Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 320

Last change on this file since 320 was 312, checked in by raasch, 16 years ago
adjustments for IBM at DKRZ (ibmh)
Property svn:keywords set to `Id Rev`
File size: 41.9 KB

Line
1	#!/bin/ksh
2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
3	# $Id: subjob 312 2009-05-12 10:54:28Z letzel $
4
5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
7	# Host zurueckgeschickt werden sollen
8
9
10	# letzte Aenderung:
11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
13	# 06/02/98 - Siggi - berte validiert
14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
15	# moeglich
16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
19	# allgemeine Anpassungen fuer ibm-Rechner
20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
21	# Ruecktransfer des Jobprotokolls fuer diese
22	# Maschine abgeschaltet
23	# 31/10/02 - Siggi - berni validiert
24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
25	# 08/11/02 - Siggi - quanero validiert
26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
27	# 23/01/03 - Siggi - hostname nobel changed to nobela
28	# 06/02/03 - Siggi - gregale validated
29	# 12/02/03 - Siggi - orkan and maestro validated
30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
31	# 12/03/03 - Siggi - nec at DKRZ validated
32	# 13/03/03 - Siggi - new nqs resource variable Memory
33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
34	# node
35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
37	# cxxl added to ibmh
38	# 29/08/03 - Siggi - changes in job queues and communication system on
39	# ibms
40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
41	# 30/10/03 - Siggi - nech is not supported any more
42	# 10/11/03 - Siggi - nech2 renamed to nech
43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
45	# 31/03/04 - Siggi - new option -N for node usage
46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
47	# due to error in ssh installation (otherwise a prompt
48	# for the password appears)
49	# 23/07/04 - Siggi - changes due to the new berni configuration
50	# (federation switch)
51	# 01/09/04 - Gerald new job-classes on hanni
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
54	# 03/12/04 - Siggi - notification on ibm switched of in case of
55	# delete_dayfile = true, node usage in cdev set to
56	# shared
57	# 16/02/05 - Gerald hababai validated
58	# 29/03/05 - Micha - new job class channi on hanni
59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
60	# on ibms
61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
62	# p_normal
63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
65	# "sn_all", new job class cexp
66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
68	# hurricane (with -X0)
69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
70	# added
71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
72	# 09/02/06 - Siggi - ibmy admitted
73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 18/04/06 - Siggi - new option -O for OpenMP usage
76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
80	# 28/11/06 - Siggi - levanto admitted
81	# 13/02/07 - Siggi - hpmuk releated code removed
82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
84	# 27/07/07 - Siggi - autan admitted
85	# 03/08/07 - Marcus- lcfimm admitted
86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
88	# suggestions
89	# 19/10/07 - Marcus- add new optional argument -g group_number
90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
91	# 30/10/07 - Marcus- further adjustments for queues on lctit
92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
93	# Science)
94	# 14/07/08 - Siggi - adjustments for lcsgih
95	# 23/09/08 - Gerald- paesano admitted
96	# 02/10/08 - Siggi - PBS adjustments for lcxt4
97	# 02/03/09 - Siggi - Adjustments for new NEC-SX9 at RIAM
98	# 16/04/09 - Marcus- Adjustments for lcsgib and lcsgih
99	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
100
101
102
103	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
104	delete_dayfile=false
105	group_number=none
106	locat=normal
107	no_default_queue=none
108	no_submit=false
109	job_catalog="~/job_queue"
110	job_name=none
111	local_user=$LOGNAME
112	node_usage=shared
113	numprocs=1
114	punkte="..........................................................."
115	submcom=qsub
116	queue=default
117	remote_host=none
118	remote_user=""
119	verify=true
120
121	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
122	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
123	typeset -L20 spalte1
124	typeset -R40 spalte2
125	typeset -L60 spalte3
126
127
128
129	# FEHLERBEHANDLUNG
130	# BEI EXIT:
131	trap 'if [[ $locat != normal ]]
132	then
133	case $locat in
134	(option) printf "\n --> available optios can be displayed"
135	printf " by typing:"
136	printf "\n \"subjob ?\" \n";;
137	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
138	(*) printf "\n +++ unknown error"
139	printf "\n please inform S. Raasch!\n"
140	esac
141	[[ -f $job_to_send ]] && rm $job_to_send
142	printf "\n\n+++ SUBJOB killed \n\n"
143	fi' exit
144
145
146	# BEI TERMINAL-BREAK:
147	trap '[[ -f $job_to_send ]] && rm $job_to_send
148	printf "\n\n+++ SUBJOB killed \n\n"
149	exit
150	' 2
151
152
153
154
155	# LOKALEN HOSTNAMEN FESTSTELLEN
156	local_host=$(hostname)
157
158
159
160	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
161	# UEBERHAUPT ZULAESSIG IST
162	case $local_host in
163	(atmos) local_addres=172.20.25.35; local_host=lcide;;
164	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
165	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
166	(bicegate1) local_addres=130.73.232.102; local_host=lcsgib;;
167	(bicegate2) local_addres=130.73.232.103; local_host=lcsgib;;
168	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
169	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
170	(b01*\|bicegate1) local_addres=130.73.232.102; local_host=lcsgib;;
171	(bicegate2) local_addres=130.73.232.103; local_host=lcsgib;;
172	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
173	(cs*) local_addres=136.172.44.131; local_host=nech;;
174	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
175	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
176	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
177	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
178	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
179	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
180	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
181	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
182	(h01*\|hicegate1) local_addres=130.75.4.102; local_host=lcsgih;;
183	(hicegate2) local_addres=130.75.4.103; local_host=lcsgih;;
184	(blizzard1) local_addres=136.172.40.15; local_host=ibmh;;
185	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
186	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
187	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
188	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
189	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
190	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
191	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
192	(paesano) local_addres=130.75.105.46; local_host=lcmuk;;
193	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
194	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
195	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
196	(sx-*) local_addres=172.16.1.131; local_host=necriam;;
197	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
198	(r2*) local_addres=130.73.232.102; local_host=lcsgib;;
199	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
200	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
201	(*) printf "\n +++ \"$local_host\" unknown";
202	printf "\n please inform S. Raasch!";
203	locat=parameter; exit;;
204	esac
205
206
207
208	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
209	remote_host=$local_host
210
211
212
213
214	# PROZEDUROPTIONEN EINLESEN
215	while getopts :c:dDg:h:m:n:N:O:q:t:T:u:vX: option
216	do
217	case $option in
218	(c) job_catalog=$OPTARG;;
219	(d) delete_dayfile=true;;
220	(D) no_submit=true;;
221	(g) group_number=$OPTARG;;
222	(h) remote_host=$OPTARG;;
223	(m) memory=$OPTARG;;
224	(n) job_name=$OPTARG;;
225	(N) node_usage=$OPTARG;;
226	(O) threads_per_task=$OPTARG;;
227	(q) no_default_queue=$OPTARG;;
228	(t) cputime=$OPTARG;;
229	(T) tasks_per_node=$OPTARG;;
230	(u) remote_user=$OPTARG;;
231	(v) verify=false;;
232	(X) numprocs=$OPTARG;;
233	(\?) printf "\n +++ Option $OPTARG unknown \n";
234	locat=option; exit;;
235	esac
236	done
237
238
239	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
240	shift OPTIND-1; file_to_send=$1
241
242
243	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
244	if [ "$1" = "?" ]
245	then
246	(printf "\n *** subjob can be called as follows:\n"
247	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
248	printf "\n Description of available options:\n"
249	printf "\n Option Description Default-Value"
250	printf "\n -c job-input- and output-catalog ~/job_queue"
251	printf "\n -d no job-protocol will be created ---"
252	printf "\n -D only the job-file will be created ---"
253	printf "\n -h execution host, available hosts: $remote_host"
254	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
255	printf "\n lctit, nech, necriam, unics"
256	printf "\n -m memory demand per process in MByte ---"
257	printf "\n -n jobname <jobdatei>"
258	printf "\n -O threads per task (for OpenMP usage) 1"
259	printf "\n -q job-queue to be used default"
260	printf "\n -t allowed cpu-time in seconds ---"
261	printf "\n -T tasks per node (on parallel hosts) ---"
262	printf "\n -u username on execution host from .netrc"
263	printf "\n -v no prompt for confirmation ---"
264	printf "\n -X # of processors (on parallel hosts) 1"
265	printf "\n "
266	printf "\n The only possible positional parameter is <jobfile>:"
267	printf "\n The complete NQS-job must be provided here."
268	printf "\n <jobfile>=? creates this outline\n\n") \| more
269	exit
270	fi
271
272
273
274	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
275	if [[ "$file_to_send" = "" ]]
276	then
277	printf "\n +++ job-file missing"
278	locat=parameter; exit
279	else
280	if [[ -f $file_to_send ]]
281	then
282	true
283	else
284	printf "\n +++ job-file: "
285	printf "\n $file_to_send"
286	printf "\n does not exist"
287	locat=parameter; exit
288	fi
289	fi
290
291
292
293	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
294	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
295	if [[ $job_name = none ]]
296	then
297	job_name=$file_to_send
298	fi
299	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
300	then
301	printf "\n +++ job-file name: "
302	printf "\n $job_name"
303	printf "\n must not contain \"/\"-characters"
304	locat=parameter; exit
305	fi
306
307
308
309
310	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
311	# ODER WENN HOST NICHT ANGEGEBEN WURDE
312	if [[ $remote_host = none ]]
313	then
314	printf "\n +++ host missing"
315	locat=option; exit
316	else
317	case $remote_host in
318	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
319	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
320	(ibmh) queue=no_class; remote_addres=136.172.40.15; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
321	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
322	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
323	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
324	(lcsgib) queue=smallq; remote_addres=130.73.232.103; submcom=/opt/moab/bin/msub;;
325	(lcsgih) queue=smallq; remote_addres=130.75.4.103; submcom=/opt/moab/bin/msub;;
326	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
327	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.3.0/bin/qsub;;
328	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
329	(necriam) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=172.16.1.131; submcom="/usr/bin/nqsII/qsub";;
330	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
331	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
332	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
333	locat=parameter; exit;;
334	esac
335	fi
336
337
338	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
339	if [[ $no_default_queue != none ]]
340	then
341	error=false
342	ndq=$no_default_queue
343	case $remote_host in
344	(ibm) case $ndq in
345	(p690_express\|p690_standard\|p690_long) error=false;;
346	(*) error=true;;
347	esac;;
348	(ibmb) case $ndq in
349	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
350	(*) error=true;;
351	esac;;
352	(ibmh) case $ndq in
353	(no_class) error=false;;
354	(*) error=true;;
355	esac;;
356	(ibms) case $ndq in
357	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
358	(*) error=true;;
359	esac;;
360	(ibmy) case $ndq in
361	(parallel) error=false;;
362	(*) error=true;;
363	esac;;
364	(lcsgib\|lcsgih) case $ndq in
365	(testq\|smallq\|bigq) error=false;;
366	(*) error=true;;
367	esac;;
368	(lctit) case $ndq in
369	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
370	(*) error=true;;
371	esac;;
372	(t3eb) case $ndq in
373	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
374	(*) error=true;;
375	esac;;
376	(necriam) case $ndq in
377	(SP\|SS\|P6) error=false;;
378	(*) error=true;;
379	esac;;
380	(t3eh) case $ndq in
381	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
382	(*) error=true;;
383	esac;;
384	(t3ej2\|t3ej5) case $ndq in
385	(low\|normal\|high) error=false;;
386	(*) error=true;;
387	esac;;
388	(t3es) case $ndq in
389	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
390	(*) error=true;;
391	esac;;
392	(unics) case $ndq in
393	(unics\|ht) error=false;;
394	(*) error=true;;
395	esac;;
396	esac
397	if [[ $error = true ]]
398	then
399	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
400	locat=parameter; exit
401	else
402	queue=$no_default_queue
403	fi
404	fi
405
406
407
408	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
409	if [[ $node_usage != shared && $queue = cdev ]]
410	then
411	node_usage=shared
412	fi
413
414
415
416	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
417	# AUFTEILEN
418	done=false
419	while [[ $done = false ]]
420	do
421	if (( $cputime <= 0 ))
422	then
423	printf "\n +++ wrong cpu-time or cpu-time missing"
424	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
425	printf "\n >>> "
426	read cputime 1>/dev/null 2>&1
427	else
428	done=true
429	fi
430	done
431	if [[ $remote_host = nech ]]
432	then
433	if (( tasks_per_node != 0 ))
434	then
435	(( cputime = cputime * tasks_per_node ))
436	elif [[ $numprocs != 0 ]]
437	then
438	(( cputime = cputime * numprocs ))
439	fi
440	fi
441	(( stunden = cputime / 3600 ))
442	(( resttime = cputime - stunden * 3600 ))
443	(( minuten = resttime / 60 ))
444	(( sekunden = resttime - minuten * 60 ))
445	timestring=${stunden}:${minuten}:${sekunden}
446
447
448
449	# PRUEFEN DER KERNSPEICHERANFORDERUNG
450	done=false
451	while [[ $done = false ]]
452	do
453	if (( memory <= 0 ))
454	then
455	printf "\n +++ wrong memory demand or memory demand missing"
456	printf "\n >>> Please type memory in MByte per process as INTEGER:"
457	printf "\n >>> "
458	read memory 1>/dev/null 2>&1
459	else
460	done=true
461	fi
462	done
463
464	if [[ $remote_host = nech \|\| $remote_host = necriam ]]
465	then
466	if (( tasks_per_node != 0 ))
467	then
468	(( Memory = memory * tasks_per_node / 1000 ))
469	elif [[ $numprocs != 0 ]]
470	then
471	(( Memory = memory * numprocs / 1000 ))
472	else
473	(( Memory = memory / 1000 ))
474	fi
475	fi
476
477
478	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
479	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
480	then
481	(( memory = memory * threads_per_task ))
482	fi
483
484
485	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
486	if (( tasks_per_node != 0 ))
487	then
488	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
489	fi
490
491
492
493	# HEADER-AUSGABE
494	if [[ $verify = true ]]
495	then
496	printf "\n\n"
497	printf "#--------------------------------------------------------------# \n"
498	spalte1=SUBJOB;spalte2=$(date)
499	printf "\| $spalte1$spalte2 \| \n"
500	printf "\| \| \n"
501	printf "\| values of parameters/options: \| \n"
502	spalte1=local_host$punkte; spalte2=$punkte$local_host
503	printf "\| $spalte1$spalte2 \| \n"
504	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
505	printf "\| $spalte1$spalte2 \| \n"
506	spalte1=queue$punkte; spalte2=$punkte$queue
507	printf "\| $spalte1$spalte2 \| \n"
508	spalte1=memory$punkte; spalte2="$punkte$memory mb"
509	printf "\| $spalte1$spalte2 \| \n"
510	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
511	printf "\| $spalte1$spalte2 \| \n"
512	spalte1=job_name$punkte; spalte2="$punkte$job_name"
513	printf "\| $spalte1$spalte2 \| \n"
514	printf "#--------------------------------------------------------------# \n\n"
515
516
517	# KONTROLLABFRAGE, OB ALLES O.K.
518	antwort="dummy"
519	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
520	do
521	read antwort?" >>> continue (y/n) ? "
522	done
523	if [[ $antwort = n \|\| $antwort = N ]]
524	then
525	locat=verify; exit
526	fi
527	printf "\n"
528	fi
529
530
531
532	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
533	kennung=$RANDOM
534	job_on_remhost=${job_name}_${kennung}_$local_host
535	job_to_send=job_to_send_$kennung
536	if [[ $delete_dayfile = false ]]
537	then
538	remote_dayfile=${local_host}_${job_name}_result_$kennung
539	local_dayfile=${remote_host}_${job_name}
540	else
541	remote_dayfile=/dev/null
542	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
543	then
544	notification='# @ notification = never'
545	fi
546	fi
547
548
549
550	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
551	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
552	then
553
554	if [[ $remote_host = ibmy ]]
555	then
556	consumable_memory=""
557	else
558	consumable_memory="ConsumableMemory($memory mb)"
559	fi
560
561	if [[ $remote_host = ibmh ]]
562	then
563	data_limit=""
564	network_to_use=""
565	class=""
566	environment=""
567	else
568	class="# @ class = $queue"
569	environment="# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes"
570	if [[ $queue = cdev ]]
571	then
572	data_limit="# @ data_limit = 1.76gb"
573	network_to_use="# @ network.mpi = sn_all,shared,ip"
574	else
575	if [[ $remote_host = ibms ]]
576	then
577	network_to_use="# @ network.mpi = csss,shared,us"
578	elif [[ $remote_host = ibmy ]]
579	then
580	network_to_use=""
581	else
582	network_to_use="# @ network.mpi = sn_all,shared,us"
583	data_limit="# @ data_limit = 1.76gb"
584	fi
585	fi
586	fi
587
588	cat > $job_to_send << %%END%%
589	#!/bin/ksh
590	# @ shell = /bin/ksh
591
592	# @ job_type = parallel
593	# @ job_name = palm
594	# @ wall_clock_limit = ${timestring},$timestring
595	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
596	# @ output = $remote_dayfile
597	# @ error = $remote_dayfile
598	# @ image_size = 50
599	$class
600	$environment
601	$network_to_use
602	$data_limit
603	$notification
604
605	%%END%%
606
607	if (( nodes > 0 ))
608	then
609
610	cat >> $job_to_send << %%END%%
611	# @ node = $nodes
612	# @ tasks_per_node = $tasks_per_node
613	# @ node_usage = $node_usage
614	# @ queue
615
616	%%END%%
617
618	else
619
620	if [[ $remote_host != ibmy ]]
621	then
622
623	cat >> $job_to_send << %%END%%
624	# @ blocking = unlimited
625	# @ total_tasks = $numprocs
626	# @ node_usage = $node_usage
627	# @ queue
628
629	%%END%%
630
631	else
632
633	cat >> $job_to_send << %%END%%
634	# @ node = 1
635	# @ total_tasks = $numprocs
636	# @ queue
637
638	%%END%%
639
640	fi
641
642	fi
643
644	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
645	then
646
647	cat > $job_to_send << %%END%%
648	#!/bin/ksh
649
650	# @ job_type = serial
651	# @ node_usage = $node_usage
652	# @ job_name = palm
653	# @ wall_clock_limit = ${timestring},$timestring
654	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
655	# @ output = $remote_dayfile
656	# @ error = $remote_dayfile
657	$class
658	$notification
659
660	# @ queue
661
662	%%END%%
663
664	elif [[ $remote_host = lcfimm ]]
665	then
666
667	if [[ $numprocs != 0 ]]
668	then
669	cat > $job_to_send << %%END%%
670	#!/bin/ksh
671	#PBS -N $job_name
672	#PBS -A geofysisk
673	#PBS -l walltime=$timestring
674	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
675	#PBS -l pmem=${memory}mb
676	#PBS -m abe
677	#PBS -M bjorn.maronga@student.uib.no
678	#PBS -o $remote_dayfile
679	#PBS -j oe
680	mpd &
681
682	%%END%%
683
684	else
685	cat > $job_to_send << %%END%%
686	#!/bin/ksh
687	#PBS -N $job_name
688	#PBS -A geofysisk
689	#PBS -l walltime=$timestring
690	#PBS -l ncpus=1
691	#PBS -l pmem=${memory}mb
692	#PBS -m abe
693	#PBS -M bjorn.maronga@student.uib.no
694	#PBS -o $remote_dayfile
695	#PBS -j oe
696
697	%%END%%
698
699	fi
700
701	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
702	then
703
704	if [[ $queue = testq ]]
705	then
706	queue_directive="#PBS -q $queue"
707	else
708	queue_directive=""
709	fi
710
711	if [[ $numprocs != 0 ]]
712	then
713	cat > $job_to_send << %%END%%
714	#!/bin/bash
715	#PBS -N $job_name
716	#PBS -l walltime=$timestring
717	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
718	#PBS -l feature=$sgi_feature
719	#PBS -l naccesspolicy=$node_usage
720	#PBS -o $remote_dayfile
721	#PBS -j oe
722	$queue_directive
723
724	. /usr/share/modules/init/bash
725	module load $mpilib
726	# module load mvapich2/1.2rc1-intel
727	# module load mvapich2
728	module load netcdf
729	export LD_LIBRARY_PATH=/sw/intel/cce/10.1.015/lib:/sw/intel/fce/10.1.015/lib:/sw/dataformats/netcdf/3.6.2/lib:\$LD_LIBRARY_PATH
730	echo ld_library_path=\$LD_LIBRARY_PATH
731
732	%%END%%
733
734	else
735	cat > $job_to_send << %%END%%
736	#PBS -S /bin/bash
737	#PBS -N $job_name
738	#PBS -l walltime=$timestring
739	#PBS -l ncpus=1
740	#PBS -o $remote_dayfile
741	#PBS -e $remote_dayfile
742
743	%%END%%
744
745	fi
746
747	elif [[ $remote_host = lcxt4 ]]
748	then
749
750	if [[ $numprocs != 0 ]]
751	then
752	cat > $job_to_send << %%END%%
753	#!/bin/ksh
754	#PBS -S /bin/ksh
755	#PBS -N $job_name
756	#PBS -A geofysisk
757	#PBS -j oe
758	#PBS -l walltime=$timestring
759	#PBS -l mppwidth=${numprocs}
760	#PBS -l mppnppn=${tasks_per_node}
761	#PBS -m abe
762	#PBS -M bjorn.maronga@student.uib.no
763	#PBS -o $remote_dayfile
764
765	%%END%%
766
767	else
768	cat > $job_to_send << %%END%%
769	#!/bin/ksh
770	#PBS -S /bin/ksh
771	#PBS -N $job_name
772	#PBS -A geofysisk
773	#PBS -j oe
774	#PBS -l walltime=$timestring
775	#PBS -l ncpus=1
776	#PBS -l pmem=${memory}mb
777	#PBS -m abe
778	#PBS -M bjorn.maronga@student.uib.no
779	#PBS -o $remote_dayfile
780
781	%%END%%
782
783	fi
784
785	elif [[ $remote_host = nech ]]
786	then
787
788	if (( nodes > 1 ))
789	then
790	cat > $job_to_send << %%END%%
791	#!/bin/ksh
792	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
793	#PBS -l ${qsubmem}=${Memory}gb
794	#PBS -b $nodes
795	#PBS -o $remote_dayfile
796	#PBS -N palm
797	#PBS -j o
798	#PBS -T mpisx
799
800	%%END%%
801
802	elif [[ $numprocs != 0 ]]
803	then
804	cat > $job_to_send << %%END%%
805	#!/bin/ksh
806	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
807	#PBS -l ${qsubmem}=${Memory}gb
808	#PBS -o $remote_dayfile
809	#PBS -N palm
810	#PBS -j o
811
812	%%END%%
813
814	else
815	cat > $job_to_send << %%END%%
816	#!/bin/ksh
817	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
818	#PBS -o $remote_dayfile
819	#PBS -j o
820
821	%%END%%
822
823	fi
824
825	elif [[ $remote_host = necriam ]]
826	then
827
828	if (( nodes > 1 ))
829	then
830	cat > $job_to_send << %%END%%
831	#!/bin/ksh
832	#PBS -b $nodes
833	#PBS -o $remote_dayfile
834	#PBS -N $job_name
835	#PBS -j o
836	#PBS -v MPIPROGINV=YES
837
838	%%END%%
839
840	elif [[ $numprocs != 0 ]]
841	then
842	cat > $job_to_send << %%END%%
843	#!/bin/ksh
844	#PBS -q ${queue}
845	#PBS -o $remote_dayfile
846	#PBS -N $job_name
847	#PBS -j o
848	#PBS -v MPIPROGINV=YES
849
850	%%END%%
851
852	else
853	cat > $job_to_send << %%END%%
854	#!/bin/ksh
855	#PBS -o $remote_dayfile
856	#PBS -j o
857
858	%%END%%
859
860	fi
861
862	elif [[ $remote_host = lctit ]]
863	then
864	cat > $job_to_send << %%END%%
865	#!/bin/bash
866	#$ -S /bin/bash
867	cd $job_catalog
868	export PATH=$PALM_BIN:\$PATH
869	echo \$PATH
870
871	%%END%%
872
873	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
874	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
875	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
876
877	else
878
879	cat > $job_to_send << %%END%%
880	# @\$-q ${queue}
881	# @\$-l${qsubtime} $timestring
882	# @\$-l${qsubmem} ${memory}mb
883	# @\$-o $remote_dayfile
884	# @\$-eo
885
886	%%END%%
887
888	fi
889
890
891	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
892	# BEI EXIT VERANLASSEN
893	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
894	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
895	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
896	then
897	echo "set +vx" >> $job_to_send
898	echo "trap '" >> $job_to_send
899	echo "set +vx" >> $job_to_send
900	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
901	then
902	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
903	then
904	return_queue=c1
905	elif [[ $remote_host = ibms ]]
906	then
907	return_queue=p_normal
908	elif [[ $remote_host = ibmy ]]
909	then
910	return_queue=serial
911	elif [[ $remote_host = lctit ]]
912	then
913	return_queue=sla3
914	elif [[ $remote_host = necriam ]]
915	then
916	return_queue=SP
917	else
918	return_queue=unknown
919	fi
920
921	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
922	then
923
924	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
925	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
926	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
927	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
928	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
929	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
930	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
931	if [[ $host != "ibmh" ]]
932	then
933	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
934	fi
935	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
936	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
937
938	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
939	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
940
941	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
942	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
943	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
944
945	elif [[ $remote_host = nech ]]
946	then
947	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
948	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
949	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
950	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
951	echo "#PBS -j o" >> $job_to_send
952	echo " " >> $job_to_send
953	echo "set -x" >> $job_to_send
954	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
955	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
956	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
957	echo "%%END%%" >> $job_to_send
958
959	elif [[ $remote_host = necriam ]]
960	then
961	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
962	echo "#PBS -q $return_queue" >> $job_to_send
963	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
964	echo "#PBS -j o" >> $job_to_send
965	echo " " >> $job_to_send
966	echo "set -x" >> $job_to_send
967	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
968	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
969	echo "%%END%%" >> $job_to_send
970
971	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
972	then
973	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
974	echo "#!/bin/bash" >> $job_to_send
975	echo "#PBS -N job_protocol_transfer" >> $job_to_send
976	echo "#PBS -l walltime=00:02:00" >> $job_to_send
977	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
978	echo "#PBS -l feature=xe" >> $job_to_send
979	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
980	echo "#PBS -j oe" >> $job_to_send
981	echo " " >> $job_to_send
982	echo ". /usr/share/modules/init/bash" >> $job_to_send
983	echo "set -x" >> $job_to_send
984	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
985	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
986	echo "%%END%%" >> $job_to_send
987
988	elif [[ $remote_host = lctit ]]
989	then
990	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
991	echo "set -x" >> $job_to_send
992	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
993	echo "cd $job_catalog" >> $job_to_send
994	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
995	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
996	echo "%%END%%" >> $job_to_send
997
998	else
999
1000	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
1001	echo "# @\\\$-q $return_queue" >> $job_to_send
1002	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
1003	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
1004	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
1005	then
1006	echo "# @\$-l mpp_p=0" >> $job_to_send
1007	fi
1008	echo '# @\$-lF 10mb' >> $job_to_send
1009	# echo '# @\$-o /dev/null' >> $job_to_send
1010	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
1011	echo '# @\\\$-eo' >> $job_to_send
1012	echo " " >> $job_to_send
1013	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
1014	then
1015	echo "set +vx" >> $job_to_send
1016	echo ". .profile" >> $job_to_send
1017	fi
1018	echo "set -x" >> $job_to_send
1019	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
1020	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
1021	echo "%%END%%" >> $job_to_send
1022	fi
1023
1024	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
1025	then
1026	echo "llsubmit scpjob.$kennung" >> $job_to_send
1027	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
1028	then
1029	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1030	echo "msub scpjob.$kennung" >> $job_to_send
1031	elif [[ $remote_host = lctit ]]
1032	then
1033	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1034	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
1035	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
1036	echo "sleep 10" >> $job_to_send
1037	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
1038	then
1039	echo "qsub -J n scpjob.$kennung" >> $job_to_send
1040	elif [[ $remote_host = t3es ]]
1041	then
1042	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
1043	else
1044	echo "qsub scpjob.$kennung" >> $job_to_send
1045	fi
1046	echo "rm scpjob.$kennung" >> $job_to_send
1047	if [[ $remote_host = nech ]]
1048	then
1049	echo "cd -" >> $job_to_send
1050	fi
1051	else
1052	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
1053	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
1054	fi
1055	echo "set -x" >> $job_to_send
1056	echo " ' exit" >> $job_to_send
1057	echo "set -x" >> $job_to_send
1058	fi
1059
1060
1061
1062	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
1063	cat $file_to_send >> $job_to_send
1064
1065	if [[ $remote_host = ibm ]]
1066	then
1067	echo " " >> $job_to_send
1068	echo "exit" >> $job_to_send
1069	fi
1070	if [[ $remote_host = lctit ]]
1071	then
1072	echo " " >> $job_to_send
1073	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
1074	fi
1075
1076
1077
1078	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
1079	if [[ -z $remote_user ]]
1080	then
1081	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
1082	then
1083	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
1084	fi
1085	fi
1086
1087
1088
1089	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
1090	if [[ $no_submit = false ]]
1091	then
1092	if [[ $remote_host != $local_host ]]
1093	then
1094	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
1095	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
1096	then
1097	job_catalog_save=$job_catalog
1098	job_catalog=job_queue
1099	elif [[ $remote_host = nech ]]
1100	then
1101	job_catalog_save=$job_catalog
1102	job_catalog=/hpf/b/${remote_user}/job_queue
1103	fi
1104	if [[ $local_host = decalpha ]]
1105	then
1106	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
1107	# PASSWORT AB
1108	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1109	elif [[ $remote_host = nech ]]
1110	then
1111	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
1112	# TRANSFERIERT WERDEN
1113	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
1114	else
1115	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1116	fi
1117	if [[ $? = 1 ]]
1118	then
1119	locat=scp; exit
1120	fi
1121	if [[ $remote_host = ibms ]]
1122	then
1123	job_catalog=$job_catalog_save
1124	fi
1125	[[ $verify = true ]] && printf "\n >>> finished\n"
1126	else
1127	eval job_catalog=$job_catalog
1128	cp $job_to_send ${job_catalog}/$job_on_remhost
1129	fi
1130
1131
1132
1133	# NQS- BZW. LOADLEVELER-JOB STARTEN
1134	if [[ $remote_host != $local_host ]]
1135	then
1136	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
1137	if [[ $remote_host != lctit ]]
1138	then
1139	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
1140	else
1141	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1142	# MIT SSH, DESHALB AUFRUF PER PIPE
1143	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
1144	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1145	echo "first try" > send_protocol
1146	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
1147	do
1148	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
1149	then
1150	printf "\n trying to submit job to TIT cluster..."
1151	else
1152	printf "\n +++ failed ... trying to submit again ..."
1153	fi
1154	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
1155	cat send_protocol
1156	done
1157	sleep 10
1158	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1159	echo "$submcom $job_on_remhost"
1160	rm send_protocol
1161	fi
1162
1163	[[ $verify = true ]] && printf " >>> o.k.\n"
1164	else
1165	cd $job_catalog
1166	if [[ $(echo $local_host \| cut -c1-5) = lcsgi \|\| $(echo $local_host \| cut -c1-3) = ibm ]]
1167	then
1168	eval $submcom $job_on_remhost
1169	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 ]]
1170	then
1171	eval $submcom $job_on_remhost
1172	echo "$submcom $job_on_remhost"
1173	chmod u+x $job_on_remhost
1174	elif [[ $(echo $local_host \| cut -c1-5) = lcsgi ]]
1175	then
1176	eval $submcom $job_on_remhost
1177	elif [[ $local_host = nech ]]
1178	then
1179	if [[ $queue = default ]]
1180	then
1181	eval $submcom $job_on_remhost
1182	else
1183	eval $submcom -q $queue $job_on_remhost
1184	fi
1185	else
1186	qsub $job_on_remhost
1187	fi
1188	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
1189	[[ $local_host != lctit ]] && rm $job_on_remhost
1190	cd - > /dev/null
1191	fi
1192	fi
1193
1194
1195
1196	# ABSCHLUSSARBEITEN
1197
1198	if [[ $no_submit = false ]]
1199	then
1200	rm $job_to_send
1201	fi
1202	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |