Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 52

Last change on this file since 52 was 40, checked in by raasch, 18 years ago
documentation update for the new svn-based version and for 3.1c, update of .mrun.config.default, -u in mbuild only compiles scripts
File size: 54.6 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 02/03/07
3
4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6	# Rechner
7
8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9	# verwendet wird:
10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11	# nach aussen weitergegeben. "while read line" funktioniert nicht
12	# innerhalb einer Pipe.
13
14	# letzte Aenderung:
15	# 06/05/02 - Siggi - Beginn der Entwicklung
16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
20	# benutzt wird
21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22	# 19/12/02 - Siggi - ibmb validiert
23	# 05/02/03 - Siggi - hostname nobela included
24	# 04/03/03 - Siggi - host nech included
25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
26	# file LAST_MAKE_CALL (otherwise error on NEC, because
27	# '' are part of compiler options
28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
29	# string, in case that palm.f90 version contains
30	# such strings
31	# 16/04/03 - Siggi - First extensions for linux machines
32	# 24/06/03 - Siggi - host orkan included
33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34	# 24/07/03 - Siggi - host maestro admitted
35	# 06/08/03 - Siggi - host gregale admitted
36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
39	# (-D$OMP=OMP) in order to avoid problems with
40	# OMP_NUM_THREADS
41	# 09/01/04 - Siggi - action above cancelled
42	# 28/01/04 - Siggi - action above re-cancelled
43	# 08/03/04 - Siggi - host scirocco admitted
44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45	# the respective .f90 file is not listed in the makefile
46	# and deletion is demanded by the user
47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48	# due to error in ssh installation (otherwise a prompt
49	# for the password appears)
50	# 23/07/04 - Siggi - changes due to the new berni configuration
51	# (federation switch)
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
56	# 24/04/05 - Siggi - netcdf support on lcmuk
57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58	# 12/05/05 - Siggi - netcdf support on ibm
59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
60	# 18/05/05 - Siggi - netcdf support on nec
61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62	# 23/05/05 - Siggi - netcdf support on ibms
63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64	# 30/06/05 - Siggi - netcdf support on bora
65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68	# host gfdl5 (ibmy) admitted
69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70	# 20/01/06 - Siggi - cpp directive for ibmy
71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72	# 10/02/06 - Siggi - modifications for scp on decalpha
73	# 13/04/06 - Siggi - ostria admitted
74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76	# 29/05/05 - Siggi - atmos (lcide) admitted
77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78	# 24/11/06 - Siggi - breva and levanto admitted
79	# 07/02/07 - Siggi - adapted for RIAM (neck)
80	# 10/02/07 - Siggi - all hpmuk-related code removed
81	# 02/03/07 - Siggi - compilation of utility programs and transfer of
82	# scripts to remote hosts added (option -u)
83
84
85
86	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
87	compile_utility_programs=false
88	config_file=.mrun.config
89	host=all
90	host_found=false
91	ibm_hb_done=false
92	lcmuk_done=false
93	locat=normal
94	makefile=""
95	remote_mode=interactive
96	scirocco=false
97	silent=false
98	suf=f90
99	update=false
100
101	typeset -i ih ihost=0
102
103	typeset -R50 calltime
104	typeset -L20 column1
105	typeset -L50 column2
106	typeset -L70 column3
107	typeset -L20 version="MBUILD 1.0"
108
109	# FEHLERBEHANDLUNG
110	# BEI EXIT:
111	trap 'if [[ $locat != normal ]]
112	then
113	printf "\n\n +++ mbuild killed \n\n"
114	else
115	printf "\n\n *** mbuild finished \n\n"
116	fi' exit
117
118
119	# BEI TERMINAL-BREAK:
120	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
121	exit
122	' 2
123
124
125
126	# SHELLSCRIPT-OPTIONEN EINLESEN
127	while getopts :c:h:m:rs:u option
128	do
129	case $option in
130	(c) config_file=$OPTARG;;
131	(h) host=$OPTARG;;
132	(m) makefile=$OPTARG;;
133	(r) remote_mode=batch;;
134	(s) suf=$OPTARG;;
135	(u) compile_utility_programs=true;;
136	(\?) printf "\n +++ unknown option $OPTARG \n";
137	locat=parameter; exit;;
138	esac
139	done
140
141
142
143	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
144	if [[ $remote_mode = batch ]]
145	then
146	printf "\n +++ sorry, batch mode does not work! \n"
147	locat=parameter; exit
148	fi
149
150
151
152	# LOKALEN RECHNER ERMITTELN
153	local_host_real_name=$(hostname)
154	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
155	case $local_host_real_name in
156	(atmos) local_host=lcide;;
157	(berte) local_host=t3eb;;
158	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
159	(gate) local_host=neck;;
160	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
161	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
162	(gwdk081.gwdg.de) local_host=ibm;;
163	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
164	(nobel\|nobela) local_host=ibms;;
165	(tgg*) local_host=lctit;;
166	(t3e) local_host=t3eh;;
167	(zam003) local_host=t3ej2;;
168	(zam005) local_host=t3ej5;;
169	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
170	locat=local_host; exit;;
171	esac
172
173	[[ $local_host_real_name = scirocco ]] && scirocco=true
174
175
176
177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178	if [[ ! -f $config_file ]]
179	then
180	printf "\n +++ configuration file: "
181	printf "\n $config_file"
182	printf "\n does not exist"
183	locat=configuration; exit
184	fi
185	if [[ $local_host != ibms ]]
186	then
187	config_file=$PWD/$config_file
188	else
189	config_file=`pwd`/$config_file
190	fi
191
192
193
194	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
195	line=""
196	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
197	do
198	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
199	then
200	local_username=`echo $line \| cut -d" " -s -f2`
201	fi
202	done
203
204	if [[ "$local_username" = "" ]]
205	then
206	printf "\n +++ no user name found in configuration file"
207	printf "\n for local host \"$local_host\" "
208	locat=config_file; exit
209	fi
210
211
212	# LOKALEN QUELLTEXTPFAD ERMITTELN.
213	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
214	# VEREINBART WURDE.
215	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
216	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
217	line=""
218	grep "%" $config_file \| while read line
219	do
220	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
221	then
222	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
223	value=`echo $line \| cut -d" " -s -f2`
224	eval export $var=\$value
225	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
226	fi
227	done
228
229	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
230	line=""
231	grep "%source_path" $config_file \| while read line
232	do
233	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
234	then
235	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
236	then
237	global_source_path=`echo $line \| cut -d" " -s -f2`
238	fi
239	fi
240	done
241
242	line=""
243	grep " $local_host" $config_file \| grep "%source_path" \| while read line
244	do
245	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
246	then
247	local_source_path=`echo $line \| cut -d" " -s -f2`
248	fi
249	done
250
251	if [[ "$local_source_path" = "" ]]
252	then
253	if [[ "$global_source_path" != "" ]]
254	then
255	local_source_path=$global_source_path
256	else
257	printf "\n +++ no source path found in configuration file"
258	printf "\n for local host \"$local_host\" "
259	printf "\n please set \"\%source_path\" in configuration file"
260	locat=config_file; exit
261	fi
262	fi
263	eval local_source_path=$local_source_path
264	eval local_source_path=$local_source_path
265
266
267	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
268	line=""
269	grep "%depository_path" $config_file \| while read line
270	do
271	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
272	then
273	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
274	then
275	global_depository_path=`echo $line \| cut -d" " -s -f2`
276	fi
277	fi
278	done
279
280	line=""
281	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
282	do
283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
284	then
285	local_depository_path=`echo $line \| cut -d" " -s -f2`
286	fi
287	done
288
289	if [[ "$local_depository_path" = "" ]]
290	then
291	if [[ "$global_depository_path" != "" ]]
292	then
293	local_depository_path=$global_depository_path
294	else
295	printf "\n +++ no depository path found in configuration file"
296	printf "\n for local host \"$local_host\" "
297	printf "\n please set \"\%depository_path\" in configuration file"
298	locat=config_file; exit
299	fi
300	fi
301	eval local_depository_path=$local_depository_path
302	eval local_depository_path=$local_depository_path
303
304
305
306	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
307	# VEREINBART WURDE
308	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
309	then
310	printf "\n +++ no main program or more than one main program defined"
311	printf "\n in configuration file"
312	locat=configuration; exit
313	else
314	line=`grep "%mainprog" $config_file`
315	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
316	then
317	printf "\n +++ no main program defined in configuration file"
318	locat=configuration; exit
319	fi
320	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
321	fi
322
323
324
325	# MAKEFILE vorhanden
326	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
327	if [[ ! -f $makefile ]]
328	then
329	printf "\n +++ makefile: "
330	printf "\n $makefile"
331	printf "\n does not exist"
332	locat=makefile; exit
333	fi
334
335
336	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
337	calltime=$(date)
338	printf "\n"
339	printf "#------------------------------------------------------------------------# \n"
340	printf "\| $version$calltime \| \n"
341	printf "\| \| \n"
342	column1="called on:"; column2=$local_host_real_name
343	printf "\| $column1$column2 \| \n"
344	column1="local username:"; column2=$local_username
345	printf "\| $column1$column2 \| \n"
346	column1="local IP-addres:"; column2=$local_addres
347	printf "\| $column1$column2 \| \n"
348	column1="config file:"; column2=$config_file
349	printf "\| $column1$column2 \| \n"
350	column1="makefile:"; column2=$makefile
351	printf "\| $column1$column2 \| \n"
352	column1="local source path:"; column2=$local_source_path
353	printf "\| $column1$column2 \| \n"
354	column1="make depository:"; column2=$local_depository_path
355	printf "\| $column1$column2 \| \n"
356	printf "#------------------------------------------------------------------------# \n"
357
358	# printf "\| \| \n"
359
360
361	if [[ $compile_utility_programs = false ]]
362	then
363
364	cd $local_source_path
365
366
367	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
368	source_code_files=`ls -1 *.$suf`
369
370
371
372	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
373	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
374	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
375	if [[ ! -d $local_depository_path ]]
376	then
377	if mkdir $local_depository_path
378	then
379	printf "\n\n *** directory for make depository:"
380	printf "\n $local_depository_path"
381	printf "\n was created\n"
382
383	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
384	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
385	printf "\n *** makefile and source code files are copied to"
386	printf "\n $local_depository_path\n"
387	printf "\n copying makefile \"$makefile\" ..."
388	cp -p $makefile $local_depository_path/Makefile
389
390	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
391	# SEIN
392	for filename in $source_code_files
393	do
394	if [[ $(grep -c $filename $makefile) = 0 ]]
395	then
396	printf "\n +++ source code file:"
397	printf "\n $filename"
398	printf "\n is not listed in makefile"
399	locat=makefile; exit
400	else
401	printf "\n copying source code file \"$filename\" ..."
402	cp -p $filename $local_depository_path
403	fi
404	done
405	printf "\n"
406	else
407	printf "\n +++ directory for make depository:"
408	printf "\n $local_depository_path"
409	printf "\n cannot be created"
410	locat=local_depository_path; exit
411	fi
412	else
413
414	printf "\n *** checking file status ..."
415
416	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
417	if [[ $makefile -nt $local_depository_path/Makefile ]]
418	then
419	printf "\n *** update of \"$makefile\" "
420	cp -f -p $makefile $local_depository_path/Makefile
421	update=true
422
423	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
424	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
425	cd $local_depository_path
426	source_code_files_in_depository=`ls -1 *.$suf`
427	for filename in $source_code_files_in_depository
428	do
429	if [[ $(grep -c $filename Makefile) = 0 ]]
430	then
431	printf "\n *** source code file in \"$local_depository_path\":"
432	printf "\n $filename"
433	printf "\n is not listed in makefile"
434	if [[ $silent = false ]]
435	then
436	answer=dummy
437	printf "\n\n"
438	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
439	do
440	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
441	read answer
442	done
443	if [[ $answer = y \|\| $answer = Y ]]
444	then
445	base=`echo $filename \| cut -d. -f2`
446	rm -f $filename
447	rm -f ${base}.o ${base}.mod
448	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
449	else
450	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
451	fi
452	fi
453	fi
454	done
455	cd - > /dev/null 2>&1
456
457	elif [[ $local_depository_path/Makefile -nt $makefile ]]
458	then
459	printf "\n *** makefile in depository is newer than"
460	printf "\n \"$makefile\" "
461	if [[ $silent = false ]]
462	then
463	answer=dummy
464	printf "\n\n"
465	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
466	do
467	printf " >>> update \"$makefile\" (y/n) ? "
468	read answer
469	done
470	if [[ $answer = y \|\| $answer = Y ]]
471	then
472	cp -f -p $local_depository_path/Makefile $makefile
473	printf "\n *** \"$makefile\" updated"
474	else
475	printf "\n *** \"$makefile\" not updated"
476	fi
477	fi
478	fi
479
480	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
481	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
482	for filename in $source_code_files
483	do
484	if [[ $(grep -c $filename $makefile) = 0 ]]
485	then
486	printf "\n +++ source code file:"
487	printf "\n $filename"
488	printf "\n is not listed in makefile"
489	locat=makefile; exit
490	else
491	if [[ ! -f $local_depository_path/$filename ]]
492	then
493	cp -p $filename $local_depository_path
494	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
495	fi
496	if [[ $filename -nt $local_depository_path/$filename ]]
497	then
498	printf "\n *** update of source code file \"$filename\" "
499	cp -f -p $filename $local_depository_path
500	update=true
501	fi
502	fi
503	done
504
505
506	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
507	# ODER EVTL. NEUEREN DATUMS SIND
508	cd $local_depository_path
509	source_code_files_in_depository=`ls -1 *.$suf`
510	cd - > /dev/null 2>&1
511	for filename in $source_code_files_in_depository
512	do
513	if [[ ! -f $filename ]]
514	then
515	printf "\n *** source code file \"$filename\" does not exist in current directory"
516	if [[ $silent = false ]]
517	then
518	answer=dummy
519	printf "\n\n"
520	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
521	do
522	printf " >>> create \"$filename\" in current directory (y/n) ? "
523	read answer
524	done
525	if [[ $answer = y \|\| $answer = Y ]]
526	then
527	cp -p $local_depository_path/$filename $filename
528	printf "\n *** source code file \"$filename\" created in current directory"
529	else
530	printf "\n *** source code file \"$filename\" not created in current directory"
531	fi
532	fi
533	elif [[ $local_depository_path/$filename -nt $filename ]]
534	then
535	ls -al $local_depository_path/$filename
536	ls -al $filename
537	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
538	if [[ $silent = false ]]
539	then
540	answer=dummy
541	printf "\n\n"
542	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
543	do
544	printf " >>> update \"$filename\" in current directory (y/n) ? "
545	read answer
546	done
547	if [[ $answer = y \|\| $answer = Y ]]
548	then
549	cp -f -p $local_depository_path/$filename $filename
550	printf "\n *** source code file \"$filename\" updated in current directory"
551	else
552	printf "\n *** source code file \"$filename\" not updated in current directory"
553	fi
554	fi
555	fi
556	done
557
558	if [[ $update = false ]]
559	then
560	printf "\n *** no updates necessary in \"$local_depository_path\" "
561	if [[ $silent = false ]]
562	then
563	answer=dummy
564	printf "\n\n"
565	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
566	do
567	printf " >>> continue with updates on remote hosts (y/n) ? "
568	read answer
569	done
570	if [[ $answer = n \|\| $answer = N ]]
571	then
572	locat=user_abort; exit
573	fi
574	fi
575	fi
576	fi
577
578
579
580	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
581	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
582	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
583	printf "\n\n *** tar of makefile and source files in depository ..."
584	cd $local_depository_path
585	chmod u+w Makefile *.$suf
586	tar -cf ${mainprog}_sources.tar Makefile *.$suf
587	printf "\n"
588
589	fi
590
591
592
593	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
594	if [[ $host = all ]]
595	then
596	printf "\n *** updates will be made for ALL hosts found in"
597	printf "\n the configuration file"
598	else
599	printf "\n *** update will be made for host \"$host\" "
600	fi
601
602	if [[ $silent = false ]]
603	then
604	answer=dummy
605	printf "\n\n"
606	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
607	do
608	printf " >>> continue (y/n) ? "
609	read answer
610	done
611	if [[ $answer = n \|\| $answer = N ]]
612	then
613	locat=user_abort; exit
614	fi
615	fi
616
617
618
619
620	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
621	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
622	printf "\n *** scanning configuration file for host(s) ..."
623
624	grep %fopts $config_file \| while read line
625	do
626	# KOMMENTARZEILEN UEBERSPRINGEN
627	[[ $(echo $line \| cut -c1) = "#" ]] && continue
628	(( ihost = ihost + 1 ))
629	hostline[$ihost]="$line"
630	done
631
632
633	while (( ih < ihost ))
634	do
635
636	(( ih = ih + 1 ))
637
638	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
639	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
640	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
641	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
642	remote_host=`echo $remote_host_string \| cut -d" " -f1`
643	if [[ $host != all ]]
644	then
645	[[ $remote_host != $host ]] && continue
646	fi
647	host_found=true
648	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
649	if [[ $condition1 = $remote_host ]]
650	then
651	condition1=""
652	else
653	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
654	fi
655
656
657	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
658	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
659	then
660	if [[ $ibm_hb_done = true ]]
661	then
662	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
663	printf "\n been carried out on one of the HLRN machines\n"
664	continue
665	fi
666	fi
667
668	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
669	if [[ $remote_host = lcmuk ]]
670	then
671	if [[ $lcmuk_done = true ]]
672	then
673	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
674	printf "\n been carried out on this host\n"
675	continue
676	fi
677	fi
678
679
680	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
681	netcdf_support=false
682	case $remote_host in
683	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
684	netcdf_support=true
685	if [[ $scirocco = true ]]
686	then
687	netcdf_path=/opt/netcdf/3.6.2-beta4
688	else
689	netcdf_path=/muksoft/packages/netcdf/linux
690	fi;;
691	(lctit) remote_addres=172.17.75.161; netcdf_support=true
692	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
693	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
694	netcdf_path=/usr/local/netcdf-3.5.1;;
695	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
696	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
697	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
698	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
699	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
700	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
701	netcdf_path=/applic/lib/NETCDF64;;
702	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
703	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
704	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
705	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
706	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
707	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
708	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
709	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
710	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
711	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
712	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
713	(*) printf "\n +++ remote host \"$remote_host\" unknown";
714	printf "\n please inform S. Raasch!";
715	locat=config_file; exit;;
716	esac
717
718
719	# REMOTE-USERNAMEN ERMITTELN
720	line=""
721	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
722	do
723	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
724	then
725	line="$line1"
726	fi
727	done
728
729	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
730	then
731	printf "\n +++ no remote username found in configuration file"
732	printf "\n for \"$remote_host_string\" "
733	locat=config_file; exit
734	else
735	remote_username=`echo $line \| cut -d" " -s -f2`
736	fi
737
738
739	# REMOTE-QUELLTEXTPFAD ERMITTELN
740	line=""
741	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
742	do
743	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
744	then
745	line="$line1"
746	fi
747	done
748
749	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
750	then
751	remote_source_path=`echo $line \| cut -d" " -s -f2`
752	fi
753	if [[ "$remote_source_path" = "" ]]
754	then
755	if [[ "$global_source_path" != "" ]]
756	then
757	remote_source_path=$global_source_path
758	else
759	printf "\n +++ no source path found in configuration file"
760	printf "\n for \"$remote_host_string\" "
761	locat=config_file; exit
762	fi
763	fi
764
765	remote_ud=${remote_source_path}/../UTIL
766	remote_ud=$(eval echo $remote_ud)
767
768	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
769	line=""
770	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
771	do
772	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
773	then
774	line="$line1"
775	fi
776	done
777
778	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
779	then
780	remote_md=`echo $line \| cut -d" " -s -f2`
781	fi
782	if [[ "$remote_md" = "" ]]
783	then
784	if [[ "$global_depository_path" != "" ]]
785	then
786	remote_md=$global_depository_path
787	else
788	printf "\n +++ no depository path found in configuration file"
789	printf "\n for \"$remote_host_string\" "
790	printf "\n please set \"\%depository_path\" in configuration file"
791	locat=config_file; exit
792	fi
793	fi
794
795	remote_md=$(eval echo $remote_md)
796
797
798	# COMPILERNAMEN ERMITTELN
799	line=""
800	grep "$remote_host_string" $config_file \| grep "%compiler_name " \| while read line1
801	do
802	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
803	then
804	line="$line1"
805	fi
806	done
807
808	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
809	then
810	printf "\n +++ no compiler name found in configuration file"
811	printf "\n for \"$remote_host_string\" "
812	locat=config_file; exit
813	else
814	compiler_name=`echo $line \| cut -d" " -s -f2`
815	fi
816
817
818	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
819	# SERIELLER COMPILERNAME ERMITTELT WERDEN
820	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
821	then
822	line=""
823	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" \| while read line1
824	do
825	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
826	then
827	line="$line1"
828	fi
829	done
830
831	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
832	then
833	printf "\n +++ no serial compiler name found in configuration file"
834	printf "\n for \"$remote_host_string\" "
835	locat=config_file; exit
836	else
837	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
838	fi
839	else
840	compiler_name_ser=$compiler_name
841	fi
842
843
844
845	# PRAEPROZESSOR-DIREKTIVEN SETZEN
846	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
847	then
848	if [[ $remote_host = ibms ]]
849	then
850	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
851	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
852	else
853	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
854	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
855	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
856	fi
857	elif [[ $remote_host = lcmuk ]]
858	then
859	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
860	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
861	elif [[ $remote_host = lctit ]]
862	then
863	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
864	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
865	elif [[ $remote_host = decalpha ]]
866	then
867	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
868	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
869	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
870	then
871	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
872	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
873	fi
874
875	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
876	then
877	for string in $remote_host_string
878	do
879	if [[ $(echo $string \| cut -c1-3) = ibm ]]
880	then
881	cpp_options="${cpp_options},-D__ibm"
882	if [[ $remote_host = ibmy ]]
883	then
884	cpp_options="${cpp_options},-D__ibmy_special"
885	fi
886	else
887	cpp_options="${cpp_options},-D__$string"
888	fi
889	done
890	cpp_options="$cpp_options "
891	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
892	then
893	for string in $remote_host_string
894	do
895	if [[ $(echo $string \| cut -c1-3) = nec ]]
896	then
897	cpp_options="${cpp_options} -D__nec"
898	else
899	cpp_options="${cpp_options} -D__$string"
900	fi
901	done
902	cpp_options="$cpp_options "
903	else
904	for string in $remote_host_string
905	do
906	cpp_options="$cpp_options -D__$string "
907	done
908	fi
909
910
911	# COMPILEROPTIONEN ERMITTELN
912	line=""
913	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
914	do
915	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
916	then
917	line="$line1"
918	fi
919	done
920	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
921	then
922	printf "\n +++ no compiler options found in configuration file"
923	printf "\n for \"$remote_host_string\" "
924	locat=config_file; exit
925	else
926	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
927	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
928	fi
929	if [[ $netcdf_support = true ]]
930	then
931	case $remote_host in
932	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
933	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
934	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
935	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
936	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
937	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
938	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
939	esac
940	fi
941
942
943
944	# LADER-OPTIONEN ERMITTELN
945	line=""
946	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
947	do
948	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
949	then
950	line="$line1"
951	fi
952	done
953
954	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
955	then
956	printf "\n +++ no loader options found in configuration file"
957	printf "\n for \"$remote_host_string\" "
958	locat=config_file; exit
959	else
960	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
961	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
962	fi
963	if [[ $netcdf_support = true ]]
964	then
965	case $remote_host in
966	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
967	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
968	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
969	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
970	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
971	esac
972	fi
973
974
975	printf "\n\n#------------------------------------------------------------------------# \n"
976	if [[ $remote_host = $local_host ]]
977	then
978	column1="remote_host:"; column2="$remote_host (= local host!)"
979	else
980	column1="remote_host:"; column2=$remote_host
981	fi
982	printf "\| $column1$column2 \| \n"
983	printf "\| \| \n"
984	column1="conditions:"; column2="$condition1 $condition2"
985	printf "\| $column1$column2 \| \n"
986	column1="make depository:"; column2=$remote_md
987	printf "\| $column1$column2 \| \n"
988	if [[ $compile_utility_programs = true ]]
989	then
990	column1="utility directory:"; column2=$remote_ud
991	printf "\| $column1$column2 \| \n"
992	fi
993	column1="username:"; column2=$remote_username
994	printf "\| $column1$column2 \| \n"
995	column1="addres:"; column2=$remote_addres
996	printf "\| $column1$column2 \| \n"
997	column1="compiler:"; column2=$compiler_name
998	printf "\| $column1$column2 \| \n"
999	if [[ $compile_utility_programs = true ]]
1000	then
1001	column1="serial compiler:"; column2=$compiler_name_ser
1002	printf "\| $column1$column2 \| \n"
1003	fi
1004	column1="cpp options:"; column2=$cpp_options
1005	printf "\| $column1$column2 \| \n"
1006	line=$(echo "$cpp_options" \| cut -c51-)
1007	while [[ "$line" != "" ]]
1008	do
1009	column1=""
1010	column2=$line
1011	printf "\| $column1$column2 \| \n"
1012	line=$(echo "$line" \| cut -c51-)
1013	done
1014	column1="compiler options:"; column2=$compiler_options
1015	printf "\| $column1$column2 \| \n"
1016	line=$(echo "$compiler_options" \| cut -c51-)
1017	while [[ "$line" != "" ]]
1018	do
1019	column1=""
1020	column2=$line
1021	printf "\| $column1$column2 \| \n"
1022	line=$(echo "$line" \| cut -c51-)
1023	done
1024	column1="loader options:"; column2=$loader_options
1025	printf "\| $column1$column2 \| \n"
1026	line=$(echo "$loader_options" \| cut -c51-)
1027	while [[ "$line" != "" ]]
1028	do
1029	column1=""
1030	column2=$line
1031	printf "\| $column1$column2 \| \n"
1032	line=$(echo "$line" \| cut -c51-)
1033	done
1034	printf "#------------------------------------------------------------------------# \n"
1035
1036	if [[ $silent = false ]]
1037	then
1038	answer=dummy
1039	printf "\n\n"
1040	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1041	do
1042	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1043	read answer
1044	done
1045	if [[ $answer = a \|\| $answer = A ]]
1046	then
1047	locat=user_abort; exit
1048	fi
1049	if [[ $answer = c \|\| $answer = C ]]
1050	then
1051	silent=false
1052	fi
1053	if [[ $answer = s \|\| $answer = S ]]
1054	then
1055	continue
1056	fi
1057	fi
1058
1059
1060	if [[ $remote_mode = batch ]]
1061	then
1062
1063	# BATCH-JOB PARAMETER SETZEN
1064	case $remote_host in
1065	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1066	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1067	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1068	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1069	esac
1070
1071
1072	# BATCH-JOB ZUSAMMENSTELLEN
1073	printf "\n *** creating batch-job for remote host"
1074	echo " " > mbuild_job
1075
1076	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1077	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1078	if [[ $remote_host = t3ej2 ]]
1079	then
1080	echo "set +vx" >> mbuild_job
1081	echo ". .profile" >> mbuild_job
1082	echo "set -x" >> mbuild_job
1083	fi
1084
1085	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1086	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1087	then
1088	echo "module list" >> mbuild_job
1089	fi
1090
1091
1092	# WECHSEL IN TEMPORAERES VERZEICHNIS
1093	echo "cd ${remote_md}" >> mbuild_job
1094
1095
1096	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1097	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1098	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1099
1100
1101	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1102	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1103
1104
1105	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1106	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1107
1108
1109	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1110	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1111	echo "chmod u+w *" >> mbuild_job
1112
1113	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1114	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1115
1116
1117	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1118	echo "make clean" >> mbuild_job
1119	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1120	echo "rm *.f90 Makefile" >> mbuild_job
1121
1122
1123
1124	# JOB MITTELS SUBJOB STARTEN
1125	printf "\n *** sending batch job to remote host"
1126	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1127
1128
1129	# JOBFILE LOESCHEN
1130	# rm aljob
1131
1132	else
1133
1134	if [[ $remote_host != $local_host ]]
1135	then
1136
1137	if [[ $compile_utility_programs = false ]]
1138	then
1139
1140	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1141	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1142	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1143	if [[ $remote_host != lctit ]]
1144	then
1145	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1146	else
1147	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1148	# MIT SSH, DESHALB AUFRUF PER PIPE
1149	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1150	fi
1151	if [[ $local_host = decalpha ]]
1152	then
1153	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1154	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1155	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1156	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1157	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1158	else
1159	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1160	fi
1161
1162
1163
1164	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1165	echo " *** untar previous update on remote host, if existing"
1166	if [[ $remote_host != lctit ]]
1167	then
1168	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1169	else
1170	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1171	# MIT SSH, DESHALB AUFRUF PER PIPE
1172	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1173	fi
1174
1175
1176	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1177	echo " *** untar actual sources on remote host"
1178	if [[ $remote_host != lctit ]]
1179	then
1180	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1181	else
1182	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1183	# MIT SSH, DESHALB AUFRUF PER PIPE
1184	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1185	fi
1186
1187
1188	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1189	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1190	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1191	# Z.B. DIE PFADE ZUM COMPILER)
1192	echo " *** execute \"make\" on remote host"
1193
1194	if [[ $remote_host = nech ]]
1195	then
1196	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1197	else
1198	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1199	fi
1200
1201	if [[ $remote_host = t3eh ]]
1202	then
1203
1204	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1205
1206	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1207	then
1208
1209	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1210
1211	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1212	then
1213
1214	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1215
1216	elif [[ $remote_host = lctit ]]
1217	then
1218
1219	echo " " > ${remote_host}_last_make_protokoll
1220	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1221	do
1222	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1223	done
1224
1225	else
1226
1227	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1228
1229	fi
1230
1231	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1232	then
1233	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1234	if [[ $silent = false ]]
1235	then
1236	answer=dummy
1237	printf "\n"
1238	while [[ "$answer" != c && "$answer" != k ]]
1239	do
1240	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1241	read answer
1242	if [[ "$answer" = l ]]
1243	then
1244	more ${remote_host}_last_make_protokoll
1245	fi
1246	done
1247	if [[ $answer = k ]]
1248	then
1249	locat=user_abort; exit
1250	fi
1251	fi
1252	fi
1253
1254
1255
1256	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1257	printf "\n *** tar update on remote host ..."
1258	if [[ $remote_host != lctit ]]
1259	then
1260	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1261	else
1262	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1263	# MIT SSH, DESHALB AUFRUF PER PIPE
1264	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1265	fi
1266
1267
1268	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1269	# printf "\n *** \"make clean\" on remote host ..."
1270	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1271	# printf "\n"
1272
1273
1274
1275
1276	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1277	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1278	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1279	elif [[ $compile_utility_programs = true ]]
1280	then
1281
1282	printf "\n\n"
1283	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1284	cd ${local_source_path}/../SCRIPTS
1285
1286	if [[ $remote_host != lctit ]]
1287	then
1288	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1289	else
1290	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1291	# MIT SSH, DESHALB AUFRUF PER PIPE
1292	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1293	fi
1294
1295	# KOPIEREN DER SCRIPTE
1296	if [[ $local_host = decalpha ]]
1297	then
1298	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1299	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1300	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1301	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1302	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1303	else
1304	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1305	fi
1306
1307	cd - > /dev/null
1308	cd ${local_source_path}/../UTIL
1309
1310
1311	# KOPIEREN DER UTILITY-PROGRAMME
1312	if [[ $local_host = decalpha ]]
1313	then
1314	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1315	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1316	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1317	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1318	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1319	else
1320	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1321	fi
1322
1323
1324
1325	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1326	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1327	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1328	# Z.B. DIE PFADE ZUM COMPILER)
1329	echo " *** execute \"make\" on remote host"
1330
1331	if [[ $remote_host = nech ]]
1332	then
1333	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1334	else
1335	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1336	fi
1337
1338	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1339	then
1340
1341	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1342
1343	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1344	then
1345
1346	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1347
1348	elif [[ $remote_host = lctit ]]
1349	then
1350
1351	echo " " > ${remote_host}_last_make_protokoll
1352	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1353	do
1354	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1355	done
1356
1357	else
1358
1359	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1360
1361	fi
1362
1363	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1364
1365
1366	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1367	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1368
1369	else
1370
1371	if [[ $compile_utility_programs = false ]]
1372	then
1373
1374	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1375	echo " "
1376	echo " *** execute \"make\" on local host"
1377
1378	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1379
1380	if [[ $? != 0 ]]
1381	then
1382	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1383	if [[ $silent = false ]]
1384	then
1385	answer=dummy
1386	printf "\n"
1387	while [[ "$answer" != c && "$answer" != k ]]
1388	do
1389	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1390	read answer
1391	if [[ "$answer" = l ]]
1392	then
1393	more ${remote_host}_last_make_protokoll
1394	fi
1395	done
1396	if [[ $answer = k ]]
1397	then
1398	locat=user_abort; exit
1399	fi
1400	fi
1401	fi
1402
1403
1404	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1405	printf "\n *** tar update on local host ..."
1406	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1407
1408
1409	# COMPILE THE UTILITY PROGRAMS
1410	elif [[ $compile_utility_programs = true ]]
1411	then
1412	printf "\n\n"
1413	echo " *** compiling the utility programs ..."
1414	cd ${local_source_path}/../UTIL
1415	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1416	cd - > /dev/null
1417	fi
1418
1419
1420	# NUR EINMAL AUF LCMUK UEBERSETZEN
1421	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1422
1423	fi
1424
1425	fi
1426	done
1427
1428
1429	if [[ $host_found = false ]]
1430	then
1431	if [[ $host = all ]]
1432	then
1433	printf "\n +++ no hosts found in configuration file"
1434	else
1435	printf "\n +++ host \"$host\" not found in configuration file"
1436	fi
1437	locat=config_file; exit
1438	fi
1439
1440
1441
1442	# ABSCHLIESSENDE ARBEITEN
1443	rm -f hosts_found_in_config_file
1444

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |