Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild_new @ 9

Last change on this file since 9 was 9, checked in by raasch, 18 years ago
test printing removed from mbuild
File size: 47.0 KB

Rev	Line
[1]	1	#!/bin/ksh
[5]	2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 10/02/07
[1]	3
	4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	6	# Rechner
	7
	8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	9	# verwendet wird:
	10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	11	# nach aussen weitergegeben. "while read line" funktioniert nicht
	12	# innerhalb einer Pipe.
	13
	14	# letzte Aenderung:
	15	# 06/05/02 - Siggi - Beginn der Entwicklung
	16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	20	# benutzt wird
	21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	22	# 19/12/02 - Siggi - ibmb validiert
	23	# 05/02/03 - Siggi - hostname nobela included
	24	# 04/03/03 - Siggi - host nech included
	25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	26	# file LAST_MAKE_CALL (otherwise error on NEC, because
	27	# '' are part of compiler options
	28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	29	# string, in case that palm.f90 version contains
	30	# such strings
	31	# 16/04/03 - Siggi - First extensions for linux machines
	32	# 24/06/03 - Siggi - host orkan included
	33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	34	# 24/07/03 - Siggi - host maestro admitted
	35	# 06/08/03 - Siggi - host gregale admitted
	36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	39	# (-D$OMP=OMP) in order to avoid problems with
	40	# OMP_NUM_THREADS
	41	# 09/01/04 - Siggi - action above cancelled
	42	# 28/01/04 - Siggi - action above re-cancelled
	43	# 08/03/04 - Siggi - host scirocco admitted
	44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	45	# the respective .f90 file is not listed in the makefile
	46	# and deletion is demanded by the user
	47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	48	# due to error in ssh installation (otherwise a prompt
	49	# for the password appears)
	50	# 23/07/04 - Siggi - changes due to the new berni configuration
	51	# (federation switch)
	52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	56	# 24/04/05 - Siggi - netcdf support on lcmuk
	57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	58	# 12/05/05 - Siggi - netcdf support on ibm
	59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	60	# 18/05/05 - Siggi - netcdf support on nec
	61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	62	# 23/05/05 - Siggi - netcdf support on ibms
	63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	64	# 30/06/05 - Siggi - netcdf support on bora
	65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	68	# host gfdl5 (ibmy) admitted
	69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	70	# 20/01/06 - Siggi - cpp directive for ibmy
	71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	72	# 10/02/06 - Siggi - modifications for scp on decalpha
	73	# 13/04/06 - Siggi - ostria admitted
	74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	76	# 29/05/05 - Siggi - atmos (lcide) admitted
	77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	78	# 24/11/06 - Siggi - breva and levanto admitted
	79	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	80	# 10/02/07 - Siggi - all hpmuk-related code removed
[1]	81
	82
	83
	84	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	85	config_file=.mrun.config
	86	host=all
	87	host_found=false
	88	ibm_hb_done=false
	89	lcmuk_done=false
	90	locat=normal
	91	makefile=""
	92	remote_mode=interactive
	93	scirocco=false
	94	silent=false
	95	suf=f90
	96	update=false
	97
	98	typeset -i ih ihost=0
	99
	100	typeset -R50 calltime
	101	typeset -L20 column1
	102	typeset -L50 column2
	103	typeset -L70 column3
	104	typeset -L20 version="MBUILD 1.0"
	105
	106	# FEHLERBEHANDLUNG
	107	# BEI EXIT:
	108	trap 'if [[ $locat != normal ]]
	109	then
	110	printf "\n\n +++ mbuild killed \n\n"
	111	else
	112	printf "\n\n *** mbuild finished \n\n"
	113	fi' exit
	114
	115
	116	# BEI TERMINAL-BREAK:
	117	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
	118	exit
	119	' 2
	120
	121
	122
	123	# SHELLSCRIPT-OPTIONEN EINLESEN
	124	while getopts :c:h:m:rs: option
	125	do
	126	case $option in
	127	(c) config_file=$OPTARG;;
	128	(h) host=$OPTARG;;
	129	(m) makefile=$OPTARG;;
	130	(r) remote_mode=batch;;
	131	(s) suf=$OPTARG;;
	132	(\?) printf "\n +++ unknown option $OPTARG \n";
	133	locat=parameter; exit;;
	134	esac
	135	done
	136
	137
	138
	139	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	140	if [[ $remote_mode = batch ]]
	141	then
	142	printf "\n +++ sorry, batch mode does not work! \n"
	143	locat=parameter; exit
	144	fi
	145
	146
	147
	148	# LOKALEN RECHNER ERMITTELN
	149	local_host_real_name=$(hostname)
	150	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	151	case $local_host_real_name in
	152	(atmos) local_host=lcide;;
	153	(berte) local_host=t3eb;;
	154	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
	155	(gate) local_host=neck;;
	156	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
	157	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
	158	(gwdk081.gwdg.de) local_host=ibm;;
	159	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
	160	(nobel\|nobela) local_host=ibms;;
	161	(tgg*) local_host=lctit;;
	162	(t3e) local_host=t3eh;;
	163	(zam003) local_host=t3ej2;;
	164	(zam005) local_host=t3ej5;;
	165	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
	166	locat=local_host; exit;;
	167	esac
	168
	169	[[ $local_host_real_name = scirocco ]] && scirocco=true
	170
	171
	172
	173	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	174	if [[ ! -f $config_file ]]
	175	then
	176	printf "\n +++ configuration file: "
	177	printf "\n $config_file"
	178	printf "\n does not exist"
	179	locat=configuration; exit
	180	fi
	181	if [[ $local_host != ibms ]]
	182	then
	183	config_file=$PWD/$config_file
	184	else
	185	config_file=`pwd`/$config_file
	186	fi
	187
	188
	189
	190	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	191	line=""
	192	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
	193	do
	194	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
	195	then
	196	local_username=`echo $line \| cut -d" " -s -f2`
	197	fi
	198	done
	199
	200	if [[ "$local_username" = "" ]]
	201	then
	202	printf "\n +++ no user name found in configuration file"
	203	printf "\n for local host \"$local_host\" "
	204	locat=config_file; exit
	205	fi
	206
	207
[5]	208	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	209	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	210	# VEREINBART WURDE.
	211	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	212	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	213	line=""
	214	grep "%" $config_file \| while read line
	215	do
	216	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
[1]	217	then
[5]	218	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	219	value=`echo $line \| cut -d" " -s -f2`
[8]	220	eval export $var=\$value
[9]	221	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	222	fi
[5]	223	done
[1]	224
[5]	225	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	226	line=""
	227	grep "%source_path" $config_file \| while read line
	228	do
	229	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	230	then
	231	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	232	then
	233	global_source_path=`echo $line \| cut -d" " -s -f2`
	234	fi
	235	fi
	236	done
	237
	238	line=""
	239	grep " $local_host" $config_file \| grep "%source_path" \| while read line
	240	do
	241	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	242	then
	243	local_source_path=`echo $line \| cut -d" " -s -f2`
	244	fi
	245	done
	246
	247	if [[ "$local_source_path" = "" ]]
	248	then
	249	if [[ "$global_source_path" != "" ]]
	250	then
	251	local_source_path=$global_source_path
	252	else
	253	printf "\n +++ no source path found in configuration file"
	254	printf "\n for local host \"$local_host\" "
	255	printf "\n please set \"\%source_path\" in configuration file"
	256	locat=config_file; exit
	257	fi
	258	fi
	259	eval local_source_path=$local_source_path
[8]	260	eval local_source_path=$local_source_path
[1]	261
	262
	263	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
	264	line=""
	265	grep "%depository_path" $config_file \| while read line
	266	do
	267	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	268	then
	269	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	270	then
	271	global_depository_path=`echo $line \| cut -d" " -s -f2`
	272	fi
	273	fi
	274	done
	275
	276	line=""
	277	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
	278	do
	279	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	280	then
	281	local_depository_path=`echo $line \| cut -d" " -s -f2`
	282	fi
	283	done
	284
	285	if [[ "$local_depository_path" = "" ]]
	286	then
	287	if [[ "$global_depository_path" != "" ]]
	288	then
	289	local_depository_path=$global_depository_path
	290	else
	291	printf "\n +++ no depository path found in configuration file"
	292	printf "\n for local host \"$local_host\" "
	293	printf "\n please set \"\%depository_path\" in configuration file"
	294	locat=config_file; exit
	295	fi
	296	fi
	297	eval local_depository_path=$local_depository_path
[8]	298	eval local_depository_path=$local_depository_path
[1]	299
	300
	301
[5]	302	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	303	# VEREINBART WURDE
	304	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	305	then
	306	printf "\n +++ no main program or more than one main program defined"
	307	printf "\n in configuration file"
	308	locat=configuration; exit
	309	else
	310	line=`grep "%mainprog" $config_file`
	311	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	312	then
	313	printf "\n +++ no main program defined in configuration file"
	314	locat=configuration; exit
	315	fi
	316	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	317	fi
	318
	319
	320
[1]	321	# MAKEFILE vorhanden
	322	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	323	if [[ ! -f $makefile ]]
	324	then
	325	printf "\n +++ makefile: "
	326	printf "\n $makefile"
	327	printf "\n does not exist"
	328	locat=makefile; exit
	329	fi
	330
	331
	332	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	333	calltime=$(date)
	334	printf "\n"
	335	printf "#------------------------------------------------------------------------# \n"
	336	printf "\| $version$calltime \| \n"
	337	printf "\| \| \n"
	338	column1="called on:"; column2=$local_host_real_name
	339	printf "\| $column1$column2 \| \n"
	340	column1="local username:"; column2=$local_username
	341	printf "\| $column1$column2 \| \n"
	342	column1="local IP-addres:"; column2=$local_addres
	343	printf "\| $column1$column2 \| \n"
	344	column1="config file:"; column2=$config_file
	345	printf "\| $column1$column2 \| \n"
	346	column1="makefile:"; column2=$makefile
	347	printf "\| $column1$column2 \| \n"
	348	column1="local source path:"; column2=$local_source_path
	349	printf "\| $column1$column2 \| \n"
	350	column1="make depository:"; column2=$local_depository_path
	351	printf "\| $column1$column2 \| \n"
	352	printf "#------------------------------------------------------------------------# \n"
	353
	354	# printf "\| \| \n"
	355
	356
	357	cd $local_source_path
	358
	359
	360	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
	361	source_code_files=`ls -1 *.$suf`
	362
	363
	364
	365	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
	366	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
	367	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
	368	if [[ ! -d $local_depository_path ]]
	369	then
	370	if mkdir $local_depository_path
	371	then
	372	printf "\n\n *** directory for make depository:"
	373	printf "\n $local_depository_path"
	374	printf "\n was created\n"
	375
	376	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
	377	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
	378	printf "\n *** makefile and source code files are copied to"
	379	printf "\n $local_depository_path\n"
	380	printf "\n copying makefile \"$makefile\" ..."
	381	cp -p $makefile $local_depository_path/Makefile
	382
	383	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
	384	# SEIN
	385	for filename in $source_code_files
	386	do
	387	if [[ $(grep -c $filename $makefile) = 0 ]]
	388	then
	389	printf "\n +++ source code file:"
	390	printf "\n $filename"
	391	printf "\n is not listed in makefile"
	392	locat=makefile; exit
	393	else
	394	printf "\n copying source code file \"$filename\" ..."
	395	cp -p $filename $local_depository_path
	396	fi
	397	done
	398	printf "\n"
	399	else
	400	printf "\n +++ directory for make depository:"
	401	printf "\n $local_depository_path"
	402	printf "\n cannot be created"
	403	locat=local_depository_path; exit
	404	fi
	405	else
	406
	407	printf "\n *** checking file status ..."
	408
	409	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
	410	if [[ $makefile -nt $local_depository_path/Makefile ]]
	411	then
	412	printf "\n *** update of \"$makefile\" "
	413	cp -f -p $makefile $local_depository_path/Makefile
	414	update=true
	415
	416	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
	417	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
	418	cd $local_depository_path
	419	source_code_files_in_depository=`ls -1 *.$suf`
	420	for filename in $source_code_files_in_depository
	421	do
	422	if [[ $(grep -c $filename Makefile) = 0 ]]
	423	then
	424	printf "\n *** source code file in \"$local_depository_path\":"
	425	printf "\n $filename"
	426	printf "\n is not listed in makefile"
	427	if [[ $silent = false ]]
	428	then
	429	answer=dummy
	430	printf "\n\n"
	431	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	432	do
	433	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
	434	read answer
	435	done
	436	if [[ $answer = y \|\| $answer = Y ]]
	437	then
	438	base=`echo $filename \| cut -d. -f2`
	439	rm -f $filename
	440	rm -f ${base}.o ${base}.mod
	441	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
	442	else
	443	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
	444	fi
	445	fi
	446	fi
	447	done
	448	cd - > /dev/null 2>&1
	449
	450	elif [[ $local_depository_path/Makefile -nt $makefile ]]
	451	then
	452	printf "\n *** makefile in depository is newer than"
	453	printf "\n \"$makefile\" "
	454	if [[ $silent = false ]]
	455	then
	456	answer=dummy
	457	printf "\n\n"
	458	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	459	do
	460	printf " >>> update \"$makefile\" (y/n) ? "
	461	read answer
	462	done
	463	if [[ $answer = y \|\| $answer = Y ]]
	464	then
	465	cp -f -p $local_depository_path/Makefile $makefile
	466	printf "\n *** \"$makefile\" updated"
	467	else
	468	printf "\n *** \"$makefile\" not updated"
	469	fi
	470	fi
	471	fi
	472
	473	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
	474	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
	475	for filename in $source_code_files
	476	do
	477	if [[ $(grep -c $filename $makefile) = 0 ]]
	478	then
	479	printf "\n +++ source code file:"
	480	printf "\n $filename"
	481	printf "\n is not listed in makefile"
	482	locat=makefile; exit
	483	else
	484	if [[ ! -f $local_depository_path/$filename ]]
	485	then
	486	cp -p $filename $local_depository_path
	487	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
	488	fi
	489	if [[ $filename -nt $local_depository_path/$filename ]]
	490	then
	491	printf "\n *** update of source code file \"$filename\" "
	492	cp -f -p $filename $local_depository_path
	493	update=true
	494	fi
	495	fi
	496	done
	497
	498
	499	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
	500	# ODER EVTL. NEUEREN DATUMS SIND
	501	cd $local_depository_path
	502	source_code_files_in_depository=`ls -1 *.$suf`
	503	cd - > /dev/null 2>&1
	504	for filename in $source_code_files_in_depository
	505	do
	506	if [[ ! -f $filename ]]
	507	then
	508	printf "\n *** source code file \"$filename\" does not exist in current directory"
	509	if [[ $silent = false ]]
	510	then
	511	answer=dummy
	512	printf "\n\n"
	513	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	514	do
	515	printf " >>> create \"$filename\" in current directory (y/n) ? "
	516	read answer
	517	done
	518	if [[ $answer = y \|\| $answer = Y ]]
	519	then
	520	cp -p $local_depository_path/$filename $filename
	521	printf "\n *** source code file \"$filename\" created in current directory"
	522	else
	523	printf "\n *** source code file \"$filename\" not created in current directory"
	524	fi
	525	fi
	526	elif [[ $local_depository_path/$filename -nt $filename ]]
	527	then
	528	ls -al $local_depository_path/$filename
	529	ls -al $filename
	530	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
	531	if [[ $silent = false ]]
	532	then
	533	answer=dummy
	534	printf "\n\n"
	535	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	536	do
	537	printf " >>> update \"$filename\" in current directory (y/n) ? "
	538	read answer
	539	done
	540	if [[ $answer = y \|\| $answer = Y ]]
	541	then
	542	cp -f -p $local_depository_path/$filename $filename
	543	printf "\n *** source code file \"$filename\" updated in current directory"
	544	else
	545	printf "\n *** source code file \"$filename\" not updated in current directory"
	546	fi
	547	fi
	548	fi
	549	done
	550
	551	if [[ $update = false ]]
	552	then
	553	printf "\n *** no updates necessary in \"$local_depository_path\" "
	554	if [[ $silent = false ]]
	555	then
	556	answer=dummy
	557	printf "\n\n"
	558	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	559	do
	560	printf " >>> continue with updates on remote hosts (y/n) ? "
	561	read answer
	562	done
	563	if [[ $answer = n \|\| $answer = N ]]
	564	then
	565	locat=user_abort; exit
	566	fi
	567	fi
	568	fi
	569	fi
	570
	571
	572
	573	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
	574	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	575	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
	576	printf "\n\n *** tar of makefile and source files in depository ..."
	577	cd $local_depository_path
	578	chmod u+w Makefile *.$suf
	579	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	580	printf "\n"
	581
	582
	583
	584	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	585	if [[ $host = all ]]
	586	then
	587	printf "\n *** updates will be made for ALL hosts found in"
	588	printf "\n the configuration file"
	589	else
	590	printf "\n *** update will be made for host \"$host\" "
	591	fi
	592
	593	if [[ $silent = false ]]
	594	then
	595	answer=dummy
	596	printf "\n\n"
	597	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	598	do
	599	printf " >>> continue (y/n) ? "
	600	read answer
	601	done
	602	if [[ $answer = n \|\| $answer = N ]]
	603	then
	604	locat=user_abort; exit
	605	fi
	606	fi
	607
	608
	609
	610
	611	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	612	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	613	printf "\n *** scanning configuration file for host(s) ..."
	614
	615	grep %fopts $config_file \| while read line
	616	do
	617	# KOMMENTARZEILEN UEBERSPRINGEN
	618	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	619	(( ihost = ihost + 1 ))
	620	hostline[$ihost]="$line"
	621	done
	622
	623
	624	while (( ih < ihost ))
	625	do
	626
	627	(( ih = ih + 1 ))
	628
	629	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	630	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	631	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	632	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	633	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	634	if [[ $host != all ]]
	635	then
	636	[[ $remote_host != $host ]] && continue
	637	fi
	638	host_found=true
	639	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	640	if [[ $condition1 = $remote_host ]]
	641	then
	642	condition1=""
	643	else
	644	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	645	fi
	646
	647
	648	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	649	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	650	then
	651	if [[ $ibm_hb_done = true ]]
	652	then
	653	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	654	printf "\n been carried out on one of the HLRN machines\n"
	655	continue
	656	fi
	657	fi
	658
	659	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	660	if [[ $remote_host = lcmuk ]]
	661	then
	662	if [[ $lcmuk_done = true ]]
	663	then
	664	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	665	printf "\n been carried out on this host\n"
	666	continue
	667	fi
	668	fi
	669
	670
	671	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	672	netcdf_support=false
	673	case $remote_host in
	674	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
	675	netcdf_support=true
	676	if [[ $scirocco = true ]]
	677	then
	678	netcdf_path=/opt/netcdf/3.6.2-beta4
	679	else
	680	netcdf_path=/muksoft/packages/netcdf/linux
	681	fi;;
	682	(lctit) remote_addres=172.17.75.161; netcdf_support=true
	683	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
	684	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
	685	netcdf_path=/usr/local/netcdf-3.5.1;;
	686	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
	687	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	688	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
	689	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	690	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
	691	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	692	netcdf_path=/applic/lib/NETCDF64;;
	693	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	694	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
	695	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
	696	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
	697	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
	698	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
	699	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
	700	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
	701	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
	702	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
	703	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	704	(*) printf "\n +++ remote host \"$remote_host\" unknown";
	705	printf "\n please inform S. Raasch!";
	706	locat=config_file; exit;;
	707	esac
	708
	709
	710	# REMOTE-USERNAMEN ERMITTELN
	711	line=""
	712	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
	713	do
	714	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	715	then
	716	line="$line1"
	717	fi
	718	done
	719
	720	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	721	then
	722	printf "\n +++ no remote username found in configuration file"
	723	printf "\n for \"$remote_host_string\" "
	724	locat=config_file; exit
	725	else
	726	remote_username=`echo $line \| cut -d" " -s -f2`
	727	fi
	728
	729
	730	# REMOTE-QUELLTEXTPFAD ERMITTELN
	731	line=""
	732	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
	733	do
	734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	735	then
	736	line="$line1"
	737	fi
	738	done
	739
	740	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	741	then
	742	remote_source_path=`echo $line \| cut -d" " -s -f2`
	743	fi
	744	if [[ "$remote_source_path" = "" ]]
	745	then
	746	if [[ "$global_source_path" != "" ]]
	747	then
	748	remote_source_path=$global_source_path
	749	else
	750	printf "\n +++ no source path found in configuration file"
	751	printf "\n for \"$remote_host_string\" "
	752	locat=config_file; exit
	753	fi
	754	fi
	755
	756
	757	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
	758	line=""
	759	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
	760	do
	761	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	762	then
	763	line="$line1"
	764	fi
	765	done
	766
	767	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	768	then
	769	remote_md=`echo $line \| cut -d" " -s -f2`
	770	fi
	771	if [[ "$remote_md" = "" ]]
	772	then
	773	if [[ "$global_depository_path" != "" ]]
	774	then
	775	remote_md=$global_depository_path
	776	else
	777	printf "\n +++ no depository path found in configuration file"
	778	printf "\n for \"$remote_host_string\" "
	779	printf "\n please set \"\%depository_path\" in configuration file"
	780	locat=config_file; exit
	781	fi
	782	fi
	783
[8]	784	remote_md=$(eval echo $remote_md)
[1]	785
[8]	786
[1]	787	# COMPILERNAMEN ERMITTELN
	788	line=""
	789	grep "$remote_host_string" $config_file \| grep "%compiler_name" \| while read line1
	790	do
	791	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	792	then
	793	line="$line1"
	794	fi
	795	done
	796
	797	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	798	then
	799	printf "\n +++ no compiler name found in configuration file"
	800	printf "\n for \"$remote_host_string\" "
	801	locat=config_file; exit
	802	else
	803	compiler_name=`echo $line \| cut -d" " -s -f2`
	804	fi
	805
	806
	807
	808	# PRAEPROZESSOR-DIREKTIVEN SETZEN
	809	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	810	then
	811	if [[ $remote_host = ibms ]]
	812	then
	813	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
	814	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
	815	else
	816	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
	817	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
	818	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
	819	fi
	820	elif [[ $remote_host = lcmuk ]]
	821	then
	822	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	823	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
	824	elif [[ $remote_host = lctit ]]
	825	then
	826	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	827	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
	828	elif [[ $remote_host = decalpha ]]
	829	then
	830	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	831	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
	832	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
	833	then
	834	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
	835	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
	836	fi
	837
	838	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	839	then
	840	for string in $remote_host_string
	841	do
	842	if [[ $(echo $string \| cut -c1-3) = ibm ]]
	843	then
	844	cpp_options="${cpp_options},-D__ibm"
	845	if [[ $remote_host = ibmy ]]
	846	then
	847	cpp_options="${cpp_options},-D__ibmy_special"
	848	fi
	849	else
	850	cpp_options="${cpp_options},-D__$string"
	851	fi
	852	done
	853	cpp_options="$cpp_options "
	854	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
	855	then
	856	for string in $remote_host_string
	857	do
	858	if [[ $(echo $string \| cut -c1-3) = nec ]]
	859	then
	860	cpp_options="${cpp_options} -D__nec"
	861	else
	862	cpp_options="${cpp_options} -D__$string"
	863	fi
	864	done
	865	cpp_options="$cpp_options "
	866	else
	867	for string in $remote_host_string
	868	do
	869	cpp_options="$cpp_options -D__$string "
	870	done
	871	fi
	872
	873
	874	# COMPILEROPTIONEN ERMITTELN
	875	line=""
	876	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
	877	do
	878	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	879	then
	880	line="$line1"
	881	fi
	882	done
	883	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	884	then
	885	printf "\n +++ no compiler options found in configuration file"
	886	printf "\n for \"$remote_host_string\" "
	887	locat=config_file; exit
	888	else
	889	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	890	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	891	fi
	892	if [[ $netcdf_support = true ]]
	893	then
	894	case $remote_host in
	895	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
	896	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
	897	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
	898	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	899	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	900	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
	901	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	902	esac
	903	fi
	904
	905
	906
	907	# LADER-OPTIONEN ERMITTELN
	908	line=""
	909	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
	910	do
	911	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	912	then
	913	line="$line1"
	914	fi
	915	done
	916
	917	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	918	then
	919	printf "\n +++ no loader options found in configuration file"
	920	printf "\n for \"$remote_host_string\" "
	921	locat=config_file; exit
	922	else
	923	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	924	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	925	fi
	926	if [[ $netcdf_support = true ]]
	927	then
	928	case $remote_host in
	929	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	930	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	931	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
	932	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	933	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
	934	esac
	935	fi
	936
	937
	938	printf "\n\n#------------------------------------------------------------------------# \n"
	939	if [[ $remote_host = $local_host ]]
	940	then
	941	column1="remote_host:"; column2="$remote_host (= local host!)"
	942	else
	943	column1="remote_host:"; column2=$remote_host
	944	fi
	945	printf "\| $column1$column2 \| \n"
	946	printf "\| \| \n"
	947	column1="conditions:"; column2="$condition1 $condition2"
	948	printf "\| $column1$column2 \| \n"
	949	column1="make depository:"; column2=$remote_md
	950	printf "\| $column1$column2 \| \n"
	951	column1="username:"; column2=$remote_username
	952	printf "\| $column1$column2 \| \n"
	953	column1="addres:"; column2=$remote_addres
	954	printf "\| $column1$column2 \| \n"
	955	column1="compiler:"; column2=$compiler_name
	956	printf "\| $column1$column2 \| \n"
	957	column1="cpp options:"; column2=$cpp_options
	958	printf "\| $column1$column2 \| \n"
	959	line=$(echo "$cpp_options" \| cut -c51-)
	960	while [[ "$line" != "" ]]
	961	do
	962	column1=""
	963	column2=$line
	964	printf "\| $column1$column2 \| \n"
	965	line=$(echo "$line" \| cut -c51-)
	966	done
	967	column1="compiler options:"; column2=$compiler_options
	968	printf "\| $column1$column2 \| \n"
	969	line=$(echo "$compiler_options" \| cut -c51-)
	970	while [[ "$line" != "" ]]
	971	do
	972	column1=""
	973	column2=$line
	974	printf "\| $column1$column2 \| \n"
	975	line=$(echo "$line" \| cut -c51-)
	976	done
	977	column1="loader options:"; column2=$loader_options
	978	printf "\| $column1$column2 \| \n"
	979	line=$(echo "$loader_options" \| cut -c51-)
	980	while [[ "$line" != "" ]]
	981	do
	982	column1=""
	983	column2=$line
	984	printf "\| $column1$column2 \| \n"
	985	line=$(echo "$line" \| cut -c51-)
	986	done
	987	printf "#------------------------------------------------------------------------# \n"
	988
	989	if [[ $silent = false ]]
	990	then
	991	answer=dummy
	992	printf "\n\n"
	993	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	994	do
	995	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	996	read answer
	997	done
	998	if [[ $answer = a \|\| $answer = A ]]
	999	then
	1000	locat=user_abort; exit
	1001	fi
	1002	if [[ $answer = c \|\| $answer = C ]]
	1003	then
	1004	silent=false
	1005	fi
	1006	if [[ $answer = s \|\| $answer = S ]]
	1007	then
	1008	continue
	1009	fi
	1010	fi
	1011
	1012
	1013	if [[ $remote_mode = batch ]]
	1014	then
	1015
	1016	# BATCH-JOB PARAMETER SETZEN
	1017	case $remote_host in
	1018	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	1019	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	1020	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	1021	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	1022	esac
	1023
	1024
	1025	# BATCH-JOB ZUSAMMENSTELLEN
	1026	printf "\n *** creating batch-job for remote host"
	1027	echo " " > mbuild_job
	1028
	1029	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	1030	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	1031	if [[ $remote_host = t3ej2 ]]
	1032	then
	1033	echo "set +vx" >> mbuild_job
	1034	echo ". .profile" >> mbuild_job
	1035	echo "set -x" >> mbuild_job
	1036	fi
	1037
	1038	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	1039	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	1040	then
	1041	echo "module list" >> mbuild_job
	1042	fi
	1043
	1044
	1045	# WECHSEL IN TEMPORAERES VERZEICHNIS
	1046	echo "cd ${remote_md}" >> mbuild_job
	1047
	1048
	1049	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1050	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	1051	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	1052
	1053
	1054	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1055	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	1056
	1057
	1058	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1059	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	1060
	1061
	1062	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1063	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	1064	echo "chmod u+w *" >> mbuild_job
	1065
	1066	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1067	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	1068
	1069
	1070	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1071	echo "make clean" >> mbuild_job
	1072	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	1073	echo "rm *.f90 Makefile" >> mbuild_job
	1074
	1075
	1076
	1077	# JOB MITTELS SUBJOB STARTEN
	1078	printf "\n *** sending batch job to remote host"
	1079	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1080
	1081
	1082	# JOBFILE LOESCHEN
	1083	# rm aljob
	1084
	1085	else
	1086
	1087	if [[ $remote_host != $local_host ]]
	1088	then
	1089
	1090	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1091	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1092	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1093	if [[ $remote_host != lctit ]]
	1094	then
	1095	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1096	else
	1097	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1098	# MIT SSH, DESHALB AUFRUF PER PIPE
	1099	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1100	fi
	1101	if [[ $local_host = decalpha ]]
	1102	then
	1103	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1104	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1105	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1106	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1107	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1108	else
	1109	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1110	fi
	1111
	1112
	1113
	1114	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1115	echo " *** untar previous update on remote host, if existing"
	1116	if [[ $remote_host != lctit ]]
	1117	then
	1118	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1119	else
	1120	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1121	# MIT SSH, DESHALB AUFRUF PER PIPE
	1122	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1123	fi
	1124
	1125
	1126	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1127	echo " *** untar actual sources on remote host"
	1128	if [[ $remote_host != lctit ]]
	1129	then
	1130	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1131	else
	1132	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1133	# MIT SSH, DESHALB AUFRUF PER PIPE
	1134	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1135	fi
	1136
	1137
	1138	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1139	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1140	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1141	# Z.B. DIE PFADE ZUM COMPILER)
	1142	echo " *** execute \"make\" on remote host"
	1143
	1144	if [[ $remote_host = nech ]]
	1145	then
	1146	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1147	else
	1148	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1149	fi
	1150
	1151	if [[ $remote_host = t3eh ]]
	1152	then
	1153
	1154	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1155
	1156	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1157	then
	1158
	1159	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1160
	1161	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1162	then
	1163
	1164	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1165
	1166	elif [[ $remote_host = lctit ]]
	1167	then
	1168
	1169	echo " " > ${remote_host}_last_make_protokoll
	1170	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1171	do
	1172	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1173	done
	1174
	1175	else
	1176
	1177	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1178
	1179	fi
	1180
	1181	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1182	then
	1183	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1184	if [[ $silent = false ]]
	1185	then
	1186	answer=dummy
	1187	printf "\n"
	1188	while [[ "$answer" != c && "$answer" != k ]]
	1189	do
	1190	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1191	read answer
	1192	if [[ "$answer" = l ]]
	1193	then
	1194	more ${remote_host}_last_make_protokoll
	1195	fi
	1196	done
	1197	if [[ $answer = k ]]
	1198	then
	1199	locat=user_abort; exit
	1200	fi
	1201	fi
	1202	fi
	1203
	1204
	1205
	1206	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1207	printf "\n *** tar update on remote host ..."
	1208	if [[ $remote_host != lctit ]]
	1209	then
	1210	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
	1211	else
	1212	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1213	# MIT SSH, DESHALB AUFRUF PER PIPE
	1214	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1215	fi
	1216
	1217
	1218	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1219	# printf "\n *** \"make clean\" on remote host ..."
	1220	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1221	# printf "\n"
	1222
	1223
	1224	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1225	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1226
	1227	else
	1228
	1229	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1230	echo " *** execute \"make\" on local host"
	1231
	1232	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1233
	1234	if [[ $? != 0 ]]
	1235	then
	1236	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1237	if [[ $silent = false ]]
	1238	then
	1239	answer=dummy
	1240	printf "\n"
	1241	while [[ "$answer" != c && "$answer" != k ]]
	1242	do
	1243	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1244	read answer
	1245	if [[ "$answer" = l ]]
	1246	then
	1247	more ${remote_host}_last_make_protokoll
	1248	fi
	1249	done
	1250	if [[ $answer = k ]]
	1251	then
	1252	locat=user_abort; exit
	1253	fi
	1254	fi
	1255	fi
	1256
	1257
	1258	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1259	printf "\n *** tar update on local host ..."
	1260	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
	1261
	1262	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1263	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1264
	1265	fi
	1266
	1267	fi
	1268	done
	1269
	1270
	1271	if [[ $host_found = false ]]
	1272	then
	1273	if [[ $host = all ]]
	1274	then
	1275	printf "\n +++ no hosts found in configuration file"
	1276	else
	1277	printf "\n +++ host \"$host\" not found in configuration file"
	1278	fi
	1279	locat=config_file; exit
	1280	fi
	1281
	1282
	1283
	1284	# ABSCHLIESSENDE ARBEITEN
	1285	rm -f hosts_found_in_config_file
	1286

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |