Home

Context Navigation

mbuild_new @ 22

Last change on this file since 22 was 22, checked in by raasch, 18 years ago
compilation of utilities with mbuild, mrun_path replaced by PALM_BIN, no statistik-log
File size: 52.0 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 28/02/07
3
4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6	# Rechner
7
8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9	# verwendet wird:
10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11	# nach aussen weitergegeben. "while read line" funktioniert nicht
12	# innerhalb einer Pipe.
13
14	# letzte Aenderung:
15	# 06/05/02 - Siggi - Beginn der Entwicklung
16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
20	# benutzt wird
21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22	# 19/12/02 - Siggi - ibmb validiert
23	# 05/02/03 - Siggi - hostname nobela included
24	# 04/03/03 - Siggi - host nech included
25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
26	# file LAST_MAKE_CALL (otherwise error on NEC, because
27	# '' are part of compiler options
28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
29	# string, in case that palm.f90 version contains
30	# such strings
31	# 16/04/03 - Siggi - First extensions for linux machines
32	# 24/06/03 - Siggi - host orkan included
33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34	# 24/07/03 - Siggi - host maestro admitted
35	# 06/08/03 - Siggi - host gregale admitted
36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
39	# (-D$OMP=OMP) in order to avoid problems with
40	# OMP_NUM_THREADS
41	# 09/01/04 - Siggi - action above cancelled
42	# 28/01/04 - Siggi - action above re-cancelled
43	# 08/03/04 - Siggi - host scirocco admitted
44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45	# the respective .f90 file is not listed in the makefile
46	# and deletion is demanded by the user
47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48	# due to error in ssh installation (otherwise a prompt
49	# for the password appears)
50	# 23/07/04 - Siggi - changes due to the new berni configuration
51	# (federation switch)
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
56	# 24/04/05 - Siggi - netcdf support on lcmuk
57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58	# 12/05/05 - Siggi - netcdf support on ibm
59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
60	# 18/05/05 - Siggi - netcdf support on nec
61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62	# 23/05/05 - Siggi - netcdf support on ibms
63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64	# 30/06/05 - Siggi - netcdf support on bora
65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68	# host gfdl5 (ibmy) admitted
69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70	# 20/01/06 - Siggi - cpp directive for ibmy
71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72	# 10/02/06 - Siggi - modifications for scp on decalpha
73	# 13/04/06 - Siggi - ostria admitted
74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76	# 29/05/05 - Siggi - atmos (lcide) admitted
77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78	# 24/11/06 - Siggi - breva and levanto admitted
79	# 07/02/07 - Siggi - adapted for RIAM (neck)
80	# 10/02/07 - Siggi - all hpmuk-related code removed
81	# 28/02/07 - Siggi - compilation of utility programs added (option -u)
82
83
84
85	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
86	compile_utility_programs=false
87	config_file=.mrun.config
88	host=all
89	host_found=false
90	ibm_hb_done=false
91	lcmuk_done=false
92	locat=normal
93	makefile=""
94	remote_mode=interactive
95	scirocco=false
96	silent=false
97	suf=f90
98	update=false
99
100	typeset -i ih ihost=0
101
102	typeset -R50 calltime
103	typeset -L20 column1
104	typeset -L50 column2
105	typeset -L70 column3
106	typeset -L20 version="MBUILD 1.0"
107
108	# FEHLERBEHANDLUNG
109	# BEI EXIT:
110	trap 'if [[ $locat != normal ]]
111	then
112	printf "\n\n +++ mbuild killed \n\n"
113	else
114	printf "\n\n *** mbuild finished \n\n"
115	fi' exit
116
117
118	# BEI TERMINAL-BREAK:
119	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
120	exit
121	' 2
122
123
124
125	# SHELLSCRIPT-OPTIONEN EINLESEN
126	while getopts :c:h:m:rs:u option
127	do
128	case $option in
129	(c) config_file=$OPTARG;;
130	(h) host=$OPTARG;;
131	(m) makefile=$OPTARG;;
132	(r) remote_mode=batch;;
133	(s) suf=$OPTARG;;
134	(u) compile_utility_programs=true;;
135	(\?) printf "\n +++ unknown option $OPTARG \n";
136	locat=parameter; exit;;
137	esac
138	done
139
140
141
142	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
143	if [[ $remote_mode = batch ]]
144	then
145	printf "\n +++ sorry, batch mode does not work! \n"
146	locat=parameter; exit
147	fi
148
149
150
151	# LOKALEN RECHNER ERMITTELN
152	local_host_real_name=$(hostname)
153	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
154	case $local_host_real_name in
155	(atmos) local_host=lcide;;
156	(berte) local_host=t3eb;;
157	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
158	(gate) local_host=neck;;
159	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
160	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
161	(gwdk081.gwdg.de) local_host=ibm;;
162	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
163	(nobel\|nobela) local_host=ibms;;
164	(tgg*) local_host=lctit;;
165	(t3e) local_host=t3eh;;
166	(zam003) local_host=t3ej2;;
167	(zam005) local_host=t3ej5;;
168	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
169	locat=local_host; exit;;
170	esac
171
172	[[ $local_host_real_name = scirocco ]] && scirocco=true
173
174
175
176	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
177	if [[ ! -f $config_file ]]
178	then
179	printf "\n +++ configuration file: "
180	printf "\n $config_file"
181	printf "\n does not exist"
182	locat=configuration; exit
183	fi
184	if [[ $local_host != ibms ]]
185	then
186	config_file=$PWD/$config_file
187	else
188	config_file=`pwd`/$config_file
189	fi
190
191
192
193	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
194	line=""
195	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
196	do
197	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
198	then
199	local_username=`echo $line \| cut -d" " -s -f2`
200	fi
201	done
202
203	if [[ "$local_username" = "" ]]
204	then
205	printf "\n +++ no user name found in configuration file"
206	printf "\n for local host \"$local_host\" "
207	locat=config_file; exit
208	fi
209
210
211	# LOKALEN QUELLTEXTPFAD ERMITTELN.
212	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
213	# VEREINBART WURDE.
214	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
215	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
216	line=""
217	grep "%" $config_file \| while read line
218	do
219	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
220	then
221	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
222	value=`echo $line \| cut -d" " -s -f2`
223	eval export $var=\$value
224	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
225	fi
226	done
227
228	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
229	line=""
230	grep "%source_path" $config_file \| while read line
231	do
232	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
233	then
234	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
235	then
236	global_source_path=`echo $line \| cut -d" " -s -f2`
237	fi
238	fi
239	done
240
241	line=""
242	grep " $local_host" $config_file \| grep "%source_path" \| while read line
243	do
244	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
245	then
246	local_source_path=`echo $line \| cut -d" " -s -f2`
247	fi
248	done
249
250	if [[ "$local_source_path" = "" ]]
251	then
252	if [[ "$global_source_path" != "" ]]
253	then
254	local_source_path=$global_source_path
255	else
256	printf "\n +++ no source path found in configuration file"
257	printf "\n for local host \"$local_host\" "
258	printf "\n please set \"\%source_path\" in configuration file"
259	locat=config_file; exit
260	fi
261	fi
262	eval local_source_path=$local_source_path
263	eval local_source_path=$local_source_path
264
265
266	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
267	line=""
268	grep "%depository_path" $config_file \| while read line
269	do
270	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
271	then
272	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
273	then
274	global_depository_path=`echo $line \| cut -d" " -s -f2`
275	fi
276	fi
277	done
278
279	line=""
280	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	local_depository_path=`echo $line \| cut -d" " -s -f2`
285	fi
286	done
287
288	if [[ "$local_depository_path" = "" ]]
289	then
290	if [[ "$global_depository_path" != "" ]]
291	then
292	local_depository_path=$global_depository_path
293	else
294	printf "\n +++ no depository path found in configuration file"
295	printf "\n for local host \"$local_host\" "
296	printf "\n please set \"\%depository_path\" in configuration file"
297	locat=config_file; exit
298	fi
299	fi
300	eval local_depository_path=$local_depository_path
301	eval local_depository_path=$local_depository_path
302
303
304
305	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
306	# VEREINBART WURDE
307	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
308	then
309	printf "\n +++ no main program or more than one main program defined"
310	printf "\n in configuration file"
311	locat=configuration; exit
312	else
313	line=`grep "%mainprog" $config_file`
314	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
315	then
316	printf "\n +++ no main program defined in configuration file"
317	locat=configuration; exit
318	fi
319	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
320	fi
321
322
323
324	# MAKEFILE vorhanden
325	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
326	if [[ ! -f $makefile ]]
327	then
328	printf "\n +++ makefile: "
329	printf "\n $makefile"
330	printf "\n does not exist"
331	locat=makefile; exit
332	fi
333
334
335	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
336	calltime=$(date)
337	printf "\n"
338	printf "#------------------------------------------------------------------------# \n"
339	printf "\| $version$calltime \| \n"
340	printf "\| \| \n"
341	column1="called on:"; column2=$local_host_real_name
342	printf "\| $column1$column2 \| \n"
343	column1="local username:"; column2=$local_username
344	printf "\| $column1$column2 \| \n"
345	column1="local IP-addres:"; column2=$local_addres
346	printf "\| $column1$column2 \| \n"
347	column1="config file:"; column2=$config_file
348	printf "\| $column1$column2 \| \n"
349	column1="makefile:"; column2=$makefile
350	printf "\| $column1$column2 \| \n"
351	column1="local source path:"; column2=$local_source_path
352	printf "\| $column1$column2 \| \n"
353	column1="make depository:"; column2=$local_depository_path
354	printf "\| $column1$column2 \| \n"
355	printf "#------------------------------------------------------------------------# \n"
356
357	# printf "\| \| \n"
358
359
360	cd $local_source_path
361
362
363	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
364	source_code_files=`ls -1 *.$suf`
365
366
367
368	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
369	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
370	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
371	if [[ ! -d $local_depository_path ]]
372	then
373	if mkdir $local_depository_path
374	then
375	printf "\n\n *** directory for make depository:"
376	printf "\n $local_depository_path"
377	printf "\n was created\n"
378
379	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
380	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
381	printf "\n *** makefile and source code files are copied to"
382	printf "\n $local_depository_path\n"
383	printf "\n copying makefile \"$makefile\" ..."
384	cp -p $makefile $local_depository_path/Makefile
385
386	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
387	# SEIN
388	for filename in $source_code_files
389	do
390	if [[ $(grep -c $filename $makefile) = 0 ]]
391	then
392	printf "\n +++ source code file:"
393	printf "\n $filename"
394	printf "\n is not listed in makefile"
395	locat=makefile; exit
396	else
397	printf "\n copying source code file \"$filename\" ..."
398	cp -p $filename $local_depository_path
399	fi
400	done
401	printf "\n"
402	else
403	printf "\n +++ directory for make depository:"
404	printf "\n $local_depository_path"
405	printf "\n cannot be created"
406	locat=local_depository_path; exit
407	fi
408	else
409
410	printf "\n *** checking file status ..."
411
412	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
413	if [[ $makefile -nt $local_depository_path/Makefile ]]
414	then
415	printf "\n *** update of \"$makefile\" "
416	cp -f -p $makefile $local_depository_path/Makefile
417	update=true
418
419	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
420	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
421	cd $local_depository_path
422	source_code_files_in_depository=`ls -1 *.$suf`
423	for filename in $source_code_files_in_depository
424	do
425	if [[ $(grep -c $filename Makefile) = 0 ]]
426	then
427	printf "\n *** source code file in \"$local_depository_path\":"
428	printf "\n $filename"
429	printf "\n is not listed in makefile"
430	if [[ $silent = false ]]
431	then
432	answer=dummy
433	printf "\n\n"
434	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
435	do
436	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
437	read answer
438	done
439	if [[ $answer = y \|\| $answer = Y ]]
440	then
441	base=`echo $filename \| cut -d. -f2`
442	rm -f $filename
443	rm -f ${base}.o ${base}.mod
444	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
445	else
446	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
447	fi
448	fi
449	fi
450	done
451	cd - > /dev/null 2>&1
452
453	elif [[ $local_depository_path/Makefile -nt $makefile ]]
454	then
455	printf "\n *** makefile in depository is newer than"
456	printf "\n \"$makefile\" "
457	if [[ $silent = false ]]
458	then
459	answer=dummy
460	printf "\n\n"
461	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
462	do
463	printf " >>> update \"$makefile\" (y/n) ? "
464	read answer
465	done
466	if [[ $answer = y \|\| $answer = Y ]]
467	then
468	cp -f -p $local_depository_path/Makefile $makefile
469	printf "\n *** \"$makefile\" updated"
470	else
471	printf "\n *** \"$makefile\" not updated"
472	fi
473	fi
474	fi
475
476	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
477	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
478	for filename in $source_code_files
479	do
480	if [[ $(grep -c $filename $makefile) = 0 ]]
481	then
482	printf "\n +++ source code file:"
483	printf "\n $filename"
484	printf "\n is not listed in makefile"
485	locat=makefile; exit
486	else
487	if [[ ! -f $local_depository_path/$filename ]]
488	then
489	cp -p $filename $local_depository_path
490	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
491	fi
492	if [[ $filename -nt $local_depository_path/$filename ]]
493	then
494	printf "\n *** update of source code file \"$filename\" "
495	cp -f -p $filename $local_depository_path
496	update=true
497	fi
498	fi
499	done
500
501
502	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
503	# ODER EVTL. NEUEREN DATUMS SIND
504	cd $local_depository_path
505	source_code_files_in_depository=`ls -1 *.$suf`
506	cd - > /dev/null 2>&1
507	for filename in $source_code_files_in_depository
508	do
509	if [[ ! -f $filename ]]
510	then
511	printf "\n *** source code file \"$filename\" does not exist in current directory"
512	if [[ $silent = false ]]
513	then
514	answer=dummy
515	printf "\n\n"
516	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
517	do
518	printf " >>> create \"$filename\" in current directory (y/n) ? "
519	read answer
520	done
521	if [[ $answer = y \|\| $answer = Y ]]
522	then
523	cp -p $local_depository_path/$filename $filename
524	printf "\n *** source code file \"$filename\" created in current directory"
525	else
526	printf "\n *** source code file \"$filename\" not created in current directory"
527	fi
528	fi
529	elif [[ $local_depository_path/$filename -nt $filename ]]
530	then
531	ls -al $local_depository_path/$filename
532	ls -al $filename
533	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
534	if [[ $silent = false ]]
535	then
536	answer=dummy
537	printf "\n\n"
538	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
539	do
540	printf " >>> update \"$filename\" in current directory (y/n) ? "
541	read answer
542	done
543	if [[ $answer = y \|\| $answer = Y ]]
544	then
545	cp -f -p $local_depository_path/$filename $filename
546	printf "\n *** source code file \"$filename\" updated in current directory"
547	else
548	printf "\n *** source code file \"$filename\" not updated in current directory"
549	fi
550	fi
551	fi
552	done
553
554	if [[ $update = false ]]
555	then
556	printf "\n *** no updates necessary in \"$local_depository_path\" "
557	if [[ $silent = false ]]
558	then
559	answer=dummy
560	printf "\n\n"
561	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
562	do
563	printf " >>> continue with updates on remote hosts (y/n) ? "
564	read answer
565	done
566	if [[ $answer = n \|\| $answer = N ]]
567	then
568	locat=user_abort; exit
569	fi
570	fi
571	fi
572	fi
573
574
575
576	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
577	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
578	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
579	printf "\n\n *** tar of makefile and source files in depository ..."
580	cd $local_depository_path
581	chmod u+w Makefile *.$suf
582	tar -cf ${mainprog}_sources.tar Makefile *.$suf
583	printf "\n"
584
585
586
587	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
588	if [[ $host = all ]]
589	then
590	printf "\n *** updates will be made for ALL hosts found in"
591	printf "\n the configuration file"
592	else
593	printf "\n *** update will be made for host \"$host\" "
594	fi
595
596	if [[ $silent = false ]]
597	then
598	answer=dummy
599	printf "\n\n"
600	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
601	do
602	printf " >>> continue (y/n) ? "
603	read answer
604	done
605	if [[ $answer = n \|\| $answer = N ]]
606	then
607	locat=user_abort; exit
608	fi
609	fi
610
611
612
613
614	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
615	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
616	printf "\n *** scanning configuration file for host(s) ..."
617
618	grep %fopts $config_file \| while read line
619	do
620	# KOMMENTARZEILEN UEBERSPRINGEN
621	[[ $(echo $line \| cut -c1) = "#" ]] && continue
622	(( ihost = ihost + 1 ))
623	hostline[$ihost]="$line"
624	done
625
626
627	while (( ih < ihost ))
628	do
629
630	(( ih = ih + 1 ))
631
632	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
633	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
634	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
635	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
636	remote_host=`echo $remote_host_string \| cut -d" " -f1`
637	if [[ $host != all ]]
638	then
639	[[ $remote_host != $host ]] && continue
640	fi
641	host_found=true
642	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
643	if [[ $condition1 = $remote_host ]]
644	then
645	condition1=""
646	else
647	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
648	fi
649
650
651	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
652	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
653	then
654	if [[ $ibm_hb_done = true ]]
655	then
656	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
657	printf "\n been carried out on one of the HLRN machines\n"
658	continue
659	fi
660	fi
661
662	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
663	if [[ $remote_host = lcmuk ]]
664	then
665	if [[ $lcmuk_done = true ]]
666	then
667	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
668	printf "\n been carried out on this host\n"
669	continue
670	fi
671	fi
672
673
674	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
675	netcdf_support=false
676	case $remote_host in
677	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
678	netcdf_support=true
679	if [[ $scirocco = true ]]
680	then
681	netcdf_path=/opt/netcdf/3.6.2-beta4
682	else
683	netcdf_path=/muksoft/packages/netcdf/linux
684	fi;;
685	(lctit) remote_addres=172.17.75.161; netcdf_support=true
686	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
687	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
688	netcdf_path=/usr/local/netcdf-3.5.1;;
689	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
690	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
691	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
692	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
693	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
694	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
695	netcdf_path=/applic/lib/NETCDF64;;
696	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
697	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
698	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
699	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
700	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
701	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
702	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
703	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
704	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
705	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
706	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
707	(*) printf "\n +++ remote host \"$remote_host\" unknown";
708	printf "\n please inform S. Raasch!";
709	locat=config_file; exit;;
710	esac
711
712
713	# REMOTE-USERNAMEN ERMITTELN
714	line=""
715	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
716	do
717	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
718	then
719	line="$line1"
720	fi
721	done
722
723	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
724	then
725	printf "\n +++ no remote username found in configuration file"
726	printf "\n for \"$remote_host_string\" "
727	locat=config_file; exit
728	else
729	remote_username=`echo $line \| cut -d" " -s -f2`
730	fi
731
732
733	# REMOTE-QUELLTEXTPFAD ERMITTELN
734	line=""
735	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
736	do
737	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
738	then
739	line="$line1"
740	fi
741	done
742
743	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
744	then
745	remote_source_path=`echo $line \| cut -d" " -s -f2`
746	fi
747	if [[ "$remote_source_path" = "" ]]
748	then
749	if [[ "$global_source_path" != "" ]]
750	then
751	remote_source_path=$global_source_path
752	else
753	printf "\n +++ no source path found in configuration file"
754	printf "\n for \"$remote_host_string\" "
755	locat=config_file; exit
756	fi
757	fi
758
759	remote_ud=${remote_source_path}/../UTIL
760
761	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
762	line=""
763	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
764	do
765	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
766	then
767	line="$line1"
768	fi
769	done
770
771	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
772	then
773	remote_md=`echo $line \| cut -d" " -s -f2`
774	fi
775	if [[ "$remote_md" = "" ]]
776	then
777	if [[ "$global_depository_path" != "" ]]
778	then
779	remote_md=$global_depository_path
780	else
781	printf "\n +++ no depository path found in configuration file"
782	printf "\n for \"$remote_host_string\" "
783	printf "\n please set \"\%depository_path\" in configuration file"
784	locat=config_file; exit
785	fi
786	fi
787
788	remote_md=$(eval echo $remote_md)
789
790
791	# COMPILERNAMEN ERMITTELN
792	line=""
793	grep "$remote_host_string" $config_file \| grep "%compiler_name" \| while read line1
794	do
795	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
796	then
797	line="$line1"
798	fi
799	done
800
801	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
802	then
803	printf "\n +++ no compiler name found in configuration file"
804	printf "\n for \"$remote_host_string\" "
805	locat=config_file; exit
806	else
807	compiler_name=`echo $line \| cut -d" " -s -f2`
808	fi
809
810
811
812	# PRAEPROZESSOR-DIREKTIVEN SETZEN
813	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
814	then
815	if [[ $remote_host = ibms ]]
816	then
817	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
818	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
819	else
820	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
821	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
822	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
823	fi
824	elif [[ $remote_host = lcmuk ]]
825	then
826	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
827	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
828	elif [[ $remote_host = lctit ]]
829	then
830	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
831	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
832	elif [[ $remote_host = decalpha ]]
833	then
834	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
835	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
836	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
837	then
838	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
839	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
840	fi
841
842	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
843	then
844	for string in $remote_host_string
845	do
846	if [[ $(echo $string \| cut -c1-3) = ibm ]]
847	then
848	cpp_options="${cpp_options},-D__ibm"
849	if [[ $remote_host = ibmy ]]
850	then
851	cpp_options="${cpp_options},-D__ibmy_special"
852	fi
853	else
854	cpp_options="${cpp_options},-D__$string"
855	fi
856	done
857	cpp_options="$cpp_options "
858	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
859	then
860	for string in $remote_host_string
861	do
862	if [[ $(echo $string \| cut -c1-3) = nec ]]
863	then
864	cpp_options="${cpp_options} -D__nec"
865	else
866	cpp_options="${cpp_options} -D__$string"
867	fi
868	done
869	cpp_options="$cpp_options "
870	else
871	for string in $remote_host_string
872	do
873	cpp_options="$cpp_options -D__$string "
874	done
875	fi
876
877
878	# COMPILEROPTIONEN ERMITTELN
879	line=""
880	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
881	do
882	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
883	then
884	line="$line1"
885	fi
886	done
887	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
888	then
889	printf "\n +++ no compiler options found in configuration file"
890	printf "\n for \"$remote_host_string\" "
891	locat=config_file; exit
892	else
893	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
894	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
895	fi
896	if [[ $netcdf_support = true ]]
897	then
898	case $remote_host in
899	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
900	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
901	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
902	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
903	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
904	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
905	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
906	esac
907	fi
908
909
910
911	# LADER-OPTIONEN ERMITTELN
912	line=""
913	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
914	do
915	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
916	then
917	line="$line1"
918	fi
919	done
920
921	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
922	then
923	printf "\n +++ no loader options found in configuration file"
924	printf "\n for \"$remote_host_string\" "
925	locat=config_file; exit
926	else
927	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
928	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
929	fi
930	if [[ $netcdf_support = true ]]
931	then
932	case $remote_host in
933	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
934	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
935	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
936	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
937	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
938	esac
939	fi
940
941
942	printf "\n\n#------------------------------------------------------------------------# \n"
943	if [[ $remote_host = $local_host ]]
944	then
945	column1="remote_host:"; column2="$remote_host (= local host!)"
946	else
947	column1="remote_host:"; column2=$remote_host
948	fi
949	printf "\| $column1$column2 \| \n"
950	printf "\| \| \n"
951	column1="conditions:"; column2="$condition1 $condition2"
952	printf "\| $column1$column2 \| \n"
953	column1="make depository:"; column2=$remote_md
954	printf "\| $column1$column2 \| \n"
955	column1="username:"; column2=$remote_username
956	printf "\| $column1$column2 \| \n"
957	column1="addres:"; column2=$remote_addres
958	printf "\| $column1$column2 \| \n"
959	column1="compiler:"; column2=$compiler_name
960	printf "\| $column1$column2 \| \n"
961	column1="cpp options:"; column2=$cpp_options
962	printf "\| $column1$column2 \| \n"
963	line=$(echo "$cpp_options" \| cut -c51-)
964	while [[ "$line" != "" ]]
965	do
966	column1=""
967	column2=$line
968	printf "\| $column1$column2 \| \n"
969	line=$(echo "$line" \| cut -c51-)
970	done
971	column1="compiler options:"; column2=$compiler_options
972	printf "\| $column1$column2 \| \n"
973	line=$(echo "$compiler_options" \| cut -c51-)
974	while [[ "$line" != "" ]]
975	do
976	column1=""
977	column2=$line
978	printf "\| $column1$column2 \| \n"
979	line=$(echo "$line" \| cut -c51-)
980	done
981	column1="loader options:"; column2=$loader_options
982	printf "\| $column1$column2 \| \n"
983	line=$(echo "$loader_options" \| cut -c51-)
984	while [[ "$line" != "" ]]
985	do
986	column1=""
987	column2=$line
988	printf "\| $column1$column2 \| \n"
989	line=$(echo "$line" \| cut -c51-)
990	done
991	printf "#------------------------------------------------------------------------# \n"
992
993	if [[ $silent = false ]]
994	then
995	answer=dummy
996	printf "\n\n"
997	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
998	do
999	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1000	read answer
1001	done
1002	if [[ $answer = a \|\| $answer = A ]]
1003	then
1004	locat=user_abort; exit
1005	fi
1006	if [[ $answer = c \|\| $answer = C ]]
1007	then
1008	silent=false
1009	fi
1010	if [[ $answer = s \|\| $answer = S ]]
1011	then
1012	continue
1013	fi
1014	fi
1015
1016
1017	if [[ $remote_mode = batch ]]
1018	then
1019
1020	# BATCH-JOB PARAMETER SETZEN
1021	case $remote_host in
1022	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1023	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1024	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1025	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1026	esac
1027
1028
1029	# BATCH-JOB ZUSAMMENSTELLEN
1030	printf "\n *** creating batch-job for remote host"
1031	echo " " > mbuild_job
1032
1033	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1034	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1035	if [[ $remote_host = t3ej2 ]]
1036	then
1037	echo "set +vx" >> mbuild_job
1038	echo ". .profile" >> mbuild_job
1039	echo "set -x" >> mbuild_job
1040	fi
1041
1042	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1043	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1044	then
1045	echo "module list" >> mbuild_job
1046	fi
1047
1048
1049	# WECHSEL IN TEMPORAERES VERZEICHNIS
1050	echo "cd ${remote_md}" >> mbuild_job
1051
1052
1053	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1054	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1055	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1056
1057
1058	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1059	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1060
1061
1062	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1063	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1064
1065
1066	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1067	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1068	echo "chmod u+w *" >> mbuild_job
1069
1070	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1071	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1072
1073
1074	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1075	echo "make clean" >> mbuild_job
1076	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1077	echo "rm *.f90 Makefile" >> mbuild_job
1078
1079
1080
1081	# JOB MITTELS SUBJOB STARTEN
1082	printf "\n *** sending batch job to remote host"
1083	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1084
1085
1086	# JOBFILE LOESCHEN
1087	# rm aljob
1088
1089	else
1090
1091	if [[ $remote_host != $local_host ]]
1092	then
1093
1094	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1095	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1096	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1097	if [[ $remote_host != lctit ]]
1098	then
1099	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1100	else
1101	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1102	# MIT SSH, DESHALB AUFRUF PER PIPE
1103	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1104	fi
1105	if [[ $local_host = decalpha ]]
1106	then
1107	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1108	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1109	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1110	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1111	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1112	else
1113	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1114	fi
1115
1116
1117
1118	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1119	echo " *** untar previous update on remote host, if existing"
1120	if [[ $remote_host != lctit ]]
1121	then
1122	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1123	else
1124	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1125	# MIT SSH, DESHALB AUFRUF PER PIPE
1126	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1127	fi
1128
1129
1130	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1131	echo " *** untar actual sources on remote host"
1132	if [[ $remote_host != lctit ]]
1133	then
1134	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1135	else
1136	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1137	# MIT SSH, DESHALB AUFRUF PER PIPE
1138	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1139	fi
1140
1141
1142	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1143	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1144	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1145	# Z.B. DIE PFADE ZUM COMPILER)
1146	echo " *** execute \"make\" on remote host"
1147
1148	if [[ $remote_host = nech ]]
1149	then
1150	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1151	else
1152	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1153	fi
1154
1155	if [[ $remote_host = t3eh ]]
1156	then
1157
1158	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1159
1160	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1161	then
1162
1163	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1164
1165	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1166	then
1167
1168	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1169
1170	elif [[ $remote_host = lctit ]]
1171	then
1172
1173	echo " " > ${remote_host}_last_make_protokoll
1174	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1175	do
1176	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1177	done
1178
1179	else
1180
1181	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1182
1183	fi
1184
1185	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1186	then
1187	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1188	if [[ $silent = false ]]
1189	then
1190	answer=dummy
1191	printf "\n"
1192	while [[ "$answer" != c && "$answer" != k ]]
1193	do
1194	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1195	read answer
1196	if [[ "$answer" = l ]]
1197	then
1198	more ${remote_host}_last_make_protokoll
1199	fi
1200	done
1201	if [[ $answer = k ]]
1202	then
1203	locat=user_abort; exit
1204	fi
1205	fi
1206	fi
1207
1208
1209
1210	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1211	printf "\n *** tar update on remote host ..."
1212	if [[ $remote_host != lctit ]]
1213	then
1214	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1215	else
1216	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1217	# MIT SSH, DESHALB AUFRUF PER PIPE
1218	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1219	fi
1220
1221
1222	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1223	# printf "\n *** \"make clean\" on remote host ..."
1224	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1225	# printf "\n"
1226
1227
1228	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1229	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1230	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1231	if [[ $compile_utility_programs = true ]]
1232	then
1233
1234	echo " *** copying utility programs to \"${remote_addres}:${remote_ud}/\" "
1235	cd ${local_source_path}/../UTIL
1236	echo " remote_ud=\"$remote_ud\" "
1237
1238	if [[ $remote_host != lctit ]]
1239	then
1240	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" *** ${remote_ud} will be created\"; mkdir -p ${remote_ud})"
1241	else
1242	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1243	# MIT SSH, DESHALB AUFRUF PER PIPE
1244	print "[[ ! -d ${remote_ud} ]] && (echo \" *** ${remote_ud} will be created\"; mkdir -p ${remote_ud})" \| ssh ${remote_username}@${remote_addres} 2>&1
1245	fi
1246
1247	if [[ $local_host = decalpha ]]
1248	then
1249	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1250	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1251	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1252	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1253	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud}
1254	else
1255	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud}
1256	fi
1257
1258
1259
1260	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1261	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1262	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1263	# Z.B. DIE PFADE ZUM COMPILER)
1264	echo " *** execute \"make\" on remote host"
1265
1266	if [[ $remote_host = nech ]]
1267	then
1268	make_call_string="sxmake F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1269	else
1270	make_call_string="make F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1271	fi
1272
1273	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1274	then
1275
1276	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1277
1278	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1279	then
1280
1281	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1282
1283	elif [[ $remote_host = lctit ]]
1284	then
1285
1286	echo " " > ${remote_host}_last_make_protokoll
1287	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1288	do
1289	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1290	done
1291
1292	else
1293
1294	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1295
1296	fi
1297
1298	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1299	then
1300	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1301	if [[ $silent = false ]]
1302	then
1303	answer=dummy
1304	printf "\n"
1305	while [[ "$answer" != c && "$answer" != k ]]
1306	do
1307	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1308	read answer
1309	if [[ "$answer" = l ]]
1310	then
1311	more ${remote_host}_last_make_protokoll
1312	fi
1313	done
1314	if [[ $answer = k ]]
1315	then
1316	locat=user_abort; exit
1317	fi
1318	fi
1319	fi
1320	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1321
1322
1323	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1324	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1325
1326	else
1327
1328	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1329	echo " "
1330	echo " *** execute \"make\" on local host"
1331
1332	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1333
1334	if [[ $? != 0 ]]
1335	then
1336	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1337	if [[ $silent = false ]]
1338	then
1339	answer=dummy
1340	printf "\n"
1341	while [[ "$answer" != c && "$answer" != k ]]
1342	do
1343	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1344	read answer
1345	if [[ "$answer" = l ]]
1346	then
1347	more ${remote_host}_last_make_protokoll
1348	fi
1349	done
1350	if [[ $answer = k ]]
1351	then
1352	locat=user_abort; exit
1353	fi
1354	fi
1355	fi
1356
1357
1358	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1359	printf "\n *** tar update on local host ..."
1360	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1361
1362
1363	# COMPILE THE UTILITY PROGRAMS
1364	if [[ $compile_utility_programs = true ]]
1365	then
1366	printf "\n\n"
1367	echo " *** compiling the utility programs ..."
1368	cd ${local_source_path}/../UTIL
1369	make F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1370	cd - > /dev/null
1371	fi
1372
1373
1374	# NUR EINMAL AUF LCMUK UEBERSETZEN
1375	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1376
1377	fi
1378
1379	fi
1380	done
1381
1382
1383	if [[ $host_found = false ]]
1384	then
1385	if [[ $host = all ]]
1386	then
1387	printf "\n +++ no hosts found in configuration file"
1388	else
1389	printf "\n +++ host \"$host\" not found in configuration file"
1390	fi
1391	locat=config_file; exit
1392	fi
1393
1394
1395
1396	# ABSCHLIESSENDE ARBEITEN
1397	rm -f hosts_found_in_config_file
1398

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SCRIPTS/mbuild_new @ 22

Download in other formats: