Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild_new @ 21

Last change on this file since 21 was 9, checked in by raasch, 18 years ago
test printing removed from mbuild
File size: 47.0 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 10/02/07
3
4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6	# Rechner
7
8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9	# verwendet wird:
10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11	# nach aussen weitergegeben. "while read line" funktioniert nicht
12	# innerhalb einer Pipe.
13
14	# letzte Aenderung:
15	# 06/05/02 - Siggi - Beginn der Entwicklung
16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
20	# benutzt wird
21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22	# 19/12/02 - Siggi - ibmb validiert
23	# 05/02/03 - Siggi - hostname nobela included
24	# 04/03/03 - Siggi - host nech included
25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
26	# file LAST_MAKE_CALL (otherwise error on NEC, because
27	# '' are part of compiler options
28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
29	# string, in case that palm.f90 version contains
30	# such strings
31	# 16/04/03 - Siggi - First extensions for linux machines
32	# 24/06/03 - Siggi - host orkan included
33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34	# 24/07/03 - Siggi - host maestro admitted
35	# 06/08/03 - Siggi - host gregale admitted
36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
39	# (-D$OMP=OMP) in order to avoid problems with
40	# OMP_NUM_THREADS
41	# 09/01/04 - Siggi - action above cancelled
42	# 28/01/04 - Siggi - action above re-cancelled
43	# 08/03/04 - Siggi - host scirocco admitted
44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45	# the respective .f90 file is not listed in the makefile
46	# and deletion is demanded by the user
47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48	# due to error in ssh installation (otherwise a prompt
49	# for the password appears)
50	# 23/07/04 - Siggi - changes due to the new berni configuration
51	# (federation switch)
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
56	# 24/04/05 - Siggi - netcdf support on lcmuk
57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58	# 12/05/05 - Siggi - netcdf support on ibm
59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
60	# 18/05/05 - Siggi - netcdf support on nec
61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62	# 23/05/05 - Siggi - netcdf support on ibms
63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64	# 30/06/05 - Siggi - netcdf support on bora
65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68	# host gfdl5 (ibmy) admitted
69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70	# 20/01/06 - Siggi - cpp directive for ibmy
71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72	# 10/02/06 - Siggi - modifications for scp on decalpha
73	# 13/04/06 - Siggi - ostria admitted
74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76	# 29/05/05 - Siggi - atmos (lcide) admitted
77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78	# 24/11/06 - Siggi - breva and levanto admitted
79	# 07/02/07 - Siggi - adapted for RIAM (neck)
80	# 10/02/07 - Siggi - all hpmuk-related code removed
81
82
83
84	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
85	config_file=.mrun.config
86	host=all
87	host_found=false
88	ibm_hb_done=false
89	lcmuk_done=false
90	locat=normal
91	makefile=""
92	remote_mode=interactive
93	scirocco=false
94	silent=false
95	suf=f90
96	update=false
97
98	typeset -i ih ihost=0
99
100	typeset -R50 calltime
101	typeset -L20 column1
102	typeset -L50 column2
103	typeset -L70 column3
104	typeset -L20 version="MBUILD 1.0"
105
106	# FEHLERBEHANDLUNG
107	# BEI EXIT:
108	trap 'if [[ $locat != normal ]]
109	then
110	printf "\n\n +++ mbuild killed \n\n"
111	else
112	printf "\n\n *** mbuild finished \n\n"
113	fi' exit
114
115
116	# BEI TERMINAL-BREAK:
117	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
118	exit
119	' 2
120
121
122
123	# SHELLSCRIPT-OPTIONEN EINLESEN
124	while getopts :c:h:m:rs: option
125	do
126	case $option in
127	(c) config_file=$OPTARG;;
128	(h) host=$OPTARG;;
129	(m) makefile=$OPTARG;;
130	(r) remote_mode=batch;;
131	(s) suf=$OPTARG;;
132	(\?) printf "\n +++ unknown option $OPTARG \n";
133	locat=parameter; exit;;
134	esac
135	done
136
137
138
139	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
140	if [[ $remote_mode = batch ]]
141	then
142	printf "\n +++ sorry, batch mode does not work! \n"
143	locat=parameter; exit
144	fi
145
146
147
148	# LOKALEN RECHNER ERMITTELN
149	local_host_real_name=$(hostname)
150	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
151	case $local_host_real_name in
152	(atmos) local_host=lcide;;
153	(berte) local_host=t3eb;;
154	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
155	(gate) local_host=neck;;
156	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
157	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
158	(gwdk081.gwdg.de) local_host=ibm;;
159	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
160	(nobel\|nobela) local_host=ibms;;
161	(tgg*) local_host=lctit;;
162	(t3e) local_host=t3eh;;
163	(zam003) local_host=t3ej2;;
164	(zam005) local_host=t3ej5;;
165	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
166	locat=local_host; exit;;
167	esac
168
169	[[ $local_host_real_name = scirocco ]] && scirocco=true
170
171
172
173	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
174	if [[ ! -f $config_file ]]
175	then
176	printf "\n +++ configuration file: "
177	printf "\n $config_file"
178	printf "\n does not exist"
179	locat=configuration; exit
180	fi
181	if [[ $local_host != ibms ]]
182	then
183	config_file=$PWD/$config_file
184	else
185	config_file=`pwd`/$config_file
186	fi
187
188
189
190	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
191	line=""
192	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
193	do
194	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
195	then
196	local_username=`echo $line \| cut -d" " -s -f2`
197	fi
198	done
199
200	if [[ "$local_username" = "" ]]
201	then
202	printf "\n +++ no user name found in configuration file"
203	printf "\n for local host \"$local_host\" "
204	locat=config_file; exit
205	fi
206
207
208	# LOKALEN QUELLTEXTPFAD ERMITTELN.
209	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
210	# VEREINBART WURDE.
211	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
212	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
213	line=""
214	grep "%" $config_file \| while read line
215	do
216	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
217	then
218	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
219	value=`echo $line \| cut -d" " -s -f2`
220	eval export $var=\$value
221	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
222	fi
223	done
224
225	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
226	line=""
227	grep "%source_path" $config_file \| while read line
228	do
229	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
230	then
231	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
232	then
233	global_source_path=`echo $line \| cut -d" " -s -f2`
234	fi
235	fi
236	done
237
238	line=""
239	grep " $local_host" $config_file \| grep "%source_path" \| while read line
240	do
241	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
242	then
243	local_source_path=`echo $line \| cut -d" " -s -f2`
244	fi
245	done
246
247	if [[ "$local_source_path" = "" ]]
248	then
249	if [[ "$global_source_path" != "" ]]
250	then
251	local_source_path=$global_source_path
252	else
253	printf "\n +++ no source path found in configuration file"
254	printf "\n for local host \"$local_host\" "
255	printf "\n please set \"\%source_path\" in configuration file"
256	locat=config_file; exit
257	fi
258	fi
259	eval local_source_path=$local_source_path
260	eval local_source_path=$local_source_path
261
262
263	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
264	line=""
265	grep "%depository_path" $config_file \| while read line
266	do
267	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
268	then
269	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
270	then
271	global_depository_path=`echo $line \| cut -d" " -s -f2`
272	fi
273	fi
274	done
275
276	line=""
277	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
278	do
279	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
280	then
281	local_depository_path=`echo $line \| cut -d" " -s -f2`
282	fi
283	done
284
285	if [[ "$local_depository_path" = "" ]]
286	then
287	if [[ "$global_depository_path" != "" ]]
288	then
289	local_depository_path=$global_depository_path
290	else
291	printf "\n +++ no depository path found in configuration file"
292	printf "\n for local host \"$local_host\" "
293	printf "\n please set \"\%depository_path\" in configuration file"
294	locat=config_file; exit
295	fi
296	fi
297	eval local_depository_path=$local_depository_path
298	eval local_depository_path=$local_depository_path
299
300
301
302	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
303	# VEREINBART WURDE
304	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
305	then
306	printf "\n +++ no main program or more than one main program defined"
307	printf "\n in configuration file"
308	locat=configuration; exit
309	else
310	line=`grep "%mainprog" $config_file`
311	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
312	then
313	printf "\n +++ no main program defined in configuration file"
314	locat=configuration; exit
315	fi
316	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
317	fi
318
319
320
321	# MAKEFILE vorhanden
322	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
323	if [[ ! -f $makefile ]]
324	then
325	printf "\n +++ makefile: "
326	printf "\n $makefile"
327	printf "\n does not exist"
328	locat=makefile; exit
329	fi
330
331
332	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
333	calltime=$(date)
334	printf "\n"
335	printf "#------------------------------------------------------------------------# \n"
336	printf "\| $version$calltime \| \n"
337	printf "\| \| \n"
338	column1="called on:"; column2=$local_host_real_name
339	printf "\| $column1$column2 \| \n"
340	column1="local username:"; column2=$local_username
341	printf "\| $column1$column2 \| \n"
342	column1="local IP-addres:"; column2=$local_addres
343	printf "\| $column1$column2 \| \n"
344	column1="config file:"; column2=$config_file
345	printf "\| $column1$column2 \| \n"
346	column1="makefile:"; column2=$makefile
347	printf "\| $column1$column2 \| \n"
348	column1="local source path:"; column2=$local_source_path
349	printf "\| $column1$column2 \| \n"
350	column1="make depository:"; column2=$local_depository_path
351	printf "\| $column1$column2 \| \n"
352	printf "#------------------------------------------------------------------------# \n"
353
354	# printf "\| \| \n"
355
356
357	cd $local_source_path
358
359
360	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
361	source_code_files=`ls -1 *.$suf`
362
363
364
365	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
366	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
367	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
368	if [[ ! -d $local_depository_path ]]
369	then
370	if mkdir $local_depository_path
371	then
372	printf "\n\n *** directory for make depository:"
373	printf "\n $local_depository_path"
374	printf "\n was created\n"
375
376	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
377	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
378	printf "\n *** makefile and source code files are copied to"
379	printf "\n $local_depository_path\n"
380	printf "\n copying makefile \"$makefile\" ..."
381	cp -p $makefile $local_depository_path/Makefile
382
383	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
384	# SEIN
385	for filename in $source_code_files
386	do
387	if [[ $(grep -c $filename $makefile) = 0 ]]
388	then
389	printf "\n +++ source code file:"
390	printf "\n $filename"
391	printf "\n is not listed in makefile"
392	locat=makefile; exit
393	else
394	printf "\n copying source code file \"$filename\" ..."
395	cp -p $filename $local_depository_path
396	fi
397	done
398	printf "\n"
399	else
400	printf "\n +++ directory for make depository:"
401	printf "\n $local_depository_path"
402	printf "\n cannot be created"
403	locat=local_depository_path; exit
404	fi
405	else
406
407	printf "\n *** checking file status ..."
408
409	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
410	if [[ $makefile -nt $local_depository_path/Makefile ]]
411	then
412	printf "\n *** update of \"$makefile\" "
413	cp -f -p $makefile $local_depository_path/Makefile
414	update=true
415
416	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
417	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
418	cd $local_depository_path
419	source_code_files_in_depository=`ls -1 *.$suf`
420	for filename in $source_code_files_in_depository
421	do
422	if [[ $(grep -c $filename Makefile) = 0 ]]
423	then
424	printf "\n *** source code file in \"$local_depository_path\":"
425	printf "\n $filename"
426	printf "\n is not listed in makefile"
427	if [[ $silent = false ]]
428	then
429	answer=dummy
430	printf "\n\n"
431	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
432	do
433	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
434	read answer
435	done
436	if [[ $answer = y \|\| $answer = Y ]]
437	then
438	base=`echo $filename \| cut -d. -f2`
439	rm -f $filename
440	rm -f ${base}.o ${base}.mod
441	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
442	else
443	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
444	fi
445	fi
446	fi
447	done
448	cd - > /dev/null 2>&1
449
450	elif [[ $local_depository_path/Makefile -nt $makefile ]]
451	then
452	printf "\n *** makefile in depository is newer than"
453	printf "\n \"$makefile\" "
454	if [[ $silent = false ]]
455	then
456	answer=dummy
457	printf "\n\n"
458	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
459	do
460	printf " >>> update \"$makefile\" (y/n) ? "
461	read answer
462	done
463	if [[ $answer = y \|\| $answer = Y ]]
464	then
465	cp -f -p $local_depository_path/Makefile $makefile
466	printf "\n *** \"$makefile\" updated"
467	else
468	printf "\n *** \"$makefile\" not updated"
469	fi
470	fi
471	fi
472
473	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
474	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
475	for filename in $source_code_files
476	do
477	if [[ $(grep -c $filename $makefile) = 0 ]]
478	then
479	printf "\n +++ source code file:"
480	printf "\n $filename"
481	printf "\n is not listed in makefile"
482	locat=makefile; exit
483	else
484	if [[ ! -f $local_depository_path/$filename ]]
485	then
486	cp -p $filename $local_depository_path
487	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
488	fi
489	if [[ $filename -nt $local_depository_path/$filename ]]
490	then
491	printf "\n *** update of source code file \"$filename\" "
492	cp -f -p $filename $local_depository_path
493	update=true
494	fi
495	fi
496	done
497
498
499	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
500	# ODER EVTL. NEUEREN DATUMS SIND
501	cd $local_depository_path
502	source_code_files_in_depository=`ls -1 *.$suf`
503	cd - > /dev/null 2>&1
504	for filename in $source_code_files_in_depository
505	do
506	if [[ ! -f $filename ]]
507	then
508	printf "\n *** source code file \"$filename\" does not exist in current directory"
509	if [[ $silent = false ]]
510	then
511	answer=dummy
512	printf "\n\n"
513	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
514	do
515	printf " >>> create \"$filename\" in current directory (y/n) ? "
516	read answer
517	done
518	if [[ $answer = y \|\| $answer = Y ]]
519	then
520	cp -p $local_depository_path/$filename $filename
521	printf "\n *** source code file \"$filename\" created in current directory"
522	else
523	printf "\n *** source code file \"$filename\" not created in current directory"
524	fi
525	fi
526	elif [[ $local_depository_path/$filename -nt $filename ]]
527	then
528	ls -al $local_depository_path/$filename
529	ls -al $filename
530	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
531	if [[ $silent = false ]]
532	then
533	answer=dummy
534	printf "\n\n"
535	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
536	do
537	printf " >>> update \"$filename\" in current directory (y/n) ? "
538	read answer
539	done
540	if [[ $answer = y \|\| $answer = Y ]]
541	then
542	cp -f -p $local_depository_path/$filename $filename
543	printf "\n *** source code file \"$filename\" updated in current directory"
544	else
545	printf "\n *** source code file \"$filename\" not updated in current directory"
546	fi
547	fi
548	fi
549	done
550
551	if [[ $update = false ]]
552	then
553	printf "\n *** no updates necessary in \"$local_depository_path\" "
554	if [[ $silent = false ]]
555	then
556	answer=dummy
557	printf "\n\n"
558	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
559	do
560	printf " >>> continue with updates on remote hosts (y/n) ? "
561	read answer
562	done
563	if [[ $answer = n \|\| $answer = N ]]
564	then
565	locat=user_abort; exit
566	fi
567	fi
568	fi
569	fi
570
571
572
573	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
574	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
575	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
576	printf "\n\n *** tar of makefile and source files in depository ..."
577	cd $local_depository_path
578	chmod u+w Makefile *.$suf
579	tar -cf ${mainprog}_sources.tar Makefile *.$suf
580	printf "\n"
581
582
583
584	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
585	if [[ $host = all ]]
586	then
587	printf "\n *** updates will be made for ALL hosts found in"
588	printf "\n the configuration file"
589	else
590	printf "\n *** update will be made for host \"$host\" "
591	fi
592
593	if [[ $silent = false ]]
594	then
595	answer=dummy
596	printf "\n\n"
597	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
598	do
599	printf " >>> continue (y/n) ? "
600	read answer
601	done
602	if [[ $answer = n \|\| $answer = N ]]
603	then
604	locat=user_abort; exit
605	fi
606	fi
607
608
609
610
611	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
612	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
613	printf "\n *** scanning configuration file for host(s) ..."
614
615	grep %fopts $config_file \| while read line
616	do
617	# KOMMENTARZEILEN UEBERSPRINGEN
618	[[ $(echo $line \| cut -c1) = "#" ]] && continue
619	(( ihost = ihost + 1 ))
620	hostline[$ihost]="$line"
621	done
622
623
624	while (( ih < ihost ))
625	do
626
627	(( ih = ih + 1 ))
628
629	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
630	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
631	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
632	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
633	remote_host=`echo $remote_host_string \| cut -d" " -f1`
634	if [[ $host != all ]]
635	then
636	[[ $remote_host != $host ]] && continue
637	fi
638	host_found=true
639	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
640	if [[ $condition1 = $remote_host ]]
641	then
642	condition1=""
643	else
644	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
645	fi
646
647
648	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
649	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
650	then
651	if [[ $ibm_hb_done = true ]]
652	then
653	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
654	printf "\n been carried out on one of the HLRN machines\n"
655	continue
656	fi
657	fi
658
659	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
660	if [[ $remote_host = lcmuk ]]
661	then
662	if [[ $lcmuk_done = true ]]
663	then
664	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
665	printf "\n been carried out on this host\n"
666	continue
667	fi
668	fi
669
670
671	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
672	netcdf_support=false
673	case $remote_host in
674	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
675	netcdf_support=true
676	if [[ $scirocco = true ]]
677	then
678	netcdf_path=/opt/netcdf/3.6.2-beta4
679	else
680	netcdf_path=/muksoft/packages/netcdf/linux
681	fi;;
682	(lctit) remote_addres=172.17.75.161; netcdf_support=true
683	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
684	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
685	netcdf_path=/usr/local/netcdf-3.5.1;;
686	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
687	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
688	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
689	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
690	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
691	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
692	netcdf_path=/applic/lib/NETCDF64;;
693	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
694	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
695	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
696	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
697	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
698	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
699	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
700	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
701	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
702	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
703	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
704	(*) printf "\n +++ remote host \"$remote_host\" unknown";
705	printf "\n please inform S. Raasch!";
706	locat=config_file; exit;;
707	esac
708
709
710	# REMOTE-USERNAMEN ERMITTELN
711	line=""
712	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
713	do
714	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
715	then
716	line="$line1"
717	fi
718	done
719
720	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
721	then
722	printf "\n +++ no remote username found in configuration file"
723	printf "\n for \"$remote_host_string\" "
724	locat=config_file; exit
725	else
726	remote_username=`echo $line \| cut -d" " -s -f2`
727	fi
728
729
730	# REMOTE-QUELLTEXTPFAD ERMITTELN
731	line=""
732	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
733	do
734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
735	then
736	line="$line1"
737	fi
738	done
739
740	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
741	then
742	remote_source_path=`echo $line \| cut -d" " -s -f2`
743	fi
744	if [[ "$remote_source_path" = "" ]]
745	then
746	if [[ "$global_source_path" != "" ]]
747	then
748	remote_source_path=$global_source_path
749	else
750	printf "\n +++ no source path found in configuration file"
751	printf "\n for \"$remote_host_string\" "
752	locat=config_file; exit
753	fi
754	fi
755
756
757	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
758	line=""
759	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
760	do
761	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
762	then
763	line="$line1"
764	fi
765	done
766
767	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
768	then
769	remote_md=`echo $line \| cut -d" " -s -f2`
770	fi
771	if [[ "$remote_md" = "" ]]
772	then
773	if [[ "$global_depository_path" != "" ]]
774	then
775	remote_md=$global_depository_path
776	else
777	printf "\n +++ no depository path found in configuration file"
778	printf "\n for \"$remote_host_string\" "
779	printf "\n please set \"\%depository_path\" in configuration file"
780	locat=config_file; exit
781	fi
782	fi
783
784	remote_md=$(eval echo $remote_md)
785
786
787	# COMPILERNAMEN ERMITTELN
788	line=""
789	grep "$remote_host_string" $config_file \| grep "%compiler_name" \| while read line1
790	do
791	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
792	then
793	line="$line1"
794	fi
795	done
796
797	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
798	then
799	printf "\n +++ no compiler name found in configuration file"
800	printf "\n for \"$remote_host_string\" "
801	locat=config_file; exit
802	else
803	compiler_name=`echo $line \| cut -d" " -s -f2`
804	fi
805
806
807
808	# PRAEPROZESSOR-DIREKTIVEN SETZEN
809	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
810	then
811	if [[ $remote_host = ibms ]]
812	then
813	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
814	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
815	else
816	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
817	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
818	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
819	fi
820	elif [[ $remote_host = lcmuk ]]
821	then
822	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
823	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
824	elif [[ $remote_host = lctit ]]
825	then
826	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
827	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
828	elif [[ $remote_host = decalpha ]]
829	then
830	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
831	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
832	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
833	then
834	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
835	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
836	fi
837
838	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
839	then
840	for string in $remote_host_string
841	do
842	if [[ $(echo $string \| cut -c1-3) = ibm ]]
843	then
844	cpp_options="${cpp_options},-D__ibm"
845	if [[ $remote_host = ibmy ]]
846	then
847	cpp_options="${cpp_options},-D__ibmy_special"
848	fi
849	else
850	cpp_options="${cpp_options},-D__$string"
851	fi
852	done
853	cpp_options="$cpp_options "
854	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
855	then
856	for string in $remote_host_string
857	do
858	if [[ $(echo $string \| cut -c1-3) = nec ]]
859	then
860	cpp_options="${cpp_options} -D__nec"
861	else
862	cpp_options="${cpp_options} -D__$string"
863	fi
864	done
865	cpp_options="$cpp_options "
866	else
867	for string in $remote_host_string
868	do
869	cpp_options="$cpp_options -D__$string "
870	done
871	fi
872
873
874	# COMPILEROPTIONEN ERMITTELN
875	line=""
876	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
877	do
878	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
879	then
880	line="$line1"
881	fi
882	done
883	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
884	then
885	printf "\n +++ no compiler options found in configuration file"
886	printf "\n for \"$remote_host_string\" "
887	locat=config_file; exit
888	else
889	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
890	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
891	fi
892	if [[ $netcdf_support = true ]]
893	then
894	case $remote_host in
895	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
896	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
897	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
898	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
899	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
900	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
901	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
902	esac
903	fi
904
905
906
907	# LADER-OPTIONEN ERMITTELN
908	line=""
909	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
910	do
911	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
912	then
913	line="$line1"
914	fi
915	done
916
917	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
918	then
919	printf "\n +++ no loader options found in configuration file"
920	printf "\n for \"$remote_host_string\" "
921	locat=config_file; exit
922	else
923	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
924	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
925	fi
926	if [[ $netcdf_support = true ]]
927	then
928	case $remote_host in
929	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
930	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
931	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
932	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
933	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
934	esac
935	fi
936
937
938	printf "\n\n#------------------------------------------------------------------------# \n"
939	if [[ $remote_host = $local_host ]]
940	then
941	column1="remote_host:"; column2="$remote_host (= local host!)"
942	else
943	column1="remote_host:"; column2=$remote_host
944	fi
945	printf "\| $column1$column2 \| \n"
946	printf "\| \| \n"
947	column1="conditions:"; column2="$condition1 $condition2"
948	printf "\| $column1$column2 \| \n"
949	column1="make depository:"; column2=$remote_md
950	printf "\| $column1$column2 \| \n"
951	column1="username:"; column2=$remote_username
952	printf "\| $column1$column2 \| \n"
953	column1="addres:"; column2=$remote_addres
954	printf "\| $column1$column2 \| \n"
955	column1="compiler:"; column2=$compiler_name
956	printf "\| $column1$column2 \| \n"
957	column1="cpp options:"; column2=$cpp_options
958	printf "\| $column1$column2 \| \n"
959	line=$(echo "$cpp_options" \| cut -c51-)
960	while [[ "$line" != "" ]]
961	do
962	column1=""
963	column2=$line
964	printf "\| $column1$column2 \| \n"
965	line=$(echo "$line" \| cut -c51-)
966	done
967	column1="compiler options:"; column2=$compiler_options
968	printf "\| $column1$column2 \| \n"
969	line=$(echo "$compiler_options" \| cut -c51-)
970	while [[ "$line" != "" ]]
971	do
972	column1=""
973	column2=$line
974	printf "\| $column1$column2 \| \n"
975	line=$(echo "$line" \| cut -c51-)
976	done
977	column1="loader options:"; column2=$loader_options
978	printf "\| $column1$column2 \| \n"
979	line=$(echo "$loader_options" \| cut -c51-)
980	while [[ "$line" != "" ]]
981	do
982	column1=""
983	column2=$line
984	printf "\| $column1$column2 \| \n"
985	line=$(echo "$line" \| cut -c51-)
986	done
987	printf "#------------------------------------------------------------------------# \n"
988
989	if [[ $silent = false ]]
990	then
991	answer=dummy
992	printf "\n\n"
993	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
994	do
995	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
996	read answer
997	done
998	if [[ $answer = a \|\| $answer = A ]]
999	then
1000	locat=user_abort; exit
1001	fi
1002	if [[ $answer = c \|\| $answer = C ]]
1003	then
1004	silent=false
1005	fi
1006	if [[ $answer = s \|\| $answer = S ]]
1007	then
1008	continue
1009	fi
1010	fi
1011
1012
1013	if [[ $remote_mode = batch ]]
1014	then
1015
1016	# BATCH-JOB PARAMETER SETZEN
1017	case $remote_host in
1018	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1019	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1020	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1021	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1022	esac
1023
1024
1025	# BATCH-JOB ZUSAMMENSTELLEN
1026	printf "\n *** creating batch-job for remote host"
1027	echo " " > mbuild_job
1028
1029	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1030	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1031	if [[ $remote_host = t3ej2 ]]
1032	then
1033	echo "set +vx" >> mbuild_job
1034	echo ". .profile" >> mbuild_job
1035	echo "set -x" >> mbuild_job
1036	fi
1037
1038	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1039	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1040	then
1041	echo "module list" >> mbuild_job
1042	fi
1043
1044
1045	# WECHSEL IN TEMPORAERES VERZEICHNIS
1046	echo "cd ${remote_md}" >> mbuild_job
1047
1048
1049	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1050	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1051	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1052
1053
1054	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1055	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1056
1057
1058	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1059	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1060
1061
1062	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1063	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1064	echo "chmod u+w *" >> mbuild_job
1065
1066	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1067	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1068
1069
1070	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1071	echo "make clean" >> mbuild_job
1072	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1073	echo "rm *.f90 Makefile" >> mbuild_job
1074
1075
1076
1077	# JOB MITTELS SUBJOB STARTEN
1078	printf "\n *** sending batch job to remote host"
1079	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1080
1081
1082	# JOBFILE LOESCHEN
1083	# rm aljob
1084
1085	else
1086
1087	if [[ $remote_host != $local_host ]]
1088	then
1089
1090	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1091	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1092	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1093	if [[ $remote_host != lctit ]]
1094	then
1095	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1096	else
1097	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1098	# MIT SSH, DESHALB AUFRUF PER PIPE
1099	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1100	fi
1101	if [[ $local_host = decalpha ]]
1102	then
1103	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1104	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1105	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1106	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1107	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1108	else
1109	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1110	fi
1111
1112
1113
1114	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1115	echo " *** untar previous update on remote host, if existing"
1116	if [[ $remote_host != lctit ]]
1117	then
1118	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1119	else
1120	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1121	# MIT SSH, DESHALB AUFRUF PER PIPE
1122	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1123	fi
1124
1125
1126	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1127	echo " *** untar actual sources on remote host"
1128	if [[ $remote_host != lctit ]]
1129	then
1130	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1131	else
1132	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1133	# MIT SSH, DESHALB AUFRUF PER PIPE
1134	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1135	fi
1136
1137
1138	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1139	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1140	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1141	# Z.B. DIE PFADE ZUM COMPILER)
1142	echo " *** execute \"make\" on remote host"
1143
1144	if [[ $remote_host = nech ]]
1145	then
1146	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1147	else
1148	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1149	fi
1150
1151	if [[ $remote_host = t3eh ]]
1152	then
1153
1154	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1155
1156	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1157	then
1158
1159	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1160
1161	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1162	then
1163
1164	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1165
1166	elif [[ $remote_host = lctit ]]
1167	then
1168
1169	echo " " > ${remote_host}_last_make_protokoll
1170	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1171	do
1172	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1173	done
1174
1175	else
1176
1177	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1178
1179	fi
1180
1181	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1182	then
1183	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1184	if [[ $silent = false ]]
1185	then
1186	answer=dummy
1187	printf "\n"
1188	while [[ "$answer" != c && "$answer" != k ]]
1189	do
1190	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1191	read answer
1192	if [[ "$answer" = l ]]
1193	then
1194	more ${remote_host}_last_make_protokoll
1195	fi
1196	done
1197	if [[ $answer = k ]]
1198	then
1199	locat=user_abort; exit
1200	fi
1201	fi
1202	fi
1203
1204
1205
1206	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1207	printf "\n *** tar update on remote host ..."
1208	if [[ $remote_host != lctit ]]
1209	then
1210	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1211	else
1212	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1213	# MIT SSH, DESHALB AUFRUF PER PIPE
1214	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1215	fi
1216
1217
1218	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1219	# printf "\n *** \"make clean\" on remote host ..."
1220	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1221	# printf "\n"
1222
1223
1224	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1225	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1226
1227	else
1228
1229	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1230	echo " *** execute \"make\" on local host"
1231
1232	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1233
1234	if [[ $? != 0 ]]
1235	then
1236	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1237	if [[ $silent = false ]]
1238	then
1239	answer=dummy
1240	printf "\n"
1241	while [[ "$answer" != c && "$answer" != k ]]
1242	do
1243	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1244	read answer
1245	if [[ "$answer" = l ]]
1246	then
1247	more ${remote_host}_last_make_protokoll
1248	fi
1249	done
1250	if [[ $answer = k ]]
1251	then
1252	locat=user_abort; exit
1253	fi
1254	fi
1255	fi
1256
1257
1258	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1259	printf "\n *** tar update on local host ..."
1260	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1261
1262	# NUR EINMAL AUF LCMUK UEBERSETZEN
1263	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1264
1265	fi
1266
1267	fi
1268	done
1269
1270
1271	if [[ $host_found = false ]]
1272	then
1273	if [[ $host = all ]]
1274	then
1275	printf "\n +++ no hosts found in configuration file"
1276	else
1277	printf "\n +++ host \"$host\" not found in configuration file"
1278	fi
1279	locat=config_file; exit
1280	fi
1281
1282
1283
1284	# ABSCHLIESSENDE ARBEITEN
1285	rm -f hosts_found_in_config_file
1286

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |