Changes between Version 12 and Version 13 of doc/app/virtual_measurement_parameters

Timestamp:

Feb 13, 2020 7:02:31 PM (5 years ago)

Author:

suehring

Comment:

--

doc/app/virtual_measurement_parameters

@@ -9 +9 @@
 
 In order to setup the measurement locations, a measurement setup file is required. This file contains all information about the measurement coordinates, the measured variables, the type of the measurement (timeseries- profile-, or trajectory measurements), as well as further attributes such as site names, etc.. For a description of required attributes and variables, as well as an example input file, please see [../iofiles/pids#virtual_measurement_input here]. 
-Since revision -r4400 PALM comes with a preprocessor script [source:palm/trunk/SCRIPTS/palm_cvd palm_cvd], which is a python3 script and setup the input file according to your prescribed observation locations.     
+Since revision -r4400 PALM comes with a pre-processor script [source:palm/trunk/SCRIPTS/palm_cvd palm_cvd], which is a python3 script and setup the input file according to your prescribed observation locations.     
+Please note, all sampled variables are defined at the grid center. The following list gives an overview about the quantities that can be sampled (naming convention follows the (UC)2 standard):
 
-
+||='''Quantity name''' =||='''Meaning''' =||='''Unit''' =||
+|| theta  ||potential temperature||K ||
+|| thetas  ||scaling parameter for temperature in surface layer||K ||
+|| ta  ||air temperature||degree C ||
+|| hus  ||specific humidity||kg/kg ||
+|| haa  ||absolute atmospheric humidity||kg/m3 ||
+|| haa  ||relative humidity||- ||
+|| pwv  ||water vapor partial pressure||hPa ||
+|| ssdu  ||duration of sunshine||s ||
+|| t_lw  ||water temperature||degree C ||
+|| mcpm1  ||PM1 concentration||kg/m3 ||
+|| mcpm10  ||PM10 concentration||kg/m3 ||
+|| mcpm2p5  ||PM2.5 concentration||kg/m3 ||
+|| mcno  ||NO concentration||ppm ||
+|| mcno2  ||NO2 concentration||ppm ||
+|| tro3  ||O3 concentration||ppm ||
+|| ps  ||surface pressure||hPa ||
+|| lwp  ||liquid water path||kg/m2 ||
+|| hfdg  ||ground heatflux into soil ||W/m2 ||
+|| hfls  ||surface latent heat flux ||W/m2 ||
+|| hfss  ||surface sensible heat flux ||W/m2 ||
+|| rsds  ||surface radiation flux (shortwave down) ||W/m2 ||
+|| rsus  ||surface radiation flux (shortwave up) ||W/m2 ||
+|| rsd  ||radiation flux (shortwave down) ||W/m2 ||
+|| rsddif  ||radiation flux (diffuse shortwave down) ||W/m2 ||
+|| rsu  ||radiation flux (shortwave up) ||W/m2 ||
+|| rnds  ||surface net radiation flux ||W/m2 ||
+|| rld  ||radiation flux (longwave down) ||W/m2 ||
+|| rlu  ||radiation flux (longwave up) ||W/m2 ||
+|| rlus  ||surface radiation flux (longwave up) ||W/m2 ||
+|| t_soil  ||soil temperature ||degree C ||
+|| m_soil  ||soil moisture ||m3/m3 ||
+|| uv ||total horizontal momentum-flux ||m2/s2 ||
+|| vw ||total vertical momentum flux of v-component ||m2/s2 ||
+|| uw ||total vertical momentum flux of u-component ||m2/s2 ||
+|| us ||friction velocity ||m/s ||
+|| u  ||u-component||m/s ||
+|| v  ||v-component||m/s ||
+|| w  ||w-component||m/s ||
+|| wspeed  ||horizontal wind speed||m/s ||
+|| wdir  ||wind direction||degree ||
+|| utheta  ||total flux of potential temperature in x-direction||Km/s ||
+|| vtheta  ||total flux of potential temperature in y-direction||Km/s ||
+|| wtheta  ||total flux of potential temperature in z-direction||Km/s ||
+|| uqv  ||total flux of humidity in x-direction||kg m/(kg s) ||
+|| vqv  ||total flux of humidity in y-direction||kg m/(kg s) ||
+|| wqv  ||total flux of humidity in z-direction||kg m/(kg s) ||
 \\