source: palm/trunk/SCRIPTS/mbuild @ 1018

Last change on this file since 1018 was 1018, checked in by raasch, 11 years ago

compiler options (F90FLAGS) added for namelist check

  • Property svn:keywords set to Id Rev
File size: 54.2 KB
Line 
1#!/bin/ksh
2# mbuild - script for compiling the PALM code and its utility programs
3# $Id: mbuild 1018 2012-09-27 12:48:16Z raasch $
4
5     # Procedure to compile code on local and remote hosts using the
6     # make-mechanism. The source code must be provided on the local host.
7
8     # Last changes:
9     # 06/05/02 - Siggi - start development
10     # 12/06/02 - Siggi - first version finished
11     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12     # 19/12/02 - Siggi - ibmb included
13     # 05/02/03 - Siggi - hostname nobela included
14     # 04/03/03 - Siggi - host nech included
15     # 06/03/03 - Siggi - make_call_string is echoed without '' to
16     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
17     #                    '' are part of compiler options
18     # 16/03/03 - Siggi - Two underscores are placed in front of every define
19     #                    string, in case that palm.f90 version contains
20     #                    such strings
21     # 16/04/03 - Siggi - First extensions for linux machines
22     # 24/06/03 - Siggi - host orkan included
23     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24     # 24/07/03 - Siggi - host maestro admitted
25     # 06/08/03 - Siggi - host gregale admitted
26     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
29     #                    (-D$OMP=OMP) in order to avoid problems with
30     #                    OMP_NUM_THREADS
31     # 09/01/04 - Siggi - action above cancelled
32     # 28/01/04 - Siggi - action above re-cancelled
33     # 08/03/04 - Siggi - host scirocco admitted
34     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35     #                    the respective .f90 file is not listed in the makefile
36     #                    and deletion is demanded by the user
37     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38     #                    due to error in ssh installation (otherwise a prompt
39     #                    for the password appears)
40     # 23/07/04 - Siggi - changes due to the new berni configuration
41     #                    (federation switch)
42     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
46     # 24/04/05 - Siggi - netcdf support on lcmuk
47     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48     # 12/05/05 - Siggi - netcdf support on ibm
49     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
50     # 18/05/05 - Siggi - netcdf support on nec
51     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52     # 23/05/05 - Siggi - netcdf support on ibms
53     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54     # 30/06/05 - Siggi - netcdf support on bora
55     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58     #                    host gfdl5 (ibmy) admitted
59     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60     # 20/01/06 - Siggi - cpp directive for ibmy
61     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62     # 10/02/06 - Siggi - modifications for scp on decalpha
63     # 13/04/06 - Siggi - ostria admitted
64     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66     # 29/05/05 - Siggi - atmos (lcide) admitted
67     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68     # 24/11/06 - Siggi - breva and levanto admitted
69     # 07/02/07 - Siggi - adapted for RIAM (neck)
70     # 10/02/07 - Siggi - all hpmuk-related code removed
71     # 02/03/07 - Siggi - compilation of utility programs and transfer of
72     #                    scripts to remote hosts added (option -u)
73     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74     #                    output
75     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
76     #                    adjustments for running under pdksh, local ip-addres
77     #                    is not determined any more
78     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79     #                    from configuration file
80     #                    host identifier (local_host) is read from config file
81     # 10/10/07 - Siggi - bugfix: handling of comment lines
82     # 18/07/08 - Siggi - adapted for lcsgih
83     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84     #                    ({mainprog}_current_version)
85     # 02/10/08 - Siggi - adapted for lcxt4
86     # 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87     #                    remains in source directory, one depository per block
88     #                    (given in the config-file) is created, allways all
89     #                    files from the source directory are copied to the
90     #                    respective depository, no additional file checks are
91     #                    done any more (version 2.1)
92     # 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93     #                    other machines)
94     # 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95     #                    .dvrserver.config
96     # 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97     # 25/08/09 - BjornM- adapted for lck
98     # 01/12/09 - BjornM- re-adjustments for lcxt4
99     # 01/02/10 - Siggi - adjustments for lcxt5m
100     # 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101     #                    implemented, remoted mode option -r completely
102     #                    removed, t3e related parts removed
103     # 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104     # 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105     #                    removed; modules should now be given in the
106     #                    configuration file
107     # 02/03/10 - Siggi - utility programs are created separately for each
108     #                    block in the configuration file,
109     #                    parallel make for utility programs
110     # 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111     # 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112     #                    for lcxt4
113     # 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114     # 08/12/10 - Siggi - initialization of the module command changed for
115     #                    SGI-ICE/lcsgi
116     #                    adjustments for Kyushu Univ. (lcrte, ibmku)
117     # 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118     #                    institute of technology (lctit)
119     # 04/03/11 - BjornM- re-adjustments for lcxt4
120     # 06/03/11 - Siggi - adjustments for ibmkisti
121     # 03/04/11 - Micha - added lckordi
122     # 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123     # 27/11/11 - Siggi - Bugfix for make options setting (-j)
124     # 12/12/11 - BjornM- added mrun GUI to ulitity programs
125     # 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126     #                    check program) has been added to the utility branch),
127     #                    modfified the compilation of mrungui
128     # 31/01/12 - BjornM- bugfix for compilation of utility programs on
129     #                    multiple localhost branches
130     # 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131     #                    corrected
132     # 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133     #                    bugfixes for the parameter file check, initial
134     #                    commands on ssh calls sourced out to .mrun.config
135     # 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136     # 18/06/12 - Siggi - option -v (silent mode) added
137     # 25/06/12 - Siggi - option -K (block conditions) added
138     # 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
139
140
141    # VARIABLE DECLARATIONS + DEFAULT VALUES
142 block_conditions=none
143 block_conditions_found=false
144 compile_utility_programs=false
145 config_file=.mrun.config
146 fimm=false
147 host=all
148 host_found=false
149 locat=normal
150 makefile=""
151 module_calls=""
152 util_compiled_localhost=false
153 scirocco=false
154 silent=false
155 suf=f90
156 update=false
157 working_directory=`pwd`
158
159 typeset -i  ih ihost=0
160
161 typeset  -R30 calltime
162 typeset  -L20 column1
163 typeset  -L50 column2
164 typeset  -L70 column3
165 typeset  -L40 version="MBUILD  2.1  Rev$Rev: 1018 $"
166
167    # ERROR HANDLING
168    # IN CASE OF EXIT:
169 trap 'rm -rf  $working_directory/tmp_mbuild
170       if [[ $locat != normal ]]
171       then
172          printf "\n\n +++ mbuild killed \n\n"
173       else
174          printf "\n\n *** mbuild finished \n\n"
175       fi' exit
176
177
178    # IN CASE OF TERMINAL-BREAK:
179 trap 'rm -rf  $working_directory/tmp_mbuild
180       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
181       exit
182      ' 2
183
184
185 tmp_mbuild=${working_directory}/tmp_mbuild
186
187    # READ SHELLSCRIPT-OPTIONS
188 while  getopts  :c:h:K:m:s:uv  option
189 do
190   case  $option  in
191       (c)   config_file=$OPTARG;;
192       (h)   host=$OPTARG;;
193       (K)   block_conditions=$OPTARG;;
194       (m)   makefile=$OPTARG;;
195       (s)   suf=$OPTARG;;
196       (u)   compile_utility_programs=true;;
197       (v)   silent=true;;
198       (\?)  printf "\n  +++ unknown option $OPTARG \n";
199             locat=parameter; exit;;
200   esac
201 done
202
203
204
205    # CHECK, IF CONFIGURATION-FILE EXISTS
206 if [[ ! -f $config_file ]]
207 then
208    printf "\n  +++ configuration file: "
209    printf "\n           $config_file"
210    printf "\n      does not exist"
211    locat=configuration; exit 
212 fi
213
214
215
216    # DETERMINE THE LOCAL HOST
217 local_host_real_name=$(hostname)
218# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
219
220
221
222    # DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
223 line=""
224 grep  "%host_identifier"  $config_file  >  $tmp_mbuild
225 while read line
226 do
227    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
228    then
229       HOSTNAME=`echo $line | cut -d" " -s -f2`
230       host_identifier=`echo $line | cut -d" " -s -f3`
231       if [[ $local_host_real_name = $HOSTNAME ]]
232       then
233          local_host=$host_identifier
234          break
235       fi
236    fi
237 done < $tmp_mbuild
238
239 if [[ "$local_host" = "" ]]
240 then
241    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
242    printf "\n      for local host \"$local_host_real_name\"."
243    printf "\n      Please add line"
244    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
245    printf "\n      to the configuration file."
246    locat=local_host; exit
247 fi
248
249
250
251 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
252 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
253
254
255
256 if [[ $local_host != ibms ]]
257 then
258    config_file=$PWD/$config_file
259 else
260    config_file=`pwd`/$config_file
261 fi
262
263
264    # determine the block conditions
265 if [[ $block_conditions != none ]]
266 then
267    block_condition1=`echo $block_conditions | cut -d" " -f1`
268    block_condition2=`echo $block_conditions | cut -d" " -f2`
269    if [[ "$block_condition2" = "$block_condition1" ]]
270    then
271       block_condition2=""
272    fi
273 fi
274
275 
276    # DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
277 line=""
278 grep  " $local_host" $config_file | grep "%remote_username"  >  $tmp_mbuild
279 while read line
280 do
281    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
282    then
283       local_username=`echo $line | cut -d" " -s -f2`
284    fi
285 done < $tmp_mbuild
286
287
288 if [[ "$local_username" = "" ]]
289 then
290    printf "\n  +++ no user name found in configuration file"
291    printf "\n      for local host \"$local_host\" "
292    locat=config_file; exit
293 fi
294
295
296    # DETERMINE LOCAL SOURCE-CODE PATH.
297    # FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
298    # THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
299    # BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
300 line=""
301 grep "%" $config_file  >  $tmp_mbuild
302 while read line
303 do
304    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
305    then
306       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
307       value=`echo $line | cut -d" " -s -f2`
308       eval export $var=\$value
309    fi
310 done < $tmp_mbuild
311
312    # NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
313 line=""
314 grep "%source_path" $config_file  >  $tmp_mbuild
315 while read line
316 do
317    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
318    then
319       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
320       then
321          global_source_path=`echo $line | cut -d" " -s -f2`
322       fi
323    fi
324 done < $tmp_mbuild
325
326 line=""
327 grep  " $local_host" $config_file | grep "%source_path"  >  $tmp_mbuild
328 while read line
329 do
330    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
331    then
332       local_source_path=`echo $line | cut -d" " -s -f2`
333    fi
334 done < $tmp_mbuild
335
336 if [[ "$local_source_path" = "" ]]
337 then
338    if [[ "$global_source_path" != "" ]]
339    then
340       local_source_path=$global_source_path
341    else
342       printf "\n  +++ no source path found in configuration file"
343       printf "\n      for local host \"$local_host\" "
344       printf "\n      please set \"\%source_path\" in configuration file"
345       locat=config_file; exit
346    fi
347 fi
348 eval local_source_path=$local_source_path
349 eval local_source_path=$local_source_path
350
351
352
353    # DETERMINE GLOBAL DEPOSITORY-PATH
354 line=""
355 grep "%depository_path" $config_file  >  $tmp_mbuild
356 while read line
357 do
358    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
359    then
360       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
361       then
362          global_depository_path=`echo $line | cut -d" " -s -f2`
363       fi
364    fi
365 done < $tmp_mbuild
366
367 if [[ $found = false ]]
368 then
369    printf "\n  +++ no \%depository_path found in" 
370    printf "\n                            $config_file"
371    locat=depository_path; exit
372  fi
373
374    # CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
375 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
376 then
377    printf "\n  +++ no main program or more than one main program defined"
378    printf "\n      in configuration file"
379    locat=configuration; exit
380 else
381    line=`grep "%mainprog" $config_file`
382    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
383    then
384       printf "\n  +++ no main program defined in configuration file"
385       locat=configuration; exit
386    fi
387    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
388 fi
389
390
391
392    # CHECK IF MAKEFILE EXITS
393 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
394 if [[ ! -f $makefile ]]
395 then
396    printf "\n  +++ makefile: "
397    printf "\n           $makefile"
398    printf "\n      does not exist"
399    locat=makefile; exit 
400 fi
401
402
403    # HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
404 calltime=$(date)
405 printf "\n"
406 printf "#------------------------------------------------------------------------# \n"
407 printf "| $version$calltime | \n"
408 printf "|                                                                        | \n"
409 column1="called on:"; column2=$local_host_real_name
410 printf "| $column1$column2 | \n"
411 column1="local username:"; column2=$local_username
412 printf "| $column1$column2 | \n"
413 column1="local IP-addres:"; column2=$local_addres
414 printf "| $column1$column2 | \n"
415 column1="config file:"; column2=$config_file
416 printf "| $column1$column2 | \n"
417 column1="makefile:"; column2=$makefile
418 printf "| $column1$column2 | \n"
419 column1="local source path:"; column2=$local_source_path
420 printf "| $column1$column2 | \n"
421 printf "#------------------------------------------------------------------------# \n"
422
423# printf "|                                                                        | \n"
424
425
426 if [[ $compile_utility_programs = false ]]
427 then
428
429       # IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
430       # WITH OVERWRITING FILES ON THE REMOTE HOST
431    cd  $local_source_path
432    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
433    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
434    printf "\n"
435
436 else
437    cd  $local_source_path
438    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
439 
440    cat Makefile_check|while read line
441    do
442       line=$(echo $line|grep RCS)
443       if [[ $line == *"RCS"* ]]
444       then
445          line=$(echo $line|sed 's/RCS = //g')
446          break
447       fi
448    done
449
450    tar -cf  ${mainprog}_sources_check.tar  Makefile_check  $line
451    printf "\n"
452 fi
453
454
455
456    # GET CONFIRMATION TO CONTINUE
457 if [[ $host = all ]]
458 then
459    printf "\n  *** updates will be made for ALL hosts found in"
460    printf "\n      the configuration file"
461 else
462    printf "\n  *** update will be made for host \"$host\" "
463 fi
464
465 if [[ $silent = false ]]
466 then
467    answer=dummy
468    printf "\n\n"
469    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
470    do
471       printf " >>> continue (y/n) ?  "
472       read  answer
473    done
474    if [[ $answer = n  ||  $answer = N ]]
475    then
476       locat=user_abort; exit
477    fi
478 fi
479 
480 
481
482   
483    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
484    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
485 printf "\n  *** scanning configuration file for host(s) ..."
486
487 grep  %fopts  $config_file  >  $tmp_mbuild
488 while read line
489 do
490       # KOMMENTARZEILEN UEBERSPRINGEN
491    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
492    (( ihost = ihost + 1 ))
493    hostline[$ihost]="$line"
494 done < $tmp_mbuild
495
496 
497 while (( ih < ihost ))
498 do
499
500    (( ih = ih + 1 ))
501
502       # determine remote host and conditions for the respective block
503       # continue, only if this host has been chosen via -h option and if
504       # conditions have been chosen via -K option
505    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
506    remote_host=`echo $remote_host_string | cut -d" " -f1`
507    if [[ $host != all ]]
508    then
509       [[ $remote_host != $host ]]  &&  continue
510    fi
511    host_found=true
512    condition1=`echo $remote_host_string | cut -d" " -s -f2`
513    if [[ $condition1 = $remote_host ]]
514    then
515       condition1=""
516    else
517       condition2=`echo $remote_host_string | cut -d" " -s -f3`
518    fi
519
520    if [[ $block_conditions != none ]]
521    then
522       if [[ "$condition1" != "$block_condition1"  || "$condition2" != "$block_condition2" ]]
523       then
524          continue
525       fi
526       block_conditions_found=true
527    fi
528
529    modules=""
530    netcdf_inc=""
531    netcdf_lib=""
532    make_options=""
533
534       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
535    case  $remote_host  in
536        (lckordi)        remote_adress=210.219.61.8;;
537        (lcmuk)          remote_addres=130.75.105.2;;
538        (lcrte)          remote_addres=133.5.185.60;;
539        (lcsgib)         remote_addres=130.73.232.102;;
540        (lcsgih)         remote_addres=130.75.4.101;;
541        (lck)            remote_addres=165.132.26.61;;
542        (lctit)          remote_addres=10.1.6.170;;
543        (lcxe6)          remote_addres=129.177.20.113;;
544        (lcxt5m)         remote_addres=193.166.211.144;;
545        (decalpha)       remote_addres=165.132.26.56;;
546        (ibmh)           remote_addres=136.172.40.15;;
547        (ibmkisti)       remote_addres=150.183.146.24;;
548        (ibmku)          remote_addres=133.5.4.129;;
549        (ibms)           remote_addres=150.183.5.101;;
550        (ibmy)           remote_addres=165.132.26.58;;
551        (nech)           remote_addres=136.172.44.192;;
552        (neck)           remote_addres=133.5.178.11;;
553        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
554        (*)              if [[ $local_host != $remote_host ]]
555                         then
556                            printf "\n  +++ remote host \"$remote_host\" unknown";
557                            printf "\n      please inform PALM group support!"
558                         fi;;
559    esac
560
561
562       # REMOTE-USERNAMEN ERMITTELN
563    line=""
564    found=false
565    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  $tmp_mbuild
566    while read line1
567    do
568
569       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
570       then
571          line="$line1"
572       fi
573
574       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
575       then
576          remote_username=`echo $line | cut -d" " -s -f2`
577          found=true
578       fi
579
580    done < $tmp_mbuild
581
582    if [[ $found = false ]]
583    then
584       printf "\n  +++ no remote username found in configuration file"
585       printf "\n      for \"$remote_host_string\" "
586       locat=config_file; exit
587    fi
588
589
590       # REMOTE-QUELLTEXTPFAD ERMITTELN
591    line=""
592    remote_source_path=""
593    grep  "$remote_host_string" $config_file | grep "%source_path"  >  $tmp_mbuild
594    while read line1
595    do
596
597       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
598       then
599          line="$line1"
600       fi
601
602       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
603       then
604          remote_source_path=`echo $line | cut -d" " -s -f2`
605       fi
606
607    done < $tmp_mbuild
608
609    if [[ "$remote_source_path" = "" ]]
610    then
611       if [[ "$global_source_path" != "" ]]
612       then
613          remote_source_path=$global_source_path
614       else
615          printf "\n  +++ no source path found in configuration file"
616          printf "\n      for \"$remote_host_string\" "
617          locat=config_file; exit
618       fi
619    fi
620
621    remote_ud=${remote_source_path}/../UTIL
622    remote_ud=$(eval echo $remote_ud)
623
624
625       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
626    remote_md=""
627    line=""
628    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  $tmp_mbuild
629    while read line1
630    do
631
632       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
633       then
634          line="$line1"
635       fi
636
637       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
638       then
639          remote_md=`echo $line | cut -d" " -s -f2`
640       fi
641
642    done < $tmp_mbuild
643
644    if [[ "$remote_md" = "" ]]
645    then
646       if [[ "$global_depository_path" != "" ]]
647       then
648          remote_md=$global_depository_path
649       else
650          printf "\n  +++ no depository path found in configuration file"
651          printf "\n      for \"$remote_host_string\" "
652          printf "\n      please set \"\%depository_path\" in configuration file"
653          locat=config_file; exit
654       fi
655    fi
656
657    remote_md=$(eval echo $remote_md)
658    block=""
659    [[ "$condition1" != "" ]]  &&  block=_$condition1
660    [[ "$condition2" != "" ]]  &&  block=${block}_$condition2
661    remote_md=${remote_md}$block
662
663
664       # COMPILERNAMEN ERMITTELN
665    line=""
666    found=false
667    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  $tmp_mbuild
668    while read line1
669    do
670
671       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
672       then
673          line="$line1"
674       fi
675
676       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
677       then
678          compiler_name=`echo $line | cut -d" " -s -f2`
679          found=true
680       fi
681
682    done < $tmp_mbuild
683
684    if [[ $found = false ]]
685    then
686       printf "\n  +++ no compiler name found in configuration file"
687       printf "\n      for \"$remote_host_string\" "
688       locat=config_file; exit
689    fi
690
691
692       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
693       # SERIELLER COMPILERNAME ERMITTELT WERDEN
694    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
695    then
696       line=""
697       found=false
698       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  $tmp_mbuild
699       while read line1
700       do
701
702          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
703          then
704             line="$line1"
705          fi
706
707          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
708          then
709             compiler_name_ser=`echo $line | cut -d" " -s -f2`
710             found=true
711          fi
712
713       done < $tmp_mbuild
714
715       if [[ $found = false ]]
716       then
717          printf "\n  +++ no serial compiler name found in configuration file"
718          printf "\n      for \"$remote_host_string\" "
719          locat=config_file; exit
720       fi
721    else
722       compiler_name_ser=$compiler_name
723    fi
724
725
726
727       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
728    line=""
729    found=false
730    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
731    while read line1
732    do
733
734       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
735       then
736          line="$line1"
737       fi
738
739       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
740       then
741             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
742          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
743          found=true
744       fi
745
746    done < $tmp_mbuild
747
748    if [[ $found = false ]]
749    then
750       printf "\n  +++ no preprocessor options found in configuration file"
751       printf "\n      for \"$remote_host_string\" "
752       locat=config_file; exit
753    fi
754
755
756       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
757    for  string  in  $remote_host_string
758    do
759       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
760       then
761          cpp_options="$cpp_options -D__lc "
762       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
763       then
764          cpp_options="${cpp_options},-D__ibm"
765       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
766       then
767          cpp_options="${cpp_options} -D__nec"
768       else
769          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
770          then
771             cpp_options="${cpp_options},-D__$string"
772          else
773             cpp_options="$cpp_options -D__$string "
774          fi
775       fi
776    done
777
778
779
780       # NETCDF-OPTIONEN ERMITTELN
781    line=""
782    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  $tmp_mbuild
783    while read line1
784    do
785
786       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
787       then
788          line="$line1"
789       fi
790
791       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
792       then
793             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
794          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
795       fi
796
797    done < $tmp_mbuild
798
799    line=""
800    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  $tmp_mbuild
801    while read line1
802    do
803
804       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
805       then
806          line="$line1"
807       fi
808
809       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
810       then
811             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
812          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
813       fi
814
815    done < $tmp_mbuild
816
817
818
819       # get make options
820    line=""
821    found=false
822    grep  "$remote_host_string" $config_file | grep "%mopts"  >  $tmp_mbuild
823    while read line1
824    do
825
826       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
827       then
828          line="$line1"
829       fi
830
831       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
832       then
833             # remove colons from directive string
834          make_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
835
836       fi
837
838    done < $tmp_mbuild
839
840
841
842       # COMPILEROPTIONEN ERMITTELN
843    line=""
844    found=false
845    grep  "$remote_host_string" $config_file | grep "%fopts"  >  $tmp_mbuild
846    while read line1
847    do
848
849       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
850       then
851          line="$line1"
852       fi
853
854       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
855       then
856             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
857          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
858          found=true
859
860             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
861          compiler_options="$compiler_options $netcdf_inc"
862       fi
863
864    done < $tmp_mbuild
865
866    if [[ $found = false ]]
867    then
868       printf "\n  +++ no compiler options found in configuration file"
869       printf "\n      for \"$remote_host_string\" "
870       locat=config_file; exit
871    fi
872
873
874       # get login init commands, "::" is replacing a space
875    line=""
876    grep  "$remote_host_string" $config_file | grep "%login_init_cmd"  >  $tmp_mbuild
877    while read line1
878    do
879
880       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
881       then
882          line="$line1"
883       fi
884
885       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
886       then
887             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
888          init_cmds=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
889       fi
890       init_cmds="${init_cmds};"
891    done < $tmp_mbuild
892
893
894       # get modules to be loaded
895    line=""
896    grep  "$remote_host_string" $config_file | grep "%modules"  >  $tmp_mbuild
897    while read line1
898    do
899
900       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
901       then
902          line="$line1"
903       fi
904
905       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
906       then
907             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
908          modules=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
909       fi
910
911    done < $tmp_mbuild
912
913
914       # LADER-OPTIONEN ERMITTELN
915    line=""
916    found=false
917    grep  "$remote_host_string" $config_file | grep "%lopts"  >  $tmp_mbuild
918    while read line1
919    do
920
921       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
922       then
923          line="$line1"
924       fi
925
926       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
927       then
928             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
929          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
930          found=true
931
932             # NETCDF-LIBRARY HINZUFUEGEN
933          loader_options="$loader_options $netcdf_lib"
934       fi
935
936    done < $tmp_mbuild
937
938    if [[ $found = false ]]
939    then
940       printf "\n  +++ no loader options found in configuration file"
941       printf "\n      for \"$remote_host_string\" "
942       locat=config_file; exit
943    fi
944
945
946    printf "\n\n#------------------------------------------------------------------------# \n"
947    if [[ $remote_host = $local_host ]]
948    then
949       column1="remote_host:"; column2="$remote_host (= local host!)"
950    else
951       column1="remote_host:"; column2=$remote_host
952    fi
953    printf "| $column1$column2 | \n"
954    printf "|                                                                        | \n"
955    column1="conditions:"; column2="$condition1 $condition2"
956    printf "| $column1$column2 | \n"
957    column1="make depository:"; column2=$remote_md
958    printf "| $column1$column2 | \n"
959    line=$(echo "$remote_md" | cut -c51-)
960    while [[ "$line" != "" ]]
961    do
962       column1=""
963       column2=$line
964       printf "| $column1$column2 | \n"
965       line=$(echo "$line" | cut -c51-)
966    done
967    if [[ $compile_utility_programs = true ]]
968    then
969       column1="utility directory:"; column2=$remote_ud
970       printf "| $column1$column2 | \n"
971    fi
972    column1="username:"; column2=$remote_username
973    printf "| $column1$column2 | \n"
974    column1="addres:"; column2=$remote_addres
975    printf "| $column1$column2 | \n"
976    column1="compiler:"; column2=$compiler_name
977    printf "| $column1$column2 | \n"
978    if [[ $compile_utility_programs = true ]]
979    then
980       column1="serial compiler:"; column2=$compiler_name_ser
981       printf "| $column1$column2 | \n"
982    fi
983    if [[ "$make_options" != "" ]]
984    then
985       column1="make options:"; column2=$make_options
986       printf "| $column1$column2 | \n"
987    fi
988    column1="cpp options:"; column2=$cpp_options
989    printf "| $column1$column2 | \n"
990    line=$(echo "$cpp_options" | cut -c51-)
991    while [[ "$line" != "" ]]
992    do
993       column1=""
994       column2=$line
995       printf "| $column1$column2 | \n"
996       line=$(echo "$line" | cut -c51-)
997    done
998    column1="compiler options:"; column2=$compiler_options
999    printf "| $column1$column2 | \n"
1000    line=$(echo "$compiler_options" | cut -c51-)
1001    while [[ "$line" != "" ]]
1002    do
1003       column1=""
1004       column2=$line
1005       printf "| $column1$column2 | \n"
1006       line=$(echo "$line" | cut -c51-)
1007    done
1008    column1="loader options:"; column2=$loader_options
1009    printf "| $column1$column2 | \n"
1010    line=$(echo "$loader_options" | cut -c51-)
1011    while [[ "$line" != "" ]]
1012    do
1013       column1=""
1014       column2=$line
1015       printf "| $column1$column2 | \n"
1016       line=$(echo "$line" | cut -c51-)
1017    done
1018    if [[ $modules != "" ]]
1019    then
1020       column1="modules to be load:"; column2=$modules
1021       printf "| $column1$column2 | \n"
1022       line=$(echo "$modules" | cut -c51-)
1023       while [[ "$line" != "" ]]
1024       do
1025          column1=""
1026          column2=$line
1027          printf "| $column1$column2 | \n"
1028          line=$(echo "$line" | cut -c51-)
1029       done
1030    fi
1031    printf "#------------------------------------------------------------------------# \n"
1032
1033    if [[ $silent = false ]]
1034    then
1035       answer=dummy
1036       printf "\n\n"
1037       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
1038       do
1039          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
1040          read  answer
1041       done
1042       if [[ $answer = a  ||  $answer = A ]]
1043       then
1044          locat=user_abort; exit
1045       fi
1046       if [[ $answer = c  ||  $answer = C ]]
1047       then
1048          silent=true
1049       fi
1050       if [[ $answer = s  ||  $answer = S ]]
1051       then
1052          continue
1053       fi
1054    fi
1055
1056
1057       # make on remote host
1058    if [[ $remote_host != $local_host ]]
1059    then
1060       if [[ $compile_utility_programs = false ]]
1061       then
1062
1063             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1064             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1065          echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1066          if [[ $remote_host != lctit ]]
1067          then
1068             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1069          else
1070                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1071                # MIT SSH, DESHALB AUFRUF PER PIPE
1072             print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1073          fi
1074          if [[ $local_host = decalpha ]]
1075          then
1076                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1077                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1078                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1079             remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1080             /bin/scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1081          else
1082             scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1083          fi
1084
1085
1086
1087             # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1088          echo "  *** untar previous update on remote host, if existing"
1089          if [[ $remote_host != lctit ]]
1090          then
1091             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1092          else
1093                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1094                # MIT SSH, DESHALB AUFRUF PER PIPE
1095             print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1096          fi
1097
1098
1099             # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1100          echo "  *** untar actual sources on remote host"
1101          if [[ $remote_host != lctit ]]
1102          then
1103             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1104          else
1105                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1106                # MIT SSH, DESHALB AUFRUF PER PIPE
1107             print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1108          fi
1109
1110
1111             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1112             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1113             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1114             # Z.B. DIE PFADE ZUM COMPILER)
1115          echo "  *** execute \"make\" on remote host"
1116
1117
1118             # generate make call with make options
1119          if [[ $remote_host = nech ]]
1120          then
1121             make_call_string="sxmake  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1122          else
1123             make_call_string="make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1124          fi
1125
1126             # generate command to load modules, if modules are given
1127          if [[ "$modules" != "" ]]
1128          then
1129             if [[ $remote_host = lctit ]]
1130             then
1131                module_calls=". $modules"
1132             else
1133                module_calls="module load ${modules};"
1134             fi
1135
1136                # bugfix for wrong netcdf module
1137             if [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1138             then
1139                if [[ $(echo $module_calls | grep -c netcdf/3.6.3-intel) != 0 ]]
1140                then
1141                   module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1142                fi
1143             fi
1144          else
1145             module_calls=""
1146          fi
1147
1148          if [[ $remote_host = ibmkisti  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1149          then
1150
1151             ssh  ${remote_username}@${remote_addres}  "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1152
1153          elif [[ $remote_host = ibmh ]]
1154          then
1155
1156             print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1157
1158          elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1159          then
1160#             print ". /usr/share/modules/init/bash; $module_calls  cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1161             print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1162
1163          elif [[ $remote_host = lctit ]]
1164          then
1165
1166             echo  " "  >  ${remote_host}_last_make_protokoll
1167             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1168             do
1169                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1170             done
1171
1172          elif [[ $remote_host = lcxe6 ]]
1173          then
1174
1175             ssh  ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1176
1177          else
1178
1179             print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1180
1181          fi
1182
1183          if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1184          then
1185             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1186             if [[ $silent = false ]]
1187             then
1188                answer=dummy
1189                printf "\n"
1190                while [[ "$answer" != c  &&  "$answer" != k ]]
1191                do
1192                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1193                   read  answer
1194                   if [[ "$answer" = l ]]
1195                   then
1196                      more ${remote_host}_last_make_protokoll
1197                   fi
1198                done
1199                if [[ $answer = k ]]
1200                then
1201                   locat=user_abort; exit
1202                fi
1203             fi
1204          fi
1205
1206
1207
1208             # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1209          printf "\n  *** tar update on remote host ..."
1210          if [[ $remote_host != lctit ]]
1211          then
1212             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
1213          else
1214                # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1215                # MIT SSH, DESHALB AUFRUF PER PIPE
1216             print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1217          fi
1218
1219
1220             # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1221#          printf "\n  *** \"make clean\" on remote host ..."
1222#          ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1223#          printf "\n"
1224
1225
1226
1227
1228          # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1229          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1230          # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1231       elif [[ $compile_utility_programs = true ]]
1232       then
1233
1234          printf "\n\n"
1235          echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1236          cd  ${local_source_path}/../SCRIPTS
1237
1238          if [[ $remote_host != lctit ]]
1239          then
1240             ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1241          else
1242                # TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1243                # MIT SSH, DESHALB AUFRUF PER PIPE
1244             print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1245          fi
1246
1247             # KOPIEREN DER SCRIPTE
1248          if [[ $local_host = decalpha ]]
1249          then
1250                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1251                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1252                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1253             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1254             /bin/scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1255          else
1256             scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1257          fi
1258
1259          cd  -  > /dev/null
1260          cd  ${local_source_path}/../UTIL
1261
1262
1263             # KOPIEREN DER UTILITY-PROGRAMME
1264          if [[ $local_host = decalpha ]]
1265          then
1266                # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1267                # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1268                # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1269             remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1270             /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1271          else
1272             scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1273          fi
1274
1275
1276
1277             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1278             # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1279             # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1280             # Z.B. DIE PFADE ZUM COMPILER)
1281          echo "  *** execute \"make\" on remote host"
1282
1283          if [[ $remote_host = nech ]]
1284          then
1285             make_call_string="sxmake  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1286          else
1287             make_call_string="make  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1288          fi
1289
1290             # generate command to load modules, if modules are given
1291          if [[ "$modules" != "" ]]
1292          then
1293             if [[ $remote_host = lctit ]]
1294             then
1295                module_calls=". $modules"
1296             else
1297                module_calls="module load ${modules};"
1298             fi
1299
1300                # bugfix for wrong netcdf module
1301             if [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1302             then
1303                if [[ $(echo $module_calls | grep -c netcdf/3.6.3-intel) != 0 ]]
1304                then
1305                   module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1306                fi
1307             fi
1308          else
1309             module_calls=""
1310          fi
1311
1312
1313          if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1314          then
1315
1316             ssh  ${remote_username}@${remote_addres}  "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1317
1318          elif [[ $remote_host = ibmh ]]
1319          then
1320
1321             print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1322
1323          elif [[ $remote_host = lctit ]]
1324          then
1325
1326             echo  " "  >  ${remote_host}_last_make_protokoll
1327             while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1328             do
1329                print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1330             done
1331
1332          elif [[ $remote_host = lcxe6 ]]
1333          then
1334
1335             ssh  ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1336
1337          else
1338
1339             print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1340
1341          fi
1342
1343       fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1344
1345       rm -rf  ${remote_host}_last_make_protokoll
1346
1347       # make on local host
1348    else
1349
1350          # workaround for lcxe6
1351       if [[ $remote_host = lcxe6 ]]
1352       then
1353
1354          eval $init_cmds
1355
1356       fi
1357
1358       # first load modules, if given
1359       if [[ "$modules" != "" ]]
1360       then
1361          if [[ $remote_host = lctit ]]
1362          then
1363             . $modules
1364          else
1365             module load ${modules}
1366          fi
1367       fi
1368
1369
1370       if [[ $compile_utility_programs = false ]]
1371       then
1372
1373             # DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1374          eval remote_md=$remote_md
1375          if [[ ! -d $remote_md ]]
1376          then
1377             if  mkdir $remote_md
1378             then
1379                printf "\n\n  *** directory for make depository:"
1380                printf "\n           $remote_md"
1381                printf "\n      was created\n"
1382             else
1383                printf "\n  +++ directory for make depository:"
1384                printf "\n           $remote_md"
1385                printf "\n      cannot be created"
1386                locat=local_depository_path; exit
1387             fi
1388          fi
1389
1390             # QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1391          echo " "
1392          echo "  *** updating sources in $remote_md"
1393          cd  $remote_md
1394          cp  $local_source_path/${mainprog}_sources.tar  .
1395          tar xf  ${mainprog}_sources.tar
1396
1397             # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1398          echo " "
1399          echo "  *** execute \"make\" on local host"
1400
1401          make  $make_options  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1402
1403          if [[ $? != 0 ]]
1404          then
1405             printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1406             if [[ $silent = false ]]
1407             then
1408                answer=dummy
1409                printf "\n"
1410                while [[ "$answer" != c  &&  "$answer" != k ]]
1411                do
1412                   printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1413                   read  answer
1414                   if [[ "$answer" = l ]]
1415                   then
1416                      more ${remote_host}_last_make_protokoll
1417                   fi
1418                done
1419                if [[ $answer = k ]]
1420                then
1421                   locat=user_abort; exit
1422                fi
1423             fi
1424          fi
1425
1426
1427             # TAR NEW VERSION ON LOCAL HOST
1428          printf "\n  *** tar update on local host ..."
1429          tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1430
1431
1432          # COMPILE THE UTILITY PROGRAMS
1433       elif [[ $compile_utility_programs = true ]]
1434       then
1435          printf "\n\n"
1436          echo "  *** compiling the utility programs ..."
1437          cd ${local_source_path}/../UTIL
1438
1439             # TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1440          touch  *.f90
1441          make  $make_options  BLOCK=$block  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1442
1443             # CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1444          if [[ $util_compiled_localhost == false ]]
1445          then
1446             printf "\n\n"
1447             echo "  *** compiling the mrun GUI"
1448             if which qmake >/dev/null; then
1449                cd mrungui
1450                touch *
1451                qmake
1452                make
1453                make clean
1454                rm Makefile
1455                cd ..
1456             else
1457                echo "  +++ no qmake found. The (optional) GUI will not be compiled."
1458             fi
1459
1460             # COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1461
1462             printf "\n\n"
1463             echo "  *** compiling check_namelist_files ..."
1464
1465             # GET CHECK OPTIONS
1466             line=""
1467             found=false
1468             grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
1469             while read line1
1470             do
1471
1472                if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1473                then
1474                   line="$line1"
1475                fi
1476
1477                if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1478                then
1479                   # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1480                   line="$line "
1481                   copts_check=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g' | sed 's/-D[^ ]* //g' | sed 's/ -D.*//g'`
1482                   found=true
1483                fi
1484
1485             done < $tmp_mbuild
1486             copts_check="$copts_check -D__check -D__parallel"
1487
1488             check_depository_path=${local_source_path}/../UTIL
1489             cd $check_depository_path
1490             mkdir check_tmp
1491             cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1492             cd check_tmp
1493             tar -xf  ${mainprog}_sources_check.tar
1494             rm -rf ${mainprog}_sources_check.tar
1495
1496             make  -f Makefile_check $make_options  F90=$compiler_name_ser  COPT="$copts_check"  F90FLAGS="$compiler_options"
1497             tar -cf  check_namelist_files.tar Makefile_check check_namelist_files.x *.f90 *.o *.mod
1498             mv check_namelist_files.tar $check_depository_path
1499             mv check_namelist_files.x $PALM_BIN
1500             cd $check_depository_path
1501             rm -rf check_tmp
1502             util_compiled_localhost=true
1503          else
1504             cd $check_depository_path
1505             printf "\n\n"
1506             echo "  *** skipped compilation of mrun GUI."       
1507             printf "\n\n"
1508             echo "  *** skipped compilation of check_namelist_files."           
1509          fi
1510
1511       fi
1512    fi
1513 done
1514
1515
1516 if [[ $host_found = false ]]
1517 then
1518    if [[ $host = all ]]
1519    then
1520       printf "\n  +++ no hosts found in configuration file"
1521    else
1522       printf "\n  +++ host \"$host\" not found in configuration file"
1523    fi
1524    locat=config_file; exit
1525 fi
1526
1527 if [[ "$block_conditions" != none  &&  $block_conditions_found = false ]]
1528 then
1529    printf "\n  +++ block conditions \"$block_conditions\" not found for host \"$host\""
1530 fi
1531
1532
1533    # FINAL WORK
1534 rm -f  hosts_found_in_config_file
1535 rm -f ${local_source_path}/${mainprog}_sources_check.tar
1536
Note: See TracBrowser for help on using the repository browser.