Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1034

Last change on this file since 1034 was 1021, checked in by raasch, 12 years ago
script adjustments for lcsb (Seoul National University)
Property svn:keywords set to `Id Rev`
File size: 54.3 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 1021 2012-10-02 13:52:49Z raasch $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133	# bugfixes for the parameter file check, initial
134	# commands on ssh calls sourced out to .mrun.config
135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136	# 18/06/12 - Siggi - option -v (silent mode) added
137	# 25/06/12 - Siggi - option -K (block conditions) added
138	# 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
139	# 02/10/12 - Siggi - added lcsb
140
141
142	# VARIABLE DECLARATIONS + DEFAULT VALUES
143	block_conditions=none
144	block_conditions_found=false
145	compile_utility_programs=false
146	config_file=.mrun.config
147	fimm=false
148	host=all
149	host_found=false
150	locat=normal
151	makefile=""
152	module_calls=""
153	util_compiled_localhost=false
154	scirocco=false
155	silent=false
156	suf=f90
157	update=false
158	working_directory=`pwd`
159
160	typeset -i ih ihost=0
161
162	typeset -R30 calltime
163	typeset -L20 column1
164	typeset -L50 column2
165	typeset -L70 column3
166	typeset -L40 version="MBUILD 2.1 Rev$Rev: 1021 $"
167
168	# ERROR HANDLING
169	# IN CASE OF EXIT:
170	trap 'rm -rf $working_directory/tmp_mbuild
171	if [[ $locat != normal ]]
172	then
173	printf "\n\n +++ mbuild killed \n\n"
174	else
175	printf "\n\n *** mbuild finished \n\n"
176	fi' exit
177
178
179	# IN CASE OF TERMINAL-BREAK:
180	trap 'rm -rf $working_directory/tmp_mbuild
181	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
182	exit
183	' 2
184
185
186	tmp_mbuild=${working_directory}/tmp_mbuild
187
188	# READ SHELLSCRIPT-OPTIONS
189	while getopts :c:h:K:m:s:uv option
190	do
191	case $option in
192	(c) config_file=$OPTARG;;
193	(h) host=$OPTARG;;
194	(K) block_conditions=$OPTARG;;
195	(m) makefile=$OPTARG;;
196	(s) suf=$OPTARG;;
197	(u) compile_utility_programs=true;;
198	(v) silent=true;;
199	(\?) printf "\n +++ unknown option $OPTARG \n";
200	locat=parameter; exit;;
201	esac
202	done
203
204
205
206	# CHECK, IF CONFIGURATION-FILE EXISTS
207	if [[ ! -f $config_file ]]
208	then
209	printf "\n +++ configuration file: "
210	printf "\n $config_file"
211	printf "\n does not exist"
212	locat=configuration; exit
213	fi
214
215
216
217	# DETERMINE THE LOCAL HOST
218	local_host_real_name=$(hostname)
219	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
220
221
222
223	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
224	line=""
225	grep "%host_identifier" $config_file > $tmp_mbuild
226	while read line
227	do
228	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
229	then
230	HOSTNAME=`echo $line \| cut -d" " -s -f2`
231	host_identifier=`echo $line \| cut -d" " -s -f3`
232	if [[ $local_host_real_name = $HOSTNAME ]]
233	then
234	local_host=$host_identifier
235	break
236	fi
237	fi
238	done < $tmp_mbuild
239
240	if [[ "$local_host" = "" ]]
241	then
242	printf "\n +++ no host identifier found in configuration file \"$config_file\""
243	printf "\n for local host \"$local_host_real_name\"."
244	printf "\n Please add line"
245	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
246	printf "\n to the configuration file."
247	locat=local_host; exit
248	fi
249
250
251
252	[[ $local_host_real_name = scirocco ]] && scirocco=true
253	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
254
255
256
257	if [[ $local_host != ibms ]]
258	then
259	config_file=$PWD/$config_file
260	else
261	config_file=`pwd`/$config_file
262	fi
263
264
265	# determine the block conditions
266	if [[ $block_conditions != none ]]
267	then
268	block_condition1=`echo $block_conditions \| cut -d" " -f1`
269	block_condition2=`echo $block_conditions \| cut -d" " -f2`
270	if [[ "$block_condition2" = "$block_condition1" ]]
271	then
272	block_condition2=""
273	fi
274	fi
275
276
277	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
278	line=""
279	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
280	while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	local_username=`echo $line \| cut -d" " -s -f2`
285	fi
286	done < $tmp_mbuild
287
288
289	if [[ "$local_username" = "" ]]
290	then
291	printf "\n +++ no user name found in configuration file"
292	printf "\n for local host \"$local_host\" "
293	locat=config_file; exit
294	fi
295
296
297	# DETERMINE LOCAL SOURCE-CODE PATH.
298	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
299	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
300	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
301	line=""
302	grep "%" $config_file > $tmp_mbuild
303	while read line
304	do
305	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
306	then
307	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
308	value=`echo $line \| cut -d" " -s -f2`
309	eval export $var=\$value
310	fi
311	done < $tmp_mbuild
312
313	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
314	line=""
315	grep "%source_path" $config_file > $tmp_mbuild
316	while read line
317	do
318	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
319	then
320	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
321	then
322	global_source_path=`echo $line \| cut -d" " -s -f2`
323	fi
324	fi
325	done < $tmp_mbuild
326
327	line=""
328	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
329	while read line
330	do
331	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
332	then
333	local_source_path=`echo $line \| cut -d" " -s -f2`
334	fi
335	done < $tmp_mbuild
336
337	if [[ "$local_source_path" = "" ]]
338	then
339	if [[ "$global_source_path" != "" ]]
340	then
341	local_source_path=$global_source_path
342	else
343	printf "\n +++ no source path found in configuration file"
344	printf "\n for local host \"$local_host\" "
345	printf "\n please set \"\%source_path\" in configuration file"
346	locat=config_file; exit
347	fi
348	fi
349	eval local_source_path=$local_source_path
350	eval local_source_path=$local_source_path
351
352
353
354	# DETERMINE GLOBAL DEPOSITORY-PATH
355	line=""
356	grep "%depository_path" $config_file > $tmp_mbuild
357	while read line
358	do
359	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
360	then
361	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
362	then
363	global_depository_path=`echo $line \| cut -d" " -s -f2`
364	fi
365	fi
366	done < $tmp_mbuild
367
368	if [[ $found = false ]]
369	then
370	printf "\n +++ no \%depository_path found in"
371	printf "\n $config_file"
372	locat=depository_path; exit
373	fi
374
375	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
376	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
377	then
378	printf "\n +++ no main program or more than one main program defined"
379	printf "\n in configuration file"
380	locat=configuration; exit
381	else
382	line=`grep "%mainprog" $config_file`
383	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
384	then
385	printf "\n +++ no main program defined in configuration file"
386	locat=configuration; exit
387	fi
388	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
389	fi
390
391
392
393	# CHECK IF MAKEFILE EXITS
394	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
395	if [[ ! -f $makefile ]]
396	then
397	printf "\n +++ makefile: "
398	printf "\n $makefile"
399	printf "\n does not exist"
400	locat=makefile; exit
401	fi
402
403
404	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
405	calltime=$(date)
406	printf "\n"
407	printf "#------------------------------------------------------------------------# \n"
408	printf "\| $version$calltime \| \n"
409	printf "\| \| \n"
410	column1="called on:"; column2=$local_host_real_name
411	printf "\| $column1$column2 \| \n"
412	column1="local username:"; column2=$local_username
413	printf "\| $column1$column2 \| \n"
414	column1="local IP-addres:"; column2=$local_addres
415	printf "\| $column1$column2 \| \n"
416	column1="config file:"; column2=$config_file
417	printf "\| $column1$column2 \| \n"
418	column1="makefile:"; column2=$makefile
419	printf "\| $column1$column2 \| \n"
420	column1="local source path:"; column2=$local_source_path
421	printf "\| $column1$column2 \| \n"
422	printf "#------------------------------------------------------------------------# \n"
423
424	# printf "\| \| \n"
425
426
427	if [[ $compile_utility_programs = false ]]
428	then
429
430	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
431	# WITH OVERWRITING FILES ON THE REMOTE HOST
432	cd $local_source_path
433	printf "\n\n *** tar of makefile and source files in $local_source_path"
434	tar -cf ${mainprog}_sources.tar Makefile *.$suf
435	printf "\n"
436
437	else
438	cd $local_source_path
439	printf "\n\n *** tar of makefile and source files in $local_source_path"
440
441	cat Makefile_check\|while read line
442	do
443	line=$(echo $line\|grep RCS)
444	if [[ $line == "RCS" ]]
445	then
446	line=$(echo $line\|sed 's/RCS = //g')
447	break
448	fi
449	done
450
451	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
452	printf "\n"
453	fi
454
455
456
457	# GET CONFIRMATION TO CONTINUE
458	if [[ $host = all ]]
459	then
460	printf "\n *** updates will be made for ALL hosts found in"
461	printf "\n the configuration file"
462	else
463	printf "\n *** update will be made for host \"$host\" "
464	fi
465
466	if [[ $silent = false ]]
467	then
468	answer=dummy
469	printf "\n\n"
470	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
471	do
472	printf " >>> continue (y/n) ? "
473	read answer
474	done
475	if [[ $answer = n \|\| $answer = N ]]
476	then
477	locat=user_abort; exit
478	fi
479	fi
480
481
482
483
484	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
485	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
486	printf "\n *** scanning configuration file for host(s) ..."
487
488	grep %fopts $config_file > $tmp_mbuild
489	while read line
490	do
491	# KOMMENTARZEILEN UEBERSPRINGEN
492	[[ $(echo $line \| cut -c1) = "#" ]] && continue
493	(( ihost = ihost + 1 ))
494	hostline[$ihost]="$line"
495	done < $tmp_mbuild
496
497
498	while (( ih < ihost ))
499	do
500
501	(( ih = ih + 1 ))
502
503	# determine remote host and conditions for the respective block
504	# continue, only if this host has been chosen via -h option and if
505	# conditions have been chosen via -K option
506	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
507	remote_host=`echo $remote_host_string \| cut -d" " -f1`
508	if [[ $host != all ]]
509	then
510	[[ $remote_host != $host ]] && continue
511	fi
512	host_found=true
513	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
514	if [[ $condition1 = $remote_host ]]
515	then
516	condition1=""
517	else
518	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
519	fi
520
521	if [[ $block_conditions != none ]]
522	then
523	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
524	then
525	continue
526	fi
527	block_conditions_found=true
528	fi
529
530	modules=""
531	netcdf_inc=""
532	netcdf_lib=""
533	make_options=""
534
535	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
536	case $remote_host in
537	(lckordi) remote_adress=210.219.61.8;;
538	(lcmuk) remote_addres=130.75.105.2;;
539	(lcrte) remote_addres=133.5.185.60;;
540	(lcsb) remote_adress=147.46.30.151;;
541	(lcsgib) remote_addres=130.73.232.102;;
542	(lcsgih) remote_addres=130.75.4.101;;
543	(lck) remote_addres=165.132.26.61;;
544	(lctit) remote_addres=10.1.6.170;;
545	(lcxe6) remote_addres=129.177.20.113;;
546	(lcxt5m) remote_addres=193.166.211.144;;
547	(decalpha) remote_addres=165.132.26.56;;
548	(ibmh) remote_addres=136.172.40.15;;
549	(ibmkisti) remote_addres=150.183.146.24;;
550	(ibmku) remote_addres=133.5.4.129;;
551	(ibms) remote_addres=150.183.5.101;;
552	(ibmy) remote_addres=165.132.26.58;;
553	(nech) remote_addres=136.172.44.192;;
554	(neck) remote_addres=133.5.178.11;;
555	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
556	(*) if [[ $local_host != $remote_host ]]
557	then
558	printf "\n +++ remote host \"$remote_host\" unknown";
559	printf "\n please inform PALM group support!"
560	fi;;
561	esac
562
563
564	# REMOTE-USERNAMEN ERMITTELN
565	line=""
566	found=false
567	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
568	while read line1
569	do
570
571	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
572	then
573	line="$line1"
574	fi
575
576	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
577	then
578	remote_username=`echo $line \| cut -d" " -s -f2`
579	found=true
580	fi
581
582	done < $tmp_mbuild
583
584	if [[ $found = false ]]
585	then
586	printf "\n +++ no remote username found in configuration file"
587	printf "\n for \"$remote_host_string\" "
588	locat=config_file; exit
589	fi
590
591
592	# REMOTE-QUELLTEXTPFAD ERMITTELN
593	line=""
594	remote_source_path=""
595	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
596	while read line1
597	do
598
599	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
600	then
601	line="$line1"
602	fi
603
604	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
605	then
606	remote_source_path=`echo $line \| cut -d" " -s -f2`
607	fi
608
609	done < $tmp_mbuild
610
611	if [[ "$remote_source_path" = "" ]]
612	then
613	if [[ "$global_source_path" != "" ]]
614	then
615	remote_source_path=$global_source_path
616	else
617	printf "\n +++ no source path found in configuration file"
618	printf "\n for \"$remote_host_string\" "
619	locat=config_file; exit
620	fi
621	fi
622
623	remote_ud=${remote_source_path}/../UTIL
624	remote_ud=$(eval echo $remote_ud)
625
626
627	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
628	remote_md=""
629	line=""
630	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
631	while read line1
632	do
633
634	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
635	then
636	line="$line1"
637	fi
638
639	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
640	then
641	remote_md=`echo $line \| cut -d" " -s -f2`
642	fi
643
644	done < $tmp_mbuild
645
646	if [[ "$remote_md" = "" ]]
647	then
648	if [[ "$global_depository_path" != "" ]]
649	then
650	remote_md=$global_depository_path
651	else
652	printf "\n +++ no depository path found in configuration file"
653	printf "\n for \"$remote_host_string\" "
654	printf "\n please set \"\%depository_path\" in configuration file"
655	locat=config_file; exit
656	fi
657	fi
658
659	remote_md=$(eval echo $remote_md)
660	block=""
661	[[ "$condition1" != "" ]] && block=_$condition1
662	[[ "$condition2" != "" ]] && block=${block}_$condition2
663	remote_md=${remote_md}$block
664
665
666	# COMPILERNAMEN ERMITTELN
667	line=""
668	found=false
669	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
670	while read line1
671	do
672
673	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
674	then
675	line="$line1"
676	fi
677
678	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
679	then
680	compiler_name=`echo $line \| cut -d" " -s -f2`
681	found=true
682	fi
683
684	done < $tmp_mbuild
685
686	if [[ $found = false ]]
687	then
688	printf "\n +++ no compiler name found in configuration file"
689	printf "\n for \"$remote_host_string\" "
690	locat=config_file; exit
691	fi
692
693
694	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
695	# SERIELLER COMPILERNAME ERMITTELT WERDEN
696	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
697	then
698	line=""
699	found=false
700	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
701	while read line1
702	do
703
704	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
705	then
706	line="$line1"
707	fi
708
709	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
710	then
711	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
712	found=true
713	fi
714
715	done < $tmp_mbuild
716
717	if [[ $found = false ]]
718	then
719	printf "\n +++ no serial compiler name found in configuration file"
720	printf "\n for \"$remote_host_string\" "
721	locat=config_file; exit
722	fi
723	else
724	compiler_name_ser=$compiler_name
725	fi
726
727
728
729	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
730	line=""
731	found=false
732	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
733	while read line1
734	do
735
736	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
737	then
738	line="$line1"
739	fi
740
741	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
742	then
743	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
744	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
745	found=true
746	fi
747
748	done < $tmp_mbuild
749
750	if [[ $found = false ]]
751	then
752	printf "\n +++ no preprocessor options found in configuration file"
753	printf "\n for \"$remote_host_string\" "
754	locat=config_file; exit
755	fi
756
757
758	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
759	for string in $remote_host_string
760	do
761	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
762	then
763	cpp_options="$cpp_options -D__lc "
764	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
765	then
766	cpp_options="${cpp_options},-D__ibm"
767	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
768	then
769	cpp_options="${cpp_options} -D__nec"
770	else
771	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
772	then
773	cpp_options="${cpp_options},-D__$string"
774	else
775	cpp_options="$cpp_options -D__$string "
776	fi
777	fi
778	done
779
780
781
782	# NETCDF-OPTIONEN ERMITTELN
783	line=""
784	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
785	while read line1
786	do
787
788	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
789	then
790	line="$line1"
791	fi
792
793	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
794	then
795	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
796	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
797	fi
798
799	done < $tmp_mbuild
800
801	line=""
802	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
803	while read line1
804	do
805
806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
807	then
808	line="$line1"
809	fi
810
811	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
812	then
813	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
814	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
815	fi
816
817	done < $tmp_mbuild
818
819
820
821	# get make options
822	line=""
823	found=false
824	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
825	while read line1
826	do
827
828	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
829	then
830	line="$line1"
831	fi
832
833	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
834	then
835	# remove colons from directive string
836	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
837
838	fi
839
840	done < $tmp_mbuild
841
842
843
844	# COMPILEROPTIONEN ERMITTELN
845	line=""
846	found=false
847	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
848	while read line1
849	do
850
851	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
852	then
853	line="$line1"
854	fi
855
856	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
857	then
858	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
859	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
860	found=true
861
862	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
863	compiler_options="$compiler_options $netcdf_inc"
864	fi
865
866	done < $tmp_mbuild
867
868	if [[ $found = false ]]
869	then
870	printf "\n +++ no compiler options found in configuration file"
871	printf "\n for \"$remote_host_string\" "
872	locat=config_file; exit
873	fi
874
875
876	# get login init commands, "::" is replacing a space
877	line=""
878	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
879	while read line1
880	do
881
882	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
883	then
884	line="$line1"
885	fi
886
887	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
888	then
889	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
890	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
891	fi
892	init_cmds="${init_cmds};"
893	done < $tmp_mbuild
894
895
896	# get modules to be loaded
897	line=""
898	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
899	while read line1
900	do
901
902	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
903	then
904	line="$line1"
905	fi
906
907	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
908	then
909	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
910	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
911	fi
912
913	done < $tmp_mbuild
914
915
916	# LADER-OPTIONEN ERMITTELN
917	line=""
918	found=false
919	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
920	while read line1
921	do
922
923	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
924	then
925	line="$line1"
926	fi
927
928	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
929	then
930	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
931	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
932	found=true
933
934	# NETCDF-LIBRARY HINZUFUEGEN
935	loader_options="$loader_options $netcdf_lib"
936	fi
937
938	done < $tmp_mbuild
939
940	if [[ $found = false ]]
941	then
942	printf "\n +++ no loader options found in configuration file"
943	printf "\n for \"$remote_host_string\" "
944	locat=config_file; exit
945	fi
946
947
948	printf "\n\n#------------------------------------------------------------------------# \n"
949	if [[ $remote_host = $local_host ]]
950	then
951	column1="remote_host:"; column2="$remote_host (= local host!)"
952	else
953	column1="remote_host:"; column2=$remote_host
954	fi
955	printf "\| $column1$column2 \| \n"
956	printf "\| \| \n"
957	column1="conditions:"; column2="$condition1 $condition2"
958	printf "\| $column1$column2 \| \n"
959	column1="make depository:"; column2=$remote_md
960	printf "\| $column1$column2 \| \n"
961	line=$(echo "$remote_md" \| cut -c51-)
962	while [[ "$line" != "" ]]
963	do
964	column1=""
965	column2=$line
966	printf "\| $column1$column2 \| \n"
967	line=$(echo "$line" \| cut -c51-)
968	done
969	if [[ $compile_utility_programs = true ]]
970	then
971	column1="utility directory:"; column2=$remote_ud
972	printf "\| $column1$column2 \| \n"
973	fi
974	column1="username:"; column2=$remote_username
975	printf "\| $column1$column2 \| \n"
976	column1="addres:"; column2=$remote_addres
977	printf "\| $column1$column2 \| \n"
978	column1="compiler:"; column2=$compiler_name
979	printf "\| $column1$column2 \| \n"
980	if [[ $compile_utility_programs = true ]]
981	then
982	column1="serial compiler:"; column2=$compiler_name_ser
983	printf "\| $column1$column2 \| \n"
984	fi
985	if [[ "$make_options" != "" ]]
986	then
987	column1="make options:"; column2=$make_options
988	printf "\| $column1$column2 \| \n"
989	fi
990	column1="cpp options:"; column2=$cpp_options
991	printf "\| $column1$column2 \| \n"
992	line=$(echo "$cpp_options" \| cut -c51-)
993	while [[ "$line" != "" ]]
994	do
995	column1=""
996	column2=$line
997	printf "\| $column1$column2 \| \n"
998	line=$(echo "$line" \| cut -c51-)
999	done
1000	column1="compiler options:"; column2=$compiler_options
1001	printf "\| $column1$column2 \| \n"
1002	line=$(echo "$compiler_options" \| cut -c51-)
1003	while [[ "$line" != "" ]]
1004	do
1005	column1=""
1006	column2=$line
1007	printf "\| $column1$column2 \| \n"
1008	line=$(echo "$line" \| cut -c51-)
1009	done
1010	column1="loader options:"; column2=$loader_options
1011	printf "\| $column1$column2 \| \n"
1012	line=$(echo "$loader_options" \| cut -c51-)
1013	while [[ "$line" != "" ]]
1014	do
1015	column1=""
1016	column2=$line
1017	printf "\| $column1$column2 \| \n"
1018	line=$(echo "$line" \| cut -c51-)
1019	done
1020	if [[ $modules != "" ]]
1021	then
1022	column1="modules to be load:"; column2=$modules
1023	printf "\| $column1$column2 \| \n"
1024	line=$(echo "$modules" \| cut -c51-)
1025	while [[ "$line" != "" ]]
1026	do
1027	column1=""
1028	column2=$line
1029	printf "\| $column1$column2 \| \n"
1030	line=$(echo "$line" \| cut -c51-)
1031	done
1032	fi
1033	printf "#------------------------------------------------------------------------# \n"
1034
1035	if [[ $silent = false ]]
1036	then
1037	answer=dummy
1038	printf "\n\n"
1039	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1040	do
1041	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1042	read answer
1043	done
1044	if [[ $answer = a \|\| $answer = A ]]
1045	then
1046	locat=user_abort; exit
1047	fi
1048	if [[ $answer = c \|\| $answer = C ]]
1049	then
1050	silent=true
1051	fi
1052	if [[ $answer = s \|\| $answer = S ]]
1053	then
1054	continue
1055	fi
1056	fi
1057
1058
1059	# make on remote host
1060	if [[ $remote_host != $local_host ]]
1061	then
1062	if [[ $compile_utility_programs = false ]]
1063	then
1064
1065	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1066	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1067	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1068	if [[ $remote_host != lctit ]]
1069	then
1070	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1071	else
1072	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1073	# MIT SSH, DESHALB AUFRUF PER PIPE
1074	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1075	fi
1076	if [[ $local_host = decalpha ]]
1077	then
1078	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1079	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1080	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1081	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1082	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1083	else
1084	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1085	fi
1086
1087
1088
1089	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1090	echo " *** untar previous update on remote host, if existing"
1091	if [[ $remote_host != lctit ]]
1092	then
1093	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1094	else
1095	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1096	# MIT SSH, DESHALB AUFRUF PER PIPE
1097	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1098	fi
1099
1100
1101	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1102	echo " *** untar actual sources on remote host"
1103	if [[ $remote_host != lctit ]]
1104	then
1105	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1106	else
1107	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1108	# MIT SSH, DESHALB AUFRUF PER PIPE
1109	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1110	fi
1111
1112
1113	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1114	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1115	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1116	# Z.B. DIE PFADE ZUM COMPILER)
1117	echo " *** execute \"make\" on remote host"
1118
1119
1120	# generate make call with make options
1121	if [[ $remote_host = nech ]]
1122	then
1123	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1124	else
1125	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1126	fi
1127
1128	# generate command to load modules, if modules are given
1129	if [[ "$modules" != "" ]]
1130	then
1131	if [[ $remote_host = lctit ]]
1132	then
1133	module_calls=". $modules"
1134	else
1135	module_calls="module load ${modules};"
1136	fi
1137
1138	# bugfix for wrong netcdf module
1139	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1140	then
1141	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1142	then
1143	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1144	fi
1145	fi
1146	else
1147	module_calls=""
1148	fi
1149
1150	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1151	then
1152
1153	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1154
1155	elif [[ $remote_host = ibmh ]]
1156	then
1157
1158	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1159
1160	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1161	then
1162	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1163	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1164
1165	elif [[ $remote_host = lctit ]]
1166	then
1167
1168	echo " " > ${remote_host}_last_make_protokoll
1169	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1170	do
1171	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1172	done
1173
1174	elif [[ $remote_host = lcxe6 ]]
1175	then
1176
1177	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1178
1179	else
1180
1181	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1182
1183	fi
1184
1185	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1186	then
1187	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1188	if [[ $silent = false ]]
1189	then
1190	answer=dummy
1191	printf "\n"
1192	while [[ "$answer" != c && "$answer" != k ]]
1193	do
1194	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1195	read answer
1196	if [[ "$answer" = l ]]
1197	then
1198	more ${remote_host}_last_make_protokoll
1199	fi
1200	done
1201	if [[ $answer = k ]]
1202	then
1203	locat=user_abort; exit
1204	fi
1205	fi
1206	fi
1207
1208
1209
1210	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1211	printf "\n *** tar update on remote host ..."
1212	if [[ $remote_host != lctit ]]
1213	then
1214	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1215	else
1216	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1217	# MIT SSH, DESHALB AUFRUF PER PIPE
1218	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1219	fi
1220
1221
1222	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1223	# printf "\n *** \"make clean\" on remote host ..."
1224	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1225	# printf "\n"
1226
1227
1228
1229
1230	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1231	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1232	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1233	elif [[ $compile_utility_programs = true ]]
1234	then
1235
1236	printf "\n\n"
1237	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1238	cd ${local_source_path}/../SCRIPTS
1239
1240	if [[ $remote_host != lctit ]]
1241	then
1242	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1243	else
1244	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1245	# MIT SSH, DESHALB AUFRUF PER PIPE
1246	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1247	fi
1248
1249	# KOPIEREN DER SCRIPTE
1250	if [[ $local_host = decalpha ]]
1251	then
1252	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1253	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1254	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1255	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1256	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1257	else
1258	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1259	fi
1260
1261	cd - > /dev/null
1262	cd ${local_source_path}/../UTIL
1263
1264
1265	# KOPIEREN DER UTILITY-PROGRAMME
1266	if [[ $local_host = decalpha ]]
1267	then
1268	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1269	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1270	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1271	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1272	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1273	else
1274	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1275	fi
1276
1277
1278
1279	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1280	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1281	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1282	# Z.B. DIE PFADE ZUM COMPILER)
1283	echo " *** execute \"make\" on remote host"
1284
1285	if [[ $remote_host = nech ]]
1286	then
1287	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1288	else
1289	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1290	fi
1291
1292	# generate command to load modules, if modules are given
1293	if [[ "$modules" != "" ]]
1294	then
1295	if [[ $remote_host = lctit ]]
1296	then
1297	module_calls=". $modules"
1298	else
1299	module_calls="module load ${modules};"
1300	fi
1301
1302	# bugfix for wrong netcdf module
1303	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1304	then
1305	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1306	then
1307	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1308	fi
1309	fi
1310	else
1311	module_calls=""
1312	fi
1313
1314
1315	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1316	then
1317
1318	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1319
1320	elif [[ $remote_host = ibmh ]]
1321	then
1322
1323	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1324
1325	elif [[ $remote_host = lctit ]]
1326	then
1327
1328	echo " " > ${remote_host}_last_make_protokoll
1329	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1330	do
1331	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1332	done
1333
1334	elif [[ $remote_host = lcxe6 ]]
1335	then
1336
1337	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1338
1339	else
1340
1341	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1342
1343	fi
1344
1345	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1346
1347	rm -rf ${remote_host}_last_make_protokoll
1348
1349	# make on local host
1350	else
1351
1352	# workaround for lcxe6
1353	if [[ $remote_host = lcxe6 ]]
1354	then
1355
1356	eval $init_cmds
1357
1358	fi
1359
1360	# first load modules, if given
1361	if [[ "$modules" != "" ]]
1362	then
1363	if [[ $remote_host = lctit ]]
1364	then
1365	. $modules
1366	else
1367	module load ${modules}
1368	fi
1369	fi
1370
1371
1372	if [[ $compile_utility_programs = false ]]
1373	then
1374
1375	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1376	eval remote_md=$remote_md
1377	if [[ ! -d $remote_md ]]
1378	then
1379	if mkdir $remote_md
1380	then
1381	printf "\n\n *** directory for make depository:"
1382	printf "\n $remote_md"
1383	printf "\n was created\n"
1384	else
1385	printf "\n +++ directory for make depository:"
1386	printf "\n $remote_md"
1387	printf "\n cannot be created"
1388	locat=local_depository_path; exit
1389	fi
1390	fi
1391
1392	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1393	echo " "
1394	echo " *** updating sources in $remote_md"
1395	cd $remote_md
1396	cp $local_source_path/${mainprog}_sources.tar .
1397	tar xf ${mainprog}_sources.tar
1398
1399	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1400	echo " "
1401	echo " *** execute \"make\" on local host"
1402
1403	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1404
1405	if [[ $? != 0 ]]
1406	then
1407	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1408	if [[ $silent = false ]]
1409	then
1410	answer=dummy
1411	printf "\n"
1412	while [[ "$answer" != c && "$answer" != k ]]
1413	do
1414	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1415	read answer
1416	if [[ "$answer" = l ]]
1417	then
1418	more ${remote_host}_last_make_protokoll
1419	fi
1420	done
1421	if [[ $answer = k ]]
1422	then
1423	locat=user_abort; exit
1424	fi
1425	fi
1426	fi
1427
1428
1429	# TAR NEW VERSION ON LOCAL HOST
1430	printf "\n *** tar update on local host ..."
1431	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1432
1433
1434	# COMPILE THE UTILITY PROGRAMS
1435	elif [[ $compile_utility_programs = true ]]
1436	then
1437	printf "\n\n"
1438	echo " *** compiling the utility programs ..."
1439	cd ${local_source_path}/../UTIL
1440
1441	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1442	touch *.f90
1443	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1444
1445	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1446	if [[ $util_compiled_localhost == false ]]
1447	then
1448	printf "\n\n"
1449	echo " *** compiling the mrun GUI"
1450	if which qmake >/dev/null; then
1451	cd mrungui
1452	touch *
1453	qmake
1454	make
1455	make clean
1456	rm Makefile
1457	cd ..
1458	else
1459	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1460	fi
1461
1462	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1463
1464	printf "\n\n"
1465	echo " *** compiling check_namelist_files ..."
1466
1467	# GET CHECK OPTIONS
1468	line=""
1469	found=false
1470	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1471	while read line1
1472	do
1473
1474	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1475	then
1476	line="$line1"
1477	fi
1478
1479	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1480	then
1481	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1482	line="$line "
1483	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1484	found=true
1485	fi
1486
1487	done < $tmp_mbuild
1488	copts_check="$copts_check -D__check -D__parallel"
1489
1490	check_depository_path=${local_source_path}/../UTIL
1491	cd $check_depository_path
1492	mkdir check_tmp
1493	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1494	cd check_tmp
1495	tar -xf ${mainprog}_sources_check.tar
1496	rm -rf ${mainprog}_sources_check.tar
1497
1498	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
1499	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1500	mv check_namelist_files.tar $check_depository_path
1501	mv check_namelist_files.x $PALM_BIN
1502	cd $check_depository_path
1503	rm -rf check_tmp
1504	util_compiled_localhost=true
1505	else
1506	cd $check_depository_path
1507	printf "\n\n"
1508	echo " *** skipped compilation of mrun GUI."
1509	printf "\n\n"
1510	echo " *** skipped compilation of check_namelist_files."
1511	fi
1512
1513	fi
1514	fi
1515	done
1516
1517
1518	if [[ $host_found = false ]]
1519	then
1520	if [[ $host = all ]]
1521	then
1522	printf "\n +++ no hosts found in configuration file"
1523	else
1524	printf "\n +++ host \"$host\" not found in configuration file"
1525	fi
1526	locat=config_file; exit
1527	fi
1528
1529	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1530	then
1531	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1532	fi
1533
1534
1535	# FINAL WORK
1536	rm -f hosts_found_in_config_file
1537	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1538

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |