	1204	surface_waterflux = surface_scalarflux
[407]	1205	wall_humidityflux = wall_scalarflux
[1]	1206	ENDIF
	1207
[75]	1208	IF ( humidity .OR. passive_scalar ) THEN
[1]	1209
	1210	i = 1
	1211	gradient = 0.0
	1212	q_vertical_gradient_level_ind(1) = 0
	1213	DO k = 1, nzt+1
[177]	1214	IF ( i < 11 ) THEN
	1215	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1216	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1217	gradient = q_vertical_gradient(i) / 100.0
	1218	q_vertical_gradient_level_ind(i) = k - 1
	1219	i = i + 1
[1]	1220	ENDIF
	1221	ENDIF
	1222	IF ( gradient /= 0.0 ) THEN
	1223	IF ( k /= 1 ) THEN
	1224	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1225	ELSE
[1174]	1226	q_init(k) = q_init(k-1) + dzu(k) * gradient
[1]	1227	ENDIF
	1228	ELSE
	1229	q_init(k) = q_init(k-1)
	1230	ENDIF
[72]	1231	!
	1232	!-- Avoid negative humidities
	1233	IF ( q_init(k) < 0.0 ) THEN
	1234	q_init(k) = 0.0
	1235	ENDIF
[1]	1236	ENDDO
	1237
	1238	!
	1239	!-- In case of no given humidity gradients, choose zero gradient
	1240	!-- conditions
	1241	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1242	q_vertical_gradient_level(1) = 0.0
	1243	ENDIF
	1244	!
[1053]	1245	!-- Store humidity, rain water content and rain drop concentration
	1246	!-- gradient at the top boundary for possile Neumann boundary condition
	1247	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1248	ENDIF
	1249
[94]	1250	!
	1251	!-- If required, compute initial salinity profile using the given salinity
	1252	!-- gradients
	1253	IF ( ocean ) THEN
	1254
	1255	i = 1
	1256	gradient = 0.0
	1257
	1258	sa_vertical_gradient_level_ind(1) = nzt+1
	1259	DO k = nzt, 0, -1
[177]	1260	IF ( i < 11 ) THEN
	1261	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1262	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1263	gradient = sa_vertical_gradient(i) / 100.0
	1264	sa_vertical_gradient_level_ind(i) = k + 1
	1265	i = i + 1
[94]	1266	ENDIF
	1267	ENDIF
	1268	IF ( gradient /= 0.0 ) THEN
	1269	IF ( k /= nzt ) THEN
	1270	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1271	ELSE
	1272	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1273	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1274	ENDIF
	1275	ELSE
	1276	sa_init(k) = sa_init(k+1)
	1277	ENDIF
	1278	ENDDO
	1279
	1280	ENDIF
	1281
[138]	1282	!
[388]	1283	!-- If required compute the profile of leaf area density used in the plant
	1284	!-- canopy model
[138]	1285	IF ( plant_canopy ) THEN
	1286
	1287	i = 1
	1288	gradient = 0.0
[1]	1289
[138]	1290	IF ( .NOT. ocean ) THEN
[153]	1291
	1292	lad(0) = lad_surface
[138]	1293
	1294	lad_vertical_gradient_level_ind(1) = 0
	1295	DO k = 1, pch_index
[177]	1296	IF ( i < 11 ) THEN
	1297	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1298	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1299	gradient = lad_vertical_gradient(i)
	1300	lad_vertical_gradient_level_ind(i) = k - 1
	1301	i = i + 1
[138]	1302	ENDIF
	1303	ENDIF
	1304	IF ( gradient /= 0.0 ) THEN
	1305	IF ( k /= 1 ) THEN
	1306	lad(k) = lad(k-1) + dzu(k) * gradient
	1307	ELSE
[1174]	1308	lad(k) = lad_surface + dzu(k) *gradient
[138]	1309	ENDIF
	1310	ELSE
	1311	lad(k) = lad(k-1)
	1312	ENDIF
	1313	ENDDO
	1314
	1315	ENDIF
	1316
[1]	1317	!
[388]	1318	!-- In case of no given leaf area density gradients, choose a vanishing
	1319	!-- gradient
[138]	1320	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1321	lad_vertical_gradient_level(1) = 0.0
	1322	ENDIF
	1323
	1324	ENDIF
	1325
	1326	ENDIF
[411]	1327
	1328	!
	1329	!-- Initialize large scale subsidence if required
[580]	1330	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1331	large_scale_subsidence = .TRUE.
	1332	CALL init_w_subsidence
[1179]	1333	ENDIF
[667]	1334
[138]	1335	!
[1]	1336	!-- Compute Coriolis parameter
	1337	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1338	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1339
	1340	!
[1179]	1341	!-- Check and set buoyancy related parameters and switches
	1342	IF ( reference_state == 'horizontal_average' ) THEN
	1343	CONTINUE
	1344	ELSEIF ( reference_state == 'initial_profile' ) THEN
	1345	use_initial_profile_as_reference = .TRUE.
	1346	ELSEIF ( reference_state == 'single_value' ) THEN
	1347	use_single_reference_value = .TRUE.
	1348	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
	1349	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
	1350	ELSE
	1351	message_string = 'illegal value for reference_state: "' // &
	1352	TRIM( reference_state ) // '"'
	1353	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
	1354	ENDIF
[57]	1355
	1356	!
[1179]	1357	!-- Ocean runs always use reference values in the buoyancy term
	1358	IF ( ocean ) THEN
	1359	reference_state = 'single_value'
	1360	use_single_reference_value = .TRUE.
	1361	ENDIF
[97]	1362
	1363	!
	1364	!-- Sign of buoyancy/stability terms
	1365	IF ( ocean ) atmos_ocean_sign = -1.0
	1366
	1367	!
[108]	1368	!-- Ocean version must use flux boundary conditions at the top
	1369	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1370	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1371	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1372	ENDIF
[97]	1373
	1374	!
[1]	1375	!-- In case of a given slope, compute the relevant quantities
	1376	IF ( alpha_surface /= 0.0 ) THEN
	1377	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1378	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1379	' ) must be < 90.0'
[226]	1380	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1381	ENDIF
	1382	sloping_surface = .TRUE.
	1383	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1384	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1385	ENDIF
	1386
	1387	!
	1388	!-- Check time step and cfl_factor
	1389	IF ( dt /= -1.0 ) THEN
	1390	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1391	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1392	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1393	ENDIF
	1394	dt_3d = dt
	1395	dt_fixed = .TRUE.
	1396	ENDIF
	1397
	1398	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1399	IF ( cfl_factor == -1.0 ) THEN
[1001]	1400	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1401	cfl_factor = 0.8
[1001]	1402	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1403	cfl_factor = 0.9
[1]	1404	ELSE
[1001]	1405	cfl_factor = 0.9
[1]	1406	ENDIF
	1407	ELSE
[215]	1408	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1409	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1410	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1411	ENDIF
	1412	ENDIF
	1413
	1414	!
	1415	!-- Store simulated time at begin
	1416	simulated_time_at_begin = simulated_time
	1417
	1418	!
[291]	1419	!-- Store reference time for coupled runs and change the coupling flag,
	1420	!-- if ...
	1421	IF ( simulated_time == 0.0 ) THEN
	1422	IF ( coupling_start_time == 0.0 ) THEN
	1423	time_since_reference_point = 0.0
	1424	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1425	run_coupled = .FALSE.
	1426	ENDIF
	1427	ENDIF
	1428
	1429	!
[1]	1430	!-- Set wind speed in the Galilei-transformed system
	1431	IF ( galilei_transformation ) THEN
[1053]	1432	IF ( use_ug_for_galilei_tr .AND. &
	1433	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1434	ug_vertical_gradient(1) == 0.0 .AND. &
	1435	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1436	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1437	u_gtrans = ug_surface * 0.6
	1438	v_gtrans = vg_surface * 0.6
[1053]	1439	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1440	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1441	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1442	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1443	' with galilei transformation'
[226]	1444	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1445	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1446	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1447	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1448	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1449	' with galilei transformation'
[226]	1450	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1451	ELSE
[215]	1452	message_string = 'variable translation speed used for galilei-' // &
	1453	'transformation, which may cause & instabilities in stably ' // &
	1454	'stratified regions'
[226]	1455	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1456	ENDIF
	1457	ENDIF
	1458
	1459	!
	1460	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1461	!-- fluxes have to be used in the diffusion-terms
	1462	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1463
	1464	!
	1465	!-- Check boundary conditions and set internal variables:
	1466	!-- Lateral boundary conditions
[73]	1467	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[1159]	1468	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1469	message_string = 'unknown boundary condition: bc_lr = "' // &
	1470	TRIM( bc_lr ) // '"'
[226]	1471	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1472	ENDIF
[73]	1473	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[1159]	1474	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1475	message_string = 'unknown boundary condition: bc_ns = "' // &
	1476	TRIM( bc_ns ) // '"'
[226]	1477	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1478	ENDIF
	1479
	1480	!
[366]	1481	!-- Internal variables used for speed optimization in if clauses
[707]	1482	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1483	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1484	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1485	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1486	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1487	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1488
	1489	!
[1]	1490	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1491	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1492	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1493	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1494	IF ( psolver /= 'multigrid' ) THEN
[215]	1495	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1496	'psolver = "' // TRIM( psolver ) // '"'
[226]	1497	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1498	ENDIF
[667]	1499	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1500	momentum_advec /= 'ws-scheme') THEN
[215]	1501	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1502	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1503	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1504	ENDIF
[667]	1505	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1506	scalar_advec /= 'ws-scheme' ) THEN
[215]	1507	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1508	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1509	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1510	ENDIF
	1511	IF ( galilei_transformation ) THEN
[215]	1512	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1513	'galilei_transformation = .T.'
[226]	1514	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1515	ENDIF
	1516	ENDIF
	1517
	1518	!
	1519	!-- Bottom boundary condition for the turbulent Kinetic energy
	1520	IF ( bc_e_b == 'neumann' ) THEN
	1521	ibc_e_b = 1
	1522	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1523	ibc_e_b = 2
[1015]	1524	IF ( prandtl_layer ) THEN
	1525	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1526	TRIM( bc_e_b ) // '"'
[226]	1527	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1528	ENDIF
	1529	IF ( .NOT. prandtl_layer ) THEN
	1530	bc_e_b = 'neumann'
	1531	ibc_e_b = 1
[215]	1532	message_string = 'boundary condition bc_e_b changed to "' // &
	1533	TRIM( bc_e_b ) // '"'
[226]	1534	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1535	ENDIF
	1536	ELSE
[215]	1537	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1538	TRIM( bc_e_b ) // '"'
[226]	1539	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1540	ENDIF
	1541
	1542	!
	1543	!-- Boundary conditions for perturbation pressure
	1544	IF ( bc_p_b == 'dirichlet' ) THEN
	1545	ibc_p_b = 0
	1546	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1547	ibc_p_b = 1
	1548	ELSE
[215]	1549	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1550	TRIM( bc_p_b ) // '"'
[226]	1551	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1552	ENDIF
[1111]	1553
[1]	1554	IF ( bc_p_t == 'dirichlet' ) THEN
	1555	ibc_p_t = 0
	1556	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1557	ibc_p_t = 1
	1558	ELSE
[215]	1559	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1560	TRIM( bc_p_t ) // '"'
[226]	1561	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1562	ENDIF
	1563
	1564	!
	1565	!-- Boundary conditions for potential temperature
[102]	1566	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1567	ibc_pt_b = 2
[1]	1568	ELSE
[102]	1569	IF ( bc_pt_b == 'dirichlet' ) THEN
	1570	ibc_pt_b = 0
	1571	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1572	ibc_pt_b = 1
	1573	ELSE
[215]	1574	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1575	TRIM( bc_pt_b ) // '"'
[226]	1576	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1577	ENDIF
	1578	ENDIF
[102]	1579
[1]	1580	IF ( bc_pt_t == 'dirichlet' ) THEN
	1581	ibc_pt_t = 0
	1582	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1583	ibc_pt_t = 1
[19]	1584	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1585	ibc_pt_t = 2
[1]	1586	ELSE
[215]	1587	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1588	TRIM( bc_pt_t ) // '"'
[226]	1589	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1590	ENDIF
	1591
[20]	1592	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1593	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1594
	1595	IF ( neutral ) THEN
	1596
	1597	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1598	THEN
	1599	message_string = 'heatflux must not be set for pure neutral flow'
	1600	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1601	ENDIF
	1602
	1603	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1604	THEN
	1605	message_string = 'heatflux must not be set for pure neutral flow'
	1606	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1607	ENDIF
	1608
	1609	ENDIF
	1610
[103]	1611	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1612	top_momentumflux_v /= 9999999.9 ) THEN
	1613	constant_top_momentumflux = .TRUE.
	1614	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1615	top_momentumflux_v == 9999999.9 ) ) THEN
	1616	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1617	'must be set'
[226]	1618	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1619	ENDIF
[1]	1620
	1621	!
	1622	!-- A given surface temperature implies Dirichlet boundary condition for
	1623	!-- temperature. In this case specification of a constant heat flux is
	1624	!-- forbidden.
	1625	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1626	surface_heatflux /= 0.0 ) THEN
[215]	1627	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1628	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1629	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1630	ENDIF
	1631	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1632	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1633	'wed with pt_surface_initial_change (/=0) = ', &
	1634	pt_surface_initial_change
[226]	1635	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1636	ENDIF
	1637
	1638	!
[19]	1639	!-- A given temperature at the top implies Dirichlet boundary condition for
	1640	!-- temperature. In this case specification of a constant heat flux is
	1641	!-- forbidden.
	1642	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1643	top_heatflux /= 0.0 ) THEN
[215]	1644	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1645	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1646	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1647	ENDIF
	1648
	1649	!
[95]	1650	!-- Boundary conditions for salinity
	1651	IF ( ocean ) THEN
	1652	IF ( bc_sa_t == 'dirichlet' ) THEN
	1653	ibc_sa_t = 0
	1654	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1655	ibc_sa_t = 1
	1656	ELSE
[215]	1657	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1658	TRIM( bc_sa_t ) // '"'
[226]	1659	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1660	ENDIF
	1661
	1662	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1663	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1664	message_string = 'boundary condition: bc_sa_t = "' // &
	1665	TRIM( bc_sa_t ) // '" requires to set ' // &
	1666	'top_salinityflux'
[226]	1667	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1668	ENDIF
[95]	1669
	1670	!
	1671	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1672	!-- salinity. In this case specification of a constant salinity flux is
	1673	!-- forbidden.
	1674	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1675	top_salinityflux /= 0.0 ) THEN
[215]	1676	message_string = 'boundary condition: bc_sa_t = "' // &
	1677	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1678	'constant_top_salinityflux = .TRUE.'
[226]	1679	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1680	ENDIF
	1681
	1682	ENDIF
	1683
	1684	!
[75]	1685	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1686	!-- water content / scalar
[75]	1687	IF ( humidity .OR. passive_scalar ) THEN
	1688	IF ( humidity ) THEN
[1]	1689	sq = 'q'
	1690	ELSE
	1691	sq = 's'
	1692	ENDIF
	1693	IF ( bc_q_b == 'dirichlet' ) THEN
	1694	ibc_q_b = 0
	1695	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1696	ibc_q_b = 1
	1697	ELSE
[215]	1698	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1699	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1700	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1701	ENDIF
	1702	IF ( bc_q_t == 'dirichlet' ) THEN
	1703	ibc_q_t = 0
	1704	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1705	ibc_q_t = 1
	1706	ELSE
[215]	1707	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1708	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1709	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1710	ENDIF
	1711
[600]	1712	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1713
	1714	!
	1715	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1716	!-- humidity. In this case specification of a constant water flux is
[1]	1717	!-- forbidden.
	1718	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1719	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1720	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1721	'th prescribed surface flux'
[226]	1722	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1723	ENDIF
	1724	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1725	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1726	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1727	q_surface_initial_change
[226]	1728	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1729	ENDIF
[1053]	1730
[1]	1731	ENDIF
	1732	!
	1733	!-- Boundary conditions for horizontal components of wind speed
	1734	IF ( bc_uv_b == 'dirichlet' ) THEN
	1735	ibc_uv_b = 0
	1736	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1737	ibc_uv_b = 1
	1738	IF ( prandtl_layer ) THEN
[215]	1739	message_string = 'boundary condition: bc_uv_b = "' // &
	1740	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1741	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1742	ENDIF
	1743	ELSE
[215]	1744	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1745	TRIM( bc_uv_b ) // '"'
[226]	1746	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1747	ENDIF
[667]	1748	!
	1749	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1750	!-- assigned with the u and v values of the ocean surface
	1751	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1752	ibc_uv_b = 2
	1753	ENDIF
[215]	1754
[108]	1755	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1756	bc_uv_t = 'neumann'
[1]	1757	ibc_uv_t = 1
	1758	ELSE
[132]	1759	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1760	ibc_uv_t = 0
[767]	1761	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1762	!
	1763	!-- Velocities for the initial u,v-profiles are set zero at the top
	1764	!-- in case of dirichlet_0 conditions
	1765	u_init(nzt+1) = 0.0
	1766	v_init(nzt+1) = 0.0
	1767	ENDIF
[108]	1768	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1769	ibc_uv_t = 1
	1770	ELSE
[215]	1771	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1772	TRIM( bc_uv_t ) // '"'
[226]	1773	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1774	ENDIF
	1775	ENDIF
	1776
	1777	!
	1778	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1779	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1780	rayleigh_damping_factor = 0.0
[1]	1781	ELSE
	1782	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1783	THEN
[215]	1784	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1785	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1786	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1787	ENDIF
	1788	ENDIF
	1789
	1790	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1791	IF ( .NOT. ocean ) THEN
	1792	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1793	ELSE
	1794	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1795	ENDIF
[1]	1796	ELSE
[108]	1797	IF ( .NOT. ocean ) THEN
	1798	IF ( rayleigh_damping_height < 0.0 .OR. &
	1799	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1800	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1801	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1802	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1803	ENDIF
[108]	1804	ELSE
	1805	IF ( rayleigh_damping_height > 0.0 .OR. &
	1806	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1807	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1808	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1809	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1810	ENDIF
[1]	1811	ENDIF
	1812	ENDIF
	1813
	1814	!
	1815	!-- Check number of chosen statistic regions. More than 10 regions are not
	1816	!-- allowed, because so far no more than 10 corresponding output files can
	1817	!-- be opened (cf. check_open)
	1818	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1819	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1820	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1821	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1822	ENDIF
	1823	IF ( normalizing_region > statistic_regions .OR. &
	1824	normalizing_region < 0) THEN
[215]	1825	WRITE ( message_string, * ) 'normalizing_region = ', &
	1826	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1827	' (value of statistic_regions)'
[226]	1828	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1829	ENDIF
	1830
	1831	!
[116]	1832	!-- Check the interval for sorting particles.
	1833	!-- Using particles as cloud droplets requires sorting after each timestep.
	1834	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1835	dt_sort_particles = 0.0
[215]	1836	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1837	'_droplets = .TRUE.'
[226]	1838	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1839	ENDIF
	1840
	1841	!
[1]	1842	!-- Set the default intervals for data output, if necessary
	1843	!-- NOTE: dt_dosp has already been set in package_parin
	1844	IF ( dt_data_output /= 9999999.9 ) THEN
	1845	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1846	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1847	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1848	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1849	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1850	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1851	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1852	DO mid = 1, max_masks
[410]	1853	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1854	ENDDO
[1]	1855	ENDIF
	1856
	1857	!
	1858	!-- Set the default skip time intervals for data output, if necessary
	1859	IF ( skip_time_dopr == 9999999.9 ) &
	1860	skip_time_dopr = skip_time_data_output
	1861	IF ( skip_time_dosp == 9999999.9 ) &
	1862	skip_time_dosp = skip_time_data_output
	1863	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1864	skip_time_do2d_xy = skip_time_data_output
	1865	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1866	skip_time_do2d_xz = skip_time_data_output
	1867	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1868	skip_time_do2d_yz = skip_time_data_output
	1869	IF ( skip_time_do3d == 9999999.9 ) &
	1870	skip_time_do3d = skip_time_data_output
	1871	IF ( skip_time_data_output_av == 9999999.9 ) &
	1872	skip_time_data_output_av = skip_time_data_output
[564]	1873	DO mid = 1, max_masks
[410]	1874	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1875	skip_time_domask(mid) = skip_time_data_output
	1876	ENDDO
[1]	1877
	1878	!
	1879	!-- Check the average intervals (first for 3d-data, then for profiles and
	1880	!-- spectra)
	1881	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1882	WRITE( message_string, * ) 'averaging_interval = ', &
	1883	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1884	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1885	ENDIF
	1886
	1887	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1888	averaging_interval_pr = averaging_interval
	1889	ENDIF
	1890
	1891	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1892	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1893	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1894	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1895	ENDIF
	1896
	1897	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1898	averaging_interval_sp = averaging_interval
	1899	ENDIF
	1900
	1901	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1902	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1903	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1904	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1905	ENDIF
	1906
	1907	!
	1908	!-- Set the default interval for profiles entering the temporal average
	1909	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1910	dt_averaging_input_pr = dt_averaging_input
	1911	ENDIF
	1912
	1913	!
	1914	!-- Set the default interval for the output of timeseries to a reasonable
	1915	!-- value (tries to minimize the number of calls of flow_statistics)
	1916	IF ( dt_dots == 9999999.9 ) THEN
	1917	IF ( averaging_interval_pr == 0.0 ) THEN
	1918	dt_dots = MIN( dt_run_control, dt_dopr )
	1919	ELSE
	1920	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1921	ENDIF
	1922	ENDIF
	1923
	1924	!
	1925	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1926	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1927	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1928	dt_averaging_input, ' must be <= averaging_interval = ', &
	1929	averaging_interval
[226]	1930	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1931	ENDIF
	1932
	1933	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1934	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1935	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1936	averaging_interval_pr
[226]	1937	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1938	ENDIF
	1939
	1940	!
[72]	1941	!-- Set the default value for the integration interval of precipitation amount
	1942	IF ( precipitation ) THEN
	1943	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1944	precipitation_amount_interval = dt_do2d_xy
	1945	ELSE
	1946	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1947	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1948	precipitation_amount_interval, ' must not be larger than ', &
	1949	'dt_do2d_xy = ', dt_do2d_xy
[226]	1950	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1951	ENDIF
	1952	ENDIF
	1953	ENDIF
	1954
	1955	!
[1]	1956	!-- Determine the number of output profiles and check whether they are
	1957	!-- permissible
	1958	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1959
	1960	dopr_n = dopr_n + 1
	1961	i = dopr_n
	1962
	1963	!
	1964	!-- Determine internal profile number (for hom, homs)
	1965	!-- and store height levels
	1966	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1967
	1968	CASE ( 'u', '#u' )
	1969	dopr_index(i) = 1
[87]	1970	dopr_unit(i) = 'm/s'
[1]	1971	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1972	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1973	dopr_initial_index(i) = 5
	1974	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1975	data_output_pr(i) = data_output_pr(i)(2:)
	1976	ENDIF
	1977
	1978	CASE ( 'v', '#v' )
	1979	dopr_index(i) = 2
[87]	1980	dopr_unit(i) = 'm/s'
	1981	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1982	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1983	dopr_initial_index(i) = 6
	1984	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1985	data_output_pr(i) = data_output_pr(i)(2:)
	1986	ENDIF
	1987
	1988	CASE ( 'w' )
	1989	dopr_index(i) = 3
[87]	1990	dopr_unit(i) = 'm/s'
	1991	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1992
	1993	CASE ( 'pt', '#pt' )
	1994	IF ( .NOT. cloud_physics ) THEN
	1995	dopr_index(i) = 4
[87]	1996	dopr_unit(i) = 'K'
[1]	1997	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1998	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1999	dopr_initial_index(i) = 7
	2000	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2001	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	2002	data_output_pr(i) = data_output_pr(i)(2:)
	2003	ENDIF
	2004	ELSE
	2005	dopr_index(i) = 43
[87]	2006	dopr_unit(i) = 'K'
[1]	2007	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	2008	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2009	dopr_initial_index(i) = 28
	2010	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2011	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	2012	data_output_pr(i) = data_output_pr(i)(2:)
	2013	ENDIF
	2014	ENDIF
	2015
	2016	CASE ( 'e' )
	2017	dopr_index(i) = 8
[87]	2018	dopr_unit(i) = 'm2/s2'
[1]	2019	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	2020	hom(nzb,2,8,:) = 0.0
	2021
	2022	CASE ( 'km', '#km' )
	2023	dopr_index(i) = 9
[87]	2024	dopr_unit(i) = 'm2/s'
[1]	2025	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2026	hom(nzb,2,9,:) = 0.0
	2027	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2028	dopr_initial_index(i) = 23
	2029	hom(:,2,23,:) = hom(:,2,9,:)
	2030	data_output_pr(i) = data_output_pr(i)(2:)
	2031	ENDIF
	2032
	2033	CASE ( 'kh', '#kh' )
	2034	dopr_index(i) = 10
[87]	2035	dopr_unit(i) = 'm2/s'
[1]	2036	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2037	hom(nzb,2,10,:) = 0.0
	2038	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2039	dopr_initial_index(i) = 24
	2040	hom(:,2,24,:) = hom(:,2,10,:)
	2041	data_output_pr(i) = data_output_pr(i)(2:)
	2042	ENDIF
	2043
	2044	CASE ( 'l', '#l' )
	2045	dopr_index(i) = 11
[87]	2046	dopr_unit(i) = 'm'
[1]	2047	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2048	hom(nzb,2,11,:) = 0.0
	2049	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2050	dopr_initial_index(i) = 25
	2051	hom(:,2,25,:) = hom(:,2,11,:)
	2052	data_output_pr(i) = data_output_pr(i)(2:)
	2053	ENDIF
	2054
	2055	CASE ( 'w"u"' )
	2056	dopr_index(i) = 12
[87]	2057	dopr_unit(i) = 'm2/s2'
[1]	2058	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2059	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2060
	2061	CASE ( 'wu' )
	2062	dopr_index(i) = 13
[87]	2063	dopr_unit(i) = 'm2/s2'
[1]	2064	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2065
	2066	CASE ( 'w"v"' )
	2067	dopr_index(i) = 14
[87]	2068	dopr_unit(i) = 'm2/s2'
[1]	2069	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2070	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2071
	2072	CASE ( 'wv' )
	2073	dopr_index(i) = 15
[87]	2074	dopr_unit(i) = 'm2/s2'
[1]	2075	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2076
	2077	CASE ( 'w"pt"' )
	2078	dopr_index(i) = 16
[87]	2079	dopr_unit(i) = 'K m/s'
[1]	2080	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2081
	2082	CASE ( 'wpt' )
	2083	dopr_index(i) = 17
[87]	2084	dopr_unit(i) = 'K m/s'
[1]	2085	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2086
	2087	CASE ( 'wpt' )
	2088	dopr_index(i) = 18
[87]	2089	dopr_unit(i) = 'K m/s'
[1]	2090	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2091
	2092	CASE ( 'wu' )
	2093	dopr_index(i) = 19
[87]	2094	dopr_unit(i) = 'm2/s2'
[1]	2095	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2096	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2097
	2098	CASE ( 'wv' )
	2099	dopr_index(i) = 20
[87]	2100	dopr_unit(i) = 'm2/s2'
[1]	2101	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2102	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2103
	2104	CASE ( 'wptBC' )
	2105	dopr_index(i) = 21
[87]	2106	dopr_unit(i) = 'K m/s'
[1]	2107	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2108
	2109	CASE ( 'wptBC' )
	2110	dopr_index(i) = 22
[87]	2111	dopr_unit(i) = 'K m/s'
[1]	2112	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2113
[96]	2114	CASE ( 'sa', '#sa' )
	2115	IF ( .NOT. ocean ) THEN
[215]	2116	message_string = 'data_output_pr = ' // &
	2117	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2118	'lemented for ocean = .FALSE.'
[226]	2119	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2120	ELSE
	2121	dopr_index(i) = 23
	2122	dopr_unit(i) = 'psu'
	2123	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2124	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2125	dopr_initial_index(i) = 26
	2126	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2127	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2128	data_output_pr(i) = data_output_pr(i)(2:)
	2129	ENDIF
	2130	ENDIF
	2131
[1]	2132	CASE ( 'u*2' )
	2133	dopr_index(i) = 30
[87]	2134	dopr_unit(i) = 'm2/s2'
[1]	2135	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2136
	2137	CASE ( 'v*2' )
	2138	dopr_index(i) = 31
[87]	2139	dopr_unit(i) = 'm2/s2'
[1]	2140	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2141
	2142	CASE ( 'w*2' )
	2143	dopr_index(i) = 32
[87]	2144	dopr_unit(i) = 'm2/s2'
[1]	2145	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2146
	2147	CASE ( 'pt*2' )
	2148	dopr_index(i) = 33
[87]	2149	dopr_unit(i) = 'K2'
[1]	2150	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2151
	2152	CASE ( 'e*' )
	2153	dopr_index(i) = 34
[87]	2154	dopr_unit(i) = 'm2/s2'
[1]	2155	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2156
	2157	CASE ( 'w2pt' )
	2158	dopr_index(i) = 35
[87]	2159	dopr_unit(i) = 'K m2/s2'
[1]	2160	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2161
	2162	CASE ( 'wpt2' )
	2163	dopr_index(i) = 36
[87]	2164	dopr_unit(i) = 'K2 m/s'
[1]	2165	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2166
	2167	CASE ( 'we' )
	2168	dopr_index(i) = 37
[87]	2169	dopr_unit(i) = 'm3/s3'
[1]	2170	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2171
	2172	CASE ( 'w*3' )
	2173	dopr_index(i) = 38
[87]	2174	dopr_unit(i) = 'm3/s3'
[1]	2175	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2176
	2177	CASE ( 'Sw' )
	2178	dopr_index(i) = 39
[89]	2179	dopr_unit(i) = 'none'
[1]	2180	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2181
[232]	2182	CASE ( 'p' )
	2183	dopr_index(i) = 40
	2184	dopr_unit(i) = 'Pa'
	2185	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2186
[1]	2187	CASE ( 'q', '#q' )
[108]	2188	IF ( .NOT. humidity ) THEN
[215]	2189	message_string = 'data_output_pr = ' // &
	2190	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2191	'lemented for humidity = .FALSE.'
[226]	2192	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2193	ELSE
	2194	dopr_index(i) = 41
[87]	2195	dopr_unit(i) = 'kg/kg'
	2196	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2197	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2198	dopr_initial_index(i) = 26
	2199	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2200	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2201	data_output_pr(i) = data_output_pr(i)(2:)
	2202	ENDIF
	2203	ENDIF
	2204
	2205	CASE ( 's', '#s' )
	2206	IF ( .NOT. passive_scalar ) THEN
[215]	2207	message_string = 'data_output_pr = ' // &
	2208	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2209	'lemented for passive_scalar = .FALSE.'
[226]	2210	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2211	ELSE
	2212	dopr_index(i) = 41
[87]	2213	dopr_unit(i) = 'kg/m3'
	2214	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2215	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2216	dopr_initial_index(i) = 26
	2217	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2218	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2219	data_output_pr(i) = data_output_pr(i)(2:)
	2220	ENDIF
	2221	ENDIF
	2222
	2223	CASE ( 'qv', '#qv' )
	2224	IF ( .NOT. cloud_physics ) THEN
	2225	dopr_index(i) = 41
[87]	2226	dopr_unit(i) = 'kg/kg'
	2227	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2228	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2229	dopr_initial_index(i) = 26
	2230	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2231	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2232	data_output_pr(i) = data_output_pr(i)(2:)
	2233	ENDIF
	2234	ELSE
	2235	dopr_index(i) = 42
[87]	2236	dopr_unit(i) = 'kg/kg'
	2237	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2238	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2239	dopr_initial_index(i) = 27
	2240	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2241	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2242	data_output_pr(i) = data_output_pr(i)(2:)
	2243	ENDIF
	2244	ENDIF
	2245
	2246	CASE ( 'lpt', '#lpt' )
	2247	IF ( .NOT. cloud_physics ) THEN
[215]	2248	message_string = 'data_output_pr = ' // &
	2249	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2250	'lemented for cloud_physics = .FALSE.'
[226]	2251	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2252	ELSE
	2253	dopr_index(i) = 4
[87]	2254	dopr_unit(i) = 'K'
[1]	2255	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2256	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2257	dopr_initial_index(i) = 7
	2258	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2259	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2260	data_output_pr(i) = data_output_pr(i)(2:)
	2261	ENDIF
	2262	ENDIF
	2263
	2264	CASE ( 'vpt', '#vpt' )
	2265	dopr_index(i) = 44
[87]	2266	dopr_unit(i) = 'K'
	2267	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2268	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2269	dopr_initial_index(i) = 29
	2270	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2271	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2272	data_output_pr(i) = data_output_pr(i)(2:)
	2273	ENDIF
	2274
	2275	CASE ( 'w"vpt"' )
	2276	dopr_index(i) = 45
[87]	2277	dopr_unit(i) = 'K m/s'
[1]	2278	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2279
	2280	CASE ( 'wvpt' )
	2281	dopr_index(i) = 46
[87]	2282	dopr_unit(i) = 'K m/s'
[1]	2283	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2284
	2285	CASE ( 'wvpt' )
	2286	dopr_index(i) = 47
[87]	2287	dopr_unit(i) = 'K m/s'
[1]	2288	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2289
	2290	CASE ( 'w"q"' )
[108]	2291	IF ( .NOT. humidity ) THEN
[215]	2292	message_string = 'data_output_pr = ' // &
	2293	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2294	'lemented for humidity = .FALSE.'
[226]	2295	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2296	ELSE
	2297	dopr_index(i) = 48
[87]	2298	dopr_unit(i) = 'kg/kg m/s'
[1]	2299	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2300	ENDIF
	2301
	2302	CASE ( 'wq' )
[108]	2303	IF ( .NOT. humidity ) THEN
[215]	2304	message_string = 'data_output_pr = ' // &
	2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2306	'lemented for humidity = .FALSE.'
[226]	2307	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2308	ELSE
	2309	dopr_index(i) = 49
[87]	2310	dopr_unit(i) = 'kg/kg m/s'
[1]	2311	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2312	ENDIF
	2313
	2314	CASE ( 'wq' )
[108]	2315	IF ( .NOT. humidity ) THEN
[215]	2316	message_string = 'data_output_pr = ' // &
	2317	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2318	'lemented for humidity = .FALSE.'
[226]	2319	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2320	ELSE
	2321	dopr_index(i) = 50
[87]	2322	dopr_unit(i) = 'kg/kg m/s'
[1]	2323	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2324	ENDIF
	2325
	2326	CASE ( 'w"s"' )
	2327	IF ( .NOT. passive_scalar ) THEN
[215]	2328	message_string = 'data_output_pr = ' // &
	2329	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2330	'lemented for passive_scalar = .FALSE.'
[226]	2331	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2332	ELSE
	2333	dopr_index(i) = 48
[87]	2334	dopr_unit(i) = 'kg/m3 m/s'
[1]	2335	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2336	ENDIF
	2337
	2338	CASE ( 'ws' )
	2339	IF ( .NOT. passive_scalar ) THEN
[215]	2340	message_string = 'data_output_pr = ' // &
	2341	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2342	'lemented for passive_scalar = .FALSE.'
[226]	2343	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2344	ELSE
	2345	dopr_index(i) = 49
[87]	2346	dopr_unit(i) = 'kg/m3 m/s'
[1]	2347	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2348	ENDIF
	2349
	2350	CASE ( 'ws' )
	2351	IF ( .NOT. passive_scalar ) THEN
[215]	2352	message_string = 'data_output_pr = ' // &
	2353	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2354	'lemented for passive_scalar = .FALSE.'
[226]	2355	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2356	ELSE
	2357	dopr_index(i) = 50
[87]	2358	dopr_unit(i) = 'kg/m3 m/s'
[1]	2359	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2360	ENDIF
	2361
	2362	CASE ( 'w"qv"' )
[75]	2363	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2364	THEN
	2365	dopr_index(i) = 48
[87]	2366	dopr_unit(i) = 'kg/kg m/s'
[1]	2367	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2368	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2369	dopr_index(i) = 51
[87]	2370	dopr_unit(i) = 'kg/kg m/s'
[1]	2371	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2372	ELSE
[215]	2373	message_string = 'data_output_pr = ' // &
	2374	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2375	'lemented for cloud_physics = .FALSE. an&' // &
	2376	'd humidity = .FALSE.'
[226]	2377	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2378	ENDIF
	2379
	2380	CASE ( 'wqv' )
[75]	2381	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2382	THEN
	2383	dopr_index(i) = 49
[87]	2384	dopr_unit(i) = 'kg/kg m/s'
[1]	2385	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2386	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2387	dopr_index(i) = 52
[87]	2388	dopr_unit(i) = 'kg/kg m/s'
[1]	2389	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2390	ELSE
[215]	2391	message_string = 'data_output_pr = ' // &
	2392	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2393	'lemented for cloud_physics = .FALSE. an&' // &
	2394	'd humidity = .FALSE.'
[226]	2395	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2396	ENDIF
	2397
	2398	CASE ( 'wqv' )
[75]	2399	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2400	THEN
	2401	dopr_index(i) = 50
[87]	2402	dopr_unit(i) = 'kg/kg m/s'
[1]	2403	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2404	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2405	dopr_index(i) = 53
[87]	2406	dopr_unit(i) = 'kg/kg m/s'
[1]	2407	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2408	ELSE
[215]	2409	message_string = 'data_output_pr = ' // &
	2410	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2411	'lemented for cloud_physics = .FALSE. an&' // &
	2412	'd humidity = .FALSE.'
[226]	2413	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2414	ENDIF
	2415
	2416	CASE ( 'ql' )
	2417	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2418	message_string = 'data_output_pr = ' // &
	2419	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2420	'lemented for cloud_physics = .FALSE. or' // &
	2421	'&cloud_droplets = .FALSE.'
[226]	2422	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2423	ELSE
	2424	dopr_index(i) = 54
[87]	2425	dopr_unit(i) = 'kg/kg'
[1]	2426	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2427	ENDIF
	2428
[524]	2429	CASE ( 'wuu*:dz' )
[1]	2430	dopr_index(i) = 55
[87]	2431	dopr_unit(i) = 'm2/s3'
[1]	2432	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2433
[524]	2434	CASE ( 'wp:dz' )
[1]	2435	dopr_index(i) = 56
[87]	2436	dopr_unit(i) = 'm2/s3'
[106]	2437	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2438
[524]	2439	CASE ( 'w"e:dz' )
[1]	2440	dopr_index(i) = 57
[87]	2441	dopr_unit(i) = 'm2/s3'
[1]	2442	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2443
[667]	2444
[1]	2445	CASE ( 'u"pt"' )
	2446	dopr_index(i) = 58
[87]	2447	dopr_unit(i) = 'K m/s'
[1]	2448	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2449
	2450	CASE ( 'upt' )
	2451	dopr_index(i) = 59
[87]	2452	dopr_unit(i) = 'K m/s'
[1]	2453	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2454
	2455	CASE ( 'upt_t' )
	2456	dopr_index(i) = 60
[87]	2457	dopr_unit(i) = 'K m/s'
[1]	2458	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2459
	2460	CASE ( 'v"pt"' )
	2461	dopr_index(i) = 61
[87]	2462	dopr_unit(i) = 'K m/s'
[1]	2463	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2464
	2465	CASE ( 'vpt' )
	2466	dopr_index(i) = 62
[87]	2467	dopr_unit(i) = 'K m/s'
[1]	2468	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2469
	2470	CASE ( 'vpt_t' )
	2471	dopr_index(i) = 63
[87]	2472	dopr_unit(i) = 'K m/s'
[1]	2473	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2474
[96]	2475	CASE ( 'rho' )
[388]	2476	IF ( .NOT. ocean ) THEN
	2477	message_string = 'data_output_pr = ' // &
	2478	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2479	'lemented for ocean = .FALSE.'
	2480	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2481	ELSE
	2482	dopr_index(i) = 64
	2483	dopr_unit(i) = 'kg/m3'
	2484	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1179]	2485	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2486	dopr_initial_index(i) = 77
	2487	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
	2488	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
	2489	data_output_pr(i) = data_output_pr(i)(2:)
	2490	ENDIF
[388]	2491	ENDIF
[1]	2492
[96]	2493	CASE ( 'w"sa"' )
	2494	IF ( .NOT. ocean ) THEN
[215]	2495	message_string = 'data_output_pr = ' // &
	2496	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2497	'lemented for ocean = .FALSE.'
[226]	2498	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2499	ELSE
	2500	dopr_index(i) = 65
	2501	dopr_unit(i) = 'psu m/s'
	2502	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2503	ENDIF
	2504
	2505	CASE ( 'wsa' )
	2506	IF ( .NOT. ocean ) THEN
[215]	2507	message_string = 'data_output_pr = ' // &
	2508	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2509	'lemented for ocean = .FALSE.'
[226]	2510	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2511	ELSE
	2512	dopr_index(i) = 66
	2513	dopr_unit(i) = 'psu m/s'
	2514	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2515	ENDIF
	2516
	2517	CASE ( 'wsa' )
	2518	IF ( .NOT. ocean ) THEN
[215]	2519	message_string = 'data_output_pr = ' // &
	2520	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2521	'lemented for ocean = .FALSE.'
[226]	2522	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2523	ELSE
	2524	dopr_index(i) = 67
	2525	dopr_unit(i) = 'psu m/s'
	2526	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2527	ENDIF
	2528
[106]	2529	CASE ( 'wp' )
	2530	dopr_index(i) = 68
	2531	dopr_unit(i) = 'm3/s3'
	2532	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2533
[106]	2534	CASE ( 'w"e' )
	2535	dopr_index(i) = 69
	2536	dopr_unit(i) = 'm3/s3'
	2537	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2538
[197]	2539	CASE ( 'q*2' )
	2540	IF ( .NOT. humidity ) THEN
[215]	2541	message_string = 'data_output_pr = ' // &
	2542	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2543	'lemented for humidity = .FALSE.'
[226]	2544	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2545	ELSE
	2546	dopr_index(i) = 70
	2547	dopr_unit(i) = 'kg2/kg2'
	2548	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2549	ENDIF
[106]	2550
[388]	2551	CASE ( 'prho' )
	2552	IF ( .NOT. ocean ) THEN
	2553	message_string = 'data_output_pr = ' // &
	2554	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2555	'lemented for ocean = .FALSE.'
	2556	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2557	ELSE
	2558	dopr_index(i) = 71
	2559	dopr_unit(i) = 'kg/m3'
	2560	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2561	ENDIF
	2562
	2563	CASE ( 'hyp' )
	2564	dopr_index(i) = 72
[531]	2565	dopr_unit(i) = 'dbar'
[388]	2566	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2567
[1053]	2568	CASE ( 'nr' )
	2569	IF ( .NOT. cloud_physics ) THEN
	2570	message_string = 'data_output_pr = ' // &
	2571	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2572	'lemented for cloud_physics = .FALSE.'
	2573	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2574	ELSEIF ( icloud_scheme /= 0 ) THEN
	2575	message_string = 'data_output_pr = ' // &
	2576	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2577	'lemented for cloud_scheme /= seifert_beheng'
	2578	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2579	ELSEIF ( .NOT. precipitation ) THEN
	2580	message_string = 'data_output_pr = ' // &
	2581	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2582	'lemented for precipitation = .FALSE.'
	2583	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2584	ELSE
	2585	dopr_index(i) = 73
	2586	dopr_unit(i) = '1/m3'
	2587	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2588	ENDIF
	2589
	2590	CASE ( 'qr' )
	2591	IF ( .NOT. cloud_physics ) THEN
	2592	message_string = 'data_output_pr = ' // &
	2593	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2594	'lemented for cloud_physics = .FALSE.'
	2595	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2596	ELSEIF ( icloud_scheme /= 0 ) THEN
	2597	message_string = 'data_output_pr = ' // &
	2598	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2599	'lemented for cloud_scheme /= seifert_beheng'
	2600	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2601	ELSEIF ( .NOT. precipitation ) THEN
	2602	message_string = 'data_output_pr = ' // &
	2603	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2604	'lemented for precipitation = .FALSE.'
	2605	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2606	ELSE
	2607	dopr_index(i) = 74
	2608	dopr_unit(i) = 'kg/kg'
	2609	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2610	ENDIF
	2611
	2612	CASE ( 'qc' )
	2613	IF ( .NOT. cloud_physics ) THEN
	2614	message_string = 'data_output_pr = ' // &
	2615	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2616	'lemented for cloud_physics = .FALSE.'
	2617	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2618	ELSEIF ( icloud_scheme /= 0 ) THEN
	2619	message_string = 'data_output_pr = ' // &
	2620	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2621	'lemented for cloud_scheme /= seifert_beheng'
	2622	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2623	ELSE
	2624	dopr_index(i) = 75
	2625	dopr_unit(i) = 'kg/kg'
	2626	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2627	ENDIF
	2628
	2629	CASE ( 'prr' )
	2630	IF ( .NOT. cloud_physics ) THEN
	2631	message_string = 'data_output_pr = ' // &
	2632	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2633	'lemented for cloud_physics = .FALSE.'
	2634	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2635	ELSEIF ( icloud_scheme /= 0 ) THEN
	2636	message_string = 'data_output_pr = ' // &
	2637	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2638	'lemented for cloud_scheme /= seifert_beheng'
	2639	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2640	ELSEIF ( .NOT. precipitation ) THEN
	2641	message_string = 'data_output_pr = ' // &
	2642	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2643	'lemented for precipitation = .FALSE.'
	2644	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2645
	2646	ELSE
	2647	dopr_index(i) = 76
	2648	dopr_unit(i) = 'kg/kg m/s'
	2649	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2650	ENDIF
	2651
[1]	2652	CASE DEFAULT
[87]	2653
	2654	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2655
	2656	IF ( unit == 'illegal' ) THEN
[215]	2657	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2658	message_string = 'illegal value for data_output_pr or ' // &
	2659	'data_output_pr_user = "' // &
	2660	TRIM( data_output_pr(i) ) // '"'
[226]	2661	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2662	ELSE
	2663	message_string = 'illegal value for data_output_pr = "' // &
	2664	TRIM( data_output_pr(i) ) // '"'
[226]	2665	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2666	ENDIF
[1]	2667	ENDIF
	2668
	2669	END SELECT
[667]	2670
[1]	2671	ENDDO
	2672
	2673
	2674	!
	2675	!-- Append user-defined data output variables to the standard data output
	2676	IF ( data_output_user(1) /= ' ' ) THEN
	2677	i = 1
	2678	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2679	i = i + 1
	2680	ENDDO
	2681	j = 1
	2682	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2683	IF ( i > 100 ) THEN
[215]	2684	message_string = 'number of output quantitities given by data' // &
	2685	'_output and data_output_user exceeds the limit of 100'
[226]	2686	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2687	ENDIF
	2688	data_output(i) = data_output_user(j)
	2689	i = i + 1
	2690	j = j + 1
	2691	ENDDO
	2692	ENDIF
	2693
	2694	!
	2695	!-- Check and set steering parameters for 2d/3d data output and averaging
	2696	i = 1
	2697	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2698	!
	2699	!-- Check for data averaging
	2700	ilen = LEN_TRIM( data_output(i) )
	2701	j = 0 ! no data averaging
	2702	IF ( ilen > 3 ) THEN
	2703	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2704	j = 1 ! data averaging
	2705	data_output(i) = data_output(i)(1:ilen-3)
	2706	ENDIF
	2707	ENDIF
	2708	!
	2709	!-- Check for cross section or volume data
	2710	ilen = LEN_TRIM( data_output(i) )
	2711	k = 0 ! 3d data
	2712	var = data_output(i)(1:ilen)
	2713	IF ( ilen > 3 ) THEN
	2714	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2715	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2716	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2717	k = 1 ! 2d data
	2718	var = data_output(i)(1:ilen-3)
	2719	ENDIF
	2720	ENDIF
	2721	!
	2722	!-- Check for allowed value and set units
	2723	SELECT CASE ( TRIM( var ) )
	2724
	2725	CASE ( 'e' )
	2726	IF ( constant_diffusion ) THEN
[215]	2727	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2728	'res constant_diffusion = .FALSE.'
[226]	2729	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2730	ENDIF
	2731	unit = 'm2/s2'
	2732
[771]	2733	CASE ( 'lpt' )
	2734	IF ( .NOT. cloud_physics ) THEN
	2735	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2736	'res cloud_physics = .TRUE.'
	2737	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2738	ENDIF
	2739	unit = 'K'
	2740
[1053]	2741	CASE ( 'nr' )
	2742	IF ( .NOT. cloud_physics ) THEN
	2743	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2744	'res cloud_physics = .TRUE.'
	2745	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2746	ELSEIF ( icloud_scheme /= 0 ) THEN
	2747	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2748	'res cloud_scheme = seifert_beheng'
	2749	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2750	ENDIF
	2751	unit = '1/m3'
	2752
[1]	2753	CASE ( 'pc', 'pr' )
	2754	IF ( .NOT. particle_advection ) THEN
[215]	2755	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2756	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2757	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2758	ENDIF
	2759	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2760	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2761
[1053]	2762	CASE ( 'prr' )
	2763	IF ( .NOT. cloud_physics ) THEN
	2764	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2765	'res cloud_physics = .TRUE.'
	2766	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2767	ELSEIF ( icloud_scheme /= 0 ) THEN
	2768	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2769	'res cloud_scheme = seifert_beheng'
	2770	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2771	ELSEIF ( .NOT. precipitation ) THEN
	2772	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2773	'res precipitation = .TRUE.'
	2774	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2775	ENDIF
	2776	unit = 'kg/kg m/s'
	2777
[1]	2778	CASE ( 'q', 'vpt' )
[75]	2779	IF ( .NOT. humidity ) THEN
[215]	2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2781	'res humidity = .TRUE.'
[226]	2782	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2783	ENDIF
	2784	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2785	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2786
[1053]	2787	CASE ( 'qc' )
	2788	IF ( .NOT. cloud_physics ) THEN
	2789	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2790	'res cloud_physics = .TRUE.'
	2791	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2792	ELSEIF ( icloud_scheme /= 0 ) THEN
	2793	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2794	'res cloud_scheme = seifert_beheng'
	2795	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2796	ENDIF
	2797	unit = 'kg/kg'
	2798
[1]	2799	CASE ( 'ql' )
	2800	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2801	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2802	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2803	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2804	ENDIF
	2805	unit = 'kg/kg'
	2806
	2807	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2808	IF ( .NOT. cloud_droplets ) THEN
[215]	2809	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2810	'res cloud_droplets = .TRUE.'
[226]	2811	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2812	ENDIF
	2813	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2814	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2815	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2816
[1053]	2817	CASE ( 'qr' )
	2818	IF ( .NOT. cloud_physics ) THEN
	2819	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2820	'res cloud_physics = .TRUE.'
	2821	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2822	ELSEIF ( icloud_scheme /= 0 ) THEN
	2823	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2824	'res cloud_scheme = seifert_beheng'
	2825	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
[1115]	2826	ELSEIF ( .NOT. precipitation ) THEN
	2827	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2828	'res precipitation = .TRUE.'
	2829	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[1053]	2830	ENDIF
	2831	unit = 'kg/kg'
	2832
[1]	2833	CASE ( 'qv' )
	2834	IF ( .NOT. cloud_physics ) THEN
[215]	2835	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2836	'res cloud_physics = .TRUE.'
[226]	2837	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2838	ENDIF
	2839	unit = 'kg/kg'
	2840
[96]	2841	CASE ( 'rho' )
	2842	IF ( .NOT. ocean ) THEN
[215]	2843	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2844	'res ocean = .TRUE.'
[226]	2845	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2846	ENDIF
	2847	unit = 'kg/m3'
	2848
[1]	2849	CASE ( 's' )
	2850	IF ( .NOT. passive_scalar ) THEN
[215]	2851	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2852	'res passive_scalar = .TRUE.'
[226]	2853	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2854	ENDIF
	2855	unit = 'conc'
	2856
[96]	2857	CASE ( 'sa' )
	2858	IF ( .NOT. ocean ) THEN
[215]	2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2860	'res ocean = .TRUE.'
[226]	2861	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2862	ENDIF
	2863	unit = 'psu'
	2864
[978]	2865	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2866	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2867	message_string = 'illegal value for data_output: "' // &
	2868	TRIM( var ) // '" & only 2d-horizontal ' // &
	2869	'cross sections are allowed for this value'
[226]	2870	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2871	ENDIF
	2872	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2873	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2874	'res cloud_physics = .TRUE.'
[226]	2875	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2876	ENDIF
[72]	2877	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2878	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2879	'res precipitation = .TRUE.'
[226]	2880	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2881	ENDIF
	2882	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2883	message_string = 'temporal averaging of precipitation ' // &
	2884	'amount "' // TRIM( var ) // '" is not possible'
[226]	2885	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2886	ENDIF
	2887	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2888	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2889	'res precipitation = .TRUE.'
[226]	2890	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2891	ENDIF
[354]	2892	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2893	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2894	'res humidity = .TRUE.'
	2895	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2896	ENDIF
[72]	2897
[354]	2898	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2899	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2900	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2901	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2902	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2903	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2904	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2905	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2906	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2907
[1]	2908
	2909	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2910	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2911	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2912	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2913	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2914	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2915	CONTINUE
	2916
	2917	CASE DEFAULT
	2918	CALL user_check_data_output( var, unit )
	2919
	2920	IF ( unit == 'illegal' ) THEN
[215]	2921	IF ( data_output_user(1) /= ' ' ) THEN
	2922	message_string = 'illegal value for data_output or ' // &
	2923	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2924	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2925	ELSE
	2926	message_string = 'illegal value for data_output =' // &
	2927	TRIM( data_output(i) ) // '"'
[226]	2928	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2929	ENDIF
	2930	ENDIF
	2931
	2932	END SELECT
	2933	!
	2934	!-- Set the internal steering parameters appropriately
	2935	IF ( k == 0 ) THEN
	2936	do3d_no(j) = do3d_no(j) + 1
	2937	do3d(j,do3d_no(j)) = data_output(i)
	2938	do3d_unit(j,do3d_no(j)) = unit
	2939	ELSE
	2940	do2d_no(j) = do2d_no(j) + 1
	2941	do2d(j,do2d_no(j)) = data_output(i)
	2942	do2d_unit(j,do2d_no(j)) = unit
	2943	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2944	data_output_xy(j) = .TRUE.
	2945	ENDIF
	2946	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2947	data_output_xz(j) = .TRUE.
	2948	ENDIF
	2949	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2950	data_output_yz(j) = .TRUE.
	2951	ENDIF
	2952	ENDIF
	2953
	2954	IF ( j == 1 ) THEN
	2955	!
	2956	!-- Check, if variable is already subject to averaging
	2957	found = .FALSE.
	2958	DO k = 1, doav_n
	2959	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2960	ENDDO
	2961
	2962	IF ( .NOT. found ) THEN
	2963	doav_n = doav_n + 1
	2964	doav(doav_n) = var
	2965	ENDIF
	2966	ENDIF
	2967
	2968	i = i + 1
	2969	ENDDO
	2970
	2971	!
[376]	2972	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2973	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2974	WRITE( message_string, * ) 'output of averaged quantity "', &
	2975	TRIM( doav(1) ), '_av" requires to set a ', &
	2976	'non-zero & averaging interval'
	2977	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2978	ENDIF
	2979
	2980	!
[308]	2981	!-- Check sectional planes and store them in one shared array
	2982	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2983	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2984	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2985	ENDIF
	2986	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2987	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2988	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2989	ENDIF
	2990	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2991	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2992	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2993	ENDIF
[1]	2994	section(:,1) = section_xy
	2995	section(:,2) = section_xz
	2996	section(:,3) = section_yz
	2997
	2998	!
	2999	!-- Upper plot limit for 2D vertical sections
	3000	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	3001	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	3002	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	3003	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	3004	' (zu(nzt))'
[226]	3005	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	3006	ENDIF
	3007
	3008	!
	3009	!-- Upper plot limit for 3D arrays
	3010	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	3011
	3012	!
	3013	!-- Determine and check accuracy for compressed 3D plot output
	3014	IF ( do3d_compress ) THEN
	3015	!
	3016	!-- Compression only permissible on T3E machines
	3017	IF ( host(1:3) /= 't3e' ) THEN
[215]	3018	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	3019	TRIM( host ) // '"'
[226]	3020	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	3021	ENDIF
	3022
	3023	i = 1
	3024	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	3025
	3026	ilen = LEN_TRIM( do3d_comp_prec(i) )
	3027	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	3028	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3029	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3030	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3031	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3032	ENDIF
	3033
	3034	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3035	var = do3d_comp_prec(i)(1:ilen-1)
	3036
	3037	SELECT CASE ( var )
	3038
	3039	CASE ( 'u' )
	3040	j = 1
	3041	CASE ( 'v' )
	3042	j = 2
	3043	CASE ( 'w' )
	3044	j = 3
	3045	CASE ( 'p' )
	3046	j = 4
	3047	CASE ( 'pt' )
	3048	j = 5
	3049
	3050	CASE DEFAULT
[215]	3051	WRITE( message_string, * ) 'unknown variable "', &
	3052	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3053	i, ')'
[226]	3054	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3055
	3056	END SELECT
	3057
	3058	plot_3d_precision(j)%precision = prec
	3059	i = i + 1
	3060
	3061	ENDDO
	3062	ENDIF
	3063
	3064	!
	3065	!-- Check the data output format(s)
	3066	IF ( data_output_format(1) == ' ' ) THEN
	3067	!
	3068	!-- Default value
	3069	netcdf_output = .TRUE.
	3070	ELSE
	3071	i = 1
	3072	DO WHILE ( data_output_format(i) /= ' ' )
	3073
	3074	SELECT CASE ( data_output_format(i) )
	3075
	3076	CASE ( 'netcdf' )
	3077	netcdf_output = .TRUE.
	3078	CASE ( 'iso2d' )
	3079	iso2d_output = .TRUE.
	3080	CASE ( 'avs' )
	3081	avs_output = .TRUE.
	3082
	3083	CASE DEFAULT
[215]	3084	message_string = 'unknown value for data_output_format "' // &
	3085	TRIM( data_output_format(i) ) // '"'
[226]	3086	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3087
	3088	END SELECT
	3089
	3090	i = i + 1
	3091	IF ( i > 10 ) EXIT
	3092
	3093	ENDDO
[1031]	3094	ENDIF
[1]	3095
[1031]	3096	!
	3097	!-- Set output format string (used in header)
	3098	IF ( netcdf_output ) THEN
	3099
	3100	SELECT CASE ( netcdf_data_format )
	3101	CASE ( 1 )
	3102	output_format_netcdf = 'netCDF classic'
	3103	CASE ( 2 )
	3104	output_format_netcdf = 'netCDF 64bit offset'
	3105	CASE ( 3 )
	3106	output_format_netcdf = 'netCDF4/HDF5'
	3107	CASE ( 4 )
	3108	output_format_netcdf = 'netCDF4/HDF5 classic'
	3109	CASE ( 5 )
	3110	output_format_netcdf = 'parallel netCDF4/HDF5'
	3111	CASE ( 6 )
	3112	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3113
	3114	END SELECT
	3115
[1]	3116	ENDIF
	3117
	3118	!
[410]	3119	!-- Check mask conditions
[553]	3120	DO mid = 1, max_masks
[567]	3121	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3122	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3123	masks = masks + 1
	3124	ENDIF
	3125	ENDDO
	3126
[410]	3127	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3128	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3129	'<= ', max_masks, ' (=max_masks)'
[564]	3130	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3131	ENDIF
	3132	IF ( masks > 0 ) THEN
	3133	mask_scale(1) = mask_scale_x
	3134	mask_scale(2) = mask_scale_y
	3135	mask_scale(3) = mask_scale_z
	3136	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3137	WRITE( message_string, * ) &
	3138	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3139	'must be > 0.0'
[564]	3140	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3141	ENDIF
	3142	!
	3143	!-- Generate masks for masked data output
	3144	CALL init_masks
	3145	ENDIF
	3146
	3147	!
[493]	3148	!-- Check the NetCDF data format
[924]	3149	#if ! defined ( __check )
[1034]	3150	IF ( netcdf_data_format > 2 ) THEN
[924]	3151	#if defined( __netcdf4 )
[493]	3152	CONTINUE
	3153	#else
[1031]	3154	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3155	'cpp-directive __netcdf4 given & switch ' // &
	3156	'back to 64-bit offset format'
	3157	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3158	netcdf_data_format = 2
	3159	#endif
	3160	ENDIF
[1031]	3161	IF ( netcdf_data_format > 4 ) THEN
	3162	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3163	CONTINUE
	3164	#else
	3165	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3166	'cpp-directive __netcdf4_parallel given & switch ' // &
	3167	'back to netCDF4 non-parallel output'
	3168	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3169	netcdf_data_format = netcdf_data_format - 2
[892]	3170	#endif
[1031]	3171	ENDIF
	3172	#endif
[667]	3173
[809]	3174	#if ! defined( __check )
[1031]	3175	!
[1]	3176	!-- Check netcdf precison
	3177	ldum = .FALSE.
	3178	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3179	#endif
[1]	3180	!
	3181	!-- Check, whether a constant diffusion coefficient shall be used
	3182	IF ( km_constant /= -1.0 ) THEN
	3183	IF ( km_constant < 0.0 ) THEN
[215]	3184	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3185	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3186	ELSE
	3187	IF ( prandtl_number < 0.0 ) THEN
[215]	3188	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3189	' < 0.0'
[226]	3190	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3191	ENDIF
	3192	constant_diffusion = .TRUE.
	3193
	3194	IF ( prandtl_layer ) THEN
[215]	3195	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3196	'value of km'
[226]	3197	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3198	ENDIF
	3199	ENDIF
	3200	ENDIF
	3201
	3202	!
[978]	3203	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3204	!-- potential temperature, check the width of the damping layer
[1]	3205	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3206	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3207	message_string = 'pt_damping_width out of range'
[226]	3208	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3209	ENDIF
	3210	ENDIF
	3211
	3212	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3213	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3214	message_string = 'pt_damping_width out of range'
[226]	3215	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3216	ENDIF
	3217	ENDIF
	3218
	3219	!
	3220	!-- Check value range for rif
	3221	IF ( rif_min >= rif_max ) THEN
[215]	3222	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3223	'than rif_max = ', rif_max
[226]	3224	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3225	ENDIF
	3226
	3227	!
	3228	!-- Determine upper and lower hight level indices for random perturbations
[97]	3229	IF ( disturbance_level_b == -9999999.9 ) THEN
	3230	IF ( ocean ) THEN
	3231	disturbance_level_b = zu((nzt*2)/3)
	3232	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3233	ELSE
	3234	disturbance_level_b = zu(nzb+3)
	3235	disturbance_level_ind_b = nzb + 3
	3236	ENDIF
[1]	3237	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3238	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3239	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3240	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3241	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3242	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3243	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3244	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3245	ELSE
	3246	DO k = 3, nzt-2
	3247	IF ( disturbance_level_b <= zu(k) ) THEN
	3248	disturbance_level_ind_b = k
	3249	EXIT
	3250	ENDIF
	3251	ENDDO
	3252	ENDIF
	3253
[97]	3254	IF ( disturbance_level_t == -9999999.9 ) THEN
	3255	IF ( ocean ) THEN
	3256	disturbance_level_t = zu(nzt-3)
	3257	disturbance_level_ind_t = nzt - 3
	3258	ELSE
	3259	disturbance_level_t = zu(nzt/3)
	3260	disturbance_level_ind_t = nzt / 3
	3261	ENDIF
[1]	3262	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3263	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3264	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3265	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3266	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3267	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3268	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3269	disturbance_level_b
[226]	3270	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3271	ELSE
	3272	DO k = 3, nzt-2
	3273	IF ( disturbance_level_t <= zu(k) ) THEN
	3274	disturbance_level_ind_t = k
	3275	EXIT
	3276	ENDIF
	3277	ENDDO
	3278	ENDIF
	3279
	3280	!
	3281	!-- Check again whether the levels determined this way are ok.
	3282	!-- Error may occur at automatic determination and too few grid points in
	3283	!-- z-direction.
	3284	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3285	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3286	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3287	disturbance_level_b
[226]	3288	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3289	ENDIF
	3290
	3291	!
	3292	!-- Determine the horizontal index range for random perturbations.
	3293	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3294	!-- near the inflow and the perturbation area is further limited to ...(1)
	3295	!-- after the initial phase of the flow.
	3296	dist_nxl = 0; dist_nxr = nx
	3297	dist_nys = 0; dist_nyn = ny
	3298	IF ( bc_lr /= 'cyclic' ) THEN
	3299	IF ( inflow_disturbance_begin == -1 ) THEN
	3300	inflow_disturbance_begin = MIN( 10, nx/2 )
	3301	ENDIF
	3302	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3303	THEN
[215]	3304	message_string = 'inflow_disturbance_begin out of range'
[226]	3305	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3306	ENDIF
	3307	IF ( inflow_disturbance_end == -1 ) THEN
	3308	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3309	ENDIF
	3310	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3311	THEN
[215]	3312	message_string = 'inflow_disturbance_end out of range'
[226]	3313	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3314	ENDIF
	3315	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3316	IF ( inflow_disturbance_begin == -1 ) THEN
	3317	inflow_disturbance_begin = MIN( 10, ny/2 )
	3318	ENDIF
	3319	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3320	THEN
[215]	3321	message_string = 'inflow_disturbance_begin out of range'
[226]	3322	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3323	ENDIF
	3324	IF ( inflow_disturbance_end == -1 ) THEN
	3325	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3326	ENDIF
	3327	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3328	THEN
[215]	3329	message_string = 'inflow_disturbance_end out of range'
[226]	3330	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3331	ENDIF
	3332	ENDIF
	3333
[1159]	3334	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3335	dist_nxr = nx - inflow_disturbance_begin
	3336	dist_nxl(1) = nx - inflow_disturbance_end
[1159]	3337	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3338	dist_nxl = inflow_disturbance_begin
	3339	dist_nxr(1) = inflow_disturbance_end
[73]	3340	ENDIF
[1159]	3341	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3342	dist_nyn = ny - inflow_disturbance_begin
	3343	dist_nys(1) = ny - inflow_disturbance_end
[1159]	3344	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3345	dist_nys = inflow_disturbance_begin
	3346	dist_nyn(1) = inflow_disturbance_end
	3347	ENDIF
	3348
	3349	!
[151]	3350	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3351	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[1159]	3352	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3353	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3354	'condition at the inflow boundary'
[226]	3355	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3356	ENDIF
	3357
	3358	!
[1060]	3359	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
[1103]	3360	!-- data from prerun in the first main run
	3361	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
	3362	initializing_actions /= 'read_restart_data' ) THEN
[1060]	3363	message_string = 'turbulent_inflow = .T. requires ' // &
	3364	'initializing_actions = ''cyclic_fill'' '
	3365	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3366	ENDIF
	3367
	3368	!
[151]	3369	!-- In case of turbulent inflow calculate the index of the recycling plane
	3370	IF ( turbulent_inflow ) THEN
	3371	IF ( recycling_width == 9999999.9 ) THEN
	3372	!
	3373	!-- Set the default value for the width of the recycling domain
	3374	recycling_width = 0.1 * nx * dx
	3375	ELSE
	3376	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3377	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3378	' ', recycling_width
[226]	3379	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3380	ENDIF
	3381	ENDIF
	3382	!
	3383	!-- Calculate the index
	3384	recycling_plane = recycling_width / dx
	3385	ENDIF
	3386
	3387	!
[1]	3388	!-- Check random generator
	3389	IF ( random_generator /= 'system-specific' .AND. &
	3390	random_generator /= 'numerical-recipes' ) THEN
[215]	3391	message_string = 'unknown random generator: random_generator = "' // &
	3392	TRIM( random_generator ) // '"'
[226]	3393	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3394	ENDIF
	3395
	3396	!
	3397	!-- Determine damping level index for 1D model
	3398	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3399	IF ( damp_level_1d == -1.0 ) THEN
	3400	damp_level_1d = zu(nzt+1)
	3401	damp_level_ind_1d = nzt + 1
	3402	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3403	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3404	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3405	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3406	ELSE
	3407	DO k = 1, nzt+1
	3408	IF ( damp_level_1d <= zu(k) ) THEN
	3409	damp_level_ind_1d = k
	3410	EXIT
	3411	ENDIF
	3412	ENDDO
	3413	ENDIF
	3414	ENDIF
[215]	3415
[1]	3416	!
	3417	!-- Check some other 1d-model parameters
	3418	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3419	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3420	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3421	'" is unknown'
[226]	3422	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3423	ENDIF
	3424	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3425	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3426	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3427	'" is unknown'
[226]	3428	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3429	ENDIF
	3430
	3431	!
	3432	!-- Set time for the next user defined restart (time_restart is the
	3433	!-- internal parameter for steering restart events)
	3434	IF ( restart_time /= 9999999.9 ) THEN
[291]	3435	IF ( restart_time > time_since_reference_point ) THEN
	3436	time_restart = restart_time
	3437	ENDIF
[1]	3438	ELSE
	3439	!
	3440	!-- In case of a restart run, set internal parameter to default (no restart)
	3441	!-- if the NAMELIST-parameter restart_time is omitted
	3442	time_restart = 9999999.9
	3443	ENDIF
	3444
	3445	!
	3446	!-- Set default value of the time needed to terminate a model run
	3447	IF ( termination_time_needed == -1.0 ) THEN
	3448	IF ( host(1:3) == 'ibm' ) THEN
	3449	termination_time_needed = 300.0
	3450	ELSE
	3451	termination_time_needed = 35.0
	3452	ENDIF
	3453	ENDIF
	3454
	3455	!
	3456	!-- Check the time needed to terminate a model run
	3457	IF ( host(1:3) == 't3e' ) THEN
	3458	!
	3459	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3460	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3461	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3462	WRITE( message_string, * ) 'termination_time_needed = ', &
	3463	termination_time_needed, ' must be > 30.0 on host "', &
	3464	TRIM( host ), '"'
[226]	3465	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3466	ENDIF
	3467	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3468	!
	3469	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3470	!-- because the job time consumed before executing palm (for compiling,
	3471	!-- copying of files, etc.) has to be regarded
	3472	IF ( termination_time_needed < 300.0 ) THEN
[215]	3473	WRITE( message_string, * ) 'termination_time_needed = ', &
	3474	termination_time_needed, ' should be >= 300.0 on host "', &
	3475	TRIM( host ), '"'
[226]	3476	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3477	ENDIF
	3478	ENDIF
	3479
[217]	3480	!
[240]	3481	!-- Check pressure gradient conditions
	3482	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3483	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3484	'w are .TRUE. but one of them must be .FALSE.'
[240]	3485	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3486	ENDIF
	3487	IF ( dp_external ) THEN
	3488	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3489	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3490	' of range'
	3491	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3492	ENDIF
	3493	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3494	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3495	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3496	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3497	ENDIF
	3498	ENDIF
	3499	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3500	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3501	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3502	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3503	ENDIF
[241]	3504	IF ( conserve_volume_flow ) THEN
	3505	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3506
	3507	conserve_volume_flow_mode = 'initial_profiles'
	3508
[241]	3509	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3510	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3511	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3512	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3513	conserve_volume_flow_mode
	3514	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3515	ENDIF
[667]	3516	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3517	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3518	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3519	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3520	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3521	ENDIF
	3522	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3523	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3524	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3525	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3526	' or ''bulk_velocity'''
	3527	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3528	ENDIF
	3529	ENDIF
	3530	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3531	( .NOT. conserve_volume_flow .OR. &
	3532	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3533	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3534	'conserve_volume_flow = .T. and ', &
[241]	3535	'conserve_volume_flow_mode = ''bulk_velocity'''
	3536	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3537	ENDIF
[240]	3538
	3539	!
[264]	3540	!-- Check particle attributes
	3541	IF ( particle_color /= 'none' ) THEN
	3542	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3543	particle_color /= 'z' ) THEN
	3544	message_string = 'illegal value for parameter particle_color: ' // &
	3545	TRIM( particle_color)
	3546	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3547	ELSE
	3548	IF ( color_interval(2) <= color_interval(1) ) THEN
	3549	message_string = 'color_interval(2) <= color_interval(1)'
	3550	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3551	ENDIF
	3552	ENDIF
	3553	ENDIF
	3554
	3555	IF ( particle_dvrpsize /= 'none' ) THEN
	3556	IF ( particle_dvrpsize /= 'absw' ) THEN
	3557	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3558	' ' // TRIM( particle_color)
	3559	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3560	ELSE
	3561	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3562	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3563	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3564	ENDIF
	3565	ENDIF
	3566	ENDIF
	3567
	3568	!
[217]	3569	!-- Check &userpar parameters
	3570	CALL user_check_parameters
[1]	3571
[217]	3572
[667]	3573
[1]	3574	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |