Home

Context Navigation

source: palm/trunk/DOC/app/chapter_3.4.html @ 129

Last change on this file since 129 was 108, checked in by letzel, 17 years ago

Improved coupler: evaporation - salinity-flux coupling for humidity = .T.,

avoid MPI hangs when coupled runs terminate, add DOC/app/chapter_3.8;

Optional calculation of km and kh from initial TKE e_init;
Default initialization of km,kh = 0.00001 for ocean = .T.;
Allow data_output_pr= q, wq, w"q", w*q* for humidity = .T.;
Bugfix: Rayleigh damping for ocean fixed.

Property svn:keywords set to Id

File size: 105.0 KB

Rev	Line
[108]	1	<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
	2	<html>
	3	<head>
	4
	5
	6
	7	<meta content="text/html; charset=ISO-8859-1" http-equiv="content-type">
	8
	9
	10	<title>PALM chapter 3.4</title>
	11	</head>
	12
	13
	14	<body>
	15
	16
	17	<h3 style="line-height: 100%;"><font color="#000000">3.4
	18	Input and
	19	output files</font></h3>
	20
	21
	22	<p style="line-height: 100%;"></p>
	23
	24
	25	<p style="line-height: 100%;"><font color="#000000">The
	26	model works
	27	with a set of files, which are all located in the temporary working
	28	directory and which are either expected at the beginning of the run
	29	(the so-called input files) or which are
	30	produced during the run and/or at the end of the simulation (output
	31	files).</font><font color="#800000">
	32	<font color="#000000">The following table lists all
	33	default files
	34	addressed by the model. They are arranged according to the
	35	associated FORTRAN unit (unit number).</font> </font><font color="#000000">The
	36	unit 90 is used for different files, which are opened only briefly
	37	and uniquely in the model and closed directly afterwards.
	38	Unit numbers 101 - 109, 111 - 113, and 116 refer to data files
	39	which have NetCDF format.
	40	These are not opened by a FORTRAN-OPEN-statement but by a corresponding
	41	NetCDF call (NF90_CREATE or NF90_OPEN). These files are only created on
	42	machines where a NetCDF library is available.<br>
	43
	44
	45	</font></p>
	46
	47
	48	<p style="line-height: 100%;"><font color="#000000">The
	49	file
	50	names described in the list correspond to the names indicated in the
	51	respective OPEN instruction, i.e. the files are expected and saved
	52	under these names in the temporary working directory of the model. By
	53	default, file names are always written in capital letters. The
	54	third column indicates whether it is an input or output file (I
	55	and/or O). The NetCDF files can be both input and output files (I/O).
	56	If restart jobs shall append data to an existing NetCDF file (created
	57	by a previous job of the job chain), the respective file has to be
	58	given as an input file (see also <a href="../app/chapter_4.5.1.html">chapter
	59	4.5.1</a> which gives more details about the PALM-NetCDF-output).</font>
	60	</p>
	61
	62
	63	<p style="line-height: 100%;"> </p>
	64
	65
	66	<p style="line-height: 100%;"><font color="#000000">On
	67	parallel
	68	computers many of the files are read and/or written by the central
	69	processing element 0 (PE0) only. These files have processor-independent
	70	content (and therefore they can be read or written by other
	71	PEs just as well). However, certain files have processor-dependent
	72	content. For the binary output of data for restart runs (local file
	73	<a href="#BINOUT">BINOUT</a>),
	74	for example, <font color="#000000">each PE outputs only
	75	the data of
	76	its subdomain. So each processing element writes
	77	into its own file with its own file name. These files lie in a
	78	subdirectory of the temporary working directory. Their names are build
	79	off from the underline ("_ ") and the four digit
	80	processor ID. The data written for restart runs would be e.g. on the
	81	files BINOUT/_0000 (PE0), BINOUT/_0001 (PE1), BINOUT/_0002 (PE2) etc.
	82	Such files, which have processor-dependent content on parallel
	83	computers, are marked in the following list by the fact, that to the
	84	file name a line (”/“) is attached. If appropriate
	85	output
	86	files are to be copied through <b>mrun</b> to permanent
	87	files, and/or
	88	files with processor-dependent content are supposed to be copied as
	89	input files into the temporary working directory of the model, you have
	90	to indicate a special file attribute in the appropriate file
	91	connection statement </font>(see <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#arpe">arpe</a>,
	92	<a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#flpe">flpe</a>
	93	<font color="#000000">in the <b>mrun </b>description).</font><font color="#800000">
	94	</font><font color="#000000">Then the permanent file
	95	name will be
	96	interpreted as a directory name, in which the input files are
	97	expected and/or to which output files are written. The file names in
	98	these directories are always named _0000, _0001, _0002 etc. </font>
	99	</font></p>
	100
	101
	102	<p><font color="#000000"><font color="#000000">For
	103	internal use,
	104	the model may open a set of further files, which are not
	105	defined by the user but contain no usable information and
	106	therefore are not included in this list.</font></font></p>
	107	<p><font color="#000000"><font color="#000000">
	108
	109	<a name="coupled"></a>In case of <a href="chapter_3.8.html">coupled</a> atmosphere-ocean
	110	runs (see <a href="chapter_3.8.html">chapter 3.8</a>),
	111	both the atmosphere and the </font></font><font color="#000000"><font color="#000000"><a href="chapter_4.1.html#ocean">ocean</a> executable use
	112	the same temporary working directory. However, each executable requires its own, unique set of files for I/O. In order to
	113	distinguish between atmosphere and ocean files, coupled </font></font><font color="#000000"><font color="#000000">atmosphere-ocean
	114	</font></font><font color="#000000"><font color="#000000">runs use the </font></font><font color="#000000"><font color="#000000">following
	115	filename convention</font></font><font color="#000000"><font color="#000000">. </font></font><font color="#000000"><font color="#000000">The
	116	atmosphere executable uses the set of normal filenames given in the
	117	table below. The ocean executable uses a set of modified filenames that
	118	have the string '_O' added to their normal name. The coupled
	119	ocean filenames are given in brackets in the table below where
	120	applicable. The string '_O' is simply appended </font></font><font color="#000000"><font color="#000000">to most
	121	filenames</font></font><font color="#000000"><font color="#000000">; exceptions are highlighted in bold face. (<span style="font-weight: bold;">Note:</span> uncoupled
	122	ocean runs use the normal set of filenames without '_O'.)</font></font></p>
	123	<p></p>
	124	<font color="#000000"><font color="#000000">
	125
	126	<br>
	127
	128
	129	</font>
	130	<table style="text-align: left; width: 100%;" border="1" cellpadding="2" cellspacing="2">
	131
	132
	133	<tbody>
	134
	135
	136	<tr valign="top">
	137
	138
	139	<td width="8%">
	140
	141	<p><font size="4"><b>Unit</b></font></p>
	142
	143
	144	</td>
	145
	146
	147	<td width="12%">
	148
	149	<p><font size="4"><b>Name</b></font></p>
	150
	151
	152	</td>
	153
	154
	155	<td width="4%">
	156
	157	<p><font size="4"><b>I/O</b></font></p>
	158
	159
	160	</td>
	161
	162
	163	<td width="9%">
	164
	165	<p><font size="4"><b>Format</b></font></p>
	166
	167
	168	</td>
	169
	170
	171	<td colspan="1" width="67%">
	172
	173	<p><font size="4"><b>Description/contents</b></font></p>
	174
	175
	176	</td>
	177
	178
	179	</tr>
	180
	181
	182	<tr valign="top">
	183
	184
	185	<td style="text-align: center;" width="8%"> 11<br>
	186
	187
	188	</td>
	189
	190
	191	<td width="12%">
	192
	193	<p><a name="PARIN"></a>PARIN<br>
	194
	195
	196	(PARIN_O)</p>
	197
	198
	199	</td>
	200
	201
	202	<td width="4%">
	203
	204	<p align="center">I</p>
	205
	206
	207	</td>
	208
	209
	210	<td style="width: 9%;">
	211
	212	<p>ASCII/  <br>
	213
	214
	215	NAMELIST</p>
	216
	217
	218	</td>
	219
	220
	221	<td colspan="1" width="67%">
	222
	223	<p><font color="#000000">Parameter
	224	for model steering. This file
	225	is needed by the model in each case. Its content and structure is
	226	described in detail in</font> <a href="chapter_4.0.html">chapter
	227	4.0</a>. <a href="chapter_4.4.1.html">Chapter
	228	4.4.1</a> <font color="#000000">shows a simple
	229	example. </font> </p>
	230
	231
	232	</td>
	233
	234
	235	</tr>
	236
	237
	238	<tr valign="top">
	239
	240
	241	<td style="text-align: center;" width="8%">
	242
	243	<p align="center">13</p>
	244
	245
	246	</td>
	247
	248
	249	<td width="12%">
	250
	251	<p><a name="BININ"></a>BININ/<br>
	252
	253
	254	(BININ<span style="font-weight: bold;">_O</span>/)</p>
	255
	256
	257	</td>
	258
	259
	260	<td width="4%">
	261
	262	<p align="center">I</p>
	263
	264
	265	</td>
	266
	267
	268	<td width="9%">
	269
	270	<p>Binary</p>
	271
	272
	273	</td>
	274
	275
	276	<td colspan="1" width="67%">
	277
	278	<p>Binary data,
	279	which are read in by the model at the beginning
	280	of a restart run (see <a href="chapter_3.3.html">chapter
	281	3.3</a>). The appropriate file must have been written by the
	282	preceding
	283	job of the job chain (see <a href="#BINOUT">BINOUT</a>).
	284	This file contains the initial parameters (see <a href="chapter_4.1.html">chapter
	285	4.1</a>) of the job chain, arrays of the prognostic and
	286	diagnostic
	287	variables as well as those parameters and variables for plots of
	288	horizontally averaged vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>),
	289	which have been determined by the job chain so far. Concerning runs on
	290	several processors it has to be noted that each processing element
	291	reads its own file and the file content is processor-dependent. The
	292	number of processors which can be used must not be changed during a job
	293	chain and/or if a job chain is continued.  </p>
	294
	295
	296
	297	<p>Knowledge
	298	of the file structure is usually not necessary,
	299	because the file is produced and also read again by the model, but it
	300	can be useful for error determination in case of read errors .
	301	Therefore the file structure is described in the following.  </p>
	302
	303
	304
	305	<p>The first record of this file contains a version number
	306	(ten
	307	character string) of the subroutine, which, which output the data that
	308	follows (write_var_list.f90). This number has to
	309	agree with the version number subroutine which is reading the file
	310	(read_var_list.f90) in case of a restart run. Otherwise the model run
	311	is aborted. Version numbers are changed whenever new code revisions
	312	require a change of the file format.  </p>
	313
	314
	315
	316	<p>Starting
	317	from the second record, all initial parameters follow
	318	(exception: <a href="chapter_4.1.html#initializing_actions">initializing_actions</a>),
	319	whereby each parameter fills two records. In the first record the name
	320	of the parameter is saved as a character string (30 characters long,
	321	short names are filled by trailing blanks, longer names are cut off at
	322	the end), in the second record the value (or the values) of the
	323	parameter follow. The sequence of parameters on the file may be
	324	arbitrary, however the first and second variable must be <a href="chapter_4.1.html#nz">nz</a>
	325	and <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>.
	326	If a variable with unknown name is found the model run is
	327	aborted.  </p>
	328
	329
	330
	331	<p>At the end of the initial
	332	parameters a record with the string "<i>***
	333	end ***</i>"follows (filled up with trailing blanks up to a
	334	length of
	335	30 characters).  </p>
	336
	337
	338
	339	<p>Afterwards the fields
	340	of the prognostic and diagnostic
	341	variables follow. This part of the file also begins with a record
	342	consisting of a character string of length 10, which contains the
	343	version number of the subroutine that wrote the arrays that follow
	344	(write_3d_binary.f90). It must agree with the number of the reading
	345	subroutine (read_3d_binary.f90).  </p>
	346
	347
	348
	349	<p>The
	350	following record contains the number of processors which
	351	were used in the model run producing this file, the processor ID of the
	352	special processor, which creates the file, as well as the lower and
	353	upper array indices of the subdomain belonging to this processing
	354	element. If no complete agreement with the values of the current model
	355	run exists, then this is aborted. This examination must be made in
	356	particular on parallel computers, because the jobs of a job chain
	357	always have to use the same number of processors and the same virtual
	358	processor grid.  </p>
	359
	360
	361
	362	<p>After these tests the
	363	individual arrays as well as parameters
	364	and variables for plots of horizontally averaged vertical profiles
	365	follow. Like the initialization parameters, they consist of two
	366	records. In the first record, the name of the array or the variable
	367	(character string, consisting of 20 characters, filled with trailing
	368	blanks) is located, in the second one its values follow. The sequence
	369	of the individual variables may be arbitrary again. The parameters for
	370	the plot and the respective variables are only read in if for the run
	371	parameter <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	372	= <i>.TRUE</i> is selected, otherwise they will be
	373	skipped.  </p>
	374
	375
	376
	377	<p>At the end of the file there
	378	has to be a record with the
	379	character string "<span style="font-style: italic;"></span><i>***
	380	end
	381	***</i>"(filled up with trailing blanks up to a length of 20
	382	characters).</p>
	383
	384
	385	</td>
	386
	387
	388	</tr>
	389
	390
	391	<tr valign="top">
	392
	393
	394	<td style="text-align: center;" width="8%">
	395
	396	<p align="center">14</p>
	397
	398
	399	</td>
	400
	401
	402	<td width="12%">
	403
	404	<p><a name="BINOUT"></a>BINOUT/<br>
	405
	406
	407	(BINOUT<span style="font-weight: bold;">_O</span>/)</p>
	408
	409
	410	</td>
	411
	412
	413	<td width="4%">
	414
	415	<p align="center">O</p>
	416
	417
	418	</td>
	419
	420
	421	<td width="9%">
	422
	423	<p>Binary</p>
	424
	425
	426	</td>
	427
	428
	429	<td colspan="1" width="67%">
	430
	431	<p>Binary data,
	432	which are written by the model at the end of the
	433	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
	434	3.3</a>) for the initialization. This output file is then read in
	435	as
	436	file <a href="#BININ">BININ</a>.
	437	It contains the initial parameters (see <a href="chapter_4.1.html">chapter
	438	4.1</a>) of the model run, arrays of the prognostic and
	439	diagnostic
	440	variables as well as those parameters determined so far during a job
	441	chain and variables for plots of horizontally averaged vertical
	442	profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>).
	443	With runs on several processors it has to be noted that each processing
	444	element writes its own file and the file content is
	445	processor-dependent. A specification of the file format can be found in
	446	the
	447	description of the file <a href="#BININ">BININ</a>.
	448	</p>
	449
	450
	451
	452	<p>The file BINOUT is written by the model only if,
	453	with the help
	454	of the <b>mrun</b>-configuration file, the <font face="Thorndale, serif">value</font> <span style="font-family: monospace;">true</span> is
	455	assigned for the
	456	environment
	457	variable <span style="font-size: 10pt; font-family: monospace;">write_binary</span>
	458	(see <a href="chapter_3.3.html">chapter
	459	3.3</a>).  </p>
	460
	461
	462
	463	<p>With large grid point
	464	numbers the file BINOUT (or the
	465	files residing in directory BINOUT/) will be very large and should
	466	be stored (if available) on the archive system of the remote computer.</p>
	467
	468
	469	</td>
	470
	471
	472	</tr>
	473
	474
	475	<tr>
	476
	477
	478	<td style="vertical-align: top; text-align: center;">15<br>
	479
	480
	481	</td>
	482
	483
	484	<td style="vertical-align: top;"><a name="RUN_CONTROL"></a>RUN_CONTROL<br>
	485
	486
	487	(RUN_CONTROL_O)</td>
	488
	489
	490	<td style="vertical-align: top;">O</td>
	491
	492
	493	<td style="vertical-align: top;">Ascii</td>
	494
	495
	496	<td colspan="1" width="67%">
	497
	498	<p>This file contains
	499	the so-called time step control output of
	500	the model. At certain temporal intervals, which are described by the
	501	run
	502	parameter <a href="chapter_4.1.html#dt_run_control">dt_run_control</a>,
	503	a line with the values of certain control parameters is written into
	504	this
	505	file. Additionally, such a control line is always written, whenever the
	506	time step of the model changes. All data and quantities always refer to
	507	the entire model domain.  </p>
	508
	509
	510
	511	<p>If the
	512	1D-model is switched on for the initialization of the
	513	3D-models, then control lines are likewise written into this file at
	514	certain temporal intervals (see <a href="chapter_4.1.html#dt_run_control_1d">dt_run_control_1d</a>).
	515	</p>
	516
	517
	518
	519	<p>By default, the file RUN_CONTROL only lists
	520	information
	521	about the selected model parameters at the beginning of the
	522	initial run. These informations are written at the beginnning of a run.
	523	They correspond to those of the file <a href="#HEADER">HEADER</a>
	524	(however without data concerning the consumed CPU time, because these
	525	are
	526	only known at the end of a run). With the run parameter <a href="chapter_4.2.html#force_print_header">force_print_header</a>
	527	it can be achieved that this information is also written at the
	528	beginning of the file RUN_CONTROL at restart runs.  </p>
	529
	530
	531
	532	<p>The individual columns of the 1D - time step control
	533	output
	534	have the following meaning (listed by the respective heading of the
	535	appropriate
	536	column in the file):  <br>
	537
	538
	539	</p>
	540
	541
	542
	543	<table style="text-align: left; width: 100%;" cellpadding="2">
	544
	545
	546	<tbody>
	547
	548
	549	<tr>
	550
	551
	552	<td style="vertical-align: top;">ITER.</td>
	553
	554
	555	<td style="vertical-align: top;">Number of
	556	time steps
	557	accomplished so far</td>
	558
	559
	560	</tr>
	561
	562
	563	<tr>
	564
	565
	566	<td style="vertical-align: top;">HH:MM:SS</td>
	567
	568
	569	<td style="vertical-align: top;">Time (in
	570	hours: minutes:
	571	seconds)</td>
	572
	573
	574	</tr>
	575
	576
	577	<tr>
	578
	579
	580	<td style="vertical-align: top;">DT</td>
	581
	582
	583	<td style="vertical-align: top;">Time step (in
	584	s)</td>
	585
	586
	587	</tr>
	588
	589
	590	<tr>
	591
	592
	593	<td style="vertical-align: top;">UMAX</td>
	594
	595
	596	<td style="vertical-align: top;">Maximum
	597	absolute wind
	598	velocity
	599	(u-component) (in m/s)</td>
	600
	601
	602	</tr>
	603
	604
	605	<tr>
	606
	607
	608	<td style="vertical-align: top;">VMAX</td>
	609
	610
	611	<td style="vertical-align: top;">Maximum
	612	absolute wind
	613	velocity
	614	(v-component) (in m/s)</td>
	615
	616
	617	</tr>
	618
	619
	620	<tr>
	621
	622
	623	<td style="vertical-align: top;">U *</td>
	624
	625
	626	<td style="vertical-align: top;">Friction
	627	velocity (<font color="#000000">in </font>m/s)</td>
	628
	629
	630	</tr>
	631
	632
	633	<tr>
	634
	635
	636	<td style="vertical-align: top;">ALPHA</td>
	637
	638
	639	<td style="vertical-align: top;">Angle of the
	640	wind vector
	641	(to the x-axis) at the top of the
	642	Prandtl layer (k=1) (<font color="#000000">in </font>degrees)</td>
	643
	644
	645	</tr>
	646
	647
	648	<tr>
	649
	650
	651	<td style="vertical-align: middle;">ENERG.</td>
	652
	653
	654	<td style="vertical-align: top;">Kinetic
	655	energy of the
	656	1D-model (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
	657	averaged over all grid points</td>
	658
	659
	660	</tr>
	661
	662
	663
	664	</tbody>
	665
	666	</table>
	667
	668
	669
	670	<p>
	671	The individual columns of the 3D - time step control output
	672	have the following meaning (listed by the respective heading of the
	673	appropriate
	674	column in the file):<br>
	675
	676
	677	</p>
	678
	679
	680
	681	<table style="text-align: left; width: 100%;" cellpadding="2">
	682
	683
	684	<tbody>
	685
	686
	687	<tr>
	688
	689
	690	<td style="vertical-align: top;">RUN</td>
	691
	692
	693	<td style="vertical-align: top;">Serial-number
	694	of the job
	695	in the job chain. The initial
	696	run has the number 0, restart runs accordingly have larger numbers.</td>
	697
	698
	699	</tr>
	700
	701
	702	<tr>
	703
	704
	705	<td style="vertical-align: top;">ITER.</td>
	706
	707
	708	<td style="vertical-align: top;">Number of
	709	time steps
	710	accomplished since starting time t=0 of
	711	the initial run.</td>
	712
	713
	714	</tr>
	715
	716
	717	<tr>
	718
	719
	720	<td style="vertical-align: top;">HH:MM:SS</td>
	721
	722
	723	<td style="vertical-align: top;">Time (<font color="#000000">in </font>hours: minutes:
	724	seconds) since starting time t=0 of the
	725	initial run.</td>
	726
	727
	728	</tr>
	729
	730
	731	<tr>
	732
	733
	734	<td style="vertical-align: top;">DT (E)</td>
	735
	736
	737	<td style="vertical-align: top;">Time step (<font color="#000000">in </font>s). The
	738	following character indicates whether the
	739	time
	740	step is limited by the advection criterion (A) or the diffusion
	741	criterion (D). After changes of the time step a further character
	742	follows,
	743	which indicates with which time step procedure the changed time step
	744	was accomplished (<span style="font-family: monospace;">L:</span>
	745	Leapfrog, <span style="font-family: monospace;">E:</span>
	746	Euler). This
	747	does
	748	not apply for the default Runge-Kutta timestep scheme.</td>
	749
	750
	751	</tr>
	752
	753
	754	<tr>
	755
	756
	757	<td style="vertical-align: top;">UMAX</td>
	758
	759
	760	<td style="vertical-align: top;">Maximum
	761	absolute wind
	762	velocity (u-component) (<font color="#000000">in </font>m/s).
	763	If at
	764	the
	765	appropriate output time a random disturbance was added to the
	766	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
	767	the character D will appear directly after the velocity value.</td>
	768
	769
	770	</tr>
	771
	772
	773	<tr>
	774
	775
	776	<td style="vertical-align: top;">VMAX</td>
	777
	778
	779	<td style="vertical-align: top;">Maximum
	780	absolute wind
	781	velocity (v-component) (<font color="#000000">in </font>m/s).
	782	If at
	783	the
	784	appropriate output time a random disturbance was added to the
	785	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
	786	the character D will appear directly after the velocity value.</td>
	787
	788
	789	</tr>
	790
	791
	792	<tr>
	793
	794
	795	<td style="vertical-align: top;">WMAX</td>
	796
	797
	798	<td style="vertical-align: top;">Maximum
	799	absolute wind
	800	velocity (w-component) (<font color="#000000">in </font>m/s).</td>
	801
	802
	803	</tr>
	804
	805
	806	<tr>
	807
	808
	809	<td style="vertical-align: top;">U
	810	*</td>
	811
	812
	813	<td style="vertical-align: top;">Horizontal
	814	average of the
	815	friction velocity (<font color="#000000">in </font>m/s).</td>
	816
	817
	818	</tr>
	819
	820
	821	<tr>
	822
	823
	824	<td style="vertical-align: top;">W
	825	*</td>
	826
	827
	828	<td style="vertical-align: top;">Convective
	829	velocity scale
	830	(<font color="#000000">in </font>m/s). The assumed
	831	boundary layer
	832	height is determined via the heat flux minimum criterion.</td>
	833
	834
	835	</tr>
	836
	837
	838	<tr>
	839
	840
	841	<td style="vertical-align: top;">THETA *</td>
	842
	843
	844	<td style="vertical-align: top;">Characteristic
	845	temperature
	846	of the Prandtl - layer (<font color="#000000">in </font>K).</td>
	847
	848
	849	</tr>
	850
	851
	852	<tr>
	853
	854
	855	<td style="vertical-align: top;">Z_I</td>
	856
	857
	858	<td style="vertical-align: top;">Height of the
	859	convective
	860	boundary layer (<font color="#000000">in </font>m),
	861	determined via
	862	the criterion of the heat flux minimum.</td>
	863
	864
	865	</tr>
	866
	867
	868	<tr>
	869
	870
	871	<td style="vertical-align: middle;">ENERG.</td>
	872
	873
	874	<td style="vertical-align: top;">Average
	875	resolved total
	876	energy of the flow field (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
	877	normalized with the total number of grid points.</td>
	878
	879
	880	</tr>
	881
	882
	883	<tr>
	884
	885
	886	<td style="vertical-align: middle;">DISTENERG</td>
	887
	888
	889	<td style="vertical-align: top;">Average
	890	resolved
	891	disturbance energy of flow field (<font color="#000000">in
	892	</font>m<sup>2</sup>/s<sup>2</sup>),
	893	normalized with the total number of grid points.</td>
	894
	895
	896	</tr>
	897
	898
	899	<tr>
	900
	901
	902	<td style="vertical-align: top;">DIVOLD</td>
	903
	904
	905	<td style="vertical-align: top;"><font color="#000000">Divergence
	906	of the velocity field (sum of
	907	the absolute values) (</font><font color="#000000">in
	908	</font><font color="#000000">1/s) before
	909	call of the
	910	pressure solver,
	911	normalized with the total number of grid points.</font></td>
	912
	913
	914	</tr>
	915
	916
	917	<tr>
	918
	919
	920	<td style="vertical-align: top;">DIVNEW</td>
	921
	922
	923	<td style="vertical-align: top;"><font color="#000000">Divergence
	924	of the velocity field (sum of
	925	the absolute values) (</font><font color="#000000">in
	926	</font><font color="#000000">1/s) after
	927	call of the
	928	pressure solver, normalized</font>
	929	with the total number of grid points.</td>
	930
	931
	932	</tr>
	933
	934
	935	<tr>
	936
	937
	938	<td style="vertical-align: top;">UMAX (KJI)</td>
	939
	940
	941	<td style="vertical-align: top;">Indices of
	942	the grid point
	943	with the maximum absolute
	944	u-component of the wind velocity (sequence: k, j, i).</td>
	945
	946
	947	</tr>
	948
	949
	950	<tr>
	951
	952
	953	<td style="vertical-align: top;">VMAX (KJI)</td>
	954
	955
	956	<td style="vertical-align: top;">Indices of
	957	the grid point
	958	with the maximum absolute
	959	v-component of the wind velocity (sequence: k, j, i).</td>
	960
	961
	962	</tr>
	963
	964
	965	<tr>
	966
	967
	968	<td style="vertical-align: top;">WMAX (KJI)</td>
	969
	970
	971	<td style="vertical-align: top;">Indices of
	972	the grid point
	973	with the maximum absolute
	974	w-component of the wind velocity (sequence: k, j, i).</td>
	975
	976
	977	</tr>
	978
	979
	980	<tr>
	981
	982
	983	<td style="vertical-align: top;">ADVECX</td>
	984
	985
	986	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
	987	coordinate system has been moved in
	988	x-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
	989
	990
	991	</tr>
	992
	993
	994	<tr>
	995
	996
	997	<td style="vertical-align: top;">ADVECY</td>
	998
	999
	1000	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
	1001	coordinate system has been moved in
	1002	y-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
	1003
	1004
	1005	</tr>
	1006
	1007
	1008
	1009	</tbody>
	1010
	1011	</table>
	1012
	1013
	1014	</td>
	1015
	1016
	1017	</tr>
	1018
	1019
	1020	<tr>
	1021
	1022
	1023	<td style="vertical-align: top; text-align: center;">16<br>
	1024
	1025
	1026	</td>
	1027
	1028
	1029	<td style="vertical-align: top;"><a name="LIST_PROFIL"></a>LIST_PROFIL<br>
	1030
	1031
	1032	(LIST_PROFIL_O) </td>
	1033
	1034
	1035	<td style="vertical-align: top;">O<br>
	1036
	1037
	1038	</td>
	1039
	1040
	1041	<td style="vertical-align: top;">Ascii<br>
	1042
	1043
	1044	</td>
	1045
	1046
	1047	<td style="vertical-align: top;">This file contains
	1048	horizontally
	1049	(and possibly temporally)
	1050	averaged vertical profiles of some model variables. The quantities
	1051	saved are set model-internally and can not be determined by the user.
	1052	At each output time (see <a href="chapter_4.2.html#dt_dopr_listing">dt_dopr_listing</a>)
	1053	two tables are written to the file consecutively. The first contains
	1054	variables which are defined on the scalar / u-v-grid-levels, the
	1055	second table contains variables which are defined on the w-grid-levels.
	1056	If subdomains were defined with the initialization parameter <a href="chapter_4.1.html#statistic_regions">statistic_regions </a>for
	1057	additional statistic evaluation, then the tables
	1058	described above are written for each individual subdomain. The name of
	1059	the respective subdomain (see <a href="chapter_4.3.html#region">region</a>)
	1060	appears in the header of the respective table. <br>
	1061
	1062
	1063	In each case the tables consist of a header, followed by the
	1064	profiles arranged next to each other in columns. The header contains
	1065	some basic information of the respective run (model version, run
	1066	identifier consisting of
	1067	basic file name and number of the job in the job chain, executing
	1068	computer, date, time of the beginning of the run, name of the
	1069	subdomain, output time, kind of averaging). On the u-v-level the
	1070	following columns are written: <br>
	1071
	1072
	1073
	1074	<table style="text-align: left; width: 100%;" cellpadding="2">
	1075
	1076
	1077	<tbody>
	1078
	1079
	1080	<tr>
	1081
	1082
	1083	<td style="text-align: left; vertical-align: middle;">k<br>
	1084
	1085
	1086	</td>
	1087
	1088
	1089	<td style="text-align: left; vertical-align: middle;">Vertical
	1090	grid point index.</td>
	1091
	1092
	1093	</tr>
	1094
	1095
	1096	<tr>
	1097
	1098
	1099	<td style="text-align: left; vertical-align: middle;">zu<br>
	1100
	1101
	1102	</td>
	1103
	1104
	1105	<td style="text-align: left; vertical-align: middle;">Height
	1106	of the grid point
	1107	level (<font color="#000000">in </font>m).</td>
	1108
	1109
	1110	</tr>
	1111
	1112
	1113	<tr>
	1114
	1115
	1116	<td style="text-align: left; vertical-align: middle;">u<br>
	1117
	1118
	1119	</td>
	1120
	1121
	1122	<td style="text-align: left; vertical-align: middle;">u-component
	1123	of the wind
	1124	velocity (<font color="#000000">in </font>m/s).</td>
	1125
	1126
	1127	</tr>
	1128
	1129
	1130	<tr>
	1131
	1132
	1133	<td style="text-align: left; vertical-align: middle;">du<br>
	1134
	1135
	1136	</td>
	1137
	1138
	1139	<td style="text-align: left; vertical-align: middle;">Deviation
	1140	of the
	1141	u-component from the initial profile at the
	1142	time t=0 (initialization profile) (<font color="#000000">in
	1143	</font>m/s).</td>
	1144
	1145
	1146	</tr>
	1147
	1148
	1149	<tr>
	1150
	1151
	1152	<td style="text-align: left; vertical-align: middle;">v<br>
	1153
	1154
	1155	</td>
	1156
	1157
	1158	<td style="text-align: left; vertical-align: middle;">v-component
	1159	of the wind
	1160	velocity (<font color="#000000">in </font>m/s).</td>
	1161
	1162
	1163	</tr>
	1164
	1165
	1166	<tr>
	1167
	1168
	1169	<td style="text-align: left; vertical-align: middle;">dv<br>
	1170
	1171
	1172	</td>
	1173
	1174
	1175	<td style="text-align: left; vertical-align: middle;">Deviation
	1176	of the
	1177	v-component from the initial profile at the
	1178	time t=0 (initialization profile) (<font color="#000000">in
	1179	</font>m/s).</td>
	1180
	1181
	1182	</tr>
	1183
	1184
	1185	<tr>
	1186
	1187
	1188	<td style="text-align: left; vertical-align: middle;">pt
	1189	<br>
	1190
	1191
	1192	</td>
	1193
	1194
	1195	<td style="text-align: left; vertical-align: middle;">Potential
	1196	temperature (<font color="#000000">in </font>K).</td>
	1197
	1198
	1199	</tr>
	1200
	1201
	1202	<tr>
	1203
	1204
	1205	<td style="text-align: left; vertical-align: middle;">dpt<br>
	1206
	1207
	1208	</td>
	1209
	1210
	1211	<td style="text-align: left; vertical-align: middle;">Deviation
	1212	of potential
	1213	temperature from the initial profile at
	1214	the time t=0 (initialization profile) (<font color="#000000">in
	1215	</font>K).</td>
	1216
	1217
	1218	</tr>
	1219
	1220
	1221	<tr>
	1222
	1223
	1224	<td style="text-align: left; vertical-align: middle;">e<br>
	1225
	1226
	1227	</td>
	1228
	1229
	1230	<td style="text-align: left; vertical-align: middle;">Turbulent
	1231	kinetic energy
	1232	(subgrid-scale) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1233
	1234
	1235	</tr>
	1236
	1237
	1238	<tr>
	1239
	1240
	1241	<td style="text-align: left; vertical-align: middle;">Km<br>
	1242
	1243
	1244	</td>
	1245
	1246
	1247	<td style="text-align: left; vertical-align: middle;">Turbulent
	1248	diffusion
	1249	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1250
	1251
	1252	</tr>
	1253
	1254
	1255	<tr>
	1256
	1257
	1258	<td style="text-align: left; vertical-align: middle;">Kh<br>
	1259
	1260
	1261	</td>
	1262
	1263
	1264	<td style="text-align: left; vertical-align: middle;">Turbulent
	1265	diffusion
	1266	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1267
	1268
	1269	</tr>
	1270
	1271
	1272	<tr>
	1273
	1274
	1275	<td style="text-align: left; vertical-align: middle;">l<br>
	1276
	1277
	1278	</td>
	1279
	1280
	1281	<td style="text-align: left; vertical-align: middle;">Mixing
	1282	length (<font color="#000000">in </font>m).</td>
	1283
	1284
	1285	</tr>
	1286
	1287
	1288	<tr>
	1289
	1290
	1291	<td style="vertical-align: top;"><br>
	1292
	1293
	1294	</td>
	1295
	1296
	1297	<td style="vertical-align: top;"><br>
	1298
	1299
	1300	</td>
	1301
	1302
	1303	</tr>
	1304
	1305
	1306
	1307	</tbody>
	1308
	1309	</table>
	1310
	1311
	1312	On the w-level the following columns are written:<br>
	1313
	1314
	1315	<br>
	1316
	1317
	1318
	1319	<table style="text-align: left; width: 100%;" cellpadding="2">
	1320
	1321
	1322	<tbody>
	1323
	1324
	1325	<tr>
	1326
	1327
	1328	<td style="vertical-align: middle;">k<br>
	1329
	1330
	1331	</td>
	1332
	1333
	1334	<td style="vertical-align: middle;">Vertical
	1335	grid point
	1336	index.</td>
	1337
	1338
	1339	</tr>
	1340
	1341
	1342	<tr>
	1343
	1344
	1345	<td style="vertical-align: middle;">zw<br>
	1346
	1347
	1348	</td>
	1349
	1350
	1351	<td style="vertical-align: middle;">Height of
	1352	the grid
	1353	point
	1354	level (<font color="#000000">in </font>m).</td>
	1355
	1356
	1357	</tr>
	1358
	1359
	1360	<tr>
	1361
	1362
	1363	<td style="vertical-align: middle;">w'pt'</td>
	1364
	1365
	1366	<td style="vertical-align: middle;">Vertical
	1367	subgrid-scale
	1368	kinematic heat flux (<font color="#000000">in </font>K
	1369	m/s).</td>
	1370
	1371
	1372	</tr>
	1373
	1374
	1375	<tr>
	1376
	1377
	1378	<td style="vertical-align: middle;">wpt</td>
	1379
	1380
	1381	<td style="vertical-align: middle;">Vertical
	1382	total (
	1383	subgrid-scale + resolved)
	1384	kinematic heat flux (<font color="#000000">in </font>K
	1385	m/s).</td>
	1386
	1387
	1388	</tr>
	1389
	1390
	1391	<tr>
	1392
	1393
	1394	<td style="vertical-align: middle;">w'u'</td>
	1395
	1396
	1397	<td style="vertical-align: middle;">u-component
	1398	of the
	1399	vertical subgrid-scale momentum flux (<font color="#000000">in
	1400	</font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1401
	1402
	1403	</tr>
	1404
	1405
	1406	<tr>
	1407
	1408
	1409	<td style="vertical-align: middle;">wu</td>
	1410
	1411
	1412	<td style="vertical-align: middle;">u-component
	1413	of the
	1414	total
	1415	vertical momentum flux (
	1416	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1417
	1418
	1419	</tr>
	1420
	1421
	1422	<tr>
	1423
	1424
	1425	<td style="vertical-align: middle;">w'v'</td>
	1426
	1427
	1428	<td style="vertical-align: middle;">v-component
	1429	of the
	1430	vertical subgrid-scale momentum flux (<font color="#000000">in
	1431	</font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1432
	1433
	1434	</tr>
	1435
	1436
	1437	<tr>
	1438
	1439
	1440	<td style="vertical-align: middle;">wv</td>
	1441
	1442
	1443	<td style="vertical-align: middle;">v-component
	1444	of the
	1445	total
	1446	vertical momentum flux (
	1447	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1448
	1449
	1450	</tr>
	1451
	1452
	1453
	1454	</tbody>
	1455
	1456	</table>
	1457
	1458
	1459	<br>
	1460
	1461
	1462	</td>
	1463
	1464
	1465	</tr>
	1466
	1467
	1468	<tr>
	1469
	1470
	1471	<td style="vertical-align: top; text-align: center;">17
	1472	</td>
	1473
	1474
	1475	<td style="vertical-align: top;"><a name="LIST_PROFIL_1D"></a>LIST_PROFIL_1D<br>
	1476
	1477
	1478	(LIST_PROFIL_1D_O)</td>
	1479
	1480
	1481	<td style="vertical-align: top;">O </td>
	1482
	1483
	1484	<td style="vertical-align: top;">Ascii </td>
	1485
	1486
	1487	<td style="vertical-align: top;">This file contains
	1488	the vertical
	1489	profiles calculated by the
	1490	1D-model within initial runs. The quantities saved are set
	1491	model-internally and cannot be determined by the user. At the
	1492	respective output times (see <a href="chapter_4.1.html#dt_pr_1d">dt_pr_1d</a>)
	1493	a table with the following information is written to the file: The
	1494	table header contains some basic information of the respective run
	1495	(model version, run identifier consisting of basic file name and number
	1496	of the job in the
	1497	job chain (this number should always be 00, because the 1D-model is
	1498	only switched on at initial runs), executing computer, date,
	1499	time of the beginning of the run, output time). Afterwards the
	1500	following columns appear:<br>
	1501
	1502
	1503
	1504	<table style="text-align: left; width: 100%;" cellpadding="2">
	1505
	1506
	1507	<tbody>
	1508
	1509
	1510	<tr>
	1511
	1512
	1513	<td style="text-align: left; vertical-align: middle;">k<br>
	1514
	1515
	1516	</td>
	1517
	1518
	1519	<td style="text-align: left; vertical-align: middle;">Vertical
	1520	grid point index.</td>
	1521
	1522
	1523	</tr>
	1524
	1525
	1526	<tr>
	1527
	1528
	1529	<td style="text-align: left; vertical-align: middle;">zu<br>
	1530
	1531
	1532	</td>
	1533
	1534
	1535	<td style="text-align: left; vertical-align: middle;">Height
	1536	of the grid point
	1537	level (<font color="#000000">in </font>m).</td>
	1538
	1539
	1540	</tr>
	1541
	1542
	1543	<tr>
	1544
	1545
	1546	<td style="text-align: left; vertical-align: middle;">u<br>
	1547
	1548
	1549	</td>
	1550
	1551
	1552	<td style="text-align: left; vertical-align: middle;">u-component
	1553	of the wind
	1554	velocity (<font color="#000000">in </font>m/s).</td>
	1555
	1556
	1557	</tr>
	1558
	1559
	1560	<tr>
	1561
	1562
	1563	<td style="text-align: left; vertical-align: middle;">v<br>
	1564
	1565
	1566	</td>
	1567
	1568
	1569	<td style="text-align: left; vertical-align: middle;">v-component
	1570	of the wind
	1571	velocity (<font color="#000000">in </font>m/s).</td>
	1572
	1573
	1574	</tr>
	1575
	1576
	1577	<tr>
	1578
	1579
	1580	<td style="text-align: left; vertical-align: middle;">pt<br>
	1581
	1582
	1583	</td>
	1584
	1585
	1586	<td style="text-align: left; vertical-align: middle;">Potential
	1587	temperature (<font color="#000000">in </font>K).</td>
	1588
	1589
	1590	</tr>
	1591
	1592
	1593	<tr>
	1594
	1595
	1596	<td style="text-align: left; vertical-align: middle;">e<br>
	1597
	1598
	1599	</td>
	1600
	1601
	1602	<td style="text-align: left; vertical-align: middle;">Turbulent
	1603	kinetic energy (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
	1604
	1605
	1606	</tr>
	1607
	1608
	1609	<tr>
	1610
	1611
	1612	<td style="text-align: left; vertical-align: middle;">rif<br>
	1613
	1614
	1615	</td>
	1616
	1617
	1618	<td style="text-align: left; vertical-align: middle;">Flux
	1619	Richardson number</td>
	1620
	1621
	1622	</tr>
	1623
	1624
	1625	<tr>
	1626
	1627
	1628	<td style="text-align: left; vertical-align: middle;">Km<br>
	1629
	1630
	1631	</td>
	1632
	1633
	1634	<td style="text-align: left; vertical-align: middle;">Turbulent
	1635	diffusion
	1636	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1637
	1638
	1639	</tr>
	1640
	1641
	1642	<tr>
	1643
	1644
	1645	<td style="text-align: left; vertical-align: middle;">Kh<br>
	1646
	1647
	1648	</td>
	1649
	1650
	1651	<td style="text-align: left; vertical-align: middle;">Turbulent
	1652	diffusion
	1653	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
	1654
	1655
	1656	</tr>
	1657
	1658
	1659	<tr>
	1660
	1661
	1662	<td style="text-align: left; vertical-align: middle;">l<br>
	1663
	1664
	1665	</td>
	1666
	1667
	1668	<td style="text-align: left; vertical-align: middle;"><font color="#000000">Mixing
	1669	length (</font><font color="#000000">in </font><font color="#000000">m).</font></td>
	1670
	1671
	1672	</tr>
	1673
	1674
	1675
	1676	</tbody>
	1677
	1678	</table>
	1679
	1680
	1681	<br>
	1682
	1683
	1684	</td>
	1685
	1686
	1687	</tr>
	1688
	1689
	1690	<tr>
	1691
	1692
	1693	<td style="vertical-align: top; text-align: center;">18
	1694	</td>
	1695
	1696
	1697	<td style="vertical-align: top;"><a name="CPU_MEASURES"></a>CPU_MEASURES<br>
	1698
	1699
	1700	(CPU_MEASURES_O)</td>
	1701
	1702
	1703	<td style="vertical-align: top;">O </td>
	1704
	1705
	1706	<td style="vertical-align: top;">Ascii </td>
	1707
	1708
	1709	<td style="vertical-align: top;">Time measurements
	1710	are
	1711	accomplished through the subroutine <span style="font-family: monospace;">cpu_log.f90.</span><span style="font-size: 10pt;"></span> The file
	1712	CPU_MEASURES contains a header with some basic information of the
	1713	respective run
	1714	(model version, run identifier consisting of basic file name and
	1715	number of the job in the job chain, executing computer, date, time of
	1716	the beginning of the run) and afterwards two tables with data of CPU
	1717	times which have been consumed by certain model parts. The model parts
	1718	analyzed in the first table do not overlap and the CPU times needed for
	1719	them therefore approximately add up to the “total”
	1720	value given in the
	1721	first line of this table. In the second table (heading: special
	1722	measures) overlaps (in particular with the parts described in the first
	1723	table) are possible.  <br>
	1724
	1725
	1726	For each model part it is indicated in the following columns how much
	1727	CPU time was needed (absolutely and relative), and how often it was
	1728	called.  With runs on several processors the average values of
	1729	all
	1730	processors are indicated. In the case of parallel runs information for
	1731	those processors with the largest and smallest CPU time follow as
	1732	well as the standard deviation of all PEs from the average value. With
	1733	good
	1734	parallelization the CPU times on the individual processors should
	1735	differ only little from each other and the standard deviation should be
	1736	small.  </td>
	1737
	1738
	1739	</tr>
	1740
	1741
	1742	<tr>
	1743
	1744
	1745	<td style="vertical-align: top; text-align: center;">19
	1746	</td>
	1747
	1748
	1749	<td style="vertical-align: top;"><a name="HEADER"></a>HEADER<br>
	1750
	1751
	1752	(HEADER_O) </td>
	1753
	1754
	1755	<td style="vertical-align: top;">O </td>
	1756
	1757
	1758	<td style="vertical-align: top;">Ascii </td>
	1759
	1760
	1761	<td style="vertical-align: top;">
	1762
	1763	<p>Information about
	1764	the selected model parameters (physical and
	1765	numerical values) as well as general information about the
	1766	run.  </p>
	1767
	1768
	1769
	1770	<p>This file contains the values of
	1771	all important steering
	1772	parameters
	1773	(numerical procedures, computing grid and model dimensions, boundary
	1774	conditions, physical dimension, turbulence quantities, actions during
	1775	the simulation, 1D-model-parameters) as well as data concerning the
	1776	selected plot and list outputs. The headlines of the file list the
	1777	program version used, date and time of the beginning of the run, the
	1778	name of the executing computer, the run identifier (corresponds to the
	1779	selected base file name) and the number of the run (number of the
	1780	restart run). With parallel runs the number of processors as well as
	1781	the assigned virtual processor net also appear. After these headlines
	1782	run time and time step information appear (point of starting time,
	1783	related to t=0 of the initial run, end-time, time actually reached, CPU
	1784	time, etc.). If a model run is incorrectly terminated (e.g.
	1785	run time error or excess of the permitted CPU time), information over
	1786	the time reached and the necessary CPU time is missing (to understand:
	1787	the file HEADER is written twice by the model; once briefly after
	1788	beginning of the simulation (naturally here the information over the
	1789	time reached is missing etc.) and then briefly before the normal end of
	1790	the simulation. The second, now complete output overwrites the first
	1791	output.).  </p>
	1792
	1793
	1794
	1795	<p>At the end of the file,
	1796	information about the values of user
	1797	parameters (see <a href="chapter_3.7.html">chapter
	1798	3.7</a> and <a href="targetliste:chapter_1.0.html#chapter%204.3">chapter
	1799	4.3</a>) can be output by the user with the help of the
	1800	subroutine <tt><font style="font-size: 11pt;" size="2">user_header</font></tt>
	1801	(located in
	1802	the file <tt><font style="font-size: 10pt;" size="2">user_interface.f90</font></tt>).
	1803	If no user parameters were found, the string “<tt><font style="font-size: 10pt;" size="2">*** no user-defined
	1804	variables found</font></tt>”
	1805	appears at the end of the file.
	1806	If user parameters were indicated, the string “<tt><font style="font-size: 11pt;" size="2">user-defined
	1807	variables and actions</font></tt>”
	1808	is printed, followed by informations about the user-defined subdomains
	1809	for which
	1810	profiles and time series are output. All further information to appear
	1811	here, must be provided by the user (by appropriate
	1812	WRITE statements in <tt><font style="font-size: 10pt;" size="2">user_header</font></tt>).</p>
	1813
	1814
	1815	</td>
	1816
	1817
	1818	</tr>
	1819
	1820
	1821	<tr>
	1822
	1823
	1824	<td style="vertical-align: top; text-align: center;">21
	1825	</td>
	1826
	1827
	1828	<td style="vertical-align: top;"><a name="PLOT2D_XY"></a>PLOT2D_XY<br>
	1829
	1830
	1831	(PLOT2D_XY_O)</td>
	1832
	1833
	1834	<td style="vertical-align: top;">O<br>
	1835
	1836
	1837	</td>
	1838
	1839
	1840	<td style="vertical-align: top;">Binary<br>
	1841
	1842
	1843	</td>
	1844
	1845
	1846	<td style="vertical-align: top;">
	1847
	1848	<p>This file
	1849	contains data of the two-dimensional horizontal
	1850	cross sections written by the model (see <a href="chapter_4.2.html#data_output">data_output</a>)
	1851	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>
	1852	(the first record contains the coordinate information <tt><font style="font-size: 11pt;" size="2">dx</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">eta</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">hu</font></tt><font style="font-size: 11pt;" size="2">, <tt>ho</tt></font>,
	1853	then
	1854	the individual arrays follow). The data are visualized with the help of
	1855	ISO2D using
	1856	NAMELIST - parameter sets, which are directly written by the model to
	1857	the
	1858	local files <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	1859	and <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.
	1860	</p>
	1861
	1862
	1863
	1864	<p>With parallel runs and choice of <a href="chapter_4.2.html#data_output_2d_on_each_pe">data_output_2d_on_each_pe</a>
	1865	= <i>.T.</i> each processing element writes the data of
	1866	its subdomain
	1867	to a separate file with the name
	1868	PLOT2D_XY_<processor-Id>,
	1869	whereby <processor-Id> is a four digit number (e.g.
	1870	PLOT2D_XY_0000). These files are not suitable for ISO2D, but after the
	1871	end
	1872	of the model run they can be combined to one file readable by ISO2D
	1873	with
	1874	the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
	1875	This tool expects the files of the individual processing
	1876	elements under the names described above and outputs the combined file
	1877	under the name PLOT2D_XY. Usually it is called by an appropriate OUTPUT
	1878	- command (OC:) in the MRUN-configuration file. The tool writes
	1879	informative messages about the actions accomplished into the job
	1880	protocol (e.g., even if no files were found).
	1881	By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
	1882	possibly existing files of the other cross sections (xz and/or yz)
	1883	and three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
	1884	are also combined.  </p>
	1885
	1886
	1887
	1888	<p>Further information
	1889	about the output of plots of
	1890	two-dimensional cross sections is found in the description of the run
	1891	parameter <a href="chapter_4.2.html#data_output">data_output</a>.</p>
	1892
	1893
	1894	</td>
	1895
	1896
	1897	</tr>
	1898
	1899
	1900	<tr>
	1901
	1902
	1903	<td style="vertical-align: top; text-align: center;">22<br>
	1904
	1905
	1906	</td>
	1907
	1908
	1909	<td style="vertical-align: top;"><a name="PLOT2D_XZ"></a>PLOT2D_XZ<br>
	1910
	1911
	1912	(PLOT2D_XZ_O) </td>
	1913
	1914
	1915	<td style="vertical-align: top;">O<br>
	1916
	1917
	1918	</td>
	1919
	1920
	1921	<td style="vertical-align: top;">Binary<br>
	1922
	1923
	1924	</td>
	1925
	1926
	1927	<td style="vertical-align: top;">
	1928
	1929	<p>This file contains
	1930	the data of the xz
	1931	cross sections written by the model.  </p>
	1932
	1933
	1934	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	1935	applies to this file, respectively </td>
	1936
	1937
	1938	</tr>
	1939
	1940
	1941	<tr>
	1942
	1943
	1944	<td style="vertical-align: top; text-align: center;">23<br>
	1945
	1946
	1947	</td>
	1948
	1949
	1950	<td style="vertical-align: top;"><a name="PLOT2D_YZ"></a>PLOT2D_YZ<br>
	1951
	1952
	1953	<font color="#000000">(PLOT2D_YZ_O)</font></td>
	1954
	1955
	1956	<td style="vertical-align: top;">O<br>
	1957
	1958
	1959	</td>
	1960
	1961
	1962	<td style="vertical-align: top;">Binary<br>
	1963
	1964
	1965	</td>
	1966
	1967
	1968	<td style="vertical-align: top;">
	1969
	1970	<p>This file contains
	1971	the data of the xz
	1972	cross sections written by the model.  </p>
	1973
	1974
	1975	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	1976	applies to this file, respectively </td>
	1977
	1978
	1979	</tr>
	1980
	1981
	1982	<tr>
	1983
	1984
	1985	<td style="vertical-align: top; text-align: center;">27<br>
	1986
	1987
	1988	</td>
	1989
	1990
	1991	<td style="vertical-align: top;"><a name="PLOT2D_XY_LOCAL"></a>PLOT2D_XY_LOCAL<br>
	1992
	1993
	1994	(PLOT2D_XY_LOCAL_O)</td>
	1995
	1996
	1997	<td style="vertical-align: top;">O<br>
	1998
	1999
	2000	</td>
	2001
	2002
	2003	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2004
	2005
	2006	</td>
	2007
	2008
	2009	<td style="vertical-align: top;">
	2010
	2011	<p>NAMELIST -
	2012	parameter sets, with which the plot layout of the
	2013	data in the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	2014	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2015	This file contains the so-called local parameter set (NAMELIST - group
	2016	name: &LOCAL) required by ISO2D (one parameter set for each
	2017	field
	2018	present at the file PLOT2D_XY). After the model run these parameter
	2019	sets can be edited by the user, if neccessary.  </p>
	2020
	2021
	2022
	2023	<p>Additionally
	2024	ISO2D still needs another so-called global
	2025	parameter set. This is saved by the model to the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>.
	2026	Due to the fact that ISO2D expects global and local parameter sets on
	2027	one and the same
	2028	file, in fact the global parameter set first, the user has to append
	2029	the
	2030	contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
	2031	before the call of ISO2D (e.g. by an OUTPUT-command in the
	2032	MRUN-configuration file: “PLOT2D_XY_LOCAL >>
	2033	PLOT2D_XY_GLOBAL”).
	2034	This relatively pedantic proceeding is due to the fact that the model
	2035	can produce the file PLOT2D_XY_GLOBAL only at the end of the simulation
	2036	(only then e.g. when the final value of the global ISO2D - parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
	2037	is known), while the local parameter sets are written continuously
	2038	to the file PLOT2D_XY_LOCAL during the run.</p>
	2039
	2040
	2041	</td>
	2042
	2043
	2044	</tr>
	2045
	2046
	2047	<tr>
	2048
	2049
	2050	<td style="vertical-align: top; text-align: center;">28<br>
	2051
	2052
	2053	</td>
	2054
	2055
	2056	<td style="vertical-align: top;"><a name="PLOT2D_XZ_LOCAL"></a>PLOT2D_XZ_LOCAL<br>
	2057
	2058
	2059	<font color="#000000">(PLOT2D_XZ_LOCAL_O)</font>
	2060	</td>
	2061
	2062
	2063	<td style="vertical-align: top;">O<br>
	2064
	2065
	2066	</td>
	2067
	2068
	2069	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2070
	2071
	2072	</td>
	2073
	2074
	2075	<td style="vertical-align: top;">
	2076
	2077	<p>NAMELIST -
	2078	parameter sets, with which the plot layout of the
	2079	data in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
	2080	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2081	</p>
	2082
	2083
	2084
	2085	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
	2086	applies to this file, respectively. </p>
	2087
	2088
	2089	</td>
	2090
	2091
	2092	</tr>
	2093
	2094
	2095	<tr>
	2096
	2097
	2098	<td style="vertical-align: top; text-align: center;">29<br>
	2099
	2100
	2101	</td>
	2102
	2103
	2104	<td style="vertical-align: top;"><a name="PLOT2D_YZ_LOCAL"></a>PLOT2D_YZ_LOCAL<br>
	2105
	2106
	2107	<font color="#000000">(PLOT2D_YZ_LOCAL_O)</font></td>
	2108
	2109
	2110	<td style="vertical-align: top;">O<br>
	2111
	2112
	2113	</td>
	2114
	2115
	2116	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
	2117
	2118
	2119	</td>
	2120
	2121
	2122	<td style="vertical-align: top;">
	2123
	2124	<p>NAMELIST -
	2125	parameter sets, with which the plot layout of the
	2126	data in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
	2127	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
	2128	</p>
	2129
	2130
	2131
	2132	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
	2133	applies to this file, respectively. </p>
	2134
	2135
	2136	</td>
	2137
	2138
	2139	</tr>
	2140
	2141
	2142	<tr>
	2143
	2144
	2145	<td style="vertical-align: top; text-align: center;">30<br>
	2146
	2147
	2148	</td>
	2149
	2150
	2151	<td style="vertical-align: top;"><a name="PLOT3D_DATA"></a>PLOT3D_DATA<br>
	2152
	2153
	2154	(PLOT3D_DATA_O) </td>
	2155
	2156
	2157	<td style="vertical-align: top;">O<br>
	2158
	2159
	2160	</td>
	2161
	2162
	2163	<td style="vertical-align: top;">Binary<br>
	2164
	2165
	2166	</td>
	2167
	2168
	2169	<td style="vertical-align: top;">
	2170
	2171	<p>This file contains
	2172	the data of the three-dimensional arrays
	2173	(see <a href="chapter_4.2.html#data_output">data_output</a>)
	2174	written by the model in a format readable for the visualization
	2175	software AVS. Beyond that AVS
	2176	needs coordinate information, which are output into the
	2177	local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
	2178	as well as the local files <a href="#PLOT3D_FLD">PLOT3D_FLD</a>
	2179	and <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
	2180	which describe the structure of the files PLOT3D_DATA and PLOT3D_COOR
	2181	in the so-called AVS-FLD-format. Due to
	2182	the fact that AVS expects these information in only one (so-called FLD
	2183	-) file, the content of the file PLOT3D_FLD_COOR must be appended to
	2184	the file PLOT3D_FLD by the user after the end of the model run (e.g.
	2185	with an appropriate OUTPUT - command in the MRUN - configuration file: "<span style="font-family: monospace;">cat PLOT3D_FLD_COOR
	2186	>> PLOT3D_FLD</span>").  </p>
	2187
	2188
	2189
	2190	<p>With
	2191	parallel runs each processing element writes the data of
	2192	its subdomain to a separate file with the name
	2193	PLOT3D_DATA_<Processor-Id>, where
	2194	<Processor-Id> is a
	2195	four digit number (e.g. PLOT3D_DATA_0000). These files are not suitable
	2196	for AVS, but after the end of the model run they can be combined to one
	2197	file readable for AVS with the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
	2198	This tool expects the files of the individual processing
	2199	elements under the names described above and outputs the combined file
	2200	into a new file PLOT3D_DATA. Usually it is called by an appropriate
	2201	OUTPUT - command in the MRUN-configuration file. The tool
	2202	writes informative messages about the accomplished actions into
	2203	the job protocol (e.g., even if no files were
	2204	found). By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
	2205	also possibly existing files with two-dimensional plot data (see e.g. <a href="#PLOT2D_XY">PLOT2D_XY</a>)
	2206	are combined.  </p>
	2207
	2208
	2209
	2210	<p>With parallel runs the
	2211	output of data of large volume is also
	2212	possible in compressed form. For this purpose the initialization
	2213	parameter  <a href="chapter_4.2.html#do3d_compress">do3d_compress</a>
	2214	= <i>.TRUE.</i> must be set and the desired output
	2215	accuracy has to be
	2216	indicated
	2217	with the help of <a href="chapter_4.2.html#do3d_precision">do3d_precision</a>.
	2218	In favorable cases the file size can be reduced by
	2219	a factor of up to 5. For the visualization of compressed data a special
	2220	AVS module (<tt><font style="font-size: 11pt;" size="2">read_compressed_field</font></tt>)
	2221	and a further entry in the MRUN-configuration file are needed. More
	2222	details can be found in <a href="chapter_4.5.6.html">chapter
	2223	4.5.6</a>.</p>
	2224
	2225
	2226	</td>
	2227
	2228
	2229	</tr>
	2230
	2231
	2232	<tr>
	2233
	2234
	2235	<td style="vertical-align: top; text-align: center;">31<br>
	2236
	2237
	2238	</td>
	2239
	2240
	2241	<td style="vertical-align: top;"><a name="PLOT3D_COOR"></a>PLOT3D_COOR </td>
	2242
	2243
	2244	<td style="vertical-align: top;">O<br>
	2245
	2246
	2247	</td>
	2248
	2249
	2250	<td style="vertical-align: top;">Binary<br>
	2251
	2252
	2253	</td>
	2254
	2255
	2256	<td style="vertical-align: top;">
	2257
	2258	<p>Coordinate
	2259	information concerning
	2260	the three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
	2261	needed by the visualization software AVS.  </p>
	2262
	2263
	2264
	2265	<p>The
	2266	file PLOT3D_COOR should be saved by the user into the same
	2267	permanent directory as the file PLOT3D_DATA.  </p>
	2268
	2269
	2270
	2271	<p>For
	2272	parallel runs PLOT3D_COOR is written by PE0 only.</p>
	2273
	2274
	2275	</td>
	2276
	2277
	2278	</tr>
	2279
	2280
	2281	<tr>
	2282
	2283
	2284	<td style="vertical-align: top; text-align: center;">32<br>
	2285
	2286
	2287	</td>
	2288
	2289
	2290	<td style="vertical-align: top;"><a name="PLOT3D_FLD"></a>PLOT3D_FLD </td>
	2291
	2292
	2293	<td style="vertical-align: top;">O<br>
	2294
	2295
	2296	</td>
	2297
	2298
	2299	<td style="vertical-align: top;">Ascii/  <br>
	2300
	2301
	2302	AVS-Fld </td>
	2303
	2304
	2305	<td style="vertical-align: top;">
	2306
	2307	<p>AVS-fld-file
	2308	describing the three-dimensional
	2309	array data, saved by the model into the local file <a href="#PLOT3D_DATA">PLOT3D_DATA</a>,
	2310	needed by the visualization software AVS.  </p>
	2311
	2312
	2313
	2314	<p>This
	2315	file describes the structure of the file PLOT3D_DATA
	2316	(e.g. number of arrays, array dimensions, data type etc.). It uses the
	2317	so-called AVS-Fld-format. It also contains the name of the file
	2318	(inclusive cycle number, but without path) under which the local file
	2319	PLOT3D_DATA is saved (this is the file name given in the file
	2320	connection statement of the MRUN – configuration) in the
	2321	permanent
	2322	directory of the user (possibly on remote computers). Under this name
	2323	AVS expects the data which are to be visualized. If there is no file
	2324	connection statement for PLOT3D_DATA indicated in the configuration
	2325	file, that file (filename) is registered “unknown”
	2326	in the file
	2327	PLOT3D_FLD and the
	2328	actual name must be inserted later by hand. The file PLOT3D_FLD should
	2329	be saved by the user in the same permanent directory as PLOT3D_DATA, so
	2330	that AVS can find the file PLOT3D_DATA without any problems. If the two
	2331	files lie in different directories, then the path name of the file
	2332	PLOT3D_DATA must be added.  </p>
	2333
	2334
	2335
	2336	<p>AVS-fld-files
	2337	are expected by AVS to have the
	2338	suffix "<span style="font-family: monospace;">.fld</span>"<font face="Cumberland, monospace">.</font>
	2339	Cycle numbers must not be attached behind this "<span style="font-family: monospace;">.fld</span>" suffix.
	2340	This suffix is
	2341	attached to the permanent file names (still after
	2342	possible cycle numbers) by <span style="font-weight: bold;">mrun</span>
	2343	if "<span style="font-family: monospace;">fld</span>"
	2344	is indicated in the <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#Spalte6">column
	2345	6 </a>of the file connection statement.  </p>
	2346
	2347
	2348
	2349	<p>Likewise,
	2350	AVS expects information about the coordinate
	2351	system underlying the arrays on this file. This information is output
	2352	by the model
	2353	into the local file <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
	2354	whose content the user has to append to the file PLOT3D_FLD after the
	2355	end of the model run (e.g. with an appropriate OUTPUT-command in the
	2356	MRUN-configuration file: “cat PLOT3D_FLD_COOR
	2357	>>
	2358	PLOT3D_FLD”).  </p>
	2359
	2360
	2361
	2362	<p>For parallel
	2363	runs, PLOT3D_FLD is produced by PE0 only.</p>
	2364
	2365
	2366	</td>
	2367
	2368
	2369	</tr>
	2370
	2371
	2372	<tr>
	2373
	2374
	2375	<td style="vertical-align: top; text-align: center;">33
	2376	</td>
	2377
	2378
	2379	<td style="vertical-align: top;"><a name="PLOT3D_FLD_COOR"></a>PLOT3D_FLD_COOR </td>
	2380
	2381
	2382	<td style="vertical-align: top;">O<br>
	2383
	2384
	2385	</td>
	2386
	2387
	2388	<td style="vertical-align: top;">Ascii/  <br>
	2389
	2390
	2391	AVS-Fld </td>
	2392
	2393
	2394	<td style="vertical-align: top;">
	2395
	2396	<p>File
	2397	for the description of the coordinate information output
	2398	by the model into the local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
	2399	which is needed for the visualization of three-dimensional array data
	2400	by visualization-software AVS.  </p>
	2401
	2402
	2403
	2404	<p>This
	2405	file describes the structure of the file PLOT3D_COOR
	2406	(e.g. grid spacing, data type etc.) using the so-called AVS-Fld-format.
	2407	It also contains the name of the file (inclusive cycle number, but
	2408	without path) into which the local file PLOT3D_COOR (this is the file
	2409	name described in the file connection statement of the MRUN -
	2410	configuration file) is output in the permanent directory of the user
	2411	(possibly on remote computers). Under this name AVS expects the data
	2412	which are to be visualized. If there is no file connection statement
	2413	for
	2414	PLOT3D_COOR indicated in the configuration file, that file is
	2415	registered as "unknown" in the file
	2416	PLOT3D_FLD_COOR and the actual name
	2417	must be inserted later by hand.  </p>
	2418
	2419
	2420
	2421	<p>AVS
	2422	expects the information contained in the file
	2423	PLOT3D_FLD_COOR, as well as the remaining information about the
	2424	three-dimensional arrays output by the model (see <a href="#PLOT3D_FLD">PLOT3D_FLD</a>)
	2425	in one and the same file. This is satisfied by appending the file
	2426	PLOT3D_FLD_COOR after the end of a run are to the
	2427	file PLOT3D_FLD (e.g. with an appropriate OUTPUT-command in the
	2428	MRUN-configuration file: “cat PLOT3D_FLD_COOR
	2429	>>
	2430	PLOT3D_FLD”).  </p>
	2431
	2432
	2433
	2434	<p>For parallel
	2435	runs, PLOT3D_FLD_COOR is written by PE0 only.</p>
	2436
	2437
	2438	</td>
	2439
	2440
	2441	</tr>
	2442
	2443
	2444	<tr>
	2445
	2446
	2447	<td style="vertical-align: top; text-align: center;">
	2448
	2449	<p align="center">40  </p>
	2450
	2451
	2452
	2453	<p align="center">and/or  <br>
	2454
	2455
	2456	possibly  </p>
	2457
	2458
	2459
	2460	<p align="center">40-49</p>
	2461
	2462
	2463	</td>
	2464
	2465
	2466	<td style="vertical-align: top;">
	2467
	2468	<p><a name="PLOT1D_DATA"></a>PLOT1D_DATA<br>
	2469
	2470
	2471	(PLOT1D_DATA_O) </p>
	2472
	2473
	2474
	2475	<p>and/or  <br>
	2476
	2477
	2478	possibly  </p>
	2479
	2480
	2481	PLOT1D_DATA_0  <br>
	2482
	2483
	2484	PLOT1D_DATA_1<br>
	2485
	2486
	2487	...<br>
	2488
	2489
	2490	<br>
	2491
	2492
	2493	(PLOT1D_DATA<span style="font-weight: bold;">_O</span>_0 <br>
	2494
	2495
	2496	<font color="#000000">PLOT1D_DATA<span style="font-weight: bold;">_O</span>_1 <br>
	2497
	2498
	2499	</font><font color="#000000">...)<span style="font-weight: bold;"></span> </font></td>
	2500
	2501
	2502	<td style="vertical-align: top;">O </td>
	2503
	2504
	2505	<td style="vertical-align: top;">Ascii </td>
	2506
	2507
	2508	<td style="vertical-align: top;">
	2509
	2510	<p>This file contains
	2511	data (possibly horizontally and/or
	2512	temporally averaged) of the vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>)
	2513	written by the model in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2514	It is created only if <a href="chapter_4.2.html#data_output_format">data_output_format</a>
	2515	= <span style="font-style: italic;">'profil'</span>
	2516	is assigned. This file's format is suitable to be read by the plot
	2517	software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2518	Each data point of the profiles is output in one single line (1st
	2519	column: height in m, 2nd column: value of the respective quantity).
	2520	Within the file, data
	2521	of the individual profiles are located one behind the other. The order
	2522	of the data in the file follows the order used in the assignment for <b>data_output_pr</b>
	2523	(<b>data_output_pr</b> = <span style="font-style: italic;">'u'</span>, <span style="font-style: italic;">'v'</span>,…
	2524	means that the file starts with the data of the u-component profile,
	2525	followed by the v-component profile, etc.). </p>
	2526
	2527
	2528
	2529	<p><br>
	2530
	2531
	2532	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2533	using NAMELIST-parameter sets, which are saved by the
	2534	model into the local file <a href="#PLOT1D_PAR">PLOT1D_PAR</a>.
	2535	</p>
	2536
	2537
	2538
	2539	<p>The profile data written to the file are described
	2540	with the
	2541	run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.
	2542	Plots produced with these data using the parameter file PLOT1D_PAR do
	2543	not have to contain all these profiles. The profiles which can be drawn
	2544	in the plot are described with run parameter <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>.
	2545	By subsequent editing of the file PLOT1D_PAR all profiles can be
	2546	plotted (also the basic layout of the plots can be
	2547	changed). For orientation, each profile existing on the file
	2548	PLOT1D_DATA, starts with a comment line, which indicates the
	2549	presented variable and the output time. The text of these comment
	2550	lines is used as a legend in the plot. The very first line of the file
	2551	is a
	2552	comment line, containing information about the used model version, the
	2553	run identifier (base file name + number of the respective restart
	2554	run), the name of the executing computer, as well as the date and time
	2555	of the beginning of the run. At the end of this comment line is the
	2556	name
	2557	of the subdomain, to which the profiles belong (see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>).
	2558	By default, the profiles present averages of the total model domain. If
	2559	the model has to produce profiles for other subdomains beyond that, up
	2560	to 9 further files (units No. 41-49) are created, whereby the number of
	2561	the respective subdomain is attached
	2562	to the file name (e.g. PLOT1D_DATA_1). The name of the file with the
	2563	data of the total
	2564	domain in this case reads PLOT1D_DATA_0.  </p>
	2565
	2566
	2567
	2568	<p>For
	2569	presentation in the same plot, profile data of the restart
	2570	runs can be attached to existing data of preceding runs of a job chain.
	2571	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
	2572	in the file connection statement. The model produces a parameter file
	2573	(PLOT1D_PAR) for these combined data, if the run parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	2574	= <i>.T</i>. If this is omitted, then the parameter file
	2575	gives
	2576	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
	2577	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
	2578	must be specified together)!  </p>
	2579
	2580
	2581
	2582	<p>Further
	2583	information about output of
	2584	vertical profile data is given in the description of the run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.</p>
	2585
	2586
	2587	</td>
	2588
	2589
	2590	</tr>
	2591
	2592
	2593	<tr>
	2594
	2595
	2596	<td style="vertical-align: top; text-align: center;">80
	2597	</td>
	2598
	2599
	2600	<td style="vertical-align: top;"><a name="PARTICLE_INFOS"></a>PARTICLE_INFOS/<br>
	2601
	2602
	2603	(PARTICLE_INFOS<span style="font-weight: bold;">_O</span>/)
	2604	</td>
	2605
	2606
	2607	<td style="vertical-align: top;">O </td>
	2608
	2609
	2610	<td style="vertical-align: top;">Ascii </td>
	2611
	2612
	2613	<td style="vertical-align: top;">This
	2614	file is created in case of particle transport (see the <a href="chapter_4.2.html#particles_package">particles
	2615	package</a>). It contains statistical informations about the
	2616	number of
	2617	particles used and about the number of particles exchanged between each
	2618	single PE. These informations are output after every timestep if
	2619	switched on by parameter <a href="chapter_4.2.html#write_particle_statistics">write_particle_statistics</a>.
	2620	</td>
	2621
	2622
	2623	</tr>
	2624
	2625
	2626	<tr>
	2627
	2628
	2629	<td style="vertical-align: top; text-align: center;">81
	2630	</td>
	2631
	2632
	2633	<td style="vertical-align: top;"><a name="PLOTSP_X_PAR"></a>PLOTSP_X_PAR<br>
	2634
	2635
	2636	(PLOTSP_X_PAR_O)</td>
	2637
	2638
	2639	<td style="vertical-align: top;">O </td>
	2640
	2641
	2642	<td style="vertical-align: top;">Ascii/<br>
	2643
	2644
	2645	NAMELIST </td>
	2646
	2647
	2648	<td style="vertical-align: top;">This
	2649	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2650	package</a>). It contains the NAMELIST parameter set, with which
	2651	the
	2652	layout of a plot
	2653	of the data in the local file <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>
	2654	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
	2655
	2656
	2657
	2658	<p>It contains the so-called RAHMEN (frame)- and
	2659	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or
	2660	&CROSS</span>)
	2661	needed by <span style="font-weight: bold;">profil</span>.
	2662	The user can edit these parameter sets (and thus all details of the
	2663	plot layout) after the run.<br>
	2664
	2665
	2666	</p>
	2667
	2668
	2669
	2670	<p>By default,
	2671	for one quantity, all spectra at different heights
	2672	are plotted into a single panel. Different colors and line styles are
	2673	used for each height. Panels of up to four quantities are arranged on
	2674	one page in two lines (and two columns). More quantities are plotted on
	2675	additional page(s). If there is more than one output time (see <a href="chapter_4.2.html#dt_dosp">dt_dosp</a>),
	2676	additional pages will be plotted for each single output time. </p>
	2677
	2678
	2679	</td>
	2680
	2681
	2682	</tr>
	2683
	2684
	2685	<tr>
	2686
	2687
	2688	<td style="vertical-align: top; text-align: center;">82<br>
	2689
	2690
	2691	</td>
	2692
	2693
	2694	<td style="vertical-align: top;"><a name="PLOTSP_X_DATA"></a>PLOTSP_X_DATA<br>
	2695
	2696
	2697	(PLOTSP_X_DATA_O) </td>
	2698
	2699
	2700	<td style="vertical-align: top;">O<br>
	2701
	2702
	2703	</td>
	2704
	2705
	2706	<td style="vertical-align: top;">Ascii<br>
	2707
	2708
	2709	</td>
	2710
	2711
	2712	<td style="vertical-align: top;">This
	2713	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2714	package</a>). It contains the spectral data along x (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
	2715	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2716	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2717	using NAMELIST parameter sets, which are written by
	2718	the model to the local file <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
	2719
	2720
	2721	<br>
	2722
	2723
	2724	Regardless of the (sub)set of spectra specified by <a href="chapter_4.2.html#plot_spectra_level">plot_spectra_level</a>
	2725	for actual plotting, this file contains all data of spectra specified
	2726	by <a href="chapter_4.2.html#comp_spectra_level">comp_spectra_level</a>.<br>
	2727
	2728
	2729	<br>
	2730
	2731
	2732	<font>Each data point of a spectrum is output in a
	2733	single line
	2734	(1st column:
	2735	wavenumber, 2nd column: spectral coefficient). If spectra are to be
	2736	calculated and output for more than one height (see </font><font><a href="chapter_4.2.html#comp_spectra_level"><span lang="en-GB"><font face="Thorndale">comp_spectra_level</font></span></a></font><font>),
	2737	the spectral coefficients for the further heights can be found in the
	2738	subsequent columns. </font>The order
	2739	of the data in the file follows the order used in the assignment for <span style="font-style: italic;"></span><span style="font-style: italic;"></span><a href="chapter_4.2.html#data_output_sp">data_output_sp</a>.<br>
	2740
	2741
	2742	<br>
	2743
	2744
	2745	For orientation, a header of comment lines (one for each height level)
	2746	is placed in front of the spectral data of each quantity. They indicate
	2747	the respective quantity and the output time. The text of these comment
	2748	lines is used as a legend in the plot. </td>
	2749
	2750
	2751	</tr>
	2752
	2753
	2754	<tr>
	2755
	2756
	2757	<td style="vertical-align: top; text-align: center;">83<br>
	2758
	2759
	2760	</td>
	2761
	2762
	2763	<td style="vertical-align: top;"><a name="PLOTSP_Y_PAR"></a>PLOTSP_Y_PAR<br>
	2764
	2765
	2766	(PLOTSP_Y_PAR_O)</td>
	2767
	2768
	2769	<td style="vertical-align: top;">O<br>
	2770
	2771
	2772	</td>
	2773
	2774
	2775	<td style="vertical-align: top;">Ascii<br>
	2776
	2777
	2778	</td>
	2779
	2780
	2781	<td style="vertical-align: top;">This
	2782	file is created if spectra along y are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2783	package</a>). It contains the NAMELIST parameter set, with which
	2784	the
	2785	layout of a plot
	2786	of the data in the local file <a href="#PLOTSP_Y_DATA">PLOTSP_Y_DATA</a>
	2787	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
	2788
	2789
	2790	<br>
	2791
	2792
	2793	For more details see <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
	2794
	2795
	2796	</td>
	2797
	2798
	2799	</tr>
	2800
	2801
	2802	<tr>
	2803
	2804
	2805	<td style="vertical-align: top; text-align: center;">84<br>
	2806
	2807
	2808	</td>
	2809
	2810
	2811	<td style="vertical-align: top;"><a name="PLOTSP_Y_DATA"></a>PLOTSP_Y_DATA<br>
	2812
	2813
	2814	(PLOTSP_Y_DATA_O)</td>
	2815
	2816
	2817	<td style="vertical-align: top;">O<br>
	2818
	2819
	2820	</td>
	2821
	2822
	2823	<td style="vertical-align: top;">Ascii<br>
	2824
	2825
	2826	</td>
	2827
	2828
	2829	<td style="vertical-align: top;">This
	2830	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
	2831	package</a>). It contains the spectral data along y (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
	2832	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	2833	The data can only be visualized with <span style="font-weight: bold;">profil</span>
	2834	using NAMELIST parameter sets, which are written by
	2835	the model to the local file <a href="#PLOTSP_Y_PAR">PLOTSP_Y_PAR</a>.<br>
	2836
	2837
	2838	<br>
	2839
	2840
	2841	For more details see <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>.</td>
	2842
	2843
	2844	</tr>
	2845
	2846
	2847	<tr>
	2848
	2849
	2850	<td style="vertical-align: top; text-align: center;">85<br>
	2851
	2852
	2853	</td>
	2854
	2855
	2856	<td style="vertical-align: top;"><a name="PARTICLE_DATA"></a>PARTICLE_DATA/<br>
	2857
	2858
	2859	(PARTICLE_DATA<span style="font-weight: bold;">_O</span>/)</td>
	2860
	2861
	2862	<td style="vertical-align: top;">O<br>
	2863
	2864
	2865	</td>
	2866
	2867
	2868	<td style="vertical-align: top;">Binary<br>
	2869
	2870
	2871	</td>
	2872
	2873
	2874	<td style="vertical-align: top;">This
	2875	file is created if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	2876	package</a>) and contains all particle data for one or several
	2877	output
	2878	times (see <a href="chapter_4.2.html#dt_write_particle_data">dt_write_particle_data</a>).<br>
	2879
	2880
	2881	<br>
	2882
	2883
	2884	The first record of this file contains an identification string (PALM
	2885	version number, run identifier, etc., 80 characters long). The second
	2886	record also contains a version string (80 characters long) followed by
	2887	two records with particle group informations (see file <span style="font-family: monospace;">check_open.f90</span>).
	2888	Then, for each
	2889	output time, two records follow, where the first one gives some general
	2890	information (numbers of particles, etc.) and the second one contains
	2891	the actual particle data. A FORTRAN TYPE structure is used for storing
	2892	the particle attributes. See file <span style="font-family: monospace;">advec_particles.f90</span>
	2893	for the detailed format.</td>
	2894
	2895
	2896	</tr>
	2897
	2898
	2899	<tr>
	2900
	2901
	2902	<td style="vertical-align: top; text-align: center;">90</td>
	2903
	2904
	2905	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
	2906
	2907
	2908	DATA_IN/</td>
	2909
	2910
	2911	<td style="vertical-align: top;">I<br>
	2912
	2913
	2914	</td>
	2915
	2916
	2917	<td style="vertical-align: top;">Binary<br>
	2918
	2919
	2920	</td>
	2921
	2922
	2923	<td style="vertical-align: top;">Binary
	2924	data, which are read in by the model at the beginning
	2925	of a restart run (see <a href="chapter_3.3.html">chapter
	2926	3.3</a>). The appropriate file must have been written by the
	2927	preceding
	2928	job of the job chain (see <a href="#PARTICLE_RESTART_DATA_OUT">PARTICLE_RESTART_DATA_OUT</a>).
	2929	This file is needed if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	2930	package</a>) and contains all particle informations (particle
	2931	positions, velocities, etc.) from the end of the preceding run.
	2932	Concerning runs on
	2933	several processors it has to be noted that each processing element
	2934	reads its own file and that the file content is processor-dependent.
	2935	The
	2936	number of processors which can be used must not be changed during a job
	2937	chain and/or if a job chain is continued. <br>
	2938
	2939
	2940	<br>
	2941
	2942
	2943	The first record of this file contains a version number (four character
	2944	string) of the subroutine, which output the data that follows (<span style="font-family: monospace;">write_particles</span>,
	2945	see end of
	2946	file <span style="font-family: monospace;">advec_particles.f90</span>).
	2947	This number has to
	2948	agree with the version number of the subroutine which is reading the
	2949	file
	2950	(<span style="font-family: monospace;">init_parrticles.f90</span>)
	2951	in
	2952	case of a restart run. Otherwise the model run
	2953	is aborted. Version numbers are changed whenever new code revisions
	2954	require a change of the file format. Some general informations like the
	2955	number of particles stored in the file, the number of particle groups,
	2956	etc.. are stored in the second record. The third record includes the
	2957	particles to be released at the source and the fourth record contains
	2958	all current particles. In case that particle tails are used (see <a href="chapter_4.2.html#maximum_number_of_tailpoints">maximum_number_of_tailpoints</a>),
	2959	a further record may follow, which contains the particle tail
	2960	informations. A FORTRAN TYPE structure is used for storing the particle
	2961	attributes. For detailed informations about the file format see the
	2962	corresponding READ statements in file <span style="font-family: monospace;">init_particles.f90</span>
	2963	.<br>
	2964
	2965
	2966	</td>
	2967
	2968
	2969	</tr>
	2970
	2971
	2972	<tr>
	2973
	2974
	2975	<td style="vertical-align: top; text-align: center;">90<br>
	2976
	2977
	2978	</td>
	2979
	2980
	2981	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
	2982
	2983
	2984	DATA_OUT/</td>
	2985
	2986
	2987	<td style="vertical-align: top;">O<br>
	2988
	2989
	2990	</td>
	2991
	2992
	2993	<td style="vertical-align: top;">Binary<br>
	2994
	2995
	2996	</td>
	2997
	2998
	2999	<td style="vertical-align: top;">Binary
	3000	data, which are output at the end of the
	3001	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
	3002	3.3</a>) for the initialization. This output file is then read as
	3003	file <a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.
	3004	The file is only written if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
	3005	package</a>). For a more detailed description of the file
	3006	structure see <a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.</td>
	3007
	3008
	3009	</tr>
	3010
	3011
	3012	<tr>
	3013
	3014
	3015	<td style="vertical-align: top; text-align: center;">90<br>
	3016
	3017
	3018	</td>
	3019
	3020
	3021	<td style="vertical-align: top;">
	3022
	3023	<p><a name="PLOT1D_PAR"></a>PLOT1D_PAR<br>
	3024
	3025
	3026	(PLOT1D_PAR_O) </p>
	3027
	3028
	3029
	3030	<p>and/or  <br>
	3031
	3032
	3033	possibly  </p>
	3034
	3035
	3036
	3037	<p>PLOT1D_PAR_0  <br>
	3038
	3039
	3040	PLOT1D_PAR_1  <br>
	3041
	3042
	3043
	3044	.  <br>
	3045
	3046
	3047
	3048	.  <br>
	3049
	3050
	3051
	3052	.  <br>
	3053
	3054
	3055	PLOT1D_PAR_9</p>
	3056
	3057
	3058
	3059	<p></p>
	3060
	3061
	3062
	3063	<p>(PLOT1D_PAR<span style="font-weight: bold;">_O</span>_0
	3064	<br>
	3065
	3066
	3067	PLOT1D_PAR<font color="#000000"><span style="font-weight: bold;">_O</span></font>_1
	3068	<br>
	3069
	3070
	3071
	3072	.  <br>
	3073
	3074
	3075
	3076	.  <br>
	3077
	3078
	3079
	3080	.  <br>
	3081
	3082
	3083	PLOT1D_PAR<font color="#000000"><span style="font-weight: bold;">_O</span></font>_9)</p>
	3084
	3085
	3086	</td>
	3087
	3088
	3089	<td style="vertical-align: top;">O<br>
	3090
	3091
	3092	</td>
	3093
	3094
	3095	<td style="vertical-align: top;">Ascii/
	3096	NAMELIST<br>
	3097
	3098
	3099	</td>
	3100
	3101
	3102	<td style="vertical-align: top;">
	3103
	3104	<p>NAMELIST parameter set, with which the layout of a plot
	3105	of the data in the local file <a href="#PLOT1D_DATA">PLOT1D_DATA</a>
	3106	can be steered, if these data are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
	3107	</p>
	3108
	3109
	3110
	3111	<p>This file contains the so-called RAHMEN (frame)-
	3112	and
	3113	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or
	3114	&CROSS</span>)
	3115	needed by <span style="font-weight: bold;">profil</span>.
	3116	These parameter sets (and thus all details of the plot layout) can be
	3117	edited after the model run by the user. By default, all profiles of one
	3118	variable saved at different times are drawn into one panel. Different
	3119	colors are used for each output time. Which profiles are drawn
	3120	into which plane and how these planes are arranged on the
	3121	plot, is determined with the parameters <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>,
	3122	<a href="chapter_4.2.html#profile_columns">profile_columns</a>
	3123	and <a href="chapter_4.2.html#profile_rows">profile_rows</a>.
	3124	</p>
	3125
	3126
	3127
	3128	<p>The file PLOT1D_PAR is created by the model
	3129	briefly before
	3130	the end of a run. If a model run crashes uncontrolled (run time
	3131	errors or CPU - time exceeded), this file is usually missing, although
	3132	profile data were saved to the file PLOT1D_DATA.  </p>
	3133
	3134
	3135
	3136	<p>If
	3137	the model has to create profiles for different subdomains
	3138	(see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>),
	3139	further files are created, whereby the file name includes the number of
	3140	the respective subdomain (e.g. PLOT1D_PAR_1). In this case the name of
	3141	the file with NAMELIST parameters of the total domain is
	3142	PLOT1D_PAR_0.  </p>
	3143
	3144
	3145
	3146	<p>For presentation in the
	3147	same plot, profile data of the restart
	3148	runs can be appended to existing data of preceding runs of a job chain.
	3149	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
	3150	in the file connection statement for PLOT1D_DATA. The model produces
	3151	a parameter file PLOT1D_PAR for these combined data, if the run
	3152	parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
	3153	= <i>.T</i>. If this is omitted, then the parameter file
	3154	gives
	3155	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
	3156	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
	3157	must be specified together)!</p>
	3158
	3159
	3160	</td>
	3161
	3162
	3163	</tr>
	3164
	3165
	3166	<tr>
	3167
	3168
	3169	<td style="vertical-align: top; text-align: center;">90<br>
	3170
	3171
	3172	</td>
	3173
	3174
	3175	<td style="vertical-align: top;"><a name="PLOT2D_XY_GLOBAL"></a>PLOT2D_XY_GLOBAL<br>
	3176
	3177
	3178	(PLOT2D_XY_GLOBAL_O)</td>
	3179
	3180
	3181	<td style="vertical-align: top;">O<br>
	3182
	3183
	3184	</td>
	3185
	3186
	3187	<td style="vertical-align: top;">Ascii/  <br>
	3188
	3189
	3190	NAMELIST</td>
	3191
	3192
	3193	<td style="vertical-align: top;">
	3194
	3195	<p>NAMELIST
	3196	parameter set, with which the plot layout
	3197	of the data in local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
	3198	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3199	This file contains the so-called global parameter set (NAMELIST - group
	3200	name: &GLOBAL) needed by <span style="font-weight: bold;">iso2d</span>.
	3201	This parameter set can be edited
	3202	after the model run by the user. By default, the arrays are drawn using
	3203	isolines and each array
	3204	will be drawn onto a separate page (thus no color shading
	3205	presentation, no vector arrows, streamlines etc.).  </p>
	3206
	3207
	3208
	3209	<p>Additionally <span style="font-weight: bold;">iso2d</span>
	3210	needs the so-called local parameter
	3211	sets. These are saved by the model to the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.
	3212	Due to the fact that <span style="font-weight: bold;">iso2d</span>
	3213	expects global and local parameter sets on one and the same
	3214	file, in fact the global parameter set first, the user has to append
	3215	the contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
	3216	before call of <span style="font-weight: bold;">iso2d</span>
	3217	(e.g. by
	3218	an OUTPUT - command in the MRUN -
	3219	configuration file: “cat PLOT2D_XY_LOCAL >>
	3220	PLOT2D_XY_GLOBAL”).
	3221	This
	3222	relatively pedantic proceedure is due to the fact that the model can
	3223	create the file PLOT2D_XY_GLOBAL only at the end of the simulation
	3224	(only then, when the final value of the global <span style="font-weight: bold;">iso2d</span>-parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
	3225	is known), while the local parameter sets are written continuously
	3226	to the file PLOT2D_XY_LOCAL during the run. Since the file
	3227	PLOT2D_XY_GLOBAL needs to be addressed only briefly once, output-unit
	3228	90 is used, which is also used for other files.</p>
	3229
	3230
	3231	</td>
	3232
	3233
	3234	</tr>
	3235
	3236
	3237	<tr>
	3238
	3239
	3240	<td style="vertical-align: top; text-align: center;">90<br>
	3241
	3242
	3243	</td>
	3244
	3245
	3246	<td style="vertical-align: top;"><a name="PLOT2D_XZ_GLOBAL"></a>PLOT2D_XZ_GLOBAL<br>
	3247
	3248
	3249	(PLOT2D_XZ_GLOBAL_O)</td>
	3250
	3251
	3252	<td style="vertical-align: top;">O<br>
	3253
	3254
	3255	</td>
	3256
	3257
	3258	<td style="vertical-align: top;">Ascii/  <br>
	3259
	3260
	3261	NAMELIST</td>
	3262
	3263
	3264	<td style="vertical-align: top;">
	3265
	3266	<p>NAMELIST
	3267	parameter set, with which the plot layout of the data
	3268	in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
	3269	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3270	</p>
	3271
	3272
	3273
	3274	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	3275	applies to this file, respectively.</p>
	3276
	3277
	3278	</td>
	3279
	3280
	3281	</tr>
	3282
	3283
	3284	<tr>
	3285
	3286
	3287	<td style="vertical-align: top; text-align: center;">90<br>
	3288
	3289
	3290	</td>
	3291
	3292
	3293	<td style="vertical-align: top;"><a name="PLOT2D_YZ_GLOBAL"></a>PLOT2D_YZ_GLOBAL<br>
	3294
	3295
	3296	(PLOT2D_YZ_GLOBAL_O)</td>
	3297
	3298
	3299	<td style="vertical-align: top;">O<br>
	3300
	3301
	3302	</td>
	3303
	3304
	3305	<td style="vertical-align: top;">Ascii/  <br>
	3306
	3307
	3308	NAMELIST</td>
	3309
	3310
	3311	<td style="vertical-align: top;">
	3312
	3313	<p>NAMELIST
	3314	parameter set, with which the plot layout of the data
	3315	in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
	3316	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
	3317	</p>
	3318
	3319
	3320
	3321	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
	3322	applies to this file, respectively.</p>
	3323
	3324
	3325	</td>
	3326
	3327
	3328	</tr>
	3329
	3330
	3331	<tr>
	3332
	3333
	3334	<td style="vertical-align: top; text-align: center;">90</td>
	3335
	3336
	3337	<td style="vertical-align: top;"><a name="TOPOGRAPHY_DATA"></a>TOPOGRAPHY_DATA</td>
	3338
	3339
	3340	<td style="vertical-align: top;">I</td>
	3341
	3342
	3343	<td style="vertical-align: top;">Ascii</td>
	3344
	3345
	3346	<td>Two-dimensional <font color="#000000">topography
	3347	height information</font>
	3348	in m.<br>
	3349
	3350
	3351	In case of  <a href="chapter_4.1.html#topography">topography</a>
	3352	= <span style="font-style: italic;">'read_from_file'</span>
	3353	the subroutine <span style="font-family: Cumberland AMT;">init_grid</span> reads
	3354	the topography height information in m for each grid point in
	3355	a free floating point format. The data on file are laid out naturally,
	3356	i.e. in W-E orientation horizontally and in S-N orientation vertically,
	3357	they must thus be organized as follows:<br>
	3358
	3359
	3360
	3361	<ul>
	3362
	3363
	3364	<li>each
	3365	line contains height information in m from <span style="font-style: italic;">i = 0, ..., nx</span>,</li>
	3366
	3367
	3368	<li>the top line contains height information in m for <span style="font-style: italic;">j = ny</span> (North), the
	3369	bottom line for <span style="font-style: italic;">j = 0</span>
	3370	(South),</li>
	3371
	3372
	3373	<li>individual data must be separated by at
	3374	least one blank.</li>
	3375
	3376
	3377
	3378	</ul>
	3379
	3380
	3381	Layout sketch:<br>
	3382
	3383
	3384	<span style="font-family: Cumberland AMT;">
	3385
	3386	N<br>
	3387
	3388
	3389	(0,ny)   </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny)
	3390	</span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny)
	3391	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny)
	3392	<span style="font-family: Times New Roman,Times,serif;"></span></span></font><font color="#000000"> top of file</font><font color="#000000"><span style="font-family: Cumberland AMT;"><span style="font-family: Times New Roman,Times,serif;"></span></span></font><br>
	3393
	3394
	3395	<font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3396	(0,ny-1) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-1) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-1)
	3397	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-1)  <br>
	3398
	3399
	3400	</span></font></font><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">W
	3401	(0,ny-2) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-2) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-2)
	3402	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-2)   E<br>
	3403
	3404
	3405	</span></font></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3406
	3407	:<br>
	3408
	3409
	3410
	3411
	3412	:<br>
	3413
	3414
	3415	</span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">
	3416
	3417	(0,0)    </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,0)
	3418	</span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,0)
	3419	... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,0)
	3420	</span></font></font></font><font color="#000000"> bottom of file</font><br>
	3421
	3422
	3423	<font color="#000000"><span style="font-family: Cumberland AMT;">
	3424
	3425	S</span></font><br>
	3426
	3427
	3428	<span style="font-family: Arial;"></span><br>
	3429
	3430
	3431	These data must exactly match the horizontal grid.<br>
	3432
	3433
	3434	Alternatively, the user may add code to the user interface subroutine <a href="chapter_3.5.1.html#user_init_grid">user_init_grid</a>
	3435	to allow different data formats.</td>
	3436
	3437
	3438	<td><br>
	3439
	3440
	3441	</td>
	3442
	3443
	3444	</tr>
	3445
	3446
	3447	<tr>
	3448
	3449
	3450	<td style="vertical-align: top; text-align: center;"><font color="#000000">101</font></td>
	3451
	3452
	3453	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XY_NETCDF"></a>DATA_2D_XY_NETCDF<br>
	3454
	3455
	3456	(DATA_2D_XY_NETCDF_O)</font></td>
	3457
	3458
	3459	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3460
	3461
	3462	<td style="vertical-align: top;"><font color="#000000">Binary/<br>
	3463
	3464
	3465	NetCDF-<br>
	3466
	3467
	3468	format</font></td>
	3469
	3470
	3471	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">This file
	3472	contains data of the two-dimensional horizontal
	3473	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3474	in NetCDF format. The data in this file can be visualized by any
	3475	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3476
	3477
	3478	<br>
	3479
	3480
	3481	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></td>
	3482
	3483
	3484	<td style="vertical-align: top;"><br>
	3485
	3486
	3487	</td>
	3488
	3489
	3490	</tr>
	3491
	3492
	3493	<tr>
	3494
	3495
	3496	<td style="vertical-align: top; text-align: center;"><font color="#000000">102</font></td>
	3497
	3498
	3499	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XZ_NETCDF"></a>DATA_2D_XZ_NETCDF<br>
	3500
	3501
	3502	(DATA_2D_XZ_NETCDF_O)</font></td>
	3503
	3504
	3505	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3506
	3507
	3508	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3509
	3510
	3511	NetCDF-<br>
	3512
	3513
	3514	format</font></font></td>
	3515
	3516
	3517	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3518	contains data of the two-dimensional vertical (xz)
	3519	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3520	in NetCDF format. The data in this file can be visualized by any
	3521	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3522
	3523
	3524	<br>
	3525
	3526
	3527	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3528
	3529
	3530	<td style="vertical-align: top;"><br>
	3531
	3532
	3533	</td>
	3534
	3535
	3536	</tr>
	3537
	3538
	3539	<tr>
	3540
	3541
	3542	<td style="vertical-align: top; text-align: center;"><font color="#000000">103</font></td>
	3543
	3544
	3545	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_NETCDF"></a>DATA_2D_YZ_NETCDF<br>
	3546
	3547
	3548	(DATA_2D_YZ_NETCDF_O)</font></td>
	3549
	3550
	3551	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3552
	3553
	3554	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3555
	3556
	3557	NetCDF-<br>
	3558
	3559
	3560	format</font></font></td>
	3561
	3562
	3563	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3564	contains data of the two-dimensional vertical
	3565	(yz) cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3566	in NetCDF format. The data in this file can be visualized by any
	3567	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3568
	3569
	3570	<br>
	3571
	3572
	3573	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3574
	3575
	3576	<td style="vertical-align: top;"><br>
	3577
	3578
	3579	</td>
	3580
	3581
	3582	</tr>
	3583
	3584
	3585	<tr>
	3586
	3587
	3588	<td style="vertical-align: top; text-align: center;"><font color="#000000">104</font></td>
	3589
	3590
	3591	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_PR_NETCDF"></a>DATA_1D_PR_NETCDF<br>
	3592
	3593
	3594	(DATA_1D_PR_NETCFD_O)</font></td>
	3595
	3596
	3597	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3598
	3599
	3600	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3601
	3602
	3603	NetCDF-<br>
	3604
	3605
	3606	format</font></font></td>
	3607
	3608
	3609	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3610	contains data of the horizontally averaged vertical profiles (see <a href="../app/chapter_4.2.html#data_output_pr">data_output_pr</a>)
	3611	in NetCDF format. The data in this file can be visualized by any
	3612	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3613
	3614
	3615	<br>
	3616
	3617
	3618	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3619
	3620
	3621	<td style="vertical-align: top;"><br>
	3622
	3623
	3624	</td>
	3625
	3626
	3627	</tr>
	3628
	3629
	3630	<tr>
	3631
	3632
	3633	<td style="vertical-align: top; text-align: center;"><font color="#000000">105</font></td>
	3634
	3635
	3636	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_TS_NETCDF"></a>DATA_1D_TS_NETCDF<br>
	3637
	3638
	3639	(DATA_1D_TS_NETCDF_O)</font></td>
	3640
	3641
	3642	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3643
	3644
	3645	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3646
	3647
	3648	NetCDF-<br>
	3649
	3650
	3651	format</font></font></td>
	3652
	3653
	3654	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3655	contains data of the timeseries (see <a href="chapter_4.2.html#dt_dots">dt_dots</a>)
	3656	in NetCDF format. The data in this file can be visualized by any
	3657	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3658
	3659
	3660	<br>
	3661
	3662
	3663	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3664
	3665
	3666	<td style="vertical-align: top;"><br>
	3667
	3668
	3669	</td>
	3670
	3671
	3672	</tr>
	3673
	3674
	3675	<tr>
	3676
	3677
	3678	<td style="vertical-align: top; text-align: center;"><font color="#000000">106</font></td>
	3679
	3680
	3681	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_NETCDF"></a>DATA_3D_NETCDF<br>
	3682
	3683
	3684	(DATA_3D_NETCDF_O)</font></td>
	3685
	3686
	3687	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3688
	3689
	3690	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3691
	3692
	3693	NetCDF-<br>
	3694
	3695
	3696	format</font></font></td>
	3697
	3698
	3699	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3700	contains data of the 3d-volume data (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
	3701	in NetCDF format. The data in this file can be visualized by any
	3702	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3703
	3704
	3705	<br>
	3706
	3707
	3708	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3709
	3710
	3711	<td style="vertical-align: top;"><br>
	3712
	3713
	3714	</td>
	3715
	3716
	3717	</tr>
	3718
	3719
	3720	<tr>
	3721
	3722
	3723	<td style="vertical-align: top; text-align: center;"><font color="#000000">107</font></td>
	3724
	3725
	3726	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_SP_NETCDF"></a>DATA_1D_SP_NETCDF<br>
	3727
	3728
	3729	(DATA_1D_SP_NETCDF_O)</font></td>
	3730
	3731
	3732	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3733
	3734
	3735	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3736
	3737
	3738	NetCDF-<br>
	3739
	3740
	3741	format</font></font></td>
	3742
	3743
	3744	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3745	contains data of the horizontal spectra (see <a href="../app/chapter_4.2.html#data_output_sp">data_output_sp</a>)
	3746	in NetCDF format. The data in this file can be visualized by any
	3747	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3748
	3749
	3750	<br>
	3751
	3752
	3753	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3754
	3755
	3756	<td style="vertical-align: top;"><br>
	3757
	3758
	3759	</td>
	3760
	3761
	3762	</tr>
	3763
	3764
	3765	<tr>
	3766
	3767
	3768	<td style="vertical-align: top; text-align: center;"><font color="#000000">108</font></td>
	3769
	3770
	3771	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_PRT_NETCDF"></a>DATA_PRT_NETCDF/<br>
	3772
	3773
	3774	(DATA_PRT_NETCDF<span style="font-weight: bold;">_O</span>/)</font></td>
	3775
	3776
	3777	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
	3778
	3779
	3780	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
	3781
	3782
	3783	NetCDF-<br>
	3784
	3785
	3786	format</font></font></td>
	3787
	3788
	3789	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3790	contains particle data (see <a href="../app/chapter_4.2.html#dt_prel">dt_prel</a>)
	3791	in NetCDF format. The data in this file can be visualized by any
	3792	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3793
	3794
	3795	<br>
	3796
	3797
	3798	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3799
	3800
	3801	<td style="vertical-align: top;"><br>
	3802
	3803
	3804	</td>
	3805
	3806
	3807	</tr>
	3808
	3809
	3810	<tr>
	3811
	3812
	3813	<td style="vertical-align: top; text-align: center;">109</td>
	3814
	3815
	3816	<td align="left" valign="top"><a name="DATA_1D_PTS_NETCDF"></a>DATA_1D_PTS_NETCDF<br>
	3817
	3818
	3819	(DATA_1D_PTS_NETCDF_O)</td>
	3820
	3821
	3822	<td align="left" valign="top">I/O</td>
	3823
	3824
	3825	<td align="left" valign="top">Binary/<br>
	3826
	3827
	3828	NetCDF-<br>
	3829
	3830
	3831	format</td>
	3832
	3833
	3834	<td align="left" valign="top">This
	3835	file contains data of the timeseries of particle quantities (<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">see <a href="chapter_4.2.html#dt_prel">dt_prel</a>)
	3836	in NetCDF format. </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">The data
	3837	in this file can be visualized by any graphic software which provides a
	3838	NetCDF interface (e.g. <span style="font-weight: bold;">NCL
	3839	</span>or<span style="font-weight: bold;">
	3840	ferret</span>).
	3841	For a list of available output quantities see </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"> <a href="chapter_4.2.html#dt_dopts">dt_dopts</a>.</font></font></font></font></font><br>
	3842
	3843
	3844	<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><br>
	3845
	3846
	3847	</font></font></font></font><span lang="en-GB"><font face="Thorndale">In case of
	3848	using more than one particle group (see <a href="chapter_4.2.html#number_of_particle_groups">number_of_particle_groups</a>),
	3849	seperate time series are output for each of the groups. The long names
	3850	of the variables in the NetCDF file containing the respective
	3851	timeseries all end with the string</font><span style="font-style: italic; font-family: monospace;">' PG ##'</span><font face="Thorndale">, where ## is the number of the particle
	3852	group (<span style="font-style: italic;">01</span>, <span style="font-style: italic;">02</span>, etc.). <br>
	3853
	3854
	3855	<br>
	3856
	3857
	3858	</font></span><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">More detailed informations about the
	3859	PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter
	3860	4.5.1</a>.</font></font></font></font></td>
	3861
	3862
	3863	<td align="left" valign="top"></td>
	3864
	3865
	3866	</tr>
	3867
	3868
	3869	<tr>
	3870
	3871
	3872	<td style="text-align: center; vertical-align: top;">111</td>
	3873
	3874
	3875	<td style="vertical-align: top;"><a name="DATA_2D_XY_AV_NETCDF"></a>DATA_2D_XY_AV_NETCDF<br>
	3876
	3877
	3878	(DATA_2D_XY_AV_NETCDF_O)</td>
	3879
	3880
	3881	<td style="vertical-align: top;">I/O</td>
	3882
	3883
	3884	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3885
	3886
	3887	NetCDF-<br>
	3888
	3889
	3890	format</font></font></font></td>
	3891
	3892
	3893	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3894	contains data of the temporally averaged two-dimensional horizontal
	3895	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3896	in NetCDF format. The data in this file can be visualized by any
	3897	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3898
	3899
	3900	<br>
	3901
	3902
	3903	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
	3904
	3905
	3906	<td></td>
	3907
	3908
	3909	</tr>
	3910
	3911
	3912	<tr>
	3913
	3914
	3915	<td style="text-align: center; vertical-align: top;">112</td>
	3916
	3917
	3918	<td style="vertical-align: top;"><a name="DATA_2D_XZ_AV_NETCDF"></a>DATA_2D_XZ_AV_NETCDF<br>
	3919
	3920
	3921	(DATA_2D_XZ_AV_NETCDF_O)</td>
	3922
	3923
	3924	<td style="vertical-align: top;">I/O</td>
	3925
	3926
	3927	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3928
	3929
	3930	NetCDF-<br>
	3931
	3932
	3933	format</font></font></font></td>
	3934
	3935
	3936	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3937	contains data of the temporally
	3938	averaged two-dimensional vertical (xz)
	3939	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3940	in NetCDF format. The data in this file can be visualized by any
	3941	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3942
	3943
	3944	<br>
	3945
	3946
	3947	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	3948
	3949
	3950	<td></td>
	3951
	3952
	3953	</tr>
	3954
	3955
	3956	<tr>
	3957
	3958
	3959	<td style="text-align: center; vertical-align: top;">113</td>
	3960
	3961
	3962	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_AV_NETCDF"></a>DATA_2D_YZ_AV_NETCDF<br>
	3963
	3964
	3965	(DATA_2D_YZ_AV_NETCDF_O)</font></td>
	3966
	3967
	3968	<td style="vertical-align: top;">I/O</td>
	3969
	3970
	3971	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	3972
	3973
	3974	NetCDF-<br>
	3975
	3976
	3977	format</font></font></font></td>
	3978
	3979
	3980	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	3981	contains data of the temporally
	3982	averaged two-dimensional vertical
	3983	(yz) cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
	3984	in NetCDF format. The data in this file can be visualized by any
	3985	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	3986
	3987
	3988	<br>
	3989
	3990
	3991	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	3992
	3993
	3994	<td></td>
	3995
	3996
	3997	</tr>
	3998
	3999
	4000	<tr>
	4001
	4002
	4003	<td style="text-align: center; vertical-align: top;">116</td>
	4004
	4005
	4006	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_AV_NETCDF"></a>DATA_3D_AV_NETCDF<br>
	4007
	4008
	4009	(DATA_3D_AV_NETCDF_O)</font></td>
	4010
	4011
	4012	<td style="vertical-align: top;">I/O</td>
	4013
	4014
	4015	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
	4016
	4017
	4018	NetCDF-<br>
	4019
	4020
	4021	format</font></font></font></td>
	4022
	4023
	4024	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file
	4025	contains data of the temporally
	4026	averaged 3d-volume data (see <a href="chapter_4.2.html#data_output">data_output</a>)
	4027	in NetCDF format. The data in this file can be visualized by any
	4028	graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
	4029
	4030
	4031	<br>
	4032
	4033
	4034	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
	4035
	4036
	4037	<td></td>
	4038
	4039
	4040	</tr>
	4041
	4042
	4043
	4044	</tbody>
	4045	</table>
	4046
	4047
	4048	<font color="#000000"><br>
	4049
	4050
	4051	</font><br>
	4052
	4053
	4054	<font color="#000080"><font color="#000080"><a href="chapter_3.3.html"><font color="#000080"><img src="left.gif" name="Grafik1" align="bottom" border="2" height="32" width="32"></font></a><a href="index.html"><font color="#000080"><img src="up.gif" name="Grafik2" align="bottom" border="2" height="32" width="32"></font></a><a href="chapter_3.5.html"><font color="#000080"><img src="right.gif" name="Grafik3" align="bottom" border="2" height="32" width="32"></font></a></font></font><br>
	4055
	4056
	4057
	4058	<br>
	4059
	4060
	4061
	4062	<span style="font-style: italic;">Last change:</span>
	4063	$Id: chapter_3.4.html 108 2007-08-24 15:10:38Z letzel $<br>
	4064
	4065
	4066	</font><br>
	4067
	4068
	4069	</body>
	4070	</html>

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |