Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1171

Last change on this file since 1171 was 1160, checked in by fricke, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 138.5 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1054]	22	!
[1160]	23	!
[1054]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1160 2013-05-21 12:06:24Z raasch $
	27	!
[1160]	28	! 1159 2013-05-21 11:58:22Z fricke
	29	! bc_lr/ns_dirneu/neudir removed
	30	!
[1116]	31	! 1115 2013-03-26 18:16:16Z hoffmann
	32	! unused variables removed
	33	! drizzle can be used without precipitation
	34	!
[1112]	35	! 1111 2013-03-08 23:54:10Z raasch
	36	! ibc_p_b = 2 removed
	37	!
[1104]	38	! 1103 2013-02-20 02:15:53Z raasch
	39	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
	40	!
[1093]	41	! 1092 2013-02-02 11:24:22Z raasch
	42	! unused variables removed
	43	!
[1070]	44	! 1069 2012-11-28 16:18:43Z maronga
	45	! allow usage of topography in combination with cloud physics
	46	!
[1066]	47	! 1065 2012-11-22 17:42:36Z hoffmann
	48	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	49	! precipitation in order to save computational resources.
	50	!
[1061]	51	! 1060 2012-11-21 07:19:51Z raasch
	52	! additional check for parameter turbulent_inflow
	53	!
[1054]	54	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	55	! necessary changes for the new two-moment cloud physics scheme added:
	56	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	57	! - plant_canopy is not allowed
	58	! - currently, only cache loop_optimization is allowed
	59	! - initial profiles of nr, qr
	60	! - boundary condition of nr, qr
	61	! - check output quantities (qr, nr, prr)
[979]	62	!
[1037]	63	! 1036 2012-10-22 13:43:42Z raasch
	64	! code put under GPL (PALM 3.9)
	65	!
[1035]	66	! 1031/1034 2012-10-22 11:32:49Z raasch
	67	! check of netcdf4 parallel file support
	68	!
[1020]	69	! 1019 2012-09-28 06:46:45Z raasch
	70	! non-optimized version of prognostic_equations not allowed any more
	71	!
[1017]	72	! 1015 2012-09-27 09:23:24Z raasch
	73	! acc allowed for loop optimization,
	74	! checks for adjustment of mixing length to the Prandtl mixing length removed
	75	!
[1004]	76	! 1003 2012-09-14 14:35:53Z raasch
	77	! checks for cases with unequal subdomain sizes removed
	78	!
[1002]	79	! 1001 2012-09-13 14:08:46Z raasch
	80	! all actions concerning leapfrog- and upstream-spline-scheme removed
	81	!
[997]	82	! 996 2012-09-07 10:41:47Z raasch
	83	! little reformatting
[1001]	84
[979]	85	! 978 2012-08-09 08:28:32Z fricke
[978]	86	! setting of bc_lr/ns_dirneu/neudir
	87	! outflow damping layer removed
	88	! check for z0h*
	89	! check for pt_damping_width
[667]	90	!
[965]	91	! 964 2012-07-26 09:14:24Z raasch
	92	! check of old profil-parameters removed
	93	!
[941]	94	! 940 2012-07-09 14:31:00Z raasch
	95	! checks for parameter neutral
	96	!
[925]	97	! 924 2012-06-06 07:44:41Z maronga
	98	! Bugfix: preprocessor directives caused error during compilation
	99	!
[893]	100	! 892 2012-05-02 13:51:44Z maronga
	101	! Bugfix for parameter file check ( excluding __netcdf4 )
	102	!
[867]	103	! 866 2012-03-28 06:44:41Z raasch
	104	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	105	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	106	! timestep
	107	!
[863]	108	! 861 2012-03-26 14:18:34Z suehring
	109	! Check for topography and ws-scheme removed.
	110	! Check for loop_optimization = 'vector' and ws-scheme removed.
	111	!
[846]	112	! 845 2012-03-07 10:23:05Z maronga
	113	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	114	!
[829]	115	! 828 2012-02-21 12:00:36Z raasch
	116	! check of collision_kernel extended
	117	!
[826]	118	! 825 2012-02-19 03:03:44Z raasch
	119	! check for collision_kernel and curvature_solution_effects
	120	!
[810]	121	! 809 2012-01-30 13:32:58Z maronga
	122	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	123	!
[808]	124	! 807 2012-01-25 11:53:51Z maronga
	125	! New cpp directive "__check" implemented which is used by check_namelist_files
	126	!
[775]	127	! 774 2011-10-27 13:34:16Z letzel
	128	! bugfix for prescribed u,v-profiles
	129	!
[768]	130	! 767 2011-10-14 06:39:12Z raasch
	131	! Calculating u,v-profiles from given profiles by linear interpolation.
	132	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	133	!
[708]	134	! 707 2011-03-29 11:39:40Z raasch
	135	! setting of bc_lr/ns_dirrad/raddir
	136	!
	137	! 689 2011-02-20 19:31:12z gryschka
[690]	138	! Bugfix for some logical expressions
	139	! (syntax was not compatible with all compilers)
[687]	140	!
[690]	141	! 680 2011-02-04 23:16:06Z gryschka
[681]	142	! init_vortex is not allowed with volume_flow_control
[668]	143	!
[674]	144	! 673 2011-01-18 16:19:48Z suehring
	145	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	146	!
[668]	147	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	148	! Exchange of parameters between ocean and atmosphere via PE0
	149	! Check for illegal combination of ws-scheme and timestep scheme.
	150	! Check for topography and ws-scheme.
	151	! Check for not cyclic boundary conditions in combination with ws-scheme and
	152	! loop_optimization = 'vector'.
	153	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	154	! Different processor/grid topology in atmosphere and ocean is now allowed!
	155	! Bugfixes in checking for conserve_volume_flow_mode
[601]	156	! 600 2010-11-24 16:10:51Z raasch
	157	! change due to new default value of surface_waterflux
[581]	158	! 580 2010-10-05 13:59:11Z heinze
[601]	159	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	160	!
[568]	161	! 567 2010-10-01 10:46:30Z helmke
	162	! calculating masks changed
	163	!
[565]	164	! 564 2010-09-30 13:18:59Z helmke
	165	! palm message identifiers of masked output changed, 20 replaced by max_masks
	166	!
[554]	167	! 553 2010-09-01 14:09:06Z weinreis
	168	! masks is calculated and removed from inipar
[532]	169	!
	170	! 531 2010-04-21 06:47:21Z heinze
	171	! Bugfix: unit of hyp changed to dbar
[392]	172	!
[525]	173	! 524 2010-03-30 02:04:51Z raasch
	174	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	175	!
[494]	176	! 493 2010-03-01 08:30:24Z raasch
	177	! netcdf_data_format is checked
	178	!
[449]	179	! 411 2009-12-11 14:15:58Z heinze
	180	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	181	! Initialization of large scale vertical motion (subsidence/ascent)
	182	!
	183	! 410 2009-12-04 17:05:40Z letzel
	184	! masked data output
	185	!
[392]	186	! 388 2009-09-23 09:40:33Z raasch
[388]	187	! Check profiles fpr prho and hyp.
[376]	188	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	189	! interval has been set, respective error message is included
[366]	190	! bc_lr_cyc and bc_ns_cyc are set,
[328]	191	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	192	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	193	! Coupling with independent precursor runs.
[264]	194	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	195	! Bugfix: pressure included for profile output
[240]	196	! Check pressure gradient conditions
[256]	197	! topography_grid_convention moved from user_check_parameters
	198	! 'single_street_canyon'
[367]	199	! Added shf* and qsws* to the list of available output data
[226]	200	!
	201	! 222 2009-01-12 16:04:16Z letzel
[217]	202	! +user_check_parameters
[213]	203	! Output of messages replaced by message handling routine.
[206]	204	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	205	! deleted __mpi2 directives
[222]	206	! Check that PALM is called with mrun -K parallel for coupling
[198]	207	!
	208	! 197 2008-09-16 15:29:03Z raasch
[177]	209	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	210	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	211	!
	212	! Strict grid matching along z is not needed for mg-solver.
[153]	213	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	214	! Case of reading data for recycling included in initializing_actions,
[197]	215	! check of turbulent_inflow and calculation of recycling_plane.
	216	! q*2 profile added
[139]	217	!
	218	! 138 2007-11-28 10:03:58Z letzel
[138]	219	! Plant canopy added
[132]	220	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	221	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	222	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	223	!
	224	! 109 2007-08-28 15:26:47Z letzel
[102]	225	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	226	! conditions for temperature and fluxes) in case of coupled runs.
	227	! +profiles for wp and w"e
[104]	228	! Bugfix: Error message concerning output of particle concentration (pc)
	229	! modified
[108]	230	! More checks and more default values for coupled runs
	231	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	232	! cloud_physics = .T.)
	233	! Rayleigh damping for ocean fixed.
[109]	234	! Check and, if necessary, set default value for dt_coupling
[98]	235	!
	236	! 97 2007-06-21 08:23:15Z raasch
[97]	237	! Initial salinity profile is calculated, salinity boundary conditions are
	238	! checked,
[94]	239	! z_max_do1d is checked only in case of ocean = .f.,
[97]	240	! +initial temperature and geostrophic velocity profiles for the ocean version,
	241	! use_pt_reference renamed use_reference
[77]	242	!
[90]	243	! 89 2007-05-25 12:08:31Z raasch
	244	! Check for user-defined profiles
	245	!
[77]	246	! 75 2007-03-22 09:54:05Z raasch
[51]	247	! "by_user" allowed as initializing action, -data_output_ts,
[63]	248	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	249	! and pt_reference are checked, moisture renamed humidity,
[72]	250	! output of precipitation amount/rate and roughnes length + check
[73]	251	! possible negative humidities are avoided in initial profile,
[75]	252	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	253	! revision added to run_description_header
[1]	254	!
[39]	255	! 20 2007-02-26 00:12:32Z raasch
	256	! Temperature and humidity gradients at top are now calculated for nzt+1,
	257	! top_heatflux and respective boundary condition bc_pt_t is checked
	258	!
[3]	259	! RCS Log replace by Id keyword, revision history cleaned up
	260	!
[1]	261	! Revision 1.61 2006/08/04 14:20:25 raasch
	262	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	263	! use_upstream_for_tke, default value for dt_dopts,
	264	! generation of file header moved from routines palm and header to here
	265	!
	266	! Revision 1.1 1997/08/26 06:29:23 raasch
	267	! Initial revision
	268	!
	269	!
	270	! Description:
	271	! ------------
	272	! Check control parameters and deduce further quantities.
	273	!------------------------------------------------------------------------------!
	274
	275	USE arrays_3d
[824]	276	USE cloud_parameters
[1]	277	USE constants
	278	USE control_parameters
[264]	279	USE dvrp_variables
[1]	280	USE grid_variables
	281	USE indices
	282	USE model_1d
	283	USE netcdf_control
	284	USE particle_attributes
	285	USE pegrid
	286	USE profil_parameter
[411]	287	USE subsidence_mod
[1]	288	USE statistics
	289	USE transpose_indices
	290
	291	IMPLICIT NONE
	292
	293	CHARACTER (LEN=1) :: sq
	294	CHARACTER (LEN=6) :: var
	295	CHARACTER (LEN=7) :: unit
	296	CHARACTER (LEN=8) :: date
	297	CHARACTER (LEN=10) :: time
[102]	298	CHARACTER (LEN=40) :: coupling_string
[1]	299	CHARACTER (LEN=100) :: action
	300
[1092]	301	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	302	LOGICAL :: found, ldum
[1092]	303	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	304
	305	!
	306	!-- Warning, if host is not set
	307	IF ( host(1:1) == ' ' ) THEN
[213]	308	message_string = '"host" is not set. Please check that environment ' // &
	309	'variable "localhost" & is set before running PALM'
[226]	310	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	311	ENDIF
	312
	313	!
[102]	314	!-- Check the coupling mode
	315	IF ( coupling_mode /= 'uncoupled' .AND. &
	316	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	317	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	318	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	319	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	320	ENDIF
	321
	322	!
[108]	323	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	324	IF ( coupling_mode /= 'uncoupled') THEN
[213]	325
[108]	326	IF ( dt_coupling == 9999999.9 ) THEN
[213]	327	message_string = 'dt_coupling is not set but required for coup' // &
	328	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	329	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	330	ENDIF
[213]	331
[206]	332	#if defined( __parallel )
[807]	333
	334	!
	335	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	336	!-- program.
	337	!-- check_namelist_files will need the following information of the other
	338	!-- model (atmosphere/ocean).
[845]	339	! dt_coupling = remote
	340	! dt_max = remote
	341	! restart_time = remote
	342	! dt_restart= remote
	343	! simulation_time_since_reference = remote
	344	! dx = remote
[807]	345
	346
[809]	347	#if ! defined( __check )
[667]	348	IF ( myid == 0 ) THEN
	349	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	350	ierr )
	351	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	352	status, ierr )
	353	ENDIF
	354	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	355	#endif
[108]	356	IF ( dt_coupling /= remote ) THEN
[213]	357	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	358	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	359	'dt_coupling_remote = ', remote
[226]	360	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	361	ENDIF
[109]	362	IF ( dt_coupling <= 0.0 ) THEN
[809]	363	#if ! defined( __check )
[667]	364	IF ( myid == 0 ) THEN
	365	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	366	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	367	status, ierr )
	368	ENDIF
	369	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	370	#endif
[109]	371	dt_coupling = MAX( dt_max, remote )
[213]	372	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	373	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	374	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	375	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	376	ENDIF
[809]	377	#if ! defined( __check )
[667]	378	IF ( myid == 0 ) THEN
	379	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	380	ierr )
	381	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	382	status, ierr )
	383	ENDIF
	384	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	385	#endif
[108]	386	IF ( restart_time /= remote ) THEN
[213]	387	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	388	'": restart_time = ', restart_time, '& is not equal to ', &
	389	'restart_time_remote = ', remote
[226]	390	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	391	ENDIF
[809]	392	#if ! defined( __check )
[667]	393	IF ( myid == 0 ) THEN
	394	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	395	ierr )
	396	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	397	status, ierr )
	398	ENDIF
	399	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	400	#endif
[108]	401	IF ( dt_restart /= remote ) THEN
[213]	402	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	403	'": dt_restart = ', dt_restart, '& is not equal to ', &
	404	'dt_restart_remote = ', remote
[226]	405	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	406	ENDIF
[213]	407
[291]	408	simulation_time_since_reference = end_time - coupling_start_time
[809]	409	#if ! defined( __check )
[667]	410	IF ( myid == 0 ) THEN
	411	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	412	14, comm_inter, ierr )
	413	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	414	status, ierr )
	415	ENDIF
	416	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	417	#endif
[291]	418	IF ( simulation_time_since_reference /= remote ) THEN
[213]	419	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	420	'": simulation_time_since_reference = ', &
	421	simulation_time_since_reference, '& is not equal to ', &
	422	'simulation_time_since_reference_remote = ', remote
[226]	423	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	424	ENDIF
[213]	425
[809]	426	#if ! defined( __check )
[667]	427	IF ( myid == 0 ) THEN
	428	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	429	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	430	status, ierr )
[108]	431	ENDIF
[667]	432	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	433
[807]	434	#endif
[667]	435	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	436
	437	IF ( dx < remote ) THEN
	438	WRITE( message_string, * ) 'coupling mode "', &
	439	TRIM( coupling_mode ), &
	440	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	441	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	442	ENDIF
	443
	444	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	445	WRITE( message_string, * ) 'coupling mode "', &
	446	TRIM( coupling_mode ), &
	447	'": Domain size in x-direction is not equal in ocean and atmosphere'
	448	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	449	ENDIF
	450
[108]	451	ENDIF
[213]	452
[809]	453	#if ! defined( __check )
[667]	454	IF ( myid == 0) THEN
	455	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	456	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	457	status, ierr )
[108]	458	ENDIF
[667]	459	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	460	#endif
[667]	461	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	462
	463	IF ( dy < remote ) THEN
	464	WRITE( message_string, * ) 'coupling mode "', &
	465	TRIM( coupling_mode ), &
	466	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	467	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	468	ENDIF
	469
	470	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	471	WRITE( message_string, * ) 'coupling mode "', &
	472	TRIM( coupling_mode ), &
	473	'": Domain size in y-direction is not equal in ocean and atmosphere'
	474	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	475	ENDIF
	476
	477	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	478	WRITE( message_string, * ) 'coupling mode "', &
	479	TRIM( coupling_mode ), &
	480	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	481	' atmosphere'
	482	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	483	ENDIF
	484
	485	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	486	WRITE( message_string, * ) 'coupling mode "', &
	487	TRIM( coupling_mode ), &
	488	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	489	' atmosphere'
	490	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	491	ENDIF
	492
[108]	493	ENDIF
[222]	494	#else
	495	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	496	' ''mrun -K parallel'''
[226]	497	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	498	#endif
	499	ENDIF
	500
[809]	501	#if defined( __parallel ) && ! defined ( __check )
[108]	502	!
	503	!-- Exchange via intercommunicator
[667]	504	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	505	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	506	ierr )
[667]	507	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	508	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	509	comm_inter, status, ierr )
[108]	510	ENDIF
[667]	511	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	512
[108]	513	#endif
	514
	515
	516	!
[1]	517	!-- Generate the file header which is used as a header for most of PALM's
	518	!-- output files
	519	CALL DATE_AND_TIME( date, time )
	520	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	521	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	522	IF ( coupling_mode == 'uncoupled' ) THEN
	523	coupling_string = ''
	524	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	525	coupling_string = ' coupled (atmosphere)'
	526	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	527	coupling_string = ' coupled (ocean)'
	528	ENDIF
[1]	529
[102]	530	WRITE ( run_description_header, &
	531	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	532	TRIM( version ), TRIM( revision ), 'run: ', &
	533	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	534	'host: ', TRIM( host ), run_date, run_time
[1]	535
	536	!
[63]	537	!-- Check the general loop optimization method
	538	IF ( loop_optimization == 'default' ) THEN
	539	IF ( host(1:3) == 'nec' ) THEN
	540	loop_optimization = 'vector'
	541	ELSE
	542	loop_optimization = 'cache'
	543	ENDIF
	544	ENDIF
	545
[1015]	546	SELECT CASE ( TRIM( loop_optimization ) )
	547
[1019]	548	CASE ( 'acc', 'cache', 'vector' )
[1015]	549	CONTINUE
	550
	551	CASE DEFAULT
	552	message_string = 'illegal value given for loop_optimization: "' // &
	553	TRIM( loop_optimization ) // '"'
	554	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	555
	556	END SELECT
	557
[63]	558	!
[1]	559	!-- Check topography setting (check for illegal parameter combinations)
	560	IF ( topography /= 'flat' ) THEN
	561	action = ' '
[861]	562	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	563	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	564	ENDIF
[861]	565	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	566	THEN
[1]	567	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	568	ENDIF
[114]	569	IF ( psolver == 'sor' ) THEN
[1]	570	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	571	ENDIF
	572	IF ( sloping_surface ) THEN
	573	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	574	ENDIF
	575	IF ( galilei_transformation ) THEN
	576	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	577	ENDIF
[1115]	578	IF ( cloud_physics ) THEN
	579	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	580	ENDIF
[1]	581	IF ( cloud_droplets ) THEN
[1115]	582	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
[1]	583	ENDIF
	584	IF ( .NOT. prandtl_layer ) THEN
	585	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	586	ENDIF
	587	IF ( action /= ' ' ) THEN
[213]	588	message_string = 'a non-flat topography does not allow ' // &
	589	TRIM( action )
[226]	590	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	591	ENDIF
[256]	592	!
	593	!-- In case of non-flat topography, check whether the convention how to
	594	!-- define the topography grid has been set correctly, or whether the default
	595	!-- is applicable. If this is not possible, abort.
	596	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	597	IF ( TRIM( topography ) /= 'single_building' .AND. &
	598	TRIM( topography ) /= 'single_street_canyon' .AND. &
	599	TRIM( topography ) /= 'read_from_file' ) THEN
	600	!-- The default value is not applicable here, because it is only valid
	601	!-- for the two standard cases 'single_building' and 'read_from_file'
	602	!-- defined in init_grid.
	603	WRITE( message_string, * ) &
	604	'The value for "topography_grid_convention" ', &
	605	'is not set. Its default value is & only valid for ', &
	606	'"topography" = ''single_building'', ', &
	607	'''single_street_canyon'' & or ''read_from_file''.', &
	608	' & Choose ''cell_edge'' or ''cell_center''.'
	609	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	610	ELSE
	611	!-- The default value is applicable here.
	612	!-- Set convention according to topography.
	613	IF ( TRIM( topography ) == 'single_building' .OR. &
	614	TRIM( topography ) == 'single_street_canyon' ) THEN
	615	topography_grid_convention = 'cell_edge'
	616	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	617	topography_grid_convention = 'cell_center'
	618	ENDIF
	619	ENDIF
	620	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	621	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	622	WRITE( message_string, * ) &
	623	'The value for "topography_grid_convention" is ', &
	624	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	625	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	626	ENDIF
	627
[1]	628	ENDIF
[94]	629
[1]	630	!
[94]	631	!-- Check ocean setting
	632	IF ( ocean ) THEN
[332]	633
[94]	634	action = ' '
	635	IF ( action /= ' ' ) THEN
[213]	636	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	637	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	638	ENDIF
	639
[332]	640	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	641	TRIM( coupling_char ) == '_O' ) THEN
[343]	642
[94]	643	!
[332]	644	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	645	!-- ocean run (this setting is done via mrun-option -y)
[343]	646
[291]	647	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	648	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	649	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	650
[291]	651	ENDIF
	652	!
[1053]	653	!-- Check cloud scheme
	654	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	655	icloud_scheme = 0
	656	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	657	icloud_scheme = 1
	658	ELSE
	659	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	660	TRIM( cloud_scheme ) // '"'
	661	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	662	ENDIF
	663	!
[1]	664	!-- Check whether there are any illegal values
	665	!-- Pressure solver:
	666	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	667	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	668	message_string = 'unknown solver for perturbation pressure: psolver' // &
	669	' = "' // TRIM( psolver ) // '"'
[226]	670	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	671	ENDIF
	672
	673	#if defined( __parallel )
	674	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	675	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	676	'for a 1d domain-decomposition along x & please do' // &
	677	' not set npey/=1 in the parameter file'
[226]	678	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	679	ENDIF
	680	#else
	681	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	682	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	683	' for a parallel environment'
[226]	684	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	685	ENDIF
	686	#endif
	687
	688	IF ( psolver == 'multigrid' ) THEN
	689	IF ( cycle_mg == 'w' ) THEN
	690	gamma_mg = 2
	691	ELSEIF ( cycle_mg == 'v' ) THEN
	692	gamma_mg = 1
	693	ELSE
[213]	694	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	695	TRIM( cycle_mg ) // '"'
[226]	696	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	697	ENDIF
	698	ENDIF
	699
	700	IF ( fft_method /= 'singleton-algorithm' .AND. &
	701	fft_method /= 'temperton-algorithm' .AND. &
	702	fft_method /= 'system-specific' ) THEN
[213]	703	message_string = 'unknown fft-algorithm: fft_method = "' // &
	704	TRIM( fft_method ) // '"'
[226]	705	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	706	ENDIF
[667]	707
	708	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	709	.NOT. call_psolver_at_all_substeps ) THEN
[667]	710	message_string = 'psolver must be called at each RK3 substep when "'//&
	711	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	712	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	713	END IF
[1]	714	!
	715	!-- Advection schemes:
[1001]	716	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	717	THEN
[214]	718	message_string = 'unknown advection scheme: momentum_advec = "' // &
	719	TRIM( momentum_advec ) // '"'
[226]	720	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	721	ENDIF
[1001]	722	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	723	.AND. ( timestep_scheme == 'euler' .OR. &
	724	timestep_scheme == 'runge-kutta-2' ) ) &
	725	THEN
[667]	726	message_string = 'momentum_advec or scalar_advec = "' &
	727	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	728	TRIM( timestep_scheme ) // '"'
[226]	729	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	730	ENDIF
[667]	731	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	732	scalar_advec /= 'bc-scheme' ) &
	733	THEN
[214]	734	message_string = 'unknown advection scheme: scalar_advec = "' // &
	735	TRIM( scalar_advec ) // '"'
[226]	736	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	737	ENDIF
[1019]	738	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	739	THEN
	740	message_string = 'advection_scheme scalar_advec = "' &
	741	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	742	TRIM( loop_optimization ) // '"'
	743	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	744	ENDIF
[1]	745
	746	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	747	use_upstream_for_tke = .TRUE.
[214]	748	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	749	'use_sgs_for_particles = .TRUE.'
[226]	750	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	751	ENDIF
	752
[824]	753	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	754	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	755	'curvature_solution_effects = .TRUE.'
	756	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	757	ENDIF
	758
[1]	759	!
[1019]	760	!-- Set LOGICAL switches to enhance performance
	761	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	762	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	763
	764	!
[1]	765	!-- Timestep schemes:
	766	SELECT CASE ( TRIM( timestep_scheme ) )
	767
	768	CASE ( 'euler' )
	769	intermediate_timestep_count_max = 1
	770
	771	CASE ( 'runge-kutta-2' )
	772	intermediate_timestep_count_max = 2
	773
	774	CASE ( 'runge-kutta-3' )
	775	intermediate_timestep_count_max = 3
	776
	777	CASE DEFAULT
[214]	778	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	779	TRIM( timestep_scheme ) // '"'
[226]	780	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	781
	782	END SELECT
	783
[667]	784	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	785	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	786	message_string = 'momentum advection scheme "' // &
	787	TRIM( momentum_advec ) // '" & does not work with ' // &
	788	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	789	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	790	ENDIF
	791
[825]	792	!
	793	!-- Collision kernels:
	794	SELECT CASE ( TRIM( collision_kernel ) )
	795
[828]	796	CASE ( 'hall', 'hall_fast' )
[825]	797	hall_kernel = .TRUE.
	798
	799	CASE ( 'palm' )
	800	palm_kernel = .TRUE.
	801
[828]	802	CASE ( 'wang', 'wang_fast' )
[825]	803	wang_kernel = .TRUE.
	804
	805	CASE ( 'none' )
	806
	807
	808	CASE DEFAULT
	809	message_string = 'unknown collision kernel: collision_kernel = "' // &
	810	TRIM( collision_kernel ) // '"'
	811	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	812
	813	END SELECT
[828]	814	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	815
[147]	816	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	817	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	818	!
[214]	819	!-- No restart run: several initialising actions are possible
[1]	820	action = initializing_actions
	821	DO WHILE ( TRIM( action ) /= '' )
	822	position = INDEX( action, ' ' )
	823	SELECT CASE ( action(1:position-1) )
	824
	825	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	826	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	827	action = action(position+1:)
	828
	829	CASE DEFAULT
[214]	830	message_string = 'initializing_action = "' // &
	831	TRIM( action ) // '" unkown or not allowed'
[226]	832	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	833
	834	END SELECT
	835	ENDDO
	836	ENDIF
[214]	837
[680]	838	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	839	conserve_volume_flow ) THEN
	840	message_string = 'initializing_actions = "initialize_vortex"' // &
	841	' ist not allowed with conserve_volume_flow = .T.'
	842	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	843	ENDIF
	844
	845
[1]	846	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	847	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	848	message_string = 'initializing_actions = "set_constant_profiles"' // &
	849	' and "set_1d-model_profiles" are not allowed ' // &
	850	'simultaneously'
[226]	851	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	852	ENDIF
[214]	853
[46]	854	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	855	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	856	message_string = 'initializing_actions = "set_constant_profiles"' // &
	857	' and "by_user" are not allowed simultaneously'
[226]	858	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	859	ENDIF
[214]	860
[46]	861	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	862	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	863	message_string = 'initializing_actions = "by_user" and ' // &
	864	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	865	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	866	ENDIF
[1]	867
[75]	868	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	869	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	870	'not allowed with humidity = ', humidity
[226]	871	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	872	ENDIF
	873
[72]	874	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	875	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	876	'not allowed with cloud_physics = ', cloud_physics
[226]	877	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	878	ENDIF
	879
[75]	880	IF ( humidity .AND. sloping_surface ) THEN
[214]	881	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	882	'are not allowed simultaneously'
[226]	883	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	884	ENDIF
	885
[75]	886	IF ( passive_scalar .AND. humidity ) THEN
[214]	887	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	888	'is not allowed simultaneously'
[226]	889	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	890	ENDIF
	891
[138]	892	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	893	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	894	'coefficient & given value is drag_coefficient = 0.0'
[226]	895	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	896	ENDIF
	897
[1053]	898	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	899	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	900	' seifert_beheng'
	901	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	902	ENDIF
	903
	904	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	905	icloud_scheme == 0 ) THEN
	906	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	907	'loop_optimization = cache'
	908	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	909	ENDIF
	910
[1115]	911	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	912	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
	913	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
	914	! 'precipitation = .TRUE. or drizzle = .TRUE.'
	915	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	916	! ENDIF
[1065]	917
[1]	918	!
	919	!-- In case of no model continuation run, check initialising parameters and
	920	!-- deduce further quantities
	921	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	922
	923	!
[767]	924	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	925	pt_init = pt_surface
[1053]	926	IF ( humidity ) THEN
	927	q_init = q_surface
	928	ENDIF
[94]	929	IF ( ocean ) sa_init = sa_surface
	930	IF ( passive_scalar ) q_init = s_surface
[138]	931	IF ( plant_canopy ) lad = 0.0
[1]	932
	933	!
	934	!--
	935	!-- If required, compute initial profile of the geostrophic wind
	936	!-- (component ug)
	937	i = 1
	938	gradient = 0.0
[97]	939
	940	IF ( .NOT. ocean ) THEN
	941
	942	ug_vertical_gradient_level_ind(1) = 0
	943	ug(0) = ug_surface
	944	DO k = 1, nzt+1
[177]	945	IF ( i < 11 ) THEN
	946	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	947	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	948	gradient = ug_vertical_gradient(i) / 100.0
	949	ug_vertical_gradient_level_ind(i) = k - 1
	950	i = i + 1
[1]	951	ENDIF
[177]	952	ENDIF
[97]	953	IF ( gradient /= 0.0 ) THEN
	954	IF ( k /= 1 ) THEN
	955	ug(k) = ug(k-1) + dzu(k) * gradient
	956	ELSE
	957	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	958	ENDIF
[1]	959	ELSE
[97]	960	ug(k) = ug(k-1)
[1]	961	ENDIF
[97]	962	ENDDO
[1]	963
[97]	964	ELSE
	965
	966	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	967	ug(nzt+1) = ug_surface
[667]	968	DO k = nzt, nzb, -1
[177]	969	IF ( i < 11 ) THEN
	970	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	971	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	972	gradient = ug_vertical_gradient(i) / 100.0
	973	ug_vertical_gradient_level_ind(i) = k + 1
	974	i = i + 1
[97]	975	ENDIF
	976	ENDIF
	977	IF ( gradient /= 0.0 ) THEN
	978	IF ( k /= nzt ) THEN
	979	ug(k) = ug(k+1) - dzu(k+1) * gradient
	980	ELSE
	981	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	982	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	983	ENDIF
	984	ELSE
	985	ug(k) = ug(k+1)
	986	ENDIF
	987	ENDDO
	988
	989	ENDIF
	990
[1]	991	!
[767]	992	!-- In case of no given gradients for ug, choose a zero gradient
[97]	993	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	994	ug_vertical_gradient_level(1) = 0.0
	995	ENDIF
	996
	997	!
	998	!--
	999	!-- If required, compute initial profile of the geostrophic wind
	1000	!-- (component vg)
	1001	i = 1
	1002	gradient = 0.0
[97]	1003
	1004	IF ( .NOT. ocean ) THEN
	1005
	1006	vg_vertical_gradient_level_ind(1) = 0
	1007	vg(0) = vg_surface
	1008	DO k = 1, nzt+1
[177]	1009	IF ( i < 11 ) THEN
	1010	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1011	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1012	gradient = vg_vertical_gradient(i) / 100.0
	1013	vg_vertical_gradient_level_ind(i) = k - 1
	1014	i = i + 1
[1]	1015	ENDIF
	1016	ENDIF
[97]	1017	IF ( gradient /= 0.0 ) THEN
	1018	IF ( k /= 1 ) THEN
	1019	vg(k) = vg(k-1) + dzu(k) * gradient
	1020	ELSE
	1021	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	1022	ENDIF
[1]	1023	ELSE
[97]	1024	vg(k) = vg(k-1)
[1]	1025	ENDIF
[97]	1026	ENDDO
[1]	1027
[97]	1028	ELSE
	1029
[121]	1030	vg_vertical_gradient_level_ind(1) = nzt+1
	1031	vg(nzt+1) = vg_surface
[667]	1032	DO k = nzt, nzb, -1
[177]	1033	IF ( i < 11 ) THEN
	1034	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1035	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1036	gradient = vg_vertical_gradient(i) / 100.0
	1037	vg_vertical_gradient_level_ind(i) = k + 1
	1038	i = i + 1
[97]	1039	ENDIF
	1040	ENDIF
	1041	IF ( gradient /= 0.0 ) THEN
	1042	IF ( k /= nzt ) THEN
	1043	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1044	ELSE
	1045	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1046	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1047	ENDIF
	1048	ELSE
	1049	vg(k) = vg(k+1)
	1050	ENDIF
	1051	ENDDO
	1052
	1053	ENDIF
	1054
[1]	1055	!
[767]	1056	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1057	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1058	vg_vertical_gradient_level(1) = 0.0
	1059	ENDIF
	1060
	1061	!
[767]	1062	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1063	!-- interpolate them from wind profile data (if given)
	1064	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1065
	1066	u_init = ug
	1067	v_init = vg
	1068
	1069	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1070
	1071	IF ( uv_heights(1) /= 0.0 ) THEN
	1072	message_string = 'uv_heights(1) must be 0.0'
	1073	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1074	ENDIF
	1075
	1076	use_prescribed_profile_data = .TRUE.
	1077
	1078	kk = 1
	1079	u_init(0) = 0.0
	1080	v_init(0) = 0.0
	1081
	1082	DO k = 1, nz+1
	1083
	1084	IF ( kk < 100 ) THEN
	1085	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1086	kk = kk + 1
	1087	IF ( kk == 100 ) EXIT
	1088	ENDDO
	1089	ENDIF
	1090
[774]	1091	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1092	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1093	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1094	( u_profile(kk+1) - u_profile(kk) )
	1095	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1096	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1097	( v_profile(kk+1) - v_profile(kk) )
	1098	ELSE
	1099	u_init(k) = u_profile(kk)
	1100	v_init(k) = v_profile(kk)
	1101	ENDIF
	1102
	1103	ENDDO
	1104
	1105	ELSE
	1106
	1107	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1108	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1109
	1110	ENDIF
	1111
	1112	!
[94]	1113	!-- Compute initial temperature profile using the given temperature gradients
[940]	1114	IF ( .NOT. neutral ) THEN
[94]	1115
[940]	1116	i = 1
	1117	gradient = 0.0
[94]	1118
[940]	1119	IF ( .NOT. ocean ) THEN
	1120
	1121	pt_vertical_gradient_level_ind(1) = 0
	1122	DO k = 1, nzt+1
	1123	IF ( i < 11 ) THEN
	1124	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1125	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1126	gradient = pt_vertical_gradient(i) / 100.0
	1127	pt_vertical_gradient_level_ind(i) = k - 1
	1128	i = i + 1
	1129	ENDIF
[1]	1130	ENDIF
[940]	1131	IF ( gradient /= 0.0 ) THEN
	1132	IF ( k /= 1 ) THEN
	1133	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1134	ELSE
	1135	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1136	ENDIF
[94]	1137	ELSE
[940]	1138	pt_init(k) = pt_init(k-1)
[94]	1139	ENDIF
[940]	1140	ENDDO
[1]	1141
[940]	1142	ELSE
[94]	1143
[940]	1144	pt_vertical_gradient_level_ind(1) = nzt+1
	1145	DO k = nzt, 0, -1
	1146	IF ( i < 11 ) THEN
	1147	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1148	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1149	gradient = pt_vertical_gradient(i) / 100.0
	1150	pt_vertical_gradient_level_ind(i) = k + 1
	1151	i = i + 1
	1152	ENDIF
[94]	1153	ENDIF
[940]	1154	IF ( gradient /= 0.0 ) THEN
	1155	IF ( k /= nzt ) THEN
	1156	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1157	ELSE
	1158	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1159	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1160	ENDIF
[94]	1161	ELSE
[940]	1162	pt_init(k) = pt_init(k+1)
[94]	1163	ENDIF
[940]	1164	ENDDO
[94]	1165
[940]	1166	ENDIF
	1167
[94]	1168	ENDIF
	1169
[1]	1170	!
	1171	!-- In case of no given temperature gradients, choose gradient of neutral
	1172	!-- stratification
[94]	1173	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1174	pt_vertical_gradient_level(1) = 0.0
	1175	ENDIF
	1176
	1177	!
[94]	1178	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1179	!-- boundary condition
[19]	1180	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1181
	1182	!
	1183	!-- If required, compute initial humidity or scalar profile using the given
	1184	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1185	!-- values of the scalar parameters on humidity parameters
	1186	IF ( passive_scalar ) THEN
	1187	bc_q_b = bc_s_b
	1188	bc_q_t = bc_s_t
	1189	q_surface = s_surface
	1190	q_surface_initial_change = s_surface_initial_change
	1191	q_vertical_gradient = s_vertical_gradient
	1192	q_vertical_gradient_level = s_vertical_gradient_level
	1193	surface_waterflux = surface_scalarflux
[407]	1194	wall_humidityflux = wall_scalarflux
[1]	1195	ENDIF
	1196
[75]	1197	IF ( humidity .OR. passive_scalar ) THEN
[1]	1198
	1199	i = 1
	1200	gradient = 0.0
	1201	q_vertical_gradient_level_ind(1) = 0
	1202	DO k = 1, nzt+1
[177]	1203	IF ( i < 11 ) THEN
	1204	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1205	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1206	gradient = q_vertical_gradient(i) / 100.0
	1207	q_vertical_gradient_level_ind(i) = k - 1
	1208	i = i + 1
[1]	1209	ENDIF
	1210	ENDIF
	1211	IF ( gradient /= 0.0 ) THEN
	1212	IF ( k /= 1 ) THEN
	1213	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1214	ELSE
	1215	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1216	ENDIF
	1217	ELSE
	1218	q_init(k) = q_init(k-1)
	1219	ENDIF
[72]	1220	!
	1221	!-- Avoid negative humidities
	1222	IF ( q_init(k) < 0.0 ) THEN
	1223	q_init(k) = 0.0
	1224	ENDIF
[1]	1225	ENDDO
	1226
	1227	!
	1228	!-- In case of no given humidity gradients, choose zero gradient
	1229	!-- conditions
	1230	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1231	q_vertical_gradient_level(1) = 0.0
	1232	ENDIF
	1233	!
[1053]	1234	!-- Store humidity, rain water content and rain drop concentration
	1235	!-- gradient at the top boundary for possile Neumann boundary condition
	1236	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1237	ENDIF
	1238
[94]	1239	!
	1240	!-- If required, compute initial salinity profile using the given salinity
	1241	!-- gradients
	1242	IF ( ocean ) THEN
	1243
	1244	i = 1
	1245	gradient = 0.0
	1246
	1247	sa_vertical_gradient_level_ind(1) = nzt+1
	1248	DO k = nzt, 0, -1
[177]	1249	IF ( i < 11 ) THEN
	1250	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1251	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1252	gradient = sa_vertical_gradient(i) / 100.0
	1253	sa_vertical_gradient_level_ind(i) = k + 1
	1254	i = i + 1
[94]	1255	ENDIF
	1256	ENDIF
	1257	IF ( gradient /= 0.0 ) THEN
	1258	IF ( k /= nzt ) THEN
	1259	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1260	ELSE
	1261	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1262	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1263	ENDIF
	1264	ELSE
	1265	sa_init(k) = sa_init(k+1)
	1266	ENDIF
	1267	ENDDO
	1268
	1269	ENDIF
	1270
[138]	1271	!
[388]	1272	!-- If required compute the profile of leaf area density used in the plant
	1273	!-- canopy model
[138]	1274	IF ( plant_canopy ) THEN
	1275
	1276	i = 1
	1277	gradient = 0.0
[1]	1278
[138]	1279	IF ( .NOT. ocean ) THEN
[153]	1280
	1281	lad(0) = lad_surface
[138]	1282
	1283	lad_vertical_gradient_level_ind(1) = 0
	1284	DO k = 1, pch_index
[177]	1285	IF ( i < 11 ) THEN
	1286	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1287	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1288	gradient = lad_vertical_gradient(i)
	1289	lad_vertical_gradient_level_ind(i) = k - 1
	1290	i = i + 1
[138]	1291	ENDIF
	1292	ENDIF
	1293	IF ( gradient /= 0.0 ) THEN
	1294	IF ( k /= 1 ) THEN
	1295	lad(k) = lad(k-1) + dzu(k) * gradient
	1296	ELSE
	1297	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1298	ENDIF
	1299	ELSE
	1300	lad(k) = lad(k-1)
	1301	ENDIF
	1302	ENDDO
	1303
	1304	ENDIF
	1305
[1]	1306	!
[388]	1307	!-- In case of no given leaf area density gradients, choose a vanishing
	1308	!-- gradient
[138]	1309	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1310	lad_vertical_gradient_level(1) = 0.0
	1311	ENDIF
	1312
	1313	ENDIF
	1314
	1315	ENDIF
[411]	1316
	1317	!
	1318	!-- Initialize large scale subsidence if required
[580]	1319	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1320	large_scale_subsidence = .TRUE.
	1321	CALL init_w_subsidence
	1322	END IF
	1323
[138]	1324
[667]	1325
[138]	1326	!
[1]	1327	!-- Compute Coriolis parameter
	1328	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1329	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1330
	1331	!
[97]	1332	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1333	!-- set the reference temperature equal to the surface temperature.
	1334	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1335
	1336	!
[97]	1337	!-- Reference value has to be used in buoyancy terms
	1338	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1339
	1340	!
	1341	!-- Sign of buoyancy/stability terms
	1342	IF ( ocean ) atmos_ocean_sign = -1.0
	1343
	1344	!
[108]	1345	!-- Ocean version must use flux boundary conditions at the top
	1346	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1347	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1348	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1349	ENDIF
[97]	1350
	1351	!
[1]	1352	!-- In case of a given slope, compute the relevant quantities
	1353	IF ( alpha_surface /= 0.0 ) THEN
	1354	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1355	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1356	' ) must be < 90.0'
[226]	1357	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1358	ENDIF
	1359	sloping_surface = .TRUE.
	1360	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1361	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1362	ENDIF
	1363
	1364	!
	1365	!-- Check time step and cfl_factor
	1366	IF ( dt /= -1.0 ) THEN
	1367	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1368	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1369	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1370	ENDIF
	1371	dt_3d = dt
	1372	dt_fixed = .TRUE.
	1373	ENDIF
	1374
	1375	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1376	IF ( cfl_factor == -1.0 ) THEN
[1001]	1377	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1378	cfl_factor = 0.8
[1001]	1379	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1380	cfl_factor = 0.9
[1]	1381	ELSE
[1001]	1382	cfl_factor = 0.9
[1]	1383	ENDIF
	1384	ELSE
[215]	1385	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1386	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1387	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1388	ENDIF
	1389	ENDIF
	1390
	1391	!
	1392	!-- Store simulated time at begin
	1393	simulated_time_at_begin = simulated_time
	1394
	1395	!
[291]	1396	!-- Store reference time for coupled runs and change the coupling flag,
	1397	!-- if ...
	1398	IF ( simulated_time == 0.0 ) THEN
	1399	IF ( coupling_start_time == 0.0 ) THEN
	1400	time_since_reference_point = 0.0
	1401	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1402	run_coupled = .FALSE.
	1403	ENDIF
	1404	ENDIF
	1405
	1406	!
[1]	1407	!-- Set wind speed in the Galilei-transformed system
	1408	IF ( galilei_transformation ) THEN
[1053]	1409	IF ( use_ug_for_galilei_tr .AND. &
	1410	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1411	ug_vertical_gradient(1) == 0.0 .AND. &
	1412	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1413	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1414	u_gtrans = ug_surface * 0.6
	1415	v_gtrans = vg_surface * 0.6
[1053]	1416	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1417	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1418	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1419	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1420	' with galilei transformation'
[226]	1421	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1422	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1423	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1424	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1425	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1426	' with galilei transformation'
[226]	1427	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1428	ELSE
[215]	1429	message_string = 'variable translation speed used for galilei-' // &
	1430	'transformation, which may cause & instabilities in stably ' // &
	1431	'stratified regions'
[226]	1432	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1433	ENDIF
	1434	ENDIF
	1435
	1436	!
	1437	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1438	!-- fluxes have to be used in the diffusion-terms
	1439	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1440
	1441	!
	1442	!-- Check boundary conditions and set internal variables:
	1443	!-- Lateral boundary conditions
[73]	1444	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[1159]	1445	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1446	message_string = 'unknown boundary condition: bc_lr = "' // &
	1447	TRIM( bc_lr ) // '"'
[226]	1448	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1449	ENDIF
[73]	1450	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[1159]	1451	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1452	message_string = 'unknown boundary condition: bc_ns = "' // &
	1453	TRIM( bc_ns ) // '"'
[226]	1454	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1455	ENDIF
	1456
	1457	!
[366]	1458	!-- Internal variables used for speed optimization in if clauses
[707]	1459	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1460	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1461	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1462	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1463	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1464	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1465
	1466	!
[1]	1467	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1468	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1469	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1470	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1471	IF ( psolver /= 'multigrid' ) THEN
[215]	1472	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1473	'psolver = "' // TRIM( psolver ) // '"'
[226]	1474	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1475	ENDIF
[667]	1476	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1477	momentum_advec /= 'ws-scheme') THEN
[215]	1478	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1479	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1480	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1481	ENDIF
[667]	1482	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1483	scalar_advec /= 'ws-scheme' ) THEN
[215]	1484	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1485	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1486	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1487	ENDIF
	1488	IF ( galilei_transformation ) THEN
[215]	1489	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1490	'galilei_transformation = .T.'
[226]	1491	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1492	ENDIF
	1493	ENDIF
	1494
	1495	!
	1496	!-- Bottom boundary condition for the turbulent Kinetic energy
	1497	IF ( bc_e_b == 'neumann' ) THEN
	1498	ibc_e_b = 1
	1499	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1500	ibc_e_b = 2
[1015]	1501	IF ( prandtl_layer ) THEN
	1502	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1503	TRIM( bc_e_b ) // '"'
[226]	1504	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1505	ENDIF
	1506	IF ( .NOT. prandtl_layer ) THEN
	1507	bc_e_b = 'neumann'
	1508	ibc_e_b = 1
[215]	1509	message_string = 'boundary condition bc_e_b changed to "' // &
	1510	TRIM( bc_e_b ) // '"'
[226]	1511	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1512	ENDIF
	1513	ELSE
[215]	1514	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1515	TRIM( bc_e_b ) // '"'
[226]	1516	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1517	ENDIF
	1518
	1519	!
	1520	!-- Boundary conditions for perturbation pressure
	1521	IF ( bc_p_b == 'dirichlet' ) THEN
	1522	ibc_p_b = 0
	1523	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1524	ibc_p_b = 1
	1525	ELSE
[215]	1526	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1527	TRIM( bc_p_b ) // '"'
[226]	1528	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1529	ENDIF
[1111]	1530
[1]	1531	IF ( bc_p_t == 'dirichlet' ) THEN
	1532	ibc_p_t = 0
	1533	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1534	ibc_p_t = 1
	1535	ELSE
[215]	1536	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1537	TRIM( bc_p_t ) // '"'
[226]	1538	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1539	ENDIF
	1540
	1541	!
	1542	!-- Boundary conditions for potential temperature
[102]	1543	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1544	ibc_pt_b = 2
[1]	1545	ELSE
[102]	1546	IF ( bc_pt_b == 'dirichlet' ) THEN
	1547	ibc_pt_b = 0
	1548	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1549	ibc_pt_b = 1
	1550	ELSE
[215]	1551	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1552	TRIM( bc_pt_b ) // '"'
[226]	1553	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1554	ENDIF
	1555	ENDIF
[102]	1556
[1]	1557	IF ( bc_pt_t == 'dirichlet' ) THEN
	1558	ibc_pt_t = 0
	1559	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1560	ibc_pt_t = 1
[19]	1561	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1562	ibc_pt_t = 2
[1]	1563	ELSE
[215]	1564	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1565	TRIM( bc_pt_t ) // '"'
[226]	1566	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1567	ENDIF
	1568
[20]	1569	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1570	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1571
	1572	IF ( neutral ) THEN
	1573
	1574	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1575	THEN
	1576	message_string = 'heatflux must not be set for pure neutral flow'
	1577	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1578	ENDIF
	1579
	1580	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1581	THEN
	1582	message_string = 'heatflux must not be set for pure neutral flow'
	1583	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1584	ENDIF
	1585
	1586	ENDIF
	1587
[103]	1588	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1589	top_momentumflux_v /= 9999999.9 ) THEN
	1590	constant_top_momentumflux = .TRUE.
	1591	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1592	top_momentumflux_v == 9999999.9 ) ) THEN
	1593	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1594	'must be set'
[226]	1595	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1596	ENDIF
[1]	1597
	1598	!
	1599	!-- A given surface temperature implies Dirichlet boundary condition for
	1600	!-- temperature. In this case specification of a constant heat flux is
	1601	!-- forbidden.
	1602	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1603	surface_heatflux /= 0.0 ) THEN
[215]	1604	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1605	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1606	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1607	ENDIF
	1608	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1609	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1610	'wed with pt_surface_initial_change (/=0) = ', &
	1611	pt_surface_initial_change
[226]	1612	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1613	ENDIF
	1614
	1615	!
[19]	1616	!-- A given temperature at the top implies Dirichlet boundary condition for
	1617	!-- temperature. In this case specification of a constant heat flux is
	1618	!-- forbidden.
	1619	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1620	top_heatflux /= 0.0 ) THEN
[215]	1621	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1622	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1623	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1624	ENDIF
	1625
	1626	!
[95]	1627	!-- Boundary conditions for salinity
	1628	IF ( ocean ) THEN
	1629	IF ( bc_sa_t == 'dirichlet' ) THEN
	1630	ibc_sa_t = 0
	1631	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1632	ibc_sa_t = 1
	1633	ELSE
[215]	1634	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1635	TRIM( bc_sa_t ) // '"'
[226]	1636	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1637	ENDIF
	1638
	1639	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1640	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1641	message_string = 'boundary condition: bc_sa_t = "' // &
	1642	TRIM( bc_sa_t ) // '" requires to set ' // &
	1643	'top_salinityflux'
[226]	1644	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1645	ENDIF
[95]	1646
	1647	!
	1648	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1649	!-- salinity. In this case specification of a constant salinity flux is
	1650	!-- forbidden.
	1651	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1652	top_salinityflux /= 0.0 ) THEN
[215]	1653	message_string = 'boundary condition: bc_sa_t = "' // &
	1654	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1655	'constant_top_salinityflux = .TRUE.'
[226]	1656	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1657	ENDIF
	1658
	1659	ENDIF
	1660
	1661	!
[75]	1662	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1663	!-- water content / scalar
[75]	1664	IF ( humidity .OR. passive_scalar ) THEN
	1665	IF ( humidity ) THEN
[1]	1666	sq = 'q'
	1667	ELSE
	1668	sq = 's'
	1669	ENDIF
	1670	IF ( bc_q_b == 'dirichlet' ) THEN
	1671	ibc_q_b = 0
	1672	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1673	ibc_q_b = 1
	1674	ELSE
[215]	1675	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1676	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1677	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1678	ENDIF
	1679	IF ( bc_q_t == 'dirichlet' ) THEN
	1680	ibc_q_t = 0
	1681	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1682	ibc_q_t = 1
	1683	ELSE
[215]	1684	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1685	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1686	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1687	ENDIF
	1688
[600]	1689	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1690
	1691	!
	1692	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1693	!-- humidity. In this case specification of a constant water flux is
[1]	1694	!-- forbidden.
	1695	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1696	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1697	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1698	'th prescribed surface flux'
[226]	1699	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1700	ENDIF
	1701	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1702	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1703	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1704	q_surface_initial_change
[226]	1705	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1706	ENDIF
[1053]	1707
[1]	1708	ENDIF
	1709	!
	1710	!-- Boundary conditions for horizontal components of wind speed
	1711	IF ( bc_uv_b == 'dirichlet' ) THEN
	1712	ibc_uv_b = 0
	1713	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1714	ibc_uv_b = 1
	1715	IF ( prandtl_layer ) THEN
[215]	1716	message_string = 'boundary condition: bc_uv_b = "' // &
	1717	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1718	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1719	ENDIF
	1720	ELSE
[215]	1721	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1722	TRIM( bc_uv_b ) // '"'
[226]	1723	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1724	ENDIF
[667]	1725	!
	1726	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1727	!-- assigned with the u and v values of the ocean surface
	1728	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1729	ibc_uv_b = 2
	1730	ENDIF
[215]	1731
[108]	1732	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1733	bc_uv_t = 'neumann'
[1]	1734	ibc_uv_t = 1
	1735	ELSE
[132]	1736	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1737	ibc_uv_t = 0
[767]	1738	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1739	!
	1740	!-- Velocities for the initial u,v-profiles are set zero at the top
	1741	!-- in case of dirichlet_0 conditions
	1742	u_init(nzt+1) = 0.0
	1743	v_init(nzt+1) = 0.0
	1744	ENDIF
[108]	1745	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1746	ibc_uv_t = 1
	1747	ELSE
[215]	1748	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1749	TRIM( bc_uv_t ) // '"'
[226]	1750	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1751	ENDIF
	1752	ENDIF
	1753
	1754	!
	1755	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1756	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1757	rayleigh_damping_factor = 0.0
[1]	1758	ELSE
	1759	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1760	THEN
[215]	1761	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1762	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1763	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1764	ENDIF
	1765	ENDIF
	1766
	1767	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1768	IF ( .NOT. ocean ) THEN
	1769	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1770	ELSE
	1771	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1772	ENDIF
[1]	1773	ELSE
[108]	1774	IF ( .NOT. ocean ) THEN
	1775	IF ( rayleigh_damping_height < 0.0 .OR. &
	1776	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1777	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1778	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1779	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1780	ENDIF
[108]	1781	ELSE
	1782	IF ( rayleigh_damping_height > 0.0 .OR. &
	1783	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1784	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1785	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1786	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1787	ENDIF
[1]	1788	ENDIF
	1789	ENDIF
	1790
	1791	!
	1792	!-- Check number of chosen statistic regions. More than 10 regions are not
	1793	!-- allowed, because so far no more than 10 corresponding output files can
	1794	!-- be opened (cf. check_open)
	1795	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1796	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1797	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1798	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1799	ENDIF
	1800	IF ( normalizing_region > statistic_regions .OR. &
	1801	normalizing_region < 0) THEN
[215]	1802	WRITE ( message_string, * ) 'normalizing_region = ', &
	1803	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1804	' (value of statistic_regions)'
[226]	1805	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1806	ENDIF
	1807
	1808	!
[116]	1809	!-- Check the interval for sorting particles.
	1810	!-- Using particles as cloud droplets requires sorting after each timestep.
	1811	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1812	dt_sort_particles = 0.0
[215]	1813	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1814	'_droplets = .TRUE.'
[226]	1815	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1816	ENDIF
	1817
	1818	!
[1]	1819	!-- Set the default intervals for data output, if necessary
	1820	!-- NOTE: dt_dosp has already been set in package_parin
	1821	IF ( dt_data_output /= 9999999.9 ) THEN
	1822	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1823	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1824	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1825	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1826	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1827	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1828	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1829	DO mid = 1, max_masks
[410]	1830	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1831	ENDDO
[1]	1832	ENDIF
	1833
	1834	!
	1835	!-- Set the default skip time intervals for data output, if necessary
	1836	IF ( skip_time_dopr == 9999999.9 ) &
	1837	skip_time_dopr = skip_time_data_output
	1838	IF ( skip_time_dosp == 9999999.9 ) &
	1839	skip_time_dosp = skip_time_data_output
	1840	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1841	skip_time_do2d_xy = skip_time_data_output
	1842	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1843	skip_time_do2d_xz = skip_time_data_output
	1844	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1845	skip_time_do2d_yz = skip_time_data_output
	1846	IF ( skip_time_do3d == 9999999.9 ) &
	1847	skip_time_do3d = skip_time_data_output
	1848	IF ( skip_time_data_output_av == 9999999.9 ) &
	1849	skip_time_data_output_av = skip_time_data_output
[564]	1850	DO mid = 1, max_masks
[410]	1851	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1852	skip_time_domask(mid) = skip_time_data_output
	1853	ENDDO
[1]	1854
	1855	!
	1856	!-- Check the average intervals (first for 3d-data, then for profiles and
	1857	!-- spectra)
	1858	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1859	WRITE( message_string, * ) 'averaging_interval = ', &
	1860	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1861	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1862	ENDIF
	1863
	1864	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1865	averaging_interval_pr = averaging_interval
	1866	ENDIF
	1867
	1868	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1869	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1870	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1871	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1872	ENDIF
	1873
	1874	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1875	averaging_interval_sp = averaging_interval
	1876	ENDIF
	1877
	1878	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1879	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1880	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1881	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1882	ENDIF
	1883
	1884	!
	1885	!-- Set the default interval for profiles entering the temporal average
	1886	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1887	dt_averaging_input_pr = dt_averaging_input
	1888	ENDIF
	1889
	1890	!
	1891	!-- Set the default interval for the output of timeseries to a reasonable
	1892	!-- value (tries to minimize the number of calls of flow_statistics)
	1893	IF ( dt_dots == 9999999.9 ) THEN
	1894	IF ( averaging_interval_pr == 0.0 ) THEN
	1895	dt_dots = MIN( dt_run_control, dt_dopr )
	1896	ELSE
	1897	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1898	ENDIF
	1899	ENDIF
	1900
	1901	!
	1902	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1903	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1904	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1905	dt_averaging_input, ' must be <= averaging_interval = ', &
	1906	averaging_interval
[226]	1907	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1908	ENDIF
	1909
	1910	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1911	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1912	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1913	averaging_interval_pr
[226]	1914	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1915	ENDIF
	1916
	1917	!
[72]	1918	!-- Set the default value for the integration interval of precipitation amount
	1919	IF ( precipitation ) THEN
	1920	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1921	precipitation_amount_interval = dt_do2d_xy
	1922	ELSE
	1923	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1924	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1925	precipitation_amount_interval, ' must not be larger than ', &
	1926	'dt_do2d_xy = ', dt_do2d_xy
[226]	1927	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1928	ENDIF
	1929	ENDIF
	1930	ENDIF
	1931
	1932	!
[1]	1933	!-- Determine the number of output profiles and check whether they are
	1934	!-- permissible
	1935	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1936
	1937	dopr_n = dopr_n + 1
	1938	i = dopr_n
	1939
	1940	!
	1941	!-- Determine internal profile number (for hom, homs)
	1942	!-- and store height levels
	1943	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1944
	1945	CASE ( 'u', '#u' )
	1946	dopr_index(i) = 1
[87]	1947	dopr_unit(i) = 'm/s'
[1]	1948	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1949	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1950	dopr_initial_index(i) = 5
	1951	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1952	data_output_pr(i) = data_output_pr(i)(2:)
	1953	ENDIF
	1954
	1955	CASE ( 'v', '#v' )
	1956	dopr_index(i) = 2
[87]	1957	dopr_unit(i) = 'm/s'
	1958	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1959	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1960	dopr_initial_index(i) = 6
	1961	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1962	data_output_pr(i) = data_output_pr(i)(2:)
	1963	ENDIF
	1964
	1965	CASE ( 'w' )
	1966	dopr_index(i) = 3
[87]	1967	dopr_unit(i) = 'm/s'
	1968	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1969
	1970	CASE ( 'pt', '#pt' )
	1971	IF ( .NOT. cloud_physics ) THEN
	1972	dopr_index(i) = 4
[87]	1973	dopr_unit(i) = 'K'
[1]	1974	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1975	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1976	dopr_initial_index(i) = 7
	1977	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1978	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1979	data_output_pr(i) = data_output_pr(i)(2:)
	1980	ENDIF
	1981	ELSE
	1982	dopr_index(i) = 43
[87]	1983	dopr_unit(i) = 'K'
[1]	1984	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1985	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1986	dopr_initial_index(i) = 28
	1987	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1988	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1989	data_output_pr(i) = data_output_pr(i)(2:)
	1990	ENDIF
	1991	ENDIF
	1992
	1993	CASE ( 'e' )
	1994	dopr_index(i) = 8
[87]	1995	dopr_unit(i) = 'm2/s2'
[1]	1996	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1997	hom(nzb,2,8,:) = 0.0
	1998
	1999	CASE ( 'km', '#km' )
	2000	dopr_index(i) = 9
[87]	2001	dopr_unit(i) = 'm2/s'
[1]	2002	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003	hom(nzb,2,9,:) = 0.0
	2004	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2005	dopr_initial_index(i) = 23
	2006	hom(:,2,23,:) = hom(:,2,9,:)
	2007	data_output_pr(i) = data_output_pr(i)(2:)
	2008	ENDIF
	2009
	2010	CASE ( 'kh', '#kh' )
	2011	dopr_index(i) = 10
[87]	2012	dopr_unit(i) = 'm2/s'
[1]	2013	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2014	hom(nzb,2,10,:) = 0.0
	2015	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2016	dopr_initial_index(i) = 24
	2017	hom(:,2,24,:) = hom(:,2,10,:)
	2018	data_output_pr(i) = data_output_pr(i)(2:)
	2019	ENDIF
	2020
	2021	CASE ( 'l', '#l' )
	2022	dopr_index(i) = 11
[87]	2023	dopr_unit(i) = 'm'
[1]	2024	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2025	hom(nzb,2,11,:) = 0.0
	2026	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2027	dopr_initial_index(i) = 25
	2028	hom(:,2,25,:) = hom(:,2,11,:)
	2029	data_output_pr(i) = data_output_pr(i)(2:)
	2030	ENDIF
	2031
	2032	CASE ( 'w"u"' )
	2033	dopr_index(i) = 12
[87]	2034	dopr_unit(i) = 'm2/s2'
[1]	2035	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2036	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2037
	2038	CASE ( 'wu' )
	2039	dopr_index(i) = 13
[87]	2040	dopr_unit(i) = 'm2/s2'
[1]	2041	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2042
	2043	CASE ( 'w"v"' )
	2044	dopr_index(i) = 14
[87]	2045	dopr_unit(i) = 'm2/s2'
[1]	2046	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2047	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2048
	2049	CASE ( 'wv' )
	2050	dopr_index(i) = 15
[87]	2051	dopr_unit(i) = 'm2/s2'
[1]	2052	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2053
	2054	CASE ( 'w"pt"' )
	2055	dopr_index(i) = 16
[87]	2056	dopr_unit(i) = 'K m/s'
[1]	2057	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2058
	2059	CASE ( 'wpt' )
	2060	dopr_index(i) = 17
[87]	2061	dopr_unit(i) = 'K m/s'
[1]	2062	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2063
	2064	CASE ( 'wpt' )
	2065	dopr_index(i) = 18
[87]	2066	dopr_unit(i) = 'K m/s'
[1]	2067	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2068
	2069	CASE ( 'wu' )
	2070	dopr_index(i) = 19
[87]	2071	dopr_unit(i) = 'm2/s2'
[1]	2072	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2073	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2074
	2075	CASE ( 'wv' )
	2076	dopr_index(i) = 20
[87]	2077	dopr_unit(i) = 'm2/s2'
[1]	2078	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2079	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2080
	2081	CASE ( 'wptBC' )
	2082	dopr_index(i) = 21
[87]	2083	dopr_unit(i) = 'K m/s'
[1]	2084	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2085
	2086	CASE ( 'wptBC' )
	2087	dopr_index(i) = 22
[87]	2088	dopr_unit(i) = 'K m/s'
[1]	2089	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2090
[96]	2091	CASE ( 'sa', '#sa' )
	2092	IF ( .NOT. ocean ) THEN
[215]	2093	message_string = 'data_output_pr = ' // &
	2094	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2095	'lemented for ocean = .FALSE.'
[226]	2096	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2097	ELSE
	2098	dopr_index(i) = 23
	2099	dopr_unit(i) = 'psu'
	2100	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2101	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2102	dopr_initial_index(i) = 26
	2103	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2104	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2105	data_output_pr(i) = data_output_pr(i)(2:)
	2106	ENDIF
	2107	ENDIF
	2108
[1]	2109	CASE ( 'u*2' )
	2110	dopr_index(i) = 30
[87]	2111	dopr_unit(i) = 'm2/s2'
[1]	2112	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2113
	2114	CASE ( 'v*2' )
	2115	dopr_index(i) = 31
[87]	2116	dopr_unit(i) = 'm2/s2'
[1]	2117	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2118
	2119	CASE ( 'w*2' )
	2120	dopr_index(i) = 32
[87]	2121	dopr_unit(i) = 'm2/s2'
[1]	2122	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2123
	2124	CASE ( 'pt*2' )
	2125	dopr_index(i) = 33
[87]	2126	dopr_unit(i) = 'K2'
[1]	2127	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2128
	2129	CASE ( 'e*' )
	2130	dopr_index(i) = 34
[87]	2131	dopr_unit(i) = 'm2/s2'
[1]	2132	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2133
	2134	CASE ( 'w2pt' )
	2135	dopr_index(i) = 35
[87]	2136	dopr_unit(i) = 'K m2/s2'
[1]	2137	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2138
	2139	CASE ( 'wpt2' )
	2140	dopr_index(i) = 36
[87]	2141	dopr_unit(i) = 'K2 m/s'
[1]	2142	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2143
	2144	CASE ( 'we' )
	2145	dopr_index(i) = 37
[87]	2146	dopr_unit(i) = 'm3/s3'
[1]	2147	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2148
	2149	CASE ( 'w*3' )
	2150	dopr_index(i) = 38
[87]	2151	dopr_unit(i) = 'm3/s3'
[1]	2152	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2153
	2154	CASE ( 'Sw' )
	2155	dopr_index(i) = 39
[89]	2156	dopr_unit(i) = 'none'
[1]	2157	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2158
[232]	2159	CASE ( 'p' )
	2160	dopr_index(i) = 40
	2161	dopr_unit(i) = 'Pa'
	2162	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2163
[1]	2164	CASE ( 'q', '#q' )
[108]	2165	IF ( .NOT. humidity ) THEN
[215]	2166	message_string = 'data_output_pr = ' // &
	2167	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2168	'lemented for humidity = .FALSE.'
[226]	2169	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2170	ELSE
	2171	dopr_index(i) = 41
[87]	2172	dopr_unit(i) = 'kg/kg'
	2173	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2174	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2175	dopr_initial_index(i) = 26
	2176	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2177	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2178	data_output_pr(i) = data_output_pr(i)(2:)
	2179	ENDIF
	2180	ENDIF
	2181
	2182	CASE ( 's', '#s' )
	2183	IF ( .NOT. passive_scalar ) THEN
[215]	2184	message_string = 'data_output_pr = ' // &
	2185	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2186	'lemented for passive_scalar = .FALSE.'
[226]	2187	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2188	ELSE
	2189	dopr_index(i) = 41
[87]	2190	dopr_unit(i) = 'kg/m3'
	2191	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2192	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2193	dopr_initial_index(i) = 26
	2194	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2195	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2196	data_output_pr(i) = data_output_pr(i)(2:)
	2197	ENDIF
	2198	ENDIF
	2199
	2200	CASE ( 'qv', '#qv' )
	2201	IF ( .NOT. cloud_physics ) THEN
	2202	dopr_index(i) = 41
[87]	2203	dopr_unit(i) = 'kg/kg'
	2204	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2205	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2206	dopr_initial_index(i) = 26
	2207	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2208	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2209	data_output_pr(i) = data_output_pr(i)(2:)
	2210	ENDIF
	2211	ELSE
	2212	dopr_index(i) = 42
[87]	2213	dopr_unit(i) = 'kg/kg'
	2214	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2215	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2216	dopr_initial_index(i) = 27
	2217	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2218	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2219	data_output_pr(i) = data_output_pr(i)(2:)
	2220	ENDIF
	2221	ENDIF
	2222
	2223	CASE ( 'lpt', '#lpt' )
	2224	IF ( .NOT. cloud_physics ) THEN
[215]	2225	message_string = 'data_output_pr = ' // &
	2226	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2227	'lemented for cloud_physics = .FALSE.'
[226]	2228	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2229	ELSE
	2230	dopr_index(i) = 4
[87]	2231	dopr_unit(i) = 'K'
[1]	2232	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2233	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2234	dopr_initial_index(i) = 7
	2235	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2236	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2237	data_output_pr(i) = data_output_pr(i)(2:)
	2238	ENDIF
	2239	ENDIF
	2240
	2241	CASE ( 'vpt', '#vpt' )
	2242	dopr_index(i) = 44
[87]	2243	dopr_unit(i) = 'K'
	2244	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2245	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2246	dopr_initial_index(i) = 29
	2247	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2248	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2249	data_output_pr(i) = data_output_pr(i)(2:)
	2250	ENDIF
	2251
	2252	CASE ( 'w"vpt"' )
	2253	dopr_index(i) = 45
[87]	2254	dopr_unit(i) = 'K m/s'
[1]	2255	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2256
	2257	CASE ( 'wvpt' )
	2258	dopr_index(i) = 46
[87]	2259	dopr_unit(i) = 'K m/s'
[1]	2260	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2261
	2262	CASE ( 'wvpt' )
	2263	dopr_index(i) = 47
[87]	2264	dopr_unit(i) = 'K m/s'
[1]	2265	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2266
	2267	CASE ( 'w"q"' )
[108]	2268	IF ( .NOT. humidity ) THEN
[215]	2269	message_string = 'data_output_pr = ' // &
	2270	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2271	'lemented for humidity = .FALSE.'
[226]	2272	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2273	ELSE
	2274	dopr_index(i) = 48
[87]	2275	dopr_unit(i) = 'kg/kg m/s'
[1]	2276	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2277	ENDIF
	2278
	2279	CASE ( 'wq' )
[108]	2280	IF ( .NOT. humidity ) THEN
[215]	2281	message_string = 'data_output_pr = ' // &
	2282	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2283	'lemented for humidity = .FALSE.'
[226]	2284	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2285	ELSE
	2286	dopr_index(i) = 49
[87]	2287	dopr_unit(i) = 'kg/kg m/s'
[1]	2288	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2289	ENDIF
	2290
	2291	CASE ( 'wq' )
[108]	2292	IF ( .NOT. humidity ) THEN
[215]	2293	message_string = 'data_output_pr = ' // &
	2294	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2295	'lemented for humidity = .FALSE.'
[226]	2296	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2297	ELSE
	2298	dopr_index(i) = 50
[87]	2299	dopr_unit(i) = 'kg/kg m/s'
[1]	2300	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2301	ENDIF
	2302
	2303	CASE ( 'w"s"' )
	2304	IF ( .NOT. passive_scalar ) THEN
[215]	2305	message_string = 'data_output_pr = ' // &
	2306	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2307	'lemented for passive_scalar = .FALSE.'
[226]	2308	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2309	ELSE
	2310	dopr_index(i) = 48
[87]	2311	dopr_unit(i) = 'kg/m3 m/s'
[1]	2312	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2313	ENDIF
	2314
	2315	CASE ( 'ws' )
	2316	IF ( .NOT. passive_scalar ) THEN
[215]	2317	message_string = 'data_output_pr = ' // &
	2318	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2319	'lemented for passive_scalar = .FALSE.'
[226]	2320	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2321	ELSE
	2322	dopr_index(i) = 49
[87]	2323	dopr_unit(i) = 'kg/m3 m/s'
[1]	2324	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2325	ENDIF
	2326
	2327	CASE ( 'ws' )
	2328	IF ( .NOT. passive_scalar ) THEN
[215]	2329	message_string = 'data_output_pr = ' // &
	2330	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2331	'lemented for passive_scalar = .FALSE.'
[226]	2332	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2333	ELSE
	2334	dopr_index(i) = 50
[87]	2335	dopr_unit(i) = 'kg/m3 m/s'
[1]	2336	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2337	ENDIF
	2338
	2339	CASE ( 'w"qv"' )
[75]	2340	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2341	THEN
	2342	dopr_index(i) = 48
[87]	2343	dopr_unit(i) = 'kg/kg m/s'
[1]	2344	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2345	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2346	dopr_index(i) = 51
[87]	2347	dopr_unit(i) = 'kg/kg m/s'
[1]	2348	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2349	ELSE
[215]	2350	message_string = 'data_output_pr = ' // &
	2351	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2352	'lemented for cloud_physics = .FALSE. an&' // &
	2353	'd humidity = .FALSE.'
[226]	2354	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2355	ENDIF
	2356
	2357	CASE ( 'wqv' )
[75]	2358	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2359	THEN
	2360	dopr_index(i) = 49
[87]	2361	dopr_unit(i) = 'kg/kg m/s'
[1]	2362	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2363	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2364	dopr_index(i) = 52
[87]	2365	dopr_unit(i) = 'kg/kg m/s'
[1]	2366	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2367	ELSE
[215]	2368	message_string = 'data_output_pr = ' // &
	2369	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2370	'lemented for cloud_physics = .FALSE. an&' // &
	2371	'd humidity = .FALSE.'
[226]	2372	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2373	ENDIF
	2374
	2375	CASE ( 'wqv' )
[75]	2376	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2377	THEN
	2378	dopr_index(i) = 50
[87]	2379	dopr_unit(i) = 'kg/kg m/s'
[1]	2380	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2381	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2382	dopr_index(i) = 53
[87]	2383	dopr_unit(i) = 'kg/kg m/s'
[1]	2384	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2385	ELSE
[215]	2386	message_string = 'data_output_pr = ' // &
	2387	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2388	'lemented for cloud_physics = .FALSE. an&' // &
	2389	'd humidity = .FALSE.'
[226]	2390	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2391	ENDIF
	2392
	2393	CASE ( 'ql' )
	2394	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2395	message_string = 'data_output_pr = ' // &
	2396	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2397	'lemented for cloud_physics = .FALSE. or' // &
	2398	'&cloud_droplets = .FALSE.'
[226]	2399	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2400	ELSE
	2401	dopr_index(i) = 54
[87]	2402	dopr_unit(i) = 'kg/kg'
[1]	2403	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2404	ENDIF
	2405
[524]	2406	CASE ( 'wuu*:dz' )
[1]	2407	dopr_index(i) = 55
[87]	2408	dopr_unit(i) = 'm2/s3'
[1]	2409	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2410
[524]	2411	CASE ( 'wp:dz' )
[1]	2412	dopr_index(i) = 56
[87]	2413	dopr_unit(i) = 'm2/s3'
[106]	2414	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2415
[524]	2416	CASE ( 'w"e:dz' )
[1]	2417	dopr_index(i) = 57
[87]	2418	dopr_unit(i) = 'm2/s3'
[1]	2419	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2420
[667]	2421
[1]	2422	CASE ( 'u"pt"' )
	2423	dopr_index(i) = 58
[87]	2424	dopr_unit(i) = 'K m/s'
[1]	2425	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2426
	2427	CASE ( 'upt' )
	2428	dopr_index(i) = 59
[87]	2429	dopr_unit(i) = 'K m/s'
[1]	2430	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2431
	2432	CASE ( 'upt_t' )
	2433	dopr_index(i) = 60
[87]	2434	dopr_unit(i) = 'K m/s'
[1]	2435	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2436
	2437	CASE ( 'v"pt"' )
	2438	dopr_index(i) = 61
[87]	2439	dopr_unit(i) = 'K m/s'
[1]	2440	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2441
	2442	CASE ( 'vpt' )
	2443	dopr_index(i) = 62
[87]	2444	dopr_unit(i) = 'K m/s'
[1]	2445	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2446
	2447	CASE ( 'vpt_t' )
	2448	dopr_index(i) = 63
[87]	2449	dopr_unit(i) = 'K m/s'
[1]	2450	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2451
[96]	2452	CASE ( 'rho' )
[388]	2453	IF ( .NOT. ocean ) THEN
	2454	message_string = 'data_output_pr = ' // &
	2455	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2456	'lemented for ocean = .FALSE.'
	2457	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2458	ELSE
	2459	dopr_index(i) = 64
	2460	dopr_unit(i) = 'kg/m3'
	2461	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2462	ENDIF
[1]	2463
[96]	2464	CASE ( 'w"sa"' )
	2465	IF ( .NOT. ocean ) THEN
[215]	2466	message_string = 'data_output_pr = ' // &
	2467	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2468	'lemented for ocean = .FALSE.'
[226]	2469	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2470	ELSE
	2471	dopr_index(i) = 65
	2472	dopr_unit(i) = 'psu m/s'
	2473	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2474	ENDIF
	2475
	2476	CASE ( 'wsa' )
	2477	IF ( .NOT. ocean ) THEN
[215]	2478	message_string = 'data_output_pr = ' // &
	2479	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2480	'lemented for ocean = .FALSE.'
[226]	2481	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2482	ELSE
	2483	dopr_index(i) = 66
	2484	dopr_unit(i) = 'psu m/s'
	2485	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2486	ENDIF
	2487
	2488	CASE ( 'wsa' )
	2489	IF ( .NOT. ocean ) THEN
[215]	2490	message_string = 'data_output_pr = ' // &
	2491	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2492	'lemented for ocean = .FALSE.'
[226]	2493	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2494	ELSE
	2495	dopr_index(i) = 67
	2496	dopr_unit(i) = 'psu m/s'
	2497	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2498	ENDIF
	2499
[106]	2500	CASE ( 'wp' )
	2501	dopr_index(i) = 68
	2502	dopr_unit(i) = 'm3/s3'
	2503	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2504
[106]	2505	CASE ( 'w"e' )
	2506	dopr_index(i) = 69
	2507	dopr_unit(i) = 'm3/s3'
	2508	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2509
[197]	2510	CASE ( 'q*2' )
	2511	IF ( .NOT. humidity ) THEN
[215]	2512	message_string = 'data_output_pr = ' // &
	2513	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2514	'lemented for humidity = .FALSE.'
[226]	2515	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2516	ELSE
	2517	dopr_index(i) = 70
	2518	dopr_unit(i) = 'kg2/kg2'
	2519	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2520	ENDIF
[106]	2521
[388]	2522	CASE ( 'prho' )
	2523	IF ( .NOT. ocean ) THEN
	2524	message_string = 'data_output_pr = ' // &
	2525	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2526	'lemented for ocean = .FALSE.'
	2527	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2528	ELSE
	2529	dopr_index(i) = 71
	2530	dopr_unit(i) = 'kg/m3'
	2531	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2532	ENDIF
	2533
	2534	CASE ( 'hyp' )
	2535	dopr_index(i) = 72
[531]	2536	dopr_unit(i) = 'dbar'
[388]	2537	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2538
[1053]	2539	CASE ( 'nr' )
	2540	IF ( .NOT. cloud_physics ) THEN
	2541	message_string = 'data_output_pr = ' // &
	2542	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2543	'lemented for cloud_physics = .FALSE.'
	2544	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2545	ELSEIF ( icloud_scheme /= 0 ) THEN
	2546	message_string = 'data_output_pr = ' // &
	2547	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2548	'lemented for cloud_scheme /= seifert_beheng'
	2549	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2550	ELSEIF ( .NOT. precipitation ) THEN
	2551	message_string = 'data_output_pr = ' // &
	2552	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2553	'lemented for precipitation = .FALSE.'
	2554	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2555	ELSE
	2556	dopr_index(i) = 73
	2557	dopr_unit(i) = '1/m3'
	2558	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2559	ENDIF
	2560
	2561	CASE ( 'qr' )
	2562	IF ( .NOT. cloud_physics ) THEN
	2563	message_string = 'data_output_pr = ' // &
	2564	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2565	'lemented for cloud_physics = .FALSE.'
	2566	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2567	ELSEIF ( icloud_scheme /= 0 ) THEN
	2568	message_string = 'data_output_pr = ' // &
	2569	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2570	'lemented for cloud_scheme /= seifert_beheng'
	2571	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
[1115]	2572	ELSEIF ( .NOT. precipitation ) THEN
	2573	message_string = 'data_output_pr = ' // &
	2574	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2575	'lemented for precipitation = .FALSE.'
	2576	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
[1053]	2577	ELSE
	2578	dopr_index(i) = 74
	2579	dopr_unit(i) = 'kg/kg'
	2580	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2581	ENDIF
	2582
	2583	CASE ( 'qc' )
	2584	IF ( .NOT. cloud_physics ) THEN
	2585	message_string = 'data_output_pr = ' // &
	2586	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2587	'lemented for cloud_physics = .FALSE.'
	2588	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2589	ELSEIF ( icloud_scheme /= 0 ) THEN
	2590	message_string = 'data_output_pr = ' // &
	2591	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2592	'lemented for cloud_scheme /= seifert_beheng'
	2593	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2594	ELSE
	2595	dopr_index(i) = 75
	2596	dopr_unit(i) = 'kg/kg'
	2597	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2598	ENDIF
	2599
	2600	CASE ( 'prr' )
	2601	IF ( .NOT. cloud_physics ) THEN
	2602	message_string = 'data_output_pr = ' // &
	2603	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2604	'lemented for cloud_physics = .FALSE.'
	2605	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2606	ELSEIF ( icloud_scheme /= 0 ) THEN
	2607	message_string = 'data_output_pr = ' // &
	2608	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2609	'lemented for cloud_scheme /= seifert_beheng'
	2610	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2611	ELSEIF ( .NOT. precipitation ) THEN
	2612	message_string = 'data_output_pr = ' // &
	2613	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2614	'lemented for precipitation = .FALSE.'
	2615	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2616
	2617	ELSE
	2618	dopr_index(i) = 76
	2619	dopr_unit(i) = 'kg/kg m/s'
	2620	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2621	ENDIF
	2622
[1]	2623	CASE DEFAULT
[87]	2624
	2625	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2626
	2627	IF ( unit == 'illegal' ) THEN
[215]	2628	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2629	message_string = 'illegal value for data_output_pr or ' // &
	2630	'data_output_pr_user = "' // &
	2631	TRIM( data_output_pr(i) ) // '"'
[226]	2632	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2633	ELSE
	2634	message_string = 'illegal value for data_output_pr = "' // &
	2635	TRIM( data_output_pr(i) ) // '"'
[226]	2636	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2637	ENDIF
[1]	2638	ENDIF
	2639
	2640	END SELECT
[667]	2641
[1]	2642	ENDDO
	2643
	2644
	2645	!
	2646	!-- Append user-defined data output variables to the standard data output
	2647	IF ( data_output_user(1) /= ' ' ) THEN
	2648	i = 1
	2649	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2650	i = i + 1
	2651	ENDDO
	2652	j = 1
	2653	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2654	IF ( i > 100 ) THEN
[215]	2655	message_string = 'number of output quantitities given by data' // &
	2656	'_output and data_output_user exceeds the limit of 100'
[226]	2657	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2658	ENDIF
	2659	data_output(i) = data_output_user(j)
	2660	i = i + 1
	2661	j = j + 1
	2662	ENDDO
	2663	ENDIF
	2664
	2665	!
	2666	!-- Check and set steering parameters for 2d/3d data output and averaging
	2667	i = 1
	2668	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2669	!
	2670	!-- Check for data averaging
	2671	ilen = LEN_TRIM( data_output(i) )
	2672	j = 0 ! no data averaging
	2673	IF ( ilen > 3 ) THEN
	2674	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2675	j = 1 ! data averaging
	2676	data_output(i) = data_output(i)(1:ilen-3)
	2677	ENDIF
	2678	ENDIF
	2679	!
	2680	!-- Check for cross section or volume data
	2681	ilen = LEN_TRIM( data_output(i) )
	2682	k = 0 ! 3d data
	2683	var = data_output(i)(1:ilen)
	2684	IF ( ilen > 3 ) THEN
	2685	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2686	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2687	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2688	k = 1 ! 2d data
	2689	var = data_output(i)(1:ilen-3)
	2690	ENDIF
	2691	ENDIF
	2692	!
	2693	!-- Check for allowed value and set units
	2694	SELECT CASE ( TRIM( var ) )
	2695
	2696	CASE ( 'e' )
	2697	IF ( constant_diffusion ) THEN
[215]	2698	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2699	'res constant_diffusion = .FALSE.'
[226]	2700	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2701	ENDIF
	2702	unit = 'm2/s2'
	2703
[771]	2704	CASE ( 'lpt' )
	2705	IF ( .NOT. cloud_physics ) THEN
	2706	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2707	'res cloud_physics = .TRUE.'
	2708	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2709	ENDIF
	2710	unit = 'K'
	2711
[1053]	2712	CASE ( 'nr' )
	2713	IF ( .NOT. cloud_physics ) THEN
	2714	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2715	'res cloud_physics = .TRUE.'
	2716	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2717	ELSEIF ( icloud_scheme /= 0 ) THEN
	2718	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2719	'res cloud_scheme = seifert_beheng'
	2720	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2721	ENDIF
	2722	unit = '1/m3'
	2723
[1]	2724	CASE ( 'pc', 'pr' )
	2725	IF ( .NOT. particle_advection ) THEN
[215]	2726	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2727	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2728	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2729	ENDIF
	2730	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2731	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2732
[1053]	2733	CASE ( 'prr' )
	2734	IF ( .NOT. cloud_physics ) THEN
	2735	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2736	'res cloud_physics = .TRUE.'
	2737	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2738	ELSEIF ( icloud_scheme /= 0 ) THEN
	2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2740	'res cloud_scheme = seifert_beheng'
	2741	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2742	ELSEIF ( .NOT. precipitation ) THEN
	2743	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2744	'res precipitation = .TRUE.'
	2745	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2746	ENDIF
	2747	unit = 'kg/kg m/s'
	2748
[1]	2749	CASE ( 'q', 'vpt' )
[75]	2750	IF ( .NOT. humidity ) THEN
[215]	2751	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2752	'res humidity = .TRUE.'
[226]	2753	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2754	ENDIF
	2755	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2756	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2757
[1053]	2758	CASE ( 'qc' )
	2759	IF ( .NOT. cloud_physics ) THEN
	2760	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2761	'res cloud_physics = .TRUE.'
	2762	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2763	ELSEIF ( icloud_scheme /= 0 ) THEN
	2764	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2765	'res cloud_scheme = seifert_beheng'
	2766	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2767	ENDIF
	2768	unit = 'kg/kg'
	2769
[1]	2770	CASE ( 'ql' )
	2771	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2772	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2773	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2774	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2775	ENDIF
	2776	unit = 'kg/kg'
	2777
	2778	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2779	IF ( .NOT. cloud_droplets ) THEN
[215]	2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2781	'res cloud_droplets = .TRUE.'
[226]	2782	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2783	ENDIF
	2784	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2785	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2786	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2787
[1053]	2788	CASE ( 'qr' )
	2789	IF ( .NOT. cloud_physics ) THEN
	2790	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2791	'res cloud_physics = .TRUE.'
	2792	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2793	ELSEIF ( icloud_scheme /= 0 ) THEN
	2794	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2795	'res cloud_scheme = seifert_beheng'
	2796	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
[1115]	2797	ELSEIF ( .NOT. precipitation ) THEN
	2798	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2799	'res precipitation = .TRUE.'
	2800	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[1053]	2801	ENDIF
	2802	unit = 'kg/kg'
	2803
[1]	2804	CASE ( 'qv' )
	2805	IF ( .NOT. cloud_physics ) THEN
[215]	2806	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2807	'res cloud_physics = .TRUE.'
[226]	2808	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2809	ENDIF
	2810	unit = 'kg/kg'
	2811
[96]	2812	CASE ( 'rho' )
	2813	IF ( .NOT. ocean ) THEN
[215]	2814	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2815	'res ocean = .TRUE.'
[226]	2816	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2817	ENDIF
	2818	unit = 'kg/m3'
	2819
[1]	2820	CASE ( 's' )
	2821	IF ( .NOT. passive_scalar ) THEN
[215]	2822	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2823	'res passive_scalar = .TRUE.'
[226]	2824	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2825	ENDIF
	2826	unit = 'conc'
	2827
[96]	2828	CASE ( 'sa' )
	2829	IF ( .NOT. ocean ) THEN
[215]	2830	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2831	'res ocean = .TRUE.'
[226]	2832	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2833	ENDIF
	2834	unit = 'psu'
	2835
[978]	2836	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2837	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2838	message_string = 'illegal value for data_output: "' // &
	2839	TRIM( var ) // '" & only 2d-horizontal ' // &
	2840	'cross sections are allowed for this value'
[226]	2841	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2842	ENDIF
	2843	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2845	'res cloud_physics = .TRUE.'
[226]	2846	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2847	ENDIF
[72]	2848	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2849	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2850	'res precipitation = .TRUE.'
[226]	2851	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2852	ENDIF
	2853	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2854	message_string = 'temporal averaging of precipitation ' // &
	2855	'amount "' // TRIM( var ) // '" is not possible'
[226]	2856	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2857	ENDIF
	2858	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2860	'res precipitation = .TRUE.'
[226]	2861	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2862	ENDIF
[354]	2863	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2864	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2865	'res humidity = .TRUE.'
	2866	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2867	ENDIF
[72]	2868
[354]	2869	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2870	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2871	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2872	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2873	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2874	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2875	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2876	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2877	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2878
[1]	2879
	2880	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2881	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2882	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2883	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2884	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2885	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2886	CONTINUE
	2887
	2888	CASE DEFAULT
	2889	CALL user_check_data_output( var, unit )
	2890
	2891	IF ( unit == 'illegal' ) THEN
[215]	2892	IF ( data_output_user(1) /= ' ' ) THEN
	2893	message_string = 'illegal value for data_output or ' // &
	2894	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2895	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2896	ELSE
	2897	message_string = 'illegal value for data_output =' // &
	2898	TRIM( data_output(i) ) // '"'
[226]	2899	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2900	ENDIF
	2901	ENDIF
	2902
	2903	END SELECT
	2904	!
	2905	!-- Set the internal steering parameters appropriately
	2906	IF ( k == 0 ) THEN
	2907	do3d_no(j) = do3d_no(j) + 1
	2908	do3d(j,do3d_no(j)) = data_output(i)
	2909	do3d_unit(j,do3d_no(j)) = unit
	2910	ELSE
	2911	do2d_no(j) = do2d_no(j) + 1
	2912	do2d(j,do2d_no(j)) = data_output(i)
	2913	do2d_unit(j,do2d_no(j)) = unit
	2914	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2915	data_output_xy(j) = .TRUE.
	2916	ENDIF
	2917	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2918	data_output_xz(j) = .TRUE.
	2919	ENDIF
	2920	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2921	data_output_yz(j) = .TRUE.
	2922	ENDIF
	2923	ENDIF
	2924
	2925	IF ( j == 1 ) THEN
	2926	!
	2927	!-- Check, if variable is already subject to averaging
	2928	found = .FALSE.
	2929	DO k = 1, doav_n
	2930	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2931	ENDDO
	2932
	2933	IF ( .NOT. found ) THEN
	2934	doav_n = doav_n + 1
	2935	doav(doav_n) = var
	2936	ENDIF
	2937	ENDIF
	2938
	2939	i = i + 1
	2940	ENDDO
	2941
	2942	!
[376]	2943	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2944	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2945	WRITE( message_string, * ) 'output of averaged quantity "', &
	2946	TRIM( doav(1) ), '_av" requires to set a ', &
	2947	'non-zero & averaging interval'
	2948	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2949	ENDIF
	2950
	2951	!
[308]	2952	!-- Check sectional planes and store them in one shared array
	2953	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2954	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2955	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2956	ENDIF
	2957	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2958	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2959	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2960	ENDIF
	2961	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2962	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2963	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2964	ENDIF
[1]	2965	section(:,1) = section_xy
	2966	section(:,2) = section_xz
	2967	section(:,3) = section_yz
	2968
	2969	!
	2970	!-- Upper plot limit for 2D vertical sections
	2971	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2972	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2973	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2974	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2975	' (zu(nzt))'
[226]	2976	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2977	ENDIF
	2978
	2979	!
	2980	!-- Upper plot limit for 3D arrays
	2981	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2982
	2983	!
	2984	!-- Determine and check accuracy for compressed 3D plot output
	2985	IF ( do3d_compress ) THEN
	2986	!
	2987	!-- Compression only permissible on T3E machines
	2988	IF ( host(1:3) /= 't3e' ) THEN
[215]	2989	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2990	TRIM( host ) // '"'
[226]	2991	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2992	ENDIF
	2993
	2994	i = 1
	2995	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2996
	2997	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2998	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2999	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3000	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3001	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3002	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3003	ENDIF
	3004
	3005	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3006	var = do3d_comp_prec(i)(1:ilen-1)
	3007
	3008	SELECT CASE ( var )
	3009
	3010	CASE ( 'u' )
	3011	j = 1
	3012	CASE ( 'v' )
	3013	j = 2
	3014	CASE ( 'w' )
	3015	j = 3
	3016	CASE ( 'p' )
	3017	j = 4
	3018	CASE ( 'pt' )
	3019	j = 5
	3020
	3021	CASE DEFAULT
[215]	3022	WRITE( message_string, * ) 'unknown variable "', &
	3023	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3024	i, ')'
[226]	3025	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3026
	3027	END SELECT
	3028
	3029	plot_3d_precision(j)%precision = prec
	3030	i = i + 1
	3031
	3032	ENDDO
	3033	ENDIF
	3034
	3035	!
	3036	!-- Check the data output format(s)
	3037	IF ( data_output_format(1) == ' ' ) THEN
	3038	!
	3039	!-- Default value
	3040	netcdf_output = .TRUE.
	3041	ELSE
	3042	i = 1
	3043	DO WHILE ( data_output_format(i) /= ' ' )
	3044
	3045	SELECT CASE ( data_output_format(i) )
	3046
	3047	CASE ( 'netcdf' )
	3048	netcdf_output = .TRUE.
	3049	CASE ( 'iso2d' )
	3050	iso2d_output = .TRUE.
	3051	CASE ( 'avs' )
	3052	avs_output = .TRUE.
	3053
	3054	CASE DEFAULT
[215]	3055	message_string = 'unknown value for data_output_format "' // &
	3056	TRIM( data_output_format(i) ) // '"'
[226]	3057	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3058
	3059	END SELECT
	3060
	3061	i = i + 1
	3062	IF ( i > 10 ) EXIT
	3063
	3064	ENDDO
[1031]	3065	ENDIF
[1]	3066
[1031]	3067	!
	3068	!-- Set output format string (used in header)
	3069	IF ( netcdf_output ) THEN
	3070
	3071	SELECT CASE ( netcdf_data_format )
	3072	CASE ( 1 )
	3073	output_format_netcdf = 'netCDF classic'
	3074	CASE ( 2 )
	3075	output_format_netcdf = 'netCDF 64bit offset'
	3076	CASE ( 3 )
	3077	output_format_netcdf = 'netCDF4/HDF5'
	3078	CASE ( 4 )
	3079	output_format_netcdf = 'netCDF4/HDF5 classic'
	3080	CASE ( 5 )
	3081	output_format_netcdf = 'parallel netCDF4/HDF5'
	3082	CASE ( 6 )
	3083	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3084
	3085	END SELECT
	3086
[1]	3087	ENDIF
	3088
	3089	!
[410]	3090	!-- Check mask conditions
[553]	3091	DO mid = 1, max_masks
[567]	3092	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3093	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3094	masks = masks + 1
	3095	ENDIF
	3096	ENDDO
	3097
[410]	3098	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3099	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3100	'<= ', max_masks, ' (=max_masks)'
[564]	3101	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3102	ENDIF
	3103	IF ( masks > 0 ) THEN
	3104	mask_scale(1) = mask_scale_x
	3105	mask_scale(2) = mask_scale_y
	3106	mask_scale(3) = mask_scale_z
	3107	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3108	WRITE( message_string, * ) &
	3109	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3110	'must be > 0.0'
[564]	3111	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3112	ENDIF
	3113	!
	3114	!-- Generate masks for masked data output
	3115	CALL init_masks
	3116	ENDIF
	3117
	3118	!
[493]	3119	!-- Check the NetCDF data format
[924]	3120	#if ! defined ( __check )
[1034]	3121	IF ( netcdf_data_format > 2 ) THEN
[924]	3122	#if defined( __netcdf4 )
[493]	3123	CONTINUE
	3124	#else
[1031]	3125	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3126	'cpp-directive __netcdf4 given & switch ' // &
	3127	'back to 64-bit offset format'
	3128	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3129	netcdf_data_format = 2
	3130	#endif
	3131	ENDIF
[1031]	3132	IF ( netcdf_data_format > 4 ) THEN
	3133	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3134	CONTINUE
	3135	#else
	3136	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3137	'cpp-directive __netcdf4_parallel given & switch ' // &
	3138	'back to netCDF4 non-parallel output'
	3139	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3140	netcdf_data_format = netcdf_data_format - 2
[892]	3141	#endif
[1031]	3142	ENDIF
	3143	#endif
[667]	3144
[809]	3145	#if ! defined( __check )
[1031]	3146	!
[1]	3147	!-- Check netcdf precison
	3148	ldum = .FALSE.
	3149	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3150	#endif
[1]	3151	!
	3152	!-- Check, whether a constant diffusion coefficient shall be used
	3153	IF ( km_constant /= -1.0 ) THEN
	3154	IF ( km_constant < 0.0 ) THEN
[215]	3155	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3156	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3157	ELSE
	3158	IF ( prandtl_number < 0.0 ) THEN
[215]	3159	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3160	' < 0.0'
[226]	3161	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3162	ENDIF
	3163	constant_diffusion = .TRUE.
	3164
	3165	IF ( prandtl_layer ) THEN
[215]	3166	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3167	'value of km'
[226]	3168	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3169	ENDIF
	3170	ENDIF
	3171	ENDIF
	3172
	3173	!
[978]	3174	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3175	!-- potential temperature, check the width of the damping layer
[1]	3176	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3177	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3178	message_string = 'pt_damping_width out of range'
[226]	3179	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3180	ENDIF
	3181	ENDIF
	3182
	3183	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3184	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3185	message_string = 'pt_damping_width out of range'
[226]	3186	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3187	ENDIF
	3188	ENDIF
	3189
	3190	!
	3191	!-- Check value range for rif
	3192	IF ( rif_min >= rif_max ) THEN
[215]	3193	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3194	'than rif_max = ', rif_max
[226]	3195	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3196	ENDIF
	3197
	3198	!
	3199	!-- Determine upper and lower hight level indices for random perturbations
[97]	3200	IF ( disturbance_level_b == -9999999.9 ) THEN
	3201	IF ( ocean ) THEN
	3202	disturbance_level_b = zu((nzt*2)/3)
	3203	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3204	ELSE
	3205	disturbance_level_b = zu(nzb+3)
	3206	disturbance_level_ind_b = nzb + 3
	3207	ENDIF
[1]	3208	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3209	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3210	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3211	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3212	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3213	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3214	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3215	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3216	ELSE
	3217	DO k = 3, nzt-2
	3218	IF ( disturbance_level_b <= zu(k) ) THEN
	3219	disturbance_level_ind_b = k
	3220	EXIT
	3221	ENDIF
	3222	ENDDO
	3223	ENDIF
	3224
[97]	3225	IF ( disturbance_level_t == -9999999.9 ) THEN
	3226	IF ( ocean ) THEN
	3227	disturbance_level_t = zu(nzt-3)
	3228	disturbance_level_ind_t = nzt - 3
	3229	ELSE
	3230	disturbance_level_t = zu(nzt/3)
	3231	disturbance_level_ind_t = nzt / 3
	3232	ENDIF
[1]	3233	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3234	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3235	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3236	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3237	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3238	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3239	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3240	disturbance_level_b
[226]	3241	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3242	ELSE
	3243	DO k = 3, nzt-2
	3244	IF ( disturbance_level_t <= zu(k) ) THEN
	3245	disturbance_level_ind_t = k
	3246	EXIT
	3247	ENDIF
	3248	ENDDO
	3249	ENDIF
	3250
	3251	!
	3252	!-- Check again whether the levels determined this way are ok.
	3253	!-- Error may occur at automatic determination and too few grid points in
	3254	!-- z-direction.
	3255	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3256	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3257	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3258	disturbance_level_b
[226]	3259	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3260	ENDIF
	3261
	3262	!
	3263	!-- Determine the horizontal index range for random perturbations.
	3264	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3265	!-- near the inflow and the perturbation area is further limited to ...(1)
	3266	!-- after the initial phase of the flow.
	3267	dist_nxl = 0; dist_nxr = nx
	3268	dist_nys = 0; dist_nyn = ny
	3269	IF ( bc_lr /= 'cyclic' ) THEN
	3270	IF ( inflow_disturbance_begin == -1 ) THEN
	3271	inflow_disturbance_begin = MIN( 10, nx/2 )
	3272	ENDIF
	3273	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3274	THEN
[215]	3275	message_string = 'inflow_disturbance_begin out of range'
[226]	3276	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3277	ENDIF
	3278	IF ( inflow_disturbance_end == -1 ) THEN
	3279	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3280	ENDIF
	3281	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3282	THEN
[215]	3283	message_string = 'inflow_disturbance_end out of range'
[226]	3284	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3285	ENDIF
	3286	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3287	IF ( inflow_disturbance_begin == -1 ) THEN
	3288	inflow_disturbance_begin = MIN( 10, ny/2 )
	3289	ENDIF
	3290	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3291	THEN
[215]	3292	message_string = 'inflow_disturbance_begin out of range'
[226]	3293	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3294	ENDIF
	3295	IF ( inflow_disturbance_end == -1 ) THEN
	3296	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3297	ENDIF
	3298	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3299	THEN
[215]	3300	message_string = 'inflow_disturbance_end out of range'
[226]	3301	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3302	ENDIF
	3303	ENDIF
	3304
[1159]	3305	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3306	dist_nxr = nx - inflow_disturbance_begin
	3307	dist_nxl(1) = nx - inflow_disturbance_end
[1159]	3308	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3309	dist_nxl = inflow_disturbance_begin
	3310	dist_nxr(1) = inflow_disturbance_end
[73]	3311	ENDIF
[1159]	3312	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3313	dist_nyn = ny - inflow_disturbance_begin
	3314	dist_nys(1) = ny - inflow_disturbance_end
[1159]	3315	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3316	dist_nys = inflow_disturbance_begin
	3317	dist_nyn(1) = inflow_disturbance_end
	3318	ENDIF
	3319
	3320	!
[151]	3321	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3322	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[1159]	3323	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3324	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3325	'condition at the inflow boundary'
[226]	3326	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3327	ENDIF
	3328
	3329	!
[1060]	3330	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
[1103]	3331	!-- data from prerun in the first main run
	3332	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
	3333	initializing_actions /= 'read_restart_data' ) THEN
[1060]	3334	message_string = 'turbulent_inflow = .T. requires ' // &
	3335	'initializing_actions = ''cyclic_fill'' '
	3336	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3337	ENDIF
	3338
	3339	!
[151]	3340	!-- In case of turbulent inflow calculate the index of the recycling plane
	3341	IF ( turbulent_inflow ) THEN
	3342	IF ( recycling_width == 9999999.9 ) THEN
	3343	!
	3344	!-- Set the default value for the width of the recycling domain
	3345	recycling_width = 0.1 * nx * dx
	3346	ELSE
	3347	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3348	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3349	' ', recycling_width
[226]	3350	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3351	ENDIF
	3352	ENDIF
	3353	!
	3354	!-- Calculate the index
	3355	recycling_plane = recycling_width / dx
	3356	ENDIF
	3357
	3358	!
[1]	3359	!-- Check random generator
	3360	IF ( random_generator /= 'system-specific' .AND. &
	3361	random_generator /= 'numerical-recipes' ) THEN
[215]	3362	message_string = 'unknown random generator: random_generator = "' // &
	3363	TRIM( random_generator ) // '"'
[226]	3364	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3365	ENDIF
	3366
	3367	!
	3368	!-- Determine damping level index for 1D model
	3369	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3370	IF ( damp_level_1d == -1.0 ) THEN
	3371	damp_level_1d = zu(nzt+1)
	3372	damp_level_ind_1d = nzt + 1
	3373	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3374	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3375	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3376	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3377	ELSE
	3378	DO k = 1, nzt+1
	3379	IF ( damp_level_1d <= zu(k) ) THEN
	3380	damp_level_ind_1d = k
	3381	EXIT
	3382	ENDIF
	3383	ENDDO
	3384	ENDIF
	3385	ENDIF
[215]	3386
[1]	3387	!
	3388	!-- Check some other 1d-model parameters
	3389	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3390	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3391	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3392	'" is unknown'
[226]	3393	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3394	ENDIF
	3395	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3396	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3397	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3398	'" is unknown'
[226]	3399	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3400	ENDIF
	3401
	3402	!
	3403	!-- Set time for the next user defined restart (time_restart is the
	3404	!-- internal parameter for steering restart events)
	3405	IF ( restart_time /= 9999999.9 ) THEN
[291]	3406	IF ( restart_time > time_since_reference_point ) THEN
	3407	time_restart = restart_time
	3408	ENDIF
[1]	3409	ELSE
	3410	!
	3411	!-- In case of a restart run, set internal parameter to default (no restart)
	3412	!-- if the NAMELIST-parameter restart_time is omitted
	3413	time_restart = 9999999.9
	3414	ENDIF
	3415
	3416	!
	3417	!-- Set default value of the time needed to terminate a model run
	3418	IF ( termination_time_needed == -1.0 ) THEN
	3419	IF ( host(1:3) == 'ibm' ) THEN
	3420	termination_time_needed = 300.0
	3421	ELSE
	3422	termination_time_needed = 35.0
	3423	ENDIF
	3424	ENDIF
	3425
	3426	!
	3427	!-- Check the time needed to terminate a model run
	3428	IF ( host(1:3) == 't3e' ) THEN
	3429	!
	3430	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3431	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3432	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3433	WRITE( message_string, * ) 'termination_time_needed = ', &
	3434	termination_time_needed, ' must be > 30.0 on host "', &
	3435	TRIM( host ), '"'
[226]	3436	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3437	ENDIF
	3438	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3439	!
	3440	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3441	!-- because the job time consumed before executing palm (for compiling,
	3442	!-- copying of files, etc.) has to be regarded
	3443	IF ( termination_time_needed < 300.0 ) THEN
[215]	3444	WRITE( message_string, * ) 'termination_time_needed = ', &
	3445	termination_time_needed, ' should be >= 300.0 on host "', &
	3446	TRIM( host ), '"'
[226]	3447	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3448	ENDIF
	3449	ENDIF
	3450
[217]	3451	!
[240]	3452	!-- Check pressure gradient conditions
	3453	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3454	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3455	'w are .TRUE. but one of them must be .FALSE.'
[240]	3456	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3457	ENDIF
	3458	IF ( dp_external ) THEN
	3459	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3460	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3461	' of range'
	3462	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3463	ENDIF
	3464	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3465	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3466	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3467	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3468	ENDIF
	3469	ENDIF
	3470	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3471	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3472	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3473	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3474	ENDIF
[241]	3475	IF ( conserve_volume_flow ) THEN
	3476	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3477
	3478	conserve_volume_flow_mode = 'initial_profiles'
	3479
[241]	3480	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3481	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3482	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3483	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3484	conserve_volume_flow_mode
	3485	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3486	ENDIF
[667]	3487	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3488	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3489	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3490	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3491	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3492	ENDIF
	3493	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3494	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3495	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3496	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3497	' or ''bulk_velocity'''
	3498	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3499	ENDIF
	3500	ENDIF
	3501	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3502	( .NOT. conserve_volume_flow .OR. &
	3503	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3504	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3505	'conserve_volume_flow = .T. and ', &
[241]	3506	'conserve_volume_flow_mode = ''bulk_velocity'''
	3507	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3508	ENDIF
[240]	3509
	3510	!
[264]	3511	!-- Check particle attributes
	3512	IF ( particle_color /= 'none' ) THEN
	3513	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3514	particle_color /= 'z' ) THEN
	3515	message_string = 'illegal value for parameter particle_color: ' // &
	3516	TRIM( particle_color)
	3517	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3518	ELSE
	3519	IF ( color_interval(2) <= color_interval(1) ) THEN
	3520	message_string = 'color_interval(2) <= color_interval(1)'
	3521	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3522	ENDIF
	3523	ENDIF
	3524	ENDIF
	3525
	3526	IF ( particle_dvrpsize /= 'none' ) THEN
	3527	IF ( particle_dvrpsize /= 'absw' ) THEN
	3528	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3529	' ' // TRIM( particle_color)
	3530	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3531	ELSE
	3532	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3533	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3534	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3535	ENDIF
	3536	ENDIF
	3537	ENDIF
	3538
	3539	!
[217]	3540	!-- Check &userpar parameters
	3541	CALL user_check_parameters
[1]	3542
[217]	3543
[667]	3544
[1]	3545	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |