Changes between Version 95 and Version 96 of doc/app/iofiles/pids/static

Timestamp:

Jul 5, 2022 10:09:35 AM (3 years ago)

Author:

suehring

Comment:

--

doc/app/iofiles/pids/static

@@ -358 +358 @@
 }}}
 {{{#!td
-Parameters for the building parameterization. When [#building_type building_type] = 0, all parameters must be set. Otherwise, single parameters for a given [#building_type building_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}. '''building_pars''' becomes only effective if the [wiki:doc/app/urban_surface_parameters urban-surface model] or the [#indoor_model indoor_model] are applied. 
+Parameters for the building parameterization. Otherwise, single parameters for a given [#building_type building_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}. '''building_pars''' becomes only effective if the [wiki:doc/app/urban_surface_parameters urban-surface model] or the [#indoor_model indoor_model] are applied. 
 Building parameters can be distinguished between ground-floor and upper level. For more information, please see [[attachment:wiki:doc/app/iofiles/pids:PALM_input_data_standard.pdf|here]].
 }}}
@@ -408 +408 @@
 {{{#!td
 Parameters required for the bulk pavement parameterization in the
-land surface scheme.
-When [#pavement_type pavement_type] = 0, all parameters must be set. Otherwise, single parameters for a given [#pavement_type pavement_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
+land surface scheme. Single parameters for a given [#pavement_type pavement_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
 }}} 
 |----------------
@@ -426 +425 @@
 Parameters required for the bulk pavement parameterization. 
 For all zsoil levels where '''pavement_subsurface_pars''' is not missing, the settings of the soil model are overwritten, i.e. thermal conductivity and heat capacities are set, and the layers are impermeable for water.
-When [#pavement_type pavement_type] = 0, all parameters must be set. 
 }}} 
 |----------------
@@ -467 +465 @@
 {{{#!td
 Parameters for soil parametrization. 
-When [#soil_type soil_type] = 0, all parameters must be set. Otherwise, 
-single parameters for a given [#soil_type soil_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
+Single parameters for a given [#soil_type soil_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
 In case {{{lod = 1}}}, prescribed parameters are vertically uniform, 
 while in case {{{lod = 2}}} parameters can be set for each layer individually. An overview of the different soil parameters can be found [[attachment:wiki:doc/app/iofiles/pids:PALM_input_data_standard.pdf|here]].
@@ -543 +540 @@
 {{{#!td
 Parameters used for the parameterization of water surfaces. 
-When [#water_type water_type] = 0, all parameters must be set. Otherwise, single parameters for a given [#water_type water_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
+Single parameters for a given [#water_type water_type] can be overwritten, while the remaining parameters must be set to {{{_FillValue}}}.
 }}} 
 |----------------
@@ -628 +625 @@
 {{{#!td
 Root area of the parameterized vegetation in the soil that is set via 
-[#vegetation_type vegetation_type]. When [#vegetation_type vegetation_type] = 0, the '''root_area_density_s''' must be set.
+[#vegetation_type vegetation_type]. 
 }}}
 
@@ -637 +634 @@
 
 ||='''Variable'''  =||='''Type'''    =||='''Attributes''' =||='''Explanation / Remarks'''  =||
-||[=#albedo_pars ''albedo_pars(nalbedo_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="albedo parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for surface albedo. Must be set when [#albedo_type ''albedo_type''] = 0. For details, see [./tables#albedo_pars albedo_pars]. ||
-||[=#building_pars ''building_pars(nbuilding_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="building parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for buildings. Must be set when [#building_type ''building_type''] = 0. For details, see [./tables#building_pars building_pars]. ||
-||[=#pavement_pars ''pavement_pars(npavement_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="pavement surface parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for pavement surfaces. Must be set when [#pavement_type ''pavement_type''] = 0. For details, see [./tables#pavement_pars pavement_pars]. ||
-||[=#pavement_subsurface_pars ''pavement_subsurface_pars(npavement_subsurface_pars,zsoil,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="pavement subsurface parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for pavement sub-surface properties. Must be set when [#pavement_type ''pavement_type''] = 0. For details, see [./tables#pavement_subsurface_pars pavement_subsurface_pars]. ||
-||[=#vegetation_pars ''vegetation_pars(nvegetation_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="vegetation parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for unresolved vegetation. Must be set when [#vegetation_type ''vegetation_type''] = 0. For details, see [./tables#vegetation_pars vegetation_pars]. ||
-||[=#water_pars ''water_pars(nwater_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="water parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for water bodies. Must be set when [#water_type ''water_type''] = 0. For details, see [./tables#water_pars water_pars]. ||
+||[=#albedo_pars ''albedo_pars(nalbedo_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="albedo parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for surface albedo. For details, see [./tables#albedo_pars albedo_pars]. ||
+||[=#building_pars ''building_pars(nbuilding_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="building parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for buildings. For details, see [./tables#building_pars building_pars]. ||
+||[=#pavement_pars ''pavement_pars(npavement_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="pavement surface parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for pavement surfaces. For details, see [./tables#pavement_pars pavement_pars]. ||
+||[=#pavement_subsurface_pars ''pavement_subsurface_pars(npavement_subsurface_pars,zsoil,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="pavement subsurface parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for pavement sub-surface properties. For details, see [./tables#pavement_subsurface_pars pavement_subsurface_pars]. ||
+||[=#vegetation_pars ''vegetation_pars(nvegetation_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="vegetation parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for unresolved vegetation. For details, see [./tables#vegetation_pars vegetation_pars]. ||
+||[=#water_pars ''water_pars(nwater_pars,y,x)'']     || NC_FLOAT    ||{{{_FillValue=-9999.f}}} (*)\\{{{coordinates}}}\\{{{grid_mapping}}}\\{{{long_name="water parameters"}}}\\{{{res_orig}}}\\{{{source}}} || Pixel-specific settings for water bodies. For details, see [./tables#water_pars water_pars]. ||
 
 '''(*) are mandatory attributes'''