Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 35

Last change on this file since 35 was 35, checked in by raasch, 18 years ago
small bugfix in mbuild, subjob adjusted for RIAM machines
File size: 53.4 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 28/02/07
3
4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6	# Rechner
7
8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9	# verwendet wird:
10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11	# nach aussen weitergegeben. "while read line" funktioniert nicht
12	# innerhalb einer Pipe.
13
14	# letzte Aenderung:
15	# 06/05/02 - Siggi - Beginn der Entwicklung
16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
20	# benutzt wird
21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22	# 19/12/02 - Siggi - ibmb validiert
23	# 05/02/03 - Siggi - hostname nobela included
24	# 04/03/03 - Siggi - host nech included
25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
26	# file LAST_MAKE_CALL (otherwise error on NEC, because
27	# '' are part of compiler options
28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
29	# string, in case that palm.f90 version contains
30	# such strings
31	# 16/04/03 - Siggi - First extensions for linux machines
32	# 24/06/03 - Siggi - host orkan included
33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34	# 24/07/03 - Siggi - host maestro admitted
35	# 06/08/03 - Siggi - host gregale admitted
36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
39	# (-D$OMP=OMP) in order to avoid problems with
40	# OMP_NUM_THREADS
41	# 09/01/04 - Siggi - action above cancelled
42	# 28/01/04 - Siggi - action above re-cancelled
43	# 08/03/04 - Siggi - host scirocco admitted
44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45	# the respective .f90 file is not listed in the makefile
46	# and deletion is demanded by the user
47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48	# due to error in ssh installation (otherwise a prompt
49	# for the password appears)
50	# 23/07/04 - Siggi - changes due to the new berni configuration
51	# (federation switch)
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
56	# 24/04/05 - Siggi - netcdf support on lcmuk
57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58	# 12/05/05 - Siggi - netcdf support on ibm
59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
60	# 18/05/05 - Siggi - netcdf support on nec
61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62	# 23/05/05 - Siggi - netcdf support on ibms
63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64	# 30/06/05 - Siggi - netcdf support on bora
65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68	# host gfdl5 (ibmy) admitted
69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70	# 20/01/06 - Siggi - cpp directive for ibmy
71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72	# 10/02/06 - Siggi - modifications for scp on decalpha
73	# 13/04/06 - Siggi - ostria admitted
74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76	# 29/05/05 - Siggi - atmos (lcide) admitted
77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78	# 24/11/06 - Siggi - breva and levanto admitted
79	# 07/02/07 - Siggi - adapted for RIAM (neck)
80	# 10/02/07 - Siggi - all hpmuk-related code removed
81	# 28/02/07 - Siggi - compilation of utility programs and transfer of
82	# scripts to remote hosts added (option -u)
83
84
85
86	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
87	compile_utility_programs=false
88	config_file=.mrun.config
89	host=all
90	host_found=false
91	ibm_hb_done=false
92	lcmuk_done=false
93	locat=normal
94	makefile=""
95	remote_mode=interactive
96	scirocco=false
97	silent=false
98	suf=f90
99	update=false
100
101	typeset -i ih ihost=0
102
103	typeset -R50 calltime
104	typeset -L20 column1
105	typeset -L50 column2
106	typeset -L70 column3
107	typeset -L20 version="MBUILD 1.0"
108
109	# FEHLERBEHANDLUNG
110	# BEI EXIT:
111	trap 'if [[ $locat != normal ]]
112	then
113	printf "\n\n +++ mbuild killed \n\n"
114	else
115	printf "\n\n *** mbuild finished \n\n"
116	fi' exit
117
118
119	# BEI TERMINAL-BREAK:
120	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
121	exit
122	' 2
123
124
125
126	# SHELLSCRIPT-OPTIONEN EINLESEN
127	while getopts :c:h:m:rs:u option
128	do
129	case $option in
130	(c) config_file=$OPTARG;;
131	(h) host=$OPTARG;;
132	(m) makefile=$OPTARG;;
133	(r) remote_mode=batch;;
134	(s) suf=$OPTARG;;
135	(u) compile_utility_programs=true;;
136	(\?) printf "\n +++ unknown option $OPTARG \n";
137	locat=parameter; exit;;
138	esac
139	done
140
141
142
143	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
144	if [[ $remote_mode = batch ]]
145	then
146	printf "\n +++ sorry, batch mode does not work! \n"
147	locat=parameter; exit
148	fi
149
150
151
152	# LOKALEN RECHNER ERMITTELN
153	local_host_real_name=$(hostname)
154	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
155	case $local_host_real_name in
156	(atmos) local_host=lcide;;
157	(berte) local_host=t3eb;;
158	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
159	(gate) local_host=neck;;
160	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
161	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
162	(gwdk081.gwdg.de) local_host=ibm;;
163	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
164	(nobel\|nobela) local_host=ibms;;
165	(tgg*) local_host=lctit;;
166	(t3e) local_host=t3eh;;
167	(zam003) local_host=t3ej2;;
168	(zam005) local_host=t3ej5;;
169	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
170	locat=local_host; exit;;
171	esac
172
173	[[ $local_host_real_name = scirocco ]] && scirocco=true
174
175
176
177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178	if [[ ! -f $config_file ]]
179	then
180	printf "\n +++ configuration file: "
181	printf "\n $config_file"
182	printf "\n does not exist"
183	locat=configuration; exit
184	fi
185	if [[ $local_host != ibms ]]
186	then
187	config_file=$PWD/$config_file
188	else
189	config_file=`pwd`/$config_file
190	fi
191
192
193
194	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
195	line=""
196	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
197	do
198	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
199	then
200	local_username=`echo $line \| cut -d" " -s -f2`
201	fi
202	done
203
204	if [[ "$local_username" = "" ]]
205	then
206	printf "\n +++ no user name found in configuration file"
207	printf "\n for local host \"$local_host\" "
208	locat=config_file; exit
209	fi
210
211
212	# LOKALEN QUELLTEXTPFAD ERMITTELN.
213	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
214	# VEREINBART WURDE.
215	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
216	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
217	line=""
218	grep "%" $config_file \| while read line
219	do
220	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
221	then
222	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
223	value=`echo $line \| cut -d" " -s -f2`
224	eval export $var=\$value
225	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
226	fi
227	done
228
229	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
230	line=""
231	grep "%source_path" $config_file \| while read line
232	do
233	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
234	then
235	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
236	then
237	global_source_path=`echo $line \| cut -d" " -s -f2`
238	fi
239	fi
240	done
241
242	line=""
243	grep " $local_host" $config_file \| grep "%source_path" \| while read line
244	do
245	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
246	then
247	local_source_path=`echo $line \| cut -d" " -s -f2`
248	fi
249	done
250
251	if [[ "$local_source_path" = "" ]]
252	then
253	if [[ "$global_source_path" != "" ]]
254	then
255	local_source_path=$global_source_path
256	else
257	printf "\n +++ no source path found in configuration file"
258	printf "\n for local host \"$local_host\" "
259	printf "\n please set \"\%source_path\" in configuration file"
260	locat=config_file; exit
261	fi
262	fi
263	eval local_source_path=$local_source_path
264	eval local_source_path=$local_source_path
265
266
267	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
268	line=""
269	grep "%depository_path" $config_file \| while read line
270	do
271	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
272	then
273	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
274	then
275	global_depository_path=`echo $line \| cut -d" " -s -f2`
276	fi
277	fi
278	done
279
280	line=""
281	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
282	do
283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
284	then
285	local_depository_path=`echo $line \| cut -d" " -s -f2`
286	fi
287	done
288
289	if [[ "$local_depository_path" = "" ]]
290	then
291	if [[ "$global_depository_path" != "" ]]
292	then
293	local_depository_path=$global_depository_path
294	else
295	printf "\n +++ no depository path found in configuration file"
296	printf "\n for local host \"$local_host\" "
297	printf "\n please set \"\%depository_path\" in configuration file"
298	locat=config_file; exit
299	fi
300	fi
301	eval local_depository_path=$local_depository_path
302	eval local_depository_path=$local_depository_path
303
304
305
306	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
307	# VEREINBART WURDE
308	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
309	then
310	printf "\n +++ no main program or more than one main program defined"
311	printf "\n in configuration file"
312	locat=configuration; exit
313	else
314	line=`grep "%mainprog" $config_file`
315	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
316	then
317	printf "\n +++ no main program defined in configuration file"
318	locat=configuration; exit
319	fi
320	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
321	fi
322
323
324
325	# MAKEFILE vorhanden
326	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
327	if [[ ! -f $makefile ]]
328	then
329	printf "\n +++ makefile: "
330	printf "\n $makefile"
331	printf "\n does not exist"
332	locat=makefile; exit
333	fi
334
335
336	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
337	calltime=$(date)
338	printf "\n"
339	printf "#------------------------------------------------------------------------# \n"
340	printf "\| $version$calltime \| \n"
341	printf "\| \| \n"
342	column1="called on:"; column2=$local_host_real_name
343	printf "\| $column1$column2 \| \n"
344	column1="local username:"; column2=$local_username
345	printf "\| $column1$column2 \| \n"
346	column1="local IP-addres:"; column2=$local_addres
347	printf "\| $column1$column2 \| \n"
348	column1="config file:"; column2=$config_file
349	printf "\| $column1$column2 \| \n"
350	column1="makefile:"; column2=$makefile
351	printf "\| $column1$column2 \| \n"
352	column1="local source path:"; column2=$local_source_path
353	printf "\| $column1$column2 \| \n"
354	column1="make depository:"; column2=$local_depository_path
355	printf "\| $column1$column2 \| \n"
356	printf "#------------------------------------------------------------------------# \n"
357
358	# printf "\| \| \n"
359
360
361	cd $local_source_path
362
363
364	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
365	source_code_files=`ls -1 *.$suf`
366
367
368
369	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
370	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
371	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
372	if [[ ! -d $local_depository_path ]]
373	then
374	if mkdir $local_depository_path
375	then
376	printf "\n\n *** directory for make depository:"
377	printf "\n $local_depository_path"
378	printf "\n was created\n"
379
380	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
381	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
382	printf "\n *** makefile and source code files are copied to"
383	printf "\n $local_depository_path\n"
384	printf "\n copying makefile \"$makefile\" ..."
385	cp -p $makefile $local_depository_path/Makefile
386
387	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
388	# SEIN
389	for filename in $source_code_files
390	do
391	if [[ $(grep -c $filename $makefile) = 0 ]]
392	then
393	printf "\n +++ source code file:"
394	printf "\n $filename"
395	printf "\n is not listed in makefile"
396	locat=makefile; exit
397	else
398	printf "\n copying source code file \"$filename\" ..."
399	cp -p $filename $local_depository_path
400	fi
401	done
402	printf "\n"
403	else
404	printf "\n +++ directory for make depository:"
405	printf "\n $local_depository_path"
406	printf "\n cannot be created"
407	locat=local_depository_path; exit
408	fi
409	else
410
411	printf "\n *** checking file status ..."
412
413	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
414	if [[ $makefile -nt $local_depository_path/Makefile ]]
415	then
416	printf "\n *** update of \"$makefile\" "
417	cp -f -p $makefile $local_depository_path/Makefile
418	update=true
419
420	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
421	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
422	cd $local_depository_path
423	source_code_files_in_depository=`ls -1 *.$suf`
424	for filename in $source_code_files_in_depository
425	do
426	if [[ $(grep -c $filename Makefile) = 0 ]]
427	then
428	printf "\n *** source code file in \"$local_depository_path\":"
429	printf "\n $filename"
430	printf "\n is not listed in makefile"
431	if [[ $silent = false ]]
432	then
433	answer=dummy
434	printf "\n\n"
435	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
436	do
437	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
438	read answer
439	done
440	if [[ $answer = y \|\| $answer = Y ]]
441	then
442	base=`echo $filename \| cut -d. -f2`
443	rm -f $filename
444	rm -f ${base}.o ${base}.mod
445	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
446	else
447	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
448	fi
449	fi
450	fi
451	done
452	cd - > /dev/null 2>&1
453
454	elif [[ $local_depository_path/Makefile -nt $makefile ]]
455	then
456	printf "\n *** makefile in depository is newer than"
457	printf "\n \"$makefile\" "
458	if [[ $silent = false ]]
459	then
460	answer=dummy
461	printf "\n\n"
462	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
463	do
464	printf " >>> update \"$makefile\" (y/n) ? "
465	read answer
466	done
467	if [[ $answer = y \|\| $answer = Y ]]
468	then
469	cp -f -p $local_depository_path/Makefile $makefile
470	printf "\n *** \"$makefile\" updated"
471	else
472	printf "\n *** \"$makefile\" not updated"
473	fi
474	fi
475	fi
476
477	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
478	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
479	for filename in $source_code_files
480	do
481	if [[ $(grep -c $filename $makefile) = 0 ]]
482	then
483	printf "\n +++ source code file:"
484	printf "\n $filename"
485	printf "\n is not listed in makefile"
486	locat=makefile; exit
487	else
488	if [[ ! -f $local_depository_path/$filename ]]
489	then
490	cp -p $filename $local_depository_path
491	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
492	fi
493	if [[ $filename -nt $local_depository_path/$filename ]]
494	then
495	printf "\n *** update of source code file \"$filename\" "
496	cp -f -p $filename $local_depository_path
497	update=true
498	fi
499	fi
500	done
501
502
503	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
504	# ODER EVTL. NEUEREN DATUMS SIND
505	cd $local_depository_path
506	source_code_files_in_depository=`ls -1 *.$suf`
507	cd - > /dev/null 2>&1
508	for filename in $source_code_files_in_depository
509	do
510	if [[ ! -f $filename ]]
511	then
512	printf "\n *** source code file \"$filename\" does not exist in current directory"
513	if [[ $silent = false ]]
514	then
515	answer=dummy
516	printf "\n\n"
517	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
518	do
519	printf " >>> create \"$filename\" in current directory (y/n) ? "
520	read answer
521	done
522	if [[ $answer = y \|\| $answer = Y ]]
523	then
524	cp -p $local_depository_path/$filename $filename
525	printf "\n *** source code file \"$filename\" created in current directory"
526	else
527	printf "\n *** source code file \"$filename\" not created in current directory"
528	fi
529	fi
530	elif [[ $local_depository_path/$filename -nt $filename ]]
531	then
532	ls -al $local_depository_path/$filename
533	ls -al $filename
534	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
535	if [[ $silent = false ]]
536	then
537	answer=dummy
538	printf "\n\n"
539	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
540	do
541	printf " >>> update \"$filename\" in current directory (y/n) ? "
542	read answer
543	done
544	if [[ $answer = y \|\| $answer = Y ]]
545	then
546	cp -f -p $local_depository_path/$filename $filename
547	printf "\n *** source code file \"$filename\" updated in current directory"
548	else
549	printf "\n *** source code file \"$filename\" not updated in current directory"
550	fi
551	fi
552	fi
553	done
554
555	if [[ $update = false ]]
556	then
557	printf "\n *** no updates necessary in \"$local_depository_path\" "
558	if [[ $silent = false ]]
559	then
560	answer=dummy
561	printf "\n\n"
562	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
563	do
564	printf " >>> continue with updates on remote hosts (y/n) ? "
565	read answer
566	done
567	if [[ $answer = n \|\| $answer = N ]]
568	then
569	locat=user_abort; exit
570	fi
571	fi
572	fi
573	fi
574
575
576
577	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
578	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
579	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
580	printf "\n\n *** tar of makefile and source files in depository ..."
581	cd $local_depository_path
582	chmod u+w Makefile *.$suf
583	tar -cf ${mainprog}_sources.tar Makefile *.$suf
584	printf "\n"
585
586
587
588	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
589	if [[ $host = all ]]
590	then
591	printf "\n *** updates will be made for ALL hosts found in"
592	printf "\n the configuration file"
593	else
594	printf "\n *** update will be made for host \"$host\" "
595	fi
596
597	if [[ $silent = false ]]
598	then
599	answer=dummy
600	printf "\n\n"
601	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
602	do
603	printf " >>> continue (y/n) ? "
604	read answer
605	done
606	if [[ $answer = n \|\| $answer = N ]]
607	then
608	locat=user_abort; exit
609	fi
610	fi
611
612
613
614
615	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
616	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
617	printf "\n *** scanning configuration file for host(s) ..."
618
619	grep %fopts $config_file \| while read line
620	do
621	# KOMMENTARZEILEN UEBERSPRINGEN
622	[[ $(echo $line \| cut -c1) = "#" ]] && continue
623	(( ihost = ihost + 1 ))
624	hostline[$ihost]="$line"
625	done
626
627
628	while (( ih < ihost ))
629	do
630
631	(( ih = ih + 1 ))
632
633	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
634	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
635	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
636	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
637	remote_host=`echo $remote_host_string \| cut -d" " -f1`
638	if [[ $host != all ]]
639	then
640	[[ $remote_host != $host ]] && continue
641	fi
642	host_found=true
643	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
644	if [[ $condition1 = $remote_host ]]
645	then
646	condition1=""
647	else
648	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
649	fi
650
651
652	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
653	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
654	then
655	if [[ $ibm_hb_done = true ]]
656	then
657	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
658	printf "\n been carried out on one of the HLRN machines\n"
659	continue
660	fi
661	fi
662
663	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
664	if [[ $remote_host = lcmuk ]]
665	then
666	if [[ $lcmuk_done = true ]]
667	then
668	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
669	printf "\n been carried out on this host\n"
670	continue
671	fi
672	fi
673
674
675	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
676	netcdf_support=false
677	case $remote_host in
678	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
679	netcdf_support=true
680	if [[ $scirocco = true ]]
681	then
682	netcdf_path=/opt/netcdf/3.6.2-beta4
683	else
684	netcdf_path=/muksoft/packages/netcdf/linux
685	fi;;
686	(lctit) remote_addres=172.17.75.161; netcdf_support=true
687	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
688	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
689	netcdf_path=/usr/local/netcdf-3.5.1;;
690	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
691	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
692	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
693	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
694	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
695	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
696	netcdf_path=/applic/lib/NETCDF64;;
697	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
698	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
699	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
700	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
701	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
702	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
703	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
704	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
705	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
706	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
707	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
708	(*) printf "\n +++ remote host \"$remote_host\" unknown";
709	printf "\n please inform S. Raasch!";
710	locat=config_file; exit;;
711	esac
712
713
714	# REMOTE-USERNAMEN ERMITTELN
715	line=""
716	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
717	do
718	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
719	then
720	line="$line1"
721	fi
722	done
723
724	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
725	then
726	printf "\n +++ no remote username found in configuration file"
727	printf "\n for \"$remote_host_string\" "
728	locat=config_file; exit
729	else
730	remote_username=`echo $line \| cut -d" " -s -f2`
731	fi
732
733
734	# REMOTE-QUELLTEXTPFAD ERMITTELN
735	line=""
736	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
737	do
738	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
739	then
740	line="$line1"
741	fi
742	done
743
744	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
745	then
746	remote_source_path=`echo $line \| cut -d" " -s -f2`
747	fi
748	if [[ "$remote_source_path" = "" ]]
749	then
750	if [[ "$global_source_path" != "" ]]
751	then
752	remote_source_path=$global_source_path
753	else
754	printf "\n +++ no source path found in configuration file"
755	printf "\n for \"$remote_host_string\" "
756	locat=config_file; exit
757	fi
758	fi
759
760	remote_ud=${remote_source_path}/../UTIL
761	remote_ud=$(eval echo $remote_ud)
762
763	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
764	line=""
765	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
766	do
767	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
768	then
769	line="$line1"
770	fi
771	done
772
773	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
774	then
775	remote_md=`echo $line \| cut -d" " -s -f2`
776	fi
777	if [[ "$remote_md" = "" ]]
778	then
779	if [[ "$global_depository_path" != "" ]]
780	then
781	remote_md=$global_depository_path
782	else
783	printf "\n +++ no depository path found in configuration file"
784	printf "\n for \"$remote_host_string\" "
785	printf "\n please set \"\%depository_path\" in configuration file"
786	locat=config_file; exit
787	fi
788	fi
789
790	remote_md=$(eval echo $remote_md)
791
792
793	# COMPILERNAMEN ERMITTELN
794	line=""
795	grep "$remote_host_string" $config_file \| grep "%compiler_name " \| while read line1
796	do
797	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
798	then
799	line="$line1"
800	fi
801	done
802
803	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
804	then
805	printf "\n +++ no compiler name found in configuration file"
806	printf "\n for \"$remote_host_string\" "
807	locat=config_file; exit
808	else
809	compiler_name=`echo $line \| cut -d" " -s -f2`
810	fi
811
812
813	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
814	# SERIELLER COMPILERNAME ERMITTELT WERDEN
815	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
816	then
817	line=""
818	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" \| while read line1
819	do
820	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
821	then
822	line="$line1"
823	fi
824	done
825
826	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
827	then
828	printf "\n +++ no serial compiler name found in configuration file"
829	printf "\n for \"$remote_host_string\" "
830	locat=config_file; exit
831	else
832	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
833	fi
834	else
835	compiler_name_ser=$compiler_name
836	fi
837
838
839
840	# PRAEPROZESSOR-DIREKTIVEN SETZEN
841	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
842	then
843	if [[ $remote_host = ibms ]]
844	then
845	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
846	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
847	else
848	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
849	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
850	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
851	fi
852	elif [[ $remote_host = lcmuk ]]
853	then
854	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
855	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
856	elif [[ $remote_host = lctit ]]
857	then
858	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
859	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
860	elif [[ $remote_host = decalpha ]]
861	then
862	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
863	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
864	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
865	then
866	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
867	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
868	fi
869
870	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
871	then
872	for string in $remote_host_string
873	do
874	if [[ $(echo $string \| cut -c1-3) = ibm ]]
875	then
876	cpp_options="${cpp_options},-D__ibm"
877	if [[ $remote_host = ibmy ]]
878	then
879	cpp_options="${cpp_options},-D__ibmy_special"
880	fi
881	else
882	cpp_options="${cpp_options},-D__$string"
883	fi
884	done
885	cpp_options="$cpp_options "
886	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
887	then
888	for string in $remote_host_string
889	do
890	if [[ $(echo $string \| cut -c1-3) = nec ]]
891	then
892	cpp_options="${cpp_options} -D__nec"
893	else
894	cpp_options="${cpp_options} -D__$string"
895	fi
896	done
897	cpp_options="$cpp_options "
898	else
899	for string in $remote_host_string
900	do
901	cpp_options="$cpp_options -D__$string "
902	done
903	fi
904
905
906	# COMPILEROPTIONEN ERMITTELN
907	line=""
908	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
909	do
910	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
911	then
912	line="$line1"
913	fi
914	done
915	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
916	then
917	printf "\n +++ no compiler options found in configuration file"
918	printf "\n for \"$remote_host_string\" "
919	locat=config_file; exit
920	else
921	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
922	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
923	fi
924	if [[ $netcdf_support = true ]]
925	then
926	case $remote_host in
927	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
928	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
929	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
930	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
931	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
932	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
933	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
934	esac
935	fi
936
937
938
939	# LADER-OPTIONEN ERMITTELN
940	line=""
941	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
942	do
943	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
944	then
945	line="$line1"
946	fi
947	done
948
949	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
950	then
951	printf "\n +++ no loader options found in configuration file"
952	printf "\n for \"$remote_host_string\" "
953	locat=config_file; exit
954	else
955	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
956	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
957	fi
958	if [[ $netcdf_support = true ]]
959	then
960	case $remote_host in
961	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
962	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
963	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
964	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
965	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
966	esac
967	fi
968
969
970	printf "\n\n#------------------------------------------------------------------------# \n"
971	if [[ $remote_host = $local_host ]]
972	then
973	column1="remote_host:"; column2="$remote_host (= local host!)"
974	else
975	column1="remote_host:"; column2=$remote_host
976	fi
977	printf "\| $column1$column2 \| \n"
978	printf "\| \| \n"
979	column1="conditions:"; column2="$condition1 $condition2"
980	printf "\| $column1$column2 \| \n"
981	column1="make depository:"; column2=$remote_md
982	printf "\| $column1$column2 \| \n"
983	if [[ $compile_utility_programs = true ]]
984	then
985	column1="utility directory:"; column2=$remote_ud
986	printf "\| $column1$column2 \| \n"
987	fi
988	column1="username:"; column2=$remote_username
989	printf "\| $column1$column2 \| \n"
990	column1="addres:"; column2=$remote_addres
991	printf "\| $column1$column2 \| \n"
992	column1="compiler:"; column2=$compiler_name
993	printf "\| $column1$column2 \| \n"
994	if [[ $compile_utility_programs = true ]]
995	then
996	column1="serial compiler:"; column2=$compiler_name_ser
997	printf "\| $column1$column2 \| \n"
998	fi
999	column1="cpp options:"; column2=$cpp_options
1000	printf "\| $column1$column2 \| \n"
1001	line=$(echo "$cpp_options" \| cut -c51-)
1002	while [[ "$line" != "" ]]
1003	do
1004	column1=""
1005	column2=$line
1006	printf "\| $column1$column2 \| \n"
1007	line=$(echo "$line" \| cut -c51-)
1008	done
1009	column1="compiler options:"; column2=$compiler_options
1010	printf "\| $column1$column2 \| \n"
1011	line=$(echo "$compiler_options" \| cut -c51-)
1012	while [[ "$line" != "" ]]
1013	do
1014	column1=""
1015	column2=$line
1016	printf "\| $column1$column2 \| \n"
1017	line=$(echo "$line" \| cut -c51-)
1018	done
1019	column1="loader options:"; column2=$loader_options
1020	printf "\| $column1$column2 \| \n"
1021	line=$(echo "$loader_options" \| cut -c51-)
1022	while [[ "$line" != "" ]]
1023	do
1024	column1=""
1025	column2=$line
1026	printf "\| $column1$column2 \| \n"
1027	line=$(echo "$line" \| cut -c51-)
1028	done
1029	printf "#------------------------------------------------------------------------# \n"
1030
1031	if [[ $silent = false ]]
1032	then
1033	answer=dummy
1034	printf "\n\n"
1035	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1036	do
1037	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1038	read answer
1039	done
1040	if [[ $answer = a \|\| $answer = A ]]
1041	then
1042	locat=user_abort; exit
1043	fi
1044	if [[ $answer = c \|\| $answer = C ]]
1045	then
1046	silent=false
1047	fi
1048	if [[ $answer = s \|\| $answer = S ]]
1049	then
1050	continue
1051	fi
1052	fi
1053
1054
1055	if [[ $remote_mode = batch ]]
1056	then
1057
1058	# BATCH-JOB PARAMETER SETZEN
1059	case $remote_host in
1060	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1061	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1062	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1063	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1064	esac
1065
1066
1067	# BATCH-JOB ZUSAMMENSTELLEN
1068	printf "\n *** creating batch-job for remote host"
1069	echo " " > mbuild_job
1070
1071	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1072	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1073	if [[ $remote_host = t3ej2 ]]
1074	then
1075	echo "set +vx" >> mbuild_job
1076	echo ". .profile" >> mbuild_job
1077	echo "set -x" >> mbuild_job
1078	fi
1079
1080	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1081	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1082	then
1083	echo "module list" >> mbuild_job
1084	fi
1085
1086
1087	# WECHSEL IN TEMPORAERES VERZEICHNIS
1088	echo "cd ${remote_md}" >> mbuild_job
1089
1090
1091	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1092	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1093	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1094
1095
1096	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1097	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1098
1099
1100	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1101	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1102
1103
1104	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1105	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1106	echo "chmod u+w *" >> mbuild_job
1107
1108	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1109	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1110
1111
1112	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1113	echo "make clean" >> mbuild_job
1114	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1115	echo "rm *.f90 Makefile" >> mbuild_job
1116
1117
1118
1119	# JOB MITTELS SUBJOB STARTEN
1120	printf "\n *** sending batch job to remote host"
1121	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1122
1123
1124	# JOBFILE LOESCHEN
1125	# rm aljob
1126
1127	else
1128
1129	if [[ $remote_host != $local_host ]]
1130	then
1131
1132	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1133	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1134	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1135	if [[ $remote_host != lctit ]]
1136	then
1137	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1138	else
1139	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1140	# MIT SSH, DESHALB AUFRUF PER PIPE
1141	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1142	fi
1143	if [[ $local_host = decalpha ]]
1144	then
1145	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1146	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1147	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1148	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1149	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1150	else
1151	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1152	fi
1153
1154
1155
1156	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1157	echo " *** untar previous update on remote host, if existing"
1158	if [[ $remote_host != lctit ]]
1159	then
1160	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1161	else
1162	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1163	# MIT SSH, DESHALB AUFRUF PER PIPE
1164	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1165	fi
1166
1167
1168	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1169	echo " *** untar actual sources on remote host"
1170	if [[ $remote_host != lctit ]]
1171	then
1172	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1173	else
1174	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1175	# MIT SSH, DESHALB AUFRUF PER PIPE
1176	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1177	fi
1178
1179
1180	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1181	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1182	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1183	# Z.B. DIE PFADE ZUM COMPILER)
1184	echo " *** execute \"make\" on remote host"
1185
1186	if [[ $remote_host = nech ]]
1187	then
1188	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1189	else
1190	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1191	fi
1192
1193	if [[ $remote_host = t3eh ]]
1194	then
1195
1196	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1197
1198	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1199	then
1200
1201	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1202
1203	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1204	then
1205
1206	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1207
1208	elif [[ $remote_host = lctit ]]
1209	then
1210
1211	echo " " > ${remote_host}_last_make_protokoll
1212	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1213	do
1214	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1215	done
1216
1217	else
1218
1219	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1220
1221	fi
1222
1223	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1224	then
1225	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1226	if [[ $silent = false ]]
1227	then
1228	answer=dummy
1229	printf "\n"
1230	while [[ "$answer" != c && "$answer" != k ]]
1231	do
1232	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1233	read answer
1234	if [[ "$answer" = l ]]
1235	then
1236	more ${remote_host}_last_make_protokoll
1237	fi
1238	done
1239	if [[ $answer = k ]]
1240	then
1241	locat=user_abort; exit
1242	fi
1243	fi
1244	fi
1245
1246
1247
1248	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1249	printf "\n *** tar update on remote host ..."
1250	if [[ $remote_host != lctit ]]
1251	then
1252	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1253	else
1254	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1255	# MIT SSH, DESHALB AUFRUF PER PIPE
1256	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1257	fi
1258
1259
1260	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1261	# printf "\n *** \"make clean\" on remote host ..."
1262	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1263	# printf "\n"
1264
1265
1266
1267
1268	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1269	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1270	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1271	if [[ $compile_utility_programs = true ]]
1272	then
1273
1274	printf "\n\n"
1275	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1276	cd ${local_source_path}/../SCRIPTS
1277
1278	if [[ $remote_host != lctit ]]
1279	then
1280	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1281	else
1282	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1283	# MIT SSH, DESHALB AUFRUF PER PIPE
1284	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1285	fi
1286
1287	# KOPIEREN DER SCRIPTE
1288	if [[ $local_host = decalpha ]]
1289	then
1290	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1291	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1292	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1293	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1294	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1295	else
1296	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1297	fi
1298
1299	cd - > /dev/null
1300	cd ${local_source_path}/../UTIL
1301
1302
1303	# KOPIEREN DER UTILITY-PROGRAMME
1304	if [[ $local_host = decalpha ]]
1305	then
1306	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1307	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1308	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1309	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1310	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1311	else
1312	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1313	fi
1314
1315
1316
1317	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1318	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1319	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1320	# Z.B. DIE PFADE ZUM COMPILER)
1321	echo " *** execute \"make\" on remote host"
1322
1323	if [[ $remote_host = nech ]]
1324	then
1325	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1326	else
1327	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1328	fi
1329
1330	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1331	then
1332
1333	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1334
1335	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1336	then
1337
1338	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1339
1340	elif [[ $remote_host = lctit ]]
1341	then
1342
1343	echo " " > ${remote_host}_last_make_protokoll
1344	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1345	do
1346	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1347	done
1348
1349	else
1350
1351	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1352
1353	fi
1354
1355	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1356
1357
1358	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1359	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1360
1361	else
1362
1363	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1364	echo " "
1365	echo " *** execute \"make\" on local host"
1366
1367	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1368
1369	if [[ $? != 0 ]]
1370	then
1371	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1372	if [[ $silent = false ]]
1373	then
1374	answer=dummy
1375	printf "\n"
1376	while [[ "$answer" != c && "$answer" != k ]]
1377	do
1378	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1379	read answer
1380	if [[ "$answer" = l ]]
1381	then
1382	more ${remote_host}_last_make_protokoll
1383	fi
1384	done
1385	if [[ $answer = k ]]
1386	then
1387	locat=user_abort; exit
1388	fi
1389	fi
1390	fi
1391
1392
1393	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1394	printf "\n *** tar update on local host ..."
1395	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1396
1397
1398	# COMPILE THE UTILITY PROGRAMS
1399	if [[ $compile_utility_programs = true ]]
1400	then
1401	printf "\n\n"
1402	echo " *** compiling the utility programs ..."
1403	cd ${local_source_path}/../UTIL
1404	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1405	cd - > /dev/null
1406	fi
1407
1408
1409	# NUR EINMAL AUF LCMUK UEBERSETZEN
1410	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1411
1412	fi
1413
1414	fi
1415	done
1416
1417
1418	if [[ $host_found = false ]]
1419	then
1420	if [[ $host = all ]]
1421	then
1422	printf "\n +++ no hosts found in configuration file"
1423	else
1424	printf "\n +++ host \"$host\" not found in configuration file"
1425	fi
1426	locat=config_file; exit
1427	fi
1428
1429
1430
1431	# ABSCHLIESSENDE ARBEITEN
1432	rm -f hosts_found_in_config_file
1433

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |