Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1034

Last change on this file since 1034 was 1031, checked in by raasch, 12 years ago
netCDF4 without parallel file support implemented additional define string netcdf4_parallel is required to switch on parallel file support
Property svn:keywords set to `Id`
File size: 45.1 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
[1031]	6	! netCDF4 without parallel file support implemented,
	7	! opening of netCDF files are done by new routines create_netcdf_file and
	8	! open_write_netcdf_file
[1]	9	!
	10	! Former revisions:
	11	! -----------------
[3]	12	! $Id: check_open.f90 1031 2012-10-19 14:35:30Z raasch $
[810]	13	!
[965]	14	! 964 2012-07-26 09:14:24Z raasch
	15	! old profil-units (40:49) removed,
	16	! append feature removed from unit 14
	17	!
[850]	18	! 849 2012-03-15 10:35:09Z raasch
	19	! comment changed
	20	!
[810]	21	! 809 2012-01-30 13:32:58Z maronga
	22	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	23	!
[808]	24	! 807 2012-01-25 11:53:51Z maronga
	25	! New cpp directive "__check" implemented which is used by check_namelist_files
	26	!
[766]	27	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	28	!
[668]	29	! 667 2010-12-23 12:06:00Z suehring/gryschka
	30	! Output of total array size was adapted to nbgp.
	31	!
[601]	32	! 600 2010-11-24 16:10:51Z raasch
	33	! bugfix in opening of cross section netcdf-files (parallel opening with
	34	! netcdf4 only works for netcdf_data_format > 2)
	35	!
[565]	36	! 564 2010-09-30 13:18:59Z helmke
	37	! start number of mask output files changed to 201, netcdf message identifiers
	38	! of masked output changed
	39	!
[520]	40	! 519 2010-03-19 05:30:02Z raasch
[1031]	41	! netCDF4 support for particle data
[520]	42	!
[494]	43	! 493 2010-03-01 08:30:24Z raasch
[1031]	44	! netCDF4 support (parallel output)
[494]	45	!
[449]	46	! 410 2009-12-04 17:05:40Z letzel
	47	! masked data output
	48	!
[392]	49	! 277 2009-03-31 09:13:47Z heinze
[1031]	50	! Output of netCDF messages with aid of message handling routine.
[392]	51	! Output of messages replaced by message handling routine
	52	!
[198]	53	! 146 2008-01-17 13:08:34Z raasch
	54	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	55	! because only this file contains the global variables,
	56	! myid_char_14 removed
	57	!
[139]	58	! 120 2007-10-17 11:54:43Z raasch
[1031]	59	! Status of 3D-volume netCDF data file only depends on switch netcdf_64bit_3d
[139]	60	!
[110]	61	! 105 2007-08-08 07:12:55Z raasch
	62	! Different filenames are used in case of a coupled simulation,
	63	! coupling_char added to all relevant filenames
	64	!
[83]	65	! 82 2007-04-16 15:40:52Z raasch
	66	! Call of local_getenv removed, preprocessor directives for old systems removed
	67	!
[77]	68	! 46 2007-03-05 06:00:47Z raasch
	69	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	70	!
[3]	71	! RCS Log replace by Id keyword, revision history cleaned up
	72	!
[1]	73	! Revision 1.44 2006/08/22 13:48:34 raasch
	74	! xz and yz cross sections now up to nzt+1
	75	!
	76	! Revision 1.1 1997/08/11 06:10:55 raasch
	77	! Initial revision
	78	!
	79	!
	80	! Description:
	81	! ------------
	82	! Check if file unit is open. If not, open file and, if necessary, write a
	83	! header or start other initializing actions, respectively.
	84	!------------------------------------------------------------------------------!
	85
	86	USE array_kind
	87	USE arrays_3d
	88	USE control_parameters
	89	USE grid_variables
	90	USE indices
	91	USE netcdf_control
	92	USE particle_attributes
	93	USE pegrid
	94	USE profil_parameter
	95	USE statistics
	96
	97	IMPLICIT NONE
	98
[410]	99	CHARACTER (LEN=2) :: mask_char, suffix
[82]	100	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	101	CHARACTER (LEN=30) :: filename
	102	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	103	avs_data_file_localname
	104	CHARACTER (LEN=80) :: rtext
	105	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	106	batch_scp, zeile
	107	CHARACTER (LEN=400) :: command
	108
	109	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	110	j, k, legpos = 1, timodex = 1
	111	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	112
	113	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	114	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	115	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	116
	117	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	118	sizex = 250.0, sizey = 40.0, texfac = 1.5
	119
	120	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	121	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	122
	123
	124	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	125	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	126	rand, rlegfak, sizex, sizey, texfac, &
	127	timodex, twoxa, twoya, xtext
	128
	129
	130	!
	131	!-- Immediate return if file already open
	132	IF ( openfile(file_id)%opened ) RETURN
	133
[809]	134	#if ! defined ( __check )
[1]	135	!
	136	!-- Only certain files are allowed to be re-opened
	137	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	138	!-- has not been checked so far, if it works!
	139	IF ( openfile(file_id)%opened_before ) THEN
	140	SELECT CASE ( file_id )
[143]	141	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	142	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	143	message_string = 're-open of unit ' // &
[274]	144	'14 is not verified. Please check results!'
[247]	145	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	146	ENDIF
[143]	147
[1]	148	CASE DEFAULT
[247]	149	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	150	' is not allowed'
[247]	151	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	152
[1]	153	RETURN
[143]	154
[1]	155	END SELECT
	156	ENDIF
[807]	157	#endif
[1]	158
	159	!
	160	!-- Check if file may be opened on the relevant PE
	161	SELECT CASE ( file_id )
	162
[964]	163	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
[410]	164
[493]	165	IF ( myid /= 0 ) THEN
	166	WRITE( message_string, * ) 'opening file-id ',file_id, &
	167	' not allowed for PE ',myid
	168	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	169	ENDIF
	170
[564]	171	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	172
[1031]	173	IF ( netcdf_data_format < 5 ) THEN
[247]	174
[410]	175	IF ( myid /= 0 ) THEN
	176	WRITE( message_string, * ) 'opening file-id ',file_id, &
	177	' not allowed for PE ',myid
	178	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	179	ENDIF
	180
[493]	181	ENDIF
[1]	182
	183	CASE ( 21, 22, 23 )
	184
	185	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	186	IF ( myid /= 0 ) THEN
[247]	187	WRITE( message_string, * ) 'opening file-id ',file_id, &
	188	' not allowed for PE ',myid
[277]	189	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	190	END IF
[1]	191	ENDIF
	192
	193	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	194
	195	!
	196	!-- File-ids that are used temporarily in other routines
[247]	197	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	198	' is not allowed since it is used otherwise'
[247]	199	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	200
[1]	201	END SELECT
	202
	203	!
	204	!-- Open relevant files
	205	SELECT CASE ( file_id )
	206
	207	CASE ( 11 )
	208
[807]	209	#if defined ( __check )
	210	!
	211	!-- In case of a prior parameter file check, the p3d data is stored in
	212	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	213	!-- check_namelist_files!
	214	IF ( check_restart == 2 ) THEN
	215	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	216	STATUS='OLD' )
	217	ELSE
	218	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	219	STATUS='OLD' )
	220	END IF
	221	#else
	222
[102]	223	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	224	STATUS='OLD' )
[807]	225	#endif
[1]	226
	227	CASE ( 13 )
	228
	229	IF ( myid_char == '' ) THEN
[102]	230	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	231	FORM='UNFORMATTED', STATUS='OLD' )
[1]	232	ELSE
[143]	233	!
	234	!-- First opening of unit 13 openes file _0000 on all PEs because only
	235	!-- this file contains the global variables
	236	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	237	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	238	FORM='UNFORMATTED', STATUS='OLD' )
	239	ELSE
	240	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	241	FORM='UNFORMATTED', STATUS='OLD' )
	242	ENDIF
[1]	243	ENDIF
	244
	245	CASE ( 14 )
	246
	247	IF ( myid_char == '' ) THEN
[102]	248	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	249	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	250	ELSE
	251	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	252	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	253	ENDIF
[809]	254	#if defined( __parallel ) && ! defined ( __check )
[1]	255	!
	256	!-- Set a barrier in order to allow that all other processors in the
	257	!-- directory created by PE0 can open their file
	258	CALL MPI_BARRIER( comm2d, ierr )
	259	#endif
[146]	260	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[887]	261	FORM='UNFORMATTED' )
[1]	262	ENDIF
	263
	264	CASE ( 15 )
	265
[102]	266	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	267
	268	CASE ( 16 )
	269
[102]	270	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	271
	272	CASE ( 17 )
	273
[102]	274	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	275
	276	CASE ( 18 )
	277
[102]	278	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	279
	280	CASE ( 19 )
	281
[102]	282	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	283
	284	CASE ( 20 )
	285
	286	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	287	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	288	ENDIF
	289	IF ( myid_char == '' ) THEN
[105]	290	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	291	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	292	ELSE
[809]	293	#if defined( __parallel ) && ! defined ( __check )
[1]	294	!
	295	!-- Set a barrier in order to allow that all other processors in the
	296	!-- directory created by PE0 can open their file
	297	CALL MPI_BARRIER( comm2d, ierr )
	298	#endif
[105]	299	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	300	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	301	ENDIF
	302
	303	CASE ( 21 )
	304
	305	IF ( data_output_2d_on_each_pe ) THEN
[105]	306	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	307	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	308	ELSE
[102]	309	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	310	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	311	ENDIF
	312
	313	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	314	!
	315	!-- Output for combine_plot_fields
	316	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	317	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	318	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	319	ENDIF
	320	!
	321	!-- Determine and write ISO2D coordiante header
	322	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	323	hu = 0.0
	324	ho = (ny+1) * dy
	325	DO i = 1, ny
	326	eta(i) = REAL( i ) / ( ny + 1.0 )
	327	ENDDO
	328	eta(0) = 0.0
	329	eta(ny+1) = 1.0
	330
	331	WRITE (21) dx,eta,hu,ho
	332	DEALLOCATE( eta, ho, hu )
	333
	334	!
	335	!-- Create output file for local parameters
	336	IF ( iso2d_output ) THEN
[102]	337	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	338	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	339	openfile(27)%opened = .TRUE.
	340	ENDIF
	341
	342	ENDIF
	343
	344	CASE ( 22 )
	345
	346	IF ( data_output_2d_on_each_pe ) THEN
[105]	347	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	348	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	349	ELSE
[102]	350	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	351	POSITION='APPEND' )
	352	ENDIF
	353
	354	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	355	!
	356	!-- Output for combine_plot_fields
	357	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	358	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	359	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	360	ENDIF
	361	!
	362	!-- Determine and write ISO2D coordiante header
	363	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	364	hu = 0.0
	365	ho = zu(nz+1)
	366	DO i = 1, nz
	367	eta(i) = REAL( zu(i) ) / zu(nz+1)
	368	ENDDO
	369	eta(0) = 0.0
	370	eta(nz+1) = 1.0
	371
	372	WRITE (22) dx,eta,hu,ho
	373	DEALLOCATE( eta, ho, hu )
	374	!
	375	!-- Create output file for local parameters
[102]	376	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	377	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	378	openfile(28)%opened = .TRUE.
	379
	380	ENDIF
	381
	382	CASE ( 23 )
	383
	384	IF ( data_output_2d_on_each_pe ) THEN
[105]	385	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	386	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	387	ELSE
[102]	388	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	389	POSITION='APPEND' )
	390	ENDIF
	391
	392	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	393	!
	394	!-- Output for combine_plot_fields
	395	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	396	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	397	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	398	ENDIF
	399	!
	400	!-- Determine and write ISO2D coordiante header
	401	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	402	hu = 0.0
	403	ho = zu(nz+1)
	404	DO i = 1, nz
	405	eta(i) = REAL( zu(i) ) / zu(nz+1)
	406	ENDDO
	407	eta(0) = 0.0
	408	eta(nz+1) = 1.0
	409
	410	WRITE (23) dx,eta,hu,ho
	411	DEALLOCATE( eta, ho, hu )
	412	!
	413	!-- Create output file for local parameters
[102]	414	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	415	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	416	openfile(29)%opened = .TRUE.
	417
	418	ENDIF
	419
	420	CASE ( 30 )
	421
[105]	422	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	423	FORM='UNFORMATTED' )
[1]	424	!
	425	!-- Write coordinate file for AVS
	426	IF ( myid == 0 ) THEN
	427	#if defined( __parallel )
	428	!
	429	!-- Specifications for combine_plot_fields
	430	IF ( .NOT. do3d_compress ) THEN
[667]	431	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	432	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	433	ENDIF
	434	#endif
	435	!
	436	!-- Write coordinate file for AVS:
	437	!-- First determine file names (including cyle numbers) of AVS files on
	438	!-- target machine (to which the files are to be transferred).
	439	!-- Therefore path information has to be obtained first.
	440	IF ( avs_output ) THEN
[82]	441	iaddres = LEN_TRIM( return_addres )
	442	iusern = LEN_TRIM( return_username )
[1]	443
	444	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	445	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	446	.NOT. avs_data_file_found )
	447
	448	READ ( 3, '(A)', END=1 ) zeile
	449
	450	SELECT CASE ( zeile(1:11) )
	451
	452	CASE ( 'PLOT3D_COOR' )
	453	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	454	avs_coor_file_localname
	455	avs_coor_file_found = .TRUE.
	456
	457	CASE ( 'PLOT3D_DATA' )
	458	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	459	avs_data_file_localname
	460	avs_data_file_found = .TRUE.
	461
	462	CASE DEFAULT
	463	READ ( 3, '(A/A)' ) zeile, zeile
	464
	465	END SELECT
	466
	467	ENDDO
	468	!
	469	!-- Now the cycle numbers on the remote machine must be obtained
	470	!-- using batch_scp
	471	1 CLOSE ( 3 )
	472	IF ( .NOT. avs_coor_file_found .OR. &
	473	.NOT. avs_data_file_found ) THEN
[274]	474	message_string= 'no filename for AVS-data-file ' // &
	475	'found in MRUN-config-file' // &
[247]	476	' &filename in FLD-file set to "unknown"'
	477	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	478
	479	avs_coor_file = 'unknown'
	480	avs_data_file = 'unknown'
	481	ELSE
	482	get_filenames = .TRUE.
	483	IF ( TRIM( host ) == 'hpmuk' .OR. &
	484	TRIM( host ) == 'lcmuk' ) THEN
	485	batch_scp = '/home/raasch/pub/batch_scp'
	486	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	487	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	488	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	489	TRIM( host ) == 'ibmb' ) THEN
	490	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	491	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	492	batch_scp = '/home/nhbksira/pub/batch_scp'
	493	ELSE
[247]	494	message_string= 'no path for batch_scp on host "' // &
	495	TRIM( host ) // '"'
	496	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	497	get_filenames = .FALSE.
	498	ENDIF
	499
	500	IF ( get_filenames ) THEN
	501	!
	502	!-- Determine the coordinate file name.
	503	!-- /etc/passwd serves as Dummy-Datei, because it is not
	504	!-- really transferred.
	505	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	506	return_username(1:iusern) // ' ' // &
[1]	507	return_addres(1:iaddres) // ' /etc/passwd "' // &
	508	TRIM( avs_coor_file_catalog ) // '" ' // &
	509	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	510
	511	CALL local_system( command )
	512	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	513	READ ( 3, '(A)' ) avs_coor_file
	514	CLOSE ( 3 )
	515	!
	516	!-- Determine the data file name
	517	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	518	return_username(1:iusern) // ' ' // &
[1]	519	return_addres(1:iaddres) // ' /etc/passwd "' // &
	520	TRIM( avs_data_file_catalog ) // '" ' // &
	521	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	522
	523	CALL local_system( command )
	524	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	525	READ ( 3, '(A)' ) avs_data_file
	526	CLOSE ( 3 )
	527
	528	ELSE
	529
	530	avs_coor_file = 'unknown'
	531	avs_data_file = 'unknown'
	532
	533	ENDIF
	534
	535	ENDIF
	536
	537	!
	538	!-- Output of the coordinate file description for FLD-file
	539	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	540	openfile(33)%opened = .TRUE.
	541	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	542	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	543	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	544
	545
	546	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	547	DO i = 0, nx+1
	548	xkoor(i) = i * dx
	549	ENDDO
	550	DO j = 0, ny+1
	551	ykoor(j) = j * dy
	552	ENDDO
	553	DO k = 0, nz_do3d
	554	zkoor(k) = zu(k)
	555	ENDDO
	556
	557	!
	558	!-- Create and write on AVS coordinate file
	559	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	560	openfile(31)%opened = .TRUE.
	561
	562	WRITE (31) xkoor, ykoor, zkoor
	563	DEALLOCATE( xkoor, ykoor, zkoor )
	564
	565	!
	566	!-- Create FLD file (being written on in close_file)
	567	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	568	openfile(32)%opened = .TRUE.
	569
	570	!
	571	!-- Create flag file for compressed 3D output,
	572	!-- influences output commands in mrun
	573	IF ( do3d_compress ) THEN
	574	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	575	WRITE ( 3, '(1X)' )
	576	CLOSE ( 3 )
	577	ENDIF
	578
	579	ENDIF
	580
	581	ENDIF
	582
	583	!
	584	!-- In case of data compression output of the coordinates of the
	585	!-- corresponding partial array of a PE only once at the top of the file
	586	IF ( avs_output .AND. do3d_compress ) THEN
[667]	587	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	588	ENDIF
	589
	590	CASE ( 50:59 )
	591
	592	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	593	suffix = ''
	594	ELSE
	595	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	596	ENDIF
[105]	597	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	598	TRIM( suffix ), &
[102]	599	FORM='FORMATTED', RECL=496 )
[1]	600	!
	601	!-- Write PROFIL parameter file for output of time series
	602	!-- NOTE: To be on the safe side, this output is done at the beginning of
	603	!-- the model run (in case of collapse) and it is repeated in
	604	!-- close_file, then, however, with value ranges for the coordinate
	605	!-- systems
	606	!
	607	!-- Firstly determine the number of the coordinate systems to be drawn
	608	cranz = 0
	609	DO j = 1, 10
	610	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	611	ENDDO
	612	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	613	TRIM( region( file_id - 50 ) )
	614	!
	615	!-- Write RAHMEN parameter
[105]	616	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	617	TRIM( suffix ), &
[102]	618	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	619	WRITE ( 90, RAHMEN )
	620	!
	621	!-- Determine and write CROSS parameters for the individual coordinate
	622	!-- systems
	623	DO j = 1, 10
	624	k = cross_ts_number_count(j)
	625	IF ( k /= 0 ) THEN
	626	!
	627	!-- Store curve numbers, colours and line style
	628	klist(1:k) = cross_ts_numbers(1:k,j)
	629	klist(k+1:10) = 999999
	630	!
	631	!-- Write CROSS parameter
	632	WRITE ( 90, CROSS )
	633
	634	ENDIF
	635	ENDDO
	636
	637	CLOSE ( 90 )
	638	!
	639	!-- Write all labels at the top of the data file, but only during the
	640	!-- first run of a sequence of jobs. The following jobs copy the time
	641	!-- series data to the bottom of that file.
	642	IF ( runnr == 0 ) THEN
	643	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	644	' ' // TRIM( region( file_id - 50 ) )
	645	ENDIF
	646
	647
	648	CASE ( 80 )
	649
	650	IF ( myid_char == '' ) THEN
[105]	651	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	652	FORM='FORMATTED', POSITION='APPEND' )
[1]	653	ELSE
	654	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	655	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	656	ENDIF
[809]	657	#if defined( __parallel ) && ! defined ( __check )
[1]	658	!
	659	!-- Set a barrier in order to allow that thereafter all other
	660	!-- processors in the directory created by PE0 can open their file.
	661	!-- WARNING: The following barrier will lead to hanging jobs, if
	662	!-- check_open is first called from routine
	663	!-- allocate_prt_memory!
	664	IF ( .NOT. openfile(80)%opened_before ) THEN
	665	CALL MPI_BARRIER( comm2d, ierr )
	666	ENDIF
	667	#endif
[105]	668	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	669	myid_char, &
[102]	670	FORM='FORMATTED', POSITION='APPEND' )
[1]	671	ENDIF
	672
	673	IF ( .NOT. openfile(80)%opened_before ) THEN
	674	WRITE ( 80, 8000 ) TRIM( run_description_header )
	675	ENDIF
	676
	677	CASE ( 81 )
	678
[102]	679	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	680	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	681
	682	CASE ( 82 )
	683
[102]	684	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	685	POSITION = 'APPEND' )
	686
	687	CASE ( 83 )
	688
[102]	689	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	690	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	691
	692	CASE ( 84 )
	693
[102]	694	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	695	POSITION='APPEND' )
	696
	697	CASE ( 85 )
	698
	699	IF ( myid_char == '' ) THEN
[105]	700	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	701	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	702	ELSE
	703	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	704	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	705	ENDIF
[809]	706	#if defined( __parallel ) && ! defined ( __check )
[1]	707	!
	708	!-- Set a barrier in order to allow that thereafter all other
	709	!-- processors in the directory created by PE0 can open their file
	710	CALL MPI_BARRIER( comm2d, ierr )
	711	#endif
[105]	712	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	713	myid_char, &
[102]	714	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	715	ENDIF
	716
	717	IF ( .NOT. openfile(85)%opened_before ) THEN
	718	WRITE ( 85 ) run_description_header
	719	!
	720	!-- Attention: change version number whenever the output format on
[849]	721	!-- unit 85 is changed (see also in routine
	722	!-- lpm_data_output_particles)
[1]	723	rtext = 'data format version 3.0'
	724	WRITE ( 85 ) rtext
	725	WRITE ( 85 ) number_of_particle_groups, &
	726	max_number_of_particle_groups
	727	WRITE ( 85 ) particle_groups
	728	ENDIF
	729
	730	#if defined( __netcdf )
	731	CASE ( 101, 111 )
	732	!
	733	!-- Set filename depending on unit number
	734	IF ( file_id == 101 ) THEN
[102]	735	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	736	av = 0
	737	ELSE
[102]	738	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	739	av = 1
	740	ENDIF
	741	!
[1031]	742	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	743	!-- be opened for extension, if its dimensions and variables match the
	744	!-- actual run.
	745	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	746
	747	IF ( netcdf_extend ) THEN
	748	!
[1031]	749	!-- Open an existing netCDF file for output
	750	CALL open_write_netcdf_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	751	!
	752	!-- Read header information and set all ids. If there is a mismatch
	753	!-- between the previuos and the actual run, netcdf_extend is returned
	754	!-- as .FALSE.
	755	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	756
	757	!
	758	!-- Remove the local file, if it can not be extended
	759	IF ( .NOT. netcdf_extend ) THEN
	760	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	761	CALL handle_netcdf_error( 'check_open', 21 )
[493]	762	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	763	ENDIF
	764
	765	ENDIF
	766
	767	IF ( .NOT. netcdf_extend ) THEN
	768	!
[1031]	769	!-- Create a new netCDF output file with requested netCDF format
	770	CALL create_netcdf_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	771
	772	!
[1]	773	!-- Define the header
	774	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	775
[493]	776	!
[1031]	777	!-- In case of parallel netCDF output, create flag file which tells
[493]	778	!-- combine_plot_fields that nothing is to do.
[1031]	779	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	780	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	781	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	782	CLOSE( 99 )
	783	ENDIF
	784
[1]	785	ENDIF
	786
	787	CASE ( 102, 112 )
	788	!
	789	!-- Set filename depending on unit number
	790	IF ( file_id == 102 ) THEN
[102]	791	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	792	av = 0
	793	ELSE
[102]	794	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	795	av = 1
	796	ENDIF
	797	!
[1031]	798	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	799	!-- be opened for extension, if its dimensions and variables match the
	800	!-- actual run.
	801	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	802
	803	IF ( netcdf_extend ) THEN
	804	!
[1031]	805	!-- Open an existing netCDF file for output
	806	CALL open_write_netcdf_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	807	!
	808	!-- Read header information and set all ids. If there is a mismatch
	809	!-- between the previuos and the actual run, netcdf_extend is returned
	810	!-- as .FALSE.
	811	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	812
	813	!
	814	!-- Remove the local file, if it can not be extended
	815	IF ( .NOT. netcdf_extend ) THEN
	816	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	817	CALL handle_netcdf_error( 'check_open', 24 )
[493]	818	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	819	ENDIF
	820
	821	ENDIF
	822
	823	IF ( .NOT. netcdf_extend ) THEN
	824	!
[1031]	825	!-- Create a new netCDF output file with requested netCDF format
	826	CALL create_netcdf_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	827
	828	!
[1]	829	!-- Define the header
	830	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	831
[493]	832	!
[1031]	833	!-- In case of parallel netCDF output, create flag file which tells
[493]	834	!-- combine_plot_fields that nothing is to do.
[1031]	835	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	836	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	837	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	838	CLOSE( 99 )
	839	ENDIF
	840
[1]	841	ENDIF
	842
	843	CASE ( 103, 113 )
	844	!
	845	!-- Set filename depending on unit number
	846	IF ( file_id == 103 ) THEN
[102]	847	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	848	av = 0
	849	ELSE
[102]	850	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	851	av = 1
	852	ENDIF
	853	!
[1031]	854	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	855	!-- be opened for extension, if its dimensions and variables match the
	856	!-- actual run.
	857	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	858
	859	IF ( netcdf_extend ) THEN
	860	!
[1031]	861	!-- Open an existing netCDF file for output
	862	CALL open_write_netcdf_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	863	!
	864	!-- Read header information and set all ids. If there is a mismatch
	865	!-- between the previuos and the actual run, netcdf_extend is returned
	866	!-- as .FALSE.
	867	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	868
	869	!
	870	!-- Remove the local file, if it can not be extended
	871	IF ( .NOT. netcdf_extend ) THEN
	872	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	873	CALL handle_netcdf_error( 'check_open', 27 )
[493]	874	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	875	ENDIF
	876
	877	ENDIF
	878
	879	IF ( .NOT. netcdf_extend ) THEN
	880	!
[1031]	881	!-- Create a new netCDF output file with requested netCDF format
	882	CALL create_netcdf_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	883
	884	!
[1]	885	!-- Define the header
	886	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	887
[493]	888	!
[1031]	889	!-- In case of parallel netCDF output, create flag file which tells
[493]	890	!-- combine_plot_fields that nothing is to do.
[1031]	891	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	892	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	893	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	894	CLOSE( 99 )
	895	ENDIF
	896
[1]	897	ENDIF
	898
	899	CASE ( 104 )
	900	!
[102]	901	!-- Set filename
	902	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	903
	904	!
[1031]	905	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	906	!-- be opened for extension, if its variables match the actual run.
[102]	907	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	908
	909	IF ( netcdf_extend ) THEN
	910	!
[1031]	911	!-- Open an existing netCDF file for output
	912	CALL open_write_netcdf_file( filename, id_set_pr, .FALSE., 29 )
[1]	913	!
	914	!-- Read header information and set all ids. If there is a mismatch
	915	!-- between the previuos and the actual run, netcdf_extend is returned
	916	!-- as .FALSE.
	917	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	918
	919	!
	920	!-- Remove the local file, if it can not be extended
	921	IF ( .NOT. netcdf_extend ) THEN
	922	nc_stat = NF90_CLOSE( id_set_pr )
[263]	923	CALL handle_netcdf_error( 'check_open', 30 )
[102]	924	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	925	ENDIF
	926
	927	ENDIF
	928
	929	IF ( .NOT. netcdf_extend ) THEN
	930	!
[1031]	931	!-- Create a new netCDF output file with requested netCDF format
	932	CALL create_netcdf_file( filename, id_set_pr, .FALSE., 31 )
[1]	933	!
	934	!-- Define the header
	935	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	936
	937	ENDIF
	938
	939	CASE ( 105 )
	940	!
[102]	941	!-- Set filename
	942	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	943
	944	!
[1031]	945	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	946	!-- be opened for extension, if its variables match the actual run.
[102]	947	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	948
	949	IF ( netcdf_extend ) THEN
	950	!
[1031]	951	!-- Open an existing netCDF file for output
	952	CALL open_write_netcdf_file( filename, id_set_ts, .FALSE., 32 )
[1]	953	!
	954	!-- Read header information and set all ids. If there is a mismatch
	955	!-- between the previuos and the actual run, netcdf_extend is returned
	956	!-- as .FALSE.
	957	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	958
	959	!
	960	!-- Remove the local file, if it can not be extended
	961	IF ( .NOT. netcdf_extend ) THEN
	962	nc_stat = NF90_CLOSE( id_set_ts )
[263]	963	CALL handle_netcdf_error( 'check_open', 33 )
[102]	964	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	965	ENDIF
	966
	967	ENDIF
	968
	969	IF ( .NOT. netcdf_extend ) THEN
	970	!
[1031]	971	!-- Create a new netCDF output file with requested netCDF format
	972	CALL create_netcdf_file( filename, id_set_ts, .FALSE., 34 )
[1]	973	!
	974	!-- Define the header
	975	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	976
	977	ENDIF
	978
	979
	980	CASE ( 106, 116 )
	981	!
	982	!-- Set filename depending on unit number
	983	IF ( file_id == 106 ) THEN
[102]	984	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	985	av = 0
	986	ELSE
[102]	987	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	988	av = 1
	989	ENDIF
	990	!
[1031]	991	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	992	!-- be opened for extension, if its dimensions and variables match the
	993	!-- actual run.
	994	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	995
	996	IF ( netcdf_extend ) THEN
	997	!
[1031]	998	!-- Open an existing netCDF file for output
	999	CALL open_write_netcdf_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1000	!
	1001	!-- Read header information and set all ids. If there is a mismatch
	1002	!-- between the previuos and the actual run, netcdf_extend is returned
	1003	!-- as .FALSE.
	1004	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1005
	1006	!
	1007	!-- Remove the local file, if it can not be extended
	1008	IF ( .NOT. netcdf_extend ) THEN
	1009	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1010	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1011	CALL local_system('rm ' // TRIM( filename ) )
	1012	ENDIF
	1013
	1014	ENDIF
	1015
	1016	IF ( .NOT. netcdf_extend ) THEN
	1017	!
[1031]	1018	!-- Create a new netCDF output file with requested netCDF format
	1019	CALL create_netcdf_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1020
	1021	!
[1]	1022	!-- Define the header
	1023	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1024
[493]	1025	!
[1031]	1026	!-- In case of parallel netCDF output, create flag file which tells
[493]	1027	!-- combine_plot_fields that nothing is to do.
[1031]	1028	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1029	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1030	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1031	CLOSE( 99 )
	1032	ENDIF
	1033
[1]	1034	ENDIF
	1035
	1036
	1037	CASE ( 107 )
	1038	!
[102]	1039	!-- Set filename
	1040	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1041
	1042	!
[1031]	1043	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1044	!-- be opened for extension, if its variables match the actual run.
[102]	1045	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1046
	1047	IF ( netcdf_extend ) THEN
	1048	!
[1031]	1049	!-- Open an existing netCDF file for output
	1050	CALL open_write_netcdf_file( filename, id_set_sp, .FALSE., 38 )
[263]	1051
[1]	1052	!
	1053	!-- Read header information and set all ids. If there is a mismatch
	1054	!-- between the previuos and the actual run, netcdf_extend is returned
	1055	!-- as .FALSE.
	1056	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1057
	1058	!
	1059	!-- Remove the local file, if it can not be extended
	1060	IF ( .NOT. netcdf_extend ) THEN
	1061	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1062	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1063	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1064	ENDIF
	1065
	1066	ENDIF
	1067
	1068	IF ( .NOT. netcdf_extend ) THEN
	1069	!
[1031]	1070	!-- Create a new netCDF output file with requested netCDF format
	1071	CALL create_netcdf_file( filename, id_set_sp, .FALSE., 40 )
[1]	1072	!
	1073	!-- Define the header
	1074	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1075
	1076	ENDIF
	1077
	1078
	1079	CASE ( 108 )
	1080
	1081	IF ( myid_char == '' ) THEN
[102]	1082	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1083	ELSE
[105]	1084	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1085	myid_char
[1]	1086	ENDIF
	1087	!
[1031]	1088	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1089	!-- be opened for extension, if its variables match the actual run.
	1090	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1091
	1092	IF ( netcdf_extend ) THEN
	1093	!
[1031]	1094	!-- Open an existing netCDF file for output
	1095	CALL open_write_netcdf_file( filename, id_set_prt, .FALSE., 41 )
[1]	1096	!
	1097	!-- Read header information and set all ids. If there is a mismatch
	1098	!-- between the previuos and the actual run, netcdf_extend is returned
	1099	!-- as .FALSE.
	1100	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1101
	1102	!
	1103	!-- Remove the local file, if it can not be extended
	1104	IF ( .NOT. netcdf_extend ) THEN
	1105	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1106	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1107	CALL local_system( 'rm ' // filename )
	1108	ENDIF
	1109
	1110	ENDIF
	1111
	1112	IF ( .NOT. netcdf_extend ) THEN
	1113
	1114	!
	1115	!-- For runs on multiple processors create the subdirectory
	1116	IF ( myid_char /= '' ) THEN
	1117	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1118	THEN ! needs modification in case of non-extendable sets
[102]	1119	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1120	TRIM( coupling_char ) // '/' )
[1]	1121	ENDIF
[809]	1122	#if defined( __parallel ) && ! defined ( __check )
[807]	1123	!
[1]	1124	!-- Set a barrier in order to allow that all other processors in the
	1125	!-- directory created by PE0 can open their file
	1126	CALL MPI_BARRIER( comm2d, ierr )
	1127	#endif
	1128	ENDIF
	1129
	1130	!
[1031]	1131	!-- Create a new netCDF output file with requested netCDF format
	1132	CALL create_netcdf_file( filename, id_set_prt, .FALSE., 43 )
[519]	1133
	1134	!
[1]	1135	!-- Define the header
	1136	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1137
	1138	ENDIF
	1139
	1140	CASE ( 109 )
	1141	!
[102]	1142	!-- Set filename
	1143	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1144
	1145	!
[1031]	1146	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1147	!-- be opened for extension, if its variables match the actual run.
[102]	1148	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1149
	1150	IF ( netcdf_extend ) THEN
	1151	!
[1031]	1152	!-- Open an existing netCDF file for output
	1153	CALL open_write_netcdf_file( filename, id_set_pts, .FALSE., 393 )
[1]	1154	!
	1155	!-- Read header information and set all ids. If there is a mismatch
	1156	!-- between the previuos and the actual run, netcdf_extend is returned
	1157	!-- as .FALSE.
	1158	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1159
	1160	!
	1161	!-- Remove the local file, if it can not be extended
	1162	IF ( .NOT. netcdf_extend ) THEN
	1163	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1164	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1165	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1166	ENDIF
	1167
	1168	ENDIF
	1169
	1170	IF ( .NOT. netcdf_extend ) THEN
	1171	!
[1031]	1172	!-- Create a new netCDF output file with requested netCDF format
	1173	CALL create_netcdf_file( filename, id_set_pts, .FALSE., 395 )
[1]	1174	!
	1175	!-- Define the header
	1176	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1177
	1178	ENDIF
[410]	1179
[564]	1180	CASE ( 201:200+2*max_masks )
[410]	1181	!
	1182	!-- Set filename depending on unit number
[564]	1183	IF ( file_id <= 200+max_masks ) THEN
	1184	mid = file_id - 200
[410]	1185	WRITE ( mask_char,'(I2.2)') mid
	1186	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1187	av = 0
	1188	ELSE
[564]	1189	mid = file_id - (200+max_masks)
[410]	1190	WRITE ( mask_char,'(I2.2)') mid
	1191	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1192	coupling_char
	1193	av = 1
	1194	ENDIF
	1195	!
[1031]	1196	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1197	!-- be opened for extension, if its dimensions and variables match the
	1198	!-- actual run.
	1199	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1200
	1201	IF ( netcdf_extend ) THEN
	1202	!
[1031]	1203	!-- Open an existing netCDF file for output
	1204	CALL open_write_netcdf_file( filename, id_set_mask(mid,av), &
	1205	.TRUE., 456 )
[410]	1206	!
	1207	!-- Read header information and set all ids. If there is a mismatch
	1208	!-- between the previuos and the actual run, netcdf_extend is returned
	1209	!-- as .FALSE.
	1210	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1211
[410]	1212	!
	1213	!-- Remove the local file, if it can not be extended
	1214	IF ( .NOT. netcdf_extend ) THEN
	1215	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1216	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1217	CALL local_system('rm ' // TRIM( filename ) )
	1218	ENDIF
[1]	1219
[410]	1220	ENDIF
	1221
	1222	IF ( .NOT. netcdf_extend ) THEN
[1]	1223	!
[1031]	1224	!-- Create a new netCDF output file with requested netCDF format
	1225	CALL create_netcdf_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1226	!
[410]	1227	!-- Define the header
	1228	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1229
	1230	ENDIF
	1231
	1232
	1233	#else
	1234
[564]	1235	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1236
	1237	!
[1]	1238	!-- Nothing is done in case of missing netcdf support
	1239	RETURN
	1240
	1241	#endif
	1242
	1243	CASE DEFAULT
	1244
[247]	1245	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1246	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1247
	1248	END SELECT
	1249
	1250	!
	1251	!-- Set open flag
	1252	openfile(file_id)%opened = .TRUE.
	1253
	1254	!
	1255	!-- Formats
	1256	3300 FORMAT ('#'/ &
	1257	'coord 1 file=',A,' filetype=unformatted'/ &
	1258	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1259	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1260	'#')
	1261	4000 FORMAT ('# ',A)
	1262	5000 FORMAT ('# ',A/ &
	1263	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1264	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1265	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1266	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1267	8000 FORMAT (A/ &
	1268	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1269	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1270	103('-'))
	1271
	1272	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |