Changes between Version 66 and Version 67 of doc/app/iofiles/pids

Timestamp:

Jun 1, 2018 2:24:57 PM (7 years ago)

Author:

kanani

Comment:

--

doc/app/iofiles/pids

@@ -112 +112 @@
 
 In order to prescribe topography from the static input file, [../../inipar#topography topography] = 'read_from_file' is required. 
-The minimum requirement for proper topography input is '''zt'''. 
+'''The minimum requirement for proper topography input is zt'''.
 
 ||='''Input variable'''  =||='''Type'''  =||='''LOD''' =||='''Explanation / Remarks'''  =||
@@ -174 +174 @@
 === [=#surf '''Surface variables''':] ===
 
-For a proper classification of natural land and water surfaces, [#pavement_type pavement_type], [#soil_type soil_type], [#vegetation_type vegetation_type] and [#water_type water_type] are required, which define bulk parameters for albedo, soil, root distribution, leaf-area density, etc. To enable initialization of the land-surface model with input-file-provided variables, the namelist parameter [../../lsmpar#surface_type surface_type] need to be set to 'netcdf'.  
-In case more than one of the surface types (vegetation, pavement, water) is given at a (x-y)-location, the relative fraction of each of the types must be provided by [#surface_fraction surface_fraction].
-Further, if the [../../usmpar urban-surface model] is applied, also [#building_type building_type] is required, which defines bulk parameters to run the urban-surface model. Please note, for the sake of consistency, at least one of the variables  [#pavement_type pavement_type], [#vegetation_type vegetation_type], [#water_type water_type] or [#building_type building_type] need to be defined at each 'xy' location if the land- and urban-surface model is applied. Further,  in case data is taken from the static input file, both, the land- and urban-surface model need to be either switched on or off. Applying only one of the energy-balance models is not sufficient and will lead to a controlled termination.  \\
+For a proper classification of natural land and water surfaces, [#pavement_type pavement_type], [#soil_type soil_type], [#vegetation_type vegetation_type] and [#water_type water_type] are required, which define bulk parameters for albedo, soil, root distribution, leaf-area density, etc. To enable initialization of the land-surface model with input-file-provided variables, the namelist parameter [../../lsmpar#surface_type surface_type] needs to be set to 'netcdf'.  
+In case more than one of the surface types (vegetation, pavement, water) is given at an (x,y) location, the relative fraction of each of the types must be provided by [#surface_fraction surface_fraction].
+Further, if the [../../usmpar urban-surface model] is applied, also [#building_type building_type] is required, which defines bulk parameters to run the urban-surface model. Please note, for the sake of consistency, at least one of the variables  [#pavement_type pavement_type], [#vegetation_type vegetation_type], [#water_type water_type] or [#building_type building_type] needs to be defined at each (x,y) location if the land- and urban-surface model is applied. Further,  in case data is taken from the static input file, both, the land- and urban-surface model need to be either switched on or off. Applying only one of the energy-balance models is not sufficient and will lead to a controlled termination.  \\
 
 ||='''Input variable'''  =||='''Type'''  =||='''LOD''' =||='''Explanation / Remarks'''  =||