Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 44

Last change on this file since 44 was 40, checked in by raasch, 18 years ago
documentation update for the new svn-based version and for 3.1c, update of .mrun.config.default, -u in mbuild only compiles scripts
File size: 54.6 KB

Rev	Line
[1]	1	#!/bin/ksh
[40]	2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 02/03/07
[1]	3
	4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	6	# Rechner
	7
	8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	9	# verwendet wird:
	10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	11	# nach aussen weitergegeben. "while read line" funktioniert nicht
	12	# innerhalb einer Pipe.
	13
	14	# letzte Aenderung:
	15	# 06/05/02 - Siggi - Beginn der Entwicklung
	16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	20	# benutzt wird
	21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	22	# 19/12/02 - Siggi - ibmb validiert
	23	# 05/02/03 - Siggi - hostname nobela included
	24	# 04/03/03 - Siggi - host nech included
	25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	26	# file LAST_MAKE_CALL (otherwise error on NEC, because
	27	# '' are part of compiler options
	28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	29	# string, in case that palm.f90 version contains
	30	# such strings
	31	# 16/04/03 - Siggi - First extensions for linux machines
	32	# 24/06/03 - Siggi - host orkan included
	33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	34	# 24/07/03 - Siggi - host maestro admitted
	35	# 06/08/03 - Siggi - host gregale admitted
	36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	39	# (-D$OMP=OMP) in order to avoid problems with
	40	# OMP_NUM_THREADS
	41	# 09/01/04 - Siggi - action above cancelled
	42	# 28/01/04 - Siggi - action above re-cancelled
	43	# 08/03/04 - Siggi - host scirocco admitted
	44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	45	# the respective .f90 file is not listed in the makefile
	46	# and deletion is demanded by the user
	47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	48	# due to error in ssh installation (otherwise a prompt
	49	# for the password appears)
	50	# 23/07/04 - Siggi - changes due to the new berni configuration
	51	# (federation switch)
	52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	56	# 24/04/05 - Siggi - netcdf support on lcmuk
	57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	58	# 12/05/05 - Siggi - netcdf support on ibm
	59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	60	# 18/05/05 - Siggi - netcdf support on nec
	61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	62	# 23/05/05 - Siggi - netcdf support on ibms
	63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	64	# 30/06/05 - Siggi - netcdf support on bora
	65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	68	# host gfdl5 (ibmy) admitted
	69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	70	# 20/01/06 - Siggi - cpp directive for ibmy
	71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	72	# 10/02/06 - Siggi - modifications for scp on decalpha
	73	# 13/04/06 - Siggi - ostria admitted
	74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	76	# 29/05/05 - Siggi - atmos (lcide) admitted
	77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	78	# 24/11/06 - Siggi - breva and levanto admitted
	79	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	80	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	81	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	82	# scripts to remote hosts added (option -u)
[1]	83
	84
	85
	86	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	87	compile_utility_programs=false
[1]	88	config_file=.mrun.config
	89	host=all
	90	host_found=false
	91	ibm_hb_done=false
	92	lcmuk_done=false
	93	locat=normal
	94	makefile=""
	95	remote_mode=interactive
	96	scirocco=false
	97	silent=false
	98	suf=f90
	99	update=false
	100
	101	typeset -i ih ihost=0
	102
	103	typeset -R50 calltime
	104	typeset -L20 column1
	105	typeset -L50 column2
	106	typeset -L70 column3
	107	typeset -L20 version="MBUILD 1.0"
	108
	109	# FEHLERBEHANDLUNG
	110	# BEI EXIT:
	111	trap 'if [[ $locat != normal ]]
	112	then
	113	printf "\n\n +++ mbuild killed \n\n"
	114	else
	115	printf "\n\n *** mbuild finished \n\n"
	116	fi' exit
	117
	118
	119	# BEI TERMINAL-BREAK:
	120	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
	121	exit
	122	' 2
	123
	124
	125
	126	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	127	while getopts :c:h:m:rs:u option
[1]	128	do
	129	case $option in
	130	(c) config_file=$OPTARG;;
	131	(h) host=$OPTARG;;
	132	(m) makefile=$OPTARG;;
	133	(r) remote_mode=batch;;
	134	(s) suf=$OPTARG;;
[22]	135	(u) compile_utility_programs=true;;
[1]	136	(\?) printf "\n +++ unknown option $OPTARG \n";
	137	locat=parameter; exit;;
	138	esac
	139	done
	140
	141
	142
	143	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	144	if [[ $remote_mode = batch ]]
	145	then
	146	printf "\n +++ sorry, batch mode does not work! \n"
	147	locat=parameter; exit
	148	fi
	149
	150
	151
	152	# LOKALEN RECHNER ERMITTELN
	153	local_host_real_name=$(hostname)
	154	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	155	case $local_host_real_name in
	156	(atmos) local_host=lcide;;
	157	(berte) local_host=t3eb;;
	158	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
	159	(gate) local_host=neck;;
	160	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
	161	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
	162	(gwdk081.gwdg.de) local_host=ibm;;
	163	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
	164	(nobel\|nobela) local_host=ibms;;
	165	(tgg*) local_host=lctit;;
	166	(t3e) local_host=t3eh;;
	167	(zam003) local_host=t3ej2;;
	168	(zam005) local_host=t3ej5;;
	169	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
	170	locat=local_host; exit;;
	171	esac
	172
	173	[[ $local_host_real_name = scirocco ]] && scirocco=true
	174
	175
	176
	177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	178	if [[ ! -f $config_file ]]
	179	then
	180	printf "\n +++ configuration file: "
	181	printf "\n $config_file"
	182	printf "\n does not exist"
	183	locat=configuration; exit
	184	fi
	185	if [[ $local_host != ibms ]]
	186	then
	187	config_file=$PWD/$config_file
	188	else
	189	config_file=`pwd`/$config_file
	190	fi
	191
	192
	193
	194	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	195	line=""
	196	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
	197	do
	198	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
	199	then
	200	local_username=`echo $line \| cut -d" " -s -f2`
	201	fi
	202	done
	203
	204	if [[ "$local_username" = "" ]]
	205	then
	206	printf "\n +++ no user name found in configuration file"
	207	printf "\n for local host \"$local_host\" "
	208	locat=config_file; exit
	209	fi
	210
	211
[5]	212	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	213	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	214	# VEREINBART WURDE.
	215	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	216	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	217	line=""
	218	grep "%" $config_file \| while read line
	219	do
	220	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
[1]	221	then
[5]	222	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	223	value=`echo $line \| cut -d" " -s -f2`
[8]	224	eval export $var=\$value
[9]	225	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	226	fi
[5]	227	done
[1]	228
[5]	229	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	230	line=""
	231	grep "%source_path" $config_file \| while read line
	232	do
	233	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	234	then
	235	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	236	then
	237	global_source_path=`echo $line \| cut -d" " -s -f2`
	238	fi
	239	fi
	240	done
	241
	242	line=""
	243	grep " $local_host" $config_file \| grep "%source_path" \| while read line
	244	do
	245	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	246	then
	247	local_source_path=`echo $line \| cut -d" " -s -f2`
	248	fi
	249	done
	250
	251	if [[ "$local_source_path" = "" ]]
	252	then
	253	if [[ "$global_source_path" != "" ]]
	254	then
	255	local_source_path=$global_source_path
	256	else
	257	printf "\n +++ no source path found in configuration file"
	258	printf "\n for local host \"$local_host\" "
	259	printf "\n please set \"\%source_path\" in configuration file"
	260	locat=config_file; exit
	261	fi
	262	fi
	263	eval local_source_path=$local_source_path
[8]	264	eval local_source_path=$local_source_path
[1]	265
	266
	267	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
	268	line=""
	269	grep "%depository_path" $config_file \| while read line
	270	do
	271	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	272	then
	273	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	274	then
	275	global_depository_path=`echo $line \| cut -d" " -s -f2`
	276	fi
	277	fi
	278	done
	279
	280	line=""
	281	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
	282	do
	283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	284	then
	285	local_depository_path=`echo $line \| cut -d" " -s -f2`
	286	fi
	287	done
	288
	289	if [[ "$local_depository_path" = "" ]]
	290	then
	291	if [[ "$global_depository_path" != "" ]]
	292	then
	293	local_depository_path=$global_depository_path
	294	else
	295	printf "\n +++ no depository path found in configuration file"
	296	printf "\n for local host \"$local_host\" "
	297	printf "\n please set \"\%depository_path\" in configuration file"
	298	locat=config_file; exit
	299	fi
	300	fi
	301	eval local_depository_path=$local_depository_path
[8]	302	eval local_depository_path=$local_depository_path
[1]	303
	304
	305
[5]	306	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	307	# VEREINBART WURDE
	308	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	309	then
	310	printf "\n +++ no main program or more than one main program defined"
	311	printf "\n in configuration file"
	312	locat=configuration; exit
	313	else
	314	line=`grep "%mainprog" $config_file`
	315	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	316	then
	317	printf "\n +++ no main program defined in configuration file"
	318	locat=configuration; exit
	319	fi
	320	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	321	fi
	322
	323
	324
[1]	325	# MAKEFILE vorhanden
	326	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	327	if [[ ! -f $makefile ]]
	328	then
	329	printf "\n +++ makefile: "
	330	printf "\n $makefile"
	331	printf "\n does not exist"
	332	locat=makefile; exit
	333	fi
	334
	335
	336	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	337	calltime=$(date)
	338	printf "\n"
	339	printf "#------------------------------------------------------------------------# \n"
	340	printf "\| $version$calltime \| \n"
	341	printf "\| \| \n"
	342	column1="called on:"; column2=$local_host_real_name
	343	printf "\| $column1$column2 \| \n"
	344	column1="local username:"; column2=$local_username
	345	printf "\| $column1$column2 \| \n"
	346	column1="local IP-addres:"; column2=$local_addres
	347	printf "\| $column1$column2 \| \n"
	348	column1="config file:"; column2=$config_file
	349	printf "\| $column1$column2 \| \n"
	350	column1="makefile:"; column2=$makefile
	351	printf "\| $column1$column2 \| \n"
	352	column1="local source path:"; column2=$local_source_path
	353	printf "\| $column1$column2 \| \n"
	354	column1="make depository:"; column2=$local_depository_path
	355	printf "\| $column1$column2 \| \n"
	356	printf "#------------------------------------------------------------------------# \n"
	357
	358	# printf "\| \| \n"
	359
	360
[40]	361	if [[ $compile_utility_programs = false ]]
	362	then
[1]	363
[40]	364	cd $local_source_path
[1]	365
	366
[40]	367	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
	368	source_code_files=`ls -1 *.$suf`
[1]	369
	370
[40]	371
	372	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
	373	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
	374	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
	375	if [[ ! -d $local_depository_path ]]
[1]	376	then
[40]	377	if mkdir $local_depository_path
	378	then
	379	printf "\n\n *** directory for make depository:"
	380	printf "\n $local_depository_path"
	381	printf "\n was created\n"
[1]	382
[40]	383	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
	384	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
	385	printf "\n *** makefile and source code files are copied to"
	386	printf "\n $local_depository_path\n"
	387	printf "\n copying makefile \"$makefile\" ..."
	388	cp -p $makefile $local_depository_path/Makefile
[1]	389
[40]	390	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
	391	# SEIN
	392	for filename in $source_code_files
	393	do
	394	if [[ $(grep -c $filename $makefile) = 0 ]]
	395	then
	396	printf "\n +++ source code file:"
	397	printf "\n $filename"
	398	printf "\n is not listed in makefile"
	399	locat=makefile; exit
	400	else
	401	printf "\n copying source code file \"$filename\" ..."
	402	cp -p $filename $local_depository_path
	403	fi
	404	done
	405	printf "\n"
	406	else
	407	printf "\n +++ directory for make depository:"
	408	printf "\n $local_depository_path"
	409	printf "\n cannot be created"
	410	locat=local_depository_path; exit
	411	fi
	412	else
	413
	414	printf "\n *** checking file status ..."
	415
	416	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
	417	if [[ $makefile -nt $local_depository_path/Makefile ]]
	418	then
	419	printf "\n *** update of \"$makefile\" "
	420	cp -f -p $makefile $local_depository_path/Makefile
	421	update=true
	422
	423	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
	424	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
	425	cd $local_depository_path
	426	source_code_files_in_depository=`ls -1 *.$suf`
	427	for filename in $source_code_files_in_depository
	428	do
	429	if [[ $(grep -c $filename Makefile) = 0 ]]
	430	then
	431	printf "\n *** source code file in \"$local_depository_path\":"
	432	printf "\n $filename"
	433	printf "\n is not listed in makefile"
	434	if [[ $silent = false ]]
	435	then
	436	answer=dummy
	437	printf "\n\n"
	438	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	439	do
	440	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
	441	read answer
	442	done
	443	if [[ $answer = y \|\| $answer = Y ]]
	444	then
	445	base=`echo $filename \| cut -d. -f2`
	446	rm -f $filename
	447	rm -f ${base}.o ${base}.mod
	448	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
	449	else
	450	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
	451	fi
	452	fi
	453	fi
	454	done
	455	cd - > /dev/null 2>&1
	456
	457	elif [[ $local_depository_path/Makefile -nt $makefile ]]
	458	then
	459	printf "\n *** makefile in depository is newer than"
	460	printf "\n \"$makefile\" "
	461	if [[ $silent = false ]]
	462	then
	463	answer=dummy
	464	printf "\n\n"
	465	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	466	do
	467	printf " >>> update \"$makefile\" (y/n) ? "
	468	read answer
	469	done
	470	if [[ $answer = y \|\| $answer = Y ]]
	471	then
	472	cp -f -p $local_depository_path/Makefile $makefile
	473	printf "\n *** \"$makefile\" updated"
	474	else
	475	printf "\n *** \"$makefile\" not updated"
	476	fi
	477	fi
	478	fi
	479
	480	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
	481	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
[1]	482	for filename in $source_code_files
	483	do
	484	if [[ $(grep -c $filename $makefile) = 0 ]]
	485	then
	486	printf "\n +++ source code file:"
	487	printf "\n $filename"
	488	printf "\n is not listed in makefile"
	489	locat=makefile; exit
	490	else
[40]	491	if [[ ! -f $local_depository_path/$filename ]]
	492	then
	493	cp -p $filename $local_depository_path
	494	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
	495	fi
	496	if [[ $filename -nt $local_depository_path/$filename ]]
	497	then
	498	printf "\n *** update of source code file \"$filename\" "
	499	cp -f -p $filename $local_depository_path
	500	update=true
	501	fi
[1]	502	fi
	503	done
	504
	505
[40]	506	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
	507	# ODER EVTL. NEUEREN DATUMS SIND
[1]	508	cd $local_depository_path
	509	source_code_files_in_depository=`ls -1 *.$suf`
[40]	510	cd - > /dev/null 2>&1
[1]	511	for filename in $source_code_files_in_depository
	512	do
[40]	513	if [[ ! -f $filename ]]
[1]	514	then
[40]	515	printf "\n *** source code file \"$filename\" does not exist in current directory"
[1]	516	if [[ $silent = false ]]
	517	then
	518	answer=dummy
	519	printf "\n\n"
	520	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	521	do
[40]	522	printf " >>> create \"$filename\" in current directory (y/n) ? "
[1]	523	read answer
	524	done
	525	if [[ $answer = y \|\| $answer = Y ]]
	526	then
[40]	527	cp -p $local_depository_path/$filename $filename
	528	printf "\n *** source code file \"$filename\" created in current directory"
[1]	529	else
[40]	530	printf "\n *** source code file \"$filename\" not created in current directory"
[1]	531	fi
	532	fi
[40]	533	elif [[ $local_depository_path/$filename -nt $filename ]]
[1]	534	then
[40]	535	ls -al $local_depository_path/$filename
	536	ls -al $filename
	537	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
	538	if [[ $silent = false ]]
[1]	539	then
[40]	540	answer=dummy
	541	printf "\n\n"
	542	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	543	do
	544	printf " >>> update \"$filename\" in current directory (y/n) ? "
	545	read answer
	546	done
	547	if [[ $answer = y \|\| $answer = Y ]]
	548	then
	549	cp -f -p $local_depository_path/$filename $filename
	550	printf "\n *** source code file \"$filename\" updated in current directory"
	551	else
	552	printf "\n *** source code file \"$filename\" not updated in current directory"
	553	fi
[1]	554	fi
	555	fi
[40]	556	done
	557
	558	if [[ $update = false ]]
[1]	559	then
[40]	560	printf "\n *** no updates necessary in \"$local_depository_path\" "
[1]	561	if [[ $silent = false ]]
	562	then
	563	answer=dummy
	564	printf "\n\n"
	565	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	566	do
[40]	567	printf " >>> continue with updates on remote hosts (y/n) ? "
[1]	568	read answer
	569	done
[40]	570	if [[ $answer = n \|\| $answer = N ]]
[1]	571	then
[40]	572	locat=user_abort; exit
[1]	573	fi
	574	fi
	575	fi
	576	fi
	577
	578
	579
[40]	580	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
	581	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	582	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
	583	printf "\n\n *** tar of makefile and source files in depository ..."
	584	cd $local_depository_path
	585	chmod u+w Makefile *.$suf
	586	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	587	printf "\n"
[1]	588
[40]	589	fi
[1]	590
	591
[40]	592
[1]	593	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	594	if [[ $host = all ]]
	595	then
	596	printf "\n *** updates will be made for ALL hosts found in"
	597	printf "\n the configuration file"
	598	else
	599	printf "\n *** update will be made for host \"$host\" "
	600	fi
	601
	602	if [[ $silent = false ]]
	603	then
	604	answer=dummy
	605	printf "\n\n"
	606	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	607	do
	608	printf " >>> continue (y/n) ? "
	609	read answer
	610	done
	611	if [[ $answer = n \|\| $answer = N ]]
	612	then
	613	locat=user_abort; exit
	614	fi
	615	fi
	616
	617
	618
	619
	620	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	621	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	622	printf "\n *** scanning configuration file for host(s) ..."
	623
	624	grep %fopts $config_file \| while read line
	625	do
	626	# KOMMENTARZEILEN UEBERSPRINGEN
	627	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	628	(( ihost = ihost + 1 ))
	629	hostline[$ihost]="$line"
	630	done
	631
	632
	633	while (( ih < ihost ))
	634	do
	635
	636	(( ih = ih + 1 ))
	637
	638	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	639	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	640	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	641	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	642	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	643	if [[ $host != all ]]
	644	then
	645	[[ $remote_host != $host ]] && continue
	646	fi
	647	host_found=true
	648	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	649	if [[ $condition1 = $remote_host ]]
	650	then
	651	condition1=""
	652	else
	653	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	654	fi
	655
	656
	657	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	658	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	659	then
	660	if [[ $ibm_hb_done = true ]]
	661	then
	662	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	663	printf "\n been carried out on one of the HLRN machines\n"
	664	continue
	665	fi
	666	fi
	667
	668	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	669	if [[ $remote_host = lcmuk ]]
	670	then
	671	if [[ $lcmuk_done = true ]]
	672	then
	673	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	674	printf "\n been carried out on this host\n"
	675	continue
	676	fi
	677	fi
	678
	679
	680	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	681	netcdf_support=false
	682	case $remote_host in
	683	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
	684	netcdf_support=true
	685	if [[ $scirocco = true ]]
	686	then
	687	netcdf_path=/opt/netcdf/3.6.2-beta4
	688	else
	689	netcdf_path=/muksoft/packages/netcdf/linux
	690	fi;;
	691	(lctit) remote_addres=172.17.75.161; netcdf_support=true
	692	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
	693	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
	694	netcdf_path=/usr/local/netcdf-3.5.1;;
	695	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
	696	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	697	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
	698	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	699	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
	700	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	701	netcdf_path=/applic/lib/NETCDF64;;
	702	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
	703	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
	704	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
	705	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
	706	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
	707	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
	708	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
	709	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
	710	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
	711	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
	712	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	713	(*) printf "\n +++ remote host \"$remote_host\" unknown";
	714	printf "\n please inform S. Raasch!";
	715	locat=config_file; exit;;
	716	esac
	717
	718
	719	# REMOTE-USERNAMEN ERMITTELN
	720	line=""
	721	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
	722	do
	723	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	724	then
	725	line="$line1"
	726	fi
	727	done
	728
	729	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	730	then
	731	printf "\n +++ no remote username found in configuration file"
	732	printf "\n for \"$remote_host_string\" "
	733	locat=config_file; exit
	734	else
	735	remote_username=`echo $line \| cut -d" " -s -f2`
	736	fi
	737
	738
	739	# REMOTE-QUELLTEXTPFAD ERMITTELN
	740	line=""
	741	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
	742	do
	743	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	744	then
	745	line="$line1"
	746	fi
	747	done
	748
	749	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	750	then
	751	remote_source_path=`echo $line \| cut -d" " -s -f2`
	752	fi
	753	if [[ "$remote_source_path" = "" ]]
	754	then
	755	if [[ "$global_source_path" != "" ]]
	756	then
	757	remote_source_path=$global_source_path
	758	else
	759	printf "\n +++ no source path found in configuration file"
	760	printf "\n for \"$remote_host_string\" "
	761	locat=config_file; exit
	762	fi
	763	fi
	764
[22]	765	remote_ud=${remote_source_path}/../UTIL
[24]	766	remote_ud=$(eval echo $remote_ud)
[1]	767
	768	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
	769	line=""
	770	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
	771	do
	772	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	773	then
	774	line="$line1"
	775	fi
	776	done
	777
	778	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	779	then
	780	remote_md=`echo $line \| cut -d" " -s -f2`
	781	fi
	782	if [[ "$remote_md" = "" ]]
	783	then
	784	if [[ "$global_depository_path" != "" ]]
	785	then
	786	remote_md=$global_depository_path
	787	else
	788	printf "\n +++ no depository path found in configuration file"
	789	printf "\n for \"$remote_host_string\" "
	790	printf "\n please set \"\%depository_path\" in configuration file"
	791	locat=config_file; exit
	792	fi
	793	fi
	794
[8]	795	remote_md=$(eval echo $remote_md)
[1]	796
[8]	797
[1]	798	# COMPILERNAMEN ERMITTELN
	799	line=""
[29]	800	grep "$remote_host_string" $config_file \| grep "%compiler_name " \| while read line1
[1]	801	do
	802	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	803	then
	804	line="$line1"
	805	fi
	806	done
	807
	808	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	809	then
	810	printf "\n +++ no compiler name found in configuration file"
	811	printf "\n for \"$remote_host_string\" "
	812	locat=config_file; exit
	813	else
	814	compiler_name=`echo $line \| cut -d" " -s -f2`
	815	fi
	816
	817
[27]	818	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	819	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	820	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	821	then
	822	line=""
	823	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" \| while read line1
	824	do
	825	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	826	then
	827	line="$line1"
	828	fi
	829	done
[1]	830
[27]	831	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	832	then
[28]	833	printf "\n +++ no serial compiler name found in configuration file"
[27]	834	printf "\n for \"$remote_host_string\" "
	835	locat=config_file; exit
	836	else
	837	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	838	fi
	839	else
	840	compiler_name_ser=$compiler_name
	841	fi
	842
	843
	844
[1]	845	# PRAEPROZESSOR-DIREKTIVEN SETZEN
	846	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	847	then
	848	if [[ $remote_host = ibms ]]
	849	then
	850	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
	851	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
	852	else
	853	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
	854	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
	855	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
	856	fi
	857	elif [[ $remote_host = lcmuk ]]
	858	then
	859	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	860	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
	861	elif [[ $remote_host = lctit ]]
	862	then
	863	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	864	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
	865	elif [[ $remote_host = decalpha ]]
	866	then
	867	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
	868	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
	869	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
	870	then
	871	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
	872	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
	873	fi
	874
	875	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	876	then
	877	for string in $remote_host_string
	878	do
	879	if [[ $(echo $string \| cut -c1-3) = ibm ]]
	880	then
	881	cpp_options="${cpp_options},-D__ibm"
	882	if [[ $remote_host = ibmy ]]
	883	then
	884	cpp_options="${cpp_options},-D__ibmy_special"
	885	fi
	886	else
	887	cpp_options="${cpp_options},-D__$string"
	888	fi
	889	done
	890	cpp_options="$cpp_options "
	891	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
	892	then
	893	for string in $remote_host_string
	894	do
	895	if [[ $(echo $string \| cut -c1-3) = nec ]]
	896	then
	897	cpp_options="${cpp_options} -D__nec"
	898	else
	899	cpp_options="${cpp_options} -D__$string"
	900	fi
	901	done
	902	cpp_options="$cpp_options "
	903	else
	904	for string in $remote_host_string
	905	do
	906	cpp_options="$cpp_options -D__$string "
	907	done
	908	fi
	909
	910
	911	# COMPILEROPTIONEN ERMITTELN
	912	line=""
	913	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
	914	do
	915	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	916	then
	917	line="$line1"
	918	fi
	919	done
	920	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	921	then
	922	printf "\n +++ no compiler options found in configuration file"
	923	printf "\n for \"$remote_host_string\" "
	924	locat=config_file; exit
	925	else
	926	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	927	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	928	fi
	929	if [[ $netcdf_support = true ]]
	930	then
	931	case $remote_host in
	932	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
	933	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
	934	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
	935	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	936	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	937	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
	938	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
	939	esac
	940	fi
	941
	942
	943
	944	# LADER-OPTIONEN ERMITTELN
	945	line=""
	946	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
	947	do
	948	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	949	then
	950	line="$line1"
	951	fi
	952	done
	953
	954	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	955	then
	956	printf "\n +++ no loader options found in configuration file"
	957	printf "\n for \"$remote_host_string\" "
	958	locat=config_file; exit
	959	else
	960	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	961	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	962	fi
	963	if [[ $netcdf_support = true ]]
	964	then
	965	case $remote_host in
	966	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	967	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	968	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
	969	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
	970	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
	971	esac
	972	fi
	973
	974
	975	printf "\n\n#------------------------------------------------------------------------# \n"
	976	if [[ $remote_host = $local_host ]]
	977	then
	978	column1="remote_host:"; column2="$remote_host (= local host!)"
	979	else
	980	column1="remote_host:"; column2=$remote_host
	981	fi
	982	printf "\| $column1$column2 \| \n"
	983	printf "\| \| \n"
	984	column1="conditions:"; column2="$condition1 $condition2"
	985	printf "\| $column1$column2 \| \n"
	986	column1="make depository:"; column2=$remote_md
	987	printf "\| $column1$column2 \| \n"
[25]	988	if [[ $compile_utility_programs = true ]]
	989	then
	990	column1="utility directory:"; column2=$remote_ud
	991	printf "\| $column1$column2 \| \n"
	992	fi
[1]	993	column1="username:"; column2=$remote_username
	994	printf "\| $column1$column2 \| \n"
	995	column1="addres:"; column2=$remote_addres
	996	printf "\| $column1$column2 \| \n"
	997	column1="compiler:"; column2=$compiler_name
	998	printf "\| $column1$column2 \| \n"
[28]	999	if [[ $compile_utility_programs = true ]]
	1000	then
	1001	column1="serial compiler:"; column2=$compiler_name_ser
	1002	printf "\| $column1$column2 \| \n"
	1003	fi
[1]	1004	column1="cpp options:"; column2=$cpp_options
	1005	printf "\| $column1$column2 \| \n"
	1006	line=$(echo "$cpp_options" \| cut -c51-)
	1007	while [[ "$line" != "" ]]
	1008	do
	1009	column1=""
	1010	column2=$line
	1011	printf "\| $column1$column2 \| \n"
	1012	line=$(echo "$line" \| cut -c51-)
	1013	done
	1014	column1="compiler options:"; column2=$compiler_options
	1015	printf "\| $column1$column2 \| \n"
	1016	line=$(echo "$compiler_options" \| cut -c51-)
	1017	while [[ "$line" != "" ]]
	1018	do
	1019	column1=""
	1020	column2=$line
	1021	printf "\| $column1$column2 \| \n"
	1022	line=$(echo "$line" \| cut -c51-)
	1023	done
	1024	column1="loader options:"; column2=$loader_options
	1025	printf "\| $column1$column2 \| \n"
	1026	line=$(echo "$loader_options" \| cut -c51-)
	1027	while [[ "$line" != "" ]]
	1028	do
	1029	column1=""
	1030	column2=$line
	1031	printf "\| $column1$column2 \| \n"
	1032	line=$(echo "$line" \| cut -c51-)
	1033	done
	1034	printf "#------------------------------------------------------------------------# \n"
	1035
	1036	if [[ $silent = false ]]
	1037	then
	1038	answer=dummy
	1039	printf "\n\n"
	1040	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1041	do
	1042	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1043	read answer
	1044	done
	1045	if [[ $answer = a \|\| $answer = A ]]
	1046	then
	1047	locat=user_abort; exit
	1048	fi
	1049	if [[ $answer = c \|\| $answer = C ]]
	1050	then
	1051	silent=false
	1052	fi
	1053	if [[ $answer = s \|\| $answer = S ]]
	1054	then
	1055	continue
	1056	fi
	1057	fi
	1058
	1059
	1060	if [[ $remote_mode = batch ]]
	1061	then
	1062
	1063	# BATCH-JOB PARAMETER SETZEN
	1064	case $remote_host in
	1065	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	1066	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	1067	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	1068	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	1069	esac
	1070
	1071
	1072	# BATCH-JOB ZUSAMMENSTELLEN
	1073	printf "\n *** creating batch-job for remote host"
	1074	echo " " > mbuild_job
	1075
	1076	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	1077	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	1078	if [[ $remote_host = t3ej2 ]]
	1079	then
	1080	echo "set +vx" >> mbuild_job
	1081	echo ". .profile" >> mbuild_job
	1082	echo "set -x" >> mbuild_job
	1083	fi
	1084
	1085	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	1086	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	1087	then
	1088	echo "module list" >> mbuild_job
	1089	fi
	1090
	1091
	1092	# WECHSEL IN TEMPORAERES VERZEICHNIS
	1093	echo "cd ${remote_md}" >> mbuild_job
	1094
	1095
	1096	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1097	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	1098	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	1099
	1100
	1101	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1102	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	1103
	1104
	1105	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1106	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	1107
	1108
	1109	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1110	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	1111	echo "chmod u+w *" >> mbuild_job
	1112
	1113	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1114	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	1115
	1116
	1117	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1118	echo "make clean" >> mbuild_job
	1119	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	1120	echo "rm *.f90 Makefile" >> mbuild_job
	1121
	1122
	1123
	1124	# JOB MITTELS SUBJOB STARTEN
	1125	printf "\n *** sending batch job to remote host"
	1126	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1127
	1128
	1129	# JOBFILE LOESCHEN
	1130	# rm aljob
	1131
	1132	else
	1133
	1134	if [[ $remote_host != $local_host ]]
	1135	then
	1136
[40]	1137	if [[ $compile_utility_programs = false ]]
[1]	1138	then
	1139
[40]	1140	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1141	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1142	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1143	if [[ $remote_host != lctit ]]
	1144	then
	1145	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1146	else
	1147	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1148	# MIT SSH, DESHALB AUFRUF PER PIPE
	1149	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1150	fi
	1151	if [[ $local_host = decalpha ]]
	1152	then
	1153	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1154	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1155	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1156	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1157	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1158	else
	1159	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1160	fi
[1]	1161
	1162
	1163
[40]	1164	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1165	echo " *** untar previous update on remote host, if existing"
	1166	if [[ $remote_host != lctit ]]
	1167	then
	1168	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1169	else
	1170	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1171	# MIT SSH, DESHALB AUFRUF PER PIPE
	1172	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1173	fi
[1]	1174
	1175
[40]	1176	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1177	echo " *** untar actual sources on remote host"
	1178	if [[ $remote_host != lctit ]]
	1179	then
	1180	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1181	else
	1182	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1183	# MIT SSH, DESHALB AUFRUF PER PIPE
	1184	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1185	fi
[1]	1186
	1187
[40]	1188	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1189	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1190	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1191	# Z.B. DIE PFADE ZUM COMPILER)
	1192	echo " *** execute \"make\" on remote host"
[1]	1193
[40]	1194	if [[ $remote_host = nech ]]
	1195	then
	1196	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1197	else
	1198	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1199	fi
	1200
	1201	if [[ $remote_host = t3eh ]]
	1202	then
[1]	1203
[40]	1204	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1205
[40]	1206	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1207	then
[1]	1208
[40]	1209	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1210
[40]	1211	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1212	then
[1]	1213
[40]	1214	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1215
[40]	1216	elif [[ $remote_host = lctit ]]
	1217	then
[1]	1218
[40]	1219	echo " " > ${remote_host}_last_make_protokoll
	1220	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1221	do
	1222	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1223	done
[1]	1224
[40]	1225	else
[1]	1226
[40]	1227	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1228
[40]	1229	fi
[1]	1230
[40]	1231	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1232	then
[40]	1233	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1234	if [[ $silent = false ]]
	1235	then
	1236	answer=dummy
	1237	printf "\n"
	1238	while [[ "$answer" != c && "$answer" != k ]]
	1239	do
	1240	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1241	read answer
	1242	if [[ "$answer" = l ]]
	1243	then
	1244	more ${remote_host}_last_make_protokoll
	1245	fi
	1246	done
	1247	if [[ $answer = k ]]
[1]	1248	then
[40]	1249	locat=user_abort; exit
[1]	1250	fi
	1251	fi
	1252	fi
	1253
	1254
	1255
[40]	1256	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1257	printf "\n *** tar update on remote host ..."
	1258	if [[ $remote_host != lctit ]]
	1259	then
	1260	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
	1261	else
	1262	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1263	# MIT SSH, DESHALB AUFRUF PER PIPE
	1264	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1265	fi
[1]	1266
	1267
[40]	1268	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1269	# printf "\n *** \"make clean\" on remote host ..."
	1270	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1271	# printf "\n"
[1]	1272
	1273
[25]	1274
	1275
[22]	1276	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1277	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1278	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1279	elif [[ $compile_utility_programs = true ]]
[22]	1280	then
	1281
[24]	1282	printf "\n\n"
[27]	1283	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1284	cd ${local_source_path}/../SCRIPTS
[22]	1285
	1286	if [[ $remote_host != lctit ]]
	1287	then
[24]	1288	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1289	else
	1290	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1291	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1292	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1293	fi
	1294
[27]	1295	# KOPIEREN DER SCRIPTE
[22]	1296	if [[ $local_host = decalpha ]]
	1297	then
	1298	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1299	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1300	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1301	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1302	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1303	else
[28]	1304	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1305	fi
	1306
	1307	cd - > /dev/null
	1308	cd ${local_source_path}/../UTIL
	1309
	1310
	1311	# KOPIEREN DER UTILITY-PROGRAMME
	1312	if [[ $local_host = decalpha ]]
	1313	then
	1314	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1315	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1316	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1317	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1318	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1319	else
[24]	1320	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1321	fi
	1322
	1323
	1324
	1325	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1326	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1327	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1328	# Z.B. DIE PFADE ZUM COMPILER)
	1329	echo " *** execute \"make\" on remote host"
	1330
	1331	if [[ $remote_host = nech ]]
	1332	then
[27]	1333	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1334	else
[27]	1335	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1336	fi
	1337
	1338	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1339	then
	1340
[25]	1341	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1342
	1343	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1344	then
	1345
[25]	1346	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1347
	1348	elif [[ $remote_host = lctit ]]
	1349	then
	1350
	1351	echo " " > ${remote_host}_last_make_protokoll
	1352	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1353	do
	1354	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1355	done
	1356
	1357	else
	1358
	1359	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1360
	1361	fi
	1362
	1363	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1364
	1365
[1]	1366	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1367	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1368
	1369	else
	1370
[40]	1371	if [[ $compile_utility_programs = false ]]
	1372	then
[1]	1373
[40]	1374	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1375	echo " "
	1376	echo " *** execute \"make\" on local host"
[1]	1377
[40]	1378	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1379
	1380	if [[ $? != 0 ]]
[1]	1381	then
[40]	1382	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1383	if [[ $silent = false ]]
	1384	then
	1385	answer=dummy
	1386	printf "\n"
	1387	while [[ "$answer" != c && "$answer" != k ]]
	1388	do
	1389	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1390	read answer
	1391	if [[ "$answer" = l ]]
	1392	then
	1393	more ${remote_host}_last_make_protokoll
	1394	fi
	1395	done
	1396	if [[ $answer = k ]]
[1]	1397	then
[40]	1398	locat=user_abort; exit
[1]	1399	fi
	1400	fi
	1401	fi
	1402
	1403
[40]	1404	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1405	printf "\n *** tar update on local host ..."
	1406	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1407
[22]	1408
	1409	# COMPILE THE UTILITY PROGRAMS
[40]	1410	elif [[ $compile_utility_programs = true ]]
[22]	1411	then
	1412	printf "\n\n"
	1413	echo " *** compiling the utility programs ..."
	1414	cd ${local_source_path}/../UTIL
[35]	1415	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1416	cd - > /dev/null
	1417	fi
	1418
	1419
[1]	1420	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1421	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1422
	1423	fi
	1424
	1425	fi
	1426	done
	1427
	1428
	1429	if [[ $host_found = false ]]
	1430	then
	1431	if [[ $host = all ]]
	1432	then
	1433	printf "\n +++ no hosts found in configuration file"
	1434	else
	1435	printf "\n +++ host \"$host\" not found in configuration file"
	1436	fi
	1437	locat=config_file; exit
	1438	fi
	1439
	1440
	1441
	1442	# ABSCHLIESSENDE ARBEITEN
	1443	rm -f hosts_found_in_config_file
	1444

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |