Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1034

Last change on this file since 1034 was 1031, checked in by raasch, 12 years ago
netCDF4 without parallel file support implemented additional define string netcdf4_parallel is required to switch on parallel file support
Property svn:keywords set to `Id`
File size: 45.1 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! netCDF4 without parallel file support implemented,
7	! opening of netCDF files are done by new routines create_netcdf_file and
8	! open_write_netcdf_file
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: check_open.f90 1031 2012-10-19 14:35:30Z raasch $
13	!
14	! 964 2012-07-26 09:14:24Z raasch
15	! old profil-units (40:49) removed,
16	! append feature removed from unit 14
17	!
18	! 849 2012-03-15 10:35:09Z raasch
19	! comment changed
20	!
21	! 809 2012-01-30 13:32:58Z maronga
22	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
23	!
24	! 807 2012-01-25 11:53:51Z maronga
25	! New cpp directive "__check" implemented which is used by check_namelist_files
26	!
27	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
28	!
29	! 667 2010-12-23 12:06:00Z suehring/gryschka
30	! Output of total array size was adapted to nbgp.
31	!
32	! 600 2010-11-24 16:10:51Z raasch
33	! bugfix in opening of cross section netcdf-files (parallel opening with
34	! netcdf4 only works for netcdf_data_format > 2)
35	!
36	! 564 2010-09-30 13:18:59Z helmke
37	! start number of mask output files changed to 201, netcdf message identifiers
38	! of masked output changed
39	!
40	! 519 2010-03-19 05:30:02Z raasch
41	! netCDF4 support for particle data
42	!
43	! 493 2010-03-01 08:30:24Z raasch
44	! netCDF4 support (parallel output)
45	!
46	! 410 2009-12-04 17:05:40Z letzel
47	! masked data output
48	!
49	! 277 2009-03-31 09:13:47Z heinze
50	! Output of netCDF messages with aid of message handling routine.
51	! Output of messages replaced by message handling routine
52	!
53	! 146 2008-01-17 13:08:34Z raasch
54	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
55	! because only this file contains the global variables,
56	! myid_char_14 removed
57	!
58	! 120 2007-10-17 11:54:43Z raasch
59	! Status of 3D-volume netCDF data file only depends on switch netcdf_64bit_3d
60	!
61	! 105 2007-08-08 07:12:55Z raasch
62	! Different filenames are used in case of a coupled simulation,
63	! coupling_char added to all relevant filenames
64	!
65	! 82 2007-04-16 15:40:52Z raasch
66	! Call of local_getenv removed, preprocessor directives for old systems removed
67	!
68	! 46 2007-03-05 06:00:47Z raasch
69	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
70	!
71	! RCS Log replace by Id keyword, revision history cleaned up
72	!
73	! Revision 1.44 2006/08/22 13:48:34 raasch
74	! xz and yz cross sections now up to nzt+1
75	!
76	! Revision 1.1 1997/08/11 06:10:55 raasch
77	! Initial revision
78	!
79	!
80	! Description:
81	! ------------
82	! Check if file unit is open. If not, open file and, if necessary, write a
83	! header or start other initializing actions, respectively.
84	!------------------------------------------------------------------------------!
85
86	USE array_kind
87	USE arrays_3d
88	USE control_parameters
89	USE grid_variables
90	USE indices
91	USE netcdf_control
92	USE particle_attributes
93	USE pegrid
94	USE profil_parameter
95	USE statistics
96
97	IMPLICIT NONE
98
99	CHARACTER (LEN=2) :: mask_char, suffix
100	CHARACTER (LEN=20) :: xtext = 'time in s'
101	CHARACTER (LEN=30) :: filename
102	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
103	avs_data_file_localname
104	CHARACTER (LEN=80) :: rtext
105	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
106	batch_scp, zeile
107	CHARACTER (LEN=400) :: command
108
109	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
110	j, k, legpos = 1, timodex = 1
111	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
112
113	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
114	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
115	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
116
117	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
118	sizex = 250.0, sizey = 40.0, texfac = 1.5
119
120	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
121	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
122
123
124	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
125	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
126	rand, rlegfak, sizex, sizey, texfac, &
127	timodex, twoxa, twoya, xtext
128
129
130	!
131	!-- Immediate return if file already open
132	IF ( openfile(file_id)%opened ) RETURN
133
134	#if ! defined ( __check )
135	!
136	!-- Only certain files are allowed to be re-opened
137	!-- NOTE: some of the other files perhaps also could be re-opened, but it
138	!-- has not been checked so far, if it works!
139	IF ( openfile(file_id)%opened_before ) THEN
140	SELECT CASE ( file_id )
141	CASE ( 13, 14, 21, 22, 23, 80:85 )
142	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
143	message_string = 're-open of unit ' // &
144	'14 is not verified. Please check results!'
145	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
146	ENDIF
147
148	CASE DEFAULT
149	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
150	' is not allowed'
151	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
152
153	RETURN
154
155	END SELECT
156	ENDIF
157	#endif
158
159	!
160	!-- Check if file may be opened on the relevant PE
161	SELECT CASE ( file_id )
162
163	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
164
165	IF ( myid /= 0 ) THEN
166	WRITE( message_string, * ) 'opening file-id ',file_id, &
167	' not allowed for PE ',myid
168	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
169	ENDIF
170
171	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
172
173	IF ( netcdf_data_format < 5 ) THEN
174
175	IF ( myid /= 0 ) THEN
176	WRITE( message_string, * ) 'opening file-id ',file_id, &
177	' not allowed for PE ',myid
178	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
179	ENDIF
180
181	ENDIF
182
183	CASE ( 21, 22, 23 )
184
185	IF ( .NOT. data_output_2d_on_each_pe ) THEN
186	IF ( myid /= 0 ) THEN
187	WRITE( message_string, * ) 'opening file-id ',file_id, &
188	' not allowed for PE ',myid
189	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
190	END IF
191	ENDIF
192
193	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
194
195	!
196	!-- File-ids that are used temporarily in other routines
197	WRITE( message_string, * ) 'opening file-id ',file_id, &
198	' is not allowed since it is used otherwise'
199	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
200
201	END SELECT
202
203	!
204	!-- Open relevant files
205	SELECT CASE ( file_id )
206
207	CASE ( 11 )
208
209	#if defined ( __check )
210	!
211	!-- In case of a prior parameter file check, the p3d data is stored in
212	!-- PARIN, while the p3df is stored in PARINF. This only applies to
213	!-- check_namelist_files!
214	IF ( check_restart == 2 ) THEN
215	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
216	STATUS='OLD' )
217	ELSE
218	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
219	STATUS='OLD' )
220	END IF
221	#else
222
223	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
224	STATUS='OLD' )
225	#endif
226
227	CASE ( 13 )
228
229	IF ( myid_char == '' ) THEN
230	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
231	FORM='UNFORMATTED', STATUS='OLD' )
232	ELSE
233	!
234	!-- First opening of unit 13 openes file _0000 on all PEs because only
235	!-- this file contains the global variables
236	IF ( .NOT. openfile(file_id)%opened_before ) THEN
237	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
238	FORM='UNFORMATTED', STATUS='OLD' )
239	ELSE
240	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
241	FORM='UNFORMATTED', STATUS='OLD' )
242	ENDIF
243	ENDIF
244
245	CASE ( 14 )
246
247	IF ( myid_char == '' ) THEN
248	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
249	FORM='UNFORMATTED', POSITION='APPEND' )
250	ELSE
251	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
252	CALL local_system( 'mkdir BINOUT' // coupling_char )
253	ENDIF
254	#if defined( __parallel ) && ! defined ( __check )
255	!
256	!-- Set a barrier in order to allow that all other processors in the
257	!-- directory created by PE0 can open their file
258	CALL MPI_BARRIER( comm2d, ierr )
259	#endif
260	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
261	FORM='UNFORMATTED' )
262	ENDIF
263
264	CASE ( 15 )
265
266	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
267
268	CASE ( 16 )
269
270	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
271
272	CASE ( 17 )
273
274	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
275
276	CASE ( 18 )
277
278	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
279
280	CASE ( 19 )
281
282	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
283
284	CASE ( 20 )
285
286	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
287	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
288	ENDIF
289	IF ( myid_char == '' ) THEN
290	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
291	FORM='UNFORMATTED', POSITION='APPEND' )
292	ELSE
293	#if defined( __parallel ) && ! defined ( __check )
294	!
295	!-- Set a barrier in order to allow that all other processors in the
296	!-- directory created by PE0 can open their file
297	CALL MPI_BARRIER( comm2d, ierr )
298	#endif
299	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
300	FORM='UNFORMATTED', POSITION='APPEND' )
301	ENDIF
302
303	CASE ( 21 )
304
305	IF ( data_output_2d_on_each_pe ) THEN
306	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
307	FORM='UNFORMATTED', POSITION='APPEND' )
308	ELSE
309	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
310	FORM='UNFORMATTED', POSITION='APPEND' )
311	ENDIF
312
313	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
314	!
315	!-- Output for combine_plot_fields
316	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
317	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
318	WRITE (21) 0, nx+1, 0, ny+1 ! output part
319	ENDIF
320	!
321	!-- Determine and write ISO2D coordiante header
322	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
323	hu = 0.0
324	ho = (ny+1) * dy
325	DO i = 1, ny
326	eta(i) = REAL( i ) / ( ny + 1.0 )
327	ENDDO
328	eta(0) = 0.0
329	eta(ny+1) = 1.0
330
331	WRITE (21) dx,eta,hu,ho
332	DEALLOCATE( eta, ho, hu )
333
334	!
335	!-- Create output file for local parameters
336	IF ( iso2d_output ) THEN
337	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
338	FORM='FORMATTED', DELIM='APOSTROPHE' )
339	openfile(27)%opened = .TRUE.
340	ENDIF
341
342	ENDIF
343
344	CASE ( 22 )
345
346	IF ( data_output_2d_on_each_pe ) THEN
347	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
348	FORM='UNFORMATTED', POSITION='APPEND' )
349	ELSE
350	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
351	POSITION='APPEND' )
352	ENDIF
353
354	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
355	!
356	!-- Output for combine_plot_fields
357	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
358	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
359	WRITE (22) 0, nx+1, 0, nz+1 ! output part
360	ENDIF
361	!
362	!-- Determine and write ISO2D coordiante header
363	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
364	hu = 0.0
365	ho = zu(nz+1)
366	DO i = 1, nz
367	eta(i) = REAL( zu(i) ) / zu(nz+1)
368	ENDDO
369	eta(0) = 0.0
370	eta(nz+1) = 1.0
371
372	WRITE (22) dx,eta,hu,ho
373	DEALLOCATE( eta, ho, hu )
374	!
375	!-- Create output file for local parameters
376	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
377	FORM='FORMATTED', DELIM='APOSTROPHE' )
378	openfile(28)%opened = .TRUE.
379
380	ENDIF
381
382	CASE ( 23 )
383
384	IF ( data_output_2d_on_each_pe ) THEN
385	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
386	FORM='UNFORMATTED', POSITION='APPEND' )
387	ELSE
388	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
389	POSITION='APPEND' )
390	ENDIF
391
392	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
393	!
394	!-- Output for combine_plot_fields
395	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
396	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
397	WRITE (23) 0, ny+1, 0, nz+1 ! output part
398	ENDIF
399	!
400	!-- Determine and write ISO2D coordiante header
401	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
402	hu = 0.0
403	ho = zu(nz+1)
404	DO i = 1, nz
405	eta(i) = REAL( zu(i) ) / zu(nz+1)
406	ENDDO
407	eta(0) = 0.0
408	eta(nz+1) = 1.0
409
410	WRITE (23) dx,eta,hu,ho
411	DEALLOCATE( eta, ho, hu )
412	!
413	!-- Create output file for local parameters
414	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
415	FORM='FORMATTED', DELIM='APOSTROPHE' )
416	openfile(29)%opened = .TRUE.
417
418	ENDIF
419
420	CASE ( 30 )
421
422	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
423	FORM='UNFORMATTED' )
424	!
425	!-- Write coordinate file for AVS
426	IF ( myid == 0 ) THEN
427	#if defined( __parallel )
428	!
429	!-- Specifications for combine_plot_fields
430	IF ( .NOT. do3d_compress ) THEN
431	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
432	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
433	ENDIF
434	#endif
435	!
436	!-- Write coordinate file for AVS:
437	!-- First determine file names (including cyle numbers) of AVS files on
438	!-- target machine (to which the files are to be transferred).
439	!-- Therefore path information has to be obtained first.
440	IF ( avs_output ) THEN
441	iaddres = LEN_TRIM( return_addres )
442	iusern = LEN_TRIM( return_username )
443
444	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
445	DO WHILE ( .NOT. avs_coor_file_found .OR. &
446	.NOT. avs_data_file_found )
447
448	READ ( 3, '(A)', END=1 ) zeile
449
450	SELECT CASE ( zeile(1:11) )
451
452	CASE ( 'PLOT3D_COOR' )
453	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
454	avs_coor_file_localname
455	avs_coor_file_found = .TRUE.
456
457	CASE ( 'PLOT3D_DATA' )
458	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
459	avs_data_file_localname
460	avs_data_file_found = .TRUE.
461
462	CASE DEFAULT
463	READ ( 3, '(A/A)' ) zeile, zeile
464
465	END SELECT
466
467	ENDDO
468	!
469	!-- Now the cycle numbers on the remote machine must be obtained
470	!-- using batch_scp
471	1 CLOSE ( 3 )
472	IF ( .NOT. avs_coor_file_found .OR. &
473	.NOT. avs_data_file_found ) THEN
474	message_string= 'no filename for AVS-data-file ' // &
475	'found in MRUN-config-file' // &
476	' &filename in FLD-file set to "unknown"'
477	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
478
479	avs_coor_file = 'unknown'
480	avs_data_file = 'unknown'
481	ELSE
482	get_filenames = .TRUE.
483	IF ( TRIM( host ) == 'hpmuk' .OR. &
484	TRIM( host ) == 'lcmuk' ) THEN
485	batch_scp = '/home/raasch/pub/batch_scp'
486	ELSEIF ( TRIM( host ) == 'nech' ) THEN
487	batch_scp = '/ipf/b/b323011/pub/batch_scp'
488	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
489	TRIM( host ) == 'ibmb' ) THEN
490	batch_scp = '/home/h/niksiraa/pub/batch_scp'
491	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
492	batch_scp = '/home/nhbksira/pub/batch_scp'
493	ELSE
494	message_string= 'no path for batch_scp on host "' // &
495	TRIM( host ) // '"'
496	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
497	get_filenames = .FALSE.
498	ENDIF
499
500	IF ( get_filenames ) THEN
501	!
502	!-- Determine the coordinate file name.
503	!-- /etc/passwd serves as Dummy-Datei, because it is not
504	!-- really transferred.
505	command = TRIM( batch_scp ) // ' -n -u ' // &
506	return_username(1:iusern) // ' ' // &
507	return_addres(1:iaddres) // ' /etc/passwd "' // &
508	TRIM( avs_coor_file_catalog ) // '" ' // &
509	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
510
511	CALL local_system( command )
512	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
513	READ ( 3, '(A)' ) avs_coor_file
514	CLOSE ( 3 )
515	!
516	!-- Determine the data file name
517	command = TRIM( batch_scp ) // ' -n -u ' // &
518	return_username(1:iusern) // ' ' // &
519	return_addres(1:iaddres) // ' /etc/passwd "' // &
520	TRIM( avs_data_file_catalog ) // '" ' // &
521	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
522
523	CALL local_system( command )
524	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
525	READ ( 3, '(A)' ) avs_data_file
526	CLOSE ( 3 )
527
528	ELSE
529
530	avs_coor_file = 'unknown'
531	avs_data_file = 'unknown'
532
533	ENDIF
534
535	ENDIF
536
537	!
538	!-- Output of the coordinate file description for FLD-file
539	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
540	openfile(33)%opened = .TRUE.
541	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
542	TRIM( avs_coor_file ), (nx+2nbgp)4, &
543	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
544
545
546	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
547	DO i = 0, nx+1
548	xkoor(i) = i * dx
549	ENDDO
550	DO j = 0, ny+1
551	ykoor(j) = j * dy
552	ENDDO
553	DO k = 0, nz_do3d
554	zkoor(k) = zu(k)
555	ENDDO
556
557	!
558	!-- Create and write on AVS coordinate file
559	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
560	openfile(31)%opened = .TRUE.
561
562	WRITE (31) xkoor, ykoor, zkoor
563	DEALLOCATE( xkoor, ykoor, zkoor )
564
565	!
566	!-- Create FLD file (being written on in close_file)
567	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
568	openfile(32)%opened = .TRUE.
569
570	!
571	!-- Create flag file for compressed 3D output,
572	!-- influences output commands in mrun
573	IF ( do3d_compress ) THEN
574	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
575	WRITE ( 3, '(1X)' )
576	CLOSE ( 3 )
577	ENDIF
578
579	ENDIF
580
581	ENDIF
582
583	!
584	!-- In case of data compression output of the coordinates of the
585	!-- corresponding partial array of a PE only once at the top of the file
586	IF ( avs_output .AND. do3d_compress ) THEN
587	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
588	ENDIF
589
590	CASE ( 50:59 )
591
592	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
593	suffix = ''
594	ELSE
595	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
596	ENDIF
597	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
598	TRIM( suffix ), &
599	FORM='FORMATTED', RECL=496 )
600	!
601	!-- Write PROFIL parameter file for output of time series
602	!-- NOTE: To be on the safe side, this output is done at the beginning of
603	!-- the model run (in case of collapse) and it is repeated in
604	!-- close_file, then, however, with value ranges for the coordinate
605	!-- systems
606	!
607	!-- Firstly determine the number of the coordinate systems to be drawn
608	cranz = 0
609	DO j = 1, 10
610	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
611	ENDDO
612	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
613	TRIM( region( file_id - 50 ) )
614	!
615	!-- Write RAHMEN parameter
616	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
617	TRIM( suffix ), &
618	FORM='FORMATTED', DELIM='APOSTROPHE' )
619	WRITE ( 90, RAHMEN )
620	!
621	!-- Determine and write CROSS parameters for the individual coordinate
622	!-- systems
623	DO j = 1, 10
624	k = cross_ts_number_count(j)
625	IF ( k /= 0 ) THEN
626	!
627	!-- Store curve numbers, colours and line style
628	klist(1:k) = cross_ts_numbers(1:k,j)
629	klist(k+1:10) = 999999
630	!
631	!-- Write CROSS parameter
632	WRITE ( 90, CROSS )
633
634	ENDIF
635	ENDDO
636
637	CLOSE ( 90 )
638	!
639	!-- Write all labels at the top of the data file, but only during the
640	!-- first run of a sequence of jobs. The following jobs copy the time
641	!-- series data to the bottom of that file.
642	IF ( runnr == 0 ) THEN
643	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
644	' ' // TRIM( region( file_id - 50 ) )
645	ENDIF
646
647
648	CASE ( 80 )
649
650	IF ( myid_char == '' ) THEN
651	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
652	FORM='FORMATTED', POSITION='APPEND' )
653	ELSE
654	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
655	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
656	ENDIF
657	#if defined( __parallel ) && ! defined ( __check )
658	!
659	!-- Set a barrier in order to allow that thereafter all other
660	!-- processors in the directory created by PE0 can open their file.
661	!-- WARNING: The following barrier will lead to hanging jobs, if
662	!-- check_open is first called from routine
663	!-- allocate_prt_memory!
664	IF ( .NOT. openfile(80)%opened_before ) THEN
665	CALL MPI_BARRIER( comm2d, ierr )
666	ENDIF
667	#endif
668	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
669	myid_char, &
670	FORM='FORMATTED', POSITION='APPEND' )
671	ENDIF
672
673	IF ( .NOT. openfile(80)%opened_before ) THEN
674	WRITE ( 80, 8000 ) TRIM( run_description_header )
675	ENDIF
676
677	CASE ( 81 )
678
679	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
680	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
681
682	CASE ( 82 )
683
684	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
685	POSITION = 'APPEND' )
686
687	CASE ( 83 )
688
689	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
690	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
691
692	CASE ( 84 )
693
694	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
695	POSITION='APPEND' )
696
697	CASE ( 85 )
698
699	IF ( myid_char == '' ) THEN
700	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
701	FORM='UNFORMATTED', POSITION='APPEND' )
702	ELSE
703	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
704	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
705	ENDIF
706	#if defined( __parallel ) && ! defined ( __check )
707	!
708	!-- Set a barrier in order to allow that thereafter all other
709	!-- processors in the directory created by PE0 can open their file
710	CALL MPI_BARRIER( comm2d, ierr )
711	#endif
712	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
713	myid_char, &
714	FORM='UNFORMATTED', POSITION='APPEND' )
715	ENDIF
716
717	IF ( .NOT. openfile(85)%opened_before ) THEN
718	WRITE ( 85 ) run_description_header
719	!
720	!-- Attention: change version number whenever the output format on
721	!-- unit 85 is changed (see also in routine
722	!-- lpm_data_output_particles)
723	rtext = 'data format version 3.0'
724	WRITE ( 85 ) rtext
725	WRITE ( 85 ) number_of_particle_groups, &
726	max_number_of_particle_groups
727	WRITE ( 85 ) particle_groups
728	ENDIF
729
730	#if defined( __netcdf )
731	CASE ( 101, 111 )
732	!
733	!-- Set filename depending on unit number
734	IF ( file_id == 101 ) THEN
735	filename = 'DATA_2D_XY_NETCDF' // coupling_char
736	av = 0
737	ELSE
738	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
739	av = 1
740	ENDIF
741	!
742	!-- Inquire, if there is a netCDF file from a previuos run. This should
743	!-- be opened for extension, if its dimensions and variables match the
744	!-- actual run.
745	INQUIRE( FILE=filename, EXIST=netcdf_extend )
746
747	IF ( netcdf_extend ) THEN
748	!
749	!-- Open an existing netCDF file for output
750	CALL open_write_netcdf_file( filename, id_set_xy(av), .TRUE., 20 )
751	!
752	!-- Read header information and set all ids. If there is a mismatch
753	!-- between the previuos and the actual run, netcdf_extend is returned
754	!-- as .FALSE.
755	CALL define_netcdf_header( 'xy', netcdf_extend, av )
756
757	!
758	!-- Remove the local file, if it can not be extended
759	IF ( .NOT. netcdf_extend ) THEN
760	nc_stat = NF90_CLOSE( id_set_xy(av) )
761	CALL handle_netcdf_error( 'check_open', 21 )
762	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
763	ENDIF
764
765	ENDIF
766
767	IF ( .NOT. netcdf_extend ) THEN
768	!
769	!-- Create a new netCDF output file with requested netCDF format
770	CALL create_netcdf_file( filename, id_set_xy(av), .TRUE., 22 )
771
772	!
773	!-- Define the header
774	CALL define_netcdf_header( 'xy', netcdf_extend, av )
775
776	!
777	!-- In case of parallel netCDF output, create flag file which tells
778	!-- combine_plot_fields that nothing is to do.
779	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
780	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
781	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
782	CLOSE( 99 )
783	ENDIF
784
785	ENDIF
786
787	CASE ( 102, 112 )
788	!
789	!-- Set filename depending on unit number
790	IF ( file_id == 102 ) THEN
791	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
792	av = 0
793	ELSE
794	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
795	av = 1
796	ENDIF
797	!
798	!-- Inquire, if there is a netCDF file from a previuos run. This should
799	!-- be opened for extension, if its dimensions and variables match the
800	!-- actual run.
801	INQUIRE( FILE=filename, EXIST=netcdf_extend )
802
803	IF ( netcdf_extend ) THEN
804	!
805	!-- Open an existing netCDF file for output
806	CALL open_write_netcdf_file( filename, id_set_xz(av), .TRUE., 23 )
807	!
808	!-- Read header information and set all ids. If there is a mismatch
809	!-- between the previuos and the actual run, netcdf_extend is returned
810	!-- as .FALSE.
811	CALL define_netcdf_header( 'xz', netcdf_extend, av )
812
813	!
814	!-- Remove the local file, if it can not be extended
815	IF ( .NOT. netcdf_extend ) THEN
816	nc_stat = NF90_CLOSE( id_set_xz(av) )
817	CALL handle_netcdf_error( 'check_open', 24 )
818	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
819	ENDIF
820
821	ENDIF
822
823	IF ( .NOT. netcdf_extend ) THEN
824	!
825	!-- Create a new netCDF output file with requested netCDF format
826	CALL create_netcdf_file( filename, id_set_xz(av), .TRUE., 25 )
827
828	!
829	!-- Define the header
830	CALL define_netcdf_header( 'xz', netcdf_extend, av )
831
832	!
833	!-- In case of parallel netCDF output, create flag file which tells
834	!-- combine_plot_fields that nothing is to do.
835	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
836	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
837	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
838	CLOSE( 99 )
839	ENDIF
840
841	ENDIF
842
843	CASE ( 103, 113 )
844	!
845	!-- Set filename depending on unit number
846	IF ( file_id == 103 ) THEN
847	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
848	av = 0
849	ELSE
850	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
851	av = 1
852	ENDIF
853	!
854	!-- Inquire, if there is a netCDF file from a previuos run. This should
855	!-- be opened for extension, if its dimensions and variables match the
856	!-- actual run.
857	INQUIRE( FILE=filename, EXIST=netcdf_extend )
858
859	IF ( netcdf_extend ) THEN
860	!
861	!-- Open an existing netCDF file for output
862	CALL open_write_netcdf_file( filename, id_set_yz(av), .TRUE., 26 )
863	!
864	!-- Read header information and set all ids. If there is a mismatch
865	!-- between the previuos and the actual run, netcdf_extend is returned
866	!-- as .FALSE.
867	CALL define_netcdf_header( 'yz', netcdf_extend, av )
868
869	!
870	!-- Remove the local file, if it can not be extended
871	IF ( .NOT. netcdf_extend ) THEN
872	nc_stat = NF90_CLOSE( id_set_yz(av) )
873	CALL handle_netcdf_error( 'check_open', 27 )
874	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
875	ENDIF
876
877	ENDIF
878
879	IF ( .NOT. netcdf_extend ) THEN
880	!
881	!-- Create a new netCDF output file with requested netCDF format
882	CALL create_netcdf_file( filename, id_set_yz(av), .TRUE., 28 )
883
884	!
885	!-- Define the header
886	CALL define_netcdf_header( 'yz', netcdf_extend, av )
887
888	!
889	!-- In case of parallel netCDF output, create flag file which tells
890	!-- combine_plot_fields that nothing is to do.
891	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
892	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
893	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
894	CLOSE( 99 )
895	ENDIF
896
897	ENDIF
898
899	CASE ( 104 )
900	!
901	!-- Set filename
902	filename = 'DATA_1D_PR_NETCDF' // coupling_char
903
904	!
905	!-- Inquire, if there is a netCDF file from a previuos run. This should
906	!-- be opened for extension, if its variables match the actual run.
907	INQUIRE( FILE=filename, EXIST=netcdf_extend )
908
909	IF ( netcdf_extend ) THEN
910	!
911	!-- Open an existing netCDF file for output
912	CALL open_write_netcdf_file( filename, id_set_pr, .FALSE., 29 )
913	!
914	!-- Read header information and set all ids. If there is a mismatch
915	!-- between the previuos and the actual run, netcdf_extend is returned
916	!-- as .FALSE.
917	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
918
919	!
920	!-- Remove the local file, if it can not be extended
921	IF ( .NOT. netcdf_extend ) THEN
922	nc_stat = NF90_CLOSE( id_set_pr )
923	CALL handle_netcdf_error( 'check_open', 30 )
924	CALL local_system( 'rm ' // TRIM( filename ) )
925	ENDIF
926
927	ENDIF
928
929	IF ( .NOT. netcdf_extend ) THEN
930	!
931	!-- Create a new netCDF output file with requested netCDF format
932	CALL create_netcdf_file( filename, id_set_pr, .FALSE., 31 )
933	!
934	!-- Define the header
935	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
936
937	ENDIF
938
939	CASE ( 105 )
940	!
941	!-- Set filename
942	filename = 'DATA_1D_TS_NETCDF' // coupling_char
943
944	!
945	!-- Inquire, if there is a netCDF file from a previuos run. This should
946	!-- be opened for extension, if its variables match the actual run.
947	INQUIRE( FILE=filename, EXIST=netcdf_extend )
948
949	IF ( netcdf_extend ) THEN
950	!
951	!-- Open an existing netCDF file for output
952	CALL open_write_netcdf_file( filename, id_set_ts, .FALSE., 32 )
953	!
954	!-- Read header information and set all ids. If there is a mismatch
955	!-- between the previuos and the actual run, netcdf_extend is returned
956	!-- as .FALSE.
957	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
958
959	!
960	!-- Remove the local file, if it can not be extended
961	IF ( .NOT. netcdf_extend ) THEN
962	nc_stat = NF90_CLOSE( id_set_ts )
963	CALL handle_netcdf_error( 'check_open', 33 )
964	CALL local_system( 'rm ' // TRIM( filename ) )
965	ENDIF
966
967	ENDIF
968
969	IF ( .NOT. netcdf_extend ) THEN
970	!
971	!-- Create a new netCDF output file with requested netCDF format
972	CALL create_netcdf_file( filename, id_set_ts, .FALSE., 34 )
973	!
974	!-- Define the header
975	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
976
977	ENDIF
978
979
980	CASE ( 106, 116 )
981	!
982	!-- Set filename depending on unit number
983	IF ( file_id == 106 ) THEN
984	filename = 'DATA_3D_NETCDF' // coupling_char
985	av = 0
986	ELSE
987	filename = 'DATA_3D_AV_NETCDF' // coupling_char
988	av = 1
989	ENDIF
990	!
991	!-- Inquire, if there is a netCDF file from a previous run. This should
992	!-- be opened for extension, if its dimensions and variables match the
993	!-- actual run.
994	INQUIRE( FILE=filename, EXIST=netcdf_extend )
995
996	IF ( netcdf_extend ) THEN
997	!
998	!-- Open an existing netCDF file for output
999	CALL open_write_netcdf_file( filename, id_set_3d(av), .TRUE., 35 )
1000	!
1001	!-- Read header information and set all ids. If there is a mismatch
1002	!-- between the previuos and the actual run, netcdf_extend is returned
1003	!-- as .FALSE.
1004	CALL define_netcdf_header( '3d', netcdf_extend, av )
1005
1006	!
1007	!-- Remove the local file, if it can not be extended
1008	IF ( .NOT. netcdf_extend ) THEN
1009	nc_stat = NF90_CLOSE( id_set_3d(av) )
1010	CALL handle_netcdf_error( 'check_open', 36 )
1011	CALL local_system('rm ' // TRIM( filename ) )
1012	ENDIF
1013
1014	ENDIF
1015
1016	IF ( .NOT. netcdf_extend ) THEN
1017	!
1018	!-- Create a new netCDF output file with requested netCDF format
1019	CALL create_netcdf_file( filename, id_set_3d(av), .TRUE., 37 )
1020
1021	!
1022	!-- Define the header
1023	CALL define_netcdf_header( '3d', netcdf_extend, av )
1024
1025	!
1026	!-- In case of parallel netCDF output, create flag file which tells
1027	!-- combine_plot_fields that nothing is to do.
1028	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
1029	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1030	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1031	CLOSE( 99 )
1032	ENDIF
1033
1034	ENDIF
1035
1036
1037	CASE ( 107 )
1038	!
1039	!-- Set filename
1040	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1041
1042	!
1043	!-- Inquire, if there is a netCDF file from a previuos run. This should
1044	!-- be opened for extension, if its variables match the actual run.
1045	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1046
1047	IF ( netcdf_extend ) THEN
1048	!
1049	!-- Open an existing netCDF file for output
1050	CALL open_write_netcdf_file( filename, id_set_sp, .FALSE., 38 )
1051
1052	!
1053	!-- Read header information and set all ids. If there is a mismatch
1054	!-- between the previuos and the actual run, netcdf_extend is returned
1055	!-- as .FALSE.
1056	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1057
1058	!
1059	!-- Remove the local file, if it can not be extended
1060	IF ( .NOT. netcdf_extend ) THEN
1061	nc_stat = NF90_CLOSE( id_set_sp )
1062	CALL handle_netcdf_error( 'check_open', 39 )
1063	CALL local_system( 'rm ' // TRIM( filename ) )
1064	ENDIF
1065
1066	ENDIF
1067
1068	IF ( .NOT. netcdf_extend ) THEN
1069	!
1070	!-- Create a new netCDF output file with requested netCDF format
1071	CALL create_netcdf_file( filename, id_set_sp, .FALSE., 40 )
1072	!
1073	!-- Define the header
1074	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1075
1076	ENDIF
1077
1078
1079	CASE ( 108 )
1080
1081	IF ( myid_char == '' ) THEN
1082	filename = 'DATA_PRT_NETCDF' // coupling_char
1083	ELSE
1084	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1085	myid_char
1086	ENDIF
1087	!
1088	!-- Inquire, if there is a netCDF file from a previuos run. This should
1089	!-- be opened for extension, if its variables match the actual run.
1090	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1091
1092	IF ( netcdf_extend ) THEN
1093	!
1094	!-- Open an existing netCDF file for output
1095	CALL open_write_netcdf_file( filename, id_set_prt, .FALSE., 41 )
1096	!
1097	!-- Read header information and set all ids. If there is a mismatch
1098	!-- between the previuos and the actual run, netcdf_extend is returned
1099	!-- as .FALSE.
1100	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1101
1102	!
1103	!-- Remove the local file, if it can not be extended
1104	IF ( .NOT. netcdf_extend ) THEN
1105	nc_stat = NF90_CLOSE( id_set_prt )
1106	CALL handle_netcdf_error( 'check_open', 42 )
1107	CALL local_system( 'rm ' // filename )
1108	ENDIF
1109
1110	ENDIF
1111
1112	IF ( .NOT. netcdf_extend ) THEN
1113
1114	!
1115	!-- For runs on multiple processors create the subdirectory
1116	IF ( myid_char /= '' ) THEN
1117	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1118	THEN ! needs modification in case of non-extendable sets
1119	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1120	TRIM( coupling_char ) // '/' )
1121	ENDIF
1122	#if defined( __parallel ) && ! defined ( __check )
1123	!
1124	!-- Set a barrier in order to allow that all other processors in the
1125	!-- directory created by PE0 can open their file
1126	CALL MPI_BARRIER( comm2d, ierr )
1127	#endif
1128	ENDIF
1129
1130	!
1131	!-- Create a new netCDF output file with requested netCDF format
1132	CALL create_netcdf_file( filename, id_set_prt, .FALSE., 43 )
1133
1134	!
1135	!-- Define the header
1136	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1137
1138	ENDIF
1139
1140	CASE ( 109 )
1141	!
1142	!-- Set filename
1143	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1144
1145	!
1146	!-- Inquire, if there is a netCDF file from a previuos run. This should
1147	!-- be opened for extension, if its variables match the actual run.
1148	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1149
1150	IF ( netcdf_extend ) THEN
1151	!
1152	!-- Open an existing netCDF file for output
1153	CALL open_write_netcdf_file( filename, id_set_pts, .FALSE., 393 )
1154	!
1155	!-- Read header information and set all ids. If there is a mismatch
1156	!-- between the previuos and the actual run, netcdf_extend is returned
1157	!-- as .FALSE.
1158	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1159
1160	!
1161	!-- Remove the local file, if it can not be extended
1162	IF ( .NOT. netcdf_extend ) THEN
1163	nc_stat = NF90_CLOSE( id_set_pts )
1164	CALL handle_netcdf_error( 'check_open', 394 )
1165	CALL local_system( 'rm ' // TRIM( filename ) )
1166	ENDIF
1167
1168	ENDIF
1169
1170	IF ( .NOT. netcdf_extend ) THEN
1171	!
1172	!-- Create a new netCDF output file with requested netCDF format
1173	CALL create_netcdf_file( filename, id_set_pts, .FALSE., 395 )
1174	!
1175	!-- Define the header
1176	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1177
1178	ENDIF
1179
1180	CASE ( 201:200+2*max_masks )
1181	!
1182	!-- Set filename depending on unit number
1183	IF ( file_id <= 200+max_masks ) THEN
1184	mid = file_id - 200
1185	WRITE ( mask_char,'(I2.2)') mid
1186	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1187	av = 0
1188	ELSE
1189	mid = file_id - (200+max_masks)
1190	WRITE ( mask_char,'(I2.2)') mid
1191	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1192	coupling_char
1193	av = 1
1194	ENDIF
1195	!
1196	!-- Inquire, if there is a netCDF file from a previuos run. This should
1197	!-- be opened for extension, if its dimensions and variables match the
1198	!-- actual run.
1199	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1200
1201	IF ( netcdf_extend ) THEN
1202	!
1203	!-- Open an existing netCDF file for output
1204	CALL open_write_netcdf_file( filename, id_set_mask(mid,av), &
1205	.TRUE., 456 )
1206	!
1207	!-- Read header information and set all ids. If there is a mismatch
1208	!-- between the previuos and the actual run, netcdf_extend is returned
1209	!-- as .FALSE.
1210	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1211
1212	!
1213	!-- Remove the local file, if it can not be extended
1214	IF ( .NOT. netcdf_extend ) THEN
1215	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1216	CALL handle_netcdf_error( 'check_open', 457 )
1217	CALL local_system('rm ' // TRIM( filename ) )
1218	ENDIF
1219
1220	ENDIF
1221
1222	IF ( .NOT. netcdf_extend ) THEN
1223	!
1224	!-- Create a new netCDF output file with requested netCDF format
1225	CALL create_netcdf_file( filename, id_set_mask(mid,av), .TRUE., 458 )
1226	!
1227	!-- Define the header
1228	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1229
1230	ENDIF
1231
1232
1233	#else
1234
1235	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1236
1237	!
1238	!-- Nothing is done in case of missing netcdf support
1239	RETURN
1240
1241	#endif
1242
1243	CASE DEFAULT
1244
1245	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1246	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1247
1248	END SELECT
1249
1250	!
1251	!-- Set open flag
1252	openfile(file_id)%opened = .TRUE.
1253
1254	!
1255	!-- Formats
1256	3300 FORMAT ('#'/ &
1257	'coord 1 file=',A,' filetype=unformatted'/ &
1258	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1259	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1260	'#')
1261	4000 FORMAT ('# ',A)
1262	5000 FORMAT ('# ',A/ &
1263	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1264	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1265	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1266	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1267	8000 FORMAT (A/ &
1268	' step time # of parts lPE sent/recv rPE sent/recv ',&
1269	'sPE sent/recv nPE sent/recv max # of parts'/ &
1270	103('-'))
1271
1272	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |