Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1028

Last change on this file since 1028 was 1021, checked in by raasch, 12 years ago
script adjustments for lcsb (Seoul National University)
Property svn:keywords set to `Id Rev`
File size: 54.3 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 1021 2012-10-02 13:52:49Z suehring $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[818]	130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
	131	# corrected
[935]	132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
	133	# bugfixes for the parameter file check, initial
	134	# commands on ssh calls sourced out to .mrun.config
	135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
	136	# 18/06/12 - Siggi - option -v (silent mode) added
[936]	137	# 25/06/12 - Siggi - option -K (block conditions) added
[1018]	138	# 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
[1021]	139	# 02/10/12 - Siggi - added lcsb
[1]	140
	141
[503]	142	# VARIABLE DECLARATIONS + DEFAULT VALUES
[936]	143	block_conditions=none
	144	block_conditions_found=false
[22]	145	compile_utility_programs=false
[1]	146	config_file=.mrun.config
[67]	147	fimm=false
[1]	148	host=all
	149	host_found=false
	150	locat=normal
	151	makefile=""
[493]	152	module_calls=""
[811]	153	util_compiled_localhost=false
[1]	154	scirocco=false
	155	silent=false
	156	suf=f90
	157	update=false
[83]	158	working_directory=`pwd`
[1]	159
	160	typeset -i ih ihost=0
	161
[66]	162	typeset -R30 calltime
[1]	163	typeset -L20 column1
	164	typeset -L50 column2
	165	typeset -L70 column3
[215]	166	typeset -L40 version="MBUILD 2.1 Rev$Rev: 1021 $"
[1]	167
[503]	168	# ERROR HANDLING
	169	# IN CASE OF EXIT:
[83]	170	trap 'rm -rf $working_directory/tmp_mbuild
[69]	171	if [[ $locat != normal ]]
[1]	172	then
	173	printf "\n\n +++ mbuild killed \n\n"
	174	else
	175	printf "\n\n *** mbuild finished \n\n"
	176	fi' exit
	177
	178
[503]	179	# IN CASE OF TERMINAL-BREAK:
[83]	180	trap 'rm -rf $working_directory/tmp_mbuild
[69]	181	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	182	exit
	183	' 2
	184
	185
[215]	186	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	187
[503]	188	# READ SHELLSCRIPT-OPTIONS
[936]	189	while getopts :c:h:K:m:s:uv option
[1]	190	do
	191	case $option in
	192	(c) config_file=$OPTARG;;
	193	(h) host=$OPTARG;;
[936]	194	(K) block_conditions=$OPTARG;;
[1]	195	(m) makefile=$OPTARG;;
	196	(s) suf=$OPTARG;;
[22]	197	(u) compile_utility_programs=true;;
[935]	198	(v) silent=true;;
[1]	199	(\?) printf "\n +++ unknown option $OPTARG \n";
	200	locat=parameter; exit;;
	201	esac
	202	done
	203
	204
	205
[503]	206	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	207	if [[ ! -f $config_file ]]
	208	then
	209	printf "\n +++ configuration file: "
	210	printf "\n $config_file"
	211	printf "\n does not exist"
	212	locat=configuration; exit
	213	fi
	214
	215
	216
[503]	217	# DETERMINE THE LOCAL HOST
[1]	218	local_host_real_name=$(hostname)
[69]	219	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	220
[1]	221
[82]	222
[503]	223	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	224	line=""
[215]	225	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	226	while read line
	227	do
[116]	228	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	229	then
	230	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	231	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	232	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	233	then
	234	local_host=$host_identifier
	235	break
	236	fi
	237	fi
[215]	238	done < $tmp_mbuild
[82]	239
	240	if [[ "$local_host" = "" ]]
	241	then
	242	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	243	printf "\n for local host \"$local_host_real_name\"."
	244	printf "\n Please add line"
	245	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	246	printf "\n to the configuration file."
	247	locat=local_host; exit
	248	fi
	249
	250
	251
[1]	252	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	253	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	254
	255
	256
	257	if [[ $local_host != ibms ]]
	258	then
	259	config_file=$PWD/$config_file
	260	else
	261	config_file=`pwd`/$config_file
	262	fi
	263
	264
[936]	265	# determine the block conditions
	266	if [[ $block_conditions != none ]]
	267	then
	268	block_condition1=`echo $block_conditions \| cut -d" " -f1`
	269	block_condition2=`echo $block_conditions \| cut -d" " -f2`
	270	if [[ "$block_condition2" = "$block_condition1" ]]
	271	then
	272	block_condition2=""
	273	fi
	274	fi
	275
[1]	276
[503]	277	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	278	line=""
[215]	279	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	280	while read line
[1]	281	do
[116]	282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	283	then
	284	local_username=`echo $line \| cut -d" " -s -f2`
	285	fi
[215]	286	done < $tmp_mbuild
[1]	287
[82]	288
[1]	289	if [[ "$local_username" = "" ]]
	290	then
	291	printf "\n +++ no user name found in configuration file"
	292	printf "\n for local host \"$local_host\" "
	293	locat=config_file; exit
	294	fi
	295
	296
[503]	297	# DETERMINE LOCAL SOURCE-CODE PATH.
	298	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	299	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	300	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	301	line=""
[215]	302	grep "%" $config_file > $tmp_mbuild
[69]	303	while read line
[5]	304	do
[116]	305	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	306	then
[5]	307	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	308	value=`echo $line \| cut -d" " -s -f2`
[8]	309	eval export $var=\$value
[1]	310	fi
[215]	311	done < $tmp_mbuild
[1]	312
[503]	313	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	314	line=""
[215]	315	grep "%source_path" $config_file > $tmp_mbuild
[69]	316	while read line
[1]	317	do
	318	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	319	then
	320	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	321	then
	322	global_source_path=`echo $line \| cut -d" " -s -f2`
	323	fi
	324	fi
[215]	325	done < $tmp_mbuild
[1]	326
	327	line=""
[215]	328	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	329	while read line
[1]	330	do
	331	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	332	then
	333	local_source_path=`echo $line \| cut -d" " -s -f2`
	334	fi
[215]	335	done < $tmp_mbuild
[1]	336
	337	if [[ "$local_source_path" = "" ]]
	338	then
	339	if [[ "$global_source_path" != "" ]]
	340	then
	341	local_source_path=$global_source_path
	342	else
	343	printf "\n +++ no source path found in configuration file"
	344	printf "\n for local host \"$local_host\" "
	345	printf "\n please set \"\%source_path\" in configuration file"
	346	locat=config_file; exit
	347	fi
	348	fi
	349	eval local_source_path=$local_source_path
[8]	350	eval local_source_path=$local_source_path
[1]	351
	352
[215]	353
[503]	354	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	355	line=""
[215]	356	grep "%depository_path" $config_file > $tmp_mbuild
[69]	357	while read line
[1]	358	do
	359	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	360	then
	361	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	362	then
	363	global_depository_path=`echo $line \| cut -d" " -s -f2`
	364	fi
	365	fi
[215]	366	done < $tmp_mbuild
[1]	367
[807]	368	if [[ $found = false ]]
	369	then
	370	printf "\n +++ no \%depository_path found in"
	371	printf "\n $config_file"
	372	locat=depository_path; exit
	373	fi
[1]	374
[503]	375	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	376	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	377	then
	378	printf "\n +++ no main program or more than one main program defined"
	379	printf "\n in configuration file"
	380	locat=configuration; exit
	381	else
	382	line=`grep "%mainprog" $config_file`
	383	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	384	then
	385	printf "\n +++ no main program defined in configuration file"
	386	locat=configuration; exit
	387	fi
	388	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	389	fi
	390
	391
	392
[503]	393	# CHECK IF MAKEFILE EXITS
[1]	394	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	395	if [[ ! -f $makefile ]]
	396	then
	397	printf "\n +++ makefile: "
	398	printf "\n $makefile"
	399	printf "\n does not exist"
	400	locat=makefile; exit
	401	fi
	402
	403
[503]	404	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	405	calltime=$(date)
	406	printf "\n"
	407	printf "#------------------------------------------------------------------------# \n"
	408	printf "\| $version$calltime \| \n"
	409	printf "\| \| \n"
	410	column1="called on:"; column2=$local_host_real_name
	411	printf "\| $column1$column2 \| \n"
	412	column1="local username:"; column2=$local_username
	413	printf "\| $column1$column2 \| \n"
	414	column1="local IP-addres:"; column2=$local_addres
	415	printf "\| $column1$column2 \| \n"
	416	column1="config file:"; column2=$config_file
	417	printf "\| $column1$column2 \| \n"
	418	column1="makefile:"; column2=$makefile
	419	printf "\| $column1$column2 \| \n"
	420	column1="local source path:"; column2=$local_source_path
	421	printf "\| $column1$column2 \| \n"
	422	printf "#------------------------------------------------------------------------# \n"
	423
	424	# printf "\| \| \n"
	425
	426
[40]	427	if [[ $compile_utility_programs = false ]]
	428	then
[1]	429
[503]	430	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	431	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	432	cd $local_source_path
	433	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	434	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	435	printf "\n"
[1]	436
[807]	437	else
	438	cd $local_source_path
	439	printf "\n\n *** tar of makefile and source files in $local_source_path"
	440
	441	cat Makefile_check\|while read line
	442	do
	443	line=$(echo $line\|grep RCS)
	444	if [[ $line == "RCS" ]]
	445	then
	446	line=$(echo $line\|sed 's/RCS = //g')
	447	break
	448	fi
	449	done
	450
	451	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	452	printf "\n"
[40]	453	fi
[1]	454
	455
[40]	456
[503]	457	# GET CONFIRMATION TO CONTINUE
[1]	458	if [[ $host = all ]]
	459	then
	460	printf "\n *** updates will be made for ALL hosts found in"
	461	printf "\n the configuration file"
	462	else
	463	printf "\n *** update will be made for host \"$host\" "
	464	fi
	465
	466	if [[ $silent = false ]]
	467	then
	468	answer=dummy
	469	printf "\n\n"
	470	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	471	do
	472	printf " >>> continue (y/n) ? "
	473	read answer
	474	done
	475	if [[ $answer = n \|\| $answer = N ]]
	476	then
	477	locat=user_abort; exit
	478	fi
	479	fi
	480
	481
	482
	483
	484	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	485	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	486	printf "\n *** scanning configuration file for host(s) ..."
	487
[215]	488	grep %fopts $config_file > $tmp_mbuild
[69]	489	while read line
[1]	490	do
	491	# KOMMENTARZEILEN UEBERSPRINGEN
	492	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	493	(( ihost = ihost + 1 ))
	494	hostline[$ihost]="$line"
[215]	495	done < $tmp_mbuild
[1]	496
	497
	498	while (( ih < ihost ))
	499	do
	500
	501	(( ih = ih + 1 ))
	502
[936]	503	# determine remote host and conditions for the respective block
	504	# continue, only if this host has been chosen via -h option and if
	505	# conditions have been chosen via -K option
[1]	506	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	507	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	508	if [[ $host != all ]]
	509	then
	510	[[ $remote_host != $host ]] && continue
	511	fi
	512	host_found=true
	513	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	514	if [[ $condition1 = $remote_host ]]
	515	then
	516	condition1=""
	517	else
	518	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	519	fi
	520
[936]	521	if [[ $block_conditions != none ]]
	522	then
	523	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
	524	then
	525	continue
	526	fi
	527	block_conditions_found=true
	528	fi
	529
[493]	530	modules=""
[82]	531	netcdf_inc=""
	532	netcdf_lib=""
[784]	533	make_options=""
[1]	534
	535	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	536	case $remote_host in
[980]	537	(lckordi) remote_adress=210.219.61.8;;
[116]	538	(lcmuk) remote_addres=130.75.105.2;;
[622]	539	(lcrte) remote_addres=133.5.185.60;;
[1021]	540	(lcsb) remote_adress=147.46.30.151;;
[181]	541	(lcsgib) remote_addres=130.73.232.102;;
[740]	542	(lcsgih) remote_addres=130.75.4.101;;
[367]	543	(lck) remote_addres=165.132.26.61;;
[635]	544	(lctit) remote_addres=10.1.6.170;;
[892]	545	(lcxe6) remote_addres=129.177.20.113;;
[437]	546	(lcxt5m) remote_addres=193.166.211.144;;
[83]	547	(decalpha) remote_addres=165.132.26.56;;
[305]	548	(ibmh) remote_addres=136.172.40.15;;
[693]	549	(ibmkisti) remote_addres=150.183.146.24;;
[622]	550	(ibmku) remote_addres=133.5.4.129;;
[83]	551	(ibms) remote_addres=150.183.5.101;;
	552	(ibmy) remote_addres=165.132.26.58;;
	553	(nech) remote_addres=136.172.44.192;;
	554	(neck) remote_addres=133.5.178.11;;
	555	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	556	(*) if [[ $local_host != $remote_host ]]
[1]	557	then
[83]	558	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	559	printf "\n please inform PALM group support!"
[1]	560	fi;;
	561	esac
	562
	563
	564	# REMOTE-USERNAMEN ERMITTELN
	565	line=""
[116]	566	found=false
[215]	567	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	568	while read line1
[1]	569	do
[116]	570
[1]	571	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	572	then
	573	line="$line1"
	574	fi
[116]	575
	576	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	577	then
	578	remote_username=`echo $line \| cut -d" " -s -f2`
	579	found=true
	580	fi
	581
[215]	582	done < $tmp_mbuild
[1]	583
[116]	584	if [[ $found = false ]]
[1]	585	then
	586	printf "\n +++ no remote username found in configuration file"
	587	printf "\n for \"$remote_host_string\" "
	588	locat=config_file; exit
	589	fi
	590
	591
	592	# REMOTE-QUELLTEXTPFAD ERMITTELN
	593	line=""
[54]	594	remote_source_path=""
[215]	595	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	596	while read line1
[1]	597	do
[116]	598
[1]	599	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	600	then
	601	line="$line1"
	602	fi
[116]	603
	604	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	605	then
	606	remote_source_path=`echo $line \| cut -d" " -s -f2`
	607	fi
	608
[215]	609	done < $tmp_mbuild
[1]	610
	611	if [[ "$remote_source_path" = "" ]]
	612	then
	613	if [[ "$global_source_path" != "" ]]
	614	then
	615	remote_source_path=$global_source_path
	616	else
	617	printf "\n +++ no source path found in configuration file"
	618	printf "\n for \"$remote_host_string\" "
	619	locat=config_file; exit
	620	fi
	621	fi
	622
[22]	623	remote_ud=${remote_source_path}/../UTIL
[24]	624	remote_ud=$(eval echo $remote_ud)
[1]	625
[54]	626
[1]	627	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	628	remote_md=""
[1]	629	line=""
[215]	630	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	631	while read line1
[1]	632	do
[116]	633
[1]	634	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	635	then
	636	line="$line1"
	637	fi
[116]	638
	639	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	640	then
	641	remote_md=`echo $line \| cut -d" " -s -f2`
	642	fi
	643
[215]	644	done < $tmp_mbuild
[1]	645
	646	if [[ "$remote_md" = "" ]]
	647	then
	648	if [[ "$global_depository_path" != "" ]]
	649	then
	650	remote_md=$global_depository_path
	651	else
	652	printf "\n +++ no depository path found in configuration file"
	653	printf "\n for \"$remote_host_string\" "
	654	printf "\n please set \"\%depository_path\" in configuration file"
	655	locat=config_file; exit
	656	fi
	657	fi
	658
[8]	659	remote_md=$(eval echo $remote_md)
[503]	660	block=""
	661	[[ "$condition1" != "" ]] && block=_$condition1
	662	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	663	remote_md=${remote_md}$block
[1]	664
[8]	665
[1]	666	# COMPILERNAMEN ERMITTELN
	667	line=""
[116]	668	found=false
[215]	669	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	670	while read line1
[1]	671	do
[116]	672
[1]	673	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	674	then
	675	line="$line1"
	676	fi
[116]	677
	678	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	679	then
	680	compiler_name=`echo $line \| cut -d" " -s -f2`
	681	found=true
	682	fi
	683
[215]	684	done < $tmp_mbuild
[1]	685
[116]	686	if [[ $found = false ]]
[1]	687	then
	688	printf "\n +++ no compiler name found in configuration file"
	689	printf "\n for \"$remote_host_string\" "
	690	locat=config_file; exit
	691	fi
	692
	693
[27]	694	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	695	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	696	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	697	then
	698	line=""
[116]	699	found=false
[215]	700	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	701	while read line1
[27]	702	do
[116]	703
[27]	704	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	705	then
	706	line="$line1"
	707	fi
[116]	708
	709	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	710	then
	711	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	712	found=true
	713	fi
	714
[215]	715	done < $tmp_mbuild
[1]	716
[116]	717	if [[ $found = false ]]
[27]	718	then
[28]	719	printf "\n +++ no serial compiler name found in configuration file"
[27]	720	printf "\n for \"$remote_host_string\" "
	721	locat=config_file; exit
	722	fi
	723	else
	724	compiler_name_ser=$compiler_name
	725	fi
	726
	727
	728
[82]	729	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	730	line=""
[116]	731	found=false
[215]	732	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	733	while read line1
	734	do
[116]	735
[82]	736	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	737	then
	738	line="$line1"
	739	fi
[116]	740
	741	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	742	then
	743	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	744	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	745	found=true
	746	fi
	747
[215]	748	done < $tmp_mbuild
[116]	749
	750	if [[ $found = false ]]
[82]	751	then
	752	printf "\n +++ no preprocessor options found in configuration file"
	753	printf "\n for \"$remote_host_string\" "
	754	locat=config_file; exit
	755	fi
	756
[116]	757
[82]	758	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	759	for string in $remote_host_string
	760	do
	761	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	762	then
	763	cpp_options="$cpp_options -D__lc "
[83]	764	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	765	then
	766	cpp_options="${cpp_options},-D__ibm"
	767	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	768	then
	769	cpp_options="${cpp_options} -D__nec"
[82]	770	else
[83]	771	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	772	then
	773	cpp_options="${cpp_options},-D__$string"
	774	else
	775	cpp_options="$cpp_options -D__$string "
	776	fi
[82]	777	fi
	778	done
	779
	780
	781
	782	# NETCDF-OPTIONEN ERMITTELN
	783	line=""
[215]	784	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	785	while read line1
	786	do
[116]	787
[82]	788	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	789	then
	790	line="$line1"
	791	fi
[116]	792
	793	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	794	then
	795	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	796	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	797	fi
	798
[215]	799	done < $tmp_mbuild
[82]	800
	801	line=""
[215]	802	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	803	while read line1
	804	do
[116]	805
[82]	806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	807	then
	808	line="$line1"
	809	fi
[116]	810
	811	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	812	then
	813	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	814	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	815	fi
	816
[215]	817	done < $tmp_mbuild
[82]	818
	819
	820
[475]	821	# get make options
	822	line=""
	823	found=false
	824	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	825	while read line1
	826	do
	827
	828	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	829	then
	830	line="$line1"
	831	fi
	832
	833	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	834	then
	835	# remove colons from directive string
	836	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	837
	838	fi
	839
	840	done < $tmp_mbuild
	841
	842
	843
[1]	844	# COMPILEROPTIONEN ERMITTELN
	845	line=""
[116]	846	found=false
[215]	847	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	848	while read line1
[1]	849	do
[116]	850
[1]	851	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	852	then
	853	line="$line1"
	854	fi
[116]	855
	856	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	857	then
	858	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	859	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	860	found=true
	861
	862	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	863	compiler_options="$compiler_options $netcdf_inc"
	864	fi
	865
[215]	866	done < $tmp_mbuild
[116]	867
	868	if [[ $found = false ]]
[1]	869	then
	870	printf "\n +++ no compiler options found in configuration file"
	871	printf "\n for \"$remote_host_string\" "
	872	locat=config_file; exit
	873	fi
[82]	874
[1]	875
[892]	876	# get login init commands, "::" is replacing a space
	877	line=""
	878	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
	879	while read line1
	880	do
[1]	881
[892]	882	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	883	then
	884	line="$line1"
	885	fi
	886
	887	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	888	then
	889	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	890	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	891	fi
	892	init_cmds="${init_cmds};"
	893	done < $tmp_mbuild
	894
	895
[503]	896	# get modules to be loaded
[221]	897	line=""
[493]	898	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	899	while read line1
	900	do
	901
	902	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	903	then
	904	line="$line1"
	905	fi
	906
	907	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	908	then
	909	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	910	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	911	fi
	912
	913	done < $tmp_mbuild
	914
	915
[1]	916	# LADER-OPTIONEN ERMITTELN
	917	line=""
[116]	918	found=false
[215]	919	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	920	while read line1
[1]	921	do
[116]	922
[1]	923	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	924	then
	925	line="$line1"
	926	fi
[116]	927
	928	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	929	then
	930	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	931	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	932	found=true
	933
	934	# NETCDF-LIBRARY HINZUFUEGEN
	935	loader_options="$loader_options $netcdf_lib"
	936	fi
	937
[215]	938	done < $tmp_mbuild
[1]	939
[116]	940	if [[ $found = false ]]
[1]	941	then
	942	printf "\n +++ no loader options found in configuration file"
	943	printf "\n for \"$remote_host_string\" "
	944	locat=config_file; exit
	945	fi
[82]	946
[1]	947
	948	printf "\n\n#------------------------------------------------------------------------# \n"
	949	if [[ $remote_host = $local_host ]]
	950	then
	951	column1="remote_host:"; column2="$remote_host (= local host!)"
	952	else
	953	column1="remote_host:"; column2=$remote_host
	954	fi
	955	printf "\| $column1$column2 \| \n"
	956	printf "\| \| \n"
	957	column1="conditions:"; column2="$condition1 $condition2"
	958	printf "\| $column1$column2 \| \n"
	959	column1="make depository:"; column2=$remote_md
	960	printf "\| $column1$column2 \| \n"
[215]	961	line=$(echo "$remote_md" \| cut -c51-)
	962	while [[ "$line" != "" ]]
	963	do
	964	column1=""
	965	column2=$line
	966	printf "\| $column1$column2 \| \n"
	967	line=$(echo "$line" \| cut -c51-)
	968	done
[25]	969	if [[ $compile_utility_programs = true ]]
	970	then
	971	column1="utility directory:"; column2=$remote_ud
	972	printf "\| $column1$column2 \| \n"
	973	fi
[1]	974	column1="username:"; column2=$remote_username
	975	printf "\| $column1$column2 \| \n"
	976	column1="addres:"; column2=$remote_addres
	977	printf "\| $column1$column2 \| \n"
	978	column1="compiler:"; column2=$compiler_name
	979	printf "\| $column1$column2 \| \n"
[28]	980	if [[ $compile_utility_programs = true ]]
	981	then
	982	column1="serial compiler:"; column2=$compiler_name_ser
	983	printf "\| $column1$column2 \| \n"
	984	fi
[475]	985	if [[ "$make_options" != "" ]]
	986	then
	987	column1="make options:"; column2=$make_options
	988	printf "\| $column1$column2 \| \n"
	989	fi
[1]	990	column1="cpp options:"; column2=$cpp_options
	991	printf "\| $column1$column2 \| \n"
	992	line=$(echo "$cpp_options" \| cut -c51-)
	993	while [[ "$line" != "" ]]
	994	do
	995	column1=""
	996	column2=$line
	997	printf "\| $column1$column2 \| \n"
	998	line=$(echo "$line" \| cut -c51-)
	999	done
	1000	column1="compiler options:"; column2=$compiler_options
	1001	printf "\| $column1$column2 \| \n"
	1002	line=$(echo "$compiler_options" \| cut -c51-)
	1003	while [[ "$line" != "" ]]
	1004	do
	1005	column1=""
	1006	column2=$line
	1007	printf "\| $column1$column2 \| \n"
	1008	line=$(echo "$line" \| cut -c51-)
	1009	done
	1010	column1="loader options:"; column2=$loader_options
	1011	printf "\| $column1$column2 \| \n"
	1012	line=$(echo "$loader_options" \| cut -c51-)
	1013	while [[ "$line" != "" ]]
	1014	do
	1015	column1=""
	1016	column2=$line
	1017	printf "\| $column1$column2 \| \n"
	1018	line=$(echo "$line" \| cut -c51-)
	1019	done
[493]	1020	if [[ $modules != "" ]]
	1021	then
	1022	column1="modules to be load:"; column2=$modules
	1023	printf "\| $column1$column2 \| \n"
	1024	line=$(echo "$modules" \| cut -c51-)
	1025	while [[ "$line" != "" ]]
	1026	do
	1027	column1=""
	1028	column2=$line
	1029	printf "\| $column1$column2 \| \n"
	1030	line=$(echo "$line" \| cut -c51-)
	1031	done
	1032	fi
[1]	1033	printf "#------------------------------------------------------------------------# \n"
	1034
	1035	if [[ $silent = false ]]
	1036	then
	1037	answer=dummy
	1038	printf "\n\n"
	1039	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1040	do
	1041	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1042	read answer
	1043	done
	1044	if [[ $answer = a \|\| $answer = A ]]
	1045	then
	1046	locat=user_abort; exit
	1047	fi
	1048	if [[ $answer = c \|\| $answer = C ]]
	1049	then
[503]	1050	silent=true
[1]	1051	fi
	1052	if [[ $answer = s \|\| $answer = S ]]
	1053	then
	1054	continue
	1055	fi
	1056	fi
	1057
	1058
[475]	1059	# make on remote host
	1060	if [[ $remote_host != $local_host ]]
[1]	1061	then
[475]	1062	if [[ $compile_utility_programs = false ]]
[1]	1063	then
	1064
[475]	1065	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1066	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1067	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1068	if [[ $remote_host != lctit ]]
	1069	then
	1070	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1071	else
	1072	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1073	# MIT SSH, DESHALB AUFRUF PER PIPE
	1074	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1075	fi
	1076	if [[ $local_host = decalpha ]]
	1077	then
	1078	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1079	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1080	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1081	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1082	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1083	else
	1084	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1085	fi
[1]	1086
	1087
	1088
[475]	1089	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1090	echo " *** untar previous update on remote host, if existing"
	1091	if [[ $remote_host != lctit ]]
	1092	then
	1093	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1094	else
	1095	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1096	# MIT SSH, DESHALB AUFRUF PER PIPE
	1097	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1098	fi
[1]	1099
	1100
[475]	1101	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1102	echo " *** untar actual sources on remote host"
	1103	if [[ $remote_host != lctit ]]
	1104	then
	1105	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1106	else
	1107	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1108	# MIT SSH, DESHALB AUFRUF PER PIPE
	1109	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1110	fi
[1]	1111
	1112
[475]	1113	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1114	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1115	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1116	# Z.B. DIE PFADE ZUM COMPILER)
	1117	echo " *** execute \"make\" on remote host"
[1]	1118
[493]	1119
	1120	# generate make call with make options
[475]	1121	if [[ $remote_host = nech ]]
	1122	then
	1123	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1124	else
	1125	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1126	fi
[1]	1127
[493]	1128	# generate command to load modules, if modules are given
	1129	if [[ "$modules" != "" ]]
	1130	then
[678]	1131	if [[ $remote_host = lctit ]]
	1132	then
	1133	module_calls=". $modules"
	1134	else
	1135	module_calls="module load ${modules};"
	1136	fi
[555]	1137
	1138	# bugfix for wrong netcdf module
	1139	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1140	then
	1141	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1142	then
	1143	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1144	fi
	1145	fi
[503]	1146	else
	1147	module_calls=""
[493]	1148	fi
	1149
[693]	1150	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1151	then
[1]	1152
[892]	1153	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1154
[475]	1155	elif [[ $remote_host = ibmh ]]
	1156	then
[1]	1157
[892]	1158	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1159
[475]	1160	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1161	then
[622]	1162	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[892]	1163	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1164
[475]	1165	elif [[ $remote_host = lctit ]]
	1166	then
[1]	1167
[475]	1168	echo " " > ${remote_host}_last_make_protokoll
	1169	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1170	do
	1171	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1172	done
[1]	1173
[892]	1174	elif [[ $remote_host = lcxe6 ]]
[1]	1175	then
	1176
[892]	1177	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1178
[475]	1179	else
[1]	1180
[892]	1181	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1182
[475]	1183	fi
[1]	1184
[475]	1185	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1186	then
	1187	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1188	if [[ $silent = false ]]
[40]	1189	then
[475]	1190	answer=dummy
	1191	printf "\n"
	1192	while [[ "$answer" != c && "$answer" != k ]]
[40]	1193	do
[475]	1194	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1195	read answer
	1196	if [[ "$answer" = l ]]
	1197	then
	1198	more ${remote_host}_last_make_protokoll
	1199	fi
[40]	1200	done
[475]	1201	if [[ $answer = k ]]
[40]	1202	then
[475]	1203	locat=user_abort; exit
[1]	1204	fi
	1205	fi
[475]	1206	fi
[1]	1207
	1208
	1209
[475]	1210	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1211	printf "\n *** tar update on remote host ..."
	1212	if [[ $remote_host != lctit ]]
	1213	then
	1214	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1215	else
	1216	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1217	# MIT SSH, DESHALB AUFRUF PER PIPE
	1218	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1219	fi
[1]	1220
	1221
[475]	1222	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1223	# printf "\n *** \"make clean\" on remote host ..."
	1224	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1225	# printf "\n"
[1]	1226
	1227
[25]	1228
	1229
[475]	1230	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1231	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1232	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1233	elif [[ $compile_utility_programs = true ]]
	1234	then
	1235
	1236	printf "\n\n"
	1237	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1238	cd ${local_source_path}/../SCRIPTS
	1239
	1240	if [[ $remote_host != lctit ]]
[22]	1241	then
[475]	1242	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1243	else
[503]	1244	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1245	# MIT SSH, DESHALB AUFRUF PER PIPE
	1246	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1247	fi
[22]	1248
[475]	1249	# KOPIEREN DER SCRIPTE
	1250	if [[ $local_host = decalpha ]]
	1251	then
[503]	1252	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1253	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1254	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1255	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1256	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1257	else
	1258	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1259	fi
[22]	1260
[475]	1261	cd - > /dev/null
	1262	cd ${local_source_path}/../UTIL
[22]	1263
[27]	1264
[475]	1265	# KOPIEREN DER UTILITY-PROGRAMME
	1266	if [[ $local_host = decalpha ]]
	1267	then
	1268	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1269	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1270	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1271	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1272	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1273	else
	1274	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1275	fi
[27]	1276
	1277
[22]	1278
[475]	1279	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1280	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1281	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1282	# Z.B. DIE PFADE ZUM COMPILER)
	1283	echo " *** execute \"make\" on remote host"
[22]	1284
[475]	1285	if [[ $remote_host = nech ]]
	1286	then
[503]	1287	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1288	else
[503]	1289	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1290	fi
[22]	1291
[493]	1292	# generate command to load modules, if modules are given
	1293	if [[ "$modules" != "" ]]
	1294	then
[678]	1295	if [[ $remote_host = lctit ]]
	1296	then
	1297	module_calls=". $modules"
	1298	else
	1299	module_calls="module load ${modules};"
	1300	fi
[562]	1301
	1302	# bugfix for wrong netcdf module
	1303	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1304	then
	1305	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1306	then
	1307	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1308	fi
	1309	fi
[503]	1310	else
	1311	module_calls=""
[493]	1312	fi
	1313
[892]	1314
[475]	1315	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1316	then
[22]	1317
[892]	1318	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1319
[475]	1320	elif [[ $remote_host = ibmh ]]
	1321	then
[22]	1322
[892]	1323	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1324
[475]	1325	elif [[ $remote_host = lctit ]]
	1326	then
[22]	1327
[475]	1328	echo " " > ${remote_host}_last_make_protokoll
	1329	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1330	do
[892]	1331	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1332	done
[22]	1333
[892]	1334	elif [[ $remote_host = lcxe6 ]]
[475]	1335	then
[22]	1336
[892]	1337	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1338
[475]	1339	else
[407]	1340
[892]	1341	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1342
[475]	1343	fi
[22]	1344
[475]	1345	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1346
[475]	1347	rm -rf ${remote_host}_last_make_protokoll
[22]	1348
[475]	1349	# make on local host
	1350	else
[22]	1351
[892]	1352	# workaround for lcxe6
	1353	if [[ $remote_host = lcxe6 ]]
[544]	1354	then
[920]	1355
	1356	eval $init_cmds
	1357
[544]	1358	fi
	1359
	1360	# first load modules, if given
	1361	if [[ "$modules" != "" ]]
	1362	then
[678]	1363	if [[ $remote_host = lctit ]]
	1364	then
	1365	. $modules
	1366	else
	1367	module load ${modules}
	1368	fi
[544]	1369	fi
	1370
	1371
[475]	1372	if [[ $compile_utility_programs = false ]]
	1373	then
[22]	1374
[475]	1375	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1376	eval remote_md=$remote_md
	1377	if [[ ! -d $remote_md ]]
[40]	1378	then
[475]	1379	if mkdir $remote_md
[215]	1380	then
[475]	1381	printf "\n\n *** directory for make depository:"
	1382	printf "\n $remote_md"
	1383	printf "\n was created\n"
	1384	else
	1385	printf "\n +++ directory for make depository:"
	1386	printf "\n $remote_md"
	1387	printf "\n cannot be created"
	1388	locat=local_depository_path; exit
[215]	1389	fi
[475]	1390	fi
[215]	1391
[475]	1392	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1393	echo " "
	1394	echo " *** updating sources in $remote_md"
	1395	cd $remote_md
	1396	cp $local_source_path/${mainprog}_sources.tar .
	1397	tar xf ${mainprog}_sources.tar
[215]	1398
[475]	1399	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1400	echo " "
	1401	echo " *** execute \"make\" on local host"
[1]	1402
[475]	1403	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1404
[475]	1405	if [[ $? != 0 ]]
	1406	then
	1407	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1408	if [[ $silent = false ]]
[1]	1409	then
[475]	1410	answer=dummy
	1411	printf "\n"
	1412	while [[ "$answer" != c && "$answer" != k ]]
	1413	do
	1414	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1415	read answer
	1416	if [[ "$answer" = l ]]
[1]	1417	then
[475]	1418	more ${remote_host}_last_make_protokoll
[1]	1419	fi
[475]	1420	done
	1421	if [[ $answer = k ]]
	1422	then
	1423	locat=user_abort; exit
[1]	1424	fi
	1425	fi
[475]	1426	fi
[1]	1427
	1428
[503]	1429	# TAR NEW VERSION ON LOCAL HOST
[475]	1430	printf "\n *** tar update on local host ..."
	1431	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1432
[22]	1433
[475]	1434	# COMPILE THE UTILITY PROGRAMS
	1435	elif [[ $compile_utility_programs = true ]]
	1436	then
	1437	printf "\n\n"
	1438	echo " *** compiling the utility programs ..."
	1439	cd ${local_source_path}/../UTIL
[503]	1440
	1441	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1442	touch *.f90
	1443	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1444
[807]	1445	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1446	if [[ $util_compiled_localhost == false ]]
	1447	then
	1448	printf "\n\n"
	1449	echo " *** compiling the mrun GUI"
	1450	if which qmake >/dev/null; then
	1451	cd mrungui
	1452	touch *
	1453	qmake
	1454	make
	1455	make clean
	1456	rm Makefile
	1457	cd ..
	1458	else
	1459	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1460	fi
[793]	1461
[811]	1462	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1463
[811]	1464	printf "\n\n"
	1465	echo " *** compiling check_namelist_files ..."
[807]	1466
[892]	1467	# GET CHECK OPTIONS
	1468	line=""
	1469	found=false
	1470	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
	1471	while read line1
	1472	do
	1473
	1474	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1475	then
	1476	line="$line1"
	1477	fi
	1478
	1479	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1480	then
	1481	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
	1482	line="$line "
	1483	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
	1484	found=true
	1485	fi
	1486
	1487	done < $tmp_mbuild
	1488	copts_check="$copts_check -D__check -D__parallel"
	1489
[811]	1490	check_depository_path=${local_source_path}/../UTIL
	1491	cd $check_depository_path
	1492	mkdir check_tmp
	1493	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1494	cd check_tmp
	1495	tar -xf ${mainprog}_sources_check.tar
	1496	rm -rf ${mainprog}_sources_check.tar
[807]	1497
[1018]	1498	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
[811]	1499	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1500	mv check_namelist_files.tar $check_depository_path
	1501	mv check_namelist_files.x $PALM_BIN
	1502	cd $check_depository_path
	1503	rm -rf check_tmp
	1504	util_compiled_localhost=true
	1505	else
	1506	cd $check_depository_path
	1507	printf "\n\n"
[818]	1508	echo " *** skipped compilation of mrun GUI."
[811]	1509	printf "\n\n"
	1510	echo " *** skipped compilation of check_namelist_files."
	1511	fi
	1512
[1]	1513	fi
	1514	fi
	1515	done
	1516
	1517
	1518	if [[ $host_found = false ]]
	1519	then
	1520	if [[ $host = all ]]
	1521	then
	1522	printf "\n +++ no hosts found in configuration file"
	1523	else
	1524	printf "\n +++ host \"$host\" not found in configuration file"
	1525	fi
	1526	locat=config_file; exit
	1527	fi
	1528
[936]	1529	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
	1530	then
	1531	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
	1532	fi
[1]	1533
	1534
[503]	1535	# FINAL WORK
[1]	1536	rm -f hosts_found_in_config_file
[811]	1537	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1538

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |